![Zach Brown](/assets/img/avatar_default.png)
Create an option CONFIG_LED_TRIGGER_PHY (default n), which will create a set of led triggers for each instantiated PHY device. There is one LED trigger per link-speed, per-phy. The triggers are registered during phy_attach and unregistered during phy_detach. This allows for a user to configure their system to allow a set of LEDs not controlled by the phy to represent link state changes on the phy. LEDS controlled by the phy are unaffected. For example, we have a board where some of the leds in the RJ45 socket are controlled by the phy, but others are not. Using the triggers provided by this patch the leds not controlled by the phy can be configured to show the current speed of the ethernet connection. The leds controlled by the phy are unaffected. Signed-off-by: Josh Cartwright <josh.cartwright@ni.com> Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com> Signed-off-by: Zach Brown <zach.brown@ni.com> Signed-off-by: David S. Miller <davem@davemloft.net>
57 lines
2.2 KiB
Makefile
57 lines
2.2 KiB
Makefile
# Makefile for Linux PHY drivers and MDIO bus drivers
|
|
|
|
libphy-y := phy.o phy_device.o mdio_bus.o mdio_device.o
|
|
libphy-$(CONFIG_SWPHY) += swphy.o
|
|
libphy-$(CONFIG_LED_TRIGGER_PHY) += phy_led_triggers.o
|
|
|
|
obj-$(CONFIG_PHYLIB) += libphy.o
|
|
|
|
obj-$(CONFIG_MDIO_BCM_IPROC) += mdio-bcm-iproc.o
|
|
obj-$(CONFIG_MDIO_BCM_UNIMAC) += mdio-bcm-unimac.o
|
|
obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o
|
|
obj-$(CONFIG_MDIO_BUS_MUX) += mdio-mux.o
|
|
obj-$(CONFIG_MDIO_BUS_MUX_BCM_IPROC) += mdio-mux-bcm-iproc.o
|
|
obj-$(CONFIG_MDIO_BUS_MUX_GPIO) += mdio-mux-gpio.o
|
|
obj-$(CONFIG_MDIO_BUS_MUX_MMIOREG) += mdio-mux-mmioreg.o
|
|
obj-$(CONFIG_MDIO_CAVIUM) += mdio-cavium.o
|
|
obj-$(CONFIG_MDIO_GPIO) += mdio-gpio.o
|
|
obj-$(CONFIG_MDIO_HISI_FEMAC) += mdio-hisi-femac.o
|
|
obj-$(CONFIG_MDIO_MOXART) += mdio-moxart.o
|
|
obj-$(CONFIG_MDIO_OCTEON) += mdio-octeon.o
|
|
obj-$(CONFIG_MDIO_SUN4I) += mdio-sun4i.o
|
|
obj-$(CONFIG_MDIO_THUNDER) += mdio-thunder.o
|
|
obj-$(CONFIG_MDIO_XGENE) += mdio-xgene.o
|
|
|
|
obj-$(CONFIG_AMD_PHY) += amd.o
|
|
obj-$(CONFIG_AQUANTIA_PHY) += aquantia.o
|
|
obj-$(CONFIG_AT803X_PHY) += at803x.o
|
|
obj-$(CONFIG_BCM63XX_PHY) += bcm63xx.o
|
|
obj-$(CONFIG_BCM7XXX_PHY) += bcm7xxx.o
|
|
obj-$(CONFIG_BCM87XX_PHY) += bcm87xx.o
|
|
obj-$(CONFIG_BCM_CYGNUS_PHY) += bcm-cygnus.o
|
|
obj-$(CONFIG_BCM_NET_PHYLIB) += bcm-phy-lib.o
|
|
obj-$(CONFIG_BROADCOM_PHY) += broadcom.o
|
|
obj-$(CONFIG_CICADA_PHY) += cicada.o
|
|
obj-$(CONFIG_DAVICOM_PHY) += davicom.o
|
|
obj-$(CONFIG_DP83640_PHY) += dp83640.o
|
|
obj-$(CONFIG_DP83848_PHY) += dp83848.o
|
|
obj-$(CONFIG_DP83867_PHY) += dp83867.o
|
|
obj-$(CONFIG_FIXED_PHY) += fixed_phy.o
|
|
obj-$(CONFIG_ICPLUS_PHY) += icplus.o
|
|
obj-$(CONFIG_INTEL_XWAY_PHY) += intel-xway.o
|
|
obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
|
|
obj-$(CONFIG_LXT_PHY) += lxt.o
|
|
obj-$(CONFIG_MARVELL_PHY) += marvell.o
|
|
obj-$(CONFIG_MICREL_KS8995MA) += spi_ks8995.o
|
|
obj-$(CONFIG_MICREL_PHY) += micrel.o
|
|
obj-$(CONFIG_MICROCHIP_PHY) += microchip.o
|
|
obj-$(CONFIG_MICROSEMI_PHY) += mscc.o
|
|
obj-$(CONFIG_NATIONAL_PHY) += national.o
|
|
obj-$(CONFIG_QSEMI_PHY) += qsemi.o
|
|
obj-$(CONFIG_REALTEK_PHY) += realtek.o
|
|
obj-$(CONFIG_SMSC_PHY) += smsc.o
|
|
obj-$(CONFIG_STE10XP) += ste10Xp.o
|
|
obj-$(CONFIG_TERANETICS_PHY) += teranetics.o
|
|
obj-$(CONFIG_VITESSE_PHY) += vitesse.o
|
|
obj-$(CONFIG_XILINX_GMII2RGMII) += xilinx_gmii2rgmii.o
|