1
0
Fork 0
alistair23-linux/drivers/usb
Mathias Nyman 488dc16491 xhci: remove WARN_ON if dma mask is not set for platform devices
The warn on is a bit too much, we will anyway set the dma mask if not set
previously.

The main reason for this fix is that 4.10-rc1  has a dwc3 change that
pass a parent sysdev dev pointer instead of setting the dma mask of
its xhci platform device. xhci platform driver can then get more
attributes from the sysdev than just the dma mask.

The usb core and xhci changes are not yet in 4.10, and a fix like
this was preferred instead of taking those big changes this late in
the rc-cycle.

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-20 14:55:20 +01:00
..
atm Replace <asm/uaccess.h> with <linux/uaccess.h> globally 2016-12-24 11:46:01 -08:00
c67x00 c67x00-hcd: use USB_DT_HUB 2015-04-03 19:03:16 +02:00
chipidea ktime: Get rid of the union 2016-12-25 17:21:22 +01:00
class USB: cdc-acm: add device id for GW Instek AFG-125 2016-12-05 16:32:51 +01:00
common usb: patches for v4.9 merge window 2016-09-14 20:37:50 +02:00
core USB: fix problems with duplicate endpoint addresses 2017-01-05 19:38:40 +01:00
dwc2 usb: dwc2: host: fix Wmaybe-uninitialized warning 2017-01-16 11:11:51 +02:00
dwc3 usb: dwc3: exynos fix axius clock error path to do cleanup 2017-01-12 10:03:59 +02:00
early treewide: remove redundant #include <linux/kconfig.h> 2016-10-11 15:06:33 -07:00
gadget usb: gadget: udc: atmel: remove memory leak 2017-01-12 10:05:04 +02:00
host xhci: remove WARN_ON if dma mask is not set for platform devices 2017-01-20 14:55:20 +01:00
image usb: microtek: Use "foo *bar" instead of "foo * bar". 2016-06-07 22:18:39 -07:00
isp1760 usb: Convert pr_warning to pr_warn 2016-11-03 10:38:36 +02:00
misc Replace <asm/uaccess.h> with <linux/uaccess.h> globally 2016-12-24 11:46:01 -08:00
mon Replace <asm/uaccess.h> with <linux/uaccess.h> globally 2016-12-24 11:46:01 -08:00
mtu3 usb: mtu3: fix U3 port link issue 2016-12-07 09:37:24 +01:00
musb usb: musb: fix runtime PM in debugfs 2017-01-10 18:26:19 +01:00
phy usb: twl6030-usb: make driver DT only 2016-11-18 13:54:44 +02:00
renesas_usbhs usb: renesas_usbhs: cleanup with list_first_entry_or_null() 2016-11-03 10:38:37 +02:00
serial USB: serial: ch341: fix control-message error handling 2017-01-11 12:08:57 +01:00
storage usb: storage: unusual_uas: Add JMicron JMS56x to unusual device 2017-01-05 19:24:55 +01:00
usbip usbip: fix warning in vhci_hcd_probe/lockdep_init_map 2016-12-06 08:37:41 +01:00
wusbcore wusbcore: Fix one more crypto-on-the-stack bug 2017-01-10 17:03:42 +01:00
Kconfig usb: Add MediaTek USB3 DRD driver 2016-10-27 17:02:41 +02:00
Makefile usb: Add MediaTek USB3 DRD driver 2016-10-27 17:02:41 +02:00
README
usb-skeleton.c usb: usb-skeleton: don't print on ENOMEM 2016-08-30 19:17:39 +02:00

README

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("hub_wq").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.