DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 15:24:08 -07:00
|
|
|
/*
|
2011-12-29 15:09:01 -07:00
|
|
|
* Copyright © 2006-2007 Intel Corporation
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 15:24:08 -07:00
|
|
|
*
|
|
|
|
* Permission is hereby granted, free of charge, to any person obtaining a
|
|
|
|
* copy of this software and associated documentation files (the "Software"),
|
|
|
|
* to deal in the Software without restriction, including without limitation
|
|
|
|
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
|
|
|
|
* and/or sell copies of the Software, and to permit persons to whom the
|
|
|
|
* Software is furnished to do so, subject to the following conditions:
|
|
|
|
*
|
|
|
|
* The above copyright notice and this permission notice (including the next
|
|
|
|
* paragraph) shall be included in all copies or substantial portions of the
|
|
|
|
* Software.
|
|
|
|
*
|
|
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
|
|
|
|
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
|
|
|
|
* DEALINGS IN THE SOFTWARE.
|
|
|
|
*
|
|
|
|
* Authors:
|
|
|
|
* Eric Anholt <eric@anholt.net>
|
|
|
|
*/
|
|
|
|
|
|
|
|
/**
|
|
|
|
* @file SDVO command definitions and structures.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#define SDVO_OUTPUT_FIRST (0)
|
|
|
|
#define SDVO_OUTPUT_TMDS0 (1 << 0)
|
|
|
|
#define SDVO_OUTPUT_RGB0 (1 << 1)
|
|
|
|
#define SDVO_OUTPUT_CVBS0 (1 << 2)
|
|
|
|
#define SDVO_OUTPUT_SVID0 (1 << 3)
|
|
|
|
#define SDVO_OUTPUT_YPRPB0 (1 << 4)
|
|
|
|
#define SDVO_OUTPUT_SCART0 (1 << 5)
|
|
|
|
#define SDVO_OUTPUT_LVDS0 (1 << 6)
|
|
|
|
#define SDVO_OUTPUT_TMDS1 (1 << 8)
|
|
|
|
#define SDVO_OUTPUT_RGB1 (1 << 9)
|
|
|
|
#define SDVO_OUTPUT_CVBS1 (1 << 10)
|
|
|
|
#define SDVO_OUTPUT_SVID1 (1 << 11)
|
|
|
|
#define SDVO_OUTPUT_YPRPB1 (1 << 12)
|
|
|
|
#define SDVO_OUTPUT_SCART1 (1 << 13)
|
|
|
|
#define SDVO_OUTPUT_LVDS1 (1 << 14)
|
|
|
|
#define SDVO_OUTPUT_LAST (14)
|
|
|
|
|
|
|
|
struct intel_sdvo_caps {
|
2011-08-16 13:34:10 -06:00
|
|
|
u8 vendor_id;
|
|
|
|
u8 device_id;
|
|
|
|
u8 device_rev_id;
|
|
|
|
u8 sdvo_version_major;
|
|
|
|
u8 sdvo_version_minor;
|
|
|
|
unsigned int sdvo_inputs_mask:2;
|
|
|
|
unsigned int smooth_scaling:1;
|
|
|
|
unsigned int sharp_scaling:1;
|
|
|
|
unsigned int up_scaling:1;
|
|
|
|
unsigned int down_scaling:1;
|
|
|
|
unsigned int stall_support:1;
|
|
|
|
unsigned int pad:1;
|
|
|
|
u16 output_flags;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 15:24:08 -07:00
|
|
|
} __attribute__((packed));
|
|
|
|
|
|
|
|
/** This matches the EDID DTD structure, more or less */
|
|
|
|
struct intel_sdvo_dtd {
|
2011-08-16 13:34:10 -06:00
|
|
|
struct {
|
|
|
|
u16 clock; /**< pixel clock, in 10kHz units */
|
|
|
|
u8 h_active; /**< lower 8 bits (pixels) */
|
|
|
|
u8 h_blank; /**< lower 8 bits (pixels) */
|
|
|
|
u8 h_high; /**< upper 4 bits each h_active, h_blank */
|
|
|
|
u8 v_active; /**< lower 8 bits (lines) */
|
|
|
|
u8 v_blank; /**< lower 8 bits (lines) */
|
|
|
|
u8 v_high; /**< upper 4 bits each v_active, v_blank */
|
|
|
|
} part1;
|
|
|
|
|
|
|
|
struct {
|
|
|
|
u8 h_sync_off; /**< lower 8 bits, from hblank start */
|
|
|
|
u8 h_sync_width; /**< lower 8 bits (pixels) */
|
|
|
|
/** lower 4 bits each vsync offset, vsync width */
|
|
|
|
u8 v_sync_off_width;
|
|
|
|
/**
|
|
|
|
* 2 high bits of hsync offset, 2 high bits of hsync width,
|
|
|
|
* bits 4-5 of vsync offset, and 2 high bits of vsync width.
|
|
|
|
*/
|
|
|
|
u8 sync_off_width_high;
|
|
|
|
u8 dtd_flags;
|
|
|
|
u8 sdvo_flags;
|
|
|
|
/** bits 6-7 of vsync offset at bits 6-7 */
|
|
|
|
u8 v_sync_off_high;
|
|
|
|
u8 reserved;
|
|
|
|
} part2;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 15:24:08 -07:00
|
|
|
} __attribute__((packed));
|
|
|
|
|
|
|
|
struct intel_sdvo_pixel_clock_range {
|
2011-08-16 13:34:10 -06:00
|
|
|
u16 min; /**< pixel clock, in 10kHz units */
|
|
|
|
u16 max; /**< pixel clock, in 10kHz units */
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 15:24:08 -07:00
|
|
|
} __attribute__((packed));
|
|
|
|
|
|
|
|
struct intel_sdvo_preferred_input_timing_args {
|
2011-08-16 13:34:10 -06:00
|
|
|
u16 clock;
|
|
|
|
u16 width;
|
|
|
|
u16 height;
|
|
|
|
u8 interlace:1;
|
|
|
|
u8 scaled:1;
|
|
|
|
u8 pad:6;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 15:24:08 -07:00
|
|
|
} __attribute__((packed));
|
|
|
|
|
|
|
|
/* I2C registers for SDVO */
|
|
|
|
#define SDVO_I2C_ARG_0 0x07
|
|
|
|
#define SDVO_I2C_ARG_1 0x06
|
|
|
|
#define SDVO_I2C_ARG_2 0x05
|
|
|
|
#define SDVO_I2C_ARG_3 0x04
|
|
|
|
#define SDVO_I2C_ARG_4 0x03
|
|
|
|
#define SDVO_I2C_ARG_5 0x02
|
|
|
|
#define SDVO_I2C_ARG_6 0x01
|
|
|
|
#define SDVO_I2C_ARG_7 0x00
|
|
|
|
#define SDVO_I2C_OPCODE 0x08
|
|
|
|
#define SDVO_I2C_CMD_STATUS 0x09
|
|
|
|
#define SDVO_I2C_RETURN_0 0x0a
|
|
|
|
#define SDVO_I2C_RETURN_1 0x0b
|
|
|
|
#define SDVO_I2C_RETURN_2 0x0c
|
|
|
|
#define SDVO_I2C_RETURN_3 0x0d
|
|
|
|
#define SDVO_I2C_RETURN_4 0x0e
|
|
|
|
#define SDVO_I2C_RETURN_5 0x0f
|
|
|
|
#define SDVO_I2C_RETURN_6 0x10
|
|
|
|
#define SDVO_I2C_RETURN_7 0x11
|
|
|
|
#define SDVO_I2C_VENDOR_BEGIN 0x20
|
|
|
|
|
|
|
|
/* Status results */
|
|
|
|
#define SDVO_CMD_STATUS_POWER_ON 0x0
|
|
|
|
#define SDVO_CMD_STATUS_SUCCESS 0x1
|
|
|
|
#define SDVO_CMD_STATUS_NOTSUPP 0x2
|
|
|
|
#define SDVO_CMD_STATUS_INVALID_ARG 0x3
|
|
|
|
#define SDVO_CMD_STATUS_PENDING 0x4
|
|
|
|
#define SDVO_CMD_STATUS_TARGET_NOT_SPECIFIED 0x5
|
|
|
|
#define SDVO_CMD_STATUS_SCALING_NOT_SUPP 0x6
|
|
|
|
|
|
|
|
/* SDVO commands, argument/result registers */
|
|
|
|
|
|
|
|
#define SDVO_CMD_RESET 0x01
|
|
|
|
|
|
|
|
/** Returns a struct intel_sdvo_caps */
|
|
|
|
#define SDVO_CMD_GET_DEVICE_CAPS 0x02
|
|
|
|
|
|
|
|
#define SDVO_CMD_GET_FIRMWARE_REV 0x86
|
|
|
|
# define SDVO_DEVICE_FIRMWARE_MINOR SDVO_I2C_RETURN_0
|
|
|
|
# define SDVO_DEVICE_FIRMWARE_MAJOR SDVO_I2C_RETURN_1
|
|
|
|
# define SDVO_DEVICE_FIRMWARE_PATCH SDVO_I2C_RETURN_2
|
|
|
|
|
|
|
|
/**
|
|
|
|
* Reports which inputs are trained (managed to sync).
|
|
|
|
*
|
|
|
|
* Devices must have trained within 2 vsyncs of a mode change.
|
|
|
|
*/
|
|
|
|
#define SDVO_CMD_GET_TRAINED_INPUTS 0x03
|
|
|
|
struct intel_sdvo_get_trained_inputs_response {
|
2011-08-16 13:34:10 -06:00
|
|
|
unsigned int input0_trained:1;
|
|
|
|
unsigned int input1_trained:1;
|
|
|
|
unsigned int pad:6;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 15:24:08 -07:00
|
|
|
} __attribute__((packed));
|
|
|
|
|
|
|
|
/** Returns a struct intel_sdvo_output_flags of active outputs. */
|
|
|
|
#define SDVO_CMD_GET_ACTIVE_OUTPUTS 0x04
|
|
|
|
|
|
|
|
/**
|
|
|
|
* Sets the current set of active outputs.
|
|
|
|
*
|
|
|
|
* Takes a struct intel_sdvo_output_flags. Must be preceded by a SET_IN_OUT_MAP
|
|
|
|
* on multi-output devices.
|
|
|
|
*/
|
|
|
|
#define SDVO_CMD_SET_ACTIVE_OUTPUTS 0x05
|
|
|
|
|
|
|
|
/**
|
|
|
|
* Returns the current mapping of SDVO inputs to outputs on the device.
|
|
|
|
*
|
|
|
|
* Returns two struct intel_sdvo_output_flags structures.
|
|
|
|
*/
|
|
|
|
#define SDVO_CMD_GET_IN_OUT_MAP 0x06
|
2009-02-02 16:11:52 -07:00
|
|
|
struct intel_sdvo_in_out_map {
|
2011-08-16 13:34:10 -06:00
|
|
|
u16 in0, in1;
|
2009-02-02 16:11:52 -07:00
|
|
|
};
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 15:24:08 -07:00
|
|
|
|
|
|
|
/**
|
|
|
|
* Sets the current mapping of SDVO inputs to outputs on the device.
|
|
|
|
*
|
|
|
|
* Takes two struct i380_sdvo_output_flags structures.
|
|
|
|
*/
|
|
|
|
#define SDVO_CMD_SET_IN_OUT_MAP 0x07
|
|
|
|
|
|
|
|
/**
|
|
|
|
* Returns a struct intel_sdvo_output_flags of attached displays.
|
|
|
|
*/
|
|
|
|
#define SDVO_CMD_GET_ATTACHED_DISPLAYS 0x0b
|
|
|
|
|
|
|
|
/**
|
|
|
|
* Returns a struct intel_sdvo_ouptut_flags of displays supporting hot plugging.
|
|
|
|
*/
|
|
|
|
#define SDVO_CMD_GET_HOT_PLUG_SUPPORT 0x0c
|
|
|
|
|
|
|
|
/**
|
|
|
|
* Takes a struct intel_sdvo_output_flags.
|
|
|
|
*/
|
|
|
|
#define SDVO_CMD_SET_ACTIVE_HOT_PLUG 0x0d
|
|
|
|
|
|
|
|
/**
|
|
|
|
* Returns a struct intel_sdvo_output_flags of displays with hot plug
|
|
|
|
* interrupts enabled.
|
|
|
|
*/
|
|
|
|
#define SDVO_CMD_GET_ACTIVE_HOT_PLUG 0x0e
|
|
|
|
|
|
|
|
#define SDVO_CMD_GET_INTERRUPT_EVENT_SOURCE 0x0f
|
|
|
|
struct intel_sdvo_get_interrupt_event_source_response {
|
2011-08-16 13:34:10 -06:00
|
|
|
u16 interrupt_status;
|
|
|
|
unsigned int ambient_light_interrupt:1;
|
|
|
|
unsigned int hdmi_audio_encrypt_change:1;
|
|
|
|
unsigned int pad:6;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 15:24:08 -07:00
|
|
|
} __attribute__((packed));
|
|
|
|
|
|
|
|
/**
|
|
|
|
* Selects which input is affected by future input commands.
|
|
|
|
*
|
|
|
|
* Commands affected include SET_INPUT_TIMINGS_PART[12],
|
|
|
|
* GET_INPUT_TIMINGS_PART[12], GET_PREFERRED_INPUT_TIMINGS_PART[12],
|
|
|
|
* GET_INPUT_PIXEL_CLOCK_RANGE, and CREATE_PREFERRED_INPUT_TIMINGS.
|
|
|
|
*/
|
|
|
|
#define SDVO_CMD_SET_TARGET_INPUT 0x10
|
|
|
|
struct intel_sdvo_set_target_input_args {
|
2011-08-16 13:34:10 -06:00
|
|
|
unsigned int target_1:1;
|
|
|
|
unsigned int pad:7;
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 15:24:08 -07:00
|
|
|
} __attribute__((packed));
|
|
|
|
|
|
|
|
/**
|
2011-03-30 19:57:33 -06:00
|
|
|
* Takes a struct intel_sdvo_output_flags of which outputs are targeted by
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 15:24:08 -07:00
|
|
|
* future output commands.
|
|
|
|
*
|
|
|
|
* Affected commands inclue SET_OUTPUT_TIMINGS_PART[12],
|
|
|
|
* GET_OUTPUT_TIMINGS_PART[12], and GET_OUTPUT_PIXEL_CLOCK_RANGE.
|
|
|
|
*/
|
|
|
|
#define SDVO_CMD_SET_TARGET_OUTPUT 0x11
|
|
|
|
|
|
|
|
#define SDVO_CMD_GET_INPUT_TIMINGS_PART1 0x12
|
|
|
|
#define SDVO_CMD_GET_INPUT_TIMINGS_PART2 0x13
|
|
|
|
#define SDVO_CMD_SET_INPUT_TIMINGS_PART1 0x14
|
|
|
|
#define SDVO_CMD_SET_INPUT_TIMINGS_PART2 0x15
|
|
|
|
#define SDVO_CMD_SET_OUTPUT_TIMINGS_PART1 0x16
|
|
|
|
#define SDVO_CMD_SET_OUTPUT_TIMINGS_PART2 0x17
|
|
|
|
#define SDVO_CMD_GET_OUTPUT_TIMINGS_PART1 0x18
|
|
|
|
#define SDVO_CMD_GET_OUTPUT_TIMINGS_PART2 0x19
|
|
|
|
/* Part 1 */
|
|
|
|
# define SDVO_DTD_CLOCK_LOW SDVO_I2C_ARG_0
|
|
|
|
# define SDVO_DTD_CLOCK_HIGH SDVO_I2C_ARG_1
|
|
|
|
# define SDVO_DTD_H_ACTIVE SDVO_I2C_ARG_2
|
|
|
|
# define SDVO_DTD_H_BLANK SDVO_I2C_ARG_3
|
|
|
|
# define SDVO_DTD_H_HIGH SDVO_I2C_ARG_4
|
|
|
|
# define SDVO_DTD_V_ACTIVE SDVO_I2C_ARG_5
|
|
|
|
# define SDVO_DTD_V_BLANK SDVO_I2C_ARG_6
|
|
|
|
# define SDVO_DTD_V_HIGH SDVO_I2C_ARG_7
|
|
|
|
/* Part 2 */
|
|
|
|
# define SDVO_DTD_HSYNC_OFF SDVO_I2C_ARG_0
|
|
|
|
# define SDVO_DTD_HSYNC_WIDTH SDVO_I2C_ARG_1
|
|
|
|
# define SDVO_DTD_VSYNC_OFF_WIDTH SDVO_I2C_ARG_2
|
|
|
|
# define SDVO_DTD_SYNC_OFF_WIDTH_HIGH SDVO_I2C_ARG_3
|
|
|
|
# define SDVO_DTD_DTD_FLAGS SDVO_I2C_ARG_4
|
|
|
|
# define SDVO_DTD_DTD_FLAG_INTERLACED (1 << 7)
|
|
|
|
# define SDVO_DTD_DTD_FLAG_STEREO_MASK (3 << 5)
|
|
|
|
# define SDVO_DTD_DTD_FLAG_INPUT_MASK (3 << 3)
|
|
|
|
# define SDVO_DTD_DTD_FLAG_SYNC_MASK (3 << 1)
|
|
|
|
# define SDVO_DTD_SDVO_FLAS SDVO_I2C_ARG_5
|
|
|
|
# define SDVO_DTD_SDVO_FLAG_STALL (1 << 7)
|
|
|
|
# define SDVO_DTD_SDVO_FLAG_CENTERED (0 << 6)
|
|
|
|
# define SDVO_DTD_SDVO_FLAG_UPPER_LEFT (1 << 6)
|
|
|
|
# define SDVO_DTD_SDVO_FLAG_SCALING_MASK (3 << 4)
|
|
|
|
# define SDVO_DTD_SDVO_FLAG_SCALING_NONE (0 << 4)
|
|
|
|
# define SDVO_DTD_SDVO_FLAG_SCALING_SHARP (1 << 4)
|
|
|
|
# define SDVO_DTD_SDVO_FLAG_SCALING_SMOOTH (2 << 4)
|
|
|
|
# define SDVO_DTD_VSYNC_OFF_HIGH SDVO_I2C_ARG_6
|
|
|
|
|
|
|
|
/**
|
|
|
|
* Generates a DTD based on the given width, height, and flags.
|
|
|
|
*
|
|
|
|
* This will be supported by any device supporting scaling or interlaced
|
|
|
|
* modes.
|
|
|
|
*/
|
|
|
|
#define SDVO_CMD_CREATE_PREFERRED_INPUT_TIMING 0x1a
|
|
|
|
# define SDVO_PREFERRED_INPUT_TIMING_CLOCK_LOW SDVO_I2C_ARG_0
|
|
|
|
# define SDVO_PREFERRED_INPUT_TIMING_CLOCK_HIGH SDVO_I2C_ARG_1
|
|
|
|
# define SDVO_PREFERRED_INPUT_TIMING_WIDTH_LOW SDVO_I2C_ARG_2
|
|
|
|
# define SDVO_PREFERRED_INPUT_TIMING_WIDTH_HIGH SDVO_I2C_ARG_3
|
|
|
|
# define SDVO_PREFERRED_INPUT_TIMING_HEIGHT_LOW SDVO_I2C_ARG_4
|
|
|
|
# define SDVO_PREFERRED_INPUT_TIMING_HEIGHT_HIGH SDVO_I2C_ARG_5
|
|
|
|
# define SDVO_PREFERRED_INPUT_TIMING_FLAGS SDVO_I2C_ARG_6
|
|
|
|
# define SDVO_PREFERRED_INPUT_TIMING_FLAGS_INTERLACED (1 << 0)
|
|
|
|
# define SDVO_PREFERRED_INPUT_TIMING_FLAGS_SCALED (1 << 1)
|
|
|
|
|
|
|
|
#define SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART1 0x1b
|
|
|
|
#define SDVO_CMD_GET_PREFERRED_INPUT_TIMING_PART2 0x1c
|
|
|
|
|
|
|
|
/** Returns a struct intel_sdvo_pixel_clock_range */
|
|
|
|
#define SDVO_CMD_GET_INPUT_PIXEL_CLOCK_RANGE 0x1d
|
|
|
|
/** Returns a struct intel_sdvo_pixel_clock_range */
|
|
|
|
#define SDVO_CMD_GET_OUTPUT_PIXEL_CLOCK_RANGE 0x1e
|
|
|
|
|
|
|
|
/** Returns a byte bitfield containing SDVO_CLOCK_RATE_MULT_* flags */
|
|
|
|
#define SDVO_CMD_GET_SUPPORTED_CLOCK_RATE_MULTS 0x1f
|
|
|
|
|
|
|
|
/** Returns a byte containing a SDVO_CLOCK_RATE_MULT_* flag */
|
|
|
|
#define SDVO_CMD_GET_CLOCK_RATE_MULT 0x20
|
|
|
|
/** Takes a byte containing a SDVO_CLOCK_RATE_MULT_* flag */
|
|
|
|
#define SDVO_CMD_SET_CLOCK_RATE_MULT 0x21
|
|
|
|
# define SDVO_CLOCK_RATE_MULT_1X (1 << 0)
|
|
|
|
# define SDVO_CLOCK_RATE_MULT_2X (1 << 1)
|
|
|
|
# define SDVO_CLOCK_RATE_MULT_4X (1 << 3)
|
|
|
|
|
|
|
|
#define SDVO_CMD_GET_SUPPORTED_TV_FORMATS 0x27
|
2010-08-04 06:50:25 -06:00
|
|
|
/** 6 bytes of bit flags for TV formats shared by all TV format functions */
|
2009-02-02 16:11:52 -07:00
|
|
|
struct intel_sdvo_tv_format {
|
2011-08-16 13:34:10 -06:00
|
|
|
unsigned int ntsc_m:1;
|
|
|
|
unsigned int ntsc_j:1;
|
|
|
|
unsigned int ntsc_443:1;
|
|
|
|
unsigned int pal_b:1;
|
|
|
|
unsigned int pal_d:1;
|
|
|
|
unsigned int pal_g:1;
|
|
|
|
unsigned int pal_h:1;
|
|
|
|
unsigned int pal_i:1;
|
|
|
|
|
|
|
|
unsigned int pal_m:1;
|
|
|
|
unsigned int pal_n:1;
|
|
|
|
unsigned int pal_nc:1;
|
|
|
|
unsigned int pal_60:1;
|
|
|
|
unsigned int secam_b:1;
|
|
|
|
unsigned int secam_d:1;
|
|
|
|
unsigned int secam_g:1;
|
|
|
|
unsigned int secam_k:1;
|
|
|
|
|
|
|
|
unsigned int secam_k1:1;
|
|
|
|
unsigned int secam_l:1;
|
|
|
|
unsigned int secam_60:1;
|
|
|
|
unsigned int hdtv_std_smpte_240m_1080i_59:1;
|
|
|
|
unsigned int hdtv_std_smpte_240m_1080i_60:1;
|
|
|
|
unsigned int hdtv_std_smpte_260m_1080i_59:1;
|
|
|
|
unsigned int hdtv_std_smpte_260m_1080i_60:1;
|
|
|
|
unsigned int hdtv_std_smpte_274m_1080i_50:1;
|
|
|
|
|
|
|
|
unsigned int hdtv_std_smpte_274m_1080i_59:1;
|
|
|
|
unsigned int hdtv_std_smpte_274m_1080i_60:1;
|
|
|
|
unsigned int hdtv_std_smpte_274m_1080p_23:1;
|
|
|
|
unsigned int hdtv_std_smpte_274m_1080p_24:1;
|
|
|
|
unsigned int hdtv_std_smpte_274m_1080p_25:1;
|
|
|
|
unsigned int hdtv_std_smpte_274m_1080p_29:1;
|
|
|
|
unsigned int hdtv_std_smpte_274m_1080p_30:1;
|
|
|
|
unsigned int hdtv_std_smpte_274m_1080p_50:1;
|
|
|
|
|
|
|
|
unsigned int hdtv_std_smpte_274m_1080p_59:1;
|
|
|
|
unsigned int hdtv_std_smpte_274m_1080p_60:1;
|
|
|
|
unsigned int hdtv_std_smpte_295m_1080i_50:1;
|
|
|
|
unsigned int hdtv_std_smpte_295m_1080p_50:1;
|
|
|
|
unsigned int hdtv_std_smpte_296m_720p_59:1;
|
|
|
|
unsigned int hdtv_std_smpte_296m_720p_60:1;
|
|
|
|
unsigned int hdtv_std_smpte_296m_720p_50:1;
|
|
|
|
unsigned int hdtv_std_smpte_293m_480p_59:1;
|
|
|
|
|
|
|
|
unsigned int hdtv_std_smpte_170m_480i_59:1;
|
|
|
|
unsigned int hdtv_std_iturbt601_576i_50:1;
|
|
|
|
unsigned int hdtv_std_iturbt601_576p_50:1;
|
|
|
|
unsigned int hdtv_std_eia_7702a_480i_60:1;
|
|
|
|
unsigned int hdtv_std_eia_7702a_480p_60:1;
|
|
|
|
unsigned int pad:3;
|
2009-02-02 16:11:52 -07:00
|
|
|
} __attribute__((packed));
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 15:24:08 -07:00
|
|
|
|
|
|
|
#define SDVO_CMD_GET_TV_FORMAT 0x28
|
|
|
|
|
|
|
|
#define SDVO_CMD_SET_TV_FORMAT 0x29
|
|
|
|
|
2009-02-02 16:11:52 -07:00
|
|
|
/** Returns the resolutiosn that can be used with the given TV format */
|
|
|
|
#define SDVO_CMD_GET_SDTV_RESOLUTION_SUPPORT 0x83
|
|
|
|
struct intel_sdvo_sdtv_resolution_request {
|
2011-08-16 13:34:10 -06:00
|
|
|
unsigned int ntsc_m:1;
|
|
|
|
unsigned int ntsc_j:1;
|
|
|
|
unsigned int ntsc_443:1;
|
|
|
|
unsigned int pal_b:1;
|
|
|
|
unsigned int pal_d:1;
|
|
|
|
unsigned int pal_g:1;
|
|
|
|
unsigned int pal_h:1;
|
|
|
|
unsigned int pal_i:1;
|
|
|
|
|
|
|
|
unsigned int pal_m:1;
|
|
|
|
unsigned int pal_n:1;
|
|
|
|
unsigned int pal_nc:1;
|
|
|
|
unsigned int pal_60:1;
|
|
|
|
unsigned int secam_b:1;
|
|
|
|
unsigned int secam_d:1;
|
|
|
|
unsigned int secam_g:1;
|
|
|
|
unsigned int secam_k:1;
|
|
|
|
|
|
|
|
unsigned int secam_k1:1;
|
|
|
|
unsigned int secam_l:1;
|
|
|
|
unsigned int secam_60:1;
|
|
|
|
unsigned int pad:5;
|
2009-02-02 16:11:52 -07:00
|
|
|
} __attribute__((packed));
|
|
|
|
|
|
|
|
struct intel_sdvo_sdtv_resolution_reply {
|
2011-08-16 13:34:10 -06:00
|
|
|
unsigned int res_320x200:1;
|
|
|
|
unsigned int res_320x240:1;
|
|
|
|
unsigned int res_400x300:1;
|
|
|
|
unsigned int res_640x350:1;
|
|
|
|
unsigned int res_640x400:1;
|
|
|
|
unsigned int res_640x480:1;
|
|
|
|
unsigned int res_704x480:1;
|
|
|
|
unsigned int res_704x576:1;
|
|
|
|
|
|
|
|
unsigned int res_720x350:1;
|
|
|
|
unsigned int res_720x400:1;
|
|
|
|
unsigned int res_720x480:1;
|
|
|
|
unsigned int res_720x540:1;
|
|
|
|
unsigned int res_720x576:1;
|
|
|
|
unsigned int res_768x576:1;
|
|
|
|
unsigned int res_800x600:1;
|
|
|
|
unsigned int res_832x624:1;
|
|
|
|
|
|
|
|
unsigned int res_920x766:1;
|
|
|
|
unsigned int res_1024x768:1;
|
|
|
|
unsigned int res_1280x1024:1;
|
|
|
|
unsigned int pad:5;
|
2009-02-02 16:11:52 -07:00
|
|
|
} __attribute__((packed));
|
|
|
|
|
|
|
|
/* Get supported resolution with squire pixel aspect ratio that can be
|
|
|
|
scaled for the requested HDTV format */
|
|
|
|
#define SDVO_CMD_GET_SCALED_HDTV_RESOLUTION_SUPPORT 0x85
|
|
|
|
|
|
|
|
struct intel_sdvo_hdtv_resolution_request {
|
2011-08-16 13:34:10 -06:00
|
|
|
unsigned int hdtv_std_smpte_240m_1080i_59:1;
|
|
|
|
unsigned int hdtv_std_smpte_240m_1080i_60:1;
|
|
|
|
unsigned int hdtv_std_smpte_260m_1080i_59:1;
|
|
|
|
unsigned int hdtv_std_smpte_260m_1080i_60:1;
|
|
|
|
unsigned int hdtv_std_smpte_274m_1080i_50:1;
|
|
|
|
unsigned int hdtv_std_smpte_274m_1080i_59:1;
|
|
|
|
unsigned int hdtv_std_smpte_274m_1080i_60:1;
|
|
|
|
unsigned int hdtv_std_smpte_274m_1080p_23:1;
|
|
|
|
|
|
|
|
unsigned int hdtv_std_smpte_274m_1080p_24:1;
|
|
|
|
unsigned int hdtv_std_smpte_274m_1080p_25:1;
|
|
|
|
unsigned int hdtv_std_smpte_274m_1080p_29:1;
|
|
|
|
unsigned int hdtv_std_smpte_274m_1080p_30:1;
|
|
|
|
unsigned int hdtv_std_smpte_274m_1080p_50:1;
|
|
|
|
unsigned int hdtv_std_smpte_274m_1080p_59:1;
|
|
|
|
unsigned int hdtv_std_smpte_274m_1080p_60:1;
|
|
|
|
unsigned int hdtv_std_smpte_295m_1080i_50:1;
|
|
|
|
|
|
|
|
unsigned int hdtv_std_smpte_295m_1080p_50:1;
|
|
|
|
unsigned int hdtv_std_smpte_296m_720p_59:1;
|
|
|
|
unsigned int hdtv_std_smpte_296m_720p_60:1;
|
|
|
|
unsigned int hdtv_std_smpte_296m_720p_50:1;
|
|
|
|
unsigned int hdtv_std_smpte_293m_480p_59:1;
|
|
|
|
unsigned int hdtv_std_smpte_170m_480i_59:1;
|
|
|
|
unsigned int hdtv_std_iturbt601_576i_50:1;
|
|
|
|
unsigned int hdtv_std_iturbt601_576p_50:1;
|
|
|
|
|
|
|
|
unsigned int hdtv_std_eia_7702a_480i_60:1;
|
|
|
|
unsigned int hdtv_std_eia_7702a_480p_60:1;
|
|
|
|
unsigned int pad:6;
|
2009-02-02 16:11:52 -07:00
|
|
|
} __attribute__((packed));
|
|
|
|
|
|
|
|
struct intel_sdvo_hdtv_resolution_reply {
|
2011-08-16 13:34:10 -06:00
|
|
|
unsigned int res_640x480:1;
|
|
|
|
unsigned int res_800x600:1;
|
|
|
|
unsigned int res_1024x768:1;
|
|
|
|
unsigned int res_1280x960:1;
|
|
|
|
unsigned int res_1400x1050:1;
|
|
|
|
unsigned int res_1600x1200:1;
|
|
|
|
unsigned int res_1920x1440:1;
|
|
|
|
unsigned int res_2048x1536:1;
|
|
|
|
|
|
|
|
unsigned int res_2560x1920:1;
|
|
|
|
unsigned int res_3200x2400:1;
|
|
|
|
unsigned int res_3840x2880:1;
|
|
|
|
unsigned int pad1:5;
|
|
|
|
|
|
|
|
unsigned int res_848x480:1;
|
|
|
|
unsigned int res_1064x600:1;
|
|
|
|
unsigned int res_1280x720:1;
|
|
|
|
unsigned int res_1360x768:1;
|
|
|
|
unsigned int res_1704x960:1;
|
|
|
|
unsigned int res_1864x1050:1;
|
|
|
|
unsigned int res_1920x1080:1;
|
|
|
|
unsigned int res_2128x1200:1;
|
|
|
|
|
|
|
|
unsigned int res_2560x1400:1;
|
|
|
|
unsigned int res_2728x1536:1;
|
|
|
|
unsigned int res_3408x1920:1;
|
|
|
|
unsigned int res_4264x2400:1;
|
|
|
|
unsigned int res_5120x2880:1;
|
|
|
|
unsigned int pad2:3;
|
|
|
|
|
|
|
|
unsigned int res_768x480:1;
|
|
|
|
unsigned int res_960x600:1;
|
|
|
|
unsigned int res_1152x720:1;
|
|
|
|
unsigned int res_1124x768:1;
|
|
|
|
unsigned int res_1536x960:1;
|
|
|
|
unsigned int res_1680x1050:1;
|
|
|
|
unsigned int res_1728x1080:1;
|
|
|
|
unsigned int res_1920x1200:1;
|
|
|
|
|
|
|
|
unsigned int res_2304x1440:1;
|
|
|
|
unsigned int res_2456x1536:1;
|
|
|
|
unsigned int res_3072x1920:1;
|
|
|
|
unsigned int res_3840x2400:1;
|
|
|
|
unsigned int res_4608x2880:1;
|
|
|
|
unsigned int pad3:3;
|
|
|
|
|
|
|
|
unsigned int res_1280x1024:1;
|
|
|
|
unsigned int pad4:7;
|
|
|
|
|
|
|
|
unsigned int res_1280x768:1;
|
|
|
|
unsigned int pad5:7;
|
2009-02-02 16:11:52 -07:00
|
|
|
} __attribute__((packed));
|
|
|
|
|
|
|
|
/* Get supported power state returns info for encoder and monitor, rely on
|
|
|
|
last SetTargetInput and SetTargetOutput calls */
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 15:24:08 -07:00
|
|
|
#define SDVO_CMD_GET_SUPPORTED_POWER_STATES 0x2a
|
2009-02-02 16:11:52 -07:00
|
|
|
/* Get power state returns info for encoder and monitor, rely on last
|
|
|
|
SetTargetInput and SetTargetOutput calls */
|
|
|
|
#define SDVO_CMD_GET_POWER_STATE 0x2b
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 15:24:08 -07:00
|
|
|
#define SDVO_CMD_GET_ENCODER_POWER_STATE 0x2b
|
|
|
|
#define SDVO_CMD_SET_ENCODER_POWER_STATE 0x2c
|
|
|
|
# define SDVO_ENCODER_STATE_ON (1 << 0)
|
|
|
|
# define SDVO_ENCODER_STATE_STANDBY (1 << 1)
|
|
|
|
# define SDVO_ENCODER_STATE_SUSPEND (1 << 2)
|
|
|
|
# define SDVO_ENCODER_STATE_OFF (1 << 3)
|
2009-02-02 16:11:52 -07:00
|
|
|
# define SDVO_MONITOR_STATE_ON (1 << 4)
|
|
|
|
# define SDVO_MONITOR_STATE_STANDBY (1 << 5)
|
|
|
|
# define SDVO_MONITOR_STATE_SUSPEND (1 << 6)
|
|
|
|
# define SDVO_MONITOR_STATE_OFF (1 << 7)
|
|
|
|
|
|
|
|
#define SDVO_CMD_GET_MAX_PANEL_POWER_SEQUENCING 0x2d
|
|
|
|
#define SDVO_CMD_GET_PANEL_POWER_SEQUENCING 0x2e
|
|
|
|
#define SDVO_CMD_SET_PANEL_POWER_SEQUENCING 0x2f
|
|
|
|
/**
|
|
|
|
* The panel power sequencing parameters are in units of milliseconds.
|
|
|
|
* The high fields are bits 8:9 of the 10-bit values.
|
|
|
|
*/
|
|
|
|
struct sdvo_panel_power_sequencing {
|
2011-08-16 13:34:10 -06:00
|
|
|
u8 t0;
|
|
|
|
u8 t1;
|
|
|
|
u8 t2;
|
|
|
|
u8 t3;
|
|
|
|
u8 t4;
|
|
|
|
|
|
|
|
unsigned int t0_high:2;
|
|
|
|
unsigned int t1_high:2;
|
|
|
|
unsigned int t2_high:2;
|
|
|
|
unsigned int t3_high:2;
|
|
|
|
|
|
|
|
unsigned int t4_high:2;
|
|
|
|
unsigned int pad:6;
|
2009-02-02 16:11:52 -07:00
|
|
|
} __attribute__((packed));
|
|
|
|
|
|
|
|
#define SDVO_CMD_GET_MAX_BACKLIGHT_LEVEL 0x30
|
|
|
|
struct sdvo_max_backlight_reply {
|
2011-08-16 13:34:10 -06:00
|
|
|
u8 max_value;
|
|
|
|
u8 default_value;
|
2009-02-02 16:11:52 -07:00
|
|
|
} __attribute__((packed));
|
|
|
|
|
|
|
|
#define SDVO_CMD_GET_BACKLIGHT_LEVEL 0x31
|
|
|
|
#define SDVO_CMD_SET_BACKLIGHT_LEVEL 0x32
|
|
|
|
|
|
|
|
#define SDVO_CMD_GET_AMBIENT_LIGHT 0x33
|
|
|
|
struct sdvo_get_ambient_light_reply {
|
2011-08-16 13:34:10 -06:00
|
|
|
u16 trip_low;
|
|
|
|
u16 trip_high;
|
|
|
|
u16 value;
|
2009-02-02 16:11:52 -07:00
|
|
|
} __attribute__((packed));
|
|
|
|
#define SDVO_CMD_SET_AMBIENT_LIGHT 0x34
|
|
|
|
struct sdvo_set_ambient_light_reply {
|
2011-08-16 13:34:10 -06:00
|
|
|
u16 trip_low;
|
|
|
|
u16 trip_high;
|
|
|
|
unsigned int enable:1;
|
|
|
|
unsigned int pad:7;
|
2009-02-02 16:11:52 -07:00
|
|
|
} __attribute__((packed));
|
|
|
|
|
|
|
|
/* Set display power state */
|
|
|
|
#define SDVO_CMD_SET_DISPLAY_POWER_STATE 0x7d
|
|
|
|
# define SDVO_DISPLAY_STATE_ON (1 << 0)
|
|
|
|
# define SDVO_DISPLAY_STATE_STANDBY (1 << 1)
|
|
|
|
# define SDVO_DISPLAY_STATE_SUSPEND (1 << 2)
|
|
|
|
# define SDVO_DISPLAY_STATE_OFF (1 << 3)
|
|
|
|
|
|
|
|
#define SDVO_CMD_GET_SUPPORTED_ENHANCEMENTS 0x84
|
|
|
|
struct intel_sdvo_enhancements_reply {
|
2011-08-16 13:34:10 -06:00
|
|
|
unsigned int flicker_filter:1;
|
|
|
|
unsigned int flicker_filter_adaptive:1;
|
|
|
|
unsigned int flicker_filter_2d:1;
|
|
|
|
unsigned int saturation:1;
|
|
|
|
unsigned int hue:1;
|
|
|
|
unsigned int brightness:1;
|
|
|
|
unsigned int contrast:1;
|
|
|
|
unsigned int overscan_h:1;
|
|
|
|
|
|
|
|
unsigned int overscan_v:1;
|
|
|
|
unsigned int hpos:1;
|
|
|
|
unsigned int vpos:1;
|
|
|
|
unsigned int sharpness:1;
|
|
|
|
unsigned int dot_crawl:1;
|
|
|
|
unsigned int dither:1;
|
|
|
|
unsigned int tv_chroma_filter:1;
|
|
|
|
unsigned int tv_luma_filter:1;
|
2009-02-02 16:11:52 -07:00
|
|
|
} __attribute__((packed));
|
|
|
|
|
|
|
|
/* Picture enhancement limits below are dependent on the current TV format,
|
|
|
|
* and thus need to be queried and set after it.
|
|
|
|
*/
|
2010-08-04 06:50:28 -06:00
|
|
|
#define SDVO_CMD_GET_MAX_FLICKER_FILTER 0x4d
|
|
|
|
#define SDVO_CMD_GET_MAX_FLICKER_FILTER_ADAPTIVE 0x7b
|
|
|
|
#define SDVO_CMD_GET_MAX_FLICKER_FILTER_2D 0x52
|
2009-02-02 16:11:52 -07:00
|
|
|
#define SDVO_CMD_GET_MAX_SATURATION 0x55
|
|
|
|
#define SDVO_CMD_GET_MAX_HUE 0x58
|
|
|
|
#define SDVO_CMD_GET_MAX_BRIGHTNESS 0x5b
|
|
|
|
#define SDVO_CMD_GET_MAX_CONTRAST 0x5e
|
|
|
|
#define SDVO_CMD_GET_MAX_OVERSCAN_H 0x61
|
|
|
|
#define SDVO_CMD_GET_MAX_OVERSCAN_V 0x64
|
2010-08-04 06:50:28 -06:00
|
|
|
#define SDVO_CMD_GET_MAX_HPOS 0x67
|
|
|
|
#define SDVO_CMD_GET_MAX_VPOS 0x6a
|
|
|
|
#define SDVO_CMD_GET_MAX_SHARPNESS 0x6d
|
|
|
|
#define SDVO_CMD_GET_MAX_TV_CHROMA_FILTER 0x74
|
|
|
|
#define SDVO_CMD_GET_MAX_TV_LUMA_FILTER 0x77
|
2009-02-02 16:11:52 -07:00
|
|
|
struct intel_sdvo_enhancement_limits_reply {
|
2011-08-16 13:34:10 -06:00
|
|
|
u16 max_value;
|
|
|
|
u16 default_value;
|
2009-02-02 16:11:52 -07:00
|
|
|
} __attribute__((packed));
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 15:24:08 -07:00
|
|
|
|
2009-02-02 16:11:52 -07:00
|
|
|
#define SDVO_CMD_GET_LVDS_PANEL_INFORMATION 0x7f
|
|
|
|
#define SDVO_CMD_SET_LVDS_PANEL_INFORMATION 0x80
|
|
|
|
# define SDVO_LVDS_COLOR_DEPTH_18 (0 << 0)
|
|
|
|
# define SDVO_LVDS_COLOR_DEPTH_24 (1 << 0)
|
|
|
|
# define SDVO_LVDS_CONNECTOR_SPWG (0 << 2)
|
|
|
|
# define SDVO_LVDS_CONNECTOR_OPENLDI (1 << 2)
|
|
|
|
# define SDVO_LVDS_SINGLE_CHANNEL (0 << 4)
|
|
|
|
# define SDVO_LVDS_DUAL_CHANNEL (1 << 4)
|
|
|
|
|
|
|
|
#define SDVO_CMD_GET_FLICKER_FILTER 0x4e
|
|
|
|
#define SDVO_CMD_SET_FLICKER_FILTER 0x4f
|
2010-08-04 06:50:28 -06:00
|
|
|
#define SDVO_CMD_GET_FLICKER_FILTER_ADAPTIVE 0x50
|
|
|
|
#define SDVO_CMD_SET_FLICKER_FILTER_ADAPTIVE 0x51
|
|
|
|
#define SDVO_CMD_GET_FLICKER_FILTER_2D 0x53
|
|
|
|
#define SDVO_CMD_SET_FLICKER_FILTER_2D 0x54
|
2009-02-02 16:11:52 -07:00
|
|
|
#define SDVO_CMD_GET_SATURATION 0x56
|
|
|
|
#define SDVO_CMD_SET_SATURATION 0x57
|
|
|
|
#define SDVO_CMD_GET_HUE 0x59
|
|
|
|
#define SDVO_CMD_SET_HUE 0x5a
|
|
|
|
#define SDVO_CMD_GET_BRIGHTNESS 0x5c
|
|
|
|
#define SDVO_CMD_SET_BRIGHTNESS 0x5d
|
|
|
|
#define SDVO_CMD_GET_CONTRAST 0x5f
|
|
|
|
#define SDVO_CMD_SET_CONTRAST 0x60
|
|
|
|
#define SDVO_CMD_GET_OVERSCAN_H 0x62
|
|
|
|
#define SDVO_CMD_SET_OVERSCAN_H 0x63
|
|
|
|
#define SDVO_CMD_GET_OVERSCAN_V 0x65
|
|
|
|
#define SDVO_CMD_SET_OVERSCAN_V 0x66
|
2010-08-04 06:50:28 -06:00
|
|
|
#define SDVO_CMD_GET_HPOS 0x68
|
|
|
|
#define SDVO_CMD_SET_HPOS 0x69
|
|
|
|
#define SDVO_CMD_GET_VPOS 0x6b
|
|
|
|
#define SDVO_CMD_SET_VPOS 0x6c
|
2009-02-02 16:11:52 -07:00
|
|
|
#define SDVO_CMD_GET_SHARPNESS 0x6e
|
|
|
|
#define SDVO_CMD_SET_SHARPNESS 0x6f
|
2010-08-04 06:50:28 -06:00
|
|
|
#define SDVO_CMD_GET_TV_CHROMA_FILTER 0x75
|
|
|
|
#define SDVO_CMD_SET_TV_CHROMA_FILTER 0x76
|
|
|
|
#define SDVO_CMD_GET_TV_LUMA_FILTER 0x78
|
|
|
|
#define SDVO_CMD_SET_TV_LUMA_FILTER 0x79
|
2009-02-02 16:11:52 -07:00
|
|
|
struct intel_sdvo_enhancements_arg {
|
2011-08-16 13:34:10 -06:00
|
|
|
u16 value;
|
|
|
|
} __attribute__((packed));
|
2009-02-02 16:11:52 -07:00
|
|
|
|
|
|
|
#define SDVO_CMD_GET_DOT_CRAWL 0x70
|
|
|
|
#define SDVO_CMD_SET_DOT_CRAWL 0x71
|
|
|
|
# define SDVO_DOT_CRAWL_ON (1 << 0)
|
|
|
|
# define SDVO_DOT_CRAWL_DEFAULT_ON (1 << 1)
|
|
|
|
|
|
|
|
#define SDVO_CMD_GET_DITHER 0x72
|
|
|
|
#define SDVO_CMD_SET_DITHER 0x73
|
|
|
|
# define SDVO_DITHER_ON (1 << 0)
|
|
|
|
# define SDVO_DITHER_DEFAULT_ON (1 << 1)
|
DRM: i915: add mode setting support
This commit adds i915 driver support for the DRM mode setting APIs.
Currently, VGA, LVDS, SDVO DVI & VGA, TV and DVO LVDS outputs are
supported. HDMI, DisplayPort and additional SDVO output support will
follow.
Support for the mode setting code is controlled by the new 'modeset'
module option. A new config option, CONFIG_DRM_I915_KMS controls the
default behavior, and whether a PCI ID list is built into the module for
use by user level module utilities.
Note that if mode setting is enabled, user level drivers that access
display registers directly or that don't use the kernel graphics memory
manager will likely corrupt kernel graphics memory, disrupt output
configuration (possibly leading to hangs and/or blank displays), and
prevent panic/oops messages from appearing. So use caution when
enabling this code; be sure your user level code supports the new
interfaces.
A new SysRq key, 'g', provides emergency support for switching back to
the kernel's framebuffer console; which is useful for testing.
Co-authors: Dave Airlie <airlied@linux.ie>, Hong Liu <hong.liu@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-11-07 15:24:08 -07:00
|
|
|
|
|
|
|
#define SDVO_CMD_SET_CONTROL_BUS_SWITCH 0x7a
|
2009-02-02 16:11:52 -07:00
|
|
|
# define SDVO_CONTROL_BUS_PROM (1 << 0)
|
|
|
|
# define SDVO_CONTROL_BUS_DDC1 (1 << 1)
|
|
|
|
# define SDVO_CONTROL_BUS_DDC2 (1 << 2)
|
|
|
|
# define SDVO_CONTROL_BUS_DDC3 (1 << 3)
|
|
|
|
|
|
|
|
/* HDMI op codes */
|
|
|
|
#define SDVO_CMD_GET_SUPP_ENCODE 0x9d
|
|
|
|
#define SDVO_CMD_GET_ENCODE 0x9e
|
|
|
|
#define SDVO_CMD_SET_ENCODE 0x9f
|
|
|
|
#define SDVO_ENCODE_DVI 0x0
|
|
|
|
#define SDVO_ENCODE_HDMI 0x1
|
|
|
|
#define SDVO_CMD_SET_PIXEL_REPLI 0x8b
|
|
|
|
#define SDVO_CMD_GET_PIXEL_REPLI 0x8c
|
|
|
|
#define SDVO_CMD_GET_COLORIMETRY_CAP 0x8d
|
|
|
|
#define SDVO_CMD_SET_COLORIMETRY 0x8e
|
|
|
|
#define SDVO_COLORIMETRY_RGB256 0x0
|
|
|
|
#define SDVO_COLORIMETRY_RGB220 0x1
|
|
|
|
#define SDVO_COLORIMETRY_YCrCb422 0x3
|
|
|
|
#define SDVO_COLORIMETRY_YCrCb444 0x4
|
|
|
|
#define SDVO_CMD_GET_COLORIMETRY 0x8f
|
|
|
|
#define SDVO_CMD_GET_AUDIO_ENCRYPT_PREFER 0x90
|
|
|
|
#define SDVO_CMD_SET_AUDIO_STAT 0x91
|
|
|
|
#define SDVO_CMD_GET_AUDIO_STAT 0x92
|
|
|
|
#define SDVO_CMD_SET_HBUF_INDEX 0x93
|
|
|
|
#define SDVO_CMD_GET_HBUF_INDEX 0x94
|
|
|
|
#define SDVO_CMD_GET_HBUF_INFO 0x95
|
|
|
|
#define SDVO_CMD_SET_HBUF_AV_SPLIT 0x96
|
|
|
|
#define SDVO_CMD_GET_HBUF_AV_SPLIT 0x97
|
|
|
|
#define SDVO_CMD_SET_HBUF_DATA 0x98
|
|
|
|
#define SDVO_CMD_GET_HBUF_DATA 0x99
|
|
|
|
#define SDVO_CMD_SET_HBUF_TXRATE 0x9a
|
|
|
|
#define SDVO_CMD_GET_HBUF_TXRATE 0x9b
|
|
|
|
#define SDVO_HBUF_TX_DISABLED (0 << 6)
|
|
|
|
#define SDVO_HBUF_TX_ONCE (2 << 6)
|
|
|
|
#define SDVO_HBUF_TX_VSYNC (3 << 6)
|
|
|
|
#define SDVO_CMD_GET_AUDIO_TX_INFO 0x9c
|
2009-06-29 21:35:35 -06:00
|
|
|
#define SDVO_NEED_TO_STALL (1 << 7)
|
2009-02-02 16:11:52 -07:00
|
|
|
|
2011-08-16 13:34:10 -06:00
|
|
|
struct intel_sdvo_encode {
|
|
|
|
u8 dvi_rev;
|
|
|
|
u8 hdmi_rev;
|
2009-02-02 16:11:52 -07:00
|
|
|
} __attribute__ ((packed));
|