![Liam Girdwood](/assets/img/avatar_default.png)
This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
402 lines
9 KiB
C
402 lines
9 KiB
C
/*
|
|
* wm8728.c -- WM8728 ALSA SoC Audio driver
|
|
*
|
|
* Copyright 2008 Wolfson Microelectronics plc
|
|
*
|
|
* Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/slab.h>
|
|
#include <sound/core.h>
|
|
#include <sound/pcm.h>
|
|
#include <sound/pcm_params.h>
|
|
#include <sound/soc.h>
|
|
#include <sound/soc-dapm.h>
|
|
#include <sound/initval.h>
|
|
#include <sound/tlv.h>
|
|
|
|
#include "wm8728.h"
|
|
|
|
/*
|
|
* We can't read the WM8728 register space so we cache them instead.
|
|
* Note that the defaults here aren't the physical defaults, we latch
|
|
* the volume update bits, mute the output and enable infinite zero
|
|
* detect.
|
|
*/
|
|
static const u16 wm8728_reg_defaults[] = {
|
|
0x1ff,
|
|
0x1ff,
|
|
0x001,
|
|
0x100,
|
|
};
|
|
|
|
/* codec private data */
|
|
struct wm8728_priv {
|
|
enum snd_soc_control_type control_type;
|
|
void *control_data;
|
|
};
|
|
|
|
static const DECLARE_TLV_DB_SCALE(wm8728_tlv, -12750, 50, 1);
|
|
|
|
static const struct snd_kcontrol_new wm8728_snd_controls[] = {
|
|
|
|
SOC_DOUBLE_R_TLV("Digital Playback Volume", WM8728_DACLVOL, WM8728_DACRVOL,
|
|
0, 255, 0, wm8728_tlv),
|
|
|
|
SOC_SINGLE("Deemphasis", WM8728_DACCTL, 1, 1, 0),
|
|
};
|
|
|
|
/*
|
|
* DAPM controls.
|
|
*/
|
|
static const struct snd_soc_dapm_widget wm8728_dapm_widgets[] = {
|
|
SND_SOC_DAPM_DAC("DAC", "HiFi Playback", SND_SOC_NOPM, 0, 0),
|
|
SND_SOC_DAPM_OUTPUT("VOUTL"),
|
|
SND_SOC_DAPM_OUTPUT("VOUTR"),
|
|
};
|
|
|
|
static const struct snd_soc_dapm_route intercon[] = {
|
|
{"VOUTL", NULL, "DAC"},
|
|
{"VOUTR", NULL, "DAC"},
|
|
};
|
|
|
|
static int wm8728_add_widgets(struct snd_soc_codec *codec)
|
|
{
|
|
snd_soc_dapm_new_controls(codec, wm8728_dapm_widgets,
|
|
ARRAY_SIZE(wm8728_dapm_widgets));
|
|
|
|
snd_soc_dapm_add_routes(codec, intercon, ARRAY_SIZE(intercon));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm8728_mute(struct snd_soc_dai *dai, int mute)
|
|
{
|
|
struct snd_soc_codec *codec = dai->codec;
|
|
u16 mute_reg = snd_soc_read(codec, WM8728_DACCTL);
|
|
|
|
if (mute)
|
|
snd_soc_write(codec, WM8728_DACCTL, mute_reg | 1);
|
|
else
|
|
snd_soc_write(codec, WM8728_DACCTL, mute_reg & ~1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm8728_hw_params(struct snd_pcm_substream *substream,
|
|
struct snd_pcm_hw_params *params,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct snd_soc_pcm_runtime *rtd = substream->private_data;
|
|
struct snd_soc_codec *codec = rtd->codec;
|
|
u16 dac = snd_soc_read(codec, WM8728_DACCTL);
|
|
|
|
dac &= ~0x18;
|
|
|
|
switch (params_format(params)) {
|
|
case SNDRV_PCM_FORMAT_S16_LE:
|
|
break;
|
|
case SNDRV_PCM_FORMAT_S20_3LE:
|
|
dac |= 0x10;
|
|
break;
|
|
case SNDRV_PCM_FORMAT_S24_LE:
|
|
dac |= 0x08;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
snd_soc_write(codec, WM8728_DACCTL, dac);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm8728_set_dai_fmt(struct snd_soc_dai *codec_dai,
|
|
unsigned int fmt)
|
|
{
|
|
struct snd_soc_codec *codec = codec_dai->codec;
|
|
u16 iface = snd_soc_read(codec, WM8728_IFCTL);
|
|
|
|
/* Currently only I2S is supported by the driver, though the
|
|
* hardware is more flexible.
|
|
*/
|
|
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
|
|
case SND_SOC_DAIFMT_I2S:
|
|
iface |= 1;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* The hardware only support full slave mode */
|
|
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
|
|
case SND_SOC_DAIFMT_CBS_CFS:
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
|
|
case SND_SOC_DAIFMT_NB_NF:
|
|
iface &= ~0x22;
|
|
break;
|
|
case SND_SOC_DAIFMT_IB_NF:
|
|
iface |= 0x20;
|
|
iface &= ~0x02;
|
|
break;
|
|
case SND_SOC_DAIFMT_NB_IF:
|
|
iface |= 0x02;
|
|
iface &= ~0x20;
|
|
break;
|
|
case SND_SOC_DAIFMT_IB_IF:
|
|
iface |= 0x22;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
snd_soc_write(codec, WM8728_IFCTL, iface);
|
|
return 0;
|
|
}
|
|
|
|
static int wm8728_set_bias_level(struct snd_soc_codec *codec,
|
|
enum snd_soc_bias_level level)
|
|
{
|
|
u16 reg;
|
|
int i;
|
|
|
|
switch (level) {
|
|
case SND_SOC_BIAS_ON:
|
|
case SND_SOC_BIAS_PREPARE:
|
|
case SND_SOC_BIAS_STANDBY:
|
|
if (codec->bias_level == SND_SOC_BIAS_OFF) {
|
|
/* Power everything up... */
|
|
reg = snd_soc_read(codec, WM8728_DACCTL);
|
|
snd_soc_write(codec, WM8728_DACCTL, reg & ~0x4);
|
|
|
|
/* ..then sync in the register cache. */
|
|
for (i = 0; i < ARRAY_SIZE(wm8728_reg_defaults); i++)
|
|
snd_soc_write(codec, i,
|
|
snd_soc_read(codec, i));
|
|
}
|
|
break;
|
|
|
|
case SND_SOC_BIAS_OFF:
|
|
reg = snd_soc_read(codec, WM8728_DACCTL);
|
|
snd_soc_write(codec, WM8728_DACCTL, reg | 0x4);
|
|
break;
|
|
}
|
|
codec->bias_level = level;
|
|
return 0;
|
|
}
|
|
|
|
#define WM8728_RATES (SNDRV_PCM_RATE_8000_192000)
|
|
|
|
#define WM8728_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\
|
|
SNDRV_PCM_FMTBIT_S24_LE)
|
|
|
|
static struct snd_soc_dai_ops wm8728_dai_ops = {
|
|
.hw_params = wm8728_hw_params,
|
|
.digital_mute = wm8728_mute,
|
|
.set_fmt = wm8728_set_dai_fmt,
|
|
};
|
|
|
|
static struct snd_soc_dai_driver wm8728_dai = {
|
|
.name = "wm8728-hifi",
|
|
.playback = {
|
|
.stream_name = "Playback",
|
|
.channels_min = 2,
|
|
.channels_max = 2,
|
|
.rates = WM8728_RATES,
|
|
.formats = WM8728_FORMATS,
|
|
},
|
|
.ops = &wm8728_dai_ops,
|
|
};
|
|
|
|
static int wm8728_suspend(struct snd_soc_codec *codec, pm_message_t state)
|
|
{
|
|
wm8728_set_bias_level(codec, SND_SOC_BIAS_OFF);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm8728_resume(struct snd_soc_codec *codec)
|
|
{
|
|
wm8728_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wm8728_probe(struct snd_soc_codec *codec)
|
|
{
|
|
struct wm8728_priv *wm8728 = snd_soc_codec_get_drvdata(codec);
|
|
int ret;
|
|
|
|
codec->control_data = wm8728->control_data;
|
|
ret = snd_soc_codec_set_cache_io(codec, 7, 9, wm8728->control_type);
|
|
if (ret < 0) {
|
|
printk(KERN_ERR "wm8728: failed to configure cache I/O: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
/* power on device */
|
|
wm8728_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
|
|
|
|
snd_soc_add_controls(codec, wm8728_snd_controls,
|
|
ARRAY_SIZE(wm8728_snd_controls));
|
|
wm8728_add_widgets(codec);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int wm8728_remove(struct snd_soc_codec *codec)
|
|
{
|
|
wm8728_set_bias_level(codec, SND_SOC_BIAS_OFF);
|
|
return 0;
|
|
}
|
|
|
|
static struct snd_soc_codec_driver soc_codec_dev_wm8728 = {
|
|
.probe = wm8728_probe,
|
|
.remove = wm8728_remove,
|
|
.suspend = wm8728_suspend,
|
|
.resume = wm8728_resume,
|
|
.set_bias_level = wm8728_set_bias_level,
|
|
.reg_cache_size = sizeof(wm8728_reg_defaults),
|
|
.reg_word_size = sizeof(u16),
|
|
.reg_cache_default = wm8728_reg_defaults,
|
|
};
|
|
|
|
#if defined(CONFIG_SPI_MASTER)
|
|
static int __devinit wm8728_spi_probe(struct spi_device *spi)
|
|
{
|
|
struct wm8728_priv *wm8728;
|
|
int ret;
|
|
|
|
wm8728 = kzalloc(sizeof(struct wm8728_priv), GFP_KERNEL);
|
|
if (wm8728 == NULL)
|
|
return -ENOMEM;
|
|
|
|
wm8728->control_data = spi;
|
|
wm8728->control_type = SND_SOC_SPI;
|
|
spi_set_drvdata(spi, wm8728);
|
|
|
|
ret = snd_soc_register_codec(&spi->dev,
|
|
&soc_codec_dev_wm8728, &wm8728_dai, 1);
|
|
if (ret < 0)
|
|
kfree(wm8728);
|
|
return ret;
|
|
}
|
|
|
|
static int __devexit wm8728_spi_remove(struct spi_device *spi)
|
|
{
|
|
snd_soc_unregister_codec(&spi->dev);
|
|
kfree(spi_get_drvdata(spi));
|
|
return 0;
|
|
}
|
|
|
|
static struct spi_driver wm8728_spi_driver = {
|
|
.driver = {
|
|
.name = "wm8728-codec",
|
|
.bus = &spi_bus_type,
|
|
.owner = THIS_MODULE,
|
|
},
|
|
.probe = wm8728_spi_probe,
|
|
.remove = __devexit_p(wm8728_spi_remove),
|
|
};
|
|
#endif /* CONFIG_SPI_MASTER */
|
|
|
|
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
|
|
static __devinit int wm8728_i2c_probe(struct i2c_client *i2c,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct wm8728_priv *wm8728;
|
|
int ret;
|
|
|
|
wm8728 = kzalloc(sizeof(struct wm8728_priv), GFP_KERNEL);
|
|
if (wm8728 == NULL)
|
|
return -ENOMEM;
|
|
|
|
i2c_set_clientdata(i2c, wm8728);
|
|
wm8728->control_data = i2c;
|
|
wm8728->control_type = SND_SOC_I2C;
|
|
|
|
ret = snd_soc_register_codec(&i2c->dev,
|
|
&soc_codec_dev_wm8728, &wm8728_dai, 1);
|
|
if (ret < 0)
|
|
kfree(wm8728);
|
|
return ret;
|
|
}
|
|
|
|
static __devexit int wm8728_i2c_remove(struct i2c_client *client)
|
|
{
|
|
snd_soc_unregister_codec(&client->dev);
|
|
kfree(i2c_get_clientdata(client));
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id wm8728_i2c_id[] = {
|
|
{ "wm8728", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, wm8728_i2c_id);
|
|
|
|
static struct i2c_driver wm8728_i2c_driver = {
|
|
.driver = {
|
|
.name = "wm8728-codec",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
.probe = wm8728_i2c_probe,
|
|
.remove = __devexit_p(wm8728_i2c_remove),
|
|
.id_table = wm8728_i2c_id,
|
|
};
|
|
#endif
|
|
|
|
static int __init wm8728_modinit(void)
|
|
{
|
|
int ret = 0;
|
|
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
|
|
ret = i2c_add_driver(&wm8728_i2c_driver);
|
|
if (ret != 0) {
|
|
printk(KERN_ERR "Failed to register wm8728 I2C driver: %d\n",
|
|
ret);
|
|
}
|
|
#endif
|
|
#if defined(CONFIG_SPI_MASTER)
|
|
ret = spi_register_driver(&wm8728_spi_driver);
|
|
if (ret != 0) {
|
|
printk(KERN_ERR "Failed to register wm8728 SPI driver: %d\n",
|
|
ret);
|
|
}
|
|
#endif
|
|
return ret;
|
|
}
|
|
module_init(wm8728_modinit);
|
|
|
|
static void __exit wm8728_exit(void)
|
|
{
|
|
#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
|
|
i2c_del_driver(&wm8728_i2c_driver);
|
|
#endif
|
|
#if defined(CONFIG_SPI_MASTER)
|
|
spi_unregister_driver(&wm8728_spi_driver);
|
|
#endif
|
|
}
|
|
module_exit(wm8728_exit);
|
|
|
|
MODULE_DESCRIPTION("ASoC WM8728 driver");
|
|
MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
|
|
MODULE_LICENSE("GPL");
|