redonkable/alistair23-linux
redonkable/alistair23-linux
1
0
Fork 0
Code Releases Activity
alistair23-linux/arch/arm/boot/dts/am437x-gp-evm.dts
Franklin S Cooper Jr 78b02c36e4 ARM: dts: am437xx: Enable NAND dma prefetch by default 
Currently the default method of prefetch polled shows the highest
possible read and write speed when minimal non NAND background
activity is being done. But it is also very CPU intensive to reach
these high speeds (CPU load of 99% via mtd performance tests). While
DMA prefetch only uses 50% of the CPU to achieve around 23% less in
top read and write performance.

However, as the non NAND CPU load increases the read and write
performance takes a large hit when using polled prefetch. Therefore,
prefetch dma mode ends up outperforming prefetch polled in general
"system level" test. So switch to using dma prefetch by default since
it is likely what most users would prefer.

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Acked-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-08-14 11:34:24 -07:00

1021 lines
30 KiB
Plaintext
Raw Blame History

/*
* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/* AM437x GP EVM */
/dts-v1/;
#include "am4372.dtsi"
#include <dt-bindings/pinctrl/am43xx.h>
#include <dt-bindings/pwm/pwm.h>
#include <dt-bindings/gpio/gpio.h>
/ {
model = "TI AM437x GP EVM";
compatible = "ti,am437x-gp-evm","ti,am4372","ti,am43";
aliases {
display0 = &lcd0;
};
chosen {
stdout-path = &uart0;
};
evm_v3_3d: fixedregulator-v3_3d {
compatible = "regulator-fixed";
regulator-name = "evm_v3_3d";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
enable-active-high;
};
vtt_fixed: fixedregulator-vtt {
compatible = "regulator-fixed";
regulator-name = "vtt_fixed";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-boot-on;
enable-active-high;
gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
};
vmmcwl_fixed: fixedregulator-mmcwl {
compatible = "regulator-fixed";
regulator-name = "vmmcwl_fixed";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
gpio = <&gpio1 20 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
backlight {
compatible = "pwm-backlight";
pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>;
brightness-levels = <0 51 53 56 62 75 101 152 255>;
default-brightness-level = <8>;
};
matrix_keypad: matrix_keypad0 {
compatible = "gpio-matrix-keypad";
debounce-delay-ms = <5>;
col-scan-delay-us = <2>;
row-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH /* Bank3, pin21 */
&gpio4 3 GPIO_ACTIVE_HIGH /* Bank4, pin3 */
&gpio4 2 GPIO_ACTIVE_HIGH>; /* Bank4, pin2 */
col-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH /* Bank3, pin19 */
&gpio3 20 GPIO_ACTIVE_HIGH>; /* Bank3, pin20 */
linux,keymap = <0x00000201 /* P1 */
0x00010202 /* P2 */
0x01000067 /* UP */
0x0101006a /* RIGHT */
0x02000069 /* LEFT */
0x0201006c>; /* DOWN */
};
lcd0: display {
compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
label = "lcd";
panel-timing {
clock-frequency = <33000000>;
hactive = <800>;
vactive = <480>;
hfront-porch = <210>;
hback-porch = <16>;
hsync-len = <30>;
vback-porch = <10>;
vfront-porch = <22>;
vsync-len = <13>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <1>;
};
port {
lcd_in: endpoint {
remote-endpoint = <&dpi_out>;
};
};
};
/* fixed 12MHz oscillator */
refclk: oscillator {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <12000000>;
};
/* fixed 32k external oscillator clock */
clk_32k_rtc: clk_32k_rtc {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <32768>;
};
sound0: sound0 {
compatible = "simple-audio-card";
simple-audio-card,name = "AM437x-GP-EVM";
simple-audio-card,widgets =
"Headphone", "Headphone Jack",
"Line", "Line In";
simple-audio-card,routing =
"Headphone Jack", "HPLOUT",
"Headphone Jack", "HPROUT",
"LINE1L", "Line In",
"LINE1R", "Line In";
simple-audio-card,format = "dsp_b";
simple-audio-card,bitclock-master = <&sound0_master>;
simple-audio-card,frame-master = <&sound0_master>;
simple-audio-card,bitclock-inversion;
simple-audio-card,cpu {
sound-dai = <&mcasp1>;
system-clock-frequency = <12000000>;
};
sound0_master: simple-audio-card,codec {
sound-dai = <&tlv320aic3106>;
system-clock-frequency = <12000000>;
};
};
beeper: beeper {
compatible = "gpio-beeper";
pinctrl-names = "default";
pinctrl-0 = <&beeper_pins>;
gpios = <&gpio4 12 GPIO_ACTIVE_HIGH>;
};
};
&am43xx_pinmux {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&wlan_pins_default>;
pinctrl-1 = <&wlan_pins_sleep>;
i2c0_pins: i2c0_pins {
pinctrl-single,pins = <
AM4372_IOPAD(0x988, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */
AM4372_IOPAD(0x98c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */
>;
};
i2c1_pins: i2c1_pins {
pinctrl-single,pins = <
AM4372_IOPAD(0x95c, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_cs0.i2c1_scl */
AM4372_IOPAD(0x958, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_d1.i2c1_sda */
>;
};
mmc1_pins: pinmux_mmc1_pins {
pinctrl-single,pins = <
AM4372_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
>;
};
ecap0_pins: backlight_pins {
pinctrl-single,pins = <
AM4372_IOPAD(0x964, MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
>;
};
pixcir_ts_pins: pixcir_ts_pins {
pinctrl-single,pins = <
AM4372_IOPAD(0xa64, PIN_INPUT_PULLUP | MUX_MODE7) /* spi2_d0.gpio3_22 */
>;
};
cpsw_default: cpsw_default {
pinctrl-single,pins = <
/* Slave 1 */
AM4372_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_txen */
AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rxctl */
AM4372_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_txd3 */
AM4372_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_txd2 */
AM4372_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_txd1 */
AM4372_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_txd0 */
AM4372_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rmii1_tclk */
AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rmii1_rclk */
AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd3 */
AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd2 */
AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd1 */
AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd0 */
>;
};
cpsw_sleep: cpsw_sleep {
pinctrl-single,pins = <
/* Slave 1 reset value */
AM4372_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM4372_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM4372_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM4372_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM4372_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM4372_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM4372_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM4372_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM4372_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM4372_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM4372_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM4372_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
davinci_mdio_default: davinci_mdio_default {
pinctrl-single,pins = <
/* MDIO */
AM4372_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
AM4372_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
>;
};
davinci_mdio_sleep: davinci_mdio_sleep {
pinctrl-single,pins = <
/* MDIO reset value */
AM4372_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM4372_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
nand_flash_x8: nand_flash_x8 {
pinctrl-single,pins = <
AM4372_IOPAD(0x800, PIN_INPUT | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */
AM4372_IOPAD(0x804, PIN_INPUT | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */
AM4372_IOPAD(0x808, PIN_INPUT | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */
AM4372_IOPAD(0x80c, PIN_INPUT | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */
AM4372_IOPAD(0x810, PIN_INPUT | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */
AM4372_IOPAD(0x814, PIN_INPUT | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */
AM4372_IOPAD(0x818, PIN_INPUT | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */
AM4372_IOPAD(0x81c, PIN_INPUT | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */
AM4372_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */
AM4372_IOPAD(0x874, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpmc_wpn */
AM4372_IOPAD(0x87c, PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */
AM4372_IOPAD(0x890, PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */
AM4372_IOPAD(0x894, PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */
AM4372_IOPAD(0x898, PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */
AM4372_IOPAD(0x89c, PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */
>;
};
dss_pins: dss_pins {
pinctrl-single,pins = <
AM4372_IOPAD(0x820, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 8 -> DSS DATA 23 */
AM4372_IOPAD(0x824, PIN_OUTPUT_PULLUP | MUX_MODE1)
AM4372_IOPAD(0x828, PIN_OUTPUT_PULLUP | MUX_MODE1)
AM4372_IOPAD(0x82c, PIN_OUTPUT_PULLUP | MUX_MODE1)
AM4372_IOPAD(0x830, PIN_OUTPUT_PULLUP | MUX_MODE1)
AM4372_IOPAD(0x834, PIN_OUTPUT_PULLUP | MUX_MODE1)
AM4372_IOPAD(0x838, PIN_OUTPUT_PULLUP | MUX_MODE1)
AM4372_IOPAD(0x83c, PIN_OUTPUT_PULLUP | MUX_MODE1) /*gpmc ad 15 -> DSS DATA 16 */
AM4372_IOPAD(0x8a0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */
AM4372_IOPAD(0x8a4, PIN_OUTPUT_PULLUP | MUX_MODE0)
AM4372_IOPAD(0x8a8, PIN_OUTPUT_PULLUP | MUX_MODE0)
AM4372_IOPAD(0x8ac, PIN_OUTPUT_PULLUP | MUX_MODE0)
AM4372_IOPAD(0x8b0, PIN_OUTPUT_PULLUP | MUX_MODE0)
AM4372_IOPAD(0x8b4, PIN_OUTPUT_PULLUP | MUX_MODE0)
AM4372_IOPAD(0x8b8, PIN_OUTPUT_PULLUP | MUX_MODE0)
AM4372_IOPAD(0x8bc, PIN_OUTPUT_PULLUP | MUX_MODE0)
AM4372_IOPAD(0x8c0, PIN_OUTPUT_PULLUP | MUX_MODE0)
AM4372_IOPAD(0x8c4, PIN_OUTPUT_PULLUP | MUX_MODE0)
AM4372_IOPAD(0x8c8, PIN_OUTPUT_PULLUP | MUX_MODE0)
AM4372_IOPAD(0x8cc, PIN_OUTPUT_PULLUP | MUX_MODE0)
AM4372_IOPAD(0x8d0, PIN_OUTPUT_PULLUP | MUX_MODE0)
AM4372_IOPAD(0x8d4, PIN_OUTPUT_PULLUP | MUX_MODE0)
AM4372_IOPAD(0x8d8, PIN_OUTPUT_PULLUP | MUX_MODE0)
AM4372_IOPAD(0x8dc, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */
AM4372_IOPAD(0x8e0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */
AM4372_IOPAD(0x8e4, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */
AM4372_IOPAD(0x8e8, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */
AM4372_IOPAD(0x8ec, PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */
>;
};
display_mux_pins: display_mux_pins {
pinctrl-single,pins = <
/* GPIO 5_8 to select LCD / HDMI */
AM4372_IOPAD(0xa38, PIN_OUTPUT_PULLUP | MUX_MODE7)
>;
};
dcan0_default: dcan0_default_pins {
pinctrl-single,pins = <
AM4372_IOPAD(0x978, PIN_OUTPUT | MUX_MODE2) /* uart1_ctsn.d_can0_tx */
AM4372_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE2) /* uart1_rtsn.d_can0_rx */
>;
};
dcan0_sleep: dcan0_sleep_pins {
pinctrl-single,pins = <
AM4372_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_ctsn.gpio0_12 */
AM4372_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_rtsn.gpio0_13 */
>;
};
dcan1_default: dcan1_default_pins {
pinctrl-single,pins = <
AM4372_IOPAD(0x980, PIN_OUTPUT | MUX_MODE2) /* uart1_rxd.d_can1_tx */
AM4372_IOPAD(0x984, PIN_INPUT_PULLUP | MUX_MODE2) /* uart1_txd.d_can1_rx */
>;
};
dcan1_sleep: dcan1_sleep_pins {
pinctrl-single,pins = <
AM4372_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_rxd.gpio0_14 */
AM4372_IOPAD(0x984, PIN_INPUT_PULLUP | MUX_MODE7) /* uart1_txd.gpio0_15 */
>;
};
vpfe0_pins_default: vpfe0_pins_default {
pinctrl-single,pins = <
AM4372_IOPAD(0x9b0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_hd mode 0*/
AM4372_IOPAD(0x9b4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_vd mode 0*/
AM4372_IOPAD(0x9c0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_pclk mode 0*/
AM4372_IOPAD(0x9c4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data8 mode 0*/
AM4372_IOPAD(0x9c8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data9 mode 0*/
AM4372_IOPAD(0xa08, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data0 mode 0*/
AM4372_IOPAD(0xa0c, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data1 mode 0*/
AM4372_IOPAD(0xa10, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data2 mode 0*/
AM4372_IOPAD(0xa14, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data3 mode 0*/
AM4372_IOPAD(0xa18, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data4 mode 0*/
AM4372_IOPAD(0xa1c, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data5 mode 0*/
AM4372_IOPAD(0xa20, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data6 mode 0*/
AM4372_IOPAD(0xa24, PIN_INPUT_PULLUP | MUX_MODE0) /* cam0_data7 mode 0*/
>;
};
vpfe0_pins_sleep: vpfe0_pins_sleep {
pinctrl-single,pins = <
AM4372_IOPAD(0x9b0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_hd mode 0*/
AM4372_IOPAD(0x9b4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_vd mode 0*/
AM4372_IOPAD(0x9c0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_pclk mode 0*/
AM4372_IOPAD(0x9c4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data8 mode 0*/
AM4372_IOPAD(0x9c8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data9 mode 0*/
AM4372_IOPAD(0xa08, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data0 mode 0*/
AM4372_IOPAD(0xa0c, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data1 mode 0*/
AM4372_IOPAD(0xa10, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data2 mode 0*/
AM4372_IOPAD(0xa14, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data3 mode 0*/
AM4372_IOPAD(0xa18, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data4 mode 0*/
AM4372_IOPAD(0xa1c, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data5 mode 0*/
AM4372_IOPAD(0xa20, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data6 mode 0*/
AM4372_IOPAD(0xa24, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam0_data7 mode 0*/
>;
};
vpfe1_pins_default: vpfe1_pins_default {
pinctrl-single,pins = <
AM4372_IOPAD(0x9cc, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data9 mode 0*/
AM4372_IOPAD(0x9d0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data8 mode 0*/
AM4372_IOPAD(0x9d4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_hd mode 0*/
AM4372_IOPAD(0x9d8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_vd mode 0*/
AM4372_IOPAD(0x9dC, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_pclk mode 0*/
AM4372_IOPAD(0x9e8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data0 mode 0*/
AM4372_IOPAD(0x9ec, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data1 mode 0*/
AM4372_IOPAD(0x9f0, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data2 mode 0*/
AM4372_IOPAD(0x9f4, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data3 mode 0*/
AM4372_IOPAD(0x9f8, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data4 mode 0*/
AM4372_IOPAD(0x9fc, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data5 mode 0*/
AM4372_IOPAD(0xa00, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data6 mode 0*/
AM4372_IOPAD(0xa04, PIN_INPUT_PULLUP | MUX_MODE0) /* cam1_data7 mode 0*/
>;
};
vpfe1_pins_sleep: vpfe1_pins_sleep {
pinctrl-single,pins = <
AM4372_IOPAD(0x9cc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data9 mode 0*/
AM4372_IOPAD(0x9d0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data8 mode 0*/
AM4372_IOPAD(0x9d4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_hd mode 0*/
AM4372_IOPAD(0x9d8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_vd mode 0*/
AM4372_IOPAD(0x9dc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_pclk mode 0*/
AM4372_IOPAD(0x9e8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data0 mode 0*/
AM4372_IOPAD(0x9ec, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data1 mode 0*/
AM4372_IOPAD(0x9f0, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data2 mode 0*/
AM4372_IOPAD(0x9f4, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data3 mode 0*/
AM4372_IOPAD(0x9f8, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data4 mode 0*/
AM4372_IOPAD(0x9fc, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data5 mode 0*/
AM4372_IOPAD(0xa00, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data6 mode 0*/
AM4372_IOPAD(0xa04, DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) /* cam1_data7 mode 0*/
>;
};
mmc3_pins_default: pinmux_mmc3_pins_default {
pinctrl-single,pins = <
AM4372_IOPAD(0x88c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_clk.mmc2_clk */
AM4372_IOPAD(0x888, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_csn3.mmc2_cmd */
AM4372_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a1.mmc2_dat0 */
AM4372_IOPAD(0x848, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a2.mmc2_dat1 */
AM4372_IOPAD(0x84c, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a3.mmc2_dat2 */
AM4372_IOPAD(0x878, PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_be1n.mmc2_dat3 */
>;
};
mmc3_pins_sleep: pinmux_mmc3_pins_sleep {
pinctrl-single,pins = <
AM4372_IOPAD(0x88c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_clk.mmc2_clk */
AM4372_IOPAD(0x888, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn3.mmc2_cmd */
AM4372_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a1.mmc2_dat0 */
AM4372_IOPAD(0x848, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a2.mmc2_dat1 */
AM4372_IOPAD(0x84c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a3.mmc2_dat2 */
AM4372_IOPAD(0x878, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_be1n.mmc2_dat3 */
>;
};
wlan_pins_default: pinmux_wlan_pins_default {
pinctrl-single,pins = <
AM4372_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a4.gpio1_20 WL_EN */
AM4372_IOPAD(0x85c, PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7) /* gpmc_a7.gpio1_23 WL_IRQ*/
AM4372_IOPAD(0x840, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a0.gpio1_16 BT_EN*/
>;
};
wlan_pins_sleep: pinmux_wlan_pins_sleep {
pinctrl-single,pins = <
AM4372_IOPAD(0x850, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a4.gpio1_20 WL_EN */
AM4372_IOPAD(0x85c, PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7) /* gpmc_a7.gpio1_23 WL_IRQ*/
AM4372_IOPAD(0x840, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a0.gpio1_16 BT_EN*/
>;
};
uart3_pins: uart3_pins {
pinctrl-single,pins = <
AM4372_IOPAD(0xa28, PIN_INPUT | MUX_MODE0) /* uart3_rxd.uart3_rxd */
AM4372_IOPAD(0xa2c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_txd.uart3_txd */
AM4372_IOPAD(0xa30, PIN_INPUT_PULLUP | MUX_MODE0) /* uart3_ctsn.uart3_ctsn */
AM4372_IOPAD(0xa34, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_rtsn.uart3_rtsn */
>;
};
mcasp1_pins: mcasp1_pins {
pinctrl-single,pins = <
AM4372_IOPAD(0x908, PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
>;
};
mcasp1_sleep_pins: mcasp1_sleep_pins {
pinctrl-single,pins = <
AM4372_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM4372_IOPAD(0x90c, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM4372_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7)
AM4372_IOPAD(0x944, PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
gpio0_pins: gpio0_pins {
pinctrl-single,pins = <
AM4372_IOPAD(0xa6c, PIN_OUTPUT | MUX_MODE9) /* spi2_cs0.gpio0_23 SEL_eMMCorNANDn */
>;
};
emmc_pins_default: emmc_pins_default {
pinctrl-single,pins = <
AM4372_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
AM4372_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
AM4372_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
AM4372_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
AM4372_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
AM4372_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
AM4372_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
AM4372_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
AM4372_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
AM4372_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
>;
};
emmc_pins_sleep: emmc_pins_sleep {
pinctrl-single,pins = <
AM4372_IOPAD(0x800, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad0.gpio1_0 */
AM4372_IOPAD(0x804, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad1.gpio1_1 */
AM4372_IOPAD(0x808, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad2.gpio1_2 */
AM4372_IOPAD(0x80c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad3.gpio1_3 */
AM4372_IOPAD(0x810, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad4.gpio1_4 */
AM4372_IOPAD(0x814, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad5.gpio1_5 */
AM4372_IOPAD(0x818, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad6.gpio1_6 */
AM4372_IOPAD(0x81c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad7.gpio1_7 */
AM4372_IOPAD(0x880, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn1.gpio1_30 */
AM4372_IOPAD(0x884, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_csn2.gpio1_31 */
>;
};
uart0_pins_default: uart0_pins_default {
pinctrl-single,pins = <
AM4372_IOPAD(0x968, PIN_INPUT | MUX_MODE0) /* uart0_ctsn.uart0_ctsn */
AM4372_IOPAD(0x96C, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_rtsn.uart0_rtsn */
AM4372_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
AM4372_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
>;
};
beeper_pins: beeper_pins {
pinctrl-single,pins = <
AM4372_IOPAD(0x9e0, PIN_OUTPUT_PULLUP | MUX_MODE7) /* cam1_field.gpio4_12 */
>;
};
};
&uart0 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_default>;
};
&i2c0 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins>;
clock-frequency = <100000>;
tps65218: tps65218@24 {
reg = <0x24>;
compatible = "ti,tps65218";
interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* NMIn */
interrupt-controller;
#interrupt-cells = <2>;
dcdc1: regulator-dcdc1 {
regulator-name = "vdd_core";
regulator-min-microvolt = <912000>;
regulator-max-microvolt = <1144000>;
regulator-boot-on;
regulator-always-on;
};
dcdc2: regulator-dcdc2 {
regulator-name = "vdd_mpu";
regulator-min-microvolt = <912000>;
regulator-max-microvolt = <1378000>;
regulator-boot-on;
regulator-always-on;
};
dcdc3: regulator-dcdc3 {
regulator-name = "vdcdc3";
regulator-boot-on;
regulator-always-on;
regulator-state-mem {
regulator-on-in-suspend;
};
regulator-state-disk {
regulator-off-in-suspend;
};
};
dcdc5: regulator-dcdc5 {
regulator-name = "v1_0bat";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-boot-on;
regulator-always-on;
regulator-state-mem {
regulator-on-in-suspend;
};
};
dcdc6: regulator-dcdc6 {
regulator-name = "v1_8bat";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
regulator-state-mem {
regulator-on-in-suspend;
};
};
ldo1: regulator-ldo1 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
};
ov2659@30 {
compatible = "ovti,ov2659";
reg = <0x30>;
clocks = <&refclk 0>;
clock-names = "xvclk";
port {
ov2659_0: endpoint {
remote-endpoint = <&vpfe1_ep>;
link-frequencies = /bits/ 64 <70000000>;
};
};
};
};
&i2c1 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
pixcir_ts@5c {
compatible = "pixcir,pixcir_tangoc";
pinctrl-names = "default";
pinctrl-0 = <&pixcir_ts_pins>;
reg = <0x5c>;
attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
/*
* 0x264 represents the offset of padconf register of
* gpio3_22 from am43xx_pinmux base.
*/
interrupts-extended = <&gpio3 22 IRQ_TYPE_EDGE_FALLING>,
<&am43xx_pinmux 0x264>;
interrupt-names = "tsc", "wakeup";
touchscreen-size-x = <1024>;
touchscreen-size-y = <600>;
wakeup-source;
};
ov2659@30 {
compatible = "ovti,ov2659";
reg = <0x30>;
clocks = <&refclk 0>;
clock-names = "xvclk";
port {
ov2659_1: endpoint {
remote-endpoint = <&vpfe0_ep>;
link-frequencies = /bits/ 64 <70000000>;
};
};
};
tlv320aic3106: tlv320aic3106@1b {
#sound-dai-cells = <0>;
compatible = "ti,tlv320aic3106";
reg = <0x1b>;
status = "okay";
/* Regulators */
IOVDD-supply = <&evm_v3_3d>; /* V3_3D -> <tps63031> EN: V1_8D -> VBAT */
AVDD-supply = <&evm_v3_3d>; /* v3_3AUD -> V3_3D -> ... */
DRVDD-supply = <&evm_v3_3d>; /* v3_3AUD -> V3_3D -> ... */
DVDD-supply = <&ldo1>; /* V1_8D -> LDO1 */
};
};
&epwmss0 {
status = "okay";
};
&tscadc {
status = "okay";
adc {
ti,adc-channels = <0 1 2 3 4 5 6 7>;
};
};
&ecap0 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&ecap0_pins>;
};
&gpio0 {
pinctrl-names = "default";
pinctrl-0 = <&gpio0_pins>;
status = "okay";
p23 {
gpio-hog;
gpios = <23 GPIO_ACTIVE_HIGH>;
/* SelEMMCorNAND selects between eMMC and NAND:
* Low: NAND
* High: eMMC
* When changing this line make sure the newly
* selected device node is enabled and the previously
* selected device node is disabled.
*/
output-low;
line-name = "SelEMMCorNAND";
};
};
&gpio1 {
status = "okay";
};
&gpio3 {
status = "okay";
};
&gpio4 {
status = "okay";
};
&gpio5 {
pinctrl-names = "default";
pinctrl-0 = <&display_mux_pins>;
status = "okay";
ti,no-reset-on-init;
p8 {
/*
* SelLCDorHDMI selects between display and audio paths:
* Low: HDMI display with audio via HDMI
* High: LCD display with analog audio via aic3111 codec
*/
gpio-hog;
gpios = <8 GPIO_ACTIVE_HIGH>;
output-high;
line-name = "SelLCDorHDMI";
};
};
&mmc1 {
status = "okay";
vmmc-supply = <&evm_v3_3d>;
bus-width = <4>;
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
};
/* eMMC sits on mmc2 */
&mmc2 {
/*
* When enabling eMMC, disable GPMC/NAND and set
* SelEMMCorNAND to output-high
*/
status = "disabled";
vmmc-supply = <&evm_v3_3d>;
bus-width = <8>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&emmc_pins_default>;
pinctrl-1 = <&emmc_pins_sleep>;
ti,non-removable;
};
&mmc3 {
status = "okay";
/* these are on the crossbar and are outlined in the
xbar-event-map element */
dmas = <&edma_xbar 30 0 1>,
<&edma_xbar 31 0 2>;
dma-names = "tx", "rx";
vmmc-supply = <&vmmcwl_fixed>;
bus-width = <4>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&mmc3_pins_default>;
pinctrl-1 = <&mmc3_pins_sleep>;
cap-power-off-card;
keep-power-in-suspend;
ti,non-removable;
#address-cells = <1>;
#size-cells = <0>;
wlcore: wlcore@0 {
compatible = "ti,wl1835";
reg = <2>;
interrupt-parent = <&gpio1>;
interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
};
};
&uart3 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins>;
};
&usb2_phy1 {
status = "okay";
};
&usb1 {
dr_mode = "peripheral";
status = "okay";
};
&usb2_phy2 {
status = "okay";
};
&usb2 {
dr_mode = "host";
status = "okay";
};
&mac {
slaves = <1>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&cpsw_default>;
pinctrl-1 = <&cpsw_sleep>;
status = "okay";
};
&davinci_mdio {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
status = "okay";
};
&cpsw_emac0 {
phy_id = <&davinci_mdio>, <0>;
phy-mode = "rgmii";
};
&elm {
status = "okay";
};
&gpmc {
/*
* When enabling GPMC, disable eMMC and set
* SelEMMCorNAND to output-low
*/
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&nand_flash_x8>;
ranges = <0 0 0x08000000 0x01000000>; /* CS0 space. Min partition = 16MB */
nand@0,0 {
compatible = "ti,omap2-nand";
reg = <0 0 4>; /* device IO registers */
interrupt-parent = <&gpmc>;
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
<1 IRQ_TYPE_NONE>; /* termcount */
rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
ti,nand-xfer-type = "prefetch-dma";
ti,nand-ecc-opt = "bch16";
ti,elm-id = <&elm>;
nand-bus-width = <8>;
gpmc,device-width = <1>;
gpmc,sync-clk-ps = <0>;
gpmc,cs-on-ns = <0>;
gpmc,cs-rd-off-ns = <40>;
gpmc,cs-wr-off-ns = <40>;
gpmc,adv-on-ns = <0>;
gpmc,adv-rd-off-ns = <25>;
gpmc,adv-wr-off-ns = <25>;
gpmc,we-on-ns = <0>;
gpmc,we-off-ns = <20>;
gpmc,oe-on-ns = <3>;
gpmc,oe-off-ns = <30>;
gpmc,access-ns = <30>;
gpmc,rd-cycle-ns = <40>;
gpmc,wr-cycle-ns = <40>;
gpmc,bus-turnaround-ns = <0>;
gpmc,cycle2cycle-delay-ns = <0>;
gpmc,clk-activation-ns = <0>;
gpmc,wr-access-ns = <40>;
gpmc,wr-data-mux-bus-ns = <0>;
/* MTD partition table */
/* All SPL-* partitions are sized to minimal length
* which can be independently programmable. For
* NAND flash this is equal to size of erase-block */
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "NAND.SPL";
reg = <0x00000000 0x00040000>;
};
partition@1 {
label = "NAND.SPL.backup1";
reg = <0x00040000 0x00040000>;
};
partition@2 {
label = "NAND.SPL.backup2";
reg = <0x00080000 0x00040000>;
};
partition@3 {
label = "NAND.SPL.backup3";
reg = <0x000c0000 0x00040000>;
};
partition@4 {
label = "NAND.u-boot-spl-os";
reg = <0x00100000 0x00080000>;
};
partition@5 {
label = "NAND.u-boot";
reg = <0x00180000 0x00100000>;
};
partition@6 {
label = "NAND.u-boot-env";
reg = <0x00280000 0x00040000>;
};
partition@7 {
label = "NAND.u-boot-env.backup1";
reg = <0x002c0000 0x00040000>;
};
partition@8 {
label = "NAND.kernel";
reg = <0x00300000 0x00700000>;
};
partition@9 {
label = "NAND.file-system";
reg = <0x00a00000 0x1f600000>;
};
};
};
&dss {
status = "ok";
pinctrl-names = "default";
pinctrl-0 = <&dss_pins>;
port {
dpi_out: endpoint {
remote-endpoint = <&lcd_in>;
data-lines = <24>;
};
};
};
&dcan0 {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&dcan0_default>;
pinctrl-1 = <&dcan0_sleep>;
status = "okay";
};
&dcan1 {
pinctrl-names = "default", "sleep";
pinctrl-0 = <&dcan1_default>;
pinctrl-1 = <&dcan1_sleep>;
status = "okay";
};
&vpfe0 {
status = "okay";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&vpfe0_pins_default>;
pinctrl-1 = <&vpfe0_pins_sleep>;
port {
vpfe0_ep: endpoint {
remote-endpoint = <&ov2659_1>;
ti,am437x-vpfe-interface = <0>;
bus-width = <8>;
hsync-active = <0>;
vsync-active = <0>;
};
};
};
&vpfe1 {
status = "okay";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&vpfe1_pins_default>;
pinctrl-1 = <&vpfe1_pins_sleep>;
port {
vpfe1_ep: endpoint {
remote-endpoint = <&ov2659_0>;
ti,am437x-vpfe-interface = <0>;
bus-width = <8>;
hsync-active = <0>;
vsync-active = <0>;
};
};
};
&mcasp1 {
#sound-dai-cells = <0>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&mcasp1_pins>;
pinctrl-1 = <&mcasp1_sleep_pins>;
status = "okay";
op-mode = <0>; /* MCASP_IIS_MODE */
tdm-slots = <2>;
/* 4 serializers */
serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
0 0 1 2
>;
tx-num-evt = <32>;
rx-num-evt = <32>;
};
&rtc {
clocks = <&clk_32k_rtc>, <&clk_32768_ck>;
clock-names = "ext-clk", "int-clk";
status = "okay";
};
&cpu {
cpu0-supply = <&dcdc2>;
};
View git blame Copy permalink