1
0
Fork 0
remarkable-linux/drivers/net/ethernet/cavium/liquidio/lio_main.c

4775 lines
123 KiB
C
Raw Normal View History

Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
/**********************************************************************
* Author: Cavium, Inc.
*
* Contact: support@cavium.com
* Please include "LiquidIO" in the subject.
*
* Copyright (c) 2003-2016 Cavium, Inc.
*
* This file is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, Version 2, as
* published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful, but
* AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
* NONINFRINGEMENT. See the GNU General Public License for more details.
***********************************************************************/
net: liquidio: fix build errors when linux/phy*.h is removed from net/dsa.h drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:30: error: expected declaration specifiers or '...' before string constant drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:30: warning: data definition has no type or storage class drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:30: error: type defaults to 'int' in declaration of 'MODULE_AUTHOR' drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:30: error: function declaration isn't a prototype drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:31: error: expected declaration specifiers or '...' before string constant drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:31: warning: data definition has no type or storage class drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:31: error: type defaults to 'int' in declaration of 'MODULE_DESCRIPTION' drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:31: error: function declaration isn't a prototype drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:32: error: expected declaration specifiers or '...' before string constant drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:32: warning: data definition has no type or storage class drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:32: error: type defaults to 'int' in declaration of 'MODULE_LICENSE' drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:32: error: function declaration isn't a prototype drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:33: error: expected declaration specifiers or '...' before string constant drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:33: warning: data definition has no type or storage class drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:33: error: type defaults to 'int' in declaration of 'MODULE_VERSION' drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:33: error: function declaration isn't a prototype drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:36: error: expected ')' before 'int' drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:37: error: expected ')' before string constant drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:325: warning: data definition has no type or storage class drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:325: error: type defaults to 'int' in declaration of 'MODULE_DEVICE_TABLE' drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:325: warning: parameter names (without types) in function declaration drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:3250: warning: data definition has no type or storage class drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:3250: error: type defaults to 'int' in declaration of 'module_init' drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:3250: warning: parameter names (without types) in function declaration drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:3251: warning: data definition has no type or storage class drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:3251: error: type defaults to 'int' in declaration of 'module_exit' drivers/net/ethernet/cavium/liquidio/lio_vf_main.c:3251: warning: parameter names (without types) in function declaration drivers/net/ethernet/cavium/liquidio/lio_main.c:36: error: expected declaration specifiers or '...' before string constant drivers/net/ethernet/cavium/liquidio/lio_main.c:36: warning: data definition has no type or storage class drivers/net/ethernet/cavium/liquidio/lio_main.c:36: error: type defaults to 'int' in declaration of 'MODULE_AUTHOR' drivers/net/ethernet/cavium/liquidio/lio_main.c:36: error: function declaration isn't a prototype drivers/net/ethernet/cavium/liquidio/lio_main.c:37: error: expected declaration specifiers or '...' before string constant drivers/net/ethernet/cavium/liquidio/lio_main.c:37: warning: data definition has no type or storage class drivers/net/ethernet/cavium/liquidio/lio_main.c:37: error: type defaults to 'int' in declaration of 'MODULE_DESCRIPTION' drivers/net/ethernet/cavium/liquidio/lio_main.c:37: error: function declaration isn't a prototype drivers/net/ethernet/cavium/liquidio/lio_main.c:38: error: expected declaration specifiers or '...' before string constant drivers/net/ethernet/cavium/liquidio/lio_main.c:38: warning: data definition has no type or storage class drivers/net/ethernet/cavium/liquidio/lio_main.c:38: error: type defaults to 'int' in declaration of 'MODULE_LICENSE' drivers/net/ethernet/cavium/liquidio/lio_main.c:38: error: function declaration isn't a prototype drivers/net/ethernet/cavium/liquidio/lio_main.c:39: error: expected declaration specifiers or '...' before string constant drivers/net/ethernet/cavium/liquidio/lio_main.c:39: warning: data definition has no type or storage class drivers/net/ethernet/cavium/liquidio/lio_main.c:39: error: type defaults to 'int' in declaration of 'MODULE_VERSION' drivers/net/ethernet/cavium/liquidio/lio_main.c:39: error: function declaration isn't a prototype drivers/net/ethernet/cavium/liquidio/lio_main.c:40: error: expected declaration specifiers or '...' before string constant drivers/net/ethernet/cavium/liquidio/lio_main.c:40: warning: data definition has no type or storage class drivers/net/ethernet/cavium/liquidio/lio_main.c:40: error: type defaults to 'int' in declaration of 'MODULE_FIRMWARE' drivers/net/ethernet/cavium/liquidio/lio_main.c:40: error: function declaration isn't a prototype drivers/net/ethernet/cavium/liquidio/lio_main.c:41: error: expected declaration specifiers or '...' before string constant drivers/net/ethernet/cavium/liquidio/lio_main.c:41: warning: data definition has no type or storage class drivers/net/ethernet/cavium/liquidio/lio_main.c:41: error: type defaults to 'int' in declaration of 'MODULE_FIRMWARE' drivers/net/ethernet/cavium/liquidio/lio_main.c:41: error: function declaration isn't a prototype drivers/net/ethernet/cavium/liquidio/lio_main.c:42: error: expected declaration specifiers or '...' before string constant drivers/net/ethernet/cavium/liquidio/lio_main.c:42: warning: data definition has no type or storage class drivers/net/ethernet/cavium/liquidio/lio_main.c:42: error: type defaults to 'int' in declaration of 'MODULE_FIRMWARE' drivers/net/ethernet/cavium/liquidio/lio_main.c:42: error: function declaration isn't a prototype drivers/net/ethernet/cavium/liquidio/lio_main.c:43: error: expected declaration specifiers or '...' before string constant drivers/net/ethernet/cavium/liquidio/lio_main.c:43: warning: data definition has no type or storage class drivers/net/ethernet/cavium/liquidio/lio_main.c:43: error: type defaults to 'int' in declaration of 'MODULE_FIRMWARE' drivers/net/ethernet/cavium/liquidio/lio_main.c:43: error: function declaration isn't a prototype drivers/net/ethernet/cavium/liquidio/lio_main.c:46: error: expected ')' before 'int' drivers/net/ethernet/cavium/liquidio/lio_main.c:48: error: expected ')' before string constant drivers/net/ethernet/cavium/liquidio/lio_main.c:53: error: expected ')' before 'int' drivers/net/ethernet/cavium/liquidio/lio_main.c:54: error: expected ')' before string constant drivers/net/ethernet/cavium/liquidio/lio_main.c:57: error: expected ')' before 'sizeof' drivers/net/ethernet/cavium/liquidio/lio_main.c:58: error: expected ')' before string constant drivers/net/ethernet/cavium/liquidio/lio_main.c:498: warning: data definitionhas no type or storage class drivers/net/ethernet/cavium/liquidio/lio_main.c:498: error: type defaults to 'int' in declaration of 'MODULE_DEVICE_TABLE' drivers/net/ethernet/cavium/liquidio/lio_main.c:498: warning: parameter names (without types) in function declaration drivers/net/ethernet/cavium/liquidio/lio_main.c: In function 'octeon_recv_vf_drv_notice': drivers/net/ethernet/cavium/liquidio/lio_main.c:4393: error: implicit declaration of function 'try_module_get' drivers/net/ethernet/cavium/liquidio/lio_main.c:4400: error: implicit declaration of function 'module_put' drivers/net/ethernet/cavium/liquidio/lio_main.c: At top level: drivers/net/ethernet/cavium/liquidio/lio_main.c:4670: warning: data definition has no type or storage class drivers/net/ethernet/cavium/liquidio/lio_main.c:4670: error: type defaults to 'int' in declaration of 'module_init' drivers/net/ethernet/cavium/liquidio/lio_main.c:4670: warning: parameter names (without types) in function declaration drivers/net/ethernet/cavium/liquidio/lio_main.c:4671: warning: data definition has no type or storage class drivers/net/ethernet/cavium/liquidio/lio_main.c:4671: error: type defaults to 'int' in declaration of 'module_exit' drivers/net/ethernet/cavium/liquidio/lio_main.c:4671: warning: parameter names (without types) in function declaration Add linux/module.h to both these files. drivers/net/ethernet/cavium/liquidio/octeon_console.c:40:31: error: expected ')' before 'int' drivers/net/ethernet/cavium/liquidio/octeon_console.c:42:4: error: expected ')' before string constant Add linux/moduleparam.h to this file. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-07 16:03:03 -07:00
#include <linux/module.h>
#include <linux/interrupt.h>
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
#include <linux/pci.h>
#include <linux/firmware.h>
#include <net/vxlan.h>
#include <linux/kthread.h>
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
#include "liquidio_common.h"
#include "octeon_droq.h"
#include "octeon_iq.h"
#include "response_manager.h"
#include "octeon_device.h"
#include "octeon_nic.h"
#include "octeon_main.h"
#include "octeon_network.h"
#include "cn66xx_regs.h"
#include "cn66xx_device.h"
#include "cn68xx_device.h"
#include "cn23xx_pf_device.h"
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
#include "liquidio_image.h"
MODULE_AUTHOR("Cavium Networks, <support@cavium.com>");
MODULE_DESCRIPTION("Cavium LiquidIO Intelligent Server Adapter Driver");
MODULE_LICENSE("GPL");
MODULE_VERSION(LIQUIDIO_VERSION);
MODULE_FIRMWARE(LIO_FW_DIR LIO_FW_BASE_NAME LIO_210SV_NAME LIO_FW_NAME_SUFFIX);
MODULE_FIRMWARE(LIO_FW_DIR LIO_FW_BASE_NAME LIO_210NV_NAME LIO_FW_NAME_SUFFIX);
MODULE_FIRMWARE(LIO_FW_DIR LIO_FW_BASE_NAME LIO_410NV_NAME LIO_FW_NAME_SUFFIX);
MODULE_FIRMWARE(LIO_FW_DIR LIO_FW_BASE_NAME LIO_23XX_NAME LIO_FW_NAME_SUFFIX);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
static int ddr_timeout = 10000;
module_param(ddr_timeout, int, 0644);
MODULE_PARM_DESC(ddr_timeout,
"Number of milliseconds to wait for DDR initialization. 0 waits for ddr_timeout to be set to non-zero value before starting to check");
#define DEFAULT_MSG_ENABLE (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK)
static int debug = -1;
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "NETIF_MSG debug bits");
static char fw_type[LIO_MAX_FW_TYPE_LEN];
module_param_string(fw_type, fw_type, sizeof(fw_type), 0000);
MODULE_PARM_DESC(fw_type, "Type of firmware to be loaded. Default \"nic\"");
static int ptp_enable = 1;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
/* Polling interval for determining when NIC application is alive */
#define LIQUIDIO_STARTER_POLL_INTERVAL_MS 100
/* runtime link query interval */
#define LIQUIDIO_LINK_QUERY_INTERVAL_MS 1000
struct liquidio_if_cfg_context {
int octeon_id;
wait_queue_head_t wc;
int cond;
};
struct liquidio_if_cfg_resp {
u64 rh;
struct liquidio_if_cfg_info cfg_info;
u64 status;
};
struct liquidio_rx_ctl_context {
int octeon_id;
wait_queue_head_t wc;
int cond;
};
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
struct oct_link_status_resp {
u64 rh;
struct oct_link_info link_info;
u64 status;
};
struct oct_timestamp_resp {
u64 rh;
u64 timestamp;
u64 status;
};
#define OCT_TIMESTAMP_RESP_SIZE (sizeof(struct oct_timestamp_resp))
union tx_info {
u64 u64;
struct {
#ifdef __BIG_ENDIAN_BITFIELD
u16 gso_size;
u16 gso_segs;
u32 reserved;
#else
u32 reserved;
u16 gso_segs;
u16 gso_size;
#endif
} s;
};
/** Octeon device properties to be used by the NIC module.
* Each octeon device in the system will be represented
* by this structure in the NIC module.
*/
#define OCTNIC_MAX_SG (MAX_SKB_FRAGS)
#define OCTNIC_GSO_MAX_HEADER_SIZE 128
#define OCTNIC_GSO_MAX_SIZE \
(CN23XX_DEFAULT_INPUT_JABBER - OCTNIC_GSO_MAX_HEADER_SIZE)
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
/** Structure of a node in list of gather components maintained by
* NIC driver for each network device.
*/
struct octnic_gather {
/** List manipulation. Next and prev pointers. */
struct list_head list;
/** Size of the gather component at sg in bytes. */
int sg_size;
/** Number of bytes that sg was adjusted to make it 8B-aligned. */
int adjust;
/** Gather component that can accommodate max sized fragment list
* received from the IP layer.
*/
struct octeon_sg_entry *sg;
liquidio: improve UDP TX performance Improve UDP TX performance by: * reducing the ring size from 2K to 512 * replacing the numerous streaming DMA allocations for info buffers and gather lists with one large consistent DMA allocation per ring BQL is not effective here. We reduced the ring size because there is heavy overhead with dma_map_single every so often. With iommu=on, dma_map_single in PF Tx data path was taking longer time (~700usec) for every ~250 packets. Debugged intel_iommu code, and found that PF driver is utilizing too many static IO virtual address mapping entries (for gather list entries and info buffers): about 100K entries for two PF's each using 8 rings. Also, finding an empty entry (in rbtree of device domain's iova mapping in kernel) during Tx path becomes a bottleneck every so often; the loop to find the empty entry goes through over 40K iterations; this is too costly and was the major overhead. Overhead is low when this loop quits quickly. Netperf benchmark numbers before and after patch: PF UDP TX +--------+--------+------------+------------+---------+ | | | Before | After | | | Number | | Patch | Patch | | | of | Packet | Throughput | Throughput | Percent | | Flows | Size | (Gbps) | (Gbps) | Change | +--------+--------+------------+------------+---------+ | | 360 | 0.52 | 0.93 | +78.9 | | 1 | 1024 | 1.62 | 2.84 | +75.3 | | | 1518 | 2.44 | 4.21 | +72.5 | +--------+--------+------------+------------+---------+ | | 360 | 0.45 | 1.59 | +253.3 | | 4 | 1024 | 1.34 | 5.48 | +308.9 | | | 1518 | 2.27 | 8.31 | +266.1 | +--------+--------+------------+------------+---------+ | | 360 | 0.40 | 1.61 | +302.5 | | 8 | 1024 | 1.64 | 4.24 | +158.5 | | | 1518 | 2.87 | 6.52 | +127.2 | +--------+--------+------------+------------+---------+ VF UDP TX +--------+--------+------------+------------+---------+ | | | Before | After | | | Number | | Patch | Patch | | | of | Packet | Throughput | Throughput | Percent | | Flows | Size | (Gbps) | (Gbps) | Change | +--------+--------+------------+------------+---------+ | | 360 | 1.28 | 1.49 | +16.4 | | 1 | 1024 | 4.44 | 4.39 | -1.1 | | | 1518 | 6.08 | 6.51 | +7.1 | +--------+--------+------------+------------+---------+ | | 360 | 2.35 | 2.35 | 0.0 | | 4 | 1024 | 6.41 | 8.07 | +25.9 | | | 1518 | 9.56 | 9.54 | -0.2 | +--------+--------+------------+------------+---------+ | | 360 | 3.41 | 3.65 | +7.0 | | 8 | 1024 | 9.35 | 9.34 | -0.1 | | | 1518 | 9.56 | 9.57 | +0.1 | +--------+--------+------------+------------+---------+ Signed-off-by: VSR Burru <veerasenareddy.burru@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-06 19:45:59 -07:00
dma_addr_t sg_dma_ptr;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
};
struct handshake {
struct completion init;
struct completion started;
struct pci_dev *pci_dev;
int init_ok;
int started_ok;
};
struct octeon_device_priv {
/** Tasklet structures for this device. */
struct tasklet_struct droq_tasklet;
unsigned long napi_mask;
};
#ifdef CONFIG_PCI_IOV
static int liquidio_enable_sriov(struct pci_dev *dev, int num_vfs);
#endif
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
static int octeon_device_init(struct octeon_device *);
static int liquidio_stop(struct net_device *netdev);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
static void liquidio_remove(struct pci_dev *pdev);
static int liquidio_probe(struct pci_dev *pdev,
const struct pci_device_id *ent);
liquidio: fix Octeon core watchdog timeout false alarm Detection of watchdog timeout of Octeon cores is flawed and susceptible to false alarms. Refactor by removing the detection code, and in its place, leverage existing code that monitors for an indication from the NIC firmware that an Octeon core crashed; expand the meaning of the indication to "an Octeon core crashed or its watchdog timer expired". Detection of watchdog timeout is now delegated to an exception handler in the NIC firmware; this is free of false alarms. Also if there's an Octeon core crash or watchdog timeout: (1) Disable VF Ethernet links. (2) Decrement the module refcount by an amount equal to the number of active VFs of the NIC whose Octeon core crashed or had a watchdog timeout. The refcount will continue to reflect the active VFs of other liquidio NIC(s) (if present) whose Octeon cores are faultless. Item (2) is needed to avoid the case of not being able to unload the driver because the module refcount is stuck at some non-zero number. There is code that, in normal cases, decrements the refcount upon receiving a message from the firmware that a VF driver was unloaded. But in exceptional cases like an Octeon core crash or watchdog timeout, arrival of that particular message from the firmware might be unreliable. That normal case code is changed to not touch the refcount in the exceptional case to avoid contention (over the refcount) with the liquidio_watchdog kernel thread who will carry out item (2). Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-04 20:26:57 -06:00
static int liquidio_set_vf_link_state(struct net_device *netdev, int vfidx,
int linkstate);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
static struct handshake handshake[MAX_OCTEON_DEVICES];
static struct completion first_stage;
Fix Cavium Liquidio build related errors and warnings 1) Fixed following sparse warnings: lio_main.c:213:6: warning: symbol 'octeon_droq_bh' was not declared. Should it be static? lio_main.c:233:5: warning: symbol 'lio_wait_for_oq_pkts' was not declared. Should it be static? lio_main.c:3083:5: warning: symbol 'lio_nic_info' was not declared. Should it be static? lio_main.c:2618:16: warning: cast from restricted __be16 octeon_device.c:466:6: warning: symbol 'oct_set_config_info' was not declared. Should it be static? octeon_device.c:573:25: warning: cast to restricted __be32 octeon_device.c:582:29: warning: cast to restricted __be32 octeon_device.c:584:39: warning: cast to restricted __be32 octeon_device.c:594:13: warning: cast to restricted __be32 octeon_device.c:596:25: warning: cast to restricted __be32 octeon_device.c:613:25: warning: cast to restricted __be32 octeon_device.c:614:29: warning: cast to restricted __be64 octeon_device.c:615:29: warning: cast to restricted __be32 octeon_device.c:619:37: warning: cast to restricted __be32 octeon_device.c:623:33: warning: cast to restricted __be32 cn66xx_device.c:540:6: warning: symbol 'lio_cn6xxx_get_pcie_qlmport' was not declared. Should it be s octeon_mem_ops.c:181:16: warning: cast to restricted __be64 octeon_mem_ops.c:190:16: warning: cast to restricted __be32 octeon_mem_ops.c:196:17: warning: incorrect type in initializer 2) Fix build errors corresponding to vmalloc on linux-next 4.1. 3) Liquidio now supports 64 bit only, modified Kconfig accordingly. 4) Fix some code alignment issues based on kernel build warnings. Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-12 19:11:50 -06:00
static void octeon_droq_bh(unsigned long pdev)
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
{
int q_no;
int reschedule = 0;
struct octeon_device *oct = (struct octeon_device *)pdev;
struct octeon_device_priv *oct_priv =
(struct octeon_device_priv *)oct->priv;
for (q_no = 0; q_no < MAX_OCTEON_OUTPUT_QUEUES(oct); q_no++) {
if (!(oct->io_qmask.oq & BIT_ULL(q_no)))
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
continue;
reschedule |= octeon_droq_process_packets(oct, oct->droq[q_no],
MAX_PACKET_BUDGET);
lio_enable_irq(oct->droq[q_no], NULL);
if (OCTEON_CN23XX_PF(oct) && oct->msix_on) {
/* set time and cnt interrupt thresholds for this DROQ
* for NAPI
*/
int adjusted_q_no = q_no + oct->sriov_info.pf_srn;
octeon_write_csr64(
oct, CN23XX_SLI_OQ_PKT_INT_LEVELS(adjusted_q_no),
0x5700000040ULL);
octeon_write_csr64(
oct, CN23XX_SLI_OQ_PKTS_SENT(adjusted_q_no), 0);
}
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
}
if (reschedule)
tasklet_schedule(&oct_priv->droq_tasklet);
}
Fix Cavium Liquidio build related errors and warnings 1) Fixed following sparse warnings: lio_main.c:213:6: warning: symbol 'octeon_droq_bh' was not declared. Should it be static? lio_main.c:233:5: warning: symbol 'lio_wait_for_oq_pkts' was not declared. Should it be static? lio_main.c:3083:5: warning: symbol 'lio_nic_info' was not declared. Should it be static? lio_main.c:2618:16: warning: cast from restricted __be16 octeon_device.c:466:6: warning: symbol 'oct_set_config_info' was not declared. Should it be static? octeon_device.c:573:25: warning: cast to restricted __be32 octeon_device.c:582:29: warning: cast to restricted __be32 octeon_device.c:584:39: warning: cast to restricted __be32 octeon_device.c:594:13: warning: cast to restricted __be32 octeon_device.c:596:25: warning: cast to restricted __be32 octeon_device.c:613:25: warning: cast to restricted __be32 octeon_device.c:614:29: warning: cast to restricted __be64 octeon_device.c:615:29: warning: cast to restricted __be32 octeon_device.c:619:37: warning: cast to restricted __be32 octeon_device.c:623:33: warning: cast to restricted __be32 cn66xx_device.c:540:6: warning: symbol 'lio_cn6xxx_get_pcie_qlmport' was not declared. Should it be s octeon_mem_ops.c:181:16: warning: cast to restricted __be64 octeon_mem_ops.c:190:16: warning: cast to restricted __be32 octeon_mem_ops.c:196:17: warning: incorrect type in initializer 2) Fix build errors corresponding to vmalloc on linux-next 4.1. 3) Liquidio now supports 64 bit only, modified Kconfig accordingly. 4) Fix some code alignment issues based on kernel build warnings. Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-12 19:11:50 -06:00
static int lio_wait_for_oq_pkts(struct octeon_device *oct)
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
{
struct octeon_device_priv *oct_priv =
(struct octeon_device_priv *)oct->priv;
int retry = 100, pkt_cnt = 0, pending_pkts = 0;
int i;
do {
pending_pkts = 0;
for (i = 0; i < MAX_OCTEON_OUTPUT_QUEUES(oct); i++) {
if (!(oct->io_qmask.oq & BIT_ULL(i)))
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
continue;
pkt_cnt += octeon_droq_check_hw_for_pkts(oct->droq[i]);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
}
if (pkt_cnt > 0) {
pending_pkts += pkt_cnt;
tasklet_schedule(&oct_priv->droq_tasklet);
}
pkt_cnt = 0;
schedule_timeout_uninterruptible(1);
} while (retry-- && pending_pkts);
return pkt_cnt;
}
/**
* \brief Forces all IO queues off on a given device
* @param oct Pointer to Octeon device
*/
static void force_io_queues_off(struct octeon_device *oct)
{
if ((oct->chip_id == OCTEON_CN66XX) ||
(oct->chip_id == OCTEON_CN68XX)) {
/* Reset the Enable bits for Input Queues. */
octeon_write_csr(oct, CN6XXX_SLI_PKT_INSTR_ENB, 0);
/* Reset the Enable bits for Output Queues. */
octeon_write_csr(oct, CN6XXX_SLI_PKT_OUT_ENB, 0);
}
}
/**
* \brief wait for all pending requests to complete
* @param oct Pointer to Octeon device
*
* Called during shutdown sequence
*/
static int wait_for_pending_requests(struct octeon_device *oct)
{
int i, pcount = 0;
for (i = 0; i < 100; i++) {
pcount =
atomic_read(&oct->response_list
[OCTEON_ORDERED_SC_LIST].pending_req_count);
if (pcount)
schedule_timeout_uninterruptible(HZ / 10);
else
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
break;
}
if (pcount)
return 1;
return 0;
}
/**
* \brief Cause device to go quiet so it can be safely removed/reset/etc
* @param oct Pointer to Octeon device
*/
static inline void pcierror_quiesce_device(struct octeon_device *oct)
{
int i;
/* Disable the input and output queues now. No more packets will
* arrive from Octeon, but we should wait for all packet processing
* to finish.
*/
force_io_queues_off(oct);
/* To allow for in-flight requests */
schedule_timeout_uninterruptible(100);
if (wait_for_pending_requests(oct))
dev_err(&oct->pci_dev->dev, "There were pending requests\n");
/* Force all requests waiting to be fetched by OCTEON to complete. */
for (i = 0; i < MAX_OCTEON_INSTR_QUEUES(oct); i++) {
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
struct octeon_instr_queue *iq;
if (!(oct->io_qmask.iq & BIT_ULL(i)))
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
continue;
iq = oct->instr_queue[i];
if (atomic_read(&iq->instr_pending)) {
spin_lock_bh(&iq->lock);
iq->fill_cnt = 0;
iq->octeon_read_index = iq->host_write_index;
iq->stats.instr_processed +=
atomic_read(&iq->instr_pending);
lio_process_iq_request_list(oct, iq, 0);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
spin_unlock_bh(&iq->lock);
}
}
/* Force all pending ordered list requests to time out. */
lio_process_ordered_list(oct, 1);
/* We do not need to wait for output queue packets to be processed. */
}
/**
* \brief Cleanup PCI AER uncorrectable error status
* @param dev Pointer to PCI device
*/
static void cleanup_aer_uncorrect_error_status(struct pci_dev *dev)
{
int pos = 0x100;
u32 status, mask;
pr_info("%s :\n", __func__);
pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, &status);
pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_SEVER, &mask);
if (dev->error_state == pci_channel_io_normal)
status &= ~mask; /* Clear corresponding nonfatal bits */
else
status &= mask; /* Clear corresponding fatal bits */
pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, status);
}
/**
* \brief Stop all PCI IO to a given device
* @param dev Pointer to Octeon device
*/
static void stop_pci_io(struct octeon_device *oct)
{
/* No more instructions will be forwarded. */
atomic_set(&oct->status, OCT_DEV_IN_RESET);
pci_disable_device(oct->pci_dev);
/* Disable interrupts */
oct->fn_list.disable_interrupt(oct, OCTEON_ALL_INTR);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
pcierror_quiesce_device(oct);
/* Release the interrupt line */
free_irq(oct->pci_dev->irq, oct);
if (oct->flags & LIO_FLAG_MSI_ENABLED)
pci_disable_msi(oct->pci_dev);
dev_dbg(&oct->pci_dev->dev, "Device state is now %s\n",
lio_get_state_string(&oct->status));
/* making it a common function for all OCTEON models */
cleanup_aer_uncorrect_error_status(oct->pci_dev);
}
/**
* \brief called when PCI error is detected
* @param pdev Pointer to PCI device
* @param state The current pci connection state
*
* This function is called after a PCI bus error affecting
* this device has been detected.
*/
static pci_ers_result_t liquidio_pcie_error_detected(struct pci_dev *pdev,
pci_channel_state_t state)
{
struct octeon_device *oct = pci_get_drvdata(pdev);
/* Non-correctable Non-fatal errors */
if (state == pci_channel_io_normal) {
dev_err(&oct->pci_dev->dev, "Non-correctable non-fatal error reported:\n");
cleanup_aer_uncorrect_error_status(oct->pci_dev);
return PCI_ERS_RESULT_CAN_RECOVER;
}
/* Non-correctable Fatal errors */
dev_err(&oct->pci_dev->dev, "Non-correctable FATAL reported by PCI AER driver\n");
stop_pci_io(oct);
/* Always return a DISCONNECT. There is no support for recovery but only
* for a clean shutdown.
*/
return PCI_ERS_RESULT_DISCONNECT;
}
/**
* \brief mmio handler
* @param pdev Pointer to PCI device
*/
static pci_ers_result_t liquidio_pcie_mmio_enabled(
struct pci_dev *pdev __attribute__((unused)))
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
{
/* We should never hit this since we never ask for a reset for a Fatal
* Error. We always return DISCONNECT in io_error above.
* But play safe and return RECOVERED for now.
*/
return PCI_ERS_RESULT_RECOVERED;
}
/**
* \brief called after the pci bus has been reset.
* @param pdev Pointer to PCI device
*
* Restart the card from scratch, as if from a cold-boot. Implementation
* resembles the first-half of the octeon_resume routine.
*/
static pci_ers_result_t liquidio_pcie_slot_reset(
struct pci_dev *pdev __attribute__((unused)))
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
{
/* We should never hit this since we never ask for a reset for a Fatal
* Error. We always return DISCONNECT in io_error above.
* But play safe and return RECOVERED for now.
*/
return PCI_ERS_RESULT_RECOVERED;
}
/**
* \brief called when traffic can start flowing again.
* @param pdev Pointer to PCI device
*
* This callback is called when the error recovery driver tells us that
* its OK to resume normal operation. Implementation resembles the
* second-half of the octeon_resume routine.
*/
static void liquidio_pcie_resume(struct pci_dev *pdev __attribute__((unused)))
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
{
/* Nothing to be done here. */
}
#ifdef CONFIG_PM
/**
* \brief called when suspending
* @param pdev Pointer to PCI device
* @param state state to suspend to
*/
static int liquidio_suspend(struct pci_dev *pdev __attribute__((unused)),
pm_message_t state __attribute__((unused)))
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
{
return 0;
}
/**
* \brief called when resuming
* @param pdev Pointer to PCI device
*/
static int liquidio_resume(struct pci_dev *pdev __attribute__((unused)))
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
{
return 0;
}
#endif
/* For PCI-E Advanced Error Recovery (AER) Interface */
static const struct pci_error_handlers liquidio_err_handler = {
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
.error_detected = liquidio_pcie_error_detected,
.mmio_enabled = liquidio_pcie_mmio_enabled,
.slot_reset = liquidio_pcie_slot_reset,
.resume = liquidio_pcie_resume,
};
static const struct pci_device_id liquidio_pci_tbl[] = {
{ /* 68xx */
PCI_VENDOR_ID_CAVIUM, 0x91, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0
},
{ /* 66xx */
PCI_VENDOR_ID_CAVIUM, 0x92, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0
},
{ /* 23xx pf */
PCI_VENDOR_ID_CAVIUM, 0x9702, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0
},
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
{
0, 0, 0, 0, 0, 0, 0
}
};
MODULE_DEVICE_TABLE(pci, liquidio_pci_tbl);
static struct pci_driver liquidio_pci_driver = {
.name = "LiquidIO",
.id_table = liquidio_pci_tbl,
.probe = liquidio_probe,
.remove = liquidio_remove,
.err_handler = &liquidio_err_handler, /* For AER */
#ifdef CONFIG_PM
.suspend = liquidio_suspend,
.resume = liquidio_resume,
#endif
#ifdef CONFIG_PCI_IOV
.sriov_configure = liquidio_enable_sriov,
#endif
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
};
/**
* \brief register PCI driver
*/
static int liquidio_init_pci(void)
{
return pci_register_driver(&liquidio_pci_driver);
}
/**
* \brief unregister PCI driver
*/
static void liquidio_deinit_pci(void)
{
pci_unregister_driver(&liquidio_pci_driver);
}
/**
* \brief Stop Tx queues
* @param netdev network device
*/
static inline void txqs_stop(struct net_device *netdev)
{
if (netif_is_multiqueue(netdev)) {
int i;
for (i = 0; i < netdev->num_tx_queues; i++)
netif_stop_subqueue(netdev, i);
} else {
netif_stop_queue(netdev);
}
}
/**
* \brief Start Tx queues
* @param netdev network device
*/
static inline void txqs_start(struct net_device *netdev)
{
if (netif_is_multiqueue(netdev)) {
int i;
for (i = 0; i < netdev->num_tx_queues; i++)
netif_start_subqueue(netdev, i);
} else {
netif_start_queue(netdev);
}
}
/**
* \brief Wake Tx queues
* @param netdev network device
*/
static inline void txqs_wake(struct net_device *netdev)
{
struct lio *lio = GET_LIO(netdev);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
if (netif_is_multiqueue(netdev)) {
int i;
for (i = 0; i < netdev->num_tx_queues; i++) {
int qno = lio->linfo.txpciq[i %
(lio->linfo.num_txpciq)].s.q_no;
if (__netif_subqueue_stopped(netdev, i)) {
INCR_INSTRQUEUE_PKT_COUNT(lio->oct_dev, qno,
tx_restart, 1);
netif_wake_subqueue(netdev, i);
}
}
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
} else {
INCR_INSTRQUEUE_PKT_COUNT(lio->oct_dev, lio->txq,
tx_restart, 1);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
netif_wake_queue(netdev);
}
}
/**
* \brief Stop Tx queue
* @param netdev network device
*/
static void stop_txq(struct net_device *netdev)
{
txqs_stop(netdev);
}
/**
* \brief Start Tx queue
* @param netdev network device
*/
static void start_txq(struct net_device *netdev)
{
struct lio *lio = GET_LIO(netdev);
if (lio->linfo.link.s.link_up) {
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
txqs_start(netdev);
return;
}
}
/**
* \brief Wake a queue
* @param netdev network device
* @param q which queue to wake
*/
static inline void wake_q(struct net_device *netdev, int q)
{
if (netif_is_multiqueue(netdev))
netif_wake_subqueue(netdev, q);
else
netif_wake_queue(netdev);
}
/**
* \brief Stop a queue
* @param netdev network device
* @param q which queue to stop
*/
static inline void stop_q(struct net_device *netdev, int q)
{
if (netif_is_multiqueue(netdev))
netif_stop_subqueue(netdev, q);
else
netif_stop_queue(netdev);
}
/**
* \brief Check Tx queue status, and take appropriate action
* @param lio per-network private data
* @returns 0 if full, number of queues woken up otherwise
*/
static inline int check_txq_status(struct lio *lio)
{
int ret_val = 0;
if (netif_is_multiqueue(lio->netdev)) {
int numqs = lio->netdev->num_tx_queues;
int q, iq = 0;
/* check each sub-queue state */
for (q = 0; q < numqs; q++) {
iq = lio->linfo.txpciq[q %
(lio->linfo.num_txpciq)].s.q_no;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
if (octnet_iq_is_full(lio->oct_dev, iq))
continue;
if (__netif_subqueue_stopped(lio->netdev, q)) {
wake_q(lio->netdev, q);
INCR_INSTRQUEUE_PKT_COUNT(lio->oct_dev, iq,
tx_restart, 1);
ret_val++;
}
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
}
} else {
if (octnet_iq_is_full(lio->oct_dev, lio->txq))
return 0;
wake_q(lio->netdev, lio->txq);
INCR_INSTRQUEUE_PKT_COUNT(lio->oct_dev, lio->txq,
tx_restart, 1);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
ret_val = 1;
}
return ret_val;
}
/**
* Remove the node at the head of the list. The list would be empty at
* the end of this call if there are no more nodes in the list.
*/
static inline struct list_head *list_delete_head(struct list_head *root)
{
struct list_head *node;
if ((root->prev == root) && (root->next == root))
node = NULL;
else
node = root->next;
if (node)
list_del(node);
return node;
}
/**
* \brief Delete gather lists
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
* @param lio per-network private data
*/
static void delete_glists(struct lio *lio)
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
{
struct octnic_gather *g;
int i;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
liquidio: improve UDP TX performance Improve UDP TX performance by: * reducing the ring size from 2K to 512 * replacing the numerous streaming DMA allocations for info buffers and gather lists with one large consistent DMA allocation per ring BQL is not effective here. We reduced the ring size because there is heavy overhead with dma_map_single every so often. With iommu=on, dma_map_single in PF Tx data path was taking longer time (~700usec) for every ~250 packets. Debugged intel_iommu code, and found that PF driver is utilizing too many static IO virtual address mapping entries (for gather list entries and info buffers): about 100K entries for two PF's each using 8 rings. Also, finding an empty entry (in rbtree of device domain's iova mapping in kernel) during Tx path becomes a bottleneck every so often; the loop to find the empty entry goes through over 40K iterations; this is too costly and was the major overhead. Overhead is low when this loop quits quickly. Netperf benchmark numbers before and after patch: PF UDP TX +--------+--------+------------+------------+---------+ | | | Before | After | | | Number | | Patch | Patch | | | of | Packet | Throughput | Throughput | Percent | | Flows | Size | (Gbps) | (Gbps) | Change | +--------+--------+------------+------------+---------+ | | 360 | 0.52 | 0.93 | +78.9 | | 1 | 1024 | 1.62 | 2.84 | +75.3 | | | 1518 | 2.44 | 4.21 | +72.5 | +--------+--------+------------+------------+---------+ | | 360 | 0.45 | 1.59 | +253.3 | | 4 | 1024 | 1.34 | 5.48 | +308.9 | | | 1518 | 2.27 | 8.31 | +266.1 | +--------+--------+------------+------------+---------+ | | 360 | 0.40 | 1.61 | +302.5 | | 8 | 1024 | 1.64 | 4.24 | +158.5 | | | 1518 | 2.87 | 6.52 | +127.2 | +--------+--------+------------+------------+---------+ VF UDP TX +--------+--------+------------+------------+---------+ | | | Before | After | | | Number | | Patch | Patch | | | of | Packet | Throughput | Throughput | Percent | | Flows | Size | (Gbps) | (Gbps) | Change | +--------+--------+------------+------------+---------+ | | 360 | 1.28 | 1.49 | +16.4 | | 1 | 1024 | 4.44 | 4.39 | -1.1 | | | 1518 | 6.08 | 6.51 | +7.1 | +--------+--------+------------+------------+---------+ | | 360 | 2.35 | 2.35 | 0.0 | | 4 | 1024 | 6.41 | 8.07 | +25.9 | | | 1518 | 9.56 | 9.54 | -0.2 | +--------+--------+------------+------------+---------+ | | 360 | 3.41 | 3.65 | +7.0 | | 8 | 1024 | 9.35 | 9.34 | -0.1 | | | 1518 | 9.56 | 9.57 | +0.1 | +--------+--------+------------+------------+---------+ Signed-off-by: VSR Burru <veerasenareddy.burru@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-06 19:45:59 -07:00
kfree(lio->glist_lock);
lio->glist_lock = NULL;
if (!lio->glist)
return;
for (i = 0; i < lio->linfo.num_txpciq; i++) {
do {
g = (struct octnic_gather *)
list_delete_head(&lio->glist[i]);
liquidio: improve UDP TX performance Improve UDP TX performance by: * reducing the ring size from 2K to 512 * replacing the numerous streaming DMA allocations for info buffers and gather lists with one large consistent DMA allocation per ring BQL is not effective here. We reduced the ring size because there is heavy overhead with dma_map_single every so often. With iommu=on, dma_map_single in PF Tx data path was taking longer time (~700usec) for every ~250 packets. Debugged intel_iommu code, and found that PF driver is utilizing too many static IO virtual address mapping entries (for gather list entries and info buffers): about 100K entries for two PF's each using 8 rings. Also, finding an empty entry (in rbtree of device domain's iova mapping in kernel) during Tx path becomes a bottleneck every so often; the loop to find the empty entry goes through over 40K iterations; this is too costly and was the major overhead. Overhead is low when this loop quits quickly. Netperf benchmark numbers before and after patch: PF UDP TX +--------+--------+------------+------------+---------+ | | | Before | After | | | Number | | Patch | Patch | | | of | Packet | Throughput | Throughput | Percent | | Flows | Size | (Gbps) | (Gbps) | Change | +--------+--------+------------+------------+---------+ | | 360 | 0.52 | 0.93 | +78.9 | | 1 | 1024 | 1.62 | 2.84 | +75.3 | | | 1518 | 2.44 | 4.21 | +72.5 | +--------+--------+------------+------------+---------+ | | 360 | 0.45 | 1.59 | +253.3 | | 4 | 1024 | 1.34 | 5.48 | +308.9 | | | 1518 | 2.27 | 8.31 | +266.1 | +--------+--------+------------+------------+---------+ | | 360 | 0.40 | 1.61 | +302.5 | | 8 | 1024 | 1.64 | 4.24 | +158.5 | | | 1518 | 2.87 | 6.52 | +127.2 | +--------+--------+------------+------------+---------+ VF UDP TX +--------+--------+------------+------------+---------+ | | | Before | After | | | Number | | Patch | Patch | | | of | Packet | Throughput | Throughput | Percent | | Flows | Size | (Gbps) | (Gbps) | Change | +--------+--------+------------+------------+---------+ | | 360 | 1.28 | 1.49 | +16.4 | | 1 | 1024 | 4.44 | 4.39 | -1.1 | | | 1518 | 6.08 | 6.51 | +7.1 | +--------+--------+------------+------------+---------+ | | 360 | 2.35 | 2.35 | 0.0 | | 4 | 1024 | 6.41 | 8.07 | +25.9 | | | 1518 | 9.56 | 9.54 | -0.2 | +--------+--------+------------+------------+---------+ | | 360 | 3.41 | 3.65 | +7.0 | | 8 | 1024 | 9.35 | 9.34 | -0.1 | | | 1518 | 9.56 | 9.57 | +0.1 | +--------+--------+------------+------------+---------+ Signed-off-by: VSR Burru <veerasenareddy.burru@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-06 19:45:59 -07:00
if (g)
kfree(g);
} while (g);
liquidio: improve UDP TX performance Improve UDP TX performance by: * reducing the ring size from 2K to 512 * replacing the numerous streaming DMA allocations for info buffers and gather lists with one large consistent DMA allocation per ring BQL is not effective here. We reduced the ring size because there is heavy overhead with dma_map_single every so often. With iommu=on, dma_map_single in PF Tx data path was taking longer time (~700usec) for every ~250 packets. Debugged intel_iommu code, and found that PF driver is utilizing too many static IO virtual address mapping entries (for gather list entries and info buffers): about 100K entries for two PF's each using 8 rings. Also, finding an empty entry (in rbtree of device domain's iova mapping in kernel) during Tx path becomes a bottleneck every so often; the loop to find the empty entry goes through over 40K iterations; this is too costly and was the major overhead. Overhead is low when this loop quits quickly. Netperf benchmark numbers before and after patch: PF UDP TX +--------+--------+------------+------------+---------+ | | | Before | After | | | Number | | Patch | Patch | | | of | Packet | Throughput | Throughput | Percent | | Flows | Size | (Gbps) | (Gbps) | Change | +--------+--------+------------+------------+---------+ | | 360 | 0.52 | 0.93 | +78.9 | | 1 | 1024 | 1.62 | 2.84 | +75.3 | | | 1518 | 2.44 | 4.21 | +72.5 | +--------+--------+------------+------------+---------+ | | 360 | 0.45 | 1.59 | +253.3 | | 4 | 1024 | 1.34 | 5.48 | +308.9 | | | 1518 | 2.27 | 8.31 | +266.1 | +--------+--------+------------+------------+---------+ | | 360 | 0.40 | 1.61 | +302.5 | | 8 | 1024 | 1.64 | 4.24 | +158.5 | | | 1518 | 2.87 | 6.52 | +127.2 | +--------+--------+------------+------------+---------+ VF UDP TX +--------+--------+------------+------------+---------+ | | | Before | After | | | Number | | Patch | Patch | | | of | Packet | Throughput | Throughput | Percent | | Flows | Size | (Gbps) | (Gbps) | Change | +--------+--------+------------+------------+---------+ | | 360 | 1.28 | 1.49 | +16.4 | | 1 | 1024 | 4.44 | 4.39 | -1.1 | | | 1518 | 6.08 | 6.51 | +7.1 | +--------+--------+------------+------------+---------+ | | 360 | 2.35 | 2.35 | 0.0 | | 4 | 1024 | 6.41 | 8.07 | +25.9 | | | 1518 | 9.56 | 9.54 | -0.2 | +--------+--------+------------+------------+---------+ | | 360 | 3.41 | 3.65 | +7.0 | | 8 | 1024 | 9.35 | 9.34 | -0.1 | | | 1518 | 9.56 | 9.57 | +0.1 | +--------+--------+------------+------------+---------+ Signed-off-by: VSR Burru <veerasenareddy.burru@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-06 19:45:59 -07:00
if (lio->glists_virt_base && lio->glists_virt_base[i] &&
lio->glists_dma_base && lio->glists_dma_base[i]) {
liquidio: improve UDP TX performance Improve UDP TX performance by: * reducing the ring size from 2K to 512 * replacing the numerous streaming DMA allocations for info buffers and gather lists with one large consistent DMA allocation per ring BQL is not effective here. We reduced the ring size because there is heavy overhead with dma_map_single every so often. With iommu=on, dma_map_single in PF Tx data path was taking longer time (~700usec) for every ~250 packets. Debugged intel_iommu code, and found that PF driver is utilizing too many static IO virtual address mapping entries (for gather list entries and info buffers): about 100K entries for two PF's each using 8 rings. Also, finding an empty entry (in rbtree of device domain's iova mapping in kernel) during Tx path becomes a bottleneck every so often; the loop to find the empty entry goes through over 40K iterations; this is too costly and was the major overhead. Overhead is low when this loop quits quickly. Netperf benchmark numbers before and after patch: PF UDP TX +--------+--------+------------+------------+---------+ | | | Before | After | | | Number | | Patch | Patch | | | of | Packet | Throughput | Throughput | Percent | | Flows | Size | (Gbps) | (Gbps) | Change | +--------+--------+------------+------------+---------+ | | 360 | 0.52 | 0.93 | +78.9 | | 1 | 1024 | 1.62 | 2.84 | +75.3 | | | 1518 | 2.44 | 4.21 | +72.5 | +--------+--------+------------+------------+---------+ | | 360 | 0.45 | 1.59 | +253.3 | | 4 | 1024 | 1.34 | 5.48 | +308.9 | | | 1518 | 2.27 | 8.31 | +266.1 | +--------+--------+------------+------------+---------+ | | 360 | 0.40 | 1.61 | +302.5 | | 8 | 1024 | 1.64 | 4.24 | +158.5 | | | 1518 | 2.87 | 6.52 | +127.2 | +--------+--------+------------+------------+---------+ VF UDP TX +--------+--------+------------+------------+---------+ | | | Before | After | | | Number | | Patch | Patch | | | of | Packet | Throughput | Throughput | Percent | | Flows | Size | (Gbps) | (Gbps) | Change | +--------+--------+------------+------------+---------+ | | 360 | 1.28 | 1.49 | +16.4 | | 1 | 1024 | 4.44 | 4.39 | -1.1 | | | 1518 | 6.08 | 6.51 | +7.1 | +--------+--------+------------+------------+---------+ | | 360 | 2.35 | 2.35 | 0.0 | | 4 | 1024 | 6.41 | 8.07 | +25.9 | | | 1518 | 9.56 | 9.54 | -0.2 | +--------+--------+------------+------------+---------+ | | 360 | 3.41 | 3.65 | +7.0 | | 8 | 1024 | 9.35 | 9.34 | -0.1 | | | 1518 | 9.56 | 9.57 | +0.1 | +--------+--------+------------+------------+---------+ Signed-off-by: VSR Burru <veerasenareddy.burru@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-06 19:45:59 -07:00
lio_dma_free(lio->oct_dev,
lio->glist_entry_size * lio->tx_qsize,
lio->glists_virt_base[i],
lio->glists_dma_base[i]);
}
}
liquidio: improve UDP TX performance Improve UDP TX performance by: * reducing the ring size from 2K to 512 * replacing the numerous streaming DMA allocations for info buffers and gather lists with one large consistent DMA allocation per ring BQL is not effective here. We reduced the ring size because there is heavy overhead with dma_map_single every so often. With iommu=on, dma_map_single in PF Tx data path was taking longer time (~700usec) for every ~250 packets. Debugged intel_iommu code, and found that PF driver is utilizing too many static IO virtual address mapping entries (for gather list entries and info buffers): about 100K entries for two PF's each using 8 rings. Also, finding an empty entry (in rbtree of device domain's iova mapping in kernel) during Tx path becomes a bottleneck every so often; the loop to find the empty entry goes through over 40K iterations; this is too costly and was the major overhead. Overhead is low when this loop quits quickly. Netperf benchmark numbers before and after patch: PF UDP TX +--------+--------+------------+------------+---------+ | | | Before | After | | | Number | | Patch | Patch | | | of | Packet | Throughput | Throughput | Percent | | Flows | Size | (Gbps) | (Gbps) | Change | +--------+--------+------------+------------+---------+ | | 360 | 0.52 | 0.93 | +78.9 | | 1 | 1024 | 1.62 | 2.84 | +75.3 | | | 1518 | 2.44 | 4.21 | +72.5 | +--------+--------+------------+------------+---------+ | | 360 | 0.45 | 1.59 | +253.3 | | 4 | 1024 | 1.34 | 5.48 | +308.9 | | | 1518 | 2.27 | 8.31 | +266.1 | +--------+--------+------------+------------+---------+ | | 360 | 0.40 | 1.61 | +302.5 | | 8 | 1024 | 1.64 | 4.24 | +158.5 | | | 1518 | 2.87 | 6.52 | +127.2 | +--------+--------+------------+------------+---------+ VF UDP TX +--------+--------+------------+------------+---------+ | | | Before | After | | | Number | | Patch | Patch | | | of | Packet | Throughput | Throughput | Percent | | Flows | Size | (Gbps) | (Gbps) | Change | +--------+--------+------------+------------+---------+ | | 360 | 1.28 | 1.49 | +16.4 | | 1 | 1024 | 4.44 | 4.39 | -1.1 | | | 1518 | 6.08 | 6.51 | +7.1 | +--------+--------+------------+------------+---------+ | | 360 | 2.35 | 2.35 | 0.0 | | 4 | 1024 | 6.41 | 8.07 | +25.9 | | | 1518 | 9.56 | 9.54 | -0.2 | +--------+--------+------------+------------+---------+ | | 360 | 3.41 | 3.65 | +7.0 | | 8 | 1024 | 9.35 | 9.34 | -0.1 | | | 1518 | 9.56 | 9.57 | +0.1 | +--------+--------+------------+------------+---------+ Signed-off-by: VSR Burru <veerasenareddy.burru@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-06 19:45:59 -07:00
kfree(lio->glists_virt_base);
lio->glists_virt_base = NULL;
kfree(lio->glists_dma_base);
lio->glists_dma_base = NULL;
kfree(lio->glist);
lio->glist = NULL;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
}
/**
* \brief Setup gather lists
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
* @param lio per-network private data
*/
static int setup_glists(struct octeon_device *oct, struct lio *lio, int num_iqs)
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
{
int i, j;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
struct octnic_gather *g;
lio->glist_lock = kcalloc(num_iqs, sizeof(*lio->glist_lock),
GFP_KERNEL);
if (!lio->glist_lock)
liquidio: improve UDP TX performance Improve UDP TX performance by: * reducing the ring size from 2K to 512 * replacing the numerous streaming DMA allocations for info buffers and gather lists with one large consistent DMA allocation per ring BQL is not effective here. We reduced the ring size because there is heavy overhead with dma_map_single every so often. With iommu=on, dma_map_single in PF Tx data path was taking longer time (~700usec) for every ~250 packets. Debugged intel_iommu code, and found that PF driver is utilizing too many static IO virtual address mapping entries (for gather list entries and info buffers): about 100K entries for two PF's each using 8 rings. Also, finding an empty entry (in rbtree of device domain's iova mapping in kernel) during Tx path becomes a bottleneck every so often; the loop to find the empty entry goes through over 40K iterations; this is too costly and was the major overhead. Overhead is low when this loop quits quickly. Netperf benchmark numbers before and after patch: PF UDP TX +--------+--------+------------+------------+---------+ | | | Before | After | | | Number | | Patch | Patch | | | of | Packet | Throughput | Throughput | Percent | | Flows | Size | (Gbps) | (Gbps) | Change | +--------+--------+------------+------------+---------+ | | 360 | 0.52 | 0.93 | +78.9 | | 1 | 1024 | 1.62 | 2.84 | +75.3 | | | 1518 | 2.44 | 4.21 | +72.5 | +--------+--------+------------+------------+---------+ | | 360 | 0.45 | 1.59 | +253.3 | | 4 | 1024 | 1.34 | 5.48 | +308.9 | | | 1518 | 2.27 | 8.31 | +266.1 | +--------+--------+------------+------------+---------+ | | 360 | 0.40 | 1.61 | +302.5 | | 8 | 1024 | 1.64 | 4.24 | +158.5 | | | 1518 | 2.87 | 6.52 | +127.2 | +--------+--------+------------+------------+---------+ VF UDP TX +--------+--------+------------+------------+---------+ | | | Before | After | | | Number | | Patch | Patch | | | of | Packet | Throughput | Throughput | Percent | | Flows | Size | (Gbps) | (Gbps) | Change | +--------+--------+------------+------------+---------+ | | 360 | 1.28 | 1.49 | +16.4 | | 1 | 1024 | 4.44 | 4.39 | -1.1 | | | 1518 | 6.08 | 6.51 | +7.1 | +--------+--------+------------+------------+---------+ | | 360 | 2.35 | 2.35 | 0.0 | | 4 | 1024 | 6.41 | 8.07 | +25.9 | | | 1518 | 9.56 | 9.54 | -0.2 | +--------+--------+------------+------------+---------+ | | 360 | 3.41 | 3.65 | +7.0 | | 8 | 1024 | 9.35 | 9.34 | -0.1 | | | 1518 | 9.56 | 9.57 | +0.1 | +--------+--------+------------+------------+---------+ Signed-off-by: VSR Burru <veerasenareddy.burru@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-06 19:45:59 -07:00
return -ENOMEM;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
lio->glist = kcalloc(num_iqs, sizeof(*lio->glist),
GFP_KERNEL);
if (!lio->glist) {
liquidio: improve UDP TX performance Improve UDP TX performance by: * reducing the ring size from 2K to 512 * replacing the numerous streaming DMA allocations for info buffers and gather lists with one large consistent DMA allocation per ring BQL is not effective here. We reduced the ring size because there is heavy overhead with dma_map_single every so often. With iommu=on, dma_map_single in PF Tx data path was taking longer time (~700usec) for every ~250 packets. Debugged intel_iommu code, and found that PF driver is utilizing too many static IO virtual address mapping entries (for gather list entries and info buffers): about 100K entries for two PF's each using 8 rings. Also, finding an empty entry (in rbtree of device domain's iova mapping in kernel) during Tx path becomes a bottleneck every so often; the loop to find the empty entry goes through over 40K iterations; this is too costly and was the major overhead. Overhead is low when this loop quits quickly. Netperf benchmark numbers before and after patch: PF UDP TX +--------+--------+------------+------------+---------+ | | | Before | After | | | Number | | Patch | Patch | | | of | Packet | Throughput | Throughput | Percent | | Flows | Size | (Gbps) | (Gbps) | Change | +--------+--------+------------+------------+---------+ | | 360 | 0.52 | 0.93 | +78.9 | | 1 | 1024 | 1.62 | 2.84 | +75.3 | | | 1518 | 2.44 | 4.21 | +72.5 | +--------+--------+------------+------------+---------+ | | 360 | 0.45 | 1.59 | +253.3 | | 4 | 1024 | 1.34 | 5.48 | +308.9 | | | 1518 | 2.27 | 8.31 | +266.1 | +--------+--------+------------+------------+---------+ | | 360 | 0.40 | 1.61 | +302.5 | | 8 | 1024 | 1.64 | 4.24 | +158.5 | | | 1518 | 2.87 | 6.52 | +127.2 | +--------+--------+------------+------------+---------+ VF UDP TX +--------+--------+------------+------------+---------+ | | | Before | After | | | Number | | Patch | Patch | | | of | Packet | Throughput | Throughput | Percent | | Flows | Size | (Gbps) | (Gbps) | Change | +--------+--------+------------+------------+---------+ | | 360 | 1.28 | 1.49 | +16.4 | | 1 | 1024 | 4.44 | 4.39 | -1.1 | | | 1518 | 6.08 | 6.51 | +7.1 | +--------+--------+------------+------------+---------+ | | 360 | 2.35 | 2.35 | 0.0 | | 4 | 1024 | 6.41 | 8.07 | +25.9 | | | 1518 | 9.56 | 9.54 | -0.2 | +--------+--------+------------+------------+---------+ | | 360 | 3.41 | 3.65 | +7.0 | | 8 | 1024 | 9.35 | 9.34 | -0.1 | | | 1518 | 9.56 | 9.57 | +0.1 | +--------+--------+------------+------------+---------+ Signed-off-by: VSR Burru <veerasenareddy.burru@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-06 19:45:59 -07:00
kfree(lio->glist_lock);
lio->glist_lock = NULL;
return -ENOMEM;
}
lio->glist_entry_size =
ROUNDUP8((ROUNDUP4(OCTNIC_MAX_SG) >> 2) * OCT_SG_ENTRY_SIZE);
/* allocate memory to store virtual and dma base address of
* per glist consistent memory
*/
lio->glists_virt_base = kcalloc(num_iqs, sizeof(*lio->glists_virt_base),
GFP_KERNEL);
lio->glists_dma_base = kcalloc(num_iqs, sizeof(*lio->glists_dma_base),
GFP_KERNEL);
if (!lio->glists_virt_base || !lio->glists_dma_base) {
delete_glists(lio);
return -ENOMEM;
}
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
for (i = 0; i < num_iqs; i++) {
int numa_node = dev_to_node(&oct->pci_dev->dev);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
spin_lock_init(&lio->glist_lock[i]);
INIT_LIST_HEAD(&lio->glist[i]);
liquidio: improve UDP TX performance Improve UDP TX performance by: * reducing the ring size from 2K to 512 * replacing the numerous streaming DMA allocations for info buffers and gather lists with one large consistent DMA allocation per ring BQL is not effective here. We reduced the ring size because there is heavy overhead with dma_map_single every so often. With iommu=on, dma_map_single in PF Tx data path was taking longer time (~700usec) for every ~250 packets. Debugged intel_iommu code, and found that PF driver is utilizing too many static IO virtual address mapping entries (for gather list entries and info buffers): about 100K entries for two PF's each using 8 rings. Also, finding an empty entry (in rbtree of device domain's iova mapping in kernel) during Tx path becomes a bottleneck every so often; the loop to find the empty entry goes through over 40K iterations; this is too costly and was the major overhead. Overhead is low when this loop quits quickly. Netperf benchmark numbers before and after patch: PF UDP TX +--------+--------+------------+------------+---------+ | | | Before | After | | | Number | | Patch | Patch | | | of | Packet | Throughput | Throughput | Percent | | Flows | Size | (Gbps) | (Gbps) | Change | +--------+--------+------------+------------+---------+ | | 360 | 0.52 | 0.93 | +78.9 | | 1 | 1024 | 1.62 | 2.84 | +75.3 | | | 1518 | 2.44 | 4.21 | +72.5 | +--------+--------+------------+------------+---------+ | | 360 | 0.45 | 1.59 | +253.3 | | 4 | 1024 | 1.34 | 5.48 | +308.9 | | | 1518 | 2.27 | 8.31 | +266.1 | +--------+--------+------------+------------+---------+ | | 360 | 0.40 | 1.61 | +302.5 | | 8 | 1024 | 1.64 | 4.24 | +158.5 | | | 1518 | 2.87 | 6.52 | +127.2 | +--------+--------+------------+------------+---------+ VF UDP TX +--------+--------+------------+------------+---------+ | | | Before | After | | | Number | | Patch | Patch | | | of | Packet | Throughput | Throughput | Percent | | Flows | Size | (Gbps) | (Gbps) | Change | +--------+--------+------------+------------+---------+ | | 360 | 1.28 | 1.49 | +16.4 | | 1 | 1024 | 4.44 | 4.39 | -1.1 | | | 1518 | 6.08 | 6.51 | +7.1 | +--------+--------+------------+------------+---------+ | | 360 | 2.35 | 2.35 | 0.0 | | 4 | 1024 | 6.41 | 8.07 | +25.9 | | | 1518 | 9.56 | 9.54 | -0.2 | +--------+--------+------------+------------+---------+ | | 360 | 3.41 | 3.65 | +7.0 | | 8 | 1024 | 9.35 | 9.34 | -0.1 | | | 1518 | 9.56 | 9.57 | +0.1 | +--------+--------+------------+------------+---------+ Signed-off-by: VSR Burru <veerasenareddy.burru@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-06 19:45:59 -07:00
lio->glists_virt_base[i] =
lio_dma_alloc(oct,
lio->glist_entry_size * lio->tx_qsize,
&lio->glists_dma_base[i]);
if (!lio->glists_virt_base[i]) {
delete_glists(lio);
return -ENOMEM;
}
for (j = 0; j < lio->tx_qsize; j++) {
g = kzalloc_node(sizeof(*g), GFP_KERNEL,
numa_node);
if (!g)
g = kzalloc(sizeof(*g), GFP_KERNEL);
if (!g)
break;
liquidio: improve UDP TX performance Improve UDP TX performance by: * reducing the ring size from 2K to 512 * replacing the numerous streaming DMA allocations for info buffers and gather lists with one large consistent DMA allocation per ring BQL is not effective here. We reduced the ring size because there is heavy overhead with dma_map_single every so often. With iommu=on, dma_map_single in PF Tx data path was taking longer time (~700usec) for every ~250 packets. Debugged intel_iommu code, and found that PF driver is utilizing too many static IO virtual address mapping entries (for gather list entries and info buffers): about 100K entries for two PF's each using 8 rings. Also, finding an empty entry (in rbtree of device domain's iova mapping in kernel) during Tx path becomes a bottleneck every so often; the loop to find the empty entry goes through over 40K iterations; this is too costly and was the major overhead. Overhead is low when this loop quits quickly. Netperf benchmark numbers before and after patch: PF UDP TX +--------+--------+------------+------------+---------+ | | | Before | After | | | Number | | Patch | Patch | | | of | Packet | Throughput | Throughput | Percent | | Flows | Size | (Gbps) | (Gbps) | Change | +--------+--------+------------+------------+---------+ | | 360 | 0.52 | 0.93 | +78.9 | | 1 | 1024 | 1.62 | 2.84 | +75.3 | | | 1518 | 2.44 | 4.21 | +72.5 | +--------+--------+------------+------------+---------+ | | 360 | 0.45 | 1.59 | +253.3 | | 4 | 1024 | 1.34 | 5.48 | +308.9 | | | 1518 | 2.27 | 8.31 | +266.1 | +--------+--------+------------+------------+---------+ | | 360 | 0.40 | 1.61 | +302.5 | | 8 | 1024 | 1.64 | 4.24 | +158.5 | | | 1518 | 2.87 | 6.52 | +127.2 | +--------+--------+------------+------------+---------+ VF UDP TX +--------+--------+------------+------------+---------+ | | | Before | After | | | Number | | Patch | Patch | | | of | Packet | Throughput | Throughput | Percent | | Flows | Size | (Gbps) | (Gbps) | Change | +--------+--------+------------+------------+---------+ | | 360 | 1.28 | 1.49 | +16.4 | | 1 | 1024 | 4.44 | 4.39 | -1.1 | | | 1518 | 6.08 | 6.51 | +7.1 | +--------+--------+------------+------------+---------+ | | 360 | 2.35 | 2.35 | 0.0 | | 4 | 1024 | 6.41 | 8.07 | +25.9 | | | 1518 | 9.56 | 9.54 | -0.2 | +--------+--------+------------+------------+---------+ | | 360 | 3.41 | 3.65 | +7.0 | | 8 | 1024 | 9.35 | 9.34 | -0.1 | | | 1518 | 9.56 | 9.57 | +0.1 | +--------+--------+------------+------------+---------+ Signed-off-by: VSR Burru <veerasenareddy.burru@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-06 19:45:59 -07:00
g->sg = lio->glists_virt_base[i] +
(j * lio->glist_entry_size);
liquidio: improve UDP TX performance Improve UDP TX performance by: * reducing the ring size from 2K to 512 * replacing the numerous streaming DMA allocations for info buffers and gather lists with one large consistent DMA allocation per ring BQL is not effective here. We reduced the ring size because there is heavy overhead with dma_map_single every so often. With iommu=on, dma_map_single in PF Tx data path was taking longer time (~700usec) for every ~250 packets. Debugged intel_iommu code, and found that PF driver is utilizing too many static IO virtual address mapping entries (for gather list entries and info buffers): about 100K entries for two PF's each using 8 rings. Also, finding an empty entry (in rbtree of device domain's iova mapping in kernel) during Tx path becomes a bottleneck every so often; the loop to find the empty entry goes through over 40K iterations; this is too costly and was the major overhead. Overhead is low when this loop quits quickly. Netperf benchmark numbers before and after patch: PF UDP TX +--------+--------+------------+------------+---------+ | | | Before | After | | | Number | | Patch | Patch | | | of | Packet | Throughput | Throughput | Percent | | Flows | Size | (Gbps) | (Gbps) | Change | +--------+--------+------------+------------+---------+ | | 360 | 0.52 | 0.93 | +78.9 | | 1 | 1024 | 1.62 | 2.84 | +75.3 | | | 1518 | 2.44 | 4.21 | +72.5 | +--------+--------+------------+------------+---------+ | | 360 | 0.45 | 1.59 | +253.3 | | 4 | 1024 | 1.34 | 5.48 | +308.9 | | | 1518 | 2.27 | 8.31 | +266.1 | +--------+--------+------------+------------+---------+ | | 360 | 0.40 | 1.61 | +302.5 | | 8 | 1024 | 1.64 | 4.24 | +158.5 | | | 1518 | 2.87 | 6.52 | +127.2 | +--------+--------+------------+------------+---------+ VF UDP TX +--------+--------+------------+------------+---------+ | | | Before | After | | | Number | | Patch | Patch | | | of | Packet | Throughput | Throughput | Percent | | Flows | Size | (Gbps) | (Gbps) | Change | +--------+--------+------------+------------+---------+ | | 360 | 1.28 | 1.49 | +16.4 | | 1 | 1024 | 4.44 | 4.39 | -1.1 | | | 1518 | 6.08 | 6.51 | +7.1 | +--------+--------+------------+------------+---------+ | | 360 | 2.35 | 2.35 | 0.0 | | 4 | 1024 | 6.41 | 8.07 | +25.9 | | | 1518 | 9.56 | 9.54 | -0.2 | +--------+--------+------------+------------+---------+ | | 360 | 3.41 | 3.65 | +7.0 | | 8 | 1024 | 9.35 | 9.34 | -0.1 | | | 1518 | 9.56 | 9.57 | +0.1 | +--------+--------+------------+------------+---------+ Signed-off-by: VSR Burru <veerasenareddy.burru@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-06 19:45:59 -07:00
g->sg_dma_ptr = lio->glists_dma_base[i] +
(j * lio->glist_entry_size);
list_add_tail(&g->list, &lio->glist[i]);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
}
if (j != lio->tx_qsize) {
delete_glists(lio);
liquidio: improve UDP TX performance Improve UDP TX performance by: * reducing the ring size from 2K to 512 * replacing the numerous streaming DMA allocations for info buffers and gather lists with one large consistent DMA allocation per ring BQL is not effective here. We reduced the ring size because there is heavy overhead with dma_map_single every so often. With iommu=on, dma_map_single in PF Tx data path was taking longer time (~700usec) for every ~250 packets. Debugged intel_iommu code, and found that PF driver is utilizing too many static IO virtual address mapping entries (for gather list entries and info buffers): about 100K entries for two PF's each using 8 rings. Also, finding an empty entry (in rbtree of device domain's iova mapping in kernel) during Tx path becomes a bottleneck every so often; the loop to find the empty entry goes through over 40K iterations; this is too costly and was the major overhead. Overhead is low when this loop quits quickly. Netperf benchmark numbers before and after patch: PF UDP TX +--------+--------+------------+------------+---------+ | | | Before | After | | | Number | | Patch | Patch | | | of | Packet | Throughput | Throughput | Percent | | Flows | Size | (Gbps) | (Gbps) | Change | +--------+--------+------------+------------+---------+ | | 360 | 0.52 | 0.93 | +78.9 | | 1 | 1024 | 1.62 | 2.84 | +75.3 | | | 1518 | 2.44 | 4.21 | +72.5 | +--------+--------+------------+------------+---------+ | | 360 | 0.45 | 1.59 | +253.3 | | 4 | 1024 | 1.34 | 5.48 | +308.9 | | | 1518 | 2.27 | 8.31 | +266.1 | +--------+--------+------------+------------+---------+ | | 360 | 0.40 | 1.61 | +302.5 | | 8 | 1024 | 1.64 | 4.24 | +158.5 | | | 1518 | 2.87 | 6.52 | +127.2 | +--------+--------+------------+------------+---------+ VF UDP TX +--------+--------+------------+------------+---------+ | | | Before | After | | | Number | | Patch | Patch | | | of | Packet | Throughput | Throughput | Percent | | Flows | Size | (Gbps) | (Gbps) | Change | +--------+--------+------------+------------+---------+ | | 360 | 1.28 | 1.49 | +16.4 | | 1 | 1024 | 4.44 | 4.39 | -1.1 | | | 1518 | 6.08 | 6.51 | +7.1 | +--------+--------+------------+------------+---------+ | | 360 | 2.35 | 2.35 | 0.0 | | 4 | 1024 | 6.41 | 8.07 | +25.9 | | | 1518 | 9.56 | 9.54 | -0.2 | +--------+--------+------------+------------+---------+ | | 360 | 3.41 | 3.65 | +7.0 | | 8 | 1024 | 9.35 | 9.34 | -0.1 | | | 1518 | 9.56 | 9.57 | +0.1 | +--------+--------+------------+------------+---------+ Signed-off-by: VSR Burru <veerasenareddy.burru@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-06 19:45:59 -07:00
return -ENOMEM;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
}
}
return 0;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
}
/**
* \brief Print link information
* @param netdev network device
*/
static void print_link_info(struct net_device *netdev)
{
struct lio *lio = GET_LIO(netdev);
if (atomic_read(&lio->ifstate) & LIO_IFSTATE_REGISTERED) {
struct oct_link_info *linfo = &lio->linfo;
if (linfo->link.s.link_up) {
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
netif_info(lio, link, lio->netdev, "%d Mbps %s Duplex UP\n",
linfo->link.s.speed,
(linfo->link.s.duplex) ? "Full" : "Half");
} else {
netif_info(lio, link, lio->netdev, "Link Down\n");
}
}
}
/**
* \brief Routine to notify MTU change
* @param work work_struct data structure
*/
static void octnet_link_status_change(struct work_struct *work)
{
struct cavium_wk *wk = (struct cavium_wk *)work;
struct lio *lio = (struct lio *)wk->ctxptr;
rtnl_lock();
call_netdevice_notifiers(NETDEV_CHANGEMTU, lio->netdev);
rtnl_unlock();
}
/**
* \brief Sets up the mtu status change work
* @param netdev network device
*/
static inline int setup_link_status_change_wq(struct net_device *netdev)
{
struct lio *lio = GET_LIO(netdev);
struct octeon_device *oct = lio->oct_dev;
lio->link_status_wq.wq = alloc_workqueue("link-status",
WQ_MEM_RECLAIM, 0);
if (!lio->link_status_wq.wq) {
dev_err(&oct->pci_dev->dev, "unable to create cavium link status wq\n");
return -1;
}
INIT_DELAYED_WORK(&lio->link_status_wq.wk.work,
octnet_link_status_change);
lio->link_status_wq.wk.ctxptr = lio;
return 0;
}
static inline void cleanup_link_status_change_wq(struct net_device *netdev)
{
struct lio *lio = GET_LIO(netdev);
if (lio->link_status_wq.wq) {
cancel_delayed_work_sync(&lio->link_status_wq.wk.work);
destroy_workqueue(lio->link_status_wq.wq);
}
}
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
/**
* \brief Update link status
* @param netdev network device
* @param ls link status structure
*
* Called on receipt of a link status response from the core application to
* update each interface's link status.
*/
static inline void update_link_status(struct net_device *netdev,
union oct_link_status *ls)
{
struct lio *lio = GET_LIO(netdev);
int changed = (lio->linfo.link.u64 != ls->u64);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
lio->linfo.link.u64 = ls->u64;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
if ((lio->intf_open) && (changed)) {
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
print_link_info(netdev);
lio->link_changes++;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
if (lio->linfo.link.s.link_up) {
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
netif_carrier_on(netdev);
txqs_wake(netdev);
} else {
netif_carrier_off(netdev);
stop_txq(netdev);
}
}
}
/* Runs in interrupt context. */
static void update_txq_status(struct octeon_device *oct, int iq_num)
{
struct net_device *netdev;
struct lio *lio;
struct octeon_instr_queue *iq = oct->instr_queue[iq_num];
netdev = oct->props[iq->ifidx].netdev;
/* This is needed because the first IQ does not have
* a netdev associated with it.
*/
if (!netdev)
return;
lio = GET_LIO(netdev);
if (netif_is_multiqueue(netdev)) {
if (__netif_subqueue_stopped(netdev, iq->q_index) &&
lio->linfo.link.s.link_up &&
(!octnet_iq_is_full(oct, iq_num))) {
INCR_INSTRQUEUE_PKT_COUNT(lio->oct_dev, iq_num,
tx_restart, 1);
netif_wake_subqueue(netdev, iq->q_index);
}
} else if (netif_queue_stopped(netdev) &&
lio->linfo.link.s.link_up &&
(!octnet_iq_is_full(oct, lio->txq))) {
INCR_INSTRQUEUE_PKT_COUNT(lio->oct_dev,
lio->txq, tx_restart, 1);
netif_wake_queue(netdev);
}
}
static
int liquidio_schedule_msix_droq_pkt_handler(struct octeon_droq *droq, u64 ret)
{
struct octeon_device *oct = droq->oct_dev;
struct octeon_device_priv *oct_priv =
(struct octeon_device_priv *)oct->priv;
if (droq->ops.poll_mode) {
droq->ops.napi_fn(droq);
} else {
if (ret & MSIX_PO_INT) {
tasklet_schedule(&oct_priv->droq_tasklet);
return 1;
}
/* this will be flushed periodically by check iq db */
if (ret & MSIX_PI_INT)
return 0;
}
return 0;
}
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
/**
* \brief Droq packet processor sceduler
* @param oct octeon device
*/
static void liquidio_schedule_droq_pkt_handlers(struct octeon_device *oct)
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
{
struct octeon_device_priv *oct_priv =
(struct octeon_device_priv *)oct->priv;
u64 oq_no;
struct octeon_droq *droq;
if (oct->int_status & OCT_DEV_INTR_PKT_DATA) {
for (oq_no = 0; oq_no < MAX_OCTEON_OUTPUT_QUEUES(oct);
oq_no++) {
if (!(oct->droq_intr & BIT_ULL(oq_no)))
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
continue;
droq = oct->droq[oq_no];
if (droq->ops.poll_mode) {
droq->ops.napi_fn(droq);
oct_priv->napi_mask |= (1 << oq_no);
} else {
tasklet_schedule(&oct_priv->droq_tasklet);
}
}
}
}
static irqreturn_t
liquidio_msix_intr_handler(int irq __attribute__((unused)), void *dev)
{
u64 ret;
struct octeon_ioq_vector *ioq_vector = (struct octeon_ioq_vector *)dev;
struct octeon_device *oct = ioq_vector->oct_dev;
struct octeon_droq *droq = oct->droq[ioq_vector->droq_index];
ret = oct->fn_list.msix_interrupt_handler(ioq_vector);
if ((ret & MSIX_PO_INT) || (ret & MSIX_PI_INT))
liquidio_schedule_msix_droq_pkt_handler(droq, ret);
return IRQ_HANDLED;
}
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
/**
* \brief Interrupt handler for octeon
* @param irq unused
* @param dev octeon device
*/
static
irqreturn_t liquidio_legacy_intr_handler(int irq __attribute__((unused)),
void *dev)
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
{
struct octeon_device *oct = (struct octeon_device *)dev;
irqreturn_t ret;
/* Disable our interrupts for the duration of ISR */
oct->fn_list.disable_interrupt(oct, OCTEON_ALL_INTR);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
ret = oct->fn_list.process_interrupt_regs(oct);
if (ret == IRQ_HANDLED)
liquidio_schedule_droq_pkt_handlers(oct);
/* Re-enable our interrupts */
if (!(atomic_read(&oct->status) == OCT_DEV_IN_RESET))
oct->fn_list.enable_interrupt(oct, OCTEON_ALL_INTR);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
return ret;
}
/**
* \brief Setup interrupt for octeon device
* @param oct octeon device
*
* Enable interrupt in Octeon device as given in the PCI interrupt mask.
*/
static int octeon_setup_interrupt(struct octeon_device *oct)
{
int irqret, err;
struct msix_entry *msix_entries;
int i;
int num_ioq_vectors;
int num_alloc_ioq_vectors;
char *queue_irq_names = NULL;
char *aux_irq_name = NULL;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
if (OCTEON_CN23XX_PF(oct) && oct->msix_on) {
oct->num_msix_irqs = oct->sriov_info.num_pf_rings;
/* one non ioq interrupt for handling sli_mac_pf_int_sum */
oct->num_msix_irqs += 1;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
/* allocate storage for the names assigned to each irq */
oct->irq_name_storage =
kcalloc((MAX_IOQ_INTERRUPTS_PER_PF + 1), INTRNAMSIZ,
GFP_KERNEL);
if (!oct->irq_name_storage) {
dev_err(&oct->pci_dev->dev, "Irq name storage alloc failed...\n");
return -ENOMEM;
}
queue_irq_names = oct->irq_name_storage;
aux_irq_name = &queue_irq_names
[IRQ_NAME_OFF(MAX_IOQ_INTERRUPTS_PER_PF)];
oct->msix_entries = kcalloc(
oct->num_msix_irqs, sizeof(struct msix_entry), GFP_KERNEL);
if (!oct->msix_entries) {
dev_err(&oct->pci_dev->dev, "Memory Alloc failed...\n");
kfree(oct->irq_name_storage);
oct->irq_name_storage = NULL;
return -ENOMEM;
}
msix_entries = (struct msix_entry *)oct->msix_entries;
/*Assumption is that pf msix vectors start from pf srn to pf to
* trs and not from 0. if not change this code
*/
for (i = 0; i < oct->num_msix_irqs - 1; i++)
msix_entries[i].entry = oct->sriov_info.pf_srn + i;
msix_entries[oct->num_msix_irqs - 1].entry =
oct->sriov_info.trs;
num_alloc_ioq_vectors = pci_enable_msix_range(
oct->pci_dev, msix_entries,
oct->num_msix_irqs,
oct->num_msix_irqs);
if (num_alloc_ioq_vectors < 0) {
dev_err(&oct->pci_dev->dev, "unable to Allocate MSI-X interrupts\n");
kfree(oct->msix_entries);
oct->msix_entries = NULL;
kfree(oct->irq_name_storage);
oct->irq_name_storage = NULL;
return num_alloc_ioq_vectors;
}
dev_dbg(&oct->pci_dev->dev, "OCTEON: Enough MSI-X interrupts are allocated...\n");
num_ioq_vectors = oct->num_msix_irqs;
/** For PF, there is one non-ioq interrupt handler */
num_ioq_vectors -= 1;
snprintf(aux_irq_name, INTRNAMSIZ,
"LiquidIO%u-pf%u-aux", oct->octeon_id, oct->pf_num);
irqret = request_irq(msix_entries[num_ioq_vectors].vector,
liquidio_legacy_intr_handler, 0,
aux_irq_name, oct);
if (irqret) {
dev_err(&oct->pci_dev->dev,
"OCTEON: Request_irq failed for MSIX interrupt Error: %d\n",
irqret);
pci_disable_msix(oct->pci_dev);
kfree(oct->msix_entries);
oct->msix_entries = NULL;
kfree(oct->irq_name_storage);
oct->irq_name_storage = NULL;
return irqret;
}
for (i = 0; i < num_ioq_vectors; i++) {
snprintf(&queue_irq_names[IRQ_NAME_OFF(i)], INTRNAMSIZ,
"LiquidIO%u-pf%u-rxtx-%u",
oct->octeon_id, oct->pf_num, i);
irqret = request_irq(msix_entries[i].vector,
liquidio_msix_intr_handler, 0,
&queue_irq_names[IRQ_NAME_OFF(i)],
&oct->ioq_vector[i]);
if (irqret) {
dev_err(&oct->pci_dev->dev,
"OCTEON: Request_irq failed for MSIX interrupt Error: %d\n",
irqret);
/** Freeing the non-ioq irq vector here . */
free_irq(msix_entries[num_ioq_vectors].vector,
oct);
while (i) {
i--;
/** clearing affinity mask. */
irq_set_affinity_hint(
msix_entries[i].vector, NULL);
free_irq(msix_entries[i].vector,
&oct->ioq_vector[i]);
}
pci_disable_msix(oct->pci_dev);
kfree(oct->msix_entries);
oct->msix_entries = NULL;
kfree(oct->irq_name_storage);
oct->irq_name_storage = NULL;
return irqret;
}
oct->ioq_vector[i].vector = msix_entries[i].vector;
/* assign the cpu mask for this msix interrupt vector */
irq_set_affinity_hint(
msix_entries[i].vector,
(&oct->ioq_vector[i].affinity_mask));
}
dev_dbg(&oct->pci_dev->dev, "OCTEON[%d]: MSI-X enabled\n",
oct->octeon_id);
} else {
err = pci_enable_msi(oct->pci_dev);
if (err)
dev_warn(&oct->pci_dev->dev, "Reverting to legacy interrupts. Error: %d\n",
err);
else
oct->flags |= LIO_FLAG_MSI_ENABLED;
/* allocate storage for the names assigned to the irq */
oct->irq_name_storage = kcalloc(1, INTRNAMSIZ, GFP_KERNEL);
if (!oct->irq_name_storage)
return -ENOMEM;
queue_irq_names = oct->irq_name_storage;
snprintf(&queue_irq_names[IRQ_NAME_OFF(0)], INTRNAMSIZ,
"LiquidIO%u-pf%u-rxtx-%u",
oct->octeon_id, oct->pf_num, 0);
irqret = request_irq(oct->pci_dev->irq,
liquidio_legacy_intr_handler,
IRQF_SHARED,
&queue_irq_names[IRQ_NAME_OFF(0)], oct);
if (irqret) {
if (oct->flags & LIO_FLAG_MSI_ENABLED)
pci_disable_msi(oct->pci_dev);
dev_err(&oct->pci_dev->dev, "Request IRQ failed with code: %d\n",
irqret);
kfree(oct->irq_name_storage);
oct->irq_name_storage = NULL;
return irqret;
}
}
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
return 0;
}
liquidio: fix Octeon core watchdog timeout false alarm Detection of watchdog timeout of Octeon cores is flawed and susceptible to false alarms. Refactor by removing the detection code, and in its place, leverage existing code that monitors for an indication from the NIC firmware that an Octeon core crashed; expand the meaning of the indication to "an Octeon core crashed or its watchdog timer expired". Detection of watchdog timeout is now delegated to an exception handler in the NIC firmware; this is free of false alarms. Also if there's an Octeon core crash or watchdog timeout: (1) Disable VF Ethernet links. (2) Decrement the module refcount by an amount equal to the number of active VFs of the NIC whose Octeon core crashed or had a watchdog timeout. The refcount will continue to reflect the active VFs of other liquidio NIC(s) (if present) whose Octeon cores are faultless. Item (2) is needed to avoid the case of not being able to unload the driver because the module refcount is stuck at some non-zero number. There is code that, in normal cases, decrements the refcount upon receiving a message from the firmware that a VF driver was unloaded. But in exceptional cases like an Octeon core crash or watchdog timeout, arrival of that particular message from the firmware might be unreliable. That normal case code is changed to not touch the refcount in the exceptional case to avoid contention (over the refcount) with the liquidio_watchdog kernel thread who will carry out item (2). Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-04 20:26:57 -06:00
static struct octeon_device *get_other_octeon_device(struct octeon_device *oct)
{
struct octeon_device *other_oct;
other_oct = lio_get_device(oct->octeon_id + 1);
if (other_oct && other_oct->pci_dev) {
int oct_busnum, other_oct_busnum;
oct_busnum = oct->pci_dev->bus->number;
other_oct_busnum = other_oct->pci_dev->bus->number;
if (oct_busnum == other_oct_busnum) {
int oct_slot, other_oct_slot;
oct_slot = PCI_SLOT(oct->pci_dev->devfn);
other_oct_slot = PCI_SLOT(other_oct->pci_dev->devfn);
if (oct_slot == other_oct_slot)
return other_oct;
}
}
return NULL;
}
static void disable_all_vf_links(struct octeon_device *oct)
{
struct net_device *netdev;
int max_vfs, vf, i;
if (!oct)
return;
max_vfs = oct->sriov_info.max_vfs;
for (i = 0; i < oct->ifcount; i++) {
netdev = oct->props[i].netdev;
if (!netdev)
continue;
for (vf = 0; vf < max_vfs; vf++)
liquidio_set_vf_link_state(netdev, vf,
IFLA_VF_LINK_STATE_DISABLE);
}
}
static int liquidio_watchdog(void *param)
{
liquidio: fix Octeon core watchdog timeout false alarm Detection of watchdog timeout of Octeon cores is flawed and susceptible to false alarms. Refactor by removing the detection code, and in its place, leverage existing code that monitors for an indication from the NIC firmware that an Octeon core crashed; expand the meaning of the indication to "an Octeon core crashed or its watchdog timer expired". Detection of watchdog timeout is now delegated to an exception handler in the NIC firmware; this is free of false alarms. Also if there's an Octeon core crash or watchdog timeout: (1) Disable VF Ethernet links. (2) Decrement the module refcount by an amount equal to the number of active VFs of the NIC whose Octeon core crashed or had a watchdog timeout. The refcount will continue to reflect the active VFs of other liquidio NIC(s) (if present) whose Octeon cores are faultless. Item (2) is needed to avoid the case of not being able to unload the driver because the module refcount is stuck at some non-zero number. There is code that, in normal cases, decrements the refcount upon receiving a message from the firmware that a VF driver was unloaded. But in exceptional cases like an Octeon core crash or watchdog timeout, arrival of that particular message from the firmware might be unreliable. That normal case code is changed to not touch the refcount in the exceptional case to avoid contention (over the refcount) with the liquidio_watchdog kernel thread who will carry out item (2). Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-04 20:26:57 -06:00
bool err_msg_was_printed[LIO_MAX_CORES];
u16 mask_of_crashed_or_stuck_cores = 0;
bool all_vf_links_are_disabled = false;
struct octeon_device *oct = param;
liquidio: fix Octeon core watchdog timeout false alarm Detection of watchdog timeout of Octeon cores is flawed and susceptible to false alarms. Refactor by removing the detection code, and in its place, leverage existing code that monitors for an indication from the NIC firmware that an Octeon core crashed; expand the meaning of the indication to "an Octeon core crashed or its watchdog timer expired". Detection of watchdog timeout is now delegated to an exception handler in the NIC firmware; this is free of false alarms. Also if there's an Octeon core crash or watchdog timeout: (1) Disable VF Ethernet links. (2) Decrement the module refcount by an amount equal to the number of active VFs of the NIC whose Octeon core crashed or had a watchdog timeout. The refcount will continue to reflect the active VFs of other liquidio NIC(s) (if present) whose Octeon cores are faultless. Item (2) is needed to avoid the case of not being able to unload the driver because the module refcount is stuck at some non-zero number. There is code that, in normal cases, decrements the refcount upon receiving a message from the firmware that a VF driver was unloaded. But in exceptional cases like an Octeon core crash or watchdog timeout, arrival of that particular message from the firmware might be unreliable. That normal case code is changed to not touch the refcount in the exceptional case to avoid contention (over the refcount) with the liquidio_watchdog kernel thread who will carry out item (2). Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-04 20:26:57 -06:00
struct octeon_device *other_oct;
#ifdef CONFIG_MODULE_UNLOAD
long refcount, vfs_referencing_pf;
u64 vfs_mask1, vfs_mask2;
#endif
int core;
liquidio: fix Octeon core watchdog timeout false alarm Detection of watchdog timeout of Octeon cores is flawed and susceptible to false alarms. Refactor by removing the detection code, and in its place, leverage existing code that monitors for an indication from the NIC firmware that an Octeon core crashed; expand the meaning of the indication to "an Octeon core crashed or its watchdog timer expired". Detection of watchdog timeout is now delegated to an exception handler in the NIC firmware; this is free of false alarms. Also if there's an Octeon core crash or watchdog timeout: (1) Disable VF Ethernet links. (2) Decrement the module refcount by an amount equal to the number of active VFs of the NIC whose Octeon core crashed or had a watchdog timeout. The refcount will continue to reflect the active VFs of other liquidio NIC(s) (if present) whose Octeon cores are faultless. Item (2) is needed to avoid the case of not being able to unload the driver because the module refcount is stuck at some non-zero number. There is code that, in normal cases, decrements the refcount upon receiving a message from the firmware that a VF driver was unloaded. But in exceptional cases like an Octeon core crash or watchdog timeout, arrival of that particular message from the firmware might be unreliable. That normal case code is changed to not touch the refcount in the exceptional case to avoid contention (over the refcount) with the liquidio_watchdog kernel thread who will carry out item (2). Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-04 20:26:57 -06:00
memset(err_msg_was_printed, 0, sizeof(err_msg_was_printed));
while (!kthread_should_stop()) {
liquidio: fix Octeon core watchdog timeout false alarm Detection of watchdog timeout of Octeon cores is flawed and susceptible to false alarms. Refactor by removing the detection code, and in its place, leverage existing code that monitors for an indication from the NIC firmware that an Octeon core crashed; expand the meaning of the indication to "an Octeon core crashed or its watchdog timer expired". Detection of watchdog timeout is now delegated to an exception handler in the NIC firmware; this is free of false alarms. Also if there's an Octeon core crash or watchdog timeout: (1) Disable VF Ethernet links. (2) Decrement the module refcount by an amount equal to the number of active VFs of the NIC whose Octeon core crashed or had a watchdog timeout. The refcount will continue to reflect the active VFs of other liquidio NIC(s) (if present) whose Octeon cores are faultless. Item (2) is needed to avoid the case of not being able to unload the driver because the module refcount is stuck at some non-zero number. There is code that, in normal cases, decrements the refcount upon receiving a message from the firmware that a VF driver was unloaded. But in exceptional cases like an Octeon core crash or watchdog timeout, arrival of that particular message from the firmware might be unreliable. That normal case code is changed to not touch the refcount in the exceptional case to avoid contention (over the refcount) with the liquidio_watchdog kernel thread who will carry out item (2). Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-04 20:26:57 -06:00
/* sleep for a couple of seconds so that we don't hog the CPU */
set_current_state(TASK_INTERRUPTIBLE);
schedule_timeout(msecs_to_jiffies(2000));
mask_of_crashed_or_stuck_cores =
(u16)octeon_read_csr64(oct, CN23XX_SLI_SCRATCH2);
liquidio: fix Octeon core watchdog timeout false alarm Detection of watchdog timeout of Octeon cores is flawed and susceptible to false alarms. Refactor by removing the detection code, and in its place, leverage existing code that monitors for an indication from the NIC firmware that an Octeon core crashed; expand the meaning of the indication to "an Octeon core crashed or its watchdog timer expired". Detection of watchdog timeout is now delegated to an exception handler in the NIC firmware; this is free of false alarms. Also if there's an Octeon core crash or watchdog timeout: (1) Disable VF Ethernet links. (2) Decrement the module refcount by an amount equal to the number of active VFs of the NIC whose Octeon core crashed or had a watchdog timeout. The refcount will continue to reflect the active VFs of other liquidio NIC(s) (if present) whose Octeon cores are faultless. Item (2) is needed to avoid the case of not being able to unload the driver because the module refcount is stuck at some non-zero number. There is code that, in normal cases, decrements the refcount upon receiving a message from the firmware that a VF driver was unloaded. But in exceptional cases like an Octeon core crash or watchdog timeout, arrival of that particular message from the firmware might be unreliable. That normal case code is changed to not touch the refcount in the exceptional case to avoid contention (over the refcount) with the liquidio_watchdog kernel thread who will carry out item (2). Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-04 20:26:57 -06:00
if (!mask_of_crashed_or_stuck_cores)
continue;
liquidio: fix Octeon core watchdog timeout false alarm Detection of watchdog timeout of Octeon cores is flawed and susceptible to false alarms. Refactor by removing the detection code, and in its place, leverage existing code that monitors for an indication from the NIC firmware that an Octeon core crashed; expand the meaning of the indication to "an Octeon core crashed or its watchdog timer expired". Detection of watchdog timeout is now delegated to an exception handler in the NIC firmware; this is free of false alarms. Also if there's an Octeon core crash or watchdog timeout: (1) Disable VF Ethernet links. (2) Decrement the module refcount by an amount equal to the number of active VFs of the NIC whose Octeon core crashed or had a watchdog timeout. The refcount will continue to reflect the active VFs of other liquidio NIC(s) (if present) whose Octeon cores are faultless. Item (2) is needed to avoid the case of not being able to unload the driver because the module refcount is stuck at some non-zero number. There is code that, in normal cases, decrements the refcount upon receiving a message from the firmware that a VF driver was unloaded. But in exceptional cases like an Octeon core crash or watchdog timeout, arrival of that particular message from the firmware might be unreliable. That normal case code is changed to not touch the refcount in the exceptional case to avoid contention (over the refcount) with the liquidio_watchdog kernel thread who will carry out item (2). Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-04 20:26:57 -06:00
WRITE_ONCE(oct->cores_crashed, true);
other_oct = get_other_octeon_device(oct);
if (other_oct)
WRITE_ONCE(other_oct->cores_crashed, true);
liquidio: fix Octeon core watchdog timeout false alarm Detection of watchdog timeout of Octeon cores is flawed and susceptible to false alarms. Refactor by removing the detection code, and in its place, leverage existing code that monitors for an indication from the NIC firmware that an Octeon core crashed; expand the meaning of the indication to "an Octeon core crashed or its watchdog timer expired". Detection of watchdog timeout is now delegated to an exception handler in the NIC firmware; this is free of false alarms. Also if there's an Octeon core crash or watchdog timeout: (1) Disable VF Ethernet links. (2) Decrement the module refcount by an amount equal to the number of active VFs of the NIC whose Octeon core crashed or had a watchdog timeout. The refcount will continue to reflect the active VFs of other liquidio NIC(s) (if present) whose Octeon cores are faultless. Item (2) is needed to avoid the case of not being able to unload the driver because the module refcount is stuck at some non-zero number. There is code that, in normal cases, decrements the refcount upon receiving a message from the firmware that a VF driver was unloaded. But in exceptional cases like an Octeon core crash or watchdog timeout, arrival of that particular message from the firmware might be unreliable. That normal case code is changed to not touch the refcount in the exceptional case to avoid contention (over the refcount) with the liquidio_watchdog kernel thread who will carry out item (2). Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-04 20:26:57 -06:00
for (core = 0; core < LIO_MAX_CORES; core++) {
bool core_crashed_or_got_stuck;
liquidio: fix Octeon core watchdog timeout false alarm Detection of watchdog timeout of Octeon cores is flawed and susceptible to false alarms. Refactor by removing the detection code, and in its place, leverage existing code that monitors for an indication from the NIC firmware that an Octeon core crashed; expand the meaning of the indication to "an Octeon core crashed or its watchdog timer expired". Detection of watchdog timeout is now delegated to an exception handler in the NIC firmware; this is free of false alarms. Also if there's an Octeon core crash or watchdog timeout: (1) Disable VF Ethernet links. (2) Decrement the module refcount by an amount equal to the number of active VFs of the NIC whose Octeon core crashed or had a watchdog timeout. The refcount will continue to reflect the active VFs of other liquidio NIC(s) (if present) whose Octeon cores are faultless. Item (2) is needed to avoid the case of not being able to unload the driver because the module refcount is stuck at some non-zero number. There is code that, in normal cases, decrements the refcount upon receiving a message from the firmware that a VF driver was unloaded. But in exceptional cases like an Octeon core crash or watchdog timeout, arrival of that particular message from the firmware might be unreliable. That normal case code is changed to not touch the refcount in the exceptional case to avoid contention (over the refcount) with the liquidio_watchdog kernel thread who will carry out item (2). Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-04 20:26:57 -06:00
core_crashed_or_got_stuck =
(mask_of_crashed_or_stuck_cores
>> core) & 1;
if (core_crashed_or_got_stuck &&
!err_msg_was_printed[core]) {
dev_err(&oct->pci_dev->dev,
"ERROR: Octeon core %d crashed or got stuck! See oct-fwdump for details.\n",
core);
err_msg_was_printed[core] = true;
}
}
liquidio: fix Octeon core watchdog timeout false alarm Detection of watchdog timeout of Octeon cores is flawed and susceptible to false alarms. Refactor by removing the detection code, and in its place, leverage existing code that monitors for an indication from the NIC firmware that an Octeon core crashed; expand the meaning of the indication to "an Octeon core crashed or its watchdog timer expired". Detection of watchdog timeout is now delegated to an exception handler in the NIC firmware; this is free of false alarms. Also if there's an Octeon core crash or watchdog timeout: (1) Disable VF Ethernet links. (2) Decrement the module refcount by an amount equal to the number of active VFs of the NIC whose Octeon core crashed or had a watchdog timeout. The refcount will continue to reflect the active VFs of other liquidio NIC(s) (if present) whose Octeon cores are faultless. Item (2) is needed to avoid the case of not being able to unload the driver because the module refcount is stuck at some non-zero number. There is code that, in normal cases, decrements the refcount upon receiving a message from the firmware that a VF driver was unloaded. But in exceptional cases like an Octeon core crash or watchdog timeout, arrival of that particular message from the firmware might be unreliable. That normal case code is changed to not touch the refcount in the exceptional case to avoid contention (over the refcount) with the liquidio_watchdog kernel thread who will carry out item (2). Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-04 20:26:57 -06:00
if (all_vf_links_are_disabled)
continue;
disable_all_vf_links(oct);
disable_all_vf_links(other_oct);
all_vf_links_are_disabled = true;
#ifdef CONFIG_MODULE_UNLOAD
liquidio: fix Octeon core watchdog timeout false alarm Detection of watchdog timeout of Octeon cores is flawed and susceptible to false alarms. Refactor by removing the detection code, and in its place, leverage existing code that monitors for an indication from the NIC firmware that an Octeon core crashed; expand the meaning of the indication to "an Octeon core crashed or its watchdog timer expired". Detection of watchdog timeout is now delegated to an exception handler in the NIC firmware; this is free of false alarms. Also if there's an Octeon core crash or watchdog timeout: (1) Disable VF Ethernet links. (2) Decrement the module refcount by an amount equal to the number of active VFs of the NIC whose Octeon core crashed or had a watchdog timeout. The refcount will continue to reflect the active VFs of other liquidio NIC(s) (if present) whose Octeon cores are faultless. Item (2) is needed to avoid the case of not being able to unload the driver because the module refcount is stuck at some non-zero number. There is code that, in normal cases, decrements the refcount upon receiving a message from the firmware that a VF driver was unloaded. But in exceptional cases like an Octeon core crash or watchdog timeout, arrival of that particular message from the firmware might be unreliable. That normal case code is changed to not touch the refcount in the exceptional case to avoid contention (over the refcount) with the liquidio_watchdog kernel thread who will carry out item (2). Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-04 20:26:57 -06:00
vfs_mask1 = READ_ONCE(oct->sriov_info.vf_drv_loaded_mask);
vfs_mask2 = READ_ONCE(other_oct->sriov_info.vf_drv_loaded_mask);
liquidio: fix Octeon core watchdog timeout false alarm Detection of watchdog timeout of Octeon cores is flawed and susceptible to false alarms. Refactor by removing the detection code, and in its place, leverage existing code that monitors for an indication from the NIC firmware that an Octeon core crashed; expand the meaning of the indication to "an Octeon core crashed or its watchdog timer expired". Detection of watchdog timeout is now delegated to an exception handler in the NIC firmware; this is free of false alarms. Also if there's an Octeon core crash or watchdog timeout: (1) Disable VF Ethernet links. (2) Decrement the module refcount by an amount equal to the number of active VFs of the NIC whose Octeon core crashed or had a watchdog timeout. The refcount will continue to reflect the active VFs of other liquidio NIC(s) (if present) whose Octeon cores are faultless. Item (2) is needed to avoid the case of not being able to unload the driver because the module refcount is stuck at some non-zero number. There is code that, in normal cases, decrements the refcount upon receiving a message from the firmware that a VF driver was unloaded. But in exceptional cases like an Octeon core crash or watchdog timeout, arrival of that particular message from the firmware might be unreliable. That normal case code is changed to not touch the refcount in the exceptional case to avoid contention (over the refcount) with the liquidio_watchdog kernel thread who will carry out item (2). Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-04 20:26:57 -06:00
vfs_referencing_pf = hweight64(vfs_mask1);
vfs_referencing_pf += hweight64(vfs_mask2);
liquidio: fix Octeon core watchdog timeout false alarm Detection of watchdog timeout of Octeon cores is flawed and susceptible to false alarms. Refactor by removing the detection code, and in its place, leverage existing code that monitors for an indication from the NIC firmware that an Octeon core crashed; expand the meaning of the indication to "an Octeon core crashed or its watchdog timer expired". Detection of watchdog timeout is now delegated to an exception handler in the NIC firmware; this is free of false alarms. Also if there's an Octeon core crash or watchdog timeout: (1) Disable VF Ethernet links. (2) Decrement the module refcount by an amount equal to the number of active VFs of the NIC whose Octeon core crashed or had a watchdog timeout. The refcount will continue to reflect the active VFs of other liquidio NIC(s) (if present) whose Octeon cores are faultless. Item (2) is needed to avoid the case of not being able to unload the driver because the module refcount is stuck at some non-zero number. There is code that, in normal cases, decrements the refcount upon receiving a message from the firmware that a VF driver was unloaded. But in exceptional cases like an Octeon core crash or watchdog timeout, arrival of that particular message from the firmware might be unreliable. That normal case code is changed to not touch the refcount in the exceptional case to avoid contention (over the refcount) with the liquidio_watchdog kernel thread who will carry out item (2). Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-04 20:26:57 -06:00
refcount = module_refcount(THIS_MODULE);
if (refcount >= vfs_referencing_pf) {
while (vfs_referencing_pf) {
module_put(THIS_MODULE);
liquidio: fix Octeon core watchdog timeout false alarm Detection of watchdog timeout of Octeon cores is flawed and susceptible to false alarms. Refactor by removing the detection code, and in its place, leverage existing code that monitors for an indication from the NIC firmware that an Octeon core crashed; expand the meaning of the indication to "an Octeon core crashed or its watchdog timer expired". Detection of watchdog timeout is now delegated to an exception handler in the NIC firmware; this is free of false alarms. Also if there's an Octeon core crash or watchdog timeout: (1) Disable VF Ethernet links. (2) Decrement the module refcount by an amount equal to the number of active VFs of the NIC whose Octeon core crashed or had a watchdog timeout. The refcount will continue to reflect the active VFs of other liquidio NIC(s) (if present) whose Octeon cores are faultless. Item (2) is needed to avoid the case of not being able to unload the driver because the module refcount is stuck at some non-zero number. There is code that, in normal cases, decrements the refcount upon receiving a message from the firmware that a VF driver was unloaded. But in exceptional cases like an Octeon core crash or watchdog timeout, arrival of that particular message from the firmware might be unreliable. That normal case code is changed to not touch the refcount in the exceptional case to avoid contention (over the refcount) with the liquidio_watchdog kernel thread who will carry out item (2). Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-04 20:26:57 -06:00
vfs_referencing_pf--;
}
}
#endif
}
return 0;
}
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
/**
* \brief PCI probe handler
* @param pdev PCI device structure
* @param ent unused
*/
static int
liquidio_probe(struct pci_dev *pdev,
const struct pci_device_id *ent __attribute__((unused)))
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
{
struct octeon_device *oct_dev = NULL;
struct handshake *hs;
oct_dev = octeon_allocate_device(pdev->device,
sizeof(struct octeon_device_priv));
if (!oct_dev) {
dev_err(&pdev->dev, "Unable to allocate device\n");
return -ENOMEM;
}
if (pdev->device == OCTEON_CN23XX_PF_VID)
oct_dev->msix_on = LIO_FLAG_MSIX_ENABLED;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
dev_info(&pdev->dev, "Initializing device %x:%x.\n",
(u32)pdev->vendor, (u32)pdev->device);
/* Assign octeon_device for this device to the private data area. */
pci_set_drvdata(pdev, oct_dev);
/* set linux specific device pointer */
oct_dev->pci_dev = (void *)pdev;
hs = &handshake[oct_dev->octeon_id];
init_completion(&hs->init);
init_completion(&hs->started);
hs->pci_dev = pdev;
if (oct_dev->octeon_id == 0)
/* first LiquidIO NIC is detected */
complete(&first_stage);
if (octeon_device_init(oct_dev)) {
complete(&hs->init);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
liquidio_remove(pdev);
return -ENOMEM;
}
if (OCTEON_CN23XX_PF(oct_dev)) {
u64 scratch1;
u8 bus, device, function;
scratch1 = octeon_read_csr64(oct_dev, CN23XX_SLI_SCRATCH1);
if (!(scratch1 & 4ULL)) {
/* Bit 2 of SLI_SCRATCH_1 is a flag that indicates that
* the lio watchdog kernel thread is running for this
* NIC. Each NIC gets one watchdog kernel thread.
*/
scratch1 |= 4ULL;
octeon_write_csr64(oct_dev, CN23XX_SLI_SCRATCH1,
scratch1);
bus = pdev->bus->number;
device = PCI_SLOT(pdev->devfn);
function = PCI_FUNC(pdev->devfn);
oct_dev->watchdog_task = kthread_create(
liquidio_watchdog, oct_dev,
"liowd/%02hhx:%02hhx.%hhx", bus, device, function);
if (!IS_ERR(oct_dev->watchdog_task)) {
wake_up_process(oct_dev->watchdog_task);
} else {
oct_dev->watchdog_task = NULL;
dev_err(&oct_dev->pci_dev->dev,
"failed to create kernel_thread\n");
liquidio_remove(pdev);
return -1;
}
}
}
oct_dev->rx_pause = 1;
oct_dev->tx_pause = 1;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
dev_dbg(&oct_dev->pci_dev->dev, "Device is ready\n");
return 0;
}
static bool fw_type_is_none(void)
{
return strncmp(fw_type, LIO_FW_NAME_TYPE_NONE,
sizeof(LIO_FW_NAME_TYPE_NONE)) == 0;
}
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
/**
*\brief Destroy resources associated with octeon device
* @param pdev PCI device structure
* @param ent unused
*/
static void octeon_destroy_resources(struct octeon_device *oct)
{
int i, refcount;
struct msix_entry *msix_entries;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
struct octeon_device_priv *oct_priv =
(struct octeon_device_priv *)oct->priv;
struct handshake *hs;
switch (atomic_read(&oct->status)) {
case OCT_DEV_RUNNING:
case OCT_DEV_CORE_OK:
/* No more instructions will be forwarded. */
atomic_set(&oct->status, OCT_DEV_IN_RESET);
oct->app_mode = CVM_DRV_INVALID_APP;
dev_dbg(&oct->pci_dev->dev, "Device state is now %s\n",
lio_get_state_string(&oct->status));
schedule_timeout_uninterruptible(HZ / 10);
/* fallthrough */
case OCT_DEV_HOST_OK:
/* fallthrough */
case OCT_DEV_CONSOLE_INIT_DONE:
/* Remove any consoles */
octeon_remove_consoles(oct);
/* fallthrough */
case OCT_DEV_IO_QUEUES_DONE:
if (wait_for_pending_requests(oct))
dev_err(&oct->pci_dev->dev, "There were pending requests\n");
if (lio_wait_for_instr_fetch(oct))
dev_err(&oct->pci_dev->dev, "IQ had pending instructions\n");
/* Disable the input and output queues now. No more packets will
* arrive from Octeon, but we should wait for all packet
* processing to finish.
*/
oct->fn_list.disable_io_queues(oct);
if (lio_wait_for_oq_pkts(oct))
dev_err(&oct->pci_dev->dev, "OQ had pending packets\n");
/* fallthrough */
case OCT_DEV_INTR_SET_DONE:
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
/* Disable interrupts */
oct->fn_list.disable_interrupt(oct, OCTEON_ALL_INTR);
if (oct->msix_on) {
msix_entries = (struct msix_entry *)oct->msix_entries;
for (i = 0; i < oct->num_msix_irqs - 1; i++) {
/* clear the affinity_cpumask */
irq_set_affinity_hint(msix_entries[i].vector,
NULL);
free_irq(msix_entries[i].vector,
&oct->ioq_vector[i]);
}
/* non-iov vector's argument is oct struct */
free_irq(msix_entries[i].vector, oct);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
pci_disable_msix(oct->pci_dev);
kfree(oct->msix_entries);
oct->msix_entries = NULL;
} else {
/* Release the interrupt line */
free_irq(oct->pci_dev->irq, oct);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
if (oct->flags & LIO_FLAG_MSI_ENABLED)
pci_disable_msi(oct->pci_dev);
}
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
kfree(oct->irq_name_storage);
oct->irq_name_storage = NULL;
/* fallthrough */
case OCT_DEV_MSIX_ALLOC_VECTOR_DONE:
if (OCTEON_CN23XX_PF(oct))
octeon_free_ioq_vector(oct);
/* fallthrough */
case OCT_DEV_MBOX_SETUP_DONE:
if (OCTEON_CN23XX_PF(oct))
oct->fn_list.free_mbox(oct);
/* fallthrough */
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
case OCT_DEV_IN_RESET:
case OCT_DEV_DROQ_INIT_DONE:
/* Wait for any pending operations */
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
mdelay(100);
for (i = 0; i < MAX_OCTEON_OUTPUT_QUEUES(oct); i++) {
if (!(oct->io_qmask.oq & BIT_ULL(i)))
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
continue;
octeon_delete_droq(oct, i);
}
/* Force any pending handshakes to complete */
for (i = 0; i < MAX_OCTEON_DEVICES; i++) {
hs = &handshake[i];
if (hs->pci_dev) {
handshake[oct->octeon_id].init_ok = 0;
complete(&handshake[oct->octeon_id].init);
handshake[oct->octeon_id].started_ok = 0;
complete(&handshake[oct->octeon_id].started);
}
}
/* fallthrough */
case OCT_DEV_RESP_LIST_INIT_DONE:
octeon_delete_response_list(oct);
/* fallthrough */
case OCT_DEV_INSTR_QUEUE_INIT_DONE:
for (i = 0; i < MAX_OCTEON_INSTR_QUEUES(oct); i++) {
if (!(oct->io_qmask.iq & BIT_ULL(i)))
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
continue;
octeon_delete_instr_queue(oct, i);
}
#ifdef CONFIG_PCI_IOV
if (oct->sriov_info.sriov_enabled)
pci_disable_sriov(oct->pci_dev);
#endif
/* fallthrough */
case OCT_DEV_SC_BUFF_POOL_INIT_DONE:
octeon_free_sc_buffer_pool(oct);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
/* fallthrough */
case OCT_DEV_DISPATCH_INIT_DONE:
octeon_delete_dispatch_list(oct);
cancel_delayed_work_sync(&oct->nic_poll_work.work);
/* fallthrough */
case OCT_DEV_PCI_MAP_DONE:
refcount = octeon_deregister_device(oct);
if (!fw_type_is_none()) {
/* Soft reset the octeon device before exiting.
* Implementation note: here, we reset the device
* if it is a CN6XXX OR the last CN23XX device.
*/
if (OCTEON_CN6XXX(oct) || !refcount)
oct->fn_list.soft_reset(oct);
}
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
octeon_unmap_pci_barx(oct, 0);
octeon_unmap_pci_barx(oct, 1);
/* fallthrough */
case OCT_DEV_PCI_ENABLE_DONE:
pci_clear_master(oct->pci_dev);
/* Disable the device, releasing the PCI INT */
pci_disable_device(oct->pci_dev);
/* fallthrough */
case OCT_DEV_BEGIN_STATE:
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
/* Nothing to be done here either */
break;
} /* end switch (oct->status) */
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
tasklet_kill(&oct_priv->droq_tasklet);
}
/**
* \brief Callback for rx ctrl
* @param status status of request
* @param buf pointer to resp structure
*/
static void rx_ctl_callback(struct octeon_device *oct,
u32 status,
void *buf)
{
struct octeon_soft_command *sc = (struct octeon_soft_command *)buf;
struct liquidio_rx_ctl_context *ctx;
ctx = (struct liquidio_rx_ctl_context *)sc->ctxptr;
oct = lio_get_device(ctx->octeon_id);
if (status)
dev_err(&oct->pci_dev->dev, "rx ctl instruction failed. Status: %llx\n",
CVM_CAST64(status));
WRITE_ONCE(ctx->cond, 1);
/* This barrier is required to be sure that the response has been
* written fully before waking up the handler
*/
wmb();
wake_up_interruptible(&ctx->wc);
}
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
/**
* \brief Send Rx control command
* @param lio per-network private data
* @param start_stop whether to start or stop
*/
static void send_rx_ctrl_cmd(struct lio *lio, int start_stop)
{
struct octeon_soft_command *sc;
struct liquidio_rx_ctl_context *ctx;
union octnet_cmd *ncmd;
int ctx_size = sizeof(struct liquidio_rx_ctl_context);
struct octeon_device *oct = (struct octeon_device *)lio->oct_dev;
int retval;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
if (oct->props[lio->ifidx].rx_on == start_stop)
return;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
sc = (struct octeon_soft_command *)
octeon_alloc_soft_command(oct, OCTNET_CMD_SIZE,
16, ctx_size);
ncmd = (union octnet_cmd *)sc->virtdptr;
ctx = (struct liquidio_rx_ctl_context *)sc->ctxptr;
WRITE_ONCE(ctx->cond, 0);
ctx->octeon_id = lio_get_device_id(oct);
init_waitqueue_head(&ctx->wc);
ncmd->u64 = 0;
ncmd->s.cmd = OCTNET_CMD_RX_CTL;
ncmd->s.param1 = start_stop;
octeon_swap_8B_data((u64 *)ncmd, (OCTNET_CMD_SIZE >> 3));
sc->iq_no = lio->linfo.txpciq[0].s.q_no;
octeon_prepare_soft_command(oct, sc, OPCODE_NIC,
OPCODE_NIC_CMD, 0, 0, 0);
sc->callback = rx_ctl_callback;
sc->callback_arg = sc;
sc->wait_time = 5000;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
retval = octeon_send_soft_command(oct, sc);
if (retval == IQ_SEND_FAILED) {
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
netif_info(lio, rx_err, lio->netdev, "Failed to send RX Control message\n");
} else {
/* Sleep on a wait queue till the cond flag indicates that the
* response arrived or timed-out.
*/
if (sleep_cond(&ctx->wc, &ctx->cond) == -EINTR)
return;
oct->props[lio->ifidx].rx_on = start_stop;
}
octeon_free_soft_command(oct, sc);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
}
/**
* \brief Destroy NIC device interface
* @param oct octeon device
* @param ifidx which interface to destroy
*
* Cleanup associated with each interface for an Octeon device when NIC
* module is being unloaded or if initialization fails during load.
*/
static void liquidio_destroy_nic_device(struct octeon_device *oct, int ifidx)
{
struct net_device *netdev = oct->props[ifidx].netdev;
struct lio *lio;
struct napi_struct *napi, *n;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
if (!netdev) {
dev_err(&oct->pci_dev->dev, "%s No netdevice ptr for index %d\n",
__func__, ifidx);
return;
}
lio = GET_LIO(netdev);
dev_dbg(&oct->pci_dev->dev, "NIC device cleanup\n");
if (atomic_read(&lio->ifstate) & LIO_IFSTATE_RUNNING)
liquidio_stop(netdev);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
if (fw_type_is_none()) {
struct octnic_ctrl_pkt nctrl;
memset(&nctrl, 0, sizeof(struct octnic_ctrl_pkt));
nctrl.ncmd.s.cmd = OCTNET_CMD_RESET_PF;
nctrl.iq_no = lio->linfo.txpciq[0].s.q_no;
octnet_send_nic_ctrl_pkt(oct, &nctrl);
}
if (oct->props[lio->ifidx].napi_enabled == 1) {
list_for_each_entry_safe(napi, n, &netdev->napi_list, dev_list)
napi_disable(napi);
oct->props[lio->ifidx].napi_enabled = 0;
if (OCTEON_CN23XX_PF(oct))
oct->droq[0]->ops.poll_mode = 0;
}
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
if (atomic_read(&lio->ifstate) & LIO_IFSTATE_REGISTERED)
unregister_netdev(netdev);
cleanup_link_status_change_wq(netdev);
cleanup_rx_oom_poll_fn(netdev);
delete_glists(lio);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
free_netdev(netdev);
oct->props[ifidx].gmxport = -1;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
oct->props[ifidx].netdev = NULL;
}
/**
* \brief Stop complete NIC functionality
* @param oct octeon device
*/
static int liquidio_stop_nic_module(struct octeon_device *oct)
{
int i, j;
struct lio *lio;
dev_dbg(&oct->pci_dev->dev, "Stopping network interfaces\n");
if (!oct->ifcount) {
dev_err(&oct->pci_dev->dev, "Init for Octeon was not completed\n");
return 1;
}
spin_lock_bh(&oct->cmd_resp_wqlock);
oct->cmd_resp_state = OCT_DRV_OFFLINE;
spin_unlock_bh(&oct->cmd_resp_wqlock);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
for (i = 0; i < oct->ifcount; i++) {
lio = GET_LIO(oct->props[i].netdev);
for (j = 0; j < lio->linfo.num_rxpciq; j++)
octeon_unregister_droq_ops(oct,
lio->linfo.rxpciq[j].s.q_no);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
}
for (i = 0; i < oct->ifcount; i++)
liquidio_destroy_nic_device(oct, i);
dev_dbg(&oct->pci_dev->dev, "Network interfaces stopped\n");
return 0;
}
/**
* \brief Cleans up resources at unload time
* @param pdev PCI device structure
*/
static void liquidio_remove(struct pci_dev *pdev)
{
struct octeon_device *oct_dev = pci_get_drvdata(pdev);
dev_dbg(&oct_dev->pci_dev->dev, "Stopping device\n");
if (oct_dev->watchdog_task)
kthread_stop(oct_dev->watchdog_task);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
if (oct_dev->app_mode && (oct_dev->app_mode == CVM_DRV_NIC_APP))
liquidio_stop_nic_module(oct_dev);
/* Reset the octeon device and cleanup all memory allocated for
* the octeon device by driver.
*/
octeon_destroy_resources(oct_dev);
dev_info(&oct_dev->pci_dev->dev, "Device removed\n");
/* This octeon device has been removed. Update the global
* data structure to reflect this. Free the device structure.
*/
octeon_free_device_mem(oct_dev);
}
/**
* \brief Identify the Octeon device and to map the BAR address space
* @param oct octeon device
*/
static int octeon_chip_specific_setup(struct octeon_device *oct)
{
u32 dev_id, rev_id;
int ret = 1;
char *s;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
pci_read_config_dword(oct->pci_dev, 0, &dev_id);
pci_read_config_dword(oct->pci_dev, 8, &rev_id);
oct->rev_id = rev_id & 0xff;
switch (dev_id) {
case OCTEON_CN68XX_PCIID:
oct->chip_id = OCTEON_CN68XX;
ret = lio_setup_cn68xx_octeon_device(oct);
s = "CN68XX";
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
break;
case OCTEON_CN66XX_PCIID:
oct->chip_id = OCTEON_CN66XX;
ret = lio_setup_cn66xx_octeon_device(oct);
s = "CN66XX";
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
break;
case OCTEON_CN23XX_PCIID_PF:
oct->chip_id = OCTEON_CN23XX_PF_VID;
ret = setup_cn23xx_octeon_pf_device(oct);
s = "CN23XX";
break;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
default:
s = "?";
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
dev_err(&oct->pci_dev->dev, "Unknown device found (dev_id: %x)\n",
dev_id);
}
if (!ret)
dev_info(&oct->pci_dev->dev, "%s PASS%d.%d %s Version: %s\n", s,
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
OCTEON_MAJOR_REV(oct),
OCTEON_MINOR_REV(oct),
octeon_get_conf(oct)->card_name,
LIQUIDIO_VERSION);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
return ret;
}
/**
* \brief PCI initialization for each Octeon device.
* @param oct octeon device
*/
static int octeon_pci_os_setup(struct octeon_device *oct)
{
/* setup PCI stuff first */
if (pci_enable_device(oct->pci_dev)) {
dev_err(&oct->pci_dev->dev, "pci_enable_device failed\n");
return 1;
}
if (dma_set_mask_and_coherent(&oct->pci_dev->dev, DMA_BIT_MASK(64))) {
dev_err(&oct->pci_dev->dev, "Unexpected DMA device capability\n");
pci_disable_device(oct->pci_dev);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
return 1;
}
/* Enable PCI DMA Master. */
pci_set_master(oct->pci_dev);
return 0;
}
static inline int skb_iq(struct lio *lio, struct sk_buff *skb)
{
int q = 0;
if (netif_is_multiqueue(lio->netdev))
q = skb->queue_mapping % lio->linfo.num_txpciq;
return q;
}
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
/**
* \brief Check Tx queue state for a given network buffer
* @param lio per-network private data
* @param skb network buffer
*/
static inline int check_txq_state(struct lio *lio, struct sk_buff *skb)
{
int q = 0, iq = 0;
if (netif_is_multiqueue(lio->netdev)) {
q = skb->queue_mapping;
iq = lio->linfo.txpciq[(q % (lio->linfo.num_txpciq))].s.q_no;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
} else {
iq = lio->txq;
q = iq;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
}
if (octnet_iq_is_full(lio->oct_dev, iq))
return 0;
if (__netif_subqueue_stopped(lio->netdev, q)) {
INCR_INSTRQUEUE_PKT_COUNT(lio->oct_dev, iq, tx_restart, 1);
wake_q(lio->netdev, q);
}
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
return 1;
}
/**
* \brief Unmap and free network buffer
* @param buf buffer
*/
static void free_netbuf(void *buf)
{
struct sk_buff *skb;
struct octnet_buf_free_info *finfo;
struct lio *lio;
finfo = (struct octnet_buf_free_info *)buf;
skb = finfo->skb;
lio = finfo->lio;
dma_unmap_single(&lio->oct_dev->pci_dev->dev, finfo->dptr, skb->len,
DMA_TO_DEVICE);
check_txq_state(lio, skb);
tx_buffer_free(skb);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
}
/**
* \brief Unmap and free gather buffer
* @param buf buffer
*/
static void free_netsgbuf(void *buf)
{
struct octnet_buf_free_info *finfo;
struct sk_buff *skb;
struct lio *lio;
struct octnic_gather *g;
int i, frags, iq;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
finfo = (struct octnet_buf_free_info *)buf;
skb = finfo->skb;
lio = finfo->lio;
g = finfo->g;
frags = skb_shinfo(skb)->nr_frags;
dma_unmap_single(&lio->oct_dev->pci_dev->dev,
g->sg[0].ptr[0], (skb->len - skb->data_len),
DMA_TO_DEVICE);
i = 1;
while (frags--) {
struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[i - 1];
pci_unmap_page((lio->oct_dev)->pci_dev,
g->sg[(i >> 2)].ptr[(i & 3)],
frag->size, DMA_TO_DEVICE);
i++;
}
iq = skb_iq(lio, skb);
spin_lock(&lio->glist_lock[iq]);
list_add_tail(&g->list, &lio->glist[iq]);
spin_unlock(&lio->glist_lock[iq]);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
check_txq_state(lio, skb); /* mq support: sub-queue state check */
tx_buffer_free(skb);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
}
/**
* \brief Unmap and free gather buffer with response
* @param buf buffer
*/
static void free_netsgbuf_with_resp(void *buf)
{
struct octeon_soft_command *sc;
struct octnet_buf_free_info *finfo;
struct sk_buff *skb;
struct lio *lio;
struct octnic_gather *g;
int i, frags, iq;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
sc = (struct octeon_soft_command *)buf;
skb = (struct sk_buff *)sc->callback_arg;
finfo = (struct octnet_buf_free_info *)&skb->cb;
lio = finfo->lio;
g = finfo->g;
frags = skb_shinfo(skb)->nr_frags;
dma_unmap_single(&lio->oct_dev->pci_dev->dev,
g->sg[0].ptr[0], (skb->len - skb->data_len),
DMA_TO_DEVICE);
i = 1;
while (frags--) {
struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[i - 1];
pci_unmap_page((lio->oct_dev)->pci_dev,
g->sg[(i >> 2)].ptr[(i & 3)],
frag->size, DMA_TO_DEVICE);
i++;
}
iq = skb_iq(lio, skb);
spin_lock(&lio->glist_lock[iq]);
list_add_tail(&g->list, &lio->glist[iq]);
spin_unlock(&lio->glist_lock[iq]);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
/* Don't free the skb yet */
check_txq_state(lio, skb);
}
/**
* \brief Adjust ptp frequency
* @param ptp PTP clock info
* @param ppb how much to adjust by, in parts-per-billion
*/
static int liquidio_ptp_adjfreq(struct ptp_clock_info *ptp, s32 ppb)
{
struct lio *lio = container_of(ptp, struct lio, ptp_info);
struct octeon_device *oct = (struct octeon_device *)lio->oct_dev;
u64 comp, delta;
unsigned long flags;
bool neg_adj = false;
if (ppb < 0) {
neg_adj = true;
ppb = -ppb;
}
/* The hardware adds the clock compensation value to the
* PTP clock on every coprocessor clock cycle, so we
* compute the delta in terms of coprocessor clocks.
*/
delta = (u64)ppb << 32;
do_div(delta, oct->coproc_clock_rate);
spin_lock_irqsave(&lio->ptp_lock, flags);
comp = lio_pci_readq(oct, CN6XXX_MIO_PTP_CLOCK_COMP);
if (neg_adj)
comp -= delta;
else
comp += delta;
lio_pci_writeq(oct, comp, CN6XXX_MIO_PTP_CLOCK_COMP);
spin_unlock_irqrestore(&lio->ptp_lock, flags);
return 0;
}
/**
* \brief Adjust ptp time
* @param ptp PTP clock info
* @param delta how much to adjust by, in nanosecs
*/
static int liquidio_ptp_adjtime(struct ptp_clock_info *ptp, s64 delta)
{
unsigned long flags;
struct lio *lio = container_of(ptp, struct lio, ptp_info);
spin_lock_irqsave(&lio->ptp_lock, flags);
lio->ptp_adjust += delta;
spin_unlock_irqrestore(&lio->ptp_lock, flags);
return 0;
}
/**
* \brief Get hardware clock time, including any adjustment
* @param ptp PTP clock info
* @param ts timespec
*/
static int liquidio_ptp_gettime(struct ptp_clock_info *ptp,
struct timespec64 *ts)
{
u64 ns;
unsigned long flags;
struct lio *lio = container_of(ptp, struct lio, ptp_info);
struct octeon_device *oct = (struct octeon_device *)lio->oct_dev;
spin_lock_irqsave(&lio->ptp_lock, flags);
ns = lio_pci_readq(oct, CN6XXX_MIO_PTP_CLOCK_HI);
ns += lio->ptp_adjust;
spin_unlock_irqrestore(&lio->ptp_lock, flags);
*ts = ns_to_timespec64(ns);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
return 0;
}
/**
* \brief Set hardware clock time. Reset adjustment
* @param ptp PTP clock info
* @param ts timespec
*/
static int liquidio_ptp_settime(struct ptp_clock_info *ptp,
const struct timespec64 *ts)
{
u64 ns;
unsigned long flags;
struct lio *lio = container_of(ptp, struct lio, ptp_info);
struct octeon_device *oct = (struct octeon_device *)lio->oct_dev;
ns = timespec_to_ns(ts);
spin_lock_irqsave(&lio->ptp_lock, flags);
lio_pci_writeq(oct, ns, CN6XXX_MIO_PTP_CLOCK_HI);
lio->ptp_adjust = 0;
spin_unlock_irqrestore(&lio->ptp_lock, flags);
return 0;
}
/**
* \brief Check if PTP is enabled
* @param ptp PTP clock info
* @param rq request
* @param on is it on
*/
static int
liquidio_ptp_enable(struct ptp_clock_info *ptp __attribute__((unused)),
struct ptp_clock_request *rq __attribute__((unused)),
int on __attribute__((unused)))
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
{
return -EOPNOTSUPP;
}
/**
* \brief Open PTP clock source
* @param netdev network device
*/
static void oct_ptp_open(struct net_device *netdev)
{
struct lio *lio = GET_LIO(netdev);
struct octeon_device *oct = (struct octeon_device *)lio->oct_dev;
spin_lock_init(&lio->ptp_lock);
snprintf(lio->ptp_info.name, 16, "%s", netdev->name);
lio->ptp_info.owner = THIS_MODULE;
lio->ptp_info.max_adj = 250000000;
lio->ptp_info.n_alarm = 0;
lio->ptp_info.n_ext_ts = 0;
lio->ptp_info.n_per_out = 0;
lio->ptp_info.pps = 0;
lio->ptp_info.adjfreq = liquidio_ptp_adjfreq;
lio->ptp_info.adjtime = liquidio_ptp_adjtime;
lio->ptp_info.gettime64 = liquidio_ptp_gettime;
lio->ptp_info.settime64 = liquidio_ptp_settime;
lio->ptp_info.enable = liquidio_ptp_enable;
lio->ptp_adjust = 0;
lio->ptp_clock = ptp_clock_register(&lio->ptp_info,
&oct->pci_dev->dev);
if (IS_ERR(lio->ptp_clock))
lio->ptp_clock = NULL;
}
/**
* \brief Init PTP clock
* @param oct octeon device
*/
static void liquidio_ptp_init(struct octeon_device *oct)
{
u64 clock_comp, cfg;
clock_comp = (u64)NSEC_PER_SEC << 32;
do_div(clock_comp, oct->coproc_clock_rate);
lio_pci_writeq(oct, clock_comp, CN6XXX_MIO_PTP_CLOCK_COMP);
/* Enable */
cfg = lio_pci_readq(oct, CN6XXX_MIO_PTP_CLOCK_CFG);
lio_pci_writeq(oct, cfg | 0x01, CN6XXX_MIO_PTP_CLOCK_CFG);
}
/**
* \brief Load firmware to device
* @param oct octeon device
*
* Maps device to firmware filename, requests firmware, and downloads it
*/
static int load_firmware(struct octeon_device *oct)
{
int ret = 0;
const struct firmware *fw;
char fw_name[LIO_MAX_FW_FILENAME_LEN];
char *tmp_fw_type;
if (fw_type_is_none()) {
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
dev_info(&oct->pci_dev->dev, "Skipping firmware load\n");
return ret;
}
if (fw_type[0] == '\0')
tmp_fw_type = LIO_FW_NAME_TYPE_NIC;
else
tmp_fw_type = fw_type;
sprintf(fw_name, "%s%s%s_%s%s", LIO_FW_DIR, LIO_FW_BASE_NAME,
octeon_get_conf(oct)->card_name, tmp_fw_type,
LIO_FW_NAME_SUFFIX);
ret = request_firmware(&fw, fw_name, &oct->pci_dev->dev);
if (ret) {
dev_err(&oct->pci_dev->dev, "Request firmware failed. Could not find file %s.\n.",
fw_name);
release_firmware(fw);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
return ret;
}
ret = octeon_download_firmware(oct, fw->data, fw->size);
release_firmware(fw);
return ret;
}
/**
* \brief Setup output queue
* @param oct octeon device
* @param q_no which queue
* @param num_descs how many descriptors
* @param desc_size size of each descriptor
* @param app_ctx application context
*/
static int octeon_setup_droq(struct octeon_device *oct, int q_no, int num_descs,
int desc_size, void *app_ctx)
{
int ret_val = 0;
dev_dbg(&oct->pci_dev->dev, "Creating Droq: %d\n", q_no);
/* droq creation and local register settings. */
ret_val = octeon_create_droq(oct, q_no, num_descs, desc_size, app_ctx);
if (ret_val < 0)
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
return ret_val;
if (ret_val == 1) {
dev_dbg(&oct->pci_dev->dev, "Using default droq %d\n", q_no);
return 0;
}
/* tasklet creation for the droq */
/* Enable the droq queues */
octeon_set_droq_pkt_op(oct, q_no, 1);
/* Send Credit for Octeon Output queues. Credits are always
* sent after the output queue is enabled.
*/
writel(oct->droq[q_no]->max_count,
oct->droq[q_no]->pkts_credit_reg);
return ret_val;
}
/**
* \brief Callback for getting interface configuration
* @param status status of request
* @param buf pointer to resp structure
*/
static void if_cfg_callback(struct octeon_device *oct,
u32 status __attribute__((unused)),
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
void *buf)
{
struct octeon_soft_command *sc = (struct octeon_soft_command *)buf;
struct liquidio_if_cfg_resp *resp;
struct liquidio_if_cfg_context *ctx;
resp = (struct liquidio_if_cfg_resp *)sc->virtrptr;
ctx = (struct liquidio_if_cfg_context *)sc->ctxptr;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
oct = lio_get_device(ctx->octeon_id);
if (resp->status)
dev_err(&oct->pci_dev->dev, "nic if cfg instruction failed. Status: 0x%llx (0x%08x)\n",
CVM_CAST64(resp->status), status);
WRITE_ONCE(ctx->cond, 1);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
snprintf(oct->fw_info.liquidio_firmware_version, 32, "%s",
resp->cfg_info.liquidio_firmware_version);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
/* This barrier is required to be sure that the response has been
* written fully before waking up the handler
*/
wmb();
wake_up_interruptible(&ctx->wc);
}
/** Routine to push packets arriving on Octeon interface upto network layer.
* @param oct_id - octeon device id.
* @param skbuff - skbuff struct to be passed to network layer.
* @param len - size of total data received.
* @param rh - Control header associated with the packet
* @param param - additional control data with the packet
* @param arg - farg registered in droq_ops
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
*/
static void
liquidio_push_packet(u32 octeon_id __attribute__((unused)),
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
void *skbuff,
u32 len,
union octeon_rh *rh,
void *param,
void *arg)
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
{
struct napi_struct *napi = param;
struct sk_buff *skb = (struct sk_buff *)skbuff;
struct skb_shared_hwtstamps *shhwtstamps;
u64 ns;
u16 vtag = 0;
u32 r_dh_off;
struct net_device *netdev = (struct net_device *)arg;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
struct octeon_droq *droq = container_of(param, struct octeon_droq,
napi);
if (netdev) {
int packet_was_received;
struct lio *lio = GET_LIO(netdev);
struct octeon_device *oct = lio->oct_dev;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
/* Do not proceed if the interface is not in RUNNING state. */
if (!ifstate_check(lio, LIO_IFSTATE_RUNNING)) {
recv_buffer_free(skb);
droq->stats.rx_dropped++;
return;
}
skb->dev = netdev;
skb_record_rx_queue(skb, droq->q_no);
if (likely(len > MIN_SKB_SIZE)) {
struct octeon_skb_page_info *pg_info;
unsigned char *va;
pg_info = ((struct octeon_skb_page_info *)(skb->cb));
if (pg_info->page) {
/* For Paged allocation use the frags */
va = page_address(pg_info->page) +
pg_info->page_offset;
memcpy(skb->data, va, MIN_SKB_SIZE);
skb_put(skb, MIN_SKB_SIZE);
skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags,
pg_info->page,
pg_info->page_offset +
MIN_SKB_SIZE,
len - MIN_SKB_SIZE,
LIO_RXBUFFER_SZ);
}
} else {
struct octeon_skb_page_info *pg_info =
((struct octeon_skb_page_info *)(skb->cb));
skb_copy_to_linear_data(skb, page_address(pg_info->page)
+ pg_info->page_offset, len);
skb_put(skb, len);
put_page(pg_info->page);
}
r_dh_off = (rh->r_dh.len - 1) * BYTES_PER_DHLEN_UNIT;
if (((oct->chip_id == OCTEON_CN66XX) ||
(oct->chip_id == OCTEON_CN68XX)) &&
ptp_enable) {
if (rh->r_dh.has_hwtstamp) {
/* timestamp is included from the hardware at
* the beginning of the packet.
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
*/
if (ifstate_check
(lio, LIO_IFSTATE_RX_TIMESTAMP_ENABLED)) {
/* Nanoseconds are in the first 64-bits
* of the packet.
*/
memcpy(&ns, (skb->data + r_dh_off),
sizeof(ns));
r_dh_off -= BYTES_PER_DHLEN_UNIT;
shhwtstamps = skb_hwtstamps(skb);
shhwtstamps->hwtstamp =
ns_to_ktime(ns +
lio->ptp_adjust);
}
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
}
}
if (rh->r_dh.has_hash) {
__be32 *hash_be = (__be32 *)(skb->data + r_dh_off);
u32 hash = be32_to_cpu(*hash_be);
skb_set_hash(skb, hash, PKT_HASH_TYPE_L4);
r_dh_off -= BYTES_PER_DHLEN_UNIT;
}
skb_pull(skb, rh->r_dh.len * BYTES_PER_DHLEN_UNIT);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
skb->protocol = eth_type_trans(skb, skb->dev);
if ((netdev->features & NETIF_F_RXCSUM) &&
(((rh->r_dh.encap_on) &&
(rh->r_dh.csum_verified & CNNIC_TUN_CSUM_VERIFIED)) ||
(!(rh->r_dh.encap_on) &&
(rh->r_dh.csum_verified & CNNIC_CSUM_VERIFIED))))
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
/* checksum has already been verified */
skb->ip_summed = CHECKSUM_UNNECESSARY;
else
skb->ip_summed = CHECKSUM_NONE;
/* Setting Encapsulation field on basis of status received
* from the firmware
*/
if (rh->r_dh.encap_on) {
skb->encapsulation = 1;
skb->csum_level = 1;
droq->stats.rx_vxlan++;
}
/* inbound VLAN tag */
if ((netdev->features & NETIF_F_HW_VLAN_CTAG_RX) &&
(rh->r_dh.vlan != 0)) {
u16 vid = rh->r_dh.vlan;
u16 priority = rh->r_dh.priority;
vtag = priority << 13 | vid;
__vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vtag);
}
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
packet_was_received = napi_gro_receive(napi, skb) != GRO_DROP;
if (packet_was_received) {
droq->stats.rx_bytes_received += len;
droq->stats.rx_pkts_received++;
} else {
droq->stats.rx_dropped++;
netif_info(lio, rx_err, lio->netdev,
"droq:%d error rx_dropped:%llu\n",
droq->q_no, droq->stats.rx_dropped);
}
} else {
recv_buffer_free(skb);
}
}
/**
* \brief wrapper for calling napi_schedule
* @param param parameters to pass to napi_schedule
*
* Used when scheduling on different CPUs
*/
static void napi_schedule_wrapper(void *param)
{
struct napi_struct *napi = param;
napi_schedule(napi);
}
/**
* \brief callback when receive interrupt occurs and we are in NAPI mode
* @param arg pointer to octeon output queue
*/
static void liquidio_napi_drv_callback(void *arg)
{
struct octeon_device *oct;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
struct octeon_droq *droq = arg;
int this_cpu = smp_processor_id();
oct = droq->oct_dev;
if (OCTEON_CN23XX_PF(oct) || droq->cpu_id == this_cpu) {
napi_schedule_irqoff(&droq->napi);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
} else {
smp: Avoid using two cache lines for struct call_single_data struct call_single_data is used in IPIs to transfer information between CPUs. Its size is bigger than sizeof(unsigned long) and less than cache line size. Currently it is not allocated with any explicit alignment requirements. This makes it possible for allocated call_single_data to cross two cache lines, which results in double the number of the cache lines that need to be transferred among CPUs. This can be fixed by requiring call_single_data to be aligned with the size of call_single_data. Currently the size of call_single_data is the power of 2. If we add new fields to call_single_data, we may need to add padding to make sure the size of new definition is the power of 2 as well. Fortunately, this is enforced by GCC, which will report bad sizes. To set alignment requirements of call_single_data to the size of call_single_data, a struct definition and a typedef is used. To test the effect of the patch, I used the vm-scalability multiple thread swap test case (swap-w-seq-mt). The test will create multiple threads and each thread will eat memory until all RAM and part of swap is used, so that huge number of IPIs are triggered when unmapping memory. In the test, the throughput of memory writing improves ~5% compared with misaligned call_single_data, because of faster IPIs. Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Huang, Ying <ying.huang@intel.com> [ Add call_single_data_t and align with size of call_single_data. ] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/87bmnqd6lz.fsf@yhuang-mobile.sh.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-07 22:30:00 -06:00
call_single_data_t *csd = &droq->csd;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
csd->func = napi_schedule_wrapper;
csd->info = &droq->napi;
csd->flags = 0;
smp_call_function_single_async(droq->cpu_id, csd);
}
}
/**
* \brief Entry point for NAPI polling
* @param napi NAPI structure
* @param budget maximum number of items to process
*/
static int liquidio_napi_poll(struct napi_struct *napi, int budget)
{
struct octeon_droq *droq;
int work_done;
int tx_done = 0, iq_no;
struct octeon_instr_queue *iq;
struct octeon_device *oct;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
droq = container_of(napi, struct octeon_droq, napi);
oct = droq->oct_dev;
iq_no = droq->q_no;
/* Handle Droq descriptors */
work_done = octeon_process_droq_poll_cmd(oct, droq->q_no,
POLL_EVENT_PROCESS_PKTS,
budget);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
/* Flush the instruction queue */
iq = oct->instr_queue[iq_no];
if (iq) {
if (atomic_read(&iq->instr_pending))
/* Process iq buffers with in the budget limits */
tx_done = octeon_flush_iq(oct, iq, budget);
else
tx_done = 1;
/* Update iq read-index rather than waiting for next interrupt.
* Return back if tx_done is false.
*/
update_txq_status(oct, iq_no);
} else {
dev_err(&oct->pci_dev->dev, "%s: iq (%d) num invalid\n",
__func__, iq_no);
}
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
/* force enable interrupt if reg cnts are high to avoid wraparound */
if ((work_done < budget && tx_done) ||
(iq && iq->pkt_in_done >= MAX_REG_CNT) ||
(droq->pkt_count >= MAX_REG_CNT)) {
tx_done = 1;
napi_complete_done(napi, work_done);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
octeon_process_droq_poll_cmd(droq->oct_dev, droq->q_no,
POLL_EVENT_ENABLE_INTR, 0);
return 0;
}
return (!tx_done) ? (budget) : (work_done);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
}
/**
* \brief Setup input and output queues
* @param octeon_dev octeon device
* @param ifidx Interface Index
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
*
* Note: Queues are with respect to the octeon device. Thus
* an input queue is for egress packets, and output queues
* are for ingress packets.
*/
static inline int setup_io_queues(struct octeon_device *octeon_dev,
int ifidx)
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
{
struct octeon_droq_ops droq_ops;
struct net_device *netdev;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
static int cpu_id;
static int cpu_id_modulus;
struct octeon_droq *droq;
struct napi_struct *napi;
int q, q_no, retval = 0;
struct lio *lio;
int num_tx_descs;
netdev = octeon_dev->props[ifidx].netdev;
lio = GET_LIO(netdev);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
memset(&droq_ops, 0, sizeof(struct octeon_droq_ops));
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
droq_ops.fptr = liquidio_push_packet;
droq_ops.farg = (void *)netdev;
droq_ops.poll_mode = 1;
droq_ops.napi_fn = liquidio_napi_drv_callback;
cpu_id = 0;
cpu_id_modulus = num_present_cpus();
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
/* set up DROQs. */
for (q = 0; q < lio->linfo.num_rxpciq; q++) {
q_no = lio->linfo.rxpciq[q].s.q_no;
dev_dbg(&octeon_dev->pci_dev->dev,
"setup_io_queues index:%d linfo.rxpciq.s.q_no:%d\n",
q, q_no);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
retval = octeon_setup_droq(octeon_dev, q_no,
CFG_GET_NUM_RX_DESCS_NIC_IF
(octeon_get_conf(octeon_dev),
lio->ifidx),
CFG_GET_NUM_RX_BUF_SIZE_NIC_IF
(octeon_get_conf(octeon_dev),
lio->ifidx), NULL);
if (retval) {
dev_err(&octeon_dev->pci_dev->dev,
"%s : Runtime DROQ(RxQ) creation failed.\n",
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
__func__);
return 1;
}
droq = octeon_dev->droq[q_no];
napi = &droq->napi;
dev_dbg(&octeon_dev->pci_dev->dev, "netif_napi_add netdev:%llx oct:%llx pf_num:%d\n",
(u64)netdev, (u64)octeon_dev, octeon_dev->pf_num);
netif_napi_add(netdev, napi, liquidio_napi_poll, 64);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
/* designate a CPU for this droq */
droq->cpu_id = cpu_id;
cpu_id++;
if (cpu_id >= cpu_id_modulus)
cpu_id = 0;
octeon_register_droq_ops(octeon_dev, q_no, &droq_ops);
}
if (OCTEON_CN23XX_PF(octeon_dev)) {
/* 23XX PF can receive control messages (via the first PF-owned
* droq) from the firmware even if the ethX interface is down,
* so that's why poll_mode must be off for the first droq.
*/
octeon_dev->droq[0]->ops.poll_mode = 0;
}
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
/* set up IQs. */
for (q = 0; q < lio->linfo.num_txpciq; q++) {
num_tx_descs = CFG_GET_NUM_TX_DESCS_NIC_IF(octeon_get_conf
(octeon_dev),
lio->ifidx);
retval = octeon_setup_iq(octeon_dev, ifidx, q,
lio->linfo.txpciq[q], num_tx_descs,
netdev_get_tx_queue(netdev, q));
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
if (retval) {
dev_err(&octeon_dev->pci_dev->dev,
" %s : Runtime IQ(TxQ) creation failed.\n",
__func__);
return 1;
}
if (octeon_dev->ioq_vector) {
struct octeon_ioq_vector *ioq_vector;
ioq_vector = &octeon_dev->ioq_vector[q];
netif_set_xps_queue(netdev,
&ioq_vector->affinity_mask,
ioq_vector->iq_index);
}
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
}
return 0;
}
/**
* \brief Poll routine for checking transmit queue status
* @param work work_struct data structure
*/
static void octnet_poll_check_txq_status(struct work_struct *work)
{
struct cavium_wk *wk = (struct cavium_wk *)work;
struct lio *lio = (struct lio *)wk->ctxptr;
if (!ifstate_check(lio, LIO_IFSTATE_RUNNING))
return;
check_txq_status(lio);
queue_delayed_work(lio->txq_status_wq.wq,
&lio->txq_status_wq.wk.work, msecs_to_jiffies(1));
}
/**
* \brief Sets up the txq poll check
* @param netdev network device
*/
static inline int setup_tx_poll_fn(struct net_device *netdev)
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
{
struct lio *lio = GET_LIO(netdev);
struct octeon_device *oct = lio->oct_dev;
lio->txq_status_wq.wq = alloc_workqueue("txq-status",
WQ_MEM_RECLAIM, 0);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
if (!lio->txq_status_wq.wq) {
dev_err(&oct->pci_dev->dev, "unable to create cavium txq status wq\n");
return -1;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
}
INIT_DELAYED_WORK(&lio->txq_status_wq.wk.work,
octnet_poll_check_txq_status);
lio->txq_status_wq.wk.ctxptr = lio;
queue_delayed_work(lio->txq_status_wq.wq,
&lio->txq_status_wq.wk.work, msecs_to_jiffies(1));
return 0;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
}
static inline void cleanup_tx_poll_fn(struct net_device *netdev)
{
struct lio *lio = GET_LIO(netdev);
if (lio->txq_status_wq.wq) {
cancel_delayed_work_sync(&lio->txq_status_wq.wk.work);
destroy_workqueue(lio->txq_status_wq.wq);
}
}
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
/**
* \brief Net device open for LiquidIO
* @param netdev network device
*/
static int liquidio_open(struct net_device *netdev)
{
struct lio *lio = GET_LIO(netdev);
struct octeon_device *oct = lio->oct_dev;
struct napi_struct *napi, *n;
if (oct->props[lio->ifidx].napi_enabled == 0) {
list_for_each_entry_safe(napi, n, &netdev->napi_list, dev_list)
napi_enable(napi);
oct->props[lio->ifidx].napi_enabled = 1;
if (OCTEON_CN23XX_PF(oct))
oct->droq[0]->ops.poll_mode = 1;
}
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
if ((oct->chip_id == OCTEON_CN66XX || oct->chip_id == OCTEON_CN68XX) &&
ptp_enable)
oct_ptp_open(netdev);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
ifstate_set(lio, LIO_IFSTATE_RUNNING);
/* Ready for link status updates */
lio->intf_open = 1;
netif_info(lio, ifup, lio->netdev, "Interface Open, ready for traffic\n");
if (OCTEON_CN23XX_PF(oct)) {
if (!oct->msix_on)
if (setup_tx_poll_fn(netdev))
return -1;
} else {
if (setup_tx_poll_fn(netdev))
return -1;
}
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
start_txq(netdev);
/* tell Octeon to start forwarding packets to host */
send_rx_ctrl_cmd(lio, 1);
dev_info(&oct->pci_dev->dev, "%s interface is opened\n",
netdev->name);
return 0;
}
/**
* \brief Net device stop for LiquidIO
* @param netdev network device
*/
static int liquidio_stop(struct net_device *netdev)
{
struct lio *lio = GET_LIO(netdev);
struct octeon_device *oct = lio->oct_dev;
ifstate_reset(lio, LIO_IFSTATE_RUNNING);
netif_tx_disable(netdev);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
/* Inform that netif carrier is down */
netif_carrier_off(netdev);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
lio->intf_open = 0;
lio->linfo.link.s.link_up = 0;
lio->link_changes++;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
/* Tell Octeon that nic interface is down. */
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
send_rx_ctrl_cmd(lio, 0);
if (OCTEON_CN23XX_PF(oct)) {
if (!oct->msix_on)
cleanup_tx_poll_fn(netdev);
} else {
cleanup_tx_poll_fn(netdev);
}
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
if (lio->ptp_clock) {
ptp_clock_unregister(lio->ptp_clock);
lio->ptp_clock = NULL;
}
dev_info(&oct->pci_dev->dev, "%s interface is stopped\n", netdev->name);
return 0;
}
/**
* \brief Converts a mask based on net device flags
* @param netdev network device
*
* This routine generates a octnet_ifflags mask from the net device flags
* received from the OS.
*/
static inline enum octnet_ifflags get_new_flags(struct net_device *netdev)
{
enum octnet_ifflags f = OCTNET_IFFLAG_UNICAST;
if (netdev->flags & IFF_PROMISC)
f |= OCTNET_IFFLAG_PROMISC;
if (netdev->flags & IFF_ALLMULTI)
f |= OCTNET_IFFLAG_ALLMULTI;
if (netdev->flags & IFF_MULTICAST) {
f |= OCTNET_IFFLAG_MULTICAST;
/* Accept all multicast addresses if there are more than we
* can handle
*/
if (netdev_mc_count(netdev) > MAX_OCTEON_MULTICAST_ADDR)
f |= OCTNET_IFFLAG_ALLMULTI;
}
if (netdev->flags & IFF_BROADCAST)
f |= OCTNET_IFFLAG_BROADCAST;
return f;
}
/**
* \brief Net device set_multicast_list
* @param netdev network device
*/
static void liquidio_set_mcast_list(struct net_device *netdev)
{
struct lio *lio = GET_LIO(netdev);
struct octeon_device *oct = lio->oct_dev;
struct octnic_ctrl_pkt nctrl;
struct netdev_hw_addr *ha;
u64 *mc;
int ret;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
int mc_count = min(netdev_mc_count(netdev), MAX_OCTEON_MULTICAST_ADDR);
memset(&nctrl, 0, sizeof(struct octnic_ctrl_pkt));
/* Create a ctrl pkt command to be sent to core app. */
nctrl.ncmd.u64 = 0;
nctrl.ncmd.s.cmd = OCTNET_CMD_SET_MULTI_LIST;
nctrl.ncmd.s.param1 = get_new_flags(netdev);
nctrl.ncmd.s.param2 = mc_count;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
nctrl.ncmd.s.more = mc_count;
nctrl.iq_no = lio->linfo.txpciq[0].s.q_no;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
nctrl.netpndev = (u64)netdev;
nctrl.cb_fn = liquidio_link_ctrl_cmd_completion;
/* copy all the addresses into the udd */
mc = &nctrl.udd[0];
netdev_for_each_mc_addr(ha, netdev) {
*mc = 0;
memcpy(((u8 *)mc) + 2, ha->addr, ETH_ALEN);
/* no need to swap bytes */
if (++mc > &nctrl.udd[mc_count])
break;
}
/* Apparently, any activity in this call from the kernel has to
* be atomic. So we won't wait for response.
*/
nctrl.wait_time = 0;
ret = octnet_send_nic_ctrl_pkt(lio->oct_dev, &nctrl);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
if (ret < 0) {
dev_err(&oct->pci_dev->dev, "DEVFLAGS change failed in core (ret: 0x%x)\n",
ret);
}
}
/**
* \brief Net device set_mac_address
* @param netdev network device
*/
static int liquidio_set_mac(struct net_device *netdev, void *p)
{
int ret = 0;
struct lio *lio = GET_LIO(netdev);
struct octeon_device *oct = lio->oct_dev;
struct sockaddr *addr = (struct sockaddr *)p;
struct octnic_ctrl_pkt nctrl;
if (!is_valid_ether_addr(addr->sa_data))
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
return -EADDRNOTAVAIL;
memset(&nctrl, 0, sizeof(struct octnic_ctrl_pkt));
nctrl.ncmd.u64 = 0;
nctrl.ncmd.s.cmd = OCTNET_CMD_CHANGE_MACADDR;
nctrl.ncmd.s.param1 = 0;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
nctrl.ncmd.s.more = 1;
nctrl.iq_no = lio->linfo.txpciq[0].s.q_no;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
nctrl.netpndev = (u64)netdev;
nctrl.cb_fn = liquidio_link_ctrl_cmd_completion;
nctrl.wait_time = 100;
nctrl.udd[0] = 0;
/* The MAC Address is presented in network byte order. */
memcpy((u8 *)&nctrl.udd[0] + 2, addr->sa_data, ETH_ALEN);
ret = octnet_send_nic_ctrl_pkt(lio->oct_dev, &nctrl);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
if (ret < 0) {
dev_err(&oct->pci_dev->dev, "MAC Address change failed\n");
return -ENOMEM;
}
memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
memcpy(((u8 *)&lio->linfo.hw_addr) + 2, addr->sa_data, ETH_ALEN);
return 0;
}
/**
* \brief Net device get_stats
* @param netdev network device
*/
static struct net_device_stats *liquidio_get_stats(struct net_device *netdev)
{
struct lio *lio = GET_LIO(netdev);
struct net_device_stats *stats = &netdev->stats;
struct octeon_device *oct;
u64 pkts = 0, drop = 0, bytes = 0;
struct oct_droq_stats *oq_stats;
struct oct_iq_stats *iq_stats;
int i, iq_no, oq_no;
oct = lio->oct_dev;
for (i = 0; i < lio->linfo.num_txpciq; i++) {
iq_no = lio->linfo.txpciq[i].s.q_no;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
iq_stats = &oct->instr_queue[iq_no]->stats;
pkts += iq_stats->tx_done;
drop += iq_stats->tx_dropped;
bytes += iq_stats->tx_tot_bytes;
}
stats->tx_packets = pkts;
stats->tx_bytes = bytes;
stats->tx_dropped = drop;
pkts = 0;
drop = 0;
bytes = 0;
for (i = 0; i < lio->linfo.num_rxpciq; i++) {
oq_no = lio->linfo.rxpciq[i].s.q_no;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
oq_stats = &oct->droq[oq_no]->stats;
pkts += oq_stats->rx_pkts_received;
drop += (oq_stats->rx_dropped +
oq_stats->dropped_nodispatch +
oq_stats->dropped_toomany +
oq_stats->dropped_nomem);
bytes += oq_stats->rx_bytes_received;
}
stats->rx_bytes = bytes;
stats->rx_packets = pkts;
stats->rx_dropped = drop;
return stats;
}
/**
* \brief Net device change_mtu
* @param netdev network device
*/
static int liquidio_change_mtu(struct net_device *netdev, int new_mtu)
{
struct lio *lio = GET_LIO(netdev);
struct octeon_device *oct = lio->oct_dev;
struct octnic_ctrl_pkt nctrl;
int ret = 0;
memset(&nctrl, 0, sizeof(struct octnic_ctrl_pkt));
nctrl.ncmd.u64 = 0;
nctrl.ncmd.s.cmd = OCTNET_CMD_CHANGE_MTU;
nctrl.ncmd.s.param1 = new_mtu;
nctrl.iq_no = lio->linfo.txpciq[0].s.q_no;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
nctrl.wait_time = 100;
nctrl.netpndev = (u64)netdev;
nctrl.cb_fn = liquidio_link_ctrl_cmd_completion;
ret = octnet_send_nic_ctrl_pkt(lio->oct_dev, &nctrl);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
if (ret < 0) {
dev_err(&oct->pci_dev->dev, "Failed to set MTU\n");
return -1;
}
lio->mtu = new_mtu;
return 0;
}
/**
* \brief Handler for SIOCSHWTSTAMP ioctl
* @param netdev network device
* @param ifr interface request
* @param cmd command
*/
static int hwtstamp_ioctl(struct net_device *netdev, struct ifreq *ifr)
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
{
struct hwtstamp_config conf;
struct lio *lio = GET_LIO(netdev);
if (copy_from_user(&conf, ifr->ifr_data, sizeof(conf)))
return -EFAULT;
if (conf.flags)
return -EINVAL;
switch (conf.tx_type) {
case HWTSTAMP_TX_ON:
case HWTSTAMP_TX_OFF:
break;
default:
return -ERANGE;
}
switch (conf.rx_filter) {
case HWTSTAMP_FILTER_NONE:
break;
case HWTSTAMP_FILTER_ALL:
case HWTSTAMP_FILTER_SOME:
case HWTSTAMP_FILTER_PTP_V1_L4_EVENT:
case HWTSTAMP_FILTER_PTP_V1_L4_SYNC:
case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ:
case HWTSTAMP_FILTER_PTP_V2_L4_EVENT:
case HWTSTAMP_FILTER_PTP_V2_L4_SYNC:
case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ:
case HWTSTAMP_FILTER_PTP_V2_L2_EVENT:
case HWTSTAMP_FILTER_PTP_V2_L2_SYNC:
case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ:
case HWTSTAMP_FILTER_PTP_V2_EVENT:
case HWTSTAMP_FILTER_PTP_V2_SYNC:
case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ:
case HWTSTAMP_FILTER_NTP_ALL:
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
conf.rx_filter = HWTSTAMP_FILTER_ALL;
break;
default:
return -ERANGE;
}
if (conf.rx_filter == HWTSTAMP_FILTER_ALL)
ifstate_set(lio, LIO_IFSTATE_RX_TIMESTAMP_ENABLED);
else
ifstate_reset(lio, LIO_IFSTATE_RX_TIMESTAMP_ENABLED);
return copy_to_user(ifr->ifr_data, &conf, sizeof(conf)) ? -EFAULT : 0;
}
/**
* \brief ioctl handler
* @param netdev network device
* @param ifr interface request
* @param cmd command
*/
static int liquidio_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
{
struct lio *lio = GET_LIO(netdev);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
switch (cmd) {
case SIOCSHWTSTAMP:
if ((lio->oct_dev->chip_id == OCTEON_CN66XX ||
lio->oct_dev->chip_id == OCTEON_CN68XX) && ptp_enable)
return hwtstamp_ioctl(netdev, ifr);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
default:
return -EOPNOTSUPP;
}
}
/**
* \brief handle a Tx timestamp response
* @param status response status
* @param buf pointer to skb
*/
static void handle_timestamp(struct octeon_device *oct,
u32 status,
void *buf)
{
struct octnet_buf_free_info *finfo;
struct octeon_soft_command *sc;
struct oct_timestamp_resp *resp;
struct lio *lio;
struct sk_buff *skb = (struct sk_buff *)buf;
finfo = (struct octnet_buf_free_info *)skb->cb;
lio = finfo->lio;
sc = finfo->sc;
oct = lio->oct_dev;
resp = (struct oct_timestamp_resp *)sc->virtrptr;
if (status != OCTEON_REQUEST_DONE) {
dev_err(&oct->pci_dev->dev, "Tx timestamp instruction failed. Status: %llx\n",
CVM_CAST64(status));
resp->timestamp = 0;
}
octeon_swap_8B_data(&resp->timestamp, 1);
if (unlikely((skb_shinfo(skb)->tx_flags & SKBTX_IN_PROGRESS) != 0)) {
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
struct skb_shared_hwtstamps ts;
u64 ns = resp->timestamp;
netif_info(lio, tx_done, lio->netdev,
"Got resulting SKBTX_HW_TSTAMP skb=%p ns=%016llu\n",
skb, (unsigned long long)ns);
ts.hwtstamp = ns_to_ktime(ns + lio->ptp_adjust);
skb_tstamp_tx(skb, &ts);
}
octeon_free_soft_command(oct, sc);
tx_buffer_free(skb);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
}
/* \brief Send a data packet that will be timestamped
* @param oct octeon device
* @param ndata pointer to network data
* @param finfo pointer to private network data
*/
static inline int send_nic_timestamp_pkt(struct octeon_device *oct,
struct octnic_data_pkt *ndata,
struct octnet_buf_free_info *finfo)
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
{
int retval;
struct octeon_soft_command *sc;
struct lio *lio;
int ring_doorbell;
u32 len;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
lio = finfo->lio;
sc = octeon_alloc_soft_command_resp(oct, &ndata->cmd,
sizeof(struct oct_timestamp_resp));
finfo->sc = sc;
if (!sc) {
dev_err(&oct->pci_dev->dev, "No memory for timestamped data packet\n");
return IQ_SEND_FAILED;
}
if (ndata->reqtype == REQTYPE_NORESP_NET)
ndata->reqtype = REQTYPE_RESP_NET;
else if (ndata->reqtype == REQTYPE_NORESP_NET_SG)
ndata->reqtype = REQTYPE_RESP_NET_SG;
sc->callback = handle_timestamp;
sc->callback_arg = finfo->skb;
sc->iq_no = ndata->q_no;
if (OCTEON_CN23XX_PF(oct))
len = (u32)((struct octeon_instr_ih3 *)
(&sc->cmd.cmd3.ih3))->dlengsz;
else
len = (u32)((struct octeon_instr_ih2 *)
(&sc->cmd.cmd2.ih2))->dlengsz;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
ring_doorbell = 1;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
retval = octeon_send_command(oct, sc->iq_no, ring_doorbell, &sc->cmd,
sc, len, ndata->reqtype);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
if (retval == IQ_SEND_FAILED) {
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
dev_err(&oct->pci_dev->dev, "timestamp data packet failed status: %x\n",
retval);
octeon_free_soft_command(oct, sc);
} else {
netif_info(lio, tx_queued, lio->netdev, "Queued timestamp packet\n");
}
return retval;
}
/** \brief Transmit networks packets to the Octeon interface
* @param skbuff skbuff struct to be passed to network layer.
* @param netdev pointer to network device
* @returns whether the packet was transmitted to the device okay or not
* (NETDEV_TX_OK or NETDEV_TX_BUSY)
*/
static int liquidio_xmit(struct sk_buff *skb, struct net_device *netdev)
{
struct lio *lio;
struct octnet_buf_free_info *finfo;
union octnic_cmd_setup cmdsetup;
struct octnic_data_pkt ndata;
struct octeon_device *oct;
struct oct_iq_stats *stats;
struct octeon_instr_irh *irh;
union tx_info *tx_info;
int status = 0;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
int q_idx = 0, iq_no = 0;
int j;
u64 dptr = 0;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
u32 tag = 0;
lio = GET_LIO(netdev);
oct = lio->oct_dev;
if (netif_is_multiqueue(netdev)) {
q_idx = skb->queue_mapping;
q_idx = (q_idx % (lio->linfo.num_txpciq));
tag = q_idx;
iq_no = lio->linfo.txpciq[q_idx].s.q_no;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
} else {
iq_no = lio->txq;
}
stats = &oct->instr_queue[iq_no]->stats;
/* Check for all conditions in which the current packet cannot be
* transmitted.
*/
if (!(atomic_read(&lio->ifstate) & LIO_IFSTATE_RUNNING) ||
(!lio->linfo.link.s.link_up) ||
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
(skb->len <= 0)) {
netif_info(lio, tx_err, lio->netdev,
"Transmit failed link_status : %d\n",
lio->linfo.link.s.link_up);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
goto lio_xmit_failed;
}
/* Use space in skb->cb to store info used to unmap and
* free the buffers.
*/
finfo = (struct octnet_buf_free_info *)skb->cb;
finfo->lio = lio;
finfo->skb = skb;
finfo->sc = NULL;
/* Prepare the attributes for the data to be passed to OSI. */
memset(&ndata, 0, sizeof(struct octnic_data_pkt));
ndata.buf = (void *)finfo;
ndata.q_no = iq_no;
if (netif_is_multiqueue(netdev)) {
if (octnet_iq_is_full(oct, ndata.q_no)) {
/* defer sending if queue is full */
netif_info(lio, tx_err, lio->netdev, "Transmit failed iq:%d full\n",
ndata.q_no);
stats->tx_iq_busy++;
return NETDEV_TX_BUSY;
}
} else {
if (octnet_iq_is_full(oct, lio->txq)) {
/* defer sending if queue is full */
stats->tx_iq_busy++;
netif_info(lio, tx_err, lio->netdev, "Transmit failed iq:%d full\n",
lio->txq);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
return NETDEV_TX_BUSY;
}
}
/* pr_info(" XMIT - valid Qs: %d, 1st Q no: %d, cpu: %d, q_no:%d\n",
* lio->linfo.num_txpciq, lio->txq, cpu, ndata.q_no);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
*/
ndata.datasize = skb->len;
cmdsetup.u64 = 0;
cmdsetup.s.iq_no = iq_no;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
if (skb->ip_summed == CHECKSUM_PARTIAL) {
if (skb->encapsulation) {
cmdsetup.s.tnl_csum = 1;
stats->tx_vxlan++;
} else {
cmdsetup.s.transport_csum = 1;
}
}
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)) {
skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
cmdsetup.s.timestamp = 1;
}
if (skb_shinfo(skb)->nr_frags == 0) {
cmdsetup.s.u.datasize = skb->len;
octnet_prepare_pci_cmd(oct, &ndata.cmd, &cmdsetup, tag);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
/* Offload checksum calculation for TCP/UDP packets */
dptr = dma_map_single(&oct->pci_dev->dev,
skb->data,
skb->len,
DMA_TO_DEVICE);
if (dma_mapping_error(&oct->pci_dev->dev, dptr)) {
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
dev_err(&oct->pci_dev->dev, "%s DMA mapping error 1\n",
__func__);
return NETDEV_TX_BUSY;
}
if (OCTEON_CN23XX_PF(oct))
ndata.cmd.cmd3.dptr = dptr;
else
ndata.cmd.cmd2.dptr = dptr;
finfo->dptr = dptr;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
ndata.reqtype = REQTYPE_NORESP_NET;
} else {
int i, frags;
struct skb_frag_struct *frag;
struct octnic_gather *g;
spin_lock(&lio->glist_lock[q_idx]);
g = (struct octnic_gather *)
list_delete_head(&lio->glist[q_idx]);
spin_unlock(&lio->glist_lock[q_idx]);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
if (!g) {
netif_info(lio, tx_err, lio->netdev,
"Transmit scatter gather: glist null!\n");
goto lio_xmit_failed;
}
cmdsetup.s.gather = 1;
cmdsetup.s.u.gatherptrs = (skb_shinfo(skb)->nr_frags + 1);
octnet_prepare_pci_cmd(oct, &ndata.cmd, &cmdsetup, tag);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
memset(g->sg, 0, g->sg_size);
g->sg[0].ptr[0] = dma_map_single(&oct->pci_dev->dev,
skb->data,
(skb->len - skb->data_len),
DMA_TO_DEVICE);
if (dma_mapping_error(&oct->pci_dev->dev, g->sg[0].ptr[0])) {
dev_err(&oct->pci_dev->dev, "%s DMA mapping error 2\n",
__func__);
return NETDEV_TX_BUSY;
}
add_sg_size(&g->sg[0], (skb->len - skb->data_len), 0);
frags = skb_shinfo(skb)->nr_frags;
i = 1;
while (frags--) {
frag = &skb_shinfo(skb)->frags[i - 1];
g->sg[(i >> 2)].ptr[(i & 3)] =
dma_map_page(&oct->pci_dev->dev,
frag->page.p,
frag->page_offset,
frag->size,
DMA_TO_DEVICE);
if (dma_mapping_error(&oct->pci_dev->dev,
g->sg[i >> 2].ptr[i & 3])) {
dma_unmap_single(&oct->pci_dev->dev,
g->sg[0].ptr[0],
skb->len - skb->data_len,
DMA_TO_DEVICE);
for (j = 1; j < i; j++) {
frag = &skb_shinfo(skb)->frags[j - 1];
dma_unmap_page(&oct->pci_dev->dev,
g->sg[j >> 2].ptr[j & 3],
frag->size,
DMA_TO_DEVICE);
}
dev_err(&oct->pci_dev->dev, "%s DMA mapping error 3\n",
__func__);
return NETDEV_TX_BUSY;
}
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
add_sg_size(&g->sg[(i >> 2)], frag->size, (i & 3));
i++;
}
dptr = g->sg_dma_ptr;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
if (OCTEON_CN23XX_PF(oct))
ndata.cmd.cmd3.dptr = dptr;
else
ndata.cmd.cmd2.dptr = dptr;
finfo->dptr = dptr;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
finfo->g = g;
ndata.reqtype = REQTYPE_NORESP_NET_SG;
}
if (OCTEON_CN23XX_PF(oct)) {
irh = (struct octeon_instr_irh *)&ndata.cmd.cmd3.irh;
tx_info = (union tx_info *)&ndata.cmd.cmd3.ossp[0];
} else {
irh = (struct octeon_instr_irh *)&ndata.cmd.cmd2.irh;
tx_info = (union tx_info *)&ndata.cmd.cmd2.ossp[0];
}
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
if (skb_shinfo(skb)->gso_size) {
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
tx_info->s.gso_size = skb_shinfo(skb)->gso_size;
tx_info->s.gso_segs = skb_shinfo(skb)->gso_segs;
stats->tx_gso++;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
}
/* HW insert VLAN tag */
if (skb_vlan_tag_present(skb)) {
irh->priority = skb_vlan_tag_get(skb) >> 13;
irh->vlan = skb_vlan_tag_get(skb) & 0xfff;
}
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
if (unlikely(cmdsetup.s.timestamp))
status = send_nic_timestamp_pkt(oct, &ndata, finfo);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
else
status = octnet_send_nic_data_pkt(oct, &ndata);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
if (status == IQ_SEND_FAILED)
goto lio_xmit_failed;
netif_info(lio, tx_queued, lio->netdev, "Transmit queued successfully\n");
if (status == IQ_SEND_STOP)
stop_q(lio->netdev, q_idx);
netif_trans_update(netdev);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
if (tx_info->s.gso_segs)
stats->tx_done += tx_info->s.gso_segs;
else
stats->tx_done++;
stats->tx_tot_bytes += ndata.datasize;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
return NETDEV_TX_OK;
lio_xmit_failed:
stats->tx_dropped++;
netif_info(lio, tx_err, lio->netdev, "IQ%d Transmit dropped:%llu\n",
iq_no, stats->tx_dropped);
if (dptr)
dma_unmap_single(&oct->pci_dev->dev, dptr,
ndata.datasize, DMA_TO_DEVICE);
tx_buffer_free(skb);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
return NETDEV_TX_OK;
}
/** \brief Network device Tx timeout
* @param netdev pointer to network device
*/
static void liquidio_tx_timeout(struct net_device *netdev)
{
struct lio *lio;
lio = GET_LIO(netdev);
netif_info(lio, tx_err, lio->netdev,
"Transmit timeout tx_dropped:%ld, waking up queues now!!\n",
netdev->stats.tx_dropped);
netif_trans_update(netdev);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
txqs_wake(netdev);
}
static int liquidio_vlan_rx_add_vid(struct net_device *netdev,
__be16 proto __attribute__((unused)),
u16 vid)
{
struct lio *lio = GET_LIO(netdev);
struct octeon_device *oct = lio->oct_dev;
struct octnic_ctrl_pkt nctrl;
int ret = 0;
memset(&nctrl, 0, sizeof(struct octnic_ctrl_pkt));
nctrl.ncmd.u64 = 0;
nctrl.ncmd.s.cmd = OCTNET_CMD_ADD_VLAN_FILTER;
nctrl.ncmd.s.param1 = vid;
nctrl.iq_no = lio->linfo.txpciq[0].s.q_no;
nctrl.wait_time = 100;
nctrl.netpndev = (u64)netdev;
nctrl.cb_fn = liquidio_link_ctrl_cmd_completion;
ret = octnet_send_nic_ctrl_pkt(lio->oct_dev, &nctrl);
if (ret < 0) {
dev_err(&oct->pci_dev->dev, "Add VLAN filter failed in core (ret: 0x%x)\n",
ret);
}
return ret;
}
static int liquidio_vlan_rx_kill_vid(struct net_device *netdev,
__be16 proto __attribute__((unused)),
u16 vid)
{
struct lio *lio = GET_LIO(netdev);
struct octeon_device *oct = lio->oct_dev;
struct octnic_ctrl_pkt nctrl;
int ret = 0;
memset(&nctrl, 0, sizeof(struct octnic_ctrl_pkt));
nctrl.ncmd.u64 = 0;
nctrl.ncmd.s.cmd = OCTNET_CMD_DEL_VLAN_FILTER;
nctrl.ncmd.s.param1 = vid;
nctrl.iq_no = lio->linfo.txpciq[0].s.q_no;
nctrl.wait_time = 100;
nctrl.netpndev = (u64)netdev;
nctrl.cb_fn = liquidio_link_ctrl_cmd_completion;
ret = octnet_send_nic_ctrl_pkt(lio->oct_dev, &nctrl);
if (ret < 0) {
dev_err(&oct->pci_dev->dev, "Add VLAN filter failed in core (ret: 0x%x)\n",
ret);
}
return ret;
}
/** Sending command to enable/disable RX checksum offload
* @param netdev pointer to network device
* @param command OCTNET_CMD_TNL_RX_CSUM_CTL
* @param rx_cmd_bit OCTNET_CMD_RXCSUM_ENABLE/
* OCTNET_CMD_RXCSUM_DISABLE
* @returns SUCCESS or FAILURE
*/
static int liquidio_set_rxcsum_command(struct net_device *netdev, int command,
u8 rx_cmd)
{
struct lio *lio = GET_LIO(netdev);
struct octeon_device *oct = lio->oct_dev;
struct octnic_ctrl_pkt nctrl;
int ret = 0;
memset(&nctrl, 0, sizeof(struct octnic_ctrl_pkt));
nctrl.ncmd.u64 = 0;
nctrl.ncmd.s.cmd = command;
nctrl.ncmd.s.param1 = rx_cmd;
nctrl.iq_no = lio->linfo.txpciq[0].s.q_no;
nctrl.wait_time = 100;
nctrl.netpndev = (u64)netdev;
nctrl.cb_fn = liquidio_link_ctrl_cmd_completion;
ret = octnet_send_nic_ctrl_pkt(lio->oct_dev, &nctrl);
if (ret < 0) {
dev_err(&oct->pci_dev->dev,
"DEVFLAGS RXCSUM change failed in core(ret:0x%x)\n",
ret);
}
return ret;
}
/** Sending command to add/delete VxLAN UDP port to firmware
* @param netdev pointer to network device
* @param command OCTNET_CMD_VXLAN_PORT_CONFIG
* @param vxlan_port VxLAN port to be added or deleted
* @param vxlan_cmd_bit OCTNET_CMD_VXLAN_PORT_ADD,
* OCTNET_CMD_VXLAN_PORT_DEL
* @returns SUCCESS or FAILURE
*/
static int liquidio_vxlan_port_command(struct net_device *netdev, int command,
u16 vxlan_port, u8 vxlan_cmd_bit)
{
struct lio *lio = GET_LIO(netdev);
struct octeon_device *oct = lio->oct_dev;
struct octnic_ctrl_pkt nctrl;
int ret = 0;
memset(&nctrl, 0, sizeof(struct octnic_ctrl_pkt));
nctrl.ncmd.u64 = 0;
nctrl.ncmd.s.cmd = command;
nctrl.ncmd.s.more = vxlan_cmd_bit;
nctrl.ncmd.s.param1 = vxlan_port;
nctrl.iq_no = lio->linfo.txpciq[0].s.q_no;
nctrl.wait_time = 100;
nctrl.netpndev = (u64)netdev;
nctrl.cb_fn = liquidio_link_ctrl_cmd_completion;
ret = octnet_send_nic_ctrl_pkt(lio->oct_dev, &nctrl);
if (ret < 0) {
dev_err(&oct->pci_dev->dev,
"VxLAN port add/delete failed in core (ret:0x%x)\n",
ret);
}
return ret;
}
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
/** \brief Net device fix features
* @param netdev pointer to network device
* @param request features requested
* @returns updated features list
*/
static netdev_features_t liquidio_fix_features(struct net_device *netdev,
netdev_features_t request)
{
struct lio *lio = netdev_priv(netdev);
if ((request & NETIF_F_RXCSUM) &&
!(lio->dev_capability & NETIF_F_RXCSUM))
request &= ~NETIF_F_RXCSUM;
if ((request & NETIF_F_HW_CSUM) &&
!(lio->dev_capability & NETIF_F_HW_CSUM))
request &= ~NETIF_F_HW_CSUM;
if ((request & NETIF_F_TSO) && !(lio->dev_capability & NETIF_F_TSO))
request &= ~NETIF_F_TSO;
if ((request & NETIF_F_TSO6) && !(lio->dev_capability & NETIF_F_TSO6))
request &= ~NETIF_F_TSO6;
if ((request & NETIF_F_LRO) && !(lio->dev_capability & NETIF_F_LRO))
request &= ~NETIF_F_LRO;
/*Disable LRO if RXCSUM is off */
if (!(request & NETIF_F_RXCSUM) && (netdev->features & NETIF_F_LRO) &&
(lio->dev_capability & NETIF_F_LRO))
request &= ~NETIF_F_LRO;
if ((request & NETIF_F_HW_VLAN_CTAG_FILTER) &&
!(lio->dev_capability & NETIF_F_HW_VLAN_CTAG_FILTER))
request &= ~NETIF_F_HW_VLAN_CTAG_FILTER;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
return request;
}
/** \brief Net device set features
* @param netdev pointer to network device
* @param features features to enable/disable
*/
static int liquidio_set_features(struct net_device *netdev,
netdev_features_t features)
{
struct lio *lio = netdev_priv(netdev);
if ((features & NETIF_F_LRO) &&
(lio->dev_capability & NETIF_F_LRO) &&
!(netdev->features & NETIF_F_LRO))
liquidio_set_feature(netdev, OCTNET_CMD_LRO_ENABLE,
OCTNIC_LROIPV4 | OCTNIC_LROIPV6);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
else if (!(features & NETIF_F_LRO) &&
(lio->dev_capability & NETIF_F_LRO) &&
(netdev->features & NETIF_F_LRO))
liquidio_set_feature(netdev, OCTNET_CMD_LRO_DISABLE,
OCTNIC_LROIPV4 | OCTNIC_LROIPV6);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
/* Sending command to firmware to enable/disable RX checksum
* offload settings using ethtool
*/
if (!(netdev->features & NETIF_F_RXCSUM) &&
(lio->enc_dev_capability & NETIF_F_RXCSUM) &&
(features & NETIF_F_RXCSUM))
liquidio_set_rxcsum_command(netdev,
OCTNET_CMD_TNL_RX_CSUM_CTL,
OCTNET_CMD_RXCSUM_ENABLE);
else if ((netdev->features & NETIF_F_RXCSUM) &&
(lio->enc_dev_capability & NETIF_F_RXCSUM) &&
!(features & NETIF_F_RXCSUM))
liquidio_set_rxcsum_command(netdev, OCTNET_CMD_TNL_RX_CSUM_CTL,
OCTNET_CMD_RXCSUM_DISABLE);
if ((features & NETIF_F_HW_VLAN_CTAG_FILTER) &&
(lio->dev_capability & NETIF_F_HW_VLAN_CTAG_FILTER) &&
!(netdev->features & NETIF_F_HW_VLAN_CTAG_FILTER))
liquidio_set_feature(netdev, OCTNET_CMD_VLAN_FILTER_CTL,
OCTNET_CMD_VLAN_FILTER_ENABLE);
else if (!(features & NETIF_F_HW_VLAN_CTAG_FILTER) &&
(lio->dev_capability & NETIF_F_HW_VLAN_CTAG_FILTER) &&
(netdev->features & NETIF_F_HW_VLAN_CTAG_FILTER))
liquidio_set_feature(netdev, OCTNET_CMD_VLAN_FILTER_CTL,
OCTNET_CMD_VLAN_FILTER_DISABLE);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
return 0;
}
static void liquidio_add_vxlan_port(struct net_device *netdev,
struct udp_tunnel_info *ti)
{
if (ti->type != UDP_TUNNEL_TYPE_VXLAN)
return;
liquidio_vxlan_port_command(netdev,
OCTNET_CMD_VXLAN_PORT_CONFIG,
htons(ti->port),
OCTNET_CMD_VXLAN_PORT_ADD);
}
static void liquidio_del_vxlan_port(struct net_device *netdev,
struct udp_tunnel_info *ti)
{
if (ti->type != UDP_TUNNEL_TYPE_VXLAN)
return;
liquidio_vxlan_port_command(netdev,
OCTNET_CMD_VXLAN_PORT_CONFIG,
htons(ti->port),
OCTNET_CMD_VXLAN_PORT_DEL);
}
static int __liquidio_set_vf_mac(struct net_device *netdev, int vfidx,
u8 *mac, bool is_admin_assigned)
{
struct lio *lio = GET_LIO(netdev);
struct octeon_device *oct = lio->oct_dev;
struct octnic_ctrl_pkt nctrl;
if (!is_valid_ether_addr(mac))
return -EINVAL;
if (vfidx < 0 || vfidx >= oct->sriov_info.max_vfs)
return -EINVAL;
memset(&nctrl, 0, sizeof(struct octnic_ctrl_pkt));
nctrl.ncmd.u64 = 0;
nctrl.ncmd.s.cmd = OCTNET_CMD_CHANGE_MACADDR;
/* vfidx is 0 based, but vf_num (param1) is 1 based */
nctrl.ncmd.s.param1 = vfidx + 1;
nctrl.ncmd.s.param2 = (is_admin_assigned ? 1 : 0);
nctrl.ncmd.s.more = 1;
nctrl.iq_no = lio->linfo.txpciq[0].s.q_no;
nctrl.netpndev = (u64)netdev;
nctrl.cb_fn = liquidio_link_ctrl_cmd_completion;
nctrl.wait_time = LIO_CMD_WAIT_TM;
nctrl.udd[0] = 0;
/* The MAC Address is presented in network byte order. */
ether_addr_copy((u8 *)&nctrl.udd[0] + 2, mac);
oct->sriov_info.vf_macaddr[vfidx] = nctrl.udd[0];
octnet_send_nic_ctrl_pkt(oct, &nctrl);
return 0;
}
static int liquidio_set_vf_mac(struct net_device *netdev, int vfidx, u8 *mac)
{
struct lio *lio = GET_LIO(netdev);
struct octeon_device *oct = lio->oct_dev;
int retval;
if (vfidx < 0 || vfidx >= oct->sriov_info.num_vfs_alloced)
return -EINVAL;
retval = __liquidio_set_vf_mac(netdev, vfidx, mac, true);
if (!retval)
cn23xx_tell_vf_its_macaddr_changed(oct, vfidx, mac);
return retval;
}
static int liquidio_set_vf_vlan(struct net_device *netdev, int vfidx,
u16 vlan, u8 qos, __be16 vlan_proto)
{
struct lio *lio = GET_LIO(netdev);
struct octeon_device *oct = lio->oct_dev;
struct octnic_ctrl_pkt nctrl;
u16 vlantci;
if (vfidx < 0 || vfidx >= oct->sriov_info.num_vfs_alloced)
return -EINVAL;
if (vlan_proto != htons(ETH_P_8021Q))
return -EPROTONOSUPPORT;
if (vlan >= VLAN_N_VID || qos > 7)
return -EINVAL;
if (vlan)
vlantci = vlan | (u16)qos << VLAN_PRIO_SHIFT;
else
vlantci = 0;
if (oct->sriov_info.vf_vlantci[vfidx] == vlantci)
return 0;
memset(&nctrl, 0, sizeof(struct octnic_ctrl_pkt));
if (vlan)
nctrl.ncmd.s.cmd = OCTNET_CMD_ADD_VLAN_FILTER;
else
nctrl.ncmd.s.cmd = OCTNET_CMD_DEL_VLAN_FILTER;
nctrl.ncmd.s.param1 = vlantci;
nctrl.ncmd.s.param2 =
vfidx + 1; /* vfidx is 0 based, but vf_num (param2) is 1 based */
nctrl.ncmd.s.more = 0;
nctrl.iq_no = lio->linfo.txpciq[0].s.q_no;
nctrl.cb_fn = 0;
nctrl.wait_time = LIO_CMD_WAIT_TM;
octnet_send_nic_ctrl_pkt(oct, &nctrl);
oct->sriov_info.vf_vlantci[vfidx] = vlantci;
return 0;
}
static int liquidio_get_vf_config(struct net_device *netdev, int vfidx,
struct ifla_vf_info *ivi)
{
struct lio *lio = GET_LIO(netdev);
struct octeon_device *oct = lio->oct_dev;
u8 *macaddr;
if (vfidx < 0 || vfidx >= oct->sriov_info.num_vfs_alloced)
return -EINVAL;
ivi->vf = vfidx;
macaddr = 2 + (u8 *)&oct->sriov_info.vf_macaddr[vfidx];
ether_addr_copy(&ivi->mac[0], macaddr);
ivi->vlan = oct->sriov_info.vf_vlantci[vfidx] & VLAN_VID_MASK;
ivi->qos = oct->sriov_info.vf_vlantci[vfidx] >> VLAN_PRIO_SHIFT;
ivi->linkstate = oct->sriov_info.vf_linkstate[vfidx];
return 0;
}
static int liquidio_set_vf_link_state(struct net_device *netdev, int vfidx,
int linkstate)
{
struct lio *lio = GET_LIO(netdev);
struct octeon_device *oct = lio->oct_dev;
struct octnic_ctrl_pkt nctrl;
if (vfidx < 0 || vfidx >= oct->sriov_info.num_vfs_alloced)
return -EINVAL;
if (oct->sriov_info.vf_linkstate[vfidx] == linkstate)
return 0;
memset(&nctrl, 0, sizeof(struct octnic_ctrl_pkt));
nctrl.ncmd.s.cmd = OCTNET_CMD_SET_VF_LINKSTATE;
nctrl.ncmd.s.param1 =
vfidx + 1; /* vfidx is 0 based, but vf_num (param1) is 1 based */
nctrl.ncmd.s.param2 = linkstate;
nctrl.ncmd.s.more = 0;
nctrl.iq_no = lio->linfo.txpciq[0].s.q_no;
nctrl.cb_fn = 0;
nctrl.wait_time = LIO_CMD_WAIT_TM;
octnet_send_nic_ctrl_pkt(oct, &nctrl);
oct->sriov_info.vf_linkstate[vfidx] = linkstate;
return 0;
}
static const struct net_device_ops lionetdevops = {
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
.ndo_open = liquidio_open,
.ndo_stop = liquidio_stop,
.ndo_start_xmit = liquidio_xmit,
.ndo_get_stats = liquidio_get_stats,
.ndo_set_mac_address = liquidio_set_mac,
.ndo_set_rx_mode = liquidio_set_mcast_list,
.ndo_tx_timeout = liquidio_tx_timeout,
.ndo_vlan_rx_add_vid = liquidio_vlan_rx_add_vid,
.ndo_vlan_rx_kill_vid = liquidio_vlan_rx_kill_vid,
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
.ndo_change_mtu = liquidio_change_mtu,
.ndo_do_ioctl = liquidio_ioctl,
.ndo_fix_features = liquidio_fix_features,
.ndo_set_features = liquidio_set_features,
.ndo_udp_tunnel_add = liquidio_add_vxlan_port,
.ndo_udp_tunnel_del = liquidio_del_vxlan_port,
.ndo_set_vf_mac = liquidio_set_vf_mac,
.ndo_set_vf_vlan = liquidio_set_vf_vlan,
.ndo_get_vf_config = liquidio_get_vf_config,
.ndo_set_vf_link_state = liquidio_set_vf_link_state,
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
};
/** \brief Entry point for the liquidio module
*/
static int __init liquidio_init(void)
{
int i;
struct handshake *hs;
init_completion(&first_stage);
octeon_init_device_list(OCTEON_CONFIG_TYPE_DEFAULT);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
if (liquidio_init_pci())
return -EINVAL;
wait_for_completion_timeout(&first_stage, msecs_to_jiffies(1000));
for (i = 0; i < MAX_OCTEON_DEVICES; i++) {
hs = &handshake[i];
if (hs->pci_dev) {
wait_for_completion(&hs->init);
if (!hs->init_ok) {
/* init handshake failed */
dev_err(&hs->pci_dev->dev,
"Failed to init device\n");
liquidio_deinit_pci();
return -EIO;
}
}
}
for (i = 0; i < MAX_OCTEON_DEVICES; i++) {
hs = &handshake[i];
if (hs->pci_dev) {
wait_for_completion_timeout(&hs->started,
msecs_to_jiffies(30000));
if (!hs->started_ok) {
/* starter handshake failed */
dev_err(&hs->pci_dev->dev,
"Firmware failed to start\n");
liquidio_deinit_pci();
return -EIO;
}
}
}
return 0;
}
Fix Cavium Liquidio build related errors and warnings 1) Fixed following sparse warnings: lio_main.c:213:6: warning: symbol 'octeon_droq_bh' was not declared. Should it be static? lio_main.c:233:5: warning: symbol 'lio_wait_for_oq_pkts' was not declared. Should it be static? lio_main.c:3083:5: warning: symbol 'lio_nic_info' was not declared. Should it be static? lio_main.c:2618:16: warning: cast from restricted __be16 octeon_device.c:466:6: warning: symbol 'oct_set_config_info' was not declared. Should it be static? octeon_device.c:573:25: warning: cast to restricted __be32 octeon_device.c:582:29: warning: cast to restricted __be32 octeon_device.c:584:39: warning: cast to restricted __be32 octeon_device.c:594:13: warning: cast to restricted __be32 octeon_device.c:596:25: warning: cast to restricted __be32 octeon_device.c:613:25: warning: cast to restricted __be32 octeon_device.c:614:29: warning: cast to restricted __be64 octeon_device.c:615:29: warning: cast to restricted __be32 octeon_device.c:619:37: warning: cast to restricted __be32 octeon_device.c:623:33: warning: cast to restricted __be32 cn66xx_device.c:540:6: warning: symbol 'lio_cn6xxx_get_pcie_qlmport' was not declared. Should it be s octeon_mem_ops.c:181:16: warning: cast to restricted __be64 octeon_mem_ops.c:190:16: warning: cast to restricted __be32 octeon_mem_ops.c:196:17: warning: incorrect type in initializer 2) Fix build errors corresponding to vmalloc on linux-next 4.1. 3) Liquidio now supports 64 bit only, modified Kconfig accordingly. 4) Fix some code alignment issues based on kernel build warnings. Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-12 19:11:50 -06:00
static int lio_nic_info(struct octeon_recv_info *recv_info, void *buf)
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
{
struct octeon_device *oct = (struct octeon_device *)buf;
struct octeon_recv_pkt *recv_pkt = recv_info->recv_pkt;
int gmxport = 0;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
union oct_link_status *ls;
int i;
if (recv_pkt->buffer_size[0] != (sizeof(*ls) + OCT_DROQ_INFO_SIZE)) {
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
dev_err(&oct->pci_dev->dev, "Malformed NIC_INFO, len=%d, ifidx=%d\n",
recv_pkt->buffer_size[0],
recv_pkt->rh.r_nic_info.gmxport);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
goto nic_info_err;
}
gmxport = recv_pkt->rh.r_nic_info.gmxport;
ls = (union oct_link_status *)(get_rbd(recv_pkt->buffer_ptr[0]) +
OCT_DROQ_INFO_SIZE);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
octeon_swap_8B_data((u64 *)ls, (sizeof(union oct_link_status)) >> 3);
for (i = 0; i < oct->ifcount; i++) {
if (oct->props[i].gmxport == gmxport) {
update_link_status(oct->props[i].netdev, ls);
break;
}
}
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
nic_info_err:
for (i = 0; i < recv_pkt->buffer_count; i++)
recv_buffer_free(recv_pkt->buffer_ptr[i]);
octeon_free_recv_info(recv_info);
return 0;
}
/**
* \brief Setup network interfaces
* @param octeon_dev octeon device
*
* Called during init time for each device. It assumes the NIC
* is already up and running. The link information for each
* interface is passed in link_info.
*/
static int setup_nic_devices(struct octeon_device *octeon_dev)
{
struct lio *lio = NULL;
struct net_device *netdev;
u8 mac[6], i, j;
struct octeon_soft_command *sc;
struct liquidio_if_cfg_context *ctx;
struct liquidio_if_cfg_resp *resp;
struct octdev_props *props;
int retval, num_iqueues, num_oqueues;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
union oct_nic_if_cfg if_cfg;
unsigned int base_queue;
unsigned int gmx_port_id;
u32 resp_size, ctx_size, data_size;
u32 ifidx_or_pfnum;
struct lio_version *vdata;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
/* This is to handle link status changes */
octeon_register_dispatch_fn(octeon_dev, OPCODE_NIC,
OPCODE_NIC_INFO,
lio_nic_info, octeon_dev);
/* REQTYPE_RESP_NET and REQTYPE_SOFT_COMMAND do not have free functions.
* They are handled directly.
*/
octeon_register_reqtype_free_fn(octeon_dev, REQTYPE_NORESP_NET,
free_netbuf);
octeon_register_reqtype_free_fn(octeon_dev, REQTYPE_NORESP_NET_SG,
free_netsgbuf);
octeon_register_reqtype_free_fn(octeon_dev, REQTYPE_RESP_NET_SG,
free_netsgbuf_with_resp);
for (i = 0; i < octeon_dev->ifcount; i++) {
resp_size = sizeof(struct liquidio_if_cfg_resp);
ctx_size = sizeof(struct liquidio_if_cfg_context);
data_size = sizeof(struct lio_version);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
sc = (struct octeon_soft_command *)
octeon_alloc_soft_command(octeon_dev, data_size,
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
resp_size, ctx_size);
resp = (struct liquidio_if_cfg_resp *)sc->virtrptr;
ctx = (struct liquidio_if_cfg_context *)sc->ctxptr;
vdata = (struct lio_version *)sc->virtdptr;
*((u64 *)vdata) = 0;
vdata->major = cpu_to_be16(LIQUIDIO_BASE_MAJOR_VERSION);
vdata->minor = cpu_to_be16(LIQUIDIO_BASE_MINOR_VERSION);
vdata->micro = cpu_to_be16(LIQUIDIO_BASE_MICRO_VERSION);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
if (OCTEON_CN23XX_PF(octeon_dev)) {
num_iqueues = octeon_dev->sriov_info.num_pf_rings;
num_oqueues = octeon_dev->sriov_info.num_pf_rings;
base_queue = octeon_dev->sriov_info.pf_srn;
gmx_port_id = octeon_dev->pf_num;
ifidx_or_pfnum = octeon_dev->pf_num;
} else {
num_iqueues = CFG_GET_NUM_TXQS_NIC_IF(
octeon_get_conf(octeon_dev), i);
num_oqueues = CFG_GET_NUM_RXQS_NIC_IF(
octeon_get_conf(octeon_dev), i);
base_queue = CFG_GET_BASE_QUE_NIC_IF(
octeon_get_conf(octeon_dev), i);
gmx_port_id = CFG_GET_GMXID_NIC_IF(
octeon_get_conf(octeon_dev), i);
ifidx_or_pfnum = i;
}
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
dev_dbg(&octeon_dev->pci_dev->dev,
"requesting config for interface %d, iqs %d, oqs %d\n",
ifidx_or_pfnum, num_iqueues, num_oqueues);
WRITE_ONCE(ctx->cond, 0);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
ctx->octeon_id = lio_get_device_id(octeon_dev);
init_waitqueue_head(&ctx->wc);
if_cfg.u64 = 0;
if_cfg.s.num_iqueues = num_iqueues;
if_cfg.s.num_oqueues = num_oqueues;
if_cfg.s.base_queue = base_queue;
if_cfg.s.gmx_port_id = gmx_port_id;
sc->iq_no = 0;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
octeon_prepare_soft_command(octeon_dev, sc, OPCODE_NIC,
OPCODE_NIC_IF_CFG, 0,
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
if_cfg.u64, 0);
sc->callback = if_cfg_callback;
sc->callback_arg = sc;
sc->wait_time = 3000;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
retval = octeon_send_soft_command(octeon_dev, sc);
if (retval == IQ_SEND_FAILED) {
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
dev_err(&octeon_dev->pci_dev->dev,
"iq/oq config failed status: %x\n",
retval);
/* Soft instr is freed by driver in case of failure. */
goto setup_nic_dev_fail;
}
/* Sleep on a wait queue till the cond flag indicates that the
* response arrived or timed-out.
*/
if (sleep_cond(&ctx->wc, &ctx->cond) == -EINTR) {
dev_err(&octeon_dev->pci_dev->dev, "Wait interrupted\n");
goto setup_nic_wait_intr;
}
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
retval = resp->status;
if (retval) {
dev_err(&octeon_dev->pci_dev->dev, "iq/oq config failed\n");
goto setup_nic_dev_fail;
}
octeon_swap_8B_data((u64 *)(&resp->cfg_info),
(sizeof(struct liquidio_if_cfg_info)) >> 3);
num_iqueues = hweight64(resp->cfg_info.iqmask);
num_oqueues = hweight64(resp->cfg_info.oqmask);
if (!(num_iqueues) || !(num_oqueues)) {
dev_err(&octeon_dev->pci_dev->dev,
"Got bad iqueues (%016llx) or oqueues (%016llx) from firmware.\n",
resp->cfg_info.iqmask,
resp->cfg_info.oqmask);
goto setup_nic_dev_fail;
}
dev_dbg(&octeon_dev->pci_dev->dev,
"interface %d, iqmask %016llx, oqmask %016llx, numiqueues %d, numoqueues %d\n",
i, resp->cfg_info.iqmask, resp->cfg_info.oqmask,
num_iqueues, num_oqueues);
netdev = alloc_etherdev_mq(LIO_SIZE, num_iqueues);
if (!netdev) {
dev_err(&octeon_dev->pci_dev->dev, "Device allocation failed\n");
goto setup_nic_dev_fail;
}
SET_NETDEV_DEV(netdev, &octeon_dev->pci_dev->dev);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
/* Associate the routines that will handle different
* netdev tasks.
*/
netdev->netdev_ops = &lionetdevops;
lio = GET_LIO(netdev);
memset(lio, 0, sizeof(struct lio));
lio->ifidx = ifidx_or_pfnum;
props = &octeon_dev->props[i];
props->gmxport = resp->cfg_info.linfo.gmxport;
props->netdev = netdev;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
lio->linfo.num_rxpciq = num_oqueues;
lio->linfo.num_txpciq = num_iqueues;
for (j = 0; j < num_oqueues; j++) {
lio->linfo.rxpciq[j].u64 =
resp->cfg_info.linfo.rxpciq[j].u64;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
}
for (j = 0; j < num_iqueues; j++) {
lio->linfo.txpciq[j].u64 =
resp->cfg_info.linfo.txpciq[j].u64;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
}
lio->linfo.hw_addr = resp->cfg_info.linfo.hw_addr;
lio->linfo.gmxport = resp->cfg_info.linfo.gmxport;
lio->linfo.link.u64 = resp->cfg_info.linfo.link.u64;
lio->msg_enable = netif_msg_init(debug, DEFAULT_MSG_ENABLE);
if (OCTEON_CN23XX_PF(octeon_dev) ||
OCTEON_CN6XXX(octeon_dev)) {
lio->dev_capability = NETIF_F_HIGHDMA
| NETIF_F_IP_CSUM
| NETIF_F_IPV6_CSUM
| NETIF_F_SG | NETIF_F_RXCSUM
| NETIF_F_GRO
| NETIF_F_TSO | NETIF_F_TSO6
| NETIF_F_LRO;
}
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
netif_set_gso_max_size(netdev, OCTNIC_GSO_MAX_SIZE);
/* Copy of transmit encapsulation capabilities:
* TSO, TSO6, Checksums for this device
*/
lio->enc_dev_capability = NETIF_F_IP_CSUM
| NETIF_F_IPV6_CSUM
| NETIF_F_GSO_UDP_TUNNEL
| NETIF_F_HW_CSUM | NETIF_F_SG
| NETIF_F_RXCSUM
| NETIF_F_TSO | NETIF_F_TSO6
| NETIF_F_LRO;
netdev->hw_enc_features = (lio->enc_dev_capability &
~NETIF_F_LRO);
lio->dev_capability |= NETIF_F_GSO_UDP_TUNNEL;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
netdev->vlan_features = lio->dev_capability;
/* Add any unchangeable hw features */
lio->dev_capability |= NETIF_F_HW_VLAN_CTAG_FILTER |
NETIF_F_HW_VLAN_CTAG_RX |
NETIF_F_HW_VLAN_CTAG_TX;
netdev->features = (lio->dev_capability & ~NETIF_F_LRO);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
netdev->hw_features = lio->dev_capability;
/*HW_VLAN_RX and HW_VLAN_FILTER is always on*/
netdev->hw_features = netdev->hw_features &
~NETIF_F_HW_VLAN_CTAG_RX;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
/* MTU range: 68 - 16000 */
netdev->min_mtu = LIO_MIN_MTU_SIZE;
netdev->max_mtu = LIO_MAX_MTU_SIZE;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
/* Point to the properties for octeon device to which this
* interface belongs.
*/
lio->oct_dev = octeon_dev;
lio->octprops = props;
lio->netdev = netdev;
dev_dbg(&octeon_dev->pci_dev->dev,
"if%d gmx: %d hw_addr: 0x%llx\n", i,
lio->linfo.gmxport, CVM_CAST64(lio->linfo.hw_addr));
for (j = 0; j < octeon_dev->sriov_info.max_vfs; j++) {
u8 vfmac[ETH_ALEN];
random_ether_addr(&vfmac[0]);
if (__liquidio_set_vf_mac(netdev, j,
&vfmac[0], false)) {
dev_err(&octeon_dev->pci_dev->dev,
"Error setting VF%d MAC address\n",
j);
goto setup_nic_dev_fail;
}
}
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
/* 64-bit swap required on LE machines */
octeon_swap_8B_data(&lio->linfo.hw_addr, 1);
for (j = 0; j < 6; j++)
mac[j] = *((u8 *)(((u8 *)&lio->linfo.hw_addr) + 2 + j));
/* Copy MAC Address to OS network device structure */
ether_addr_copy(netdev->dev_addr, mac);
/* By default all interfaces on a single Octeon uses the same
* tx and rx queues
*/
lio->txq = lio->linfo.txpciq[0].s.q_no;
lio->rxq = lio->linfo.rxpciq[0].s.q_no;
if (setup_io_queues(octeon_dev, i)) {
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
dev_err(&octeon_dev->pci_dev->dev, "I/O queues creation failed\n");
goto setup_nic_dev_fail;
}
ifstate_set(lio, LIO_IFSTATE_DROQ_OPS);
lio->tx_qsize = octeon_get_tx_qsize(octeon_dev, lio->txq);
lio->rx_qsize = octeon_get_rx_qsize(octeon_dev, lio->rxq);
if (setup_glists(octeon_dev, lio, num_iqueues)) {
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
dev_err(&octeon_dev->pci_dev->dev,
"Gather list allocation failed\n");
goto setup_nic_dev_fail;
}
/* Register ethtool support */
liquidio_set_ethtool_ops(netdev);
if (lio->oct_dev->chip_id == OCTEON_CN23XX_PF_VID)
octeon_dev->priv_flags = OCT_PRIV_FLAG_DEFAULT;
else
octeon_dev->priv_flags = 0x0;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
if (netdev->features & NETIF_F_LRO)
liquidio_set_feature(netdev, OCTNET_CMD_LRO_ENABLE,
OCTNIC_LROIPV4 | OCTNIC_LROIPV6);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
liquidio_set_feature(netdev, OCTNET_CMD_VLAN_FILTER_CTL,
OCTNET_CMD_VLAN_FILTER_ENABLE);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
if ((debug != -1) && (debug & NETIF_MSG_HW))
liquidio_set_feature(netdev,
OCTNET_CMD_VERBOSE_ENABLE, 0);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
if (setup_link_status_change_wq(netdev))
goto setup_nic_dev_fail;
if (setup_rx_oom_poll_fn(netdev))
goto setup_nic_dev_fail;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
/* Register the network device with the OS */
if (register_netdev(netdev)) {
dev_err(&octeon_dev->pci_dev->dev, "Device registration failed\n");
goto setup_nic_dev_fail;
}
dev_dbg(&octeon_dev->pci_dev->dev,
"Setup NIC ifidx:%d mac:%02x%02x%02x%02x%02x%02x\n",
i, mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
netif_carrier_off(netdev);
lio->link_changes++;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
ifstate_set(lio, LIO_IFSTATE_REGISTERED);
/* Sending command to firmware to enable Rx checksum offload
* by default at the time of setup of Liquidio driver for
* this device
*/
liquidio_set_rxcsum_command(netdev, OCTNET_CMD_TNL_RX_CSUM_CTL,
OCTNET_CMD_RXCSUM_ENABLE);
liquidio_set_feature(netdev, OCTNET_CMD_TNL_TX_CSUM_CTL,
OCTNET_CMD_TXCSUM_ENABLE);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
dev_dbg(&octeon_dev->pci_dev->dev,
"NIC ifidx:%d Setup successful\n", i);
octeon_free_soft_command(octeon_dev, sc);
}
return 0;
setup_nic_dev_fail:
octeon_free_soft_command(octeon_dev, sc);
setup_nic_wait_intr:
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
while (i--) {
dev_err(&octeon_dev->pci_dev->dev,
"NIC ifidx:%d Setup failed\n", i);
liquidio_destroy_nic_device(octeon_dev, i);
}
return -ENODEV;
}
#ifdef CONFIG_PCI_IOV
static int octeon_enable_sriov(struct octeon_device *oct)
{
unsigned int num_vfs_alloced = oct->sriov_info.num_vfs_alloced;
struct pci_dev *vfdev;
int err;
u32 u;
if (OCTEON_CN23XX_PF(oct) && num_vfs_alloced) {
err = pci_enable_sriov(oct->pci_dev,
oct->sriov_info.num_vfs_alloced);
if (err) {
dev_err(&oct->pci_dev->dev,
"OCTEON: Failed to enable PCI sriov: %d\n",
err);
oct->sriov_info.num_vfs_alloced = 0;
return err;
}
oct->sriov_info.sriov_enabled = 1;
/* init lookup table that maps DPI ring number to VF pci_dev
* struct pointer
*/
u = 0;
vfdev = pci_get_device(PCI_VENDOR_ID_CAVIUM,
OCTEON_CN23XX_VF_VID, NULL);
while (vfdev) {
if (vfdev->is_virtfn &&
(vfdev->physfn == oct->pci_dev)) {
oct->sriov_info.dpiring_to_vfpcidev_lut[u] =
vfdev;
u += oct->sriov_info.rings_per_vf;
}
vfdev = pci_get_device(PCI_VENDOR_ID_CAVIUM,
OCTEON_CN23XX_VF_VID, vfdev);
}
}
return num_vfs_alloced;
}
static int lio_pci_sriov_disable(struct octeon_device *oct)
{
int u;
if (pci_vfs_assigned(oct->pci_dev)) {
dev_err(&oct->pci_dev->dev, "VFs are still assigned to VMs.\n");
return -EPERM;
}
pci_disable_sriov(oct->pci_dev);
u = 0;
while (u < MAX_POSSIBLE_VFS) {
oct->sriov_info.dpiring_to_vfpcidev_lut[u] = NULL;
u += oct->sriov_info.rings_per_vf;
}
oct->sriov_info.num_vfs_alloced = 0;
dev_info(&oct->pci_dev->dev, "oct->pf_num:%d disabled VFs\n",
oct->pf_num);
return 0;
}
static int liquidio_enable_sriov(struct pci_dev *dev, int num_vfs)
{
struct octeon_device *oct = pci_get_drvdata(dev);
int ret = 0;
if ((num_vfs == oct->sriov_info.num_vfs_alloced) &&
(oct->sriov_info.sriov_enabled)) {
dev_info(&oct->pci_dev->dev, "oct->pf_num:%d already enabled num_vfs:%d\n",
oct->pf_num, num_vfs);
return 0;
}
if (!num_vfs) {
ret = lio_pci_sriov_disable(oct);
} else if (num_vfs > oct->sriov_info.max_vfs) {
dev_err(&oct->pci_dev->dev,
"OCTEON: Max allowed VFs:%d user requested:%d",
oct->sriov_info.max_vfs, num_vfs);
ret = -EPERM;
} else {
oct->sriov_info.num_vfs_alloced = num_vfs;
ret = octeon_enable_sriov(oct);
dev_info(&oct->pci_dev->dev, "oct->pf_num:%d num_vfs:%d\n",
oct->pf_num, num_vfs);
}
return ret;
}
#endif
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
/**
* \brief initialize the NIC
* @param oct octeon device
*
* This initialization routine is called once the Octeon device application is
* up and running
*/
static int liquidio_init_nic_module(struct octeon_device *oct)
{
int i, retval = 0;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
int num_nic_ports = CFG_GET_NUM_NIC_PORTS(octeon_get_conf(oct));
dev_dbg(&oct->pci_dev->dev, "Initializing network interfaces\n");
/* only default iq and oq were initialized
* initialize the rest as well
*/
/* run port_config command for each port */
oct->ifcount = num_nic_ports;
memset(oct->props, 0, sizeof(struct octdev_props) * num_nic_ports);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
for (i = 0; i < MAX_OCTEON_LINKS; i++)
oct->props[i].gmxport = -1;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
retval = setup_nic_devices(oct);
if (retval) {
dev_err(&oct->pci_dev->dev, "Setup NIC devices failed\n");
goto octnet_init_failure;
}
liquidio_ptp_init(oct);
dev_dbg(&oct->pci_dev->dev, "Network interfaces ready\n");
return retval;
octnet_init_failure:
oct->ifcount = 0;
return retval;
}
/**
* \brief starter callback that invokes the remaining initialization work after
* the NIC is up and running.
* @param octptr work struct work_struct
*/
static void nic_starter(struct work_struct *work)
{
struct octeon_device *oct;
struct cavium_wk *wk = (struct cavium_wk *)work;
oct = (struct octeon_device *)wk->ctxptr;
if (atomic_read(&oct->status) == OCT_DEV_RUNNING)
return;
/* If the status of the device is CORE_OK, the core
* application has reported its application type. Call
* any registered handlers now and move to the RUNNING
* state.
*/
if (atomic_read(&oct->status) != OCT_DEV_CORE_OK) {
schedule_delayed_work(&oct->nic_poll_work.work,
LIQUIDIO_STARTER_POLL_INTERVAL_MS);
return;
}
atomic_set(&oct->status, OCT_DEV_RUNNING);
if (oct->app_mode && oct->app_mode == CVM_DRV_NIC_APP) {
dev_dbg(&oct->pci_dev->dev, "Starting NIC module\n");
if (liquidio_init_nic_module(oct))
dev_err(&oct->pci_dev->dev, "NIC initialization failed\n");
else
handshake[oct->octeon_id].started_ok = 1;
} else {
dev_err(&oct->pci_dev->dev,
"Unexpected application running on NIC (%d). Check firmware.\n",
oct->app_mode);
}
complete(&handshake[oct->octeon_id].started);
}
static int
octeon_recv_vf_drv_notice(struct octeon_recv_info *recv_info, void *buf)
{
struct octeon_device *oct = (struct octeon_device *)buf;
struct octeon_recv_pkt *recv_pkt = recv_info->recv_pkt;
int i, notice, vf_idx;
liquidio: fix Octeon core watchdog timeout false alarm Detection of watchdog timeout of Octeon cores is flawed and susceptible to false alarms. Refactor by removing the detection code, and in its place, leverage existing code that monitors for an indication from the NIC firmware that an Octeon core crashed; expand the meaning of the indication to "an Octeon core crashed or its watchdog timer expired". Detection of watchdog timeout is now delegated to an exception handler in the NIC firmware; this is free of false alarms. Also if there's an Octeon core crash or watchdog timeout: (1) Disable VF Ethernet links. (2) Decrement the module refcount by an amount equal to the number of active VFs of the NIC whose Octeon core crashed or had a watchdog timeout. The refcount will continue to reflect the active VFs of other liquidio NIC(s) (if present) whose Octeon cores are faultless. Item (2) is needed to avoid the case of not being able to unload the driver because the module refcount is stuck at some non-zero number. There is code that, in normal cases, decrements the refcount upon receiving a message from the firmware that a VF driver was unloaded. But in exceptional cases like an Octeon core crash or watchdog timeout, arrival of that particular message from the firmware might be unreliable. That normal case code is changed to not touch the refcount in the exceptional case to avoid contention (over the refcount) with the liquidio_watchdog kernel thread who will carry out item (2). Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-04 20:26:57 -06:00
bool cores_crashed;
u64 *data, vf_num;
notice = recv_pkt->rh.r.ossp;
data = (u64 *)(get_rbd(recv_pkt->buffer_ptr[0]) + OCT_DROQ_INFO_SIZE);
/* the first 64-bit word of data is the vf_num */
vf_num = data[0];
octeon_swap_8B_data(&vf_num, 1);
vf_idx = (int)vf_num - 1;
liquidio: fix Octeon core watchdog timeout false alarm Detection of watchdog timeout of Octeon cores is flawed and susceptible to false alarms. Refactor by removing the detection code, and in its place, leverage existing code that monitors for an indication from the NIC firmware that an Octeon core crashed; expand the meaning of the indication to "an Octeon core crashed or its watchdog timer expired". Detection of watchdog timeout is now delegated to an exception handler in the NIC firmware; this is free of false alarms. Also if there's an Octeon core crash or watchdog timeout: (1) Disable VF Ethernet links. (2) Decrement the module refcount by an amount equal to the number of active VFs of the NIC whose Octeon core crashed or had a watchdog timeout. The refcount will continue to reflect the active VFs of other liquidio NIC(s) (if present) whose Octeon cores are faultless. Item (2) is needed to avoid the case of not being able to unload the driver because the module refcount is stuck at some non-zero number. There is code that, in normal cases, decrements the refcount upon receiving a message from the firmware that a VF driver was unloaded. But in exceptional cases like an Octeon core crash or watchdog timeout, arrival of that particular message from the firmware might be unreliable. That normal case code is changed to not touch the refcount in the exceptional case to avoid contention (over the refcount) with the liquidio_watchdog kernel thread who will carry out item (2). Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-04 20:26:57 -06:00
cores_crashed = READ_ONCE(oct->cores_crashed);
if (notice == VF_DRV_LOADED) {
if (!(oct->sriov_info.vf_drv_loaded_mask & BIT_ULL(vf_idx))) {
oct->sriov_info.vf_drv_loaded_mask |= BIT_ULL(vf_idx);
dev_info(&oct->pci_dev->dev,
"driver for VF%d was loaded\n", vf_idx);
liquidio: fix Octeon core watchdog timeout false alarm Detection of watchdog timeout of Octeon cores is flawed and susceptible to false alarms. Refactor by removing the detection code, and in its place, leverage existing code that monitors for an indication from the NIC firmware that an Octeon core crashed; expand the meaning of the indication to "an Octeon core crashed or its watchdog timer expired". Detection of watchdog timeout is now delegated to an exception handler in the NIC firmware; this is free of false alarms. Also if there's an Octeon core crash or watchdog timeout: (1) Disable VF Ethernet links. (2) Decrement the module refcount by an amount equal to the number of active VFs of the NIC whose Octeon core crashed or had a watchdog timeout. The refcount will continue to reflect the active VFs of other liquidio NIC(s) (if present) whose Octeon cores are faultless. Item (2) is needed to avoid the case of not being able to unload the driver because the module refcount is stuck at some non-zero number. There is code that, in normal cases, decrements the refcount upon receiving a message from the firmware that a VF driver was unloaded. But in exceptional cases like an Octeon core crash or watchdog timeout, arrival of that particular message from the firmware might be unreliable. That normal case code is changed to not touch the refcount in the exceptional case to avoid contention (over the refcount) with the liquidio_watchdog kernel thread who will carry out item (2). Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-04 20:26:57 -06:00
if (!cores_crashed)
try_module_get(THIS_MODULE);
}
} else if (notice == VF_DRV_REMOVED) {
if (oct->sriov_info.vf_drv_loaded_mask & BIT_ULL(vf_idx)) {
oct->sriov_info.vf_drv_loaded_mask &= ~BIT_ULL(vf_idx);
dev_info(&oct->pci_dev->dev,
"driver for VF%d was removed\n", vf_idx);
liquidio: fix Octeon core watchdog timeout false alarm Detection of watchdog timeout of Octeon cores is flawed and susceptible to false alarms. Refactor by removing the detection code, and in its place, leverage existing code that monitors for an indication from the NIC firmware that an Octeon core crashed; expand the meaning of the indication to "an Octeon core crashed or its watchdog timer expired". Detection of watchdog timeout is now delegated to an exception handler in the NIC firmware; this is free of false alarms. Also if there's an Octeon core crash or watchdog timeout: (1) Disable VF Ethernet links. (2) Decrement the module refcount by an amount equal to the number of active VFs of the NIC whose Octeon core crashed or had a watchdog timeout. The refcount will continue to reflect the active VFs of other liquidio NIC(s) (if present) whose Octeon cores are faultless. Item (2) is needed to avoid the case of not being able to unload the driver because the module refcount is stuck at some non-zero number. There is code that, in normal cases, decrements the refcount upon receiving a message from the firmware that a VF driver was unloaded. But in exceptional cases like an Octeon core crash or watchdog timeout, arrival of that particular message from the firmware might be unreliable. That normal case code is changed to not touch the refcount in the exceptional case to avoid contention (over the refcount) with the liquidio_watchdog kernel thread who will carry out item (2). Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-04 20:26:57 -06:00
if (!cores_crashed)
module_put(THIS_MODULE);
}
} else if (notice == VF_DRV_MACADDR_CHANGED) {
u8 *b = (u8 *)&data[1];
oct->sriov_info.vf_macaddr[vf_idx] = data[1];
dev_info(&oct->pci_dev->dev,
"VF driver changed VF%d's MAC address to %pM\n",
vf_idx, b + 2);
}
for (i = 0; i < recv_pkt->buffer_count; i++)
recv_buffer_free(recv_pkt->buffer_ptr[i]);
octeon_free_recv_info(recv_info);
return 0;
}
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
/**
* \brief Device initialization for each Octeon device that is probed
* @param octeon_dev octeon device
*/
static int octeon_device_init(struct octeon_device *octeon_dev)
{
int j, ret;
int fw_loaded = 0;
char bootcmd[] = "\n";
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
struct octeon_device_priv *oct_priv =
(struct octeon_device_priv *)octeon_dev->priv;
atomic_set(&octeon_dev->status, OCT_DEV_BEGIN_STATE);
/* Enable access to the octeon device and make its DMA capability
* known to the OS.
*/
if (octeon_pci_os_setup(octeon_dev))
return 1;
atomic_set(&octeon_dev->status, OCT_DEV_PCI_ENABLE_DONE);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
/* Identify the Octeon type and map the BAR address space. */
if (octeon_chip_specific_setup(octeon_dev)) {
dev_err(&octeon_dev->pci_dev->dev, "Chip specific setup failed\n");
return 1;
}
atomic_set(&octeon_dev->status, OCT_DEV_PCI_MAP_DONE);
/* Only add a reference after setting status 'OCT_DEV_PCI_MAP_DONE',
* since that is what is required for the reference to be removed
* during de-initialization (see 'octeon_destroy_resources').
*/
octeon_register_device(octeon_dev, octeon_dev->pci_dev->bus->number,
PCI_SLOT(octeon_dev->pci_dev->devfn),
PCI_FUNC(octeon_dev->pci_dev->devfn),
true);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
octeon_dev->app_mode = CVM_DRV_INVALID_APP;
if (OCTEON_CN23XX_PF(octeon_dev)) {
if (!cn23xx_fw_loaded(octeon_dev)) {
fw_loaded = 0;
if (!fw_type_is_none()) {
/* Do a soft reset of the Octeon device. */
if (octeon_dev->fn_list.soft_reset(octeon_dev))
return 1;
/* things might have changed */
if (!cn23xx_fw_loaded(octeon_dev))
fw_loaded = 0;
else
fw_loaded = 1;
}
} else {
fw_loaded = 1;
}
} else if (octeon_dev->fn_list.soft_reset(octeon_dev)) {
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
return 1;
}
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
/* Initialize the dispatch mechanism used to push packets arriving on
* Octeon Output queues.
*/
if (octeon_init_dispatch_list(octeon_dev))
return 1;
octeon_register_dispatch_fn(octeon_dev, OPCODE_NIC,
OPCODE_NIC_CORE_DRV_ACTIVE,
octeon_core_drv_init,
octeon_dev);
octeon_register_dispatch_fn(octeon_dev, OPCODE_NIC,
OPCODE_NIC_VF_DRV_NOTICE,
octeon_recv_vf_drv_notice, octeon_dev);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
INIT_DELAYED_WORK(&octeon_dev->nic_poll_work.work, nic_starter);
octeon_dev->nic_poll_work.ctxptr = (void *)octeon_dev;
schedule_delayed_work(&octeon_dev->nic_poll_work.work,
LIQUIDIO_STARTER_POLL_INTERVAL_MS);
atomic_set(&octeon_dev->status, OCT_DEV_DISPATCH_INIT_DONE);
if (octeon_set_io_queues_off(octeon_dev)) {
dev_err(&octeon_dev->pci_dev->dev, "setting io queues off failed\n");
return 1;
}
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
if (OCTEON_CN23XX_PF(octeon_dev)) {
ret = octeon_dev->fn_list.setup_device_regs(octeon_dev);
if (ret) {
dev_err(&octeon_dev->pci_dev->dev, "OCTEON: Failed to configure device registers\n");
return ret;
}
}
/* Initialize soft command buffer pool
*/
if (octeon_setup_sc_buffer_pool(octeon_dev)) {
dev_err(&octeon_dev->pci_dev->dev, "sc buffer pool allocation failed\n");
return 1;
}
atomic_set(&octeon_dev->status, OCT_DEV_SC_BUFF_POOL_INIT_DONE);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
/* Setup the data structures that manage this Octeon's Input queues. */
if (octeon_setup_instr_queues(octeon_dev)) {
dev_err(&octeon_dev->pci_dev->dev,
"instruction queue initialization failed\n");
return 1;
}
atomic_set(&octeon_dev->status, OCT_DEV_INSTR_QUEUE_INIT_DONE);
/* Initialize lists to manage the requests of different types that
* arrive from user & kernel applications for this octeon device.
*/
if (octeon_setup_response_list(octeon_dev)) {
dev_err(&octeon_dev->pci_dev->dev, "Response list allocation failed\n");
return 1;
}
atomic_set(&octeon_dev->status, OCT_DEV_RESP_LIST_INIT_DONE);
if (octeon_setup_output_queues(octeon_dev)) {
dev_err(&octeon_dev->pci_dev->dev, "Output queue initialization failed\n");
return 1;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
}
atomic_set(&octeon_dev->status, OCT_DEV_DROQ_INIT_DONE);
if (OCTEON_CN23XX_PF(octeon_dev)) {
if (octeon_dev->fn_list.setup_mbox(octeon_dev)) {
dev_err(&octeon_dev->pci_dev->dev, "OCTEON: Mailbox setup failed\n");
return 1;
}
atomic_set(&octeon_dev->status, OCT_DEV_MBOX_SETUP_DONE);
if (octeon_allocate_ioq_vector(octeon_dev)) {
dev_err(&octeon_dev->pci_dev->dev, "OCTEON: ioq vector allocation failed\n");
return 1;
}
atomic_set(&octeon_dev->status, OCT_DEV_MSIX_ALLOC_VECTOR_DONE);
} else {
/* The input and output queue registers were setup earlier (the
* queues were not enabled). Any additional registers
* that need to be programmed should be done now.
*/
ret = octeon_dev->fn_list.setup_device_regs(octeon_dev);
if (ret) {
dev_err(&octeon_dev->pci_dev->dev,
"Failed to configure device registers\n");
return ret;
}
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
}
/* Initialize the tasklet that handles output queue packet processing.*/
dev_dbg(&octeon_dev->pci_dev->dev, "Initializing droq tasklet\n");
tasklet_init(&oct_priv->droq_tasklet, octeon_droq_bh,
(unsigned long)octeon_dev);
/* Setup the interrupt handler and record the INT SUM register address
*/
if (octeon_setup_interrupt(octeon_dev))
return 1;
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
/* Enable Octeon device interrupts */
octeon_dev->fn_list.enable_interrupt(octeon_dev, OCTEON_ALL_INTR);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
atomic_set(&octeon_dev->status, OCT_DEV_INTR_SET_DONE);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
/* Enable the input and output queues for this Octeon device */
ret = octeon_dev->fn_list.enable_io_queues(octeon_dev);
if (ret) {
dev_err(&octeon_dev->pci_dev->dev, "Failed to enable input/output queues");
return ret;
}
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
atomic_set(&octeon_dev->status, OCT_DEV_IO_QUEUES_DONE);
if ((!OCTEON_CN23XX_PF(octeon_dev)) || !fw_loaded) {
dev_dbg(&octeon_dev->pci_dev->dev, "Waiting for DDR initialization...\n");
if (!ddr_timeout) {
dev_info(&octeon_dev->pci_dev->dev,
"WAITING. Set ddr_timeout to non-zero value to proceed with initialization.\n");
}
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
schedule_timeout_uninterruptible(HZ * LIO_RESET_SECS);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
/* Wait for the octeon to initialize DDR after the soft-reset.*/
while (!ddr_timeout) {
set_current_state(TASK_INTERRUPTIBLE);
if (schedule_timeout(HZ / 10)) {
/* user probably pressed Control-C */
return 1;
}
}
ret = octeon_wait_for_ddr_init(octeon_dev, &ddr_timeout);
if (ret) {
dev_err(&octeon_dev->pci_dev->dev,
"DDR not initialized. Please confirm that board is configured to boot from Flash, ret: %d\n",
ret);
return 1;
}
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
if (octeon_wait_for_bootloader(octeon_dev, 1000)) {
dev_err(&octeon_dev->pci_dev->dev, "Board not responding\n");
return 1;
}
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
/* Divert uboot to take commands from host instead. */
ret = octeon_console_send_cmd(octeon_dev, bootcmd, 50);
dev_dbg(&octeon_dev->pci_dev->dev, "Initializing consoles\n");
ret = octeon_init_consoles(octeon_dev);
if (ret) {
dev_err(&octeon_dev->pci_dev->dev, "Could not access board consoles\n");
return 1;
}
ret = octeon_add_console(octeon_dev, 0);
if (ret) {
dev_err(&octeon_dev->pci_dev->dev, "Could not access board console\n");
return 1;
}
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
atomic_set(&octeon_dev->status, OCT_DEV_CONSOLE_INIT_DONE);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
dev_dbg(&octeon_dev->pci_dev->dev, "Loading firmware\n");
ret = load_firmware(octeon_dev);
if (ret) {
dev_err(&octeon_dev->pci_dev->dev, "Could not load firmware to board\n");
return 1;
}
/* set bit 1 of SLI_SCRATCH_1 to indicate that firmware is
* loaded
*/
if (OCTEON_CN23XX_PF(octeon_dev))
octeon_write_csr64(octeon_dev, CN23XX_SLI_SCRATCH1,
2ULL);
Add support of Cavium Liquidio ethernet adapters Following patch V8 adds support for Cavium Liquidio pci express based 10Gig ethernet adapters. 1) Consolidated all debug macros to either call dev_* or netdev_* macros directly, feedback from previous patch. 2) Changed soft commands to avoid crash when running in interrupt context. 3) Fixed link status not reflecting correct status when NetworkManager is running. Added MODULE_FIRMWARE declarations. Following were the previous patches. Patch V7: 1) Minor comments from v6 release regarding debug statements. 2) Fix for large multicast lists. 3) Fixed lockup issue if port initialization fails. 4) Enabled MSI by default. https://patchwork.ozlabs.org/patch/464441/ Patch V6: 1) Addressed the uint64 vs u64 issue, feedback from previous patch. 2) Consolidated some receive processing routines. 3) Removed link status polling method. https://patchwork.ozlabs.org/patch/459514/ Patch V5: Based on the feedback from earlier patches with regards to consolidation of common functions like device init, register programming for cn66xx and cn68xx devices. https://patchwork.ozlabs.org/patch/438979/ Patch V4: Following were the changes based on the feedback from earlier patch: 1) Added mmiowb while synchronizing queue updates and other hw interactions. 2) Statistics will now be incremented non-atomically per each ring. liquidio_get_stats will add stats of each ring while reporting the total statistics counts. 3) Modified liquidio_ioctl to return proper return codes. 4) Modified device naming to use standard Ethernet naming. 5) Global function names in the driver will have lio_/liquidio_/octeon_ prefix. 6) Ethtool related changes for: Removed redundant stats and jiffies. Use default ethtool handler of link status. Speed setting will make use of ethtool_cmd_speed_set. 7) Added checks for pci_map_* return codes. 8) Check for signals while waiting in interruptible mode https://patchwork.ozlabs.org/patch/435073/ Patch v3: Implemented feedback from previous patch like: Removed NAPI Config and DEBUG config options, added BQL and xmit_more support. https://patchwork.ozlabs.org/patch/422749/ Patch V2: Implemented feedback from previous patch. https://patchwork.ozlabs.org/patch/413539/ First Patch: https://patchwork.ozlabs.org/patch/412946/ Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com> Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 19:15:23 -06:00
}
handshake[octeon_dev->octeon_id].init_ok = 1;
complete(&handshake[octeon_dev->octeon_id].init);
atomic_set(&octeon_dev->status, OCT_DEV_HOST_OK);
/* Send Credit for Octeon Output queues. Credits are always sent after
* the output queue is enabled.
*/
for (j = 0; j < octeon_dev->num_oqs; j++)
writel(octeon_dev->droq[j]->max_count,
octeon_dev->droq[j]->pkts_credit_reg);
/* Packets can start arriving on the output queues from this point. */
return 0;
}
/**
* \brief Exits the module
*/
static void __exit liquidio_exit(void)
{
liquidio_deinit_pci();
pr_info("LiquidIO network module is now unloaded\n");
}
module_init(liquidio_init);
module_exit(liquidio_exit);