2016-03-30 20:48:04 -06:00
|
|
|
/*
|
|
|
|
* Samsung's Exynos3250 based ARTIK5 module device tree source
|
|
|
|
*
|
|
|
|
* Copyright (c) 2016 Samsung Electronics Co., Ltd.
|
|
|
|
* http://www.samsung.com
|
|
|
|
*
|
|
|
|
* Device tree source file for Samsung's ARTIK5 module which is based on
|
|
|
|
* Samsung Exynos3250 SoC.
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
|
|
* published by the Free Software Foundation.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include "exynos3250.dtsi"
|
|
|
|
#include <dt-bindings/clock/samsung,s2mps11.h>
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
|
|
|
|
|
|
/ {
|
|
|
|
compatible = "samsung,artik5", "samsung,exynos3250", "samsung,exynos3";
|
|
|
|
|
|
|
|
chosen {
|
|
|
|
stdout-path = &serial_2;
|
|
|
|
};
|
|
|
|
|
2016-09-01 03:06:54 -06:00
|
|
|
memory@40000000 {
|
2016-09-01 03:06:51 -06:00
|
|
|
device_type = "memory";
|
2016-03-30 20:48:04 -06:00
|
|
|
reg = <0x40000000 0x1ff00000>;
|
|
|
|
};
|
|
|
|
|
|
|
|
firmware@0205f000 {
|
|
|
|
compatible = "samsung,secure-firmware";
|
|
|
|
reg = <0x0205f000 0x1000>;
|
|
|
|
};
|
|
|
|
|
|
|
|
thermal-zones {
|
|
|
|
cpu_thermal: cpu-thermal {
|
|
|
|
cooling-maps {
|
|
|
|
map0 {
|
|
|
|
/* Corresponds to 500MHz */
|
|
|
|
cooling-device = <&cpu0 5 5>;
|
|
|
|
};
|
|
|
|
map1 {
|
|
|
|
/* Corresponds to 200MHz */
|
|
|
|
cooling-device = <&cpu0 8 8>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
&adc {
|
|
|
|
vdd-supply = <&ldo7_reg>;
|
|
|
|
assigned-clocks = <&cmu CLK_SCLK_TSADC>;
|
|
|
|
assigned-clock-rates = <6000000>;
|
|
|
|
};
|
|
|
|
|
|
|
|
&cpu0 {
|
|
|
|
cpu0-supply = <&buck2_reg>;
|
|
|
|
};
|
|
|
|
|
|
|
|
&i2c_0 {
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <0>;
|
|
|
|
samsung,i2c-sda-delay = <100>;
|
|
|
|
samsung,i2c-slave-addr = <0x10>;
|
|
|
|
samsung,i2c-max-bus-freq = <100000>;
|
|
|
|
status = "okay";
|
|
|
|
|
|
|
|
s2mps14_pmic@66 {
|
|
|
|
compatible = "samsung,s2mps14-pmic";
|
|
|
|
interrupt-parent = <&gpx3>;
|
|
|
|
interrupts = <5 IRQ_TYPE_NONE>;
|
|
|
|
reg = <0x66>;
|
|
|
|
|
|
|
|
s2mps14_osc: clocks {
|
|
|
|
compatible = "samsung,s2mps14-clk";
|
|
|
|
#clock-cells = <1>;
|
|
|
|
clock-output-names = "s2mps14_ap", "unused",
|
|
|
|
"s2mps14_bt";
|
|
|
|
};
|
|
|
|
|
|
|
|
regulators {
|
|
|
|
ldo1_reg: LDO1 {
|
|
|
|
/* VDD_ALIVE15x */
|
|
|
|
regulator-name = "VLDO1_1.0V";
|
|
|
|
regulator-min-microvolt = <1000000>;
|
|
|
|
regulator-max-microvolt = <1000000>;
|
|
|
|
regulator-always-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
ldo2_reg: LDO2 {
|
|
|
|
/* VDDQM176 ~ VDDQM185 */
|
|
|
|
regulator-name = "VLDO2_1.2V";
|
|
|
|
regulator-min-microvolt = <1200000>;
|
|
|
|
regulator-max-microvolt = <1200000>;
|
|
|
|
regulator-always-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
ldo3_reg: LDO3 {
|
|
|
|
/*
|
|
|
|
* VDD1_E106 ~ VDD1_E111
|
|
|
|
* DVDD_RTC_AP, DVDD_MMC2_AP
|
|
|
|
*/
|
|
|
|
regulator-name = "VLDO3_1.8V";
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
regulator-always-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
ldo4_reg: LDO4 {
|
|
|
|
/* AVDD_PLL1120 ~ AVDD_PLL11201 */
|
|
|
|
regulator-name = "VLDO4_1.8V";
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
regulator-always-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
ldo5_reg: LDO5 {
|
|
|
|
/* VDDI_PLL_ISO141 ~ VDDI_PLL_ISO142 */
|
|
|
|
regulator-name = "VLDO5_1.0V";
|
|
|
|
regulator-min-microvolt = <1000000>;
|
|
|
|
regulator-max-microvolt = <1000000>;
|
|
|
|
regulator-always-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
ldo6_reg: LDO6 {
|
|
|
|
/* VDD_USB, VDD10_HSIC */
|
|
|
|
regulator-name = "VLDO6_1.0V";
|
|
|
|
regulator-min-microvolt = <1000000>;
|
|
|
|
regulator-max-microvolt = <1000000>;
|
|
|
|
regulator-always-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
ldo7_reg: LDO7 {
|
|
|
|
/*
|
|
|
|
* VDD18P, AVDD18_TS, AVDD18_HSIC, AVDD_PLL2,
|
|
|
|
* AVDD_ADC, AVDD_ABB_0, M4S_VDD18
|
|
|
|
*/
|
|
|
|
regulator-name = "VLDO7_1.8V";
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
regulator-always-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
ldo8_reg: LDO8 {
|
|
|
|
/* AVDD33_UOTG */
|
|
|
|
regulator-name = "VLDO8_3.0V";
|
|
|
|
regulator-min-microvolt = <3000000>;
|
|
|
|
regulator-max-microvolt = <3000000>;
|
|
|
|
regulator-always-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
ldo9_reg: LDO9 {
|
|
|
|
/* VDDQ_E86 ~ VDDQ_E105*/
|
|
|
|
regulator-name = "VLDO9_1.2V";
|
|
|
|
regulator-min-microvolt = <1200000>;
|
|
|
|
regulator-max-microvolt = <1200000>;
|
|
|
|
regulator-always-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
ldo10_reg: LDO10 {
|
|
|
|
regulator-name = "VLDO10_1.0V";
|
|
|
|
regulator-min-microvolt = <1000000>;
|
|
|
|
regulator-max-microvolt = <1000000>;
|
|
|
|
};
|
|
|
|
|
|
|
|
ldo11_reg: LDO11 {
|
|
|
|
/* VDD74 ~ VDD75 */
|
|
|
|
regulator-name = "VLDO11_1.8V";
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
|
|
|
|
};
|
|
|
|
|
|
|
|
ldo12_reg: LDO12 {
|
|
|
|
/* VDD72 ~ VDD73 */
|
|
|
|
regulator-name = "VLDO12_2.8V";
|
|
|
|
regulator-min-microvolt = <2800000>;
|
|
|
|
regulator-max-microvolt = <2800000>;
|
|
|
|
samsung,ext-control-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
|
|
|
|
};
|
|
|
|
|
|
|
|
ldo13_reg: LDO13 {
|
|
|
|
regulator-name = "VLDO13_2.8V";
|
|
|
|
regulator-min-microvolt = <2800000>;
|
|
|
|
regulator-max-microvolt = <2800000>;
|
|
|
|
};
|
|
|
|
|
|
|
|
ldo14_reg: LDO14 {
|
|
|
|
regulator-name = "VLDO14_2.7V";
|
|
|
|
regulator-min-microvolt = <2700000>;
|
|
|
|
regulator-max-microvolt = <2700000>;
|
|
|
|
};
|
|
|
|
|
|
|
|
ldo15_reg: LDO15 {
|
|
|
|
regulator-name = "VLDO_3.3V";
|
|
|
|
regulator-min-microvolt = <3300000>;
|
|
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
};
|
|
|
|
|
|
|
|
ldo16_reg: LDO16 {
|
|
|
|
regulator-name = "VLDO16_3.3V";
|
|
|
|
regulator-min-microvolt = <3300000>;
|
|
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
};
|
|
|
|
|
|
|
|
ldo17_reg: LDO17 {
|
|
|
|
regulator-name = "VLDO17_3.0V";
|
|
|
|
regulator-min-microvolt = <3000000>;
|
|
|
|
regulator-max-microvolt = <3000000>;
|
|
|
|
};
|
|
|
|
|
|
|
|
ldo18_reg: LDO18 {
|
|
|
|
/* DVDD_MMC2_AP */
|
|
|
|
regulator-name = "VLDO18_2.8V";
|
|
|
|
regulator-min-microvolt = <2800000>;
|
|
|
|
regulator-max-microvolt = <2800000>;
|
|
|
|
};
|
|
|
|
|
|
|
|
ldo19_reg: LDO19 {
|
|
|
|
regulator-name = "VLDO19_1.8V";
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
};
|
|
|
|
|
|
|
|
ldo20_reg: LDO20 {
|
|
|
|
regulator-name = "VLDO20_1.8V";
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
};
|
|
|
|
|
|
|
|
ldo21_reg: LDO21 {
|
|
|
|
regulator-name = "VLDO21_1.25V";
|
|
|
|
regulator-min-microvolt = <1250000>;
|
|
|
|
regulator-max-microvolt = <1250000>;
|
|
|
|
};
|
|
|
|
|
|
|
|
ldo22_reg: LDO22 {
|
|
|
|
regulator-name = "VLDO22_1.2V";
|
|
|
|
regulator-min-microvolt = <1200000>;
|
|
|
|
regulator-max-microvolt = <1200000>;
|
|
|
|
};
|
|
|
|
|
|
|
|
ldo23_reg: LDO23 {
|
|
|
|
/* Xi2c3_SDA/SCL, Xi2c7_SDA/SCL, WLAN_SDIO */
|
|
|
|
regulator-name = "VLDO23_1.8V";
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
};
|
|
|
|
|
|
|
|
ldo24_reg: LDO24 {
|
|
|
|
regulator-name = "VLDO24_3.0V";
|
|
|
|
regulator-min-microvolt = <3000000>;
|
|
|
|
regulator-max-microvolt = <3000000>;
|
|
|
|
};
|
|
|
|
|
|
|
|
ldo25_reg: LDO25 {
|
|
|
|
regulator-name = "VLDO25_3.0V";
|
|
|
|
regulator-min-microvolt = <3000000>;
|
|
|
|
regulator-max-microvolt = <3000000>;
|
|
|
|
};
|
|
|
|
|
|
|
|
buck1_reg: BUCK1 {
|
|
|
|
/* VDD_MIF */
|
|
|
|
regulator-name = "VBUCK1_1.0V";
|
|
|
|
regulator-min-microvolt = <800000>;
|
|
|
|
regulator-max-microvolt = <1000000>;
|
|
|
|
regulator-always-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
buck2_reg: BUCK2 {
|
|
|
|
/* VDD_CPU */
|
|
|
|
regulator-name = "VBUCK2_1.2V";
|
|
|
|
regulator-min-microvolt = <850000>;
|
|
|
|
regulator-max-microvolt = <1200000>;
|
|
|
|
regulator-always-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
buck3_reg: BUCK3 {
|
|
|
|
/* VDD_G3D */
|
|
|
|
regulator-name = "VBUCK3_1.0V";
|
|
|
|
regulator-min-microvolt = <850000>;
|
|
|
|
regulator-max-microvolt = <1000000>;
|
|
|
|
regulator-always-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
buck4_reg: BUCK4 {
|
|
|
|
regulator-name = "VBUCK4_1.95V";
|
|
|
|
regulator-min-microvolt = <1950000>;
|
|
|
|
regulator-max-microvolt = <1950000>;
|
|
|
|
regulator-always-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
buck5_reg: BUCK5 {
|
|
|
|
regulator-name = "VBUCK5_1.35V";
|
|
|
|
regulator-min-microvolt = <1350000>;
|
|
|
|
regulator-max-microvolt = <1350000>;
|
|
|
|
regulator-always-on;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
&mshc_0 {
|
|
|
|
num-slots = <1>;
|
|
|
|
non-removable;
|
|
|
|
cap-mmc-highspeed;
|
|
|
|
card-detect-delay = <200>;
|
|
|
|
vmmc-supply = <&ldo12_reg>;
|
|
|
|
clock-frequency = <100000000>;
|
2016-11-03 00:21:32 -06:00
|
|
|
max-frequency = <100000000>;
|
2016-03-30 20:48:04 -06:00
|
|
|
samsung,dw-mshc-ciu-div = <1>;
|
|
|
|
samsung,dw-mshc-sdr-timing = <0 1>;
|
|
|
|
samsung,dw-mshc-ddr-timing = <1 2>;
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
|
|
|
|
bus-width = <8>;
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&rtc {
|
|
|
|
clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>;
|
|
|
|
clock-names = "rtc", "rtc_src";
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&tmu {
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&xusbxti {
|
|
|
|
clock-frequency = <24000000>;
|
|
|
|
};
|