From 632f83d56a68f79d462eb7f8663ba894f06b3572 Mon Sep 17 00:00:00 2001 From: ddvk Date: Wed, 21 Oct 2020 21:19:12 +0200 Subject: [PATCH] more info --- README.md | 2 ++ 1 file changed, 2 insertions(+) diff --git a/README.md b/README.md index c8389ae..0d760ee 100644 --- a/README.md +++ b/README.md @@ -10,6 +10,7 @@ To put the rM2 in recovery, you will need: - Pogo pin adapter to usb the pogo pins are as follows, when viewed from the side, device facing up (VBUS is near the usb-c) `GND,ID,D+,D-,VBUS` + - [imx_usb_loader](https://github.com/boundarydevices/imx_usb_loader) a binary is included, but feel free to compile it @@ -23,6 +24,7 @@ To put the rM2 in recovery, you will need: * connect the USB-C breakout board * pull down **B8** (connect a 10K resistor to GND) * connect the pogo pins to the tablet and to the host usb +* **make sure the connection is good, use a short good, different cable, etc** * if the device does not start on its own, press the Power Button * you should see a new device *USB HID v1.10 Device [Freescale SemiConductor Inc SE Blank ULT1]* * remove the pulldown resistor (disconnect B8)