![Shaohua Li](/assets/img/avatar_default.png)
ACPI spec (ver 3.0a, p289) requires IDE power on/off executes ACPI _PSx methods. As recently most PATA drivers use libata, this patch adds _PSx method support in libata. ACPI spec doesn't mention if SATA requires the same _PSx method. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Acked-by: Len Brown <len.brown@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
901 lines
22 KiB
C
901 lines
22 KiB
C
/*
|
|
* libata-acpi.c
|
|
* Provides ACPI support for PATA/SATA.
|
|
*
|
|
* Copyright (C) 2006 Intel Corp.
|
|
* Copyright (C) 2006 Randy Dunlap
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/ata.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/device.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/acpi.h>
|
|
#include <linux/libata.h>
|
|
#include <linux/pci.h>
|
|
#include <scsi/scsi_device.h>
|
|
#include "libata.h"
|
|
|
|
#include <acpi/acpi_bus.h>
|
|
#include <acpi/acnames.h>
|
|
#include <acpi/acnamesp.h>
|
|
#include <acpi/acparser.h>
|
|
#include <acpi/acexcep.h>
|
|
#include <acpi/acmacros.h>
|
|
#include <acpi/actypes.h>
|
|
|
|
enum {
|
|
ATA_ACPI_FILTER_SETXFER = 1 << 0,
|
|
ATA_ACPI_FILTER_LOCK = 1 << 1,
|
|
|
|
ATA_ACPI_FILTER_DEFAULT = ATA_ACPI_FILTER_SETXFER |
|
|
ATA_ACPI_FILTER_LOCK,
|
|
};
|
|
|
|
static unsigned int ata_acpi_gtf_filter = ATA_ACPI_FILTER_DEFAULT;
|
|
module_param_named(acpi_gtf_filter, ata_acpi_gtf_filter, int, 0644);
|
|
MODULE_PARM_DESC(acpi_gtf_filter, "filter mask for ACPI _GTF commands, set to filter out (0x1=set xfermode, 0x2=lock/freeze lock)");
|
|
|
|
#define NO_PORT_MULT 0xffff
|
|
#define SATA_ADR(root, pmp) (((root) << 16) | (pmp))
|
|
|
|
#define REGS_PER_GTF 7
|
|
struct ata_acpi_gtf {
|
|
u8 tf[REGS_PER_GTF]; /* regs. 0x1f1 - 0x1f7 */
|
|
} __packed;
|
|
|
|
/*
|
|
* Helper - belongs in the PCI layer somewhere eventually
|
|
*/
|
|
static int is_pci_dev(struct device *dev)
|
|
{
|
|
return (dev->bus == &pci_bus_type);
|
|
}
|
|
|
|
static void ata_acpi_clear_gtf(struct ata_device *dev)
|
|
{
|
|
kfree(dev->gtf_cache);
|
|
dev->gtf_cache = NULL;
|
|
}
|
|
|
|
/**
|
|
* ata_acpi_associate_sata_port - associate SATA port with ACPI objects
|
|
* @ap: target SATA port
|
|
*
|
|
* Look up ACPI objects associated with @ap and initialize acpi_handle
|
|
* fields of @ap, the port and devices accordingly.
|
|
*
|
|
* LOCKING:
|
|
* EH context.
|
|
*
|
|
* RETURNS:
|
|
* 0 on success, -errno on failure.
|
|
*/
|
|
void ata_acpi_associate_sata_port(struct ata_port *ap)
|
|
{
|
|
WARN_ON(!(ap->flags & ATA_FLAG_ACPI_SATA));
|
|
|
|
if (!ap->nr_pmp_links) {
|
|
acpi_integer adr = SATA_ADR(ap->port_no, NO_PORT_MULT);
|
|
|
|
ap->link.device->acpi_handle =
|
|
acpi_get_child(ap->host->acpi_handle, adr);
|
|
} else {
|
|
struct ata_link *link;
|
|
|
|
ap->link.device->acpi_handle = NULL;
|
|
|
|
ata_port_for_each_link(link, ap) {
|
|
acpi_integer adr = SATA_ADR(ap->port_no, link->pmp);
|
|
|
|
link->device->acpi_handle =
|
|
acpi_get_child(ap->host->acpi_handle, adr);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void ata_acpi_associate_ide_port(struct ata_port *ap)
|
|
{
|
|
int max_devices, i;
|
|
|
|
ap->acpi_handle = acpi_get_child(ap->host->acpi_handle, ap->port_no);
|
|
if (!ap->acpi_handle)
|
|
return;
|
|
|
|
max_devices = 1;
|
|
if (ap->flags & ATA_FLAG_SLAVE_POSS)
|
|
max_devices++;
|
|
|
|
for (i = 0; i < max_devices; i++) {
|
|
struct ata_device *dev = &ap->link.device[i];
|
|
|
|
dev->acpi_handle = acpi_get_child(ap->acpi_handle, i);
|
|
}
|
|
|
|
if (ata_acpi_gtm(ap, &ap->__acpi_init_gtm) == 0)
|
|
ap->pflags |= ATA_PFLAG_INIT_GTM_VALID;
|
|
}
|
|
|
|
static void ata_acpi_handle_hotplug(struct ata_port *ap, struct kobject *kobj,
|
|
u32 event)
|
|
{
|
|
char event_string[12];
|
|
char *envp[] = { event_string, NULL };
|
|
struct ata_eh_info *ehi = &ap->link.eh_info;
|
|
|
|
if (event == 0 || event == 1) {
|
|
unsigned long flags;
|
|
spin_lock_irqsave(ap->lock, flags);
|
|
ata_ehi_clear_desc(ehi);
|
|
ata_ehi_push_desc(ehi, "ACPI event");
|
|
ata_ehi_hotplugged(ehi);
|
|
ata_port_freeze(ap);
|
|
spin_unlock_irqrestore(ap->lock, flags);
|
|
}
|
|
|
|
if (kobj) {
|
|
sprintf(event_string, "BAY_EVENT=%d", event);
|
|
kobject_uevent_env(kobj, KOBJ_CHANGE, envp);
|
|
}
|
|
}
|
|
|
|
static void ata_acpi_dev_notify(acpi_handle handle, u32 event, void *data)
|
|
{
|
|
struct ata_device *dev = data;
|
|
struct kobject *kobj = NULL;
|
|
|
|
if (dev->sdev)
|
|
kobj = &dev->sdev->sdev_gendev.kobj;
|
|
|
|
ata_acpi_handle_hotplug(dev->link->ap, kobj, event);
|
|
}
|
|
|
|
static void ata_acpi_ap_notify(acpi_handle handle, u32 event, void *data)
|
|
{
|
|
struct ata_port *ap = data;
|
|
|
|
ata_acpi_handle_hotplug(ap, &ap->dev->kobj, event);
|
|
}
|
|
|
|
/**
|
|
* ata_acpi_associate - associate ATA host with ACPI objects
|
|
* @host: target ATA host
|
|
*
|
|
* Look up ACPI objects associated with @host and initialize
|
|
* acpi_handle fields of @host, its ports and devices accordingly.
|
|
*
|
|
* LOCKING:
|
|
* EH context.
|
|
*
|
|
* RETURNS:
|
|
* 0 on success, -errno on failure.
|
|
*/
|
|
void ata_acpi_associate(struct ata_host *host)
|
|
{
|
|
int i, j;
|
|
|
|
if (!is_pci_dev(host->dev) || libata_noacpi)
|
|
return;
|
|
|
|
host->acpi_handle = DEVICE_ACPI_HANDLE(host->dev);
|
|
if (!host->acpi_handle)
|
|
return;
|
|
|
|
for (i = 0; i < host->n_ports; i++) {
|
|
struct ata_port *ap = host->ports[i];
|
|
|
|
if (host->ports[0]->flags & ATA_FLAG_ACPI_SATA)
|
|
ata_acpi_associate_sata_port(ap);
|
|
else
|
|
ata_acpi_associate_ide_port(ap);
|
|
|
|
if (ap->acpi_handle)
|
|
acpi_install_notify_handler (ap->acpi_handle,
|
|
ACPI_SYSTEM_NOTIFY,
|
|
ata_acpi_ap_notify,
|
|
ap);
|
|
|
|
for (j = 0; j < ata_link_max_devices(&ap->link); j++) {
|
|
struct ata_device *dev = &ap->link.device[j];
|
|
|
|
if (dev->acpi_handle)
|
|
acpi_install_notify_handler (dev->acpi_handle,
|
|
ACPI_SYSTEM_NOTIFY,
|
|
ata_acpi_dev_notify,
|
|
dev);
|
|
}
|
|
}
|
|
}
|
|
|
|
/**
|
|
* ata_acpi_dissociate - dissociate ATA host from ACPI objects
|
|
* @host: target ATA host
|
|
*
|
|
* This function is called during driver detach after the whole host
|
|
* is shut down.
|
|
*
|
|
* LOCKING:
|
|
* EH context.
|
|
*/
|
|
void ata_acpi_dissociate(struct ata_host *host)
|
|
{
|
|
int i;
|
|
|
|
/* Restore initial _GTM values so that driver which attaches
|
|
* afterward can use them too.
|
|
*/
|
|
for (i = 0; i < host->n_ports; i++) {
|
|
struct ata_port *ap = host->ports[i];
|
|
const struct ata_acpi_gtm *gtm = ata_acpi_init_gtm(ap);
|
|
|
|
if (ap->acpi_handle && gtm)
|
|
ata_acpi_stm(ap, gtm);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* ata_acpi_gtm - execute _GTM
|
|
* @ap: target ATA port
|
|
* @gtm: out parameter for _GTM result
|
|
*
|
|
* Evaluate _GTM and store the result in @gtm.
|
|
*
|
|
* LOCKING:
|
|
* EH context.
|
|
*
|
|
* RETURNS:
|
|
* 0 on success, -ENOENT if _GTM doesn't exist, -errno on failure.
|
|
*/
|
|
int ata_acpi_gtm(struct ata_port *ap, struct ata_acpi_gtm *gtm)
|
|
{
|
|
struct acpi_buffer output = { .length = ACPI_ALLOCATE_BUFFER };
|
|
union acpi_object *out_obj;
|
|
acpi_status status;
|
|
int rc = 0;
|
|
|
|
status = acpi_evaluate_object(ap->acpi_handle, "_GTM", NULL, &output);
|
|
|
|
rc = -ENOENT;
|
|
if (status == AE_NOT_FOUND)
|
|
goto out_free;
|
|
|
|
rc = -EINVAL;
|
|
if (ACPI_FAILURE(status)) {
|
|
ata_port_printk(ap, KERN_ERR,
|
|
"ACPI get timing mode failed (AE 0x%x)\n",
|
|
status);
|
|
goto out_free;
|
|
}
|
|
|
|
out_obj = output.pointer;
|
|
if (out_obj->type != ACPI_TYPE_BUFFER) {
|
|
ata_port_printk(ap, KERN_WARNING,
|
|
"_GTM returned unexpected object type 0x%x\n",
|
|
out_obj->type);
|
|
|
|
goto out_free;
|
|
}
|
|
|
|
if (out_obj->buffer.length != sizeof(struct ata_acpi_gtm)) {
|
|
ata_port_printk(ap, KERN_ERR,
|
|
"_GTM returned invalid length %d\n",
|
|
out_obj->buffer.length);
|
|
goto out_free;
|
|
}
|
|
|
|
memcpy(gtm, out_obj->buffer.pointer, sizeof(struct ata_acpi_gtm));
|
|
rc = 0;
|
|
out_free:
|
|
kfree(output.pointer);
|
|
return rc;
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(ata_acpi_gtm);
|
|
|
|
/**
|
|
* ata_acpi_stm - execute _STM
|
|
* @ap: target ATA port
|
|
* @stm: timing parameter to _STM
|
|
*
|
|
* Evaluate _STM with timing parameter @stm.
|
|
*
|
|
* LOCKING:
|
|
* EH context.
|
|
*
|
|
* RETURNS:
|
|
* 0 on success, -ENOENT if _STM doesn't exist, -errno on failure.
|
|
*/
|
|
int ata_acpi_stm(struct ata_port *ap, const struct ata_acpi_gtm *stm)
|
|
{
|
|
acpi_status status;
|
|
struct ata_acpi_gtm stm_buf = *stm;
|
|
struct acpi_object_list input;
|
|
union acpi_object in_params[3];
|
|
|
|
in_params[0].type = ACPI_TYPE_BUFFER;
|
|
in_params[0].buffer.length = sizeof(struct ata_acpi_gtm);
|
|
in_params[0].buffer.pointer = (u8 *)&stm_buf;
|
|
/* Buffers for id may need byteswapping ? */
|
|
in_params[1].type = ACPI_TYPE_BUFFER;
|
|
in_params[1].buffer.length = 512;
|
|
in_params[1].buffer.pointer = (u8 *)ap->link.device[0].id;
|
|
in_params[2].type = ACPI_TYPE_BUFFER;
|
|
in_params[2].buffer.length = 512;
|
|
in_params[2].buffer.pointer = (u8 *)ap->link.device[1].id;
|
|
|
|
input.count = 3;
|
|
input.pointer = in_params;
|
|
|
|
status = acpi_evaluate_object(ap->acpi_handle, "_STM", &input, NULL);
|
|
|
|
if (status == AE_NOT_FOUND)
|
|
return -ENOENT;
|
|
if (ACPI_FAILURE(status)) {
|
|
ata_port_printk(ap, KERN_ERR,
|
|
"ACPI set timing mode failed (status=0x%x)\n", status);
|
|
return -EINVAL;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(ata_acpi_stm);
|
|
|
|
/**
|
|
* ata_dev_get_GTF - get the drive bootup default taskfile settings
|
|
* @dev: target ATA device
|
|
* @gtf: output parameter for buffer containing _GTF taskfile arrays
|
|
*
|
|
* This applies to both PATA and SATA drives.
|
|
*
|
|
* The _GTF method has no input parameters.
|
|
* It returns a variable number of register set values (registers
|
|
* hex 1F1..1F7, taskfiles).
|
|
* The <variable number> is not known in advance, so have ACPI-CA
|
|
* allocate the buffer as needed and return it, then free it later.
|
|
*
|
|
* LOCKING:
|
|
* EH context.
|
|
*
|
|
* RETURNS:
|
|
* Number of taskfiles on success, 0 if _GTF doesn't exist. -EINVAL
|
|
* if _GTF is invalid.
|
|
*/
|
|
static int ata_dev_get_GTF(struct ata_device *dev, struct ata_acpi_gtf **gtf)
|
|
{
|
|
struct ata_port *ap = dev->link->ap;
|
|
acpi_status status;
|
|
struct acpi_buffer output;
|
|
union acpi_object *out_obj;
|
|
int rc = 0;
|
|
|
|
/* if _GTF is cached, use the cached value */
|
|
if (dev->gtf_cache) {
|
|
out_obj = dev->gtf_cache;
|
|
goto done;
|
|
}
|
|
|
|
/* set up output buffer */
|
|
output.length = ACPI_ALLOCATE_BUFFER;
|
|
output.pointer = NULL; /* ACPI-CA sets this; save/free it later */
|
|
|
|
if (ata_msg_probe(ap))
|
|
ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER: port#: %d\n",
|
|
__FUNCTION__, ap->port_no);
|
|
|
|
/* _GTF has no input parameters */
|
|
status = acpi_evaluate_object(dev->acpi_handle, "_GTF", NULL, &output);
|
|
out_obj = dev->gtf_cache = output.pointer;
|
|
|
|
if (ACPI_FAILURE(status)) {
|
|
if (status != AE_NOT_FOUND) {
|
|
ata_dev_printk(dev, KERN_WARNING,
|
|
"_GTF evaluation failed (AE 0x%x)\n",
|
|
status);
|
|
rc = -EINVAL;
|
|
}
|
|
goto out_free;
|
|
}
|
|
|
|
if (!output.length || !output.pointer) {
|
|
if (ata_msg_probe(ap))
|
|
ata_dev_printk(dev, KERN_DEBUG, "%s: Run _GTF: "
|
|
"length or ptr is NULL (0x%llx, 0x%p)\n",
|
|
__FUNCTION__,
|
|
(unsigned long long)output.length,
|
|
output.pointer);
|
|
rc = -EINVAL;
|
|
goto out_free;
|
|
}
|
|
|
|
if (out_obj->type != ACPI_TYPE_BUFFER) {
|
|
ata_dev_printk(dev, KERN_WARNING,
|
|
"_GTF unexpected object type 0x%x\n",
|
|
out_obj->type);
|
|
rc = -EINVAL;
|
|
goto out_free;
|
|
}
|
|
|
|
if (out_obj->buffer.length % REGS_PER_GTF) {
|
|
ata_dev_printk(dev, KERN_WARNING,
|
|
"unexpected _GTF length (%d)\n",
|
|
out_obj->buffer.length);
|
|
rc = -EINVAL;
|
|
goto out_free;
|
|
}
|
|
|
|
done:
|
|
rc = out_obj->buffer.length / REGS_PER_GTF;
|
|
if (gtf) {
|
|
*gtf = (void *)out_obj->buffer.pointer;
|
|
if (ata_msg_probe(ap))
|
|
ata_dev_printk(dev, KERN_DEBUG,
|
|
"%s: returning gtf=%p, gtf_count=%d\n",
|
|
__FUNCTION__, *gtf, rc);
|
|
}
|
|
return rc;
|
|
|
|
out_free:
|
|
ata_acpi_clear_gtf(dev);
|
|
return rc;
|
|
}
|
|
|
|
/**
|
|
* ata_acpi_cbl_80wire - Check for 80 wire cable
|
|
* @ap: Port to check
|
|
*
|
|
* Return 1 if the ACPI mode data for this port indicates the BIOS selected
|
|
* an 80wire mode.
|
|
*/
|
|
|
|
int ata_acpi_cbl_80wire(struct ata_port *ap)
|
|
{
|
|
const struct ata_acpi_gtm *gtm = ata_acpi_init_gtm(ap);
|
|
int valid = 0;
|
|
|
|
if (!gtm)
|
|
return 0;
|
|
|
|
/* Split timing, DMA enabled */
|
|
if ((gtm->flags & 0x11) == 0x11 && gtm->drive[0].dma < 55)
|
|
valid |= 1;
|
|
if ((gtm->flags & 0x14) == 0x14 && gtm->drive[1].dma < 55)
|
|
valid |= 2;
|
|
/* Shared timing, DMA enabled */
|
|
if ((gtm->flags & 0x11) == 0x01 && gtm->drive[0].dma < 55)
|
|
valid |= 1;
|
|
if ((gtm->flags & 0x14) == 0x04 && gtm->drive[0].dma < 55)
|
|
valid |= 2;
|
|
|
|
/* Drive check */
|
|
if ((valid & 1) && ata_dev_enabled(&ap->link.device[0]))
|
|
return 1;
|
|
if ((valid & 2) && ata_dev_enabled(&ap->link.device[1]))
|
|
return 1;
|
|
return 0;
|
|
}
|
|
|
|
EXPORT_SYMBOL_GPL(ata_acpi_cbl_80wire);
|
|
|
|
static void ata_acpi_gtf_to_tf(struct ata_device *dev,
|
|
const struct ata_acpi_gtf *gtf,
|
|
struct ata_taskfile *tf)
|
|
{
|
|
ata_tf_init(dev, tf);
|
|
|
|
tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
|
|
tf->protocol = ATA_PROT_NODATA;
|
|
tf->feature = gtf->tf[0]; /* 0x1f1 */
|
|
tf->nsect = gtf->tf[1]; /* 0x1f2 */
|
|
tf->lbal = gtf->tf[2]; /* 0x1f3 */
|
|
tf->lbam = gtf->tf[3]; /* 0x1f4 */
|
|
tf->lbah = gtf->tf[4]; /* 0x1f5 */
|
|
tf->device = gtf->tf[5]; /* 0x1f6 */
|
|
tf->command = gtf->tf[6]; /* 0x1f7 */
|
|
}
|
|
|
|
static int ata_acpi_filter_tf(const struct ata_taskfile *tf,
|
|
const struct ata_taskfile *ptf)
|
|
{
|
|
if (ata_acpi_gtf_filter & ATA_ACPI_FILTER_SETXFER) {
|
|
/* libata doesn't use ACPI to configure transfer mode.
|
|
* It will only confuse device configuration. Skip.
|
|
*/
|
|
if (tf->command == ATA_CMD_SET_FEATURES &&
|
|
tf->feature == SETFEATURES_XFER)
|
|
return 1;
|
|
}
|
|
|
|
if (ata_acpi_gtf_filter & ATA_ACPI_FILTER_LOCK) {
|
|
/* BIOS writers, sorry but we don't wanna lock
|
|
* features unless the user explicitly said so.
|
|
*/
|
|
|
|
/* DEVICE CONFIGURATION FREEZE LOCK */
|
|
if (tf->command == ATA_CMD_CONF_OVERLAY &&
|
|
tf->feature == ATA_DCO_FREEZE_LOCK)
|
|
return 1;
|
|
|
|
/* SECURITY FREEZE LOCK */
|
|
if (tf->command == ATA_CMD_SEC_FREEZE_LOCK)
|
|
return 1;
|
|
|
|
/* SET MAX LOCK and SET MAX FREEZE LOCK */
|
|
if ((!ptf || ptf->command != ATA_CMD_READ_NATIVE_MAX) &&
|
|
tf->command == ATA_CMD_SET_MAX &&
|
|
(tf->feature == ATA_SET_MAX_LOCK ||
|
|
tf->feature == ATA_SET_MAX_FREEZE_LOCK))
|
|
return 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ata_acpi_run_tf - send taskfile registers to host controller
|
|
* @dev: target ATA device
|
|
* @gtf: raw ATA taskfile register set (0x1f1 - 0x1f7)
|
|
*
|
|
* Outputs ATA taskfile to standard ATA host controller using MMIO
|
|
* or PIO as indicated by the ATA_FLAG_MMIO flag.
|
|
* Writes the control, feature, nsect, lbal, lbam, and lbah registers.
|
|
* Optionally (ATA_TFLAG_LBA48) writes hob_feature, hob_nsect,
|
|
* hob_lbal, hob_lbam, and hob_lbah.
|
|
*
|
|
* This function waits for idle (!BUSY and !DRQ) after writing
|
|
* registers. If the control register has a new value, this
|
|
* function also waits for idle after writing control and before
|
|
* writing the remaining registers.
|
|
*
|
|
* LOCKING:
|
|
* EH context.
|
|
*
|
|
* RETURNS:
|
|
* 1 if command is executed successfully. 0 if ignored, rejected or
|
|
* filtered out, -errno on other errors.
|
|
*/
|
|
static int ata_acpi_run_tf(struct ata_device *dev,
|
|
const struct ata_acpi_gtf *gtf,
|
|
const struct ata_acpi_gtf *prev_gtf)
|
|
{
|
|
struct ata_taskfile *pptf = NULL;
|
|
struct ata_taskfile tf, ptf, rtf;
|
|
unsigned int err_mask;
|
|
const char *level;
|
|
char msg[60];
|
|
int rc;
|
|
|
|
if ((gtf->tf[0] == 0) && (gtf->tf[1] == 0) && (gtf->tf[2] == 0)
|
|
&& (gtf->tf[3] == 0) && (gtf->tf[4] == 0) && (gtf->tf[5] == 0)
|
|
&& (gtf->tf[6] == 0))
|
|
return 0;
|
|
|
|
ata_acpi_gtf_to_tf(dev, gtf, &tf);
|
|
if (prev_gtf) {
|
|
ata_acpi_gtf_to_tf(dev, prev_gtf, &ptf);
|
|
pptf = &ptf;
|
|
}
|
|
|
|
if (!ata_acpi_filter_tf(&tf, pptf)) {
|
|
rtf = tf;
|
|
err_mask = ata_exec_internal(dev, &rtf, NULL,
|
|
DMA_NONE, NULL, 0, 0);
|
|
|
|
switch (err_mask) {
|
|
case 0:
|
|
level = KERN_DEBUG;
|
|
snprintf(msg, sizeof(msg), "succeeded");
|
|
rc = 1;
|
|
break;
|
|
|
|
case AC_ERR_DEV:
|
|
level = KERN_INFO;
|
|
snprintf(msg, sizeof(msg),
|
|
"rejected by device (Stat=0x%02x Err=0x%02x)",
|
|
rtf.command, rtf.feature);
|
|
rc = 0;
|
|
break;
|
|
|
|
default:
|
|
level = KERN_ERR;
|
|
snprintf(msg, sizeof(msg),
|
|
"failed (Emask=0x%x Stat=0x%02x Err=0x%02x)",
|
|
err_mask, rtf.command, rtf.feature);
|
|
rc = -EIO;
|
|
break;
|
|
}
|
|
} else {
|
|
level = KERN_INFO;
|
|
snprintf(msg, sizeof(msg), "filtered out");
|
|
rc = 0;
|
|
}
|
|
|
|
ata_dev_printk(dev, level,
|
|
"ACPI cmd %02x/%02x:%02x:%02x:%02x:%02x:%02x %s\n",
|
|
tf.command, tf.feature, tf.nsect, tf.lbal,
|
|
tf.lbam, tf.lbah, tf.device, msg);
|
|
|
|
return rc;
|
|
}
|
|
|
|
/**
|
|
* ata_acpi_exec_tfs - get then write drive taskfile settings
|
|
* @dev: target ATA device
|
|
* @nr_executed: out paramter for the number of executed commands
|
|
*
|
|
* Evaluate _GTF and excute returned taskfiles.
|
|
*
|
|
* LOCKING:
|
|
* EH context.
|
|
*
|
|
* RETURNS:
|
|
* Number of executed taskfiles on success, 0 if _GTF doesn't exist.
|
|
* -errno on other errors.
|
|
*/
|
|
static int ata_acpi_exec_tfs(struct ata_device *dev, int *nr_executed)
|
|
{
|
|
struct ata_acpi_gtf *gtf = NULL, *pgtf = NULL;
|
|
int gtf_count, i, rc;
|
|
|
|
/* get taskfiles */
|
|
rc = ata_dev_get_GTF(dev, >f);
|
|
if (rc < 0)
|
|
return rc;
|
|
gtf_count = rc;
|
|
|
|
/* execute them */
|
|
for (i = 0; i < gtf_count; i++, gtf++) {
|
|
rc = ata_acpi_run_tf(dev, gtf, pgtf);
|
|
if (rc < 0)
|
|
break;
|
|
if (rc) {
|
|
(*nr_executed)++;
|
|
pgtf = gtf;
|
|
}
|
|
}
|
|
|
|
ata_acpi_clear_gtf(dev);
|
|
|
|
if (rc < 0)
|
|
return rc;
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ata_acpi_push_id - send Identify data to drive
|
|
* @dev: target ATA device
|
|
*
|
|
* _SDD ACPI object: for SATA mode only
|
|
* Must be after Identify (Packet) Device -- uses its data
|
|
* ATM this function never returns a failure. It is an optional
|
|
* method and if it fails for whatever reason, we should still
|
|
* just keep going.
|
|
*
|
|
* LOCKING:
|
|
* EH context.
|
|
*
|
|
* RETURNS:
|
|
* 0 on success, -errno on failure.
|
|
*/
|
|
static int ata_acpi_push_id(struct ata_device *dev)
|
|
{
|
|
struct ata_port *ap = dev->link->ap;
|
|
int err;
|
|
acpi_status status;
|
|
struct acpi_object_list input;
|
|
union acpi_object in_params[1];
|
|
|
|
if (ata_msg_probe(ap))
|
|
ata_dev_printk(dev, KERN_DEBUG, "%s: ix = %d, port#: %d\n",
|
|
__FUNCTION__, dev->devno, ap->port_no);
|
|
|
|
/* Give the drive Identify data to the drive via the _SDD method */
|
|
/* _SDD: set up input parameters */
|
|
input.count = 1;
|
|
input.pointer = in_params;
|
|
in_params[0].type = ACPI_TYPE_BUFFER;
|
|
in_params[0].buffer.length = sizeof(dev->id[0]) * ATA_ID_WORDS;
|
|
in_params[0].buffer.pointer = (u8 *)dev->id;
|
|
/* Output buffer: _SDD has no output */
|
|
|
|
/* It's OK for _SDD to be missing too. */
|
|
swap_buf_le16(dev->id, ATA_ID_WORDS);
|
|
status = acpi_evaluate_object(dev->acpi_handle, "_SDD", &input, NULL);
|
|
swap_buf_le16(dev->id, ATA_ID_WORDS);
|
|
|
|
err = ACPI_FAILURE(status) ? -EIO : 0;
|
|
if (err < 0)
|
|
ata_dev_printk(dev, KERN_WARNING,
|
|
"ACPI _SDD failed (AE 0x%x)\n", status);
|
|
|
|
return err;
|
|
}
|
|
|
|
/**
|
|
* ata_acpi_on_suspend - ATA ACPI hook called on suspend
|
|
* @ap: target ATA port
|
|
*
|
|
* This function is called when @ap is about to be suspended. All
|
|
* devices are already put to sleep but the port_suspend() callback
|
|
* hasn't been executed yet. Error return from this function aborts
|
|
* suspend.
|
|
*
|
|
* LOCKING:
|
|
* EH context.
|
|
*
|
|
* RETURNS:
|
|
* 0 on success, -errno on failure.
|
|
*/
|
|
int ata_acpi_on_suspend(struct ata_port *ap)
|
|
{
|
|
/* nada */
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ata_acpi_on_resume - ATA ACPI hook called on resume
|
|
* @ap: target ATA port
|
|
*
|
|
* This function is called when @ap is resumed - right after port
|
|
* itself is resumed but before any EH action is taken.
|
|
*
|
|
* LOCKING:
|
|
* EH context.
|
|
*/
|
|
void ata_acpi_on_resume(struct ata_port *ap)
|
|
{
|
|
const struct ata_acpi_gtm *gtm = ata_acpi_init_gtm(ap);
|
|
struct ata_device *dev;
|
|
|
|
if (ap->acpi_handle && gtm) {
|
|
/* _GTM valid */
|
|
|
|
/* restore timing parameters */
|
|
ata_acpi_stm(ap, gtm);
|
|
|
|
/* _GTF should immediately follow _STM so that it can
|
|
* use values set by _STM. Cache _GTF result and
|
|
* schedule _GTF.
|
|
*/
|
|
ata_link_for_each_dev(dev, &ap->link) {
|
|
ata_acpi_clear_gtf(dev);
|
|
if (ata_dev_get_GTF(dev, NULL) >= 0)
|
|
dev->flags |= ATA_DFLAG_ACPI_PENDING;
|
|
}
|
|
} else {
|
|
/* SATA _GTF needs to be evaulated after _SDD and
|
|
* there's no reason to evaluate IDE _GTF early
|
|
* without _STM. Clear cache and schedule _GTF.
|
|
*/
|
|
ata_link_for_each_dev(dev, &ap->link) {
|
|
ata_acpi_clear_gtf(dev);
|
|
dev->flags |= ATA_DFLAG_ACPI_PENDING;
|
|
}
|
|
}
|
|
}
|
|
|
|
/**
|
|
* ata_acpi_set_state - set the port power state
|
|
* @ap: target ATA port
|
|
* @state: state, on/off
|
|
*
|
|
* This function executes the _PS0/_PS3 ACPI method to set the power state.
|
|
* ACPI spec requires _PS0 when IDE power on and _PS3 when power off
|
|
*/
|
|
void ata_acpi_set_state(struct ata_port *ap, pm_message_t state)
|
|
{
|
|
struct ata_device *dev;
|
|
|
|
if (!ap->acpi_handle || (ap->flags & ATA_FLAG_ACPI_SATA))
|
|
return;
|
|
|
|
/* channel first and then drives for power on and vica versa
|
|
for power off */
|
|
if (state.event == PM_EVENT_ON)
|
|
acpi_bus_set_power(ap->acpi_handle, ACPI_STATE_D0);
|
|
|
|
ata_link_for_each_dev(dev, &ap->link) {
|
|
if (dev->acpi_handle && ata_dev_enabled(dev))
|
|
acpi_bus_set_power(dev->acpi_handle,
|
|
state.event == PM_EVENT_ON ?
|
|
ACPI_STATE_D0 : ACPI_STATE_D3);
|
|
}
|
|
if (state.event != PM_EVENT_ON)
|
|
acpi_bus_set_power(ap->acpi_handle, ACPI_STATE_D3);
|
|
}
|
|
|
|
/**
|
|
* ata_acpi_on_devcfg - ATA ACPI hook called on device donfiguration
|
|
* @dev: target ATA device
|
|
*
|
|
* This function is called when @dev is about to be configured.
|
|
* IDENTIFY data might have been modified after this hook is run.
|
|
*
|
|
* LOCKING:
|
|
* EH context.
|
|
*
|
|
* RETURNS:
|
|
* Positive number if IDENTIFY data needs to be refreshed, 0 if not,
|
|
* -errno on failure.
|
|
*/
|
|
int ata_acpi_on_devcfg(struct ata_device *dev)
|
|
{
|
|
struct ata_port *ap = dev->link->ap;
|
|
struct ata_eh_context *ehc = &ap->link.eh_context;
|
|
int acpi_sata = ap->flags & ATA_FLAG_ACPI_SATA;
|
|
int nr_executed = 0;
|
|
int rc;
|
|
|
|
if (!dev->acpi_handle)
|
|
return 0;
|
|
|
|
/* do we need to do _GTF? */
|
|
if (!(dev->flags & ATA_DFLAG_ACPI_PENDING) &&
|
|
!(acpi_sata && (ehc->i.flags & ATA_EHI_DID_HARDRESET)))
|
|
return 0;
|
|
|
|
/* do _SDD if SATA */
|
|
if (acpi_sata) {
|
|
rc = ata_acpi_push_id(dev);
|
|
if (rc)
|
|
goto acpi_err;
|
|
}
|
|
|
|
/* do _GTF */
|
|
rc = ata_acpi_exec_tfs(dev, &nr_executed);
|
|
if (rc)
|
|
goto acpi_err;
|
|
|
|
dev->flags &= ~ATA_DFLAG_ACPI_PENDING;
|
|
|
|
/* refresh IDENTIFY page if any _GTF command has been executed */
|
|
if (nr_executed) {
|
|
rc = ata_dev_reread_id(dev, 0);
|
|
if (rc < 0) {
|
|
ata_dev_printk(dev, KERN_ERR, "failed to IDENTIFY "
|
|
"after ACPI commands\n");
|
|
return rc;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
|
|
acpi_err:
|
|
/* ignore evaluation failure if we can continue safely */
|
|
if (rc == -EINVAL && !nr_executed && !(ap->pflags & ATA_PFLAG_FROZEN))
|
|
return 0;
|
|
|
|
/* fail and let EH retry once more for unknown IO errors */
|
|
if (!(dev->flags & ATA_DFLAG_ACPI_FAILED)) {
|
|
dev->flags |= ATA_DFLAG_ACPI_FAILED;
|
|
return rc;
|
|
}
|
|
|
|
ata_dev_printk(dev, KERN_WARNING,
|
|
"ACPI: failed the second time, disabled\n");
|
|
dev->acpi_handle = NULL;
|
|
|
|
/* We can safely continue if no _GTF command has been executed
|
|
* and port is not frozen.
|
|
*/
|
|
if (!nr_executed && !(ap->pflags & ATA_PFLAG_FROZEN))
|
|
return 0;
|
|
|
|
return rc;
|
|
}
|
|
|
|
/**
|
|
* ata_acpi_on_disable - ATA ACPI hook called when a device is disabled
|
|
* @dev: target ATA device
|
|
*
|
|
* This function is called when @dev is about to be disabled.
|
|
*
|
|
* LOCKING:
|
|
* EH context.
|
|
*/
|
|
void ata_acpi_on_disable(struct ata_device *dev)
|
|
{
|
|
ata_acpi_clear_gtf(dev);
|
|
}
|