275 lines
4.5 KiB
Plaintext
275 lines
4.5 KiB
Plaintext
![]() |
/*
|
||
|
* at91-tse850-3.dts - Device Tree file for the Axentia TSE-850 3.0 board
|
||
|
*
|
||
|
* Copyright (C) 2017 Axentia Technologies AB
|
||
|
*
|
||
|
* Author: Peter Rosin <peda@axentia.se>
|
||
|
*
|
||
|
* Licensed under GPLv2 or later.
|
||
|
*/
|
||
|
/dts-v1/;
|
||
|
#include <dt-bindings/pwm/pwm.h>
|
||
|
#include "at91-linea.dtsi"
|
||
|
|
||
|
/ {
|
||
|
model = "Axentia TSE-850 3.0";
|
||
|
compatible = "axentia,tse850v3", "axentia,linea",
|
||
|
"atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
|
||
|
|
||
|
ahb {
|
||
|
apb {
|
||
|
pinctrl@fffff200 {
|
||
|
tse850 {
|
||
|
pinctrl_usba_vbus: usba-vbus {
|
||
|
atmel,pins =
|
||
|
<AT91_PIOC 31
|
||
|
AT91_PERIPH_GPIO
|
||
|
AT91_PINCTRL_DEGLITCH>;
|
||
|
};
|
||
|
};
|
||
|
};
|
||
|
|
||
|
watchdog@fffffe40 {
|
||
|
status = "okay";
|
||
|
};
|
||
|
};
|
||
|
};
|
||
|
|
||
|
sck: oscillator {
|
||
|
compatible = "fixed-clock";
|
||
|
|
||
|
#clock-cells = <0>;
|
||
|
clock-frequency = <16000000>;
|
||
|
clock-output-names = "sck";
|
||
|
};
|
||
|
|
||
|
reg_3v3: regulator {
|
||
|
compatible = "regulator-fixed";
|
||
|
|
||
|
regulator-name = "3v3-supply";
|
||
|
regulator-min-microvolt = <3300000>;
|
||
|
regulator-max-microvolt = <3300000>;
|
||
|
};
|
||
|
|
||
|
ana: reg-ana {
|
||
|
compatible = "pwm-regulator";
|
||
|
|
||
|
regulator-name = "ANA";
|
||
|
|
||
|
pwms = <&pwm0 2 1000 PWM_POLARITY_INVERTED>;
|
||
|
pwm-dutycycle-unit = <1000>;
|
||
|
pwm-dutycycle-range = <100 1000>;
|
||
|
|
||
|
regulator-min-microvolt = <2000000>;
|
||
|
regulator-max-microvolt = <20000000>;
|
||
|
regulator-ramp-delay = <1000>;
|
||
|
};
|
||
|
|
||
|
sound {
|
||
|
compatible = "axentia,tse850-pcm5142";
|
||
|
|
||
|
axentia,cpu-dai = <&ssc0>;
|
||
|
axentia,audio-codec = <&pcm5142>;
|
||
|
|
||
|
axentia,add-gpios = <&pioA 8 GPIO_ACTIVE_LOW>;
|
||
|
axentia,loop1-gpios = <&pioA 10 GPIO_ACTIVE_LOW>;
|
||
|
axentia,loop2-gpios = <&pioA 11 GPIO_ACTIVE_LOW>;
|
||
|
|
||
|
axentia,ana-supply = <&ana>;
|
||
|
};
|
||
|
|
||
|
dac: dpot-dac {
|
||
|
compatible = "dpot-dac";
|
||
|
vref-supply = <®_3v3>;
|
||
|
io-channels = <&dpot 0>;
|
||
|
io-channel-names = "dpot";
|
||
|
#io-channel-cells = <1>;
|
||
|
};
|
||
|
|
||
|
envelope-detector {
|
||
|
compatible = "axentia,tse850-envelope-detector";
|
||
|
io-channels = <&dac 0>;
|
||
|
io-channel-names = "dac";
|
||
|
|
||
|
interrupt-parent = <&pioA>;
|
||
|
interrupts = <3 IRQ_TYPE_EDGE_RISING>;
|
||
|
interrupt-names = "comp";
|
||
|
};
|
||
|
|
||
|
leds {
|
||
|
compatible = "gpio-leds";
|
||
|
|
||
|
ch1-red {
|
||
|
label = "ch-1:red";
|
||
|
gpios = <&pioA 23 GPIO_ACTIVE_LOW>;
|
||
|
};
|
||
|
ch1-green {
|
||
|
label = "ch-1:green";
|
||
|
gpios = <&pioA 22 GPIO_ACTIVE_LOW>;
|
||
|
};
|
||
|
ch2-red {
|
||
|
label = "ch-2:red";
|
||
|
gpios = <&pioA 21 GPIO_ACTIVE_LOW>;
|
||
|
};
|
||
|
ch2-green {
|
||
|
label = "ch-2:green";
|
||
|
gpios = <&pioA 20 GPIO_ACTIVE_LOW>;
|
||
|
};
|
||
|
data-red {
|
||
|
label = "data:red";
|
||
|
gpios = <&pioA 19 GPIO_ACTIVE_LOW>;
|
||
|
};
|
||
|
data-green {
|
||
|
label = "data:green";
|
||
|
gpios = <&pioA 18 GPIO_ACTIVE_LOW>;
|
||
|
};
|
||
|
alarm-red {
|
||
|
label = "alarm:red";
|
||
|
gpios = <&pioA 17 GPIO_ACTIVE_LOW>;
|
||
|
};
|
||
|
alarm-green {
|
||
|
label = "alarm:green";
|
||
|
gpios = <&pioA 16 GPIO_ACTIVE_LOW>;
|
||
|
};
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&nand0 {
|
||
|
at91bootstrap@0 {
|
||
|
label = "at91bootstrap";
|
||
|
reg = <0x0 0x40000>;
|
||
|
};
|
||
|
|
||
|
barebox@40000 {
|
||
|
label = "bootloader";
|
||
|
reg = <0x40000 0x60000>;
|
||
|
};
|
||
|
|
||
|
bareboxenv@c0000 {
|
||
|
label = "bareboxenv";
|
||
|
reg = <0xc0000 0x40000>;
|
||
|
};
|
||
|
|
||
|
bareboxenv2@100000 {
|
||
|
label = "bareboxenv2";
|
||
|
reg = <0x100000 0x40000>;
|
||
|
};
|
||
|
|
||
|
oftree@180000 {
|
||
|
label = "oftree";
|
||
|
reg = <0x180000 0x20000>;
|
||
|
};
|
||
|
|
||
|
kernel@200000 {
|
||
|
label = "kernel";
|
||
|
reg = <0x200000 0x500000>;
|
||
|
};
|
||
|
|
||
|
rootfs@800000 {
|
||
|
label = "rootfs";
|
||
|
reg = <0x800000 0x0f800000>;
|
||
|
};
|
||
|
|
||
|
ovlfs@10000000 {
|
||
|
label = "ovlfs";
|
||
|
reg = <0x10000000 0x10000000>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&ssc0 {
|
||
|
#sound-dai-cells = <0>;
|
||
|
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&i2c0 {
|
||
|
status = "okay";
|
||
|
|
||
|
jc42@18 {
|
||
|
compatible = "nxp,se97b", "jedec,jc-42.4-temp";
|
||
|
reg = <0x18>;
|
||
|
};
|
||
|
|
||
|
dpot: mcp4651-104@28 {
|
||
|
compatible = "microchip,mcp4651-104";
|
||
|
reg = <0x28>;
|
||
|
#io-channel-cells = <1>;
|
||
|
};
|
||
|
|
||
|
pcm5142: pcm5142@4c {
|
||
|
compatible = "ti,pcm5142";
|
||
|
|
||
|
reg = <0x4c>;
|
||
|
|
||
|
AVDD-supply = <®_3v3>;
|
||
|
DVDD-supply = <®_3v3>;
|
||
|
CPVDD-supply = <®_3v3>;
|
||
|
|
||
|
clocks = <&sck>;
|
||
|
|
||
|
pll-in = <3>;
|
||
|
pll-out = <6>;
|
||
|
};
|
||
|
|
||
|
eeprom@50 {
|
||
|
compatible = "nxp,24c02";
|
||
|
reg = <0x50>;
|
||
|
pagesize = <16>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&usart0 {
|
||
|
status = "okay";
|
||
|
|
||
|
atmel,use-dma-rx;
|
||
|
};
|
||
|
|
||
|
&pwm0 {
|
||
|
status = "okay";
|
||
|
|
||
|
pinctrl-0 = <&pinctrl_pwm0_pwml2_1>;
|
||
|
pinctrl-names = "default";
|
||
|
};
|
||
|
|
||
|
&macb1 {
|
||
|
status = "okay";
|
||
|
|
||
|
phy-mode = "rgmii";
|
||
|
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <0>;
|
||
|
|
||
|
phy0: ethernet-phy@3 {
|
||
|
reg = <3>;
|
||
|
|
||
|
interrupt-parent = <&pioE>;
|
||
|
interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&usb0 {
|
||
|
status = "okay";
|
||
|
|
||
|
pinctrl-names = "default";
|
||
|
pinctrl-0 = <&pinctrl_usba_vbus>;
|
||
|
atmel,vbus-gpio = <&pioC 31 GPIO_ACTIVE_HIGH>;
|
||
|
};
|
||
|
|
||
|
&usb1 {
|
||
|
status = "okay";
|
||
|
|
||
|
num-ports = <1>;
|
||
|
atmel,vbus-gpio = <&pioD 29 GPIO_ACTIVE_HIGH>;
|
||
|
atmel,oc-gpio = <&pioC 15 GPIO_ACTIVE_LOW>;
|
||
|
};
|
||
|
|
||
|
&usb2 {
|
||
|
status = "okay";
|
||
|
};
|
||
|
|
||
|
&dbgu {
|
||
|
status = "okay";
|
||
|
|
||
|
dmas = <0>, <0>; /* Do not use DMA for dbgu */
|
||
|
};
|