[ Upstream commit 098116e7e640ba677d9e345cbee83d253c13d556 ]
If the owing socket is shutting down - e.g. the sock reference
count already dropped to 0 and only sk_wmem_alloc is keeping
the sock alive, skb_orphan_partial() becomes a no-op.
When forwarding packets over veth with GRO enabled, the above
causes refcount errors.
This change addresses the issue with a plain skb_orphan() call
in the critical scenario.
Fixes: 9adc89af72 ("net: let skb_orphan_partial wake-up waiters.")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b94cbc909f1d80378a1f541968309e5c1178c98b ]
DSA implements a bunch of 'standardized' ethtool statistics counters,
namely tx_packets, tx_bytes, rx_packets, rx_bytes. So whatever the
hardware driver returns in .get_sset_count(), we need to add 4 to that.
That is ok, except that .get_sset_count() can return a negative error
code, for example:
b53_get_sset_count
-> phy_ethtool_get_sset_count
-> return -EIO
-EIO is -5, and with 4 added to it, it becomes -1, aka -EPERM. One can
imagine that certain error codes may even become positive, although
based on code inspection I did not see instances of that.
Check the error code first, if it is negative return it as-is.
Based on a similar patch for dsa_master_get_strings from Dan Carpenter:
https://patchwork.kernel.org/project/netdevbpf/patch/YJaSe3RPgn7gKxZv@mwanda/
Fixes: 91da11f870 ("net: Distributed Switch Architecture protocol support")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bbeb18f27a ]
In smcd_alloc_dev(), if alloc_ordered_workqueue() fails, properly catch
it, clean up and return NULL to let the caller know there was a failure.
Move the call to alloc_ordered_workqueue higher in the function in order
to abort earlier without needing to unwind the call to device_initialize().
Cc: Ursula Braun <ubraun@linux.ibm.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Anirudh Rayabharam <mail@anirudhrb.com>
Link: https://lore.kernel.org/r/20210503115736.2104747-18-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5369ead83f ]
This reverts commit e183d4e414.
Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.
Upon review, this commit was found to be incorrect for the reasons
below, so it must be reverted. It will be fixed up "correctly" in a
later kernel change.
The original commit causes a memory leak and does not properly fix the
issue it claims to fix. I will send a follow-on patch to resolve this
properly.
Cc: Kangjie Lu <kjlu@umn.edu>
Cc: Ursula Braun <ubraun@linux.ibm.com>
Cc: David S. Miller <davem@davemloft.net>
Link: https://lore.kernel.org/r/20210503115736.2104747-17-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 29249eac5225429b898f278230a6ca2baa1ae154 upstream.
Maxim reported several issues when forcing a TCP transparent proxy
to use the MPTCP protocol for the inbound connections. He also
provided a clean reproducer.
The problem boils down to 'mptcp_frag_can_collapse_to()' assuming
that only MPTCP will use the given page_frag.
If others - e.g. the plain TCP protocol - allocate page fragments,
we can end-up re-using already allocated memory for mptcp_data_frag.
Fix the issue ensuring that the to-be-expanded data fragment is
located at the current page frag end.
v1 -> v2:
- added missing fixes tag (Mat)
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/178
Reported-and-tested-by: Maxim Galaganov <max@internet.ru>
Fixes: 18b683bff8 ("mptcp: queue data for mptcp level retransmission")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3812ce895047afdb78dc750a236515416e0ccded upstream.
This is a left-over of early day. A malicious peer can flood
the kernel logs with useless messages, just drop it.
Fixes: f296234c98 ("mptcp: Add handling of incoming MP_JOIN requests")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3ed0a585bfadb6bd7080f11184adbc9edcce7dbc upstream.
Another left-over. Avoid flooding dmesg with useless text,
we already have a MIB for that event.
Fixes: 648ef4b886 ("mptcp: Implement MPTCP receive path")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a269333fa5c0c8e53c92b5a28a6076a28cde3e83 upstream.
If ds->ops->get_sset_count() fails then it "count" is a negative error
code such as -EOPNOTSUPP. Because "i" is an unsigned int, the negative
error code is type promoted to a very high value and the loop will
corrupt memory until the system crashes.
Fix this by checking for error codes and changing the type of "i" to
just int.
Fixes: badf3ada60 ("net: dsa: Provide CPU port statistics to master netdev")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c07531c01d8284aedaf95708ea90e76d11af0e21 upstream.
Offloading conns could fail for multiple reasons and a hw refresh bit is
set to try to reoffload it in next sw packet.
But it could be in some cases and future points that the hw refresh bit
is not set but a refresh could succeed.
Remove the hw refresh bit and do offload refresh if requested.
There won't be a new work entry if a work is already pending
anyway as there is the hw pending bit.
Fixes: 8b3646d6e0 ("net/sched: act_ct: Support refreshing the flow table entries")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b7df21cf1b79ab7026f545e7bf837bd5750ac026 upstream.
It's not a good idea to append the frag skb to a skb's frag_list if
the frag_list already has skbs from elsewhere, such as this skb was
created by pskb_copy() where the frag_list was cloned (all the skbs
in it were skb_get'ed) and shared by multiple skbs.
However, the new appended frag skb should have been only seen by the
current skb. Otherwise, it will cause use after free crashes as this
appended frag skb are seen by multiple skbs but it only got skb_get
called once.
The same thing happens with a skb updated by pskb_may_pull() with a
skb_cloned skb. Li Shuang has reported quite a few crashes caused
by this when doing testing over macvlan devices:
[] kernel BUG at net/core/skbuff.c:1970!
[] Call Trace:
[] skb_clone+0x4d/0xb0
[] macvlan_broadcast+0xd8/0x160 [macvlan]
[] macvlan_process_broadcast+0x148/0x150 [macvlan]
[] process_one_work+0x1a7/0x360
[] worker_thread+0x30/0x390
[] kernel BUG at mm/usercopy.c:102!
[] Call Trace:
[] __check_heap_object+0xd3/0x100
[] __check_object_size+0xff/0x16b
[] simple_copy_to_iter+0x1c/0x30
[] __skb_datagram_iter+0x7d/0x310
[] __skb_datagram_iter+0x2a5/0x310
[] skb_copy_datagram_iter+0x3b/0x90
[] tipc_recvmsg+0x14a/0x3a0 [tipc]
[] ____sys_recvmsg+0x91/0x150
[] ___sys_recvmsg+0x7b/0xc0
[] kernel BUG at mm/slub.c:305!
[] Call Trace:
[] <IRQ>
[] kmem_cache_free+0x3ff/0x400
[] __netif_receive_skb_core+0x12c/0xc40
[] ? kmem_cache_alloc+0x12e/0x270
[] netif_receive_skb_internal+0x3d/0xb0
[] ? get_rx_page_info+0x8e/0xa0 [be2net]
[] be_poll+0x6ef/0xd00 [be2net]
[] ? irq_exit+0x4f/0x100
[] net_rx_action+0x149/0x3b0
...
This patch is to fix it by linearizing the head skb if it has frag_list
set in tipc_buf_append(). Note that we choose to do this before calling
skb_unshare(), as __skb_linearize() will avoid skb_copy(). Also, we can
not just drop the frag_list either as the early time.
Fixes: 45c8b7b175 ("tipc: allow non-linear first fragment buffer")
Reported-by: Li Shuang <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 04c26faa51d1e2fe71cf13c45791f5174c37f986 upstream.
On some host, a crash could be triggered simply by repeating these
commands several times:
# modprobe tipc
# tipc bearer enable media udp name UDP1 localip 127.0.0.1
# rmmod tipc
[] BUG: unable to handle kernel paging request at ffffffffc096bb00
[] Workqueue: events 0xffffffffc096bb00
[] Call Trace:
[] ? process_one_work+0x1a7/0x360
[] ? worker_thread+0x30/0x390
[] ? create_worker+0x1a0/0x1a0
[] ? kthread+0x116/0x130
[] ? kthread_flush_work_fn+0x10/0x10
[] ? ret_from_fork+0x35/0x40
When removing the TIPC module, the UDP tunnel sock will be delayed to
release in a work queue as sock_release() can't be done in rtnl_lock().
If the work queue is schedule to run after the TIPC module is removed,
kernel will crash as the work queue function cleanup_beareri() code no
longer exists when trying to invoke it.
To fix it, this patch introduce a member wq_count in tipc_net to track
the numbers of work queues in schedule, and wait and exit until all
work queues are done in tipc_exit_net().
Fixes: d0f91938be ("tipc: add ip/udp media type")
Reported-by: Shuang Li <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 75016891357a628d2b8acc09e2b9b2576c18d318 upstream.
This reverts commit 6bf24dc0cc.
Above fix is not correct and caused memory leak issue.
Fixes: 6bf24dc0cc ("net:tipc: Fix a double free in tipc_sk_mcast_rcv")
Acked-by: Jon Maloy <jmaloy@redhat.com>
Acked-by: Tung Nguyen <tung.q.nguyen@dektech.com.au>
Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e877a88d1f069edced4160792f42c2a8e2dba942 upstream.
If sunrpc.tcp_max_slot_table_entries is small and there are tasks
on the backlog queue, then when a request completes it is freed and the
first task on the queue is woken. The expectation is that it will wake
and claim that request. However if it was a sync task and the waiting
process was killed at just that moment, it will wake and NOT claim the
request.
As long as TASK_CONGESTED remains set, requests can only be claimed by
tasks woken from the backlog, and they are woken only as requests are
freed, so when a task doesn't claim a request, no other task can ever
get that request until TASK_CONGESTED is cleared. Each time this
happens the number of available requests is decreased by one.
With a sufficiently high workload and sufficiently low setting of
max_slot (16 in the case where this was seen), TASK_CONGESTED can remain
set for an extended period, and the above scenario (of a process being
killed just as its task was woken) can repeat until no requests can be
allocated. Then traffic stops.
This patch addresses the problem by introducing a positive handover of a
request from a completing task to a backlog task - the request is never
freed when there is a backlog.
When a task is woken it might not already have a request attached in
which case it is *not* freed (as with current code) but is initialised
(if needed) and used. If it isn't used it will eventually be freed by
rpc_exit_task(). xprt_release() is enhanced to be able to correctly
release an uninitialised request.
Fixes: ba60eb25ff ("SUNRPC: Fix a livelock problem in the xprt->backlog queue")
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8da3a0b87f4f1c3a3bbc4bfb78cf68476e97d183 upstream.
When cmtp_attach_device fails, cmtp_add_connection returns the error value
which leads to the caller to doing fput through sockfd_put. But
cmtp_session kthread, which is stopped in this path will also call fput,
leading to a potential refcount underflow or a use-after-free.
Add a refcount before we signal the kthread to stop. The kthread will try
to grab the cmtp_session_sem mutex before doing the fput, which is held
when get_file is called, so there should be no races there.
Reported-by: Ryota Shiga
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3edc6b0d6c061a70d8ca3c3c72eb1f58ce29bfb1 upstream.
For some chips/drivers, e.g., QCA6174 with ath10k, the decryption is
done by the hardware, and the Protected bit in the Frame Control field
is cleared in the lower level driver before the frame is passed to
mac80211. In such cases, the condition for ieee80211_has_protected() is
not met in ieee80211_rx_h_defragment() of mac80211 and the new security
validation steps are not executed.
Extend mac80211 to cover the case where the Protected bit has been
cleared, but the frame is indicated as having been decrypted by the
hardware. This extends protection against mixed key and fragment cache
attack for additional drivers/chips. This fixes CVE-2020-24586 and
CVE-2020-24587 for such cases.
Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00110-QCARMSWP-1
Cc: stable@vger.kernel.org
Signed-off-by: Wen Gong <wgong@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Link: https://lore.kernel.org/r/20210511200110.037aa5ca0390.I7bb888e2965a0db02a67075fcb5deb50eb7408aa@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a8c4d76a8dd4fb9666fc8919a703d85fb8f44ed8 upstream.
EAPOL frames are used for authentication and key management between the
AP and each individual STA associated in the BSS. Those frames are not
supposed to be sent by one associated STA to another associated STA
(either unicast for broadcast/multicast).
Similarly, in 802.11 they're supposed to be sent to the authenticator
(AP) address.
Since it is possible for unexpected EAPOL frames to result in misbehavior
in supplicant implementations, it is better for the AP to not allow such
cases to be forwarded to other clients either directly, or indirectly if
the AP interface is part of a bridge.
Accept EAPOL (control port) frames only if they're transmitted to the
own address, or, due to interoperability concerns, to the PAE group
address.
Disable forwarding of EAPOL (or well, the configured control port
protocol) frames back to wireless medium in all cases. Previously, these
frames were accepted from fully authenticated and authorized stations
and also from unauthenticated stations for one of the cases.
Additionally, to avoid forwarding by the bridge, rewrite the PAE group
address case to the local MAC address.
Cc: stable@vger.kernel.org
Co-developed-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Link: https://lore.kernel.org/r/20210511200110.cb327ed0cabe.Ib7dcffa2a31f0913d660de65ba3c8aca75b1d10f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7e44a0b597f04e67eee8cdcbe7ee706c6f5de38b upstream.
Similar to the issues fixed in previous patches, TKIP and WEP
should be protected even if for TKIP we have the Michael MIC
protecting it, and WEP is broken anyway.
However, this also somewhat protects potential other algorithms
that drivers might implement.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210511200110.430e8c202313.Ia37e4e5b6b3eaab1a5ae050e015f6c92859dbe27@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bf30ca922a0c0176007e074b0acc77ed345e9990 upstream.
As pointed out by Mathy Vanhoef, we implement the RX PN check
on fragmented frames incorrectly - we check against the last
received PN prior to the new frame, rather than to the one in
this frame itself.
Prior patches addressed the security issue here, but in order
to be able to reason better about the code, fix it to really
compare against the current frame's PN, not the last stored
one.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210511200110.bfbc340ff071.Id0b690e581da7d03d76df90bb0e3fd55930bc8a0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3a11ce08c45b50d69c891d71760b7c5b92074709 upstream.
Prior patches protected against fragmentation cache attacks
by coloring keys, but this shows that it can lead to issues
when multiple stations use the same sequence number. Add a
fragment cache to struct sta_info (in addition to the one in
the interface) to separate fragments for different stations
properly.
This then automatically clear most of the fragment cache when a
station disconnects (or reassociates) from an AP, or when client
interfaces disconnect from the network, etc.
On the way, also fix the comment there since this brings us in line
with the recommendation in 802.11-2016 ("An AP should support ...").
Additionally, remove a useless condition (since there's no problem
purging an already empty list).
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210511200110.fc35046b0d52.I1ef101e3784d13e8f6600d83de7ec9a3a45bcd52@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 270032a2a9c4535799736142e1e7c413ca7b836e upstream.
With old ciphers (WEP and TKIP) we shouldn't be using A-MSDUs
since A-MSDUs are only supported if we know that they are, and
the only practical way for that is HT support which doesn't
support old ciphers.
However, we would normally accept them anyway. Since we check
the MMIC before deaggregating A-MSDUs, and the A-MSDU bit in
the QoS header is not protected in TKIP (or WEP), this enables
attacks similar to CVE-2020-24588. To prevent that, drop A-MSDUs
completely with old ciphers.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210511200110.076543300172.I548e6e71f1ee9cad4b9a37bf212ae7db723587aa@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2b8a1fee3488c602aca8bea004a087e60806a5cf upstream.
Mitigate A-MSDU injection attacks (CVE-2020-24588) by detecting if the
destination address of a subframe equals an RFC1042 (i.e., LLC/SNAP)
header, and if so dropping the complete A-MSDU frame. This mitigates
known attacks, although new (unknown) aggregation-based attacks may
remain possible.
This defense works because in A-MSDU aggregation injection attacks, a
normal encrypted Wi-Fi frame is turned into an A-MSDU frame. This means
the first 6 bytes of the first A-MSDU subframe correspond to an RFC1042
header. In other words, the destination MAC address of the first A-MSDU
subframe contains the start of an RFC1042 header during an aggregation
attack. We can detect this and thereby prevent this specific attack.
For details, see Section 7.2 of "Fragment and Forge: Breaking Wi-Fi
Through Frame Aggregation and Fragmentation".
Note that for kernel 4.9 and above this patch depends on "mac80211:
properly handle A-MSDUs that start with a rfc1042 header". Otherwise
this patch has no impact and attacks will remain possible.
Cc: stable@vger.kernel.org
Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be>
Link: https://lore.kernel.org/r/20210511200110.25d93176ddaf.I9e265b597f2cd23eb44573f35b625947b386a9de@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a1d5ff5651ea592c67054233b14b30bf4452999c upstream.
Properly parse A-MSDUs whose first 6 bytes happen to equal a rfc1042
header. This can occur in practice when the destination MAC address
equals AA:AA:03:00:00:00. More importantly, this simplifies the next
patch to mitigate A-MSDU injection attacks.
Cc: stable@vger.kernel.org
Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be>
Link: https://lore.kernel.org/r/20210511200110.0b2b886492f0.I23dd5d685fe16d3b0ec8106e8f01b59f499dffed@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 94034c40ab4a3fcf581fbc7f8fdf4e29943c4a24 upstream.
Simultaneously prevent mixed key attacks (CVE-2020-24587) and fragment
cache attacks (CVE-2020-24586). This is accomplished by assigning a
unique color to every key (per interface) and using this to track which
key was used to decrypt a fragment. When reassembling frames, it is
now checked whether all fragments were decrypted using the same key.
To assure that fragment cache attacks are also prevented, the ID that is
assigned to keys is unique even over (re)associations and (re)connects.
This means fragments separated by a (re)association or (re)connect will
not be reassembled. Because mac80211 now also prevents the reassembly of
mixed encrypted and plaintext fragments, all cache attacks are prevented.
Cc: stable@vger.kernel.org
Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be>
Link: https://lore.kernel.org/r/20210511200110.3f8290e59823.I622a67769ed39257327a362cfc09c812320eb979@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 965a7d72e798eb7af0aa67210e37cf7ecd1c9cad upstream.
Do not mix plaintext and encrypted fragments in protected Wi-Fi
networks. This fixes CVE-2020-26147.
Previously, an attacker was able to first forward a legitimate encrypted
fragment towards a victim, followed by a plaintext fragment. The
encrypted and plaintext fragment would then be reassembled. For further
details see Section 6.3 and Appendix D in the paper "Fragment and Forge:
Breaking Wi-Fi Through Frame Aggregation and Fragmentation".
Because of this change there are now two equivalent conditions in the
code to determine if a received fragment requires sequential PNs, so we
also move this test to a separate function to make the code easier to
maintain.
Cc: stable@vger.kernel.org
Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be>
Link: https://lore.kernel.org/r/20210511200110.30c4394bb835.I5acfdb552cc1d20c339c262315950b3eac491397@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e70f7a11876a1a788ceadf75e9e5f7af2c868680 upstream.
the following script:
# tc qdisc add dev eth0 handle 0x1 root fq_pie flows 2
# tc qdisc add dev eth0 clsact
# tc filter add dev eth0 egress matchall action skbedit priority 0x10002
# ping 192.0.2.2 -I eth0 -c2 -w1 -q
produces the following splat:
BUG: KASAN: slab-out-of-bounds in fq_pie_qdisc_enqueue+0x1314/0x19d0 [sch_fq_pie]
Read of size 4 at addr ffff888171306924 by task ping/942
CPU: 3 PID: 942 Comm: ping Not tainted 5.12.0+ #441
Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014
Call Trace:
dump_stack+0x92/0xc1
print_address_description.constprop.7+0x1a/0x150
kasan_report.cold.13+0x7f/0x111
fq_pie_qdisc_enqueue+0x1314/0x19d0 [sch_fq_pie]
__dev_queue_xmit+0x1034/0x2b10
ip_finish_output2+0xc62/0x2120
__ip_finish_output+0x553/0xea0
ip_output+0x1ca/0x4d0
ip_send_skb+0x37/0xa0
raw_sendmsg+0x1c4b/0x2d00
sock_sendmsg+0xdb/0x110
__sys_sendto+0x1d7/0x2b0
__x64_sys_sendto+0xdd/0x1b0
do_syscall_64+0x3c/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7fe69735c3eb
Code: 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 f3 0f 1e fa 48 8d 05 75 42 2c 00 41 89 ca 8b 00 85 c0 75 14 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 75 c3 0f 1f 40 00 41 57 4d 89 c7 41 56 41 89
RSP: 002b:00007fff06d7fb38 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 000055e961413700 RCX: 00007fe69735c3eb
RDX: 0000000000000040 RSI: 000055e961413700 RDI: 0000000000000003
RBP: 0000000000000040 R08: 000055e961410500 R09: 0000000000000010
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fff06d81260
R13: 00007fff06d7fb40 R14: 00007fff06d7fc30 R15: 000055e96140f0a0
Allocated by task 917:
kasan_save_stack+0x19/0x40
__kasan_kmalloc+0x7f/0xa0
__kmalloc_node+0x139/0x280
fq_pie_init+0x555/0x8e8 [sch_fq_pie]
qdisc_create+0x407/0x11b0
tc_modify_qdisc+0x3c2/0x17e0
rtnetlink_rcv_msg+0x346/0x8e0
netlink_rcv_skb+0x120/0x380
netlink_unicast+0x439/0x630
netlink_sendmsg+0x719/0xbf0
sock_sendmsg+0xe2/0x110
____sys_sendmsg+0x5ba/0x890
___sys_sendmsg+0xe9/0x160
__sys_sendmsg+0xd3/0x170
do_syscall_64+0x3c/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
The buggy address belongs to the object at ffff888171306800
which belongs to the cache kmalloc-256 of size 256
The buggy address is located 36 bytes to the right of
256-byte region [ffff888171306800, ffff888171306900)
The buggy address belongs to the page:
page:00000000bcfb624e refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x171306
head:00000000bcfb624e order:1 compound_mapcount:0
flags: 0x17ffffc0010200(slab|head|node=0|zone=2|lastcpupid=0x1fffff)
raw: 0017ffffc0010200 dead000000000100 dead000000000122 ffff888100042b40
raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888171306800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff888171306880: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc
>ffff888171306900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffff888171306980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff888171306a00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
fix fq_pie traffic path to avoid selecting 'q->flows + q->flows_cnt' as a
valid flow: it's an address beyond the allocated memory.
Fixes: ec97ecf1eb ("net: sched: add Flow Queue PIE packet scheduler")
CC: stable@vger.kernel.org
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3a62fed2fd7b6fea96d720e779cafc30dfb3a22e upstream.
the patch that fixed an endless loop in_fq_pie_init() was not considering
that 65535 is a valid class id. The correct bugfix for this infinite loop
is to change 'idx' to become an u32, like Colin proposed in the past [1].
Fix this as follows:
- restore 65536 as maximum possible values of 'flows_cnt'
- use u32 'idx' when iterating on 'q->flows'
- fix the TDC selftest
This reverts commit bb2f930d6d.
[1] https://lore.kernel.org/netdev/20210407163808.499027-1-colin.king@canonical.com/
CC: Colin Ian King <colin.king@canonical.com>
CC: stable@vger.kernel.org
Fixes: bb2f930d6d ("net/sched: fix infinite loop in sch_fq_pie")
Fixes: ec97ecf1eb ("net: sched: add Flow Queue PIE packet scheduler")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6d19628f53 upstream.
This fails the pairing procedure when both remote and local non-debug
public keys are identical.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0d7a7b2014 upstream.
My previous commits added a dev_hold() in tunnels ndo_init(),
but forgot to remove it from special functions setting up fallback tunnels.
Fallback tunnels do call their respective ndo_init()
This leads to various reports like :
unregister_netdevice: waiting for ip6gre0 to become free. Usage count = 2
Fixes: 48bb569726 ("ip6_tunnel: sit: proper dev_{hold|put} in ndo_[un]init methods")
Fixes: 6289a98f08 ("sit: proper dev_{hold|put} in ndo_[un]init methods")
Fixes: 40cb881b5a ("ip6_vti: proper dev_{hold|put} in ndo_[un]init methods")
Fixes: 7f700334be ("ip6_gre: proper dev_{hold|put} in ndo_[un]init methods")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6289a98f08 upstream.
After adopting CONFIG_PCPU_DEV_REFCNT=n option, syzbot was able to trigger
a warning [1]
Issue here is that:
- all dev_put() should be paired with a corresponding prior dev_hold().
- A driver doing a dev_put() in its ndo_uninit() MUST also
do a dev_hold() in its ndo_init(), only when ndo_init()
is returning 0.
Otherwise, register_netdevice() would call ndo_uninit()
in its error path and release a refcount too soon.
Fixes: 919067cc84 ("net: add CONFIG_PCPU_DEV_REFCNT")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7f700334be upstream.
After adopting CONFIG_PCPU_DEV_REFCNT=n option, syzbot was able to trigger
a warning [1]
Issue here is that:
- all dev_put() should be paired with a corresponding dev_hold(),
and vice versa.
- A driver doing a dev_put() in its ndo_uninit() MUST also
do a dev_hold() in its ndo_init(), only when ndo_init()
is returning 0.
Otherwise, register_netdevice() would call ndo_uninit()
in its error path and release a refcount too soon.
ip6_gre for example (among others problematic drivers)
has to use dev_hold() in ip6gre_tunnel_init_common()
instead of from ip6gre_newlink_common(), covering
both ip6gre_tunnel_init() and ip6gre_tap_init()/
Note that ip6gre_tunnel_init_common() is not called from
ip6erspan_tap_init() thus we also need to add a dev_hold() there,
as ip6erspan_tunnel_uninit() does call dev_put()
[1]
refcount_t: decrement hit 0; leaking memory.
WARNING: CPU: 0 PID: 8422 at lib/refcount.c:31 refcount_warn_saturate+0xbf/0x1e0 lib/refcount.c:31
Modules linked in:
CPU: 1 PID: 8422 Comm: syz-executor854 Not tainted 5.12.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:refcount_warn_saturate+0xbf/0x1e0 lib/refcount.c:31
Code: 1d 6a 5a e8 09 31 ff 89 de e8 8d 1a ab fd 84 db 75 e0 e8 d4 13 ab fd 48 c7 c7 a0 e1 c1 89 c6 05 4a 5a e8 09 01 e8 2e 36 fb 04 <0f> 0b eb c4 e8 b8 13 ab fd 0f b6 1d 39 5a e8 09 31 ff 89 de e8 58
RSP: 0018:ffffc900018befd0 EFLAGS: 00010282
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: ffff88801ef19c40 RSI: ffffffff815c51f5 RDI: fffff52000317dec
RBP: 0000000000000004 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff815bdf8e R11: 0000000000000000 R12: ffff888018cf4568
R13: ffff888018cf4c00 R14: ffff8880228f2000 R15: ffffffff8d659b80
FS: 00000000014eb300(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055d7bf2b3138 CR3: 0000000014933000 CR4: 00000000001506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
__refcount_dec include/linux/refcount.h:344 [inline]
refcount_dec include/linux/refcount.h:359 [inline]
dev_put include/linux/netdevice.h:4135 [inline]
ip6gre_tunnel_uninit+0x3d7/0x440 net/ipv6/ip6_gre.c:420
register_netdevice+0xadf/0x1500 net/core/dev.c:10308
ip6gre_newlink_common.constprop.0+0x158/0x410 net/ipv6/ip6_gre.c:1984
ip6gre_newlink+0x275/0x7a0 net/ipv6/ip6_gre.c:2017
__rtnl_newlink+0x1062/0x1710 net/core/rtnetlink.c:3443
rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3491
rtnetlink_rcv_msg+0x44e/0xad0 net/core/rtnetlink.c:5553
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2502
netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline]
netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1338
netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1927
sock_sendmsg_nosec net/socket.c:654 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:674
____sys_sendmsg+0x6e8/0x810 net/socket.c:2350
___sys_sendmsg+0xf3/0x170 net/socket.c:2404
__sys_sendmsg+0xe5/0x1b0 net/socket.c:2433
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
Fixes: 919067cc84 ("net: add CONFIG_PCPU_DEV_REFCNT")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2e9f60932a ]
Check at start of fill_frame_info that the MAC header in the supplied
skb is large enough to fit a struct hsr_ethhdr, as otherwise this is
not a valid HSR frame. If it is too small, return an error which will
then cause the callers to clean up the skb. Fixes a KMSAN-found
uninit-value bug reported by syzbot at:
https://syzkaller.appspot.com/bug?id=f7e9b601f1414f814f7602a82b6619a8d80bce3f
Reported-by: syzbot+e267bed19bfc5478fb33@syzkaller.appspotmail.com
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 59259ff7a8 ]
There is a crash in the function br_get_link_af_size_filtered,
as the port_exists(dev) is true and the rx_handler_data of dev is NULL.
But the rx_handler_data of dev is correct saved in vmcore.
The oops looks something like:
...
pc : br_get_link_af_size_filtered+0x28/0x1c8 [bridge]
...
Call trace:
br_get_link_af_size_filtered+0x28/0x1c8 [bridge]
if_nlmsg_size+0x180/0x1b0
rtnl_calcit.isra.12+0xf8/0x148
rtnetlink_rcv_msg+0x334/0x370
netlink_rcv_skb+0x64/0x130
rtnetlink_rcv+0x28/0x38
netlink_unicast+0x1f0/0x250
netlink_sendmsg+0x310/0x378
sock_sendmsg+0x4c/0x70
__sys_sendto+0x120/0x150
__arm64_sys_sendto+0x30/0x40
el0_svc_common+0x78/0x130
el0_svc_handler+0x38/0x78
el0_svc+0x8/0xc
In br_add_if(), we found there is no guarantee that
assigning rx_handler_data to dev->rx_handler_data
will before setting the IFF_BRIDGE_PORT bit of priv_flags.
So there is a possible data competition:
CPU 0: CPU 1:
(RCU read lock) (RTNL lock)
rtnl_calcit() br_add_slave()
if_nlmsg_size() br_add_if()
br_get_link_af_size_filtered() -> netdev_rx_handler_register
...
// The order is not guaranteed
... -> dev->priv_flags |= IFF_BRIDGE_PORT;
// The IFF_BRIDGE_PORT bit of priv_flags has been set
-> if (br_port_exists(dev)) {
// The dev->rx_handler_data has NOT been assigned
-> p = br_port_get_rcu(dev);
....
-> rcu_assign_pointer(dev->rx_handler_data, rx_handler_data);
...
Fix it in br_get_link_af_size_filtered, using br_port_get_check_rcu() and checking the return value.
Signed-off-by: Zhang Zhengming <zhangzhengming@huawei.com>
Reviewed-by: Zhao Lei <zhaolei69@huawei.com>
Reviewed-by: Wang Xiaogang <wangxiaogang3@huawei.com>
Suggested-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 9ddb3c14af upstream.
32-bit architectures which expect 8-byte alignment for 8-byte integers and
need 64-bit DMA addresses (arm, mips, ppc) had their struct page
inadvertently expanded in 2019. When the dma_addr_t was added, it forced
the alignment of the union to 8 bytes, which inserted a 4 byte gap between
'flags' and the union.
Fix this by storing the dma_addr_t in one or two adjacent unsigned longs.
This restores the alignment to that of an unsigned long. We always
store the low bits in the first word to prevent the PageTail bit from
being inadvertently set on a big endian platform. If that happened,
get_user_pages_fast() racing against a page which was freed and
reallocated to the page_pool could dereference a bogus compound_head(),
which would be hard to trace back to this cause.
Link: https://lkml.kernel.org/r/20210510153211.1504886-1-willy@infradead.org
Fixes: c25fff7171 ("mm: add dma_addr_t to struct page")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Matteo Croce <mcroce@linux.microsoft.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 578c18eff1 ]
If userspace exits before calling accept() on a listener that had at least
one new connection ready, we get:
Attempt to release TCP socket in state 8
This happens because the mptcp socket gets cloned when the TCP connection
is ready, but the socket is never exposed to userspace.
The client additionally sends a DATA_FIN, which brings connection into
CLOSE_WAIT state. This in turn prevents the orphan+state reset fixup
in mptcp_sock_destruct() from doing its job.
Fixes: 3721b9b646 ("mptcp: Track received DATA_FIN sequence number and add related helpers")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/185
Tested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Link: https://lore.kernel.org/r/20210507001638.225468-1-mathew.j.martineau@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5e024c3254 ]
Do not assume that the tcph->doff field is correct when parsing for TCP
options, skb_header_pointer() might fail to fetch these bits.
Fixes: 11eeef41d5 ("netfilter: passive OS fingerprint xtables match")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8621436671 ]
syzbot is able to setup kTLS on an SMC socket which coincidentally
uses sk_user_data too. Later, kTLS treats it as psock so triggers a
refcnt warning. The root cause is that smc_setsockopt() simply calls
TCP setsockopt() which includes TCP_ULP. I do not think it makes
sense to setup kTLS on top of SMC sockets, so we should just disallow
this setup.
It is hard to find a commit to blame, but we can apply this patch
since the beginning of TCP_ULP.
Reported-and-tested-by: syzbot+b54a1ce86ba4a623b7f0@syzkaller.appspotmail.com
Fixes: 734942cc4e ("tcp: ULP infrastructure")
Cc: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cf754ae331 ]
When dumping the ethtool information from all the interfaces, the
netlink reply should contain the NLM_F_MULTI flag. This flag allows
userspace tools to identify that multiple messages are expected.
Link: https://bugzilla.redhat.com/1953847
Fixes: 365f9ae4ee ("ethtool: fix genlmsg_put() failure handling in ethnl_default_dumpit()")
Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ac31565c21 ]
When desc->len is equal to chunk_size, it is legal. But when the
xp_aligned_validate_desc() got chunk_end from desc->addr + desc->len
pointing to the next chunk during the check, it caused the check to
fail.
This problem was first introduced in bbff2f321a ("xsk: new descriptor
addressing scheme"). Later in 2b43470add ("xsk: Introduce AF_XDP buffer
allocation API") this piece of code was moved into the new function called
xp_aligned_validate_desc(). This function was then moved into xsk_queue.h
via 26062b185e ("xsk: Explicitly inline functions and move definitions").
Fixes: bbff2f321a ("xsk: new descriptor addressing scheme")
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20210428094424.54435-1-xuanzhuo@linux.alibaba.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c7d13358b6 ]
This extension breaks when trying to delete rules, add a new revision to
fix this.
Fixes: 5e6874cdb8 ("[SECMARK]: Add xtables SECMARK target")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f282df0391 ]
Normally SCTP_MIB_CURRESTAB is always incremented once asoc enter into
ESTABLISHED from the state < ESTABLISHED and decremented when the asoc
is being deleted.
However, in sctp_sf_do_dupcook_b(), the asoc's state can be changed to
ESTABLISHED from the state >= ESTABLISHED where it shouldn't increment
SCTP_MIB_CURRESTAB. Otherwise, one asoc may increment MIB_CURRESTAB
multiple times but only decrement once at the end.
I was able to reproduce it by using scapy to do the 4-way shakehands,
after that I replayed the COOKIE-ECHO chunk with 'peer_vtag' field
changed to different values, and SCTP_MIB_CURRESTAB was incremented
multiple times and never went back to 0 even when the asoc was freed.
This patch is to fix it by only incrementing SCTP_MIB_CURRESTAB when
the state < ESTABLISHED in sctp_sf_do_dupcook_b().
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f8f7e0fb22 ]
Fix a misplaced barrier in call_decode. The struct rpc_rqst is modified
as follows by xprt_complete_rqst:
req->rq_private_buf.len = copied;
/* Ensure all writes are done before we update */
/* req->rq_reply_bytes_recvd */
smp_wmb();
req->rq_reply_bytes_recvd = copied;
And currently read as follows by call_decode:
smp_rmb(); // misplaced
if (!req->rq_reply_bytes_recvd)
goto out;
req->rq_rcv_buf.len = req->rq_private_buf.len;
This patch places the smp_rmb after the if to ensure that
rq_reply_bytes_recvd and rq_private_buf.len are read in order.
Fixes: 9ba828861c ("SUNRPC: Don't try to parse incomplete RPC messages")
Signed-off-by: Baptiste Lepers <baptiste.lepers@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 35b4f24415 ]
There's a panic that occurs in a few of envs, the call trace is as below:
[] general protection fault, ... 0x29acd70f1000a: 0000 [#1] SMP PTI
[] RIP: 0010:sctp_ulpevent_notify_peer_addr_change+0x4b/0x1fa [sctp]
[] sctp_assoc_control_transport+0x1b9/0x210 [sctp]
[] sctp_do_8_2_transport_strike.isra.16+0x15c/0x220 [sctp]
[] sctp_cmd_interpreter.isra.21+0x1231/0x1a10 [sctp]
[] sctp_do_sm+0xc3/0x2a0 [sctp]
[] sctp_generate_timeout_event+0x81/0xf0 [sctp]
This is caused by a transport use-after-free issue. When processing a
duplicate COOKIE-ECHO chunk in sctp_sf_do_dupcook_a(), both COOKIE-ACK
and SHUTDOWN chunks are allocated with the transort from the new asoc.
However, later in the sideeffect machine, the old asoc is used to send
them out and old asoc's shutdown_last_sent_to is set to the transport
that SHUTDOWN chunk attached to in sctp_cmd_setup_t2(), which actually
belongs to the new asoc. After the new_asoc is freed and the old asoc
T2 timeout, the old asoc's shutdown_last_sent_to that is already freed
would be accessed in sctp_sf_t2_timer_expire().
Thanks Alexander and Jere for helping dig into this issue.
To fix it, this patch is to do the asoc update first, then allocate
the COOKIE-ACK and SHUTDOWN chunks with the 'updated' old asoc. This
would make more sense, as a chunk from an asoc shouldn't be sent out
with another asoc. We had fixed quite a few issues caused by this.
Fixes: 145cb2f717 ("sctp: Fix bundling of SHUTDOWN with COOKIE-ACK")
Reported-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Reported-by: syzbot+bbe538efd1046586f587@syzkaller.appspotmail.com
Reported-by: Michal Tesar <mtesar@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1363e6388c ]
The rpcrdma_mr_pop() earlier in the function has already cleared
out mr_list, so it must not be done again in the error path.
Fixes: 847568942f ("xprtrdma: Remove fr_state")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 35d8b10a25 ]
After a reconnect, the reply handler is opening the cwnd (and thus
enabling more RPC Calls to be sent) /before/ rpcrdma_post_recvs()
can post enough Receive WRs to receive their replies. This causes an
RNR and the new connection is lost immediately.
The race is most clearly exposed when KASAN and disconnect injection
are enabled. This slows down rpcrdma_rep_create() enough to allow
the send side to post a bunch of RPC Calls before the Receive
completion handler can invoke ib_post_recv().
Fixes: 2ae50ad68c ("xprtrdma: Close window between waking RPC senders and posting Receives")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 32e6b68167 ]
Commit e340c2d6ef ("xprtrdma: Reduce the doorbell rate (Receive)")
increased the number of Receive WRs that are posted by the client,
but did not increase the size of the Receive Queue allocated during
transport set-up.
This is usually not an issue because RPCRDMA_BACKWARD_WRS is defined
as (32) when SUNRPC_BACKCHANNEL is defined. In cases where it isn't,
there is a real risk of Receive Queue wrapping.
Fixes: e340c2d6ef ("xprtrdma: Reduce the doorbell rate (Receive)")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cb57908653 ]
This code is supposed to pass negative "err" values for tracing but it
passes positive values instead. The problem is that the
trace_svcsock_tcp_send() function takes a long but "err" is an int and
"sent" is a u32. The negative is first type promoted to u32 so it
becomes a high positive then it is promoted to long and it stays
positive.
Fix this by casting "err" directly to long.
Fixes: 998024dee1 ("SUNRPC: Add more svcsock tracepoints")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 09252177d5 ]
Currently if a major timeout value is reached, but the minor value has
not been reached, an ETIMEOUT will not be sent back to the caller.
This can occur if the v4 server is not responding to requests and
retrans is configured larger than the default of two.
For example, A TCP mount with a configured timeout value of 50 and a
retransmission count of 3 to a v4 server which is not responding:
1. Initial value and increment set to 5s, maxval set to 20s, retries at 3
2. Major timeout is set to 20s, minor timeout set to 5s initially
3. xport_adjust_timeout() is called after 5s, retry with 10s timeout,
minor timeout is bumped to 10s
4. And again after another 10s, 15s total time with minor timeout set
to 15s
5. After 20s total time xport_adjust_timeout is called as major timeout is
reached, but skipped because the minor timeout is not reached
- After this time the cpu spins continually calling
xport_adjust_timeout() and returning 0 for 10 seconds.
As seen on perf sched:
39243.913182 [0005] mount.nfs[3794] 4607.938 0.017 9746.863
6. This continues until the 15s minor timeout condition is reached (in
this case for 10 seconds). After which the ETIMEOUT is processed
back to the caller, the cpu spinning stops, and normal operations
continue
Fixes: 7de62bc09f ("SUNRPC dont update timeout value on connection reset")
Signed-off-by: Chris Dion <Christopher.Dion@dell.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6cf23783f7 ]
This tracepoint can crash when dereferencing snd_task because
when some transports connect, they put a cookie in that field
instead of a pointer to an rpc_task.
BUG: KASAN: use-after-free in trace_event_raw_event_xprt_writelock_event+0x141/0x18e [sunrpc]
Read of size 2 at addr ffff8881a83bd3a0 by task git/331872
CPU: 11 PID: 331872 Comm: git Tainted: G S 5.12.0-rc2-00007-g3ab6e585a7f9 #1453
Hardware name: Supermicro SYS-6028R-T/X10DRi, BIOS 1.1a 10/16/2015
Call Trace:
dump_stack+0x9c/0xcf
print_address_description.constprop.0+0x18/0x239
kasan_report+0x174/0x1b0
trace_event_raw_event_xprt_writelock_event+0x141/0x18e [sunrpc]
xprt_prepare_transmit+0x8e/0xc1 [sunrpc]
call_transmit+0x4d/0xc6 [sunrpc]
Fixes: 9ce07ae5eb ("SUNRPC: Replace dprintk() call site in xprt_prepare_transmit")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7638e0bfae ]
I've hit some crashes that occur in the xprt_rdma_inject_disconnect
path. It appears that, for some provides, rdma_disconnect() can
take so long that the transport can disconnect and release its
hardware resources while rdma_disconnect() is still running,
resulting in a UAF in the provider.
The transport's fault injection method may depend on the stability
of transport data structures. That means it needs to be invoked
only from contexts that hold the transport write lock.
Fixes: 4a06825839 ("SUNRPC: Transport fault injection")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ed8157f1eb ]
There is a reproducible sequence from the userland that will trigger a WARN_ON()
condition in taprio_get_start_time, which causes kernel to panic if configured
as "panic_on_warn". Catch this condition in parse_taprio_schedule to
prevent this condition.
Reported as bug on syzkaller:
https://syzkaller.appspot.com/bug?extid=d50710fd0873a9c6b40c
Reported-by: syzbot+d50710fd0873a9c6b40c@syzkaller.appspotmail.com
Signed-off-by: Du Cheng <ducheng2@gmail.com>
Acked-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c1d9e34e11 ]
Fix the following out-of-bounds warning:
net/ethtool/ioctl.c:492:2: warning: 'memcpy' offset [49, 84] from the object at 'link_usettings' is out of the bounds of referenced subobject 'base' with type 'struct ethtool_link_settings' at offset 0 [-Warray-bounds]
The problem is that the original code is trying to copy data into a
some struct members adjacent to each other in a single call to
memcpy(). This causes a legitimate compiler warning because memcpy()
overruns the length of &link_usettings.base. Fix this by directly
using &link_usettings and _from_ as destination and source addresses,
instead.
This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().
Link: https://github.com/KSPP/linux/issues/109
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1e3d976dbb ]
Fix the following out-of-bounds warning:
net/core/flow_dissector.c:835:3: warning: 'memcpy' offset [33, 48] from the object at 'flow_keys' is out of the bounds of referenced subobject 'ipv6_src' with type '__u32[4]' {aka 'unsigned int[4]'} at offset 16 [-Warray-bounds]
The problem is that the original code is trying to copy data into a
couple of struct members adjacent to each other in a single call to
memcpy(). So, the compiler legitimately complains about it. As these
are just a couple of members, fix this by copying each one of them in
separate calls to memcpy().
This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().
Link: https://github.com/KSPP/linux/issues/109
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e5272ad4aa ]
Fix the following out-of-bounds warning:
net/sctp/sm_make_chunk.c:3150:4: warning: 'memcpy' offset [17, 28] from the object at 'addr' is out of the bounds of referenced subobject 'v4' with type 'struct sockaddr_in' at offset 0 [-Warray-bounds]
This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().
Link: https://github.com/KSPP/linux/issues/109
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d6843d1ee2 ]
After channel switch, we should consider any beacon with a
CSA IE as a new switch. If the CSA IE is a leftover from
before the switch that the AP forgot to remove, we'll get
a CSA-to-Self.
This caused issues in iwlwifi where the firmware saw a beacon
with a CSA-to-Self with mode = 1 on the new channel after a
switch. The firmware considered this a new switch and closed
its queues. Since the beacon didn't change between before and
after the switch, we wouldn't handle it (the CRC is the same)
and we wouldn't let the firmware open its queues again or
disconnect if the CSA IE stays for too long.
Clear the CRC valid state after we switch to make sure that
we handle the beacon and handle the CSA IE as required.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://lore.kernel.org/r/20210408143124.b9e68aa98304.I465afb55ca2c7d59f7bf610c6046a1fd732b4c28@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0353b4a96b ]
Recently we had an interop issue where RARP packets got suppressed with
bridge neigh suppression enabled, but the check in the code was meant to
suppress GARP. Exclude RARP packets from it which would allow some VMWare
setups to work, to quote the report:
"Those RARP packets usually get generated by vMware to notify physical
switches when vMotion occurs. vMware may use random sip/tip or just use
sip=tip=0. So the RARP packet sometimes get properly flooded by the vtep
and other times get dropped by the logic"
Reported-by: Amer Abdalamer <amer@nvidia.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6215afcb9a ]
A make W=1 build complains that:
net/sched/cls_flower.c:214:20: warning: cast from restricted __be16
net/sched/cls_flower.c:214:20: warning: incorrect type in argument 1 (different base types)
net/sched/cls_flower.c:214:20: expected unsigned short [usertype] val
net/sched/cls_flower.c:214:20: got restricted __be16 [usertype] dst
This is because we use htons on struct flow_dissector_key_ports members
src and dst, which are defined as __be16, so they are already in network
byte order, not host. The byte swap function for the other direction
should have been used.
Because htons and ntohs do the same thing (either both swap, or none
does), this change has no functional effect except to silence the
warnings.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be85972393 ]
syzbot is hitting "INFO: trying to register non-static key." message [1],
for "struct l2cap_chan"->tx_q.lock spinlock is not yet initialized when
l2cap_chan_del() is called due to e.g. timeout.
Since "struct l2cap_chan"->lock mutex is initialized at l2cap_chan_create()
immediately after "struct l2cap_chan" is allocated using kzalloc(), let's
as well initialize "struct l2cap_chan"->{tx_q,srej_q}.lock spinlocks there.
[1] https://syzkaller.appspot.com/bug?extid=fadfba6a911f6bf71842
Reported-and-tested-by: syzbot <syzbot+fadfba6a911f6bf71842@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3a9d54b194 ]
Currently l2cap_chan_set_defaults() reset chan->conf_state to zero.
However, there is a flag CONF_NOT_COMPLETE which is set when
creating the l2cap_chan. It is suggested that the flag should be
cleared when l2cap_chan is ready, but when l2cap_chan_set_defaults()
is called, l2cap_chan is not yet ready. Therefore, we must set this
flag as the default.
Example crash call trace:
__dump_stack lib/dump_stack.c:15 [inline]
dump_stack+0xc4/0x118 lib/dump_stack.c:56
panic+0x1c6/0x38b kernel/panic.c:117
__warn+0x170/0x1b9 kernel/panic.c:471
warn_slowpath_fmt+0xc7/0xf8 kernel/panic.c:494
debug_print_object+0x175/0x193 lib/debugobjects.c:260
debug_object_assert_init+0x171/0x1bf lib/debugobjects.c:614
debug_timer_assert_init kernel/time/timer.c:629 [inline]
debug_assert_init kernel/time/timer.c:677 [inline]
del_timer+0x7c/0x179 kernel/time/timer.c:1034
try_to_grab_pending+0x81/0x2e5 kernel/workqueue.c:1230
cancel_delayed_work+0x7c/0x1c4 kernel/workqueue.c:2929
l2cap_clear_timer+0x1e/0x41 include/net/bluetooth/l2cap.h:834
l2cap_chan_del+0x2d8/0x37e net/bluetooth/l2cap_core.c:640
l2cap_chan_close+0x532/0x5d8 net/bluetooth/l2cap_core.c:756
l2cap_sock_shutdown+0x806/0x969 net/bluetooth/l2cap_sock.c:1174
l2cap_sock_release+0x64/0x14d net/bluetooth/l2cap_sock.c:1217
__sock_release+0xda/0x217 net/socket.c:580
sock_close+0x1b/0x1f net/socket.c:1039
__fput+0x322/0x55c fs/file_table.c:208
____fput+0x17/0x19 fs/file_table.c:244
task_work_run+0x19b/0x1d3 kernel/task_work.c:115
exit_task_work include/linux/task_work.h:21 [inline]
do_exit+0xe4c/0x204a kernel/exit.c:766
do_group_exit+0x291/0x291 kernel/exit.c:891
get_signal+0x749/0x1093 kernel/signal.c:2396
do_signal+0xa5/0xcdb arch/x86/kernel/signal.c:737
exit_to_usermode_loop arch/x86/entry/common.c:243 [inline]
prepare_exit_to_usermode+0xed/0x235 arch/x86/entry/common.c:277
syscall_return_slowpath+0x3a7/0x3b3 arch/x86/entry/common.c:348
int_ret_from_sys_call+0x25/0xa3
Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reported-by: syzbot+338f014a98367a08a114@syzkaller.appspotmail.com
Reviewed-by: Alain Michaud <alainm@chromium.org>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1980d37565 ]
(struct tipc_link_info)->dest is in network order (__be32), so we must
convert the value to network order before assigning. The problem detected
by sparse:
net/tipc/netlink_compat.c:699:24: warning: incorrect type in assignment (different base types)
net/tipc/netlink_compat.c:699:24: expected restricted __be32 [usertype] dest
net/tipc/netlink_compat.c:699:24: got int
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 34e5b01186 upstream.
As Or Cohen described:
If sctp_destroy_sock is called without sock_net(sk)->sctp.addr_wq_lock
held and sp->do_auto_asconf is true, then an element is removed
from the auto_asconf_splist without any proper locking.
This can happen in the following functions:
1. In sctp_accept, if sctp_sock_migrate fails.
2. In inet_create or inet6_create, if there is a bpf program
attached to BPF_CGROUP_INET_SOCK_CREATE which denies
creation of the sctp socket.
This patch is to fix it by moving the auto_asconf init out of
sctp_init_sock(), by which inet_create()/inet6_create() won't
need to operate it in sctp_destroy_sock() when calling
sk_common_release().
It also makes more sense to do auto_asconf init while binding the
first addr, as auto_asconf actually requires an ANY addr bind,
see it in sctp_addr_wq_timeout_handler().
This addresses CVE-2021-23133.
Fixes: 6102365876 ("bpf: Add new cgroup attach type to enable sock modifications")
Reported-by: Or Cohen <orcohen@paloaltonetworks.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 01bfe5e8e4 upstream.
This reverts commit b166a20b07.
This one has to be reverted as it introduced a dead lock, as
syzbot reported:
CPU0 CPU1
---- ----
lock(&net->sctp.addr_wq_lock);
lock(slock-AF_INET6);
lock(&net->sctp.addr_wq_lock);
lock(slock-AF_INET6);
CPU0 is the thread of sctp_addr_wq_timeout_handler(), and CPU1
is that of sctp_close().
The original issue this commit fixed will be fixed in the next
patch.
Reported-by: syzbot+959223586843e69a2674@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8d432592f3 upstream.
tcp_set_default_congestion_control() is netns-safe in that it writes
to &net->ipv4.tcp_congestion_control, but it also sets
ca->flags |= TCP_CONG_NON_RESTRICTED which is not namespaced.
This has the unintended side-effect of changing the global
net.ipv4.tcp_allowed_congestion_control sysctl, despite the fact that it
is read-only: 97684f0970 ("net: Make tcp_allowed_congestion_control
readonly in non-init netns")
Resolve this netns "leak" by only allowing the init netns to set the
default algorithm to one that is restricted. This restriction could be
removed if tcp_allowed_congestion_control were namespace-ified in the
future.
This bug was uncovered with
https://github.com/JonathonReinhart/linux-netns-sysctl-verify
Fixes: 6670e15244 ("tcp: Namespace-ify sysctl_tcp_default_congestion_control")
Signed-off-by: Jonathon Reinhart <jonathon.reinhart@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7525858679 ]
In digital_tg_recv_dep_req, it calls nfc_tm_data_received(..,resp).
If nfc_tm_data_received() failed, the callee will free the resp via
kfree_skb() and return error. But in the exit branch, the resp
will be freed again.
My patch sets resp to NULL if nfc_tm_data_received() failed, to
avoid the double free.
Fixes: 1c7a4c24fb ("NFC Digital: Add target NFC-DEP support")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9901408815 ]
The IPv6 Multicast Router Advertisements parsing has the following two
issues:
For one thing, ICMPv6 MRD Advertisements are smaller than ICMPv6 MLD
messages (ICMPv6 MRD Adv.: 8 bytes vs. ICMPv6 MLDv1/2: >= 24 bytes,
assuming MLDv2 Reports with at least one multicast address entry).
When ipv6_mc_check_mld_msg() tries to parse an Multicast Router
Advertisement its MLD length check will fail - and it will wrongly
return -EINVAL, even if we have a valid MRD Advertisement. With the
returned -EINVAL the bridge code will assume a broken packet and will
wrongly discard it, potentially leading to multicast packet loss towards
multicast routers.
The second issue is the MRD header parsing in
br_ip6_multicast_mrd_rcv(): It wrongly checks for an ICMPv6 header
immediately after the IPv6 header (IPv6 next header type). However
according to RFC4286, section 2 all MRD messages contain a Router Alert
option (just like MLD). So instead there is an IPv6 Hop-by-Hop option
for the Router Alert between the IPv6 and ICMPv6 header, again leading
to the bridge wrongly discarding Multicast Router Advertisements.
To fix these two issues, introduce a new return value -ENODATA to
ipv6_mc_check_mld() to indicate a valid ICMPv6 packet with a hop-by-hop
option which is not an MLD but potentially an MRD packet. This also
simplifies further parsing in the bridge code, as ipv6_mc_check_mld()
already fully checks the ICMPv6 header and hop-by-hop option.
These issues were found and fixed with the help of the mrdisc tool
(https://github.com/troglobit/mrdisc).
Fixes: 4b3087c7e3 ("bridge: Snoop Multicast Router Advertisements")
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8432b81149 ]
As reported by syzbot [1], there is a memory leak while closing the
socket. We partially solved this issue with commit ac03046ece
("vsock/virtio: free packets during the socket release"), but we
forgot to drain the RX queue when the socket is definitely closed by
the scheduled work.
To avoid future issues, let's use the new virtio_transport_remove_sock()
to drain the RX queue before removing the socket from the af_vsock lists
calling vsock_remove_sock().
[1] https://syzkaller.appspot.com/bug?extid=24452624fc4c571eedd9
Fixes: ac03046ece ("vsock/virtio: free packets during the socket release")
Reported-and-tested-by: syzbot+24452624fc4c571eedd9@syzkaller.appspotmail.com
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7ad18ff644 ]
Commit 38ec4944b5 ("gro: ensure frag0 meets IP header alignment")
did the right thing, but missed the fact that napi_gro_frags() logics
calls for skb_gro_reset_offset() *before* pulling Ethernet header
to the skb linear space.
That said, the introduced check for frag0 address being aligned to 4
always fails for it as Ethernet header is obviously 14 bytes long,
and in case with NET_IP_ALIGN its start is not aligned to 4.
Fix this by adding @nhoff argument to skb_gro_reset_offset() which
tells if an IP header is placed right at the start of frag0 or not.
This restores Fast GRO for napi_gro_frags() that became very slow
after the mentioned commit, and preserves the introduced check to
avoid silent unaligned accesses.
From v1 [0]:
- inline tiny skb_gro_reset_offset() to let the code be optimized
more efficively (esp. for the !NET_IP_ALIGN case) (Eric);
- pull in Reviewed-by from Eric.
[0] https://lore.kernel.org/netdev/20210418114200.5839-1-alobakin@pm.me
Fixes: 38ec4944b5 ("gro: ensure frag0 meets IP header alignment")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e16edc99d6 ]
VMCI feature is not supported in conjunction with the vSphere Fault
Tolerance (FT) feature.
VMware Tools can repeatedly try to create a vsock connection. If FT is
enabled the kernel logs is flooded with the following messages:
qp_alloc_hypercall result = -20
Could not attach to queue pair with -20
"qp_alloc_hypercall result = -20" was hidden by commit e8266c4c33
("VMCI: Stop log spew when qp allocation isn't possible"), but "Could
not attach to queue pair with -20" is still there flooding the log.
Since the error message can be useful in some cases, print it only once.
Fixes: d021c34405 ("VSOCK: Introduce VM Sockets")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 783003f3bb ]
The nftables offload parser sets FLOW_DISSECTOR_KEY_BASIC .n_proto to the
ethertype field in the ethertype frame. However:
- FLOW_DISSECTOR_KEY_BASIC .n_proto field always stores either IPv4 or IPv6
ethertypes.
- FLOW_DISSECTOR_KEY_VLAN .vlan_tpid stores either the 802.1q and 802.1ad
ethertypes. Same as for FLOW_DISSECTOR_KEY_CVLAN.
This function adjusts the flow dissector to handle two scenarios:
1) FLOW_DISSECTOR_KEY_VLAN .vlan_tpid is set to 802.1q or 802.1ad.
Then, transfer:
- the .n_proto field to FLOW_DISSECTOR_KEY_VLAN .tpid.
- the original FLOW_DISSECTOR_KEY_VLAN .tpid to the
FLOW_DISSECTOR_KEY_CVLAN .tpid
- the original FLOW_DISSECTOR_KEY_CVLAN .tpid to the .n_proto field.
2) .n_proto is set to 802.1q or 802.1ad. Then, transfer:
- the .n_proto field to FLOW_DISSECTOR_KEY_VLAN .tpid.
- the original FLOW_DISSECTOR_KEY_VLAN .tpid to the .n_proto field.
Fixes: a82055af59 ("netfilter: nft_payload: add VLAN offload support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ff4d90a89d ]
The flow dissector representation expects the VLAN id in host byteorder.
Add the NFT_OFFLOAD_F_NETWORK2HOST flag to swap the bytes from nft_cmp.
Fixes: a82055af59 ("netfilter: nft_payload: add VLAN offload support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 94f633ea8a ]
af_packet fanout uses RCU rules to ensure f->arr elements
are not dismantled before RCU grace period.
However, it lacks rcu accessors to make sure KCSAN and other tools
wont detect data races. Stupid compilers could also play games.
Fixes: dc99f60069 ("packet: Add fanout support.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: "Gong, Sishuai" <sishuai@purdue.edu>
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9c661b0b85 ]
One use case of PACKET_FANOUT is lockless reception with one socket
per CPU. 256 is a practical limit on increasingly many machines.
Increase PACKET_FANOUT_MAX to 64K. Expand setsockopt PACKET_FANOUT to
take an extra argument max_num_members. Also explicitly define a
fanout_args struct, instead of implicitly casting to an integer. This
documents the API and simplifies the control flow.
If max_num_members is not specified or is set to 0, then 256 is used,
same as before.
Signed-off-by: Tanner Love <tannerlove@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit db878e27a9 ]
If any of the cipher schemes specified by the driver are invalid, bail
out and fail the registration rather than just warning. Otherwise, we
might later crash when we try to use the invalid cipher scheme, e.g.
if the hdr_len is (significantly) less than the pn_offs + pn_len, we'd
have an out-of-bounds access in RX validation.
Fixes: 2475b1cc0d ("mac80211: add generic cipher scheme support")
Link: https://lore.kernel.org/r/20210408143149.38a3a13a1b19.I6b7f5790fa0958ed8049cf02ac2a535c61e9bc96@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ac1db7acea ]
Add the missing destroy_workqueue() before return from
tipc_crypto_start() in the error handling case.
Fixes: 1ef6f7c939 ("tipc: add automatic session key exchange")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 78352f73dc ]
Currently the UDP protocol delivers GSO_FRAGLIST packets to
the sockets without the expected segmentation.
This change addresses the issue introducing and maintaining
a couple of new fields to explicitly accept SKB_GSO_UDP_L4
or GSO_FRAGLIST packets. Additionally updates udp_unexpected_gso()
accordingly.
UDP sockets enabling UDP_GRO stil keep accept_udp_fraglist
zeroed.
v1 -> v2:
- use 2 bits instead of a whole GSO bitmask (Willem)
Fixes: 9fd1ff5d2a ("udp: Support UDP fraglist GRO/GSO.")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aa6dd211e4 ]
In commit 73f156a6e8 ("inetpeer: get rid of ip_id_count")
I used a very small hash table that could be abused
by patient attackers to reveal sensitive information.
Switch to a dynamic sizing, depending on RAM size.
Typical big hosts will now use 128x more storage (2 MB)
to get a similar increase in security and reduction
of hash collisions.
As a bonus, use of alloc_large_system_hash() spreads
allocated memory among all NUMA nodes.
Fixes: 73f156a6e8 ("inetpeer: get rid of ip_id_count")
Reported-by: Amit Klein <aksecurity@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3914d88f76 ]
xsk_generic_xmit() allocates a new skb and then queues it for
xmitting. The size of new skb's headroom is desc->len, so it comes
to the driver/device with no reserved headroom and/or tailroom.
Lots of drivers need some headroom (and sometimes tailroom) to
prepend (and/or append) some headers or data, e.g. CPU tags,
device-specific headers/descriptors (LSO, TLS etc.), and if case
of no available space skb_cow_head() will reallocate the skb.
Reallocations are unwanted on fast-path, especially when it comes
to XDP, so generic XSK xmit should reserve the spaces declared in
dev->needed_headroom and dev->needed tailroom to avoid them.
Note on max(NET_SKB_PAD, L1_CACHE_ALIGN(dev->needed_headroom)):
Usually, output functions reserve LL_RESERVED_SPACE(dev), which
consists of dev->hard_header_len + dev->needed_headroom, aligned
by 16.
However, on XSK xmit hard header is already here in the chunk, so
hard_header_len is not needed. But it'd still be better to align
data up to cacheline, while reserving no less than driver requests
for headroom. NET_SKB_PAD here is to double-insure there will be
no reallocations even when the driver advertises no needed_headroom,
but in fact need it (not so rare case).
Fixes: 35fcde7f8d ("xsk: support for Tx")
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210218204908.5455-5-alobakin@pm.me
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit c61760e694 upstream.
Commits 8a4cd82d ("nfc: fix refcount leak in llcp_sock_connect()")
and c33b1cc62 ("nfc: fix refcount leak in llcp_sock_bind()")
fixed a refcount leak bug in bind/connect but introduced a
use-after-free if the same local is assigned to 2 different sockets.
This can be triggered by the following simple program:
int sock1 = socket( AF_NFC, SOCK_STREAM, NFC_SOCKPROTO_LLCP );
int sock2 = socket( AF_NFC, SOCK_STREAM, NFC_SOCKPROTO_LLCP );
memset( &addr, 0, sizeof(struct sockaddr_nfc_llcp) );
addr.sa_family = AF_NFC;
addr.nfc_protocol = NFC_PROTO_NFC_DEP;
bind( sock1, (struct sockaddr*) &addr, sizeof(struct sockaddr_nfc_llcp) )
bind( sock2, (struct sockaddr*) &addr, sizeof(struct sockaddr_nfc_llcp) )
close(sock1);
close(sock2);
Fix this by assigning NULL to llcp_sock->local after calling
nfc_llcp_local_put.
This addresses CVE-2021-23134.
Reported-by: Or Cohen <orcohen@paloaltonetworks.com>
Reported-by: Nadav Markus <nmarkus@paloaltonetworks.com>
Fixes: c33b1cc62 ("nfc: fix refcount leak in llcp_sock_bind()")
Signed-off-by: Or Cohen <orcohen@paloaltonetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e2cb6b891a upstream.
There is a possible race condition vulnerability between issuing a HCI
command and removing the cont. Specifically, functions hci_req_sync()
and hci_dev_do_close() can race each other like below:
thread-A in hci_req_sync() | thread-B in hci_dev_do_close()
| hci_req_sync_lock(hdev);
test_bit(HCI_UP, &hdev->flags); |
... | test_and_clear_bit(HCI_UP, &hdev->flags)
hci_req_sync_lock(hdev); |
|
In this commit we alter the sequence in function hci_req_sync(). Hence,
the thread-A cannot issue th.
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Cc: Marcel Holtmann <marcel@holtmann.org>
Fixes: 7c6a329e44 ("[Bluetooth] Fix regression from using default link policy")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5c4c8c9544 upstream.
hci_chan can be created in 2 places: hci_loglink_complete_evt() if
it is an AMP hci_chan, or l2cap_conn_add() otherwise. In theory,
Only AMP hci_chan should be removed by a call to
hci_disconn_loglink_complete_evt(). However, the controller might mess
up, call that function, and destroy an hci_chan which is not initiated
by hci_loglink_complete_evt().
This patch adds a verification that the destroyed hci_chan must have
been init'd by hci_loglink_complete_evt().
Example crash call trace:
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xe3/0x144 lib/dump_stack.c:118
print_address_description+0x67/0x22a mm/kasan/report.c:256
kasan_report_error mm/kasan/report.c:354 [inline]
kasan_report mm/kasan/report.c:412 [inline]
kasan_report+0x251/0x28f mm/kasan/report.c:396
hci_send_acl+0x3b/0x56e net/bluetooth/hci_core.c:4072
l2cap_send_cmd+0x5af/0x5c2 net/bluetooth/l2cap_core.c:877
l2cap_send_move_chan_cfm_icid+0x8e/0xb1 net/bluetooth/l2cap_core.c:4661
l2cap_move_fail net/bluetooth/l2cap_core.c:5146 [inline]
l2cap_move_channel_rsp net/bluetooth/l2cap_core.c:5185 [inline]
l2cap_bredr_sig_cmd net/bluetooth/l2cap_core.c:5464 [inline]
l2cap_sig_channel net/bluetooth/l2cap_core.c:5799 [inline]
l2cap_recv_frame+0x1d12/0x51aa net/bluetooth/l2cap_core.c:7023
l2cap_recv_acldata+0x2ea/0x693 net/bluetooth/l2cap_core.c:7596
hci_acldata_packet net/bluetooth/hci_core.c:4606 [inline]
hci_rx_work+0x2bd/0x45e net/bluetooth/hci_core.c:4796
process_one_work+0x6f8/0xb50 kernel/workqueue.c:2175
worker_thread+0x4fc/0x670 kernel/workqueue.c:2321
kthread+0x2f0/0x304 kernel/kthread.c:253
ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415
Allocated by task 38:
set_track mm/kasan/kasan.c:460 [inline]
kasan_kmalloc+0x8d/0x9a mm/kasan/kasan.c:553
kmem_cache_alloc_trace+0x102/0x129 mm/slub.c:2787
kmalloc include/linux/slab.h:515 [inline]
kzalloc include/linux/slab.h:709 [inline]
hci_chan_create+0x86/0x26d net/bluetooth/hci_conn.c:1674
l2cap_conn_add.part.0+0x1c/0x814 net/bluetooth/l2cap_core.c:7062
l2cap_conn_add net/bluetooth/l2cap_core.c:7059 [inline]
l2cap_connect_cfm+0x134/0x852 net/bluetooth/l2cap_core.c:7381
hci_connect_cfm+0x9d/0x122 include/net/bluetooth/hci_core.h:1404
hci_remote_ext_features_evt net/bluetooth/hci_event.c:4161 [inline]
hci_event_packet+0x463f/0x72fa net/bluetooth/hci_event.c:5981
hci_rx_work+0x197/0x45e net/bluetooth/hci_core.c:4791
process_one_work+0x6f8/0xb50 kernel/workqueue.c:2175
worker_thread+0x4fc/0x670 kernel/workqueue.c:2321
kthread+0x2f0/0x304 kernel/kthread.c:253
ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415
Freed by task 1732:
set_track mm/kasan/kasan.c:460 [inline]
__kasan_slab_free mm/kasan/kasan.c:521 [inline]
__kasan_slab_free+0x106/0x128 mm/kasan/kasan.c:493
slab_free_hook mm/slub.c:1409 [inline]
slab_free_freelist_hook+0xaa/0xf6 mm/slub.c:1436
slab_free mm/slub.c:3009 [inline]
kfree+0x182/0x21e mm/slub.c:3972
hci_disconn_loglink_complete_evt net/bluetooth/hci_event.c:4891 [inline]
hci_event_packet+0x6a1c/0x72fa net/bluetooth/hci_event.c:6050
hci_rx_work+0x197/0x45e net/bluetooth/hci_core.c:4791
process_one_work+0x6f8/0xb50 kernel/workqueue.c:2175
worker_thread+0x4fc/0x670 kernel/workqueue.c:2321
kthread+0x2f0/0x304 kernel/kthread.c:253
ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:415
The buggy address belongs to the object at ffff8881d7af9180
which belongs to the cache kmalloc-128 of size 128
The buggy address is located 24 bytes inside of
128-byte region [ffff8881d7af9180, ffff8881d7af9200)
The buggy address belongs to the page:
page:ffffea00075ebe40 count:1 mapcount:0 mapping:ffff8881da403200 index:0x0
flags: 0x8000000000000200(slab)
raw: 8000000000000200 dead000000000100 dead000000000200 ffff8881da403200
raw: 0000000000000000 0000000080150015 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8881d7af9080: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
ffff8881d7af9100: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
>ffff8881d7af9180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8881d7af9200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff8881d7af9280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reported-by: syzbot+98228e7407314d2d4ba2@syzkaller.appspotmail.com
Reviewed-by: Alain Michaud <alainm@chromium.org>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: George Kennedy <george.kennedy@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e7c6e405e1 upstream.
It seems like Fedora 34 ends up enabling a few new gcc warnings, notably
"-Wstringop-overread" and "-Warray-parameter".
Both of them cause what seem to be valid warnings in the kernel, where
we have array size mismatches in function arguments (that are no longer
just silently converted to a pointer to element, but actually checked).
This fixes most of the trivial ones, by making the function declaration
match the function definition, and in the case of intel_pm.c, removing
the over-specified array size from the argument declaration.
At least one 'stringop-overread' warning remains in the i915 driver, but
that one doesn't have the same obvious trivial fix, and may or may not
actually be indicative of a bug.
[ It was a mistake to upgrade one of my machines to Fedora 34 while
being busy with the merge window, but if this is the extent of the
compiler upgrade problems, things are better than usual - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrey Zhizhikin <andrey.z@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 47a017f339 upstream.
It is possible that the MHI ul_callback will be invoked immediately
following the queueing of the skb for transmission, leading to the
callback decrementing the refcount of the associated sk and freeing the
skb.
As such the dereference of skb and the increment of the sk refcount must
happen before the skb is queued, to avoid the skb to be used after free
and potentially the sk to drop its last refcount..
Fixes: 6e728f3213 ("net: qrtr: Add MHI transport layer")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2671fa4dc0 upstream.
These sysctls point to global variables:
- NF_SYSCTL_CT_MAX (&nf_conntrack_max)
- NF_SYSCTL_CT_EXPECT_MAX (&nf_ct_expect_max)
- NF_SYSCTL_CT_BUCKETS (&nf_conntrack_htable_size_user)
Because their data pointers are not updated to point to per-netns
structures, they must be marked read-only in a non-init_net ns.
Otherwise, changes in any net namespace are reflected in (leaked into)
all other net namespaces. This problem has existed since the
introduction of net namespaces.
The current logic marks them read-only only if the net namespace is
owned by an unprivileged user (other than init_user_ns).
Commit d0febd81ae ("netfilter: conntrack: re-visit sysctls in
unprivileged namespaces") "exposes all sysctls even if the namespace is
unpriviliged." Since we need to mark them readonly in any case, we can
forego the unprivileged user check altogether.
Fixes: d0febd81ae ("netfilter: conntrack: re-visit sysctls in unprivileged namespaces")
Signed-off-by: Jonathon Reinhart <Jonathon.Reinhart@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 38ec4944b5 upstream.
After commit 0f6925b3e8 ("virtio_net: Do not pull payload in skb->head")
Guenter Roeck reported one failure in his tests using sh architecture.
After much debugging, we have been able to spot silent unaligned accesses
in inet_gro_receive()
The issue at hand is that upper networking stacks assume their header
is word-aligned. Low level drivers are supposed to reserve NET_IP_ALIGN
bytes before the Ethernet header to make that happen.
This patch hardens skb_gro_reset_offset() to not allow frag0 fast-path
if the fragment is not properly aligned.
Some arches like x86, arm64 and powerpc do not care and define NET_IP_ALIGN
as 0, this extra check will be a NOP for them.
Note that if frag0 is not used, GRO will call pskb_may_pull()
as many times as needed to pull network and transport headers.
Fixes: 0f6925b3e8 ("virtio_net: Do not pull payload in skb->head")
Fixes: 78a478d0ef ("gro: Inline skb_gro_header and cache frag0 virtual address")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 16756d3e77 upstream.
The intention was for pause statistics to not be reported
when driver does not have the relevant callback (only
report an empty netlink nest). What happens currently
we report all 0s instead. Make sure statistics are
initialized to "not set" (which is -1) so the dumping
code skips them.
Fixes: 9a27a33027 ("ethtool: add standard pause stats")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 97684f0970 upstream.
Currently, tcp_allowed_congestion_control is global and writable;
writing to it in any net namespace will leak into all other net
namespaces.
tcp_available_congestion_control and tcp_allowed_congestion_control are
the only sysctls in ipv4_net_table (the per-netns sysctl table) with a
NULL data pointer; their handlers (proc_tcp_available_congestion_control
and proc_allowed_congestion_control) have no other way of referencing a
struct net. Thus, they operate globally.
Because ipv4_net_table does not use designated initializers, there is no
easy way to fix up this one "bad" table entry. However, the data pointer
updating logic shouldn't be applied to NULL pointers anyway, so we
instead force these entries to be read-only.
These sysctls used to exist in ipv4_table (init-net only), but they were
moved to the per-net ipv4_net_table, presumably without realizing that
tcp_allowed_congestion_control was writable and thus introduced a leak.
Because the intent of that commit was only to know (i.e. read) "which
congestion algorithms are available or allowed", this read-only solution
should be sufficient.
The logic added in recent commit
31c4d2f160eb: ("net: Ensure net namespace isolation of sysctls")
does not and cannot check for NULL data pointers, because
other table entries (e.g. /proc/sys/net/netfilter/nf_log/) have
.data=NULL but use other methods (.extra2) to access the struct net.
Fixes: 9cb8e048e5 ("net/ipv4/sysctl: show tcp_{allowed, available}_congestion_control in non-initial netns")
Signed-off-by: Jonathon Reinhart <jonathon.reinhart@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 941ea91e87 upstream.
Similarly to the sit case, we need to remove the tunnels with no
addresses that have been moved to another network namespace.
Fixes: 0bd8762824 ("ip6tnl: add x-netns support")
Signed-off-by: Hristo Venev <hristo@venev.name>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 610f8c0fc8 upstream.
A sit interface created without a local or a remote address is linked
into the `sit_net::tunnels_wc` list of its original namespace. When
deleting a network namespace, delete the devices that have been moved.
The following script triggers a null pointer dereference if devices
linked in a deleted `sit_net` remain:
for i in `seq 1 30`; do
ip netns add ns-test
ip netns exec ns-test ip link add dev veth0 type veth peer veth1
ip netns exec ns-test ip link add dev sit$i type sit dev veth0
ip netns exec ns-test ip link set dev sit$i netns $$
ip netns del ns-test
done
for i in `seq 1 30`; do
ip link del dev sit$i
done
Fixes: 5e6700b3bf ("sit: add support of x-netns")
Signed-off-by: Hristo Venev <hristo@venev.name>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paolo Abeni