diff --git a/arch/m68k/Kconfig.bus b/arch/m68k/Kconfig.bus
index d5e66ec136db..aef698fa50e5 100644
--- a/arch/m68k/Kconfig.bus
+++ b/arch/m68k/Kconfig.bus
@@ -59,6 +59,10 @@ config ATARI_ROM_ISA
 config GENERIC_ISA_DMA
 	def_bool ISA
 
+source "drivers/zorro/Kconfig"
+
+endif
+
 config PCI
 	bool "PCI support"
 	depends on M54xx
@@ -66,10 +70,8 @@ config PCI
 	  Enable the PCI bus. Support for the PCI bus hardware built into the
 	  ColdFire 547x and 548x processors.
 
+if PCI
 source "drivers/pci/Kconfig"
-
-source "drivers/zorro/Kconfig"
-
 endif
 
 if !MMU
diff --git a/arch/m68k/coldfire/pci.c b/arch/m68k/coldfire/pci.c
index 3097fa2ca746..62b0eb6cf69a 100644
--- a/arch/m68k/coldfire/pci.c
+++ b/arch/m68k/coldfire/pci.c
@@ -23,20 +23,10 @@
 
 /*
  * Memory and IO mappings. We use a 1:1 mapping for local host memory to
- * PCI bus memory (no reason not to really). IO space doesn't matter, we
- * always use access functions for that. The device configuration space is
- * mapped over the IO map space when we enable it in the PCICAR register.
+ * PCI bus memory (no reason not to really). IO space is mapped in its own
+ * separate address region. The device configuration space is mapped over
+ * the IO map space when we enable it in the PCICAR register.
  */
-#define	PCI_MEM_PA	0xf0000000		/* Host physical address */
-#define	PCI_MEM_BA	0xf0000000		/* Bus physical address */
-#define	PCI_MEM_SIZE	0x08000000		/* 128 MB */
-#define	PCI_MEM_MASK	(PCI_MEM_SIZE - 1)
-
-#define	PCI_IO_PA	0xf8000000		/* Host physical address */
-#define	PCI_IO_BA	0x00000000		/* Bus physical address */
-#define	PCI_IO_SIZE	0x00010000		/* 64k */
-#define	PCI_IO_MASK	(PCI_IO_SIZE - 1)
-
 static struct pci_bus *rootbus;
 static unsigned long iospace;
 
@@ -56,13 +46,6 @@ static unsigned char mcf_host_irq[] = {
 	0, 69, 69, 71, 71,
 };
 
-
-static inline void syncio(void)
-{
-	/* The ColdFire "nop" instruction waits for all bus IO to complete */
-	__asm__ __volatile__ ("nop");
-}
-
 /*
  * Configuration space access functions. Configuration space access is
  * through the IO mapping window, enabling it via the PCICAR register.
@@ -84,9 +67,9 @@ static int mcf_pci_readconfig(struct pci_bus *bus, unsigned int devfn,
 			return PCIBIOS_SUCCESSFUL;
 	}
 
-	syncio();
 	addr = mcf_mk_pcicar(bus->number, devfn, where);
 	__raw_writel(PCICAR_E | addr, PCICAR);
+	__raw_readl(PCICAR);
 	addr = iospace + (where & 0x3);
 
 	switch (size) {
@@ -101,8 +84,8 @@ static int mcf_pci_readconfig(struct pci_bus *bus, unsigned int devfn,
 		break;
 	}
 
-	syncio();
 	__raw_writel(0, PCICAR);
+	__raw_readl(PCICAR);
 	return PCIBIOS_SUCCESSFUL;
 }
 
@@ -116,9 +99,9 @@ static int mcf_pci_writeconfig(struct pci_bus *bus, unsigned int devfn,
 			return PCIBIOS_SUCCESSFUL;
 	}
 
-	syncio();
 	addr = mcf_mk_pcicar(bus->number, devfn, where);
 	__raw_writel(PCICAR_E | addr, PCICAR);
+	__raw_readl(PCICAR);
 	addr = iospace + (where & 0x3);
 
 	switch (size) {
@@ -133,8 +116,8 @@ static int mcf_pci_writeconfig(struct pci_bus *bus, unsigned int devfn,
 		break;
 	}
 
-	syncio();
 	__raw_writel(0, PCICAR);
+	__raw_readl(PCICAR);
 	return PCIBIOS_SUCCESSFUL;
 }
 
@@ -143,89 +126,6 @@ static struct pci_ops mcf_pci_ops = {
 	.write	= mcf_pci_writeconfig,
 };
 
-/*
- *	IO address space access functions. Pretty strait forward, these are
- *	directly mapped in to the IO mapping window. And that is mapped into
- *	virtual address space.
- */
-u8 mcf_pci_inb(u32 addr)
-{
-	return __raw_readb(iospace + (addr & PCI_IO_MASK));
-}
-EXPORT_SYMBOL(mcf_pci_inb);
-
-u16 mcf_pci_inw(u32 addr)
-{
-	return le16_to_cpu(__raw_readw(iospace + (addr & PCI_IO_MASK)));
-}
-EXPORT_SYMBOL(mcf_pci_inw);
-
-u32 mcf_pci_inl(u32 addr)
-{
-	return le32_to_cpu(__raw_readl(iospace + (addr & PCI_IO_MASK)));
-}
-EXPORT_SYMBOL(mcf_pci_inl);
-
-void mcf_pci_insb(u32 addr, u8 *buf, u32 len)
-{
-	for (; len; len--)
-		*buf++ = mcf_pci_inb(addr);
-}
-EXPORT_SYMBOL(mcf_pci_insb);
-
-void mcf_pci_insw(u32 addr, u16 *buf, u32 len)
-{
-	for (; len; len--)
-		*buf++ = mcf_pci_inw(addr);
-}
-EXPORT_SYMBOL(mcf_pci_insw);
-
-void mcf_pci_insl(u32 addr, u32 *buf, u32 len)
-{
-	for (; len; len--)
-		*buf++ = mcf_pci_inl(addr);
-}
-EXPORT_SYMBOL(mcf_pci_insl);
-
-void mcf_pci_outb(u8 v, u32 addr)
-{
-	__raw_writeb(v, iospace + (addr & PCI_IO_MASK));
-}
-EXPORT_SYMBOL(mcf_pci_outb);
-
-void mcf_pci_outw(u16 v, u32 addr)
-{
-	__raw_writew(cpu_to_le16(v), iospace + (addr & PCI_IO_MASK));
-}
-EXPORT_SYMBOL(mcf_pci_outw);
-
-void mcf_pci_outl(u32 v, u32 addr)
-{
-	__raw_writel(cpu_to_le32(v), iospace + (addr & PCI_IO_MASK));
-}
-EXPORT_SYMBOL(mcf_pci_outl);
-
-void mcf_pci_outsb(u32 addr, const u8 *buf, u32 len)
-{
-	for (; len; len--)
-		mcf_pci_outb(*buf++, addr);
-}
-EXPORT_SYMBOL(mcf_pci_outsb);
-
-void mcf_pci_outsw(u32 addr, const u16 *buf, u32 len)
-{
-	for (; len; len--)
-		mcf_pci_outw(*buf++, addr);
-}
-EXPORT_SYMBOL(mcf_pci_outsw);
-
-void mcf_pci_outsl(u32 addr, const u32 *buf, u32 len)
-{
-	for (; len; len--)
-		mcf_pci_outl(*buf++, addr);
-}
-EXPORT_SYMBOL(mcf_pci_outsl);
-
 /*
  * Initialize the PCI bus registers, and scan the bus.
  */
diff --git a/arch/m68k/include/asm/atarihw.h b/arch/m68k/include/asm/atarihw.h
index 972c8f33f055..9000b249d225 100644
--- a/arch/m68k/include/asm/atarihw.h
+++ b/arch/m68k/include/asm/atarihw.h
@@ -23,6 +23,7 @@
 #include <linux/types.h>
 #include <asm/bootinfo-atari.h>
 #include <asm/raw_io.h>
+#include <asm/kmap.h>
 
 extern u_long atari_mch_cookie;
 extern u_long atari_mch_type;
diff --git a/arch/m68k/include/asm/io.h b/arch/m68k/include/asm/io.h
index 756089cc019c..ca2849afb087 100644
--- a/arch/m68k/include/asm/io.h
+++ b/arch/m68k/include/asm/io.h
@@ -1,14 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0 */
-#ifdef __uClinux__
+#if defined(__uClinux__) || defined(CONFIG_COLDFIRE)
 #include <asm/io_no.h>
 #else
 #include <asm/io_mm.h>
 #endif
-
-#define readb_relaxed(addr)	readb(addr)
-#define readw_relaxed(addr)	readw(addr)
-#define readl_relaxed(addr)	readl(addr)
-
-#define writeb_relaxed(b, addr)	writeb(b, addr)
-#define writew_relaxed(b, addr)	writew(b, addr)
-#define writel_relaxed(b, addr)	writel(b, addr)
diff --git a/arch/m68k/include/asm/io_mm.h b/arch/m68k/include/asm/io_mm.h
index ed5333e87879..fe485f4f5fac 100644
--- a/arch/m68k/include/asm/io_mm.h
+++ b/arch/m68k/include/asm/io_mm.h
@@ -26,6 +26,7 @@
 #include <linux/compiler.h>
 #include <asm/raw_io.h>
 #include <asm/virtconvert.h>
+#include <asm/kmap.h>
 
 #include <asm-generic/iomap.h>
 
@@ -85,53 +86,7 @@
 #endif /* ATARI_ROM_ISA */
 
 
-#if defined(CONFIG_PCI) && defined(CONFIG_COLDFIRE)
-
-#define HAVE_ARCH_PIO_SIZE
-#define PIO_OFFSET	0
-#define PIO_MASK	0xffff
-#define PIO_RESERVED	0x10000
-
-u8 mcf_pci_inb(u32 addr);
-u16 mcf_pci_inw(u32 addr);
-u32 mcf_pci_inl(u32 addr);
-void mcf_pci_insb(u32 addr, u8 *buf, u32 len);
-void mcf_pci_insw(u32 addr, u16 *buf, u32 len);
-void mcf_pci_insl(u32 addr, u32 *buf, u32 len);
-
-void mcf_pci_outb(u8 v, u32 addr);
-void mcf_pci_outw(u16 v, u32 addr);
-void mcf_pci_outl(u32 v, u32 addr);
-void mcf_pci_outsb(u32 addr, const u8 *buf, u32 len);
-void mcf_pci_outsw(u32 addr, const u16 *buf, u32 len);
-void mcf_pci_outsl(u32 addr, const u32 *buf, u32 len);
-
-#define	inb	mcf_pci_inb
-#define	inb_p	mcf_pci_inb
-#define	inw	mcf_pci_inw
-#define	inw_p	mcf_pci_inw
-#define	inl	mcf_pci_inl
-#define	inl_p	mcf_pci_inl
-#define	insb	mcf_pci_insb
-#define	insw	mcf_pci_insw
-#define	insl	mcf_pci_insl
-
-#define	outb	mcf_pci_outb
-#define	outb_p	mcf_pci_outb
-#define	outw	mcf_pci_outw
-#define	outw_p	mcf_pci_outw
-#define	outl	mcf_pci_outl
-#define	outl_p	mcf_pci_outl
-#define	outsb	mcf_pci_outsb
-#define	outsw	mcf_pci_outsw
-#define	outsl	mcf_pci_outsl
-
-#define readb(addr)	in_8(addr)
-#define writeb(v, addr)	out_8((addr), (v))
-#define readw(addr)	in_le16(addr)
-#define writew(v, addr)	out_le16((addr), (v))
-
-#elif defined(CONFIG_ISA) || defined(CONFIG_ATARI_ROM_ISA)
+#if defined(CONFIG_ISA) || defined(CONFIG_ATARI_ROM_ISA)
 
 #if MULTI_ISA == 0
 #undef MULTI_ISA
@@ -414,8 +369,7 @@ static inline void isa_delay(void)
 #define writew(val, addr)	out_le16((addr), (val))
 #endif /* CONFIG_ATARI_ROM_ISA */
 
-#if !defined(CONFIG_ISA) && !defined(CONFIG_ATARI_ROM_ISA) && \
-    !(defined(CONFIG_PCI) && defined(CONFIG_COLDFIRE))
+#if !defined(CONFIG_ISA) && !defined(CONFIG_ATARI_ROM_ISA)
 /*
  * We need to define dummy functions for GENERIC_IOMAP support.
  */
@@ -461,39 +415,6 @@ static inline void isa_delay(void)
 
 #define mmiowb()
 
-static inline void __iomem *ioremap(unsigned long physaddr, unsigned long size)
-{
-	return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
-}
-static inline void __iomem *ioremap_nocache(unsigned long physaddr, unsigned long size)
-{
-	return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
-}
-#define ioremap_uc ioremap_nocache
-static inline void __iomem *ioremap_wt(unsigned long physaddr,
-					 unsigned long size)
-{
-	return __ioremap(physaddr, size, IOMAP_WRITETHROUGH);
-}
-static inline void __iomem *ioremap_fullcache(unsigned long physaddr,
-				      unsigned long size)
-{
-	return __ioremap(physaddr, size, IOMAP_FULL_CACHING);
-}
-
-static inline void memset_io(volatile void __iomem *addr, unsigned char val, int count)
-{
-	__builtin_memset((void __force *) addr, val, count);
-}
-static inline void memcpy_fromio(void *dst, const volatile void __iomem *src, int count)
-{
-	__builtin_memcpy(dst, (void __force *) src, count);
-}
-static inline void memcpy_toio(volatile void __iomem *dst, const void *src, int count)
-{
-	__builtin_memcpy((void __force *) dst, src, count);
-}
-
 #ifndef CONFIG_SUN3
 #define IO_SPACE_LIMIT 0xffff
 #else
@@ -515,13 +436,12 @@ static inline void memcpy_toio(volatile void __iomem *dst, const void *src, int
  */
 #define xlate_dev_kmem_ptr(p)	p
 
-static inline void __iomem *ioport_map(unsigned long port, unsigned int nr)
-{
-	return (void __iomem *) port;
-}
+#define readb_relaxed(addr)	readb(addr)
+#define readw_relaxed(addr)	readw(addr)
+#define readl_relaxed(addr)	readl(addr)
 
-static inline void ioport_unmap(void __iomem *p)
-{
-}
+#define writeb_relaxed(b, addr)	writeb(b, addr)
+#define writew_relaxed(b, addr)	writew(b, addr)
+#define writel_relaxed(b, addr)	writel(b, addr)
 
 #endif /* _IO_H */
diff --git a/arch/m68k/include/asm/io_no.h b/arch/m68k/include/asm/io_no.h
index 86f45b403bcc..83a0a6d449f4 100644
--- a/arch/m68k/include/asm/io_no.h
+++ b/arch/m68k/include/asm/io_no.h
@@ -2,191 +2,148 @@
 #ifndef _M68KNOMMU_IO_H
 #define _M68KNOMMU_IO_H
 
-#ifdef __KERNEL__
-
-#define ARCH_HAS_IOREMAP_WT
-
-#include <asm/virtconvert.h>
-#include <asm-generic/iomap.h>
+/*
+ * Convert a physical memory address into a IO memory address.
+ * For us this is trivially a type cast.
+ */
+#define iomem(a)	((void __iomem *) (a))
 
 /*
- * These are for ISA/PCI shared memory _only_ and should never be used
- * on any other type of memory, including Zorro memory. They are meant to
- * access the bus in the bus byte order which is little-endian!.
- *
- * readX/writeX() are used to access memory mapped devices. On some
- * architectures the memory mapped IO stuff needs to be accessed
- * differently. On the m68k architecture, we just read/write the
- * memory location directly.
+ * The non-MMU m68k and ColdFire IO and memory mapped hardware access
+ * functions have always worked in CPU native endian. We need to define
+ * that behavior here first before we include asm-generic/io.h.
  */
-/* ++roman: The assignments to temp. vars avoid that gcc sometimes generates
- * two accesses to memory, which may be undesirable for some devices.
- */
-
-/*
- * swap functions are sometimes needed to interface little-endian hardware
- */
-static inline unsigned short _swapw(volatile unsigned short v)
-{
-    return ((v << 8) | (v >> 8));
-}
-
-static inline unsigned int _swapl(volatile unsigned long v)
-{
-    return ((v << 24) | ((v & 0xff00) << 8) | ((v & 0xff0000) >> 8) | (v >> 24));
-}
-
-#define readb(addr) \
+#define __raw_readb(addr) \
     ({ unsigned char __v = (*(volatile unsigned char *) (addr)); __v; })
-#define readw(addr) \
+#define __raw_readw(addr) \
     ({ unsigned short __v = (*(volatile unsigned short *) (addr)); __v; })
-#define readl(addr) \
+#define __raw_readl(addr) \
     ({ unsigned int __v = (*(volatile unsigned int *) (addr)); __v; })
 
-#define writeb(b,addr) (void)((*(volatile unsigned char *) (addr)) = (b))
-#define writew(b,addr) (void)((*(volatile unsigned short *) (addr)) = (b))
-#define writel(b,addr) (void)((*(volatile unsigned int *) (addr)) = (b))
+#define __raw_writeb(b, addr) (void)((*(volatile unsigned char *) (addr)) = (b))
+#define __raw_writew(b, addr) (void)((*(volatile unsigned short *) (addr)) = (b))
+#define __raw_writel(b, addr) (void)((*(volatile unsigned int *) (addr)) = (b))
 
-#define __raw_readb readb
-#define __raw_readw readw
-#define __raw_readl readl
-#define __raw_writeb writeb
-#define __raw_writew writew
-#define __raw_writel writel
+#if defined(CONFIG_COLDFIRE)
+/*
+ * For ColdFire platforms we may need to do some extra checks for what
+ * type of address range we are accessing. Include the ColdFire platform
+ * definitions so we can figure out if need to do something special.
+ */
+#include <asm/byteorder.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#endif /* CONFIG_COLDFIRE */
 
-static inline void io_outsb(unsigned int addr, const void *buf, int len)
+#if defined(IOMEMBASE)
+/*
+ * The ColdFire SoC internal peripherals are mapped into virtual address
+ * space using the ACR registers of the cache control unit. This means we
+ * are using a 1:1 physical:virtual mapping for them. We can quickly
+ * determine if we are accessing an internal peripheral device given the
+ * physical or vitrual address using the same range check. This check logic
+ * applies just the same of there is no MMU but something like a PCI bus
+ * is present.
+ */
+static int __cf_internalio(unsigned long addr)
 {
-	volatile unsigned char *ap = (volatile unsigned char *) addr;
-	unsigned char *bp = (unsigned char *) buf;
-	while (len--)
-		*ap = *bp++;
+	return (addr >= IOMEMBASE) && (addr <= IOMEMBASE + IOMEMSIZE - 1);
 }
 
-static inline void io_outsw(unsigned int addr, const void *buf, int len)
+static int cf_internalio(const volatile void __iomem *addr)
 {
-	volatile unsigned short *ap = (volatile unsigned short *) addr;
-	unsigned short *bp = (unsigned short *) buf;
-	while (len--)
-		*ap = _swapw(*bp++);
+	return __cf_internalio((unsigned long) addr);
 }
 
-static inline void io_outsl(unsigned int addr, const void *buf, int len)
-{
-	volatile unsigned int *ap = (volatile unsigned int *) addr;
-	unsigned int *bp = (unsigned int *) buf;
-	while (len--)
-		*ap = _swapl(*bp++);
-}
-
-static inline void io_insb(unsigned int addr, void *buf, int len)
-{
-	volatile unsigned char *ap = (volatile unsigned char *) addr;
-	unsigned char *bp = (unsigned char *) buf;
-	while (len--)
-		*bp++ = *ap;
-}
-
-static inline void io_insw(unsigned int addr, void *buf, int len)
-{
-	volatile unsigned short *ap = (volatile unsigned short *) addr;
-	unsigned short *bp = (unsigned short *) buf;
-	while (len--)
-		*bp++ = _swapw(*ap);
-}
-
-static inline void io_insl(unsigned int addr, void *buf, int len)
-{
-	volatile unsigned int *ap = (volatile unsigned int *) addr;
-	unsigned int *bp = (unsigned int *) buf;
-	while (len--)
-		*bp++ = _swapl(*ap);
-}
-
-#define mmiowb()
-
 /*
- *	make the short names macros so specific devices
- *	can override them as required
+ * We need to treat built-in peripherals and bus based address ranges
+ * differently. Local built-in peripherals (and the ColdFire SoC parts
+ * have quite a lot of them) are always native endian - which is big
+ * endian on m68k/ColdFire. Bus based address ranges, like the PCI bus,
+ * are accessed little endian - so we need to byte swap those.
  */
-
-#define memset_io(a,b,c)	memset((void *)(a),(b),(c))
-#define memcpy_fromio(a,b,c)	memcpy((a),(void *)(b),(c))
-#define memcpy_toio(a,b,c)	memcpy((void *)(a),(b),(c))
-
-#define inb(addr)    readb(addr)
-#define inw(addr)    readw(addr)
-#define inl(addr)    readl(addr)
-#define outb(x,addr) ((void) writeb(x,addr))
-#define outw(x,addr) ((void) writew(x,addr))
-#define outl(x,addr) ((void) writel(x,addr))
-
-#define inb_p(addr)    inb(addr)
-#define inw_p(addr)    inw(addr)
-#define inl_p(addr)    inl(addr)
-#define outb_p(x,addr) outb(x,addr)
-#define outw_p(x,addr) outw(x,addr)
-#define outl_p(x,addr) outl(x,addr)
-
-#define outsb(a,b,l) io_outsb(a,b,l)
-#define outsw(a,b,l) io_outsw(a,b,l)
-#define outsl(a,b,l) io_outsl(a,b,l)
-
-#define insb(a,b,l) io_insb(a,b,l)
-#define insw(a,b,l) io_insw(a,b,l)
-#define insl(a,b,l) io_insl(a,b,l)
-
-#define IO_SPACE_LIMIT 0xffffffff
-
-
-/* Values for nocacheflag and cmode */
-#define IOMAP_FULL_CACHING		0
-#define IOMAP_NOCACHE_SER		1
-#define IOMAP_NOCACHE_NONSER		2
-#define IOMAP_WRITETHROUGH		3
-
-static inline void *__ioremap(unsigned long physaddr, unsigned long size, int cacheflag)
+#define readw readw
+static inline u16 readw(const volatile void __iomem *addr)
 {
-	return (void *) physaddr;
-}
-static inline void *ioremap(unsigned long physaddr, unsigned long size)
-{
-	return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
-}
-static inline void *ioremap_nocache(unsigned long physaddr, unsigned long size)
-{
-	return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
-}
-static inline void *ioremap_wt(unsigned long physaddr, unsigned long size)
-{
-	return __ioremap(physaddr, size, IOMAP_WRITETHROUGH);
-}
-static inline void *ioremap_fullcache(unsigned long physaddr, unsigned long size)
-{
-	return __ioremap(physaddr, size, IOMAP_FULL_CACHING);
+	if (cf_internalio(addr))
+		return __raw_readw(addr);
+	return __le16_to_cpu(__raw_readw(addr));
 }
 
-#define	iounmap(addr)	do { } while(0)
+#define readl readl
+static inline u32 readl(const volatile void __iomem *addr)
+{
+	if (cf_internalio(addr))
+		return __raw_readl(addr);
+	return __le32_to_cpu(__raw_readl(addr));
+}
+
+#define writew writew
+static inline void writew(u16 value, volatile void __iomem *addr)
+{
+	if (cf_internalio(addr))
+		__raw_writew(value, addr);
+	else
+		__raw_writew(__cpu_to_le16(value), addr);
+}
+
+#define writel writel
+static inline void writel(u32 value, volatile void __iomem *addr)
+{
+	if (cf_internalio(addr))
+		__raw_writel(value, addr);
+	else
+		__raw_writel(__cpu_to_le32(value), addr);
+}
+
+#else
+
+#define readb __raw_readb
+#define readw __raw_readw
+#define readl __raw_readl
+#define writeb __raw_writeb
+#define writew __raw_writew
+#define writel __raw_writel
+
+#endif /* IOMEMBASE */
+
+#if defined(CONFIG_PCI)
+/*
+ * Support for PCI bus access uses the asm-generic access functions.
+ * We need to supply the base address and masks for the normal memory
+ * and IO address space mappings.
+ */
+#define PCI_MEM_PA	0xf0000000		/* Host physical address */
+#define PCI_MEM_BA	0xf0000000		/* Bus physical address */
+#define PCI_MEM_SIZE	0x08000000		/* 128 MB */
+#define PCI_MEM_MASK	(PCI_MEM_SIZE - 1)
+
+#define PCI_IO_PA	0xf8000000		/* Host physical address */
+#define PCI_IO_BA	0x00000000		/* Bus physical address */
+#define PCI_IO_SIZE	0x00010000		/* 64k */
+#define PCI_IO_MASK	(PCI_IO_SIZE - 1)
+
+#define HAVE_ARCH_PIO_SIZE
+#define PIO_OFFSET	0
+#define PIO_MASK	0xffff
+#define PIO_RESERVED	0x10000
+#define PCI_IOBASE	((void __iomem *) PCI_IO_PA)
+#define PCI_SPACE_LIMIT	PCI_IO_MASK
+#endif /* CONFIG_PCI */
 
 /*
- * Convert a physical pointer to a virtual kernel pointer for /dev/mem
- * access
+ * These are defined in kmap.h as static inline functions. To maintain
+ * previous behavior we put these define guards here so io_mm.h doesn't
+ * see them.
  */
-#define xlate_dev_mem_ptr(p)	__va(p)
+#ifdef CONFIG_MMU
+#define memset_io memset_io
+#define memcpy_fromio memcpy_fromio
+#define memcpy_toio memcpy_toio
+#endif
 
-/*
- * Convert a virtual cached pointer to an uncached pointer
- */
-#define xlate_dev_kmem_ptr(p)	p
-
-static inline void __iomem *ioport_map(unsigned long port, unsigned int nr)
-{
-	return (void __iomem *) port;
-}
-
-static inline void ioport_unmap(void __iomem *p)
-{
-}
-
-#endif /* __KERNEL__ */
+#include <asm/kmap.h>
+#include <asm/virtconvert.h>
+#include <asm-generic/io.h>
 
 #endif /* _M68KNOMMU_IO_H */
diff --git a/arch/m68k/include/asm/kmap.h b/arch/m68k/include/asm/kmap.h
new file mode 100644
index 000000000000..84b8333db8ad
--- /dev/null
+++ b/arch/m68k/include/asm/kmap.h
@@ -0,0 +1,80 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _KMAP_H
+#define _KMAP_H
+
+#ifdef CONFIG_MMU
+
+/* Values for nocacheflag and cmode */
+#define IOMAP_FULL_CACHING		0
+#define IOMAP_NOCACHE_SER		1
+#define IOMAP_NOCACHE_NONSER		2
+#define IOMAP_WRITETHROUGH		3
+
+/*
+ * These functions exported by arch/m68k/mm/kmap.c.
+ * Only needed on MMU enabled systems.
+ */
+extern void __iomem *__ioremap(unsigned long physaddr, unsigned long size,
+			       int cacheflag);
+extern void iounmap(void __iomem *addr);
+extern void __iounmap(void *addr, unsigned long size);
+
+#define ioremap ioremap
+static inline void __iomem *ioremap(unsigned long physaddr, unsigned long size)
+{
+	return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
+}
+
+#define ioremap_nocache ioremap_nocache
+static inline void __iomem *ioremap_nocache(unsigned long physaddr,
+					    unsigned long size)
+{
+	return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
+}
+
+#define ioremap_uc ioremap_nocache
+static inline void __iomem *ioremap_wt(unsigned long physaddr,
+				       unsigned long size)
+{
+	return __ioremap(physaddr, size, IOMAP_WRITETHROUGH);
+}
+
+#define ioremap_fillcache ioremap_fullcache
+static inline void __iomem *ioremap_fullcache(unsigned long physaddr,
+					      unsigned long size)
+{
+	return __ioremap(physaddr, size, IOMAP_FULL_CACHING);
+}
+
+static inline void memset_io(volatile void __iomem *addr, unsigned char val,
+			     int count)
+{
+	__builtin_memset((void __force *) addr, val, count);
+}
+
+static inline void memcpy_fromio(void *dst, const volatile void __iomem *src,
+				 int count)
+{
+	__builtin_memcpy(dst, (void __force *) src, count);
+}
+
+static inline void memcpy_toio(volatile void __iomem *dst, const void *src,
+			       int count)
+{
+	__builtin_memcpy((void __force *) dst, src, count);
+}
+
+#endif /* CONFIG_MMU */
+
+#define ioport_map ioport_map
+static inline void __iomem *ioport_map(unsigned long port, unsigned int nr)
+{
+	return (void __iomem *) port;
+}
+
+#define ioport_unmap ioport_unmap
+static inline void ioport_unmap(void __iomem *p)
+{
+}
+
+#endif /* _KMAP_H */
diff --git a/arch/m68k/include/asm/nubus.h b/arch/m68k/include/asm/nubus.h
index d0d2039e434e..c2281da6c51a 100644
--- a/arch/m68k/include/asm/nubus.h
+++ b/arch/m68k/include/asm/nubus.h
@@ -3,6 +3,7 @@
 #define _ASM_M68K_NUBUS_H
 
 #include <asm/raw_io.h>
+#include <asm/kmap.h>
 
 #define nubus_readb raw_inb
 #define nubus_readw raw_inw
diff --git a/arch/m68k/include/asm/q40_master.h b/arch/m68k/include/asm/q40_master.h
index 3a89c088800c..9b00fb8079e6 100644
--- a/arch/m68k/include/asm/q40_master.h
+++ b/arch/m68k/include/asm/q40_master.h
@@ -8,7 +8,7 @@
 #define _Q40_MASTER_H
 
 #include <asm/raw_io.h>
-
+#include <asm/kmap.h>
 
 #define q40_master_addr 0xff000000
 
diff --git a/arch/m68k/include/asm/raw_io.h b/arch/m68k/include/asm/raw_io.h
index 05e940c29b54..85761255dde5 100644
--- a/arch/m68k/include/asm/raw_io.h
+++ b/arch/m68k/include/asm/raw_io.h
@@ -13,20 +13,6 @@
 
 #include <asm/byteorder.h>
 
-
-/* Values for nocacheflag and cmode */
-#define IOMAP_FULL_CACHING		0
-#define IOMAP_NOCACHE_SER		1
-#define IOMAP_NOCACHE_NONSER		2
-#define IOMAP_WRITETHROUGH		3
-
-extern void iounmap(void __iomem *addr);
-
-extern void __iomem *__ioremap(unsigned long physaddr, unsigned long size,
-		       int cacheflag);
-extern void __iounmap(void *addr, unsigned long size);
-
-
 /* ++roman: The assignments to temp. vars avoid that gcc sometimes generates
  * two accesses to memory, which may be undesirable for some devices.
  */
diff --git a/arch/m68k/include/asm/vga.h b/arch/m68k/include/asm/vga.h
index 010a624d1b39..4742e6bc3ab8 100644
--- a/arch/m68k/include/asm/vga.h
+++ b/arch/m68k/include/asm/vga.h
@@ -2,7 +2,15 @@
 #ifndef _ASM_M68K_VGA_H
 #define _ASM_M68K_VGA_H
 
+/*
+ * Some ColdFire platforms do in fact have a PCI bus. So for those we want
+ * to use the real IO access functions, don't fake them out or redirect them
+ * for that case.
+ */
+#ifndef CONFIG_PCI
+
 #include <asm/raw_io.h>
+#include <asm/kmap.h>
 
 /*
  * FIXME
@@ -25,4 +33,5 @@
 #define writeb			raw_outb
 #define writew			raw_outw
 
+#endif /* CONFIG_PCI */
 #endif /* _ASM_M68K_VGA_H */
diff --git a/arch/m68k/include/asm/virtconvert.h b/arch/m68k/include/asm/virtconvert.h
index 4aea6be7b220..dfe43083b579 100644
--- a/arch/m68k/include/asm/virtconvert.h
+++ b/arch/m68k/include/asm/virtconvert.h
@@ -16,11 +16,13 @@
 /*
  * Change virtual addresses to physical addresses and vv.
  */
+#define virt_to_phys virt_to_phys
 static inline unsigned long virt_to_phys(void *address)
 {
 	return __pa(address);
 }
 
+#define phys_to_virt phys_to_virt
 static inline void *phys_to_virt(unsigned long address)
 {
 	return __va(address);
diff --git a/arch/m68k/include/asm/zorro.h b/arch/m68k/include/asm/zorro.h
index 96f64bf7bcaa..60fc4b6f294d 100644
--- a/arch/m68k/include/asm/zorro.h
+++ b/arch/m68k/include/asm/zorro.h
@@ -3,6 +3,7 @@
 #define _ASM_M68K_ZORRO_H
 
 #include <asm/raw_io.h>
+#include <asm/kmap.h>
 
 #define z_readb raw_inb
 #define z_readw raw_inw
diff --git a/arch/m68k/mm/kmap.c b/arch/m68k/mm/kmap.c
index 3b420f6d8822..40a3b327da07 100644
--- a/arch/m68k/mm/kmap.c
+++ b/arch/m68k/mm/kmap.c
@@ -126,6 +126,10 @@ void __iomem *__ioremap(unsigned long physaddr, unsigned long size, int cachefla
 			return (void __iomem *)physaddr;
 	}
 #endif
+#ifdef CONFIG_COLDFIRE
+	if (__cf_internalio(physaddr))
+		return (void __iomem *) physaddr;
+#endif
 
 #ifdef DEBUG
 	printk("ioremap: 0x%lx,0x%lx(%d) - ", physaddr, size, cacheflag);
@@ -236,6 +240,10 @@ void iounmap(void __iomem *addr)
 	     ((unsigned long)addr > 0x60000000)))
 			free_io_area((__force void *)addr);
 #else
+#ifdef CONFIG_COLDFIRE
+	if (cf_internalio(addr))
+		return;
+#endif
 	free_io_area((__force void *)addr);
 #endif
 }