redonkable
/
remarkable-linux
1
0
Fork 0
Code Releases Activity
remarkable-linux/include/linux/trace_seq.h

139 lines
3.7 KiB
C
Raw Normal View History

tracing: make trace_seq operations available for core kernel In the process to make TRACE_EVENT macro work for modules, the trace_seq operations must be available for core kernel code. These operations are quite useful and can be used for other implementations. The main idea is that we create a trace_seq handle that acts very much like the seq_file handle. struct trace_seq *s = kmalloc(sizeof(*s, GFP_KERNEL); trace_seq_init(s); trace_seq_printf(s, "some data %d\n", variable); printk("%s", s->buffer); The main use is to allow a top level function call several other functions that may store printf like data into the buffer. Then at the end, the top level function can process all the data with any method it would like to. It could be passed to userspace, output via printk or even use seq_file: trace_seq_to_user(s, ubuf, cnt); seq_puts(m, s->buffer); Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-11 10:59:57 -06:00
#ifndef _LINUX_TRACE_SEQ_H
#define _LINUX_TRACE_SEQ_H
tracing: Create seq_buf layer in trace_seq Create a seq_buf layer that trace_seq sits on. The seq_buf will not be limited to page size. This will allow other usages of seq_buf instead of a hard set PAGE_SIZE one that trace_seq has. Link: http://lkml.kernel.org/r/20141104160221.864997179@goodmis.org Link: http://lkml.kernel.org/r/20141114011412.170377300@goodmis.org Tested-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Jiri Kosina <jkosina@suse.cz> Reviewed-by: Petr Mladek <pmladek@suse.cz> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-06-25 13:54:42 -06:00
#include <linux/seq_buf.h>
tracing/events: add support for modules to TRACE_EVENT Impact: allow modules to add TRACE_EVENTS on load This patch adds the final hooks to allow modules to use the TRACE_EVENT macro. A notifier and a data structure are used to link the TRACE_EVENTs defined in the module to connect them with the ftrace event tracing system. It also adds the necessary automated clean ups to the trace events when a module is removed. Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-10 12:53:50 -06:00
tracing: fix undeclared 'PAGE_SIZE' in include/linux/trace_seq.h when compiling linux-mips with kmemtrace enabled, there will be an error: include/linux/trace_seq.h:12: error: 'PAGE_SIZE' undeclared here (not in a function) I checked the source code and found trace_seq.h used PAGE_SIZE but not included the relative header file, so, fix it via adding the header file <asm/page.h> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Wu Zhangjin <wuzj@lemote.com> LKML-Reference: <1244962350-28702-1-git-send-email-wuzhangjin@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-06-14 00:52:30 -06:00
#include <asm/page.h>
tracing: make trace_seq operations available for core kernel In the process to make TRACE_EVENT macro work for modules, the trace_seq operations must be available for core kernel code. These operations are quite useful and can be used for other implementations. The main idea is that we create a trace_seq handle that acts very much like the seq_file handle. struct trace_seq *s = kmalloc(sizeof(*s, GFP_KERNEL); trace_seq_init(s); trace_seq_printf(s, "some data %d\n", variable); printk("%s", s->buffer); The main use is to allow a top level function call several other functions that may store printf like data into the buffer. Then at the end, the top level function can process all the data with any method it would like to. It could be passed to userspace, output via printk or even use seq_file: trace_seq_to_user(s, ubuf, cnt); seq_puts(m, s->buffer); Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-11 10:59:57 -06:00
/*
* Trace sequences are used to allow a function to call several other functions
tracing: Remove cpu arg from the rb_time_stamp() function The cpu argument is not used inside the rb_time_stamp() function. Plus fix a typo. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20091023233647.118547500@goodmis.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-23 17:36:19 -06:00
* to create a string of data to use (up to a max of PAGE_SIZE).
tracing: make trace_seq operations available for core kernel In the process to make TRACE_EVENT macro work for modules, the trace_seq operations must be available for core kernel code. These operations are quite useful and can be used for other implementations. The main idea is that we create a trace_seq handle that acts very much like the seq_file handle. struct trace_seq *s = kmalloc(sizeof(*s, GFP_KERNEL); trace_seq_init(s); trace_seq_printf(s, "some data %d\n", variable); printk("%s", s->buffer); The main use is to allow a top level function call several other functions that may store printf like data into the buffer. Then at the end, the top level function can process all the data with any method it would like to. It could be passed to userspace, output via printk or even use seq_file: trace_seq_to_user(s, ubuf, cnt); seq_puts(m, s->buffer); Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-11 10:59:57 -06:00
*/
struct trace_seq {
unsigned char buffer[PAGE_SIZE];
tracing: Create seq_buf layer in trace_seq Create a seq_buf layer that trace_seq sits on. The seq_buf will not be limited to page size. This will allow other usages of seq_buf instead of a hard set PAGE_SIZE one that trace_seq has. Link: http://lkml.kernel.org/r/20141104160221.864997179@goodmis.org Link: http://lkml.kernel.org/r/20141114011412.170377300@goodmis.org Tested-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Jiri Kosina <jkosina@suse.cz> Reviewed-by: Petr Mladek <pmladek@suse.cz> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-06-25 13:54:42 -06:00
struct seq_buf seq;
tracing: Add full state to trace_seq The trace_seq buffer might fill up, and right now one needs to check the return value of each printf into the buffer to check for that. Instead, have the buffer keep track of whether it is full or not, and reject more input if it is full or would have overflowed with an input that wasn't added. Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-11-25 08:10:14 -07:00
int full;
tracing: make trace_seq operations available for core kernel In the process to make TRACE_EVENT macro work for modules, the trace_seq operations must be available for core kernel code. These operations are quite useful and can be used for other implementations. The main idea is that we create a trace_seq handle that acts very much like the seq_file handle. struct trace_seq *s = kmalloc(sizeof(*s, GFP_KERNEL); trace_seq_init(s); trace_seq_printf(s, "some data %d\n", variable); printk("%s", s->buffer); The main use is to allow a top level function call several other functions that may store printf like data into the buffer. Then at the end, the top level function can process all the data with any method it would like to. It could be passed to userspace, output via printk or even use seq_file: trace_seq_to_user(s, ubuf, cnt); seq_puts(m, s->buffer); Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-11 10:59:57 -06:00
};
static inline void
trace_seq_init(struct trace_seq *s)
{
tracing: Create seq_buf layer in trace_seq Create a seq_buf layer that trace_seq sits on. The seq_buf will not be limited to page size. This will allow other usages of seq_buf instead of a hard set PAGE_SIZE one that trace_seq has. Link: http://lkml.kernel.org/r/20141104160221.864997179@goodmis.org Link: http://lkml.kernel.org/r/20141114011412.170377300@goodmis.org Tested-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Jiri Kosina <jkosina@suse.cz> Reviewed-by: Petr Mladek <pmladek@suse.cz> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-06-25 13:54:42 -06:00
seq_buf_init(&s->seq, s->buffer, PAGE_SIZE);
tracing: Add full state to trace_seq The trace_seq buffer might fill up, and right now one needs to check the return value of each printf into the buffer to check for that. Instead, have the buffer keep track of whether it is full or not, and reject more input if it is full or would have overflowed with an input that wasn't added. Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-11-25 08:10:14 -07:00
s->full = 0;
tracing: make trace_seq operations available for core kernel In the process to make TRACE_EVENT macro work for modules, the trace_seq operations must be available for core kernel code. These operations are quite useful and can be used for other implementations. The main idea is that we create a trace_seq handle that acts very much like the seq_file handle. struct trace_seq *s = kmalloc(sizeof(*s, GFP_KERNEL); trace_seq_init(s); trace_seq_printf(s, "some data %d\n", variable); printk("%s", s->buffer); The main use is to allow a top level function call several other functions that may store printf like data into the buffer. Then at the end, the top level function can process all the data with any method it would like to. It could be passed to userspace, output via printk or even use seq_file: trace_seq_to_user(s, ubuf, cnt); seq_puts(m, s->buffer); Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-11 10:59:57 -06:00
}
tracing: Use trace_seq_used() and seq_buf_used() instead of len As the seq_buf->len will soon be +1 size when there's an overflow, we must use trace_seq_used() or seq_buf_used() methods to get the real length. This will prevent buffer overflow issues if just the len of the seq_buf descriptor is used to copy memory. Link: http://lkml.kernel.org/r/20141114121911.09ba3d38@gandalf.local.home Reported-by: Petr Mladek <pmladek@suse.cz> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-14 13:49:41 -07:00
/**
* trace_seq_used - amount of actual data written to buffer
* @s: trace sequence descriptor
*
* Returns the amount of data written to the buffer.
*
* IMPORTANT!
*
* Use this instead of @s->seq.len if you need to pass the amount
* of data from the buffer to another buffer (userspace, or what not).
* The @s->seq.len on overflow is bigger than the buffer size and
* using it can cause access to undefined memory.
*/
static inline int trace_seq_used(struct trace_seq *s)
{
return seq_buf_used(&s->seq);
}
tracing: Add trace_seq_buffer_ptr() helper function There's several locations in the kernel that open code the calculation of the next location in the trace_seq buffer. This is usually done with p->buffer + p->len Instead of having this open coded, supply a helper function in the header to do it for them. This function is called trace_seq_buffer_ptr(). Link: http://lkml.kernel.org/p/20140626220129.452783019@goodmis.org Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-06-26 07:42:41 -06:00
/**
* trace_seq_buffer_ptr - return pointer to next location in buffer
* @s: trace sequence descriptor
*
* Returns the pointer to the buffer where the next write to
* the buffer will happen. This is useful to save the location
* that is about to be written to and then return the result
* of that write.
*/
static inline unsigned char *
trace_seq_buffer_ptr(struct trace_seq *s)
{
tracing: Use trace_seq_used() and seq_buf_used() instead of len As the seq_buf->len will soon be +1 size when there's an overflow, we must use trace_seq_used() or seq_buf_used() methods to get the real length. This will prevent buffer overflow issues if just the len of the seq_buf descriptor is used to copy memory. Link: http://lkml.kernel.org/r/20141114121911.09ba3d38@gandalf.local.home Reported-by: Petr Mladek <pmladek@suse.cz> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-14 13:49:41 -07:00
return s->buffer + seq_buf_used(&s->seq);
tracing: Add trace_seq_buffer_ptr() helper function There's several locations in the kernel that open code the calculation of the next location in the trace_seq buffer. This is usually done with p->buffer + p->len Instead of having this open coded, supply a helper function in the header to do it for them. This function is called trace_seq_buffer_ptr(). Link: http://lkml.kernel.org/p/20140626220129.452783019@goodmis.org Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-06-26 07:42:41 -06:00
}
tracing: Add trace_seq_has_overflowed() and trace_handle_return() Adding a trace_seq_has_overflowed() which returns true if the trace_seq had too much written into it allows us to simplify the code. Instead of checking the return value of every call to trace_seq_printf() and friends, they can all be called normally, and at the end we can return !trace_seq_has_overflowed() instead. Several functions also return TRACE_TYPE_PARTIAL_LINE when the trace_seq overflowed and TRACE_TYPE_HANDLED otherwise. Another helper function was created called trace_handle_return() which takes a trace_seq and returns these enums. Using this helper function also simplifies the code. This change also makes it possible to remove the return values of trace_seq_printf() and friends. They should instead just be void functions. Link: http://lkml.kernel.org/r/20141114011410.365183157@goodmis.org Reviewed-by: Petr Mladek <pmladek@suse.cz> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-12 08:29:54 -07:00
/**
* trace_seq_has_overflowed - return true if the trace_seq took too much
* @s: trace sequence descriptor
*
* Returns true if too much data was added to the trace_seq and it is
* now full and will not take anymore.
*/
static inline bool trace_seq_has_overflowed(struct trace_seq *s)
{
tracing: Create seq_buf layer in trace_seq Create a seq_buf layer that trace_seq sits on. The seq_buf will not be limited to page size. This will allow other usages of seq_buf instead of a hard set PAGE_SIZE one that trace_seq has. Link: http://lkml.kernel.org/r/20141104160221.864997179@goodmis.org Link: http://lkml.kernel.org/r/20141114011412.170377300@goodmis.org Tested-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Jiri Kosina <jkosina@suse.cz> Reviewed-by: Petr Mladek <pmladek@suse.cz> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-06-25 13:54:42 -06:00
return s->full || seq_buf_has_overflowed(&s->seq);
tracing: Add trace_seq_has_overflowed() and trace_handle_return() Adding a trace_seq_has_overflowed() which returns true if the trace_seq had too much written into it allows us to simplify the code. Instead of checking the return value of every call to trace_seq_printf() and friends, they can all be called normally, and at the end we can return !trace_seq_has_overflowed() instead. Several functions also return TRACE_TYPE_PARTIAL_LINE when the trace_seq overflowed and TRACE_TYPE_HANDLED otherwise. Another helper function was created called trace_handle_return() which takes a trace_seq and returns these enums. Using this helper function also simplifies the code. This change also makes it possible to remove the return values of trace_seq_printf() and friends. They should instead just be void functions. Link: http://lkml.kernel.org/r/20141114011410.365183157@goodmis.org Reviewed-by: Petr Mladek <pmladek@suse.cz> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-12 08:29:54 -07:00
}
tracing: make trace_seq operations available for core kernel In the process to make TRACE_EVENT macro work for modules, the trace_seq operations must be available for core kernel code. These operations are quite useful and can be used for other implementations. The main idea is that we create a trace_seq handle that acts very much like the seq_file handle. struct trace_seq *s = kmalloc(sizeof(*s, GFP_KERNEL); trace_seq_init(s); trace_seq_printf(s, "some data %d\n", variable); printk("%s", s->buffer); The main use is to allow a top level function call several other functions that may store printf like data into the buffer. Then at the end, the top level function can process all the data with any method it would like to. It could be passed to userspace, output via printk or even use seq_file: trace_seq_to_user(s, ubuf, cnt); seq_puts(m, s->buffer); Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-11 10:59:57 -06:00
/*
* Currently only defined when tracing is enabled.
*/
#ifdef CONFIG_TRACING
treewide: use __printf not __attribute__((format(printf,...))) Standardize the style for compiler based printf format verification. Standardized the location of __printf too. Done via script and a little typing. $ grep -rPl --include=*.[ch] -w "__attribute__" * | \ grep -vP "^(tools|scripts|include/linux/compiler-gcc.h)" | \ xargs perl -n -i -e 'local $/; while (<>) { s/\b__attribute__\s*\(\s*\(\s*format\s*\(\s*printf\s*,\s*(.+)\s*,\s*(.+)\s*\)\s*\)\s*\)/__printf($1, $2)/g ; print; }' [akpm@linux-foundation.org: revert arch bits] Signed-off-by: Joe Perches <joe@perches.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31 18:11:33 -06:00
extern __printf(2, 3)
tracing: Remove return values of most trace_seq_*() functions The trace_seq_printf() and friends are used to store strings into a buffer that can be passed around from function to function. If the trace_seq buffer fills up, it will not print any more. The return values were somewhat inconsistant and using trace_seq_has_overflowed() was a better way to know if the write to the trace_seq buffer succeeded or not. Now that all users have removed reading the return value of the printf() type functions, they can safely return void and keep future users of them from reading the inconsistent values as well. Link: http://lkml.kernel.org/r/20141114011411.992510720@goodmis.org Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-12 16:07:22 -07:00
void trace_seq_printf(struct trace_seq *s, const char *fmt, ...);
treewide: use __printf not __attribute__((format(printf,...))) Standardize the style for compiler based printf format verification. Standardized the location of __printf too. Done via script and a little typing. $ grep -rPl --include=*.[ch] -w "__attribute__" * | \ grep -vP "^(tools|scripts|include/linux/compiler-gcc.h)" | \ xargs perl -n -i -e 'local $/; while (<>) { s/\b__attribute__\s*\(\s*\(\s*format\s*\(\s*printf\s*,\s*(.+)\s*,\s*(.+)\s*\)\s*\)\s*\)/__printf($1, $2)/g ; print; }' [akpm@linux-foundation.org: revert arch bits] Signed-off-by: Joe Perches <joe@perches.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31 18:11:33 -06:00
extern __printf(2, 0)
tracing: Remove return values of most trace_seq_*() functions The trace_seq_printf() and friends are used to store strings into a buffer that can be passed around from function to function. If the trace_seq buffer fills up, it will not print any more. The return values were somewhat inconsistant and using trace_seq_has_overflowed() was a better way to know if the write to the trace_seq buffer succeeded or not. Now that all users have removed reading the return value of the printf() type functions, they can safely return void and keep future users of them from reading the inconsistent values as well. Link: http://lkml.kernel.org/r/20141114011411.992510720@goodmis.org Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-12 16:07:22 -07:00
void trace_seq_vprintf(struct trace_seq *s, const char *fmt, va_list args);
extern void
tracing: make trace_seq operations available for core kernel In the process to make TRACE_EVENT macro work for modules, the trace_seq operations must be available for core kernel code. These operations are quite useful and can be used for other implementations. The main idea is that we create a trace_seq handle that acts very much like the seq_file handle. struct trace_seq *s = kmalloc(sizeof(*s, GFP_KERNEL); trace_seq_init(s); trace_seq_printf(s, "some data %d\n", variable); printk("%s", s->buffer); The main use is to allow a top level function call several other functions that may store printf like data into the buffer. Then at the end, the top level function can process all the data with any method it would like to. It could be passed to userspace, output via printk or even use seq_file: trace_seq_to_user(s, ubuf, cnt); seq_puts(m, s->buffer); Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-11 10:59:57 -06:00
trace_seq_bprintf(struct trace_seq *s, const char *fmt, const u32 *binary);
tracing: Buffer the output of seq_file in case of filled buffer If the seq_read fills the buffer it will call s_start again on the next itertation with the same position. This causes a problem with the function_graph tracer because it consumes the iteration in order to determine leaf functions. What happens is that the iterator stores the entry, and the function graph plugin will look at the next entry. If that next entry is a return of the same function and task, then the function is a leaf and the function_graph plugin calls ring_buffer_read which moves the ring buffer iterator forward (the trace iterator still points to the function start entry). The copying of the trace_seq to the seq_file buffer will fail if the seq_file buffer is full. The seq_read will not show this entry. The next read by userspace will cause seq_read to again call s_start which will reuse the trace iterator entry (the function start entry). But the function return entry was already consumed. The function graph plugin will think that this entry is a nested function and not a leaf. To solve this, the trace code now checks the return status of the seq_printf (trace_print_seq). If the writing to the seq_file buffer fails, we set a flag in the iterator (leftover) and we do not reset the trace_seq buffer. On the next call to s_start, we check the leftover flag, and if it is set, we just reuse the trace_seq buffer and do not call into the plugin print functions. Before this patch: 2) | fput() { 2) | __fput() { 2) 0.550 us | inotify_inode_queue_event(); 2) | __fsnotify_parent() { 2) 0.540 us | inotify_dentry_parent_queue_event(); After the patch: 2) | fput() { 2) | __fput() { 2) 0.550 us | inotify_inode_queue_event(); 2) 0.548 us | __fsnotify_parent(); 2) 0.540 us | inotify_dentry_parent_queue_event(); [ Updated the patch to fix a missing return 0 from the trace_print_seq() stub when CONFIG_TRACING is disabled. Reported-by: Ingo Molnar <mingo@elte.hu> ] Reported-by: Jiri Olsa <jolsa@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-12-07 07:11:39 -07:00
extern int trace_print_seq(struct seq_file *m, struct trace_seq *s);
tracing: Clean up trace_seq.c For using trace_seq_*() functions in NMI context, I posted a patch to move it to the lib/ directory. This caused Andrew Morton to take a look at the code. He went through and gave a lot of comments about missing kernel doc, inconsistent types for the save variable, mix match of EXPORT_SYMBOL_GPL() and EXPORT_SYMBOL() as well as missing EXPORT_SYMBOL*()s. There were a few comments about the way variables were being compared (int vs uint). All these were good review comments and should be implemented regardless of if trace_seq.c should be moved to lib/ or not. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-06-20 15:38:01 -06:00
extern int trace_seq_to_user(struct trace_seq *s, char __user *ubuf,
int cnt);
tracing: Remove return values of most trace_seq_*() functions The trace_seq_printf() and friends are used to store strings into a buffer that can be passed around from function to function. If the trace_seq buffer fills up, it will not print any more. The return values were somewhat inconsistant and using trace_seq_has_overflowed() was a better way to know if the write to the trace_seq buffer succeeded or not. Now that all users have removed reading the return value of the printf() type functions, they can safely return void and keep future users of them from reading the inconsistent values as well. Link: http://lkml.kernel.org/r/20141114011411.992510720@goodmis.org Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-12 16:07:22 -07:00
extern void trace_seq_puts(struct trace_seq *s, const char *str);
extern void trace_seq_putc(struct trace_seq *s, unsigned char c);
extern void trace_seq_putmem(struct trace_seq *s, const void *mem, unsigned int len);
extern void trace_seq_putmem_hex(struct trace_seq *s, const void *mem,
tracing: Clean up trace_seq.c For using trace_seq_*() functions in NMI context, I posted a patch to move it to the lib/ directory. This caused Andrew Morton to take a look at the code. He went through and gave a lot of comments about missing kernel doc, inconsistent types for the save variable, mix match of EXPORT_SYMBOL_GPL() and EXPORT_SYMBOL() as well as missing EXPORT_SYMBOL*()s. There were a few comments about the way variables were being compared (int vs uint). All these were good review comments and should be implemented regardless of if trace_seq.c should be moved to lib/ or not. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-06-20 15:38:01 -06:00
unsigned int len);
constify path argument of trace_seq_path() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-03-14 19:51:10 -06:00
extern int trace_seq_path(struct trace_seq *s, const struct path *path);
tracing: make trace_seq operations available for core kernel In the process to make TRACE_EVENT macro work for modules, the trace_seq operations must be available for core kernel code. These operations are quite useful and can be used for other implementations. The main idea is that we create a trace_seq handle that acts very much like the seq_file handle. struct trace_seq *s = kmalloc(sizeof(*s, GFP_KERNEL); trace_seq_init(s); trace_seq_printf(s, "some data %d\n", variable); printk("%s", s->buffer); The main use is to allow a top level function call several other functions that may store printf like data into the buffer. Then at the end, the top level function can process all the data with any method it would like to. It could be passed to userspace, output via printk or even use seq_file: trace_seq_to_user(s, ubuf, cnt); seq_puts(m, s->buffer); Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-11 10:59:57 -06:00
tracing: Remove return values of most trace_seq_*() functions The trace_seq_printf() and friends are used to store strings into a buffer that can be passed around from function to function. If the trace_seq buffer fills up, it will not print any more. The return values were somewhat inconsistant and using trace_seq_has_overflowed() was a better way to know if the write to the trace_seq buffer succeeded or not. Now that all users have removed reading the return value of the printf() type functions, they can safely return void and keep future users of them from reading the inconsistent values as well. Link: http://lkml.kernel.org/r/20141114011411.992510720@goodmis.org Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-12 16:07:22 -07:00
extern void trace_seq_bitmask(struct trace_seq *s, const unsigned long *maskp,
tracing: Add __bitmask() macro to trace events to cpumasks and other bitmasks Being able to show a cpumask of events can be useful as some events may affect only some CPUs. There is no standard way to record the cpumask and converting it to a string is rather expensive during the trace as traces happen in hotpaths. It would be better to record the raw event mask and be able to parse it at print time. The following macros were added for use with the TRACE_EVENT() macro: __bitmask() __assign_bitmask() __get_bitmask() To test this, I added this to the sched_migrate_task event, which looked like this: TRACE_EVENT(sched_migrate_task, TP_PROTO(struct task_struct *p, int dest_cpu, const struct cpumask *cpus), TP_ARGS(p, dest_cpu, cpus), TP_STRUCT__entry( __array( char, comm, TASK_COMM_LEN ) __field( pid_t, pid ) __field( int, prio ) __field( int, orig_cpu ) __field( int, dest_cpu ) __bitmask( cpumask, num_possible_cpus() ) ), TP_fast_assign( memcpy(__entry->comm, p->comm, TASK_COMM_LEN); __entry->pid = p->pid; __entry->prio = p->prio; __entry->orig_cpu = task_cpu(p); __entry->dest_cpu = dest_cpu; __assign_bitmask(cpumask, cpumask_bits(cpus), num_possible_cpus()); ), TP_printk("comm=%s pid=%d prio=%d orig_cpu=%d dest_cpu=%d cpumask=%s", __entry->comm, __entry->pid, __entry->prio, __entry->orig_cpu, __entry->dest_cpu, __get_bitmask(cpumask)) ); With the output of: ksmtuned-3613 [003] d..2 485.220508: sched_migrate_task: comm=ksmtuned pid=3615 prio=120 orig_cpu=3 dest_cpu=2 cpumask=00000000,0000000f migration/1-13 [001] d..5 485.221202: sched_migrate_task: comm=ksmtuned pid=3614 prio=120 orig_cpu=1 dest_cpu=0 cpumask=00000000,0000000f awk-3615 [002] d.H5 485.221747: sched_migrate_task: comm=rcu_preempt pid=7 prio=120 orig_cpu=0 dest_cpu=1 cpumask=00000000,000000ff migration/2-18 [002] d..5 485.222062: sched_migrate_task: comm=ksmtuned pid=3615 prio=120 orig_cpu=2 dest_cpu=3 cpumask=00000000,0000000f Link: http://lkml.kernel.org/r/1399377998-14870-6-git-send-email-javi.merino@arm.com Link: http://lkml.kernel.org/r/20140506132238.22e136d1@gandalf.local.home Suggested-by: Javi Merino <javi.merino@arm.com> Tested-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-05-06 11:10:24 -06:00
int nmaskbits);
tracing: make trace_seq operations available for core kernel In the process to make TRACE_EVENT macro work for modules, the trace_seq operations must be available for core kernel code. These operations are quite useful and can be used for other implementations. The main idea is that we create a trace_seq handle that acts very much like the seq_file handle. struct trace_seq *s = kmalloc(sizeof(*s, GFP_KERNEL); trace_seq_init(s); trace_seq_printf(s, "some data %d\n", variable); printk("%s", s->buffer); The main use is to allow a top level function call several other functions that may store printf like data into the buffer. Then at the end, the top level function can process all the data with any method it would like to. It could be passed to userspace, output via printk or even use seq_file: trace_seq_to_user(s, ubuf, cnt); seq_puts(m, s->buffer); Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-11 10:59:57 -06:00
#else /* CONFIG_TRACING */
tracing: Remove return values of most trace_seq_*() functions The trace_seq_printf() and friends are used to store strings into a buffer that can be passed around from function to function. If the trace_seq buffer fills up, it will not print any more. The return values were somewhat inconsistant and using trace_seq_has_overflowed() was a better way to know if the write to the trace_seq buffer succeeded or not. Now that all users have removed reading the return value of the printf() type functions, they can safely return void and keep future users of them from reading the inconsistent values as well. Link: http://lkml.kernel.org/r/20141114011411.992510720@goodmis.org Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-12 16:07:22 -07:00
static inline void trace_seq_printf(struct trace_seq *s, const char *fmt, ...)
tracing: make trace_seq operations available for core kernel In the process to make TRACE_EVENT macro work for modules, the trace_seq operations must be available for core kernel code. These operations are quite useful and can be used for other implementations. The main idea is that we create a trace_seq handle that acts very much like the seq_file handle. struct trace_seq *s = kmalloc(sizeof(*s, GFP_KERNEL); trace_seq_init(s); trace_seq_printf(s, "some data %d\n", variable); printk("%s", s->buffer); The main use is to allow a top level function call several other functions that may store printf like data into the buffer. Then at the end, the top level function can process all the data with any method it would like to. It could be passed to userspace, output via printk or even use seq_file: trace_seq_to_user(s, ubuf, cnt); seq_puts(m, s->buffer); Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-11 10:59:57 -06:00
{
}
tracing: Remove return values of most trace_seq_*() functions The trace_seq_printf() and friends are used to store strings into a buffer that can be passed around from function to function. If the trace_seq buffer fills up, it will not print any more. The return values were somewhat inconsistant and using trace_seq_has_overflowed() was a better way to know if the write to the trace_seq buffer succeeded or not. Now that all users have removed reading the return value of the printf() type functions, they can safely return void and keep future users of them from reading the inconsistent values as well. Link: http://lkml.kernel.org/r/20141114011411.992510720@goodmis.org Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-12 16:07:22 -07:00
static inline void
tracing: make trace_seq operations available for core kernel In the process to make TRACE_EVENT macro work for modules, the trace_seq operations must be available for core kernel code. These operations are quite useful and can be used for other implementations. The main idea is that we create a trace_seq handle that acts very much like the seq_file handle. struct trace_seq *s = kmalloc(sizeof(*s, GFP_KERNEL); trace_seq_init(s); trace_seq_printf(s, "some data %d\n", variable); printk("%s", s->buffer); The main use is to allow a top level function call several other functions that may store printf like data into the buffer. Then at the end, the top level function can process all the data with any method it would like to. It could be passed to userspace, output via printk or even use seq_file: trace_seq_to_user(s, ubuf, cnt); seq_puts(m, s->buffer); Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-11 10:59:57 -06:00
trace_seq_bprintf(struct trace_seq *s, const char *fmt, const u32 *binary)
{
}
tracing: Remove return values of most trace_seq_*() functions The trace_seq_printf() and friends are used to store strings into a buffer that can be passed around from function to function. If the trace_seq buffer fills up, it will not print any more. The return values were somewhat inconsistant and using trace_seq_has_overflowed() was a better way to know if the write to the trace_seq buffer succeeded or not. Now that all users have removed reading the return value of the printf() type functions, they can safely return void and keep future users of them from reading the inconsistent values as well. Link: http://lkml.kernel.org/r/20141114011411.992510720@goodmis.org Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-12 16:07:22 -07:00
static inline void
tracing: Add __bitmask() macro to trace events to cpumasks and other bitmasks Being able to show a cpumask of events can be useful as some events may affect only some CPUs. There is no standard way to record the cpumask and converting it to a string is rather expensive during the trace as traces happen in hotpaths. It would be better to record the raw event mask and be able to parse it at print time. The following macros were added for use with the TRACE_EVENT() macro: __bitmask() __assign_bitmask() __get_bitmask() To test this, I added this to the sched_migrate_task event, which looked like this: TRACE_EVENT(sched_migrate_task, TP_PROTO(struct task_struct *p, int dest_cpu, const struct cpumask *cpus), TP_ARGS(p, dest_cpu, cpus), TP_STRUCT__entry( __array( char, comm, TASK_COMM_LEN ) __field( pid_t, pid ) __field( int, prio ) __field( int, orig_cpu ) __field( int, dest_cpu ) __bitmask( cpumask, num_possible_cpus() ) ), TP_fast_assign( memcpy(__entry->comm, p->comm, TASK_COMM_LEN); __entry->pid = p->pid; __entry->prio = p->prio; __entry->orig_cpu = task_cpu(p); __entry->dest_cpu = dest_cpu; __assign_bitmask(cpumask, cpumask_bits(cpus), num_possible_cpus()); ), TP_printk("comm=%s pid=%d prio=%d orig_cpu=%d dest_cpu=%d cpumask=%s", __entry->comm, __entry->pid, __entry->prio, __entry->orig_cpu, __entry->dest_cpu, __get_bitmask(cpumask)) ); With the output of: ksmtuned-3613 [003] d..2 485.220508: sched_migrate_task: comm=ksmtuned pid=3615 prio=120 orig_cpu=3 dest_cpu=2 cpumask=00000000,0000000f migration/1-13 [001] d..5 485.221202: sched_migrate_task: comm=ksmtuned pid=3614 prio=120 orig_cpu=1 dest_cpu=0 cpumask=00000000,0000000f awk-3615 [002] d.H5 485.221747: sched_migrate_task: comm=rcu_preempt pid=7 prio=120 orig_cpu=0 dest_cpu=1 cpumask=00000000,000000ff migration/2-18 [002] d..5 485.222062: sched_migrate_task: comm=ksmtuned pid=3615 prio=120 orig_cpu=2 dest_cpu=3 cpumask=00000000,0000000f Link: http://lkml.kernel.org/r/1399377998-14870-6-git-send-email-javi.merino@arm.com Link: http://lkml.kernel.org/r/20140506132238.22e136d1@gandalf.local.home Suggested-by: Javi Merino <javi.merino@arm.com> Tested-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-05-06 11:10:24 -06:00
trace_seq_bitmask(struct trace_seq *s, const unsigned long *maskp,
int nmaskbits)
{
}
tracing: Buffer the output of seq_file in case of filled buffer If the seq_read fills the buffer it will call s_start again on the next itertation with the same position. This causes a problem with the function_graph tracer because it consumes the iteration in order to determine leaf functions. What happens is that the iterator stores the entry, and the function graph plugin will look at the next entry. If that next entry is a return of the same function and task, then the function is a leaf and the function_graph plugin calls ring_buffer_read which moves the ring buffer iterator forward (the trace iterator still points to the function start entry). The copying of the trace_seq to the seq_file buffer will fail if the seq_file buffer is full. The seq_read will not show this entry. The next read by userspace will cause seq_read to again call s_start which will reuse the trace iterator entry (the function start entry). But the function return entry was already consumed. The function graph plugin will think that this entry is a nested function and not a leaf. To solve this, the trace code now checks the return status of the seq_printf (trace_print_seq). If the writing to the seq_file buffer fails, we set a flag in the iterator (leftover) and we do not reset the trace_seq buffer. On the next call to s_start, we check the leftover flag, and if it is set, we just reuse the trace_seq buffer and do not call into the plugin print functions. Before this patch: 2) | fput() { 2) | __fput() { 2) 0.550 us | inotify_inode_queue_event(); 2) | __fsnotify_parent() { 2) 0.540 us | inotify_dentry_parent_queue_event(); After the patch: 2) | fput() { 2) | __fput() { 2) 0.550 us | inotify_inode_queue_event(); 2) 0.548 us | __fsnotify_parent(); 2) 0.540 us | inotify_dentry_parent_queue_event(); [ Updated the patch to fix a missing return 0 from the trace_print_seq() stub when CONFIG_TRACING is disabled. Reported-by: Ingo Molnar <mingo@elte.hu> ] Reported-by: Jiri Olsa <jolsa@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-12-07 07:11:39 -07:00
static inline int trace_print_seq(struct seq_file *m, struct trace_seq *s)
tracing: make trace_seq operations available for core kernel In the process to make TRACE_EVENT macro work for modules, the trace_seq operations must be available for core kernel code. These operations are quite useful and can be used for other implementations. The main idea is that we create a trace_seq handle that acts very much like the seq_file handle. struct trace_seq *s = kmalloc(sizeof(*s, GFP_KERNEL); trace_seq_init(s); trace_seq_printf(s, "some data %d\n", variable); printk("%s", s->buffer); The main use is to allow a top level function call several other functions that may store printf like data into the buffer. Then at the end, the top level function can process all the data with any method it would like to. It could be passed to userspace, output via printk or even use seq_file: trace_seq_to_user(s, ubuf, cnt); seq_puts(m, s->buffer); Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-11 10:59:57 -06:00
{
tracing: Buffer the output of seq_file in case of filled buffer If the seq_read fills the buffer it will call s_start again on the next itertation with the same position. This causes a problem with the function_graph tracer because it consumes the iteration in order to determine leaf functions. What happens is that the iterator stores the entry, and the function graph plugin will look at the next entry. If that next entry is a return of the same function and task, then the function is a leaf and the function_graph plugin calls ring_buffer_read which moves the ring buffer iterator forward (the trace iterator still points to the function start entry). The copying of the trace_seq to the seq_file buffer will fail if the seq_file buffer is full. The seq_read will not show this entry. The next read by userspace will cause seq_read to again call s_start which will reuse the trace iterator entry (the function start entry). But the function return entry was already consumed. The function graph plugin will think that this entry is a nested function and not a leaf. To solve this, the trace code now checks the return status of the seq_printf (trace_print_seq). If the writing to the seq_file buffer fails, we set a flag in the iterator (leftover) and we do not reset the trace_seq buffer. On the next call to s_start, we check the leftover flag, and if it is set, we just reuse the trace_seq buffer and do not call into the plugin print functions. Before this patch: 2) | fput() { 2) | __fput() { 2) 0.550 us | inotify_inode_queue_event(); 2) | __fsnotify_parent() { 2) 0.540 us | inotify_dentry_parent_queue_event(); After the patch: 2) | fput() { 2) | __fput() { 2) 0.550 us | inotify_inode_queue_event(); 2) 0.548 us | __fsnotify_parent(); 2) 0.540 us | inotify_dentry_parent_queue_event(); [ Updated the patch to fix a missing return 0 from the trace_print_seq() stub when CONFIG_TRACING is disabled. Reported-by: Ingo Molnar <mingo@elte.hu> ] Reported-by: Jiri Olsa <jolsa@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-12-07 07:11:39 -07:00
return 0;
tracing: make trace_seq operations available for core kernel In the process to make TRACE_EVENT macro work for modules, the trace_seq operations must be available for core kernel code. These operations are quite useful and can be used for other implementations. The main idea is that we create a trace_seq handle that acts very much like the seq_file handle. struct trace_seq *s = kmalloc(sizeof(*s, GFP_KERNEL); trace_seq_init(s); trace_seq_printf(s, "some data %d\n", variable); printk("%s", s->buffer); The main use is to allow a top level function call several other functions that may store printf like data into the buffer. Then at the end, the top level function can process all the data with any method it would like to. It could be passed to userspace, output via printk or even use seq_file: trace_seq_to_user(s, ubuf, cnt); seq_puts(m, s->buffer); Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-11 10:59:57 -06:00
}
tracing: Clean up trace_seq.c For using trace_seq_*() functions in NMI context, I posted a patch to move it to the lib/ directory. This caused Andrew Morton to take a look at the code. He went through and gave a lot of comments about missing kernel doc, inconsistent types for the save variable, mix match of EXPORT_SYMBOL_GPL() and EXPORT_SYMBOL() as well as missing EXPORT_SYMBOL*()s. There were a few comments about the way variables were being compared (int vs uint). All these were good review comments and should be implemented regardless of if trace_seq.c should be moved to lib/ or not. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-06-20 15:38:01 -06:00
static inline int trace_seq_to_user(struct trace_seq *s, char __user *ubuf,
int cnt)
tracing: make trace_seq operations available for core kernel In the process to make TRACE_EVENT macro work for modules, the trace_seq operations must be available for core kernel code. These operations are quite useful and can be used for other implementations. The main idea is that we create a trace_seq handle that acts very much like the seq_file handle. struct trace_seq *s = kmalloc(sizeof(*s, GFP_KERNEL); trace_seq_init(s); trace_seq_printf(s, "some data %d\n", variable); printk("%s", s->buffer); The main use is to allow a top level function call several other functions that may store printf like data into the buffer. Then at the end, the top level function can process all the data with any method it would like to. It could be passed to userspace, output via printk or even use seq_file: trace_seq_to_user(s, ubuf, cnt); seq_puts(m, s->buffer); Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-11 10:59:57 -06:00
{
return 0;
}
tracing: Remove return values of most trace_seq_*() functions The trace_seq_printf() and friends are used to store strings into a buffer that can be passed around from function to function. If the trace_seq buffer fills up, it will not print any more. The return values were somewhat inconsistant and using trace_seq_has_overflowed() was a better way to know if the write to the trace_seq buffer succeeded or not. Now that all users have removed reading the return value of the printf() type functions, they can safely return void and keep future users of them from reading the inconsistent values as well. Link: http://lkml.kernel.org/r/20141114011411.992510720@goodmis.org Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-12 16:07:22 -07:00
static inline void trace_seq_puts(struct trace_seq *s, const char *str)
tracing: make trace_seq operations available for core kernel In the process to make TRACE_EVENT macro work for modules, the trace_seq operations must be available for core kernel code. These operations are quite useful and can be used for other implementations. The main idea is that we create a trace_seq handle that acts very much like the seq_file handle. struct trace_seq *s = kmalloc(sizeof(*s, GFP_KERNEL); trace_seq_init(s); trace_seq_printf(s, "some data %d\n", variable); printk("%s", s->buffer); The main use is to allow a top level function call several other functions that may store printf like data into the buffer. Then at the end, the top level function can process all the data with any method it would like to. It could be passed to userspace, output via printk or even use seq_file: trace_seq_to_user(s, ubuf, cnt); seq_puts(m, s->buffer); Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-11 10:59:57 -06:00
{
}
tracing: Remove return values of most trace_seq_*() functions The trace_seq_printf() and friends are used to store strings into a buffer that can be passed around from function to function. If the trace_seq buffer fills up, it will not print any more. The return values were somewhat inconsistant and using trace_seq_has_overflowed() was a better way to know if the write to the trace_seq buffer succeeded or not. Now that all users have removed reading the return value of the printf() type functions, they can safely return void and keep future users of them from reading the inconsistent values as well. Link: http://lkml.kernel.org/r/20141114011411.992510720@goodmis.org Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-12 16:07:22 -07:00
static inline void trace_seq_putc(struct trace_seq *s, unsigned char c)
tracing: make trace_seq operations available for core kernel In the process to make TRACE_EVENT macro work for modules, the trace_seq operations must be available for core kernel code. These operations are quite useful and can be used for other implementations. The main idea is that we create a trace_seq handle that acts very much like the seq_file handle. struct trace_seq *s = kmalloc(sizeof(*s, GFP_KERNEL); trace_seq_init(s); trace_seq_printf(s, "some data %d\n", variable); printk("%s", s->buffer); The main use is to allow a top level function call several other functions that may store printf like data into the buffer. Then at the end, the top level function can process all the data with any method it would like to. It could be passed to userspace, output via printk or even use seq_file: trace_seq_to_user(s, ubuf, cnt); seq_puts(m, s->buffer); Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-11 10:59:57 -06:00
{
}
tracing: Remove return values of most trace_seq_*() functions The trace_seq_printf() and friends are used to store strings into a buffer that can be passed around from function to function. If the trace_seq buffer fills up, it will not print any more. The return values were somewhat inconsistant and using trace_seq_has_overflowed() was a better way to know if the write to the trace_seq buffer succeeded or not. Now that all users have removed reading the return value of the printf() type functions, they can safely return void and keep future users of them from reading the inconsistent values as well. Link: http://lkml.kernel.org/r/20141114011411.992510720@goodmis.org Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-12 16:07:22 -07:00
static inline void
tracing: Clean up trace_seq.c For using trace_seq_*() functions in NMI context, I posted a patch to move it to the lib/ directory. This caused Andrew Morton to take a look at the code. He went through and gave a lot of comments about missing kernel doc, inconsistent types for the save variable, mix match of EXPORT_SYMBOL_GPL() and EXPORT_SYMBOL() as well as missing EXPORT_SYMBOL*()s. There were a few comments about the way variables were being compared (int vs uint). All these were good review comments and should be implemented regardless of if trace_seq.c should be moved to lib/ or not. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-06-20 15:38:01 -06:00
trace_seq_putmem(struct trace_seq *s, const void *mem, unsigned int len)
tracing: make trace_seq operations available for core kernel In the process to make TRACE_EVENT macro work for modules, the trace_seq operations must be available for core kernel code. These operations are quite useful and can be used for other implementations. The main idea is that we create a trace_seq handle that acts very much like the seq_file handle. struct trace_seq *s = kmalloc(sizeof(*s, GFP_KERNEL); trace_seq_init(s); trace_seq_printf(s, "some data %d\n", variable); printk("%s", s->buffer); The main use is to allow a top level function call several other functions that may store printf like data into the buffer. Then at the end, the top level function can process all the data with any method it would like to. It could be passed to userspace, output via printk or even use seq_file: trace_seq_to_user(s, ubuf, cnt); seq_puts(m, s->buffer); Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-11 10:59:57 -06:00
{
}
tracing: Remove return values of most trace_seq_*() functions The trace_seq_printf() and friends are used to store strings into a buffer that can be passed around from function to function. If the trace_seq buffer fills up, it will not print any more. The return values were somewhat inconsistant and using trace_seq_has_overflowed() was a better way to know if the write to the trace_seq buffer succeeded or not. Now that all users have removed reading the return value of the printf() type functions, they can safely return void and keep future users of them from reading the inconsistent values as well. Link: http://lkml.kernel.org/r/20141114011411.992510720@goodmis.org Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-11-12 16:07:22 -07:00
static inline void trace_seq_putmem_hex(struct trace_seq *s, const void *mem,
tracing: Clean up trace_seq.c For using trace_seq_*() functions in NMI context, I posted a patch to move it to the lib/ directory. This caused Andrew Morton to take a look at the code. He went through and gave a lot of comments about missing kernel doc, inconsistent types for the save variable, mix match of EXPORT_SYMBOL_GPL() and EXPORT_SYMBOL() as well as missing EXPORT_SYMBOL*()s. There were a few comments about the way variables were being compared (int vs uint). All these were good review comments and should be implemented regardless of if trace_seq.c should be moved to lib/ or not. Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-06-20 15:38:01 -06:00
unsigned int len)
tracing: make trace_seq operations available for core kernel In the process to make TRACE_EVENT macro work for modules, the trace_seq operations must be available for core kernel code. These operations are quite useful and can be used for other implementations. The main idea is that we create a trace_seq handle that acts very much like the seq_file handle. struct trace_seq *s = kmalloc(sizeof(*s, GFP_KERNEL); trace_seq_init(s); trace_seq_printf(s, "some data %d\n", variable); printk("%s", s->buffer); The main use is to allow a top level function call several other functions that may store printf like data into the buffer. Then at the end, the top level function can process all the data with any method it would like to. It could be passed to userspace, output via printk or even use seq_file: trace_seq_to_user(s, ubuf, cnt); seq_puts(m, s->buffer); Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-11 10:59:57 -06:00
{
}
constify path argument of trace_seq_path() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-03-14 19:51:10 -06:00
static inline int trace_seq_path(struct trace_seq *s, const struct path *path)
tracing: make trace_seq operations available for core kernel In the process to make TRACE_EVENT macro work for modules, the trace_seq operations must be available for core kernel code. These operations are quite useful and can be used for other implementations. The main idea is that we create a trace_seq handle that acts very much like the seq_file handle. struct trace_seq *s = kmalloc(sizeof(*s, GFP_KERNEL); trace_seq_init(s); trace_seq_printf(s, "some data %d\n", variable); printk("%s", s->buffer); The main use is to allow a top level function call several other functions that may store printf like data into the buffer. Then at the end, the top level function can process all the data with any method it would like to. It could be passed to userspace, output via printk or even use seq_file: trace_seq_to_user(s, ubuf, cnt); seq_puts(m, s->buffer); Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-04-11 10:59:57 -06:00
{
return 0;
}
#endif /* CONFIG_TRACING */
#endif /* _LINUX_TRACE_SEQ_H */