redonkable
/
alistair23-linux
1
0
Fork 0
Code Releases Activity
alistair23-linux/drivers/tty/serial
History
Tony Lindgren a630fbfbb1 serial: omap: Fix device tree based PM runtime 
In the runtime_suspend function pdata is not being used, and
also blocks the function in device tree based booting. Fix it
by removing the unused pdata from the runtime_suspend function.

Further, context loss count is not being passed in pdata, so
let's just reinitialize the port every time for those case.
This can be further optimized later on for the device tree
case by adding detection for the hardware state and possibly
by adding a driver specific autosuspend timeout.

And doing this, we can then make the related dev_err into a
dev_dbg message instead of an error.

In order for the wake-up events to work, we also need to set
autosuspend_timeout to -1 if 0, and also device_init_wakeup()
as that's not being done by the platform init code for the
device tree case.

Note that this does not affect legacy booting, and in fact
might make it work for the cases where the context loss info
is not being passed in pdata.

Thanks to Kevin Hilman <khilman@linaro.org> for debugging
and suggesting fixes for the autosuspend_timeout and
device_init_wakeup() related initializiation.

Reviewed-by: Kevin Hilman <khilman@linaro.org>
Tested-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 		2013-06-17 12:49:44 -07:00
..
8250 Merge 3.10-rc5 into tty-next 2013-06-08 21:23:33 -07:00
cpm_uart serial: use platform_{get,set}_drvdata() 2013-06-03 10:21:33 -07:00
jsm TTY: jsm, remove superfluous check 2013-03-18 16:17:20 -07:00
21285.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
68328serial.c Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu 2013-05-10 07:22:35 -07:00
Kconfig tty: serial: add Freescale lpuart driver support 2013-06-08 22:30:44 -07:00
Makefile tty: serial: add Freescale lpuart driver support 2013-06-08 22:30:44 -07:00
altera_jtaguart.c tty: serial: altera_jtaguart: Simplify altera_jtaguart_init() 2013-02-05 11:13:51 -08:00
altera_uart.c serial: altera: remove unnecessary platform_set_drvdata() 2013-05-20 11:53:46 -07:00
amba-pl010.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
amba-pl011.c Merge 3.10-rc3 into tty-next 2013-05-27 10:57:53 +09:00
apbuart.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
apbuart.h
…
ar933x_uart.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
arc_uart.c TTY: cleanup tty->hw_stopped uses 2013-03-18 16:24:30 -07:00
atmel_serial.c tty: atmel_serial_probe(): index of atmel_ports[] fix 2013-03-15 13:23:29 -07:00
bcm63xx_uart.c MIPS: BCM63XX: merge bcm63xx_clk.h into bcm63xx/clk.c 2013-05-08 01:19:04 +02:00
bfin_sport_uart.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
bfin_sport_uart.h tty: bfin-sport-uart: Rx interrupt is not called always with irq disabled. 2011-12-09 19:05:33 -08:00
bfin_uart.c TTY: serial/bfin_uart, unbreak build with KGDB enabled 2013-03-18 16:24:30 -07:00
clps711x.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
crisv10.c crisv10: use counts from tty_port 2013-03-18 16:26:33 -07:00
crisv10.h crisv10: use counts from tty_port 2013-03-18 16:26:33 -07:00
dz.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
dz.h
…
efm32-uart.c serial/efm32: parse location property 2013-01-21 13:56:46 -08:00
fsl_lpuart.c tty: serial: add Freescale lpuart driver support 2013-06-08 22:30:44 -07:00
icom.c driver: tty: serial: remove cast for kzalloc return value 2013-03-18 17:09:37 -07:00
icom.h
…
ifx6x60.c tty: ifx6x60: Remove unused suspend/resume callbacks 2013-03-18 16:29:29 -07:00
ifx6x60.h serial:ifx6x60:Prevent data transfer when IFX6x60 port is shutdown 2012-11-01 08:50:01 -07:00
imx.c serial: imx: Fix serial clock unbalance 2013-06-17 12:49:43 -07:00
ioc3_serial.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
ioc4_serial.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
ip22zilog.c TTY: ip22zilog, fix tty_flip_buffer_push call 2013-01-16 07:36:47 -08:00
ip22zilog.h
…
kgdb_nmi.c kgdb: remove #include <linux/serial_8250.h> from kgdb.h 2013-02-04 15:35:26 -08:00
kgdboc.c KGDB/KDB fixes and cleanups 2012-10-13 11:16:58 +09:00
lantiq.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
lpc32xx_hs.c serial: lpc32xx: Fix fallout from tty_port conversion 2013-01-18 16:05:15 -08:00
m32r_sio.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
m32r_sio.h TTY: serial, include pci.h in m32r_sio 2012-03-08 11:47:02 -08:00
m32r_sio_reg.h m32r: relocate drivers back out of 8250 dir 2012-02-08 15:04:32 -08:00
max310x.c tty: max310x: Use dev_pm_ops 2013-03-18 16:29:29 -07:00
max3100.c serial: max3100: use spi_get_drvdata() and spi_set_drvdata() 2013-04-05 15:49:39 -07:00
mcf.c serial: mcf: missing uart_unregister_driver() on error in mcf_init() 2013-05-20 11:54:56 -07:00
mfd.c serial: mfd: Add sysrq support 2013-06-17 12:49:43 -07:00
mpc52xx_uart.c serial/mpc52xx_uart: fix kernel panic when system reboot 2013-06-17 12:49:43 -07:00
mpsc.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
mrst_max3110.c tty: mrst_max3110: Use dev_pm_ops 2013-03-18 16:29:29 -07:00
mrst_max3110.h max3110: add sysrq support 2011-08-26 11:01:15 -07:00
msm_serial.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
msm_serial.h tty: remove invalid location line in file header 2011-04-19 16:33:36 -07:00
msm_serial_hs.c TTY: serial/msm_serial_hs, remove unused tty 2013-03-18 16:24:30 -07:00
msm_smd_tty.c TTY: msm_smd_tty, clean up activate/shutdown 2013-03-18 16:19:44 -07:00
mux.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
mxs-auart.c ARM: arm-soc device tree changes, part 2 2013-05-07 11:06:17 -07:00
netx-serial.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
nwpserial.c tty: nwpserial: Pass correct pointer to free_irq() 2013-05-20 11:54:55 -07:00
of_serial.c serial: use platform_{get,set}_drvdata() 2013-06-03 10:21:33 -07:00
omap-serial.c serial: omap: Fix device tree based PM runtime 2013-06-17 12:49:44 -07:00
pch_uart.c serial: pch_uart: add console poll support 2013-03-15 13:55:23 -07:00
pmac_zilog.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
pmac_zilog.h tty/serial/pmac_zilog: Fix suspend & resume 2011-12-16 11:10:01 +11:00
pnx8xxx_uart.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
pxa.c serial: pxa: fine-tune clk useage 2013-01-25 08:52:23 -08:00
rp2.c serial: rp2: New driver for Comtrol RocketPort 2 cards 2013-01-17 17:28:39 -08:00
sa1100.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
samsung.c Merge 3.10-rc5 into tty-next 2013-06-08 21:23:33 -07:00
samsung.h tty: serial/samsung: fix modular build 2013-04-11 13:14:37 -07:00
sb1250-duart.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
sc26xx.c serial: use platform_{get,set}_drvdata() 2013-06-03 10:21:33 -07:00
sccnxp.c serial: sccnxp: Replace pdata.init/exit with regulator API 2013-04-15 11:04:07 -07:00
serial-tegra.c serial: tegra: Convert to devm_ioremap_resource() 2013-03-15 13:55:22 -07:00
serial_core.c serial: Move "uart_console" def to core header file. 2013-05-20 11:47:21 -07:00
serial_ks8695.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
serial_txx9.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
sh-sci.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
sh-sci.h serial: sh-sci: remove obsolete Kconfig macros 2013-03-25 14:06:45 -07:00
sirfsoc_uart.c tty/serial/sirf: fix error propagation in sirfsoc_uart_probe() 2013-06-06 13:07:05 -07:00
sirfsoc_uart.h serial: sirf: only use lookup table to set baudrate when ioclk=150MHz 2013-01-17 17:18:55 -08:00
sn_console.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
suncore.c tty: sparc: rename drivers/tty/serial/suncore.h -> include/linux/sunserialcore.h 2012-02-10 10:44:35 -08:00
sunhv.c serial: use platform_{get,set}_drvdata() 2013-06-03 10:21:33 -07:00
sunsab.c serial: use platform_{get,set}_drvdata() 2013-06-03 10:21:33 -07:00
sunsab.h
…
sunsu.c serial: use platform_{get,set}_drvdata() 2013-06-03 10:21:33 -07:00
sunzilog.c serial: use platform_{get,set}_drvdata() 2013-06-03 10:21:33 -07:00
sunzilog.h
…
timbuart.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
timbuart.h
…
uartlite.c tty: serial: uartlite: Support uartlite on big and little endian systems 2013-02-13 08:38:45 -08:00
ucc_uart.c driver: tty: add missing unregister in err case 2013-06-03 10:30:43 -07:00
vr41xx_siu.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
vt8500_serial.c serial: vt8500: Remove redundant use of of_match_ptr macro 2013-06-03 10:21:33 -07:00
xilinx_uartps.c serial: use platform_{get,set}_drvdata() 2013-06-03 10:21:33 -07:00
zs.c TTY: switch tty_flip_buffer_push 2013-01-15 22:30:15 -08:00
zs.h
…