alistair23-linux/arch/arm/common/timer-sp.c
Russell King 23828a7a97 clockevents: ARM sp804: obtain sp804 timer rate via clks
This allows platforms to specify the rate of the SP804 clockevent via
the clk subsystem.  While ARM boards clock these at 1MHz, BCMRing also
has SP804 timers but are clocked at different rates.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-23 18:04:53 +01:00

173 lines
4.2 KiB
C

/*
* linux/arch/arm/common/timer-sp.c
*
* Copyright (C) 1999 - 2003 ARM Limited
* Copyright (C) 2000 Deep Blue Solutions Ltd
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/clk.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
#include <linux/err.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <asm/hardware/arm_timer.h>
static long __init sp804_get_clock_rate(const char *name)
{
struct clk *clk;
long rate;
int err;
clk = clk_get_sys("sp804", name);
if (IS_ERR(clk)) {
pr_err("sp804: %s clock not found: %d\n", name,
(int)PTR_ERR(clk));
return PTR_ERR(clk);
}
err = clk_enable(clk);
if (err) {
pr_err("sp804: %s clock failed to enable: %d\n", name, err);
clk_put(clk);
return err;
}
rate = clk_get_rate(clk);
if (rate < 0) {
pr_err("sp804: %s clock failed to get rate: %ld\n", name, rate);
clk_disable(clk);
clk_put(clk);
}
return rate;
}
void __init sp804_clocksource_init(void __iomem *base, const char *name)
{
long rate = sp804_get_clock_rate(name);
if (rate < 0)
return;
/* setup timer 0 as free-running clocksource */
writel(0, base + TIMER_CTRL);
writel(0xffffffff, base + TIMER_LOAD);
writel(0xffffffff, base + TIMER_VALUE);
writel(TIMER_CTRL_32BIT | TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC,
base + TIMER_CTRL);
clocksource_mmio_init(base + TIMER_VALUE, name,
rate, 200, 32, clocksource_mmio_readl_down);
}
static void __iomem *clkevt_base;
static unsigned long clkevt_reload;
/*
* IRQ handler for the timer
*/
static irqreturn_t sp804_timer_interrupt(int irq, void *dev_id)
{
struct clock_event_device *evt = dev_id;
/* clear the interrupt */
writel(1, clkevt_base + TIMER_INTCLR);
evt->event_handler(evt);
return IRQ_HANDLED;
}
static void sp804_set_mode(enum clock_event_mode mode,
struct clock_event_device *evt)
{
unsigned long ctrl = TIMER_CTRL_32BIT | TIMER_CTRL_IE;
writel(ctrl, clkevt_base + TIMER_CTRL);
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
writel(clkevt_reload, clkevt_base + TIMER_LOAD);
ctrl |= TIMER_CTRL_PERIODIC | TIMER_CTRL_ENABLE;
break;
case CLOCK_EVT_MODE_ONESHOT:
/* period set, and timer enabled in 'next_event' hook */
ctrl |= TIMER_CTRL_ONESHOT;
break;
case CLOCK_EVT_MODE_UNUSED:
case CLOCK_EVT_MODE_SHUTDOWN:
default:
break;
}
writel(ctrl, clkevt_base + TIMER_CTRL);
}
static int sp804_set_next_event(unsigned long next,
struct clock_event_device *evt)
{
unsigned long ctrl = readl(clkevt_base + TIMER_CTRL);
writel(next, clkevt_base + TIMER_LOAD);
writel(ctrl | TIMER_CTRL_ENABLE, clkevt_base + TIMER_CTRL);
return 0;
}
static struct clock_event_device sp804_clockevent = {
.shift = 32,
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
.set_mode = sp804_set_mode,
.set_next_event = sp804_set_next_event,
.rating = 300,
.cpumask = cpu_all_mask,
};
static struct irqaction sp804_timer_irq = {
.name = "timer",
.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
.handler = sp804_timer_interrupt,
.dev_id = &sp804_clockevent,
};
void __init sp804_clockevents_init(void __iomem *base, unsigned int irq,
const char *name)
{
struct clock_event_device *evt = &sp804_clockevent;
long rate = sp804_get_clock_rate(name);
if (rate < 0)
return;
clkevt_base = base;
clkevt_reload = DIV_ROUND_CLOSEST(rate, HZ);
evt->name = name;
evt->irq = irq;
evt->mult = div_sc(rate, NSEC_PER_SEC, evt->shift);
evt->max_delta_ns = clockevent_delta2ns(0xffffffff, evt);
evt->min_delta_ns = clockevent_delta2ns(0xf, evt);
setup_irq(irq, &sp804_timer_irq);
clockevents_register_device(evt);
}