![Wolfram Sang](/assets/img/avatar_default.png)
I2C drivers can use the clientdata-pointer to point to private data. As I2C
devices are not really unregistered, but merely detached from their driver, it
used to be the drivers obligation to clear this pointer during remove() or a
failed probe(). As a couple of drivers forgot to do this, it was agreed that it
was cleaner if the i2c-core does this clearance when appropriate, as there is
no guarantee for the lifetime of the clientdata-pointer after remove() anyhow.
This feature was added to the core with commit
e4a7b9b04d
to fix the faulty drivers.
As there is no need anymore to clear the clientdata-pointer, remove all current
occurrences in the drivers to simplify the code and prevent confusion.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Richard Purdie <rpurdie@linux.intel.com>
Acked-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
697 lines
18 KiB
C
697 lines
18 KiB
C
/*
|
|
* Device driver for the i2c thermostat found on the iBook G4, Albook G4
|
|
*
|
|
* Copyright (C) 2003, 2004 Colin Leroy, Rasmus Rohde, Benjamin Herrenschmidt
|
|
*
|
|
* Documentation from
|
|
* http://www.analog.com/UploadedFiles/Data_Sheets/115254175ADT7467_pra.pdf
|
|
* http://www.analog.com/UploadedFiles/Data_Sheets/3686221171167ADT7460_b.pdf
|
|
*
|
|
*/
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/module.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/init.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/wait.h>
|
|
#include <linux/suspend.h>
|
|
#include <linux/kthread.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/freezer.h>
|
|
#include <linux/of_platform.h>
|
|
|
|
#include <asm/prom.h>
|
|
#include <asm/machdep.h>
|
|
#include <asm/io.h>
|
|
#include <asm/system.h>
|
|
#include <asm/sections.h>
|
|
|
|
#undef DEBUG
|
|
|
|
#define CONFIG_REG 0x40
|
|
#define MANUAL_MASK 0xe0
|
|
#define AUTO_MASK 0x20
|
|
#define INVERT_MASK 0x10
|
|
|
|
static u8 TEMP_REG[3] = {0x26, 0x25, 0x27}; /* local, sensor1, sensor2 */
|
|
static u8 LIMIT_REG[3] = {0x6b, 0x6a, 0x6c}; /* local, sensor1, sensor2 */
|
|
static u8 MANUAL_MODE[2] = {0x5c, 0x5d};
|
|
static u8 REM_CONTROL[2] = {0x00, 0x40};
|
|
static u8 FAN_SPEED[2] = {0x28, 0x2a};
|
|
static u8 FAN_SPD_SET[2] = {0x30, 0x31};
|
|
|
|
static u8 default_limits_local[3] = {70, 50, 70}; /* local, sensor1, sensor2 */
|
|
static u8 default_limits_chip[3] = {80, 65, 80}; /* local, sensor1, sensor2 */
|
|
static const char *sensor_location[3];
|
|
|
|
static int limit_adjust;
|
|
static int fan_speed = -1;
|
|
static int verbose;
|
|
|
|
MODULE_AUTHOR("Colin Leroy <colin@colino.net>");
|
|
MODULE_DESCRIPTION("Driver for ADT746x thermostat in iBook G4 and "
|
|
"Powerbook G4 Alu");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
module_param(limit_adjust, int, 0644);
|
|
MODULE_PARM_DESC(limit_adjust,"Adjust maximum temperatures (50 sensor1, 70 sensor2) "
|
|
"by N degrees.");
|
|
|
|
module_param(fan_speed, int, 0644);
|
|
MODULE_PARM_DESC(fan_speed,"Specify starting fan speed (0-255) "
|
|
"(default 64)");
|
|
|
|
module_param(verbose, bool, 0);
|
|
MODULE_PARM_DESC(verbose,"Verbose log operations "
|
|
"(default 0)");
|
|
|
|
struct thermostat {
|
|
struct i2c_client *clt;
|
|
u8 temps[3];
|
|
u8 cached_temp[3];
|
|
u8 initial_limits[3];
|
|
u8 limits[3];
|
|
int last_speed[2];
|
|
int last_var[2];
|
|
int pwm_inv[2];
|
|
};
|
|
|
|
static enum {ADT7460, ADT7467} therm_type;
|
|
static int therm_bus, therm_address;
|
|
static struct of_device * of_dev;
|
|
static struct thermostat* thermostat;
|
|
static struct task_struct *thread_therm = NULL;
|
|
|
|
static void write_both_fan_speed(struct thermostat *th, int speed);
|
|
static void write_fan_speed(struct thermostat *th, int speed, int fan);
|
|
static void thermostat_create_files(void);
|
|
static void thermostat_remove_files(void);
|
|
|
|
static int
|
|
write_reg(struct thermostat* th, int reg, u8 data)
|
|
{
|
|
u8 tmp[2];
|
|
int rc;
|
|
|
|
tmp[0] = reg;
|
|
tmp[1] = data;
|
|
rc = i2c_master_send(th->clt, (const char *)tmp, 2);
|
|
if (rc < 0)
|
|
return rc;
|
|
if (rc != 2)
|
|
return -ENODEV;
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
read_reg(struct thermostat* th, int reg)
|
|
{
|
|
u8 reg_addr, data;
|
|
int rc;
|
|
|
|
reg_addr = (u8)reg;
|
|
rc = i2c_master_send(th->clt, ®_addr, 1);
|
|
if (rc < 0)
|
|
return rc;
|
|
if (rc != 1)
|
|
return -ENODEV;
|
|
rc = i2c_master_recv(th->clt, (char *)&data, 1);
|
|
if (rc < 0)
|
|
return rc;
|
|
return data;
|
|
}
|
|
|
|
static struct i2c_driver thermostat_driver;
|
|
|
|
static int
|
|
attach_thermostat(struct i2c_adapter *adapter)
|
|
{
|
|
unsigned long bus_no;
|
|
struct i2c_board_info info;
|
|
struct i2c_client *client;
|
|
|
|
if (strncmp(adapter->name, "uni-n", 5))
|
|
return -ENODEV;
|
|
bus_no = simple_strtoul(adapter->name + 6, NULL, 10);
|
|
if (bus_no != therm_bus)
|
|
return -ENODEV;
|
|
|
|
memset(&info, 0, sizeof(struct i2c_board_info));
|
|
strlcpy(info.type, "therm_adt746x", I2C_NAME_SIZE);
|
|
info.addr = therm_address;
|
|
client = i2c_new_device(adapter, &info);
|
|
if (!client)
|
|
return -ENODEV;
|
|
|
|
/*
|
|
* Let i2c-core delete that device on driver removal.
|
|
* This is safe because i2c-core holds the core_lock mutex for us.
|
|
*/
|
|
list_add_tail(&client->detected, &thermostat_driver.clients);
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
remove_thermostat(struct i2c_client *client)
|
|
{
|
|
struct thermostat *th = i2c_get_clientdata(client);
|
|
int i;
|
|
|
|
thermostat_remove_files();
|
|
|
|
if (thread_therm != NULL) {
|
|
kthread_stop(thread_therm);
|
|
}
|
|
|
|
printk(KERN_INFO "adt746x: Putting max temperatures back from "
|
|
"%d, %d, %d to %d, %d, %d\n",
|
|
th->limits[0], th->limits[1], th->limits[2],
|
|
th->initial_limits[0], th->initial_limits[1],
|
|
th->initial_limits[2]);
|
|
|
|
for (i = 0; i < 3; i++)
|
|
write_reg(th, LIMIT_REG[i], th->initial_limits[i]);
|
|
|
|
write_both_fan_speed(th, -1);
|
|
|
|
thermostat = NULL;
|
|
|
|
kfree(th);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int read_fan_speed(struct thermostat *th, u8 addr)
|
|
{
|
|
u8 tmp[2];
|
|
u16 res;
|
|
|
|
/* should start with low byte */
|
|
tmp[1] = read_reg(th, addr);
|
|
tmp[0] = read_reg(th, addr + 1);
|
|
|
|
res = tmp[1] + (tmp[0] << 8);
|
|
/* "a value of 0xffff means that the fan has stopped" */
|
|
return (res == 0xffff ? 0 : (90000*60)/res);
|
|
}
|
|
|
|
static void write_both_fan_speed(struct thermostat *th, int speed)
|
|
{
|
|
write_fan_speed(th, speed, 0);
|
|
if (therm_type == ADT7460)
|
|
write_fan_speed(th, speed, 1);
|
|
}
|
|
|
|
static void write_fan_speed(struct thermostat *th, int speed, int fan)
|
|
{
|
|
u8 manual;
|
|
|
|
if (speed > 0xff)
|
|
speed = 0xff;
|
|
else if (speed < -1)
|
|
speed = 0;
|
|
|
|
if (therm_type == ADT7467 && fan == 1)
|
|
return;
|
|
|
|
if (th->last_speed[fan] != speed) {
|
|
if (verbose) {
|
|
if (speed == -1)
|
|
printk(KERN_DEBUG "adt746x: Setting speed to automatic "
|
|
"for %s fan.\n", sensor_location[fan+1]);
|
|
else
|
|
printk(KERN_DEBUG "adt746x: Setting speed to %d "
|
|
"for %s fan.\n", speed, sensor_location[fan+1]);
|
|
}
|
|
} else
|
|
return;
|
|
|
|
if (speed >= 0) {
|
|
manual = read_reg(th, MANUAL_MODE[fan]);
|
|
manual &= ~INVERT_MASK;
|
|
write_reg(th, MANUAL_MODE[fan],
|
|
manual | MANUAL_MASK | th->pwm_inv[fan]);
|
|
write_reg(th, FAN_SPD_SET[fan], speed);
|
|
} else {
|
|
/* back to automatic */
|
|
if(therm_type == ADT7460) {
|
|
manual = read_reg(th,
|
|
MANUAL_MODE[fan]) & (~MANUAL_MASK);
|
|
manual &= ~INVERT_MASK;
|
|
manual |= th->pwm_inv[fan];
|
|
write_reg(th,
|
|
MANUAL_MODE[fan], manual|REM_CONTROL[fan]);
|
|
} else {
|
|
manual = read_reg(th, MANUAL_MODE[fan]);
|
|
manual &= ~INVERT_MASK;
|
|
manual |= th->pwm_inv[fan];
|
|
write_reg(th, MANUAL_MODE[fan], manual&(~AUTO_MASK));
|
|
}
|
|
}
|
|
|
|
th->last_speed[fan] = speed;
|
|
}
|
|
|
|
static void read_sensors(struct thermostat *th)
|
|
{
|
|
int i = 0;
|
|
|
|
for (i = 0; i < 3; i++)
|
|
th->temps[i] = read_reg(th, TEMP_REG[i]);
|
|
}
|
|
|
|
#ifdef DEBUG
|
|
static void display_stats(struct thermostat *th)
|
|
{
|
|
if (th->temps[0] != th->cached_temp[0]
|
|
|| th->temps[1] != th->cached_temp[1]
|
|
|| th->temps[2] != th->cached_temp[2]) {
|
|
printk(KERN_INFO "adt746x: Temperature infos:"
|
|
" thermostats: %d,%d,%d;"
|
|
" limits: %d,%d,%d;"
|
|
" fan speed: %d RPM\n",
|
|
th->temps[0], th->temps[1], th->temps[2],
|
|
th->limits[0], th->limits[1], th->limits[2],
|
|
read_fan_speed(th, FAN_SPEED[0]));
|
|
}
|
|
th->cached_temp[0] = th->temps[0];
|
|
th->cached_temp[1] = th->temps[1];
|
|
th->cached_temp[2] = th->temps[2];
|
|
}
|
|
#endif
|
|
|
|
static void update_fans_speed (struct thermostat *th)
|
|
{
|
|
int lastvar = 0; /* last variation, for iBook */
|
|
int i = 0;
|
|
|
|
/* we don't care about local sensor, so we start at sensor 1 */
|
|
for (i = 1; i < 3; i++) {
|
|
int started = 0;
|
|
int fan_number = (therm_type == ADT7460 && i == 2);
|
|
int var = th->temps[i] - th->limits[i];
|
|
|
|
if (var > -1) {
|
|
int step = (255 - fan_speed) / 7;
|
|
int new_speed = 0;
|
|
|
|
/* hysteresis : change fan speed only if variation is
|
|
* more than two degrees */
|
|
if (abs(var - th->last_var[fan_number]) < 2)
|
|
continue;
|
|
|
|
started = 1;
|
|
new_speed = fan_speed + ((var-1)*step);
|
|
|
|
if (new_speed < fan_speed)
|
|
new_speed = fan_speed;
|
|
if (new_speed > 255)
|
|
new_speed = 255;
|
|
|
|
if (verbose)
|
|
printk(KERN_DEBUG "adt746x: Setting fans speed to %d "
|
|
"(limit exceeded by %d on %s)\n",
|
|
new_speed, var,
|
|
sensor_location[fan_number+1]);
|
|
write_both_fan_speed(th, new_speed);
|
|
th->last_var[fan_number] = var;
|
|
} else if (var < -2) {
|
|
/* don't stop fan if sensor2 is cold and sensor1 is not
|
|
* so cold (lastvar >= -1) */
|
|
if (i == 2 && lastvar < -1) {
|
|
if (th->last_speed[fan_number] != 0)
|
|
if (verbose)
|
|
printk(KERN_DEBUG "adt746x: Stopping "
|
|
"fans.\n");
|
|
write_both_fan_speed(th, 0);
|
|
}
|
|
}
|
|
|
|
lastvar = var;
|
|
|
|
if (started)
|
|
return; /* we don't want to re-stop the fan
|
|
* if sensor1 is heating and sensor2 is not */
|
|
}
|
|
}
|
|
|
|
static int monitor_task(void *arg)
|
|
{
|
|
struct thermostat* th = arg;
|
|
|
|
set_freezable();
|
|
while(!kthread_should_stop()) {
|
|
try_to_freeze();
|
|
msleep_interruptible(2000);
|
|
|
|
#ifndef DEBUG
|
|
if (fan_speed != -1)
|
|
read_sensors(th);
|
|
#else
|
|
read_sensors(th);
|
|
#endif
|
|
|
|
if (fan_speed != -1)
|
|
update_fans_speed(th);
|
|
|
|
#ifdef DEBUG
|
|
display_stats(th);
|
|
#endif
|
|
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void set_limit(struct thermostat *th, int i)
|
|
{
|
|
/* Set sensor1 limit higher to avoid powerdowns */
|
|
th->limits[i] = default_limits_chip[i] + limit_adjust;
|
|
write_reg(th, LIMIT_REG[i], th->limits[i]);
|
|
|
|
/* set our limits to normal */
|
|
th->limits[i] = default_limits_local[i] + limit_adjust;
|
|
}
|
|
|
|
static int probe_thermostat(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct thermostat* th;
|
|
int rc;
|
|
int i;
|
|
|
|
if (thermostat)
|
|
return 0;
|
|
|
|
th = kzalloc(sizeof(struct thermostat), GFP_KERNEL);
|
|
if (!th)
|
|
return -ENOMEM;
|
|
|
|
i2c_set_clientdata(client, th);
|
|
th->clt = client;
|
|
|
|
rc = read_reg(th, CONFIG_REG);
|
|
if (rc < 0) {
|
|
dev_err(&client->dev, "Thermostat failed to read config!\n");
|
|
kfree(th);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* force manual control to start the fan quieter */
|
|
if (fan_speed == -1)
|
|
fan_speed = 64;
|
|
|
|
if(therm_type == ADT7460) {
|
|
printk(KERN_INFO "adt746x: ADT7460 initializing\n");
|
|
/* The 7460 needs to be started explicitly */
|
|
write_reg(th, CONFIG_REG, 1);
|
|
} else
|
|
printk(KERN_INFO "adt746x: ADT7467 initializing\n");
|
|
|
|
for (i = 0; i < 3; i++) {
|
|
th->initial_limits[i] = read_reg(th, LIMIT_REG[i]);
|
|
set_limit(th, i);
|
|
}
|
|
|
|
printk(KERN_INFO "adt746x: Lowering max temperatures from %d, %d, %d"
|
|
" to %d, %d, %d\n",
|
|
th->initial_limits[0], th->initial_limits[1],
|
|
th->initial_limits[2], th->limits[0], th->limits[1],
|
|
th->limits[2]);
|
|
|
|
thermostat = th;
|
|
|
|
/* record invert bit status because fw can corrupt it after suspend */
|
|
th->pwm_inv[0] = read_reg(th, MANUAL_MODE[0]) & INVERT_MASK;
|
|
th->pwm_inv[1] = read_reg(th, MANUAL_MODE[1]) & INVERT_MASK;
|
|
|
|
/* be sure to really write fan speed the first time */
|
|
th->last_speed[0] = -2;
|
|
th->last_speed[1] = -2;
|
|
th->last_var[0] = -80;
|
|
th->last_var[1] = -80;
|
|
|
|
if (fan_speed != -1) {
|
|
/* manual mode, stop fans */
|
|
write_both_fan_speed(th, 0);
|
|
} else {
|
|
/* automatic mode */
|
|
write_both_fan_speed(th, -1);
|
|
}
|
|
|
|
thread_therm = kthread_run(monitor_task, th, "kfand");
|
|
|
|
if (thread_therm == ERR_PTR(-ENOMEM)) {
|
|
printk(KERN_INFO "adt746x: Kthread creation failed\n");
|
|
thread_therm = NULL;
|
|
return -ENOMEM;
|
|
}
|
|
|
|
thermostat_create_files();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id therm_adt746x_id[] = {
|
|
{ "therm_adt746x", 0 },
|
|
{ }
|
|
};
|
|
|
|
static struct i2c_driver thermostat_driver = {
|
|
.driver = {
|
|
.name = "therm_adt746x",
|
|
},
|
|
.attach_adapter = attach_thermostat,
|
|
.probe = probe_thermostat,
|
|
.remove = remove_thermostat,
|
|
.id_table = therm_adt746x_id,
|
|
};
|
|
|
|
/*
|
|
* Now, unfortunately, sysfs doesn't give us a nice void * we could
|
|
* pass around to the attribute functions, so we don't really have
|
|
* choice but implement a bunch of them...
|
|
*
|
|
* FIXME, it does now...
|
|
*/
|
|
#define BUILD_SHOW_FUNC_INT(name, data) \
|
|
static ssize_t show_##name(struct device *dev, struct device_attribute *attr, char *buf) \
|
|
{ \
|
|
return sprintf(buf, "%d\n", data); \
|
|
}
|
|
|
|
#define BUILD_SHOW_FUNC_STR(name, data) \
|
|
static ssize_t show_##name(struct device *dev, struct device_attribute *attr, char *buf) \
|
|
{ \
|
|
return sprintf(buf, "%s\n", data); \
|
|
}
|
|
|
|
#define BUILD_SHOW_FUNC_FAN(name, data) \
|
|
static ssize_t show_##name(struct device *dev, struct device_attribute *attr, char *buf) \
|
|
{ \
|
|
return sprintf(buf, "%d (%d rpm)\n", \
|
|
thermostat->last_speed[data], \
|
|
read_fan_speed(thermostat, FAN_SPEED[data]) \
|
|
); \
|
|
}
|
|
|
|
#define BUILD_STORE_FUNC_DEG(name, data) \
|
|
static ssize_t store_##name(struct device *dev, struct device_attribute *attr, const char *buf, size_t n) \
|
|
{ \
|
|
int val; \
|
|
int i; \
|
|
val = simple_strtol(buf, NULL, 10); \
|
|
printk(KERN_INFO "Adjusting limits by %d degrees\n", val); \
|
|
limit_adjust = val; \
|
|
for (i=0; i < 3; i++) \
|
|
set_limit(thermostat, i); \
|
|
return n; \
|
|
}
|
|
|
|
#define BUILD_STORE_FUNC_INT(name, data) \
|
|
static ssize_t store_##name(struct device *dev, struct device_attribute *attr, const char *buf, size_t n) \
|
|
{ \
|
|
int val; \
|
|
val = simple_strtol(buf, NULL, 10); \
|
|
if (val < 0 || val > 255) \
|
|
return -EINVAL; \
|
|
printk(KERN_INFO "Setting specified fan speed to %d\n", val); \
|
|
data = val; \
|
|
return n; \
|
|
}
|
|
|
|
BUILD_SHOW_FUNC_INT(sensor1_temperature, (read_reg(thermostat, TEMP_REG[1])))
|
|
BUILD_SHOW_FUNC_INT(sensor2_temperature, (read_reg(thermostat, TEMP_REG[2])))
|
|
BUILD_SHOW_FUNC_INT(sensor1_limit, thermostat->limits[1])
|
|
BUILD_SHOW_FUNC_INT(sensor2_limit, thermostat->limits[2])
|
|
BUILD_SHOW_FUNC_STR(sensor1_location, sensor_location[1])
|
|
BUILD_SHOW_FUNC_STR(sensor2_location, sensor_location[2])
|
|
|
|
BUILD_SHOW_FUNC_INT(specified_fan_speed, fan_speed)
|
|
BUILD_SHOW_FUNC_FAN(sensor1_fan_speed, 0)
|
|
BUILD_SHOW_FUNC_FAN(sensor2_fan_speed, 1)
|
|
|
|
BUILD_STORE_FUNC_INT(specified_fan_speed,fan_speed)
|
|
BUILD_SHOW_FUNC_INT(limit_adjust, limit_adjust)
|
|
BUILD_STORE_FUNC_DEG(limit_adjust, thermostat)
|
|
|
|
static DEVICE_ATTR(sensor1_temperature, S_IRUGO,
|
|
show_sensor1_temperature,NULL);
|
|
static DEVICE_ATTR(sensor2_temperature, S_IRUGO,
|
|
show_sensor2_temperature,NULL);
|
|
static DEVICE_ATTR(sensor1_limit, S_IRUGO,
|
|
show_sensor1_limit, NULL);
|
|
static DEVICE_ATTR(sensor2_limit, S_IRUGO,
|
|
show_sensor2_limit, NULL);
|
|
static DEVICE_ATTR(sensor1_location, S_IRUGO,
|
|
show_sensor1_location, NULL);
|
|
static DEVICE_ATTR(sensor2_location, S_IRUGO,
|
|
show_sensor2_location, NULL);
|
|
|
|
static DEVICE_ATTR(specified_fan_speed, S_IRUSR|S_IWUSR|S_IRGRP|S_IROTH,
|
|
show_specified_fan_speed,store_specified_fan_speed);
|
|
|
|
static DEVICE_ATTR(sensor1_fan_speed, S_IRUGO,
|
|
show_sensor1_fan_speed, NULL);
|
|
static DEVICE_ATTR(sensor2_fan_speed, S_IRUGO,
|
|
show_sensor2_fan_speed, NULL);
|
|
|
|
static DEVICE_ATTR(limit_adjust, S_IRUSR|S_IWUSR|S_IRGRP|S_IROTH,
|
|
show_limit_adjust, store_limit_adjust);
|
|
|
|
|
|
static int __init
|
|
thermostat_init(void)
|
|
{
|
|
struct device_node* np;
|
|
const u32 *prop;
|
|
int i = 0, offset = 0;
|
|
|
|
np = of_find_node_by_name(NULL, "fan");
|
|
if (!np)
|
|
return -ENODEV;
|
|
if (of_device_is_compatible(np, "adt7460"))
|
|
therm_type = ADT7460;
|
|
else if (of_device_is_compatible(np, "adt7467"))
|
|
therm_type = ADT7467;
|
|
else {
|
|
of_node_put(np);
|
|
return -ENODEV;
|
|
}
|
|
|
|
prop = of_get_property(np, "hwsensor-params-version", NULL);
|
|
printk(KERN_INFO "adt746x: version %d (%ssupported)\n", *prop,
|
|
(*prop == 1)?"":"un");
|
|
if (*prop != 1) {
|
|
of_node_put(np);
|
|
return -ENODEV;
|
|
}
|
|
|
|
prop = of_get_property(np, "reg", NULL);
|
|
if (!prop) {
|
|
of_node_put(np);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* look for bus either by path or using "reg" */
|
|
if (strstr(np->full_name, "/i2c-bus@") != NULL) {
|
|
const char *tmp_bus = (strstr(np->full_name, "/i2c-bus@") + 9);
|
|
therm_bus = tmp_bus[0]-'0';
|
|
} else {
|
|
therm_bus = ((*prop) >> 8) & 0x0f;
|
|
}
|
|
|
|
therm_address = ((*prop) & 0xff) >> 1;
|
|
|
|
printk(KERN_INFO "adt746x: Thermostat bus: %d, address: 0x%02x, "
|
|
"limit_adjust: %d, fan_speed: %d\n",
|
|
therm_bus, therm_address, limit_adjust, fan_speed);
|
|
|
|
if (of_get_property(np, "hwsensor-location", NULL)) {
|
|
for (i = 0; i < 3; i++) {
|
|
sensor_location[i] = of_get_property(np,
|
|
"hwsensor-location", NULL) + offset;
|
|
|
|
if (sensor_location[i] == NULL)
|
|
sensor_location[i] = "";
|
|
|
|
printk(KERN_INFO "sensor %d: %s\n", i, sensor_location[i]);
|
|
offset += strlen(sensor_location[i]) + 1;
|
|
}
|
|
} else {
|
|
sensor_location[0] = "?";
|
|
sensor_location[1] = "?";
|
|
sensor_location[2] = "?";
|
|
}
|
|
|
|
of_dev = of_platform_device_create(np, "temperatures", NULL);
|
|
of_node_put(np);
|
|
|
|
if (of_dev == NULL) {
|
|
printk(KERN_ERR "Can't register temperatures device !\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
#ifndef CONFIG_I2C_POWERMAC
|
|
request_module("i2c-powermac");
|
|
#endif
|
|
|
|
return i2c_add_driver(&thermostat_driver);
|
|
}
|
|
|
|
static void thermostat_create_files(void)
|
|
{
|
|
int err;
|
|
|
|
err = device_create_file(&of_dev->dev, &dev_attr_sensor1_temperature);
|
|
err |= device_create_file(&of_dev->dev, &dev_attr_sensor2_temperature);
|
|
err |= device_create_file(&of_dev->dev, &dev_attr_sensor1_limit);
|
|
err |= device_create_file(&of_dev->dev, &dev_attr_sensor2_limit);
|
|
err |= device_create_file(&of_dev->dev, &dev_attr_sensor1_location);
|
|
err |= device_create_file(&of_dev->dev, &dev_attr_sensor2_location);
|
|
err |= device_create_file(&of_dev->dev, &dev_attr_limit_adjust);
|
|
err |= device_create_file(&of_dev->dev, &dev_attr_specified_fan_speed);
|
|
err |= device_create_file(&of_dev->dev, &dev_attr_sensor1_fan_speed);
|
|
if(therm_type == ADT7460)
|
|
err |= device_create_file(&of_dev->dev, &dev_attr_sensor2_fan_speed);
|
|
if (err)
|
|
printk(KERN_WARNING
|
|
"Failed to create tempertaure attribute file(s).\n");
|
|
}
|
|
|
|
static void thermostat_remove_files(void)
|
|
{
|
|
if (of_dev) {
|
|
device_remove_file(&of_dev->dev, &dev_attr_sensor1_temperature);
|
|
device_remove_file(&of_dev->dev, &dev_attr_sensor2_temperature);
|
|
device_remove_file(&of_dev->dev, &dev_attr_sensor1_limit);
|
|
device_remove_file(&of_dev->dev, &dev_attr_sensor2_limit);
|
|
device_remove_file(&of_dev->dev, &dev_attr_sensor1_location);
|
|
device_remove_file(&of_dev->dev, &dev_attr_sensor2_location);
|
|
device_remove_file(&of_dev->dev, &dev_attr_limit_adjust);
|
|
device_remove_file(&of_dev->dev, &dev_attr_specified_fan_speed);
|
|
device_remove_file(&of_dev->dev, &dev_attr_sensor1_fan_speed);
|
|
|
|
if(therm_type == ADT7460)
|
|
device_remove_file(&of_dev->dev,
|
|
&dev_attr_sensor2_fan_speed);
|
|
|
|
}
|
|
}
|
|
|
|
static void __exit
|
|
thermostat_exit(void)
|
|
{
|
|
i2c_del_driver(&thermostat_driver);
|
|
of_device_unregister(of_dev);
|
|
}
|
|
|
|
module_init(thermostat_init);
|
|
module_exit(thermostat_exit);
|