![Sergei Shtylyov](/assets/img/avatar_default.png)
Add missing PSC #define's required for the drivers using PSC on DBAu1550 board (also fixing Au1550 PSC3 address) and all Au1200-based boards as well. Make the OSS driver use the correct PSC definitions fo each board. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
223 lines
6.3 KiB
C
223 lines
6.3 KiB
C
/*
|
|
* AMD Alchemy DB1x00 Reference Boards
|
|
*
|
|
* Copyright 2001 MontaVista Software Inc.
|
|
* Author: MontaVista Software, Inc.
|
|
* ppopov@mvista.com or source@mvista.com
|
|
* Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
|
|
*
|
|
* ########################################################################
|
|
*
|
|
* This program is free software; you can distribute it and/or modify it
|
|
* under the terms of the GNU General Public License (Version 2) as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
|
* for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along
|
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
|
|
*
|
|
* ########################################################################
|
|
*
|
|
*
|
|
*/
|
|
#ifndef __ASM_DB1X00_H
|
|
#define __ASM_DB1X00_H
|
|
|
|
|
|
#ifdef CONFIG_MIPS_DB1550
|
|
|
|
#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
|
|
#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
|
|
#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC3_TX
|
|
#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC3_RX
|
|
|
|
#define SPI_PSC_BASE PSC0_BASE_ADDR
|
|
#define AC97_PSC_BASE PSC1_BASE_ADDR
|
|
#define SMBUS_PSC_BASE PSC2_BASE_ADDR
|
|
#define I2S_PSC_BASE PSC3_BASE_ADDR
|
|
|
|
#define BCSR_KSEG1_ADDR 0xAF000000
|
|
#define NAND_PHYS_ADDR 0x20000000
|
|
|
|
#else
|
|
#define BCSR_KSEG1_ADDR 0xAE000000
|
|
#endif
|
|
|
|
/*
|
|
* Overlay data structure of the Db1x00 board registers.
|
|
* Registers located at physical 0E0000xx, KSEG1 0xAE0000xx
|
|
*/
|
|
typedef volatile struct
|
|
{
|
|
/*00*/ unsigned short whoami;
|
|
unsigned short reserved0;
|
|
/*04*/ unsigned short status;
|
|
unsigned short reserved1;
|
|
/*08*/ unsigned short switches;
|
|
unsigned short reserved2;
|
|
/*0C*/ unsigned short resets;
|
|
unsigned short reserved3;
|
|
/*10*/ unsigned short pcmcia;
|
|
unsigned short reserved4;
|
|
/*14*/ unsigned short specific;
|
|
unsigned short reserved5;
|
|
/*18*/ unsigned short leds;
|
|
unsigned short reserved6;
|
|
/*1C*/ unsigned short swreset;
|
|
unsigned short reserved7;
|
|
|
|
} BCSR;
|
|
|
|
|
|
/*
|
|
* Register/mask bit definitions for the BCSRs
|
|
*/
|
|
#define BCSR_WHOAMI_DCID 0x000F
|
|
#define BCSR_WHOAMI_CPLD 0x00F0
|
|
#define BCSR_WHOAMI_BOARD 0x0F00
|
|
|
|
#define BCSR_STATUS_PC0VS 0x0003
|
|
#define BCSR_STATUS_PC1VS 0x000C
|
|
#define BCSR_STATUS_PC0FI 0x0010
|
|
#define BCSR_STATUS_PC1FI 0x0020
|
|
#define BCSR_STATUS_FLASHBUSY 0x0100
|
|
#define BCSR_STATUS_ROMBUSY 0x0400
|
|
#define BCSR_STATUS_SWAPBOOT 0x2000
|
|
#define BCSR_STATUS_FLASHDEN 0xC000
|
|
|
|
#define BCSR_SWITCHES_DIP 0x00FF
|
|
#define BCSR_SWITCHES_DIP_1 0x0080
|
|
#define BCSR_SWITCHES_DIP_2 0x0040
|
|
#define BCSR_SWITCHES_DIP_3 0x0020
|
|
#define BCSR_SWITCHES_DIP_4 0x0010
|
|
#define BCSR_SWITCHES_DIP_5 0x0008
|
|
#define BCSR_SWITCHES_DIP_6 0x0004
|
|
#define BCSR_SWITCHES_DIP_7 0x0002
|
|
#define BCSR_SWITCHES_DIP_8 0x0001
|
|
#define BCSR_SWITCHES_ROTARY 0x0F00
|
|
|
|
#define BCSR_RESETS_PHY0 0x0001
|
|
#define BCSR_RESETS_PHY1 0x0002
|
|
#define BCSR_RESETS_DC 0x0004
|
|
#define BCSR_RESETS_FIR_SEL 0x2000
|
|
#define BCSR_RESETS_IRDA_MODE_MASK 0xC000
|
|
#define BCSR_RESETS_IRDA_MODE_FULL 0x0000
|
|
#define BCSR_RESETS_IRDA_MODE_OFF 0x4000
|
|
#define BCSR_RESETS_IRDA_MODE_2_3 0x8000
|
|
#define BCSR_RESETS_IRDA_MODE_1_3 0xC000
|
|
|
|
#define BCSR_PCMCIA_PC0VPP 0x0003
|
|
#define BCSR_PCMCIA_PC0VCC 0x000C
|
|
#define BCSR_PCMCIA_PC0DRVEN 0x0010
|
|
#define BCSR_PCMCIA_PC0RST 0x0080
|
|
#define BCSR_PCMCIA_PC1VPP 0x0300
|
|
#define BCSR_PCMCIA_PC1VCC 0x0C00
|
|
#define BCSR_PCMCIA_PC1DRVEN 0x1000
|
|
#define BCSR_PCMCIA_PC1RST 0x8000
|
|
|
|
#define BCSR_BOARD_PCIM66EN 0x0001
|
|
#define BCSR_BOARD_SD0_PWR 0x0040
|
|
#define BCSR_BOARD_SD1_PWR 0x0080
|
|
#define BCSR_BOARD_PCIM33 0x0100
|
|
#define BCSR_BOARD_GPIO200RST 0x0400
|
|
#define BCSR_BOARD_PCICFG 0x1000
|
|
#define BCSR_BOARD_SD0_WP 0x4000
|
|
#define BCSR_BOARD_SD1_WP 0x8000
|
|
|
|
#define BCSR_LEDS_DECIMALS 0x0003
|
|
#define BCSR_LEDS_LED0 0x0100
|
|
#define BCSR_LEDS_LED1 0x0200
|
|
#define BCSR_LEDS_LED2 0x0400
|
|
#define BCSR_LEDS_LED3 0x0800
|
|
|
|
#define BCSR_SWRESET_RESET 0x0080
|
|
|
|
/* PCMCIA Db1x00 specific defines */
|
|
#define PCMCIA_MAX_SOCK 1
|
|
#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1)
|
|
|
|
/* VPP/VCC */
|
|
#define SET_VCC_VPP(VCC, VPP, SLOT)\
|
|
((((VCC)<<2) | ((VPP)<<0)) << ((SLOT)*8))
|
|
|
|
/* SD controller macros */
|
|
/*
|
|
* Detect card.
|
|
*/
|
|
#define mmc_card_inserted(_n_, _res_) \
|
|
do { \
|
|
BCSR * const bcsr = (BCSR *)0xAE000000; \
|
|
unsigned long mmc_wp, board_specific; \
|
|
if ((_n_)) { \
|
|
mmc_wp = BCSR_BOARD_SD1_WP; \
|
|
} else { \
|
|
mmc_wp = BCSR_BOARD_SD0_WP; \
|
|
} \
|
|
board_specific = au_readl((unsigned long)(&bcsr->specific)); \
|
|
if (!(board_specific & mmc_wp)) {/* low means card present */ \
|
|
*(int *)(_res_) = 1; \
|
|
} else { \
|
|
*(int *)(_res_) = 0; \
|
|
} \
|
|
} while (0)
|
|
|
|
/*
|
|
* Apply power to card slot(s).
|
|
*/
|
|
#define mmc_power_on(_n_) \
|
|
do { \
|
|
BCSR * const bcsr = (BCSR *)0xAE000000; \
|
|
unsigned long mmc_pwr, mmc_wp, board_specific; \
|
|
if ((_n_)) { \
|
|
mmc_pwr = BCSR_BOARD_SD1_PWR; \
|
|
mmc_wp = BCSR_BOARD_SD1_WP; \
|
|
} else { \
|
|
mmc_pwr = BCSR_BOARD_SD0_PWR; \
|
|
mmc_wp = BCSR_BOARD_SD0_WP; \
|
|
} \
|
|
board_specific = au_readl((unsigned long)(&bcsr->specific)); \
|
|
if (!(board_specific & mmc_wp)) {/* low means card present */ \
|
|
board_specific |= mmc_pwr; \
|
|
au_writel(board_specific, (int)(&bcsr->specific)); \
|
|
au_sync(); \
|
|
} \
|
|
} while (0)
|
|
|
|
|
|
/* NAND defines */
|
|
/* Timing values as described in databook, * ns value stripped of
|
|
* lower 2 bits.
|
|
* These defines are here rather than an SOC1550 generic file because
|
|
* the parts chosen on another board may be different and may require
|
|
* different timings.
|
|
*/
|
|
#define NAND_T_H (18 >> 2)
|
|
#define NAND_T_PUL (30 >> 2)
|
|
#define NAND_T_SU (30 >> 2)
|
|
#define NAND_T_WH (30 >> 2)
|
|
|
|
/* Bitfield shift amounts */
|
|
#define NAND_T_H_SHIFT 0
|
|
#define NAND_T_PUL_SHIFT 4
|
|
#define NAND_T_SU_SHIFT 8
|
|
#define NAND_T_WH_SHIFT 12
|
|
|
|
#define NAND_TIMING ((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \
|
|
((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \
|
|
((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \
|
|
((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT)
|
|
#define NAND_CS 1
|
|
|
|
/* should be done by yamon */
|
|
#define NAND_STCFG 0x00400005 /* 8-bit NAND */
|
|
#define NAND_STTIME 0x00007774 /* valid for 396MHz SD=2 only */
|
|
#define NAND_STADDR 0x12000FFF /* physical address 0x20000000 */
|
|
|
|
#endif /* __ASM_DB1X00_H */
|
|
|