redonkable
/
freescale-linux-fslc
1
0
Fork 0
Code Releases Activity

gpio/driver.rst: document gpiochip_disable/enable_irq() 

Document these new functions.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
4.20.x+fslc
Hans Verkuil 2018-09-08 11:23:18 +02:00 committed by Linus Walleij
parent 461c1a7d47
commit 4f8183ae70
1 changed files with 22 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

23
Documentation/driver-api/gpio/driver.rst
View File

@ -374,7 +374,28 @@ When implementing an irqchip inside a GPIO driver, these two functions should
typically be called in the .startup() and .shutdown() callbacks from the
irqchip.
When using the gpiolib irqchip helpers, these callback are automatically
When using the gpiolib irqchip helpers, these callbacks are automatically
assigned.
Disabling and enabling IRQs
---------------------------
When a GPIO is used as an IRQ signal, then gpiolib also needs to know if
the IRQ is enabled or disabled. In order to inform gpiolib about this,
a driver should call::
void gpiochip_disable_irq(struct gpio_chip *chip, unsigned int offset)
This allows drivers to drive the GPIO as an output while the IRQ is
disabled. When the IRQ is enabled again, a driver should call::
void gpiochip_enable_irq(struct gpio_chip *chip, unsigned int offset)
When implementing an irqchip inside a GPIO driver, these two functions should
typically be called in the .irq_disable() and .irq_enable() callbacks from the
irqchip.
When using the gpiolib irqchip helpers, these callbacks are automatically
assigned.
Real-Time compliance for GPIO IRQ chips