alistair23-linux/drivers/rtc/rtc-sysfs.c
David Fries 4c24e29e65 rtc_sysfs_show_hctosys(): display 0 if resume failed
Without this patch /sys/class/rtc/$CONFIG_RTC_HCTOSYS_DEVICE/hctosys
contains a 1 (meaning "This rtc was used to initialize the system
clock") even if setting the time by do_settimeofday() at bootup failed.
The RTC can also be used to set the clock on resume, if it did 1,
otherwise 0.  Previously there was no indication if the RTC was used
to set the clock in resume.

This uses only CONFIG_RTC_HCTOSYS_DEVICE for conditional compilation
instead of it and CONFIG_RTC_HCTOSYS to be more consistent.
rtc_hctosys_ret was moved to class.c so class.c no longer depends on
hctosys.c.

[sfr@canb.auug.org.au: fix build]
Signed-off-by: David Fries <David@Fries.net>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-06 03:05:04 +09:00

256 lines
6.2 KiB
C

/*
* RTC subsystem, sysfs interface
*
* Copyright (C) 2005 Tower Technologies
* Author: Alessandro Zummo <a.zummo@towertech.it>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/rtc.h>
#include "rtc-core.h"
/* device attributes */
/*
* NOTE: RTC times displayed in sysfs use the RTC's timezone. That's
* ideally UTC. However, PCs that also boot to MS-Windows normally use
* the local time and change to match daylight savings time. That affects
* attributes including date, time, since_epoch, and wakealarm.
*/
static ssize_t
rtc_sysfs_show_name(struct device *dev, struct device_attribute *attr,
char *buf)
{
return sprintf(buf, "%s\n", to_rtc_device(dev)->name);
}
static ssize_t
rtc_sysfs_show_date(struct device *dev, struct device_attribute *attr,
char *buf)
{
ssize_t retval;
struct rtc_time tm;
retval = rtc_read_time(to_rtc_device(dev), &tm);
if (retval == 0) {
retval = sprintf(buf, "%04d-%02d-%02d\n",
tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday);
}
return retval;
}
static ssize_t
rtc_sysfs_show_time(struct device *dev, struct device_attribute *attr,
char *buf)
{
ssize_t retval;
struct rtc_time tm;
retval = rtc_read_time(to_rtc_device(dev), &tm);
if (retval == 0) {
retval = sprintf(buf, "%02d:%02d:%02d\n",
tm.tm_hour, tm.tm_min, tm.tm_sec);
}
return retval;
}
static ssize_t
rtc_sysfs_show_since_epoch(struct device *dev, struct device_attribute *attr,
char *buf)
{
ssize_t retval;
struct rtc_time tm;
retval = rtc_read_time(to_rtc_device(dev), &tm);
if (retval == 0) {
unsigned long time;
rtc_tm_to_time(&tm, &time);
retval = sprintf(buf, "%lu\n", time);
}
return retval;
}
static ssize_t
rtc_sysfs_show_max_user_freq(struct device *dev, struct device_attribute *attr,
char *buf)
{
return sprintf(buf, "%d\n", to_rtc_device(dev)->max_user_freq);
}
static ssize_t
rtc_sysfs_set_max_user_freq(struct device *dev, struct device_attribute *attr,
const char *buf, size_t n)
{
struct rtc_device *rtc = to_rtc_device(dev);
unsigned long val = simple_strtoul(buf, NULL, 0);
if (val >= 4096 || val == 0)
return -EINVAL;
rtc->max_user_freq = (int)val;
return n;
}
/**
* rtc_sysfs_show_hctosys - indicate if the given RTC set the system time
*
* Returns 1 if the system clock was set by this RTC at the last
* boot or resume event.
*/
static ssize_t
rtc_sysfs_show_hctosys(struct device *dev, struct device_attribute *attr,
char *buf)
{
#ifdef CONFIG_RTC_HCTOSYS_DEVICE
if (rtc_hctosys_ret == 0 &&
strcmp(dev_name(&to_rtc_device(dev)->dev),
CONFIG_RTC_HCTOSYS_DEVICE) == 0)
return sprintf(buf, "1\n");
else
#endif
return sprintf(buf, "0\n");
}
static struct device_attribute rtc_attrs[] = {
__ATTR(name, S_IRUGO, rtc_sysfs_show_name, NULL),
__ATTR(date, S_IRUGO, rtc_sysfs_show_date, NULL),
__ATTR(time, S_IRUGO, rtc_sysfs_show_time, NULL),
__ATTR(since_epoch, S_IRUGO, rtc_sysfs_show_since_epoch, NULL),
__ATTR(max_user_freq, S_IRUGO | S_IWUSR, rtc_sysfs_show_max_user_freq,
rtc_sysfs_set_max_user_freq),
__ATTR(hctosys, S_IRUGO, rtc_sysfs_show_hctosys, NULL),
{ },
};
static ssize_t
rtc_sysfs_show_wakealarm(struct device *dev, struct device_attribute *attr,
char *buf)
{
ssize_t retval;
unsigned long alarm;
struct rtc_wkalrm alm;
/* Don't show disabled alarms. For uniformity, RTC alarms are
* conceptually one-shot, even though some common RTCs (on PCs)
* don't actually work that way.
*
* NOTE: RTC implementations where the alarm doesn't match an
* exact YYYY-MM-DD HH:MM[:SS] date *must* disable their RTC
* alarms after they trigger, to ensure one-shot semantics.
*/
retval = rtc_read_alarm(to_rtc_device(dev), &alm);
if (retval == 0 && alm.enabled) {
rtc_tm_to_time(&alm.time, &alarm);
retval = sprintf(buf, "%lu\n", alarm);
}
return retval;
}
static ssize_t
rtc_sysfs_set_wakealarm(struct device *dev, struct device_attribute *attr,
const char *buf, size_t n)
{
ssize_t retval;
unsigned long now, alarm;
struct rtc_wkalrm alm;
struct rtc_device *rtc = to_rtc_device(dev);
char *buf_ptr;
int adjust = 0;
/* Only request alarms that trigger in the future. Disable them
* by writing another time, e.g. 0 meaning Jan 1 1970 UTC.
*/
retval = rtc_read_time(rtc, &alm.time);
if (retval < 0)
return retval;
rtc_tm_to_time(&alm.time, &now);
buf_ptr = (char *)buf;
if (*buf_ptr == '+') {
buf_ptr++;
adjust = 1;
}
alarm = simple_strtoul(buf_ptr, NULL, 0);
if (adjust) {
alarm += now;
}
if (alarm > now) {
/* Avoid accidentally clobbering active alarms; we can't
* entirely prevent that here, without even the minimal
* locking from the /dev/rtcN api.
*/
retval = rtc_read_alarm(rtc, &alm);
if (retval < 0)
return retval;
if (alm.enabled)
return -EBUSY;
alm.enabled = 1;
} else {
alm.enabled = 0;
/* Provide a valid future alarm time. Linux isn't EFI,
* this time won't be ignored when disabling the alarm.
*/
alarm = now + 300;
}
rtc_time_to_tm(alarm, &alm.time);
retval = rtc_set_alarm(rtc, &alm);
return (retval < 0) ? retval : n;
}
static DEVICE_ATTR(wakealarm, S_IRUGO | S_IWUSR,
rtc_sysfs_show_wakealarm, rtc_sysfs_set_wakealarm);
/* The reason to trigger an alarm with no process watching it (via sysfs)
* is its side effect: waking from a system state like suspend-to-RAM or
* suspend-to-disk. So: no attribute unless that side effect is possible.
* (Userspace may disable that mechanism later.)
*/
static inline int rtc_does_wakealarm(struct rtc_device *rtc)
{
if (!device_can_wakeup(rtc->dev.parent))
return 0;
return rtc->ops->set_alarm != NULL;
}
void rtc_sysfs_add_device(struct rtc_device *rtc)
{
int err;
/* not all RTCs support both alarms and wakeup */
if (!rtc_does_wakealarm(rtc))
return;
err = device_create_file(&rtc->dev, &dev_attr_wakealarm);
if (err)
dev_err(rtc->dev.parent,
"failed to create alarm attribute, %d\n", err);
}
void rtc_sysfs_del_device(struct rtc_device *rtc)
{
/* REVISIT did we add it successfully? */
if (rtc_does_wakealarm(rtc))
device_remove_file(&rtc->dev, &dev_attr_wakealarm);
}
void __init rtc_sysfs_init(struct class *rtc_class)
{
rtc_class->dev_attrs = rtc_attrs;
}