redonkable
/
remarkable-linux
1
0
Fork 0
Code Releases Activity
remarkable-linux/net/ipv6/datagram.c

1037 lines
24 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
/*
* common UDP/RAW code
[NET] IPV6: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 07:24:49 -07:00
* Linux INET6 implementation
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
*
* Authors:
[NET] IPV6: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 07:24:49 -07:00
* Pedro Roque <roque@di.fc.ul.pt>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
[PATCH] capable/capability.h (net/) net: Use <linux/capability.h> where capable() is used. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-11 13:17:47 -07:00
#include <linux/capability.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
#include <linux/errno.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/socket.h>
#include <linux/sockios.h>
#include <linux/in6.h>
#include <linux/ipv6.h>
#include <linux/route.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 02:04:11 -06:00
#include <linux/slab.h>
ipv6: Export ipv6 functions for use by other protocols For implementing other protocols on top of IPv6, such as L2TPv3's IP encapsulation over ipv6, we'd like to call some IPv6 functions which are not currently exported. This patch exports them. Signed-off-by: Chris Elston <celston@katalix.com> Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-29 15:48:53 -06:00
#include <linux/export.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
#include <net/ipv6.h>
#include <net/ndisc.h>
#include <net/addrconf.h>
#include <net/transp_v6.h>
#include <net/ip6_route.h>
[TCP]: Move the tcp sock states to net/tcp_states.h Lots of places just needs the states, not even linux/tcp.h, where this enum was, needs it. This speeds up development of the refactorings as less sources are rebuilt when things get moved from net/tcp.h. Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-09 21:08:28 -06:00
#include <net/tcp_states.h>
ipv6: Use ipv6_get_dsfield() instead of ipv6_tclass(). Commit 7a3198a8 ("ipv6: helper function to get tclass") introduced ipv6_tclass(), but similar function is already available as ipv6_get_dsfield(). We might be able to call ipv6_tclass() from ipv6_get_dsfield(), but it is confusing to have two versions. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-12 22:02:01 -07:00
#include <net/dsfield.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
#include <linux/errqueue.h>
#include <asm/uaccess.h>
ipv6: bool/const conversions phase2 Mostly bool conversions, some inline removals and const additions. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-18 12:57:34 -06:00
static bool ipv6_mapped_addr_any(const struct in6_addr *a)
ipv6: check for IPv4 mapped addresses when connecting IPv6 sockets When support for binding to 'mapped INADDR_ANY (::ffff.0.0.0.0)' was added in 0f8d3c7ac3693d7b6c731bf2159273a59bf70e12 the rest of the code wasn't told so now it's possible to bind IPv6 datagram socket to ::ffff.0.0.0.0, connect it to another IPv4 address and it will all work except for getsockhame() which does not return the local address as expected. To give getsockname() something to work with check for 'mapped INADDR_ANY' when connecting and update the in-core source addresses appropriately. Signed-off-by: Max Matveev <makc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-05 04:56:30 -06:00
{
ipv6: bool/const conversions phase2 Mostly bool conversions, some inline removals and const additions. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-18 12:57:34 -06:00
return ipv6_addr_v4mapped(a) && (a->s6_addr32[3] == 0);
ipv6: check for IPv4 mapped addresses when connecting IPv6 sockets When support for binding to 'mapped INADDR_ANY (::ffff.0.0.0.0)' was added in 0f8d3c7ac3693d7b6c731bf2159273a59bf70e12 the rest of the code wasn't told so now it's possible to bind IPv6 datagram socket to ::ffff.0.0.0.0, connect it to another IPv4 address and it will all work except for getsockhame() which does not return the local address as expected. To give getsockname() something to work with check for 'mapped INADDR_ANY' when connecting and update the in-core source addresses appropriately. Signed-off-by: Max Matveev <makc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-05 04:56:30 -06:00
}
ipv6: datagram: Refactor flowi6 init codes to a new function Move flowi6 init codes for connected datagram sk to a newly created function ip6_datagram_flow_key_init(). Notes: 1. fl6_flowlabel is used instead of fl6.flowlabel in __ip6_datagram_connect 2. ipv6_addr_is_multicast(&fl6->daddr) is used instead of (addr_type & IPV6_ADDR_MULTICAST) in ip6_datagram_flow_key_init() This new function will be reused during pmtu update in the later patch. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Wei Wang <weiwan@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-11 16:29:34 -06:00
static void ip6_datagram_flow_key_init(struct flowi6 *fl6, struct sock *sk)
{
struct inet_sock *inet = inet_sk(sk);
struct ipv6_pinfo *np = inet6_sk(sk);
memset(fl6, 0, sizeof(*fl6));
fl6->flowi6_proto = sk->sk_protocol;
fl6->daddr = sk->sk_v6_daddr;
fl6->saddr = np->saddr;
fl6->flowi6_oif = sk->sk_bound_dev_if;
fl6->flowi6_mark = sk->sk_mark;
fl6->fl6_dport = inet->inet_dport;
fl6->fl6_sport = inet->inet_sport;
fl6->flowlabel = np->flow_label;
if (!fl6->flowi6_oif)
fl6->flowi6_oif = np->sticky_pktinfo.ipi6_ifindex;
if (!fl6->flowi6_oif && ipv6_addr_is_multicast(&fl6->daddr))
fl6->flowi6_oif = np->mcast_oif;
security_sk_classify_flow(sk, flowi6_to_flowi(fl6));
}
ipv6: datagram: Update dst cache of a connected datagram sk during pmtu update There is a case in connected UDP socket such that getsockopt(IPV6_MTU) will return a stale MTU value. The reproducible sequence could be the following: 1. Create a connected UDP socket 2. Send some datagrams out 3. Receive a ICMPV6_PKT_TOOBIG 4. No new outgoing datagrams to trigger the sk_dst_check() logic to update the sk->sk_dst_cache. 5. getsockopt(IPV6_MTU) returns the mtu from the invalid sk->sk_dst_cache instead of the newly created RTF_CACHE clone. This patch updates the sk->sk_dst_cache for a connected datagram sk during pmtu-update code path. Note that the sk->sk_v6_daddr is used to do the route lookup instead of skb->data (i.e. iph). It is because a UDP socket can become connected after sending out some datagrams in un-connected state. or It can be connected multiple times to different destinations. Hence, iph may not be related to where sk is currently connected to. It is done under '!sock_owned_by_user(sk)' condition because the user may make another ip6_datagram_connect() (i.e changing the sk->sk_v6_daddr) while dst lookup is happening in the pmtu-update code path. For the sock_owned_by_user(sk) == true case, the next patch will introduce a release_cb() which will update the sk->sk_dst_cache. Test: Server (Connected UDP Socket): ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Route Details: [root@arch-fb-vm1 ~]# ip -6 r show | egrep '2fac' 2fac::/64 dev eth0 proto kernel metric 256 pref medium 2fac:face::/64 via 2fac::face dev eth0 metric 1024 pref medium A simple python code to create a connected UDP socket: import socket import errno HOST = '2fac::1' PORT = 8080 s = socket.socket(socket.AF_INET6, socket.SOCK_DGRAM) s.bind((HOST, PORT)) s.connect(('2fac:face::face', 53)) print("connected") while True: try: data = s.recv(1024) except socket.error as se: if se.errno == errno.EMSGSIZE: pmtu = s.getsockopt(41, 24) print("PMTU:%d" % pmtu) break s.close() Python program output after getting a ICMPV6_PKT_TOOBIG: [root@arch-fb-vm1 ~]# python2 ~/devshare/kernel/tasks/fib6/udp-connect-53-8080.py connected PMTU:1300 Cache routes after recieving TOOBIG: [root@arch-fb-vm1 ~]# ip -6 r show table cache 2fac:face::face via 2fac::face dev eth0 metric 0 cache expires 463sec mtu 1300 pref medium Client (Send the ICMPV6_PKT_TOOBIG): ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ scapy is used to generate the TOOBIG message. Here is the scapy script I have used: >>> p=Ether(src='da:75:4d:36:ac:32', dst='52:54:00:12:34:66', type=0x86dd)/IPv6(src='2fac::face', dst='2fac::1')/ICMPv6PacketTooBig(mtu=1300)/IPv6(src='2fac:: 1',dst='2fac:face::face', nh='UDP')/UDP(sport=8080,dport=53) >>> sendp(p, iface='qemubr0') Fixes: 45e4fd26683c ("ipv6: Only create RTF_CACHE routes after encountering pmtu exception") Signed-off-by: Martin KaFai Lau <kafai@fb.com> Reported-by: Wei Wang <weiwan@google.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Wei Wang <weiwan@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-11 16:29:36 -06:00
int ip6_datagram_dst_update(struct sock *sk, bool fix_sk_saddr)
ipv6: datagram: Refactor dst lookup and update codes to a new function This patch moves the route lookup and update codes for connected datagram sk to a newly created function ip6_datagram_dst_update() It will be reused during the pmtu update in the later patch. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Wei Wang <weiwan@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-11 16:29:35 -06:00
{
struct ip6_flowlabel *flowlabel = NULL;
struct in6_addr *final_p, final;
struct ipv6_txoptions *opt;
struct dst_entry *dst;
struct inet_sock *inet = inet_sk(sk);
struct ipv6_pinfo *np = inet6_sk(sk);
struct flowi6 fl6;
int err = 0;
if (np->sndflow && (np->flow_label & IPV6_FLOWLABEL_MASK)) {
flowlabel = fl6_sock_lookup(sk, np->flow_label);
if (!flowlabel)
return -EINVAL;
}
ip6_datagram_flow_key_init(&fl6, sk);
rcu_read_lock();
opt = flowlabel ? flowlabel->opt : rcu_dereference(np->opt);
final_p = fl6_update_dst(&fl6, opt, &final);
rcu_read_unlock();
dst = ip6_dst_lookup_flow(sk, &fl6, final_p);
if (IS_ERR(dst)) {
err = PTR_ERR(dst);
goto out;
}
ipv6: datagram: Update dst cache of a connected datagram sk during pmtu update There is a case in connected UDP socket such that getsockopt(IPV6_MTU) will return a stale MTU value. The reproducible sequence could be the following: 1. Create a connected UDP socket 2. Send some datagrams out 3. Receive a ICMPV6_PKT_TOOBIG 4. No new outgoing datagrams to trigger the sk_dst_check() logic to update the sk->sk_dst_cache. 5. getsockopt(IPV6_MTU) returns the mtu from the invalid sk->sk_dst_cache instead of the newly created RTF_CACHE clone. This patch updates the sk->sk_dst_cache for a connected datagram sk during pmtu-update code path. Note that the sk->sk_v6_daddr is used to do the route lookup instead of skb->data (i.e. iph). It is because a UDP socket can become connected after sending out some datagrams in un-connected state. or It can be connected multiple times to different destinations. Hence, iph may not be related to where sk is currently connected to. It is done under '!sock_owned_by_user(sk)' condition because the user may make another ip6_datagram_connect() (i.e changing the sk->sk_v6_daddr) while dst lookup is happening in the pmtu-update code path. For the sock_owned_by_user(sk) == true case, the next patch will introduce a release_cb() which will update the sk->sk_dst_cache. Test: Server (Connected UDP Socket): ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Route Details: [root@arch-fb-vm1 ~]# ip -6 r show | egrep '2fac' 2fac::/64 dev eth0 proto kernel metric 256 pref medium 2fac:face::/64 via 2fac::face dev eth0 metric 1024 pref medium A simple python code to create a connected UDP socket: import socket import errno HOST = '2fac::1' PORT = 8080 s = socket.socket(socket.AF_INET6, socket.SOCK_DGRAM) s.bind((HOST, PORT)) s.connect(('2fac:face::face', 53)) print("connected") while True: try: data = s.recv(1024) except socket.error as se: if se.errno == errno.EMSGSIZE: pmtu = s.getsockopt(41, 24) print("PMTU:%d" % pmtu) break s.close() Python program output after getting a ICMPV6_PKT_TOOBIG: [root@arch-fb-vm1 ~]# python2 ~/devshare/kernel/tasks/fib6/udp-connect-53-8080.py connected PMTU:1300 Cache routes after recieving TOOBIG: [root@arch-fb-vm1 ~]# ip -6 r show table cache 2fac:face::face via 2fac::face dev eth0 metric 0 cache expires 463sec mtu 1300 pref medium Client (Send the ICMPV6_PKT_TOOBIG): ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ scapy is used to generate the TOOBIG message. Here is the scapy script I have used: >>> p=Ether(src='da:75:4d:36:ac:32', dst='52:54:00:12:34:66', type=0x86dd)/IPv6(src='2fac::face', dst='2fac::1')/ICMPv6PacketTooBig(mtu=1300)/IPv6(src='2fac:: 1',dst='2fac:face::face', nh='UDP')/UDP(sport=8080,dport=53) >>> sendp(p, iface='qemubr0') Fixes: 45e4fd26683c ("ipv6: Only create RTF_CACHE routes after encountering pmtu exception") Signed-off-by: Martin KaFai Lau <kafai@fb.com> Reported-by: Wei Wang <weiwan@google.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Wei Wang <weiwan@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-11 16:29:36 -06:00
if (fix_sk_saddr) {
if (ipv6_addr_any(&np->saddr))
np->saddr = fl6.saddr;
ipv6: datagram: Refactor dst lookup and update codes to a new function This patch moves the route lookup and update codes for connected datagram sk to a newly created function ip6_datagram_dst_update() It will be reused during the pmtu update in the later patch. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Wei Wang <weiwan@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-11 16:29:35 -06:00
ipv6: datagram: Update dst cache of a connected datagram sk during pmtu update There is a case in connected UDP socket such that getsockopt(IPV6_MTU) will return a stale MTU value. The reproducible sequence could be the following: 1. Create a connected UDP socket 2. Send some datagrams out 3. Receive a ICMPV6_PKT_TOOBIG 4. No new outgoing datagrams to trigger the sk_dst_check() logic to update the sk->sk_dst_cache. 5. getsockopt(IPV6_MTU) returns the mtu from the invalid sk->sk_dst_cache instead of the newly created RTF_CACHE clone. This patch updates the sk->sk_dst_cache for a connected datagram sk during pmtu-update code path. Note that the sk->sk_v6_daddr is used to do the route lookup instead of skb->data (i.e. iph). It is because a UDP socket can become connected after sending out some datagrams in un-connected state. or It can be connected multiple times to different destinations. Hence, iph may not be related to where sk is currently connected to. It is done under '!sock_owned_by_user(sk)' condition because the user may make another ip6_datagram_connect() (i.e changing the sk->sk_v6_daddr) while dst lookup is happening in the pmtu-update code path. For the sock_owned_by_user(sk) == true case, the next patch will introduce a release_cb() which will update the sk->sk_dst_cache. Test: Server (Connected UDP Socket): ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Route Details: [root@arch-fb-vm1 ~]# ip -6 r show | egrep '2fac' 2fac::/64 dev eth0 proto kernel metric 256 pref medium 2fac:face::/64 via 2fac::face dev eth0 metric 1024 pref medium A simple python code to create a connected UDP socket: import socket import errno HOST = '2fac::1' PORT = 8080 s = socket.socket(socket.AF_INET6, socket.SOCK_DGRAM) s.bind((HOST, PORT)) s.connect(('2fac:face::face', 53)) print("connected") while True: try: data = s.recv(1024) except socket.error as se: if se.errno == errno.EMSGSIZE: pmtu = s.getsockopt(41, 24) print("PMTU:%d" % pmtu) break s.close() Python program output after getting a ICMPV6_PKT_TOOBIG: [root@arch-fb-vm1 ~]# python2 ~/devshare/kernel/tasks/fib6/udp-connect-53-8080.py connected PMTU:1300 Cache routes after recieving TOOBIG: [root@arch-fb-vm1 ~]# ip -6 r show table cache 2fac:face::face via 2fac::face dev eth0 metric 0 cache expires 463sec mtu 1300 pref medium Client (Send the ICMPV6_PKT_TOOBIG): ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ scapy is used to generate the TOOBIG message. Here is the scapy script I have used: >>> p=Ether(src='da:75:4d:36:ac:32', dst='52:54:00:12:34:66', type=0x86dd)/IPv6(src='2fac::face', dst='2fac::1')/ICMPv6PacketTooBig(mtu=1300)/IPv6(src='2fac:: 1',dst='2fac:face::face', nh='UDP')/UDP(sport=8080,dport=53) >>> sendp(p, iface='qemubr0') Fixes: 45e4fd26683c ("ipv6: Only create RTF_CACHE routes after encountering pmtu exception") Signed-off-by: Martin KaFai Lau <kafai@fb.com> Reported-by: Wei Wang <weiwan@google.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Wei Wang <weiwan@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-11 16:29:36 -06:00
if (ipv6_addr_any(&sk->sk_v6_rcv_saddr)) {
sk->sk_v6_rcv_saddr = fl6.saddr;
inet->inet_rcv_saddr = LOOPBACK4_IPV6;
if (sk->sk_prot->rehash)
sk->sk_prot->rehash(sk);
}
ipv6: datagram: Refactor dst lookup and update codes to a new function This patch moves the route lookup and update codes for connected datagram sk to a newly created function ip6_datagram_dst_update() It will be reused during the pmtu update in the later patch. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Wei Wang <weiwan@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-11 16:29:35 -06:00
}
ip6_dst_store(sk, dst,
ipv6_addr_equal(&fl6.daddr, &sk->sk_v6_daddr) ?
&sk->sk_v6_daddr : NULL,
#ifdef CONFIG_IPV6_SUBTREES
ipv6_addr_equal(&fl6.saddr, &np->saddr) ?
&np->saddr :
#endif
NULL);
out:
fl6_sock_release(flowlabel);
return err;
}
ipv6: udp: Do a route lookup and update during release_cb This patch adds a release_cb for UDPv6. It does a route lookup and updates sk->sk_dst_cache if it is needed. It picks up the left-over job from ip6_sk_update_pmtu() if the sk was owned by user during the pmtu update. It takes a rcu_read_lock to protect the __sk_dst_get() operations because another thread may do ip6_dst_store() without taking the sk lock (e.g. sendmsg). Fixes: 45e4fd26683c ("ipv6: Only create RTF_CACHE routes after encountering pmtu exception") Signed-off-by: Martin KaFai Lau <kafai@fb.com> Reported-by: Wei Wang <weiwan@google.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Wei Wang <weiwan@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-11 16:29:37 -06:00
void ip6_datagram_release_cb(struct sock *sk)
{
struct dst_entry *dst;
if (ipv6_addr_v4mapped(&sk->sk_v6_daddr))
return;
rcu_read_lock();
dst = __sk_dst_get(sk);
if (!dst || !dst->obsolete ||
dst->ops->check(dst, inet6_sk(sk)->dst_cookie)) {
rcu_read_unlock();
return;
}
rcu_read_unlock();
ip6_datagram_dst_update(sk, false);
}
EXPORT_SYMBOL_GPL(ip6_datagram_release_cb);
ipv6: lock socket in ip6_datagram_connect() ip6_datagram_connect() is doing a lot of socket changes without socket being locked. This looks wrong, at least for udp_lib_rehash() which could corrupt lists because of concurrent udp_sk(sk)->udp_portaddr_hash accesses. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-14 00:10:22 -06:00
static int __ip6_datagram_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
{
struct sockaddr_in6 *usin = (struct sockaddr_in6 *) uaddr;
ipv6: White-space cleansing : Line Layouts This patch makes no changes to the logic of the code but simply addresses coding style issues as detected by checkpatch. Both objdump and diff -w show no differences. A number of items are addressed in this patch: * Multiple spaces converted to tabs * Spaces before tabs removed. * Spaces in pointer typing cleansed (char *)foo etc. * Remove space after sizeof * Ensure spacing around comparators such as if statements. Signed-off-by: Ian Morris <ipm@chirality.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-24 14:53:10 -06:00
struct inet_sock *inet = inet_sk(sk);
struct ipv6_pinfo *np = inet6_sk(sk);
ipv6: datagram: Refactor dst lookup and update codes to a new function This patch moves the route lookup and update codes for connected datagram sk to a newly created function ip6_datagram_dst_update() It will be reused during the pmtu update in the later patch. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Wei Wang <weiwan@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-11 16:29:35 -06:00
struct in6_addr *daddr;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
int addr_type;
int err;
ipv6: datagram: Refactor flowi6 init codes to a new function Move flowi6 init codes for connected datagram sk to a newly created function ip6_datagram_flow_key_init(). Notes: 1. fl6_flowlabel is used instead of fl6.flowlabel in __ip6_datagram_connect 2. ipv6_addr_is_multicast(&fl6->daddr) is used instead of (addr_type & IPV6_ADDR_MULTICAST) in ip6_datagram_flow_key_init() This new function will be reused during pmtu update in the later patch. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Wei Wang <weiwan@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-11 16:29:34 -06:00
__be32 fl6_flowlabel = 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
if (usin->sin6_family == AF_INET) {
if (__ipv6_only_sock(sk))
return -EAFNOSUPPORT;
ipv6: lock socket in ip6_datagram_connect() ip6_datagram_connect() is doing a lot of socket changes without socket being locked. This looks wrong, at least for udp_lib_rehash() which could corrupt lists because of concurrent udp_sk(sk)->udp_portaddr_hash accesses. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-14 00:10:22 -06:00
err = __ip4_datagram_connect(sk, uaddr, addr_len);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
goto ipv4_connected;
}
if (addr_len < SIN6_LEN_RFC2133)
[NET] IPV6: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 07:24:49 -07:00
return -EINVAL;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
[NET] IPV6: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 07:24:49 -07:00
if (usin->sin6_family != AF_INET6)
return -EAFNOSUPPORT;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
ipv6: datagram: Refactor dst lookup and update codes to a new function This patch moves the route lookup and update codes for connected datagram sk to a newly created function ip6_datagram_dst_update() It will be reused during the pmtu update in the later patch. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Wei Wang <weiwan@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-11 16:29:35 -06:00
if (np->sndflow)
ipv6: datagram: Refactor flowi6 init codes to a new function Move flowi6 init codes for connected datagram sk to a newly created function ip6_datagram_flow_key_init(). Notes: 1. fl6_flowlabel is used instead of fl6.flowlabel in __ip6_datagram_connect 2. ipv6_addr_is_multicast(&fl6->daddr) is used instead of (addr_type & IPV6_ADDR_MULTICAST) in ip6_datagram_flow_key_init() This new function will be reused during pmtu update in the later patch. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Wei Wang <weiwan@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-11 16:29:34 -06:00
fl6_flowlabel = usin->sin6_flowinfo & IPV6_FLOWINFO_MASK;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
addr_type = ipv6_addr_type(&usin->sin6_addr);
if (addr_type == IPV6_ADDR_ANY) {
/*
* connect to self
*/
usin->sin6_addr.s6_addr[15] = 0x01;
}
daddr = &usin->sin6_addr;
if (addr_type == IPV6_ADDR_MAPPED) {
struct sockaddr_in sin;
if (__ipv6_only_sock(sk)) {
err = -ENETUNREACH;
goto out;
}
sin.sin_family = AF_INET;
sin.sin_addr.s_addr = daddr->s6_addr32[3];
sin.sin_port = usin->sin6_port;
ipv6: lock socket in ip6_datagram_connect() ip6_datagram_connect() is doing a lot of socket changes without socket being locked. This looks wrong, at least for udp_lib_rehash() which could corrupt lists because of concurrent udp_sk(sk)->udp_portaddr_hash accesses. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-14 00:10:22 -06:00
err = __ip4_datagram_connect(sk,
(struct sockaddr *) &sin,
sizeof(sin));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
ipv4_connected:
if (err)
goto out;
[NET] IPV6: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 07:24:49 -07:00
ipv6: make lookups simpler and faster TCP listener refactoring, part 4 : To speed up inet lookups, we moved IPv4 addresses from inet to struct sock_common Now is time to do the same for IPv6, because it permits us to have fast lookups for all kind of sockets, including upcoming SYN_RECV. Getting IPv6 addresses in TCP lookups currently requires two extra cache lines, plus a dereference (and memory stall). inet6_sk(sk) does the dereference of inet_sk(__sk)->pinet6 This patch is way bigger than its IPv4 counter part, because for IPv4, we could add aliases (inet_daddr, inet_rcv_saddr), while on IPv6, it's not doable easily. inet6_sk(sk)->daddr becomes sk->sk_v6_daddr inet6_sk(sk)->rcv_saddr becomes sk->sk_v6_rcv_saddr And timewait socket also have tw->tw_v6_daddr & tw->tw_v6_rcv_saddr at the same offset. We get rid of INET6_TW_MATCH() as INET6_MATCH() is now the generic macro. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-03 16:42:29 -06:00
ipv6_addr_set_v4mapped(inet->inet_daddr, &sk->sk_v6_daddr);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
ipv6: check for IPv4 mapped addresses when connecting IPv6 sockets When support for binding to 'mapped INADDR_ANY (::ffff.0.0.0.0)' was added in 0f8d3c7ac3693d7b6c731bf2159273a59bf70e12 the rest of the code wasn't told so now it's possible to bind IPv6 datagram socket to ::ffff.0.0.0.0, connect it to another IPv4 address and it will all work except for getsockhame() which does not return the local address as expected. To give getsockname() something to work with check for 'mapped INADDR_ANY' when connecting and update the in-core source addresses appropriately. Signed-off-by: Max Matveev <makc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-05 04:56:30 -06:00
if (ipv6_addr_any(&np->saddr) ||
ipv6_mapped_addr_any(&np->saddr))
inet: rename some inet_sock fields In order to have better cache layouts of struct sock (separate zones for rx/tx paths), we need this preliminary patch. Goal is to transfert fields used at lookup time in the first read-mostly cache line (inside struct sock_common) and move sk_refcnt to a separate cache line (only written by rx path) This patch adds inet_ prefix to daddr, rcv_saddr, dport, num, saddr, sport and id fields. This allows a future patch to define these fields as macros, like sk_refcnt, without name clashes. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-15 00:30:45 -06:00
ipv6_addr_set_v4mapped(inet->inet_saddr, &np->saddr);
IPv6: use ipv6_addr_set_v4mapped() Might as well use the ipv6_addr_set_v4mapped() inline we created last year. Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07 14:58:25 -06:00
ipv6: make lookups simpler and faster TCP listener refactoring, part 4 : To speed up inet lookups, we moved IPv4 addresses from inet to struct sock_common Now is time to do the same for IPv6, because it permits us to have fast lookups for all kind of sockets, including upcoming SYN_RECV. Getting IPv6 addresses in TCP lookups currently requires two extra cache lines, plus a dereference (and memory stall). inet6_sk(sk) does the dereference of inet_sk(__sk)->pinet6 This patch is way bigger than its IPv4 counter part, because for IPv4, we could add aliases (inet_daddr, inet_rcv_saddr), while on IPv6, it's not doable easily. inet6_sk(sk)->daddr becomes sk->sk_v6_daddr inet6_sk(sk)->rcv_saddr becomes sk->sk_v6_rcv_saddr And timewait socket also have tw->tw_v6_daddr & tw->tw_v6_rcv_saddr at the same offset. We get rid of INET6_TW_MATCH() as INET6_MATCH() is now the generic macro. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-03 16:42:29 -06:00
if (ipv6_addr_any(&sk->sk_v6_rcv_saddr) ||
ipv6_mapped_addr_any(&sk->sk_v6_rcv_saddr)) {
inet: rename some inet_sock fields In order to have better cache layouts of struct sock (separate zones for rx/tx paths), we need this preliminary patch. Goal is to transfert fields used at lookup time in the first read-mostly cache line (inside struct sock_common) and move sk_refcnt to a separate cache line (only written by rx path) This patch adds inet_ prefix to daddr, rcv_saddr, dport, num, saddr, sport and id fields. This allows a future patch to define these fields as macros, like sk_refcnt, without name clashes. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-15 00:30:45 -06:00
ipv6_addr_set_v4mapped(inet->inet_rcv_saddr,
ipv6: make lookups simpler and faster TCP listener refactoring, part 4 : To speed up inet lookups, we moved IPv4 addresses from inet to struct sock_common Now is time to do the same for IPv6, because it permits us to have fast lookups for all kind of sockets, including upcoming SYN_RECV. Getting IPv6 addresses in TCP lookups currently requires two extra cache lines, plus a dereference (and memory stall). inet6_sk(sk) does the dereference of inet_sk(__sk)->pinet6 This patch is way bigger than its IPv4 counter part, because for IPv4, we could add aliases (inet_daddr, inet_rcv_saddr), while on IPv6, it's not doable easily. inet6_sk(sk)->daddr becomes sk->sk_v6_daddr inet6_sk(sk)->rcv_saddr becomes sk->sk_v6_rcv_saddr And timewait socket also have tw->tw_v6_daddr & tw->tw_v6_rcv_saddr at the same offset. We get rid of INET6_TW_MATCH() as INET6_MATCH() is now the generic macro. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-03 16:42:29 -06:00
&sk->sk_v6_rcv_saddr);
udp: add rehash on connect() commit 30fff923 introduced in linux-2.6.33 (udp: bind() optimisation) added a secondary hash on UDP, hashed on (local addr, local port). Problem is that following sequence : fd = socket(...) connect(fd, &remote, ...) not only selects remote end point (address and port), but also sets local address, while UDP stack stored in secondary hash table the socket while its local address was INADDR_ANY (or ipv6 equivalent) Sequence is : - autobind() : choose a random local port, insert socket in hash tables [while local address is INADDR_ANY] - connect() : set remote address and port, change local address to IP given by a route lookup. When an incoming UDP frame comes, if more than 10 sockets are found in primary hash table, we switch to secondary table, and fail to find socket because its local address changed. One solution to this problem is to rehash datagram socket if needed. We add a new rehash(struct socket *) method in "struct proto", and implement this method for UDP v4 & v6, using a common helper. This rehashing only takes care of secondary hash table, since primary hash (based on local port only) is not changed. Reported-by: Krzysztof Piotr Oledzki <ole@ans.pl> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Tested-by: Krzysztof Piotr Oledzki <ole@ans.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-09-07 23:08:44 -06:00
if (sk->sk_prot->rehash)
sk->sk_prot->rehash(sk);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
goto out;
}
ipv6: use newly introduced __ipv6_addr_needs_scope_id and ipv6_iface_scope_id This patch requires multicast interface-scoped addresses to supply a sin6_scope_id. Because the sin6_scope_id is now also correctly used in case of interface-scoped multicast traffic this enables one to use interface scoped addresses over interfaces which are not targeted by the default multicast route (the route has to be put there manually, though). getsockname() and getpeername() now return the correct sin6_scope_id in case of interface-local mc addresses. v2: a) rebased ontop of patch 1/4 (now uses ipv6_addr_props) v3: a) reverted changes for ipv6_addr_props v4: a) unchanged Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>dave Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-07 19:07:19 -07:00
if (__ipv6_addr_needs_scope_id(addr_type)) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
if (addr_len >= sizeof(struct sockaddr_in6) &&
usin->sin6_scope_id) {
if (sk->sk_bound_dev_if &&
sk->sk_bound_dev_if != usin->sin6_scope_id) {
err = -EINVAL;
goto out;
}
sk->sk_bound_dev_if = usin->sin6_scope_id;
}
[IPV6]: IPV6_MULTICAST_IF setting is ignored on link-local connect() Signed-off-by: Brian Haley <brian.haley@hp.com> Acked-by: David L Stevens <dlstevens@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-09 00:52:21 -07:00
if (!sk->sk_bound_dev_if && (addr_type & IPV6_ADDR_MULTICAST))
sk->sk_bound_dev_if = np->mcast_oif;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
/* Connect to link-local address requires an interface */
if (!sk->sk_bound_dev_if) {
err = -EINVAL;
goto out;
}
}
ipv6: make lookups simpler and faster TCP listener refactoring, part 4 : To speed up inet lookups, we moved IPv4 addresses from inet to struct sock_common Now is time to do the same for IPv6, because it permits us to have fast lookups for all kind of sockets, including upcoming SYN_RECV. Getting IPv6 addresses in TCP lookups currently requires two extra cache lines, plus a dereference (and memory stall). inet6_sk(sk) does the dereference of inet_sk(__sk)->pinet6 This patch is way bigger than its IPv4 counter part, because for IPv4, we could add aliases (inet_daddr, inet_rcv_saddr), while on IPv6, it's not doable easily. inet6_sk(sk)->daddr becomes sk->sk_v6_daddr inet6_sk(sk)->rcv_saddr becomes sk->sk_v6_rcv_saddr And timewait socket also have tw->tw_v6_daddr & tw->tw_v6_rcv_saddr at the same offset. We get rid of INET6_TW_MATCH() as INET6_MATCH() is now the generic macro. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-03 16:42:29 -06:00
sk->sk_v6_daddr = *daddr;
ipv6: datagram: Refactor flowi6 init codes to a new function Move flowi6 init codes for connected datagram sk to a newly created function ip6_datagram_flow_key_init(). Notes: 1. fl6_flowlabel is used instead of fl6.flowlabel in __ip6_datagram_connect 2. ipv6_addr_is_multicast(&fl6->daddr) is used instead of (addr_type & IPV6_ADDR_MULTICAST) in ip6_datagram_flow_key_init() This new function will be reused during pmtu update in the later patch. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Wei Wang <weiwan@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-11 16:29:34 -06:00
np->flow_label = fl6_flowlabel;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
inet: rename some inet_sock fields In order to have better cache layouts of struct sock (separate zones for rx/tx paths), we need this preliminary patch. Goal is to transfert fields used at lookup time in the first read-mostly cache line (inside struct sock_common) and move sk_refcnt to a separate cache line (only written by rx path) This patch adds inet_ prefix to daddr, rcv_saddr, dport, num, saddr, sport and id fields. This allows a future patch to define these fields as macros, like sk_refcnt, without name clashes. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-15 00:30:45 -06:00
inet->inet_dport = usin->sin6_port;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
/*
* Check for a route to destination an obtain the
* destination cache for it.
*/
ipv6: datagram: Update dst cache of a connected datagram sk during pmtu update There is a case in connected UDP socket such that getsockopt(IPV6_MTU) will return a stale MTU value. The reproducible sequence could be the following: 1. Create a connected UDP socket 2. Send some datagrams out 3. Receive a ICMPV6_PKT_TOOBIG 4. No new outgoing datagrams to trigger the sk_dst_check() logic to update the sk->sk_dst_cache. 5. getsockopt(IPV6_MTU) returns the mtu from the invalid sk->sk_dst_cache instead of the newly created RTF_CACHE clone. This patch updates the sk->sk_dst_cache for a connected datagram sk during pmtu-update code path. Note that the sk->sk_v6_daddr is used to do the route lookup instead of skb->data (i.e. iph). It is because a UDP socket can become connected after sending out some datagrams in un-connected state. or It can be connected multiple times to different destinations. Hence, iph may not be related to where sk is currently connected to. It is done under '!sock_owned_by_user(sk)' condition because the user may make another ip6_datagram_connect() (i.e changing the sk->sk_v6_daddr) while dst lookup is happening in the pmtu-update code path. For the sock_owned_by_user(sk) == true case, the next patch will introduce a release_cb() which will update the sk->sk_dst_cache. Test: Server (Connected UDP Socket): ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Route Details: [root@arch-fb-vm1 ~]# ip -6 r show | egrep '2fac' 2fac::/64 dev eth0 proto kernel metric 256 pref medium 2fac:face::/64 via 2fac::face dev eth0 metric 1024 pref medium A simple python code to create a connected UDP socket: import socket import errno HOST = '2fac::1' PORT = 8080 s = socket.socket(socket.AF_INET6, socket.SOCK_DGRAM) s.bind((HOST, PORT)) s.connect(('2fac:face::face', 53)) print("connected") while True: try: data = s.recv(1024) except socket.error as se: if se.errno == errno.EMSGSIZE: pmtu = s.getsockopt(41, 24) print("PMTU:%d" % pmtu) break s.close() Python program output after getting a ICMPV6_PKT_TOOBIG: [root@arch-fb-vm1 ~]# python2 ~/devshare/kernel/tasks/fib6/udp-connect-53-8080.py connected PMTU:1300 Cache routes after recieving TOOBIG: [root@arch-fb-vm1 ~]# ip -6 r show table cache 2fac:face::face via 2fac::face dev eth0 metric 0 cache expires 463sec mtu 1300 pref medium Client (Send the ICMPV6_PKT_TOOBIG): ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ scapy is used to generate the TOOBIG message. Here is the scapy script I have used: >>> p=Ether(src='da:75:4d:36:ac:32', dst='52:54:00:12:34:66', type=0x86dd)/IPv6(src='2fac::face', dst='2fac::1')/ICMPv6PacketTooBig(mtu=1300)/IPv6(src='2fac:: 1',dst='2fac:face::face', nh='UDP')/UDP(sport=8080,dport=53) >>> sendp(p, iface='qemubr0') Fixes: 45e4fd26683c ("ipv6: Only create RTF_CACHE routes after encountering pmtu exception") Signed-off-by: Martin KaFai Lau <kafai@fb.com> Reported-by: Wei Wang <weiwan@google.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Wei Wang <weiwan@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-11 16:29:36 -06:00
err = ip6_datagram_dst_update(sk, true);
ipv6: datagram: Refactor dst lookup and update codes to a new function This patch moves the route lookup and update codes for connected datagram sk to a newly created function ip6_datagram_dst_update() It will be reused during the pmtu update in the later patch. Signed-off-by: Martin KaFai Lau <kafai@fb.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Wei Wang <weiwan@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-11 16:29:35 -06:00
if (err)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
goto out;
sk->sk_state = TCP_ESTABLISHED;
net: Set sk_txhash from a random number This patch creates sk_set_txhash and eliminates protocol specific inet_set_txhash and ip6_set_txhash. sk_set_txhash simply sets a random number instead of performing flow dissection. sk_set_txash is also allowed to be called multiple times for the same socket, we'll need this when redoing the hash for negative routing advice. Signed-off-by: Tom Herbert <tom@herbertland.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-28 17:02:05 -06:00
sk_set_txhash(sk);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
out:
return err;
}
ipv6: lock socket in ip6_datagram_connect() ip6_datagram_connect() is doing a lot of socket changes without socket being locked. This looks wrong, at least for udp_lib_rehash() which could corrupt lists because of concurrent udp_sk(sk)->udp_portaddr_hash accesses. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-14 00:10:22 -06:00
int ip6_datagram_connect(struct sock *sk, struct sockaddr *uaddr, int addr_len)
{
int res;
lock_sock(sk);
res = __ip6_datagram_connect(sk, uaddr, addr_len);
release_sock(sk);
return res;
}
ipv6: Export ipv6 functions for use by other protocols For implementing other protocols on top of IPv6, such as L2TPv3's IP encapsulation over ipv6, we'd like to call some IPv6 functions which are not currently exported. This patch exports them. Signed-off-by: Chris Elston <celston@katalix.com> Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-29 15:48:53 -06:00
EXPORT_SYMBOL_GPL(ip6_datagram_connect);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
ipv6: protect protocols not handling ipv4 from v4 connection/bind attempts Some ipv6 protocols cannot handle ipv4 addresses, so we must not allow connecting and binding to them. sendmsg logic does already check msg->name for this but must trust already connected sockets which could be set up for connection to ipv4 address family. Per-socket flag ipv6only is of no use here, as it is under users control by setsockopt. Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-19 21:16:39 -07:00
int ip6_datagram_connect_v6_only(struct sock *sk, struct sockaddr *uaddr,
int addr_len)
{
DECLARE_SOCKADDR(struct sockaddr_in6 *, sin6, uaddr);
if (sin6->sin6_family != AF_INET6)
return -EAFNOSUPPORT;
return ip6_datagram_connect(sk, uaddr, addr_len);
}
EXPORT_SYMBOL_GPL(ip6_datagram_connect_v6_only);
[NET] IPV6: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 07:24:49 -07:00
void ipv6_icmp_error(struct sock *sk, struct sk_buff *skb, int err,
[IPV6]: Misc endianness annotations. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-14 21:56:00 -07:00
__be16 port, u32 info, u8 *payload)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
{
struct ipv6_pinfo *np = inet6_sk(sk);
[ICMP6]: Introduce icmp6_hdr() For consistency with all the other skb->h.raw accessors. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-13 11:03:22 -06:00
struct icmp6hdr *icmph = icmp6_hdr(skb);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
struct sock_exterr_skb *serr;
if (!np->recverr)
return;
skb = skb_clone(skb, GFP_ATOMIC);
if (!skb)
return;
IPv6: fix IPV6_RECVERR handling of locally-generated errors I noticed when I added support for IPV6_DONTFRAG that if you set IPV6_RECVERR and tried to send a UDP packet larger than 64K to an IPv6 destination, you'd correctly get an EMSGSIZE, but reading from MSG_ERRQUEUE returned the incorrect address in the cmsg: struct msghdr: msg_name 0x7fff8f3c96d0 msg_namelen 28 struct sockaddr_in6: sin6_family 10 sin6_port 7639 sin6_flowinfo 0 sin6_addr ::ffff:38.32.0.0 sin6_scope_id 0 ((null)) It should have returned this in my case: struct msghdr: msg_name 0x7fffd866b510 msg_namelen 28 struct sockaddr_in6: sin6_family 10 sin6_port 7639 sin6_flowinfo 0 sin6_addr 2620:0:a09:e000:21f:29ff:fe57:f88b sin6_scope_id 0 ((null)) The problem is that ipv6_recv_error() assumes that if the error wasn't generated by ICMPv6, it's an IPv4 address sitting there, and proceeds to create a v4-mapped address from it. Change ipv6_icmp_error() and ipv6_local_error() to set skb->protocol to htons(ETH_P_IPV6) so that ipv6_recv_error() knows the address sitting right after the extended error is IPv6, else it will incorrectly map the first octet into an IPv4-mapped IPv6 address in the cmsg structure returned in a recvmsg() call to obtain the error. Signed-off-by: Brian Haley <brian.haley@hp.com> -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-03 09:44:27 -06:00
skb->protocol = htons(ETH_P_IPV6);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
serr = SKB_EXT_ERR(skb);
serr->ee.ee_errno = err;
serr->ee.ee_origin = SO_EE_ORIGIN_ICMP6;
[NET] IPV6: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 07:24:49 -07:00
serr->ee.ee_type = icmph->icmp6_type;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
serr->ee.ee_code = icmph->icmp6_code;
serr->ee.ee_pad = 0;
serr->ee.ee_info = info;
serr->ee.ee_data = 0;
[SK_BUFF]: Introduce skb_network_header() For the places where we need a pointer to the network header, it is still legal to touch skb->nh.raw directly if just adding to, subtracting from or setting it to another layer header. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-10 21:50:43 -06:00
serr->addr_offset = (u8 *)&(((struct ipv6hdr *)(icmph + 1))->daddr) -
skb_network_header(skb);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
serr->port = port;
__skb_pull(skb, payload - skb->data);
[SK_BUFF]: More skb_reset_transport_header conversions These are a bit more subtle, they are of this type: - skb->h.raw = payload; __skb_pull(skb, payload - skb->data); + skb_reset_transport_header(skb); __skb_pull results in: skb->data = skb->data + payload - skb->data; skb->data = payload; So after __skb_pull we have skb->data pointing to payload and we can just call skb_reset_transport_header(skb), that will do: skb->h.raw = payload; The others are similar, allowing us to get rid of some more cases where a pointer was being attributed to the layer headers. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-13 14:10:43 -06:00
skb_reset_transport_header(skb);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
if (sock_queue_err_skb(sk, skb))
kfree_skb(skb);
}
ipv6: Convert to use flowi6 where applicable. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-12 14:22:43 -07:00
void ipv6_local_error(struct sock *sk, int err, struct flowi6 *fl6, u32 info)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
{
ipv6: constify ip6_xmit() sock argument This is to document that socket lock might not be held at this point. skb_set_owner_w() and ipv6_local_error() are using proper atomic ops or spinlocks, so we promote the socket to non const when calling them. netfilter hooks should never assume socket lock is held, we also promote the socket to non const. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-25 08:39:20 -06:00
const struct ipv6_pinfo *np = inet6_sk(sk);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
struct sock_exterr_skb *serr;
struct ipv6hdr *iph;
struct sk_buff *skb;
if (!np->recverr)
return;
skb = alloc_skb(sizeof(struct ipv6hdr), GFP_ATOMIC);
if (!skb)
return;
IPv6: fix IPV6_RECVERR handling of locally-generated errors I noticed when I added support for IPV6_DONTFRAG that if you set IPV6_RECVERR and tried to send a UDP packet larger than 64K to an IPv6 destination, you'd correctly get an EMSGSIZE, but reading from MSG_ERRQUEUE returned the incorrect address in the cmsg: struct msghdr: msg_name 0x7fff8f3c96d0 msg_namelen 28 struct sockaddr_in6: sin6_family 10 sin6_port 7639 sin6_flowinfo 0 sin6_addr ::ffff:38.32.0.0 sin6_scope_id 0 ((null)) It should have returned this in my case: struct msghdr: msg_name 0x7fffd866b510 msg_namelen 28 struct sockaddr_in6: sin6_family 10 sin6_port 7639 sin6_flowinfo 0 sin6_addr 2620:0:a09:e000:21f:29ff:fe57:f88b sin6_scope_id 0 ((null)) The problem is that ipv6_recv_error() assumes that if the error wasn't generated by ICMPv6, it's an IPv4 address sitting there, and proceeds to create a v4-mapped address from it. Change ipv6_icmp_error() and ipv6_local_error() to set skb->protocol to htons(ETH_P_IPV6) so that ipv6_recv_error() knows the address sitting right after the extended error is IPv6, else it will incorrectly map the first octet into an IPv4-mapped IPv6 address in the cmsg structure returned in a recvmsg() call to obtain the error. Signed-off-by: Brian Haley <brian.haley@hp.com> -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-03 09:44:27 -06:00
skb->protocol = htons(ETH_P_IPV6);
[SK_BUFF] ipv6: More skb_reset_network_header conversions related to skb_pull Now related to this form: skb->nh.ipv6h = (struct ipv6hdr *)skb_put(skb, length); That, as the others, is done when skb->tail is still equal to skb->data, making the conversion to skb_reset_network_header possible. Also one more case equivalent to skb->nh.raw = skb->data, of this form: iph = (struct ipv6hdr *)skb->data; <SNIP> skb->nh.ipv6h = iph; Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-10 15:57:15 -07:00
skb_put(skb, sizeof(struct ipv6hdr));
skb_reset_network_header(skb);
[SK_BUFF]: Introduce ipv6_hdr(), remove skb->nh.ipv6h Now the skb->nh union has just one member, .raw, i.e. it is just like the skb->mac union, strange, no? I'm just leaving it like that till the transport layer is done with, when we'll rename skb->mac.raw to skb->mac_header (or ->mac_header_offset?), ditto for ->{h,nh}. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 18:54:47 -06:00
iph = ipv6_hdr(skb);
net: remove ipv6_addr_copy() C assignment can handle struct in6_addr copying. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-20 20:39:03 -07:00
iph->daddr = fl6->daddr;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
serr = SKB_EXT_ERR(skb);
serr->ee.ee_errno = err;
serr->ee.ee_origin = SO_EE_ORIGIN_LOCAL;
[NET] IPV6: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 07:24:49 -07:00
serr->ee.ee_type = 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
serr->ee.ee_code = 0;
serr->ee.ee_pad = 0;
serr->ee.ee_info = info;
serr->ee.ee_data = 0;
[SK_BUFF]: Introduce skb_network_header() For the places where we need a pointer to the network header, it is still legal to touch skb->nh.raw directly if just adding to, subtracting from or setting it to another layer header. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-10 21:50:43 -06:00
serr->addr_offset = (u8 *)&iph->daddr - skb_network_header(skb);
net: Put fl6_* macros to struct flowi6 and use them again. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-12 14:36:19 -07:00
serr->port = fl6->fl6_dport;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
[SK_BUFF]: Convert skb->tail to sk_buff_data_t So that it is also an offset from skb->head, reduces its size from 8 to 4 bytes on 64bit architectures, allowing us to combine the 4 bytes hole left by the layer headers conversion, reducing struct sk_buff size to 256 bytes, i.e. 4 64byte cachelines, and since the sk_buff slab cache is SLAB_HWCACHE_ALIGN... :-) Many calculations that previously required that skb->{transport,network, mac}_header be first converted to a pointer now can be done directly, being meaningful as offsets or pointers. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-19 21:29:13 -06:00
__skb_pull(skb, skb_tail_pointer(skb) - skb->data);
[SK_BUFF]: More skb_reset_transport_header conversions These are a bit more subtle, they are of this type: - skb->h.raw = payload; __skb_pull(skb, payload - skb->data); + skb_reset_transport_header(skb); __skb_pull results in: skb->data = skb->data + payload - skb->data; skb->data = payload; So after __skb_pull we have skb->data pointing to payload and we can just call skb_reset_transport_header(skb), that will do: skb->h.raw = payload; The others are similar, allowing us to get rid of some more cases where a pointer was being attributed to the layer headers. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-13 14:10:43 -06:00
skb_reset_transport_header(skb);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
if (sock_queue_err_skb(sk, skb))
kfree_skb(skb);
}
ipv6: Convert to use flowi6 where applicable. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-12 14:22:43 -07:00
void ipv6_local_rxpmtu(struct sock *sk, struct flowi6 *fl6, u32 mtu)
IPv6: Complete IPV6_DONTFRAG support Finally add support to detect a local IPV6_DONTFRAG event and return the relevant data to the user if they've enabled IPV6_RECVPATHMTU on the socket. The next recvmsg() will return no data, but have an IPV6_PATHMTU as ancillary data. Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-23 05:26:09 -06:00
{
struct ipv6_pinfo *np = inet6_sk(sk);
struct ipv6hdr *iph;
struct sk_buff *skb;
struct ip6_mtuinfo *mtu_info;
if (!np->rxopt.bits.rxpmtu)
return;
skb = alloc_skb(sizeof(struct ipv6hdr), GFP_ATOMIC);
if (!skb)
return;
skb_put(skb, sizeof(struct ipv6hdr));
skb_reset_network_header(skb);
iph = ipv6_hdr(skb);
net: remove ipv6_addr_copy() C assignment can handle struct in6_addr copying. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-20 20:39:03 -07:00
iph->daddr = fl6->daddr;
IPv6: Complete IPV6_DONTFRAG support Finally add support to detect a local IPV6_DONTFRAG event and return the relevant data to the user if they've enabled IPV6_RECVPATHMTU on the socket. The next recvmsg() will return no data, but have an IPV6_PATHMTU as ancillary data. Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-23 05:26:09 -06:00
mtu_info = IP6CBMTU(skb);
mtu_info->ip6m_mtu = mtu;
mtu_info->ip6m_addr.sin6_family = AF_INET6;
mtu_info->ip6m_addr.sin6_port = 0;
mtu_info->ip6m_addr.sin6_flowinfo = 0;
ipv6: Convert to use flowi6 where applicable. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-12 14:22:43 -07:00
mtu_info->ip6m_addr.sin6_scope_id = fl6->flowi6_oif;
net: remove ipv6_addr_copy() C assignment can handle struct in6_addr copying. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-20 20:39:03 -07:00
mtu_info->ip6m_addr.sin6_addr = ipv6_hdr(skb)->daddr;
IPv6: Complete IPV6_DONTFRAG support Finally add support to detect a local IPV6_DONTFRAG event and return the relevant data to the user if they've enabled IPV6_RECVPATHMTU on the socket. The next recvmsg() will return no data, but have an IPV6_PATHMTU as ancillary data. Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-23 05:26:09 -06:00
__skb_pull(skb, skb_tail_pointer(skb) - skb->data);
skb_reset_transport_header(skb);
skb = xchg(&np->rxpmtu, skb);
kfree_skb(skb);
}
ip: report the original address of ICMP messages ICMP messages can trigger ICMP and local errors. In this case serr->port is 0 and starting from Linux 4.0 we do not return the original target address to the error queue readers. Add function to define which errors provide addr_offset. With this fix my ping command is not silent anymore. Fixes: c247f0534cc5 ("ip: fix error queue empty skb handling") Signed-off-by: Julian Anastasov <ja@ssi.bg> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-22 23:34:39 -06:00
/* For some errors we have valid addr_offset even with zero payload and
* zero port. Also, addr_offset should be supported if port is set.
*/
static inline bool ipv6_datagram_support_addr(struct sock_exterr_skb *serr)
{
return serr->ee.ee_origin == SO_EE_ORIGIN_ICMP6 ||
serr->ee.ee_origin == SO_EE_ORIGIN_ICMP ||
serr->ee.ee_origin == SO_EE_ORIGIN_LOCAL || serr->port;
}
ip: fix error queue empty skb handling When reading from the error queue, msg_name and msg_control are only populated for some errors. A new exception for empty timestamp skbs added a false positive on icmp errors without payload. `traceroute -M udpconn` only displayed gateways that return payload with the icmp error: the embedded network headers are pulled before sock_queue_err_skb, leaving an skb with skb->len == 0 otherwise. Fix this regression by refining when msg_name and msg_control branches are taken. The solutions for the two fields are independent. msg_name only makes sense for errors that configure serr->port and serr->addr_offset. Test the first instead of skb->len. This also fixes another issue. saddr could hold the wrong data, as serr->addr_offset is not initialized in some code paths, pointing to the start of the network header. It is only valid when serr->port is set (non-zero). msg_control support differs between IPv4 and IPv6. IPv4 only honors requests for ICMP and timestamps with SOF_TIMESTAMPING_OPT_CMSG. The skb->len test can simply be removed, because skb->dev is also tested and never true for empty skbs. IPv6 honors requests for all errors aside from local errors and timestamps on empty skbs. In both cases, make the policy more explicit by moving this logic to a new function that decides whether to process msg_control and that optionally prepares the necessary fields in skb->cb[]. After this change, the IPv4 and IPv6 paths are more similar. The last case is rxrpc. Here, simply refine to only match timestamps. Fixes: 49ca0d8bfaf3 ("net-timestamp: no-payload option") Reported-by: Jan Niehusmann <jan@gondor.com> Signed-off-by: Willem de Bruijn <willemb@google.com> ---- Changes v1->v2 - fix local origin test inversion in ip6_datagram_support_cmsg - make v4 and v6 code paths more similar by introducing analogous ipv4_datagram_support_cmsg - fix compile bug in rxrpc Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-07 18:33:22 -07:00
/* IPv6 supports cmsg on all origins aside from SO_EE_ORIGIN_LOCAL.
*
* At one point, excluding local errors was a quick test to identify icmp/icmp6
* errors. This is no longer true, but the test remained, so the v6 stack,
* unlike v4, also honors cmsg requests on all wifi and timestamp errors.
*
* Timestamp code paths do not initialize the fields expected by cmsg:
* the PKTINFO fields in skb->cb[]. Fill those in here.
*/
static bool ip6_datagram_support_cmsg(struct sk_buff *skb,
struct sock_exterr_skb *serr)
net-timestamp: allow reading recv cmsg on errqueue with origin tstamp Allow reading of timestamps and cmsg at the same time on all relevant socket families. One use is to correlate timestamps with egress device, by asking for cmsg IP_PKTINFO. on AF_INET sockets, call the relevant function (ip_cmsg_recv). To avoid changing legacy expectations, only do so if the caller sets a new timestamping flag SOF_TIMESTAMPING_OPT_CMSG. on AF_INET6 sockets, IPV6_PKTINFO and all other recv cmsg are already returned for all origins. only change is to set ifindex, which is not initialized for all error origins. In both cases, only generate the pktinfo message if an ifindex is known. This is not the case for ACK timestamps. The difference between the protocol families is probably a historical accident as a result of the different conditions for generating cmsg in the relevant ip(v6)_recv_error function: ipv4: if (serr->ee.ee_origin == SO_EE_ORIGIN_ICMP) { ipv6: if (serr->ee.ee_origin != SO_EE_ORIGIN_LOCAL) { At one time, this was the same test bar for the ICMP/ICMP6 distinction. This is no longer true. Signed-off-by: Willem de Bruijn <willemb@google.com> ---- Changes v1 -> v2 large rewrite - integrate with existing pktinfo cmsg generation code - on ipv4: only send with new flag, to maintain legacy behavior - on ipv6: send at most a single pktinfo cmsg - on ipv6: initialize fields if not yet initialized The recv cmsg interfaces are also relevant to the discussion of whether looping packet headers is problematic. For v6, cmsgs that identify many headers are already returned. This patch expands that to v4. If it sounds reasonable, I will follow with patches 1. request timestamps without payload with SOF_TIMESTAMPING_OPT_TSONLY (http://patchwork.ozlabs.org/patch/366967/) 2. sysctl to conditionally drop all timestamps that have payload or cmsg from users without CAP_NET_RAW. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-30 20:22:34 -07:00
{
ip: fix error queue empty skb handling When reading from the error queue, msg_name and msg_control are only populated for some errors. A new exception for empty timestamp skbs added a false positive on icmp errors without payload. `traceroute -M udpconn` only displayed gateways that return payload with the icmp error: the embedded network headers are pulled before sock_queue_err_skb, leaving an skb with skb->len == 0 otherwise. Fix this regression by refining when msg_name and msg_control branches are taken. The solutions for the two fields are independent. msg_name only makes sense for errors that configure serr->port and serr->addr_offset. Test the first instead of skb->len. This also fixes another issue. saddr could hold the wrong data, as serr->addr_offset is not initialized in some code paths, pointing to the start of the network header. It is only valid when serr->port is set (non-zero). msg_control support differs between IPv4 and IPv6. IPv4 only honors requests for ICMP and timestamps with SOF_TIMESTAMPING_OPT_CMSG. The skb->len test can simply be removed, because skb->dev is also tested and never true for empty skbs. IPv6 honors requests for all errors aside from local errors and timestamps on empty skbs. In both cases, make the policy more explicit by moving this logic to a new function that decides whether to process msg_control and that optionally prepares the necessary fields in skb->cb[]. After this change, the IPv4 and IPv6 paths are more similar. The last case is rxrpc. Here, simply refine to only match timestamps. Fixes: 49ca0d8bfaf3 ("net-timestamp: no-payload option") Reported-by: Jan Niehusmann <jan@gondor.com> Signed-off-by: Willem de Bruijn <willemb@google.com> ---- Changes v1->v2 - fix local origin test inversion in ip6_datagram_support_cmsg - make v4 and v6 code paths more similar by introducing analogous ipv4_datagram_support_cmsg - fix compile bug in rxrpc Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-07 18:33:22 -07:00
if (serr->ee.ee_origin == SO_EE_ORIGIN_ICMP ||
serr->ee.ee_origin == SO_EE_ORIGIN_ICMP6)
return true;
if (serr->ee.ee_origin == SO_EE_ORIGIN_LOCAL)
return false;
if (!skb->dev)
return false;
net-timestamp: allow reading recv cmsg on errqueue with origin tstamp Allow reading of timestamps and cmsg at the same time on all relevant socket families. One use is to correlate timestamps with egress device, by asking for cmsg IP_PKTINFO. on AF_INET sockets, call the relevant function (ip_cmsg_recv). To avoid changing legacy expectations, only do so if the caller sets a new timestamping flag SOF_TIMESTAMPING_OPT_CMSG. on AF_INET6 sockets, IPV6_PKTINFO and all other recv cmsg are already returned for all origins. only change is to set ifindex, which is not initialized for all error origins. In both cases, only generate the pktinfo message if an ifindex is known. This is not the case for ACK timestamps. The difference between the protocol families is probably a historical accident as a result of the different conditions for generating cmsg in the relevant ip(v6)_recv_error function: ipv4: if (serr->ee.ee_origin == SO_EE_ORIGIN_ICMP) { ipv6: if (serr->ee.ee_origin != SO_EE_ORIGIN_LOCAL) { At one time, this was the same test bar for the ICMP/ICMP6 distinction. This is no longer true. Signed-off-by: Willem de Bruijn <willemb@google.com> ---- Changes v1 -> v2 large rewrite - integrate with existing pktinfo cmsg generation code - on ipv4: only send with new flag, to maintain legacy behavior - on ipv6: send at most a single pktinfo cmsg - on ipv6: initialize fields if not yet initialized The recv cmsg interfaces are also relevant to the discussion of whether looping packet headers is problematic. For v6, cmsgs that identify many headers are already returned. This patch expands that to v4. If it sounds reasonable, I will follow with patches 1. request timestamps without payload with SOF_TIMESTAMPING_OPT_TSONLY (http://patchwork.ozlabs.org/patch/366967/) 2. sysctl to conditionally drop all timestamps that have payload or cmsg from users without CAP_NET_RAW. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-30 20:22:34 -07:00
if (skb->protocol == htons(ETH_P_IPV6))
ip: fix error queue empty skb handling When reading from the error queue, msg_name and msg_control are only populated for some errors. A new exception for empty timestamp skbs added a false positive on icmp errors without payload. `traceroute -M udpconn` only displayed gateways that return payload with the icmp error: the embedded network headers are pulled before sock_queue_err_skb, leaving an skb with skb->len == 0 otherwise. Fix this regression by refining when msg_name and msg_control branches are taken. The solutions for the two fields are independent. msg_name only makes sense for errors that configure serr->port and serr->addr_offset. Test the first instead of skb->len. This also fixes another issue. saddr could hold the wrong data, as serr->addr_offset is not initialized in some code paths, pointing to the start of the network header. It is only valid when serr->port is set (non-zero). msg_control support differs between IPv4 and IPv6. IPv4 only honors requests for ICMP and timestamps with SOF_TIMESTAMPING_OPT_CMSG. The skb->len test can simply be removed, because skb->dev is also tested and never true for empty skbs. IPv6 honors requests for all errors aside from local errors and timestamps on empty skbs. In both cases, make the policy more explicit by moving this logic to a new function that decides whether to process msg_control and that optionally prepares the necessary fields in skb->cb[]. After this change, the IPv4 and IPv6 paths are more similar. The last case is rxrpc. Here, simply refine to only match timestamps. Fixes: 49ca0d8bfaf3 ("net-timestamp: no-payload option") Reported-by: Jan Niehusmann <jan@gondor.com> Signed-off-by: Willem de Bruijn <willemb@google.com> ---- Changes v1->v2 - fix local origin test inversion in ip6_datagram_support_cmsg - make v4 and v6 code paths more similar by introducing analogous ipv4_datagram_support_cmsg - fix compile bug in rxrpc Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-07 18:33:22 -07:00
IP6CB(skb)->iif = skb->dev->ifindex;
net-timestamp: allow reading recv cmsg on errqueue with origin tstamp Allow reading of timestamps and cmsg at the same time on all relevant socket families. One use is to correlate timestamps with egress device, by asking for cmsg IP_PKTINFO. on AF_INET sockets, call the relevant function (ip_cmsg_recv). To avoid changing legacy expectations, only do so if the caller sets a new timestamping flag SOF_TIMESTAMPING_OPT_CMSG. on AF_INET6 sockets, IPV6_PKTINFO and all other recv cmsg are already returned for all origins. only change is to set ifindex, which is not initialized for all error origins. In both cases, only generate the pktinfo message if an ifindex is known. This is not the case for ACK timestamps. The difference between the protocol families is probably a historical accident as a result of the different conditions for generating cmsg in the relevant ip(v6)_recv_error function: ipv4: if (serr->ee.ee_origin == SO_EE_ORIGIN_ICMP) { ipv6: if (serr->ee.ee_origin != SO_EE_ORIGIN_LOCAL) { At one time, this was the same test bar for the ICMP/ICMP6 distinction. This is no longer true. Signed-off-by: Willem de Bruijn <willemb@google.com> ---- Changes v1 -> v2 large rewrite - integrate with existing pktinfo cmsg generation code - on ipv4: only send with new flag, to maintain legacy behavior - on ipv6: send at most a single pktinfo cmsg - on ipv6: initialize fields if not yet initialized The recv cmsg interfaces are also relevant to the discussion of whether looping packet headers is problematic. For v6, cmsgs that identify many headers are already returned. This patch expands that to v4. If it sounds reasonable, I will follow with patches 1. request timestamps without payload with SOF_TIMESTAMPING_OPT_TSONLY (http://patchwork.ozlabs.org/patch/366967/) 2. sysctl to conditionally drop all timestamps that have payload or cmsg from users without CAP_NET_RAW. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-30 20:22:34 -07:00
else
ip: fix error queue empty skb handling When reading from the error queue, msg_name and msg_control are only populated for some errors. A new exception for empty timestamp skbs added a false positive on icmp errors without payload. `traceroute -M udpconn` only displayed gateways that return payload with the icmp error: the embedded network headers are pulled before sock_queue_err_skb, leaving an skb with skb->len == 0 otherwise. Fix this regression by refining when msg_name and msg_control branches are taken. The solutions for the two fields are independent. msg_name only makes sense for errors that configure serr->port and serr->addr_offset. Test the first instead of skb->len. This also fixes another issue. saddr could hold the wrong data, as serr->addr_offset is not initialized in some code paths, pointing to the start of the network header. It is only valid when serr->port is set (non-zero). msg_control support differs between IPv4 and IPv6. IPv4 only honors requests for ICMP and timestamps with SOF_TIMESTAMPING_OPT_CMSG. The skb->len test can simply be removed, because skb->dev is also tested and never true for empty skbs. IPv6 honors requests for all errors aside from local errors and timestamps on empty skbs. In both cases, make the policy more explicit by moving this logic to a new function that decides whether to process msg_control and that optionally prepares the necessary fields in skb->cb[]. After this change, the IPv4 and IPv6 paths are more similar. The last case is rxrpc. Here, simply refine to only match timestamps. Fixes: 49ca0d8bfaf3 ("net-timestamp: no-payload option") Reported-by: Jan Niehusmann <jan@gondor.com> Signed-off-by: Willem de Bruijn <willemb@google.com> ---- Changes v1->v2 - fix local origin test inversion in ip6_datagram_support_cmsg - make v4 and v6 code paths more similar by introducing analogous ipv4_datagram_support_cmsg - fix compile bug in rxrpc Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-07 18:33:22 -07:00
PKTINFO_SKB_CB(skb)->ipi_ifindex = skb->dev->ifindex;
return true;
net-timestamp: allow reading recv cmsg on errqueue with origin tstamp Allow reading of timestamps and cmsg at the same time on all relevant socket families. One use is to correlate timestamps with egress device, by asking for cmsg IP_PKTINFO. on AF_INET sockets, call the relevant function (ip_cmsg_recv). To avoid changing legacy expectations, only do so if the caller sets a new timestamping flag SOF_TIMESTAMPING_OPT_CMSG. on AF_INET6 sockets, IPV6_PKTINFO and all other recv cmsg are already returned for all origins. only change is to set ifindex, which is not initialized for all error origins. In both cases, only generate the pktinfo message if an ifindex is known. This is not the case for ACK timestamps. The difference between the protocol families is probably a historical accident as a result of the different conditions for generating cmsg in the relevant ip(v6)_recv_error function: ipv4: if (serr->ee.ee_origin == SO_EE_ORIGIN_ICMP) { ipv6: if (serr->ee.ee_origin != SO_EE_ORIGIN_LOCAL) { At one time, this was the same test bar for the ICMP/ICMP6 distinction. This is no longer true. Signed-off-by: Willem de Bruijn <willemb@google.com> ---- Changes v1 -> v2 large rewrite - integrate with existing pktinfo cmsg generation code - on ipv4: only send with new flag, to maintain legacy behavior - on ipv6: send at most a single pktinfo cmsg - on ipv6: initialize fields if not yet initialized The recv cmsg interfaces are also relevant to the discussion of whether looping packet headers is problematic. For v6, cmsgs that identify many headers are already returned. This patch expands that to v4. If it sounds reasonable, I will follow with patches 1. request timestamps without payload with SOF_TIMESTAMPING_OPT_TSONLY (http://patchwork.ozlabs.org/patch/366967/) 2. sysctl to conditionally drop all timestamps that have payload or cmsg from users without CAP_NET_RAW. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-30 20:22:34 -07:00
}
[NET] IPV6: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 07:24:49 -07:00
/*
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
* Handle MSG_ERRQUEUE
*/
inet: fix addr_len/msg->msg_namelen assignment in recv_error and rxpmtu functions Commit bceaa90240b6019ed73b49965eac7d167610be69 ("inet: prevent leakage of uninitialized memory to user in recv syscalls") conditionally updated addr_len if the msg_name is written to. The recv_error and rxpmtu functions relied on the recvmsg functions to set up addr_len before. As this does not happen any more we have to pass addr_len to those functions as well and set it to the size of the corresponding sockaddr length. This broke traceroute and such. Fixes: bceaa90240b6 ("inet: prevent leakage of uninitialized memory to user in recv syscalls") Reported-by: Brad Spengler <spender@grsecurity.net> Reported-by: Tom Labanowski Cc: mpb <mpb.mail@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-22 16:46:12 -07:00
int ipv6_recv_error(struct sock *sk, struct msghdr *msg, int len, int *addr_len)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
{
struct ipv6_pinfo *np = inet6_sk(sk);
struct sock_exterr_skb *serr;
sock: deduplicate errqueue dequeue sk->sk_error_queue is dequeued in four locations. All share the exact same logic. Deduplicate. Also collapse the two critical sections for dequeue (at the top of the recv handler) and signal (at the bottom). This moves signal generation for the next packet forward, which should be harmless. It also changes the behavior if the recv handler exits early with an error. Previously, a signal for follow-up packets on the errqueue would then not be scheduled. The new behavior, to always signal, is arguably a bug fix. For rxrpc, the change causes the same function to be called repeatedly for each queued packet (because the recv handler == sk_error_report). It is likely that all packets will fail for the same reason (e.g., memory exhaustion). This code runs without sk_lock held, so it is not safe to trust that sk->sk_err is immutable inbetween releasing q->lock and the subsequent test. Introduce int err just to avoid this potential race. Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-31 19:30:27 -06:00
struct sk_buff *skb;
net: add build-time checks for msg->msg_name size This is a follow-up patch to f3d3342602f8bc ("net: rework recvmsg handler msg_name and msg_namelen logic"). DECLARE_SOCKADDR validates that the structure we use for writing the name information to is not larger than the buffer which is reserved for msg->msg_name (which is 128 bytes). Also use DECLARE_SOCKADDR consistently in sendmsg code paths. Signed-off-by: Steffen Hurrle <steffen@hurrle.net> Suggested-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-17 14:53:15 -07:00
DECLARE_SOCKADDR(struct sockaddr_in6 *, sin, msg->msg_name);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
struct {
struct sock_extended_err ee;
struct sockaddr_in6 offender;
} errhdr;
int err;
int copied;
err = -EAGAIN;
sock: deduplicate errqueue dequeue sk->sk_error_queue is dequeued in four locations. All share the exact same logic. Deduplicate. Also collapse the two critical sections for dequeue (at the top of the recv handler) and signal (at the bottom). This moves signal generation for the next packet forward, which should be harmless. It also changes the behavior if the recv handler exits early with an error. Previously, a signal for follow-up packets on the errqueue would then not be scheduled. The new behavior, to always signal, is arguably a bug fix. For rxrpc, the change causes the same function to be called repeatedly for each queued packet (because the recv handler == sk_error_report). It is likely that all packets will fail for the same reason (e.g., memory exhaustion). This code runs without sk_lock held, so it is not safe to trust that sk->sk_err is immutable inbetween releasing q->lock and the subsequent test. Introduce int err just to avoid this potential race. Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-31 19:30:27 -06:00
skb = sock_dequeue_err_skb(sk);
ipv6: coding style: comparison for equality with NULL The ipv6 code uses a mixture of coding styles. In some instances check for NULL pointer is done as x == NULL and sometimes as !x. !x is preferred according to checkpatch and this patch makes the code consistent by adopting the latter form. No changes detected by objdiff. Signed-off-by: Ian Morris <ipm@chirality.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29 07:00:04 -06:00
if (!skb)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
goto out;
copied = skb->len;
if (copied > len) {
msg->msg_flags |= MSG_TRUNC;
copied = len;
}
net: Add and use skb_copy_datagram_msg() helper. This encapsulates all of the skb_copy_datagram_iovec() callers with call argument signature "skb, offset, msghdr->msg_iov, length". When we move to iov_iters in the networking, the iov_iter object will sit in the msghdr. Having a helper like this means there will be less places to touch during that transformation. Based upon descriptions and patch from Al Viro. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-05 14:46:40 -07:00
err = skb_copy_datagram_msg(skb, 0, msg, copied);
net: better drop monitoring in ip{6}_recv_error() We should call consume_skb(skb) when skb is properly consumed, or kfree_skb(skb) when skb must be dropped in error case. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21 23:27:32 -06:00
if (unlikely(err)) {
kfree_skb(skb);
return err;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
sock_recv_timestamp(msg, sk, skb);
serr = SKB_EXT_ERR(skb);
ip: report the original address of ICMP messages ICMP messages can trigger ICMP and local errors. In this case serr->port is 0 and starting from Linux 4.0 we do not return the original target address to the error queue readers. Add function to define which errors provide addr_offset. With this fix my ping command is not silent anymore. Fixes: c247f0534cc5 ("ip: fix error queue empty skb handling") Signed-off-by: Julian Anastasov <ja@ssi.bg> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-22 23:34:39 -06:00
if (sin && ipv6_datagram_support_addr(serr)) {
[SK_BUFF]: Introduce skb_network_header() For the places where we need a pointer to the network header, it is still legal to touch skb->nh.raw directly if just adding to, subtracting from or setting it to another layer header. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-10 21:50:43 -06:00
const unsigned char *nh = skb_network_header(skb);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
sin->sin6_family = AF_INET6;
sin->sin6_flowinfo = 0;
[NET] IPV6: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 07:24:49 -07:00
sin->sin6_port = serr->port;
IPv6: fix IPV6_RECVERR handling of locally-generated errors I noticed when I added support for IPV6_DONTFRAG that if you set IPV6_RECVERR and tried to send a UDP packet larger than 64K to an IPv6 destination, you'd correctly get an EMSGSIZE, but reading from MSG_ERRQUEUE returned the incorrect address in the cmsg: struct msghdr: msg_name 0x7fff8f3c96d0 msg_namelen 28 struct sockaddr_in6: sin6_family 10 sin6_port 7639 sin6_flowinfo 0 sin6_addr ::ffff:38.32.0.0 sin6_scope_id 0 ((null)) It should have returned this in my case: struct msghdr: msg_name 0x7fffd866b510 msg_namelen 28 struct sockaddr_in6: sin6_family 10 sin6_port 7639 sin6_flowinfo 0 sin6_addr 2620:0:a09:e000:21f:29ff:fe57:f88b sin6_scope_id 0 ((null)) The problem is that ipv6_recv_error() assumes that if the error wasn't generated by ICMPv6, it's an IPv4 address sitting there, and proceeds to create a v4-mapped address from it. Change ipv6_icmp_error() and ipv6_local_error() to set skb->protocol to htons(ETH_P_IPV6) so that ipv6_recv_error() knows the address sitting right after the extended error is IPv6, else it will incorrectly map the first octet into an IPv4-mapped IPv6 address in the cmsg structure returned in a recvmsg() call to obtain the error. Signed-off-by: Brian Haley <brian.haley@hp.com> -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-03 09:44:27 -06:00
if (skb->protocol == htons(ETH_P_IPV6)) {
ipv6: Use container_of macro instead of magic number to get ipv6 header. In ipv6_recv_error(), addr_offset points to daddr field of the ip header. To get ipv6 header, use container_of() macro instead of substracting magic number (24). Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-07 23:44:23 -07:00
const struct ipv6hdr *ip6h = container_of((struct in6_addr *)(nh + serr->addr_offset),
struct ipv6hdr, daddr);
sin->sin6_addr = ip6h->daddr;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
if (np->sndflow)
ipv6: Introduce ip6_flowinfo() to extract flowinfo (tclass + flowlabel). Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-12 22:01:51 -07:00
sin->sin6_flowinfo = ip6_flowinfo(ip6h);
ipv6: use newly introduced __ipv6_addr_needs_scope_id and ipv6_iface_scope_id This patch requires multicast interface-scoped addresses to supply a sin6_scope_id. Because the sin6_scope_id is now also correctly used in case of interface-scoped multicast traffic this enables one to use interface scoped addresses over interfaces which are not targeted by the default multicast route (the route has to be put there manually, though). getsockname() and getpeername() now return the correct sin6_scope_id in case of interface-local mc addresses. v2: a) rebased ontop of patch 1/4 (now uses ipv6_addr_props) v3: a) reverted changes for ipv6_addr_props v4: a) unchanged Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>dave Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-07 19:07:19 -07:00
sin->sin6_scope_id =
ipv6_iface_scope_id(&sin->sin6_addr,
IP6CB(skb)->iif);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
} else {
IPv6: use ipv6_addr_set_v4mapped() Might as well use the ipv6_addr_set_v4mapped() inline we created last year. Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07 14:58:25 -06:00
ipv6_addr_set_v4mapped(*(__be32 *)(nh + serr->addr_offset),
&sin->sin6_addr);
ipv6: use newly introduced __ipv6_addr_needs_scope_id and ipv6_iface_scope_id This patch requires multicast interface-scoped addresses to supply a sin6_scope_id. Because the sin6_scope_id is now also correctly used in case of interface-scoped multicast traffic this enables one to use interface scoped addresses over interfaces which are not targeted by the default multicast route (the route has to be put there manually, though). getsockname() and getpeername() now return the correct sin6_scope_id in case of interface-local mc addresses. v2: a) rebased ontop of patch 1/4 (now uses ipv6_addr_props) v3: a) reverted changes for ipv6_addr_props v4: a) unchanged Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>dave Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-07 19:07:19 -07:00
sin->sin6_scope_id = 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
}
inet: fix addr_len/msg->msg_namelen assignment in recv_error and rxpmtu functions Commit bceaa90240b6019ed73b49965eac7d167610be69 ("inet: prevent leakage of uninitialized memory to user in recv syscalls") conditionally updated addr_len if the msg_name is written to. The recv_error and rxpmtu functions relied on the recvmsg functions to set up addr_len before. As this does not happen any more we have to pass addr_len to those functions as well and set it to the size of the corresponding sockaddr length. This broke traceroute and such. Fixes: bceaa90240b6 ("inet: prevent leakage of uninitialized memory to user in recv syscalls") Reported-by: Brad Spengler <spender@grsecurity.net> Reported-by: Tom Labanowski Cc: mpb <mpb.mail@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-22 16:46:12 -07:00
*addr_len = sizeof(*sin);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
}
memcpy(&errhdr.ee, &serr->ee, sizeof(struct sock_extended_err));
sin = &errhdr.offender;
ip: zero sockaddr returned on error queue The sockaddr is returned in IP(V6)_RECVERR as part of errhdr. That structure is defined and allocated on the stack as struct { struct sock_extended_err ee; struct sockaddr_in(6) offender; } errhdr; The second part is only initialized for certain SO_EE_ORIGIN values. Always initialize it completely. An MTU exceeded error on a SOCK_RAW/IPPROTO_RAW is one example that would return uninitialized bytes. Signed-off-by: Willem de Bruijn <willemb@google.com> ---- Also verified that there is no padding between errhdr.ee and errhdr.offender that could leak additional kernel data. Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-15 11:18:40 -07:00
memset(sin, 0, sizeof(*sin));
ip: fix error queue empty skb handling When reading from the error queue, msg_name and msg_control are only populated for some errors. A new exception for empty timestamp skbs added a false positive on icmp errors without payload. `traceroute -M udpconn` only displayed gateways that return payload with the icmp error: the embedded network headers are pulled before sock_queue_err_skb, leaving an skb with skb->len == 0 otherwise. Fix this regression by refining when msg_name and msg_control branches are taken. The solutions for the two fields are independent. msg_name only makes sense for errors that configure serr->port and serr->addr_offset. Test the first instead of skb->len. This also fixes another issue. saddr could hold the wrong data, as serr->addr_offset is not initialized in some code paths, pointing to the start of the network header. It is only valid when serr->port is set (non-zero). msg_control support differs between IPv4 and IPv6. IPv4 only honors requests for ICMP and timestamps with SOF_TIMESTAMPING_OPT_CMSG. The skb->len test can simply be removed, because skb->dev is also tested and never true for empty skbs. IPv6 honors requests for all errors aside from local errors and timestamps on empty skbs. In both cases, make the policy more explicit by moving this logic to a new function that decides whether to process msg_control and that optionally prepares the necessary fields in skb->cb[]. After this change, the IPv4 and IPv6 paths are more similar. The last case is rxrpc. Here, simply refine to only match timestamps. Fixes: 49ca0d8bfaf3 ("net-timestamp: no-payload option") Reported-by: Jan Niehusmann <jan@gondor.com> Signed-off-by: Willem de Bruijn <willemb@google.com> ---- Changes v1->v2 - fix local origin test inversion in ip6_datagram_support_cmsg - make v4 and v6 code paths more similar by introducing analogous ipv4_datagram_support_cmsg - fix compile bug in rxrpc Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-07 18:33:22 -07:00
if (ip6_datagram_support_cmsg(skb, serr)) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
sin->sin6_family = AF_INET6;
ip: fix error queue empty skb handling When reading from the error queue, msg_name and msg_control are only populated for some errors. A new exception for empty timestamp skbs added a false positive on icmp errors without payload. `traceroute -M udpconn` only displayed gateways that return payload with the icmp error: the embedded network headers are pulled before sock_queue_err_skb, leaving an skb with skb->len == 0 otherwise. Fix this regression by refining when msg_name and msg_control branches are taken. The solutions for the two fields are independent. msg_name only makes sense for errors that configure serr->port and serr->addr_offset. Test the first instead of skb->len. This also fixes another issue. saddr could hold the wrong data, as serr->addr_offset is not initialized in some code paths, pointing to the start of the network header. It is only valid when serr->port is set (non-zero). msg_control support differs between IPv4 and IPv6. IPv4 only honors requests for ICMP and timestamps with SOF_TIMESTAMPING_OPT_CMSG. The skb->len test can simply be removed, because skb->dev is also tested and never true for empty skbs. IPv6 honors requests for all errors aside from local errors and timestamps on empty skbs. In both cases, make the policy more explicit by moving this logic to a new function that decides whether to process msg_control and that optionally prepares the necessary fields in skb->cb[]. After this change, the IPv4 and IPv6 paths are more similar. The last case is rxrpc. Here, simply refine to only match timestamps. Fixes: 49ca0d8bfaf3 ("net-timestamp: no-payload option") Reported-by: Jan Niehusmann <jan@gondor.com> Signed-off-by: Willem de Bruijn <willemb@google.com> ---- Changes v1->v2 - fix local origin test inversion in ip6_datagram_support_cmsg - make v4 and v6 code paths more similar by introducing analogous ipv4_datagram_support_cmsg - fix compile bug in rxrpc Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-07 18:33:22 -07:00
if (np->rxopt.all)
ipv6: make IPV6_RECVPKTINFO work for ipv4 datagrams We currently don't report IPV6_RECVPKTINFO in cmsg access ancillary data for IPv4 datagrams on IPv6 sockets. This patch splits the ip6_datagram_recv_ctl into two functions, one which handles both protocol families, AF_INET and AF_INET6, while the ip6_datagram_recv_specific_ctl only handles IPv6 cmsg data. ip6_datagram_recv_*_ctl never reported back any errors, so we can make them return void. Also provide a helper for protocols which don't offer dual personality to further use ip6_datagram_recv_ctl, which is exported to modules. I needed to shuffle the code for ping around a bit to make it easier to implement dual personality for ping ipv6 sockets in future. Reported-by: Gert Doering <gert@space.net> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-19 19:43:08 -07:00
ip6_datagram_recv_common_ctl(sk, msg, skb);
IPv6: fix IPV6_RECVERR handling of locally-generated errors I noticed when I added support for IPV6_DONTFRAG that if you set IPV6_RECVERR and tried to send a UDP packet larger than 64K to an IPv6 destination, you'd correctly get an EMSGSIZE, but reading from MSG_ERRQUEUE returned the incorrect address in the cmsg: struct msghdr: msg_name 0x7fff8f3c96d0 msg_namelen 28 struct sockaddr_in6: sin6_family 10 sin6_port 7639 sin6_flowinfo 0 sin6_addr ::ffff:38.32.0.0 sin6_scope_id 0 ((null)) It should have returned this in my case: struct msghdr: msg_name 0x7fffd866b510 msg_namelen 28 struct sockaddr_in6: sin6_family 10 sin6_port 7639 sin6_flowinfo 0 sin6_addr 2620:0:a09:e000:21f:29ff:fe57:f88b sin6_scope_id 0 ((null)) The problem is that ipv6_recv_error() assumes that if the error wasn't generated by ICMPv6, it's an IPv4 address sitting there, and proceeds to create a v4-mapped address from it. Change ipv6_icmp_error() and ipv6_local_error() to set skb->protocol to htons(ETH_P_IPV6) so that ipv6_recv_error() knows the address sitting right after the extended error is IPv6, else it will incorrectly map the first octet into an IPv4-mapped IPv6 address in the cmsg structure returned in a recvmsg() call to obtain the error. Signed-off-by: Brian Haley <brian.haley@hp.com> -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-03 09:44:27 -06:00
if (skb->protocol == htons(ETH_P_IPV6)) {
net: remove ipv6_addr_copy() C assignment can handle struct in6_addr copying. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-20 20:39:03 -07:00
sin->sin6_addr = ipv6_hdr(skb)->saddr;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
if (np->rxopt.all)
ipv6: make IPV6_RECVPKTINFO work for ipv4 datagrams We currently don't report IPV6_RECVPKTINFO in cmsg access ancillary data for IPv4 datagrams on IPv6 sockets. This patch splits the ip6_datagram_recv_ctl into two functions, one which handles both protocol families, AF_INET and AF_INET6, while the ip6_datagram_recv_specific_ctl only handles IPv6 cmsg data. ip6_datagram_recv_*_ctl never reported back any errors, so we can make them return void. Also provide a helper for protocols which don't offer dual personality to further use ip6_datagram_recv_ctl, which is exported to modules. I needed to shuffle the code for ping around a bit to make it easier to implement dual personality for ping ipv6 sockets in future. Reported-by: Gert Doering <gert@space.net> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-19 19:43:08 -07:00
ip6_datagram_recv_specific_ctl(sk, msg, skb);
ipv6: use newly introduced __ipv6_addr_needs_scope_id and ipv6_iface_scope_id This patch requires multicast interface-scoped addresses to supply a sin6_scope_id. Because the sin6_scope_id is now also correctly used in case of interface-scoped multicast traffic this enables one to use interface scoped addresses over interfaces which are not targeted by the default multicast route (the route has to be put there manually, though). getsockname() and getpeername() now return the correct sin6_scope_id in case of interface-local mc addresses. v2: a) rebased ontop of patch 1/4 (now uses ipv6_addr_props) v3: a) reverted changes for ipv6_addr_props v4: a) unchanged Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>dave Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-07 19:07:19 -07:00
sin->sin6_scope_id =
ipv6_iface_scope_id(&sin->sin6_addr,
IP6CB(skb)->iif);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
} else {
IPv6: use ipv6_addr_set_v4mapped() Might as well use the ipv6_addr_set_v4mapped() inline we created last year. Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-07 14:58:25 -06:00
ipv6_addr_set_v4mapped(ip_hdr(skb)->saddr,
&sin->sin6_addr);
ip: zero sockaddr returned on error queue The sockaddr is returned in IP(V6)_RECVERR as part of errhdr. That structure is defined and allocated on the stack as struct { struct sock_extended_err ee; struct sockaddr_in(6) offender; } errhdr; The second part is only initialized for certain SO_EE_ORIGIN values. Always initialize it completely. An MTU exceeded error on a SOCK_RAW/IPPROTO_RAW is one example that would return uninitialized bytes. Signed-off-by: Willem de Bruijn <willemb@google.com> ---- Also verified that there is no padding between errhdr.ee and errhdr.offender that could leak additional kernel data. Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-15 11:18:40 -07:00
if (inet_sk(sk)->cmsg_flags)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
ip_cmsg_recv(msg, skb);
}
}
put_cmsg(msg, SOL_IPV6, IPV6_RECVERR, sizeof(errhdr), &errhdr);
/* Now we could try to dump offended packet options */
msg->msg_flags |= MSG_ERRQUEUE;
err = copied;
net: better drop monitoring in ip{6}_recv_error() We should call consume_skb(skb) when skb is properly consumed, or kfree_skb(skb) when skb must be dropped in error case. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-21 23:27:32 -06:00
consume_skb(skb);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
out:
return err;
}
ipv6: Export ipv6 functions for use by other protocols For implementing other protocols on top of IPv6, such as L2TPv3's IP encapsulation over ipv6, we'd like to call some IPv6 functions which are not currently exported. This patch exports them. Signed-off-by: Chris Elston <celston@katalix.com> Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-29 15:48:53 -06:00
EXPORT_SYMBOL_GPL(ipv6_recv_error);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
IPv6: Complete IPV6_DONTFRAG support Finally add support to detect a local IPV6_DONTFRAG event and return the relevant data to the user if they've enabled IPV6_RECVPATHMTU on the socket. The next recvmsg() will return no data, but have an IPV6_PATHMTU as ancillary data. Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-23 05:26:09 -06:00
/*
* Handle IPV6_RECVPATHMTU
*/
inet: fix addr_len/msg->msg_namelen assignment in recv_error and rxpmtu functions Commit bceaa90240b6019ed73b49965eac7d167610be69 ("inet: prevent leakage of uninitialized memory to user in recv syscalls") conditionally updated addr_len if the msg_name is written to. The recv_error and rxpmtu functions relied on the recvmsg functions to set up addr_len before. As this does not happen any more we have to pass addr_len to those functions as well and set it to the size of the corresponding sockaddr length. This broke traceroute and such. Fixes: bceaa90240b6 ("inet: prevent leakage of uninitialized memory to user in recv syscalls") Reported-by: Brad Spengler <spender@grsecurity.net> Reported-by: Tom Labanowski Cc: mpb <mpb.mail@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-22 16:46:12 -07:00
int ipv6_recv_rxpmtu(struct sock *sk, struct msghdr *msg, int len,
int *addr_len)
IPv6: Complete IPV6_DONTFRAG support Finally add support to detect a local IPV6_DONTFRAG event and return the relevant data to the user if they've enabled IPV6_RECVPATHMTU on the socket. The next recvmsg() will return no data, but have an IPV6_PATHMTU as ancillary data. Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-23 05:26:09 -06:00
{
struct ipv6_pinfo *np = inet6_sk(sk);
struct sk_buff *skb;
struct ip6_mtuinfo mtu_info;
net: add build-time checks for msg->msg_name size This is a follow-up patch to f3d3342602f8bc ("net: rework recvmsg handler msg_name and msg_namelen logic"). DECLARE_SOCKADDR validates that the structure we use for writing the name information to is not larger than the buffer which is reserved for msg->msg_name (which is 128 bytes). Also use DECLARE_SOCKADDR consistently in sendmsg code paths. Signed-off-by: Steffen Hurrle <steffen@hurrle.net> Suggested-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-17 14:53:15 -07:00
DECLARE_SOCKADDR(struct sockaddr_in6 *, sin, msg->msg_name);
IPv6: Complete IPV6_DONTFRAG support Finally add support to detect a local IPV6_DONTFRAG event and return the relevant data to the user if they've enabled IPV6_RECVPATHMTU on the socket. The next recvmsg() will return no data, but have an IPV6_PATHMTU as ancillary data. Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-23 05:26:09 -06:00
int err;
int copied;
err = -EAGAIN;
skb = xchg(&np->rxpmtu, NULL);
ipv6: coding style: comparison for equality with NULL The ipv6 code uses a mixture of coding styles. In some instances check for NULL pointer is done as x == NULL and sometimes as !x. !x is preferred according to checkpatch and this patch makes the code consistent by adopting the latter form. No changes detected by objdiff. Signed-off-by: Ian Morris <ipm@chirality.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29 07:00:04 -06:00
if (!skb)
IPv6: Complete IPV6_DONTFRAG support Finally add support to detect a local IPV6_DONTFRAG event and return the relevant data to the user if they've enabled IPV6_RECVPATHMTU on the socket. The next recvmsg() will return no data, but have an IPV6_PATHMTU as ancillary data. Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-23 05:26:09 -06:00
goto out;
copied = skb->len;
if (copied > len) {
msg->msg_flags |= MSG_TRUNC;
copied = len;
}
net: Add and use skb_copy_datagram_msg() helper. This encapsulates all of the skb_copy_datagram_iovec() callers with call argument signature "skb, offset, msghdr->msg_iov, length". When we move to iov_iters in the networking, the iov_iter object will sit in the msghdr. Having a helper like this means there will be less places to touch during that transformation. Based upon descriptions and patch from Al Viro. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-05 14:46:40 -07:00
err = skb_copy_datagram_msg(skb, 0, msg, copied);
IPv6: Complete IPV6_DONTFRAG support Finally add support to detect a local IPV6_DONTFRAG event and return the relevant data to the user if they've enabled IPV6_RECVPATHMTU on the socket. The next recvmsg() will return no data, but have an IPV6_PATHMTU as ancillary data. Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-23 05:26:09 -06:00
if (err)
goto out_free_skb;
sock_recv_timestamp(msg, sk, skb);
memcpy(&mtu_info, IP6CBMTU(skb), sizeof(mtu_info));
if (sin) {
sin->sin6_family = AF_INET6;
sin->sin6_flowinfo = 0;
sin->sin6_port = 0;
sin->sin6_scope_id = mtu_info.ip6m_addr.sin6_scope_id;
net: remove ipv6_addr_copy() C assignment can handle struct in6_addr copying. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-20 20:39:03 -07:00
sin->sin6_addr = mtu_info.ip6m_addr.sin6_addr;
inet: fix addr_len/msg->msg_namelen assignment in recv_error and rxpmtu functions Commit bceaa90240b6019ed73b49965eac7d167610be69 ("inet: prevent leakage of uninitialized memory to user in recv syscalls") conditionally updated addr_len if the msg_name is written to. The recv_error and rxpmtu functions relied on the recvmsg functions to set up addr_len before. As this does not happen any more we have to pass addr_len to those functions as well and set it to the size of the corresponding sockaddr length. This broke traceroute and such. Fixes: bceaa90240b6 ("inet: prevent leakage of uninitialized memory to user in recv syscalls") Reported-by: Brad Spengler <spender@grsecurity.net> Reported-by: Tom Labanowski Cc: mpb <mpb.mail@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-22 16:46:12 -07:00
*addr_len = sizeof(*sin);
IPv6: Complete IPV6_DONTFRAG support Finally add support to detect a local IPV6_DONTFRAG event and return the relevant data to the user if they've enabled IPV6_RECVPATHMTU on the socket. The next recvmsg() will return no data, but have an IPV6_PATHMTU as ancillary data. Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-23 05:26:09 -06:00
}
put_cmsg(msg, SOL_IPV6, IPV6_PATHMTU, sizeof(mtu_info), &mtu_info);
err = copied;
out_free_skb:
kfree_skb(skb);
out:
return err;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
ipv6: make IPV6_RECVPKTINFO work for ipv4 datagrams We currently don't report IPV6_RECVPKTINFO in cmsg access ancillary data for IPv4 datagrams on IPv6 sockets. This patch splits the ip6_datagram_recv_ctl into two functions, one which handles both protocol families, AF_INET and AF_INET6, while the ip6_datagram_recv_specific_ctl only handles IPv6 cmsg data. ip6_datagram_recv_*_ctl never reported back any errors, so we can make them return void. Also provide a helper for protocols which don't offer dual personality to further use ip6_datagram_recv_ctl, which is exported to modules. I needed to shuffle the code for ping around a bit to make it easier to implement dual personality for ping ipv6 sockets in future. Reported-by: Gert Doering <gert@space.net> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-19 19:43:08 -07:00
void ip6_datagram_recv_common_ctl(struct sock *sk, struct msghdr *msg,
struct sk_buff *skb)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
{
struct ipv6_pinfo *np = inet6_sk(sk);
ipv6: make IPV6_RECVPKTINFO work for ipv4 datagrams We currently don't report IPV6_RECVPKTINFO in cmsg access ancillary data for IPv4 datagrams on IPv6 sockets. This patch splits the ip6_datagram_recv_ctl into two functions, one which handles both protocol families, AF_INET and AF_INET6, while the ip6_datagram_recv_specific_ctl only handles IPv6 cmsg data. ip6_datagram_recv_*_ctl never reported back any errors, so we can make them return void. Also provide a helper for protocols which don't offer dual personality to further use ip6_datagram_recv_ctl, which is exported to modules. I needed to shuffle the code for ping around a bit to make it easier to implement dual personality for ping ipv6 sockets in future. Reported-by: Gert Doering <gert@space.net> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-19 19:43:08 -07:00
bool is_ipv6 = skb->protocol == htons(ETH_P_IPV6);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
if (np->rxopt.bits.rxinfo) {
struct in6_pktinfo src_info;
ipv6: make IPV6_RECVPKTINFO work for ipv4 datagrams We currently don't report IPV6_RECVPKTINFO in cmsg access ancillary data for IPv4 datagrams on IPv6 sockets. This patch splits the ip6_datagram_recv_ctl into two functions, one which handles both protocol families, AF_INET and AF_INET6, while the ip6_datagram_recv_specific_ctl only handles IPv6 cmsg data. ip6_datagram_recv_*_ctl never reported back any errors, so we can make them return void. Also provide a helper for protocols which don't offer dual personality to further use ip6_datagram_recv_ctl, which is exported to modules. I needed to shuffle the code for ping around a bit to make it easier to implement dual personality for ping ipv6 sockets in future. Reported-by: Gert Doering <gert@space.net> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-19 19:43:08 -07:00
if (is_ipv6) {
src_info.ipi6_ifindex = IP6CB(skb)->iif;
src_info.ipi6_addr = ipv6_hdr(skb)->daddr;
} else {
src_info.ipi6_ifindex =
PKTINFO_SKB_CB(skb)->ipi_ifindex;
ipv6_addr_set_v4mapped(ip_hdr(skb)->daddr,
&src_info.ipi6_addr);
}
net-timestamp: allow reading recv cmsg on errqueue with origin tstamp Allow reading of timestamps and cmsg at the same time on all relevant socket families. One use is to correlate timestamps with egress device, by asking for cmsg IP_PKTINFO. on AF_INET sockets, call the relevant function (ip_cmsg_recv). To avoid changing legacy expectations, only do so if the caller sets a new timestamping flag SOF_TIMESTAMPING_OPT_CMSG. on AF_INET6 sockets, IPV6_PKTINFO and all other recv cmsg are already returned for all origins. only change is to set ifindex, which is not initialized for all error origins. In both cases, only generate the pktinfo message if an ifindex is known. This is not the case for ACK timestamps. The difference between the protocol families is probably a historical accident as a result of the different conditions for generating cmsg in the relevant ip(v6)_recv_error function: ipv4: if (serr->ee.ee_origin == SO_EE_ORIGIN_ICMP) { ipv6: if (serr->ee.ee_origin != SO_EE_ORIGIN_LOCAL) { At one time, this was the same test bar for the ICMP/ICMP6 distinction. This is no longer true. Signed-off-by: Willem de Bruijn <willemb@google.com> ---- Changes v1 -> v2 large rewrite - integrate with existing pktinfo cmsg generation code - on ipv4: only send with new flag, to maintain legacy behavior - on ipv6: send at most a single pktinfo cmsg - on ipv6: initialize fields if not yet initialized The recv cmsg interfaces are also relevant to the discussion of whether looping packet headers is problematic. For v6, cmsgs that identify many headers are already returned. This patch expands that to v4. If it sounds reasonable, I will follow with patches 1. request timestamps without payload with SOF_TIMESTAMPING_OPT_TSONLY (http://patchwork.ozlabs.org/patch/366967/) 2. sysctl to conditionally drop all timestamps that have payload or cmsg from users without CAP_NET_RAW. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-30 20:22:34 -07:00
if (src_info.ipi6_ifindex >= 0)
put_cmsg(msg, SOL_IPV6, IPV6_PKTINFO,
sizeof(src_info), &src_info);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
}
ipv6: make IPV6_RECVPKTINFO work for ipv4 datagrams We currently don't report IPV6_RECVPKTINFO in cmsg access ancillary data for IPv4 datagrams on IPv6 sockets. This patch splits the ip6_datagram_recv_ctl into two functions, one which handles both protocol families, AF_INET and AF_INET6, while the ip6_datagram_recv_specific_ctl only handles IPv6 cmsg data. ip6_datagram_recv_*_ctl never reported back any errors, so we can make them return void. Also provide a helper for protocols which don't offer dual personality to further use ip6_datagram_recv_ctl, which is exported to modules. I needed to shuffle the code for ping around a bit to make it easier to implement dual personality for ping ipv6 sockets in future. Reported-by: Gert Doering <gert@space.net> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-19 19:43:08 -07:00
}
void ip6_datagram_recv_specific_ctl(struct sock *sk, struct msghdr *msg,
struct sk_buff *skb)
{
struct ipv6_pinfo *np = inet6_sk(sk);
struct inet6_skb_parm *opt = IP6CB(skb);
unsigned char *nh = skb_network_header(skb);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
if (np->rxopt.bits.rxhlim) {
[SK_BUFF]: Introduce ipv6_hdr(), remove skb->nh.ipv6h Now the skb->nh union has just one member, .raw, i.e. it is just like the skb->mac union, strange, no? I'm just leaving it like that till the transport layer is done with, when we'll rename skb->mac.raw to skb->mac_header (or ->mac_header_offset?), ditto for ->{h,nh}. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 18:54:47 -06:00
int hlim = ipv6_hdr(skb)->hop_limit;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
put_cmsg(msg, SOL_IPV6, IPV6_HOPLIMIT, sizeof(hlim), &hlim);
}
[IPV6]: Support IPV6_{RECV,}TCLASS socket options / ancillary data. Based on patch from David L Stevens <dlstevens@us.ibm.com> Signed-off-by: David L Stevens <dlstevens@us.ibm.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-09-07 19:19:03 -06:00
if (np->rxopt.bits.rxtclass) {
ipv6: Use ipv6_get_dsfield() instead of ipv6_tclass(). Commit 7a3198a8 ("ipv6: helper function to get tclass") introduced ipv6_tclass(), but similar function is already available as ipv6_get_dsfield(). We might be able to call ipv6_tclass() from ipv6_get_dsfield(), but it is confusing to have two versions. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-12 22:02:01 -07:00
int tclass = ipv6_get_dsfield(ipv6_hdr(skb));
[IPV6]: Support IPV6_{RECV,}TCLASS socket options / ancillary data. Based on patch from David L Stevens <dlstevens@us.ibm.com> Signed-off-by: David L Stevens <dlstevens@us.ibm.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-09-07 19:19:03 -06:00
put_cmsg(msg, SOL_IPV6, IPV6_TCLASS, sizeof(tclass), &tclass);
}
ipv6: Introduce ip6_flowinfo() to extract flowinfo (tclass + flowlabel). Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-12 22:01:51 -07:00
if (np->rxopt.bits.rxflow) {
__be32 flowinfo = ip6_flowinfo((struct ipv6hdr *)nh);
if (flowinfo)
put_cmsg(msg, SOL_IPV6, IPV6_FLOWINFO, sizeof(flowinfo), &flowinfo);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
}
[IPV6]: Support several new sockopt / ancillary data in Advanced API (RFC3542). Support several new socket options / ancillary data: IPV6_RECVPKTINFO, IPV6_PKTINFO, IPV6_RECVHOPOPTS, IPV6_HOPOPTS, IPV6_RECVDSTOPTS, IPV6_DSTOPTS, IPV6_RTHDRDSTOPTS, IPV6_RECVRTHDR, IPV6_RTHDR, IPV6_RECVHOPOPTS, IPV6_HOPOPTS Old semantics are preserved as IPV6_2292xxxx so that we can maintain backward compatibility. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-09-07 18:59:17 -06:00
/* HbH is allowed only once */
ipv6: use flag instead of u16 for hop in inet6_skb_parm Hop was always either 0 or sizeof(struct ipv6hdr). Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-08 15:32:12 -06:00
if (np->rxopt.bits.hopopts && (opt->flags & IP6SKB_HOPBYHOP)) {
u8 *ptr = nh + sizeof(struct ipv6hdr);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
put_cmsg(msg, SOL_IPV6, IPV6_HOPOPTS, (ptr[1]+1)<<3, ptr);
}
[IPV6]: Support several new sockopt / ancillary data in Advanced API (RFC3542). Support several new socket options / ancillary data: IPV6_RECVPKTINFO, IPV6_PKTINFO, IPV6_RECVHOPOPTS, IPV6_HOPOPTS, IPV6_RECVDSTOPTS, IPV6_DSTOPTS, IPV6_RTHDRDSTOPTS, IPV6_RECVRTHDR, IPV6_RTHDR, IPV6_RECVHOPOPTS, IPV6_HOPOPTS Old semantics are preserved as IPV6_2292xxxx so that we can maintain backward compatibility. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-09-07 18:59:17 -06:00
if (opt->lastopt &&
(np->rxopt.bits.dstopts || np->rxopt.bits.srcrt)) {
/*
* Silly enough, but we need to reparse in order to
* report extension headers (except for HbH)
* in order.
*
[NET] IPV6: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 07:24:49 -07:00
* Also note that IPV6_RECVRTHDRDSTOPTS is NOT
[IPV6]: Support several new sockopt / ancillary data in Advanced API (RFC3542). Support several new socket options / ancillary data: IPV6_RECVPKTINFO, IPV6_PKTINFO, IPV6_RECVHOPOPTS, IPV6_HOPOPTS, IPV6_RECVDSTOPTS, IPV6_DSTOPTS, IPV6_RTHDRDSTOPTS, IPV6_RECVRTHDR, IPV6_RTHDR, IPV6_RECVHOPOPTS, IPV6_HOPOPTS Old semantics are preserved as IPV6_2292xxxx so that we can maintain backward compatibility. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-09-07 18:59:17 -06:00
* (and WILL NOT be) defined because
* IPV6_RECVDSTOPTS is more generic. --yoshfuji
*/
unsigned int off = sizeof(struct ipv6hdr);
[SK_BUFF]: Introduce ipv6_hdr(), remove skb->nh.ipv6h Now the skb->nh union has just one member, .raw, i.e. it is just like the skb->mac union, strange, no? I'm just leaving it like that till the transport layer is done with, when we'll rename skb->mac.raw to skb->mac_header (or ->mac_header_offset?), ditto for ->{h,nh}. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 18:54:47 -06:00
u8 nexthdr = ipv6_hdr(skb)->nexthdr;
[IPV6]: Support several new sockopt / ancillary data in Advanced API (RFC3542). Support several new socket options / ancillary data: IPV6_RECVPKTINFO, IPV6_PKTINFO, IPV6_RECVHOPOPTS, IPV6_HOPOPTS, IPV6_RECVDSTOPTS, IPV6_DSTOPTS, IPV6_RTHDRDSTOPTS, IPV6_RECVRTHDR, IPV6_RTHDR, IPV6_RECVHOPOPTS, IPV6_HOPOPTS Old semantics are preserved as IPV6_2292xxxx so that we can maintain backward compatibility. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-09-07 18:59:17 -06:00
while (off <= opt->lastopt) {
net: cleanup unsigned to unsigned int Use of "unsigned int" is preferred to bare "unsigned" in net tree. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-14 23:58:06 -06:00
unsigned int len;
[SK_BUFF]: Introduce skb_network_header() For the places where we need a pointer to the network header, it is still legal to touch skb->nh.raw directly if just adding to, subtracting from or setting it to another layer header. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-10 21:50:43 -06:00
u8 *ptr = nh + off;
[IPV6]: Support several new sockopt / ancillary data in Advanced API (RFC3542). Support several new socket options / ancillary data: IPV6_RECVPKTINFO, IPV6_PKTINFO, IPV6_RECVHOPOPTS, IPV6_HOPOPTS, IPV6_RECVDSTOPTS, IPV6_DSTOPTS, IPV6_RTHDRDSTOPTS, IPV6_RECVRTHDR, IPV6_RTHDR, IPV6_RECVHOPOPTS, IPV6_HOPOPTS Old semantics are preserved as IPV6_2292xxxx so that we can maintain backward compatibility. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-09-07 18:59:17 -06:00
net/ipv6/datagram.c: Checkpatch cleanups datagram.c:101: ERROR: "(foo*)" should be "(foo *)" datagram.c:521: ERROR: space required before the open parenthesis '(' datagram.c:830: WARNING: braces {} are not necessary for single statement blocks datagram.c:849: WARNING: braces {} are not necessary for single statement blocks Signed-off-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-01 01:49:03 -06:00
switch (nexthdr) {
[IPV6]: Support several new sockopt / ancillary data in Advanced API (RFC3542). Support several new socket options / ancillary data: IPV6_RECVPKTINFO, IPV6_PKTINFO, IPV6_RECVHOPOPTS, IPV6_HOPOPTS, IPV6_RECVDSTOPTS, IPV6_DSTOPTS, IPV6_RTHDRDSTOPTS, IPV6_RECVRTHDR, IPV6_RTHDR, IPV6_RECVHOPOPTS, IPV6_HOPOPTS Old semantics are preserved as IPV6_2292xxxx so that we can maintain backward compatibility. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-09-07 18:59:17 -06:00
case IPPROTO_DSTOPTS:
nexthdr = ptr[0];
len = (ptr[1] + 1) << 3;
if (np->rxopt.bits.dstopts)
put_cmsg(msg, SOL_IPV6, IPV6_DSTOPTS, len, ptr);
break;
case IPPROTO_ROUTING:
nexthdr = ptr[0];
len = (ptr[1] + 1) << 3;
if (np->rxopt.bits.srcrt)
put_cmsg(msg, SOL_IPV6, IPV6_RTHDR, len, ptr);
break;
case IPPROTO_AH:
nexthdr = ptr[0];
[IPV6]: Fix calculation of AH length during filling ancillary data. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-11-19 20:21:59 -07:00
len = (ptr[1] + 2) << 2;
[IPV6]: Support several new sockopt / ancillary data in Advanced API (RFC3542). Support several new socket options / ancillary data: IPV6_RECVPKTINFO, IPV6_PKTINFO, IPV6_RECVHOPOPTS, IPV6_HOPOPTS, IPV6_RECVDSTOPTS, IPV6_DSTOPTS, IPV6_RTHDRDSTOPTS, IPV6_RECVRTHDR, IPV6_RTHDR, IPV6_RECVHOPOPTS, IPV6_HOPOPTS Old semantics are preserved as IPV6_2292xxxx so that we can maintain backward compatibility. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-09-07 18:59:17 -06:00
break;
default:
nexthdr = ptr[0];
len = (ptr[1] + 1) << 3;
break;
}
off += len;
}
}
/* socket options in old style */
if (np->rxopt.bits.rxoinfo) {
struct in6_pktinfo src_info;
src_info.ipi6_ifindex = opt->iif;
net: remove ipv6_addr_copy() C assignment can handle struct in6_addr copying. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-20 20:39:03 -07:00
src_info.ipi6_addr = ipv6_hdr(skb)->daddr;
[IPV6]: Support several new sockopt / ancillary data in Advanced API (RFC3542). Support several new socket options / ancillary data: IPV6_RECVPKTINFO, IPV6_PKTINFO, IPV6_RECVHOPOPTS, IPV6_HOPOPTS, IPV6_RECVDSTOPTS, IPV6_DSTOPTS, IPV6_RTHDRDSTOPTS, IPV6_RECVRTHDR, IPV6_RTHDR, IPV6_RECVHOPOPTS, IPV6_HOPOPTS Old semantics are preserved as IPV6_2292xxxx so that we can maintain backward compatibility. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-09-07 18:59:17 -06:00
put_cmsg(msg, SOL_IPV6, IPV6_2292PKTINFO, sizeof(src_info), &src_info);
}
if (np->rxopt.bits.rxohlim) {
[SK_BUFF]: Introduce ipv6_hdr(), remove skb->nh.ipv6h Now the skb->nh union has just one member, .raw, i.e. it is just like the skb->mac union, strange, no? I'm just leaving it like that till the transport layer is done with, when we'll rename skb->mac.raw to skb->mac_header (or ->mac_header_offset?), ditto for ->{h,nh}. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-25 18:54:47 -06:00
int hlim = ipv6_hdr(skb)->hop_limit;
[IPV6]: Support several new sockopt / ancillary data in Advanced API (RFC3542). Support several new socket options / ancillary data: IPV6_RECVPKTINFO, IPV6_PKTINFO, IPV6_RECVHOPOPTS, IPV6_HOPOPTS, IPV6_RECVDSTOPTS, IPV6_DSTOPTS, IPV6_RTHDRDSTOPTS, IPV6_RECVRTHDR, IPV6_RTHDR, IPV6_RECVHOPOPTS, IPV6_HOPOPTS Old semantics are preserved as IPV6_2292xxxx so that we can maintain backward compatibility. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-09-07 18:59:17 -06:00
put_cmsg(msg, SOL_IPV6, IPV6_2292HOPLIMIT, sizeof(hlim), &hlim);
}
ipv6: use flag instead of u16 for hop in inet6_skb_parm Hop was always either 0 or sizeof(struct ipv6hdr). Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-08 15:32:12 -06:00
if (np->rxopt.bits.ohopopts && (opt->flags & IP6SKB_HOPBYHOP)) {
u8 *ptr = nh + sizeof(struct ipv6hdr);
[IPV6]: Support several new sockopt / ancillary data in Advanced API (RFC3542). Support several new socket options / ancillary data: IPV6_RECVPKTINFO, IPV6_PKTINFO, IPV6_RECVHOPOPTS, IPV6_HOPOPTS, IPV6_RECVDSTOPTS, IPV6_DSTOPTS, IPV6_RTHDRDSTOPTS, IPV6_RECVRTHDR, IPV6_RTHDR, IPV6_RECVHOPOPTS, IPV6_HOPOPTS Old semantics are preserved as IPV6_2292xxxx so that we can maintain backward compatibility. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-09-07 18:59:17 -06:00
put_cmsg(msg, SOL_IPV6, IPV6_2292HOPOPTS, (ptr[1]+1)<<3, ptr);
}
if (np->rxopt.bits.odstopts && opt->dst0) {
[SK_BUFF]: Introduce skb_network_header() For the places where we need a pointer to the network header, it is still legal to touch skb->nh.raw directly if just adding to, subtracting from or setting it to another layer header. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-10 21:50:43 -06:00
u8 *ptr = nh + opt->dst0;
[IPV6]: Support several new sockopt / ancillary data in Advanced API (RFC3542). Support several new socket options / ancillary data: IPV6_RECVPKTINFO, IPV6_PKTINFO, IPV6_RECVHOPOPTS, IPV6_HOPOPTS, IPV6_RECVDSTOPTS, IPV6_DSTOPTS, IPV6_RTHDRDSTOPTS, IPV6_RECVRTHDR, IPV6_RTHDR, IPV6_RECVHOPOPTS, IPV6_HOPOPTS Old semantics are preserved as IPV6_2292xxxx so that we can maintain backward compatibility. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-09-07 18:59:17 -06:00
put_cmsg(msg, SOL_IPV6, IPV6_2292DSTOPTS, (ptr[1]+1)<<3, ptr);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
}
[IPV6]: Support several new sockopt / ancillary data in Advanced API (RFC3542). Support several new socket options / ancillary data: IPV6_RECVPKTINFO, IPV6_PKTINFO, IPV6_RECVHOPOPTS, IPV6_HOPOPTS, IPV6_RECVDSTOPTS, IPV6_DSTOPTS, IPV6_RTHDRDSTOPTS, IPV6_RECVRTHDR, IPV6_RTHDR, IPV6_RECVHOPOPTS, IPV6_HOPOPTS Old semantics are preserved as IPV6_2292xxxx so that we can maintain backward compatibility. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-09-07 18:59:17 -06:00
if (np->rxopt.bits.osrcrt && opt->srcrt) {
[SK_BUFF]: Introduce skb_network_header() For the places where we need a pointer to the network header, it is still legal to touch skb->nh.raw directly if just adding to, subtracting from or setting it to another layer header. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-10 21:50:43 -06:00
struct ipv6_rt_hdr *rthdr = (struct ipv6_rt_hdr *)(nh + opt->srcrt);
[IPV6]: Support several new sockopt / ancillary data in Advanced API (RFC3542). Support several new socket options / ancillary data: IPV6_RECVPKTINFO, IPV6_PKTINFO, IPV6_RECVHOPOPTS, IPV6_HOPOPTS, IPV6_RECVDSTOPTS, IPV6_DSTOPTS, IPV6_RTHDRDSTOPTS, IPV6_RECVRTHDR, IPV6_RTHDR, IPV6_RECVHOPOPTS, IPV6_HOPOPTS Old semantics are preserved as IPV6_2292xxxx so that we can maintain backward compatibility. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-09-07 18:59:17 -06:00
put_cmsg(msg, SOL_IPV6, IPV6_2292RTHDR, (rthdr->hdrlen+1) << 3, rthdr);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
}
[IPV6]: Support several new sockopt / ancillary data in Advanced API (RFC3542). Support several new socket options / ancillary data: IPV6_RECVPKTINFO, IPV6_PKTINFO, IPV6_RECVHOPOPTS, IPV6_HOPOPTS, IPV6_RECVDSTOPTS, IPV6_DSTOPTS, IPV6_RTHDRDSTOPTS, IPV6_RECVRTHDR, IPV6_RTHDR, IPV6_RECVHOPOPTS, IPV6_HOPOPTS Old semantics are preserved as IPV6_2292xxxx so that we can maintain backward compatibility. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-09-07 18:59:17 -06:00
if (np->rxopt.bits.odstopts && opt->dst1) {
[SK_BUFF]: Introduce skb_network_header() For the places where we need a pointer to the network header, it is still legal to touch skb->nh.raw directly if just adding to, subtracting from or setting it to another layer header. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-10 21:50:43 -06:00
u8 *ptr = nh + opt->dst1;
[IPV6]: Support several new sockopt / ancillary data in Advanced API (RFC3542). Support several new socket options / ancillary data: IPV6_RECVPKTINFO, IPV6_PKTINFO, IPV6_RECVHOPOPTS, IPV6_HOPOPTS, IPV6_RECVDSTOPTS, IPV6_DSTOPTS, IPV6_RTHDRDSTOPTS, IPV6_RECVRTHDR, IPV6_RTHDR, IPV6_RECVHOPOPTS, IPV6_HOPOPTS Old semantics are preserved as IPV6_2292xxxx so that we can maintain backward compatibility. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-09-07 18:59:17 -06:00
put_cmsg(msg, SOL_IPV6, IPV6_2292DSTOPTS, (ptr[1]+1)<<3, ptr);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
}
tproxy: added tproxy sockopt interface in the IPV6 layer Support for IPV6_RECVORIGDSTADDR sockopt for UDP sockets were contributed by Harry Mason. Signed-off-by: Balazs Scheidler <bazsi@balabit.hu> Signed-off-by: KOVACS Krisztian <hidden@balabit.hu> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-10-21 08:08:28 -06:00
if (np->rxopt.bits.rxorigdstaddr) {
struct sockaddr_in6 sin6;
net: fix some sparse errors make C=2 CF="-D__CHECK_ENDIAN__" M=net And fix flowi4_init_output() prototype for sport Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-16 12:27:39 -07:00
__be16 *ports = (__be16 *) skb_transport_header(skb);
tproxy: added tproxy sockopt interface in the IPV6 layer Support for IPV6_RECVORIGDSTADDR sockopt for UDP sockets were contributed by Harry Mason. Signed-off-by: Balazs Scheidler <bazsi@balabit.hu> Signed-off-by: KOVACS Krisztian <hidden@balabit.hu> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-10-21 08:08:28 -06:00
if (skb_transport_offset(skb) + 4 <= skb->len) {
/* All current transport protocols have the port numbers in the
* first four bytes of the transport header and this function is
* written with this assumption in mind.
*/
sin6.sin6_family = AF_INET6;
net: remove ipv6_addr_copy() C assignment can handle struct in6_addr copying. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-20 20:39:03 -07:00
sin6.sin6_addr = ipv6_hdr(skb)->daddr;
tproxy: added tproxy sockopt interface in the IPV6 layer Support for IPV6_RECVORIGDSTADDR sockopt for UDP sockets were contributed by Harry Mason. Signed-off-by: Balazs Scheidler <bazsi@balabit.hu> Signed-off-by: KOVACS Krisztian <hidden@balabit.hu> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-10-21 08:08:28 -06:00
sin6.sin6_port = ports[1];
sin6.sin6_flowinfo = 0;
ipv6: report sin6_scope_id if sockopt RECVORIGDSTADDR is set v4: a) unchanged Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-07 19:07:26 -07:00
sin6.sin6_scope_id =
ipv6_iface_scope_id(&ipv6_hdr(skb)->daddr,
opt->iif);
tproxy: added tproxy sockopt interface in the IPV6 layer Support for IPV6_RECVORIGDSTADDR sockopt for UDP sockets were contributed by Harry Mason. Signed-off-by: Balazs Scheidler <bazsi@balabit.hu> Signed-off-by: KOVACS Krisztian <hidden@balabit.hu> Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-10-21 08:08:28 -06:00
put_cmsg(msg, SOL_IPV6, IPV6_ORIGDSTADDR, sizeof(sin6), &sin6);
}
}
ipv6: make IPV6_RECVPKTINFO work for ipv4 datagrams We currently don't report IPV6_RECVPKTINFO in cmsg access ancillary data for IPv4 datagrams on IPv6 sockets. This patch splits the ip6_datagram_recv_ctl into two functions, one which handles both protocol families, AF_INET and AF_INET6, while the ip6_datagram_recv_specific_ctl only handles IPv6 cmsg data. ip6_datagram_recv_*_ctl never reported back any errors, so we can make them return void. Also provide a helper for protocols which don't offer dual personality to further use ip6_datagram_recv_ctl, which is exported to modules. I needed to shuffle the code for ping around a bit to make it easier to implement dual personality for ping ipv6 sockets in future. Reported-by: Gert Doering <gert@space.net> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-19 19:43:08 -07:00
}
void ip6_datagram_recv_ctl(struct sock *sk, struct msghdr *msg,
struct sk_buff *skb)
{
ip6_datagram_recv_common_ctl(sk, msg, skb);
ip6_datagram_recv_specific_ctl(sk, msg, skb);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
}
ipv6: export ip6_datagram_recv_ctl ip6_datagram_recv_ctl and ip6_datagram_send_ctl are used for handling IPv6 ancillary data. Since ip6_datagram_send_ctl is already publicly exported for use in modules, ip6_datagram_recv_ctl should also be available to support ancillary data in the receive path. Signed-off-by: Tom Parkin <tparkin@katalix.com> Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-30 18:02:25 -07:00
EXPORT_SYMBOL_GPL(ip6_datagram_recv_ctl);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
ipv6: rename datagram_send_ctl and datagram_recv_ctl The datagram_*_ctl functions in net/ipv6/datagram.c are IPv6-specific. Since datagram_send_ctl is publicly exported it should be appropriately named to reflect the fact that it's for IPv6 only. Signed-off-by: Tom Parkin <tparkin@katalix.com> Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-30 18:02:24 -07:00
int ip6_datagram_send_ctl(struct net *net, struct sock *sk,
struct msghdr *msg, struct flowi6 *fl6,
ipv6: add new struct ipcm6_cookie In the sendmsg function of UDP, raw, ICMP and l2tp sockets, we use local variables like hlimits, tclass, opt and dontfrag and pass them to corresponding functions like ip6_make_skb, ip6_append_data and xxx_push_pending_frames. This is not a good practice and makes it hard to add new parameters. This fix introduces a new struct ipcm6_cookie similar to ipcm_cookie in ipv4 and include the above mentioned variables. And we only pass the pointer to this structure to corresponding functions. This makes it easier to add new parameters in the future and makes the function cleaner. Signed-off-by: Wei Wang <weiwan@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-02 22:40:07 -06:00
struct ipcm6_cookie *ipc6, struct sockcm_cookie *sockc)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
{
struct in6_pktinfo *src_info;
struct cmsghdr *cmsg;
struct ipv6_rt_hdr *rthdr;
struct ipv6_opt_hdr *hdr;
ipv6: add new struct ipcm6_cookie In the sendmsg function of UDP, raw, ICMP and l2tp sockets, we use local variables like hlimits, tclass, opt and dontfrag and pass them to corresponding functions like ip6_make_skb, ip6_append_data and xxx_push_pending_frames. This is not a good practice and makes it hard to add new parameters. This fix introduces a new struct ipcm6_cookie similar to ipcm_cookie in ipv4 and include the above mentioned variables. And we only pass the pointer to this structure to corresponding functions. This makes it easier to add new parameters in the future and makes the function cleaner. Signed-off-by: Wei Wang <weiwan@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-02 22:40:07 -06:00
struct ipv6_txoptions *opt = ipc6->opt;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
int len;
int err = 0;
net: introduce helper macro for_each_cmsghdr Introduce helper macro for_each_cmsghdr as a wrapper of the enumerating cmsghdr from msghdr, just cleanup. Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-10 20:22:04 -07:00
for_each_cmsghdr(cmsg, msg) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
int addr_type;
if (!CMSG_OK(msg, cmsg)) {
err = -EINVAL;
goto exit_f;
}
ipv6: process socket-level control messages in IPv6 Process socket-level control messages by invoking __sock_cmsg_send in ip6_datagram_send_ctl for control messages on the SOL_SOCKET layer. This makes sure whenever ip6_datagram_send_ctl is called for udp and raw, we also process socket-level control messages. This is a bit uglier than IPv4, since IPv6 does not have something like ipcm_cookie. Perhaps we can later create a control message cookie for IPv6? Note that this commit interprets new control messages that were ignored before. As such, this commit does not change the behavior of IPv6 control messages. Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-02 21:08:11 -06:00
if (cmsg->cmsg_level == SOL_SOCKET) {
sock: propagate __sock_cmsg_send() error __sock_cmsg_send() might return different error codes, not only -EINVAL. Fixes: 24025c465f77 ("ipv4: process socket-level control messages in IPv4") Fixes: ad1e46a83716 ("ipv6: process socket-level control messages in IPv6") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-13 07:14:37 -06:00
err = __sock_cmsg_send(sk, msg, cmsg, sockc);
if (err)
return err;
ipv6: process socket-level control messages in IPv6 Process socket-level control messages by invoking __sock_cmsg_send in ip6_datagram_send_ctl for control messages on the SOL_SOCKET layer. This makes sure whenever ip6_datagram_send_ctl is called for udp and raw, we also process socket-level control messages. This is a bit uglier than IPv4, since IPv6 does not have something like ipcm_cookie. Perhaps we can later create a control message cookie for IPv6? Note that this commit interprets new control messages that were ignored before. As such, this commit does not change the behavior of IPv6 control messages. Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-02 21:08:11 -06:00
continue;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
if (cmsg->cmsg_level != SOL_IPV6)
continue;
switch (cmsg->cmsg_type) {
[NET] IPV6: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 07:24:49 -07:00
case IPV6_PKTINFO:
case IPV6_2292PKTINFO:
[IPV6]: Check outgoing interface even if source address is unspecified. The outgoing interface index (ipi6_ifindex) in IPV6_PKTINFO ancillary data, is not checked if the source address (ipi6_addr) is unspecified. If the ipi6_ifindex is the not-exist interface, it should be fail. Based on patch from Shan Wei <shanwei@cn.fujitsu.com> and Brian Haley <brian.haley@hp.com>. Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-06-03 22:01:37 -06:00
{
struct net_device *dev = NULL;
[NET] IPV6: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 07:24:49 -07:00
if (cmsg->cmsg_len < CMSG_LEN(sizeof(struct in6_pktinfo))) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
err = -EINVAL;
goto exit_f;
}
src_info = (struct in6_pktinfo *)CMSG_DATA(cmsg);
[NET] IPV6: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 07:24:49 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
if (src_info->ipi6_ifindex) {
ipv6: Convert to use flowi6 where applicable. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-12 14:22:43 -07:00
if (fl6->flowi6_oif &&
src_info->ipi6_ifindex != fl6->flowi6_oif)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
return -EINVAL;
ipv6: Convert to use flowi6 where applicable. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-12 14:22:43 -07:00
fl6->flowi6_oif = src_info->ipi6_ifindex;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
}
[IPV6]: Check outgoing interface even if source address is unspecified. The outgoing interface index (ipi6_ifindex) in IPV6_PKTINFO ancillary data, is not checked if the source address (ipi6_addr) is unspecified. If the ipi6_ifindex is the not-exist interface, it should be fail. Based on patch from Shan Wei <shanwei@cn.fujitsu.com> and Brian Haley <brian.haley@hp.com>. Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-06-03 22:01:37 -06:00
addr_type = __ipv6_addr_type(&src_info->ipi6_addr);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
ipv6: no more dev_put() in datagram_send_ctl() Avoids touching device refcount in datagram_send_ctl(), thanks to RCU Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-02 04:21:06 -07:00
rcu_read_lock();
ipv6: Convert to use flowi6 where applicable. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-12 14:22:43 -07:00
if (fl6->flowi6_oif) {
dev = dev_get_by_index_rcu(net, fl6->flowi6_oif);
ipv6: no more dev_put() in datagram_send_ctl() Avoids touching device refcount in datagram_send_ctl(), thanks to RCU Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-02 04:21:06 -07:00
if (!dev) {
rcu_read_unlock();
[IPV6]: Check outgoing interface even if source address is unspecified. The outgoing interface index (ipi6_ifindex) in IPV6_PKTINFO ancillary data, is not checked if the source address (ipi6_addr) is unspecified. If the ipi6_ifindex is the not-exist interface, it should be fail. Based on patch from Shan Wei <shanwei@cn.fujitsu.com> and Brian Haley <brian.haley@hp.com>. Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-06-03 22:01:37 -06:00
return -ENODEV;
ipv6: no more dev_put() in datagram_send_ctl() Avoids touching device refcount in datagram_send_ctl(), thanks to RCU Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-02 04:21:06 -07:00
}
} else if (addr_type & IPV6_ADDR_LINKLOCAL) {
rcu_read_unlock();
[IPV6]: Check outgoing interface even if source address is unspecified. The outgoing interface index (ipi6_ifindex) in IPV6_PKTINFO ancillary data, is not checked if the source address (ipi6_addr) is unspecified. If the ipi6_ifindex is the not-exist interface, it should be fail. Based on patch from Shan Wei <shanwei@cn.fujitsu.com> and Brian Haley <brian.haley@hp.com>. Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-06-03 22:01:37 -06:00
return -EINVAL;
ipv6: no more dev_put() in datagram_send_ctl() Avoids touching device refcount in datagram_send_ctl(), thanks to RCU Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-02 04:21:06 -07:00
}
[NET] IPV6: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 07:24:49 -07:00
[IPV6]: Check outgoing interface even if source address is unspecified. The outgoing interface index (ipi6_ifindex) in IPV6_PKTINFO ancillary data, is not checked if the source address (ipi6_addr) is unspecified. If the ipi6_ifindex is the not-exist interface, it should be fail. Based on patch from Shan Wei <shanwei@cn.fujitsu.com> and Brian Haley <brian.haley@hp.com>. Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-06-03 22:01:37 -06:00
if (addr_type != IPV6_ADDR_ANY) {
int strict = __ipv6_addr_src_scope(addr_type) <= IPV6_ADDR_SCOPE_LINKLOCAL;
net: make ipv6 PKTINFO honour freebind This just makes it possible to spoof source IPv6 address on a socket without having to create and bind a new socket for every source IP we wish to spoof. Signed-off-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-07 07:57:22 -07:00
if (!(inet_sk(sk)->freebind || inet_sk(sk)->transparent) &&
net: relax PKTINFO non local ipv6 udp xmit check Allow transparent sockets to be less restrictive about the source ip of ipv6 udp packets being sent. Google-Bug-Id: 5018138 Signed-off-by: Maciej Żenczykowski <maze@google.com> CC: "Erik Kline" <ek@google.com> CC: "Lorenzo Colitti" <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-28 06:35:31 -06:00
!ipv6_chk_addr(net, &src_info->ipi6_addr,
ipv6: enable anycast addresses as source addresses for datagrams This change allows to consider an anycast address valid as source address when given via an IPV6_PKTINFO or IPV6_2292PKTINFO ancillary data item. So, when sending a datagram with ancillary data, the unicast and anycast addresses are handled in the same way. - Adds ipv6_chk_acast_addr_src() to check if an anycast address is link-local on given interface or is global. - Uses it in ip6_datagram_send_ctl(). Signed-off-by: Francois-Xavier Le Bail <fx.lebail@yahoo.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-21 23:42:37 -07:00
strict ? dev : NULL, 0) &&
!ipv6_chk_acast_addr_src(net, dev,
&src_info->ipi6_addr))
[IPV6]: Check outgoing interface even if source address is unspecified. The outgoing interface index (ipi6_ifindex) in IPV6_PKTINFO ancillary data, is not checked if the source address (ipi6_addr) is unspecified. If the ipi6_ifindex is the not-exist interface, it should be fail. Based on patch from Shan Wei <shanwei@cn.fujitsu.com> and Brian Haley <brian.haley@hp.com>. Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-06-03 22:01:37 -06:00
err = -EINVAL;
else
net: remove ipv6_addr_copy() C assignment can handle struct in6_addr copying. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-20 20:39:03 -07:00
fl6->saddr = src_info->ipi6_addr;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
}
[IPV6]: Check outgoing interface even if source address is unspecified. The outgoing interface index (ipi6_ifindex) in IPV6_PKTINFO ancillary data, is not checked if the source address (ipi6_addr) is unspecified. If the ipi6_ifindex is the not-exist interface, it should be fail. Based on patch from Shan Wei <shanwei@cn.fujitsu.com> and Brian Haley <brian.haley@hp.com>. Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-06-03 22:01:37 -06:00
ipv6: no more dev_put() in datagram_send_ctl() Avoids touching device refcount in datagram_send_ctl(), thanks to RCU Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-02 04:21:06 -07:00
rcu_read_unlock();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
[IPV6]: Check outgoing interface even if source address is unspecified. The outgoing interface index (ipi6_ifindex) in IPV6_PKTINFO ancillary data, is not checked if the source address (ipi6_addr) is unspecified. If the ipi6_ifindex is the not-exist interface, it should be fail. Based on patch from Shan Wei <shanwei@cn.fujitsu.com> and Brian Haley <brian.haley@hp.com>. Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-06-03 22:01:37 -06:00
if (err)
goto exit_f;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
break;
[IPV6]: Check outgoing interface even if source address is unspecified. The outgoing interface index (ipi6_ifindex) in IPV6_PKTINFO ancillary data, is not checked if the source address (ipi6_addr) is unspecified. If the ipi6_ifindex is the not-exist interface, it should be fail. Based on patch from Shan Wei <shanwei@cn.fujitsu.com> and Brian Haley <brian.haley@hp.com>. Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-06-03 22:01:37 -06:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
case IPV6_FLOWINFO:
[NET] IPV6: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 07:24:49 -07:00
if (cmsg->cmsg_len < CMSG_LEN(4)) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
err = -EINVAL;
goto exit_f;
}
ipv6: Convert to use flowi6 where applicable. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-12 14:22:43 -07:00
if (fl6->flowlabel&IPV6_FLOWINFO_MASK) {
if ((fl6->flowlabel^*(__be32 *)CMSG_DATA(cmsg))&~IPV6_FLOWINFO_MASK) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
err = -EINVAL;
goto exit_f;
}
}
ipv6: Convert to use flowi6 where applicable. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-12 14:22:43 -07:00
fl6->flowlabel = IPV6_FLOWINFO_MASK & *(__be32 *)CMSG_DATA(cmsg);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
break;
[IPV6]: Support several new sockopt / ancillary data in Advanced API (RFC3542). Support several new socket options / ancillary data: IPV6_RECVPKTINFO, IPV6_PKTINFO, IPV6_RECVHOPOPTS, IPV6_HOPOPTS, IPV6_RECVDSTOPTS, IPV6_DSTOPTS, IPV6_RTHDRDSTOPTS, IPV6_RECVRTHDR, IPV6_RTHDR, IPV6_RECVHOPOPTS, IPV6_HOPOPTS Old semantics are preserved as IPV6_2292xxxx so that we can maintain backward compatibility. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-09-07 18:59:17 -06:00
case IPV6_2292HOPOPTS:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
case IPV6_HOPOPTS:
[NET] IPV6: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 07:24:49 -07:00
if (opt->hopopt || cmsg->cmsg_len < CMSG_LEN(sizeof(struct ipv6_opt_hdr))) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
err = -EINVAL;
goto exit_f;
}
hdr = (struct ipv6_opt_hdr *)CMSG_DATA(cmsg);
len = ((hdr->hdrlen + 1) << 3);
if (cmsg->cmsg_len < CMSG_LEN(len)) {
err = -EINVAL;
goto exit_f;
}
net: Allow userns root to control ipv6 Allow an unpriviled user who has created a user namespace, and then created a network namespace to effectively use the new network namespace, by reducing capable(CAP_NET_ADMIN) and capable(CAP_NET_RAW) calls to be ns_capable(net->user_ns, CAP_NET_ADMIN), or capable(net->user_ns, CAP_NET_RAW) calls. Settings that merely control a single network device are allowed. Either the network device is a logical network device where restrictions make no difference or the network device is hardware NIC that has been explicity moved from the initial network namespace. In general policy and network stack state changes are allowed while resource control is left unchanged. Allow the SIOCSIFADDR ioctl to add ipv6 addresses. Allow the SIOCDIFADDR ioctl to delete ipv6 addresses. Allow the SIOCADDRT ioctl to add ipv6 routes. Allow the SIOCDELRT ioctl to delete ipv6 routes. Allow creation of ipv6 raw sockets. Allow setting the IPV6_JOIN_ANYCAST socket option. Allow setting the IPV6_FL_A_RENEW parameter of the IPV6_FLOWLABEL_MGR socket option. Allow setting the IPV6_TRANSPARENT socket option. Allow setting the IPV6_HOPOPTS socket option. Allow setting the IPV6_RTHDRDSTOPTS socket option. Allow setting the IPV6_DSTOPTS socket option. Allow setting the IPV6_IPSEC_POLICY socket option. Allow setting the IPV6_XFRM_POLICY socket option. Allow sending packets with the IPV6_2292HOPOPTS control message. Allow sending packets with the IPV6_2292DSTOPTS control message. Allow sending packets with the IPV6_RTHDRDSTOPTS control message. Allow setting the multicast routing socket options on non multicast routing sockets. Allow the SIOCADDTUNNEL, SIOCCHGTUNNEL, and SIOCDELTUNNEL ioctls for setting up, changing and deleting tunnels over ipv6. Allow the SIOCADDTUNNEL, SIOCCHGTUNNEL, SIOCDELTUNNEL ioctls for setting up, changing and deleting ipv6 over ipv4 tunnels. Allow the SIOCADDPRL, SIOCDELPRL, SIOCCHGPRL ioctls for adding, deleting, and changing the potential router list for ISATAP tunnels. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-15 20:03:06 -07:00
if (!ns_capable(net->user_ns, CAP_NET_RAW)) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
err = -EPERM;
goto exit_f;
}
opt->opt_nflen += len;
opt->hopopt = hdr;
break;
[IPV6]: Support several new sockopt / ancillary data in Advanced API (RFC3542). Support several new socket options / ancillary data: IPV6_RECVPKTINFO, IPV6_PKTINFO, IPV6_RECVHOPOPTS, IPV6_HOPOPTS, IPV6_RECVDSTOPTS, IPV6_DSTOPTS, IPV6_RTHDRDSTOPTS, IPV6_RECVRTHDR, IPV6_RTHDR, IPV6_RECVHOPOPTS, IPV6_HOPOPTS Old semantics are preserved as IPV6_2292xxxx so that we can maintain backward compatibility. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-09-07 18:59:17 -06:00
case IPV6_2292DSTOPTS:
[NET] IPV6: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 07:24:49 -07:00
if (cmsg->cmsg_len < CMSG_LEN(sizeof(struct ipv6_opt_hdr))) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
err = -EINVAL;
goto exit_f;
}
hdr = (struct ipv6_opt_hdr *)CMSG_DATA(cmsg);
len = ((hdr->hdrlen + 1) << 3);
if (cmsg->cmsg_len < CMSG_LEN(len)) {
err = -EINVAL;
goto exit_f;
}
net: Allow userns root to control ipv6 Allow an unpriviled user who has created a user namespace, and then created a network namespace to effectively use the new network namespace, by reducing capable(CAP_NET_ADMIN) and capable(CAP_NET_RAW) calls to be ns_capable(net->user_ns, CAP_NET_ADMIN), or capable(net->user_ns, CAP_NET_RAW) calls. Settings that merely control a single network device are allowed. Either the network device is a logical network device where restrictions make no difference or the network device is hardware NIC that has been explicity moved from the initial network namespace. In general policy and network stack state changes are allowed while resource control is left unchanged. Allow the SIOCSIFADDR ioctl to add ipv6 addresses. Allow the SIOCDIFADDR ioctl to delete ipv6 addresses. Allow the SIOCADDRT ioctl to add ipv6 routes. Allow the SIOCDELRT ioctl to delete ipv6 routes. Allow creation of ipv6 raw sockets. Allow setting the IPV6_JOIN_ANYCAST socket option. Allow setting the IPV6_FL_A_RENEW parameter of the IPV6_FLOWLABEL_MGR socket option. Allow setting the IPV6_TRANSPARENT socket option. Allow setting the IPV6_HOPOPTS socket option. Allow setting the IPV6_RTHDRDSTOPTS socket option. Allow setting the IPV6_DSTOPTS socket option. Allow setting the IPV6_IPSEC_POLICY socket option. Allow setting the IPV6_XFRM_POLICY socket option. Allow sending packets with the IPV6_2292HOPOPTS control message. Allow sending packets with the IPV6_2292DSTOPTS control message. Allow sending packets with the IPV6_RTHDRDSTOPTS control message. Allow setting the multicast routing socket options on non multicast routing sockets. Allow the SIOCADDTUNNEL, SIOCCHGTUNNEL, and SIOCDELTUNNEL ioctls for setting up, changing and deleting tunnels over ipv6. Allow the SIOCADDTUNNEL, SIOCCHGTUNNEL, SIOCDELTUNNEL ioctls for setting up, changing and deleting ipv6 over ipv4 tunnels. Allow the SIOCADDPRL, SIOCDELPRL, SIOCCHGPRL ioctls for adding, deleting, and changing the potential router list for ISATAP tunnels. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-15 20:03:06 -07:00
if (!ns_capable(net->user_ns, CAP_NET_RAW)) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
err = -EPERM;
goto exit_f;
}
if (opt->dst1opt) {
err = -EINVAL;
goto exit_f;
}
opt->opt_flen += len;
opt->dst1opt = hdr;
break;
[IPV6]: Support several new sockopt / ancillary data in Advanced API (RFC3542). Support several new socket options / ancillary data: IPV6_RECVPKTINFO, IPV6_PKTINFO, IPV6_RECVHOPOPTS, IPV6_HOPOPTS, IPV6_RECVDSTOPTS, IPV6_DSTOPTS, IPV6_RTHDRDSTOPTS, IPV6_RECVRTHDR, IPV6_RTHDR, IPV6_RECVHOPOPTS, IPV6_HOPOPTS Old semantics are preserved as IPV6_2292xxxx so that we can maintain backward compatibility. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-09-07 18:59:17 -06:00
case IPV6_DSTOPTS:
case IPV6_RTHDRDSTOPTS:
if (cmsg->cmsg_len < CMSG_LEN(sizeof(struct ipv6_opt_hdr))) {
err = -EINVAL;
goto exit_f;
}
hdr = (struct ipv6_opt_hdr *)CMSG_DATA(cmsg);
len = ((hdr->hdrlen + 1) << 3);
if (cmsg->cmsg_len < CMSG_LEN(len)) {
err = -EINVAL;
goto exit_f;
}
net: Allow userns root to control ipv6 Allow an unpriviled user who has created a user namespace, and then created a network namespace to effectively use the new network namespace, by reducing capable(CAP_NET_ADMIN) and capable(CAP_NET_RAW) calls to be ns_capable(net->user_ns, CAP_NET_ADMIN), or capable(net->user_ns, CAP_NET_RAW) calls. Settings that merely control a single network device are allowed. Either the network device is a logical network device where restrictions make no difference or the network device is hardware NIC that has been explicity moved from the initial network namespace. In general policy and network stack state changes are allowed while resource control is left unchanged. Allow the SIOCSIFADDR ioctl to add ipv6 addresses. Allow the SIOCDIFADDR ioctl to delete ipv6 addresses. Allow the SIOCADDRT ioctl to add ipv6 routes. Allow the SIOCDELRT ioctl to delete ipv6 routes. Allow creation of ipv6 raw sockets. Allow setting the IPV6_JOIN_ANYCAST socket option. Allow setting the IPV6_FL_A_RENEW parameter of the IPV6_FLOWLABEL_MGR socket option. Allow setting the IPV6_TRANSPARENT socket option. Allow setting the IPV6_HOPOPTS socket option. Allow setting the IPV6_RTHDRDSTOPTS socket option. Allow setting the IPV6_DSTOPTS socket option. Allow setting the IPV6_IPSEC_POLICY socket option. Allow setting the IPV6_XFRM_POLICY socket option. Allow sending packets with the IPV6_2292HOPOPTS control message. Allow sending packets with the IPV6_2292DSTOPTS control message. Allow sending packets with the IPV6_RTHDRDSTOPTS control message. Allow setting the multicast routing socket options on non multicast routing sockets. Allow the SIOCADDTUNNEL, SIOCCHGTUNNEL, and SIOCDELTUNNEL ioctls for setting up, changing and deleting tunnels over ipv6. Allow the SIOCADDTUNNEL, SIOCCHGTUNNEL, SIOCDELTUNNEL ioctls for setting up, changing and deleting ipv6 over ipv4 tunnels. Allow the SIOCADDPRL, SIOCDELPRL, SIOCCHGPRL ioctls for adding, deleting, and changing the potential router list for ISATAP tunnels. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-15 20:03:06 -07:00
if (!ns_capable(net->user_ns, CAP_NET_RAW)) {
[IPV6]: Support several new sockopt / ancillary data in Advanced API (RFC3542). Support several new socket options / ancillary data: IPV6_RECVPKTINFO, IPV6_PKTINFO, IPV6_RECVHOPOPTS, IPV6_HOPOPTS, IPV6_RECVDSTOPTS, IPV6_DSTOPTS, IPV6_RTHDRDSTOPTS, IPV6_RECVRTHDR, IPV6_RTHDR, IPV6_RECVHOPOPTS, IPV6_HOPOPTS Old semantics are preserved as IPV6_2292xxxx so that we can maintain backward compatibility. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-09-07 18:59:17 -06:00
err = -EPERM;
goto exit_f;
}
if (cmsg->cmsg_type == IPV6_DSTOPTS) {
opt->opt_flen += len;
opt->dst1opt = hdr;
} else {
opt->opt_nflen += len;
opt->dst0opt = hdr;
}
break;
case IPV6_2292RTHDR:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
case IPV6_RTHDR:
[NET] IPV6: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 07:24:49 -07:00
if (cmsg->cmsg_len < CMSG_LEN(sizeof(struct ipv6_rt_hdr))) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
err = -EINVAL;
goto exit_f;
}
rthdr = (struct ipv6_rt_hdr *)CMSG_DATA(cmsg);
[IPV6] MIP6: Add socket option and ancillary data interface of routing header type 2. Add socket option and ancillary data interface of routing header type 2. Mobile IPv6 application will use this to send binding acknowledgement with the header without relation of confirmed route optimization (binding). Based on MIPL2 kernel patch. Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-23 20:17:12 -06:00
switch (rthdr->type) {
ipv6: use IS_ENABLED() #if defined(CONFIG_FOO) || defined(CONFIG_FOO_MODULE) can be replaced by #if IS_ENABLED(CONFIG_FOO) Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-29 10:23:10 -06:00
#if IS_ENABLED(CONFIG_IPV6_MIP6)
[IPV6] MIP6: Add socket option and ancillary data interface of routing header type 2. Add socket option and ancillary data interface of routing header type 2. Mobile IPv6 application will use this to send binding acknowledgement with the header without relation of confirmed route optimization (binding). Based on MIPL2 kernel patch. Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-23 20:17:12 -06:00
case IPV6_SRCRT_TYPE_2:
ipv6: routing header fixes This patch fixes two bugs: 1. setsockopt() of anything but a Type 2 routing header should return EINVAL instead of EPERM. Noticed by Shan Wei (shanwei@cn.fujitsu.com). 2. setsockopt()/sendmsg() of a Type 2 routing header with invalid length or segments should return EINVAL. These values are statically fixed in RFC 3775, unlike the variable Type 0 was. Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-12 23:59:21 -07:00
if (rthdr->hdrlen != 2 ||
rthdr->segments_left != 1) {
err = -EINVAL;
goto exit_f;
}
[IPV6] MIP6: Add socket option and ancillary data interface of routing header type 2. Add socket option and ancillary data interface of routing header type 2. Mobile IPv6 application will use this to send binding acknowledgement with the header without relation of confirmed route optimization (binding). Based on MIPL2 kernel patch. Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-23 20:17:12 -06:00
break;
[IPV6]: Do not send RH0 anymore. Based on <draft-ietf-ipv6-deprecate-rh0-00.txt>. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-07-10 23:55:49 -06:00
#endif
[IPV6] MIP6: Add socket option and ancillary data interface of routing header type 2. Add socket option and ancillary data interface of routing header type 2. Mobile IPv6 application will use this to send binding acknowledgement with the header without relation of confirmed route optimization (binding). Based on MIPL2 kernel patch. Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-23 20:17:12 -06:00
default:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
err = -EINVAL;
goto exit_f;
}
len = ((rthdr->hdrlen + 1) << 3);
[NET] IPV6: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 07:24:49 -07:00
if (cmsg->cmsg_len < CMSG_LEN(len)) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
err = -EINVAL;
goto exit_f;
}
/* segments left must also match */
if ((rthdr->hdrlen >> 1) != rthdr->segments_left) {
err = -EINVAL;
goto exit_f;
}
opt->opt_nflen += len;
opt->srcrt = rthdr;
[IPV6]: Support several new sockopt / ancillary data in Advanced API (RFC3542). Support several new socket options / ancillary data: IPV6_RECVPKTINFO, IPV6_PKTINFO, IPV6_RECVHOPOPTS, IPV6_HOPOPTS, IPV6_RECVDSTOPTS, IPV6_DSTOPTS, IPV6_RTHDRDSTOPTS, IPV6_RECVRTHDR, IPV6_RTHDR, IPV6_RECVHOPOPTS, IPV6_HOPOPTS Old semantics are preserved as IPV6_2292xxxx so that we can maintain backward compatibility. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-09-07 18:59:17 -06:00
if (cmsg->cmsg_type == IPV6_2292RTHDR && opt->dst1opt) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
int dsthdrlen = ((opt->dst1opt->hdrlen+1)<<3);
opt->opt_nflen += dsthdrlen;
opt->dst0opt = opt->dst1opt;
opt->dst1opt = NULL;
opt->opt_flen -= dsthdrlen;
}
break;
[IPV6]: Support several new sockopt / ancillary data in Advanced API (RFC3542). Support several new socket options / ancillary data: IPV6_RECVPKTINFO, IPV6_PKTINFO, IPV6_RECVHOPOPTS, IPV6_HOPOPTS, IPV6_RECVDSTOPTS, IPV6_DSTOPTS, IPV6_RTHDRDSTOPTS, IPV6_RECVRTHDR, IPV6_RTHDR, IPV6_RECVHOPOPTS, IPV6_HOPOPTS Old semantics are preserved as IPV6_2292xxxx so that we can maintain backward compatibility. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-09-07 18:59:17 -06:00
case IPV6_2292HOPLIMIT:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
case IPV6_HOPLIMIT:
if (cmsg->cmsg_len != CMSG_LEN(sizeof(int))) {
err = -EINVAL;
goto exit_f;
}
ipv6: add new struct ipcm6_cookie In the sendmsg function of UDP, raw, ICMP and l2tp sockets, we use local variables like hlimits, tclass, opt and dontfrag and pass them to corresponding functions like ip6_make_skb, ip6_append_data and xxx_push_pending_frames. This is not a good practice and makes it hard to add new parameters. This fix introduces a new struct ipcm6_cookie similar to ipcm_cookie in ipv4 and include the above mentioned variables. And we only pass the pointer to this structure to corresponding functions. This makes it easier to add new parameters in the future and makes the function cleaner. Signed-off-by: Wei Wang <weiwan@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-02 22:40:07 -06:00
ipc6->hlimit = *(int *)CMSG_DATA(cmsg);
if (ipc6->hlimit < -1 || ipc6->hlimit > 0xff) {
ipv6: Check the hop limit setting in ancillary data. When specifing the outgoing hop limit as ancillary data for sendmsg(), the kernel doesn't check the integer hop limit value as specified in [RFC-3542] section 6.3. Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2008-06-10 01:50:55 -06:00
err = -EINVAL;
goto exit_f;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
break;
[IPV6]: Support IPV6_{RECV,}TCLASS socket options / ancillary data. Based on patch from David L Stevens <dlstevens@us.ibm.com> Signed-off-by: David L Stevens <dlstevens@us.ibm.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-09-07 19:19:03 -06:00
case IPV6_TCLASS:
{
int tc;
err = -EINVAL;
net/ipv6/datagram.c: Checkpatch cleanups datagram.c:101: ERROR: "(foo*)" should be "(foo *)" datagram.c:521: ERROR: space required before the open parenthesis '(' datagram.c:830: WARNING: braces {} are not necessary for single statement blocks datagram.c:849: WARNING: braces {} are not necessary for single statement blocks Signed-off-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-01 01:49:03 -06:00
if (cmsg->cmsg_len != CMSG_LEN(sizeof(int)))
[IPV6]: Support IPV6_{RECV,}TCLASS socket options / ancillary data. Based on patch from David L Stevens <dlstevens@us.ibm.com> Signed-off-by: David L Stevens <dlstevens@us.ibm.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-09-07 19:19:03 -06:00
goto exit_f;
tc = *(int *)CMSG_DATA(cmsg);
[IPV6]: Accept -1 for IPV6_TCLASS This patch should add support for -1 as "default" IPv6 traffic class, as specified in IETF RFC3542 §6.5. Within the kernel, it seems tclass < 0 is already handled, but setsockopt, getsockopt and recvmsg calls won't accept it from userland. Signed-off-by: Remi Denis-Courmont <rdenis@simphalempin.com> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-09-13 21:08:07 -06:00
if (tc < -1 || tc > 0xff)
[IPV6]: Support IPV6_{RECV,}TCLASS socket options / ancillary data. Based on patch from David L Stevens <dlstevens@us.ibm.com> Signed-off-by: David L Stevens <dlstevens@us.ibm.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-09-07 19:19:03 -06:00
goto exit_f;
err = 0;
ipv6: add new struct ipcm6_cookie In the sendmsg function of UDP, raw, ICMP and l2tp sockets, we use local variables like hlimits, tclass, opt and dontfrag and pass them to corresponding functions like ip6_make_skb, ip6_append_data and xxx_push_pending_frames. This is not a good practice and makes it hard to add new parameters. This fix introduces a new struct ipcm6_cookie similar to ipcm_cookie in ipv4 and include the above mentioned variables. And we only pass the pointer to this structure to corresponding functions. This makes it easier to add new parameters in the future and makes the function cleaner. Signed-off-by: Wei Wang <weiwan@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-02 22:40:07 -06:00
ipc6->tclass = tc;
[IPV6]: Support IPV6_{RECV,}TCLASS socket options / ancillary data. Based on patch from David L Stevens <dlstevens@us.ibm.com> Signed-off-by: David L Stevens <dlstevens@us.ibm.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-09-07 19:19:03 -06:00
IPv6: Add dontfrag argument to relevant functions Add dontfrag argument to relevant functions for IPV6_DONTFRAG support, as well as allowing the value to be passed-in via ancillary cmsg data. Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-23 05:26:08 -06:00
break;
}
case IPV6_DONTFRAG:
{
int df;
err = -EINVAL;
net/ipv6/datagram.c: Checkpatch cleanups datagram.c:101: ERROR: "(foo*)" should be "(foo *)" datagram.c:521: ERROR: space required before the open parenthesis '(' datagram.c:830: WARNING: braces {} are not necessary for single statement blocks datagram.c:849: WARNING: braces {} are not necessary for single statement blocks Signed-off-by: Eldad Zack <eldad@fogrefinery.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-01 01:49:03 -06:00
if (cmsg->cmsg_len != CMSG_LEN(sizeof(int)))
IPv6: Add dontfrag argument to relevant functions Add dontfrag argument to relevant functions for IPV6_DONTFRAG support, as well as allowing the value to be passed-in via ancillary cmsg data. Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-23 05:26:08 -06:00
goto exit_f;
df = *(int *)CMSG_DATA(cmsg);
if (df < 0 || df > 1)
goto exit_f;
err = 0;
ipv6: add new struct ipcm6_cookie In the sendmsg function of UDP, raw, ICMP and l2tp sockets, we use local variables like hlimits, tclass, opt and dontfrag and pass them to corresponding functions like ip6_make_skb, ip6_append_data and xxx_push_pending_frames. This is not a good practice and makes it hard to add new parameters. This fix introduces a new struct ipcm6_cookie similar to ipcm_cookie in ipv4 and include the above mentioned variables. And we only pass the pointer to this structure to corresponding functions. This makes it easier to add new parameters in the future and makes the function cleaner. Signed-off-by: Wei Wang <weiwan@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-02 22:40:07 -06:00
ipc6->dontfrag = df;
IPv6: Add dontfrag argument to relevant functions Add dontfrag argument to relevant functions for IPV6_DONTFRAG support, as well as allowing the value to be passed-in via ancillary cmsg data. Signed-off-by: Brian Haley <brian.haley@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-23 05:26:08 -06:00
[IPV6]: Support IPV6_{RECV,}TCLASS socket options / ancillary data. Based on patch from David L Stevens <dlstevens@us.ibm.com> Signed-off-by: David L Stevens <dlstevens@us.ibm.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
2005-09-07 19:19:03 -06:00
break;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
default:
net: Convert LIMIT_NETDEBUG to net_dbg_ratelimited Use the more common dynamic_debug capable net_dbg_ratelimited and remove the LIMIT_NETDEBUG macro. All messages are still ratelimited. Some KERN_<LEVEL> uses are changed to KERN_DEBUG. This may have some negative impact on messages that were emitted at KERN_INFO that are not not enabled at all unless DEBUG is defined or dynamic_debug is enabled. Even so, these messages are now _not_ emitted by default. This also eliminates the use of the net_msg_warn sysctl "/proc/sys/net/core/warnings". For backward compatibility, the sysctl is not removed, but it has no function. The extern declaration of net_msg_warn is removed from sock.h and made static in net/core/sysctl_net_core.c Miscellanea: o Update the sysctl documentation o Remove the embedded uses of pr_fmt o Coalesce format fragments o Realign arguments Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-11 11:59:17 -07:00
net_dbg_ratelimited("invalid cmsg type: %d\n",
cmsg->cmsg_type);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
err = -EINVAL;
IPv6: datagram_send_ctl() should exit immediately when an error occured When an error occured, datagram_send_ctl() should exit immediately rather than continue to run the for loop. Otherwise, the variable err might be changed and the error might be hidden. Fix this bug by using "goto" instead of "break". Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-30 00:57:58 -06:00
goto exit_f;
[NET]: cleanup extra semicolons Spring cleaning time... There seems to be a lot of places in the network code that have extra bogus semicolons after conditionals. Most commonly is a bogus semicolon after: switch() { } Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-20 18:09:22 -06:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
}
exit_f:
return err;
}
ipv6: rename datagram_send_ctl and datagram_recv_ctl The datagram_*_ctl functions in net/ipv6/datagram.c are IPv6-specific. Since datagram_send_ctl is publicly exported it should be appropriately named to reflect the fact that it's for IPv6 only. Signed-off-by: Tom Parkin <tparkin@katalix.com> Signed-off-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-30 18:02:24 -07:00
EXPORT_SYMBOL_GPL(ip6_datagram_send_ctl);
net: ipv6: Unify {raw,udp}6_sock_seq_show. udp6_sock_seq_show and raw6_sock_seq_show are identical, except the UDP version displays ports and the raw version displays the protocol. Refactor most of the code in these two functions into a new common ip6_dgram_sock_seq_show function, in preparation for using it to display ICMPv6 sockets as well. Also reduce the indentation in parts of include/net/transp_v6.h to improve readability. Compiles and displays reasonable results with CONFIG_IPV6={n,m,y} Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-31 09:05:48 -06:00
void ip6_dgram_sock_seq_show(struct seq_file *seq, struct sock *sp,
__u16 srcp, __u16 destp, int bucket)
{
const struct in6_addr *dest, *src;
ipv6: make lookups simpler and faster TCP listener refactoring, part 4 : To speed up inet lookups, we moved IPv4 addresses from inet to struct sock_common Now is time to do the same for IPv6, because it permits us to have fast lookups for all kind of sockets, including upcoming SYN_RECV. Getting IPv6 addresses in TCP lookups currently requires two extra cache lines, plus a dereference (and memory stall). inet6_sk(sk) does the dereference of inet_sk(__sk)->pinet6 This patch is way bigger than its IPv4 counter part, because for IPv4, we could add aliases (inet_daddr, inet_rcv_saddr), while on IPv6, it's not doable easily. inet6_sk(sk)->daddr becomes sk->sk_v6_daddr inet6_sk(sk)->rcv_saddr becomes sk->sk_v6_rcv_saddr And timewait socket also have tw->tw_v6_daddr & tw->tw_v6_rcv_saddr at the same offset. We get rid of INET6_TW_MATCH() as INET6_MATCH() is now the generic macro. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-03 16:42:29 -06:00
dest = &sp->sk_v6_daddr;
src = &sp->sk_v6_rcv_saddr;
net: ipv6: Unify {raw,udp}6_sock_seq_show. udp6_sock_seq_show and raw6_sock_seq_show are identical, except the UDP version displays ports and the raw version displays the protocol. Refactor most of the code in these two functions into a new common ip6_dgram_sock_seq_show function, in preparation for using it to display ICMPv6 sockets as well. Also reduce the indentation in parts of include/net/transp_v6.h to improve readability. Compiles and displays reasonable results with CONFIG_IPV6={n,m,y} Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-31 09:05:48 -06:00
seq_printf(seq,
"%5d: %08X%08X%08X%08X:%04X %08X%08X%08X%08X:%04X "
net: proc_fs: trivial: print UIDs as unsigned int UIDs are printed in the proc_fs as signed int, whereas they are unsigned int. Signed-off-by: Francesco Fusco <ffusco@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-15 05:42:14 -06:00
"%02X %08X:%08X %02X:%08lX %08X %5u %8d %lu %d %pK %d\n",
net: ipv6: Unify {raw,udp}6_sock_seq_show. udp6_sock_seq_show and raw6_sock_seq_show are identical, except the UDP version displays ports and the raw version displays the protocol. Refactor most of the code in these two functions into a new common ip6_dgram_sock_seq_show function, in preparation for using it to display ICMPv6 sockets as well. Also reduce the indentation in parts of include/net/transp_v6.h to improve readability. Compiles and displays reasonable results with CONFIG_IPV6={n,m,y} Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-31 09:05:48 -06:00
bucket,
src->s6_addr32[0], src->s6_addr32[1],
src->s6_addr32[2], src->s6_addr32[3], srcp,
dest->s6_addr32[0], dest->s6_addr32[1],
dest->s6_addr32[2], dest->s6_addr32[3], destp,
sp->sk_state,
sk_wmem_alloc_get(sp),
sk_rmem_alloc_get(sp),
0, 0L, 0,
from_kuid_munged(seq_user_ns(seq), sock_i_uid(sp)),
0,
sock_i_ino(sp),
atomic_read(&sp->sk_refcnt), sp,
atomic_read(&sp->sk_drops));
}