2013-11-07 06:54:27 -07:00
|
|
|
/*
|
|
|
|
* Copyright 2013 Data Modul AG
|
|
|
|
*
|
|
|
|
* The code contained herein is licensed under the GNU General Public
|
|
|
|
* License. You may obtain a copy of the GNU General Public License
|
|
|
|
* Version 2 or later at the following locations:
|
|
|
|
*
|
|
|
|
* http://www.opensource.org/licenses/gpl-license.html
|
|
|
|
* http://www.gnu.org/copyleft/gpl.html
|
|
|
|
*/
|
|
|
|
|
|
|
|
/dts-v1/;
|
|
|
|
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
#include "imx6q.dtsi"
|
|
|
|
|
|
|
|
/ {
|
|
|
|
model = "Data Modul eDM-QMX6 Board";
|
|
|
|
compatible = "dmo,imx6q-edmqmx6", "fsl,imx6q";
|
|
|
|
|
2014-05-07 07:19:00 -06:00
|
|
|
chosen {
|
|
|
|
stdout-path = &uart2;
|
|
|
|
};
|
|
|
|
|
2013-11-07 06:54:27 -07:00
|
|
|
aliases {
|
2014-04-07 08:29:27 -06:00
|
|
|
gpio7 = &stmpe_gpio1;
|
|
|
|
gpio8 = &stmpe_gpio2;
|
|
|
|
stmpe-i2c0 = &stmpe1;
|
|
|
|
stmpe-i2c1 = &stmpe2;
|
2013-11-07 06:54:27 -07:00
|
|
|
};
|
|
|
|
|
|
|
|
memory {
|
|
|
|
reg = <0x10000000 0x80000000>;
|
|
|
|
};
|
|
|
|
|
|
|
|
regulators {
|
|
|
|
compatible = "simple-bus";
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <0>;
|
|
|
|
|
|
|
|
reg_3p3v: regulator@0 {
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
reg = <0>;
|
|
|
|
regulator-name = "3P3V";
|
|
|
|
regulator-min-microvolt = <3300000>;
|
|
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
regulator-always-on;
|
|
|
|
};
|
|
|
|
|
2014-04-07 08:29:25 -06:00
|
|
|
reg_usb_otg_switch: regulator@1 {
|
2013-11-07 06:54:27 -07:00
|
|
|
compatible = "regulator-fixed";
|
|
|
|
reg = <1>;
|
2014-04-07 08:29:25 -06:00
|
|
|
regulator-name = "usb_otg_switch";
|
2013-11-07 06:54:27 -07:00
|
|
|
regulator-min-microvolt = <5000000>;
|
|
|
|
regulator-max-microvolt = <5000000>;
|
|
|
|
gpio = <&gpio7 12 0>;
|
2014-04-07 08:29:25 -06:00
|
|
|
regulator-boot-on;
|
|
|
|
regulator-always-on;
|
2013-11-07 06:54:27 -07:00
|
|
|
};
|
|
|
|
|
|
|
|
reg_usb_host1: regulator@2 {
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
reg = <2>;
|
|
|
|
regulator-name = "usb_host1_en";
|
|
|
|
regulator-min-microvolt = <3300000>;
|
|
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
gpio = <&gpio3 31 0>;
|
|
|
|
enable-active-high;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
gpio-leds {
|
|
|
|
compatible = "gpio-leds";
|
|
|
|
|
|
|
|
led-blue {
|
|
|
|
label = "blue";
|
2014-04-07 08:29:27 -06:00
|
|
|
gpios = <&stmpe_gpio1 8 GPIO_ACTIVE_HIGH>;
|
2013-11-07 06:54:27 -07:00
|
|
|
linux,default-trigger = "heartbeat";
|
|
|
|
};
|
|
|
|
|
|
|
|
led-green {
|
|
|
|
label = "green";
|
2014-04-07 08:29:27 -06:00
|
|
|
gpios = <&stmpe_gpio1 9 GPIO_ACTIVE_HIGH>;
|
2013-11-07 06:54:27 -07:00
|
|
|
};
|
|
|
|
|
|
|
|
led-pink {
|
|
|
|
label = "pink";
|
2014-04-07 08:29:27 -06:00
|
|
|
gpios = <&stmpe_gpio1 10 GPIO_ACTIVE_HIGH>;
|
2013-11-07 06:54:27 -07:00
|
|
|
};
|
|
|
|
|
|
|
|
led-red {
|
|
|
|
label = "red";
|
2014-04-07 08:29:27 -06:00
|
|
|
gpios = <&stmpe_gpio1 11 GPIO_ACTIVE_HIGH>;
|
2013-11-07 06:54:27 -07:00
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
2014-07-01 05:09:01 -06:00
|
|
|
&can1 {
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pinctrl_can1>;
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
2014-05-07 12:09:05 -06:00
|
|
|
&ecspi5 {
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pinctrl_ecspi5>;
|
|
|
|
cs-gpios = <&gpio1 12 0>;
|
|
|
|
status = "okay";
|
|
|
|
|
|
|
|
flash: m25p80@0 {
|
2015-08-16 00:39:17 -06:00
|
|
|
compatible = "m25p80", "jedec,spi-nor";
|
2014-05-07 12:09:05 -06:00
|
|
|
spi-max-frequency = <40000000>;
|
|
|
|
reg = <0>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
2013-11-07 06:54:27 -07:00
|
|
|
&fec {
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pinctrl_enet>;
|
|
|
|
phy-mode = "rgmii";
|
2014-08-11 07:53:11 -06:00
|
|
|
phy-reset-gpios = <&gpio1 25 0>;
|
2013-11-07 06:54:27 -07:00
|
|
|
phy-supply = <&vgen2_1v2_eth>;
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
2014-07-01 05:09:00 -06:00
|
|
|
&i2c1 {
|
|
|
|
clock-frequency = <100000>;
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pinctrl_i2c1>;
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
2013-11-07 06:54:27 -07:00
|
|
|
&i2c2 {
|
|
|
|
clock-frequency = <100000>;
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pinctrl_i2c2
|
2014-04-07 08:29:27 -06:00
|
|
|
&pinctrl_stmpe1
|
2014-05-07 12:09:04 -06:00
|
|
|
&pinctrl_stmpe2
|
|
|
|
&pinctrl_pfuze>;
|
2013-11-07 06:54:27 -07:00
|
|
|
status = "okay";
|
|
|
|
|
|
|
|
pmic: pfuze100@08 {
|
|
|
|
compatible = "fsl,pfuze100";
|
|
|
|
reg = <0x08>;
|
|
|
|
interrupt-parent = <&gpio3>;
|
|
|
|
interrupts = <20 8>;
|
|
|
|
|
|
|
|
regulators {
|
|
|
|
sw1a_reg: sw1ab {
|
|
|
|
regulator-min-microvolt = <300000>;
|
|
|
|
regulator-max-microvolt = <1875000>;
|
|
|
|
regulator-boot-on;
|
|
|
|
regulator-always-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
sw1c_reg: sw1c {
|
|
|
|
regulator-min-microvolt = <300000>;
|
|
|
|
regulator-max-microvolt = <1875000>;
|
|
|
|
regulator-boot-on;
|
|
|
|
regulator-always-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
sw2_reg: sw2 {
|
|
|
|
regulator-min-microvolt = <800000>;
|
|
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
regulator-boot-on;
|
|
|
|
regulator-always-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
sw3a_reg: sw3a {
|
|
|
|
regulator-min-microvolt = <400000>;
|
|
|
|
regulator-max-microvolt = <1975000>;
|
|
|
|
regulator-boot-on;
|
|
|
|
regulator-always-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
sw3b_reg: sw3b {
|
|
|
|
regulator-min-microvolt = <400000>;
|
|
|
|
regulator-max-microvolt = <1975000>;
|
|
|
|
regulator-boot-on;
|
|
|
|
regulator-always-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
sw4_reg: sw4 {
|
|
|
|
regulator-min-microvolt = <400000>;
|
|
|
|
regulator-max-microvolt = <1975000>;
|
|
|
|
regulator-always-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
swbst_reg: swbst {
|
|
|
|
regulator-min-microvolt = <5000000>;
|
|
|
|
regulator-max-microvolt = <5150000>;
|
|
|
|
regulator-always-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
snvs_reg: vsnvs {
|
|
|
|
regulator-min-microvolt = <1000000>;
|
|
|
|
regulator-max-microvolt = <3000000>;
|
|
|
|
regulator-boot-on;
|
|
|
|
regulator-always-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
vref_reg: vrefddr {
|
|
|
|
regulator-boot-on;
|
|
|
|
regulator-always-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
vgen1_reg: vgen1 {
|
|
|
|
regulator-min-microvolt = <800000>;
|
|
|
|
regulator-max-microvolt = <1550000>;
|
|
|
|
};
|
|
|
|
|
|
|
|
vgen2_1v2_eth: vgen2 {
|
|
|
|
regulator-min-microvolt = <800000>;
|
|
|
|
regulator-max-microvolt = <1550000>;
|
|
|
|
};
|
|
|
|
|
|
|
|
vdd_high_in: vgen3 {
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
regulator-boot-on;
|
|
|
|
regulator-always-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
vgen4_reg: vgen4 {
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
regulator-always-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
vgen5_reg: vgen5 {
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
regulator-always-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
vgen6_reg: vgen6 {
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
regulator-always-on;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
2014-04-07 08:29:27 -06:00
|
|
|
stmpe1: stmpe1601@40 {
|
2013-11-07 06:54:27 -07:00
|
|
|
compatible = "st,stmpe1601";
|
|
|
|
reg = <0x40>;
|
|
|
|
interrupts = <30 0>;
|
|
|
|
interrupt-parent = <&gpio3>;
|
2014-04-17 07:28:06 -06:00
|
|
|
vcc-supply = <&sw2_reg>;
|
|
|
|
vio-supply = <&sw2_reg>;
|
2013-11-07 06:54:27 -07:00
|
|
|
|
2014-04-07 08:29:27 -06:00
|
|
|
stmpe_gpio1: stmpe_gpio {
|
|
|
|
#gpio-cells = <2>;
|
|
|
|
compatible = "st,stmpe-gpio";
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
stmpe2: stmpe1601@44 {
|
|
|
|
compatible = "st,stmpe1601";
|
|
|
|
reg = <0x44>;
|
|
|
|
interrupts = <2 0>;
|
|
|
|
interrupt-parent = <&gpio5>;
|
2014-04-17 07:28:06 -06:00
|
|
|
vcc-supply = <&sw2_reg>;
|
|
|
|
vio-supply = <&sw2_reg>;
|
2014-04-07 08:29:27 -06:00
|
|
|
|
|
|
|
stmpe_gpio2: stmpe_gpio {
|
2013-11-07 06:54:27 -07:00
|
|
|
#gpio-cells = <2>;
|
|
|
|
compatible = "st,stmpe-gpio";
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
temp1: ad7414@4c {
|
|
|
|
compatible = "ad,ad7414";
|
|
|
|
reg = <0x4c>;
|
|
|
|
};
|
|
|
|
|
|
|
|
temp2: ad7414@4d {
|
|
|
|
compatible = "ad,ad7414";
|
|
|
|
reg = <0x4d>;
|
|
|
|
};
|
|
|
|
|
|
|
|
rtc: m41t62@68 {
|
2016-06-26 03:34:06 -06:00
|
|
|
compatible = "st,m41t62";
|
2013-11-07 06:54:27 -07:00
|
|
|
reg = <0x68>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
2014-07-01 05:09:00 -06:00
|
|
|
&i2c3 {
|
|
|
|
clock-frequency = <100000>;
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pinctrl_i2c3>;
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
2013-11-07 06:54:27 -07:00
|
|
|
&iomuxc {
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pinctrl_hog>;
|
|
|
|
|
|
|
|
imx6q-dmo-edmqmx6 {
|
|
|
|
pinctrl_hog: hoggrp {
|
|
|
|
fsl,pins = <
|
|
|
|
MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x80000000
|
|
|
|
MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x80000000
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
2014-07-01 05:09:01 -06:00
|
|
|
pinctrl_can1: can1grp {
|
|
|
|
fsl,pins = <
|
|
|
|
MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b0
|
|
|
|
MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
2014-05-07 12:09:05 -06:00
|
|
|
pinctrl_ecspi5: ecspi5rp-1 {
|
|
|
|
fsl,pins = <
|
|
|
|
MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO 0x80000000
|
|
|
|
MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI 0x80000000
|
|
|
|
MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK 0x80000000
|
|
|
|
MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x80000000
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
2013-11-07 06:54:27 -07:00
|
|
|
pinctrl_enet: enetgrp {
|
|
|
|
fsl,pins = <
|
2016-07-08 15:22:54 -06:00
|
|
|
MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
|
|
|
|
MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
|
|
|
|
MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
|
|
|
|
MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
|
|
|
|
MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
|
|
|
|
MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
|
|
|
|
MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
|
|
|
|
MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
|
|
|
|
MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
|
|
|
|
MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
|
|
|
|
MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
|
|
|
|
MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
|
2013-11-07 06:54:27 -07:00
|
|
|
MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
|
|
|
|
MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
|
|
|
|
MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
|
2014-08-11 07:53:11 -06:00
|
|
|
MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0
|
2013-11-07 06:54:27 -07:00
|
|
|
MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
2014-07-01 05:09:00 -06:00
|
|
|
pinctrl_i2c1: i2c1grp {
|
|
|
|
fsl,pins = <
|
|
|
|
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
|
|
|
|
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
2013-11-07 06:54:27 -07:00
|
|
|
pinctrl_i2c2: i2c2grp {
|
|
|
|
fsl,pins = <
|
|
|
|
MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1
|
|
|
|
MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
2014-07-01 05:09:00 -06:00
|
|
|
pinctrl_i2c3: i2c3grp {
|
|
|
|
fsl,pins = <
|
|
|
|
MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
|
|
|
|
MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
2014-07-01 05:08:59 -06:00
|
|
|
pinctrl_pcie: pciegrp {
|
|
|
|
fsl,pins = <
|
|
|
|
MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x100b1
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
2014-05-07 12:09:04 -06:00
|
|
|
pinctrl_pfuze: pfuze100grp1 {
|
|
|
|
fsl,pins = <
|
|
|
|
MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x80000000
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
2014-04-07 08:29:27 -06:00
|
|
|
pinctrl_stmpe1: stmpe1grp {
|
2013-11-07 06:54:27 -07:00
|
|
|
fsl,pins = <MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x80000000>;
|
|
|
|
};
|
|
|
|
|
2014-04-07 08:29:27 -06:00
|
|
|
pinctrl_stmpe2: stmpe2grp {
|
|
|
|
fsl,pins = <MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x80000000>;
|
|
|
|
};
|
|
|
|
|
2013-11-07 06:54:27 -07:00
|
|
|
pinctrl_uart1: uart1grp {
|
|
|
|
fsl,pins = <
|
|
|
|
MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
|
|
|
|
MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_uart2: uart2grp {
|
|
|
|
fsl,pins = <
|
|
|
|
MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
|
|
|
|
MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_usbotg: usbotggrp {
|
|
|
|
fsl,pins = <
|
2014-04-07 08:29:24 -06:00
|
|
|
MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
|
2013-11-07 06:54:27 -07:00
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_usdhc3: usdhc3grp {
|
|
|
|
fsl,pins = <
|
|
|
|
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
|
|
|
|
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
|
|
|
|
MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
|
|
|
|
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
|
|
|
|
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
|
|
|
|
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_usdhc4: usdhc4grp {
|
|
|
|
fsl,pins = <
|
|
|
|
MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
|
|
|
|
MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059
|
|
|
|
MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
|
|
|
|
MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
|
|
|
|
MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
|
|
|
|
MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
|
|
|
|
MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059
|
|
|
|
MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059
|
|
|
|
MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059
|
|
|
|
MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
2014-07-01 05:08:59 -06:00
|
|
|
&pcie {
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pinctrl_pcie>;
|
|
|
|
reset-gpio = <&gpio4 8 0>;
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
2013-11-07 06:54:27 -07:00
|
|
|
&sata {
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&uart1 {
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pinctrl_uart1>;
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&uart2 {
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pinctrl_uart2>;
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&usbh1 {
|
|
|
|
vbus-supply = <®_usb_host1>;
|
|
|
|
disable-over-current;
|
2014-04-07 08:29:26 -06:00
|
|
|
dr_mode = "host";
|
2013-11-07 06:54:27 -07:00
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&usbotg {
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pinctrl_usbotg>;
|
|
|
|
disable-over-current;
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&usdhc3 {
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pinctrl_usdhc3>;
|
|
|
|
vmmc-supply = <®_3p3v>;
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&usdhc4 {
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pinctrl_usdhc4>;
|
|
|
|
vmmc-supply = <®_3p3v>;
|
|
|
|
non-removable;
|
|
|
|
bus-width = <8>;
|
|
|
|
status = "okay";
|
|
|
|
};
|