![Woojung Huh](/assets/img/avatar_default.png)
Adding Microchip 9477 Phy included in KSZ9477 Switch. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Woojung Huh <Woojung.Huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
1035 lines
26 KiB
C
1035 lines
26 KiB
C
/*
|
|
* drivers/net/phy/micrel.c
|
|
*
|
|
* Driver for Micrel PHYs
|
|
*
|
|
* Author: David J. Choi
|
|
*
|
|
* Copyright (c) 2010-2013 Micrel, Inc.
|
|
* Copyright (c) 2014 Johan Hovold <johan@kernel.org>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
* Support : Micrel Phys:
|
|
* Giga phys: ksz9021, ksz9031
|
|
* 100/10 Phys : ksz8001, ksz8721, ksz8737, ksz8041
|
|
* ksz8021, ksz8031, ksz8051,
|
|
* ksz8081, ksz8091,
|
|
* ksz8061,
|
|
* Switch : ksz8873, ksz886x
|
|
* ksz9477
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/micrel_phy.h>
|
|
#include <linux/of.h>
|
|
#include <linux/clk.h>
|
|
|
|
/* Operation Mode Strap Override */
|
|
#define MII_KSZPHY_OMSO 0x16
|
|
#define KSZPHY_OMSO_B_CAST_OFF BIT(9)
|
|
#define KSZPHY_OMSO_NAND_TREE_ON BIT(5)
|
|
#define KSZPHY_OMSO_RMII_OVERRIDE BIT(1)
|
|
#define KSZPHY_OMSO_MII_OVERRIDE BIT(0)
|
|
|
|
/* general Interrupt control/status reg in vendor specific block. */
|
|
#define MII_KSZPHY_INTCS 0x1B
|
|
#define KSZPHY_INTCS_JABBER BIT(15)
|
|
#define KSZPHY_INTCS_RECEIVE_ERR BIT(14)
|
|
#define KSZPHY_INTCS_PAGE_RECEIVE BIT(13)
|
|
#define KSZPHY_INTCS_PARELLEL BIT(12)
|
|
#define KSZPHY_INTCS_LINK_PARTNER_ACK BIT(11)
|
|
#define KSZPHY_INTCS_LINK_DOWN BIT(10)
|
|
#define KSZPHY_INTCS_REMOTE_FAULT BIT(9)
|
|
#define KSZPHY_INTCS_LINK_UP BIT(8)
|
|
#define KSZPHY_INTCS_ALL (KSZPHY_INTCS_LINK_UP |\
|
|
KSZPHY_INTCS_LINK_DOWN)
|
|
|
|
/* PHY Control 1 */
|
|
#define MII_KSZPHY_CTRL_1 0x1e
|
|
|
|
/* PHY Control 2 / PHY Control (if no PHY Control 1) */
|
|
#define MII_KSZPHY_CTRL_2 0x1f
|
|
#define MII_KSZPHY_CTRL MII_KSZPHY_CTRL_2
|
|
/* bitmap of PHY register to set interrupt mode */
|
|
#define KSZPHY_CTRL_INT_ACTIVE_HIGH BIT(9)
|
|
#define KSZPHY_RMII_REF_CLK_SEL BIT(7)
|
|
|
|
/* Write/read to/from extended registers */
|
|
#define MII_KSZPHY_EXTREG 0x0b
|
|
#define KSZPHY_EXTREG_WRITE 0x8000
|
|
|
|
#define MII_KSZPHY_EXTREG_WRITE 0x0c
|
|
#define MII_KSZPHY_EXTREG_READ 0x0d
|
|
|
|
/* Extended registers */
|
|
#define MII_KSZPHY_CLK_CONTROL_PAD_SKEW 0x104
|
|
#define MII_KSZPHY_RX_DATA_PAD_SKEW 0x105
|
|
#define MII_KSZPHY_TX_DATA_PAD_SKEW 0x106
|
|
|
|
#define PS_TO_REG 200
|
|
|
|
struct kszphy_hw_stat {
|
|
const char *string;
|
|
u8 reg;
|
|
u8 bits;
|
|
};
|
|
|
|
static struct kszphy_hw_stat kszphy_hw_stats[] = {
|
|
{ "phy_receive_errors", 21, 16},
|
|
{ "phy_idle_errors", 10, 8 },
|
|
};
|
|
|
|
struct kszphy_type {
|
|
u32 led_mode_reg;
|
|
u16 interrupt_level_mask;
|
|
bool has_broadcast_disable;
|
|
bool has_nand_tree_disable;
|
|
bool has_rmii_ref_clk_sel;
|
|
};
|
|
|
|
struct kszphy_priv {
|
|
const struct kszphy_type *type;
|
|
int led_mode;
|
|
bool rmii_ref_clk_sel;
|
|
bool rmii_ref_clk_sel_val;
|
|
u64 stats[ARRAY_SIZE(kszphy_hw_stats)];
|
|
};
|
|
|
|
static const struct kszphy_type ksz8021_type = {
|
|
.led_mode_reg = MII_KSZPHY_CTRL_2,
|
|
.has_broadcast_disable = true,
|
|
.has_nand_tree_disable = true,
|
|
.has_rmii_ref_clk_sel = true,
|
|
};
|
|
|
|
static const struct kszphy_type ksz8041_type = {
|
|
.led_mode_reg = MII_KSZPHY_CTRL_1,
|
|
};
|
|
|
|
static const struct kszphy_type ksz8051_type = {
|
|
.led_mode_reg = MII_KSZPHY_CTRL_2,
|
|
.has_nand_tree_disable = true,
|
|
};
|
|
|
|
static const struct kszphy_type ksz8081_type = {
|
|
.led_mode_reg = MII_KSZPHY_CTRL_2,
|
|
.has_broadcast_disable = true,
|
|
.has_nand_tree_disable = true,
|
|
.has_rmii_ref_clk_sel = true,
|
|
};
|
|
|
|
static const struct kszphy_type ks8737_type = {
|
|
.interrupt_level_mask = BIT(14),
|
|
};
|
|
|
|
static const struct kszphy_type ksz9021_type = {
|
|
.interrupt_level_mask = BIT(14),
|
|
};
|
|
|
|
static int kszphy_extended_write(struct phy_device *phydev,
|
|
u32 regnum, u16 val)
|
|
{
|
|
phy_write(phydev, MII_KSZPHY_EXTREG, KSZPHY_EXTREG_WRITE | regnum);
|
|
return phy_write(phydev, MII_KSZPHY_EXTREG_WRITE, val);
|
|
}
|
|
|
|
static int kszphy_extended_read(struct phy_device *phydev,
|
|
u32 regnum)
|
|
{
|
|
phy_write(phydev, MII_KSZPHY_EXTREG, regnum);
|
|
return phy_read(phydev, MII_KSZPHY_EXTREG_READ);
|
|
}
|
|
|
|
static int kszphy_ack_interrupt(struct phy_device *phydev)
|
|
{
|
|
/* bit[7..0] int status, which is a read and clear register. */
|
|
int rc;
|
|
|
|
rc = phy_read(phydev, MII_KSZPHY_INTCS);
|
|
|
|
return (rc < 0) ? rc : 0;
|
|
}
|
|
|
|
static int kszphy_config_intr(struct phy_device *phydev)
|
|
{
|
|
const struct kszphy_type *type = phydev->drv->driver_data;
|
|
int temp;
|
|
u16 mask;
|
|
|
|
if (type && type->interrupt_level_mask)
|
|
mask = type->interrupt_level_mask;
|
|
else
|
|
mask = KSZPHY_CTRL_INT_ACTIVE_HIGH;
|
|
|
|
/* set the interrupt pin active low */
|
|
temp = phy_read(phydev, MII_KSZPHY_CTRL);
|
|
if (temp < 0)
|
|
return temp;
|
|
temp &= ~mask;
|
|
phy_write(phydev, MII_KSZPHY_CTRL, temp);
|
|
|
|
/* enable / disable interrupts */
|
|
if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
|
|
temp = KSZPHY_INTCS_ALL;
|
|
else
|
|
temp = 0;
|
|
|
|
return phy_write(phydev, MII_KSZPHY_INTCS, temp);
|
|
}
|
|
|
|
static int kszphy_rmii_clk_sel(struct phy_device *phydev, bool val)
|
|
{
|
|
int ctrl;
|
|
|
|
ctrl = phy_read(phydev, MII_KSZPHY_CTRL);
|
|
if (ctrl < 0)
|
|
return ctrl;
|
|
|
|
if (val)
|
|
ctrl |= KSZPHY_RMII_REF_CLK_SEL;
|
|
else
|
|
ctrl &= ~KSZPHY_RMII_REF_CLK_SEL;
|
|
|
|
return phy_write(phydev, MII_KSZPHY_CTRL, ctrl);
|
|
}
|
|
|
|
static int kszphy_setup_led(struct phy_device *phydev, u32 reg, int val)
|
|
{
|
|
int rc, temp, shift;
|
|
|
|
switch (reg) {
|
|
case MII_KSZPHY_CTRL_1:
|
|
shift = 14;
|
|
break;
|
|
case MII_KSZPHY_CTRL_2:
|
|
shift = 4;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
temp = phy_read(phydev, reg);
|
|
if (temp < 0) {
|
|
rc = temp;
|
|
goto out;
|
|
}
|
|
|
|
temp &= ~(3 << shift);
|
|
temp |= val << shift;
|
|
rc = phy_write(phydev, reg, temp);
|
|
out:
|
|
if (rc < 0)
|
|
phydev_err(phydev, "failed to set led mode\n");
|
|
|
|
return rc;
|
|
}
|
|
|
|
/* Disable PHY address 0 as the broadcast address, so that it can be used as a
|
|
* unique (non-broadcast) address on a shared bus.
|
|
*/
|
|
static int kszphy_broadcast_disable(struct phy_device *phydev)
|
|
{
|
|
int ret;
|
|
|
|
ret = phy_read(phydev, MII_KSZPHY_OMSO);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
ret = phy_write(phydev, MII_KSZPHY_OMSO, ret | KSZPHY_OMSO_B_CAST_OFF);
|
|
out:
|
|
if (ret)
|
|
phydev_err(phydev, "failed to disable broadcast address\n");
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int kszphy_nand_tree_disable(struct phy_device *phydev)
|
|
{
|
|
int ret;
|
|
|
|
ret = phy_read(phydev, MII_KSZPHY_OMSO);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
if (!(ret & KSZPHY_OMSO_NAND_TREE_ON))
|
|
return 0;
|
|
|
|
ret = phy_write(phydev, MII_KSZPHY_OMSO,
|
|
ret & ~KSZPHY_OMSO_NAND_TREE_ON);
|
|
out:
|
|
if (ret)
|
|
phydev_err(phydev, "failed to disable NAND tree mode\n");
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int kszphy_config_init(struct phy_device *phydev)
|
|
{
|
|
struct kszphy_priv *priv = phydev->priv;
|
|
const struct kszphy_type *type;
|
|
int ret;
|
|
|
|
if (!priv)
|
|
return 0;
|
|
|
|
type = priv->type;
|
|
|
|
if (type->has_broadcast_disable)
|
|
kszphy_broadcast_disable(phydev);
|
|
|
|
if (type->has_nand_tree_disable)
|
|
kszphy_nand_tree_disable(phydev);
|
|
|
|
if (priv->rmii_ref_clk_sel) {
|
|
ret = kszphy_rmii_clk_sel(phydev, priv->rmii_ref_clk_sel_val);
|
|
if (ret) {
|
|
phydev_err(phydev,
|
|
"failed to set rmii reference clock\n");
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
if (priv->led_mode >= 0)
|
|
kszphy_setup_led(phydev, type->led_mode_reg, priv->led_mode);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ksz8041_config_init(struct phy_device *phydev)
|
|
{
|
|
struct device_node *of_node = phydev->mdio.dev.of_node;
|
|
|
|
/* Limit supported and advertised modes in fiber mode */
|
|
if (of_property_read_bool(of_node, "micrel,fiber-mode")) {
|
|
phydev->dev_flags |= MICREL_PHY_FXEN;
|
|
phydev->supported &= SUPPORTED_100baseT_Full |
|
|
SUPPORTED_100baseT_Half;
|
|
phydev->supported |= SUPPORTED_FIBRE;
|
|
phydev->advertising &= ADVERTISED_100baseT_Full |
|
|
ADVERTISED_100baseT_Half;
|
|
phydev->advertising |= ADVERTISED_FIBRE;
|
|
phydev->autoneg = AUTONEG_DISABLE;
|
|
}
|
|
|
|
return kszphy_config_init(phydev);
|
|
}
|
|
|
|
static int ksz8041_config_aneg(struct phy_device *phydev)
|
|
{
|
|
/* Skip auto-negotiation in fiber mode */
|
|
if (phydev->dev_flags & MICREL_PHY_FXEN) {
|
|
phydev->speed = SPEED_100;
|
|
return 0;
|
|
}
|
|
|
|
return genphy_config_aneg(phydev);
|
|
}
|
|
|
|
static int ksz9021_load_values_from_of(struct phy_device *phydev,
|
|
const struct device_node *of_node,
|
|
u16 reg,
|
|
const char *field1, const char *field2,
|
|
const char *field3, const char *field4)
|
|
{
|
|
int val1 = -1;
|
|
int val2 = -2;
|
|
int val3 = -3;
|
|
int val4 = -4;
|
|
int newval;
|
|
int matches = 0;
|
|
|
|
if (!of_property_read_u32(of_node, field1, &val1))
|
|
matches++;
|
|
|
|
if (!of_property_read_u32(of_node, field2, &val2))
|
|
matches++;
|
|
|
|
if (!of_property_read_u32(of_node, field3, &val3))
|
|
matches++;
|
|
|
|
if (!of_property_read_u32(of_node, field4, &val4))
|
|
matches++;
|
|
|
|
if (!matches)
|
|
return 0;
|
|
|
|
if (matches < 4)
|
|
newval = kszphy_extended_read(phydev, reg);
|
|
else
|
|
newval = 0;
|
|
|
|
if (val1 != -1)
|
|
newval = ((newval & 0xfff0) | ((val1 / PS_TO_REG) & 0xf) << 0);
|
|
|
|
if (val2 != -2)
|
|
newval = ((newval & 0xff0f) | ((val2 / PS_TO_REG) & 0xf) << 4);
|
|
|
|
if (val3 != -3)
|
|
newval = ((newval & 0xf0ff) | ((val3 / PS_TO_REG) & 0xf) << 8);
|
|
|
|
if (val4 != -4)
|
|
newval = ((newval & 0x0fff) | ((val4 / PS_TO_REG) & 0xf) << 12);
|
|
|
|
return kszphy_extended_write(phydev, reg, newval);
|
|
}
|
|
|
|
static int ksz9021_config_init(struct phy_device *phydev)
|
|
{
|
|
const struct device *dev = &phydev->mdio.dev;
|
|
const struct device_node *of_node = dev->of_node;
|
|
const struct device *dev_walker;
|
|
|
|
/* The Micrel driver has a deprecated option to place phy OF
|
|
* properties in the MAC node. Walk up the tree of devices to
|
|
* find a device with an OF node.
|
|
*/
|
|
dev_walker = &phydev->mdio.dev;
|
|
do {
|
|
of_node = dev_walker->of_node;
|
|
dev_walker = dev_walker->parent;
|
|
|
|
} while (!of_node && dev_walker);
|
|
|
|
if (of_node) {
|
|
ksz9021_load_values_from_of(phydev, of_node,
|
|
MII_KSZPHY_CLK_CONTROL_PAD_SKEW,
|
|
"txen-skew-ps", "txc-skew-ps",
|
|
"rxdv-skew-ps", "rxc-skew-ps");
|
|
ksz9021_load_values_from_of(phydev, of_node,
|
|
MII_KSZPHY_RX_DATA_PAD_SKEW,
|
|
"rxd0-skew-ps", "rxd1-skew-ps",
|
|
"rxd2-skew-ps", "rxd3-skew-ps");
|
|
ksz9021_load_values_from_of(phydev, of_node,
|
|
MII_KSZPHY_TX_DATA_PAD_SKEW,
|
|
"txd0-skew-ps", "txd1-skew-ps",
|
|
"txd2-skew-ps", "txd3-skew-ps");
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
#define MII_KSZ9031RN_MMD_CTRL_REG 0x0d
|
|
#define MII_KSZ9031RN_MMD_REGDATA_REG 0x0e
|
|
#define OP_DATA 1
|
|
#define KSZ9031_PS_TO_REG 60
|
|
|
|
/* Extended registers */
|
|
/* MMD Address 0x0 */
|
|
#define MII_KSZ9031RN_FLP_BURST_TX_LO 3
|
|
#define MII_KSZ9031RN_FLP_BURST_TX_HI 4
|
|
|
|
/* MMD Address 0x2 */
|
|
#define MII_KSZ9031RN_CONTROL_PAD_SKEW 4
|
|
#define MII_KSZ9031RN_RX_DATA_PAD_SKEW 5
|
|
#define MII_KSZ9031RN_TX_DATA_PAD_SKEW 6
|
|
#define MII_KSZ9031RN_CLK_PAD_SKEW 8
|
|
|
|
/* MMD Address 0x1C */
|
|
#define MII_KSZ9031RN_EDPD 0x23
|
|
#define MII_KSZ9031RN_EDPD_ENABLE BIT(0)
|
|
|
|
static int ksz9031_extended_write(struct phy_device *phydev,
|
|
u8 mode, u32 dev_addr, u32 regnum, u16 val)
|
|
{
|
|
phy_write(phydev, MII_KSZ9031RN_MMD_CTRL_REG, dev_addr);
|
|
phy_write(phydev, MII_KSZ9031RN_MMD_REGDATA_REG, regnum);
|
|
phy_write(phydev, MII_KSZ9031RN_MMD_CTRL_REG, (mode << 14) | dev_addr);
|
|
return phy_write(phydev, MII_KSZ9031RN_MMD_REGDATA_REG, val);
|
|
}
|
|
|
|
static int ksz9031_extended_read(struct phy_device *phydev,
|
|
u8 mode, u32 dev_addr, u32 regnum)
|
|
{
|
|
phy_write(phydev, MII_KSZ9031RN_MMD_CTRL_REG, dev_addr);
|
|
phy_write(phydev, MII_KSZ9031RN_MMD_REGDATA_REG, regnum);
|
|
phy_write(phydev, MII_KSZ9031RN_MMD_CTRL_REG, (mode << 14) | dev_addr);
|
|
return phy_read(phydev, MII_KSZ9031RN_MMD_REGDATA_REG);
|
|
}
|
|
|
|
static int ksz9031_of_load_skew_values(struct phy_device *phydev,
|
|
const struct device_node *of_node,
|
|
u16 reg, size_t field_sz,
|
|
const char *field[], u8 numfields)
|
|
{
|
|
int val[4] = {-1, -2, -3, -4};
|
|
int matches = 0;
|
|
u16 mask;
|
|
u16 maxval;
|
|
u16 newval;
|
|
int i;
|
|
|
|
for (i = 0; i < numfields; i++)
|
|
if (!of_property_read_u32(of_node, field[i], val + i))
|
|
matches++;
|
|
|
|
if (!matches)
|
|
return 0;
|
|
|
|
if (matches < numfields)
|
|
newval = ksz9031_extended_read(phydev, OP_DATA, 2, reg);
|
|
else
|
|
newval = 0;
|
|
|
|
maxval = (field_sz == 4) ? 0xf : 0x1f;
|
|
for (i = 0; i < numfields; i++)
|
|
if (val[i] != -(i + 1)) {
|
|
mask = 0xffff;
|
|
mask ^= maxval << (field_sz * i);
|
|
newval = (newval & mask) |
|
|
(((val[i] / KSZ9031_PS_TO_REG) & maxval)
|
|
<< (field_sz * i));
|
|
}
|
|
|
|
return ksz9031_extended_write(phydev, OP_DATA, 2, reg, newval);
|
|
}
|
|
|
|
static int ksz9031_center_flp_timing(struct phy_device *phydev)
|
|
{
|
|
int result;
|
|
|
|
/* Center KSZ9031RNX FLP timing at 16ms. */
|
|
result = ksz9031_extended_write(phydev, OP_DATA, 0,
|
|
MII_KSZ9031RN_FLP_BURST_TX_HI, 0x0006);
|
|
result = ksz9031_extended_write(phydev, OP_DATA, 0,
|
|
MII_KSZ9031RN_FLP_BURST_TX_LO, 0x1A80);
|
|
|
|
if (result)
|
|
return result;
|
|
|
|
return genphy_restart_aneg(phydev);
|
|
}
|
|
|
|
/* Enable energy-detect power-down mode */
|
|
static int ksz9031_enable_edpd(struct phy_device *phydev)
|
|
{
|
|
int reg;
|
|
|
|
reg = ksz9031_extended_read(phydev, OP_DATA, 0x1C, MII_KSZ9031RN_EDPD);
|
|
if (reg < 0)
|
|
return reg;
|
|
return ksz9031_extended_write(phydev, OP_DATA, 0x1C, MII_KSZ9031RN_EDPD,
|
|
reg | MII_KSZ9031RN_EDPD_ENABLE);
|
|
}
|
|
|
|
static int ksz9031_config_init(struct phy_device *phydev)
|
|
{
|
|
const struct device *dev = &phydev->mdio.dev;
|
|
const struct device_node *of_node = dev->of_node;
|
|
static const char *clk_skews[2] = {"rxc-skew-ps", "txc-skew-ps"};
|
|
static const char *rx_data_skews[4] = {
|
|
"rxd0-skew-ps", "rxd1-skew-ps",
|
|
"rxd2-skew-ps", "rxd3-skew-ps"
|
|
};
|
|
static const char *tx_data_skews[4] = {
|
|
"txd0-skew-ps", "txd1-skew-ps",
|
|
"txd2-skew-ps", "txd3-skew-ps"
|
|
};
|
|
static const char *control_skews[2] = {"txen-skew-ps", "rxdv-skew-ps"};
|
|
const struct device *dev_walker;
|
|
int result;
|
|
|
|
result = ksz9031_enable_edpd(phydev);
|
|
if (result < 0)
|
|
return result;
|
|
|
|
/* The Micrel driver has a deprecated option to place phy OF
|
|
* properties in the MAC node. Walk up the tree of devices to
|
|
* find a device with an OF node.
|
|
*/
|
|
dev_walker = &phydev->mdio.dev;
|
|
do {
|
|
of_node = dev_walker->of_node;
|
|
dev_walker = dev_walker->parent;
|
|
} while (!of_node && dev_walker);
|
|
|
|
if (of_node) {
|
|
ksz9031_of_load_skew_values(phydev, of_node,
|
|
MII_KSZ9031RN_CLK_PAD_SKEW, 5,
|
|
clk_skews, 2);
|
|
|
|
ksz9031_of_load_skew_values(phydev, of_node,
|
|
MII_KSZ9031RN_CONTROL_PAD_SKEW, 4,
|
|
control_skews, 2);
|
|
|
|
ksz9031_of_load_skew_values(phydev, of_node,
|
|
MII_KSZ9031RN_RX_DATA_PAD_SKEW, 4,
|
|
rx_data_skews, 4);
|
|
|
|
ksz9031_of_load_skew_values(phydev, of_node,
|
|
MII_KSZ9031RN_TX_DATA_PAD_SKEW, 4,
|
|
tx_data_skews, 4);
|
|
}
|
|
|
|
return ksz9031_center_flp_timing(phydev);
|
|
}
|
|
|
|
#define KSZ8873MLL_GLOBAL_CONTROL_4 0x06
|
|
#define KSZ8873MLL_GLOBAL_CONTROL_4_DUPLEX BIT(6)
|
|
#define KSZ8873MLL_GLOBAL_CONTROL_4_SPEED BIT(4)
|
|
static int ksz8873mll_read_status(struct phy_device *phydev)
|
|
{
|
|
int regval;
|
|
|
|
/* dummy read */
|
|
regval = phy_read(phydev, KSZ8873MLL_GLOBAL_CONTROL_4);
|
|
|
|
regval = phy_read(phydev, KSZ8873MLL_GLOBAL_CONTROL_4);
|
|
|
|
if (regval & KSZ8873MLL_GLOBAL_CONTROL_4_DUPLEX)
|
|
phydev->duplex = DUPLEX_HALF;
|
|
else
|
|
phydev->duplex = DUPLEX_FULL;
|
|
|
|
if (regval & KSZ8873MLL_GLOBAL_CONTROL_4_SPEED)
|
|
phydev->speed = SPEED_10;
|
|
else
|
|
phydev->speed = SPEED_100;
|
|
|
|
phydev->link = 1;
|
|
phydev->pause = phydev->asym_pause = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ksz9031_read_status(struct phy_device *phydev)
|
|
{
|
|
int err;
|
|
int regval;
|
|
|
|
err = genphy_read_status(phydev);
|
|
if (err)
|
|
return err;
|
|
|
|
/* Make sure the PHY is not broken. Read idle error count,
|
|
* and reset the PHY if it is maxed out.
|
|
*/
|
|
regval = phy_read(phydev, MII_STAT1000);
|
|
if ((regval & 0xFF) == 0xFF) {
|
|
phy_init_hw(phydev);
|
|
phydev->link = 0;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ksz8873mll_config_aneg(struct phy_device *phydev)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
/* This routine returns -1 as an indication to the caller that the
|
|
* Micrel ksz9021 10/100/1000 PHY does not support standard IEEE
|
|
* MMD extended PHY registers.
|
|
*/
|
|
static int
|
|
ksz9021_rd_mmd_phyreg(struct phy_device *phydev, int devad, u16 regnum)
|
|
{
|
|
return -1;
|
|
}
|
|
|
|
/* This routine does nothing since the Micrel ksz9021 does not support
|
|
* standard IEEE MMD extended PHY registers.
|
|
*/
|
|
static int
|
|
ksz9021_wr_mmd_phyreg(struct phy_device *phydev, int devad, u16 regnum, u16 val)
|
|
{
|
|
return -1;
|
|
}
|
|
|
|
static int kszphy_get_sset_count(struct phy_device *phydev)
|
|
{
|
|
return ARRAY_SIZE(kszphy_hw_stats);
|
|
}
|
|
|
|
static void kszphy_get_strings(struct phy_device *phydev, u8 *data)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(kszphy_hw_stats); i++) {
|
|
memcpy(data + i * ETH_GSTRING_LEN,
|
|
kszphy_hw_stats[i].string, ETH_GSTRING_LEN);
|
|
}
|
|
}
|
|
|
|
#ifndef UINT64_MAX
|
|
#define UINT64_MAX (u64)(~((u64)0))
|
|
#endif
|
|
static u64 kszphy_get_stat(struct phy_device *phydev, int i)
|
|
{
|
|
struct kszphy_hw_stat stat = kszphy_hw_stats[i];
|
|
struct kszphy_priv *priv = phydev->priv;
|
|
int val;
|
|
u64 ret;
|
|
|
|
val = phy_read(phydev, stat.reg);
|
|
if (val < 0) {
|
|
ret = UINT64_MAX;
|
|
} else {
|
|
val = val & ((1 << stat.bits) - 1);
|
|
priv->stats[i] += val;
|
|
ret = priv->stats[i];
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void kszphy_get_stats(struct phy_device *phydev,
|
|
struct ethtool_stats *stats, u64 *data)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(kszphy_hw_stats); i++)
|
|
data[i] = kszphy_get_stat(phydev, i);
|
|
}
|
|
|
|
static int kszphy_suspend(struct phy_device *phydev)
|
|
{
|
|
/* Disable PHY Interrupts */
|
|
if (phy_interrupt_is_valid(phydev)) {
|
|
phydev->interrupts = PHY_INTERRUPT_DISABLED;
|
|
if (phydev->drv->config_intr)
|
|
phydev->drv->config_intr(phydev);
|
|
}
|
|
|
|
return genphy_suspend(phydev);
|
|
}
|
|
|
|
static int kszphy_resume(struct phy_device *phydev)
|
|
{
|
|
genphy_resume(phydev);
|
|
|
|
/* Enable PHY Interrupts */
|
|
if (phy_interrupt_is_valid(phydev)) {
|
|
phydev->interrupts = PHY_INTERRUPT_ENABLED;
|
|
if (phydev->drv->config_intr)
|
|
phydev->drv->config_intr(phydev);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int kszphy_probe(struct phy_device *phydev)
|
|
{
|
|
const struct kszphy_type *type = phydev->drv->driver_data;
|
|
const struct device_node *np = phydev->mdio.dev.of_node;
|
|
struct kszphy_priv *priv;
|
|
struct clk *clk;
|
|
int ret;
|
|
|
|
priv = devm_kzalloc(&phydev->mdio.dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
phydev->priv = priv;
|
|
|
|
priv->type = type;
|
|
|
|
if (type->led_mode_reg) {
|
|
ret = of_property_read_u32(np, "micrel,led-mode",
|
|
&priv->led_mode);
|
|
if (ret)
|
|
priv->led_mode = -1;
|
|
|
|
if (priv->led_mode > 3) {
|
|
phydev_err(phydev, "invalid led mode: 0x%02x\n",
|
|
priv->led_mode);
|
|
priv->led_mode = -1;
|
|
}
|
|
} else {
|
|
priv->led_mode = -1;
|
|
}
|
|
|
|
clk = devm_clk_get(&phydev->mdio.dev, "rmii-ref");
|
|
/* NOTE: clk may be NULL if building without CONFIG_HAVE_CLK */
|
|
if (!IS_ERR_OR_NULL(clk)) {
|
|
unsigned long rate = clk_get_rate(clk);
|
|
bool rmii_ref_clk_sel_25_mhz;
|
|
|
|
priv->rmii_ref_clk_sel = type->has_rmii_ref_clk_sel;
|
|
rmii_ref_clk_sel_25_mhz = of_property_read_bool(np,
|
|
"micrel,rmii-reference-clock-select-25-mhz");
|
|
|
|
if (rate > 24500000 && rate < 25500000) {
|
|
priv->rmii_ref_clk_sel_val = rmii_ref_clk_sel_25_mhz;
|
|
} else if (rate > 49500000 && rate < 50500000) {
|
|
priv->rmii_ref_clk_sel_val = !rmii_ref_clk_sel_25_mhz;
|
|
} else {
|
|
phydev_err(phydev, "Clock rate out of range: %ld\n",
|
|
rate);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
/* Support legacy board-file configuration */
|
|
if (phydev->dev_flags & MICREL_PHY_50MHZ_CLK) {
|
|
priv->rmii_ref_clk_sel = true;
|
|
priv->rmii_ref_clk_sel_val = true;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct phy_driver ksphy_driver[] = {
|
|
{
|
|
.phy_id = PHY_ID_KS8737,
|
|
.phy_id_mask = MICREL_PHY_ID_MASK,
|
|
.name = "Micrel KS8737",
|
|
.features = PHY_BASIC_FEATURES,
|
|
.flags = PHY_HAS_INTERRUPT,
|
|
.driver_data = &ks8737_type,
|
|
.config_init = kszphy_config_init,
|
|
.config_aneg = genphy_config_aneg,
|
|
.read_status = genphy_read_status,
|
|
.ack_interrupt = kszphy_ack_interrupt,
|
|
.config_intr = kszphy_config_intr,
|
|
.suspend = genphy_suspend,
|
|
.resume = genphy_resume,
|
|
}, {
|
|
.phy_id = PHY_ID_KSZ8021,
|
|
.phy_id_mask = 0x00ffffff,
|
|
.name = "Micrel KSZ8021 or KSZ8031",
|
|
.features = PHY_BASIC_FEATURES,
|
|
.flags = PHY_HAS_INTERRUPT,
|
|
.driver_data = &ksz8021_type,
|
|
.probe = kszphy_probe,
|
|
.config_init = kszphy_config_init,
|
|
.config_aneg = genphy_config_aneg,
|
|
.read_status = genphy_read_status,
|
|
.ack_interrupt = kszphy_ack_interrupt,
|
|
.config_intr = kszphy_config_intr,
|
|
.get_sset_count = kszphy_get_sset_count,
|
|
.get_strings = kszphy_get_strings,
|
|
.get_stats = kszphy_get_stats,
|
|
.suspend = genphy_suspend,
|
|
.resume = genphy_resume,
|
|
}, {
|
|
.phy_id = PHY_ID_KSZ8031,
|
|
.phy_id_mask = 0x00ffffff,
|
|
.name = "Micrel KSZ8031",
|
|
.features = PHY_BASIC_FEATURES,
|
|
.flags = PHY_HAS_INTERRUPT,
|
|
.driver_data = &ksz8021_type,
|
|
.probe = kszphy_probe,
|
|
.config_init = kszphy_config_init,
|
|
.config_aneg = genphy_config_aneg,
|
|
.read_status = genphy_read_status,
|
|
.ack_interrupt = kszphy_ack_interrupt,
|
|
.config_intr = kszphy_config_intr,
|
|
.get_sset_count = kszphy_get_sset_count,
|
|
.get_strings = kszphy_get_strings,
|
|
.get_stats = kszphy_get_stats,
|
|
.suspend = genphy_suspend,
|
|
.resume = genphy_resume,
|
|
}, {
|
|
.phy_id = PHY_ID_KSZ8041,
|
|
.phy_id_mask = MICREL_PHY_ID_MASK,
|
|
.name = "Micrel KSZ8041",
|
|
.features = PHY_BASIC_FEATURES,
|
|
.flags = PHY_HAS_INTERRUPT,
|
|
.driver_data = &ksz8041_type,
|
|
.probe = kszphy_probe,
|
|
.config_init = ksz8041_config_init,
|
|
.config_aneg = ksz8041_config_aneg,
|
|
.read_status = genphy_read_status,
|
|
.ack_interrupt = kszphy_ack_interrupt,
|
|
.config_intr = kszphy_config_intr,
|
|
.get_sset_count = kszphy_get_sset_count,
|
|
.get_strings = kszphy_get_strings,
|
|
.get_stats = kszphy_get_stats,
|
|
.suspend = genphy_suspend,
|
|
.resume = genphy_resume,
|
|
}, {
|
|
.phy_id = PHY_ID_KSZ8041RNLI,
|
|
.phy_id_mask = MICREL_PHY_ID_MASK,
|
|
.name = "Micrel KSZ8041RNLI",
|
|
.features = PHY_BASIC_FEATURES,
|
|
.flags = PHY_HAS_INTERRUPT,
|
|
.driver_data = &ksz8041_type,
|
|
.probe = kszphy_probe,
|
|
.config_init = kszphy_config_init,
|
|
.config_aneg = genphy_config_aneg,
|
|
.read_status = genphy_read_status,
|
|
.ack_interrupt = kszphy_ack_interrupt,
|
|
.config_intr = kszphy_config_intr,
|
|
.get_sset_count = kszphy_get_sset_count,
|
|
.get_strings = kszphy_get_strings,
|
|
.get_stats = kszphy_get_stats,
|
|
.suspend = genphy_suspend,
|
|
.resume = genphy_resume,
|
|
}, {
|
|
.phy_id = PHY_ID_KSZ8051,
|
|
.phy_id_mask = MICREL_PHY_ID_MASK,
|
|
.name = "Micrel KSZ8051",
|
|
.features = PHY_BASIC_FEATURES,
|
|
.flags = PHY_HAS_INTERRUPT,
|
|
.driver_data = &ksz8051_type,
|
|
.probe = kszphy_probe,
|
|
.config_init = kszphy_config_init,
|
|
.config_aneg = genphy_config_aneg,
|
|
.read_status = genphy_read_status,
|
|
.ack_interrupt = kszphy_ack_interrupt,
|
|
.config_intr = kszphy_config_intr,
|
|
.get_sset_count = kszphy_get_sset_count,
|
|
.get_strings = kszphy_get_strings,
|
|
.get_stats = kszphy_get_stats,
|
|
.suspend = genphy_suspend,
|
|
.resume = genphy_resume,
|
|
}, {
|
|
.phy_id = PHY_ID_KSZ8001,
|
|
.name = "Micrel KSZ8001 or KS8721",
|
|
.phy_id_mask = 0x00fffffc,
|
|
.features = PHY_BASIC_FEATURES,
|
|
.flags = PHY_HAS_INTERRUPT,
|
|
.driver_data = &ksz8041_type,
|
|
.probe = kszphy_probe,
|
|
.config_init = kszphy_config_init,
|
|
.config_aneg = genphy_config_aneg,
|
|
.read_status = genphy_read_status,
|
|
.ack_interrupt = kszphy_ack_interrupt,
|
|
.config_intr = kszphy_config_intr,
|
|
.get_sset_count = kszphy_get_sset_count,
|
|
.get_strings = kszphy_get_strings,
|
|
.get_stats = kszphy_get_stats,
|
|
.suspend = genphy_suspend,
|
|
.resume = genphy_resume,
|
|
}, {
|
|
.phy_id = PHY_ID_KSZ8081,
|
|
.name = "Micrel KSZ8081 or KSZ8091",
|
|
.phy_id_mask = MICREL_PHY_ID_MASK,
|
|
.features = PHY_BASIC_FEATURES,
|
|
.flags = PHY_HAS_INTERRUPT,
|
|
.driver_data = &ksz8081_type,
|
|
.probe = kszphy_probe,
|
|
.config_init = kszphy_config_init,
|
|
.config_aneg = genphy_config_aneg,
|
|
.read_status = genphy_read_status,
|
|
.ack_interrupt = kszphy_ack_interrupt,
|
|
.config_intr = kszphy_config_intr,
|
|
.get_sset_count = kszphy_get_sset_count,
|
|
.get_strings = kszphy_get_strings,
|
|
.get_stats = kszphy_get_stats,
|
|
.suspend = kszphy_suspend,
|
|
.resume = kszphy_resume,
|
|
}, {
|
|
.phy_id = PHY_ID_KSZ8061,
|
|
.name = "Micrel KSZ8061",
|
|
.phy_id_mask = MICREL_PHY_ID_MASK,
|
|
.features = PHY_BASIC_FEATURES,
|
|
.flags = PHY_HAS_INTERRUPT,
|
|
.config_init = kszphy_config_init,
|
|
.config_aneg = genphy_config_aneg,
|
|
.read_status = genphy_read_status,
|
|
.ack_interrupt = kszphy_ack_interrupt,
|
|
.config_intr = kszphy_config_intr,
|
|
.suspend = genphy_suspend,
|
|
.resume = genphy_resume,
|
|
}, {
|
|
.phy_id = PHY_ID_KSZ9021,
|
|
.phy_id_mask = 0x000ffffe,
|
|
.name = "Micrel KSZ9021 Gigabit PHY",
|
|
.features = PHY_GBIT_FEATURES,
|
|
.flags = PHY_HAS_INTERRUPT,
|
|
.driver_data = &ksz9021_type,
|
|
.probe = kszphy_probe,
|
|
.config_init = ksz9021_config_init,
|
|
.config_aneg = genphy_config_aneg,
|
|
.read_status = genphy_read_status,
|
|
.ack_interrupt = kszphy_ack_interrupt,
|
|
.config_intr = kszphy_config_intr,
|
|
.get_sset_count = kszphy_get_sset_count,
|
|
.get_strings = kszphy_get_strings,
|
|
.get_stats = kszphy_get_stats,
|
|
.suspend = genphy_suspend,
|
|
.resume = genphy_resume,
|
|
.read_mmd = ksz9021_rd_mmd_phyreg,
|
|
.write_mmd = ksz9021_wr_mmd_phyreg,
|
|
}, {
|
|
.phy_id = PHY_ID_KSZ9031,
|
|
.phy_id_mask = MICREL_PHY_ID_MASK,
|
|
.name = "Micrel KSZ9031 Gigabit PHY",
|
|
.features = PHY_GBIT_FEATURES,
|
|
.flags = PHY_HAS_INTERRUPT,
|
|
.driver_data = &ksz9021_type,
|
|
.probe = kszphy_probe,
|
|
.config_init = ksz9031_config_init,
|
|
.config_aneg = genphy_config_aneg,
|
|
.read_status = ksz9031_read_status,
|
|
.ack_interrupt = kszphy_ack_interrupt,
|
|
.config_intr = kszphy_config_intr,
|
|
.get_sset_count = kszphy_get_sset_count,
|
|
.get_strings = kszphy_get_strings,
|
|
.get_stats = kszphy_get_stats,
|
|
.suspend = genphy_suspend,
|
|
.resume = kszphy_resume,
|
|
}, {
|
|
.phy_id = PHY_ID_KSZ8873MLL,
|
|
.phy_id_mask = MICREL_PHY_ID_MASK,
|
|
.name = "Micrel KSZ8873MLL Switch",
|
|
.config_init = kszphy_config_init,
|
|
.config_aneg = ksz8873mll_config_aneg,
|
|
.read_status = ksz8873mll_read_status,
|
|
.suspend = genphy_suspend,
|
|
.resume = genphy_resume,
|
|
}, {
|
|
.phy_id = PHY_ID_KSZ886X,
|
|
.phy_id_mask = MICREL_PHY_ID_MASK,
|
|
.name = "Micrel KSZ886X Switch",
|
|
.features = PHY_BASIC_FEATURES,
|
|
.flags = PHY_HAS_INTERRUPT,
|
|
.config_init = kszphy_config_init,
|
|
.config_aneg = genphy_config_aneg,
|
|
.read_status = genphy_read_status,
|
|
.suspend = genphy_suspend,
|
|
.resume = genphy_resume,
|
|
}, {
|
|
.phy_id = PHY_ID_KSZ8795,
|
|
.phy_id_mask = MICREL_PHY_ID_MASK,
|
|
.name = "Micrel KSZ8795",
|
|
.features = PHY_BASIC_FEATURES,
|
|
.flags = PHY_HAS_INTERRUPT,
|
|
.config_init = kszphy_config_init,
|
|
.config_aneg = ksz8873mll_config_aneg,
|
|
.read_status = ksz8873mll_read_status,
|
|
.suspend = genphy_suspend,
|
|
.resume = genphy_resume,
|
|
}, {
|
|
.phy_id = PHY_ID_KSZ9477,
|
|
.phy_id_mask = MICREL_PHY_ID_MASK,
|
|
.name = "Microchip KSZ9477",
|
|
.features = PHY_GBIT_FEATURES,
|
|
.config_init = kszphy_config_init,
|
|
.config_aneg = genphy_config_aneg,
|
|
.read_status = genphy_read_status,
|
|
.suspend = genphy_suspend,
|
|
.resume = genphy_resume,
|
|
} };
|
|
|
|
module_phy_driver(ksphy_driver);
|
|
|
|
MODULE_DESCRIPTION("Micrel PHY driver");
|
|
MODULE_AUTHOR("David J. Choi");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
static struct mdio_device_id __maybe_unused micrel_tbl[] = {
|
|
{ PHY_ID_KSZ9021, 0x000ffffe },
|
|
{ PHY_ID_KSZ9031, MICREL_PHY_ID_MASK },
|
|
{ PHY_ID_KSZ8001, 0x00fffffc },
|
|
{ PHY_ID_KS8737, MICREL_PHY_ID_MASK },
|
|
{ PHY_ID_KSZ8021, 0x00ffffff },
|
|
{ PHY_ID_KSZ8031, 0x00ffffff },
|
|
{ PHY_ID_KSZ8041, MICREL_PHY_ID_MASK },
|
|
{ PHY_ID_KSZ8051, MICREL_PHY_ID_MASK },
|
|
{ PHY_ID_KSZ8061, MICREL_PHY_ID_MASK },
|
|
{ PHY_ID_KSZ8081, MICREL_PHY_ID_MASK },
|
|
{ PHY_ID_KSZ8873MLL, MICREL_PHY_ID_MASK },
|
|
{ PHY_ID_KSZ886X, MICREL_PHY_ID_MASK },
|
|
{ }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(mdio, micrel_tbl);
|