1
0
Fork 0
remarkable-linux/kernel/power/suspend.c

599 lines
15 KiB
C
Raw Normal View History

/*
* kernel/power/suspend.c - Suspend to RAM and standby functionality.
*
* Copyright (c) 2003 Patrick Mochel
* Copyright (c) 2003 Open Source Development Lab
* Copyright (c) 2009 Rafael J. Wysocki <rjw@sisk.pl>, Novell Inc.
*
* This file is released under the GPLv2.
*/
#include <linux/string.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/console.h>
#include <linux/cpu.h>
#include <linux/cpuidle.h>
#include <linux/syscalls.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 02:04:11 -06:00
#include <linux/gfp.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/mm.h>
#include <linux/slab.h>
#include <linux/export.h>
#include <linux/suspend.h>
#include <linux/syscore_ops.h>
#include <linux/ftrace.h>
#include <trace/events/power.h>
#include <linux/compiler.h>
#include <linux/moduleparam.h>
#include "power.h"
PM / sleep: System sleep state selection interface rework There are systems in which the platform doesn't support any special sleep states, so suspend-to-idle (PM_SUSPEND_FREEZE) is the only available system sleep state. However, some user space frameworks only use the "mem" and (sometimes) "standby" sleep state labels, so the users of those systems need to modify user space in order to be able to use system suspend at all and that may be a pain in practice. Commit 0399d4db3edf (PM / sleep: Introduce command line argument for sleep state enumeration) attempted to address this problem by adding a command line argument to change the meaning of the "mem" string in /sys/power/state to make it trigger suspend-to-idle (instead of suspend-to-RAM). However, there also are systems in which the platform does support special sleep states, but suspend-to-idle is the preferred one anyway (it even may save more energy than the platform-provided sleep states in some cases) and the above commit doesn't help in those cases. For this reason, rework the system sleep state selection interface again (but preserve backwards compatibiliby). Namely, add a new sysfs file, /sys/power/mem_sleep, that will control the system suspend mode triggered by writing "mem" to /sys/power/state (in analogy with what /sys/power/disk does for hibernation). Make it select suspend-to-RAM ("deep" sleep) by default (if supported) and fall back to suspend-to-idle ("s2idle") otherwise and add a new command line argument, mem_sleep_default, allowing that default to be overridden if need be. At the same time, drop the relative_sleep_states command line argument that doesn't make sense any more. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mario Limonciello <mario.limonciello@dell.com>
2016-11-21 14:45:40 -07:00
const char * const pm_labels[] = {
[PM_SUSPEND_FREEZE] = "freeze",
[PM_SUSPEND_STANDBY] = "standby",
[PM_SUSPEND_MEM] = "mem",
};
const char *pm_states[PM_SUSPEND_MAX];
PM / sleep: System sleep state selection interface rework There are systems in which the platform doesn't support any special sleep states, so suspend-to-idle (PM_SUSPEND_FREEZE) is the only available system sleep state. However, some user space frameworks only use the "mem" and (sometimes) "standby" sleep state labels, so the users of those systems need to modify user space in order to be able to use system suspend at all and that may be a pain in practice. Commit 0399d4db3edf (PM / sleep: Introduce command line argument for sleep state enumeration) attempted to address this problem by adding a command line argument to change the meaning of the "mem" string in /sys/power/state to make it trigger suspend-to-idle (instead of suspend-to-RAM). However, there also are systems in which the platform does support special sleep states, but suspend-to-idle is the preferred one anyway (it even may save more energy than the platform-provided sleep states in some cases) and the above commit doesn't help in those cases. For this reason, rework the system sleep state selection interface again (but preserve backwards compatibiliby). Namely, add a new sysfs file, /sys/power/mem_sleep, that will control the system suspend mode triggered by writing "mem" to /sys/power/state (in analogy with what /sys/power/disk does for hibernation). Make it select suspend-to-RAM ("deep" sleep) by default (if supported) and fall back to suspend-to-idle ("s2idle") otherwise and add a new command line argument, mem_sleep_default, allowing that default to be overridden if need be. At the same time, drop the relative_sleep_states command line argument that doesn't make sense any more. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mario Limonciello <mario.limonciello@dell.com>
2016-11-21 14:45:40 -07:00
static const char * const mem_sleep_labels[] = {
[PM_SUSPEND_FREEZE] = "s2idle",
[PM_SUSPEND_STANDBY] = "shallow",
[PM_SUSPEND_MEM] = "deep",
};
const char *mem_sleep_states[PM_SUSPEND_MAX];
suspend_state_t mem_sleep_current = PM_SUSPEND_FREEZE;
static suspend_state_t mem_sleep_default = PM_SUSPEND_MEM;
suspend_state_t pm_suspend_target_state;
EXPORT_SYMBOL_GPL(pm_suspend_target_state);
unsigned int pm_suspend_global_flags;
EXPORT_SYMBOL_GPL(pm_suspend_global_flags);
static const struct platform_suspend_ops *suspend_ops;
static const struct platform_freeze_ops *freeze_ops;
PM: Introduce suspend state PM_SUSPEND_FREEZE PM_SUSPEND_FREEZE state is a general state that does not need any platform specific support, it equals frozen processes + suspended devices + idle processors. Compared with PM_SUSPEND_MEMORY, PM_SUSPEND_FREEZE saves less power because the system is still in a running state. PM_SUSPEND_FREEZE has less resume latency because it does not touch BIOS, and the processors are in idle state. Compared with RTPM/idle, PM_SUSPEND_FREEZE saves more power as 1. the processor has longer sleep time because processes are frozen. The deeper c-state the processor supports, more power saving we can get. 2. PM_SUSPEND_FREEZE uses system suspend code path, thus we can get more power saving from the devices that does not have good RTPM support. This state is useful for 1) platforms that do not have STR, or have a broken STR. 2) platforms that have an extremely low power idle state, which can be used to replace STR. The following describes how PM_SUSPEND_FREEZE state works. 1. echo freeze > /sys/power/state 2. the processes are frozen. 3. all the devices are suspended. 4. all the processors are blocked by a wait queue 5. all the processors idles and enters (Deep) c-state. 6. an interrupt fires. 7. a processor is woken up and handles the irq. 8. if it is a general event, a) the irq handler runs and quites. b) goto step 4. 9. if it is a real wake event, say, power button pressing, keyboard touch, mouse moving, a) the irq handler runs and activate the wakeup source b) wakeup_source_activate() notifies the wait queue. c) system starts resuming from PM_SUSPEND_FREEZE 10. all the devices are resumed. 11. all the processes are unfrozen. 12. system is back to working. Known Issue: The wakeup of this new PM_SUSPEND_FREEZE state may behave differently from the previous suspend state. Take ACPI platform for example, there are some GPEs that only enabled when the system is in sleep state, to wake the system backk from S3/S4. But we are not touching these GPEs during transition to PM_SUSPEND_FREEZE. This means we may lose some wake event. But on the other hand, as we do not disable all the Interrupts during PM_SUSPEND_FREEZE, we may get some extra "wakeup" Interrupts, that are not available for S3/S4. The patches has been tested on an old Sony laptop, and here are the results: Average Power: 1. RPTM/idle for half an hour: 14.8W, 12.6W, 14.1W, 12.5W, 14.4W, 13.2W, 12.9W 2. Freeze for half an hour: 11W, 10.4W, 9.4W, 11.3W 10.5W 3. RTPM/idle for three hours: 11.6W 4. Freeze for three hours: 10W 5. Suspend to Memory: 0.5~0.9W Average Resume Latency: 1. RTPM/idle with a black screen: (From pressing keyboard to screen back) Less than 0.2s 2. Freeze: (From pressing power button to screen back) 2.50s 3. Suspend to Memory: (From pressing power button to screen back) 4.33s >From the results, we can see that all the platforms should benefit from this patch, even if it does not have Low Power S0. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-06 05:00:36 -07:00
static DECLARE_WAIT_QUEUE_HEAD(suspend_freeze_wait_head);
enum freeze_state __read_mostly suspend_freeze_state;
static DEFINE_SPINLOCK(suspend_freeze_lock);
PM: Introduce suspend state PM_SUSPEND_FREEZE PM_SUSPEND_FREEZE state is a general state that does not need any platform specific support, it equals frozen processes + suspended devices + idle processors. Compared with PM_SUSPEND_MEMORY, PM_SUSPEND_FREEZE saves less power because the system is still in a running state. PM_SUSPEND_FREEZE has less resume latency because it does not touch BIOS, and the processors are in idle state. Compared with RTPM/idle, PM_SUSPEND_FREEZE saves more power as 1. the processor has longer sleep time because processes are frozen. The deeper c-state the processor supports, more power saving we can get. 2. PM_SUSPEND_FREEZE uses system suspend code path, thus we can get more power saving from the devices that does not have good RTPM support. This state is useful for 1) platforms that do not have STR, or have a broken STR. 2) platforms that have an extremely low power idle state, which can be used to replace STR. The following describes how PM_SUSPEND_FREEZE state works. 1. echo freeze > /sys/power/state 2. the processes are frozen. 3. all the devices are suspended. 4. all the processors are blocked by a wait queue 5. all the processors idles and enters (Deep) c-state. 6. an interrupt fires. 7. a processor is woken up and handles the irq. 8. if it is a general event, a) the irq handler runs and quites. b) goto step 4. 9. if it is a real wake event, say, power button pressing, keyboard touch, mouse moving, a) the irq handler runs and activate the wakeup source b) wakeup_source_activate() notifies the wait queue. c) system starts resuming from PM_SUSPEND_FREEZE 10. all the devices are resumed. 11. all the processes are unfrozen. 12. system is back to working. Known Issue: The wakeup of this new PM_SUSPEND_FREEZE state may behave differently from the previous suspend state. Take ACPI platform for example, there are some GPEs that only enabled when the system is in sleep state, to wake the system backk from S3/S4. But we are not touching these GPEs during transition to PM_SUSPEND_FREEZE. This means we may lose some wake event. But on the other hand, as we do not disable all the Interrupts during PM_SUSPEND_FREEZE, we may get some extra "wakeup" Interrupts, that are not available for S3/S4. The patches has been tested on an old Sony laptop, and here are the results: Average Power: 1. RPTM/idle for half an hour: 14.8W, 12.6W, 14.1W, 12.5W, 14.4W, 13.2W, 12.9W 2. Freeze for half an hour: 11W, 10.4W, 9.4W, 11.3W 10.5W 3. RTPM/idle for three hours: 11.6W 4. Freeze for three hours: 10W 5. Suspend to Memory: 0.5~0.9W Average Resume Latency: 1. RTPM/idle with a black screen: (From pressing keyboard to screen back) Less than 0.2s 2. Freeze: (From pressing power button to screen back) 2.50s 3. Suspend to Memory: (From pressing power button to screen back) 4.33s >From the results, we can see that all the platforms should benefit from this patch, even if it does not have Low Power S0. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-06 05:00:36 -07:00
void freeze_set_ops(const struct platform_freeze_ops *ops)
{
lock_system_sleep();
freeze_ops = ops;
unlock_system_sleep();
}
PM: Introduce suspend state PM_SUSPEND_FREEZE PM_SUSPEND_FREEZE state is a general state that does not need any platform specific support, it equals frozen processes + suspended devices + idle processors. Compared with PM_SUSPEND_MEMORY, PM_SUSPEND_FREEZE saves less power because the system is still in a running state. PM_SUSPEND_FREEZE has less resume latency because it does not touch BIOS, and the processors are in idle state. Compared with RTPM/idle, PM_SUSPEND_FREEZE saves more power as 1. the processor has longer sleep time because processes are frozen. The deeper c-state the processor supports, more power saving we can get. 2. PM_SUSPEND_FREEZE uses system suspend code path, thus we can get more power saving from the devices that does not have good RTPM support. This state is useful for 1) platforms that do not have STR, or have a broken STR. 2) platforms that have an extremely low power idle state, which can be used to replace STR. The following describes how PM_SUSPEND_FREEZE state works. 1. echo freeze > /sys/power/state 2. the processes are frozen. 3. all the devices are suspended. 4. all the processors are blocked by a wait queue 5. all the processors idles and enters (Deep) c-state. 6. an interrupt fires. 7. a processor is woken up and handles the irq. 8. if it is a general event, a) the irq handler runs and quites. b) goto step 4. 9. if it is a real wake event, say, power button pressing, keyboard touch, mouse moving, a) the irq handler runs and activate the wakeup source b) wakeup_source_activate() notifies the wait queue. c) system starts resuming from PM_SUSPEND_FREEZE 10. all the devices are resumed. 11. all the processes are unfrozen. 12. system is back to working. Known Issue: The wakeup of this new PM_SUSPEND_FREEZE state may behave differently from the previous suspend state. Take ACPI platform for example, there are some GPEs that only enabled when the system is in sleep state, to wake the system backk from S3/S4. But we are not touching these GPEs during transition to PM_SUSPEND_FREEZE. This means we may lose some wake event. But on the other hand, as we do not disable all the Interrupts during PM_SUSPEND_FREEZE, we may get some extra "wakeup" Interrupts, that are not available for S3/S4. The patches has been tested on an old Sony laptop, and here are the results: Average Power: 1. RPTM/idle for half an hour: 14.8W, 12.6W, 14.1W, 12.5W, 14.4W, 13.2W, 12.9W 2. Freeze for half an hour: 11W, 10.4W, 9.4W, 11.3W 10.5W 3. RTPM/idle for three hours: 11.6W 4. Freeze for three hours: 10W 5. Suspend to Memory: 0.5~0.9W Average Resume Latency: 1. RTPM/idle with a black screen: (From pressing keyboard to screen back) Less than 0.2s 2. Freeze: (From pressing power button to screen back) 2.50s 3. Suspend to Memory: (From pressing power button to screen back) 4.33s >From the results, we can see that all the platforms should benefit from this patch, even if it does not have Low Power S0. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-06 05:00:36 -07:00
static void freeze_begin(void)
{
suspend_freeze_state = FREEZE_STATE_NONE;
PM: Introduce suspend state PM_SUSPEND_FREEZE PM_SUSPEND_FREEZE state is a general state that does not need any platform specific support, it equals frozen processes + suspended devices + idle processors. Compared with PM_SUSPEND_MEMORY, PM_SUSPEND_FREEZE saves less power because the system is still in a running state. PM_SUSPEND_FREEZE has less resume latency because it does not touch BIOS, and the processors are in idle state. Compared with RTPM/idle, PM_SUSPEND_FREEZE saves more power as 1. the processor has longer sleep time because processes are frozen. The deeper c-state the processor supports, more power saving we can get. 2. PM_SUSPEND_FREEZE uses system suspend code path, thus we can get more power saving from the devices that does not have good RTPM support. This state is useful for 1) platforms that do not have STR, or have a broken STR. 2) platforms that have an extremely low power idle state, which can be used to replace STR. The following describes how PM_SUSPEND_FREEZE state works. 1. echo freeze > /sys/power/state 2. the processes are frozen. 3. all the devices are suspended. 4. all the processors are blocked by a wait queue 5. all the processors idles and enters (Deep) c-state. 6. an interrupt fires. 7. a processor is woken up and handles the irq. 8. if it is a general event, a) the irq handler runs and quites. b) goto step 4. 9. if it is a real wake event, say, power button pressing, keyboard touch, mouse moving, a) the irq handler runs and activate the wakeup source b) wakeup_source_activate() notifies the wait queue. c) system starts resuming from PM_SUSPEND_FREEZE 10. all the devices are resumed. 11. all the processes are unfrozen. 12. system is back to working. Known Issue: The wakeup of this new PM_SUSPEND_FREEZE state may behave differently from the previous suspend state. Take ACPI platform for example, there are some GPEs that only enabled when the system is in sleep state, to wake the system backk from S3/S4. But we are not touching these GPEs during transition to PM_SUSPEND_FREEZE. This means we may lose some wake event. But on the other hand, as we do not disable all the Interrupts during PM_SUSPEND_FREEZE, we may get some extra "wakeup" Interrupts, that are not available for S3/S4. The patches has been tested on an old Sony laptop, and here are the results: Average Power: 1. RPTM/idle for half an hour: 14.8W, 12.6W, 14.1W, 12.5W, 14.4W, 13.2W, 12.9W 2. Freeze for half an hour: 11W, 10.4W, 9.4W, 11.3W 10.5W 3. RTPM/idle for three hours: 11.6W 4. Freeze for three hours: 10W 5. Suspend to Memory: 0.5~0.9W Average Resume Latency: 1. RTPM/idle with a black screen: (From pressing keyboard to screen back) Less than 0.2s 2. Freeze: (From pressing power button to screen back) 2.50s 3. Suspend to Memory: (From pressing power button to screen back) 4.33s >From the results, we can see that all the platforms should benefit from this patch, even if it does not have Low Power S0. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-06 05:00:36 -07:00
}
static void freeze_enter(void)
{
ACPI / PM: Ignore spurious SCI wakeups from suspend-to-idle The ACPI SCI (System Control Interrupt) is set up as a wakeup IRQ during suspend-to-idle transitions and, consequently, any events signaled through it wake up the system from that state. However, on some systems some of the events signaled via the ACPI SCI while suspended to idle should not cause the system to wake up. In fact, quite often they should just be discarded. Arguably, systems should not resume entirely on such events, but in order to decide which events really should cause the system to resume and which are spurious, it is necessary to resume up to the point when ACPI SCIs are actually handled and processed, which is after executing dpm_resume_noirq() in the system resume path. For this reasons, add a loop around freeze_enter() in which the platforms can process events signaled via multiplexed IRQ lines like the ACPI SCI and add suspend-to-idle hooks that can be used for this purpose to struct platform_freeze_ops. In the ACPI case, the ->wake hook is used for checking if the SCI has triggered while suspended and deferring the interrupt-induced system wakeup until the events signaled through it are actually processed sufficiently to decide whether or not the system should resume. In turn, the ->sync hook allows all of the relevant event queues to be flushed so as to prevent events from being missed due to race conditions. In addition to that, some ACPI code processing wakeup events needs to be modified to use the "hard" version of wakeup triggers, so that it will cause a system resume to happen on device-induced wakeup events even if the "soft" mechanism to prevent the system from suspending is not enabled. However, to preserve the existing behavior with respect to suspend-to-RAM, this only is done in the suspend-to-idle case and only if an SCI has occurred while suspended. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-12 14:56:34 -06:00
trace_suspend_resume(TPS("machine_suspend"), PM_SUSPEND_FREEZE, true);
spin_lock_irq(&suspend_freeze_lock);
if (pm_wakeup_pending())
goto out;
suspend_freeze_state = FREEZE_STATE_ENTER;
spin_unlock_irq(&suspend_freeze_lock);
get_online_cpus();
cpuidle_resume();
/* Push all the CPUs into the idle loop. */
wake_up_all_idle_cpus();
/* Make the current CPU wait so it can enter the idle loop too. */
wait_event(suspend_freeze_wait_head,
suspend_freeze_state == FREEZE_STATE_WAKE);
cpuidle_pause();
put_online_cpus();
spin_lock_irq(&suspend_freeze_lock);
out:
suspend_freeze_state = FREEZE_STATE_NONE;
spin_unlock_irq(&suspend_freeze_lock);
ACPI / PM: Ignore spurious SCI wakeups from suspend-to-idle The ACPI SCI (System Control Interrupt) is set up as a wakeup IRQ during suspend-to-idle transitions and, consequently, any events signaled through it wake up the system from that state. However, on some systems some of the events signaled via the ACPI SCI while suspended to idle should not cause the system to wake up. In fact, quite often they should just be discarded. Arguably, systems should not resume entirely on such events, but in order to decide which events really should cause the system to resume and which are spurious, it is necessary to resume up to the point when ACPI SCIs are actually handled and processed, which is after executing dpm_resume_noirq() in the system resume path. For this reasons, add a loop around freeze_enter() in which the platforms can process events signaled via multiplexed IRQ lines like the ACPI SCI and add suspend-to-idle hooks that can be used for this purpose to struct platform_freeze_ops. In the ACPI case, the ->wake hook is used for checking if the SCI has triggered while suspended and deferring the interrupt-induced system wakeup until the events signaled through it are actually processed sufficiently to decide whether or not the system should resume. In turn, the ->sync hook allows all of the relevant event queues to be flushed so as to prevent events from being missed due to race conditions. In addition to that, some ACPI code processing wakeup events needs to be modified to use the "hard" version of wakeup triggers, so that it will cause a system resume to happen on device-induced wakeup events even if the "soft" mechanism to prevent the system from suspending is not enabled. However, to preserve the existing behavior with respect to suspend-to-RAM, this only is done in the suspend-to-idle case and only if an SCI has occurred while suspended. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-12 14:56:34 -06:00
trace_suspend_resume(TPS("machine_suspend"), PM_SUSPEND_FREEZE, false);
}
static void s2idle_loop(void)
{
pm_pr_dbg("suspend-to-idle\n");
ACPI / PM: Ignore spurious SCI wakeups from suspend-to-idle The ACPI SCI (System Control Interrupt) is set up as a wakeup IRQ during suspend-to-idle transitions and, consequently, any events signaled through it wake up the system from that state. However, on some systems some of the events signaled via the ACPI SCI while suspended to idle should not cause the system to wake up. In fact, quite often they should just be discarded. Arguably, systems should not resume entirely on such events, but in order to decide which events really should cause the system to resume and which are spurious, it is necessary to resume up to the point when ACPI SCIs are actually handled and processed, which is after executing dpm_resume_noirq() in the system resume path. For this reasons, add a loop around freeze_enter() in which the platforms can process events signaled via multiplexed IRQ lines like the ACPI SCI and add suspend-to-idle hooks that can be used for this purpose to struct platform_freeze_ops. In the ACPI case, the ->wake hook is used for checking if the SCI has triggered while suspended and deferring the interrupt-induced system wakeup until the events signaled through it are actually processed sufficiently to decide whether or not the system should resume. In turn, the ->sync hook allows all of the relevant event queues to be flushed so as to prevent events from being missed due to race conditions. In addition to that, some ACPI code processing wakeup events needs to be modified to use the "hard" version of wakeup triggers, so that it will cause a system resume to happen on device-induced wakeup events even if the "soft" mechanism to prevent the system from suspending is not enabled. However, to preserve the existing behavior with respect to suspend-to-RAM, this only is done in the suspend-to-idle case and only if an SCI has occurred while suspended. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-12 14:56:34 -06:00
do {
freeze_enter();
if (freeze_ops && freeze_ops->wake)
freeze_ops->wake();
dpm_resume_noirq(PMSG_RESUME);
if (freeze_ops && freeze_ops->sync)
freeze_ops->sync();
if (pm_wakeup_pending())
break;
pm_wakeup_clear(false);
} while (!dpm_suspend_noirq(PMSG_SUSPEND));
pm_pr_dbg("resume from suspend-to-idle\n");
PM: Introduce suspend state PM_SUSPEND_FREEZE PM_SUSPEND_FREEZE state is a general state that does not need any platform specific support, it equals frozen processes + suspended devices + idle processors. Compared with PM_SUSPEND_MEMORY, PM_SUSPEND_FREEZE saves less power because the system is still in a running state. PM_SUSPEND_FREEZE has less resume latency because it does not touch BIOS, and the processors are in idle state. Compared with RTPM/idle, PM_SUSPEND_FREEZE saves more power as 1. the processor has longer sleep time because processes are frozen. The deeper c-state the processor supports, more power saving we can get. 2. PM_SUSPEND_FREEZE uses system suspend code path, thus we can get more power saving from the devices that does not have good RTPM support. This state is useful for 1) platforms that do not have STR, or have a broken STR. 2) platforms that have an extremely low power idle state, which can be used to replace STR. The following describes how PM_SUSPEND_FREEZE state works. 1. echo freeze > /sys/power/state 2. the processes are frozen. 3. all the devices are suspended. 4. all the processors are blocked by a wait queue 5. all the processors idles and enters (Deep) c-state. 6. an interrupt fires. 7. a processor is woken up and handles the irq. 8. if it is a general event, a) the irq handler runs and quites. b) goto step 4. 9. if it is a real wake event, say, power button pressing, keyboard touch, mouse moving, a) the irq handler runs and activate the wakeup source b) wakeup_source_activate() notifies the wait queue. c) system starts resuming from PM_SUSPEND_FREEZE 10. all the devices are resumed. 11. all the processes are unfrozen. 12. system is back to working. Known Issue: The wakeup of this new PM_SUSPEND_FREEZE state may behave differently from the previous suspend state. Take ACPI platform for example, there are some GPEs that only enabled when the system is in sleep state, to wake the system backk from S3/S4. But we are not touching these GPEs during transition to PM_SUSPEND_FREEZE. This means we may lose some wake event. But on the other hand, as we do not disable all the Interrupts during PM_SUSPEND_FREEZE, we may get some extra "wakeup" Interrupts, that are not available for S3/S4. The patches has been tested on an old Sony laptop, and here are the results: Average Power: 1. RPTM/idle for half an hour: 14.8W, 12.6W, 14.1W, 12.5W, 14.4W, 13.2W, 12.9W 2. Freeze for half an hour: 11W, 10.4W, 9.4W, 11.3W 10.5W 3. RTPM/idle for three hours: 11.6W 4. Freeze for three hours: 10W 5. Suspend to Memory: 0.5~0.9W Average Resume Latency: 1. RTPM/idle with a black screen: (From pressing keyboard to screen back) Less than 0.2s 2. Freeze: (From pressing power button to screen back) 2.50s 3. Suspend to Memory: (From pressing power button to screen back) 4.33s >From the results, we can see that all the platforms should benefit from this patch, even if it does not have Low Power S0. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-06 05:00:36 -07:00
}
void freeze_wake(void)
{
unsigned long flags;
spin_lock_irqsave(&suspend_freeze_lock, flags);
if (suspend_freeze_state > FREEZE_STATE_NONE) {
suspend_freeze_state = FREEZE_STATE_WAKE;
wake_up(&suspend_freeze_wait_head);
}
spin_unlock_irqrestore(&suspend_freeze_lock, flags);
PM: Introduce suspend state PM_SUSPEND_FREEZE PM_SUSPEND_FREEZE state is a general state that does not need any platform specific support, it equals frozen processes + suspended devices + idle processors. Compared with PM_SUSPEND_MEMORY, PM_SUSPEND_FREEZE saves less power because the system is still in a running state. PM_SUSPEND_FREEZE has less resume latency because it does not touch BIOS, and the processors are in idle state. Compared with RTPM/idle, PM_SUSPEND_FREEZE saves more power as 1. the processor has longer sleep time because processes are frozen. The deeper c-state the processor supports, more power saving we can get. 2. PM_SUSPEND_FREEZE uses system suspend code path, thus we can get more power saving from the devices that does not have good RTPM support. This state is useful for 1) platforms that do not have STR, or have a broken STR. 2) platforms that have an extremely low power idle state, which can be used to replace STR. The following describes how PM_SUSPEND_FREEZE state works. 1. echo freeze > /sys/power/state 2. the processes are frozen. 3. all the devices are suspended. 4. all the processors are blocked by a wait queue 5. all the processors idles and enters (Deep) c-state. 6. an interrupt fires. 7. a processor is woken up and handles the irq. 8. if it is a general event, a) the irq handler runs and quites. b) goto step 4. 9. if it is a real wake event, say, power button pressing, keyboard touch, mouse moving, a) the irq handler runs and activate the wakeup source b) wakeup_source_activate() notifies the wait queue. c) system starts resuming from PM_SUSPEND_FREEZE 10. all the devices are resumed. 11. all the processes are unfrozen. 12. system is back to working. Known Issue: The wakeup of this new PM_SUSPEND_FREEZE state may behave differently from the previous suspend state. Take ACPI platform for example, there are some GPEs that only enabled when the system is in sleep state, to wake the system backk from S3/S4. But we are not touching these GPEs during transition to PM_SUSPEND_FREEZE. This means we may lose some wake event. But on the other hand, as we do not disable all the Interrupts during PM_SUSPEND_FREEZE, we may get some extra "wakeup" Interrupts, that are not available for S3/S4. The patches has been tested on an old Sony laptop, and here are the results: Average Power: 1. RPTM/idle for half an hour: 14.8W, 12.6W, 14.1W, 12.5W, 14.4W, 13.2W, 12.9W 2. Freeze for half an hour: 11W, 10.4W, 9.4W, 11.3W 10.5W 3. RTPM/idle for three hours: 11.6W 4. Freeze for three hours: 10W 5. Suspend to Memory: 0.5~0.9W Average Resume Latency: 1. RTPM/idle with a black screen: (From pressing keyboard to screen back) Less than 0.2s 2. Freeze: (From pressing power button to screen back) 2.50s 3. Suspend to Memory: (From pressing power button to screen back) 4.33s >From the results, we can see that all the platforms should benefit from this patch, even if it does not have Low Power S0. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-06 05:00:36 -07:00
}
EXPORT_SYMBOL_GPL(freeze_wake);
static bool valid_state(suspend_state_t state)
{
/*
* PM_SUSPEND_STANDBY and PM_SUSPEND_MEM states need low level
* support and need to be valid to the low level
* implementation, no valid callback implies that none are valid.
*/
return suspend_ops && suspend_ops->valid && suspend_ops->valid(state);
}
void __init pm_states_init(void)
{
PM / sleep: System sleep state selection interface rework There are systems in which the platform doesn't support any special sleep states, so suspend-to-idle (PM_SUSPEND_FREEZE) is the only available system sleep state. However, some user space frameworks only use the "mem" and (sometimes) "standby" sleep state labels, so the users of those systems need to modify user space in order to be able to use system suspend at all and that may be a pain in practice. Commit 0399d4db3edf (PM / sleep: Introduce command line argument for sleep state enumeration) attempted to address this problem by adding a command line argument to change the meaning of the "mem" string in /sys/power/state to make it trigger suspend-to-idle (instead of suspend-to-RAM). However, there also are systems in which the platform does support special sleep states, but suspend-to-idle is the preferred one anyway (it even may save more energy than the platform-provided sleep states in some cases) and the above commit doesn't help in those cases. For this reason, rework the system sleep state selection interface again (but preserve backwards compatibiliby). Namely, add a new sysfs file, /sys/power/mem_sleep, that will control the system suspend mode triggered by writing "mem" to /sys/power/state (in analogy with what /sys/power/disk does for hibernation). Make it select suspend-to-RAM ("deep" sleep) by default (if supported) and fall back to suspend-to-idle ("s2idle") otherwise and add a new command line argument, mem_sleep_default, allowing that default to be overridden if need be. At the same time, drop the relative_sleep_states command line argument that doesn't make sense any more. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mario Limonciello <mario.limonciello@dell.com>
2016-11-21 14:45:40 -07:00
/* "mem" and "freeze" are always present in /sys/power/state. */
pm_states[PM_SUSPEND_MEM] = pm_labels[PM_SUSPEND_MEM];
pm_states[PM_SUSPEND_FREEZE] = pm_labels[PM_SUSPEND_FREEZE];
/*
PM / sleep: System sleep state selection interface rework There are systems in which the platform doesn't support any special sleep states, so suspend-to-idle (PM_SUSPEND_FREEZE) is the only available system sleep state. However, some user space frameworks only use the "mem" and (sometimes) "standby" sleep state labels, so the users of those systems need to modify user space in order to be able to use system suspend at all and that may be a pain in practice. Commit 0399d4db3edf (PM / sleep: Introduce command line argument for sleep state enumeration) attempted to address this problem by adding a command line argument to change the meaning of the "mem" string in /sys/power/state to make it trigger suspend-to-idle (instead of suspend-to-RAM). However, there also are systems in which the platform does support special sleep states, but suspend-to-idle is the preferred one anyway (it even may save more energy than the platform-provided sleep states in some cases) and the above commit doesn't help in those cases. For this reason, rework the system sleep state selection interface again (but preserve backwards compatibiliby). Namely, add a new sysfs file, /sys/power/mem_sleep, that will control the system suspend mode triggered by writing "mem" to /sys/power/state (in analogy with what /sys/power/disk does for hibernation). Make it select suspend-to-RAM ("deep" sleep) by default (if supported) and fall back to suspend-to-idle ("s2idle") otherwise and add a new command line argument, mem_sleep_default, allowing that default to be overridden if need be. At the same time, drop the relative_sleep_states command line argument that doesn't make sense any more. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mario Limonciello <mario.limonciello@dell.com>
2016-11-21 14:45:40 -07:00
* Suspend-to-idle should be supported even without any suspend_ops,
* initialize mem_sleep_states[] accordingly here.
*/
PM / sleep: System sleep state selection interface rework There are systems in which the platform doesn't support any special sleep states, so suspend-to-idle (PM_SUSPEND_FREEZE) is the only available system sleep state. However, some user space frameworks only use the "mem" and (sometimes) "standby" sleep state labels, so the users of those systems need to modify user space in order to be able to use system suspend at all and that may be a pain in practice. Commit 0399d4db3edf (PM / sleep: Introduce command line argument for sleep state enumeration) attempted to address this problem by adding a command line argument to change the meaning of the "mem" string in /sys/power/state to make it trigger suspend-to-idle (instead of suspend-to-RAM). However, there also are systems in which the platform does support special sleep states, but suspend-to-idle is the preferred one anyway (it even may save more energy than the platform-provided sleep states in some cases) and the above commit doesn't help in those cases. For this reason, rework the system sleep state selection interface again (but preserve backwards compatibiliby). Namely, add a new sysfs file, /sys/power/mem_sleep, that will control the system suspend mode triggered by writing "mem" to /sys/power/state (in analogy with what /sys/power/disk does for hibernation). Make it select suspend-to-RAM ("deep" sleep) by default (if supported) and fall back to suspend-to-idle ("s2idle") otherwise and add a new command line argument, mem_sleep_default, allowing that default to be overridden if need be. At the same time, drop the relative_sleep_states command line argument that doesn't make sense any more. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mario Limonciello <mario.limonciello@dell.com>
2016-11-21 14:45:40 -07:00
mem_sleep_states[PM_SUSPEND_FREEZE] = mem_sleep_labels[PM_SUSPEND_FREEZE];
}
PM / sleep: System sleep state selection interface rework There are systems in which the platform doesn't support any special sleep states, so suspend-to-idle (PM_SUSPEND_FREEZE) is the only available system sleep state. However, some user space frameworks only use the "mem" and (sometimes) "standby" sleep state labels, so the users of those systems need to modify user space in order to be able to use system suspend at all and that may be a pain in practice. Commit 0399d4db3edf (PM / sleep: Introduce command line argument for sleep state enumeration) attempted to address this problem by adding a command line argument to change the meaning of the "mem" string in /sys/power/state to make it trigger suspend-to-idle (instead of suspend-to-RAM). However, there also are systems in which the platform does support special sleep states, but suspend-to-idle is the preferred one anyway (it even may save more energy than the platform-provided sleep states in some cases) and the above commit doesn't help in those cases. For this reason, rework the system sleep state selection interface again (but preserve backwards compatibiliby). Namely, add a new sysfs file, /sys/power/mem_sleep, that will control the system suspend mode triggered by writing "mem" to /sys/power/state (in analogy with what /sys/power/disk does for hibernation). Make it select suspend-to-RAM ("deep" sleep) by default (if supported) and fall back to suspend-to-idle ("s2idle") otherwise and add a new command line argument, mem_sleep_default, allowing that default to be overridden if need be. At the same time, drop the relative_sleep_states command line argument that doesn't make sense any more. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mario Limonciello <mario.limonciello@dell.com>
2016-11-21 14:45:40 -07:00
static int __init mem_sleep_default_setup(char *str)
{
PM / sleep: System sleep state selection interface rework There are systems in which the platform doesn't support any special sleep states, so suspend-to-idle (PM_SUSPEND_FREEZE) is the only available system sleep state. However, some user space frameworks only use the "mem" and (sometimes) "standby" sleep state labels, so the users of those systems need to modify user space in order to be able to use system suspend at all and that may be a pain in practice. Commit 0399d4db3edf (PM / sleep: Introduce command line argument for sleep state enumeration) attempted to address this problem by adding a command line argument to change the meaning of the "mem" string in /sys/power/state to make it trigger suspend-to-idle (instead of suspend-to-RAM). However, there also are systems in which the platform does support special sleep states, but suspend-to-idle is the preferred one anyway (it even may save more energy than the platform-provided sleep states in some cases) and the above commit doesn't help in those cases. For this reason, rework the system sleep state selection interface again (but preserve backwards compatibiliby). Namely, add a new sysfs file, /sys/power/mem_sleep, that will control the system suspend mode triggered by writing "mem" to /sys/power/state (in analogy with what /sys/power/disk does for hibernation). Make it select suspend-to-RAM ("deep" sleep) by default (if supported) and fall back to suspend-to-idle ("s2idle") otherwise and add a new command line argument, mem_sleep_default, allowing that default to be overridden if need be. At the same time, drop the relative_sleep_states command line argument that doesn't make sense any more. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mario Limonciello <mario.limonciello@dell.com>
2016-11-21 14:45:40 -07:00
suspend_state_t state;
for (state = PM_SUSPEND_FREEZE; state <= PM_SUSPEND_MEM; state++)
if (mem_sleep_labels[state] &&
!strcmp(str, mem_sleep_labels[state])) {
mem_sleep_default = state;
break;
}
return 1;
}
PM / sleep: System sleep state selection interface rework There are systems in which the platform doesn't support any special sleep states, so suspend-to-idle (PM_SUSPEND_FREEZE) is the only available system sleep state. However, some user space frameworks only use the "mem" and (sometimes) "standby" sleep state labels, so the users of those systems need to modify user space in order to be able to use system suspend at all and that may be a pain in practice. Commit 0399d4db3edf (PM / sleep: Introduce command line argument for sleep state enumeration) attempted to address this problem by adding a command line argument to change the meaning of the "mem" string in /sys/power/state to make it trigger suspend-to-idle (instead of suspend-to-RAM). However, there also are systems in which the platform does support special sleep states, but suspend-to-idle is the preferred one anyway (it even may save more energy than the platform-provided sleep states in some cases) and the above commit doesn't help in those cases. For this reason, rework the system sleep state selection interface again (but preserve backwards compatibiliby). Namely, add a new sysfs file, /sys/power/mem_sleep, that will control the system suspend mode triggered by writing "mem" to /sys/power/state (in analogy with what /sys/power/disk does for hibernation). Make it select suspend-to-RAM ("deep" sleep) by default (if supported) and fall back to suspend-to-idle ("s2idle") otherwise and add a new command line argument, mem_sleep_default, allowing that default to be overridden if need be. At the same time, drop the relative_sleep_states command line argument that doesn't make sense any more. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mario Limonciello <mario.limonciello@dell.com>
2016-11-21 14:45:40 -07:00
__setup("mem_sleep_default=", mem_sleep_default_setup);
/**
* suspend_set_ops - Set the global suspend method table.
* @ops: Suspend operations to use.
*/
void suspend_set_ops(const struct platform_suspend_ops *ops)
{
lock_system_sleep();
suspend_ops = ops;
PM / sleep: System sleep state selection interface rework There are systems in which the platform doesn't support any special sleep states, so suspend-to-idle (PM_SUSPEND_FREEZE) is the only available system sleep state. However, some user space frameworks only use the "mem" and (sometimes) "standby" sleep state labels, so the users of those systems need to modify user space in order to be able to use system suspend at all and that may be a pain in practice. Commit 0399d4db3edf (PM / sleep: Introduce command line argument for sleep state enumeration) attempted to address this problem by adding a command line argument to change the meaning of the "mem" string in /sys/power/state to make it trigger suspend-to-idle (instead of suspend-to-RAM). However, there also are systems in which the platform does support special sleep states, but suspend-to-idle is the preferred one anyway (it even may save more energy than the platform-provided sleep states in some cases) and the above commit doesn't help in those cases. For this reason, rework the system sleep state selection interface again (but preserve backwards compatibiliby). Namely, add a new sysfs file, /sys/power/mem_sleep, that will control the system suspend mode triggered by writing "mem" to /sys/power/state (in analogy with what /sys/power/disk does for hibernation). Make it select suspend-to-RAM ("deep" sleep) by default (if supported) and fall back to suspend-to-idle ("s2idle") otherwise and add a new command line argument, mem_sleep_default, allowing that default to be overridden if need be. At the same time, drop the relative_sleep_states command line argument that doesn't make sense any more. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mario Limonciello <mario.limonciello@dell.com>
2016-11-21 14:45:40 -07:00
if (valid_state(PM_SUSPEND_STANDBY)) {
mem_sleep_states[PM_SUSPEND_STANDBY] = mem_sleep_labels[PM_SUSPEND_STANDBY];
pm_states[PM_SUSPEND_STANDBY] = pm_labels[PM_SUSPEND_STANDBY];
if (mem_sleep_default == PM_SUSPEND_STANDBY)
mem_sleep_current = PM_SUSPEND_STANDBY;
}
if (valid_state(PM_SUSPEND_MEM)) {
mem_sleep_states[PM_SUSPEND_MEM] = mem_sleep_labels[PM_SUSPEND_MEM];
if (mem_sleep_default == PM_SUSPEND_MEM)
PM / sleep: System sleep state selection interface rework There are systems in which the platform doesn't support any special sleep states, so suspend-to-idle (PM_SUSPEND_FREEZE) is the only available system sleep state. However, some user space frameworks only use the "mem" and (sometimes) "standby" sleep state labels, so the users of those systems need to modify user space in order to be able to use system suspend at all and that may be a pain in practice. Commit 0399d4db3edf (PM / sleep: Introduce command line argument for sleep state enumeration) attempted to address this problem by adding a command line argument to change the meaning of the "mem" string in /sys/power/state to make it trigger suspend-to-idle (instead of suspend-to-RAM). However, there also are systems in which the platform does support special sleep states, but suspend-to-idle is the preferred one anyway (it even may save more energy than the platform-provided sleep states in some cases) and the above commit doesn't help in those cases. For this reason, rework the system sleep state selection interface again (but preserve backwards compatibiliby). Namely, add a new sysfs file, /sys/power/mem_sleep, that will control the system suspend mode triggered by writing "mem" to /sys/power/state (in analogy with what /sys/power/disk does for hibernation). Make it select suspend-to-RAM ("deep" sleep) by default (if supported) and fall back to suspend-to-idle ("s2idle") otherwise and add a new command line argument, mem_sleep_default, allowing that default to be overridden if need be. At the same time, drop the relative_sleep_states command line argument that doesn't make sense any more. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Mario Limonciello <mario.limonciello@dell.com>
2016-11-21 14:45:40 -07:00
mem_sleep_current = PM_SUSPEND_MEM;
}
unlock_system_sleep();
}
EXPORT_SYMBOL_GPL(suspend_set_ops);
/**
* suspend_valid_only_mem - Generic memory-only valid callback.
*
* Platform drivers that implement mem suspend only and only need to check for
* that in their .valid() callback can use this instead of rolling their own
* .valid() callback.
*/
int suspend_valid_only_mem(suspend_state_t state)
{
return state == PM_SUSPEND_MEM;
}
EXPORT_SYMBOL_GPL(suspend_valid_only_mem);
static bool sleep_state_supported(suspend_state_t state)
{
return state == PM_SUSPEND_FREEZE || (suspend_ops && suspend_ops->enter);
}
static int platform_suspend_prepare(suspend_state_t state)
{
return state != PM_SUSPEND_FREEZE && suspend_ops->prepare ?
suspend_ops->prepare() : 0;
}
static int platform_suspend_prepare_late(suspend_state_t state)
{
return state == PM_SUSPEND_FREEZE && freeze_ops && freeze_ops->prepare ?
freeze_ops->prepare() : 0;
}
static int platform_suspend_prepare_noirq(suspend_state_t state)
{
return state != PM_SUSPEND_FREEZE && suspend_ops->prepare_late ?
suspend_ops->prepare_late() : 0;
}
static void platform_resume_noirq(suspend_state_t state)
{
if (state != PM_SUSPEND_FREEZE && suspend_ops->wake)
suspend_ops->wake();
}
static void platform_resume_early(suspend_state_t state)
{
if (state == PM_SUSPEND_FREEZE && freeze_ops && freeze_ops->restore)
freeze_ops->restore();
}
static void platform_resume_finish(suspend_state_t state)
{
if (state != PM_SUSPEND_FREEZE && suspend_ops->finish)
suspend_ops->finish();
}
static int platform_suspend_begin(suspend_state_t state)
{
if (state == PM_SUSPEND_FREEZE && freeze_ops && freeze_ops->begin)
return freeze_ops->begin();
else if (suspend_ops && suspend_ops->begin)
return suspend_ops->begin(state);
else
return 0;
}
static void platform_resume_end(suspend_state_t state)
{
if (state == PM_SUSPEND_FREEZE && freeze_ops && freeze_ops->end)
freeze_ops->end();
else if (suspend_ops && suspend_ops->end)
suspend_ops->end();
}
static void platform_recover(suspend_state_t state)
{
if (state != PM_SUSPEND_FREEZE && suspend_ops->recover)
suspend_ops->recover();
}
static bool platform_suspend_again(suspend_state_t state)
{
return state != PM_SUSPEND_FREEZE && suspend_ops->suspend_again ?
suspend_ops->suspend_again() : false;
}
#ifdef CONFIG_PM_DEBUG
static unsigned int pm_test_delay = 5;
module_param(pm_test_delay, uint, 0644);
MODULE_PARM_DESC(pm_test_delay,
"Number of seconds to wait before resuming from suspend test");
#endif
static int suspend_test(int level)
{
#ifdef CONFIG_PM_DEBUG
if (pm_test_level == level) {
pr_info("suspend debug: Waiting for %d second(s).\n",
pm_test_delay);
mdelay(pm_test_delay * 1000);
return 1;
}
#endif /* !CONFIG_PM_DEBUG */
return 0;
}
/**
* suspend_prepare - Prepare for entering system sleep state.
*
* Common code run for every system sleep state that can be entered (except for
* hibernation). Run suspend notifiers, allocate the "suspend" console and
* freeze processes.
*/
PM: Introduce suspend state PM_SUSPEND_FREEZE PM_SUSPEND_FREEZE state is a general state that does not need any platform specific support, it equals frozen processes + suspended devices + idle processors. Compared with PM_SUSPEND_MEMORY, PM_SUSPEND_FREEZE saves less power because the system is still in a running state. PM_SUSPEND_FREEZE has less resume latency because it does not touch BIOS, and the processors are in idle state. Compared with RTPM/idle, PM_SUSPEND_FREEZE saves more power as 1. the processor has longer sleep time because processes are frozen. The deeper c-state the processor supports, more power saving we can get. 2. PM_SUSPEND_FREEZE uses system suspend code path, thus we can get more power saving from the devices that does not have good RTPM support. This state is useful for 1) platforms that do not have STR, or have a broken STR. 2) platforms that have an extremely low power idle state, which can be used to replace STR. The following describes how PM_SUSPEND_FREEZE state works. 1. echo freeze > /sys/power/state 2. the processes are frozen. 3. all the devices are suspended. 4. all the processors are blocked by a wait queue 5. all the processors idles and enters (Deep) c-state. 6. an interrupt fires. 7. a processor is woken up and handles the irq. 8. if it is a general event, a) the irq handler runs and quites. b) goto step 4. 9. if it is a real wake event, say, power button pressing, keyboard touch, mouse moving, a) the irq handler runs and activate the wakeup source b) wakeup_source_activate() notifies the wait queue. c) system starts resuming from PM_SUSPEND_FREEZE 10. all the devices are resumed. 11. all the processes are unfrozen. 12. system is back to working. Known Issue: The wakeup of this new PM_SUSPEND_FREEZE state may behave differently from the previous suspend state. Take ACPI platform for example, there are some GPEs that only enabled when the system is in sleep state, to wake the system backk from S3/S4. But we are not touching these GPEs during transition to PM_SUSPEND_FREEZE. This means we may lose some wake event. But on the other hand, as we do not disable all the Interrupts during PM_SUSPEND_FREEZE, we may get some extra "wakeup" Interrupts, that are not available for S3/S4. The patches has been tested on an old Sony laptop, and here are the results: Average Power: 1. RPTM/idle for half an hour: 14.8W, 12.6W, 14.1W, 12.5W, 14.4W, 13.2W, 12.9W 2. Freeze for half an hour: 11W, 10.4W, 9.4W, 11.3W 10.5W 3. RTPM/idle for three hours: 11.6W 4. Freeze for three hours: 10W 5. Suspend to Memory: 0.5~0.9W Average Resume Latency: 1. RTPM/idle with a black screen: (From pressing keyboard to screen back) Less than 0.2s 2. Freeze: (From pressing power button to screen back) 2.50s 3. Suspend to Memory: (From pressing power button to screen back) 4.33s >From the results, we can see that all the platforms should benefit from this patch, even if it does not have Low Power S0. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-06 05:00:36 -07:00
static int suspend_prepare(suspend_state_t state)
{
int error, nr_calls = 0;
if (!sleep_state_supported(state))
return -EPERM;
pm_prepare_console();
error = __pm_notifier_call_chain(PM_SUSPEND_PREPARE, -1, &nr_calls);
if (error) {
nr_calls--;
goto Finish;
}
trace_suspend_resume(TPS("freeze_processes"), 0, true);
error = suspend_freeze_processes();
trace_suspend_resume(TPS("freeze_processes"), 0, false);
if (!error)
return 0;
suspend_stats.failed_freeze++;
dpm_save_failed_step(SUSPEND_FREEZE);
Finish:
__pm_notifier_call_chain(PM_POST_SUSPEND, nr_calls, NULL);
pm_restore_console();
return error;
}
/* default implementation */
void __weak arch_suspend_disable_irqs(void)
{
local_irq_disable();
}
/* default implementation */
void __weak arch_suspend_enable_irqs(void)
{
local_irq_enable();
}
/**
* suspend_enter - Make the system enter the given sleep state.
* @state: System sleep state to enter.
* @wakeup: Returns information that the sleep state should not be re-entered.
*
PM / Suspend: Add .suspend_again() callback to suspend_ops A system or a device may need to control suspend/wakeup events. It may want to wakeup the system after a predefined amount of time or at a predefined event decided while entering suspend for polling or delayed work. Then, it may want to enter suspend again if its predefined wakeup condition is the only wakeup reason and there is no outstanding events; thus, it does not wakeup the userspace unnecessary or unnecessary devices and keeps suspended as long as possible (saving the power). Enabling a system to wakeup after a specified time can be easily achieved by using RTC. However, to enter suspend again immediately without invoking userland and unrelated devices, we need additional features in the suspend framework. Such need comes from: 1. Monitoring a critical device status without interrupts that can wakeup the system. (in-suspend polling) An example is ambient temperature monitoring that needs to shut down the system or a specific device function if it is too hot or cold. The temperature of a specific device may be needed to be monitored as well; e.g., a charger monitors battery temperature in order to stop charging if overheated. 2. Execute critical "delayed work" at suspend. A driver or a system/board may have a delayed work (or any similar things) that it wants to execute at the requested time. For example, some chargers want to check the battery voltage some time (e.g., 30 seconds) after the battery is fully charged and the charger has stopped. Then, the charger restarts charging if the voltage has dropped more than a threshold, which is smaller than "restart-charger" voltage, which is a threshold to restart charging regardless of the time passed. This patch allows to add "suspend_again" callback at struct platform_suspend_ops and let the "suspend_again" callback return true if the system is required to enter suspend again after the current instance of wakeup. Device-wise suspend_again implemented at dev_pm_ops or syscore is not done because: a) suspend_again feature is usually under platform-wise decision and controls the behavior of the whole platform and b) There are very limited devices related to the usage cases of suspend_again; chargers and temperature sensors are mentioned so far. With suspend_again callback registered at struct platform_suspend_ops suspend_ops in kernel/power/suspend.c with suspend_set_ops by the platform, the suspend framework tries to enter suspend again by looping suspend_enter() if suspend_again has returned true and there has been no errors in the suspending sequence or pending wakeups (by pm_wakeup_pending). Tested at Exynos4-NURI. [rjw: Fixed up kerneldoc comment for suspend_enter().] Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-06-12 07:57:05 -06:00
* This function should be called after devices have been suspended.
*/
PM / Suspend: Add .suspend_again() callback to suspend_ops A system or a device may need to control suspend/wakeup events. It may want to wakeup the system after a predefined amount of time or at a predefined event decided while entering suspend for polling or delayed work. Then, it may want to enter suspend again if its predefined wakeup condition is the only wakeup reason and there is no outstanding events; thus, it does not wakeup the userspace unnecessary or unnecessary devices and keeps suspended as long as possible (saving the power). Enabling a system to wakeup after a specified time can be easily achieved by using RTC. However, to enter suspend again immediately without invoking userland and unrelated devices, we need additional features in the suspend framework. Such need comes from: 1. Monitoring a critical device status without interrupts that can wakeup the system. (in-suspend polling) An example is ambient temperature monitoring that needs to shut down the system or a specific device function if it is too hot or cold. The temperature of a specific device may be needed to be monitored as well; e.g., a charger monitors battery temperature in order to stop charging if overheated. 2. Execute critical "delayed work" at suspend. A driver or a system/board may have a delayed work (or any similar things) that it wants to execute at the requested time. For example, some chargers want to check the battery voltage some time (e.g., 30 seconds) after the battery is fully charged and the charger has stopped. Then, the charger restarts charging if the voltage has dropped more than a threshold, which is smaller than "restart-charger" voltage, which is a threshold to restart charging regardless of the time passed. This patch allows to add "suspend_again" callback at struct platform_suspend_ops and let the "suspend_again" callback return true if the system is required to enter suspend again after the current instance of wakeup. Device-wise suspend_again implemented at dev_pm_ops or syscore is not done because: a) suspend_again feature is usually under platform-wise decision and controls the behavior of the whole platform and b) There are very limited devices related to the usage cases of suspend_again; chargers and temperature sensors are mentioned so far. With suspend_again callback registered at struct platform_suspend_ops suspend_ops in kernel/power/suspend.c with suspend_set_ops by the platform, the suspend framework tries to enter suspend again by looping suspend_enter() if suspend_again has returned true and there has been no errors in the suspending sequence or pending wakeups (by pm_wakeup_pending). Tested at Exynos4-NURI. [rjw: Fixed up kerneldoc comment for suspend_enter().] Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-06-12 07:57:05 -06:00
static int suspend_enter(suspend_state_t state, bool *wakeup)
{
int error;
error = platform_suspend_prepare(state);
if (error)
goto Platform_finish;
error = dpm_suspend_late(PMSG_SUSPEND);
if (error) {
pr_err("PM: late suspend of devices failed\n");
goto Platform_finish;
}
error = platform_suspend_prepare_late(state);
if (error)
goto Devices_early_resume;
error = dpm_suspend_noirq(PMSG_SUSPEND);
if (error) {
pr_err("PM: noirq suspend of devices failed\n");
goto Platform_early_resume;
}
error = platform_suspend_prepare_noirq(state);
if (error)
goto Platform_wake;
if (suspend_test(TEST_PLATFORM))
goto Platform_wake;
PM: Introduce suspend state PM_SUSPEND_FREEZE PM_SUSPEND_FREEZE state is a general state that does not need any platform specific support, it equals frozen processes + suspended devices + idle processors. Compared with PM_SUSPEND_MEMORY, PM_SUSPEND_FREEZE saves less power because the system is still in a running state. PM_SUSPEND_FREEZE has less resume latency because it does not touch BIOS, and the processors are in idle state. Compared with RTPM/idle, PM_SUSPEND_FREEZE saves more power as 1. the processor has longer sleep time because processes are frozen. The deeper c-state the processor supports, more power saving we can get. 2. PM_SUSPEND_FREEZE uses system suspend code path, thus we can get more power saving from the devices that does not have good RTPM support. This state is useful for 1) platforms that do not have STR, or have a broken STR. 2) platforms that have an extremely low power idle state, which can be used to replace STR. The following describes how PM_SUSPEND_FREEZE state works. 1. echo freeze > /sys/power/state 2. the processes are frozen. 3. all the devices are suspended. 4. all the processors are blocked by a wait queue 5. all the processors idles and enters (Deep) c-state. 6. an interrupt fires. 7. a processor is woken up and handles the irq. 8. if it is a general event, a) the irq handler runs and quites. b) goto step 4. 9. if it is a real wake event, say, power button pressing, keyboard touch, mouse moving, a) the irq handler runs and activate the wakeup source b) wakeup_source_activate() notifies the wait queue. c) system starts resuming from PM_SUSPEND_FREEZE 10. all the devices are resumed. 11. all the processes are unfrozen. 12. system is back to working. Known Issue: The wakeup of this new PM_SUSPEND_FREEZE state may behave differently from the previous suspend state. Take ACPI platform for example, there are some GPEs that only enabled when the system is in sleep state, to wake the system backk from S3/S4. But we are not touching these GPEs during transition to PM_SUSPEND_FREEZE. This means we may lose some wake event. But on the other hand, as we do not disable all the Interrupts during PM_SUSPEND_FREEZE, we may get some extra "wakeup" Interrupts, that are not available for S3/S4. The patches has been tested on an old Sony laptop, and here are the results: Average Power: 1. RPTM/idle for half an hour: 14.8W, 12.6W, 14.1W, 12.5W, 14.4W, 13.2W, 12.9W 2. Freeze for half an hour: 11W, 10.4W, 9.4W, 11.3W 10.5W 3. RTPM/idle for three hours: 11.6W 4. Freeze for three hours: 10W 5. Suspend to Memory: 0.5~0.9W Average Resume Latency: 1. RTPM/idle with a black screen: (From pressing keyboard to screen back) Less than 0.2s 2. Freeze: (From pressing power button to screen back) 2.50s 3. Suspend to Memory: (From pressing power button to screen back) 4.33s >From the results, we can see that all the platforms should benefit from this patch, even if it does not have Low Power S0. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-06 05:00:36 -07:00
/*
* PM_SUSPEND_FREEZE equals
* frozen processes + suspended devices + idle processors.
* Thus we should invoke freeze_enter() soon after
* all the devices are suspended.
*/
if (state == PM_SUSPEND_FREEZE) {
ACPI / PM: Ignore spurious SCI wakeups from suspend-to-idle The ACPI SCI (System Control Interrupt) is set up as a wakeup IRQ during suspend-to-idle transitions and, consequently, any events signaled through it wake up the system from that state. However, on some systems some of the events signaled via the ACPI SCI while suspended to idle should not cause the system to wake up. In fact, quite often they should just be discarded. Arguably, systems should not resume entirely on such events, but in order to decide which events really should cause the system to resume and which are spurious, it is necessary to resume up to the point when ACPI SCIs are actually handled and processed, which is after executing dpm_resume_noirq() in the system resume path. For this reasons, add a loop around freeze_enter() in which the platforms can process events signaled via multiplexed IRQ lines like the ACPI SCI and add suspend-to-idle hooks that can be used for this purpose to struct platform_freeze_ops. In the ACPI case, the ->wake hook is used for checking if the SCI has triggered while suspended and deferring the interrupt-induced system wakeup until the events signaled through it are actually processed sufficiently to decide whether or not the system should resume. In turn, the ->sync hook allows all of the relevant event queues to be flushed so as to prevent events from being missed due to race conditions. In addition to that, some ACPI code processing wakeup events needs to be modified to use the "hard" version of wakeup triggers, so that it will cause a system resume to happen on device-induced wakeup events even if the "soft" mechanism to prevent the system from suspending is not enabled. However, to preserve the existing behavior with respect to suspend-to-RAM, this only is done in the suspend-to-idle case and only if an SCI has occurred while suspended. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-06-12 14:56:34 -06:00
s2idle_loop();
goto Platform_early_resume;
PM: Introduce suspend state PM_SUSPEND_FREEZE PM_SUSPEND_FREEZE state is a general state that does not need any platform specific support, it equals frozen processes + suspended devices + idle processors. Compared with PM_SUSPEND_MEMORY, PM_SUSPEND_FREEZE saves less power because the system is still in a running state. PM_SUSPEND_FREEZE has less resume latency because it does not touch BIOS, and the processors are in idle state. Compared with RTPM/idle, PM_SUSPEND_FREEZE saves more power as 1. the processor has longer sleep time because processes are frozen. The deeper c-state the processor supports, more power saving we can get. 2. PM_SUSPEND_FREEZE uses system suspend code path, thus we can get more power saving from the devices that does not have good RTPM support. This state is useful for 1) platforms that do not have STR, or have a broken STR. 2) platforms that have an extremely low power idle state, which can be used to replace STR. The following describes how PM_SUSPEND_FREEZE state works. 1. echo freeze > /sys/power/state 2. the processes are frozen. 3. all the devices are suspended. 4. all the processors are blocked by a wait queue 5. all the processors idles and enters (Deep) c-state. 6. an interrupt fires. 7. a processor is woken up and handles the irq. 8. if it is a general event, a) the irq handler runs and quites. b) goto step 4. 9. if it is a real wake event, say, power button pressing, keyboard touch, mouse moving, a) the irq handler runs and activate the wakeup source b) wakeup_source_activate() notifies the wait queue. c) system starts resuming from PM_SUSPEND_FREEZE 10. all the devices are resumed. 11. all the processes are unfrozen. 12. system is back to working. Known Issue: The wakeup of this new PM_SUSPEND_FREEZE state may behave differently from the previous suspend state. Take ACPI platform for example, there are some GPEs that only enabled when the system is in sleep state, to wake the system backk from S3/S4. But we are not touching these GPEs during transition to PM_SUSPEND_FREEZE. This means we may lose some wake event. But on the other hand, as we do not disable all the Interrupts during PM_SUSPEND_FREEZE, we may get some extra "wakeup" Interrupts, that are not available for S3/S4. The patches has been tested on an old Sony laptop, and here are the results: Average Power: 1. RPTM/idle for half an hour: 14.8W, 12.6W, 14.1W, 12.5W, 14.4W, 13.2W, 12.9W 2. Freeze for half an hour: 11W, 10.4W, 9.4W, 11.3W 10.5W 3. RTPM/idle for three hours: 11.6W 4. Freeze for three hours: 10W 5. Suspend to Memory: 0.5~0.9W Average Resume Latency: 1. RTPM/idle with a black screen: (From pressing keyboard to screen back) Less than 0.2s 2. Freeze: (From pressing power button to screen back) 2.50s 3. Suspend to Memory: (From pressing power button to screen back) 4.33s >From the results, we can see that all the platforms should benefit from this patch, even if it does not have Low Power S0. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-06 05:00:36 -07:00
}
error = disable_nonboot_cpus();
if (error || suspend_test(TEST_CPUS))
goto Enable_cpus;
arch_suspend_disable_irqs();
BUG_ON(!irqs_disabled());
error = syscore_suspend();
if (!error) {
PM / Suspend: Add .suspend_again() callback to suspend_ops A system or a device may need to control suspend/wakeup events. It may want to wakeup the system after a predefined amount of time or at a predefined event decided while entering suspend for polling or delayed work. Then, it may want to enter suspend again if its predefined wakeup condition is the only wakeup reason and there is no outstanding events; thus, it does not wakeup the userspace unnecessary or unnecessary devices and keeps suspended as long as possible (saving the power). Enabling a system to wakeup after a specified time can be easily achieved by using RTC. However, to enter suspend again immediately without invoking userland and unrelated devices, we need additional features in the suspend framework. Such need comes from: 1. Monitoring a critical device status without interrupts that can wakeup the system. (in-suspend polling) An example is ambient temperature monitoring that needs to shut down the system or a specific device function if it is too hot or cold. The temperature of a specific device may be needed to be monitored as well; e.g., a charger monitors battery temperature in order to stop charging if overheated. 2. Execute critical "delayed work" at suspend. A driver or a system/board may have a delayed work (or any similar things) that it wants to execute at the requested time. For example, some chargers want to check the battery voltage some time (e.g., 30 seconds) after the battery is fully charged and the charger has stopped. Then, the charger restarts charging if the voltage has dropped more than a threshold, which is smaller than "restart-charger" voltage, which is a threshold to restart charging regardless of the time passed. This patch allows to add "suspend_again" callback at struct platform_suspend_ops and let the "suspend_again" callback return true if the system is required to enter suspend again after the current instance of wakeup. Device-wise suspend_again implemented at dev_pm_ops or syscore is not done because: a) suspend_again feature is usually under platform-wise decision and controls the behavior of the whole platform and b) There are very limited devices related to the usage cases of suspend_again; chargers and temperature sensors are mentioned so far. With suspend_again callback registered at struct platform_suspend_ops suspend_ops in kernel/power/suspend.c with suspend_set_ops by the platform, the suspend framework tries to enter suspend again by looping suspend_enter() if suspend_again has returned true and there has been no errors in the suspending sequence or pending wakeups (by pm_wakeup_pending). Tested at Exynos4-NURI. [rjw: Fixed up kerneldoc comment for suspend_enter().] Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-06-12 07:57:05 -06:00
*wakeup = pm_wakeup_pending();
if (!(suspend_test(TEST_CORE) || *wakeup)) {
trace_suspend_resume(TPS("machine_suspend"),
state, true);
error = suspend_ops->enter(state);
trace_suspend_resume(TPS("machine_suspend"),
state, false);
PM: Make it possible to avoid races between wakeup and system sleep One of the arguments during the suspend blockers discussion was that the mainline kernel didn't contain any mechanisms making it possible to avoid races between wakeup and system suspend. Generally, there are two problems in that area. First, if a wakeup event occurs exactly when /sys/power/state is being written to, it may be delivered to user space right before the freezer kicks in, so the user space consumer of the event may not be able to process it before the system is suspended. Second, if a wakeup event occurs after user space has been frozen, it is not generally guaranteed that the ongoing transition of the system into a sleep state will be aborted. To address these issues introduce a new global sysfs attribute, /sys/power/wakeup_count, associated with a running counter of wakeup events and three helper functions, pm_stay_awake(), pm_relax(), and pm_wakeup_event(), that may be used by kernel subsystems to control the behavior of this attribute and to request the PM core to abort system transitions into a sleep state already in progress. The /sys/power/wakeup_count file may be read from or written to by user space. Reads will always succeed (unless interrupted by a signal) and return the current value of the wakeup events counter. Writes, however, will only succeed if the written number is equal to the current value of the wakeup events counter. If a write is successful, it will cause the kernel to save the current value of the wakeup events counter and to abort the subsequent system transition into a sleep state if any wakeup events are reported after the write has returned. [The assumption is that before writing to /sys/power/state user space will first read from /sys/power/wakeup_count. Next, user space consumers of wakeup events will have a chance to acknowledge or veto the upcoming system transition to a sleep state. Finally, if the transition is allowed to proceed, /sys/power/wakeup_count will be written to and if that succeeds, /sys/power/state will be written to as well. Still, if any wakeup events are reported to the PM core by kernel subsystems after that point, the transition will be aborted.] Additionally, put a wakeup events counter into struct dev_pm_info and make these per-device wakeup event counters available via sysfs, so that it's possible to check the activity of various wakeup event sources within the kernel. To illustrate how subsystems can use pm_wakeup_event(), make the low-level PCI runtime PM wakeup-handling code use it. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: markgross <markgross@thegnar.org> Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
2010-07-05 14:43:53 -06:00
events_check_enabled = false;
} else if (*wakeup) {
error = -EBUSY;
PM: Make it possible to avoid races between wakeup and system sleep One of the arguments during the suspend blockers discussion was that the mainline kernel didn't contain any mechanisms making it possible to avoid races between wakeup and system suspend. Generally, there are two problems in that area. First, if a wakeup event occurs exactly when /sys/power/state is being written to, it may be delivered to user space right before the freezer kicks in, so the user space consumer of the event may not be able to process it before the system is suspended. Second, if a wakeup event occurs after user space has been frozen, it is not generally guaranteed that the ongoing transition of the system into a sleep state will be aborted. To address these issues introduce a new global sysfs attribute, /sys/power/wakeup_count, associated with a running counter of wakeup events and three helper functions, pm_stay_awake(), pm_relax(), and pm_wakeup_event(), that may be used by kernel subsystems to control the behavior of this attribute and to request the PM core to abort system transitions into a sleep state already in progress. The /sys/power/wakeup_count file may be read from or written to by user space. Reads will always succeed (unless interrupted by a signal) and return the current value of the wakeup events counter. Writes, however, will only succeed if the written number is equal to the current value of the wakeup events counter. If a write is successful, it will cause the kernel to save the current value of the wakeup events counter and to abort the subsequent system transition into a sleep state if any wakeup events are reported after the write has returned. [The assumption is that before writing to /sys/power/state user space will first read from /sys/power/wakeup_count. Next, user space consumers of wakeup events will have a chance to acknowledge or veto the upcoming system transition to a sleep state. Finally, if the transition is allowed to proceed, /sys/power/wakeup_count will be written to and if that succeeds, /sys/power/state will be written to as well. Still, if any wakeup events are reported to the PM core by kernel subsystems after that point, the transition will be aborted.] Additionally, put a wakeup events counter into struct dev_pm_info and make these per-device wakeup event counters available via sysfs, so that it's possible to check the activity of various wakeup event sources within the kernel. To illustrate how subsystems can use pm_wakeup_event(), make the low-level PCI runtime PM wakeup-handling code use it. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: markgross <markgross@thegnar.org> Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
2010-07-05 14:43:53 -06:00
}
syscore_resume();
}
arch_suspend_enable_irqs();
BUG_ON(irqs_disabled());
Enable_cpus:
enable_nonboot_cpus();
Platform_wake:
platform_resume_noirq(state);
dpm_resume_noirq(PMSG_RESUME);
Platform_early_resume:
platform_resume_early(state);
Devices_early_resume:
dpm_resume_early(PMSG_RESUME);
Platform_finish:
platform_resume_finish(state);
return error;
}
/**
* suspend_devices_and_enter - Suspend devices and enter system sleep state.
* @state: System sleep state to enter.
*/
int suspend_devices_and_enter(suspend_state_t state)
{
int error;
PM / Suspend: Add .suspend_again() callback to suspend_ops A system or a device may need to control suspend/wakeup events. It may want to wakeup the system after a predefined amount of time or at a predefined event decided while entering suspend for polling or delayed work. Then, it may want to enter suspend again if its predefined wakeup condition is the only wakeup reason and there is no outstanding events; thus, it does not wakeup the userspace unnecessary or unnecessary devices and keeps suspended as long as possible (saving the power). Enabling a system to wakeup after a specified time can be easily achieved by using RTC. However, to enter suspend again immediately without invoking userland and unrelated devices, we need additional features in the suspend framework. Such need comes from: 1. Monitoring a critical device status without interrupts that can wakeup the system. (in-suspend polling) An example is ambient temperature monitoring that needs to shut down the system or a specific device function if it is too hot or cold. The temperature of a specific device may be needed to be monitored as well; e.g., a charger monitors battery temperature in order to stop charging if overheated. 2. Execute critical "delayed work" at suspend. A driver or a system/board may have a delayed work (or any similar things) that it wants to execute at the requested time. For example, some chargers want to check the battery voltage some time (e.g., 30 seconds) after the battery is fully charged and the charger has stopped. Then, the charger restarts charging if the voltage has dropped more than a threshold, which is smaller than "restart-charger" voltage, which is a threshold to restart charging regardless of the time passed. This patch allows to add "suspend_again" callback at struct platform_suspend_ops and let the "suspend_again" callback return true if the system is required to enter suspend again after the current instance of wakeup. Device-wise suspend_again implemented at dev_pm_ops or syscore is not done because: a) suspend_again feature is usually under platform-wise decision and controls the behavior of the whole platform and b) There are very limited devices related to the usage cases of suspend_again; chargers and temperature sensors are mentioned so far. With suspend_again callback registered at struct platform_suspend_ops suspend_ops in kernel/power/suspend.c with suspend_set_ops by the platform, the suspend framework tries to enter suspend again by looping suspend_enter() if suspend_again has returned true and there has been no errors in the suspending sequence or pending wakeups (by pm_wakeup_pending). Tested at Exynos4-NURI. [rjw: Fixed up kerneldoc comment for suspend_enter().] Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-06-12 07:57:05 -06:00
bool wakeup = false;
if (!sleep_state_supported(state))
return -ENOSYS;
pm_suspend_target_state = state;
error = platform_suspend_begin(state);
if (error)
goto Close;
suspend_console();
suspend_test_start();
error = dpm_suspend_start(PMSG_SUSPEND);
if (error) {
pr_err("PM: Some devices failed to suspend, or early wake event detected\n");
goto Recover_platform;
}
suspend_test_finish("suspend devices");
if (suspend_test(TEST_DEVICES))
goto Recover_platform;
PM / Suspend: Add .suspend_again() callback to suspend_ops A system or a device may need to control suspend/wakeup events. It may want to wakeup the system after a predefined amount of time or at a predefined event decided while entering suspend for polling or delayed work. Then, it may want to enter suspend again if its predefined wakeup condition is the only wakeup reason and there is no outstanding events; thus, it does not wakeup the userspace unnecessary or unnecessary devices and keeps suspended as long as possible (saving the power). Enabling a system to wakeup after a specified time can be easily achieved by using RTC. However, to enter suspend again immediately without invoking userland and unrelated devices, we need additional features in the suspend framework. Such need comes from: 1. Monitoring a critical device status without interrupts that can wakeup the system. (in-suspend polling) An example is ambient temperature monitoring that needs to shut down the system or a specific device function if it is too hot or cold. The temperature of a specific device may be needed to be monitored as well; e.g., a charger monitors battery temperature in order to stop charging if overheated. 2. Execute critical "delayed work" at suspend. A driver or a system/board may have a delayed work (or any similar things) that it wants to execute at the requested time. For example, some chargers want to check the battery voltage some time (e.g., 30 seconds) after the battery is fully charged and the charger has stopped. Then, the charger restarts charging if the voltage has dropped more than a threshold, which is smaller than "restart-charger" voltage, which is a threshold to restart charging regardless of the time passed. This patch allows to add "suspend_again" callback at struct platform_suspend_ops and let the "suspend_again" callback return true if the system is required to enter suspend again after the current instance of wakeup. Device-wise suspend_again implemented at dev_pm_ops or syscore is not done because: a) suspend_again feature is usually under platform-wise decision and controls the behavior of the whole platform and b) There are very limited devices related to the usage cases of suspend_again; chargers and temperature sensors are mentioned so far. With suspend_again callback registered at struct platform_suspend_ops suspend_ops in kernel/power/suspend.c with suspend_set_ops by the platform, the suspend framework tries to enter suspend again by looping suspend_enter() if suspend_again has returned true and there has been no errors in the suspending sequence or pending wakeups (by pm_wakeup_pending). Tested at Exynos4-NURI. [rjw: Fixed up kerneldoc comment for suspend_enter().] Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-06-12 07:57:05 -06:00
do {
error = suspend_enter(state, &wakeup);
} while (!error && !wakeup && platform_suspend_again(state));
Resume_devices:
suspend_test_start();
dpm_resume_end(PMSG_RESUME);
suspend_test_finish("resume devices");
trace_suspend_resume(TPS("resume_console"), state, true);
resume_console();
trace_suspend_resume(TPS("resume_console"), state, false);
Close:
platform_resume_end(state);
pm_suspend_target_state = PM_SUSPEND_ON;
return error;
Recover_platform:
platform_recover(state);
goto Resume_devices;
}
/**
* suspend_finish - Clean up before finishing the suspend sequence.
*
* Call platform code to clean up, restart processes, and free the console that
* we've allocated. This routine is not called for hibernation.
*/
static void suspend_finish(void)
{
suspend_thaw_processes();
pm_notifier_call_chain(PM_POST_SUSPEND);
pm_restore_console();
}
/**
* enter_state - Do common work needed to enter system sleep state.
* @state: System sleep state to enter.
*
* Make sure that no one else is trying to put the system into a sleep state.
* Fail if that's not the case. Otherwise, prepare for system suspend, make the
* system enter the given sleep state and clean up after wakeup.
*/
static int enter_state(suspend_state_t state)
{
int error;
trace_suspend_resume(TPS("suspend_enter"), state, true);
if (state == PM_SUSPEND_FREEZE) {
#ifdef CONFIG_PM_DEBUG
if (pm_test_level != TEST_NONE && pm_test_level <= TEST_CPUS) {
pr_warn("PM: Unsupported test mode for suspend to idle, please choose none/freezer/devices/platform.\n");
return -EAGAIN;
}
#endif
} else if (!valid_state(state)) {
return -EINVAL;
}
if (!mutex_trylock(&pm_mutex))
return -EBUSY;
PM: Introduce suspend state PM_SUSPEND_FREEZE PM_SUSPEND_FREEZE state is a general state that does not need any platform specific support, it equals frozen processes + suspended devices + idle processors. Compared with PM_SUSPEND_MEMORY, PM_SUSPEND_FREEZE saves less power because the system is still in a running state. PM_SUSPEND_FREEZE has less resume latency because it does not touch BIOS, and the processors are in idle state. Compared with RTPM/idle, PM_SUSPEND_FREEZE saves more power as 1. the processor has longer sleep time because processes are frozen. The deeper c-state the processor supports, more power saving we can get. 2. PM_SUSPEND_FREEZE uses system suspend code path, thus we can get more power saving from the devices that does not have good RTPM support. This state is useful for 1) platforms that do not have STR, or have a broken STR. 2) platforms that have an extremely low power idle state, which can be used to replace STR. The following describes how PM_SUSPEND_FREEZE state works. 1. echo freeze > /sys/power/state 2. the processes are frozen. 3. all the devices are suspended. 4. all the processors are blocked by a wait queue 5. all the processors idles and enters (Deep) c-state. 6. an interrupt fires. 7. a processor is woken up and handles the irq. 8. if it is a general event, a) the irq handler runs and quites. b) goto step 4. 9. if it is a real wake event, say, power button pressing, keyboard touch, mouse moving, a) the irq handler runs and activate the wakeup source b) wakeup_source_activate() notifies the wait queue. c) system starts resuming from PM_SUSPEND_FREEZE 10. all the devices are resumed. 11. all the processes are unfrozen. 12. system is back to working. Known Issue: The wakeup of this new PM_SUSPEND_FREEZE state may behave differently from the previous suspend state. Take ACPI platform for example, there are some GPEs that only enabled when the system is in sleep state, to wake the system backk from S3/S4. But we are not touching these GPEs during transition to PM_SUSPEND_FREEZE. This means we may lose some wake event. But on the other hand, as we do not disable all the Interrupts during PM_SUSPEND_FREEZE, we may get some extra "wakeup" Interrupts, that are not available for S3/S4. The patches has been tested on an old Sony laptop, and here are the results: Average Power: 1. RPTM/idle for half an hour: 14.8W, 12.6W, 14.1W, 12.5W, 14.4W, 13.2W, 12.9W 2. Freeze for half an hour: 11W, 10.4W, 9.4W, 11.3W 10.5W 3. RTPM/idle for three hours: 11.6W 4. Freeze for three hours: 10W 5. Suspend to Memory: 0.5~0.9W Average Resume Latency: 1. RTPM/idle with a black screen: (From pressing keyboard to screen back) Less than 0.2s 2. Freeze: (From pressing power button to screen back) 2.50s 3. Suspend to Memory: (From pressing power button to screen back) 4.33s >From the results, we can see that all the platforms should benefit from this patch, even if it does not have Low Power S0. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-06 05:00:36 -07:00
if (state == PM_SUSPEND_FREEZE)
freeze_begin();
#ifndef CONFIG_SUSPEND_SKIP_SYNC
trace_suspend_resume(TPS("sync_filesystems"), 0, true);
pr_info("PM: Syncing filesystems ... ");
sys_sync();
pr_cont("done.\n");
trace_suspend_resume(TPS("sync_filesystems"), 0, false);
#endif
pm_pr_dbg("Preparing system for sleep (%s)\n", pm_states[state]);
pm_suspend_clear_flags();
PM: Introduce suspend state PM_SUSPEND_FREEZE PM_SUSPEND_FREEZE state is a general state that does not need any platform specific support, it equals frozen processes + suspended devices + idle processors. Compared with PM_SUSPEND_MEMORY, PM_SUSPEND_FREEZE saves less power because the system is still in a running state. PM_SUSPEND_FREEZE has less resume latency because it does not touch BIOS, and the processors are in idle state. Compared with RTPM/idle, PM_SUSPEND_FREEZE saves more power as 1. the processor has longer sleep time because processes are frozen. The deeper c-state the processor supports, more power saving we can get. 2. PM_SUSPEND_FREEZE uses system suspend code path, thus we can get more power saving from the devices that does not have good RTPM support. This state is useful for 1) platforms that do not have STR, or have a broken STR. 2) platforms that have an extremely low power idle state, which can be used to replace STR. The following describes how PM_SUSPEND_FREEZE state works. 1. echo freeze > /sys/power/state 2. the processes are frozen. 3. all the devices are suspended. 4. all the processors are blocked by a wait queue 5. all the processors idles and enters (Deep) c-state. 6. an interrupt fires. 7. a processor is woken up and handles the irq. 8. if it is a general event, a) the irq handler runs and quites. b) goto step 4. 9. if it is a real wake event, say, power button pressing, keyboard touch, mouse moving, a) the irq handler runs and activate the wakeup source b) wakeup_source_activate() notifies the wait queue. c) system starts resuming from PM_SUSPEND_FREEZE 10. all the devices are resumed. 11. all the processes are unfrozen. 12. system is back to working. Known Issue: The wakeup of this new PM_SUSPEND_FREEZE state may behave differently from the previous suspend state. Take ACPI platform for example, there are some GPEs that only enabled when the system is in sleep state, to wake the system backk from S3/S4. But we are not touching these GPEs during transition to PM_SUSPEND_FREEZE. This means we may lose some wake event. But on the other hand, as we do not disable all the Interrupts during PM_SUSPEND_FREEZE, we may get some extra "wakeup" Interrupts, that are not available for S3/S4. The patches has been tested on an old Sony laptop, and here are the results: Average Power: 1. RPTM/idle for half an hour: 14.8W, 12.6W, 14.1W, 12.5W, 14.4W, 13.2W, 12.9W 2. Freeze for half an hour: 11W, 10.4W, 9.4W, 11.3W 10.5W 3. RTPM/idle for three hours: 11.6W 4. Freeze for three hours: 10W 5. Suspend to Memory: 0.5~0.9W Average Resume Latency: 1. RTPM/idle with a black screen: (From pressing keyboard to screen back) Less than 0.2s 2. Freeze: (From pressing power button to screen back) 2.50s 3. Suspend to Memory: (From pressing power button to screen back) 4.33s >From the results, we can see that all the platforms should benefit from this patch, even if it does not have Low Power S0. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-02-06 05:00:36 -07:00
error = suspend_prepare(state);
if (error)
goto Unlock;
if (suspend_test(TEST_FREEZER))
goto Finish;
trace_suspend_resume(TPS("suspend_enter"), state, false);
pm_pr_dbg("Suspending system (%s)\n", pm_states[state]);
pm_restrict_gfp_mask();
error = suspend_devices_and_enter(state);
pm_restore_gfp_mask();
Finish:
pm_pr_dbg("Finishing wakeup.\n");
suspend_finish();
Unlock:
mutex_unlock(&pm_mutex);
return error;
}
/**
* pm_suspend - Externally visible function for suspending the system.
* @state: System sleep state to enter.
*
* Check if the value of @state represents one of the supported states,
* execute enter_state() and update system suspend statistics.
*/
int pm_suspend(suspend_state_t state)
{
int error;
if (state <= PM_SUSPEND_ON || state >= PM_SUSPEND_MAX)
return -EINVAL;
pr_info("PM: suspend entry (%s)\n", pm_states[state]);
error = enter_state(state);
if (error) {
suspend_stats.fail++;
dpm_save_failed_errno(error);
} else {
suspend_stats.success++;
PM / Suspend: Add statistics debugfs file for suspend to RAM Record S3 failure time about each reason and the latest two failed devices' names in S3 progress. We can check it through 'suspend_stats' entry in debugfs. The motivation of the patch: We are enabling power features on Medfield. Comparing with PC/notebook, a mobile enters/exits suspend-2-ram (we call it s3 on Medfield) far more frequently. If it can't enter suspend-2-ram in time, the power might be used up soon. We often find sometimes, a device suspend fails. Then, system retries s3 over and over again. As display is off, testers and developers don't know what happens. Some testers and developers complain they don't know if system tries suspend-2-ram, and what device fails to suspend. They need such info for a quick check. The patch adds suspend_stats under debugfs for users to check suspend to RAM statistics quickly. If not using this patch, we have other methods to get info about what device fails. One is to turn on CONFIG_PM_DEBUG, but users would get too much info and testers need recompile the system. In addition, dynamic debug is another good tool to dump debug info. But it still doesn't match our utilization scenario closely. 1) user need write a user space parser to process the syslog output; 2) Our testing scenario is we leave the mobile for at least hours. Then, check its status. No serial console available during the testing. One is because console would be suspended, and the other is serial console connecting with spi or HSU devices would consume power. These devices are powered off at suspend-2-ram. Signed-off-by: ShuoX Liu <shuox.liu@intel.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-08-10 15:01:26 -06:00
}
pr_info("PM: suspend exit\n");
return error;
}
EXPORT_SYMBOL(pm_suspend);