remarkable-linux/drivers/pci/host/pcie-iproc.c

563 lines
14 KiB
C
Raw Normal View History

/*
* Copyright (C) 2014 Hauke Mehrtens <hauke@hauke-m.de>
* Copyright (C) 2015 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation version 2.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
* kind, whether express or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/msi.h>
#include <linux/clk.h>
#include <linux/module.h>
#include <linux/mbus.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/of_address.h>
#include <linux/of_pci.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/phy/phy.h>
#include "pcie-iproc.h"
#define EP_PERST_SOURCE_SELECT_SHIFT 2
#define EP_PERST_SOURCE_SELECT BIT(EP_PERST_SOURCE_SELECT_SHIFT)
#define EP_MODE_SURVIVE_PERST_SHIFT 1
#define EP_MODE_SURVIVE_PERST BIT(EP_MODE_SURVIVE_PERST_SHIFT)
#define RC_PCIE_RST_OUTPUT_SHIFT 0
#define RC_PCIE_RST_OUTPUT BIT(RC_PCIE_RST_OUTPUT_SHIFT)
#define PAXC_RESET_MASK 0x7f
#define CFG_IND_ADDR_MASK 0x00001ffc
#define CFG_ADDR_BUS_NUM_SHIFT 20
#define CFG_ADDR_BUS_NUM_MASK 0x0ff00000
#define CFG_ADDR_DEV_NUM_SHIFT 15
#define CFG_ADDR_DEV_NUM_MASK 0x000f8000
#define CFG_ADDR_FUNC_NUM_SHIFT 12
#define CFG_ADDR_FUNC_NUM_MASK 0x00007000
#define CFG_ADDR_REG_NUM_SHIFT 2
#define CFG_ADDR_REG_NUM_MASK 0x00000ffc
#define CFG_ADDR_CFG_TYPE_SHIFT 0
#define CFG_ADDR_CFG_TYPE_MASK 0x00000003
#define SYS_RC_INTX_MASK 0xf
#define PCIE_PHYLINKUP_SHIFT 3
#define PCIE_PHYLINKUP BIT(PCIE_PHYLINKUP_SHIFT)
#define PCIE_DL_ACTIVE_SHIFT 2
#define PCIE_DL_ACTIVE BIT(PCIE_DL_ACTIVE_SHIFT)
#define OARR_VALID_SHIFT 0
#define OARR_VALID BIT(OARR_VALID_SHIFT)
#define OARR_SIZE_CFG_SHIFT 1
#define OARR_SIZE_CFG BIT(OARR_SIZE_CFG_SHIFT)
#define MAX_NUM_OB_WINDOWS 2
#define IPROC_PCIE_REG_INVALID 0xffff
enum iproc_pcie_reg {
IPROC_PCIE_CLK_CTRL = 0,
IPROC_PCIE_CFG_IND_ADDR,
IPROC_PCIE_CFG_IND_DATA,
IPROC_PCIE_CFG_ADDR,
IPROC_PCIE_CFG_DATA,
IPROC_PCIE_INTX_EN,
IPROC_PCIE_OARR_LO,
IPROC_PCIE_OARR_HI,
IPROC_PCIE_OMAP_LO,
IPROC_PCIE_OMAP_HI,
IPROC_PCIE_LINK_STATUS,
};
/* iProc PCIe PAXB registers */
static const u16 iproc_pcie_reg_paxb[] = {
[IPROC_PCIE_CLK_CTRL] = 0x000,
[IPROC_PCIE_CFG_IND_ADDR] = 0x120,
[IPROC_PCIE_CFG_IND_DATA] = 0x124,
[IPROC_PCIE_CFG_ADDR] = 0x1f8,
[IPROC_PCIE_CFG_DATA] = 0x1fc,
[IPROC_PCIE_INTX_EN] = 0x330,
[IPROC_PCIE_OARR_LO] = 0xd20,
[IPROC_PCIE_OARR_HI] = 0xd24,
[IPROC_PCIE_OMAP_LO] = 0xd40,
[IPROC_PCIE_OMAP_HI] = 0xd44,
[IPROC_PCIE_LINK_STATUS] = 0xf0c,
};
/* iProc PCIe PAXC v1 registers */
static const u16 iproc_pcie_reg_paxc[] = {
[IPROC_PCIE_CLK_CTRL] = 0x000,
[IPROC_PCIE_CFG_IND_ADDR] = 0x1f0,
[IPROC_PCIE_CFG_IND_DATA] = 0x1f4,
[IPROC_PCIE_CFG_ADDR] = 0x1f8,
[IPROC_PCIE_CFG_DATA] = 0x1fc,
[IPROC_PCIE_INTX_EN] = IPROC_PCIE_REG_INVALID,
[IPROC_PCIE_OARR_LO] = IPROC_PCIE_REG_INVALID,
[IPROC_PCIE_OARR_HI] = IPROC_PCIE_REG_INVALID,
[IPROC_PCIE_OMAP_LO] = IPROC_PCIE_REG_INVALID,
[IPROC_PCIE_OMAP_HI] = IPROC_PCIE_REG_INVALID,
[IPROC_PCIE_LINK_STATUS] = IPROC_PCIE_REG_INVALID,
};
static inline struct iproc_pcie *iproc_data(struct pci_bus *bus)
{
struct iproc_pcie *pcie;
#ifdef CONFIG_ARM
struct pci_sys_data *sys = bus->sysdata;
pcie = sys->private_data;
#else
pcie = bus->sysdata;
#endif
return pcie;
}
static inline bool iproc_pcie_reg_is_invalid(u16 reg_offset)
{
return !!(reg_offset == IPROC_PCIE_REG_INVALID);
}
static inline u16 iproc_pcie_reg_offset(struct iproc_pcie *pcie,
enum iproc_pcie_reg reg)
{
return pcie->reg_offsets[reg];
}
static inline u32 iproc_pcie_read_reg(struct iproc_pcie *pcie,
enum iproc_pcie_reg reg)
{
u16 offset = iproc_pcie_reg_offset(pcie, reg);
if (iproc_pcie_reg_is_invalid(offset))
return 0;
return readl(pcie->base + offset);
}
static inline void iproc_pcie_write_reg(struct iproc_pcie *pcie,
enum iproc_pcie_reg reg, u32 val)
{
u16 offset = iproc_pcie_reg_offset(pcie, reg);
if (iproc_pcie_reg_is_invalid(offset))
return;
writel(val, pcie->base + offset);
}
static inline void iproc_pcie_ob_write(struct iproc_pcie *pcie,
enum iproc_pcie_reg reg,
unsigned window, u32 val)
{
u16 offset = iproc_pcie_reg_offset(pcie, reg);
if (iproc_pcie_reg_is_invalid(offset))
return;
writel(val, pcie->base + offset + (window * 8));
}
/**
* Note access to the configuration registers are protected at the higher layer
* by 'pci_lock' in drivers/pci/access.c
*/
static void __iomem *iproc_pcie_map_cfg_bus(struct pci_bus *bus,
unsigned int devfn,
int where)
{
struct iproc_pcie *pcie = iproc_data(bus);
unsigned slot = PCI_SLOT(devfn);
unsigned fn = PCI_FUNC(devfn);
unsigned busno = bus->number;
u32 val;
u16 offset;
/* root complex access */
if (busno == 0) {
if (slot > 0 || fn > 0)
return NULL;
iproc_pcie_write_reg(pcie, IPROC_PCIE_CFG_IND_ADDR,
where & CFG_IND_ADDR_MASK);
offset = iproc_pcie_reg_offset(pcie, IPROC_PCIE_CFG_IND_DATA);
if (iproc_pcie_reg_is_invalid(offset))
return NULL;
else
return (pcie->base + offset);
}
/*
* PAXC is connected to an internally emulated EP within the SoC. It
* allows only one device.
*/
if (pcie->type == IPROC_PCIE_PAXC)
if (slot > 0)
return NULL;
/* EP device access */
val = (busno << CFG_ADDR_BUS_NUM_SHIFT) |
(slot << CFG_ADDR_DEV_NUM_SHIFT) |
(fn << CFG_ADDR_FUNC_NUM_SHIFT) |
(where & CFG_ADDR_REG_NUM_MASK) |
(1 & CFG_ADDR_CFG_TYPE_MASK);
iproc_pcie_write_reg(pcie, IPROC_PCIE_CFG_ADDR, val);
offset = iproc_pcie_reg_offset(pcie, IPROC_PCIE_CFG_DATA);
if (iproc_pcie_reg_is_invalid(offset))
return NULL;
else
return (pcie->base + offset);
}
static struct pci_ops iproc_pcie_ops = {
.map_bus = iproc_pcie_map_cfg_bus,
.read = pci_generic_config_read32,
.write = pci_generic_config_write32,
};
static void iproc_pcie_reset(struct iproc_pcie *pcie)
{
u32 val;
if (pcie->type == IPROC_PCIE_PAXC) {
val = iproc_pcie_read_reg(pcie, IPROC_PCIE_CLK_CTRL);
val &= ~PAXC_RESET_MASK;
iproc_pcie_write_reg(pcie, IPROC_PCIE_CLK_CTRL, val);
udelay(100);
val |= PAXC_RESET_MASK;
iproc_pcie_write_reg(pcie, IPROC_PCIE_CLK_CTRL, val);
udelay(100);
return;
}
/*
* Select perst_b signal as reset source. Put the device into reset,
* and then bring it out of reset
*/
val = iproc_pcie_read_reg(pcie, IPROC_PCIE_CLK_CTRL);
val &= ~EP_PERST_SOURCE_SELECT & ~EP_MODE_SURVIVE_PERST &
~RC_PCIE_RST_OUTPUT;
iproc_pcie_write_reg(pcie, IPROC_PCIE_CLK_CTRL, val);
udelay(250);
val |= RC_PCIE_RST_OUTPUT;
iproc_pcie_write_reg(pcie, IPROC_PCIE_CLK_CTRL, val);
msleep(100);
}
static int iproc_pcie_check_link(struct iproc_pcie *pcie, struct pci_bus *bus)
{
u8 hdr_type;
u32 link_ctrl, class, val;
u16 pos, link_status;
bool link_is_active = false;
/*
* PAXC connects to emulated endpoint devices directly and does not
* have a Serdes. Therefore skip the link detection logic here.
*/
if (pcie->type == IPROC_PCIE_PAXC)
return 0;
val = iproc_pcie_read_reg(pcie, IPROC_PCIE_LINK_STATUS);
if (!(val & PCIE_PHYLINKUP) || !(val & PCIE_DL_ACTIVE)) {
dev_err(pcie->dev, "PHY or data link is INACTIVE!\n");
return -ENODEV;
}
/* make sure we are not in EP mode */
pci_bus_read_config_byte(bus, 0, PCI_HEADER_TYPE, &hdr_type);
if ((hdr_type & 0x7f) != PCI_HEADER_TYPE_BRIDGE) {
dev_err(pcie->dev, "in EP mode, hdr=%#02x\n", hdr_type);
return -EFAULT;
}
/* force class to PCI_CLASS_BRIDGE_PCI (0x0604) */
#define PCI_BRIDGE_CTRL_REG_OFFSET 0x43c
#define PCI_CLASS_BRIDGE_MASK 0xffff00
#define PCI_CLASS_BRIDGE_SHIFT 8
pci_bus_read_config_dword(bus, 0, PCI_BRIDGE_CTRL_REG_OFFSET, &class);
class &= ~PCI_CLASS_BRIDGE_MASK;
class |= (PCI_CLASS_BRIDGE_PCI << PCI_CLASS_BRIDGE_SHIFT);
pci_bus_write_config_dword(bus, 0, PCI_BRIDGE_CTRL_REG_OFFSET, class);
/* check link status to see if link is active */
pos = pci_bus_find_capability(bus, 0, PCI_CAP_ID_EXP);
pci_bus_read_config_word(bus, 0, pos + PCI_EXP_LNKSTA, &link_status);
if (link_status & PCI_EXP_LNKSTA_NLW)
link_is_active = true;
if (!link_is_active) {
/* try GEN 1 link speed */
#define PCI_LINK_STATUS_CTRL_2_OFFSET 0x0dc
#define PCI_TARGET_LINK_SPEED_MASK 0xf
#define PCI_TARGET_LINK_SPEED_GEN2 0x2
#define PCI_TARGET_LINK_SPEED_GEN1 0x1
pci_bus_read_config_dword(bus, 0,
PCI_LINK_STATUS_CTRL_2_OFFSET,
&link_ctrl);
if ((link_ctrl & PCI_TARGET_LINK_SPEED_MASK) ==
PCI_TARGET_LINK_SPEED_GEN2) {
link_ctrl &= ~PCI_TARGET_LINK_SPEED_MASK;
link_ctrl |= PCI_TARGET_LINK_SPEED_GEN1;
pci_bus_write_config_dword(bus, 0,
PCI_LINK_STATUS_CTRL_2_OFFSET,
link_ctrl);
msleep(100);
pos = pci_bus_find_capability(bus, 0, PCI_CAP_ID_EXP);
pci_bus_read_config_word(bus, 0, pos + PCI_EXP_LNKSTA,
&link_status);
if (link_status & PCI_EXP_LNKSTA_NLW)
link_is_active = true;
}
}
dev_info(pcie->dev, "link: %s\n", link_is_active ? "UP" : "DOWN");
return link_is_active ? 0 : -ENODEV;
}
static void iproc_pcie_enable(struct iproc_pcie *pcie)
{
iproc_pcie_write_reg(pcie, IPROC_PCIE_INTX_EN, SYS_RC_INTX_MASK);
}
/**
* Some iProc SoCs require the SW to configure the outbound address mapping
*
* Outbound address translation:
*
* iproc_pcie_address = axi_address - axi_offset
* OARR = iproc_pcie_address
* OMAP = pci_addr
*
* axi_addr -> iproc_pcie_address -> OARR -> OMAP -> pci_address
*/
static int iproc_pcie_setup_ob(struct iproc_pcie *pcie, u64 axi_addr,
u64 pci_addr, resource_size_t size)
{
struct iproc_pcie_ob *ob = &pcie->ob;
unsigned i;
u64 max_size = (u64)ob->window_size * MAX_NUM_OB_WINDOWS;
u64 remainder;
if (size > max_size) {
dev_err(pcie->dev,
"res size %pap exceeds max supported size 0x%llx\n",
&size, max_size);
return -EINVAL;
}
div64_u64_rem(size, ob->window_size, &remainder);
if (remainder) {
dev_err(pcie->dev,
"res size %pap needs to be multiple of window size %pap\n",
&size, &ob->window_size);
return -EINVAL;
}
if (axi_addr < ob->axi_offset) {
dev_err(pcie->dev,
"axi address %pap less than offset %pap\n",
&axi_addr, &ob->axi_offset);
return -EINVAL;
}
/*
* Translate the AXI address to the internal address used by the iProc
* PCIe core before programming the OARR
*/
axi_addr -= ob->axi_offset;
for (i = 0; i < MAX_NUM_OB_WINDOWS; i++) {
iproc_pcie_ob_write(pcie, IPROC_PCIE_OARR_LO, i,
lower_32_bits(axi_addr) | OARR_VALID |
(ob->set_oarr_size ? 1 : 0));
iproc_pcie_ob_write(pcie, IPROC_PCIE_OARR_HI, i,
upper_32_bits(axi_addr));
iproc_pcie_ob_write(pcie, IPROC_PCIE_OMAP_LO, i,
lower_32_bits(pci_addr));
iproc_pcie_ob_write(pcie, IPROC_PCIE_OMAP_HI, i,
upper_32_bits(pci_addr));
size -= ob->window_size;
if (size == 0)
break;
axi_addr += ob->window_size;
pci_addr += ob->window_size;
}
return 0;
}
static int iproc_pcie_map_ranges(struct iproc_pcie *pcie,
struct list_head *resources)
{
struct resource_entry *window;
int ret;
resource_list_for_each_entry(window, resources) {
struct resource *res = window->res;
u64 res_type = resource_type(res);
switch (res_type) {
case IORESOURCE_IO:
case IORESOURCE_BUS:
break;
case IORESOURCE_MEM:
ret = iproc_pcie_setup_ob(pcie, res->start,
res->start - window->offset,
resource_size(res));
if (ret)
return ret;
break;
default:
dev_err(pcie->dev, "invalid resource %pR\n", res);
return -EINVAL;
}
}
return 0;
}
PCI: iproc: Add iProc PCIe MSI support Add PCIe MSI support for both PAXB and PAXC interfaces on all iProc-based platforms. The iProc PCIe MSI support deploys an event queue-based implementation. Each event queue is serviced by a GIC interrupt and can support up to 64 MSI vectors. Host memory is allocated for the event queues, and each event queue consists of 64 word-sized entries. MSI data is written to the lower 16-bit of each entry, whereas the upper 16-bit of the entry is reserved for the controller for internal processing. Each event queue is tracked by a head pointer and tail pointer. Head pointer indicates the next entry in the event queue to be processed by the driver and is updated by the driver after processing is done. The controller uses the tail pointer as the next MSI data insertion point. The controller ensures MSI data is flushed to host memory before updating the tail pointer and then triggering the interrupt. MSI IRQ affinity is supported by evenly distributing the interrupts to each CPU core. MSI vector is moved from one GIC interrupt to another in order to steer to the target CPU. Therefore, the actual number of supported MSI vectors is: M * 64 / N where M denotes the number of GIC interrupts (event queues), and N denotes the number of CPU cores. This iProc event queue-based MSI support should not be used with newer platforms with integrated MSI support in the GIC (e.g., giv2m or gicv3-its). [bhelgaas: fold in Kconfig fixes from Arnd Bergmann <arnd@arndb.de>] Signed-off-by: Ray Jui <rjui@broadcom.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Anup Patel <anup.patel@broadcom.com> Reviewed-by: Vikram Prakash <vikramp@broadcom.com> Reviewed-by: Scott Branden <sbranden@broadcom.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
2016-01-06 17:04:35 -07:00
static int iproc_pcie_msi_enable(struct iproc_pcie *pcie)
{
struct device_node *msi_node;
msi_node = of_parse_phandle(pcie->dev->of_node, "msi-parent", 0);
if (!msi_node)
return -ENODEV;
/*
* If another MSI controller is being used, the call below should fail
* but that is okay
*/
return iproc_msi_init(pcie, msi_node);
}
static void iproc_pcie_msi_disable(struct iproc_pcie *pcie)
{
iproc_msi_exit(pcie);
}
int iproc_pcie_setup(struct iproc_pcie *pcie, struct list_head *res)
{
int ret;
void *sysdata;
struct pci_bus *bus;
if (!pcie || !pcie->dev || !pcie->base)
return -EINVAL;
ret = phy_init(pcie->phy);
if (ret) {
dev_err(pcie->dev, "unable to initialize PCIe PHY\n");
return ret;
}
ret = phy_power_on(pcie->phy);
if (ret) {
dev_err(pcie->dev, "unable to power on PCIe PHY\n");
goto err_exit_phy;
}
switch (pcie->type) {
case IPROC_PCIE_PAXB:
pcie->reg_offsets = iproc_pcie_reg_paxb;
break;
case IPROC_PCIE_PAXC:
pcie->reg_offsets = iproc_pcie_reg_paxc;
break;
default:
dev_err(pcie->dev, "incompatible iProc PCIe interface\n");
ret = -EINVAL;
goto err_power_off_phy;
}
iproc_pcie_reset(pcie);
if (pcie->need_ob_cfg) {
ret = iproc_pcie_map_ranges(pcie, res);
if (ret) {
dev_err(pcie->dev, "map failed\n");
goto err_power_off_phy;
}
}
#ifdef CONFIG_ARM
pcie->sysdata.private_data = pcie;
sysdata = &pcie->sysdata;
#else
sysdata = pcie;
#endif
bus = pci_create_root_bus(pcie->dev, 0, &iproc_pcie_ops, sysdata, res);
if (!bus) {
dev_err(pcie->dev, "unable to create PCI root bus\n");
ret = -ENOMEM;
goto err_power_off_phy;
}
pcie->root_bus = bus;
ret = iproc_pcie_check_link(pcie, bus);
if (ret) {
dev_err(pcie->dev, "no PCIe EP device detected\n");
goto err_rm_root_bus;
}
iproc_pcie_enable(pcie);
PCI: iproc: Add iProc PCIe MSI support Add PCIe MSI support for both PAXB and PAXC interfaces on all iProc-based platforms. The iProc PCIe MSI support deploys an event queue-based implementation. Each event queue is serviced by a GIC interrupt and can support up to 64 MSI vectors. Host memory is allocated for the event queues, and each event queue consists of 64 word-sized entries. MSI data is written to the lower 16-bit of each entry, whereas the upper 16-bit of the entry is reserved for the controller for internal processing. Each event queue is tracked by a head pointer and tail pointer. Head pointer indicates the next entry in the event queue to be processed by the driver and is updated by the driver after processing is done. The controller uses the tail pointer as the next MSI data insertion point. The controller ensures MSI data is flushed to host memory before updating the tail pointer and then triggering the interrupt. MSI IRQ affinity is supported by evenly distributing the interrupts to each CPU core. MSI vector is moved from one GIC interrupt to another in order to steer to the target CPU. Therefore, the actual number of supported MSI vectors is: M * 64 / N where M denotes the number of GIC interrupts (event queues), and N denotes the number of CPU cores. This iProc event queue-based MSI support should not be used with newer platforms with integrated MSI support in the GIC (e.g., giv2m or gicv3-its). [bhelgaas: fold in Kconfig fixes from Arnd Bergmann <arnd@arndb.de>] Signed-off-by: Ray Jui <rjui@broadcom.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Anup Patel <anup.patel@broadcom.com> Reviewed-by: Vikram Prakash <vikramp@broadcom.com> Reviewed-by: Scott Branden <sbranden@broadcom.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
2016-01-06 17:04:35 -07:00
if (IS_ENABLED(CONFIG_PCI_MSI))
if (iproc_pcie_msi_enable(pcie))
dev_info(pcie->dev, "not using iProc MSI\n");
pci_scan_child_bus(bus);
pci_assign_unassigned_bus_resources(bus);
pci_fixup_irqs(pci_common_swizzle, pcie->map_irq);
pci_bus_add_devices(bus);
return 0;
err_rm_root_bus:
pci_stop_root_bus(bus);
pci_remove_root_bus(bus);
err_power_off_phy:
phy_power_off(pcie->phy);
err_exit_phy:
phy_exit(pcie->phy);
return ret;
}
EXPORT_SYMBOL(iproc_pcie_setup);
int iproc_pcie_remove(struct iproc_pcie *pcie)
{
pci_stop_root_bus(pcie->root_bus);
pci_remove_root_bus(pcie->root_bus);
PCI: iproc: Add iProc PCIe MSI support Add PCIe MSI support for both PAXB and PAXC interfaces on all iProc-based platforms. The iProc PCIe MSI support deploys an event queue-based implementation. Each event queue is serviced by a GIC interrupt and can support up to 64 MSI vectors. Host memory is allocated for the event queues, and each event queue consists of 64 word-sized entries. MSI data is written to the lower 16-bit of each entry, whereas the upper 16-bit of the entry is reserved for the controller for internal processing. Each event queue is tracked by a head pointer and tail pointer. Head pointer indicates the next entry in the event queue to be processed by the driver and is updated by the driver after processing is done. The controller uses the tail pointer as the next MSI data insertion point. The controller ensures MSI data is flushed to host memory before updating the tail pointer and then triggering the interrupt. MSI IRQ affinity is supported by evenly distributing the interrupts to each CPU core. MSI vector is moved from one GIC interrupt to another in order to steer to the target CPU. Therefore, the actual number of supported MSI vectors is: M * 64 / N where M denotes the number of GIC interrupts (event queues), and N denotes the number of CPU cores. This iProc event queue-based MSI support should not be used with newer platforms with integrated MSI support in the GIC (e.g., giv2m or gicv3-its). [bhelgaas: fold in Kconfig fixes from Arnd Bergmann <arnd@arndb.de>] Signed-off-by: Ray Jui <rjui@broadcom.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Anup Patel <anup.patel@broadcom.com> Reviewed-by: Vikram Prakash <vikramp@broadcom.com> Reviewed-by: Scott Branden <sbranden@broadcom.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
2016-01-06 17:04:35 -07:00
iproc_pcie_msi_disable(pcie);
phy_power_off(pcie->phy);
phy_exit(pcie->phy);
return 0;
}
EXPORT_SYMBOL(iproc_pcie_remove);
MODULE_AUTHOR("Ray Jui <rjui@broadcom.com>");
MODULE_DESCRIPTION("Broadcom iPROC PCIe common driver");
MODULE_LICENSE("GPL v2");