2016-03-22 21:34:13 -06:00
|
|
|
/*
|
|
|
|
* Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
|
|
* published by the Free Software Foundation.
|
|
|
|
*/
|
|
|
|
|
|
|
|
/*
|
|
|
|
* AM335x ICE V2 board
|
|
|
|
* http://www.ti.com/tool/tmdsice3359
|
|
|
|
*/
|
|
|
|
|
|
|
|
/dts-v1/;
|
|
|
|
|
|
|
|
#include "am33xx.dtsi"
|
|
|
|
|
|
|
|
/ {
|
|
|
|
model = "TI AM3359 ICE-V2";
|
|
|
|
compatible = "ti,am3359-icev2", "ti,am33xx";
|
|
|
|
|
2016-08-31 04:35:30 -06:00
|
|
|
memory@80000000 {
|
2016-03-22 21:34:13 -06:00
|
|
|
device_type = "memory";
|
|
|
|
reg = <0x80000000 0x10000000>; /* 256 MB */
|
|
|
|
};
|
|
|
|
|
2017-01-17 21:03:23 -07:00
|
|
|
chosen {
|
|
|
|
stdout-path = &uart3;
|
|
|
|
};
|
|
|
|
|
2016-08-01 10:46:58 -06:00
|
|
|
vbat: fixedregulator0 {
|
2016-03-22 21:34:13 -06:00
|
|
|
compatible = "regulator-fixed";
|
|
|
|
regulator-name = "vbat";
|
|
|
|
regulator-min-microvolt = <5000000>;
|
|
|
|
regulator-max-microvolt = <5000000>;
|
|
|
|
regulator-boot-on;
|
|
|
|
};
|
|
|
|
|
2016-08-01 10:46:58 -06:00
|
|
|
vtt_fixed: fixedregulator1 {
|
2016-03-22 21:34:13 -06:00
|
|
|
compatible = "regulator-fixed";
|
|
|
|
regulator-name = "vtt";
|
|
|
|
regulator-min-microvolt = <1500000>;
|
|
|
|
regulator-max-microvolt = <1500000>;
|
|
|
|
gpio = <&gpio0 18 GPIO_ACTIVE_HIGH>;
|
|
|
|
regulator-always-on;
|
|
|
|
regulator-boot-on;
|
|
|
|
enable-active-high;
|
|
|
|
};
|
|
|
|
|
2016-10-07 08:44:23 -06:00
|
|
|
leds-iio {
|
|
|
|
status = "disabled";
|
2016-03-22 21:34:13 -06:00
|
|
|
compatible = "gpio-leds";
|
2016-10-07 08:44:23 -06:00
|
|
|
led-out0 {
|
2016-03-22 21:34:13 -06:00
|
|
|
label = "out0";
|
|
|
|
gpios = <&tpic2810 0 GPIO_ACTIVE_HIGH>;
|
|
|
|
default-state = "off";
|
|
|
|
};
|
|
|
|
|
2016-10-07 08:44:23 -06:00
|
|
|
led-out1 {
|
2016-03-22 21:34:13 -06:00
|
|
|
label = "out1";
|
|
|
|
gpios = <&tpic2810 1 GPIO_ACTIVE_HIGH>;
|
|
|
|
default-state = "off";
|
|
|
|
};
|
|
|
|
|
2016-10-07 08:44:23 -06:00
|
|
|
led-out2 {
|
2016-03-22 21:34:13 -06:00
|
|
|
label = "out2";
|
|
|
|
gpios = <&tpic2810 2 GPIO_ACTIVE_HIGH>;
|
|
|
|
default-state = "off";
|
|
|
|
};
|
|
|
|
|
2016-10-07 08:44:23 -06:00
|
|
|
led-out3 {
|
2016-03-22 21:34:13 -06:00
|
|
|
label = "out3";
|
|
|
|
gpios = <&tpic2810 3 GPIO_ACTIVE_HIGH>;
|
|
|
|
default-state = "off";
|
|
|
|
};
|
|
|
|
|
2016-10-07 08:44:23 -06:00
|
|
|
led-out4 {
|
2016-03-22 21:34:13 -06:00
|
|
|
label = "out4";
|
|
|
|
gpios = <&tpic2810 4 GPIO_ACTIVE_HIGH>;
|
|
|
|
default-state = "off";
|
|
|
|
};
|
|
|
|
|
2016-10-07 08:44:23 -06:00
|
|
|
led-out5 {
|
2016-03-22 21:34:13 -06:00
|
|
|
label = "out5";
|
|
|
|
gpios = <&tpic2810 5 GPIO_ACTIVE_HIGH>;
|
|
|
|
default-state = "off";
|
|
|
|
};
|
|
|
|
|
2016-10-07 08:44:23 -06:00
|
|
|
led-out6 {
|
2016-03-22 21:34:13 -06:00
|
|
|
label = "out6";
|
|
|
|
gpios = <&tpic2810 6 GPIO_ACTIVE_HIGH>;
|
|
|
|
default-state = "off";
|
|
|
|
};
|
|
|
|
|
2016-10-07 08:44:23 -06:00
|
|
|
led-out7 {
|
2016-03-22 21:34:13 -06:00
|
|
|
label = "out7";
|
|
|
|
gpios = <&tpic2810 7 GPIO_ACTIVE_HIGH>;
|
|
|
|
default-state = "off";
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
/* Tricolor status LEDs */
|
2016-08-01 10:47:03 -06:00
|
|
|
leds1 {
|
2016-03-22 21:34:13 -06:00
|
|
|
compatible = "gpio-leds";
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&user_leds>;
|
|
|
|
|
2016-08-01 10:47:03 -06:00
|
|
|
led0 {
|
2016-03-22 21:34:13 -06:00
|
|
|
label = "status0:red:cpu0";
|
|
|
|
gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
|
|
|
|
default-state = "off";
|
|
|
|
linux,default-trigger = "cpu0";
|
|
|
|
};
|
|
|
|
|
2016-08-01 10:47:03 -06:00
|
|
|
led1 {
|
2016-03-22 21:34:13 -06:00
|
|
|
label = "status0:green:usr";
|
|
|
|
gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
|
|
|
|
default-state = "off";
|
|
|
|
};
|
|
|
|
|
2016-08-01 10:47:03 -06:00
|
|
|
led2 {
|
2016-03-22 21:34:13 -06:00
|
|
|
label = "status0:yellow:usr";
|
|
|
|
gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>;
|
|
|
|
default-state = "off";
|
|
|
|
};
|
|
|
|
|
2016-08-01 10:47:03 -06:00
|
|
|
led3 {
|
2016-03-22 21:34:13 -06:00
|
|
|
label = "status1:red:mmc0";
|
|
|
|
gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
|
|
|
|
default-state = "off";
|
|
|
|
linux,default-trigger = "mmc0";
|
|
|
|
};
|
|
|
|
|
2016-08-01 10:47:03 -06:00
|
|
|
led4 {
|
2016-03-22 21:34:13 -06:00
|
|
|
label = "status1:green:usr";
|
|
|
|
gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
|
|
|
|
default-state = "off";
|
|
|
|
};
|
|
|
|
|
2016-08-01 10:47:03 -06:00
|
|
|
led5 {
|
2016-03-22 21:34:13 -06:00
|
|
|
label = "status1:yellow:usr";
|
|
|
|
gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>;
|
|
|
|
default-state = "off";
|
|
|
|
};
|
|
|
|
};
|
2016-08-24 01:58:59 -06:00
|
|
|
gpio-decoder {
|
|
|
|
compatible = "gpio-decoder";
|
|
|
|
gpios = <&pca9536 3 GPIO_ACTIVE_HIGH>,
|
|
|
|
<&pca9536 2 GPIO_ACTIVE_HIGH>,
|
|
|
|
<&pca9536 1 GPIO_ACTIVE_HIGH>,
|
|
|
|
<&pca9536 0 GPIO_ACTIVE_HIGH>;
|
|
|
|
linux,axis = <0>; /* ABS_X */
|
|
|
|
decoder-max-value = <9>;
|
|
|
|
};
|
2016-03-22 21:34:13 -06:00
|
|
|
};
|
|
|
|
|
|
|
|
&am33xx_pinmux {
|
|
|
|
user_leds: user_leds {
|
|
|
|
pinctrl-single,pins = <
|
|
|
|
AM33XX_IOPAD(0x91c, PIN_OUTPUT | MUX_MODE7) /* (J18) gmii1_txd3.gpio0[16] */
|
|
|
|
AM33XX_IOPAD(0x920, PIN_OUTPUT | MUX_MODE7) /* (K15) gmii1_txd2.gpio0[17] */
|
|
|
|
AM33XX_IOPAD(0x9b0, PIN_OUTPUT | MUX_MODE7) /* (A15) xdma_event_intr0.gpio0[19] */
|
|
|
|
AM33XX_IOPAD(0x9b4, PIN_OUTPUT | MUX_MODE7) /* (D14) xdma_event_intr1.gpio0[20] */
|
|
|
|
AM33XX_IOPAD(0x880, PIN_OUTPUT | MUX_MODE7) /* (U9) gpmc_csn1.gpio1[30] */
|
|
|
|
AM33XX_IOPAD(0x92c, PIN_OUTPUT | MUX_MODE7) /* (K18) gmii1_txclk.gpio3[9] */
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
mmc0_pins_default: mmc0_pins_default {
|
|
|
|
pinctrl-single,pins = <
|
|
|
|
AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* (F17) mmc0_dat3.mmc0_dat3 */
|
|
|
|
AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* (F18) mmc0_dat2.mmc0_dat2 */
|
|
|
|
AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* (G15) mmc0_dat1.mmc0_dat1 */
|
|
|
|
AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* (G16) mmc0_dat0.mmc0_dat0 */
|
|
|
|
AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* (G17) mmc0_clk.mmc0_clk */
|
|
|
|
AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* (G18) mmc0_cmd.mmc0_cmd */
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
i2c0_pins_default: i2c0_pins_default {
|
|
|
|
pinctrl-single,pins = <
|
|
|
|
AM33XX_IOPAD(0x988, PIN_INPUT | MUX_MODE0) /* (C17) I2C0_SDA.I2C0_SDA */
|
|
|
|
AM33XX_IOPAD(0x98c, PIN_INPUT | MUX_MODE0) /* (C16) I2C0_SCL.I2C0_SCL */
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
spi0_pins_default: spi0_pins_default {
|
|
|
|
pinctrl-single,pins = <
|
|
|
|
AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE0) /* (A17) spi0_sclk.spi0_sclk */
|
|
|
|
AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0) /* (B17) spi0_d0.spi0_d0 */
|
|
|
|
AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* (B16) spi0_d1.spi0_d1 */
|
|
|
|
AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE0) /* (A16) spi0_cs0.spi0_cs0 */
|
2016-10-07 08:44:22 -06:00
|
|
|
AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE0) /* (C15) spi0_cs1.spi0_cs1 */
|
|
|
|
AM33XX_IOPAD(0x9a0, PIN_INPUT_PULLUP | MUX_MODE7) /* (B12) mcasp0_aclkr.gpio3[18] */
|
2016-03-22 21:34:13 -06:00
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
uart3_pins_default: uart3_pins_default {
|
|
|
|
pinctrl-single,pins = <
|
|
|
|
AM33XX_IOPAD(0x934, PIN_INPUT_PULLUP | MUX_MODE1) /* (L17) gmii1_rxd3.uart3_rxd */
|
|
|
|
AM33XX_IOPAD(0x938, PIN_OUTPUT_PULLUP | MUX_MODE1) /* (L16) gmii1_rxd2.uart3_txd */
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
&i2c0 {
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&i2c0_pins_default>;
|
|
|
|
|
|
|
|
status = "okay";
|
|
|
|
clock-frequency = <400000>;
|
|
|
|
|
|
|
|
tps: power-controller@2d {
|
|
|
|
reg = <0x2d>;
|
|
|
|
};
|
|
|
|
|
|
|
|
tpic2810: gpio@60 {
|
|
|
|
compatible = "ti,tpic2810";
|
|
|
|
reg = <0x60>;
|
|
|
|
gpio-controller;
|
|
|
|
#gpio-cells = <2>;
|
|
|
|
};
|
2016-05-19 00:47:30 -06:00
|
|
|
|
|
|
|
pca9536: gpio@41 {
|
|
|
|
compatible = "ti,pca9536";
|
|
|
|
reg = <0x41>;
|
|
|
|
gpio-controller;
|
|
|
|
#gpio-cells = <2>;
|
|
|
|
};
|
2016-03-22 21:34:13 -06:00
|
|
|
};
|
|
|
|
|
2016-10-07 08:44:22 -06:00
|
|
|
&spi0 {
|
|
|
|
status = "okay";
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&spi0_pins_default>;
|
|
|
|
|
|
|
|
sn65hvs882@1 {
|
|
|
|
compatible = "pisosr-gpio";
|
|
|
|
gpio-controller;
|
|
|
|
#gpio-cells = <2>;
|
|
|
|
|
|
|
|
load-gpios = <&gpio3 18 GPIO_ACTIVE_LOW>;
|
|
|
|
|
|
|
|
reg = <1>;
|
|
|
|
spi-max-frequency = <1000000>;
|
|
|
|
spi-cpol;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
2016-10-07 08:44:24 -06:00
|
|
|
&tscadc {
|
|
|
|
status = "okay";
|
|
|
|
adc {
|
|
|
|
ti,adc-channels = <1 2 3 4 5 6 7>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
2016-03-22 21:34:13 -06:00
|
|
|
#include "tps65910.dtsi"
|
|
|
|
|
|
|
|
&tps {
|
|
|
|
vcc1-supply = <&vbat>;
|
|
|
|
vcc2-supply = <&vbat>;
|
|
|
|
vcc3-supply = <&vbat>;
|
|
|
|
vcc4-supply = <&vbat>;
|
|
|
|
vcc5-supply = <&vbat>;
|
|
|
|
vcc6-supply = <&vbat>;
|
|
|
|
vcc7-supply = <&vbat>;
|
|
|
|
vccio-supply = <&vbat>;
|
|
|
|
|
|
|
|
regulators {
|
|
|
|
vrtc_reg: regulator@0 {
|
|
|
|
regulator-always-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
vio_reg: regulator@1 {
|
|
|
|
regulator-always-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
vdd1_reg: regulator@2 {
|
|
|
|
regulator-name = "vdd_mpu";
|
|
|
|
regulator-min-microvolt = <912500>;
|
|
|
|
regulator-max-microvolt = <1326000>;
|
|
|
|
regulator-boot-on;
|
|
|
|
regulator-always-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
vdd2_reg: regulator@3 {
|
|
|
|
regulator-name = "vdd_core";
|
|
|
|
regulator-min-microvolt = <912500>;
|
|
|
|
regulator-max-microvolt = <1144000>;
|
|
|
|
regulator-boot-on;
|
|
|
|
regulator-always-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
vdd3_reg: regulator@4 {
|
|
|
|
regulator-always-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
vdig1_reg: regulator@5 {
|
|
|
|
regulator-always-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
vdig2_reg: regulator@6 {
|
|
|
|
regulator-always-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
vpll_reg: regulator@7 {
|
|
|
|
regulator-always-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
vdac_reg: regulator@8 {
|
|
|
|
regulator-always-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
vaux1_reg: regulator@9 {
|
|
|
|
regulator-always-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
vaux2_reg: regulator@10 {
|
|
|
|
regulator-always-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
vaux33_reg: regulator@11 {
|
|
|
|
regulator-always-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
vmmc_reg: regulator@12 {
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
regulator-always-on;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
&mmc1 {
|
|
|
|
status = "okay";
|
|
|
|
vmmc-supply = <&vmmc_reg>;
|
|
|
|
bus-width = <4>;
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&mmc0_pins_default>;
|
|
|
|
};
|
|
|
|
|
|
|
|
&gpio0 {
|
|
|
|
/* Do not idle the GPIO used for holding the VTT regulator */
|
|
|
|
ti,no-reset-on-init;
|
|
|
|
ti,no-idle-on-init;
|
|
|
|
};
|
|
|
|
|
|
|
|
&uart3 {
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&uart3_pins_default>;
|
|
|
|
status = "okay";
|
|
|
|
};
|