redonkable/freescale-linux-fslc
redonkable/freescale-linux-fslc
1
0
Fork 0
Code Releases Activity

spi/bcm63xx-hsspi: add support for dual spi read/write

Browse source 
Add support for dual read/writes on spi-bcm63xx-hsspi. This has been
tested with a s25fl129p1 dual read capable spi flash, with a nice speed
improvement:

serial read:

root@OpenWrt:/# time dd if=/dev/mtd4 of=/dev/null bs=8192
2032+0 records in
2032+0 records out
real    0m 4.39s
user    0m 0.00s
sys     0m 1.55s

dual read:

root@OpenWrt:/# time dd if=/dev/mtd4 of=/dev/null bs=8192
2032+0 records in
2032+0 records out
real    0m 3.09s
user    0m 0.00s
sys     0m 1.56s

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Jonas Gorski 2015-08-23 22:49:32 +02:00 committed by Mark Brown
parent bc0195aad0
commit f4d8622377
1 changed files with 9 additions and 4 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

13
drivers/spi/spi-bcm63xx-hsspi.c
View file

@ -76,6 +76,7 @@
#define HSSPI_FIFO_REG(x) (0x200 + (x) * 0x200)
#define HSSPI_OP_MULTIBIT BIT(11)
#define HSSPI_OP_CODE_SHIFT 13
#define HSSPI_OP_SLEEP (0 << HSSPI_OP_CODE_SHIFT)
#define HSSPI_OP_READ_WRITE (1 << HSSPI_OP_CODE_SHIFT)
@ -171,9 +172,12 @@ static int bcm63xx_hsspi_do_txrx(struct spi_device *spi, struct spi_transfer *t)
if (opcode != HSSPI_OP_READ)
step_size -= HSSPI_OPCODE_LEN;
__raw_writel(0 << MODE_CTRL_PREPENDBYTE_CNT_SHIFT |
2 << MODE_CTRL_MULTIDATA_WR_STRT_SHIFT |
2 << MODE_CTRL_MULTIDATA_RD_STRT_SHIFT | 0xff,
if ((opcode == HSSPI_OP_READ && t->rx_nbits == SPI_NBITS_DUAL) ||
(opcode == HSSPI_OP_WRITE && t->tx_nbits == SPI_NBITS_DUAL))
opcode |= HSSPI_OP_MULTIBIT;
__raw_writel(1 << MODE_CTRL_MULTIDATA_WR_SIZE_SHIFT |
1 << MODE_CTRL_MULTIDATA_RD_SIZE_SHIFT | 0xff,
bs->regs + HSSPI_PROFILE_MODE_CTRL_REG(chip_select));
while (pending > 0) {
@ -374,7 +378,8 @@ static int bcm63xx_hsspi_probe(struct platform_device *pdev)
master->num_chipselect = 8;
master->setup = bcm63xx_hsspi_setup;
master->transfer_one_message = bcm63xx_hsspi_transfer_one;
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH |
SPI_RX_DUAL | SPI_TX_DUAL;
master->bits_per_word_mask = SPI_BPW_MASK(8);
master->auto_runtime_pm = true;