commit 7b279bbfd2 upstream.
Smatch complains about missing that the ovl_override_creds() doesn't
have a matching revert_creds() if the dentry is disconnected. Fix this
by moving the ovl_override_creds() until after the disconnected check.
Fixes: aa3ff3c152 ("ovl: copy up of disconnected dentries")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d1f8280887 upstream.
Read and write operations are capped to MAX_RW_COUNT. Some read ops rely on
that limit, and that is not guaranteed by the IORING_OP_PROVIDE_BUFFERS.
Truncate those lengths when doing io_add_buffers, so buffer addresses still
use the uncapped length.
Also, take the chance and change struct io_buffer len member to __u32, so
it matches struct io_provide_buffer len member.
This fixes CVE-2021-3491, also reported as ZDI-CAN-13546.
Fixes: ddf0322db7 ("io_uring: add IORING_OP_PROVIDE_BUFFERS")
Reported-by: Billy Jheng Bing-Jhong (@st424204)
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5899593f51 upstream.
Eric has noticed that after pagecache read rework, generic/418 is
occasionally failing for ext4 when blocksize < pagesize. In fact, the
pagecache rework just made hard to hit race in ext4 more likely. The
problem is that since ext4 conversion of direct IO writes to iomap
framework (commit 378f32bab3), we update inode size after direct IO
write only after invalidating page cache. Thus if buffered read sneaks
at unfortunate moment like:
CPU1 - write at offset 1k CPU2 - read from offset 0
iomap_dio_rw(..., IOMAP_DIO_FORCE_WAIT);
ext4_readpage();
ext4_handle_inode_extension()
the read will zero out tail of the page as it still sees smaller inode
size and thus page cache becomes inconsistent with on-disk contents with
all the consequences.
Fix the problem by moving inode size update into end_io handler which
gets called before the page cache is invalidated.
Reported-and-tested-by: Eric Whitney <enwlinux@gmail.com>
Fixes: 378f32bab3 ("ext4: introduce direct I/O write using iomap infrastructure")
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Acked-by: Dave Chinner <dchinner@redhat.com>
Link: https://lore.kernel.org/r/20210415155417.4734-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4811d9929c upstream.
This is needed to allow generic/607 to pass for file systems with the
inline data_feature enabled, and it allows the use of file systems
where the directories use inline_data, while the files are accessed
via DAX.
Cc: stable@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6810fad956 upstream.
Fix As write_mmp_block() so that it returns -EIO instead of 1, so that
the correct error gets saved into the superblock.
Cc: stable@kernel.org
Fixes: 54d3adbc29 ("ext4: save all error info in save_error_info() and drop ext4_set_errno()")
Reported-by: Liu Zhi Qiang <liuzhiqiang26@huawei.com>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/20210406025331.148343-1-yebin10@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 72ffb49a7b upstream.
When CONFIG_QUOTA is enabled, if we failed to mount the filesystem due
to some error happens behind ext4_orphan_cleanup(), it will end up
triggering a after free issue of super_block. The problem is that
ext4_orphan_cleanup() will set SB_ACTIVE flag if CONFIG_QUOTA is
enabled, after we cleanup the truncated inodes, the last iput() will put
them into the lru list, and these inodes' pages may probably dirty and
will be write back by the writeback thread, so it could be raced by
freeing super_block in the error path of mount_bdev().
After check the setting of SB_ACTIVE flag in ext4_orphan_cleanup(), it
was used to ensure updating the quota file properly, but evict inode and
trash data immediately in the last iput does not affect the quotafile,
so setting the SB_ACTIVE flag seems not required[1]. Fix this issue by
just remove the SB_ACTIVE setting.
[1] https://lore.kernel.org/linux-ext4/99cce8ca-e4a0-7301-840f-2ace67c551f3@huawei.com/T/#m04990cfbc4f44592421736b504afcc346b2a7c00
Cc: stable@kernel.org
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Tested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210331033138.918975-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a149d2a5ca upstream.
Commit <50122847007> ("ext4: fix check to prevent initializing reserved
inodes") check the block group zero and prevent initializing reserved
inodes. But in some special cases, the reserved inode may not all belong
to the group zero, it may exist into the second group if we format
filesystem below.
mkfs.ext4 -b 4096 -g 8192 -N 1024 -I 4096 /dev/sda
So, it will end up triggering a false positive report of a corrupted
file system. This patch fix it by avoid check reserved inodes if no free
inode blocks will be zeroed.
Cc: stable@kernel.org
Fixes: 5012284700 ("ext4: fix check to prevent initializing reserved inodes")
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Suggested-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210331121516.2243099-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 83fe6b18b8 upstream.
Assertion checks in jbd2_journal_dirty_metadata() are known to be racy
but we don't want to be grabbing locks just for them. We thus recheck
them under b_state_lock only if it looks like they would fail. Annotate
the checks with data_race().
Cc: stable@kernel.org
Reported-by: Hao Sun <sunhao.th@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210406161804.20150-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9c2dc11df5 upstream.
We were ignoring CAP_MULTI_CHANNEL in the server response - if the
server doesn't support multichannel we should not be attempting it.
See MS-SMB2 section 3.2.5.2
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-By: Tom Talpey <tom@talpey.com>
Cc: <stable@vger.kernel.org> # v5.8+
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 679971e721 upstream.
In the SMB3/SMB3.1.1 negotiate protocol request, we are supposed to
advertise CAP_MULTICHANNEL capability when establishing multiple
channels has been requested by the user doing the mount. See MS-SMB2
sections 2.2.3 and 3.2.5.2
Without setting it there is some risk that multichannel could fail
if the server interpreted the field strictly.
Reviewed-By: Tom Talpey <tom@talpey.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Cc: <stable@vger.kernel.org> # v5.8+
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 77edfc6e51 upstream.
If mounted with discard option, exFAT issues discard command when clear
cluster bit to remove file. But the input parameter of cluster-to-sector
calculation is abnormally added by reserved cluster size which is 2,
leading to discard unrelated sectors included in target+2 cluster.
With fixing this, remove the wrong comments in set/clear/find bitmap
functions.
Fixes: 1e49a94cf7 ("exfat: add bitmap operations")
Cc: stable@vger.kernel.org # v5.7+
Signed-off-by: Hyeongseok Kim <hyeongseok@gmail.com>
Acked-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4f06dd92b5 upstream.
There are two modes for write(2) and friends in fuse:
a) write through (update page cache, send sync WRITE request to userspace)
b) buffered write (update page cache, async writeout later)
The write through method kept all the page cache pages locked that were
used for the request. Keeping more than one page locked is deadlock prone
and Qian Cai demonstrated this with trinity fuzzing.
The reason for keeping the pages locked is that concurrent mapped reads
shouldn't try to pull possibly stale data into the page cache.
For full page writes, the easy way to fix this is to make the cached page
be the authoritative source by marking the page PG_uptodate immediately.
After this the page can be safely unlocked, since mapped/cached reads will
take the written data from the cache.
Concurrent mapped writes will now cause data in the original WRITE request
to be updated; this however doesn't cause any data inconsistency and this
scenario should be exceedingly rare anyway.
If the WRITE request returns with an error in the above case, currently the
page is not marked uptodate; this means that a concurrent read will always
read consistent data. After this patch the page is uptodate between
writing to the cache and receiving the error: there's window where a cached
read will read the wrong data. While theoretically this could be a
regression, it is unlikely to be one in practice, since this is normal for
buffered writes.
In case of a partial page write to an already uptodate page the locking is
also unnecessary, with the above caveats.
Partial write of a not uptodate page still needs to be handled. One way
would be to read the complete page before doing the write. This is not
possible, since it might break filesystems that don't expect any READ
requests when the file was opened O_WRONLY.
The other solution is to serialize the synchronous write with reads from
the partial pages. The easiest way to do this is to keep the partial pages
locked. The problem is that a write() may involve two such pages (one head
and one tail). This patch fixes it by only locking the partial tail page.
If there's a partial head page as well, then split that off as a separate
WRITE request.
Reported-by: Qian Cai <cai@lca.pw>
Link: https://lore.kernel.org/linux-fsdevel/4794a3fa3742a5e84fb0f934944204b55730829b.camel@lca.pw/
Fixes: ea9b9907b8 ("fuse: implement perform_write")
Cc: <stable@vger.kernel.org> # v2.6.26
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 42984af09a upstream.
overlayfs using jffs2 as the upper filesystem would fail in some cases
since moving to v5.10. The test case used was to run 'touch' on a file
that exists in the lower fs, causing the modification time to be
updated. It returns EINVAL when the bug is triggered.
A bisection showed this was introduced in v5.9-rc1, with commit
36e2c7421f ("fs: don't allow splice read/write without explicit ops").
Reverting that commit restores the expected behaviour.
Some digging showed that this was due to jffs2 lacking an implementation
of splice_write. (For unknown reasons the warn_unsupported that should
trigger was not displaying any output).
Adding this patch resolved the issue and the test now passes.
Cc: stable@vger.kernel.org
Fixes: 36e2c7421f ("fs: don't allow splice read/write without explicit ops")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Lei YU <yulei.sh@bytedance.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 960b9a8a76 upstream.
KASAN report a slab-out-of-bounds problem. The logs are listed below.
It is because in function jffs2_scan_dirent_node, we alloc "checkedlen+1"
bytes for fd->name and we check crc with length rd->nsize. If checkedlen
is less than rd->nsize, it will cause the slab-out-of-bounds problem.
jffs2: Dirent at *** has zeroes in name. Truncating to %d char
==================================================================
BUG: KASAN: slab-out-of-bounds in crc32_le+0x1ce/0x260 at addr ffff8800842cf2d1
Read of size 1 by task test_JFFS2/915
=============================================================================
BUG kmalloc-64 (Tainted: G B O ): kasan: bad access detected
-----------------------------------------------------------------------------
INFO: Allocated in jffs2_alloc_full_dirent+0x2a/0x40 age=0 cpu=1 pid=915
___slab_alloc+0x580/0x5f0
__slab_alloc.isra.24+0x4e/0x64
__kmalloc+0x170/0x300
jffs2_alloc_full_dirent+0x2a/0x40
jffs2_scan_eraseblock+0x1ca4/0x3b64
jffs2_scan_medium+0x285/0xfe0
jffs2_do_mount_fs+0x5fb/0x1bbc
jffs2_do_fill_super+0x245/0x6f0
jffs2_fill_super+0x287/0x2e0
mount_mtd_aux.isra.0+0x9a/0x144
mount_mtd+0x222/0x2f0
jffs2_mount+0x41/0x60
mount_fs+0x63/0x230
vfs_kern_mount.part.6+0x6c/0x1f4
do_mount+0xae8/0x1940
SyS_mount+0x105/0x1d0
INFO: Freed in jffs2_free_full_dirent+0x22/0x40 age=27 cpu=1 pid=915
__slab_free+0x372/0x4e4
kfree+0x1d4/0x20c
jffs2_free_full_dirent+0x22/0x40
jffs2_build_remove_unlinked_inode+0x17a/0x1e4
jffs2_do_mount_fs+0x1646/0x1bbc
jffs2_do_fill_super+0x245/0x6f0
jffs2_fill_super+0x287/0x2e0
mount_mtd_aux.isra.0+0x9a/0x144
mount_mtd+0x222/0x2f0
jffs2_mount+0x41/0x60
mount_fs+0x63/0x230
vfs_kern_mount.part.6+0x6c/0x1f4
do_mount+0xae8/0x1940
SyS_mount+0x105/0x1d0
entry_SYSCALL_64_fastpath+0x1e/0x97
Call Trace:
[<ffffffff815befef>] dump_stack+0x59/0x7e
[<ffffffff812d1d65>] print_trailer+0x125/0x1b0
[<ffffffff812d82c8>] object_err+0x34/0x40
[<ffffffff812dadef>] kasan_report.part.1+0x21f/0x534
[<ffffffff81132401>] ? vprintk+0x2d/0x40
[<ffffffff815f1ee2>] ? crc32_le+0x1ce/0x260
[<ffffffff812db41a>] kasan_report+0x26/0x30
[<ffffffff812d9fc1>] __asan_load1+0x3d/0x50
[<ffffffff815f1ee2>] crc32_le+0x1ce/0x260
[<ffffffff814764ae>] ? jffs2_alloc_full_dirent+0x2a/0x40
[<ffffffff81485cec>] jffs2_scan_eraseblock+0x1d0c/0x3b64
[<ffffffff81488813>] ? jffs2_scan_medium+0xccf/0xfe0
[<ffffffff81483fe0>] ? jffs2_scan_make_ino_cache+0x14c/0x14c
[<ffffffff812da3e9>] ? kasan_unpoison_shadow+0x35/0x50
[<ffffffff812da3e9>] ? kasan_unpoison_shadow+0x35/0x50
[<ffffffff812da462>] ? kasan_kmalloc+0x5e/0x70
[<ffffffff812d5d90>] ? kmem_cache_alloc_trace+0x10c/0x2cc
[<ffffffff818169fb>] ? mtd_point+0xf7/0x130
[<ffffffff81487dc9>] jffs2_scan_medium+0x285/0xfe0
[<ffffffff81487b44>] ? jffs2_scan_eraseblock+0x3b64/0x3b64
[<ffffffff812da3e9>] ? kasan_unpoison_shadow+0x35/0x50
[<ffffffff812da3e9>] ? kasan_unpoison_shadow+0x35/0x50
[<ffffffff812da462>] ? kasan_kmalloc+0x5e/0x70
[<ffffffff812d57df>] ? __kmalloc+0x12b/0x300
[<ffffffff812da462>] ? kasan_kmalloc+0x5e/0x70
[<ffffffff814a2753>] ? jffs2_sum_init+0x9f/0x240
[<ffffffff8148b2ff>] jffs2_do_mount_fs+0x5fb/0x1bbc
[<ffffffff8148ad04>] ? jffs2_del_noinode_dirent+0x640/0x640
[<ffffffff812da462>] ? kasan_kmalloc+0x5e/0x70
[<ffffffff81127c5b>] ? __init_rwsem+0x97/0xac
[<ffffffff81492349>] jffs2_do_fill_super+0x245/0x6f0
[<ffffffff81493c5b>] jffs2_fill_super+0x287/0x2e0
[<ffffffff814939d4>] ? jffs2_parse_options+0x594/0x594
[<ffffffff81819bea>] mount_mtd_aux.isra.0+0x9a/0x144
[<ffffffff81819eb6>] mount_mtd+0x222/0x2f0
[<ffffffff814939d4>] ? jffs2_parse_options+0x594/0x594
[<ffffffff81819c94>] ? mount_mtd_aux.isra.0+0x144/0x144
[<ffffffff81258757>] ? free_pages+0x13/0x1c
[<ffffffff814fa0ac>] ? selinux_sb_copy_data+0x278/0x2e0
[<ffffffff81492b35>] jffs2_mount+0x41/0x60
[<ffffffff81302fb7>] mount_fs+0x63/0x230
[<ffffffff8133755f>] ? alloc_vfsmnt+0x32f/0x3b0
[<ffffffff81337f2c>] vfs_kern_mount.part.6+0x6c/0x1f4
[<ffffffff8133ceec>] do_mount+0xae8/0x1940
[<ffffffff811b94e0>] ? audit_filter_rules.constprop.6+0x1d10/0x1d10
[<ffffffff8133c404>] ? copy_mount_string+0x40/0x40
[<ffffffff812cbf78>] ? alloc_pages_current+0xa4/0x1bc
[<ffffffff81253a89>] ? __get_free_pages+0x25/0x50
[<ffffffff81338993>] ? copy_mount_options.part.17+0x183/0x264
[<ffffffff8133e3a9>] SyS_mount+0x105/0x1d0
[<ffffffff8133e2a4>] ? copy_mnt_ns+0x560/0x560
[<ffffffff810e8391>] ? msa_space_switch_handler+0x13d/0x190
[<ffffffff81be184a>] entry_SYSCALL_64_fastpath+0x1e/0x97
[<ffffffff810e9274>] ? msa_space_switch+0xb0/0xe0
Memory state around the buggy address:
ffff8800842cf180: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff8800842cf200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff8800842cf280: fc fc fc fc fc fc 00 00 00 00 01 fc fc fc fc fc
^
ffff8800842cf300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff8800842cf380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================
Cc: stable@vger.kernel.org
Reported-by: Kunkun Xu <xukunkun1@huawei.com>
Signed-off-by: lizhe <lizhe67@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit de144ff423 upstream.
If the pNFS layout segment is marked with the NFS_LSEG_LAYOUTRETURN
flag, then the assumption is that it has some reporting requirement
to perform through a layoutreturn (e.g. flexfiles layout stats or error
information).
Fixes: 6d597e1750 ("pnfs: only tear down lsegs that precede seqid in LAYOUTRETURN args")
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 39fd018636 upstream.
If the pNFS layout segment is marked with the NFS_LSEG_LAYOUTRETURN
flag, then the assumption is that it has some reporting requirement
to perform through a layoutreturn (e.g. flexfiles layout stats or error
information).
Fixes: e0b7d420f7 ("pNFS: Don't discard layout segments that are marked for return")
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c09f11ef35 upstream.
Fix shift out-of-bounds in xprt_calc_majortimeo(). This is caused
by a garbage timeout (retrans) mount option being passed to nfs mount,
in this case from syzkaller.
If the protocol is XPRT_TRANSPORT_UDP, then 'retrans' is a shift
value for a 64-bit long integer, so 'retrans' cannot be >= 64.
If it is >= 64, fail the mount and return an error.
Fixes: 9954bf92c0 ("NFS: Move mount parameterisation bits into their own file")
Reported-by: syzbot+ba2e91df8f74809417fa@syzkaller.appspotmail.com
Reported-by: syzbot+f3a0fa110fd630ab56c8@syzkaller.appspotmail.com
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Anna Schumaker <anna.schumaker@netapp.com>
Cc: linux-nfs@vger.kernel.org
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b862676e37 upstream.
butt3rflyh4ck <butterflyhuangxx@gmail.com> reported a bug found by
syzkaller fuzzer with custom modifications in 5.12.0-rc3+ [1]:
dump_stack+0xfa/0x151 lib/dump_stack.c:120
print_address_description.constprop.0.cold+0x82/0x32c mm/kasan/report.c:232
__kasan_report mm/kasan/report.c:399 [inline]
kasan_report.cold+0x7c/0xd8 mm/kasan/report.c:416
f2fs_test_bit fs/f2fs/f2fs.h:2572 [inline]
current_nat_addr fs/f2fs/node.h:213 [inline]
get_next_nat_page fs/f2fs/node.c:123 [inline]
__flush_nat_entry_set fs/f2fs/node.c:2888 [inline]
f2fs_flush_nat_entries+0x258e/0x2960 fs/f2fs/node.c:2991
f2fs_write_checkpoint+0x1372/0x6a70 fs/f2fs/checkpoint.c:1640
f2fs_issue_checkpoint+0x149/0x410 fs/f2fs/checkpoint.c:1807
f2fs_sync_fs+0x20f/0x420 fs/f2fs/super.c:1454
__sync_filesystem fs/sync.c:39 [inline]
sync_filesystem fs/sync.c:67 [inline]
sync_filesystem+0x1b5/0x260 fs/sync.c:48
generic_shutdown_super+0x70/0x370 fs/super.c:448
kill_block_super+0x97/0xf0 fs/super.c:1394
The root cause is, if nat entry in checkpoint journal area is corrupted,
e.g. nid of journalled nat entry exceeds max nid value, during checkpoint,
once it tries to flush nat journal to NAT area, get_next_nat_page() may
access out-of-bounds memory on nat_bitmap due to it uses wrong nid value
as bitmap offset.
[1] https://lore.kernel.org/lkml/CAFcO6XOMWdr8pObek6eN6-fs58KG9doRFadgJj-FnF-1x43s2g@mail.gmail.com/T/#u
Reported-and-tested-by: butt3rflyh4ck <butterflyhuangxx@gmail.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3c0315424f upstream.
f2fs didn't properly clean up if verity failed to be enabled on a file:
- It left verity metadata (pages past EOF) in the page cache, which
would be exposed to userspace if the file was later extended.
- It didn't truncate the verity metadata at all (either from cache or
from disk) if an error occurred while setting the verity bit.
Fix these bugs by adding a call to truncate_inode_pages() and ensuring
that we truncate the verity metadata (both from cache and from disk) in
all error paths. Also rework the code to cleanly separate the success
path from the error paths, which makes it much easier to understand.
Finally, log a message if f2fs_truncate() fails, since it might
otherwise fail silently.
Reported-by: Yunlei He <heyunlei@hihonor.com>
Fixes: 95ae251fe8 ("f2fs: add fs-verity support")
Cc: <stable@vger.kernel.org> # v5.4+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3e90331579 upstream.
Conside the following case, it just write a big file into flash,
when complete writing, delete the file, and then power off promptly.
Next time power on, we'll get a replay list like:
...
LEB 1105:211344 len 4144 deletion 0 sqnum 428783 key type 1 inode 80
LEB 15:233544 len 160 deletion 1 sqnum 428785 key type 0 inode 80
LEB 1105:215488 len 4144 deletion 0 sqnum 428787 key type 1 inode 80
...
In the replay list, data nodes' deletion are 0, and the inode node's
deletion is 1. In current logic, the file's dentry will be removed,
but inode and the flash space it occupied will be reserved.
User will see that much free space been disappeared.
We only need to check the deletion value of the following inode type
node of the replay entry.
Fixes: e58725d51f ("ubifs: Handle re-linking of inodes correctly while recovery")
Cc: stable@vger.kernel.org
Signed-off-by: Guochun Mao <guochun.mao@mediatek.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5afa7e8b70 upstream.
statx(2) notes that any attribute that is not indicated as supported
by stx_attributes_mask has no usable value. Commits 801e523796
("fs: move generic stat response attr handling to vfs_getattr_nosec")
and 712b2698e4 ("fs/stat: Define DAX statx attribute") sets
STATX_ATTR_AUTOMOUNT and STATX_ATTR_DAX, respectively, without setting
stx_attributes_mask, which can cause xfstests generic/532 to fail.
Fix this in the same way as commit 1b9598c8fb ("xfs: fix reporting
supported extra file attributes for statx()")
Fixes: 801e523796 ("fs: move generic stat response attr handling to vfs_getattr_nosec")
Fixes: 712b2698e4 ("fs/stat: Define DAX statx attribute")
Cc: stable@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f9690f426b ]
Commit dbcc7d57bf ("btrfs: fix race when cloning extent buffer during
rewind of an old root"), fixed a race when we need to rewind the extent
buffer of an old root. It was caused by picking a new mod log operation
for the extent buffer while getting a cloned extent buffer with an outdated
number of items (off by -1), because we cloned the extent buffer without
locking it first.
However there is still another similar race, but in the opposite direction.
The cloned extent buffer has a number of items that does not match the
number of tree mod log operations that are going to be replayed. This is
because right after we got the last (most recent) tree mod log operation to
replay and before locking and cloning the extent buffer, another task adds
a new pointer to the extent buffer, which results in adding a new tree mod
log operation and incrementing the number of items in the extent buffer.
So after cloning we have mismatch between the number of items in the extent
buffer and the number of mod log operations we are going to apply to it.
This results in hitting a BUG_ON() that produces the following stack trace:
------------[ cut here ]------------
kernel BUG at fs/btrfs/tree-mod-log.c:675!
invalid opcode: 0000 [#1] SMP KASAN PTI
CPU: 3 PID: 4811 Comm: crawl_1215 Tainted: G W 5.12.0-7d1efdf501f8-misc-next+ #99
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
RIP: 0010:tree_mod_log_rewind+0x3b1/0x3c0
Code: 05 48 8d 74 10 (...)
RSP: 0018:ffffc90001027090 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff8880a8514600 RCX: ffffffffaa9e59b6
RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffff8880a851462c
RBP: ffffc900010270e0 R08: 00000000000000c0 R09: ffffed1004333417
R10: ffff88802199a0b7 R11: ffffed1004333416 R12: 000000000000000e
R13: ffff888135af8748 R14: ffff88818766ff00 R15: ffff8880a851462c
FS: 00007f29acf62700(0000) GS:ffff8881f2200000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f0e6013f718 CR3: 000000010d42e003 CR4: 0000000000170ee0
Call Trace:
btrfs_get_old_root+0x16a/0x5c0
? lock_downgrade+0x400/0x400
btrfs_search_old_slot+0x192/0x520
? btrfs_search_slot+0x1090/0x1090
? free_extent_buffer.part.61+0xd7/0x140
? free_extent_buffer+0x13/0x20
resolve_indirect_refs+0x3e9/0xfc0
? lock_downgrade+0x400/0x400
? __kasan_check_read+0x11/0x20
? add_prelim_ref.part.11+0x150/0x150
? lock_downgrade+0x400/0x400
? __kasan_check_read+0x11/0x20
? lock_acquired+0xbb/0x620
? __kasan_check_write+0x14/0x20
? do_raw_spin_unlock+0xa8/0x140
? rb_insert_color+0x340/0x360
? prelim_ref_insert+0x12d/0x430
find_parent_nodes+0x5c3/0x1830
? stack_trace_save+0x87/0xb0
? resolve_indirect_refs+0xfc0/0xfc0
? fs_reclaim_acquire+0x67/0xf0
? __kasan_check_read+0x11/0x20
? lockdep_hardirqs_on_prepare+0x210/0x210
? fs_reclaim_acquire+0x67/0xf0
? __kasan_check_read+0x11/0x20
? ___might_sleep+0x10f/0x1e0
? __kasan_kmalloc+0x9d/0xd0
? trace_hardirqs_on+0x55/0x120
btrfs_find_all_roots_safe+0x142/0x1e0
? find_parent_nodes+0x1830/0x1830
? trace_hardirqs_on+0x55/0x120
? ulist_free+0x1f/0x30
? btrfs_inode_flags_to_xflags+0x50/0x50
iterate_extent_inodes+0x20e/0x580
? tree_backref_for_extent+0x230/0x230
? release_extent_buffer+0x225/0x280
? read_extent_buffer+0xdd/0x110
? lock_downgrade+0x400/0x400
? __kasan_check_read+0x11/0x20
? lock_acquired+0xbb/0x620
? __kasan_check_write+0x14/0x20
? do_raw_spin_unlock+0xa8/0x140
? _raw_spin_unlock+0x22/0x30
? release_extent_buffer+0x225/0x280
iterate_inodes_from_logical+0x129/0x170
? iterate_inodes_from_logical+0x129/0x170
? btrfs_inode_flags_to_xflags+0x50/0x50
? iterate_extent_inodes+0x580/0x580
? __vmalloc_node+0x92/0xb0
? init_data_container+0x34/0xb0
? init_data_container+0x34/0xb0
? kvmalloc_node+0x60/0x80
btrfs_ioctl_logical_to_ino+0x158/0x230
btrfs_ioctl+0x2038/0x4360
? __kasan_check_write+0x14/0x20
? mmput+0x3b/0x220
? btrfs_ioctl_get_supported_features+0x30/0x30
? __kasan_check_read+0x11/0x20
? __kasan_check_read+0x11/0x20
? lock_release+0xc8/0x650
? __might_fault+0x64/0xd0
? __kasan_check_read+0x11/0x20
? lock_downgrade+0x400/0x400
? lockdep_hardirqs_on_prepare+0x210/0x210
? lockdep_hardirqs_on_prepare+0x13/0x210
? _raw_spin_unlock_irqrestore+0x51/0x63
? __kasan_check_read+0x11/0x20
? do_vfs_ioctl+0xfc/0x9d0
? ioctl_file_clone+0xe0/0xe0
? lock_downgrade+0x400/0x400
? lockdep_hardirqs_on_prepare+0x210/0x210
? __kasan_check_read+0x11/0x20
? lock_release+0xc8/0x650
? __task_pid_nr_ns+0xd3/0x250
? __kasan_check_read+0x11/0x20
? __fget_files+0x160/0x230
? __fget_light+0xf2/0x110
__x64_sys_ioctl+0xc3/0x100
do_syscall_64+0x37/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f29ae85b427
Code: 00 00 90 48 8b (...)
RSP: 002b:00007f29acf5fcf8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007f29acf5ff40 RCX: 00007f29ae85b427
RDX: 00007f29acf5ff48 RSI: 00000000c038943b RDI: 0000000000000003
RBP: 0000000001000000 R08: 0000000000000000 R09: 00007f29acf60120
R10: 00005640d5fc7b00 R11: 0000000000000246 R12: 0000000000000003
R13: 00007f29acf5ff48 R14: 00007f29acf5ff40 R15: 00007f29acf5fef8
Modules linked in:
---[ end trace 85e5fce078dfbe04 ]---
(gdb) l *(tree_mod_log_rewind+0x3b1)
0xffffffff819e5b21 is in tree_mod_log_rewind (fs/btrfs/tree-mod-log.c:675).
670 * the modification. As we're going backwards, we do the
671 * opposite of each operation here.
672 */
673 switch (tm->op) {
674 case BTRFS_MOD_LOG_KEY_REMOVE_WHILE_FREEING:
675 BUG_ON(tm->slot < n);
676 fallthrough;
677 case BTRFS_MOD_LOG_KEY_REMOVE_WHILE_MOVING:
678 case BTRFS_MOD_LOG_KEY_REMOVE:
679 btrfs_set_node_key(eb, &tm->key, tm->slot);
(gdb) quit
The following steps explain in more detail how it happens:
1) We have one tree mod log user (through fiemap or the logical ino ioctl),
with a sequence number of 1, so we have fs_info->tree_mod_seq == 1.
This is task A;
2) Another task is at ctree.c:balance_level() and we have eb X currently as
the root of the tree, and we promote its single child, eb Y, as the new
root.
Then, at ctree.c:balance_level(), we call:
ret = btrfs_tree_mod_log_insert_root(root->node, child, true);
3) At btrfs_tree_mod_log_insert_root() we create a tree mod log operation
of type BTRFS_MOD_LOG_KEY_REMOVE_WHILE_FREEING, with a ->logical field
pointing to ebX->start. We only have one item in eb X, so we create
only one tree mod log operation, and store in the "tm_list" array;
4) Then, still at btrfs_tree_mod_log_insert_root(), we create a tree mod
log element of operation type BTRFS_MOD_LOG_ROOT_REPLACE, ->logical set
to ebY->start, ->old_root.logical set to ebX->start, ->old_root.level
set to the level of eb X and ->generation set to the generation of eb X;
5) Then btrfs_tree_mod_log_insert_root() calls tree_mod_log_free_eb() with
"tm_list" as argument. After that, tree_mod_log_free_eb() calls
tree_mod_log_insert(). This inserts the mod log operation of type
BTRFS_MOD_LOG_KEY_REMOVE_WHILE_FREEING from step 3 into the rbtree
with a sequence number of 2 (and fs_info->tree_mod_seq set to 2);
6) Then, after inserting the "tm_list" single element into the tree mod
log rbtree, the BTRFS_MOD_LOG_ROOT_REPLACE element is inserted, which
gets the sequence number 3 (and fs_info->tree_mod_seq set to 3);
7) Back to ctree.c:balance_level(), we free eb X by calling
btrfs_free_tree_block() on it. Because eb X was created in the current
transaction, has no other references and writeback did not happen for
it, we add it back to the free space cache/tree;
8) Later some other task B allocates the metadata extent from eb X, since
it is marked as free space in the space cache/tree, and uses it as a
node for some other btree;
9) The tree mod log user task calls btrfs_search_old_slot(), which calls
btrfs_get_old_root(), and finally that calls tree_mod_log_oldest_root()
with time_seq == 1 and eb_root == eb Y;
10) The first iteration of the while loop finds the tree mod log element
with sequence number 3, for the logical address of eb Y and of type
BTRFS_MOD_LOG_ROOT_REPLACE;
11) Because the operation type is BTRFS_MOD_LOG_ROOT_REPLACE, we don't
break out of the loop, and set root_logical to point to
tm->old_root.logical, which corresponds to the logical address of
eb X;
12) On the next iteration of the while loop, the call to
tree_mod_log_search_oldest() returns the smallest tree mod log element
for the logical address of eb X, which has a sequence number of 2, an
operation type of BTRFS_MOD_LOG_KEY_REMOVE_WHILE_FREEING and
corresponds to the old slot 0 of eb X (eb X had only 1 item in it
before being freed at step 7);
13) We then break out of the while loop and return the tree mod log
operation of type BTRFS_MOD_LOG_ROOT_REPLACE (eb Y), and not the one
for slot 0 of eb X, to btrfs_get_old_root();
14) At btrfs_get_old_root(), we process the BTRFS_MOD_LOG_ROOT_REPLACE
operation and set "logical" to the logical address of eb X, which was
the old root. We then call tree_mod_log_search() passing it the logical
address of eb X and time_seq == 1;
15) But before calling tree_mod_log_search(), task B locks eb X, adds a
key to eb X, which results in adding a tree mod log operation of type
BTRFS_MOD_LOG_KEY_ADD, with a sequence number of 4, to the tree mod
log, and increments the number of items in eb X from 0 to 1.
Now fs_info->tree_mod_seq has a value of 4;
16) Task A then calls tree_mod_log_search(), which returns the most recent
tree mod log operation for eb X, which is the one just added by task B
at the previous step, with a sequence number of 4, a type of
BTRFS_MOD_LOG_KEY_ADD and for slot 0;
17) Before task A locks and clones eb X, task A adds another key to eb X,
which results in adding a new BTRFS_MOD_LOG_KEY_ADD mod log operation,
with a sequence number of 5, for slot 1 of eb X, increments the
number of items in eb X from 1 to 2, and unlocks eb X.
Now fs_info->tree_mod_seq has a value of 5;
18) Task A then locks eb X and clones it. The clone has a value of 2 for
the number of items and the pointer "tm" points to the tree mod log
operation with sequence number 4, not the most recent one with a
sequence number of 5, so there is mismatch between the number of
mod log operations that are going to be applied to the cloned version
of eb X and the number of items in the clone;
19) Task A then calls tree_mod_log_rewind() with the clone of eb X, the
tree mod log operation with sequence number 4 and a type of
BTRFS_MOD_LOG_KEY_ADD, and time_seq == 1;
20) At tree_mod_log_rewind(), we set the local variable "n" with a value
of 2, which is the number of items in the clone of eb X.
Then in the first iteration of the while loop, we process the mod log
operation with sequence number 4, which is targeted at slot 0 and has
a type of BTRFS_MOD_LOG_KEY_ADD. This results in decrementing "n" from
2 to 1.
Then we pick the next tree mod log operation for eb X, which is the
tree mod log operation with a sequence number of 2, a type of
BTRFS_MOD_LOG_KEY_REMOVE_WHILE_FREEING and for slot 0, it is the one
added in step 5 to the tree mod log tree.
We go back to the top of the loop to process this mod log operation,
and because its slot is 0 and "n" has a value of 1, we hit the BUG_ON:
(...)
switch (tm->op) {
case BTRFS_MOD_LOG_KEY_REMOVE_WHILE_FREEING:
BUG_ON(tm->slot < n);
fallthrough;
(...)
Fix this by checking for a more recent tree mod log operation after locking
and cloning the extent buffer of the old root node, and use it as the first
operation to apply to the cloned extent buffer when rewinding it.
Stable backport notes: due to moved code and renames, in =< 5.11 the
change should be applied to ctree.c:get_old_root.
Reported-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
Link: https://lore.kernel.org/linux-btrfs/20210404040732.GZ32440@hungrycats.org/
Fixes: 834328a849 ("Btrfs: tree mod log's old roots could still be part of the tree")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7a9213a935 ]
A few BUG_ON()'s in replace_path are purely to keep us from making
logical mistakes, so replace them with ASSERT()'s.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 592fbcd50c ]
We call btrfs_update_root in btrfs_update_reloc_root, which can fail for
all sorts of reasons, including IO errors. Instead of panicing the box
lets return the error, now that all callers properly handle those
errors.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 84c50ba521 ]
We do memory allocations here, read blocks from disk, all sorts of
operations that could easily fail at any given point. Instead of
panicing the box, simply return the error back up the chain, all callers
at this point have proper error handling.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 061dde8245 upstream.
There is a race between a task aborting a transaction during a commit,
a task doing an fsync and the transaction kthread, which leads to an
use-after-free of the log root tree. When this happens, it results in a
stack trace like the following:
BTRFS info (device dm-0): forced readonly
BTRFS warning (device dm-0): Skipping commit of aborted transaction.
BTRFS: error (device dm-0) in cleanup_transaction:1958: errno=-5 IO failure
BTRFS warning (device dm-0): lost page write due to IO error on /dev/mapper/error-test (-5)
BTRFS warning (device dm-0): Skipping commit of aborted transaction.
BTRFS warning (device dm-0): direct IO failed ino 261 rw 0,0 sector 0xa4e8 len 4096 err no 10
BTRFS error (device dm-0): error writing primary super block to device 1
BTRFS warning (device dm-0): direct IO failed ino 261 rw 0,0 sector 0x12e000 len 4096 err no 10
BTRFS warning (device dm-0): direct IO failed ino 261 rw 0,0 sector 0x12e008 len 4096 err no 10
BTRFS warning (device dm-0): direct IO failed ino 261 rw 0,0 sector 0x12e010 len 4096 err no 10
BTRFS: error (device dm-0) in write_all_supers:4110: errno=-5 IO failure (1 errors while writing supers)
BTRFS: error (device dm-0) in btrfs_sync_log:3308: errno=-5 IO failure
general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6b68: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI
CPU: 2 PID: 2458471 Comm: fsstress Not tainted 5.12.0-rc5-btrfs-next-84 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
RIP: 0010:__mutex_lock+0x139/0xa40
Code: c0 74 19 (...)
RSP: 0018:ffff9f18830d7b00 EFLAGS: 00010202
RAX: 6b6b6b6b6b6b6b68 RBX: 0000000000000001 RCX: 0000000000000002
RDX: ffffffffb9c54d13 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffff9f18830d7bc0 R08: 0000000000000000 R09: 0000000000000000
R10: ffff9f18830d7be0 R11: 0000000000000001 R12: ffff8c6cd199c040
R13: ffff8c6c95821358 R14: 00000000fffffffb R15: ffff8c6cbcf01358
FS: 00007fa9140c2b80(0000) GS:ffff8c6fac600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fa913d52000 CR3: 000000013d2b4003 CR4: 0000000000370ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
? __btrfs_handle_fs_error+0xde/0x146 [btrfs]
? btrfs_sync_log+0x7c1/0xf20 [btrfs]
? btrfs_sync_log+0x7c1/0xf20 [btrfs]
btrfs_sync_log+0x7c1/0xf20 [btrfs]
btrfs_sync_file+0x40c/0x580 [btrfs]
do_fsync+0x38/0x70
__x64_sys_fsync+0x10/0x20
do_syscall_64+0x33/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7fa9142a55c3
Code: 8b 15 09 (...)
RSP: 002b:00007fff26278d48 EFLAGS: 00000246 ORIG_RAX: 000000000000004a
RAX: ffffffffffffffda RBX: 0000563c83cb4560 RCX: 00007fa9142a55c3
RDX: 00007fff26278cb0 RSI: 00007fff26278cb0 RDI: 0000000000000005
RBP: 0000000000000005 R08: 0000000000000001 R09: 00007fff26278d5c
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000340
R13: 00007fff26278de0 R14: 00007fff26278d96 R15: 0000563c83ca57c0
Modules linked in: btrfs dm_zero dm_snapshot dm_thin_pool (...)
---[ end trace ee2f1b19327d791d ]---
The steps that lead to this crash are the following:
1) We are at transaction N;
2) We have two tasks with a transaction handle attached to transaction N.
Task A and Task B. Task B is doing an fsync;
3) Task B is at btrfs_sync_log(), and has saved fs_info->log_root_tree
into a local variable named 'log_root_tree' at the top of
btrfs_sync_log(). Task B is about to call write_all_supers(), but
before that...
4) Task A calls btrfs_commit_transaction(), and after it sets the
transaction state to TRANS_STATE_COMMIT_START, an error happens before
it waits for the transaction's 'num_writers' counter to reach a value
of 1 (no one else attached to the transaction), so it jumps to the
label "cleanup_transaction";
5) Task A then calls cleanup_transaction(), where it aborts the
transaction, setting BTRFS_FS_STATE_TRANS_ABORTED on fs_info->fs_state,
setting the ->aborted field of the transaction and the handle to an
errno value and also setting BTRFS_FS_STATE_ERROR on fs_info->fs_state.
After that, at cleanup_transaction(), it deletes the transaction from
the list of transactions (fs_info->trans_list), sets the transaction
to the state TRANS_STATE_COMMIT_DOING and then waits for the number
of writers to go down to 1, as it's currently 2 (1 for task A and 1
for task B);
6) The transaction kthread is running and sees that BTRFS_FS_STATE_ERROR
is set in fs_info->fs_state, so it calls btrfs_cleanup_transaction().
There it sees the list fs_info->trans_list is empty, and then proceeds
into calling btrfs_drop_all_logs(), which frees the log root tree with
a call to btrfs_free_log_root_tree();
7) Task B calls write_all_supers() and, shortly after, under the label
'out_wake_log_root', it deferences the pointer stored in
'log_root_tree', which was already freed in the previous step by the
transaction kthread. This results in a use-after-free leading to a
crash.
Fix this by deleting the transaction from the list of transactions at
cleanup_transaction() only after setting the transaction state to
TRANS_STATE_COMMIT_DOING and waiting for all existing tasks that are
attached to the transaction to release their transaction handles.
This makes the transaction kthread wait for all the tasks attached to
the transaction to be done with the transaction before dropping the
log roots and doing other cleanups.
Fixes: ef67963dac ("btrfs: drop logs when we've aborted a transaction")
CC: stable@vger.kernel.org # 5.10+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 67addf2900 upstream.
When creating a subvolume we allocate an extent buffer for its root node
after starting a transaction. We setup a root item for the subvolume that
points to that extent buffer and then attempt to insert the root item into
the root tree - however if that fails, due to ENOMEM for example, we do
not free the extent buffer previously allocated and we do not abort the
transaction (as at that point we did nothing that can not be undone).
This means that we effectively do not return the metadata extent back to
the free space cache/tree and we leave a delayed reference for it which
causes a metadata extent item to be added to the extent tree, in the next
transaction commit, without having backreferences. When this happens
'btrfs check' reports the following:
$ btrfs check /dev/sdi
Opening filesystem to check...
Checking filesystem on /dev/sdi
UUID: dce2cb9d-025f-4b05-a4bf-cee0ad3785eb
[1/7] checking root items
[2/7] checking extents
ref mismatch on [30425088 16384] extent item 1, found 0
backref 30425088 root 256 not referenced back 0x564a91c23d70
incorrect global backref count on 30425088 found 1 wanted 0
backpointer mismatch on [30425088 16384]
owner ref check failed [30425088 16384]
ERROR: errors found in extent allocation tree or chunk allocation
[3/7] checking free space cache
[4/7] checking fs roots
[5/7] checking only csums items (without verifying data)
[6/7] checking root refs
[7/7] checking quota groups skipped (not enabled on this FS)
found 212992 bytes used, error(s) found
total csum bytes: 0
total tree bytes: 131072
total fs tree bytes: 32768
total extent tree bytes: 16384
btree space waste bytes: 124669
file data blocks allocated: 65536
referenced 65536
So fix this by freeing the metadata extent if btrfs_insert_root() returns
an error.
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1d8ba9e7e7 upstream.
[BUG]
When running btrfs/071 with inode_need_compress() removed from
compress_file_range(), we got the following crash:
BUG: kernel NULL pointer dereference, address: 0000000000000018
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
Workqueue: btrfs-delalloc btrfs_work_helper [btrfs]
RIP: 0010:compress_file_range+0x476/0x7b0 [btrfs]
Call Trace:
? submit_compressed_extents+0x450/0x450 [btrfs]
async_cow_start+0x16/0x40 [btrfs]
btrfs_work_helper+0xf2/0x3e0 [btrfs]
process_one_work+0x278/0x5e0
worker_thread+0x55/0x400
? process_one_work+0x5e0/0x5e0
kthread+0x168/0x190
? kthread_create_worker_on_cpu+0x70/0x70
ret_from_fork+0x22/0x30
---[ end trace 65faf4eae941fa7d ]---
This is already after the patch "btrfs: inode: fix NULL pointer
dereference if inode doesn't need compression."
[CAUSE]
@pages is firstly created by kcalloc() in compress_file_extent():
pages = kcalloc(nr_pages, sizeof(struct page *), GFP_NOFS);
Then passed to btrfs_compress_pages() to be utilized there:
ret = btrfs_compress_pages(...
pages,
&nr_pages,
...);
btrfs_compress_pages() will initialize each page as output, in
zlib_compress_pages() we have:
pages[nr_pages] = out_page;
nr_pages++;
Normally this is completely fine, but there is a special case which
is in btrfs_compress_pages() itself:
switch (type) {
default:
return -E2BIG;
}
In this case, we didn't modify @pages nor @out_pages, leaving them
untouched, then when we cleanup pages, the we can hit NULL pointer
dereference again:
if (pages) {
for (i = 0; i < nr_pages; i++) {
WARN_ON(pages[i]->mapping);
put_page(pages[i]);
}
...
}
Since pages[i] are all initialized to zero, and btrfs_compress_pages()
doesn't change them at all, accessing pages[i]->mapping would lead to
NULL pointer dereference.
This is not possible for current kernel, as we check
inode_need_compress() before doing pages allocation.
But if we're going to remove that inode_need_compress() in
compress_file_extent(), then it's going to be a problem.
[FIX]
When btrfs_compress_pages() hits its default case, modify @out_pages to
0 to prevent such problem from happening.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=212331
CC: stable@vger.kernel.org # 5.10+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ccd48ec3d4 upstream.
* rqst[1,2,3] is allocated in vars
* each rqst->rq_iov is also allocated in vars or using pooled memory
SMB2_open_free, SMB2_ioctl_free, SMB2_query_info_free are iterating on
each rqst after vars has been freed (use-after-free), and they are
freeing the kvec a second time (double-free).
How to trigger:
* compile with KASAN
* mount a share
$ smbinfo quota /mnt/foo
Segmentation fault
$ dmesg
==================================================================
BUG: KASAN: use-after-free in SMB2_open_free+0x1c/0xa0
Read of size 8 at addr ffff888007b10c00 by task python3/1200
CPU: 2 PID: 1200 Comm: python3 Not tainted 5.12.0-rc6+ #107
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.14.0-0-g155821a-rebuilt.opensuse.org 04/01/2014
Call Trace:
dump_stack+0x93/0xc2
print_address_description.constprop.0+0x18/0x130
? SMB2_open_free+0x1c/0xa0
? SMB2_open_free+0x1c/0xa0
kasan_report.cold+0x7f/0x111
? smb2_ioctl_query_info+0x240/0x990
? SMB2_open_free+0x1c/0xa0
SMB2_open_free+0x1c/0xa0
smb2_ioctl_query_info+0x2bf/0x990
? smb2_query_reparse_tag+0x600/0x600
? cifs_mapchar+0x250/0x250
? rcu_read_lock_sched_held+0x3f/0x70
? cifs_strndup_to_utf16+0x12c/0x1c0
? rwlock_bug.part.0+0x60/0x60
? rcu_read_lock_sched_held+0x3f/0x70
? cifs_convert_path_to_utf16+0xf8/0x140
? smb2_check_message+0x6f0/0x6f0
cifs_ioctl+0xf18/0x16b0
? smb2_query_reparse_tag+0x600/0x600
? cifs_readdir+0x1800/0x1800
? selinux_bprm_creds_for_exec+0x4d0/0x4d0
? do_user_addr_fault+0x30b/0x950
? __x64_sys_openat+0xce/0x140
__x64_sys_ioctl+0xb9/0xf0
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7fdcf1f4ba87
Code: b3 66 90 48 8b 05 11 14 2c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d e1 13 2c 00 f7 d8 64 89 01 48
RSP: 002b:00007ffef1ce7748 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00000000c018cf07 RCX: 00007fdcf1f4ba87
RDX: 0000564c467c5590 RSI: 00000000c018cf07 RDI: 0000000000000003
RBP: 00007ffef1ce7770 R08: 00007ffef1ce7420 R09: 00007fdcf0e0562b
R10: 0000000000000100 R11: 0000000000000246 R12: 0000000000004018
R13: 0000000000000001 R14: 0000000000000003 R15: 0000564c467c5590
Allocated by task 1200:
kasan_save_stack+0x1b/0x40
__kasan_kmalloc+0x7a/0x90
smb2_ioctl_query_info+0x10e/0x990
cifs_ioctl+0xf18/0x16b0
__x64_sys_ioctl+0xb9/0xf0
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xae
Freed by task 1200:
kasan_save_stack+0x1b/0x40
kasan_set_track+0x1c/0x30
kasan_set_free_info+0x20/0x30
__kasan_slab_free+0xe5/0x110
slab_free_freelist_hook+0x53/0x130
kfree+0xcc/0x320
smb2_ioctl_query_info+0x2ad/0x990
cifs_ioctl+0xf18/0x16b0
__x64_sys_ioctl+0xb9/0xf0
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xae
The buggy address belongs to the object at ffff888007b10c00
which belongs to the cache kmalloc-512 of size 512
The buggy address is located 0 bytes inside of
512-byte region [ffff888007b10c00, ffff888007b10e00)
The buggy address belongs to the page:
page:0000000044e14b75 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x7b10
head:0000000044e14b75 order:2 compound_mapcount:0 compound_pincount:0
flags: 0x100000000010200(slab|head)
raw: 0100000000010200 ffffea000015f500 0000000400000004 ffff888001042c80
raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888007b10b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff888007b10b80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff888007b10c00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff888007b10c80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff888007b10d00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
CC: <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f4916649f9 upstream.
We can detect server unresponsiveness only if echoes are enabled.
Echoes can be disabled under two scenarios:
1. The connection is low on credits, so we've disabled echoes/oplocks.
2. The connection has not seen any request till now (other than
negotiate/sess-setup), which is when we enable these two, based on
the credits available.
So this fix will check for dead connection, only when echo is enabled.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
CC: <stable@vger.kernel.org> # v5.8+
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a637f4ae03 upstream.
If smb3_notify() is called at mount point of CIFS, build_path_from_dentry()
returns the pointer to kmalloc-ed memory with terminating zero (this is
empty FileName to be passed to SMB2 CREATE request). This pointer is assigned
to the `path` variable.
Then `path + 1` (to skip first backslash symbol) is passed to
cifs_convert_path_to_utf16(). This is incorrect for empty path and causes
out-of-bound memory access.
Get rid of this "increase by one". cifs_convert_path_to_utf16() already
contains the check for leading backslash in the path.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212693
CC: <stable@vger.kernel.org> # v5.6+
Signed-off-by: Eugene Korenevsky <ekorenevsky@astralinux.ru>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 24a806d849 upstream.
If any unknown i_format fields are set (may be of some new incompat
inode features), mark such inode as unsupported.
Just in case of any new incompat i_format fields added in the future.
Link: https://lore.kernel.org/r/20210329003614.6583-1-hsiangkao@aol.com
Fixes: 431339ba90 ("staging: erofs: add inode operations")
Cc: <stable@vger.kernel.org> # 4.19+
Signed-off-by: Gao Xiang <hsiangkao@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7fab29e356 upstream.
Commit 339ddb53d3 ("fs/epoll: remove unnecessary wakeups of nested
epoll") changed the userspace visible behavior of exclusive waiters
blocked on a common epoll descriptor upon a single event becoming ready.
Previously, all tasks doing epoll_wait would awake, and now only one is
awoken, potentially causing missed wakeups on applications that rely on
this behavior, such as Apache Qpid.
While the aforementioned commit aims at having only a wakeup single path
in ep_poll_callback (with the exceptions of epoll_ctl cases), we need to
restore the wakeup in what was the old ep_scan_ready_list() such that
the next thread can be awoken, in a cascading style, after the waker's
corresponding ep_send_events().
Link: https://lkml.kernel.org/r/20210405231025.33829-3-dave@stgolabs.net
Fixes: 339ddb53d3 ("fs/epoll: remove unnecessary wakeups of nested epoll")
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Roman Penyaev <rpenyaev@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9046625511 upstream.
When mounting eCryptfs, a null "dev_name" argument to ecryptfs_mount()
causes a kernel panic if the parsed options are valid. The easiest way to
reproduce this is to call mount() from userspace with an existing
eCryptfs mount's options and a "source" argument of 0.
Error out if "dev_name" is null in ecryptfs_mount()
Fixes: 237fead619 ("[PATCH] ecryptfs: fs/Makefile and fs/Kconfig")
Cc: stable@vger.kernel.org
Signed-off-by: Jeffrey Mitchell <jeffrey.mitchell@starlab.io>
Signed-off-by: Tyler Hicks <code@tyhicks.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 708fa01597 upstream.
Commit 146d62e5a5 ("ovl: detect overlapping layers") made sure we don't
have overlapping layers, but it also broke the arguably valid use case of
mount -olowerdir=/,upperdir=/subdir,..
where upperdir overlaps lowerdir on the same filesystem. This has been
causing regressions.
Revert the check, but only for the specific case where upperdir and/or
workdir are subdirectories of lowerdir. Any other overlap (e.g. lowerdir
is subdirectory of upperdir, etc) case is crazy, so leave the check in
place for those.
Overlaps are detected at lookup time too, so reverting the mount time check
should be safe.
Fixes: 146d62e5a5 ("ovl: detect overlapping layers")
Cc: <stable@vger.kernel.org> # v5.2
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eaab1d45cd upstream.
Since commit 6815f479ca ("ovl: use only uppermetacopy state in
ovl_lookup()"), overlayfs doesn't put temporary dentry when there is a
metacopy error, which leads to dentry leaks when shutting down the related
superblock:
overlayfs: refusing to follow metacopy origin for (/file0)
...
BUG: Dentry (____ptrval____){i=3f33,n=file3} still in use (1) [unmount of overlay overlay]
...
WARNING: CPU: 1 PID: 432 at umount_check.cold+0x107/0x14d
CPU: 1 PID: 432 Comm: unmount-overlay Not tainted 5.12.0-rc5 #1
...
RIP: 0010:umount_check.cold+0x107/0x14d
...
Call Trace:
d_walk+0x28c/0x950
? dentry_lru_isolate+0x2b0/0x2b0
? __kasan_slab_free+0x12/0x20
do_one_tree+0x33/0x60
shrink_dcache_for_umount+0x78/0x1d0
generic_shutdown_super+0x70/0x440
kill_anon_super+0x3e/0x70
deactivate_locked_super+0xc4/0x160
deactivate_super+0xfa/0x140
cleanup_mnt+0x22e/0x370
__cleanup_mnt+0x1a/0x30
task_work_run+0x139/0x210
do_exit+0xb0c/0x2820
? __kasan_check_read+0x1d/0x30
? find_held_lock+0x35/0x160
? lock_release+0x1b6/0x660
? mm_update_next_owner+0xa20/0xa20
? reacquire_held_locks+0x3f0/0x3f0
? __sanitizer_cov_trace_const_cmp4+0x22/0x30
do_group_exit+0x135/0x380
__do_sys_exit_group.isra.0+0x20/0x20
__x64_sys_exit_group+0x3c/0x50
do_syscall_64+0x45/0x70
entry_SYSCALL_64_after_hwframe+0x44/0xae
...
VFS: Busy inodes after unmount of overlay. Self-destruct in 5 seconds. Have a nice day...
This fix has been tested with a syzkaller reproducer.
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: <stable@vger.kernel.org> # v5.8+
Reported-by: syzbot <syzkaller@googlegroups.com>
Fixes: 6815f479ca ("ovl: use only uppermetacopy state in ovl_lookup()")
Signed-off-by: Mickaël Salaün <mic@linux.microsoft.com>
Link: https://lore.kernel.org/r/20210329164907.2133175-1-mic@digikod.net
Reviewed-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0c93ac6940 upstream.
This does the directory entry name verification for the legacy
"fillonedir" (and compat) interface that goes all the way back to the
dark ages before we had a proper dirent, and the readdir() system call
returned just a single entry at a time.
Nobody should use this interface unless you still have binaries from
1991, but let's do it right.
This came up during discussions about unsafe_copy_to_user() and proper
checking of all the inputs to it, as the networking layer is looking to
use it in a few new places. So let's make sure the _old_ users do it
all right and proper, before we add new ones.
See also commit 8a23eb804c ("Make filldir[64]() verify the directory
entry filename is valid") which did the proper modern interfaces that
people actually use. It had a note:
Note that I didn't bother adding the checks to any legacy interfaces
that nobody uses.
which this now corrects. Note that we really don't care about POSIX and
the presense of '/' in a directory entry, but verify_dirent_name() also
ends up doing the proper name length verification which is what the
input checking discussion was about.
[ Another option would be to remove the support for this particular very
old interface: any binaries that use it are likely a.out binaries, and
they will no longer run anyway since we removed a.out binftm support
in commit eac6165570 ("x86: Deprecate a.out support").
But I'm not sure which came first: getdents() or ELF support, so let's
pretend somebody might still have a working binary that uses the
legacy readdir() case.. ]
Link: https://lore.kernel.org/lkml/CAHk-=wjbvzCAhAtvG0d81W5o0-KT5PPTHhfJ5ieDFq+bGtgOYg@mail.gmail.com/
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f8b78caf21 ]
If IOCB_NOWAIT is set on submission, then that needs to get propagated to
REQ_NOWAIT on the block side. Otherwise we completely lose this
information, and any issuer of IOCB_NOWAIT IO will potentially end up
blocking on eg request allocation on the storage side.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4b982bd0f3 ]
S_ISBLK is marked as unbounded work for async preparation, because it
doesn't match S_ISREG. That is incorrect, as any read/write to a block
device is also a bounded operation. Fix it up and ensure that S_ISBLK
isn't marked unbounded.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ff132c5f93 ]
Before this patch, gfs2's freeze function failed to report an error
when the target file system was already frozen as it should (and as
generic vfs function freeze_super does. Similarly, gfs2's thaw function
failed to report an error when trying to thaw a file system that is not
frozen, as vfs function thaw_super does. The errors were checked, but
it always returned a 0 return code.
This patch adds the missing error return codes to gfs2 freeze and thaw.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 62dd0f98a0 ]
Interrupting mount with ^C quickly enough can cause the kthread_run()
calls in gfs2's init_threads() to fail and the error path leads to a
deadlock on the s_umount rwsem. The abridged chain of events is:
[mount path]
get_tree_bdev()
sget_fc()
alloc_super()
down_write_nested(&s->s_umount, SINGLE_DEPTH_NESTING); [acquired]
gfs2_fill_super()
gfs2_make_fs_rw()
init_threads()
kthread_run()
( Interrupted )
[Error path]
gfs2_gl_hash_clear()
flush_workqueue(glock_workqueue)
wait_for_completion()
[workqueue context]
glock_work_func()
run_queue()
do_xmote()
freeze_go_sync()
freeze_super()
down_write(&sb->s_umount) [deadlock]
In freeze_go_sync() there is a gfs2_withdrawn() check that we can use to
make sure freeze_super() is not called in the error path, so add a
gfs2_withdraw_delayed() call when init_threads() fails.
Ref: https://bugzilla.kernel.org/show_bug.cgi?id=212231
Reported-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7f6c411c9b ]
1) argument should not be freed in any case - the caller already has
it as ->s_fs_info (and uses it a lot afterwards)
2) allocate readlink buffer with kmalloc() - the caller has no way
to tell if it's got that (on absolute symlink) or a result of
kasprintf(). Sure, for SLAB and SLUB kfree() works on results of
kmem_cache_alloc(), but that's not documented anywhere, might change
in the future *and* is already not true for SLOB.
Fixes: 52b209f7b8 ("get rid of hostfs_read_inode()")
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit df41872b68 upstream.
I encountered a hung task issue, but not a performance one. I run DIO
on a device (need lba continuous, for example open channel ssd), maybe
hungtask in below case:
DIO: Checkpoint:
get addr A(at boundary), merge into BIO,
no submit because boundary missing
flush dirty data(get addr A+1), wait IO(A+1)
writeback timeout, because DIO(A) didn't submit
get addr A+2 fail, because checkpoint is doing
dio_send_cur_page() may clear sdio->boundary, so prevent it from missing
a boundary.
Link: https://lkml.kernel.org/r/20210322042253.38312-1-jack.qiu@huawei.com
Fixes: b1058b9812 ("direct-io: submit bio after boundary buffer is added to it")
Signed-off-by: Jack Qiu <jack.qiu@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 90bd070aae upstream.
The following deadlock is detected:
truncate -> setattr path is waiting for pending direct IO to be done (inode->i_dio_count become zero) with inode->i_rwsem held (down_write).
PID: 14827 TASK: ffff881686a9af80 CPU: 20 COMMAND: "ora_p005_hrltd9"
#0 __schedule at ffffffff818667cc
#1 schedule at ffffffff81866de6
#2 inode_dio_wait at ffffffff812a2d04
#3 ocfs2_setattr at ffffffffc05f322e [ocfs2]
#4 notify_change at ffffffff812a5a09
#5 do_truncate at ffffffff812808f5
#6 do_sys_ftruncate.constprop.18 at ffffffff81280cf2
#7 sys_ftruncate at ffffffff81280d8e
#8 do_syscall_64 at ffffffff81003949
#9 entry_SYSCALL_64_after_hwframe at ffffffff81a001ad
dio completion path is going to complete one direct IO (decrement
inode->i_dio_count), but before that it hung at locking inode->i_rwsem:
#0 __schedule+700 at ffffffff818667cc
#1 schedule+54 at ffffffff81866de6
#2 rwsem_down_write_failed+536 at ffffffff8186aa28
#3 call_rwsem_down_write_failed+23 at ffffffff8185a1b7
#4 down_write+45 at ffffffff81869c9d
#5 ocfs2_dio_end_io_write+180 at ffffffffc05d5444 [ocfs2]
#6 ocfs2_dio_end_io+85 at ffffffffc05d5a85 [ocfs2]
#7 dio_complete+140 at ffffffff812c873c
#8 dio_aio_complete_work+25 at ffffffff812c89f9
#9 process_one_work+361 at ffffffff810b1889
#10 worker_thread+77 at ffffffff810b233d
#11 kthread+261 at ffffffff810b7fd5
#12 ret_from_fork+62 at ffffffff81a0035e
Thus above forms ABBA deadlock. The same deadlock was mentioned in
upstream commit 28f5a8a7c0 ("ocfs2: should wait dio before inode lock
in ocfs2_setattr()"). It seems that that commit only removed the
cluster lock (the victim of above dead lock) from the ABBA deadlock
party.
End-user visible effects: Process hang in truncate -> ocfs2_setattr path
and other processes hang at ocfs2_dio_end_io_write path.
This is to fix the deadlock itself. It removes inode_lock() call from
dio completion path to remove the deadlock and add ip_alloc_sem lock in
setattr path to synchronize the inode modifications.
[wen.gang.wang@oracle.com: remove the "had_alloc_lock" as suggested]
Link: https://lkml.kernel.org/r/20210402171344.1605-1-wen.gang.wang@oracle.com
Link: https://lkml.kernel.org/r/20210331203654.3911-1-wen.gang.wang@oracle.com
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4f0ed93fb9 upstream.
That (and traversals in case of umount .) should be done before
complete_walk(). Either a braino or mismerge damage on queue
reorders - either way, I should've spotted that much earlier.
Fucked-up-by: Al Viro <viro@zeniv.linux.org.uk>
X-Paperbag: Brown
Fixes: 161aff1d93 "LOOKUP_MOUNTPOINT: fold path_mountpointat() into path_lookupat()"
Cc: stable@vger.kernel.org # v5.7+
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 219481a8f9 ]
Make SMB2 not print out an error when an oplock break is received for an
unknown handle, similar to SMB1. The debug message which is printed for
these unknown handles may also be misleading, so fix that too.
The SMB2 lease break path is not affected by this patch.
Without this, a program which writes to a file from one thread, and
opens, reads, and writes the same file from another thread triggers the
below errors several times a minute when run against a Samba server
configured with "smb2 leases = no".
CIFS: VFS: \\192.168.0.1 No task to wake, unknown frame received! NumMids 2
00000000: 424d53fe 00000040 00000000 00000012 .SMB@...........
00000010: 00000001 00000000 ffffffff ffffffff ................
00000020: 00000000 00000000 00000000 00000000 ................
00000030: 00000000 00000000 00000000 00000000 ................
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Reviewed-by: Tom Talpey <tom@talpey.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cee8f4f6fc ]
RHBZ: 1933527
Under SMB1 + POSIX, if an inode is reused on a server after we have read and
cached a part of a file, when we then open the new file with the
re-cycled inode there is a chance that we may serve the old data out of cache
to the application.
This only happens for SMB1 (deprecated) and when posix are used.
The simplest solution to avoid this race is to force a revalidate
on smb1-posix open.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5116784039 ]
The GD_NEED_PART_SCAN is set by bdev_check_media_change to initiate
a partition scan while removing a block device. It should be cleared
after blk_drop_paritions because blk_drop_paritions could return
-EBUSY and then the consequence __blkdev_get has no chance to do
delete_partition if GD_NEED_PART_SCAN already cleared.
It causes some problems on some card readers. Ex. Realtek card
reader 0bda:0328 and 0bda:0158. The device node of the partition
will not disappear after the memory card removed. Thus the user
applications can not update the device mapping correctly.
BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1920874
Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210323085219.24428-1-chris.chiu@canonical.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 5e46d1b78a upstream.
syzbot is reporting NULL pointer dereference at reiserfs_security_init()
[1], for commit ab17c4f021 ("reiserfs: fixup xattr_root caching")
is assuming that REISERFS_SB(s)->xattr_root != NULL in
reiserfs_xattr_jcreate_nblocks() despite that commit made
REISERFS_SB(sb)->priv_root != NULL && REISERFS_SB(s)->xattr_root == NULL
case possible.
I guess that commit 6cb4aff0a7 ("reiserfs: fix oops while creating
privroot with selinux enabled") wanted to check xattr_root != NULL
before reiserfs_xattr_jcreate_nblocks(), for the changelog is talking
about the xattr root.
The issue is that while creating the privroot during mount
reiserfs_security_init calls reiserfs_xattr_jcreate_nblocks which
dereferences the xattr root. The xattr root doesn't exist, so we get
an oops.
Therefore, update reiserfs_xattrs_initialized() to check both the
privroot and the xattr root.
Link: https://syzkaller.appspot.com/bug?id=8abaedbdeb32c861dc5340544284167dd0e46cde # [1]
Reported-and-tested-by: syzbot <syzbot+690cb1e51970435f9775@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Fixes: 6cb4aff0a7 ("reiserfs: fix oops while creating privroot with selinux enabled")
Acked-by: Jeff Mahoney <jeffm@suse.com>
Acked-by: Jan Kara <jack@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0031275d11 ]
Without that it's not safe to use them in a linked combination with
others.
Now combinations like IORING_OP_SENDMSG followed by IORING_OP_SPLICE
should be possible.
We already handle short reads and writes for the following opcodes:
- IORING_OP_READV
- IORING_OP_READ_FIXED
- IORING_OP_READ
- IORING_OP_WRITEV
- IORING_OP_WRITE_FIXED
- IORING_OP_WRITE
- IORING_OP_SPLICE
- IORING_OP_TEE
Now we have it for these as well:
- IORING_OP_SENDMSG
- IORING_OP_SEND
- IORING_OP_RECVMSG
- IORING_OP_RECV
For IORING_OP_RECVMSG we also check for the MSG_TRUNC and MSG_CTRUNC
flags in order to call req_set_fail_links().
There might be applications arround depending on the behavior
that even short send[msg]()/recv[msg]() retuns continue an
IOSQE_IO_LINK chain.
It's very unlikely that such applications pass in MSG_WAITALL,
which is only defined in 'man 2 recvmsg', but not in 'man 2 sendmsg'.
It's expected that the low level sock_sendmsg() call just ignores
MSG_WAITALL, as MSG_ZEROCOPY is also ignored without explicitly set
SO_ZEROCOPY.
We also expect the caller to know about the implicit truncation to
MAX_RW_COUNT, which we don't detect.
cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/r/c4e1a4cc0d905314f4d5dc567e65a7b09621aab3.1615908477.git.metze@samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5dccdc5a19 ]
In ext4_rename(), when RENAME_WHITEOUT failed to add new entry into
directory, it ends up dropping new created whiteout inode under the
running transaction. After commit <9b88f9fb0d2> ("ext4: Do not iput inode
under running transaction"), we follow the assumptions that evict() does
not get called from a transaction context but in ext4_rename() it breaks
this suggestion. Although it's not a real problem, better to obey it, so
this patch add inode to orphan list and stop transaction before final
iput().
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Link: https://lore.kernel.org/r/20210303131703.330415-2-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit efe814a471 ]
It's racy to modify req->flags from a not owning context, e.g. linked
timeout calling req_set_fail_links() for the master request might race
with that request setting/clearing flags while being executed
concurrently. Just remove req_set_fail_links(prev) from
io_link_timeout_fn(), io_async_find_and_cancel() and functions down the
line take care of setting the fail bit.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4250dd868 ]
When the server tries to do a callback and a client fails it due to
authentication problems, we need the server to set callback down
flag in RENEW so that client can recover.
Suggested-by: Bruce Fields <bfields@redhat.com>
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Benjamin Coddington <bcodding@redhat.com>
Link: https://lore.kernel.org/linux-nfs/FB84E90A-1A03-48B3-8BF7-D9D10AC2C9FE@oracle.com/T/#t
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5808fecc57 ]
In case if isi.nr_pages is 0, we are making sis->pages (which is
unsigned int) a huge value in iomap_swapfile_activate() by assigning -1.
This could cause a kernel crash in kernel v4.18 (with below signature).
Or could lead to unknown issues on latest kernel if the fake big swap gets
used.
Fix this issue by returning -EINVAL in case of nr_pages is 0, since it
is anyway a invalid swapfile. Looks like this issue will be hit when
we have pagesize < blocksize type of configuration.
I was able to hit the issue in case of a tiny swap file with below
test script.
https://raw.githubusercontent.com/riteshharjani/LinuxStudy/master/scripts/swap-issue.sh
kernel crash analysis on v4.18
==============================
On v4.18 kernel, it causes a kernel panic, since sis->pages becomes
a huge value and isi.nr_extents is 0. When 0 is returned it is
considered as a swapfile over NFS and SWP_FILE is set (sis->flags |= SWP_FILE).
Then when swapoff was getting called it was calling a_ops->swap_deactivate()
if (sis->flags & SWP_FILE) is true. Since a_ops->swap_deactivate() is
NULL in case of XFS, it causes below panic.
Panic signature on v4.18 kernel:
=======================================
root@qemu:/home/qemu# [ 8291.723351] XFS (loop2): Unmounting Filesystem
[ 8292.123104] XFS (loop2): Mounting V5 Filesystem
[ 8292.132451] XFS (loop2): Ending clean mount
[ 8292.263362] Adding 4294967232k swap on /mnt1/test/swapfile. Priority:-2 extents:1 across:274877906880k
[ 8292.277834] Unable to handle kernel paging request for instruction fetch
[ 8292.278677] Faulting instruction address: 0x00000000
cpu 0x19: Vector: 400 (Instruction Access) at [c0000009dd5b7ad0]
pc: 0000000000000000
lr: c0000000003eb9dc: destroy_swap_extents+0xfc/0x120
sp: c0000009dd5b7d50
msr: 8000000040009033
current = 0xc0000009b6710080
paca = 0xc00000003ffcb280 irqmask: 0x03 irq_happened: 0x01
pid = 5604, comm = swapoff
Linux version 4.18.0 (riteshh@xxxxxxx) (gcc version 8.4.0 (Ubuntu 8.4.0-1ubuntu1~18.04)) #57 SMP Wed Mar 3 01:33:04 CST 2021
enter ? for help
[link register ] c0000000003eb9dc destroy_swap_extents+0xfc/0x120
[c0000009dd5b7d50] c0000000025a7058 proc_poll_event+0x0/0x4 (unreliable)
[c0000009dd5b7da0] c0000000003f0498 sys_swapoff+0x3f8/0x910
[c0000009dd5b7e30] c00000000000bbe4 system_call+0x5c/0x70
Exception: c01 (System Call) at 00007ffff7d208d8
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
[djwong: rework the comment to provide more details]
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7005227369 ]
When NFSD_V4 is enabled and CRYPTO is disabled,
Kbuild gives the following warning:
WARNING: unmet direct dependencies detected for CRYPTO_SHA256
Depends on [n]: CRYPTO [=n]
Selected by [y]:
- NFSD_V4 [=y] && NETWORK_FILESYSTEMS [=y] && NFSD [=y] && PROC_FS [=y]
WARNING: unmet direct dependencies detected for CRYPTO_MD5
Depends on [n]: CRYPTO [=n]
Selected by [y]:
- NFSD_V4 [=y] && NETWORK_FILESYSTEMS [=y] && NFSD [=y] && PROC_FS [=y]
This is because NFSD_V4 selects CRYPTO_MD5 and CRYPTO_SHA256,
without depending on or selecting CRYPTO, despite those config options
being subordinate to CRYPTO.
Signed-off-by: Julian Braha <julianbraha@gmail.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit efc6134527 ]
When generic/371 is run on kvm-xfstests using 5.10 and 5.11 kernels, it
fails at significant rates on the two test scenarios that disable
delayed allocation (ext3conv and data_journal) and force actual block
allocation for the fallocate and pwrite functions in the test. The
failure rate on 5.10 for both ext3conv and data_journal on one test
system typically runs about 85%. On 5.11, the failure rate on ext3conv
sometimes drops to as low as 1% while the rate on data_journal
increases to nearly 100%.
The observed failures are largely due to ext4_should_retry_alloc()
cutting off block allocation retries when s_mb_free_pending (used to
indicate that a transaction in progress will free blocks) is 0.
However, free space is usually available when this occurs during runs
of generic/371. It appears that a thread attempting to allocate
blocks is just missing transaction commits in other threads that
increase the free cluster count and reset s_mb_free_pending while
the allocating thread isn't running. Explicitly testing for free space
availability avoids this race.
The current code uses a post-increment operator in the conditional
expression that determines whether the retry limit has been exceeded.
This means that the conditional expression uses the value of the
retry counter before it's increased, resulting in an extra retry cycle.
The current code actually retries twice before hitting its retry limit
rather than once.
Increasing the retry limit to 3 from the current actual maximum retry
count of 2 in combination with the change described above reduces the
observed failure rate to less that 0.1% on both ext3conv and
data_journal with what should be limited impact on users sensitive to
the overhead caused by retries.
A per filesystem percpu counter exported via sysfs is added to allow
users or developers to track the number of times the retry limit is
exceeded without resorting to debugging methods. This should provide
some insight into worst case retry behavior.
Signed-off-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/r/20210218151132.19678-1-enwlinux@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3f9b9efd82 ]
Right now "mount -t virtiofs -o dax myfs /mnt/virtiofs" succeeds even
if filesystem deivce does not have a cache window and hence DAX can't
be supported.
This gives a false sense to user that they are using DAX with virtiofs
but fact of the matter is that they are not.
Fix this by returning error if dax can't be supported and user has asked
for it.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit f91436d55a upstream.
syzbot found UBSAN: shift-out-of-bounds in ext4_mb_init [1], when
1 << sbi->s_es->s_log_groups_per_flex is bigger than UINT_MAX,
where sbi->s_mb_prefetch is unsigned integer type.
32 is the maximum allowed power of s_log_groups_per_flex. Following if
check will also trigger UBSAN shift-out-of-bound:
if (1 << sbi->s_es->s_log_groups_per_flex >= UINT_MAX) {
So I'm checking it against the raw number, perhaps there is another way
to calculate UINT_MAX max power. Also use min_t as to make sure it's
uint type.
[1] UBSAN: shift-out-of-bounds in fs/ext4/mballoc.c:2713:24
shift exponent 60 is too large for 32-bit type 'int'
Call Trace:
__dump_stack lib/dump_stack.c:79 [inline]
dump_stack+0x137/0x1be lib/dump_stack.c:120
ubsan_epilogue lib/ubsan.c:148 [inline]
__ubsan_handle_shift_out_of_bounds+0x432/0x4d0 lib/ubsan.c:395
ext4_mb_init_backend fs/ext4/mballoc.c:2713 [inline]
ext4_mb_init+0x19bc/0x19f0 fs/ext4/mballoc.c:2898
ext4_fill_super+0xc2ec/0xfbe0 fs/ext4/super.c:4983
Reported-by: syzbot+a8b4b0c60155e87e9484@syzkaller.appspotmail.com
Signed-off-by: Sabyrzhan Tasbolatov <snovitoll@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210224095800.3350002-1-snovitoll@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 163f0ec1df upstream.
Syzbot is reporting that ext4 can enter fs reclaim from kvmalloc() while
the transaction is started like:
fs_reclaim_acquire+0x117/0x150 mm/page_alloc.c:4340
might_alloc include/linux/sched/mm.h:193 [inline]
slab_pre_alloc_hook mm/slab.h:493 [inline]
slab_alloc_node mm/slub.c:2817 [inline]
__kmalloc_node+0x5f/0x430 mm/slub.c:4015
kmalloc_node include/linux/slab.h:575 [inline]
kvmalloc_node+0x61/0xf0 mm/util.c:587
kvmalloc include/linux/mm.h:781 [inline]
ext4_xattr_inode_cache_find fs/ext4/xattr.c:1465 [inline]
ext4_xattr_inode_lookup_create fs/ext4/xattr.c:1508 [inline]
ext4_xattr_set_entry+0x1ce6/0x3780 fs/ext4/xattr.c:1649
ext4_xattr_ibody_set+0x78/0x2b0 fs/ext4/xattr.c:2224
ext4_xattr_set_handle+0x8f4/0x13e0 fs/ext4/xattr.c:2380
ext4_xattr_set+0x13a/0x340 fs/ext4/xattr.c:2493
This should be impossible since transaction start sets PF_MEMALLOC_NOFS.
Add some assertions to the code to catch if something isn't working as
expected early.
Link: https://lore.kernel.org/linux-ext4/000000000000563a0205bafb7970@google.com/
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210222171626.21884-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 45a4546c61 upstream.
For AES256 encryption (GCM and CCM), we need to adjust the size of a few
fields to 32 bytes instead of 16 to accommodate the larger keys.
Also, the L value supplied to the key generator needs to be changed from
to 256 when these algorithms are used.
Keeping the ioctl struct for dumping keys of the same size for now.
Will send out a different patch for that one.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: <stable@vger.kernel.org> # v5.10+
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cfc63fc812 upstream.
There were two problems (one of which could cause data corruption)
that were noticed with duplicate extents (ie reflink)
when debugging why various xfstests were being incorrectly skipped
(e.g. generic/138, generic/140, generic/142). First, we were not
updating the file size locally in the cache when extending a
file due to reflink (it would refresh after actimeo expires)
but xfstest was checking the size immediately which was still
0 so caused the test to be skipped. Second, we were setting
the target file size (which could shrink the file) in all cases
to the end of the reflinked range rather than only setting the
target file size when reflink would extend the file.
CC: <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d81269fecb ]
io_provide_buffers_prep()'s "p->len * p->nbufs" to sign extension
problems. Not a huge problem as it's only used for access_ok() and
increases the checked length, but better to keep typing right.
Reported-by: Colin Ian King <colin.king@canonical.com>
Fixes: efe68c1ca8 ("io_uring: validate the full range of provided buffers for access")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/562376a39509e260d8532186a06226e56eb1f594.1616149233.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 8b44ca2b63 upstream.
The checks for maximum metadata block size is missing
SQUASHFS_BLOCK_OFFSET (the two byte length count).
Link: https://lkml.kernel.org/r/2069685113.2081245.1614583677427@webmail.123-reg.co.uk
Fixes: f37aa4c736 ("squashfs: add more sanity checks in id lookup")
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Cc: Sean Nyekjaer <sean@geanix.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c1b2028315 upstream.
When mouting a squashfs image created without inode compression it fails
with: "unable to read inode lookup table"
It turns out that the BLOCK_OFFSET is missing when checking the
SQUASHFS_METADATA_SIZE agaist the actual size.
Link: https://lkml.kernel.org/r/20210226092903.1473545-1-sean@geanix.com
Fixes: eabac19e40 ("squashfs: add more sanity checks in inode lookup")
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Acked-by: Phillip Lougher <phillip@squashfs.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4f8be1f53b ]
The NFSv4 protocol doesn't have any notion of reomoving an attribute, so
removexattr(path,"system.nfs4_acl") doesn't make sense.
There's no documented return value. Arguably it could be EOPNOTSUPP but
I'm a little worried an application might take that to mean that we
don't support ACLs or xattrs. How about EINVAL?
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e3d100eae4 ]
A customer has reported that their dmesg were being flooded by
CIFS: VFS: \\server Cancelling wait for mid xxx cmd: a
CIFS: VFS: \\server Cancelling wait for mid yyy cmd: b
CIFS: VFS: \\server Cancelling wait for mid zzz cmd: c
because some processes that were performing statfs(2) on the share had
been interrupted due to their automount setup when certain users
logged in and out.
Change it to FYI as they should be mostly informative rather than
error messages.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad3dbe35c8 ]
CREATE requests return a post_op_fh3, rather than nfs_fh3. The
post_op_fh3 includes an extra word to indicate 'handle_follows'.
Without that additional word, create fails when full 64-byte
filehandles are in use.
Add NFS3_post_op_fh_sz, and correct the size calculation for
NFS3_createres_sz.
Signed-off-by: Frank Sorenson <sorenson@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a0590473c5 ]
This follows what was done in 8c2fabc654.
With the default being m, it's impossible to build the module into the
kernel.
Signed-off-by: Timo Rothenpieler <timo@rothenpieler.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a5a2cfd34 ]
This patch adds code to function trans_drain to remove drained
bd elements from the ail lists, if queued, before freeing the bd.
If we don't remove the bd from the ail, function ail_drain will
try to reference the bd after it has been freed by trans_drain.
Thanks to Andy Price for his analysis of the problem.
Reported-by: Andy Price <anprice@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 88fd98a230 ]
When doing a large read or write workload we only
very gradually increase the number of credits
which can cause problems with parallelizing large i/o
(I/O ramps up more slowly than it should for large
read/write workloads) especially with multichannel
when the number of credits on the secondary channels
starts out low (e.g. less than about 130) or when
recovering after server throttled back the number
of credit.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 05946d4b7a upstream.
smb311_update_preauth_hash() uses the shash in server->secmech without
appropriate locking, and this can lead to sessions corrupting each
other's preauth hashes.
The following script can easily trigger the problem:
#!/bin/sh -e
NMOUNTS=10
for i in $(seq $NMOUNTS);
mkdir -p /tmp/mnt$i
umount /tmp/mnt$i 2>/dev/null || :
done
while :; do
for i in $(seq $NMOUNTS); do
mount -t cifs //192.168.0.1/test /tmp/mnt$i -o ... &
done
wait
for i in $(seq $NMOUNTS); do
umount /tmp/mnt$i
done
done
Usually within seconds this leads to one or more of the mounts failing
with the following errors, and a "Bad SMB2 signature for message" is
seen in the server logs:
CIFS: VFS: \\192.168.0.1 failed to connect to IPC (rc=-13)
CIFS: VFS: cifs_mount failed w/return code = -13
Fix it by holding the server mutex just like in the other places where
the shashes are used.
Fixes: 8bd68c6e47 ("CIFS: implement v3.11 preauth integrity")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
CC: <stable@vger.kernel.org>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
[aaptel: backport to kernel without CIFS_SESS_OP]
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8210bb29c1 upstream.
This patch adds rename whiteout support in fast commits. Note that the
whiteout object that gets created is actually char device. Which
imples, the function ext4_inode_journal_mode(struct inode *inode)
would return "JOURNAL_DATA" for this inode. This has a consequence in
fast commit code that it will make creation of the whiteout object a
fast-commit ineligible behavior and thus will fall back to full
commits. With this patch, this can be observed by running fast commits
with rename whiteout and seeing the stats generated by ext4_fc_stats
tracepoint as follows:
ext4_fc_stats: dev 254:32 fc ineligible reasons:
XATTR:0, CROSS_RENAME:0, JOURNAL_FLAG_CHANGE:0, NO_MEM:0, SWAP_BOOT:0,
RESIZE:0, RENAME_DIR:0, FALLOC_RANGE:0, INODE_JOURNAL_DATA:16;
num_commits:6, ineligible: 6, numblks: 3
So in short, this patch guarantees that in case of rename whiteout, we
fall back to full commits.
Amir mentioned that instead of creating a new whiteout object for
every rename, we can create a static whiteout object with irrelevant
nlink. That will make fast commits to not fall back to full
commit. But until this happens, this patch will ensure correctness by
falling back to full commits.
Fixes: 8016e29f43 ("ext4: fast commit recovery path")
Cc: stable@kernel.org
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20210316221921.1124955-1-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7d8bd3c76d upstream.
If set_large_file = 1 and errors occur in ext4_handle_dirty_metadata(),
the error code will be overridden, go to out_brelse to avoid this
situation.
Signed-off-by: Shijie Luo <luoshijie1@huawei.com>
Link: https://lore.kernel.org/r/20210312065051.36314-1-luoshijie1@huawei.com
Cc: stable@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6b22489911 upstream.
Syzbot report a warning that ext4 may create an empty ea_inode if set
an empty extent attribute to a file on the file system which is no free
blocks left.
WARNING: CPU: 6 PID: 10667 at fs/ext4/xattr.c:1640 ext4_xattr_set_entry+0x10f8/0x1114 fs/ext4/xattr.c:1640
...
Call trace:
ext4_xattr_set_entry+0x10f8/0x1114 fs/ext4/xattr.c:1640
ext4_xattr_block_set+0x1d0/0x1b1c fs/ext4/xattr.c:1942
ext4_xattr_set_handle+0x8a0/0xf1c fs/ext4/xattr.c:2390
ext4_xattr_set+0x120/0x1f0 fs/ext4/xattr.c:2491
ext4_xattr_trusted_set+0x48/0x5c fs/ext4/xattr_trusted.c:37
__vfs_setxattr+0x208/0x23c fs/xattr.c:177
...
Now, ext4 try to store extent attribute into an external inode if
ext4_xattr_block_set() return -ENOSPC, but for the case of store an
empty extent attribute, store the extent entry into the extent
attribute block is enough. A simple reproduce below.
fallocate test.img -l 1M
mkfs.ext4 -F -b 2048 -O ea_inode test.img
mount test.img /mnt
dd if=/dev/zero of=/mnt/foo bs=2048 count=500
setfattr -n "user.test" /mnt/foo
Reported-by: syzbot+98b881fdd8ebf45ab4ae@syzkaller.appspotmail.com
Fixes: 9c6e7853c5 ("ext4: reserve space for xattr entries/names")
Cc: stable@kernel.org
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Link: https://lore.kernel.org/r/20210305120508.298465-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b7ff91fd03 upstream.
If we failed to add new entry on rename whiteout, we cannot reset the
old->de entry directly, because the old->de could have moved from under
us during make indexed dir. So find the old entry again before reset is
needed, otherwise it may corrupt the filesystem as below.
/dev/sda: Entry '00000001' in ??? (12) has deleted/unused inode 15. CLEARED.
/dev/sda: Unattached inode 75
/dev/sda: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY.
Fixes: 6b4b8e6b4a ("ext4: fix bug for rename with RENAME_WHITEOUT")
Cc: stable@vger.kernel.org
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Link: https://lore.kernel.org/r/20210303131703.330415-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f053cf7aa6 upstream.
ext4 didn't properly clean up if verity failed to be enabled on a file:
- It left verity metadata (pages past EOF) in the page cache, which
would be exposed to userspace if the file was later extended.
- It didn't truncate the verity metadata at all (either from cache or
from disk) if an error occurred while setting the verity bit.
Fix these bugs by adding a call to truncate_inode_pages() and ensuring
that we truncate the verity metadata (both from cache and from disk) in
all error paths. Also rework the code to cleanly separate the success
path from the error paths, which makes it much easier to understand.
Reported-by: Yunlei He <heyunlei@hihonor.com>
Fixes: c93d8f8858 ("ext4: add basic fs-verity support")
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20210302200420.137977-2-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5abbe51a52 upstream.
Preparation for fixing get_nr_restart_syscall() on X86 for COMPAT.
Add a new helper which sets restart_block->fn and calls a dummy
arch_set_restart_data() helper.
Fixes: 609c19a385 ("x86/ptrace: Stop setting TS_COMPAT in ptrace code")
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210201174641.GA17871@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d5bf630f35 ]
Before this patch, function signal_our_withdraw referenced the journal
inode immediately. But corrupt file systems may have some invalid
journals, in which case our attempt to read it in will withdraw and the
resulting signal_our_withdraw would dereference the NULL value.
This patch adds a check to signal_our_withdraw so that if the journal
has not yet been initialized, it simply returns and does the old-style
withdraw.
Thanks, Andy Price, for his analysis.
Reported-by: syzbot+50a8a9cf8127f2c6f5df@syzkaller.appspotmail.com
Fixes: 601ef0d52e ("gfs2: Force withdraw to replay journals and wait for it to finish")
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 96b1454f2e ]
Before this patch, sister functions gfs2_make_fs_rw and gfs2_make_fs_ro locked
(held) the freeze glock by calling gfs2_freeze_lock and gfs2_freeze_unlock.
The problem is, not all the callers of gfs2_make_fs_ro should be doing this.
The three callers of gfs2_make_fs_ro are: remount (gfs2_reconfigure),
signal_our_withdraw, and unmount (gfs2_put_super). But when unmounting the
file system we can get into the following circular lock dependency:
deactivate_super
down_write(&s->s_umount); <-------------------------------------- s_umount
deactivate_locked_super
gfs2_kill_sb
kill_block_super
generic_shutdown_super
gfs2_put_super
gfs2_make_fs_ro
gfs2_glock_nq_init sd_freeze_gl
freeze_go_sync
if (freeze glock in SH)
freeze_super (vfs)
down_write(&sb->s_umount); <------- s_umount
This patch moves the hold of the freeze glock outside the two sister rw/ro
functions to their callers, but it doesn't request the glock from
gfs2_put_super, thus eliminating the circular dependency.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c77b52c0a1 ]
Many places in the gfs2 code queued and dequeued the freeze glock.
Almost all of them acquire it in SHARED mode, and need to specify the
same LM_FLAG_NOEXP and GL_EXACT flags.
This patch adds common helper functions gfs2_freeze_lock and gfs2_freeze_unlock
to make the code more readable, and to prepare for the next patch.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b5b0ecb736 ]
The callback can only be armed, if we get -EIOCBQUEUED returned. It's
important that we clear the WAITQ bit for other cases, otherwise we can
queue for async retry and filemap will assume that we're armed and
return -EAGAIN instead of just blocking for the IO.
Cc: stable@vger.kernel.org # 5.9+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7c977a58dc ]
If we're exiting the ring, just let the IO fail with -EAGAIN as nobody
will care anyway. It's not the right context to reissue from.
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 65af8f0166 upstream.
Applications that create and extend and write to a file do not
expect to see 0 allocation size. When file is extended,
set its allocation size to a plausible value until we have a
chance to query the server for it. When the file is cached
this will prevent showing an impossible number of allocated
blocks (like 0). This fixes e.g. xfstests 614 which does
1) create a file and set its size to 64K
2) mmap write 64K to the file
3) stat -c %b for the file (to query the number of allocated blocks)
It was failing because we returned 0 blocks. Even though we would
return the correct cached file size, we returned an impossible
allocation size.
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: <stable@vger.kernel.org>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3ebba796fa upstream.
If we create it in a disabled state because IORING_SETUP_R_DISABLED is
set on ring creation, we need to ensure that we've kicked the thread if
we're exiting before it's been explicitly disabled. Otherwise we can run
into a deadlock where exit is waiting go park the SQPOLL thread, but the
SQPOLL thread itself is waiting to get a signal to start.
That results in the below trace of both tasks hung, waiting on each other:
INFO: task syz-executor458:8401 blocked for more than 143 seconds.
Not tainted 5.11.0-next-20210226-syzkaller #0
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:syz-executor458 state:D stack:27536 pid: 8401 ppid: 8400 flags:0x00004004
Call Trace:
context_switch kernel/sched/core.c:4324 [inline]
__schedule+0x90c/0x21a0 kernel/sched/core.c:5075
schedule+0xcf/0x270 kernel/sched/core.c:5154
schedule_timeout+0x1db/0x250 kernel/time/timer.c:1868
do_wait_for_common kernel/sched/completion.c:85 [inline]
__wait_for_common kernel/sched/completion.c:106 [inline]
wait_for_common kernel/sched/completion.c:117 [inline]
wait_for_completion+0x168/0x270 kernel/sched/completion.c:138
io_sq_thread_park fs/io_uring.c:7115 [inline]
io_sq_thread_park+0xd5/0x130 fs/io_uring.c:7103
io_uring_cancel_task_requests+0x24c/0xd90 fs/io_uring.c:8745
__io_uring_files_cancel+0x110/0x230 fs/io_uring.c:8840
io_uring_files_cancel include/linux/io_uring.h:47 [inline]
do_exit+0x299/0x2a60 kernel/exit.c:780
do_group_exit+0x125/0x310 kernel/exit.c:922
__do_sys_exit_group kernel/exit.c:933 [inline]
__se_sys_exit_group kernel/exit.c:931 [inline]
__x64_sys_exit_group+0x3a/0x50 kernel/exit.c:931
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x43e899
RSP: 002b:00007ffe89376d48 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
RAX: ffffffffffffffda RBX: 00000000004af2f0 RCX: 000000000043e899
RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000
RBP: 0000000000000000 R08: ffffffffffffffc0 R09: 0000000010000000
R10: 0000000000008011 R11: 0000000000000246 R12: 00000000004af2f0
R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000001
INFO: task iou-sqp-8401:8402 can't die for more than 143 seconds.
task:iou-sqp-8401 state:D stack:30272 pid: 8402 ppid: 8400 flags:0x00004004
Call Trace:
context_switch kernel/sched/core.c:4324 [inline]
__schedule+0x90c/0x21a0 kernel/sched/core.c:5075
schedule+0xcf/0x270 kernel/sched/core.c:5154
schedule_timeout+0x1db/0x250 kernel/time/timer.c:1868
do_wait_for_common kernel/sched/completion.c:85 [inline]
__wait_for_common kernel/sched/completion.c:106 [inline]
wait_for_common kernel/sched/completion.c:117 [inline]
wait_for_completion+0x168/0x270 kernel/sched/completion.c:138
io_sq_thread+0x27d/0x1ae0 fs/io_uring.c:6717
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294
INFO: task iou-sqp-8401:8402 blocked for more than 143 seconds.
Reported-by: syzbot+fb5458330b4442f2090d@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9c7d83ae6b upstream.
syzbot is hitting WARN_ON(pstore_sb != sb) at pstore_kill_sb() [1], for the
assumption that pstore_sb != NULL is wrong because pstore_fill_super() will
not assign pstore_sb = sb when new_inode() for d_make_root() returned NULL
(due to memory allocation fault injection).
Since mount_single() calls pstore_kill_sb() when pstore_fill_super()
failed, pstore_kill_sb() needs to be aware of such failure path.
[1] https://syzkaller.appspot.com/bug?id=6abacb8da5137cb47a416f2bef95719ed60508a0
Reported-by: syzbot <syzbot+d0cf0ad6513e9a1da5df@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210214031307.57903-1-penguin-kernel@I-love.SAKURA.ne.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 614c975017 upstream.
A cleanup of the inter SSC copy needs to call fput() of the source
file handle to make sure that file structure is freed as well as
drop the reference on the superblock to unmount the source server.
Fixes: 36e1e5ba90 ("NFSD: Fix use-after-free warning when doing inter-server copy")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bfdd89f232 upstream.
The typical result of the backwards comparison here is that the source
server in a server-to-server copy will return BAD_STATEID within a few
seconds of the copy starting, instead of giving the copy a full lease
period, so the copy_file_range() call will end up unnecessarily
returning a short read.
Fixes: 624322f1ad "NFSD add COPY_NOTIFY operation"
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d30881f573 upstream.
If a file is unhashed, then we're going to reject it anyway and retry,
so make sure we skip it when we're doing the RCU lockless lookup.
This avoids a number of unnecessary nfserr_jukebox returns from
nfsd_file_acquire()
Fixes: 65294c1f2c ("nfsd: add a new struct file caching facility to nfsd")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a7889c6320 upstream.
afs_listxattr() lists all the available special afs xattrs (i.e. those in
the "afs.*" space), no matter what type of server we're dealing with. But
OpenAFS servers, for example, cannot deal with some of the extra-capable
attributes that AuriStor (YFS) servers provide. Unfortunately, the
presence of the afs.yfs.* attributes causes errors[1] for anything that
tries to read them if the server is of the wrong type.
Fix the problem by removing afs_listxattr() so that none of the special
xattrs are listed (AFS doesn't support xattrs). It does mean, however,
that getfattr won't list them, though they can still be accessed with
getxattr() and setxattr().
This can be tested with something like:
getfattr -d -m ".*" /afs/example.com/path/to/file
With this change, none of the afs.* attributes should be visible.
Changes:
ver #2:
- Hide all of the afs.* xattrs, not just the ACL ones.
Fixes: ae46578b96 ("afs: Get YFS ACLs and information through xattrs")
Reported-by: Gaja Sophie Peters <gaja.peters@math.uni-hamburg.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Gaja Sophie Peters <gaja.peters@math.uni-hamburg.de>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: http://lists.infradead.org/pipermail/linux-afs/2021-March/003502.html [1]
Link: http://lists.infradead.org/pipermail/linux-afs/2021-March/003567.html # v1
Link: http://lists.infradead.org/pipermail/linux-afs/2021-March/003573.html # v2
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 64fcbb6158 upstream.
If someone attempts to access YFS-related xattrs (e.g. afs.yfs.acl) on a
file on a non-YFS AFS server (such as OpenAFS), then the kernel will jump
to a NULL function pointer because the afs_fetch_acl_operation descriptor
doesn't point to a function for issuing an operation on a non-YFS
server[1].
Fix this by making afs_wait_for_operation() check that the issue_afs_rpc
method is set before jumping to it and setting -ENOTSUPP if not. This fix
also covers other potential operations that also only exist on YFS servers.
afs_xattr_get/set_yfs() then need to translate -ENOTSUPP to -ENODATA as the
former error is internal to the kernel.
The bug shows up as an oops like the following:
BUG: kernel NULL pointer dereference, address: 0000000000000000
[...]
Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6.
[...]
Call Trace:
afs_wait_for_operation+0x83/0x1b0 [kafs]
afs_xattr_get_yfs+0xe6/0x270 [kafs]
__vfs_getxattr+0x59/0x80
vfs_getxattr+0x11c/0x140
getxattr+0x181/0x250
? __check_object_size+0x13f/0x150
? __fput+0x16d/0x250
__x64_sys_fgetxattr+0x64/0xb0
do_syscall_64+0x49/0xc0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7fb120a9defe
This was triggered with "cp -a" which attempts to copy xattrs, including
afs ones, but is easier to reproduce with getfattr, e.g.:
getfattr -d -m ".*" /afs/openafs.org/
Fixes: e49c7b2f6d ("afs: Build an abstraction around an "operation" concept")
Reported-by: Gaja Sophie Peters <gaja.peters@math.uni-hamburg.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Gaja Sophie Peters <gaja.peters@math.uni-hamburg.de>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
cc: linux-afs@lists.infradead.org
Link: http://lists.infradead.org/pipermail/linux-afs/2021-March/003498.html [1]
Link: http://lists.infradead.org/pipermail/linux-afs/2021-March/003566.html # v1
Link: http://lists.infradead.org/pipermail/linux-afs/2021-March/003572.html # v2
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 34e49994d0 upstream.
The free space tree bitmap slab cache is created with SLAB_RED_ZONE but
that's a debugging flag and not always enabled. Also the other slabs are
created with at least SLAB_MEM_SPREAD that we want as well to average
the memory placement cost.
Reported-by: Vlastimil Babka <vbabka@suse.cz>
Fixes: 3acd48507d ("btrfs: fix allocation of free space cache v1 bitmap pages")
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dbcc7d57bf upstream.
While resolving backreferences, as part of a logical ino ioctl call or
fiemap, we can end up hitting a BUG_ON() when replaying tree mod log
operations of a root, triggering a stack trace like the following:
------------[ cut here ]------------
kernel BUG at fs/btrfs/ctree.c:1210!
invalid opcode: 0000 [#1] SMP KASAN PTI
CPU: 1 PID: 19054 Comm: crawl_335 Tainted: G W 5.11.0-2d11c0084b02-misc-next+ #89
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
RIP: 0010:__tree_mod_log_rewind+0x3b1/0x3c0
Code: 05 48 8d 74 10 (...)
RSP: 0018:ffffc90001eb70b8 EFLAGS: 00010297
RAX: 0000000000000000 RBX: ffff88812344e400 RCX: ffffffffb28933b6
RDX: 0000000000000007 RSI: dffffc0000000000 RDI: ffff88812344e42c
RBP: ffffc90001eb7108 R08: 1ffff11020b60a20 R09: ffffed1020b60a20
R10: ffff888105b050f9 R11: ffffed1020b60a1f R12: 00000000000000ee
R13: ffff8880195520c0 R14: ffff8881bc958500 R15: ffff88812344e42c
FS: 00007fd1955e8700(0000) GS:ffff8881f5600000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007efdb7928718 CR3: 000000010103a006 CR4: 0000000000170ee0
Call Trace:
btrfs_search_old_slot+0x265/0x10d0
? lock_acquired+0xbb/0x600
? btrfs_search_slot+0x1090/0x1090
? free_extent_buffer.part.61+0xd7/0x140
? free_extent_buffer+0x13/0x20
resolve_indirect_refs+0x3e9/0xfc0
? lock_downgrade+0x3d0/0x3d0
? __kasan_check_read+0x11/0x20
? add_prelim_ref.part.11+0x150/0x150
? lock_downgrade+0x3d0/0x3d0
? __kasan_check_read+0x11/0x20
? lock_acquired+0xbb/0x600
? __kasan_check_write+0x14/0x20
? do_raw_spin_unlock+0xa8/0x140
? rb_insert_color+0x30/0x360
? prelim_ref_insert+0x12d/0x430
find_parent_nodes+0x5c3/0x1830
? resolve_indirect_refs+0xfc0/0xfc0
? lock_release+0xc8/0x620
? fs_reclaim_acquire+0x67/0xf0
? lock_acquire+0xc7/0x510
? lock_downgrade+0x3d0/0x3d0
? lockdep_hardirqs_on_prepare+0x160/0x210
? lock_release+0xc8/0x620
? fs_reclaim_acquire+0x67/0xf0
? lock_acquire+0xc7/0x510
? poison_range+0x38/0x40
? unpoison_range+0x14/0x40
? trace_hardirqs_on+0x55/0x120
btrfs_find_all_roots_safe+0x142/0x1e0
? find_parent_nodes+0x1830/0x1830
? btrfs_inode_flags_to_xflags+0x50/0x50
iterate_extent_inodes+0x20e/0x580
? tree_backref_for_extent+0x230/0x230
? lock_downgrade+0x3d0/0x3d0
? read_extent_buffer+0xdd/0x110
? lock_downgrade+0x3d0/0x3d0
? __kasan_check_read+0x11/0x20
? lock_acquired+0xbb/0x600
? __kasan_check_write+0x14/0x20
? _raw_spin_unlock+0x22/0x30
? __kasan_check_write+0x14/0x20
iterate_inodes_from_logical+0x129/0x170
? iterate_inodes_from_logical+0x129/0x170
? btrfs_inode_flags_to_xflags+0x50/0x50
? iterate_extent_inodes+0x580/0x580
? __vmalloc_node+0x92/0xb0
? init_data_container+0x34/0xb0
? init_data_container+0x34/0xb0
? kvmalloc_node+0x60/0x80
btrfs_ioctl_logical_to_ino+0x158/0x230
btrfs_ioctl+0x205e/0x4040
? __might_sleep+0x71/0xe0
? btrfs_ioctl_get_supported_features+0x30/0x30
? getrusage+0x4b6/0x9c0
? __kasan_check_read+0x11/0x20
? lock_release+0xc8/0x620
? __might_fault+0x64/0xd0
? lock_acquire+0xc7/0x510
? lock_downgrade+0x3d0/0x3d0
? lockdep_hardirqs_on_prepare+0x210/0x210
? lockdep_hardirqs_on_prepare+0x210/0x210
? __kasan_check_read+0x11/0x20
? do_vfs_ioctl+0xfc/0x9d0
? ioctl_file_clone+0xe0/0xe0
? lock_downgrade+0x3d0/0x3d0
? lockdep_hardirqs_on_prepare+0x210/0x210
? __kasan_check_read+0x11/0x20
? lock_release+0xc8/0x620
? __task_pid_nr_ns+0xd3/0x250
? lock_acquire+0xc7/0x510
? __fget_files+0x160/0x230
? __fget_light+0xf2/0x110
__x64_sys_ioctl+0xc3/0x100
do_syscall_64+0x37/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7fd1976e2427
Code: 00 00 90 48 8b 05 (...)
RSP: 002b:00007fd1955e5cf8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007fd1955e5f40 RCX: 00007fd1976e2427
RDX: 00007fd1955e5f48 RSI: 00000000c038943b RDI: 0000000000000004
RBP: 0000000001000000 R08: 0000000000000000 R09: 00007fd1955e6120
R10: 0000557835366b00 R11: 0000000000000246 R12: 0000000000000004
R13: 00007fd1955e5f48 R14: 00007fd1955e5f40 R15: 00007fd1955e5ef8
Modules linked in:
---[ end trace ec8931a1c36e57be ]---
(gdb) l *(__tree_mod_log_rewind+0x3b1)
0xffffffff81893521 is in __tree_mod_log_rewind (fs/btrfs/ctree.c:1210).
1205 * the modification. as we're going backwards, we do the
1206 * opposite of each operation here.
1207 */
1208 switch (tm->op) {
1209 case MOD_LOG_KEY_REMOVE_WHILE_FREEING:
1210 BUG_ON(tm->slot < n);
1211 fallthrough;
1212 case MOD_LOG_KEY_REMOVE_WHILE_MOVING:
1213 case MOD_LOG_KEY_REMOVE:
1214 btrfs_set_node_key(eb, &tm->key, tm->slot);
Here's what happens to hit that BUG_ON():
1) We have one tree mod log user (through fiemap or the logical ino ioctl),
with a sequence number of 1, so we have fs_info->tree_mod_seq == 1;
2) Another task is at ctree.c:balance_level() and we have eb X currently as
the root of the tree, and we promote its single child, eb Y, as the new
root.
Then, at ctree.c:balance_level(), we call:
tree_mod_log_insert_root(eb X, eb Y, 1);
3) At tree_mod_log_insert_root() we create tree mod log elements for each
slot of eb X, of operation type MOD_LOG_KEY_REMOVE_WHILE_FREEING each
with a ->logical pointing to ebX->start. These are placed in an array
named tm_list.
Lets assume there are N elements (N pointers in eb X);
4) Then, still at tree_mod_log_insert_root(), we create a tree mod log
element of operation type MOD_LOG_ROOT_REPLACE, ->logical set to
ebY->start, ->old_root.logical set to ebX->start, ->old_root.level set
to the level of eb X and ->generation set to the generation of eb X;
5) Then tree_mod_log_insert_root() calls tree_mod_log_free_eb() with
tm_list as argument. After that, tree_mod_log_free_eb() calls
__tree_mod_log_insert() for each member of tm_list in reverse order,
from highest slot in eb X, slot N - 1, to slot 0 of eb X;
6) __tree_mod_log_insert() sets the sequence number of each given tree mod
log operation - it increments fs_info->tree_mod_seq and sets
fs_info->tree_mod_seq as the sequence number of the given tree mod log
operation.
This means that for the tm_list created at tree_mod_log_insert_root(),
the element corresponding to slot 0 of eb X has the highest sequence
number (1 + N), and the element corresponding to the last slot has the
lowest sequence number (2);
7) Then, after inserting tm_list's elements into the tree mod log rbtree,
the MOD_LOG_ROOT_REPLACE element is inserted, which gets the highest
sequence number, which is N + 2;
8) Back to ctree.c:balance_level(), we free eb X by calling
btrfs_free_tree_block() on it. Because eb X was created in the current
transaction, has no other references and writeback did not happen for
it, we add it back to the free space cache/tree;
9) Later some other task T allocates the metadata extent from eb X, since
it is marked as free space in the space cache/tree, and uses it as a
node for some other btree;
10) The tree mod log user task calls btrfs_search_old_slot(), which calls
get_old_root(), and finally that calls __tree_mod_log_oldest_root()
with time_seq == 1 and eb_root == eb Y;
11) First iteration of the while loop finds the tree mod log element with
sequence number N + 2, for the logical address of eb Y and of type
MOD_LOG_ROOT_REPLACE;
12) Because the operation type is MOD_LOG_ROOT_REPLACE, we don't break out
of the loop, and set root_logical to point to tm->old_root.logical
which corresponds to the logical address of eb X;
13) On the next iteration of the while loop, the call to
tree_mod_log_search_oldest() returns the smallest tree mod log element
for the logical address of eb X, which has a sequence number of 2, an
operation type of MOD_LOG_KEY_REMOVE_WHILE_FREEING and corresponds to
the old slot N - 1 of eb X (eb X had N items in it before being freed);
14) We then break out of the while loop and return the tree mod log operation
of type MOD_LOG_ROOT_REPLACE (eb Y), and not the one for slot N - 1 of
eb X, to get_old_root();
15) At get_old_root(), we process the MOD_LOG_ROOT_REPLACE operation
and set "logical" to the logical address of eb X, which was the old
root. We then call tree_mod_log_search() passing it the logical
address of eb X and time_seq == 1;
16) Then before calling tree_mod_log_search(), task T adds a key to eb X,
which results in adding a tree mod log operation of type
MOD_LOG_KEY_ADD to the tree mod log - this is done at
ctree.c:insert_ptr() - but after adding the tree mod log operation
and before updating the number of items in eb X from 0 to 1...
17) The task at get_old_root() calls tree_mod_log_search() and gets the
tree mod log operation of type MOD_LOG_KEY_ADD just added by task T.
Then it enters the following if branch:
if (old_root && tm && tm->op != MOD_LOG_KEY_REMOVE_WHILE_FREEING) {
(...)
} (...)
Calls read_tree_block() for eb X, which gets a reference on eb X but
does not lock it - task T has it locked.
Then it clones eb X while it has nritems set to 0 in its header, before
task T sets nritems to 1 in eb X's header. From hereupon we use the
clone of eb X which no other task has access to;
18) Then we call __tree_mod_log_rewind(), passing it the MOD_LOG_KEY_ADD
mod log operation we just got from tree_mod_log_search() in the
previous step and the cloned version of eb X;
19) At __tree_mod_log_rewind(), we set the local variable "n" to the number
of items set in eb X's clone, which is 0. Then we enter the while loop,
and in its first iteration we process the MOD_LOG_KEY_ADD operation,
which just decrements "n" from 0 to (u32)-1, since "n" is declared with
a type of u32. At the end of this iteration we call rb_next() to find the
next tree mod log operation for eb X, that gives us the mod log operation
of type MOD_LOG_KEY_REMOVE_WHILE_FREEING, for slot 0, with a sequence
number of N + 1 (steps 3 to 6);
20) Then we go back to the top of the while loop and trigger the following
BUG_ON():
(...)
switch (tm->op) {
case MOD_LOG_KEY_REMOVE_WHILE_FREEING:
BUG_ON(tm->slot < n);
fallthrough;
(...)
Because "n" has a value of (u32)-1 (4294967295) and tm->slot is 0.
Fix this by taking a read lock on the extent buffer before cloning it at
ctree.c:get_old_root(). This should be done regardless of the extent
buffer having been freed and reused, as a concurrent task might be
modifying it (while holding a write lock on it).
Reported-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
Link: https://lore.kernel.org/linux-btrfs/20210227155037.GN28049@hungrycats.org/
Fixes: 834328a849 ("Btrfs: tree mod log's old roots could still be part of the tree")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6980d29ce4 upstream.
In zonefs_open_zone(), if opened zone count is larger than
.s_max_open_zones threshold, we missed to recover .i_wr_refcnt,
fix this.
Fixes: b5c00e9757 ("zonefs: open/close zone on file open/close")
Cc: <stable@vger.kernel.org>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1601ea068b upstream.
The sequential write constraint of sequential zone file prevent their
use as swap files. Only allow conventional zone files to be used as swap
files.
Fixes: 8dcc1a9d90 ("fs: New zonefs file system")
Cc: <stable@vger.kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ebfd68cd0c upstream.
zonefs updates the size of a sequential zone file inode only on
completion of direct writes. When executing asynchronous append writes
(with a file open with O_APPEND or using RWF_APPEND), the use of the
current inode size in generic_write_checks() to set an iocb offset thus
leads to unaligned write if an application issues an append write
operation with another write already being executed.
Fix this problem by introducing zonefs_write_checks() as a modified
version of generic_write_checks() using the file inode wp_offset for an
append write iocb offset. Also introduce zonefs_write_check_limits() to
replace generic_write_check_limits() call. This zonefs special helper
makes sure that the maximum file limit used is the maximum size of the
file being accessed.
Since zonefs_write_checks() already truncates the iov_iter, the calls
to iov_iter_truncate() in zonefs_file_dio_write() and
zonefs_file_buffered_write() are removed.
Fixes: 8dcc1a9d90 ("fs: New zonefs file system")
Cc: <stable@vger.kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6ee65a7730 upstream.
This reverts commit 94415b06eb.
That commit claimed to allow a client to get a read delegation when it
was the only writer. Actually it allowed a client to get a read
delegation when *any* client has a write open!
The main problem is that it's depending on nfs4_clnt_odstate structures
that are actually only maintained for pnfs exports.
This causes clients to miss writes performed by other clients, even when
there have been intervening closes and opens, violating close-to-open
cache consistency.
We can do this a different way, but first we should just revert this.
I've added pynfs 4.1 test DELEG19 to test for this, as I should have
done originally!
Cc: stable@vger.kernel.org
Reported-by: Timo Rothenpieler <timo@rothenpieler.org>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4aa5e00203 upstream.
This reverts commit 50747dd5e4 "nfsd4: remove check_conflicting_opens
warning", as a prerequisite for reverting 94415b06eb, which has a
serious bug.
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e7850f4d84 upstream.
There is a deadlock in bm_register_write:
First, in the begining of the function, a lock is taken on the binfmt_misc
root inode with inode_lock(d_inode(root)).
Then, if the user used the MISC_FMT_OPEN_FILE flag, the function will call
open_exec on the user-provided interpreter.
open_exec will call a path lookup, and if the path lookup process includes
the root of binfmt_misc, it will try to take a shared lock on its inode
again, but it is already locked, and the code will get stuck in a deadlock
To reproduce the bug:
$ echo ":iiiii:E::ii::/proc/sys/fs/binfmt_misc/bla:F" > /proc/sys/fs/binfmt_misc/register
backtrace of where the lock occurs (#5):
0 schedule () at ./arch/x86/include/asm/current.h:15
1 0xffffffff81b51237 in rwsem_down_read_slowpath (sem=0xffff888003b202e0, count=<optimized out>, state=state@entry=2) at kernel/locking/rwsem.c:992
2 0xffffffff81b5150a in __down_read_common (state=2, sem=<optimized out>) at kernel/locking/rwsem.c:1213
3 __down_read (sem=<optimized out>) at kernel/locking/rwsem.c:1222
4 down_read (sem=<optimized out>) at kernel/locking/rwsem.c:1355
5 0xffffffff811ee22a in inode_lock_shared (inode=<optimized out>) at ./include/linux/fs.h:783
6 open_last_lookups (op=0xffffc9000022fe34, file=0xffff888004098600, nd=0xffffc9000022fd10) at fs/namei.c:3177
7 path_openat (nd=nd@entry=0xffffc9000022fd10, op=op@entry=0xffffc9000022fe34, flags=flags@entry=65) at fs/namei.c:3366
8 0xffffffff811efe1c in do_filp_open (dfd=<optimized out>, pathname=pathname@entry=0xffff8880031b9000, op=op@entry=0xffffc9000022fe34) at fs/namei.c:3396
9 0xffffffff811e493f in do_open_execat (fd=fd@entry=-100, name=name@entry=0xffff8880031b9000, flags=<optimized out>, flags@entry=0) at fs/exec.c:913
10 0xffffffff811e4a92 in open_exec (name=<optimized out>) at fs/exec.c:948
11 0xffffffff8124aa84 in bm_register_write (file=<optimized out>, buffer=<optimized out>, count=19, ppos=<optimized out>) at fs/binfmt_misc.c:682
12 0xffffffff811decd2 in vfs_write (file=file@entry=0xffff888004098500, buf=buf@entry=0xa758d0 ":iiiii:E::ii::i:CF
", count=count@entry=19, pos=pos@entry=0xffffc9000022ff10) at fs/read_write.c:603
13 0xffffffff811defda in ksys_write (fd=<optimized out>, buf=0xa758d0 ":iiiii:E::ii::i:CF
", count=19) at fs/read_write.c:658
14 0xffffffff81b49813 in do_syscall_64 (nr=<optimized out>, regs=0xffffc9000022ff58) at arch/x86/entry/common.c:46
15 0xffffffff81c0007c in entry_SYSCALL_64 () at arch/x86/entry/entry_64.S:120
To solve the issue, the open_exec call is moved to before the write
lock is taken by bm_register_write
Link: https://lkml.kernel.org/r/20210228224414.95962-1-liorribak@gmail.com
Fixes: 948b701a60 ("binfmt_misc: add persistent opened binary handler for containers")
Signed-off-by: Lior Ribak <liorribak@gmail.com>
Acked-by: Helge Deller <deller@gmx.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 14fbbc8297 ]
Commit b0841eefd9 ("configfs: provide exclusion between IO and removals")
uses ->frag_dead to mark the fragment state, thus no bothering with extra
refcount on config_item when opening a file. The configfs_get_config_item
was removed in __configfs_open_file, but not with config_item_put. So the
refcount on config_item will lost its balance, causing use-after-free
issues in some occasions like this:
Test:
1. Mount configfs on /config with read-only items:
drwxrwx--- 289 root root 0 2021-04-01 11:55 /config
drwxr-xr-x 2 root root 0 2021-04-01 11:54 /config/a
--w--w--w- 1 root root 4096 2021-04-01 11:53 /config/a/1.txt
......
2. Then run:
for file in /config
do
echo $file
grep -R 'key' $file
done
3. __configfs_open_file will be called in parallel, the first one
got called will do:
if (file->f_mode & FMODE_READ) {
if (!(inode->i_mode & S_IRUGO))
goto out_put_module;
config_item_put(buffer->item);
kref_put()
package_details_release()
kfree()
the other one will run into use-after-free issues like this:
BUG: KASAN: use-after-free in __configfs_open_file+0x1bc/0x3b0
Read of size 8 at addr fffffff155f02480 by task grep/13096
CPU: 0 PID: 13096 Comm: grep VIP: 00 Tainted: G W 4.14.116-kasan #1
TGID: 13096 Comm: grep
Call trace:
dump_stack+0x118/0x160
kasan_report+0x22c/0x294
__asan_load8+0x80/0x88
__configfs_open_file+0x1bc/0x3b0
configfs_open_file+0x28/0x34
do_dentry_open+0x2cc/0x5c0
vfs_open+0x80/0xe0
path_openat+0xd8c/0x2988
do_filp_open+0x1c4/0x2fc
do_sys_open+0x23c/0x404
SyS_openat+0x38/0x48
Allocated by task 2138:
kasan_kmalloc+0xe0/0x1ac
kmem_cache_alloc_trace+0x334/0x394
packages_make_item+0x4c/0x180
configfs_mkdir+0x358/0x740
vfs_mkdir2+0x1bc/0x2e8
SyS_mkdirat+0x154/0x23c
el0_svc_naked+0x34/0x38
Freed by task 13096:
kasan_slab_free+0xb8/0x194
kfree+0x13c/0x910
package_details_release+0x524/0x56c
kref_put+0xc4/0x104
config_item_put+0x24/0x34
__configfs_open_file+0x35c/0x3b0
configfs_open_file+0x28/0x34
do_dentry_open+0x2cc/0x5c0
vfs_open+0x80/0xe0
path_openat+0xd8c/0x2988
do_filp_open+0x1c4/0x2fc
do_sys_open+0x23c/0x404
SyS_openat+0x38/0x48
el0_svc_naked+0x34/0x38
To fix this issue, remove the config_item_put in
__configfs_open_file to balance the refcount of config_item.
Fixes: b0841eefd9 ("configfs: provide exclusion between IO and removals")
Signed-off-by: Daiyue Zhang <zhangdaiyue1@huawei.com>
Signed-off-by: Yi Chen <chenyi77@huawei.com>
Signed-off-by: Ge Qiu <qiuge@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 53cb245454 ]
An xattr 'get' handler is expected to return the length of the value on
success, yet _nfs4_get_security_label() (and consequently also
nfs4_xattr_get_nfs4_label(), which is used as an xattr handler) returns
just 0 on success.
Fix this by returning label.len instead, which contains the length of
the result.
Fixes: aa9c266962 ("NFS: Client implementation of Labeled-NFS")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Reviewed-by: James Morris <jamorris@linux.microsoft.com>
Reviewed-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 47397915ed ]
The fact that the lookup revalidation failed, does not mean that the
inode contents have changed.
Fixes: 5ceb9d7fda ("NFS: Refactor nfs_lookup_revalidate()")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 82e7ca1334 ]
There should be no reason to expect the directory permissions to change
just because the directory contents changed or a negative lookup timed
out. So let's avoid doing a full call to nfs_mark_for_revalidate() in
that case.
Furthermore, if this is a negative dentry, and we haven't actually done
a new lookup, then we have no reason yet to believe the directory has
changed at all. So let's remove the gratuitous directory inode
invalidation altogether when called from
nfs_lookup_revalidate_negative().
Reported-by: Geert Jansen <gerardu@amazon.com>
Fixes: 5ceb9d7fda ("NFS: Refactor nfs_lookup_revalidate()")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 04ad69c342 upstream.
In case of interrupted syscalls, prevent sending CLOSE commands for
compound CREATE+CLOSE requests by introducing an
CIFS_CP_CREATE_CLOSE_OP flag to indicate lower layers that it should
not send a CLOSE command to the MIDs corresponding the compound
CREATE+CLOSE request.
A simple reproducer:
#!/bin/bash
mount //server/share /mnt -o username=foo,password=***
tc qdisc add dev eth0 root netem delay 450ms
stat -f /mnt &>/dev/null & pid=$!
sleep 0.01
kill $pid
tc qdisc del dev eth0 root
umount /mnt
Before patch:
...
6 0.256893470 192.168.122.2 → 192.168.122.15 SMB2 402 Create Request File: ;GetInfo Request FS_INFO/FileFsFullSizeInformation;Close Request
7 0.257144491 192.168.122.15 → 192.168.122.2 SMB2 498 Create Response File: ;GetInfo Response;Close Response
9 0.260798209 192.168.122.2 → 192.168.122.15 SMB2 146 Close Request File:
10 0.260841089 192.168.122.15 → 192.168.122.2 SMB2 130 Close Response, Error: STATUS_FILE_CLOSED
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
CC: <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 56887cffe9 upstream.
Commit 384d87ef2c ("block: Do not discard buffers under a mounted
filesystem") made paths issuing discard or zeroout requests to the
underlying device try to grab block device in exclusive mode. If that
failed we returned EBUSY to userspace. This however caused unexpected
fallout in userspace where e.g. FUSE filesystems issue discard requests
from userspace daemons although the device is open exclusively by the
kernel. Also shrinking of logical volume by LVM issues discard requests
to a device which may be claimed exclusively because there's another LV
on the same PV. So to avoid these userspace regressions, fall back to
invalidate_inode_pages2_range() instead of returning EBUSY to userspace
and return EBUSY only of that call fails as well (meaning that there's
indeed someone using the particular device range we are trying to
discard).
Link: https://bugzilla.kernel.org/show_bug.cgi?id=211167
Fixes: 384d87ef2c ("block: Do not discard buffers under a mounted filesystem")
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 027f14f535 ]
If we try to make any changes via the journal between when the journal
is initialized, but before the multi-block allocated is initialized,
we will end up deferencing a NULL pointer when the journal commit
callback function calls ext4_process_freed_data().
The proximate cause of this failure was commit 2d01ddc866 ("ext4:
save error info to sb through journal if available") since file system
corruption problems detected before the call to ext4_mb_init() would
result in a journal commit before we aborted the mount of the file
system.... and we would then trigger the NULL pointer deref.
Link: https://lore.kernel.org/r/YAm8qH/0oo2ofSMR@mit.edu
Reported-by: Murphy Zhou <jencce.kernel@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 63c9e47a16 ]
When extending a file, udf_do_extend_file() may enter following empty
indirect extent. At the end of udf_do_extend_file() we revert prev_epos
to point to the last written extent. However if we end up not adding any
further extent in udf_do_extend_file(), the reverting points prev_epos
into the header area of the AED and following updates of the extents
(in udf_update_extents()) will corrupt the header.
Make sure that we do not follow indirect extent if we are not going to
add any more extents so that returning back to the last written extent
works correctly.
Link: https://lore.kernel.org/r/20210107234116.6190-2-magnani@ieee.org
Signed-off-by: Steven J. Magnani <magnani@ieee.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a249cc8bc2 upstream.
With multichannel, operations like the queries
from "ls -lR" can cause all credits to be used and
errors to be returned since max_credits was not
being set correctly on the secondary channels and
thus the client was requesting 0 credits incorrectly
in some cases (which can lead to not having
enough credits to perform any operation on that
channel).
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
CC: <stable@vger.kernel.org> # v5.8+
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 14302ee330 upstream.
In cifs_statfs(), if server->ops->queryfs is not NULL, then we should
use its return value rather than always returning 0. Instead, use rc
variable as it is properly set to 0 in case there is no
server->ops->queryfs.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ee2e3f5062 upstream.
Creating a series of detached mounts, attaching them to the filesystem,
and unmounting them can be used to trigger an integer overflow in
ns->mounts causing the kernel to block any new mounts in count_mounts()
and returning ENOSPC because it falsely assumes that the maximum number
of mounts in the mount namespace has been reached, i.e. it thinks it
can't fit the new mounts into the mount namespace anymore.
Depending on the number of mounts in your system, this can be reproduced
on any kernel that supportes open_tree() and move_mount() by compiling
and running the following program:
/* SPDX-License-Identifier: LGPL-2.1+ */
#define _GNU_SOURCE
#include <errno.h>
#include <fcntl.h>
#include <getopt.h>
#include <limits.h>
#include <stdbool.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sys/mount.h>
#include <sys/stat.h>
#include <sys/syscall.h>
#include <sys/types.h>
#include <unistd.h>
/* open_tree() */
#ifndef OPEN_TREE_CLONE
#define OPEN_TREE_CLONE 1
#endif
#ifndef OPEN_TREE_CLOEXEC
#define OPEN_TREE_CLOEXEC O_CLOEXEC
#endif
#ifndef __NR_open_tree
#if defined __alpha__
#define __NR_open_tree 538
#elif defined _MIPS_SIM
#if _MIPS_SIM == _MIPS_SIM_ABI32 /* o32 */
#define __NR_open_tree 4428
#endif
#if _MIPS_SIM == _MIPS_SIM_NABI32 /* n32 */
#define __NR_open_tree 6428
#endif
#if _MIPS_SIM == _MIPS_SIM_ABI64 /* n64 */
#define __NR_open_tree 5428
#endif
#elif defined __ia64__
#define __NR_open_tree (428 + 1024)
#else
#define __NR_open_tree 428
#endif
#endif
/* move_mount() */
#ifndef MOVE_MOUNT_F_EMPTY_PATH
#define MOVE_MOUNT_F_EMPTY_PATH 0x00000004 /* Empty from path permitted */
#endif
#ifndef __NR_move_mount
#if defined __alpha__
#define __NR_move_mount 539
#elif defined _MIPS_SIM
#if _MIPS_SIM == _MIPS_SIM_ABI32 /* o32 */
#define __NR_move_mount 4429
#endif
#if _MIPS_SIM == _MIPS_SIM_NABI32 /* n32 */
#define __NR_move_mount 6429
#endif
#if _MIPS_SIM == _MIPS_SIM_ABI64 /* n64 */
#define __NR_move_mount 5429
#endif
#elif defined __ia64__
#define __NR_move_mount (428 + 1024)
#else
#define __NR_move_mount 429
#endif
#endif
static inline int sys_open_tree(int dfd, const char *filename, unsigned int flags)
{
return syscall(__NR_open_tree, dfd, filename, flags);
}
static inline int sys_move_mount(int from_dfd, const char *from_pathname, int to_dfd,
const char *to_pathname, unsigned int flags)
{
return syscall(__NR_move_mount, from_dfd, from_pathname, to_dfd, to_pathname, flags);
}
static bool is_shared_mountpoint(const char *path)
{
bool shared = false;
FILE *f = NULL;
char *line = NULL;
int i;
size_t len = 0;
f = fopen("/proc/self/mountinfo", "re");
if (!f)
return 0;
while (getline(&line, &len, f) > 0) {
char *slider1, *slider2;
for (slider1 = line, i = 0; slider1 && i < 4; i++)
slider1 = strchr(slider1 + 1, ' ');
if (!slider1)
continue;
slider2 = strchr(slider1 + 1, ' ');
if (!slider2)
continue;
*slider2 = '\0';
if (strcmp(slider1 + 1, path) == 0) {
/* This is the path. Is it shared? */
slider1 = strchr(slider2 + 1, ' ');
if (slider1 && strstr(slider1, "shared:")) {
shared = true;
break;
}
}
}
fclose(f);
free(line);
return shared;
}
static void usage(void)
{
const char *text = "mount-new [--recursive] <base-dir>\n";
fprintf(stderr, "%s", text);
_exit(EXIT_SUCCESS);
}
#define exit_usage(format, ...) \
({ \
fprintf(stderr, format "\n", ##__VA_ARGS__); \
usage(); \
})
#define exit_log(format, ...) \
({ \
fprintf(stderr, format "\n", ##__VA_ARGS__); \
exit(EXIT_FAILURE); \
})
static const struct option longopts[] = {
{"help", no_argument, 0, 'a'},
{ NULL, no_argument, 0, 0 },
};
int main(int argc, char *argv[])
{
int exit_code = EXIT_SUCCESS, index = 0;
int dfd, fd_tree, new_argc, ret;
char *base_dir;
char *const *new_argv;
char target[PATH_MAX];
while ((ret = getopt_long_only(argc, argv, "", longopts, &index)) != -1) {
switch (ret) {
case 'a':
/* fallthrough */
default:
usage();
}
}
new_argv = &argv[optind];
new_argc = argc - optind;
if (new_argc < 1)
exit_usage("Missing base directory\n");
base_dir = new_argv[0];
if (*base_dir != '/')
exit_log("Please specify an absolute path");
/* Ensure that target is a shared mountpoint. */
if (!is_shared_mountpoint(base_dir))
exit_log("Please ensure that \"%s\" is a shared mountpoint", base_dir);
dfd = open(base_dir, O_RDONLY | O_DIRECTORY | O_CLOEXEC);
if (dfd < 0)
exit_log("%m - Failed to open base directory \"%s\"", base_dir);
ret = mkdirat(dfd, "detached-move-mount", 0755);
if (ret < 0)
exit_log("%m - Failed to create required temporary directories");
ret = snprintf(target, sizeof(target), "%s/detached-move-mount", base_dir);
if (ret < 0 || (size_t)ret >= sizeof(target))
exit_log("%m - Failed to assemble target path");
/*
* Having a mount table with 10000 mounts is already quite excessive
* and shoult account even for weird test systems.
*/
for (size_t i = 0; i < 10000; i++) {
fd_tree = sys_open_tree(dfd, "detached-move-mount",
OPEN_TREE_CLONE |
OPEN_TREE_CLOEXEC |
AT_EMPTY_PATH);
if (fd_tree < 0) {
fprintf(stderr, "%m - Failed to open %d(detached-move-mount)", dfd);
exit_code = EXIT_FAILURE;
break;
}
ret = sys_move_mount(fd_tree, "", dfd, "detached-move-mount", MOVE_MOUNT_F_EMPTY_PATH);
if (ret < 0) {
if (errno == ENOSPC)
fprintf(stderr, "%m - Buggy mount counting");
else
fprintf(stderr, "%m - Failed to attach mount to %d(detached-move-mount)", dfd);
exit_code = EXIT_FAILURE;
break;
}
close(fd_tree);
ret = umount2(target, MNT_DETACH);
if (ret < 0) {
fprintf(stderr, "%m - Failed to unmount %s", target);
exit_code = EXIT_FAILURE;
break;
}
}
(void)unlinkat(dfd, "detached-move-mount", AT_REMOVEDIR);
close(dfd);
exit(exit_code);
}
and wait for the kernel to refuse any new mounts by returning ENOSPC.
How many iterations are needed depends on the number of mounts in your
system. Assuming you have something like 50 mounts on a standard system
it should be almost instantaneous.
The root cause of this is that detached mounts aren't handled correctly
when source and target mount are identical and reside on a shared mount
causing a broken mount tree where the detached source itself is
propagated which propagation prevents for regular bind-mounts and new
mounts. This ultimately leads to a miscalculation of the number of
mounts in the mount namespace.
Detached mounts created via
open_tree(fd, path, OPEN_TREE_CLONE)
are essentially like an unattached new mount, or an unattached
bind-mount. They can then later on be attached to the filesystem via
move_mount() which calls into attach_recursive_mount(). Part of
attaching it to the filesystem is making sure that mounts get correctly
propagated in case the destination mountpoint is MS_SHARED, i.e. is a
shared mountpoint. This is done by calling into propagate_mnt() which
walks the list of peers calling propagate_one() on each mount in this
list making sure it receives the propagation event.
The propagate_one() functions thereby skips both new mounts and bind
mounts to not propagate them "into themselves". Both are identified by
checking whether the mount is already attached to any mount namespace in
mnt->mnt_ns. The is what the IS_MNT_NEW() helper is responsible for.
However, detached mounts have an anonymous mount namespace attached to
them stashed in mnt->mnt_ns which means that IS_MNT_NEW() doesn't
realize they need to be skipped causing the mount to propagate "into
itself" breaking the mount table and causing a disconnect between the
number of mounts recorded as being beneath or reachable from the target
mountpoint and the number of mounts actually recorded/counted in
ns->mounts ultimately causing an overflow which in turn prevents any new
mounts via the ENOSPC issue.
So teach propagation to handle detached mounts by making it aware of
them. I've been tracking this issue down for the last couple of days and
then verifying that the fix is correct by
unmounting everything in my current mount table leaving only /proc and
/sys mounted and running the reproducer above overnight verifying the
number of mounts counted in ns->mounts. With this fix the counts are
correct and the ENOSPC issue can't be reproduced.
This change will only have an effect on mounts created with the new
mount API since detached mounts cannot be created with the old mount API
so regressions are extremely unlikely.
Link: https://lore.kernel.org/r/20210306101010.243666-1-christian.brauner@ubuntu.com
Fixes: 2db154b3ea ("vfs: syscall: Add move_mount(2) to move mounts around")
Cc: David Howells <dhowells@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: linux-fsdevel@vger.kernel.org
Cc: <stable@vger.kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4d14c5cde5 upstream
Calling btrfs_qgroup_reserve_meta_prealloc from
btrfs_delayed_inode_reserve_metadata can result in flushing delalloc
while holding a transaction and delayed node locks. This is deadlock
prone. In the past multiple commits:
* ae5e070eac ("btrfs: qgroup: don't try to wait flushing if we're
already holding a transaction")
* 6f23277a49 ("btrfs: qgroup: don't commit transaction when we already
hold the handle")
Tried to solve various aspects of this but this was always a
whack-a-mole game. Unfortunately those 2 fixes don't solve a deadlock
scenario involving btrfs_delayed_node::mutex. Namely, one thread
can call btrfs_dirty_inode as a result of reading a file and modifying
its atime:
PID: 6963 TASK: ffff8c7f3f94c000 CPU: 2 COMMAND: "test"
#0 __schedule at ffffffffa529e07d
#1 schedule at ffffffffa529e4ff
#2 schedule_timeout at ffffffffa52a1bdd
#3 wait_for_completion at ffffffffa529eeea <-- sleeps with delayed node mutex held
#4 start_delalloc_inodes at ffffffffc0380db5
#5 btrfs_start_delalloc_snapshot at ffffffffc0393836
#6 try_flush_qgroup at ffffffffc03f04b2
#7 __btrfs_qgroup_reserve_meta at ffffffffc03f5bb6 <-- tries to reserve space and starts delalloc inodes.
#8 btrfs_delayed_update_inode at ffffffffc03e31aa <-- acquires delayed node mutex
#9 btrfs_update_inode at ffffffffc0385ba8
#10 btrfs_dirty_inode at ffffffffc038627b <-- TRANSACTIION OPENED
#11 touch_atime at ffffffffa4cf0000
#12 generic_file_read_iter at ffffffffa4c1f123
#13 new_sync_read at ffffffffa4ccdc8a
#14 vfs_read at ffffffffa4cd0849
#15 ksys_read at ffffffffa4cd0bd1
#16 do_syscall_64 at ffffffffa4a052eb
#17 entry_SYSCALL_64_after_hwframe at ffffffffa540008c
This will cause an asynchronous work to flush the delalloc inodes to
happen which can try to acquire the same delayed_node mutex:
PID: 455 TASK: ffff8c8085fa4000 CPU: 5 COMMAND: "kworker/u16:30"
#0 __schedule at ffffffffa529e07d
#1 schedule at ffffffffa529e4ff
#2 schedule_preempt_disabled at ffffffffa529e80a
#3 __mutex_lock at ffffffffa529fdcb <-- goes to sleep, never wakes up.
#4 btrfs_delayed_update_inode at ffffffffc03e3143 <-- tries to acquire the mutex
#5 btrfs_update_inode at ffffffffc0385ba8 <-- this is the same inode that pid 6963 is holding
#6 cow_file_range_inline.constprop.78 at ffffffffc0386be7
#7 cow_file_range at ffffffffc03879c1
#8 btrfs_run_delalloc_range at ffffffffc038894c
#9 writepage_delalloc at ffffffffc03a3c8f
#10 __extent_writepage at ffffffffc03a4c01
#11 extent_write_cache_pages at ffffffffc03a500b
#12 extent_writepages at ffffffffc03a6de2
#13 do_writepages at ffffffffa4c277eb
#14 __filemap_fdatawrite_range at ffffffffa4c1e5bb
#15 btrfs_run_delalloc_work at ffffffffc0380987 <-- starts running delayed nodes
#16 normal_work_helper at ffffffffc03b706c
#17 process_one_work at ffffffffa4aba4e4
#18 worker_thread at ffffffffa4aba6fd
#19 kthread at ffffffffa4ac0a3d
#20 ret_from_fork at ffffffffa54001ff
To fully address those cases the complete fix is to never issue any
flushing while holding the transaction or the delayed node lock. This
patch achieves it by calling qgroup_reserve_meta directly which will
either succeed without flushing or will fail and return -EDQUOT. In the
latter case that return value is going to be propagated to
btrfs_dirty_inode which will fallback to start a new transaction. That's
fine as the majority of time we expect the inode will have
BTRFS_DELAYED_NODE_INODE_DIRTY flag set which will result in directly
copying the in-memory state.
Fixes: c53e965360 ("btrfs: qgroup: try to flush qgroup space when we get -EDQUOT")
CC: stable@vger.kernel.org # 5.10+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[sudip: adjust context]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fd57a98d6f upstream.
When we have smack enabled, during the creation of a directory smack may
attempt to add a "smack transmute" xattr on the inode, which results in
the following warning and trace:
WARNING: CPU: 3 PID: 2548 at fs/btrfs/transaction.c:537 start_transaction+0x489/0x4f0
Modules linked in: nft_objref nf_conntrack_netbios_ns (...)
CPU: 3 PID: 2548 Comm: mkdir Not tainted 5.9.0-rc2smack+ #81
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
RIP: 0010:start_transaction+0x489/0x4f0
Code: e9 be fc ff ff (...)
RSP: 0018:ffffc90001887d10 EFLAGS: 00010202
RAX: ffff88816f1e0000 RBX: 0000000000000201 RCX: 0000000000000003
RDX: 0000000000000201 RSI: 0000000000000002 RDI: ffff888177849000
RBP: ffff888177849000 R08: 0000000000000001 R09: 0000000000000004
R10: ffffffff825e8f7a R11: 0000000000000003 R12: ffffffffffffffe2
R13: 0000000000000000 R14: ffff88803d884270 R15: ffff8881680d8000
FS: 00007f67317b8440(0000) GS:ffff88817bcc0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f67247a22a8 CR3: 000000004bfbc002 CR4: 0000000000370ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
? slab_free_freelist_hook+0xea/0x1b0
? trace_hardirqs_on+0x1c/0xe0
btrfs_setxattr_trans+0x3c/0xf0
__vfs_setxattr+0x63/0x80
smack_d_instantiate+0x2d3/0x360
security_d_instantiate+0x29/0x40
d_instantiate_new+0x38/0x90
btrfs_mkdir+0x1cf/0x1e0
vfs_mkdir+0x14f/0x200
do_mkdirat+0x6d/0x110
do_syscall_64+0x2d/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f673196ae6b
Code: 8b 05 11 (...)
RSP: 002b:00007ffc3c679b18 EFLAGS: 00000246 ORIG_RAX: 0000000000000053
RAX: ffffffffffffffda RBX: 00000000000001ff RCX: 00007f673196ae6b
RDX: 0000000000000000 RSI: 00000000000001ff RDI: 00007ffc3c67a30d
RBP: 00007ffc3c67a30d R08: 00000000000001ff R09: 0000000000000000
R10: 000055d3e39fe930 R11: 0000000000000246 R12: 0000000000000000
R13: 00007ffc3c679cd8 R14: 00007ffc3c67a30d R15: 00007ffc3c679ce0
irq event stamp: 11029
hardirqs last enabled at (11037): [<ffffffff81153fe6>] console_unlock+0x486/0x670
hardirqs last disabled at (11044): [<ffffffff81153c01>] console_unlock+0xa1/0x670
softirqs last enabled at (8864): [<ffffffff81e0102f>] asm_call_on_stack+0xf/0x20
softirqs last disabled at (8851): [<ffffffff81e0102f>] asm_call_on_stack+0xf/0x20
This happens because at btrfs_mkdir() we call d_instantiate_new() while
holding a transaction handle, which results in the following call chain:
btrfs_mkdir()
trans = btrfs_start_transaction(root, 5);
d_instantiate_new()
smack_d_instantiate()
__vfs_setxattr()
btrfs_setxattr_trans()
btrfs_start_transaction()
start_transaction()
WARN_ON()
--> a tansaction start has TRANS_EXTWRITERS
set in its type
h->orig_rsv = h->block_rsv
h->block_rsv = NULL
btrfs_end_transaction(trans)
Besides the warning triggered at start_transaction, we set the handle's
block_rsv to NULL which may cause some surprises later on.
So fix this by making btrfs_setxattr_trans() not start a transaction when
we already have a handle on one, stored in current->journal_info, and use
that handle. We are good to use the handle because at btrfs_mkdir() we did
reserve space for the xattr and the inode item.
Reported-by: Casey Schaufler <casey@schaufler-ca.com>
CC: stable@vger.kernel.org # 5.4+
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Tested-by: Casey Schaufler <casey@schaufler-ca.com>
Link: https://lore.kernel.org/linux-btrfs/434d856f-bd7b-4889-a6ec-e81aaebfa735@schaufler-ca.com/
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4f6a49de64 upstream.
If btrfs_qgroup_reserve_data returns an error (i.e quota limit reached)
the handling logic directly goes to the 'out' label without first
unlocking the extent range between lockstart, lockend. This results in
deadlocks as other processes try to lock the same extent.
Fixes: a7f8b1c2ac ("btrfs: file: reserve qgroup space after the hole punch range is locked")
CC: stable@vger.kernel.org # 5.10+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0f9c03d824 upstream.
Following commit f218ea6c47 ("btrfs: delayed-inode: Remove wrong
qgroup meta reservation calls") this function now reserves num_bytes,
rather than the fixed amount of nodesize. As such this requires the
same amount to be freed in case of failure. Fix this by adjusting
the amount we are freeing.
Fixes: f218ea6c47 ("btrfs: delayed-inode: Remove wrong qgroup meta reservation calls")
CC: stable@vger.kernel.org # 4.19+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5011c5a663 upstream.
The problem is we're copying "inherit" from user space but we don't
necessarily know that we're copying enough data for a 64 byte
struct. Then the next problem is that 'inherit' has a variable size
array at the end, and we have to verify that array is the size we
expected.
Fixes: 6f72c7e20d ("Btrfs: add qgroup inheritance")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3c17916510 upstream.
During allocation the allocator will try to allocate an extent using
cluster policy. Once the current cluster is exhausted it will remove the
entry under btrfs_free_cluster::lock and subsequently acquire
btrfs_free_space_ctl::tree_lock to dispose of the already-deleted entry
and adjust btrfs_free_space_ctl::total_bitmap. This poses a problem
because there exists a race condition between removing the entry under
one lock and doing the necessary accounting holding a different lock
since extent freeing only uses the 2nd lock. This can result in the
following situation:
T1: T2:
btrfs_alloc_from_cluster insert_into_bitmap <holds tree_lock>
if (entry->bytes == 0) if (block_group && !list_empty(&block_group->cluster_list)) {
rb_erase(entry)
spin_unlock(&cluster->lock);
(total_bitmaps is still 4) spin_lock(&cluster->lock);
<doesn't find entry in cluster->root>
spin_lock(&ctl->tree_lock); <goes to new_bitmap label, adds
<blocked since T2 holds tree_lock> <a new entry and calls add_new_bitmap>
recalculate_thresholds <crashes,
due to total_bitmaps
becoming 5 and triggering
an ASSERT>
To fix this ensure that once depleted, the cluster entry is deleted when
both cluster lock and tree locks are held in the allocator (T1), this
ensures that even if there is a race with a concurrent
insert_into_bitmap call it will correctly find the entry in the cluster
and add the new space to it.
CC: <stable@vger.kernel.org> # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3660d0bcdb upstream.
When using the NO_HOLES feature, if we clone a file range that spans only
a hole into a range that is at or beyond the current i_size of the
destination file, we end up not setting the full sync runtime flag on the
inode. As a result, if we then fsync the destination file and have a power
failure, after log replay we can end up exposing stale data instead of
having a hole for that range.
The conditions for this to happen are the following:
1) We have a file with a size of, for example, 1280K;
2) There is a written (non-prealloc) extent for the file range from 1024K
to 1280K with a length of 256K;
3) This particular file extent layout is durably persisted, so that the
existing superblock persisted on disk points to a subvolume root where
the file has that exact file extent layout and state;
4) The file is truncated to a smaller size, to an offset lower than the
start offset of its last extent, for example to 800K. The truncate sets
the full sync runtime flag on the inode;
6) Fsync the file to log it and clear the full sync runtime flag;
7) Clone a region that covers only a hole (implicit hole due to NO_HOLES)
into the file with a destination offset that starts at or beyond the
256K file extent item we had - for example to offset 1024K;
8) Since the clone operation does not find extents in the source range,
we end up in the if branch at the bottom of btrfs_clone() where we
punch a hole for the file range starting at offset 1024K by calling
btrfs_replace_file_extents(). There we end up not setting the full
sync flag on the inode, because we don't know we are being called in
a clone context (and not fallocate's punch hole operation), and
neither do we create an extent map to represent a hole because the
requested range is beyond eof;
9) A further fsync to the file will be a fast fsync, since the clone
operation did not set the full sync flag, and therefore it relies on
modified extent maps to correctly log the file layout. But since
it does not find any extent map marking the range from 1024K (the
previous eof) to the new eof, it does not log a file extent item
for that range representing the hole;
10) After a power failure no hole for the range starting at 1024K is
punched and we end up exposing stale data from the old 256K extent.
Turning this into exact steps:
$ mkfs.btrfs -f -O no-holes /dev/sdi
$ mount /dev/sdi /mnt
# Create our test file with 3 extents of 256K and a 256K hole at offset
# 256K. The file has a size of 1280K.
$ xfs_io -f -s \
-c "pwrite -S 0xab -b 256K 0 256K" \
-c "pwrite -S 0xcd -b 256K 512K 256K" \
-c "pwrite -S 0xef -b 256K 768K 256K" \
-c "pwrite -S 0x73 -b 256K 1024K 256K" \
/mnt/sdi/foobar
# Make sure it's durably persisted. We want the last committed super
# block to point to this particular file extent layout.
sync
# Now truncate our file to a smaller size, falling within a position of
# the second extent. This sets the full sync runtime flag on the inode.
# Then fsync the file to log it and clear the full sync flag from the
# inode. The third extent is no longer part of the file and therefore
# it is not logged.
$ xfs_io -c "truncate 800K" -c "fsync" /mnt/foobar
# Now do a clone operation that only clones the hole and sets back the
# file size to match the size it had before the truncate operation
# (1280K).
$ xfs_io \
-c "reflink /mnt/foobar 256K 1024K 256K" \
-c "fsync" \
/mnt/foobar
# File data before power failure:
$ od -A d -t x1 /mnt/foobar
0000000 ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab
*
0262144 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*
0524288 cd cd cd cd cd cd cd cd cd cd cd cd cd cd cd cd
*
0786432 ef ef ef ef ef ef ef ef ef ef ef ef ef ef ef ef
*
0819200 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*
1310720
<power fail>
# Mount the fs again to replay the log tree.
$ mount /dev/sdi /mnt
# File data after power failure:
$ od -A d -t x1 /mnt/foobar
0000000 ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab
*
0262144 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*
0524288 cd cd cd cd cd cd cd cd cd cd cd cd cd cd cd cd
*
0786432 ef ef ef ef ef ef ef ef ef ef ef ef ef ef ef ef
*
0819200 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*
1048576 73 73 73 73 73 73 73 73 73 73 73 73 73 73 73 73
*
1310720
The range from 1024K to 1280K should correspond to a hole but instead it
points to stale data, to the 256K extent that should not exist after the
truncate operation.
The issue does not exists when not using NO_HOLES, because for that case
we use file extent items to represent holes, these are found and copied
during the loop that iterates over extents at btrfs_clone(), and that
causes btrfs_replace_file_extents() to be called with a non-NULL
extent_info argument and therefore set the full sync runtime flag on the
inode.
So fix this by making the code that deals with a trailing hole during
cloning, at btrfs_clone(), to set the full sync flag on the inode, if the
range starts at or beyond the current i_size.
A test case for fstests will follow soon.
Backporting notes: for kernel 5.4 the change goes to ioctl.c into
btrfs_clone before the last call to btrfs_punch_hole_range.
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dd0734f2a8 upstream.
When creating a snapshot we check if the current number of swap files, in
the root, is non-zero, and if it is, we error out and warn that we can not
create the snapshot because there are active swap files.
However this is racy because when a task started activation of a swap
file, another task might have started already snapshot creation and might
have seen the counter for the number of swap files as zero. This means
that after the swap file is activated we may end up with a snapshot of the
same root successfully created, and therefore when the first write to the
swap file happens it has to fall back into COW mode, which should never
happen for active swap files.
Basically what can happen is:
1) Task A starts snapshot creation and enters ioctl.c:create_snapshot().
There it sees that root->nr_swapfiles has a value of 0 so it continues;
2) Task B enters btrfs_swap_activate(). It is not aware that another task
started snapshot creation but it did not finish yet. It increments
root->nr_swapfiles from 0 to 1;
3) Task B checks that the file meets all requirements to be an active
swap file - it has NOCOW set, there are no snapshots for the inode's
root at the moment, no file holes, no reflinked extents, etc;
4) Task B returns success and now the file is an active swap file;
5) Task A commits the transaction to create the snapshot and finishes.
The swap file's extents are now shared between the original root and
the snapshot;
6) A write into an extent of the swap file is attempted - there is a
snapshot of the file's root, so we fall back to COW mode and therefore
the physical location of the extent changes on disk.
So fix this by taking the snapshot lock during swap file activation before
locking the extent range, as that is the order in which we lock these
during buffered writes.
Fixes: ed46ff3d42 ("Btrfs: support swap files")
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 195a49eaf6 upstream.
When we active a swap file, at btrfs_swap_activate(), we acquire the
exclusive operation lock to prevent the physical location of the swap
file extents to be changed by operations such as balance and device
replace/resize/remove. We also call there can_nocow_extent() which,
among other things, checks if the block group of a swap file extent is
currently RO, and if it is we can not use the extent, since a write
into it would result in COWing the extent.
However we have no protection against a scrub operation running after we
activate the swap file, which can result in the swap file extents to be
COWed while the scrub is running and operating on the respective block
group, because scrub turns a block group into RO before it processes it
and then back again to RW mode after processing it. That means an attempt
to write into a swap file extent while scrub is processing the respective
block group, will result in COWing the extent, changing its physical
location on disk.
Fix this by making sure that block groups that have extents that are used
by active swap files can not be turned into RO mode, therefore making it
not possible for a scrub to turn them into RO mode. When a scrub finds a
block group that can not be turned to RO due to the existence of extents
used by swap files, it proceeds to the next block group and logs a warning
message that mentions the block group was skipped due to active swap
files - this is the same approach we currently use for balance.
Fixes: ed46ff3d42 ("Btrfs: support swap files")
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d70cef0d46 upstream.
When a qstripe is required an extra page is allocated and mapped. There
were 3 problems:
1) There is no corresponding call of kunmap() for the qstripe page.
2) There is no reason to map the qstripe page more than once if the
number of bits set in rbio->dbitmap is greater than one.
3) There is no reason to map the parity page and unmap it each time
through the loop.
The page memory can continue to be reused with a single mapping on each
iteration by raid6_call.gen_syndrome() without remapping. So map the
page for the duration of the loop.
Similarly, improve the algorithm by mapping the parity page just 1 time.
Fixes: 5a6ac9eacb ("Btrfs, raid56: support parity scrub on raid56")
CC: stable@vger.kernel.org # 4.4.x: c17af96554a8: btrfs: raid56: simplify tracking of Q stripe presence
CC: stable@vger.kernel.org # 4.4.x
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 95c85fba1f upstream.
It's wrong calling btrfs_put_block_group in
__btrfs_return_cluster_to_free_space if the block group passed is
different than the block group the cluster represents. As this means the
cluster doesn't have a reference to the passed block group. This results
in double put and a use-after-free bug.
Fix this by simply bailing if the block group we passed in does not
match the block group on the cluster.
Fixes: fa9c0d795f ("Btrfs: rework allocation clustering")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4f4317c13a ]
While doing error injection I would sometimes get a corrupt file system.
This is because I was injecting errors at btrfs_search_slot, but would
only do it one time per stack. This uncovered a problem in
commit_fs_roots, where if we get an error we would just break. However
we're in a nested loop, the first loop being a loop to find all the
dirty fs roots, and then subsequent root updates would succeed clearing
the error value.
This isn't likely to happen in real scenarios, however we could
potentially get a random ENOMEM once and then not again, and we'd end up
with a corrupted file system. Fix this by moving the error checking
around a bit to the main loop, as this is the only place where something
will fail, and return the error as soon as it occurs.
With this patch my reproducer no longer corrupts the file system.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e36cffed20 ]
Most callers check for non-zero return, and assume it's -ECHILD (which
it always will be). One caller uses the actual error return. Clean this
up and make it fully consistent, by having unlazy_walk() return a bool
instead. Rename it to try_to_unlazy() and return true on success, and
failure on error. That's easier to read.
No functional changes in this patch.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 88a9e03bee upstream.
An assert failure is triggered by syzkaller test due to
ATTR_KILL_PRIV is not cleared before xfs_setattr_size.
As ATTR_KILL_PRIV is not checked/used by xfs_setattr_size,
just remove it from the assert.
Signed-off-by: Yumei Huang <yuhuang@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3bef198f1b upstream.
syzbot is feeding invalid superblock data to JFS for mount testing.
JFS does not check several of the fields -- just assumes that they
are good since the JFS_MAGIC and version fields are good.
In this case (syzbot reproducer), we have s_l2bsize == 0xda0c,
pad == 0xf045, and s_state == 0x50, all of which are invalid IMO.
Having s_l2bsize == 0xda0c causes this UBSAN warning:
UBSAN: shift-out-of-bounds in fs/jfs/jfs_mount.c:373:25
shift exponent -9716 is negative
s_l2bsize can be tested for correctness. pad can be tested for non-0
and punted. s_state can be tested for its valid values and punted.
Do those 3 tests and if any of them fails, report the superblock as
invalid/corrupt and let fsck handle it.
With this patch, chkSuper() says this when JFS_DEBUG is enabled:
jfs_mount: Mount Failure: superblock is corrupt!
Mount JFS Failure: -22
jfs_mount failed w/return code = -22
The obvious problem with this method is that next week there could
be another syzbot test that uses different fields for invalid values,
this making this like a game of whack-a-mole.
syzkaller link: https://syzkaller.appspot.com/bug?extid=36315852ece4132ec193
Reported-by: syzbot+36315852ece4132ec193@syzkaller.appspotmail.com
Reported-by: kernel test robot <lkp@intel.com> # v2
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Cc: jfs-discussion@lists.sourceforge.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7009fa9cd9 upstream.
When starting an iomap write, gfs2_quota_lock_check -> gfs2_quota_lock
-> gfs2_quota_hold is called from gfs2_iomap_begin. At the end of the
write, before unlocking the quotas, punch_hole -> gfs2_quota_hold can be
called again in gfs2_iomap_end, which is incorrect and leads to a failed
assertion. Instead, move the call to gfs2_quota_unlock before the call
to punch_hole to fix that.
Fixes: 64bc06bb32 ("gfs2: iomap buffered write support")
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 834ec3e1ee upstream.
In gfs2_recover_one, fix a sd_log_flush_lock imbalance when a recovery
pass fails.
Fixes: c9ebc4b737 ("gfs2: allow journal replay to hold sd_log_flush_lock")
Cc: stable@vger.kernel.org # v5.7+
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 78178ca844 upstream.
Patch fb6791d100 was designed to allow gfs2 to unmount quicker by
skipping the step where it tells dlm to unlock glocks in EX with lvbs.
This was done because when gfs2 unmounts a file system, it destroys the
dlm lockspace shortly after it destroys the glocks so it doesn't need to
unlock them all: the unlock is implied when the lockspace is destroyed
by dlm.
However, that patch introduced a use-after-free in dlm: as part of its
normal dlm_recoverd process, it can call ls_recovery to recover dead
locks. In so doing, it can call recover_rsbs which calls recover_lvb for
any mastered rsbs. Func recover_lvb runs through the list of lkbs queued
to the given rsb (if the glock is cached but unlocked, it will still be
queued to the lkb, but in NL--Unlocked--mode) and if it has an lvb,
copies it to the rsb, thus trying to preserve the lkb. However, when
gfs2 skips the dlm unlock step, it frees the glock and its lvb, which
means dlm's function recover_lvb references the now freed lvb pointer,
copying the freed lvb memory to the rsb.
This patch changes the check in gdlm_put_lock so that it calls
dlm_unlock for all glocks that contain an lvb pointer.
Fixes: fb6791d100 ("GFS2: skip dlm_unlock calls in unmount")
Cc: stable@vger.kernel.org # v3.8+
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f5f02fde9f upstream.
If go_free is defined, function signal_our_withdraw is supposed to
synchronize on the GLF_FREEING flag of the inode glock, but it
accidentally does that on the live glock. Fix that and disambiguate
the glock variables.
Fixes: 601ef0d52e ("gfs2: Force withdraw to replay journals and wait for it to finish")
Cc: stable@vger.kernel.org # v5.7+
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b0ff4fe746 upstream.
During checkpoint=disable period, f2fs bypasses all the synchronous IOs such as
sync and fsync. So, when enabling it back, we must flush all of them in order
to keep the data persistent. Otherwise, suddern power-cut right after enabling
checkpoint will cause data loss.
Fixes: 4354994f09 ("f2fs: checkpoint disabling")
Cc: stable@vger.kernel.org
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e0fcd01510 upstream.
This patch ports commit 02b016ca7f ("ext4: enforce the immutable
flag on open files") to f2fs.
According to the chattr man page, "a file with the 'i' attribute
cannot be modified..." Historically, this was only enforced when the
file was opened, per the rest of the description, "... and the file
can not be opened in write mode".
There is general agreement that we should standardize all file systems
to prevent modifications even for files that were opened at the time
the immutable flag is set. Eventually, a change to enforce this at
the VFS layer should be landing in mainline.
Cc: stable@kernel.org
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter