![Hans Verkuil](/assets/img/avatar_default.png)
Replace the old license information with the corresponding SPDX license for those headers that I authored. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
118 lines
3.2 KiB
C
118 lines
3.2 KiB
C
/* SPDX-License-Identifier: GPL-2.0-only */
|
|
/*
|
|
* tc358743 - Toshiba HDMI to CSI-2 bridge
|
|
*
|
|
* Copyright 2015 Cisco Systems, Inc. and/or its affiliates. All rights reserved.
|
|
*/
|
|
|
|
/*
|
|
* References (c = chapter, p = page):
|
|
* REF_01 - Toshiba, TC358743XBG (H2C), Functional Specification, Rev 0.60
|
|
* REF_02 - Toshiba, TC358743XBG_HDMI-CSI_Tv11p_nm.xls
|
|
*/
|
|
|
|
#ifndef _TC358743_
|
|
#define _TC358743_
|
|
|
|
enum tc358743_ddc5v_delays {
|
|
DDC5V_DELAY_0_MS,
|
|
DDC5V_DELAY_50_MS,
|
|
DDC5V_DELAY_100_MS,
|
|
DDC5V_DELAY_200_MS,
|
|
};
|
|
|
|
enum tc358743_hdmi_detection_delay {
|
|
HDMI_MODE_DELAY_0_MS,
|
|
HDMI_MODE_DELAY_25_MS,
|
|
HDMI_MODE_DELAY_50_MS,
|
|
HDMI_MODE_DELAY_100_MS,
|
|
};
|
|
|
|
struct tc358743_platform_data {
|
|
/* System clock connected to REFCLK (pin H5) */
|
|
u32 refclk_hz; /* 26 MHz, 27 MHz or 42 MHz */
|
|
|
|
/* DDC +5V debounce delay to avoid spurious interrupts when the cable
|
|
* is connected.
|
|
* Sets DDC5V_MODE in register DDC_CTL.
|
|
* Default: DDC5V_DELAY_0_MS
|
|
*/
|
|
enum tc358743_ddc5v_delays ddc5v_delay;
|
|
|
|
bool enable_hdcp;
|
|
|
|
/*
|
|
* The FIFO size is 512x32, so Toshiba recommend to set the default FIFO
|
|
* level to somewhere in the middle (e.g. 300), so it can cover speed
|
|
* mismatches in input and output ports.
|
|
*/
|
|
u16 fifo_level;
|
|
|
|
/* Bps pr lane is (refclk_hz / pll_prd) * pll_fbd */
|
|
u16 pll_prd;
|
|
u16 pll_fbd;
|
|
|
|
/* CSI
|
|
* Calculate CSI parameters with REF_02 for the highest resolution your
|
|
* CSI interface can handle. The driver will adjust the number of CSI
|
|
* lanes in use according to the pixel clock.
|
|
*
|
|
* The values in brackets are calculated with REF_02 when the number of
|
|
* bps pr lane is 823.5 MHz, and can serve as a starting point.
|
|
*/
|
|
u32 lineinitcnt; /* (0x00001770) */
|
|
u32 lptxtimecnt; /* (0x00000005) */
|
|
u32 tclk_headercnt; /* (0x00001d04) */
|
|
u32 tclk_trailcnt; /* (0x00000000) */
|
|
u32 ths_headercnt; /* (0x00000505) */
|
|
u32 twakeup; /* (0x00004650) */
|
|
u32 tclk_postcnt; /* (0x00000000) */
|
|
u32 ths_trailcnt; /* (0x00000004) */
|
|
u32 hstxvregcnt; /* (0x00000005) */
|
|
|
|
/* DVI->HDMI detection delay to avoid unnecessary switching between DVI
|
|
* and HDMI mode.
|
|
* Sets HDMI_DET_V in register HDMI_DET.
|
|
* Default: HDMI_MODE_DELAY_0_MS
|
|
*/
|
|
enum tc358743_hdmi_detection_delay hdmi_detection_delay;
|
|
|
|
/* Reset PHY automatically when TMDS clock goes from DC to AC.
|
|
* Sets PHY_AUTO_RST2 in register PHY_CTL2.
|
|
* Default: false
|
|
*/
|
|
bool hdmi_phy_auto_reset_tmds_detected;
|
|
|
|
/* Reset PHY automatically when TMDS clock passes 21 MHz.
|
|
* Sets PHY_AUTO_RST3 in register PHY_CTL2.
|
|
* Default: false
|
|
*/
|
|
bool hdmi_phy_auto_reset_tmds_in_range;
|
|
|
|
/* Reset PHY automatically when TMDS clock is detected.
|
|
* Sets PHY_AUTO_RST4 in register PHY_CTL2.
|
|
* Default: false
|
|
*/
|
|
bool hdmi_phy_auto_reset_tmds_valid;
|
|
|
|
/* Reset HDMI PHY automatically when hsync period is out of range.
|
|
* Sets H_PI_RST in register HV_RST.
|
|
* Default: false
|
|
*/
|
|
bool hdmi_phy_auto_reset_hsync_out_of_range;
|
|
|
|
/* Reset HDMI PHY automatically when vsync period is out of range.
|
|
* Sets V_PI_RST in register HV_RST.
|
|
* Default: false
|
|
*/
|
|
bool hdmi_phy_auto_reset_vsync_out_of_range;
|
|
};
|
|
|
|
/* custom controls */
|
|
/* Audio sample rate in Hz */
|
|
#define TC358743_CID_AUDIO_SAMPLING_RATE (V4L2_CID_USER_TC358743_BASE + 0)
|
|
/* Audio present status */
|
|
#define TC358743_CID_AUDIO_PRESENT (V4L2_CID_USER_TC358743_BASE + 1)
|
|
|
|
#endif
|