alistair23-linux/drivers/usb
Alan Stern feca7746d5 USB: EHCI: don't check DMA values in QH overlays
This patch (as1661) fixes a rather obscure bug in ehci-hcd.  In a
couple of places, the driver compares the DMA address stored in a QH's
overlay region with the address of a particular qTD, in order to see
whether that qTD is the one currently being processed by the hardware.
(If it is then the status in the QH's overlay region is more
up-to-date than the status in the qTD, and if it isn't then the
overlay's value needs to be adjusted when the QH is added back to the
active schedule.)

However, DMA address in the overlay region isn't always valid.  It
sometimes will contain a stale value, which may happen by coincidence
to be equal to a qTD's DMA address.  Instead of checking the DMA
address, we should check whether the overlay region is active and
valid.  The patch tests the ACTIVE bit in the overlay, and clears this
bit when the overlay becomes invalid (which happens when the
currently-executing URB is unlinked).

This is the second part of a fix for the regression reported at:

	https://bugs.launchpad.net/bugs/1088733

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Joseph Salisbury <joseph.salisbury@canonical.com>
Reported-and-tested-by: Stephen Thirlwall <sdt@dr.com>
CC: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-05 08:45:33 +08:00
..
atm
c67x00
chipidea usb: chipidea: register debugging sysfs on our device 2013-03-04 09:33:25 +02:00
class Merge 3.8-rc5 into tty-next 2013-01-25 13:27:36 -08:00
core Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs 2013-02-26 20:16:07 -08:00
dwc3 usb: dwc3: gadget: remove unnecessary code 2013-03-04 09:33:25 +02:00
early
gadget usb: gadget: u_uac1: NULL dereference on error path 2013-03-04 13:16:45 +02:00
host USB: EHCI: don't check DMA values in QH overlays 2013-03-05 08:45:33 +08:00
image
misc USB: altsetting overrides for usbtest 2013-01-31 10:09:19 +01:00
mon
musb usb: musb: correct Kconfig in order to avoid non compilable selection 2013-03-04 09:33:30 +02:00
otg usb: otg: use try_module_get in all usb_get_phy functions and add missing module_put 2013-03-04 09:33:30 +02:00
phy usb: phy: omap-control-usb: Convert to devm_ioremap_resource() 2013-03-04 13:08:53 +02:00
renesas_usbhs USB patches for 3.9-rc1 2013-02-21 12:20:00 -08:00
serial tty/serial patches for 3.9-rc1 2013-02-21 13:41:04 -08:00
storage USB: usb-storage: unusual_devs update for Super TOP SATA bridge 2013-02-14 09:22:02 -08:00
wusbcore USB: wusbcore/wa-xfer: error handling fixes in setup_segs() 2013-02-06 11:38:14 -08:00
Kconfig
Makefile
README
usb-common.c
usb-skeleton.c

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.