![Eric Miao](/assets/img/avatar_default.png)
pxa-regs.h and hardware.h are not intended for use directly in driver code, remove those unnecessary references. Signed-off-by: Eric Miao <eric.miao@marvell.com>
224 lines
5.3 KiB
C
224 lines
5.3 KiB
C
/*
|
|
* linux/arch/arm/mach-pxa/cm-x2xx-pci.c
|
|
*
|
|
* PCI bios-type initialisation for PCI machines
|
|
*
|
|
* Bits taken from various places.
|
|
*
|
|
* Copyright (C) 2007, 2008 Compulab, Ltd.
|
|
* Mike Rapoport <mike@compulab.co.il>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/init.h>
|
|
#include <linux/device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/gpio.h>
|
|
|
|
#include <asm/mach/pci.h>
|
|
#include <asm/mach-types.h>
|
|
|
|
#include <asm/hardware/it8152.h>
|
|
|
|
unsigned long it8152_base_address;
|
|
static int cmx2xx_it8152_irq_gpio;
|
|
|
|
/*
|
|
* Only first 64MB of memory can be accessed via PCI.
|
|
* We use GFP_DMA to allocate safe buffers to do map/unmap.
|
|
* This is really ugly and we need a better way of specifying
|
|
* DMA-capable regions of memory.
|
|
*/
|
|
void __init cmx2xx_pci_adjust_zones(int node, unsigned long *zone_size,
|
|
unsigned long *zhole_size)
|
|
{
|
|
unsigned int sz = SZ_64M >> PAGE_SHIFT;
|
|
|
|
if (machine_is_armcore()) {
|
|
pr_info("Adjusting zones for CM-X2XX\n");
|
|
|
|
/*
|
|
* Only adjust if > 64M on current system
|
|
*/
|
|
if (node || (zone_size[0] <= sz))
|
|
return;
|
|
|
|
zone_size[1] = zone_size[0] - sz;
|
|
zone_size[0] = sz;
|
|
zhole_size[1] = zhole_size[0];
|
|
zhole_size[0] = 0;
|
|
}
|
|
}
|
|
|
|
static void cmx2xx_it8152_irq_demux(unsigned int irq, struct irq_desc *desc)
|
|
{
|
|
/* clear our parent irq */
|
|
GEDR(cmx2xx_it8152_irq_gpio) = GPIO_bit(cmx2xx_it8152_irq_gpio);
|
|
|
|
it8152_irq_demux(irq, desc);
|
|
}
|
|
|
|
void __cmx2xx_pci_init_irq(int irq_gpio)
|
|
{
|
|
it8152_init_irq();
|
|
|
|
cmx2xx_it8152_irq_gpio = irq_gpio;
|
|
|
|
set_irq_type(gpio_to_irq(irq_gpio), IRQ_TYPE_EDGE_RISING);
|
|
|
|
set_irq_chained_handler(gpio_to_irq(irq_gpio), cmx2xx_it8152_irq_demux);
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static unsigned long sleep_save_ite[10];
|
|
|
|
void __cmx2xx_pci_suspend(void)
|
|
{
|
|
/* save ITE state */
|
|
sleep_save_ite[0] = __raw_readl(IT8152_INTC_PDCNIMR);
|
|
sleep_save_ite[1] = __raw_readl(IT8152_INTC_LPCNIMR);
|
|
sleep_save_ite[2] = __raw_readl(IT8152_INTC_LPNIAR);
|
|
|
|
/* Clear ITE IRQ's */
|
|
__raw_writel((0), IT8152_INTC_PDCNIRR);
|
|
__raw_writel((0), IT8152_INTC_LPCNIRR);
|
|
}
|
|
|
|
void __cmx2xx_pci_resume(void)
|
|
{
|
|
/* restore IT8152 state */
|
|
__raw_writel((sleep_save_ite[0]), IT8152_INTC_PDCNIMR);
|
|
__raw_writel((sleep_save_ite[1]), IT8152_INTC_LPCNIMR);
|
|
__raw_writel((sleep_save_ite[2]), IT8152_INTC_LPNIAR);
|
|
}
|
|
#else
|
|
void cmx2xx_pci_suspend(void) {}
|
|
void cmx2xx_pci_resume(void) {}
|
|
#endif
|
|
|
|
/* PCI IRQ mapping*/
|
|
static int __init cmx2xx_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
|
|
{
|
|
int irq;
|
|
|
|
dev_dbg(&dev->dev, "%s: slot=%x, pin=%x\n", __func__, slot, pin);
|
|
|
|
irq = it8152_pci_map_irq(dev, slot, pin);
|
|
if (irq)
|
|
return irq;
|
|
|
|
/*
|
|
Here comes the ugly part. The routing is baseboard specific,
|
|
but defining a platform for each possible base of CM-X2XX is
|
|
unrealistic. Here we keep mapping for ATXBase and SB-X2XX.
|
|
*/
|
|
/* ATXBASE PCI slot */
|
|
if (slot == 7)
|
|
return IT8152_PCI_INTA;
|
|
|
|
/* ATXBase/SB-X2XX CardBus */
|
|
if (slot == 8 || slot == 0)
|
|
return IT8152_PCI_INTB;
|
|
|
|
/* ATXBase Ethernet */
|
|
if (slot == 9)
|
|
return IT8152_PCI_INTA;
|
|
|
|
/* CM-x255 Onboard Ethernet */
|
|
if (slot == 15)
|
|
return IT8152_PCI_INTC;
|
|
|
|
/* SB-x2xx Ethernet */
|
|
if (slot == 16)
|
|
return IT8152_PCI_INTA;
|
|
|
|
/* PC104+ interrupt routing */
|
|
if ((slot == 17) || (slot == 19))
|
|
return IT8152_PCI_INTA;
|
|
if ((slot == 18) || (slot == 20))
|
|
return IT8152_PCI_INTB;
|
|
|
|
return(0);
|
|
}
|
|
|
|
static void cmx2xx_pci_preinit(void)
|
|
{
|
|
pr_info("Initializing CM-X2XX PCI subsystem\n");
|
|
|
|
__raw_writel(0x800, IT8152_PCI_CFG_ADDR);
|
|
if (__raw_readl(IT8152_PCI_CFG_DATA) == 0x81521283) {
|
|
pr_info("PCI Bridge found.\n");
|
|
|
|
/* set PCI I/O base at 0 */
|
|
writel(0x848, IT8152_PCI_CFG_ADDR);
|
|
writel(0, IT8152_PCI_CFG_DATA);
|
|
|
|
/* set PCI memory base at 0 */
|
|
writel(0x840, IT8152_PCI_CFG_ADDR);
|
|
writel(0, IT8152_PCI_CFG_DATA);
|
|
|
|
writel(0x20, IT8152_GPIO_GPDR);
|
|
|
|
/* CardBus Controller on ATXbase baseboard */
|
|
writel(0x4000, IT8152_PCI_CFG_ADDR);
|
|
if (readl(IT8152_PCI_CFG_DATA) == 0xAC51104C) {
|
|
pr_info("CardBus Bridge found.\n");
|
|
|
|
/* Configure socket 0 */
|
|
writel(0x408C, IT8152_PCI_CFG_ADDR);
|
|
writel(0x1022, IT8152_PCI_CFG_DATA);
|
|
|
|
writel(0x4080, IT8152_PCI_CFG_ADDR);
|
|
writel(0x3844d060, IT8152_PCI_CFG_DATA);
|
|
|
|
writel(0x4090, IT8152_PCI_CFG_ADDR);
|
|
writel(((readl(IT8152_PCI_CFG_DATA) & 0xffff) |
|
|
0x60440000),
|
|
IT8152_PCI_CFG_DATA);
|
|
|
|
writel(0x4018, IT8152_PCI_CFG_ADDR);
|
|
writel(0xb0000000, IT8152_PCI_CFG_DATA);
|
|
|
|
/* Configure socket 1 */
|
|
writel(0x418C, IT8152_PCI_CFG_ADDR);
|
|
writel(0x1022, IT8152_PCI_CFG_DATA);
|
|
|
|
writel(0x4180, IT8152_PCI_CFG_ADDR);
|
|
writel(0x3844d060, IT8152_PCI_CFG_DATA);
|
|
|
|
writel(0x4190, IT8152_PCI_CFG_ADDR);
|
|
writel(((readl(IT8152_PCI_CFG_DATA) & 0xffff) |
|
|
0x60440000),
|
|
IT8152_PCI_CFG_DATA);
|
|
|
|
writel(0x4118, IT8152_PCI_CFG_ADDR);
|
|
writel(0xb0000000, IT8152_PCI_CFG_DATA);
|
|
}
|
|
}
|
|
}
|
|
|
|
static struct hw_pci cmx2xx_pci __initdata = {
|
|
.swizzle = pci_std_swizzle,
|
|
.map_irq = cmx2xx_pci_map_irq,
|
|
.nr_controllers = 1,
|
|
.setup = it8152_pci_setup,
|
|
.scan = it8152_pci_scan_bus,
|
|
.preinit = cmx2xx_pci_preinit,
|
|
};
|
|
|
|
static int __init cmx2xx_init_pci(void)
|
|
{
|
|
if (machine_is_armcore())
|
|
pci_common_init(&cmx2xx_pci);
|
|
|
|
return 0;
|
|
}
|
|
|
|
subsys_initcall(cmx2xx_init_pci);
|