![Alexander Aring](/assets/img/avatar_default.png)
This patch removes the virtual interface structure from sub if data struct, because it isn't used anywhere. This structure could be useful for give per interface information at softmac driver layer. Nevertheless there exist no use case currently and it contains the interface type information currently. This information is also stored inside wpan dev which is now used to check on the wpan dev interface type. Signed-off-by: Alexander Aring <alex.aring@gmail.com> Reviewed-by: Varka Bhadram <varkabhadram@gmail.com> Acked-by: Varka Bhadram <varkabhadram@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
333 lines
11 KiB
C
333 lines
11 KiB
C
/*
|
|
* IEEE802.15.4-2003 specification
|
|
*
|
|
* Copyright (C) 2007-2012 Siemens AG
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2
|
|
* as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
*/
|
|
#ifndef NET_MAC802154_H
|
|
#define NET_MAC802154_H
|
|
|
|
#include <net/af_ieee802154.h>
|
|
#include <linux/ieee802154.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/unaligned/memmove.h>
|
|
|
|
#include <net/cfg802154.h>
|
|
|
|
/* General MAC frame format:
|
|
* 2 bytes: Frame Control
|
|
* 1 byte: Sequence Number
|
|
* 20 bytes: Addressing fields
|
|
* 14 bytes: Auxiliary Security Header
|
|
*/
|
|
#define MAC802154_FRAME_HARD_HEADER_LEN (2 + 1 + 20 + 14)
|
|
|
|
/* The following flags are used to indicate changed address settings from
|
|
* the stack to the hardware.
|
|
*/
|
|
|
|
/* indicates that the Short Address changed */
|
|
#define IEEE802154_AFILT_SADDR_CHANGED 0x00000001
|
|
/* indicates that the IEEE Address changed */
|
|
#define IEEE802154_AFILT_IEEEADDR_CHANGED 0x00000002
|
|
/* indicates that the PAN ID changed */
|
|
#define IEEE802154_AFILT_PANID_CHANGED 0x00000004
|
|
/* indicates that PAN Coordinator status changed */
|
|
#define IEEE802154_AFILT_PANC_CHANGED 0x00000008
|
|
|
|
struct ieee802154_hw_addr_filt {
|
|
__le16 pan_id; /* Each independent PAN selects a unique
|
|
* identifier. This PAN id allows communication
|
|
* between devices within a network using short
|
|
* addresses and enables transmissions between
|
|
* devices across independent networks.
|
|
*/
|
|
__le16 short_addr;
|
|
__le64 ieee_addr;
|
|
u8 pan_coord;
|
|
};
|
|
|
|
struct ieee802154_hw {
|
|
/* filled by the driver */
|
|
int extra_tx_headroom;
|
|
u32 flags;
|
|
struct device *parent;
|
|
|
|
/* filled by mac802154 core */
|
|
struct ieee802154_hw_addr_filt hw_filt;
|
|
void *priv;
|
|
struct wpan_phy *phy;
|
|
};
|
|
|
|
/* Checksum is in hardware and is omitted from a packet
|
|
*
|
|
* These following flags are used to indicate hardware capabilities to
|
|
* the stack. Generally, flags here should have their meaning
|
|
* done in a way that the simplest hardware doesn't need setting
|
|
* any particular flags. There are some exceptions to this rule,
|
|
* however, so you are advised to review these flags carefully.
|
|
*/
|
|
|
|
/* Indicates that xmitter will add FCS on it's own. */
|
|
#define IEEE802154_HW_TX_OMIT_CKSUM 0x00000001
|
|
/* Indicates that receiver will autorespond with ACK frames. */
|
|
#define IEEE802154_HW_AACK 0x00000002
|
|
/* Indicates that transceiver will support listen before transmit. */
|
|
#define IEEE802154_HW_LBT 0x00000004
|
|
/* Indicates that transceiver will support csma (max_be, min_be, csma retries)
|
|
* settings. */
|
|
#define IEEE802154_HW_CSMA_PARAMS 0x00000008
|
|
/* Indicates that transceiver will support ARET frame retries setting. */
|
|
#define IEEE802154_HW_FRAME_RETRIES 0x00000010
|
|
/* Indicates that transceiver will support hardware address filter setting. */
|
|
#define IEEE802154_HW_AFILT 0x00000020
|
|
/* Indicates that transceiver will support promiscuous mode setting. */
|
|
#define IEEE802154_HW_PROMISCUOUS 0x00000040
|
|
/* Indicates that receiver omits FCS. */
|
|
#define IEEE802154_HW_RX_OMIT_CKSUM 0x00000080
|
|
/* Indicates that receiver will not filter frames with bad checksum. */
|
|
#define IEEE802154_HW_RX_DROP_BAD_CKSUM 0x00000100
|
|
|
|
/* Indicates that receiver omits FCS and xmitter will add FCS on it's own. */
|
|
#define IEEE802154_HW_OMIT_CKSUM (IEEE802154_HW_TX_OMIT_CKSUM | \
|
|
IEEE802154_HW_RX_OMIT_CKSUM)
|
|
|
|
/* struct ieee802154_ops - callbacks from mac802154 to the driver
|
|
*
|
|
* This structure contains various callbacks that the driver may
|
|
* handle or, in some cases, must handle, for example to transmit
|
|
* a frame.
|
|
*
|
|
* start: Handler that 802.15.4 module calls for device initialization.
|
|
* This function is called before the first interface is attached.
|
|
*
|
|
* stop: Handler that 802.15.4 module calls for device cleanup.
|
|
* This function is called after the last interface is removed.
|
|
*
|
|
* xmit_sync:
|
|
* Handler that 802.15.4 module calls for each transmitted frame.
|
|
* skb cntains the buffer starting from the IEEE 802.15.4 header.
|
|
* The low-level driver should send the frame based on available
|
|
* configuration. This is called by a workqueue and useful for
|
|
* synchronous 802.15.4 drivers.
|
|
* This function should return zero or negative errno.
|
|
*
|
|
* WARNING:
|
|
* This will be deprecated soon. We don't accept synced xmit callbacks
|
|
* drivers anymore.
|
|
*
|
|
* xmit_async:
|
|
* Handler that 802.15.4 module calls for each transmitted frame.
|
|
* skb cntains the buffer starting from the IEEE 802.15.4 header.
|
|
* The low-level driver should send the frame based on available
|
|
* configuration.
|
|
* This function should return zero or negative errno.
|
|
*
|
|
* ed: Handler that 802.15.4 module calls for Energy Detection.
|
|
* This function should place the value for detected energy
|
|
* (usually device-dependant) in the level pointer and return
|
|
* either zero or negative errno. Called with pib_lock held.
|
|
*
|
|
* set_channel:
|
|
* Set radio for listening on specific channel.
|
|
* Set the device for listening on specified channel.
|
|
* Returns either zero, or negative errno. Called with pib_lock held.
|
|
*
|
|
* set_hw_addr_filt:
|
|
* Set radio for listening on specific address.
|
|
* Set the device for listening on specified address.
|
|
* Returns either zero, or negative errno.
|
|
*
|
|
* set_txpower:
|
|
* Set radio transmit power in mBm. Called with pib_lock held.
|
|
* Returns either zero, or negative errno.
|
|
*
|
|
* set_lbt
|
|
* Enables or disables listen before talk on the device. Called with
|
|
* pib_lock held.
|
|
* Returns either zero, or negative errno.
|
|
*
|
|
* set_cca_mode
|
|
* Sets the CCA mode used by the device. Called with pib_lock held.
|
|
* Returns either zero, or negative errno.
|
|
*
|
|
* set_cca_ed_level
|
|
* Sets the CCA energy detection threshold in mBm. Called with pib_lock
|
|
* held.
|
|
* Returns either zero, or negative errno.
|
|
*
|
|
* set_csma_params
|
|
* Sets the CSMA parameter set for the PHY. Called with pib_lock held.
|
|
* Returns either zero, or negative errno.
|
|
*
|
|
* set_frame_retries
|
|
* Sets the retransmission attempt limit. Called with pib_lock held.
|
|
* Returns either zero, or negative errno.
|
|
*
|
|
* set_promiscuous_mode
|
|
* Enables or disable promiscuous mode.
|
|
*/
|
|
struct ieee802154_ops {
|
|
struct module *owner;
|
|
int (*start)(struct ieee802154_hw *hw);
|
|
void (*stop)(struct ieee802154_hw *hw);
|
|
int (*xmit_sync)(struct ieee802154_hw *hw,
|
|
struct sk_buff *skb);
|
|
int (*xmit_async)(struct ieee802154_hw *hw,
|
|
struct sk_buff *skb);
|
|
int (*ed)(struct ieee802154_hw *hw, u8 *level);
|
|
int (*set_channel)(struct ieee802154_hw *hw, u8 page,
|
|
u8 channel);
|
|
int (*set_hw_addr_filt)(struct ieee802154_hw *hw,
|
|
struct ieee802154_hw_addr_filt *filt,
|
|
unsigned long changed);
|
|
int (*set_txpower)(struct ieee802154_hw *hw, s32 mbm);
|
|
int (*set_lbt)(struct ieee802154_hw *hw, bool on);
|
|
int (*set_cca_mode)(struct ieee802154_hw *hw,
|
|
const struct wpan_phy_cca *cca);
|
|
int (*set_cca_ed_level)(struct ieee802154_hw *hw, s32 mbm);
|
|
int (*set_csma_params)(struct ieee802154_hw *hw,
|
|
u8 min_be, u8 max_be, u8 retries);
|
|
int (*set_frame_retries)(struct ieee802154_hw *hw,
|
|
s8 retries);
|
|
int (*set_promiscuous_mode)(struct ieee802154_hw *hw,
|
|
const bool on);
|
|
};
|
|
|
|
/**
|
|
* ieee802154_be64_to_le64 - copies and convert be64 to le64
|
|
* @le64_dst: le64 destination pointer
|
|
* @be64_src: be64 source pointer
|
|
*/
|
|
static inline void ieee802154_be64_to_le64(void *le64_dst, const void *be64_src)
|
|
{
|
|
__put_unaligned_memmove64(swab64p(be64_src), le64_dst);
|
|
}
|
|
|
|
/**
|
|
* ieee802154_le64_to_be64 - copies and convert le64 to be64
|
|
* @be64_dst: be64 destination pointer
|
|
* @le64_src: le64 source pointer
|
|
*/
|
|
static inline void ieee802154_le64_to_be64(void *be64_dst, const void *le64_src)
|
|
{
|
|
__put_unaligned_memmove64(swab64p(le64_src), be64_dst);
|
|
}
|
|
|
|
/**
|
|
* ieee802154_alloc_hw - Allocate a new hardware device
|
|
*
|
|
* This must be called once for each hardware device. The returned pointer
|
|
* must be used to refer to this device when calling other functions.
|
|
* mac802154 allocates a private data area for the driver pointed to by
|
|
* @priv in &struct ieee802154_hw, the size of this area is given as
|
|
* @priv_data_len.
|
|
*
|
|
* @priv_data_len: length of private data
|
|
* @ops: callbacks for this device
|
|
*
|
|
* Return: A pointer to the new hardware device, or %NULL on error.
|
|
*/
|
|
struct ieee802154_hw *
|
|
ieee802154_alloc_hw(size_t priv_data_len, const struct ieee802154_ops *ops);
|
|
|
|
/**
|
|
* ieee802154_free_hw - free hardware descriptor
|
|
*
|
|
* This function frees everything that was allocated, including the
|
|
* private data for the driver. You must call ieee802154_unregister_hw()
|
|
* before calling this function.
|
|
*
|
|
* @hw: the hardware to free
|
|
*/
|
|
void ieee802154_free_hw(struct ieee802154_hw *hw);
|
|
|
|
/**
|
|
* ieee802154_register_hw - Register hardware device
|
|
*
|
|
* You must call this function before any other functions in
|
|
* mac802154. Note that before a hardware can be registered, you
|
|
* need to fill the contained wpan_phy's information.
|
|
*
|
|
* @hw: the device to register as returned by ieee802154_alloc_hw()
|
|
*
|
|
* Return: 0 on success. An error code otherwise.
|
|
*/
|
|
int ieee802154_register_hw(struct ieee802154_hw *hw);
|
|
|
|
/**
|
|
* ieee802154_unregister_hw - Unregister a hardware device
|
|
*
|
|
* This function instructs mac802154 to free allocated resources
|
|
* and unregister netdevices from the networking subsystem.
|
|
*
|
|
* @hw: the hardware to unregister
|
|
*/
|
|
void ieee802154_unregister_hw(struct ieee802154_hw *hw);
|
|
|
|
/**
|
|
* ieee802154_rx - receive frame
|
|
*
|
|
* Use this function to hand received frames to mac802154. The receive
|
|
* buffer in @skb must start with an IEEE 802.15.4 header. In case of a
|
|
* paged @skb is used, the driver is recommended to put the ieee802154
|
|
* header of the frame on the linear part of the @skb to avoid memory
|
|
* allocation and/or memcpy by the stack.
|
|
*
|
|
* This function may not be called in IRQ context. Calls to this function
|
|
* for a single hardware must be synchronized against each other.
|
|
*
|
|
* @hw: the hardware this frame came in on
|
|
* @skb: the buffer to receive, owned by mac802154 after this call
|
|
*/
|
|
void ieee802154_rx(struct ieee802154_hw *hw, struct sk_buff *skb);
|
|
|
|
/**
|
|
* ieee802154_rx_irqsafe - receive frame
|
|
*
|
|
* Like ieee802154_rx() but can be called in IRQ context
|
|
* (internally defers to a tasklet.)
|
|
*
|
|
* @hw: the hardware this frame came in on
|
|
* @skb: the buffer to receive, owned by mac802154 after this call
|
|
* @lqi: link quality indicator
|
|
*/
|
|
void ieee802154_rx_irqsafe(struct ieee802154_hw *hw, struct sk_buff *skb,
|
|
u8 lqi);
|
|
/**
|
|
* ieee802154_wake_queue - wake ieee802154 queue
|
|
* @hw: pointer as obtained from ieee802154_alloc_hw().
|
|
*
|
|
* Drivers should use this function instead of netif_wake_queue.
|
|
*/
|
|
void ieee802154_wake_queue(struct ieee802154_hw *hw);
|
|
|
|
/**
|
|
* ieee802154_stop_queue - stop ieee802154 queue
|
|
* @hw: pointer as obtained from ieee802154_alloc_hw().
|
|
*
|
|
* Drivers should use this function instead of netif_stop_queue.
|
|
*/
|
|
void ieee802154_stop_queue(struct ieee802154_hw *hw);
|
|
|
|
/**
|
|
* ieee802154_xmit_complete - frame transmission complete
|
|
*
|
|
* @hw: pointer as obtained from ieee802154_alloc_hw().
|
|
* @skb: buffer for transmission
|
|
* @ifs_handling: indicate interframe space handling
|
|
*/
|
|
void ieee802154_xmit_complete(struct ieee802154_hw *hw, struct sk_buff *skb,
|
|
bool ifs_handling);
|
|
|
|
#endif /* NET_MAC802154_H */
|