2014-02-07 00:24:56 -07:00
|
|
|
/*
|
|
|
|
* Copyright 2013 Gateworks Corporation
|
|
|
|
*
|
|
|
|
* The code contained herein is licensed under the GNU General Public
|
|
|
|
* License. You may obtain a copy of the GNU General Public License
|
|
|
|
* Version 2 or later at the following locations:
|
|
|
|
*
|
|
|
|
* http://www.opensource.org/licenses/gpl-license.html
|
|
|
|
* http://www.gnu.org/copyleft/gpl.html
|
|
|
|
*/
|
|
|
|
|
|
|
|
/dts-v1/;
|
2014-09-09 00:07:28 -06:00
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
2014-02-07 00:24:56 -07:00
|
|
|
#include "imx6q.dtsi"
|
|
|
|
|
|
|
|
/ {
|
|
|
|
model = "Gateworks Ventana GW5400-A";
|
|
|
|
compatible = "gw,imx6q-gw5400-a", "gw,ventana", "fsl,imx6q";
|
|
|
|
|
|
|
|
/* these are used by bootloader for disabling nodes */
|
|
|
|
aliases {
|
|
|
|
ethernet1 = ð1;
|
|
|
|
i2c0 = &i2c1;
|
|
|
|
i2c1 = &i2c2;
|
|
|
|
i2c2 = &i2c3;
|
|
|
|
led0 = &led0;
|
|
|
|
led1 = &led1;
|
|
|
|
led2 = &led2;
|
|
|
|
ssi0 = &ssi1;
|
|
|
|
spi0 = &ecspi1;
|
|
|
|
usb0 = &usbh1;
|
|
|
|
usb1 = &usbotg;
|
|
|
|
};
|
|
|
|
|
|
|
|
chosen {
|
|
|
|
bootargs = "console=ttymxc1,115200";
|
|
|
|
};
|
|
|
|
|
|
|
|
leds {
|
|
|
|
compatible = "gpio-leds";
|
2014-09-09 00:07:30 -06:00
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pinctrl_gpio_leds>;
|
2014-02-07 00:24:56 -07:00
|
|
|
|
|
|
|
led0: user1 {
|
|
|
|
label = "user1";
|
2014-09-09 00:07:28 -06:00
|
|
|
gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 -> MX6_PANLEDG */
|
2014-02-07 00:24:56 -07:00
|
|
|
default-state = "on";
|
|
|
|
linux,default-trigger = "heartbeat";
|
|
|
|
};
|
|
|
|
|
|
|
|
led1: user2 {
|
|
|
|
label = "user2";
|
2014-09-09 00:07:28 -06:00
|
|
|
gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>; /* 106 -> MX6_PANLEDR */
|
2014-02-07 00:24:56 -07:00
|
|
|
default-state = "off";
|
|
|
|
};
|
|
|
|
|
|
|
|
led2: user3 {
|
|
|
|
label = "user3";
|
2014-09-09 00:07:28 -06:00
|
|
|
gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* 111 -> MX6_LOCLED# */
|
2014-02-07 00:24:56 -07:00
|
|
|
default-state = "off";
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
memory {
|
|
|
|
reg = <0x10000000 0x40000000>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pps {
|
|
|
|
compatible = "pps-gpio";
|
2014-09-09 00:07:30 -06:00
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pinctrl_gpio_leds>;
|
2014-09-09 00:07:28 -06:00
|
|
|
gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
|
2014-02-07 00:24:56 -07:00
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
regulators {
|
|
|
|
compatible = "simple-bus";
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <0>;
|
|
|
|
|
|
|
|
reg_1p0v: regulator@0 {
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
reg = <0>;
|
|
|
|
regulator-name = "1P0V";
|
|
|
|
regulator-min-microvolt = <1000000>;
|
|
|
|
regulator-max-microvolt = <1000000>;
|
|
|
|
regulator-always-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
reg_3p3v: regulator@1 {
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
reg = <1>;
|
|
|
|
regulator-name = "3P3V";
|
|
|
|
regulator-min-microvolt = <3300000>;
|
|
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
regulator-always-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
reg_usb_h1_vbus: regulator@2 {
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
reg = <2>;
|
|
|
|
regulator-name = "usb_h1_vbus";
|
|
|
|
regulator-min-microvolt = <5000000>;
|
|
|
|
regulator-max-microvolt = <5000000>;
|
|
|
|
regulator-always-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
reg_usb_otg_vbus: regulator@3 {
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
reg = <3>;
|
|
|
|
regulator-name = "usb_otg_vbus";
|
|
|
|
regulator-min-microvolt = <5000000>;
|
|
|
|
regulator-max-microvolt = <5000000>;
|
2014-09-09 00:07:28 -06:00
|
|
|
gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
|
2014-02-07 00:24:56 -07:00
|
|
|
enable-active-high;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
sound {
|
2014-05-22 00:04:54 -06:00
|
|
|
compatible = "fsl,imx6q-ventana-sgtl5000",
|
2014-02-07 00:24:56 -07:00
|
|
|
"fsl,imx-audio-sgtl5000";
|
2014-05-22 00:04:54 -06:00
|
|
|
model = "sgtl5000-audio";
|
2014-02-07 00:24:56 -07:00
|
|
|
ssi-controller = <&ssi1>;
|
|
|
|
audio-codec = <&codec>;
|
|
|
|
audio-routing =
|
|
|
|
"MIC_IN", "Mic Jack",
|
|
|
|
"Mic Jack", "Mic Bias",
|
|
|
|
"Headphone Jack", "HP_OUT";
|
|
|
|
mux-int-port = <1>;
|
|
|
|
mux-ext-port = <4>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
&audmux {
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pinctrl_audmux>;
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&ecspi1 {
|
2014-09-09 00:07:28 -06:00
|
|
|
cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
|
2014-02-07 00:24:56 -07:00
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pinctrl_ecspi1>;
|
|
|
|
status = "okay";
|
|
|
|
|
|
|
|
flash: m25p80@0 {
|
2015-08-16 00:39:17 -06:00
|
|
|
compatible = "sst,w25q256", "jedec,spi-nor";
|
2014-02-07 00:24:56 -07:00
|
|
|
spi-max-frequency = <30000000>;
|
|
|
|
reg = <0>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
&fec {
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pinctrl_enet>;
|
2015-12-11 06:22:04 -07:00
|
|
|
phy-mode = "rgmii-id";
|
2014-09-09 00:07:28 -06:00
|
|
|
phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
|
2014-02-07 00:24:56 -07:00
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
2014-04-23 01:47:51 -06:00
|
|
|
&hdmi {
|
|
|
|
ddc-i2c-bus = <&i2c3>;
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
2014-02-07 00:24:56 -07:00
|
|
|
&i2c1 {
|
|
|
|
clock-frequency = <100000>;
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pinctrl_i2c1>;
|
|
|
|
status = "okay";
|
|
|
|
|
|
|
|
eeprom1: eeprom@50 {
|
|
|
|
compatible = "atmel,24c02";
|
|
|
|
reg = <0x50>;
|
|
|
|
pagesize = <16>;
|
|
|
|
};
|
|
|
|
|
|
|
|
eeprom2: eeprom@51 {
|
|
|
|
compatible = "atmel,24c02";
|
|
|
|
reg = <0x51>;
|
|
|
|
pagesize = <16>;
|
|
|
|
};
|
|
|
|
|
|
|
|
eeprom3: eeprom@52 {
|
|
|
|
compatible = "atmel,24c02";
|
|
|
|
reg = <0x52>;
|
|
|
|
pagesize = <16>;
|
|
|
|
};
|
|
|
|
|
|
|
|
eeprom4: eeprom@53 {
|
|
|
|
compatible = "atmel,24c02";
|
|
|
|
reg = <0x53>;
|
|
|
|
pagesize = <16>;
|
|
|
|
};
|
|
|
|
|
|
|
|
gpio: pca9555@23 {
|
|
|
|
compatible = "nxp,pca9555";
|
|
|
|
reg = <0x23>;
|
|
|
|
gpio-controller;
|
|
|
|
#gpio-cells = <2>;
|
|
|
|
};
|
|
|
|
|
|
|
|
rtc: ds1672@68 {
|
|
|
|
compatible = "dallas,ds1672";
|
|
|
|
reg = <0x68>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
&i2c2 {
|
|
|
|
clock-frequency = <100000>;
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pinctrl_i2c2>;
|
|
|
|
status = "okay";
|
|
|
|
|
|
|
|
pmic: pfuze100@08 {
|
|
|
|
compatible = "fsl,pfuze100";
|
|
|
|
reg = <0x08>;
|
|
|
|
|
|
|
|
regulators {
|
|
|
|
sw1a_reg: sw1ab {
|
|
|
|
regulator-min-microvolt = <300000>;
|
|
|
|
regulator-max-microvolt = <1875000>;
|
|
|
|
regulator-boot-on;
|
|
|
|
regulator-always-on;
|
|
|
|
regulator-ramp-delay = <6250>;
|
|
|
|
};
|
|
|
|
|
|
|
|
sw1c_reg: sw1c {
|
|
|
|
regulator-min-microvolt = <300000>;
|
|
|
|
regulator-max-microvolt = <1875000>;
|
|
|
|
regulator-boot-on;
|
|
|
|
regulator-always-on;
|
|
|
|
regulator-ramp-delay = <6250>;
|
|
|
|
};
|
|
|
|
|
|
|
|
sw2_reg: sw2 {
|
|
|
|
regulator-min-microvolt = <800000>;
|
|
|
|
regulator-max-microvolt = <3950000>;
|
|
|
|
regulator-boot-on;
|
|
|
|
regulator-always-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
sw3a_reg: sw3a {
|
|
|
|
regulator-min-microvolt = <400000>;
|
|
|
|
regulator-max-microvolt = <1975000>;
|
|
|
|
regulator-boot-on;
|
|
|
|
regulator-always-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
sw3b_reg: sw3b {
|
|
|
|
regulator-min-microvolt = <400000>;
|
|
|
|
regulator-max-microvolt = <1975000>;
|
|
|
|
regulator-boot-on;
|
|
|
|
regulator-always-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
sw4_reg: sw4 {
|
|
|
|
regulator-min-microvolt = <800000>;
|
|
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
};
|
|
|
|
|
|
|
|
swbst_reg: swbst {
|
|
|
|
regulator-min-microvolt = <5000000>;
|
|
|
|
regulator-max-microvolt = <5150000>;
|
|
|
|
};
|
|
|
|
|
|
|
|
snvs_reg: vsnvs {
|
|
|
|
regulator-min-microvolt = <1000000>;
|
|
|
|
regulator-max-microvolt = <3000000>;
|
|
|
|
regulator-boot-on;
|
|
|
|
regulator-always-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
vref_reg: vrefddr {
|
|
|
|
regulator-boot-on;
|
|
|
|
regulator-always-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
vgen1_reg: vgen1 {
|
|
|
|
regulator-min-microvolt = <800000>;
|
|
|
|
regulator-max-microvolt = <1550000>;
|
|
|
|
};
|
|
|
|
|
|
|
|
vgen2_reg: vgen2 {
|
|
|
|
regulator-min-microvolt = <800000>;
|
|
|
|
regulator-max-microvolt = <1550000>;
|
|
|
|
};
|
|
|
|
|
|
|
|
vgen3_reg: vgen3 {
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
};
|
|
|
|
|
|
|
|
vgen4_reg: vgen4 {
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
regulator-always-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
vgen5_reg: vgen5 {
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
regulator-always-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
vgen6_reg: vgen6 {
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
regulator-always-on;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
&i2c3 {
|
|
|
|
clock-frequency = <100000>;
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pinctrl_i2c3>;
|
|
|
|
status = "okay";
|
|
|
|
|
|
|
|
accelerometer: mma8450@1c {
|
|
|
|
compatible = "fsl,mma8450";
|
|
|
|
reg = <0x1c>;
|
|
|
|
};
|
|
|
|
|
|
|
|
codec: sgtl5000@0a {
|
|
|
|
compatible = "fsl,sgtl5000";
|
|
|
|
reg = <0x0a>;
|
2016-04-26 19:28:29 -06:00
|
|
|
clocks = <&clks IMX6QDL_CLK_CKO>;
|
2014-02-07 00:24:56 -07:00
|
|
|
VDDA-supply = <&sw4_reg>;
|
|
|
|
VDDIO-supply = <®_3p3v>;
|
|
|
|
};
|
|
|
|
|
|
|
|
touchscreen: egalax_ts@04 {
|
|
|
|
compatible = "eeti,egalax_ts";
|
|
|
|
reg = <0x04>;
|
|
|
|
interrupt-parent = <&gpio7>;
|
2014-09-09 00:07:28 -06:00
|
|
|
interrupts = <12 2>;
|
|
|
|
wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
|
2014-02-07 00:24:56 -07:00
|
|
|
};
|
|
|
|
};
|
|
|
|
|
2014-09-09 00:07:30 -06:00
|
|
|
&ldb {
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&pcie {
|
|
|
|
reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
|
|
|
|
status = "okay";
|
|
|
|
|
|
|
|
eth1: sky2@8 { /* MAC/PHY on bus 8 */
|
|
|
|
compatible = "marvell,sky2";
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
&ssi1 {
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&uart1 {
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pinctrl_uart1>;
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&uart2 {
|
2014-02-07 00:24:56 -07:00
|
|
|
pinctrl-names = "default";
|
2014-09-09 00:07:30 -06:00
|
|
|
pinctrl-0 = <&pinctrl_uart2>;
|
|
|
|
status = "okay";
|
|
|
|
};
|
2014-02-07 00:24:56 -07:00
|
|
|
|
2014-09-09 00:07:30 -06:00
|
|
|
&uart5 {
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pinctrl_uart5>;
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&usbotg {
|
|
|
|
vbus-supply = <®_usb_otg_vbus>;
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pinctrl_usbotg>;
|
|
|
|
disable-over-current;
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&usbh1 {
|
|
|
|
vbus-supply = <®_usb_h1_vbus>;
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&usdhc3 {
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pinctrl_usdhc3>;
|
|
|
|
cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
|
|
|
|
vmmc-supply = <®_3p3v>;
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&iomuxc {
|
2014-02-07 00:24:56 -07:00
|
|
|
imx6q-gw5400-a {
|
|
|
|
|
|
|
|
pinctrl_audmux: audmuxgrp {
|
|
|
|
fsl,pins = <
|
|
|
|
MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0
|
|
|
|
MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0
|
|
|
|
MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0
|
|
|
|
MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0
|
2014-09-09 00:07:30 -06:00
|
|
|
MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */
|
2014-02-07 00:24:56 -07:00
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_ecspi1: ecspi1grp {
|
|
|
|
fsl,pins = <
|
|
|
|
MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
|
|
|
|
MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
|
|
|
|
MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
|
2014-09-09 00:07:30 -06:00
|
|
|
MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b0b0 /* SPINOR_CS0# */
|
2014-02-07 00:24:56 -07:00
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_enet: enetgrp {
|
|
|
|
fsl,pins = <
|
2016-07-08 15:22:54 -06:00
|
|
|
MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
|
|
|
|
MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
|
|
|
|
MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
|
|
|
|
MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
|
|
|
|
MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
|
|
|
|
MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
|
|
|
|
MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
|
|
|
|
MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
|
|
|
|
MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
|
|
|
|
MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
|
|
|
|
MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
|
|
|
|
MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
|
2014-02-07 00:24:56 -07:00
|
|
|
MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
|
|
|
|
MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
|
|
|
|
MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
|
|
|
|
MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
2014-09-09 00:07:30 -06:00
|
|
|
pinctrl_gpio_leds: gpioledsgrp {
|
|
|
|
fsl,pins = <
|
|
|
|
MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 /* user1 led */
|
|
|
|
MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 /* user2 led */
|
|
|
|
MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 /* user3 led */
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
2014-02-07 00:24:56 -07:00
|
|
|
pinctrl_i2c1: i2c1grp {
|
|
|
|
fsl,pins = <
|
|
|
|
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
|
|
|
|
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_i2c2: i2c2grp {
|
|
|
|
fsl,pins = <
|
|
|
|
MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
|
|
|
|
MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_i2c3: i2c3grp {
|
|
|
|
fsl,pins = <
|
|
|
|
MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
|
|
|
|
MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
2014-09-09 00:07:30 -06:00
|
|
|
pinctrl_pcie: pciegrp {
|
|
|
|
fsl,pins = <
|
|
|
|
MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* PCIE IRQ */
|
|
|
|
MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE RST */
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_pps: ppsgrp {
|
|
|
|
fsl,pins = <
|
|
|
|
MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b0 /* GPS_PPS */
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
2014-02-07 00:24:56 -07:00
|
|
|
pinctrl_uart1: uart1grp {
|
|
|
|
fsl,pins = <
|
|
|
|
MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
|
|
|
|
MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_uart2: uart2grp {
|
|
|
|
fsl,pins = <
|
|
|
|
MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
|
|
|
|
MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_uart5: uart5grp {
|
|
|
|
fsl,pins = <
|
|
|
|
MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
|
|
|
|
MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_usbotg: usbotggrp {
|
|
|
|
fsl,pins = <
|
|
|
|
MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
|
2014-09-09 00:07:30 -06:00
|
|
|
MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* OTG_PWR_EN */
|
2014-02-07 00:24:56 -07:00
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pinctrl_usdhc3: usdhc3grp {
|
|
|
|
fsl,pins = <
|
|
|
|
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
|
|
|
|
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
|
|
|
|
MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
|
|
|
|
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
|
|
|
|
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
|
|
|
|
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|