hwmon: (ltc2978) Add support for LTM4675
LTM2975 is a dual 9A or single 18A μModule regulator. It is register compatible with LTM4676. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This commit is contained in:
parent
e04d1ce9bb
commit
ccf2dc51bc
|
@ -47,6 +47,10 @@ Supported chips:
|
|||
Prefix: 'ltm2987'
|
||||
Addresses scanned: -
|
||||
Datasheet: http://www.linear.com/product/ltm2987
|
||||
* Linear Technology LTM4675
|
||||
Prefix: 'ltm4675'
|
||||
Addresses scanned: -
|
||||
Datasheet: http://www.linear.com/product/ltm4675
|
||||
* Linear Technology LTM4676
|
||||
Prefix: 'ltm4676'
|
||||
Addresses scanned: -
|
||||
|
@ -70,6 +74,7 @@ LTC3883 is a single phase step-down DC/DC controller.
|
|||
LTM2987 is a 16-channel Power System Manager with two LTC2977 plus
|
||||
additional components on a single die. The chip is instantiated and reported
|
||||
as two separate chips on two different I2C bus addresses.
|
||||
LTM4675 is a dual 9A or single 18A μModule regulator
|
||||
LTM4676 is a dual 13A or single 26A uModule regulator.
|
||||
|
||||
|
||||
|
@ -117,7 +122,8 @@ in[N]_label "vout[1-8]".
|
|||
LTC2974, LTC2975: N=2-5
|
||||
LTC2977, LTC2980, LTM2987: N=2-9
|
||||
LTC2978: N=2-9
|
||||
LTC3880, LTC3882, LTC23886 LTC3887, LTM4676: N=2-3
|
||||
LTC3880, LTC3882, LTC23886 LTC3887, LTM4675, LTM4676:
|
||||
N=2-3
|
||||
LTC3883: N=2
|
||||
in[N]_input Measured output voltage.
|
||||
in[N]_min Minimum output voltage.
|
||||
|
@ -139,9 +145,9 @@ temp[N]_input Measured temperature.
|
|||
On LTC2977, LTC2980, LTC2978, and LTM2987, only one
|
||||
temperature measurement is supported and reports
|
||||
the chip temperature.
|
||||
On LTC3880, LTC3882, LTC3887, and LTM4676, temp1 and
|
||||
temp2 report external temperatures, and temp3 reports
|
||||
the chip temperature.
|
||||
On LTC3880, LTC3882, LTC3887, LTM4675, and LTM4676,
|
||||
temp1 and temp2 report external temperatures, and temp3
|
||||
reports the chip temperature.
|
||||
On LTC3883, temp1 reports an external temperature,
|
||||
and temp2 reports the chip temperature.
|
||||
temp[N]_min Mimimum temperature. LTC2974, LCT2977, LTM2980, LTC2978,
|
||||
|
@ -172,12 +178,13 @@ power[N]_label "pout[1-4]".
|
|||
LTC2974, LTC2975: N=1-4
|
||||
LTC2977, LTC2980, LTM2987: Not supported
|
||||
LTC2978: Not supported
|
||||
LTC3880, LTC3882, LTC3886, LTC3887, LTM4676: N=1-2
|
||||
LTC3880, LTC3882, LTC3886, LTC3887, LTM4675, LTM4676:
|
||||
N=1-2
|
||||
LTC3883: N=2
|
||||
power[N]_input Measured output power.
|
||||
|
||||
curr1_label "iin". LTC3880, LTC3883, LTC3886, LTC3887, and LTM4676
|
||||
only.
|
||||
curr1_label "iin". LTC3880, LTC3883, LTC3886, LTC3887, LTM4675,
|
||||
and LTM4676 only.
|
||||
curr1_input Measured input current.
|
||||
curr1_max Maximum input current.
|
||||
curr1_max_alarm Input current high alarm.
|
||||
|
@ -188,7 +195,8 @@ curr[N]_label "iout[1-4]".
|
|||
LTC2974, LTC2975: N=1-4
|
||||
LTC2977, LTC2980, LTM2987: not supported
|
||||
LTC2978: not supported
|
||||
LTC3880, LTC3882, LTC3886, LTC3887, LTM4676: N=2-3
|
||||
LTC3880, LTC3882, LTC3886, LTC3887, LTM4675, LTM4676:
|
||||
N=2-3
|
||||
LTC3883: N=2
|
||||
curr[N]_input Measured output current.
|
||||
curr[N]_max Maximum output current.
|
||||
|
|
|
@ -53,7 +53,7 @@ config SENSORS_LTC2978
|
|||
help
|
||||
If you say yes here you get hardware monitoring support for Linear
|
||||
Technology LTC2974, LTC2975, LTC2977, LTC2978, LTC2980, LTC3880,
|
||||
LTC3883, LTC3886, LTC3887, LTCM2987, and LTM4676.
|
||||
LTC3883, LTC3886, LTC3887, LTCM2987, LTM4675, and LTM4676.
|
||||
|
||||
This driver can also be built as a module. If so, the module will
|
||||
be called ltc2978.
|
||||
|
|
|
@ -28,7 +28,7 @@
|
|||
#include "pmbus.h"
|
||||
|
||||
enum chips { ltc2974, ltc2975, ltc2977, ltc2978, ltc2980, ltc3880, ltc3882,
|
||||
ltc3883, ltc3886, ltc3887, ltm2987, ltm4676 };
|
||||
ltc3883, ltc3886, ltc3887, ltm2987, ltm4675, ltm4676 };
|
||||
|
||||
/* Common for all chips */
|
||||
#define LTC2978_MFR_VOUT_PEAK 0xdd
|
||||
|
@ -46,7 +46,7 @@ enum chips { ltc2974, ltc2975, ltc2977, ltc2978, ltc2980, ltc3880, ltc3882,
|
|||
#define LTC2974_MFR_IOUT_PEAK 0xd7
|
||||
#define LTC2974_MFR_IOUT_MIN 0xd8
|
||||
|
||||
/* LTC3880, LTC3882, LTC3883, LTC3887, and LTM4676 */
|
||||
/* LTC3880, LTC3882, LTC3883, LTC3887, LTM4675, and LTM4676 */
|
||||
#define LTC3880_MFR_IOUT_PEAK 0xd7
|
||||
#define LTC3880_MFR_CLEAR_PEAKS 0xe3
|
||||
#define LTC3880_MFR_TEMPERATURE2_PEAK 0xf4
|
||||
|
@ -77,6 +77,7 @@ enum chips { ltc2974, ltc2975, ltc2977, ltc2978, ltc2980, ltc3880, ltc3882,
|
|||
#define LTC3887_ID 0x4700
|
||||
#define LTM2987_ID_A 0x8010 /* A/B for two die IDs */
|
||||
#define LTM2987_ID_B 0x8020
|
||||
#define LTM4675_ID 0x47a0
|
||||
#define LTM4676_ID_REV1 0x4400
|
||||
#define LTM4676_ID_REV2 0x4480
|
||||
#define LTM4676A_ID 0x47e0
|
||||
|
@ -509,6 +510,7 @@ static const struct i2c_device_id ltc2978_id[] = {
|
|||
{"ltc3886", ltc3886},
|
||||
{"ltc3887", ltc3887},
|
||||
{"ltm2987", ltm2987},
|
||||
{"ltm4675", ltm4675},
|
||||
{"ltm4676", ltm4676},
|
||||
{}
|
||||
};
|
||||
|
@ -581,6 +583,8 @@ static int ltc2978_get_id(struct i2c_client *client)
|
|||
return ltc3887;
|
||||
else if (chip_id == LTM2987_ID_A || chip_id == LTM2987_ID_B)
|
||||
return ltm2987;
|
||||
else if (chip_id == LTM4675_ID)
|
||||
return ltm4675;
|
||||
else if (chip_id == LTM4676_ID_REV1 || chip_id == LTM4676_ID_REV2 ||
|
||||
chip_id == LTM4676A_ID)
|
||||
return ltm4676;
|
||||
|
@ -678,6 +682,7 @@ static int ltc2978_probe(struct i2c_client *client,
|
|||
break;
|
||||
case ltc3880:
|
||||
case ltc3887:
|
||||
case ltm4675:
|
||||
case ltm4676:
|
||||
data->features |= FEAT_CLEAR_PEAKS | FEAT_NEEDS_POLLING;
|
||||
info->read_word_data = ltc3880_read_word_data;
|
||||
|
@ -763,6 +768,7 @@ static const struct of_device_id ltc2978_of_match[] = {
|
|||
{ .compatible = "lltc,ltc3886" },
|
||||
{ .compatible = "lltc,ltc3887" },
|
||||
{ .compatible = "lltc,ltm2987" },
|
||||
{ .compatible = "lltc,ltm4675" },
|
||||
{ .compatible = "lltc,ltm4676" },
|
||||
{ }
|
||||
};
|
||||
|
|
Loading…
Reference in a new issue