![Christophe JAILLET](/assets/img/avatar_default.png)
Use 'sizeof(*var)' instead of the equivalent 'sizeof(data structure type)' because it is less verbose. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
2069 lines
54 KiB
C
2069 lines
54 KiB
C
/*
|
|
* Copyright (C) 2011 Samsung Electronics Co., Ltd.
|
|
* MyungJoo Ham <myungjoo.ham@samsung.com>
|
|
*
|
|
* This driver enables to monitor battery health and control charger
|
|
* during suspend-to-mem.
|
|
* Charger manager depends on other devices. register this later than
|
|
* the depending devices.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
**/
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/rtc.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/workqueue.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/power/charger-manager.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/sysfs.h>
|
|
#include <linux/of.h>
|
|
#include <linux/thermal.h>
|
|
|
|
/*
|
|
* Default termperature threshold for charging.
|
|
* Every temperature units are in tenth of centigrade.
|
|
*/
|
|
#define CM_DEFAULT_RECHARGE_TEMP_DIFF 50
|
|
#define CM_DEFAULT_CHARGE_TEMP_MAX 500
|
|
|
|
static const char * const default_event_names[] = {
|
|
[CM_EVENT_UNKNOWN] = "Unknown",
|
|
[CM_EVENT_BATT_FULL] = "Battery Full",
|
|
[CM_EVENT_BATT_IN] = "Battery Inserted",
|
|
[CM_EVENT_BATT_OUT] = "Battery Pulled Out",
|
|
[CM_EVENT_BATT_OVERHEAT] = "Battery Overheat",
|
|
[CM_EVENT_BATT_COLD] = "Battery Cold",
|
|
[CM_EVENT_EXT_PWR_IN_OUT] = "External Power Attach/Detach",
|
|
[CM_EVENT_CHG_START_STOP] = "Charging Start/Stop",
|
|
[CM_EVENT_OTHERS] = "Other battery events"
|
|
};
|
|
|
|
/*
|
|
* Regard CM_JIFFIES_SMALL jiffies is small enough to ignore for
|
|
* delayed works so that we can run delayed works with CM_JIFFIES_SMALL
|
|
* without any delays.
|
|
*/
|
|
#define CM_JIFFIES_SMALL (2)
|
|
|
|
/* If y is valid (> 0) and smaller than x, do x = y */
|
|
#define CM_MIN_VALID(x, y) x = (((y > 0) && ((x) > (y))) ? (y) : (x))
|
|
|
|
/*
|
|
* Regard CM_RTC_SMALL (sec) is small enough to ignore error in invoking
|
|
* rtc alarm. It should be 2 or larger
|
|
*/
|
|
#define CM_RTC_SMALL (2)
|
|
|
|
#define UEVENT_BUF_SIZE 32
|
|
|
|
static LIST_HEAD(cm_list);
|
|
static DEFINE_MUTEX(cm_list_mtx);
|
|
|
|
/* About in-suspend (suspend-again) monitoring */
|
|
static struct alarm *cm_timer;
|
|
|
|
static bool cm_suspended;
|
|
static bool cm_timer_set;
|
|
static unsigned long cm_suspend_duration_ms;
|
|
|
|
/* About normal (not suspended) monitoring */
|
|
static unsigned long polling_jiffy = ULONG_MAX; /* ULONG_MAX: no polling */
|
|
static unsigned long next_polling; /* Next appointed polling time */
|
|
static struct workqueue_struct *cm_wq; /* init at driver add */
|
|
static struct delayed_work cm_monitor_work; /* init at driver add */
|
|
|
|
/**
|
|
* is_batt_present - See if the battery presents in place.
|
|
* @cm: the Charger Manager representing the battery.
|
|
*/
|
|
static bool is_batt_present(struct charger_manager *cm)
|
|
{
|
|
union power_supply_propval val;
|
|
struct power_supply *psy;
|
|
bool present = false;
|
|
int i, ret;
|
|
|
|
switch (cm->desc->battery_present) {
|
|
case CM_BATTERY_PRESENT:
|
|
present = true;
|
|
break;
|
|
case CM_NO_BATTERY:
|
|
break;
|
|
case CM_FUEL_GAUGE:
|
|
psy = power_supply_get_by_name(cm->desc->psy_fuel_gauge);
|
|
if (!psy)
|
|
break;
|
|
|
|
ret = power_supply_get_property(psy, POWER_SUPPLY_PROP_PRESENT,
|
|
&val);
|
|
if (ret == 0 && val.intval)
|
|
present = true;
|
|
power_supply_put(psy);
|
|
break;
|
|
case CM_CHARGER_STAT:
|
|
for (i = 0; cm->desc->psy_charger_stat[i]; i++) {
|
|
psy = power_supply_get_by_name(
|
|
cm->desc->psy_charger_stat[i]);
|
|
if (!psy) {
|
|
dev_err(cm->dev, "Cannot find power supply \"%s\"\n",
|
|
cm->desc->psy_charger_stat[i]);
|
|
continue;
|
|
}
|
|
|
|
ret = power_supply_get_property(psy,
|
|
POWER_SUPPLY_PROP_PRESENT, &val);
|
|
power_supply_put(psy);
|
|
if (ret == 0 && val.intval) {
|
|
present = true;
|
|
break;
|
|
}
|
|
}
|
|
break;
|
|
}
|
|
|
|
return present;
|
|
}
|
|
|
|
/**
|
|
* is_ext_pwr_online - See if an external power source is attached to charge
|
|
* @cm: the Charger Manager representing the battery.
|
|
*
|
|
* Returns true if at least one of the chargers of the battery has an external
|
|
* power source attached to charge the battery regardless of whether it is
|
|
* actually charging or not.
|
|
*/
|
|
static bool is_ext_pwr_online(struct charger_manager *cm)
|
|
{
|
|
union power_supply_propval val;
|
|
struct power_supply *psy;
|
|
bool online = false;
|
|
int i, ret;
|
|
|
|
/* If at least one of them has one, it's yes. */
|
|
for (i = 0; cm->desc->psy_charger_stat[i]; i++) {
|
|
psy = power_supply_get_by_name(cm->desc->psy_charger_stat[i]);
|
|
if (!psy) {
|
|
dev_err(cm->dev, "Cannot find power supply \"%s\"\n",
|
|
cm->desc->psy_charger_stat[i]);
|
|
continue;
|
|
}
|
|
|
|
ret = power_supply_get_property(psy, POWER_SUPPLY_PROP_ONLINE,
|
|
&val);
|
|
power_supply_put(psy);
|
|
if (ret == 0 && val.intval) {
|
|
online = true;
|
|
break;
|
|
}
|
|
}
|
|
|
|
return online;
|
|
}
|
|
|
|
/**
|
|
* get_batt_uV - Get the voltage level of the battery
|
|
* @cm: the Charger Manager representing the battery.
|
|
* @uV: the voltage level returned.
|
|
*
|
|
* Returns 0 if there is no error.
|
|
* Returns a negative value on error.
|
|
*/
|
|
static int get_batt_uV(struct charger_manager *cm, int *uV)
|
|
{
|
|
union power_supply_propval val;
|
|
struct power_supply *fuel_gauge;
|
|
int ret;
|
|
|
|
fuel_gauge = power_supply_get_by_name(cm->desc->psy_fuel_gauge);
|
|
if (!fuel_gauge)
|
|
return -ENODEV;
|
|
|
|
ret = power_supply_get_property(fuel_gauge,
|
|
POWER_SUPPLY_PROP_VOLTAGE_NOW, &val);
|
|
power_supply_put(fuel_gauge);
|
|
if (ret)
|
|
return ret;
|
|
|
|
*uV = val.intval;
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* is_charging - Returns true if the battery is being charged.
|
|
* @cm: the Charger Manager representing the battery.
|
|
*/
|
|
static bool is_charging(struct charger_manager *cm)
|
|
{
|
|
int i, ret;
|
|
bool charging = false;
|
|
struct power_supply *psy;
|
|
union power_supply_propval val;
|
|
|
|
/* If there is no battery, it cannot be charged */
|
|
if (!is_batt_present(cm))
|
|
return false;
|
|
|
|
/* If at least one of the charger is charging, return yes */
|
|
for (i = 0; cm->desc->psy_charger_stat[i]; i++) {
|
|
/* 1. The charger sholuld not be DISABLED */
|
|
if (cm->emergency_stop)
|
|
continue;
|
|
if (!cm->charger_enabled)
|
|
continue;
|
|
|
|
psy = power_supply_get_by_name(cm->desc->psy_charger_stat[i]);
|
|
if (!psy) {
|
|
dev_err(cm->dev, "Cannot find power supply \"%s\"\n",
|
|
cm->desc->psy_charger_stat[i]);
|
|
continue;
|
|
}
|
|
|
|
/* 2. The charger should be online (ext-power) */
|
|
ret = power_supply_get_property(psy, POWER_SUPPLY_PROP_ONLINE,
|
|
&val);
|
|
if (ret) {
|
|
dev_warn(cm->dev, "Cannot read ONLINE value from %s\n",
|
|
cm->desc->psy_charger_stat[i]);
|
|
power_supply_put(psy);
|
|
continue;
|
|
}
|
|
if (val.intval == 0) {
|
|
power_supply_put(psy);
|
|
continue;
|
|
}
|
|
|
|
/*
|
|
* 3. The charger should not be FULL, DISCHARGING,
|
|
* or NOT_CHARGING.
|
|
*/
|
|
ret = power_supply_get_property(psy, POWER_SUPPLY_PROP_STATUS,
|
|
&val);
|
|
power_supply_put(psy);
|
|
if (ret) {
|
|
dev_warn(cm->dev, "Cannot read STATUS value from %s\n",
|
|
cm->desc->psy_charger_stat[i]);
|
|
continue;
|
|
}
|
|
if (val.intval == POWER_SUPPLY_STATUS_FULL ||
|
|
val.intval == POWER_SUPPLY_STATUS_DISCHARGING ||
|
|
val.intval == POWER_SUPPLY_STATUS_NOT_CHARGING)
|
|
continue;
|
|
|
|
/* Then, this is charging. */
|
|
charging = true;
|
|
break;
|
|
}
|
|
|
|
return charging;
|
|
}
|
|
|
|
/**
|
|
* is_full_charged - Returns true if the battery is fully charged.
|
|
* @cm: the Charger Manager representing the battery.
|
|
*/
|
|
static bool is_full_charged(struct charger_manager *cm)
|
|
{
|
|
struct charger_desc *desc = cm->desc;
|
|
union power_supply_propval val;
|
|
struct power_supply *fuel_gauge;
|
|
bool is_full = false;
|
|
int ret = 0;
|
|
int uV;
|
|
|
|
/* If there is no battery, it cannot be charged */
|
|
if (!is_batt_present(cm))
|
|
return false;
|
|
|
|
fuel_gauge = power_supply_get_by_name(cm->desc->psy_fuel_gauge);
|
|
if (!fuel_gauge)
|
|
return false;
|
|
|
|
if (desc->fullbatt_full_capacity > 0) {
|
|
val.intval = 0;
|
|
|
|
/* Not full if capacity of fuel gauge isn't full */
|
|
ret = power_supply_get_property(fuel_gauge,
|
|
POWER_SUPPLY_PROP_CHARGE_FULL, &val);
|
|
if (!ret && val.intval > desc->fullbatt_full_capacity) {
|
|
is_full = true;
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
/* Full, if it's over the fullbatt voltage */
|
|
if (desc->fullbatt_uV > 0) {
|
|
ret = get_batt_uV(cm, &uV);
|
|
if (!ret && uV >= desc->fullbatt_uV) {
|
|
is_full = true;
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
/* Full, if the capacity is more than fullbatt_soc */
|
|
if (desc->fullbatt_soc > 0) {
|
|
val.intval = 0;
|
|
|
|
ret = power_supply_get_property(fuel_gauge,
|
|
POWER_SUPPLY_PROP_CAPACITY, &val);
|
|
if (!ret && val.intval >= desc->fullbatt_soc) {
|
|
is_full = true;
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
out:
|
|
power_supply_put(fuel_gauge);
|
|
return is_full;
|
|
}
|
|
|
|
/**
|
|
* is_polling_required - Return true if need to continue polling for this CM.
|
|
* @cm: the Charger Manager representing the battery.
|
|
*/
|
|
static bool is_polling_required(struct charger_manager *cm)
|
|
{
|
|
switch (cm->desc->polling_mode) {
|
|
case CM_POLL_DISABLE:
|
|
return false;
|
|
case CM_POLL_ALWAYS:
|
|
return true;
|
|
case CM_POLL_EXTERNAL_POWER_ONLY:
|
|
return is_ext_pwr_online(cm);
|
|
case CM_POLL_CHARGING_ONLY:
|
|
return is_charging(cm);
|
|
default:
|
|
dev_warn(cm->dev, "Incorrect polling_mode (%d)\n",
|
|
cm->desc->polling_mode);
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
/**
|
|
* try_charger_enable - Enable/Disable chargers altogether
|
|
* @cm: the Charger Manager representing the battery.
|
|
* @enable: true: enable / false: disable
|
|
*
|
|
* Note that Charger Manager keeps the charger enabled regardless whether
|
|
* the charger is charging or not (because battery is full or no external
|
|
* power source exists) except when CM needs to disable chargers forcibly
|
|
* bacause of emergency causes; when the battery is overheated or too cold.
|
|
*/
|
|
static int try_charger_enable(struct charger_manager *cm, bool enable)
|
|
{
|
|
int err = 0, i;
|
|
struct charger_desc *desc = cm->desc;
|
|
|
|
/* Ignore if it's redundent command */
|
|
if (enable == cm->charger_enabled)
|
|
return 0;
|
|
|
|
if (enable) {
|
|
if (cm->emergency_stop)
|
|
return -EAGAIN;
|
|
|
|
/*
|
|
* Save start time of charging to limit
|
|
* maximum possible charging time.
|
|
*/
|
|
cm->charging_start_time = ktime_to_ms(ktime_get());
|
|
cm->charging_end_time = 0;
|
|
|
|
for (i = 0 ; i < desc->num_charger_regulators ; i++) {
|
|
if (desc->charger_regulators[i].externally_control)
|
|
continue;
|
|
|
|
err = regulator_enable(desc->charger_regulators[i].consumer);
|
|
if (err < 0) {
|
|
dev_warn(cm->dev, "Cannot enable %s regulator\n",
|
|
desc->charger_regulators[i].regulator_name);
|
|
}
|
|
}
|
|
} else {
|
|
/*
|
|
* Save end time of charging to maintain fully charged state
|
|
* of battery after full-batt.
|
|
*/
|
|
cm->charging_start_time = 0;
|
|
cm->charging_end_time = ktime_to_ms(ktime_get());
|
|
|
|
for (i = 0 ; i < desc->num_charger_regulators ; i++) {
|
|
if (desc->charger_regulators[i].externally_control)
|
|
continue;
|
|
|
|
err = regulator_disable(desc->charger_regulators[i].consumer);
|
|
if (err < 0) {
|
|
dev_warn(cm->dev, "Cannot disable %s regulator\n",
|
|
desc->charger_regulators[i].regulator_name);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Abnormal battery state - Stop charging forcibly,
|
|
* even if charger was enabled at the other places
|
|
*/
|
|
for (i = 0; i < desc->num_charger_regulators; i++) {
|
|
if (regulator_is_enabled(
|
|
desc->charger_regulators[i].consumer)) {
|
|
regulator_force_disable(
|
|
desc->charger_regulators[i].consumer);
|
|
dev_warn(cm->dev, "Disable regulator(%s) forcibly\n",
|
|
desc->charger_regulators[i].regulator_name);
|
|
}
|
|
}
|
|
}
|
|
|
|
if (!err)
|
|
cm->charger_enabled = enable;
|
|
|
|
return err;
|
|
}
|
|
|
|
/**
|
|
* try_charger_restart - Restart charging.
|
|
* @cm: the Charger Manager representing the battery.
|
|
*
|
|
* Restart charging by turning off and on the charger.
|
|
*/
|
|
static int try_charger_restart(struct charger_manager *cm)
|
|
{
|
|
int err;
|
|
|
|
if (cm->emergency_stop)
|
|
return -EAGAIN;
|
|
|
|
err = try_charger_enable(cm, false);
|
|
if (err)
|
|
return err;
|
|
|
|
return try_charger_enable(cm, true);
|
|
}
|
|
|
|
/**
|
|
* uevent_notify - Let users know something has changed.
|
|
* @cm: the Charger Manager representing the battery.
|
|
* @event: the event string.
|
|
*
|
|
* If @event is null, it implies that uevent_notify is called
|
|
* by resume function. When called in the resume function, cm_suspended
|
|
* should be already reset to false in order to let uevent_notify
|
|
* notify the recent event during the suspend to users. While
|
|
* suspended, uevent_notify does not notify users, but tracks
|
|
* events so that uevent_notify can notify users later after resumed.
|
|
*/
|
|
static void uevent_notify(struct charger_manager *cm, const char *event)
|
|
{
|
|
static char env_str[UEVENT_BUF_SIZE + 1] = "";
|
|
static char env_str_save[UEVENT_BUF_SIZE + 1] = "";
|
|
|
|
if (cm_suspended) {
|
|
/* Nothing in suspended-event buffer */
|
|
if (env_str_save[0] == 0) {
|
|
if (!strncmp(env_str, event, UEVENT_BUF_SIZE))
|
|
return; /* status not changed */
|
|
strncpy(env_str_save, event, UEVENT_BUF_SIZE);
|
|
return;
|
|
}
|
|
|
|
if (!strncmp(env_str_save, event, UEVENT_BUF_SIZE))
|
|
return; /* Duplicated. */
|
|
strncpy(env_str_save, event, UEVENT_BUF_SIZE);
|
|
return;
|
|
}
|
|
|
|
if (event == NULL) {
|
|
/* No messages pending */
|
|
if (!env_str_save[0])
|
|
return;
|
|
|
|
strncpy(env_str, env_str_save, UEVENT_BUF_SIZE);
|
|
kobject_uevent(&cm->dev->kobj, KOBJ_CHANGE);
|
|
env_str_save[0] = 0;
|
|
|
|
return;
|
|
}
|
|
|
|
/* status not changed */
|
|
if (!strncmp(env_str, event, UEVENT_BUF_SIZE))
|
|
return;
|
|
|
|
/* save the status and notify the update */
|
|
strncpy(env_str, event, UEVENT_BUF_SIZE);
|
|
kobject_uevent(&cm->dev->kobj, KOBJ_CHANGE);
|
|
|
|
dev_info(cm->dev, "%s\n", event);
|
|
}
|
|
|
|
/**
|
|
* fullbatt_vchk - Check voltage drop some times after "FULL" event.
|
|
* @work: the work_struct appointing the function
|
|
*
|
|
* If a user has designated "fullbatt_vchkdrop_ms/uV" values with
|
|
* charger_desc, Charger Manager checks voltage drop after the battery
|
|
* "FULL" event. It checks whether the voltage has dropped more than
|
|
* fullbatt_vchkdrop_uV by calling this function after fullbatt_vchkrop_ms.
|
|
*/
|
|
static void fullbatt_vchk(struct work_struct *work)
|
|
{
|
|
struct delayed_work *dwork = to_delayed_work(work);
|
|
struct charger_manager *cm = container_of(dwork,
|
|
struct charger_manager, fullbatt_vchk_work);
|
|
struct charger_desc *desc = cm->desc;
|
|
int batt_uV, err, diff;
|
|
|
|
/* remove the appointment for fullbatt_vchk */
|
|
cm->fullbatt_vchk_jiffies_at = 0;
|
|
|
|
if (!desc->fullbatt_vchkdrop_uV || !desc->fullbatt_vchkdrop_ms)
|
|
return;
|
|
|
|
err = get_batt_uV(cm, &batt_uV);
|
|
if (err) {
|
|
dev_err(cm->dev, "%s: get_batt_uV error(%d)\n", __func__, err);
|
|
return;
|
|
}
|
|
|
|
diff = desc->fullbatt_uV - batt_uV;
|
|
if (diff < 0)
|
|
return;
|
|
|
|
dev_info(cm->dev, "VBATT dropped %duV after full-batt\n", diff);
|
|
|
|
if (diff > desc->fullbatt_vchkdrop_uV) {
|
|
try_charger_restart(cm);
|
|
uevent_notify(cm, "Recharging");
|
|
}
|
|
}
|
|
|
|
/**
|
|
* check_charging_duration - Monitor charging/discharging duration
|
|
* @cm: the Charger Manager representing the battery.
|
|
*
|
|
* If whole charging duration exceed 'charging_max_duration_ms',
|
|
* cm stop charging to prevent overcharge/overheat. If discharging
|
|
* duration exceed 'discharging _max_duration_ms', charger cable is
|
|
* attached, after full-batt, cm start charging to maintain fully
|
|
* charged state for battery.
|
|
*/
|
|
static int check_charging_duration(struct charger_manager *cm)
|
|
{
|
|
struct charger_desc *desc = cm->desc;
|
|
u64 curr = ktime_to_ms(ktime_get());
|
|
u64 duration;
|
|
int ret = false;
|
|
|
|
if (!desc->charging_max_duration_ms &&
|
|
!desc->discharging_max_duration_ms)
|
|
return ret;
|
|
|
|
if (cm->charger_enabled) {
|
|
duration = curr - cm->charging_start_time;
|
|
|
|
if (duration > desc->charging_max_duration_ms) {
|
|
dev_info(cm->dev, "Charging duration exceed %ums\n",
|
|
desc->charging_max_duration_ms);
|
|
uevent_notify(cm, "Discharging");
|
|
try_charger_enable(cm, false);
|
|
ret = true;
|
|
}
|
|
} else if (is_ext_pwr_online(cm) && !cm->charger_enabled) {
|
|
duration = curr - cm->charging_end_time;
|
|
|
|
if (duration > desc->charging_max_duration_ms &&
|
|
is_ext_pwr_online(cm)) {
|
|
dev_info(cm->dev, "Discharging duration exceed %ums\n",
|
|
desc->discharging_max_duration_ms);
|
|
uevent_notify(cm, "Recharging");
|
|
try_charger_enable(cm, true);
|
|
ret = true;
|
|
}
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int cm_get_battery_temperature_by_psy(struct charger_manager *cm,
|
|
int *temp)
|
|
{
|
|
struct power_supply *fuel_gauge;
|
|
int ret;
|
|
|
|
fuel_gauge = power_supply_get_by_name(cm->desc->psy_fuel_gauge);
|
|
if (!fuel_gauge)
|
|
return -ENODEV;
|
|
|
|
ret = power_supply_get_property(fuel_gauge,
|
|
POWER_SUPPLY_PROP_TEMP,
|
|
(union power_supply_propval *)temp);
|
|
power_supply_put(fuel_gauge);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int cm_get_battery_temperature(struct charger_manager *cm,
|
|
int *temp)
|
|
{
|
|
int ret;
|
|
|
|
if (!cm->desc->measure_battery_temp)
|
|
return -ENODEV;
|
|
|
|
#ifdef CONFIG_THERMAL
|
|
if (cm->tzd_batt) {
|
|
ret = thermal_zone_get_temp(cm->tzd_batt, temp);
|
|
if (!ret)
|
|
/* Calibrate temperature unit */
|
|
*temp /= 100;
|
|
} else
|
|
#endif
|
|
{
|
|
/* if-else continued from CONFIG_THERMAL */
|
|
ret = cm_get_battery_temperature_by_psy(cm, temp);
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int cm_check_thermal_status(struct charger_manager *cm)
|
|
{
|
|
struct charger_desc *desc = cm->desc;
|
|
int temp, upper_limit, lower_limit;
|
|
int ret = 0;
|
|
|
|
ret = cm_get_battery_temperature(cm, &temp);
|
|
if (ret) {
|
|
/* FIXME:
|
|
* No information of battery temperature might
|
|
* occur hazadous result. We have to handle it
|
|
* depending on battery type.
|
|
*/
|
|
dev_err(cm->dev, "Failed to get battery temperature\n");
|
|
return 0;
|
|
}
|
|
|
|
upper_limit = desc->temp_max;
|
|
lower_limit = desc->temp_min;
|
|
|
|
if (cm->emergency_stop) {
|
|
upper_limit -= desc->temp_diff;
|
|
lower_limit += desc->temp_diff;
|
|
}
|
|
|
|
if (temp > upper_limit)
|
|
ret = CM_EVENT_BATT_OVERHEAT;
|
|
else if (temp < lower_limit)
|
|
ret = CM_EVENT_BATT_COLD;
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* _cm_monitor - Monitor the temperature and return true for exceptions.
|
|
* @cm: the Charger Manager representing the battery.
|
|
*
|
|
* Returns true if there is an event to notify for the battery.
|
|
* (True if the status of "emergency_stop" changes)
|
|
*/
|
|
static bool _cm_monitor(struct charger_manager *cm)
|
|
{
|
|
int temp_alrt;
|
|
|
|
temp_alrt = cm_check_thermal_status(cm);
|
|
|
|
/* It has been stopped already */
|
|
if (temp_alrt && cm->emergency_stop)
|
|
return false;
|
|
|
|
/*
|
|
* Check temperature whether overheat or cold.
|
|
* If temperature is out of range normal state, stop charging.
|
|
*/
|
|
if (temp_alrt) {
|
|
cm->emergency_stop = temp_alrt;
|
|
if (!try_charger_enable(cm, false))
|
|
uevent_notify(cm, default_event_names[temp_alrt]);
|
|
|
|
/*
|
|
* Check whole charging duration and discharing duration
|
|
* after full-batt.
|
|
*/
|
|
} else if (!cm->emergency_stop && check_charging_duration(cm)) {
|
|
dev_dbg(cm->dev,
|
|
"Charging/Discharging duration is out of range\n");
|
|
/*
|
|
* Check dropped voltage of battery. If battery voltage is more
|
|
* dropped than fullbatt_vchkdrop_uV after fully charged state,
|
|
* charger-manager have to recharge battery.
|
|
*/
|
|
} else if (!cm->emergency_stop && is_ext_pwr_online(cm) &&
|
|
!cm->charger_enabled) {
|
|
fullbatt_vchk(&cm->fullbatt_vchk_work.work);
|
|
|
|
/*
|
|
* Check whether fully charged state to protect overcharge
|
|
* if charger-manager is charging for battery.
|
|
*/
|
|
} else if (!cm->emergency_stop && is_full_charged(cm) &&
|
|
cm->charger_enabled) {
|
|
dev_info(cm->dev, "EVENT_HANDLE: Battery Fully Charged\n");
|
|
uevent_notify(cm, default_event_names[CM_EVENT_BATT_FULL]);
|
|
|
|
try_charger_enable(cm, false);
|
|
|
|
fullbatt_vchk(&cm->fullbatt_vchk_work.work);
|
|
} else {
|
|
cm->emergency_stop = 0;
|
|
if (is_ext_pwr_online(cm)) {
|
|
if (!try_charger_enable(cm, true))
|
|
uevent_notify(cm, "CHARGING");
|
|
}
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
/**
|
|
* cm_monitor - Monitor every battery.
|
|
*
|
|
* Returns true if there is an event to notify from any of the batteries.
|
|
* (True if the status of "emergency_stop" changes)
|
|
*/
|
|
static bool cm_monitor(void)
|
|
{
|
|
bool stop = false;
|
|
struct charger_manager *cm;
|
|
|
|
mutex_lock(&cm_list_mtx);
|
|
|
|
list_for_each_entry(cm, &cm_list, entry) {
|
|
if (_cm_monitor(cm))
|
|
stop = true;
|
|
}
|
|
|
|
mutex_unlock(&cm_list_mtx);
|
|
|
|
return stop;
|
|
}
|
|
|
|
/**
|
|
* _setup_polling - Setup the next instance of polling.
|
|
* @work: work_struct of the function _setup_polling.
|
|
*/
|
|
static void _setup_polling(struct work_struct *work)
|
|
{
|
|
unsigned long min = ULONG_MAX;
|
|
struct charger_manager *cm;
|
|
bool keep_polling = false;
|
|
unsigned long _next_polling;
|
|
|
|
mutex_lock(&cm_list_mtx);
|
|
|
|
list_for_each_entry(cm, &cm_list, entry) {
|
|
if (is_polling_required(cm) && cm->desc->polling_interval_ms) {
|
|
keep_polling = true;
|
|
|
|
if (min > cm->desc->polling_interval_ms)
|
|
min = cm->desc->polling_interval_ms;
|
|
}
|
|
}
|
|
|
|
polling_jiffy = msecs_to_jiffies(min);
|
|
if (polling_jiffy <= CM_JIFFIES_SMALL)
|
|
polling_jiffy = CM_JIFFIES_SMALL + 1;
|
|
|
|
if (!keep_polling)
|
|
polling_jiffy = ULONG_MAX;
|
|
if (polling_jiffy == ULONG_MAX)
|
|
goto out;
|
|
|
|
WARN(cm_wq == NULL, "charger-manager: workqueue not initialized"
|
|
". try it later. %s\n", __func__);
|
|
|
|
/*
|
|
* Use mod_delayed_work() iff the next polling interval should
|
|
* occur before the currently scheduled one. If @cm_monitor_work
|
|
* isn't active, the end result is the same, so no need to worry
|
|
* about stale @next_polling.
|
|
*/
|
|
_next_polling = jiffies + polling_jiffy;
|
|
|
|
if (time_before(_next_polling, next_polling)) {
|
|
mod_delayed_work(cm_wq, &cm_monitor_work, polling_jiffy);
|
|
next_polling = _next_polling;
|
|
} else {
|
|
if (queue_delayed_work(cm_wq, &cm_monitor_work, polling_jiffy))
|
|
next_polling = _next_polling;
|
|
}
|
|
out:
|
|
mutex_unlock(&cm_list_mtx);
|
|
}
|
|
static DECLARE_WORK(setup_polling, _setup_polling);
|
|
|
|
/**
|
|
* cm_monitor_poller - The Monitor / Poller.
|
|
* @work: work_struct of the function cm_monitor_poller
|
|
*
|
|
* During non-suspended state, cm_monitor_poller is used to poll and monitor
|
|
* the batteries.
|
|
*/
|
|
static void cm_monitor_poller(struct work_struct *work)
|
|
{
|
|
cm_monitor();
|
|
schedule_work(&setup_polling);
|
|
}
|
|
|
|
/**
|
|
* fullbatt_handler - Event handler for CM_EVENT_BATT_FULL
|
|
* @cm: the Charger Manager representing the battery.
|
|
*/
|
|
static void fullbatt_handler(struct charger_manager *cm)
|
|
{
|
|
struct charger_desc *desc = cm->desc;
|
|
|
|
if (!desc->fullbatt_vchkdrop_uV || !desc->fullbatt_vchkdrop_ms)
|
|
goto out;
|
|
|
|
if (cm_suspended)
|
|
device_set_wakeup_capable(cm->dev, true);
|
|
|
|
mod_delayed_work(cm_wq, &cm->fullbatt_vchk_work,
|
|
msecs_to_jiffies(desc->fullbatt_vchkdrop_ms));
|
|
cm->fullbatt_vchk_jiffies_at = jiffies + msecs_to_jiffies(
|
|
desc->fullbatt_vchkdrop_ms);
|
|
|
|
if (cm->fullbatt_vchk_jiffies_at == 0)
|
|
cm->fullbatt_vchk_jiffies_at = 1;
|
|
|
|
out:
|
|
dev_info(cm->dev, "EVENT_HANDLE: Battery Fully Charged\n");
|
|
uevent_notify(cm, default_event_names[CM_EVENT_BATT_FULL]);
|
|
}
|
|
|
|
/**
|
|
* battout_handler - Event handler for CM_EVENT_BATT_OUT
|
|
* @cm: the Charger Manager representing the battery.
|
|
*/
|
|
static void battout_handler(struct charger_manager *cm)
|
|
{
|
|
if (cm_suspended)
|
|
device_set_wakeup_capable(cm->dev, true);
|
|
|
|
if (!is_batt_present(cm)) {
|
|
dev_emerg(cm->dev, "Battery Pulled Out!\n");
|
|
uevent_notify(cm, default_event_names[CM_EVENT_BATT_OUT]);
|
|
} else {
|
|
uevent_notify(cm, "Battery Reinserted?");
|
|
}
|
|
}
|
|
|
|
/**
|
|
* misc_event_handler - Handler for other evnets
|
|
* @cm: the Charger Manager representing the battery.
|
|
* @type: the Charger Manager representing the battery.
|
|
*/
|
|
static void misc_event_handler(struct charger_manager *cm,
|
|
enum cm_event_types type)
|
|
{
|
|
if (cm_suspended)
|
|
device_set_wakeup_capable(cm->dev, true);
|
|
|
|
if (is_polling_required(cm) && cm->desc->polling_interval_ms)
|
|
schedule_work(&setup_polling);
|
|
uevent_notify(cm, default_event_names[type]);
|
|
}
|
|
|
|
static int charger_get_property(struct power_supply *psy,
|
|
enum power_supply_property psp,
|
|
union power_supply_propval *val)
|
|
{
|
|
struct charger_manager *cm = power_supply_get_drvdata(psy);
|
|
struct charger_desc *desc = cm->desc;
|
|
struct power_supply *fuel_gauge = NULL;
|
|
int ret = 0;
|
|
int uV;
|
|
|
|
switch (psp) {
|
|
case POWER_SUPPLY_PROP_STATUS:
|
|
if (is_charging(cm))
|
|
val->intval = POWER_SUPPLY_STATUS_CHARGING;
|
|
else if (is_ext_pwr_online(cm))
|
|
val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
|
|
else
|
|
val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
|
|
break;
|
|
case POWER_SUPPLY_PROP_HEALTH:
|
|
if (cm->emergency_stop > 0)
|
|
val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
|
|
else if (cm->emergency_stop < 0)
|
|
val->intval = POWER_SUPPLY_HEALTH_COLD;
|
|
else
|
|
val->intval = POWER_SUPPLY_HEALTH_GOOD;
|
|
break;
|
|
case POWER_SUPPLY_PROP_PRESENT:
|
|
if (is_batt_present(cm))
|
|
val->intval = 1;
|
|
else
|
|
val->intval = 0;
|
|
break;
|
|
case POWER_SUPPLY_PROP_VOLTAGE_NOW:
|
|
ret = get_batt_uV(cm, &val->intval);
|
|
break;
|
|
case POWER_SUPPLY_PROP_CURRENT_NOW:
|
|
fuel_gauge = power_supply_get_by_name(cm->desc->psy_fuel_gauge);
|
|
if (!fuel_gauge) {
|
|
ret = -ENODEV;
|
|
break;
|
|
}
|
|
ret = power_supply_get_property(fuel_gauge,
|
|
POWER_SUPPLY_PROP_CURRENT_NOW, val);
|
|
break;
|
|
case POWER_SUPPLY_PROP_TEMP:
|
|
case POWER_SUPPLY_PROP_TEMP_AMBIENT:
|
|
return cm_get_battery_temperature(cm, &val->intval);
|
|
case POWER_SUPPLY_PROP_CAPACITY:
|
|
if (!is_batt_present(cm)) {
|
|
/* There is no battery. Assume 100% */
|
|
val->intval = 100;
|
|
break;
|
|
}
|
|
|
|
fuel_gauge = power_supply_get_by_name(cm->desc->psy_fuel_gauge);
|
|
if (!fuel_gauge) {
|
|
ret = -ENODEV;
|
|
break;
|
|
}
|
|
|
|
ret = power_supply_get_property(fuel_gauge,
|
|
POWER_SUPPLY_PROP_CAPACITY, val);
|
|
if (ret)
|
|
break;
|
|
|
|
if (val->intval > 100) {
|
|
val->intval = 100;
|
|
break;
|
|
}
|
|
if (val->intval < 0)
|
|
val->intval = 0;
|
|
|
|
/* Do not adjust SOC when charging: voltage is overrated */
|
|
if (is_charging(cm))
|
|
break;
|
|
|
|
/*
|
|
* If the capacity value is inconsistent, calibrate it base on
|
|
* the battery voltage values and the thresholds given as desc
|
|
*/
|
|
ret = get_batt_uV(cm, &uV);
|
|
if (ret) {
|
|
/* Voltage information not available. No calibration */
|
|
ret = 0;
|
|
break;
|
|
}
|
|
|
|
if (desc->fullbatt_uV > 0 && uV >= desc->fullbatt_uV &&
|
|
!is_charging(cm)) {
|
|
val->intval = 100;
|
|
break;
|
|
}
|
|
|
|
break;
|
|
case POWER_SUPPLY_PROP_ONLINE:
|
|
if (is_ext_pwr_online(cm))
|
|
val->intval = 1;
|
|
else
|
|
val->intval = 0;
|
|
break;
|
|
case POWER_SUPPLY_PROP_CHARGE_FULL:
|
|
if (is_full_charged(cm))
|
|
val->intval = 1;
|
|
else
|
|
val->intval = 0;
|
|
ret = 0;
|
|
break;
|
|
case POWER_SUPPLY_PROP_CHARGE_NOW:
|
|
if (is_charging(cm)) {
|
|
fuel_gauge = power_supply_get_by_name(
|
|
cm->desc->psy_fuel_gauge);
|
|
if (!fuel_gauge) {
|
|
ret = -ENODEV;
|
|
break;
|
|
}
|
|
|
|
ret = power_supply_get_property(fuel_gauge,
|
|
POWER_SUPPLY_PROP_CHARGE_NOW,
|
|
val);
|
|
if (ret) {
|
|
val->intval = 1;
|
|
ret = 0;
|
|
} else {
|
|
/* If CHARGE_NOW is supplied, use it */
|
|
val->intval = (val->intval > 0) ?
|
|
val->intval : 1;
|
|
}
|
|
} else {
|
|
val->intval = 0;
|
|
}
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
if (fuel_gauge)
|
|
power_supply_put(fuel_gauge);
|
|
return ret;
|
|
}
|
|
|
|
#define NUM_CHARGER_PSY_OPTIONAL (4)
|
|
static enum power_supply_property default_charger_props[] = {
|
|
/* Guaranteed to provide */
|
|
POWER_SUPPLY_PROP_STATUS,
|
|
POWER_SUPPLY_PROP_HEALTH,
|
|
POWER_SUPPLY_PROP_PRESENT,
|
|
POWER_SUPPLY_PROP_VOLTAGE_NOW,
|
|
POWER_SUPPLY_PROP_CAPACITY,
|
|
POWER_SUPPLY_PROP_ONLINE,
|
|
POWER_SUPPLY_PROP_CHARGE_FULL,
|
|
/*
|
|
* Optional properties are:
|
|
* POWER_SUPPLY_PROP_CHARGE_NOW,
|
|
* POWER_SUPPLY_PROP_CURRENT_NOW,
|
|
* POWER_SUPPLY_PROP_TEMP, and
|
|
* POWER_SUPPLY_PROP_TEMP_AMBIENT,
|
|
*/
|
|
};
|
|
|
|
static const struct power_supply_desc psy_default = {
|
|
.name = "battery",
|
|
.type = POWER_SUPPLY_TYPE_BATTERY,
|
|
.properties = default_charger_props,
|
|
.num_properties = ARRAY_SIZE(default_charger_props),
|
|
.get_property = charger_get_property,
|
|
.no_thermal = true,
|
|
};
|
|
|
|
/**
|
|
* cm_setup_timer - For in-suspend monitoring setup wakeup alarm
|
|
* for suspend_again.
|
|
*
|
|
* Returns true if the alarm is set for Charger Manager to use.
|
|
* Returns false if
|
|
* cm_setup_timer fails to set an alarm,
|
|
* cm_setup_timer does not need to set an alarm for Charger Manager,
|
|
* or an alarm previously configured is to be used.
|
|
*/
|
|
static bool cm_setup_timer(void)
|
|
{
|
|
struct charger_manager *cm;
|
|
unsigned int wakeup_ms = UINT_MAX;
|
|
int timer_req = 0;
|
|
|
|
if (time_after(next_polling, jiffies))
|
|
CM_MIN_VALID(wakeup_ms,
|
|
jiffies_to_msecs(next_polling - jiffies));
|
|
|
|
mutex_lock(&cm_list_mtx);
|
|
list_for_each_entry(cm, &cm_list, entry) {
|
|
unsigned int fbchk_ms = 0;
|
|
|
|
/* fullbatt_vchk is required. setup timer for that */
|
|
if (cm->fullbatt_vchk_jiffies_at) {
|
|
fbchk_ms = jiffies_to_msecs(cm->fullbatt_vchk_jiffies_at
|
|
- jiffies);
|
|
if (time_is_before_eq_jiffies(
|
|
cm->fullbatt_vchk_jiffies_at) ||
|
|
msecs_to_jiffies(fbchk_ms) < CM_JIFFIES_SMALL) {
|
|
fullbatt_vchk(&cm->fullbatt_vchk_work.work);
|
|
fbchk_ms = 0;
|
|
}
|
|
}
|
|
CM_MIN_VALID(wakeup_ms, fbchk_ms);
|
|
|
|
/* Skip if polling is not required for this CM */
|
|
if (!is_polling_required(cm) && !cm->emergency_stop)
|
|
continue;
|
|
timer_req++;
|
|
if (cm->desc->polling_interval_ms == 0)
|
|
continue;
|
|
CM_MIN_VALID(wakeup_ms, cm->desc->polling_interval_ms);
|
|
}
|
|
mutex_unlock(&cm_list_mtx);
|
|
|
|
if (timer_req && cm_timer) {
|
|
ktime_t now, add;
|
|
|
|
/*
|
|
* Set alarm with the polling interval (wakeup_ms)
|
|
* The alarm time should be NOW + CM_RTC_SMALL or later.
|
|
*/
|
|
if (wakeup_ms == UINT_MAX ||
|
|
wakeup_ms < CM_RTC_SMALL * MSEC_PER_SEC)
|
|
wakeup_ms = 2 * CM_RTC_SMALL * MSEC_PER_SEC;
|
|
|
|
pr_info("Charger Manager wakeup timer: %u ms\n", wakeup_ms);
|
|
|
|
now = ktime_get_boottime();
|
|
add = ktime_set(wakeup_ms / MSEC_PER_SEC,
|
|
(wakeup_ms % MSEC_PER_SEC) * NSEC_PER_MSEC);
|
|
alarm_start(cm_timer, ktime_add(now, add));
|
|
|
|
cm_suspend_duration_ms = wakeup_ms;
|
|
|
|
return true;
|
|
}
|
|
return false;
|
|
}
|
|
|
|
/**
|
|
* charger_extcon_work - enable/diable charger according to the state
|
|
* of charger cable
|
|
*
|
|
* @work: work_struct of the function charger_extcon_work.
|
|
*/
|
|
static void charger_extcon_work(struct work_struct *work)
|
|
{
|
|
struct charger_cable *cable =
|
|
container_of(work, struct charger_cable, wq);
|
|
int ret;
|
|
|
|
if (cable->attached && cable->min_uA != 0 && cable->max_uA != 0) {
|
|
ret = regulator_set_current_limit(cable->charger->consumer,
|
|
cable->min_uA, cable->max_uA);
|
|
if (ret < 0) {
|
|
pr_err("Cannot set current limit of %s (%s)\n",
|
|
cable->charger->regulator_name, cable->name);
|
|
return;
|
|
}
|
|
|
|
pr_info("Set current limit of %s : %duA ~ %duA\n",
|
|
cable->charger->regulator_name,
|
|
cable->min_uA, cable->max_uA);
|
|
}
|
|
|
|
try_charger_enable(cable->cm, cable->attached);
|
|
}
|
|
|
|
/**
|
|
* charger_extcon_notifier - receive the state of charger cable
|
|
* when registered cable is attached or detached.
|
|
*
|
|
* @self: the notifier block of the charger_extcon_notifier.
|
|
* @event: the cable state.
|
|
* @ptr: the data pointer of notifier block.
|
|
*/
|
|
static int charger_extcon_notifier(struct notifier_block *self,
|
|
unsigned long event, void *ptr)
|
|
{
|
|
struct charger_cable *cable =
|
|
container_of(self, struct charger_cable, nb);
|
|
|
|
/*
|
|
* The newly state of charger cable.
|
|
* If cable is attached, cable->attached is true.
|
|
*/
|
|
cable->attached = event;
|
|
|
|
/*
|
|
* Setup monitoring to check battery state
|
|
* when charger cable is attached.
|
|
*/
|
|
if (cable->attached && is_polling_required(cable->cm)) {
|
|
cancel_work_sync(&setup_polling);
|
|
schedule_work(&setup_polling);
|
|
}
|
|
|
|
/*
|
|
* Setup work for controlling charger(regulator)
|
|
* according to charger cable.
|
|
*/
|
|
schedule_work(&cable->wq);
|
|
|
|
return NOTIFY_DONE;
|
|
}
|
|
|
|
/**
|
|
* charger_extcon_init - register external connector to use it
|
|
* as the charger cable
|
|
*
|
|
* @cm: the Charger Manager representing the battery.
|
|
* @cable: the Charger cable representing the external connector.
|
|
*/
|
|
static int charger_extcon_init(struct charger_manager *cm,
|
|
struct charger_cable *cable)
|
|
{
|
|
int ret;
|
|
|
|
/*
|
|
* Charger manager use Extcon framework to identify
|
|
* the charger cable among various external connector
|
|
* cable (e.g., TA, USB, MHL, Dock).
|
|
*/
|
|
INIT_WORK(&cable->wq, charger_extcon_work);
|
|
cable->nb.notifier_call = charger_extcon_notifier;
|
|
ret = extcon_register_interest(&cable->extcon_dev,
|
|
cable->extcon_name, cable->name, &cable->nb);
|
|
if (ret < 0) {
|
|
pr_info("Cannot register extcon_dev for %s(cable: %s)\n",
|
|
cable->extcon_name, cable->name);
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* charger_manager_register_extcon - Register extcon device to recevie state
|
|
* of charger cable.
|
|
* @cm: the Charger Manager representing the battery.
|
|
*
|
|
* This function support EXTCON(External Connector) subsystem to detect the
|
|
* state of charger cables for enabling or disabling charger(regulator) and
|
|
* select the charger cable for charging among a number of external cable
|
|
* according to policy of H/W board.
|
|
*/
|
|
static int charger_manager_register_extcon(struct charger_manager *cm)
|
|
{
|
|
struct charger_desc *desc = cm->desc;
|
|
struct charger_regulator *charger;
|
|
int ret;
|
|
int i;
|
|
int j;
|
|
|
|
for (i = 0; i < desc->num_charger_regulators; i++) {
|
|
charger = &desc->charger_regulators[i];
|
|
|
|
charger->consumer = regulator_get(cm->dev,
|
|
charger->regulator_name);
|
|
if (IS_ERR(charger->consumer)) {
|
|
dev_err(cm->dev, "Cannot find charger(%s)\n",
|
|
charger->regulator_name);
|
|
return PTR_ERR(charger->consumer);
|
|
}
|
|
charger->cm = cm;
|
|
|
|
for (j = 0; j < charger->num_cables; j++) {
|
|
struct charger_cable *cable = &charger->cables[j];
|
|
|
|
ret = charger_extcon_init(cm, cable);
|
|
if (ret < 0) {
|
|
dev_err(cm->dev, "Cannot initialize charger(%s)\n",
|
|
charger->regulator_name);
|
|
return ret;
|
|
}
|
|
cable->charger = charger;
|
|
cable->cm = cm;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* help function of sysfs node to control charger(regulator) */
|
|
static ssize_t charger_name_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct charger_regulator *charger
|
|
= container_of(attr, struct charger_regulator, attr_name);
|
|
|
|
return sprintf(buf, "%s\n", charger->regulator_name);
|
|
}
|
|
|
|
static ssize_t charger_state_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct charger_regulator *charger
|
|
= container_of(attr, struct charger_regulator, attr_state);
|
|
int state = 0;
|
|
|
|
if (!charger->externally_control)
|
|
state = regulator_is_enabled(charger->consumer);
|
|
|
|
return sprintf(buf, "%s\n", state ? "enabled" : "disabled");
|
|
}
|
|
|
|
static ssize_t charger_externally_control_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct charger_regulator *charger = container_of(attr,
|
|
struct charger_regulator, attr_externally_control);
|
|
|
|
return sprintf(buf, "%d\n", charger->externally_control);
|
|
}
|
|
|
|
static ssize_t charger_externally_control_store(struct device *dev,
|
|
struct device_attribute *attr, const char *buf,
|
|
size_t count)
|
|
{
|
|
struct charger_regulator *charger
|
|
= container_of(attr, struct charger_regulator,
|
|
attr_externally_control);
|
|
struct charger_manager *cm = charger->cm;
|
|
struct charger_desc *desc = cm->desc;
|
|
int i;
|
|
int ret;
|
|
int externally_control;
|
|
int chargers_externally_control = 1;
|
|
|
|
ret = sscanf(buf, "%d", &externally_control);
|
|
if (ret == 0) {
|
|
ret = -EINVAL;
|
|
return ret;
|
|
}
|
|
|
|
if (!externally_control) {
|
|
charger->externally_control = 0;
|
|
return count;
|
|
}
|
|
|
|
for (i = 0; i < desc->num_charger_regulators; i++) {
|
|
if (&desc->charger_regulators[i] != charger &&
|
|
!desc->charger_regulators[i].externally_control) {
|
|
/*
|
|
* At least, one charger is controlled by
|
|
* charger-manager
|
|
*/
|
|
chargers_externally_control = 0;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (!chargers_externally_control) {
|
|
if (cm->charger_enabled) {
|
|
try_charger_enable(charger->cm, false);
|
|
charger->externally_control = externally_control;
|
|
try_charger_enable(charger->cm, true);
|
|
} else {
|
|
charger->externally_control = externally_control;
|
|
}
|
|
} else {
|
|
dev_warn(cm->dev,
|
|
"'%s' regulator should be controlled in charger-manager because charger-manager must need at least one charger for charging\n",
|
|
charger->regulator_name);
|
|
}
|
|
|
|
return count;
|
|
}
|
|
|
|
/**
|
|
* charger_manager_register_sysfs - Register sysfs entry for each charger
|
|
* @cm: the Charger Manager representing the battery.
|
|
*
|
|
* This function add sysfs entry for charger(regulator) to control charger from
|
|
* user-space. If some development board use one more chargers for charging
|
|
* but only need one charger on specific case which is dependent on user
|
|
* scenario or hardware restrictions, the user enter 1 or 0(zero) to '/sys/
|
|
* class/power_supply/battery/charger.[index]/externally_control'. For example,
|
|
* if user enter 1 to 'sys/class/power_supply/battery/charger.[index]/
|
|
* externally_control, this charger isn't controlled from charger-manager and
|
|
* always stay off state of regulator.
|
|
*/
|
|
static int charger_manager_register_sysfs(struct charger_manager *cm)
|
|
{
|
|
struct charger_desc *desc = cm->desc;
|
|
struct charger_regulator *charger;
|
|
int chargers_externally_control = 1;
|
|
char buf[11];
|
|
char *str;
|
|
int ret;
|
|
int i;
|
|
|
|
/* Create sysfs entry to control charger(regulator) */
|
|
for (i = 0; i < desc->num_charger_regulators; i++) {
|
|
charger = &desc->charger_regulators[i];
|
|
|
|
snprintf(buf, 10, "charger.%d", i);
|
|
str = devm_kzalloc(cm->dev,
|
|
sizeof(char) * (strlen(buf) + 1), GFP_KERNEL);
|
|
if (!str)
|
|
return -ENOMEM;
|
|
|
|
strcpy(str, buf);
|
|
|
|
charger->attrs[0] = &charger->attr_name.attr;
|
|
charger->attrs[1] = &charger->attr_state.attr;
|
|
charger->attrs[2] = &charger->attr_externally_control.attr;
|
|
charger->attrs[3] = NULL;
|
|
charger->attr_g.name = str;
|
|
charger->attr_g.attrs = charger->attrs;
|
|
|
|
sysfs_attr_init(&charger->attr_name.attr);
|
|
charger->attr_name.attr.name = "name";
|
|
charger->attr_name.attr.mode = 0444;
|
|
charger->attr_name.show = charger_name_show;
|
|
|
|
sysfs_attr_init(&charger->attr_state.attr);
|
|
charger->attr_state.attr.name = "state";
|
|
charger->attr_state.attr.mode = 0444;
|
|
charger->attr_state.show = charger_state_show;
|
|
|
|
sysfs_attr_init(&charger->attr_externally_control.attr);
|
|
charger->attr_externally_control.attr.name
|
|
= "externally_control";
|
|
charger->attr_externally_control.attr.mode = 0644;
|
|
charger->attr_externally_control.show
|
|
= charger_externally_control_show;
|
|
charger->attr_externally_control.store
|
|
= charger_externally_control_store;
|
|
|
|
if (!desc->charger_regulators[i].externally_control ||
|
|
!chargers_externally_control)
|
|
chargers_externally_control = 0;
|
|
|
|
dev_info(cm->dev, "'%s' regulator's externally_control is %d\n",
|
|
charger->regulator_name, charger->externally_control);
|
|
|
|
ret = sysfs_create_group(&cm->charger_psy->dev.kobj,
|
|
&charger->attr_g);
|
|
if (ret < 0) {
|
|
dev_err(cm->dev, "Cannot create sysfs entry of %s regulator\n",
|
|
charger->regulator_name);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
if (chargers_externally_control) {
|
|
dev_err(cm->dev, "Cannot register regulator because charger-manager must need at least one charger for charging battery\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cm_init_thermal_data(struct charger_manager *cm,
|
|
struct power_supply *fuel_gauge)
|
|
{
|
|
struct charger_desc *desc = cm->desc;
|
|
union power_supply_propval val;
|
|
int ret;
|
|
|
|
/* Verify whether fuel gauge provides battery temperature */
|
|
ret = power_supply_get_property(fuel_gauge,
|
|
POWER_SUPPLY_PROP_TEMP, &val);
|
|
|
|
if (!ret) {
|
|
cm->charger_psy_desc.properties[cm->charger_psy_desc.num_properties] =
|
|
POWER_SUPPLY_PROP_TEMP;
|
|
cm->charger_psy_desc.num_properties++;
|
|
cm->desc->measure_battery_temp = true;
|
|
}
|
|
#ifdef CONFIG_THERMAL
|
|
if (ret && desc->thermal_zone) {
|
|
cm->tzd_batt =
|
|
thermal_zone_get_zone_by_name(desc->thermal_zone);
|
|
if (IS_ERR(cm->tzd_batt))
|
|
return PTR_ERR(cm->tzd_batt);
|
|
|
|
/* Use external thermometer */
|
|
cm->charger_psy_desc.properties[cm->charger_psy_desc.num_properties] =
|
|
POWER_SUPPLY_PROP_TEMP_AMBIENT;
|
|
cm->charger_psy_desc.num_properties++;
|
|
cm->desc->measure_battery_temp = true;
|
|
ret = 0;
|
|
}
|
|
#endif
|
|
if (cm->desc->measure_battery_temp) {
|
|
/* NOTICE : Default allowable minimum charge temperature is 0 */
|
|
if (!desc->temp_max)
|
|
desc->temp_max = CM_DEFAULT_CHARGE_TEMP_MAX;
|
|
if (!desc->temp_diff)
|
|
desc->temp_diff = CM_DEFAULT_RECHARGE_TEMP_DIFF;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct of_device_id charger_manager_match[] = {
|
|
{
|
|
.compatible = "charger-manager",
|
|
},
|
|
{},
|
|
};
|
|
|
|
static struct charger_desc *of_cm_parse_desc(struct device *dev)
|
|
{
|
|
struct charger_desc *desc;
|
|
struct device_node *np = dev->of_node;
|
|
u32 poll_mode = CM_POLL_DISABLE;
|
|
u32 battery_stat = CM_NO_BATTERY;
|
|
int num_chgs = 0;
|
|
|
|
desc = devm_kzalloc(dev, sizeof(*desc), GFP_KERNEL);
|
|
if (!desc)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
of_property_read_string(np, "cm-name", &desc->psy_name);
|
|
|
|
of_property_read_u32(np, "cm-poll-mode", &poll_mode);
|
|
desc->polling_mode = poll_mode;
|
|
|
|
of_property_read_u32(np, "cm-poll-interval",
|
|
&desc->polling_interval_ms);
|
|
|
|
of_property_read_u32(np, "cm-fullbatt-vchkdrop-ms",
|
|
&desc->fullbatt_vchkdrop_ms);
|
|
of_property_read_u32(np, "cm-fullbatt-vchkdrop-volt",
|
|
&desc->fullbatt_vchkdrop_uV);
|
|
of_property_read_u32(np, "cm-fullbatt-voltage", &desc->fullbatt_uV);
|
|
of_property_read_u32(np, "cm-fullbatt-soc", &desc->fullbatt_soc);
|
|
of_property_read_u32(np, "cm-fullbatt-capacity",
|
|
&desc->fullbatt_full_capacity);
|
|
|
|
of_property_read_u32(np, "cm-battery-stat", &battery_stat);
|
|
desc->battery_present = battery_stat;
|
|
|
|
/* chargers */
|
|
of_property_read_u32(np, "cm-num-chargers", &num_chgs);
|
|
if (num_chgs) {
|
|
/* Allocate empty bin at the tail of array */
|
|
desc->psy_charger_stat = devm_kzalloc(dev, sizeof(char *)
|
|
* (num_chgs + 1), GFP_KERNEL);
|
|
if (desc->psy_charger_stat) {
|
|
int i;
|
|
for (i = 0; i < num_chgs; i++)
|
|
of_property_read_string_index(np, "cm-chargers",
|
|
i, &desc->psy_charger_stat[i]);
|
|
} else {
|
|
return ERR_PTR(-ENOMEM);
|
|
}
|
|
}
|
|
|
|
of_property_read_string(np, "cm-fuel-gauge", &desc->psy_fuel_gauge);
|
|
|
|
of_property_read_string(np, "cm-thermal-zone", &desc->thermal_zone);
|
|
|
|
of_property_read_u32(np, "cm-battery-cold", &desc->temp_min);
|
|
if (of_get_property(np, "cm-battery-cold-in-minus", NULL))
|
|
desc->temp_min *= -1;
|
|
of_property_read_u32(np, "cm-battery-hot", &desc->temp_max);
|
|
of_property_read_u32(np, "cm-battery-temp-diff", &desc->temp_diff);
|
|
|
|
of_property_read_u32(np, "cm-charging-max",
|
|
&desc->charging_max_duration_ms);
|
|
of_property_read_u32(np, "cm-discharging-max",
|
|
&desc->discharging_max_duration_ms);
|
|
|
|
/* battery charger regualtors */
|
|
desc->num_charger_regulators = of_get_child_count(np);
|
|
if (desc->num_charger_regulators) {
|
|
struct charger_regulator *chg_regs;
|
|
struct device_node *child;
|
|
|
|
chg_regs = devm_kzalloc(dev, sizeof(*chg_regs)
|
|
* desc->num_charger_regulators,
|
|
GFP_KERNEL);
|
|
if (!chg_regs)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
desc->charger_regulators = chg_regs;
|
|
|
|
for_each_child_of_node(np, child) {
|
|
struct charger_cable *cables;
|
|
struct device_node *_child;
|
|
|
|
of_property_read_string(child, "cm-regulator-name",
|
|
&chg_regs->regulator_name);
|
|
|
|
/* charger cables */
|
|
chg_regs->num_cables = of_get_child_count(child);
|
|
if (chg_regs->num_cables) {
|
|
cables = devm_kzalloc(dev, sizeof(*cables)
|
|
* chg_regs->num_cables,
|
|
GFP_KERNEL);
|
|
if (!cables) {
|
|
of_node_put(child);
|
|
return ERR_PTR(-ENOMEM);
|
|
}
|
|
|
|
chg_regs->cables = cables;
|
|
|
|
for_each_child_of_node(child, _child) {
|
|
of_property_read_string(_child,
|
|
"cm-cable-name", &cables->name);
|
|
of_property_read_string(_child,
|
|
"cm-cable-extcon",
|
|
&cables->extcon_name);
|
|
of_property_read_u32(_child,
|
|
"cm-cable-min",
|
|
&cables->min_uA);
|
|
of_property_read_u32(_child,
|
|
"cm-cable-max",
|
|
&cables->max_uA);
|
|
cables++;
|
|
}
|
|
}
|
|
chg_regs++;
|
|
}
|
|
}
|
|
return desc;
|
|
}
|
|
|
|
static inline struct charger_desc *cm_get_drv_data(struct platform_device *pdev)
|
|
{
|
|
if (pdev->dev.of_node)
|
|
return of_cm_parse_desc(&pdev->dev);
|
|
return dev_get_platdata(&pdev->dev);
|
|
}
|
|
|
|
static enum alarmtimer_restart cm_timer_func(struct alarm *alarm, ktime_t now)
|
|
{
|
|
cm_timer_set = false;
|
|
return ALARMTIMER_NORESTART;
|
|
}
|
|
|
|
static int charger_manager_probe(struct platform_device *pdev)
|
|
{
|
|
struct charger_desc *desc = cm_get_drv_data(pdev);
|
|
struct charger_manager *cm;
|
|
int ret, i = 0;
|
|
int j = 0;
|
|
union power_supply_propval val;
|
|
struct power_supply *fuel_gauge;
|
|
struct power_supply_config psy_cfg = {};
|
|
|
|
if (IS_ERR(desc)) {
|
|
dev_err(&pdev->dev, "No platform data (desc) found\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
cm = devm_kzalloc(&pdev->dev, sizeof(*cm), GFP_KERNEL);
|
|
if (!cm)
|
|
return -ENOMEM;
|
|
|
|
/* Basic Values. Unspecified are Null or 0 */
|
|
cm->dev = &pdev->dev;
|
|
cm->desc = desc;
|
|
psy_cfg.drv_data = cm;
|
|
|
|
/* Initialize alarm timer */
|
|
if (alarmtimer_get_rtcdev()) {
|
|
cm_timer = devm_kzalloc(cm->dev, sizeof(*cm_timer), GFP_KERNEL);
|
|
if (!cm_timer)
|
|
return -ENOMEM;
|
|
alarm_init(cm_timer, ALARM_BOOTTIME, cm_timer_func);
|
|
}
|
|
|
|
/*
|
|
* Some of the following do not need to be errors.
|
|
* Users may intentionally ignore those features.
|
|
*/
|
|
if (desc->fullbatt_uV == 0) {
|
|
dev_info(&pdev->dev, "Ignoring full-battery voltage threshold as it is not supplied\n");
|
|
}
|
|
if (!desc->fullbatt_vchkdrop_ms || !desc->fullbatt_vchkdrop_uV) {
|
|
dev_info(&pdev->dev, "Disabling full-battery voltage drop checking mechanism as it is not supplied\n");
|
|
desc->fullbatt_vchkdrop_ms = 0;
|
|
desc->fullbatt_vchkdrop_uV = 0;
|
|
}
|
|
if (desc->fullbatt_soc == 0) {
|
|
dev_info(&pdev->dev, "Ignoring full-battery soc(state of charge) threshold as it is not supplied\n");
|
|
}
|
|
if (desc->fullbatt_full_capacity == 0) {
|
|
dev_info(&pdev->dev, "Ignoring full-battery full capacity threshold as it is not supplied\n");
|
|
}
|
|
|
|
if (!desc->charger_regulators || desc->num_charger_regulators < 1) {
|
|
dev_err(&pdev->dev, "charger_regulators undefined\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!desc->psy_charger_stat || !desc->psy_charger_stat[0]) {
|
|
dev_err(&pdev->dev, "No power supply defined\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!desc->psy_fuel_gauge) {
|
|
dev_err(&pdev->dev, "No fuel gauge power supply defined\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Counting index only */
|
|
while (desc->psy_charger_stat[i])
|
|
i++;
|
|
|
|
/* Check if charger's supplies are present at probe */
|
|
for (i = 0; desc->psy_charger_stat[i]; i++) {
|
|
struct power_supply *psy;
|
|
|
|
psy = power_supply_get_by_name(desc->psy_charger_stat[i]);
|
|
if (!psy) {
|
|
dev_err(&pdev->dev, "Cannot find power supply \"%s\"\n",
|
|
desc->psy_charger_stat[i]);
|
|
return -ENODEV;
|
|
}
|
|
power_supply_put(psy);
|
|
}
|
|
|
|
if (desc->polling_interval_ms == 0 ||
|
|
msecs_to_jiffies(desc->polling_interval_ms) <= CM_JIFFIES_SMALL) {
|
|
dev_err(&pdev->dev, "polling_interval_ms is too small\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!desc->charging_max_duration_ms ||
|
|
!desc->discharging_max_duration_ms) {
|
|
dev_info(&pdev->dev, "Cannot limit charging duration checking mechanism to prevent overcharge/overheat and control discharging duration\n");
|
|
desc->charging_max_duration_ms = 0;
|
|
desc->discharging_max_duration_ms = 0;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, cm);
|
|
|
|
memcpy(&cm->charger_psy_desc, &psy_default, sizeof(psy_default));
|
|
|
|
if (!desc->psy_name)
|
|
strncpy(cm->psy_name_buf, psy_default.name, PSY_NAME_MAX);
|
|
else
|
|
strncpy(cm->psy_name_buf, desc->psy_name, PSY_NAME_MAX);
|
|
cm->charger_psy_desc.name = cm->psy_name_buf;
|
|
|
|
/* Allocate for psy properties because they may vary */
|
|
cm->charger_psy_desc.properties = devm_kzalloc(&pdev->dev,
|
|
sizeof(enum power_supply_property)
|
|
* (ARRAY_SIZE(default_charger_props) +
|
|
NUM_CHARGER_PSY_OPTIONAL), GFP_KERNEL);
|
|
if (!cm->charger_psy_desc.properties)
|
|
return -ENOMEM;
|
|
|
|
memcpy(cm->charger_psy_desc.properties, default_charger_props,
|
|
sizeof(enum power_supply_property) *
|
|
ARRAY_SIZE(default_charger_props));
|
|
cm->charger_psy_desc.num_properties = psy_default.num_properties;
|
|
|
|
/* Find which optional psy-properties are available */
|
|
fuel_gauge = power_supply_get_by_name(desc->psy_fuel_gauge);
|
|
if (!fuel_gauge) {
|
|
dev_err(&pdev->dev, "Cannot find power supply \"%s\"\n",
|
|
desc->psy_fuel_gauge);
|
|
return -ENODEV;
|
|
}
|
|
if (!power_supply_get_property(fuel_gauge,
|
|
POWER_SUPPLY_PROP_CHARGE_NOW, &val)) {
|
|
cm->charger_psy_desc.properties[cm->charger_psy_desc.num_properties] =
|
|
POWER_SUPPLY_PROP_CHARGE_NOW;
|
|
cm->charger_psy_desc.num_properties++;
|
|
}
|
|
if (!power_supply_get_property(fuel_gauge,
|
|
POWER_SUPPLY_PROP_CURRENT_NOW,
|
|
&val)) {
|
|
cm->charger_psy_desc.properties[cm->charger_psy_desc.num_properties] =
|
|
POWER_SUPPLY_PROP_CURRENT_NOW;
|
|
cm->charger_psy_desc.num_properties++;
|
|
}
|
|
|
|
ret = cm_init_thermal_data(cm, fuel_gauge);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Failed to initialize thermal data\n");
|
|
cm->desc->measure_battery_temp = false;
|
|
}
|
|
power_supply_put(fuel_gauge);
|
|
|
|
INIT_DELAYED_WORK(&cm->fullbatt_vchk_work, fullbatt_vchk);
|
|
|
|
cm->charger_psy = power_supply_register(&pdev->dev,
|
|
&cm->charger_psy_desc,
|
|
&psy_cfg);
|
|
if (IS_ERR(cm->charger_psy)) {
|
|
dev_err(&pdev->dev, "Cannot register charger-manager with name \"%s\"\n",
|
|
cm->charger_psy_desc.name);
|
|
return PTR_ERR(cm->charger_psy);
|
|
}
|
|
|
|
/* Register extcon device for charger cable */
|
|
ret = charger_manager_register_extcon(cm);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "Cannot initialize extcon device\n");
|
|
goto err_reg_extcon;
|
|
}
|
|
|
|
/* Register sysfs entry for charger(regulator) */
|
|
ret = charger_manager_register_sysfs(cm);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev,
|
|
"Cannot initialize sysfs entry of regulator\n");
|
|
goto err_reg_sysfs;
|
|
}
|
|
|
|
/* Add to the list */
|
|
mutex_lock(&cm_list_mtx);
|
|
list_add(&cm->entry, &cm_list);
|
|
mutex_unlock(&cm_list_mtx);
|
|
|
|
/*
|
|
* Charger-manager is capable of waking up the systme from sleep
|
|
* when event is happend through cm_notify_event()
|
|
*/
|
|
device_init_wakeup(&pdev->dev, true);
|
|
device_set_wakeup_capable(&pdev->dev, false);
|
|
|
|
/*
|
|
* Charger-manager have to check the charging state right after
|
|
* tialization of charger-manager and then update current charging
|
|
* state.
|
|
*/
|
|
cm_monitor();
|
|
|
|
schedule_work(&setup_polling);
|
|
|
|
return 0;
|
|
|
|
err_reg_sysfs:
|
|
for (i = 0; i < desc->num_charger_regulators; i++) {
|
|
struct charger_regulator *charger;
|
|
|
|
charger = &desc->charger_regulators[i];
|
|
sysfs_remove_group(&cm->charger_psy->dev.kobj,
|
|
&charger->attr_g);
|
|
}
|
|
err_reg_extcon:
|
|
for (i = 0; i < desc->num_charger_regulators; i++) {
|
|
struct charger_regulator *charger;
|
|
|
|
charger = &desc->charger_regulators[i];
|
|
for (j = 0; j < charger->num_cables; j++) {
|
|
struct charger_cable *cable = &charger->cables[j];
|
|
/* Remove notifier block if only edev exists */
|
|
if (cable->extcon_dev.edev)
|
|
extcon_unregister_interest(&cable->extcon_dev);
|
|
}
|
|
|
|
regulator_put(desc->charger_regulators[i].consumer);
|
|
}
|
|
|
|
power_supply_unregister(cm->charger_psy);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int charger_manager_remove(struct platform_device *pdev)
|
|
{
|
|
struct charger_manager *cm = platform_get_drvdata(pdev);
|
|
struct charger_desc *desc = cm->desc;
|
|
int i = 0;
|
|
int j = 0;
|
|
|
|
/* Remove from the list */
|
|
mutex_lock(&cm_list_mtx);
|
|
list_del(&cm->entry);
|
|
mutex_unlock(&cm_list_mtx);
|
|
|
|
cancel_work_sync(&setup_polling);
|
|
cancel_delayed_work_sync(&cm_monitor_work);
|
|
|
|
for (i = 0 ; i < desc->num_charger_regulators ; i++) {
|
|
struct charger_regulator *charger
|
|
= &desc->charger_regulators[i];
|
|
for (j = 0 ; j < charger->num_cables ; j++) {
|
|
struct charger_cable *cable = &charger->cables[j];
|
|
extcon_unregister_interest(&cable->extcon_dev);
|
|
}
|
|
}
|
|
|
|
for (i = 0 ; i < desc->num_charger_regulators ; i++)
|
|
regulator_put(desc->charger_regulators[i].consumer);
|
|
|
|
power_supply_unregister(cm->charger_psy);
|
|
|
|
try_charger_enable(cm, false);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct platform_device_id charger_manager_id[] = {
|
|
{ "charger-manager", 0 },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(platform, charger_manager_id);
|
|
|
|
static int cm_suspend_noirq(struct device *dev)
|
|
{
|
|
if (device_may_wakeup(dev)) {
|
|
device_set_wakeup_capable(dev, false);
|
|
return -EAGAIN;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static bool cm_need_to_awake(void)
|
|
{
|
|
struct charger_manager *cm;
|
|
|
|
if (cm_timer)
|
|
return false;
|
|
|
|
mutex_lock(&cm_list_mtx);
|
|
list_for_each_entry(cm, &cm_list, entry) {
|
|
if (is_charging(cm)) {
|
|
mutex_unlock(&cm_list_mtx);
|
|
return true;
|
|
}
|
|
}
|
|
mutex_unlock(&cm_list_mtx);
|
|
|
|
return false;
|
|
}
|
|
|
|
static int cm_suspend_prepare(struct device *dev)
|
|
{
|
|
struct charger_manager *cm = dev_get_drvdata(dev);
|
|
|
|
if (cm_need_to_awake())
|
|
return -EBUSY;
|
|
|
|
if (!cm_suspended)
|
|
cm_suspended = true;
|
|
|
|
cm_timer_set = cm_setup_timer();
|
|
|
|
if (cm_timer_set) {
|
|
cancel_work_sync(&setup_polling);
|
|
cancel_delayed_work_sync(&cm_monitor_work);
|
|
cancel_delayed_work(&cm->fullbatt_vchk_work);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void cm_suspend_complete(struct device *dev)
|
|
{
|
|
struct charger_manager *cm = dev_get_drvdata(dev);
|
|
|
|
if (cm_suspended)
|
|
cm_suspended = false;
|
|
|
|
if (cm_timer_set) {
|
|
ktime_t remain;
|
|
|
|
alarm_cancel(cm_timer);
|
|
cm_timer_set = false;
|
|
remain = alarm_expires_remaining(cm_timer);
|
|
cm_suspend_duration_ms -= ktime_to_ms(remain);
|
|
schedule_work(&setup_polling);
|
|
}
|
|
|
|
_cm_monitor(cm);
|
|
|
|
/* Re-enqueue delayed work (fullbatt_vchk_work) */
|
|
if (cm->fullbatt_vchk_jiffies_at) {
|
|
unsigned long delay = 0;
|
|
unsigned long now = jiffies + CM_JIFFIES_SMALL;
|
|
|
|
if (time_after_eq(now, cm->fullbatt_vchk_jiffies_at)) {
|
|
delay = (unsigned long)((long)now
|
|
- (long)(cm->fullbatt_vchk_jiffies_at));
|
|
delay = jiffies_to_msecs(delay);
|
|
} else {
|
|
delay = 0;
|
|
}
|
|
|
|
/*
|
|
* Account for cm_suspend_duration_ms with assuming that
|
|
* timer stops in suspend.
|
|
*/
|
|
if (delay > cm_suspend_duration_ms)
|
|
delay -= cm_suspend_duration_ms;
|
|
else
|
|
delay = 0;
|
|
|
|
queue_delayed_work(cm_wq, &cm->fullbatt_vchk_work,
|
|
msecs_to_jiffies(delay));
|
|
}
|
|
device_set_wakeup_capable(cm->dev, false);
|
|
}
|
|
|
|
static const struct dev_pm_ops charger_manager_pm = {
|
|
.prepare = cm_suspend_prepare,
|
|
.suspend_noirq = cm_suspend_noirq,
|
|
.complete = cm_suspend_complete,
|
|
};
|
|
|
|
static struct platform_driver charger_manager_driver = {
|
|
.driver = {
|
|
.name = "charger-manager",
|
|
.pm = &charger_manager_pm,
|
|
.of_match_table = charger_manager_match,
|
|
},
|
|
.probe = charger_manager_probe,
|
|
.remove = charger_manager_remove,
|
|
.id_table = charger_manager_id,
|
|
};
|
|
|
|
static int __init charger_manager_init(void)
|
|
{
|
|
cm_wq = create_freezable_workqueue("charger_manager");
|
|
INIT_DELAYED_WORK(&cm_monitor_work, cm_monitor_poller);
|
|
|
|
return platform_driver_register(&charger_manager_driver);
|
|
}
|
|
late_initcall(charger_manager_init);
|
|
|
|
static void __exit charger_manager_cleanup(void)
|
|
{
|
|
destroy_workqueue(cm_wq);
|
|
cm_wq = NULL;
|
|
|
|
platform_driver_unregister(&charger_manager_driver);
|
|
}
|
|
module_exit(charger_manager_cleanup);
|
|
|
|
/**
|
|
* cm_notify_event - charger driver notify Charger Manager of charger event
|
|
* @psy: pointer to instance of charger's power_supply
|
|
* @type: type of charger event
|
|
* @msg: optional message passed to uevent_notify fuction
|
|
*/
|
|
void cm_notify_event(struct power_supply *psy, enum cm_event_types type,
|
|
char *msg)
|
|
{
|
|
struct charger_manager *cm;
|
|
bool found_power_supply = false;
|
|
|
|
if (psy == NULL)
|
|
return;
|
|
|
|
mutex_lock(&cm_list_mtx);
|
|
list_for_each_entry(cm, &cm_list, entry) {
|
|
if (match_string(cm->desc->psy_charger_stat, -1,
|
|
psy->desc->name) >= 0) {
|
|
found_power_supply = true;
|
|
break;
|
|
}
|
|
}
|
|
mutex_unlock(&cm_list_mtx);
|
|
|
|
if (!found_power_supply)
|
|
return;
|
|
|
|
switch (type) {
|
|
case CM_EVENT_BATT_FULL:
|
|
fullbatt_handler(cm);
|
|
break;
|
|
case CM_EVENT_BATT_OUT:
|
|
battout_handler(cm);
|
|
break;
|
|
case CM_EVENT_BATT_IN:
|
|
case CM_EVENT_EXT_PWR_IN_OUT ... CM_EVENT_CHG_START_STOP:
|
|
misc_event_handler(cm, type);
|
|
break;
|
|
case CM_EVENT_UNKNOWN:
|
|
case CM_EVENT_OTHERS:
|
|
uevent_notify(cm, msg ? msg : default_event_names[type]);
|
|
break;
|
|
default:
|
|
dev_err(cm->dev, "%s: type not specified\n", __func__);
|
|
break;
|
|
}
|
|
}
|
|
EXPORT_SYMBOL_GPL(cm_notify_event);
|
|
|
|
MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>");
|
|
MODULE_DESCRIPTION("Charger Manager");
|
|
MODULE_LICENSE("GPL");
|