2013-08-13 07:36:36 -06:00
|
|
|
/*
|
|
|
|
* Copyright (C) 2013 Pavel Machek <pavel@ucw.cz>
|
2014-02-09 05:12:36 -07:00
|
|
|
* Copyright (C) 2013-2014 Aaro Koskinen <aaro.koskinen@iki.fi>
|
2013-08-13 07:36:36 -06:00
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
* it under the terms of the GNU General Public License version 2 (or later) as
|
|
|
|
* published by the Free Software Foundation.
|
|
|
|
*/
|
|
|
|
|
|
|
|
/dts-v1/;
|
|
|
|
|
2015-02-26 06:49:58 -07:00
|
|
|
#include "omap34xx.dtsi"
|
2014-05-06 07:14:28 -06:00
|
|
|
#include <dt-bindings/input/input.h>
|
2013-08-13 07:36:36 -06:00
|
|
|
|
2015-02-26 06:49:58 -07:00
|
|
|
/*
|
|
|
|
* Default secure signed bootloader (Nokia X-Loader) does not enable L3 firewall
|
|
|
|
* for omap AES HW crypto support. When linux kernel try to access memory of AES
|
|
|
|
* blocks then kernel receive "Unhandled fault: external abort on non-linefetch"
|
|
|
|
* and crash. Until somebody fix omap-aes.c and omap_hwmod_3xxx_data.c code (no
|
|
|
|
* crash anymore) omap AES support will be disabled for all Nokia N900 devices.
|
|
|
|
* There is "unofficial" version of bootloader which enables AES in L3 firewall
|
|
|
|
* but it is not widely used and to prevent kernel crash rather AES is disabled.
|
|
|
|
* There is also no runtime detection code if AES is disabled in L3 firewall...
|
|
|
|
*/
|
|
|
|
&aes {
|
|
|
|
status = "disabled";
|
|
|
|
};
|
|
|
|
|
2013-08-13 07:36:36 -06:00
|
|
|
/ {
|
|
|
|
model = "Nokia N900";
|
2014-02-09 05:12:36 -07:00
|
|
|
compatible = "nokia,omap3-n900", "ti,omap3430", "ti,omap3";
|
2013-08-13 07:36:36 -06:00
|
|
|
|
2015-02-08 08:48:56 -07:00
|
|
|
aliases {
|
|
|
|
i2c0;
|
|
|
|
i2c1 = &i2c1;
|
|
|
|
i2c2 = &i2c2;
|
|
|
|
i2c3 = &i2c3;
|
|
|
|
};
|
|
|
|
|
2013-08-13 07:36:36 -06:00
|
|
|
cpus {
|
|
|
|
cpu@0 {
|
|
|
|
cpu0-supply = <&vcc>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
2014-05-05 18:27:38 -06:00
|
|
|
leds {
|
|
|
|
compatible = "gpio-leds";
|
|
|
|
heartbeat {
|
|
|
|
label = "debug::sleep";
|
2016-10-11 02:12:43 -06:00
|
|
|
gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>; /* 162 */
|
2014-05-05 18:27:38 -06:00
|
|
|
linux,default-trigger = "default-on";
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&debug_leds>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
2016-08-31 04:35:27 -06:00
|
|
|
memory@80000000 {
|
2013-08-13 07:36:36 -06:00
|
|
|
device_type = "memory";
|
|
|
|
reg = <0x80000000 0x10000000>; /* 256 MB */
|
|
|
|
};
|
|
|
|
|
2013-10-22 16:49:34 -06:00
|
|
|
gpio_keys {
|
|
|
|
compatible = "gpio-keys";
|
|
|
|
|
|
|
|
camera_lens_cover {
|
|
|
|
label = "Camera Lens Cover";
|
|
|
|
gpios = <&gpio4 14 GPIO_ACTIVE_LOW>; /* 110 */
|
2016-02-21 04:06:48 -07:00
|
|
|
linux,input-type = <EV_SW>;
|
|
|
|
linux,code = <SW_CAMERA_LENS_COVER>;
|
2016-02-22 07:42:59 -07:00
|
|
|
linux,can-disable;
|
2013-10-22 16:49:34 -06:00
|
|
|
};
|
|
|
|
|
|
|
|
camera_focus {
|
|
|
|
label = "Camera Focus";
|
|
|
|
gpios = <&gpio3 4 GPIO_ACTIVE_LOW>; /* 68 */
|
2016-02-21 04:06:48 -07:00
|
|
|
linux,code = <KEY_CAMERA_FOCUS>;
|
2016-02-22 07:42:59 -07:00
|
|
|
linux,can-disable;
|
2013-10-22 16:49:34 -06:00
|
|
|
};
|
|
|
|
|
|
|
|
camera_capture {
|
|
|
|
label = "Camera Capture";
|
|
|
|
gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; /* 69 */
|
2016-02-21 04:06:48 -07:00
|
|
|
linux,code = <KEY_CAMERA>;
|
2016-02-22 07:42:59 -07:00
|
|
|
linux,can-disable;
|
2013-10-22 16:49:34 -06:00
|
|
|
};
|
|
|
|
|
|
|
|
lock_button {
|
|
|
|
label = "Lock Button";
|
|
|
|
gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; /* 113 */
|
2016-02-21 04:06:48 -07:00
|
|
|
linux,code = <KEY_SCREENLOCK>;
|
2016-02-22 07:42:59 -07:00
|
|
|
linux,can-disable;
|
2013-10-22 16:49:34 -06:00
|
|
|
};
|
|
|
|
|
|
|
|
keypad_slide {
|
|
|
|
label = "Keypad Slide";
|
|
|
|
gpios = <&gpio3 7 GPIO_ACTIVE_LOW>; /* 71 */
|
2016-02-21 04:06:48 -07:00
|
|
|
linux,input-type = <EV_SW>;
|
|
|
|
linux,code = <SW_KEYPAD_SLIDE>;
|
2016-02-22 07:42:59 -07:00
|
|
|
linux,can-disable;
|
2013-10-22 16:49:34 -06:00
|
|
|
};
|
|
|
|
|
|
|
|
proximity_sensor {
|
|
|
|
label = "Proximity Sensor";
|
|
|
|
gpios = <&gpio3 25 GPIO_ACTIVE_HIGH>; /* 89 */
|
2016-02-21 04:06:48 -07:00
|
|
|
linux,input-type = <EV_SW>;
|
|
|
|
linux,code = <SW_FRONT_PROXIMITY>;
|
2016-02-22 07:42:59 -07:00
|
|
|
linux,can-disable;
|
2013-10-22 16:49:34 -06:00
|
|
|
};
|
|
|
|
};
|
|
|
|
|
2016-02-21 04:28:23 -07:00
|
|
|
isp1707: isp1707 {
|
|
|
|
compatible = "nxp,isp1707";
|
2014-01-11 14:17:02 -07:00
|
|
|
nxp,enable-gpio = <&gpio3 3 GPIO_ACTIVE_HIGH>;
|
|
|
|
usb-phy = <&usb2_phy>;
|
|
|
|
};
|
2013-12-17 00:33:33 -07:00
|
|
|
|
|
|
|
tv: connector {
|
2014-09-02 01:17:20 -06:00
|
|
|
compatible = "composite-video-connector";
|
2013-12-17 00:33:33 -07:00
|
|
|
label = "tv";
|
|
|
|
|
|
|
|
port {
|
|
|
|
tv_connector_in: endpoint {
|
|
|
|
remote-endpoint = <&venc_out>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
2014-04-28 08:07:27 -06:00
|
|
|
|
|
|
|
sound: n900-audio {
|
|
|
|
compatible = "nokia,n900-audio";
|
|
|
|
|
|
|
|
nokia,cpu-dai = <&mcbsp2>;
|
|
|
|
nokia,audio-codec = <&tlv320aic3x>, <&tlv320aic3x_aux>;
|
|
|
|
nokia,headphone-amplifier = <&tpa6130a2>;
|
|
|
|
|
|
|
|
tvout-selection-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>; /* 40 */
|
|
|
|
jack-detection-gpios = <&gpio6 17 GPIO_ACTIVE_HIGH>; /* 177 */
|
|
|
|
eci-switch-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* 182 */
|
|
|
|
speaker-amplifier-gpios = <&twl_gpio 7 GPIO_ACTIVE_HIGH>;
|
|
|
|
};
|
2014-11-14 19:08:24 -07:00
|
|
|
|
|
|
|
battery: n900-battery {
|
|
|
|
compatible = "nokia,n900-battery";
|
|
|
|
io-channels = <&twl_madc 0>, <&twl_madc 4>, <&twl_madc 12>;
|
|
|
|
io-channel-names = "temp", "bsi", "vbat";
|
|
|
|
};
|
2016-05-16 13:34:14 -06:00
|
|
|
|
2016-06-27 13:20:45 -06:00
|
|
|
pwm9: dmtimer-pwm {
|
2016-05-16 13:34:14 -06:00
|
|
|
compatible = "ti,omap-dmtimer-pwm";
|
|
|
|
#pwm-cells = <3>;
|
|
|
|
ti,timers = <&timer9>;
|
|
|
|
ti,clock-source = <0x00>; /* timer_sys_ck */
|
|
|
|
};
|
|
|
|
|
|
|
|
ir: n900-ir {
|
|
|
|
compatible = "nokia,n900-ir";
|
|
|
|
pwms = <&pwm9 0 26316 0>; /* 38000 Hz */
|
|
|
|
};
|
2013-08-13 07:36:36 -06:00
|
|
|
};
|
|
|
|
|
2013-10-22 16:49:30 -06:00
|
|
|
&omap3_pmx_core {
|
|
|
|
pinctrl-names = "default";
|
|
|
|
|
2013-10-22 16:49:32 -06:00
|
|
|
uart2_pins: pinmux_uart2_pins {
|
|
|
|
pinctrl-single,pins = <
|
2015-11-12 21:54:05 -07:00
|
|
|
OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx */
|
|
|
|
OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx */
|
2013-10-22 16:49:32 -06:00
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
uart3_pins: pinmux_uart3_pins {
|
|
|
|
pinctrl-single,pins = <
|
2015-11-12 21:54:05 -07:00
|
|
|
OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx */
|
|
|
|
OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx */
|
2013-10-22 16:49:32 -06:00
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
2014-09-18 10:03:36 -06:00
|
|
|
ethernet_pins: pinmux_ethernet_pins {
|
|
|
|
pinctrl-single,pins = <
|
|
|
|
OMAP3_CORE1_IOPAD(0x20b4, PIN_INPUT_PULLDOWN | MUX_MODE4) /* gpmc_ncs3.gpio_54 */
|
|
|
|
OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE4) /* dss_data16.gpio_86 */
|
|
|
|
OMAP3_CORE1_IOPAD(0x219c, PIN_OUTPUT | MUX_MODE4) /* uart3_rts_sd.gpio_164 */
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
2014-10-29 18:16:47 -06:00
|
|
|
gpmc_pins: pinmux_gpmc_pins {
|
|
|
|
pinctrl-single,pins = <
|
|
|
|
|
|
|
|
/* address lines */
|
|
|
|
OMAP3_CORE1_IOPAD(0x207a, PIN_OUTPUT | MUX_MODE0) /* gpmc_a1.gpmc_a1 */
|
|
|
|
OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE0) /* gpmc_a2.gpmc_a2 */
|
|
|
|
OMAP3_CORE1_IOPAD(0x207e, PIN_OUTPUT | MUX_MODE0) /* gpmc_a3.gpmc_a3 */
|
|
|
|
|
|
|
|
/* data lines, gpmc_d0..d7 not muxable according to TRM */
|
|
|
|
OMAP3_CORE1_IOPAD(0x209e, PIN_INPUT | MUX_MODE0) /* gpmc_d8.gpmc_d8 */
|
|
|
|
OMAP3_CORE1_IOPAD(0x20a0, PIN_INPUT | MUX_MODE0) /* gpmc_d9.gpmc_d9 */
|
|
|
|
OMAP3_CORE1_IOPAD(0x20a2, PIN_INPUT | MUX_MODE0) /* gpmc_d10.gpmc_d10 */
|
|
|
|
OMAP3_CORE1_IOPAD(0x20a4, PIN_INPUT | MUX_MODE0) /* gpmc_d11.gpmc_d11 */
|
|
|
|
OMAP3_CORE1_IOPAD(0x20a6, PIN_INPUT | MUX_MODE0) /* gpmc_d12.gpmc_d12 */
|
|
|
|
OMAP3_CORE1_IOPAD(0x20a8, PIN_INPUT | MUX_MODE0) /* gpmc_d13.gpmc_d13 */
|
|
|
|
OMAP3_CORE1_IOPAD(0x20aa, PIN_INPUT | MUX_MODE0) /* gpmc_d14.gpmc_d14 */
|
|
|
|
OMAP3_CORE1_IOPAD(0x20ac, PIN_INPUT | MUX_MODE0) /* gpmc_d15.gpmc_d15 */
|
|
|
|
|
|
|
|
/*
|
|
|
|
* gpmc_ncs0, gpmc_nadv_ale, gpmc_noe, gpmc_nwe, gpmc_wait0 not muxable
|
|
|
|
* according to TRM. OneNAND seems to require PIN_INPUT on clock.
|
|
|
|
*/
|
|
|
|
OMAP3_CORE1_IOPAD(0x20b0, PIN_OUTPUT | MUX_MODE0) /* gpmc_ncs1.gpmc_ncs1 */
|
|
|
|
OMAP3_CORE1_IOPAD(0x20be, PIN_INPUT | MUX_MODE0) /* gpmc_clk.gpmc_clk */
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
2013-10-22 16:49:30 -06:00
|
|
|
i2c1_pins: pinmux_i2c1_pins {
|
|
|
|
pinctrl-single,pins = <
|
2015-11-12 21:54:05 -07:00
|
|
|
OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0) /* i2c1_scl */
|
|
|
|
OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0) /* i2c1_sda */
|
2013-10-22 16:49:30 -06:00
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
i2c2_pins: pinmux_i2c2_pins {
|
|
|
|
pinctrl-single,pins = <
|
2015-11-12 21:54:05 -07:00
|
|
|
OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT | MUX_MODE0) /* i2c2_scl */
|
|
|
|
OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT | MUX_MODE0) /* i2c2_sda */
|
2013-10-22 16:49:30 -06:00
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
|
|
|
i2c3_pins: pinmux_i2c3_pins {
|
|
|
|
pinctrl-single,pins = <
|
2015-11-12 21:54:05 -07:00
|
|
|
OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT | MUX_MODE0) /* i2c3_scl */
|
|
|
|
OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda */
|
2013-10-22 16:49:30 -06:00
|
|
|
>;
|
|
|
|
};
|
2013-10-22 16:49:33 -06:00
|
|
|
|
2014-05-05 18:27:38 -06:00
|
|
|
debug_leds: pinmux_debug_led_pins {
|
|
|
|
pinctrl-single,pins = <
|
|
|
|
OMAP3_CORE1_IOPAD(0x2198, PIN_OUTPUT | MUX_MODE4) /* mcbsp1_clkx.gpio_162 */
|
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
2014-03-13 15:59:55 -06:00
|
|
|
mcspi4_pins: pinmux_mcspi4_pins {
|
|
|
|
pinctrl-single,pins = <
|
2015-11-12 21:54:05 -07:00
|
|
|
OMAP3_CORE1_IOPAD(0x218c, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_clk */
|
|
|
|
OMAP3_CORE1_IOPAD(0x2192, PIN_INPUT_PULLDOWN | MUX_MODE1) /* mcspi4_somi */
|
|
|
|
OMAP3_CORE1_IOPAD(0x2190, PIN_OUTPUT | MUX_MODE1) /* mcspi4_simo */
|
|
|
|
OMAP3_CORE1_IOPAD(0x2196, PIN_OUTPUT | MUX_MODE1) /* mcspi4_cs0 */
|
2014-03-13 15:59:55 -06:00
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
2013-10-22 16:49:33 -06:00
|
|
|
mmc1_pins: pinmux_mmc1_pins {
|
|
|
|
pinctrl-single,pins = <
|
2015-11-12 21:54:05 -07:00
|
|
|
OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk */
|
|
|
|
OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd */
|
|
|
|
OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0 */
|
|
|
|
OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1 */
|
|
|
|
OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2 */
|
|
|
|
OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3 */
|
2013-10-22 16:49:33 -06:00
|
|
|
>;
|
|
|
|
};
|
2013-10-22 16:49:40 -06:00
|
|
|
|
2013-11-25 15:23:45 -07:00
|
|
|
mmc2_pins: pinmux_mmc2_pins {
|
|
|
|
pinctrl-single,pins = <
|
2015-11-12 21:54:05 -07:00
|
|
|
OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */
|
|
|
|
OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */
|
|
|
|
OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */
|
|
|
|
OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */
|
|
|
|
OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */
|
|
|
|
OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */
|
|
|
|
OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat4 */
|
|
|
|
OMAP3_CORE1_IOPAD(0x2166, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat5 */
|
|
|
|
OMAP3_CORE1_IOPAD(0x2168, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat6 */
|
|
|
|
OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat7 */
|
2013-11-25 15:23:45 -07:00
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
2013-12-17 00:33:33 -07:00
|
|
|
acx565akm_pins: pinmux_acx565akm_pins {
|
2013-10-22 16:49:40 -06:00
|
|
|
pinctrl-single,pins = <
|
2015-11-12 21:54:05 -07:00
|
|
|
OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE4) /* RX51_LCD_RESET_GPIO */
|
2013-10-22 16:49:40 -06:00
|
|
|
>;
|
|
|
|
};
|
2013-12-17 00:33:33 -07:00
|
|
|
|
|
|
|
dss_sdi_pins: pinmux_dss_sdi_pins {
|
|
|
|
pinctrl-single,pins = <
|
2015-11-12 21:54:05 -07:00
|
|
|
OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE1) /* dss_data10.sdi_dat1n */
|
|
|
|
OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE1) /* dss_data11.sdi_dat1p */
|
|
|
|
OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE1) /* dss_data12.sdi_dat2n */
|
|
|
|
OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE1) /* dss_data13.sdi_dat2p */
|
2013-12-17 00:33:33 -07:00
|
|
|
|
2015-11-12 21:54:05 -07:00
|
|
|
OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE1) /* dss_data22.sdi_clkp */
|
|
|
|
OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE1) /* dss_data23.sdi_clkn */
|
2013-12-17 00:33:33 -07:00
|
|
|
>;
|
|
|
|
};
|
2014-03-13 15:59:55 -06:00
|
|
|
|
|
|
|
wl1251_pins: pinmux_wl1251 {
|
|
|
|
pinctrl-single,pins = <
|
2015-11-12 21:54:05 -07:00
|
|
|
OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE4) /* gpio 87 => wl1251 enable */
|
|
|
|
OMAP3_CORE1_IOPAD(0x208a, PIN_INPUT | MUX_MODE4) /* gpio 42 => wl1251 irq */
|
2014-03-13 15:59:55 -06:00
|
|
|
>;
|
|
|
|
};
|
2014-05-10 10:37:49 -06:00
|
|
|
|
|
|
|
ssi_pins: pinmux_ssi {
|
|
|
|
pinctrl-single,pins = <
|
2015-11-12 21:54:05 -07:00
|
|
|
OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE1) /* ssi1_rdy_tx */
|
|
|
|
OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE1) /* ssi1_flag_tx */
|
2016-05-12 14:29:48 -06:00
|
|
|
OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE4) /* ssi1_wake_tx (cawake) */
|
2015-11-12 21:54:05 -07:00
|
|
|
OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE1) /* ssi1_dat_tx */
|
|
|
|
OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE1) /* ssi1_dat_rx */
|
|
|
|
OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE1) /* ssi1_flag_rx */
|
|
|
|
OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE1) /* ssi1_rdy_rx */
|
|
|
|
OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | MUX_MODE1) /* ssi1_wake */
|
2014-05-10 10:37:49 -06:00
|
|
|
>;
|
|
|
|
};
|
2014-05-10 10:37:50 -06:00
|
|
|
|
|
|
|
modem_pins: pinmux_modem {
|
|
|
|
pinctrl-single,pins = <
|
2015-11-12 21:54:05 -07:00
|
|
|
OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE4) /* gpio 70 => cmt_apeslpx */
|
2016-05-12 14:29:48 -06:00
|
|
|
OMAP3_CORE1_IOPAD(0x20e0, PIN_INPUT | MUX_MODE4) /* gpio 72 => ape_rst_rq */
|
2015-11-12 21:54:05 -07:00
|
|
|
OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE4) /* gpio 73 => cmt_rst_rq */
|
|
|
|
OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE4) /* gpio 74 => cmt_en */
|
|
|
|
OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE4) /* gpio 75 => cmt_rst */
|
|
|
|
OMAP3_CORE1_IOPAD(0x218e, PIN_OUTPUT | MUX_MODE4) /* gpio 157 => cmt_bsi */
|
2014-05-10 10:37:50 -06:00
|
|
|
>;
|
|
|
|
};
|
2013-10-22 16:49:30 -06:00
|
|
|
};
|
|
|
|
|
2013-08-13 07:36:36 -06:00
|
|
|
&i2c1 {
|
2013-10-22 16:49:30 -06:00
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&i2c1_pins>;
|
|
|
|
|
2013-08-13 07:36:36 -06:00
|
|
|
clock-frequency = <2200000>;
|
|
|
|
|
|
|
|
twl: twl@48 {
|
|
|
|
reg = <0x48>;
|
|
|
|
interrupts = <7>; /* SYS_NIRQ cascaded to intc */
|
|
|
|
interrupt-parent = <&intc>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
#include "twl4030.dtsi"
|
2013-10-22 16:49:30 -06:00
|
|
|
#include "twl4030_omap3.dtsi"
|
2013-08-13 07:36:36 -06:00
|
|
|
|
2013-10-22 16:49:38 -06:00
|
|
|
&vaux1 {
|
|
|
|
regulator-name = "V28";
|
|
|
|
regulator-min-microvolt = <2800000>;
|
|
|
|
regulator-max-microvolt = <2800000>;
|
2016-04-17 08:29:23 -06:00
|
|
|
regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
|
2014-12-07 09:11:47 -07:00
|
|
|
regulator-always-on; /* due to battery cover sensor */
|
2013-10-22 16:49:38 -06:00
|
|
|
};
|
|
|
|
|
|
|
|
&vaux2 {
|
|
|
|
regulator-name = "VCSI";
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
regulator-max-microvolt = <1800000>;
|
2016-04-17 08:29:23 -06:00
|
|
|
regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
|
2013-10-22 16:49:38 -06:00
|
|
|
};
|
|
|
|
|
|
|
|
&vaux3 {
|
|
|
|
regulator-name = "VMMC2_30";
|
|
|
|
regulator-min-microvolt = <2800000>;
|
|
|
|
regulator-max-microvolt = <3000000>;
|
2016-04-17 08:29:23 -06:00
|
|
|
regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
|
2013-10-22 16:49:38 -06:00
|
|
|
};
|
|
|
|
|
|
|
|
&vaux4 {
|
|
|
|
regulator-name = "VCAM_ANA_28";
|
|
|
|
regulator-min-microvolt = <2800000>;
|
|
|
|
regulator-max-microvolt = <2800000>;
|
2016-04-17 08:29:23 -06:00
|
|
|
regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
|
2013-10-22 16:49:38 -06:00
|
|
|
};
|
|
|
|
|
|
|
|
&vmmc1 {
|
|
|
|
regulator-name = "VMMC1";
|
|
|
|
regulator-min-microvolt = <1850000>;
|
|
|
|
regulator-max-microvolt = <3150000>;
|
2016-04-17 08:29:23 -06:00
|
|
|
regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
|
2013-10-22 16:49:38 -06:00
|
|
|
};
|
|
|
|
|
|
|
|
&vmmc2 {
|
|
|
|
regulator-name = "V28_A";
|
|
|
|
regulator-min-microvolt = <2800000>;
|
|
|
|
regulator-max-microvolt = <3000000>;
|
2016-04-17 08:29:23 -06:00
|
|
|
regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
|
2013-10-22 16:49:38 -06:00
|
|
|
regulator-always-on; /* due VIO leak to AIC34 VDDs */
|
|
|
|
};
|
|
|
|
|
|
|
|
&vpll1 {
|
|
|
|
regulator-name = "VPLL";
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
regulator-max-microvolt = <1800000>;
|
2016-04-17 08:29:23 -06:00
|
|
|
regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
|
2013-10-22 16:49:38 -06:00
|
|
|
regulator-always-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
&vpll2 {
|
|
|
|
regulator-name = "VSDI_CSI";
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
regulator-max-microvolt = <1800000>;
|
2016-04-17 08:29:23 -06:00
|
|
|
regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
|
2013-10-22 16:49:38 -06:00
|
|
|
regulator-always-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
&vsim {
|
|
|
|
regulator-name = "VMMC2_IO_18";
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
regulator-max-microvolt = <1800000>;
|
2016-04-17 08:29:23 -06:00
|
|
|
regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
|
2013-10-22 16:49:38 -06:00
|
|
|
};
|
|
|
|
|
|
|
|
&vio {
|
|
|
|
regulator-name = "VIO";
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
};
|
|
|
|
|
|
|
|
&vintana1 {
|
|
|
|
regulator-name = "VINTANA1";
|
|
|
|
/* fixed to 1500000 */
|
|
|
|
regulator-always-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
&vintana2 {
|
|
|
|
regulator-name = "VINTANA2";
|
|
|
|
regulator-min-microvolt = <2750000>;
|
|
|
|
regulator-max-microvolt = <2750000>;
|
|
|
|
regulator-always-on;
|
|
|
|
};
|
|
|
|
|
|
|
|
&vintdig {
|
|
|
|
regulator-name = "VINTDIG";
|
|
|
|
/* fixed to 1500000 */
|
|
|
|
regulator-always-on;
|
|
|
|
};
|
|
|
|
|
2013-10-22 16:49:35 -06:00
|
|
|
&twl {
|
|
|
|
twl_audio: audio {
|
|
|
|
compatible = "ti,twl4030-audio";
|
|
|
|
ti,enable-vibra = <1>;
|
|
|
|
};
|
2014-06-16 02:10:22 -06:00
|
|
|
|
|
|
|
twl_power: power {
|
2014-08-19 09:24:05 -06:00
|
|
|
compatible = "ti,twl4030-power-n900", "ti,twl4030-power-idle-osc-off";
|
2014-06-16 02:10:22 -06:00
|
|
|
ti,use_poweroff;
|
|
|
|
};
|
2013-10-22 16:49:35 -06:00
|
|
|
};
|
|
|
|
|
2014-01-11 14:16:59 -07:00
|
|
|
&twl_keypad {
|
2014-05-06 07:14:28 -06:00
|
|
|
linux,keymap = < MATRIX_KEY(0x00, 0x00, KEY_Q)
|
|
|
|
MATRIX_KEY(0x00, 0x01, KEY_O)
|
|
|
|
MATRIX_KEY(0x00, 0x02, KEY_P)
|
|
|
|
MATRIX_KEY(0x00, 0x03, KEY_COMMA)
|
|
|
|
MATRIX_KEY(0x00, 0x04, KEY_BACKSPACE)
|
|
|
|
MATRIX_KEY(0x00, 0x06, KEY_A)
|
|
|
|
MATRIX_KEY(0x00, 0x07, KEY_S)
|
|
|
|
|
|
|
|
MATRIX_KEY(0x01, 0x00, KEY_W)
|
|
|
|
MATRIX_KEY(0x01, 0x01, KEY_D)
|
|
|
|
MATRIX_KEY(0x01, 0x02, KEY_F)
|
|
|
|
MATRIX_KEY(0x01, 0x03, KEY_G)
|
|
|
|
MATRIX_KEY(0x01, 0x04, KEY_H)
|
|
|
|
MATRIX_KEY(0x01, 0x05, KEY_J)
|
|
|
|
MATRIX_KEY(0x01, 0x06, KEY_K)
|
|
|
|
MATRIX_KEY(0x01, 0x07, KEY_L)
|
|
|
|
|
|
|
|
MATRIX_KEY(0x02, 0x00, KEY_E)
|
|
|
|
MATRIX_KEY(0x02, 0x01, KEY_DOT)
|
|
|
|
MATRIX_KEY(0x02, 0x02, KEY_UP)
|
|
|
|
MATRIX_KEY(0x02, 0x03, KEY_ENTER)
|
|
|
|
MATRIX_KEY(0x02, 0x05, KEY_Z)
|
|
|
|
MATRIX_KEY(0x02, 0x06, KEY_X)
|
|
|
|
MATRIX_KEY(0x02, 0x07, KEY_C)
|
|
|
|
MATRIX_KEY(0x02, 0x08, KEY_F9)
|
|
|
|
|
|
|
|
MATRIX_KEY(0x03, 0x00, KEY_R)
|
|
|
|
MATRIX_KEY(0x03, 0x01, KEY_V)
|
|
|
|
MATRIX_KEY(0x03, 0x02, KEY_B)
|
|
|
|
MATRIX_KEY(0x03, 0x03, KEY_N)
|
|
|
|
MATRIX_KEY(0x03, 0x04, KEY_M)
|
|
|
|
MATRIX_KEY(0x03, 0x05, KEY_SPACE)
|
|
|
|
MATRIX_KEY(0x03, 0x06, KEY_SPACE)
|
|
|
|
MATRIX_KEY(0x03, 0x07, KEY_LEFT)
|
|
|
|
|
|
|
|
MATRIX_KEY(0x04, 0x00, KEY_T)
|
|
|
|
MATRIX_KEY(0x04, 0x01, KEY_DOWN)
|
|
|
|
MATRIX_KEY(0x04, 0x02, KEY_RIGHT)
|
|
|
|
MATRIX_KEY(0x04, 0x04, KEY_LEFTCTRL)
|
|
|
|
MATRIX_KEY(0x04, 0x05, KEY_RIGHTALT)
|
|
|
|
MATRIX_KEY(0x04, 0x06, KEY_LEFTSHIFT)
|
|
|
|
MATRIX_KEY(0x04, 0x08, KEY_F10)
|
|
|
|
|
|
|
|
MATRIX_KEY(0x05, 0x00, KEY_Y)
|
|
|
|
MATRIX_KEY(0x05, 0x08, KEY_F11)
|
|
|
|
|
|
|
|
MATRIX_KEY(0x06, 0x00, KEY_U)
|
|
|
|
|
|
|
|
MATRIX_KEY(0x07, 0x00, KEY_I)
|
|
|
|
MATRIX_KEY(0x07, 0x01, KEY_F7)
|
|
|
|
MATRIX_KEY(0x07, 0x02, KEY_F8)
|
2014-01-11 14:16:59 -07:00
|
|
|
>;
|
|
|
|
};
|
|
|
|
|
2013-08-13 07:36:36 -06:00
|
|
|
&twl_gpio {
|
|
|
|
ti,pullups = <0x0>;
|
|
|
|
ti,pulldowns = <0x03ff3f>; /* BIT(0..5) | BIT(8..17) */
|
|
|
|
};
|
|
|
|
|
|
|
|
&i2c2 {
|
2013-10-22 16:49:30 -06:00
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&i2c2_pins>;
|
|
|
|
|
2013-10-22 16:49:31 -06:00
|
|
|
clock-frequency = <100000>;
|
2013-10-22 16:49:36 -06:00
|
|
|
|
2013-10-22 16:49:41 -06:00
|
|
|
tlv320aic3x: tlv320aic3x@18 {
|
|
|
|
compatible = "ti,tlv320aic3x";
|
|
|
|
reg = <0x18>;
|
|
|
|
gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */
|
|
|
|
ai3x-gpio-func = <
|
|
|
|
0 /* AIC3X_GPIO1_FUNC_DISABLED */
|
|
|
|
5 /* AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT */
|
|
|
|
>;
|
|
|
|
|
|
|
|
AVDD-supply = <&vmmc2>;
|
|
|
|
DRVDD-supply = <&vmmc2>;
|
|
|
|
IOVDD-supply = <&vio>;
|
|
|
|
DVDD-supply = <&vio>;
|
2015-03-01 12:07:08 -07:00
|
|
|
|
|
|
|
ai3x-micbias-vg = <1>;
|
2013-10-22 16:49:41 -06:00
|
|
|
};
|
|
|
|
|
|
|
|
tlv320aic3x_aux: tlv320aic3x@19 {
|
|
|
|
compatible = "ti,tlv320aic3x";
|
|
|
|
reg = <0x19>;
|
|
|
|
gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */
|
|
|
|
|
|
|
|
AVDD-supply = <&vmmc2>;
|
|
|
|
DRVDD-supply = <&vmmc2>;
|
|
|
|
IOVDD-supply = <&vio>;
|
|
|
|
DVDD-supply = <&vio>;
|
2015-03-01 12:07:08 -07:00
|
|
|
|
|
|
|
ai3x-micbias-vg = <2>;
|
2013-10-22 16:49:41 -06:00
|
|
|
};
|
|
|
|
|
2014-01-11 14:17:00 -07:00
|
|
|
tsl2563: tsl2563@29 {
|
|
|
|
compatible = "amstaos,tsl2563";
|
|
|
|
reg = <0x29>;
|
|
|
|
|
|
|
|
amstaos,cover-comp-gain = <16>;
|
|
|
|
};
|
|
|
|
|
2015-12-25 16:40:12 -07:00
|
|
|
adp1653: led-controller@30 {
|
|
|
|
compatible = "adi,adp1653";
|
|
|
|
reg = <0x30>;
|
|
|
|
enable-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; /* 88 */
|
|
|
|
|
|
|
|
flash {
|
|
|
|
flash-timeout-us = <500000>;
|
|
|
|
flash-max-microamp = <320000>;
|
|
|
|
led-max-microamp = <50000>;
|
|
|
|
};
|
|
|
|
indicator {
|
|
|
|
led-max-microamp = <17500>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
2013-10-22 16:49:42 -06:00
|
|
|
lp5523: lp5523@32 {
|
|
|
|
compatible = "national,lp5523";
|
|
|
|
reg = <0x32>;
|
|
|
|
clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
|
|
|
|
enable-gpio = <&gpio2 9 GPIO_ACTIVE_HIGH>; /* 41 */
|
|
|
|
|
|
|
|
chan0 {
|
|
|
|
chan-name = "lp5523:kb1";
|
|
|
|
led-cur = /bits/ 8 <50>;
|
|
|
|
max-cur = /bits/ 8 <100>;
|
|
|
|
};
|
|
|
|
|
|
|
|
chan1 {
|
|
|
|
chan-name = "lp5523:kb2";
|
|
|
|
led-cur = /bits/ 8 <50>;
|
|
|
|
max-cur = /bits/ 8 <100>;
|
|
|
|
};
|
|
|
|
|
|
|
|
chan2 {
|
|
|
|
chan-name = "lp5523:kb3";
|
|
|
|
led-cur = /bits/ 8 <50>;
|
|
|
|
max-cur = /bits/ 8 <100>;
|
|
|
|
};
|
|
|
|
|
|
|
|
chan3 {
|
|
|
|
chan-name = "lp5523:kb4";
|
|
|
|
led-cur = /bits/ 8 <50>;
|
|
|
|
max-cur = /bits/ 8 <100>;
|
|
|
|
};
|
|
|
|
|
|
|
|
chan4 {
|
|
|
|
chan-name = "lp5523:b";
|
|
|
|
led-cur = /bits/ 8 <50>;
|
|
|
|
max-cur = /bits/ 8 <100>;
|
|
|
|
};
|
|
|
|
|
|
|
|
chan5 {
|
|
|
|
chan-name = "lp5523:g";
|
|
|
|
led-cur = /bits/ 8 <50>;
|
|
|
|
max-cur = /bits/ 8 <100>;
|
|
|
|
};
|
|
|
|
|
|
|
|
chan6 {
|
|
|
|
chan-name = "lp5523:r";
|
|
|
|
led-cur = /bits/ 8 <50>;
|
|
|
|
max-cur = /bits/ 8 <100>;
|
|
|
|
};
|
|
|
|
|
|
|
|
chan7 {
|
|
|
|
chan-name = "lp5523:kb5";
|
|
|
|
led-cur = /bits/ 8 <50>;
|
|
|
|
max-cur = /bits/ 8 <100>;
|
|
|
|
};
|
|
|
|
|
|
|
|
chan8 {
|
|
|
|
chan-name = "lp5523:kb6";
|
|
|
|
led-cur = /bits/ 8 <50>;
|
|
|
|
max-cur = /bits/ 8 <100>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
2013-10-22 16:49:36 -06:00
|
|
|
bq27200: bq27200@55 {
|
|
|
|
compatible = "ti,bq27200";
|
|
|
|
reg = <0x55>;
|
|
|
|
};
|
2014-01-11 14:17:01 -07:00
|
|
|
|
2016-10-11 02:12:43 -06:00
|
|
|
/* Stereo headphone amplifier */
|
2014-01-11 14:17:01 -07:00
|
|
|
tpa6130a2: tpa6130a2@60 {
|
|
|
|
compatible = "ti,tpa6130a2";
|
|
|
|
reg = <0x60>;
|
|
|
|
|
|
|
|
Vdd-supply = <&vmmc2>;
|
|
|
|
|
|
|
|
power-gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>; /* 98 */
|
|
|
|
};
|
2014-01-11 14:17:03 -07:00
|
|
|
|
2014-11-14 18:47:30 -07:00
|
|
|
si4713: si4713@63 {
|
|
|
|
compatible = "silabs,si4713";
|
|
|
|
reg = <0x63>;
|
|
|
|
|
|
|
|
interrupts-extended = <&gpio2 21 IRQ_TYPE_EDGE_FALLING>; /* 53 */
|
|
|
|
reset-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* 163 */
|
|
|
|
vio-supply = <&vio>;
|
|
|
|
vdd-supply = <&vaux1>;
|
|
|
|
};
|
|
|
|
|
2014-01-11 14:17:03 -07:00
|
|
|
bq24150a: bq24150a@6b {
|
|
|
|
compatible = "ti,bq24150a";
|
|
|
|
reg = <0x6b>;
|
|
|
|
|
|
|
|
ti,current-limit = <100>;
|
|
|
|
ti,weak-battery-voltage = <3400>;
|
|
|
|
ti,battery-regulation-voltage = <4200>;
|
|
|
|
ti,charge-current = <650>;
|
|
|
|
ti,termination-current = <100>;
|
|
|
|
ti,resistor-sense = <68>;
|
|
|
|
|
2016-02-21 04:28:23 -07:00
|
|
|
ti,usb-charger-detection = <&isp1707>;
|
2014-01-11 14:17:03 -07:00
|
|
|
};
|
2013-08-13 07:36:36 -06:00
|
|
|
};
|
|
|
|
|
|
|
|
&i2c3 {
|
2013-10-22 16:49:30 -06:00
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&i2c3_pins>;
|
|
|
|
|
2013-10-22 16:49:31 -06:00
|
|
|
clock-frequency = <400000>;
|
2015-03-27 08:39:46 -06:00
|
|
|
|
|
|
|
lis302dl: lis3lv02d@1d {
|
|
|
|
compatible = "st,lis3lv02d";
|
|
|
|
reg = <0x1d>;
|
|
|
|
|
|
|
|
Vdd-supply = <&vaux1>;
|
|
|
|
Vdd_IO-supply = <&vio>;
|
|
|
|
|
|
|
|
interrupt-parent = <&gpio6>;
|
|
|
|
interrupts = <21 20>; /* 181 and 180 */
|
|
|
|
|
|
|
|
/* click flags */
|
|
|
|
st,click-single-x;
|
|
|
|
st,click-single-y;
|
|
|
|
st,click-single-z;
|
|
|
|
|
|
|
|
/* Limits are 0.5g * value */
|
|
|
|
st,click-threshold-x = <8>;
|
|
|
|
st,click-threshold-y = <8>;
|
|
|
|
st,click-threshold-z = <10>;
|
|
|
|
|
|
|
|
/* Click must be longer than time limit */
|
|
|
|
st,click-time-limit = <9>;
|
|
|
|
|
|
|
|
/* Kind of debounce filter */
|
|
|
|
st,click-latency = <50>;
|
|
|
|
|
|
|
|
/* Interrupt line 2 for click detection */
|
|
|
|
st,irq2-click;
|
|
|
|
|
|
|
|
st,wakeup-x-hi;
|
|
|
|
st,wakeup-y-hi;
|
|
|
|
st,wakeup-threshold = <(800/18)>; /* millig-value / 18 to get HW values */
|
|
|
|
|
|
|
|
st,wakeup2-z-hi;
|
|
|
|
st,wakeup2-threshold = <(900/18)>; /* millig-value / 18 to get HW values */
|
|
|
|
|
|
|
|
st,hipass1-disable;
|
|
|
|
st,hipass2-disable;
|
|
|
|
|
|
|
|
st,axis-x = <1>; /* LIS3_DEV_X */
|
|
|
|
st,axis-y = <(-2)>; /* LIS3_INV_DEV_Y */
|
|
|
|
st,axis-z = <(-3)>; /* LIS3_INV_DEV_Z */
|
|
|
|
|
|
|
|
st,min-limit-x = <(-32)>;
|
|
|
|
st,min-limit-y = <3>;
|
|
|
|
st,min-limit-z = <3>;
|
|
|
|
|
|
|
|
st,max-limit-x = <(-3)>;
|
|
|
|
st,max-limit-y = <32>;
|
|
|
|
st,max-limit-z = <32>;
|
|
|
|
};
|
2013-08-13 07:36:36 -06:00
|
|
|
};
|
|
|
|
|
|
|
|
&mmc1 {
|
2013-10-22 16:49:33 -06:00
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&mmc1_pins>;
|
|
|
|
vmmc-supply = <&vmmc1>;
|
|
|
|
bus-width = <4>;
|
|
|
|
cd-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* 160 */
|
2013-08-13 07:36:36 -06:00
|
|
|
};
|
|
|
|
|
2013-11-25 15:23:45 -07:00
|
|
|
/* most boards use vaux3, only some old versions use vmmc2 instead */
|
2013-08-13 07:36:36 -06:00
|
|
|
&mmc2 {
|
2013-11-25 15:23:45 -07:00
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&mmc2_pins>;
|
|
|
|
vmmc-supply = <&vaux3>;
|
|
|
|
vmmc_aux-supply = <&vsim>;
|
|
|
|
bus-width = <8>;
|
|
|
|
non-removable;
|
2016-12-14 14:29:44 -07:00
|
|
|
no-sdio;
|
|
|
|
no-sd;
|
2013-08-13 07:36:36 -06:00
|
|
|
};
|
|
|
|
|
|
|
|
&mmc3 {
|
|
|
|
status = "disabled";
|
|
|
|
};
|
|
|
|
|
2013-10-22 16:49:39 -06:00
|
|
|
&gpmc {
|
2014-09-18 10:03:36 -06:00
|
|
|
ranges = <0 0 0x01000000 0x01000000>, /* 16 MB for OneNAND */
|
|
|
|
<1 0 0x02000000 0x01000000>; /* 16 MB for smc91c96 */
|
2014-10-29 18:16:47 -06:00
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&gpmc_pins>;
|
2013-10-22 16:49:39 -06:00
|
|
|
|
2014-10-29 18:16:47 -06:00
|
|
|
/* sys_ndmareq1 could be used by the driver, not as gpio65 though */
|
2013-10-22 16:49:39 -06:00
|
|
|
onenand@0,0 {
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <1>;
|
2014-10-29 18:16:47 -06:00
|
|
|
reg = <0 0 0x20000>; /* CS0, offset 0, IO size 128K */
|
2013-10-22 16:49:39 -06:00
|
|
|
|
|
|
|
gpmc,sync-read;
|
|
|
|
gpmc,sync-write;
|
|
|
|
gpmc,burst-length = <16>;
|
|
|
|
gpmc,burst-read;
|
|
|
|
gpmc,burst-wrap;
|
|
|
|
gpmc,burst-write;
|
|
|
|
gpmc,device-width = <2>; /* GPMC_DEVWIDTH_16BIT */
|
|
|
|
gpmc,mux-add-data = <2>; /* GPMC_MUX_AD */
|
|
|
|
gpmc,cs-on-ns = <0>;
|
|
|
|
gpmc,cs-rd-off-ns = <87>;
|
|
|
|
gpmc,cs-wr-off-ns = <87>;
|
|
|
|
gpmc,adv-on-ns = <0>;
|
|
|
|
gpmc,adv-rd-off-ns = <10>;
|
|
|
|
gpmc,adv-wr-off-ns = <10>;
|
|
|
|
gpmc,oe-on-ns = <15>;
|
|
|
|
gpmc,oe-off-ns = <87>;
|
|
|
|
gpmc,we-on-ns = <0>;
|
|
|
|
gpmc,we-off-ns = <87>;
|
|
|
|
gpmc,rd-cycle-ns = <112>;
|
|
|
|
gpmc,wr-cycle-ns = <112>;
|
|
|
|
gpmc,access-ns = <81>;
|
|
|
|
gpmc,page-burst-access-ns = <15>;
|
|
|
|
gpmc,bus-turnaround-ns = <0>;
|
|
|
|
gpmc,cycle2cycle-delay-ns = <0>;
|
|
|
|
gpmc,wait-monitoring-ns = <0>;
|
|
|
|
gpmc,clk-activation-ns = <5>;
|
|
|
|
gpmc,wr-data-mux-bus-ns = <30>;
|
|
|
|
gpmc,wr-access-ns = <81>;
|
|
|
|
gpmc,sync-clk-ps = <15000>;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* MTD partition table corresponding to Nokia's
|
|
|
|
* Maemo 5 (Fremantle) release.
|
|
|
|
*/
|
|
|
|
partition@0 {
|
|
|
|
label = "bootloader";
|
|
|
|
reg = <0x00000000 0x00020000>;
|
|
|
|
read-only;
|
|
|
|
};
|
|
|
|
partition@1 {
|
|
|
|
label = "config";
|
|
|
|
reg = <0x00020000 0x00060000>;
|
|
|
|
};
|
|
|
|
partition@2 {
|
|
|
|
label = "log";
|
|
|
|
reg = <0x00080000 0x00040000>;
|
|
|
|
};
|
|
|
|
partition@3 {
|
|
|
|
label = "kernel";
|
|
|
|
reg = <0x000c0000 0x00200000>;
|
|
|
|
};
|
|
|
|
partition@4 {
|
|
|
|
label = "initfs";
|
|
|
|
reg = <0x002c0000 0x00200000>;
|
|
|
|
};
|
|
|
|
partition@5 {
|
|
|
|
label = "rootfs";
|
|
|
|
reg = <0x004c0000 0x0fb40000>;
|
|
|
|
};
|
|
|
|
};
|
2014-09-18 10:03:36 -06:00
|
|
|
|
2015-01-06 09:49:57 -07:00
|
|
|
/* Ethernet is on some early development boards and qemu */
|
2014-09-18 10:03:36 -06:00
|
|
|
ethernet@gpmc {
|
|
|
|
compatible = "smsc,lan91c94";
|
|
|
|
interrupt-parent = <&gpio2>;
|
|
|
|
interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; /* gpio54 */
|
2015-02-19 09:49:50 -07:00
|
|
|
reg = <1 0 0xf>; /* 16 byte IO range */
|
2014-09-18 10:03:36 -06:00
|
|
|
bank-width = <2>;
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <ðernet_pins>;
|
2014-10-30 10:59:27 -06:00
|
|
|
power-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; /* gpio86 */
|
|
|
|
reset-gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* gpio164 */
|
2014-09-18 10:03:36 -06:00
|
|
|
gpmc,device-width = <2>;
|
|
|
|
gpmc,sync-clk-ps = <0>;
|
|
|
|
gpmc,cs-on-ns = <0>;
|
|
|
|
gpmc,cs-rd-off-ns = <48>;
|
|
|
|
gpmc,cs-wr-off-ns = <24>;
|
|
|
|
gpmc,adv-on-ns = <0>;
|
|
|
|
gpmc,adv-rd-off-ns = <0>;
|
|
|
|
gpmc,adv-wr-off-ns = <0>;
|
|
|
|
gpmc,we-on-ns = <12>;
|
|
|
|
gpmc,we-off-ns = <18>;
|
|
|
|
gpmc,oe-on-ns = <12>;
|
|
|
|
gpmc,oe-off-ns = <48>;
|
|
|
|
gpmc,page-burst-access-ns = <0>;
|
|
|
|
gpmc,access-ns = <42>;
|
|
|
|
gpmc,rd-cycle-ns = <180>;
|
|
|
|
gpmc,wr-cycle-ns = <180>;
|
|
|
|
gpmc,bus-turnaround-ns = <0>;
|
|
|
|
gpmc,cycle2cycle-delay-ns = <0>;
|
|
|
|
gpmc,wait-monitoring-ns = <0>;
|
|
|
|
gpmc,clk-activation-ns = <0>;
|
|
|
|
gpmc,wr-access-ns = <0>;
|
|
|
|
gpmc,wr-data-mux-bus-ns = <12>;
|
|
|
|
};
|
2013-10-22 16:49:39 -06:00
|
|
|
};
|
|
|
|
|
2013-08-13 07:36:36 -06:00
|
|
|
&mcspi1 {
|
|
|
|
/*
|
|
|
|
* For some reason, touchscreen is necessary for screen to work at
|
|
|
|
* all on real hw. It works well without it on emulator.
|
|
|
|
*
|
|
|
|
* Also... order in the device tree actually matters here.
|
|
|
|
*/
|
|
|
|
tsc2005@0 {
|
2014-05-29 01:03:59 -06:00
|
|
|
compatible = "ti,tsc2005";
|
2013-08-13 07:36:36 -06:00
|
|
|
spi-max-frequency = <6000000>;
|
|
|
|
reg = <0>;
|
2014-05-29 01:03:59 -06:00
|
|
|
|
|
|
|
vio-supply = <&vio>;
|
|
|
|
|
|
|
|
reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */
|
|
|
|
interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>; /* 100 */
|
|
|
|
|
|
|
|
touchscreen-fuzz-x = <4>;
|
|
|
|
touchscreen-fuzz-y = <7>;
|
|
|
|
touchscreen-fuzz-pressure = <2>;
|
2015-05-29 13:32:11 -06:00
|
|
|
touchscreen-size-x = <4096>;
|
|
|
|
touchscreen-size-y = <4096>;
|
2014-05-29 01:03:59 -06:00
|
|
|
touchscreen-max-pressure = <2048>;
|
|
|
|
|
|
|
|
ti,x-plate-ohms = <280>;
|
|
|
|
ti,esd-recovery-timeout-ms = <8000>;
|
2013-08-13 07:36:36 -06:00
|
|
|
};
|
2013-12-17 00:33:33 -07:00
|
|
|
|
|
|
|
acx565akm@2 {
|
|
|
|
compatible = "sony,acx565akm";
|
2013-08-13 07:36:36 -06:00
|
|
|
spi-max-frequency = <6000000>;
|
|
|
|
reg = <2>;
|
2013-10-22 16:49:40 -06:00
|
|
|
|
|
|
|
pinctrl-names = "default";
|
2013-12-17 00:33:33 -07:00
|
|
|
pinctrl-0 = <&acx565akm_pins>;
|
|
|
|
|
|
|
|
label = "lcd";
|
|
|
|
reset-gpios = <&gpio3 26 GPIO_ACTIVE_HIGH>; /* 90 */
|
|
|
|
|
|
|
|
port {
|
|
|
|
lcd_in: endpoint {
|
|
|
|
remote-endpoint = <&sdi_out>;
|
|
|
|
};
|
|
|
|
};
|
2013-08-13 07:36:36 -06:00
|
|
|
};
|
|
|
|
};
|
|
|
|
|
2014-03-13 15:59:55 -06:00
|
|
|
&mcspi4 {
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&mcspi4_pins>;
|
|
|
|
|
|
|
|
wl1251@0 {
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&wl1251_pins>;
|
|
|
|
|
|
|
|
vio-supply = <&vio>;
|
|
|
|
|
|
|
|
compatible = "ti,wl1251";
|
|
|
|
reg = <0>;
|
|
|
|
spi-max-frequency = <48000000>;
|
|
|
|
|
|
|
|
spi-cpol;
|
|
|
|
spi-cpha;
|
|
|
|
|
|
|
|
ti,power-gpio = <&gpio3 23 GPIO_ACTIVE_HIGH>; /* 87 */
|
|
|
|
|
|
|
|
interrupt-parent = <&gpio2>;
|
|
|
|
interrupts = <10 IRQ_TYPE_NONE>; /* gpio line 42 */
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
2013-08-13 07:36:36 -06:00
|
|
|
&usb_otg_hs {
|
|
|
|
interface-type = <0>;
|
|
|
|
usb-phy = <&usb2_phy>;
|
2013-10-07 07:28:13 -06:00
|
|
|
phys = <&usb2_phy>;
|
|
|
|
phy-names = "usb2-phy";
|
2013-08-13 07:36:36 -06:00
|
|
|
mode = <2>;
|
|
|
|
power = <50>;
|
|
|
|
};
|
2013-10-22 16:49:32 -06:00
|
|
|
|
|
|
|
&uart1 {
|
|
|
|
status = "disabled";
|
|
|
|
};
|
|
|
|
|
|
|
|
&uart2 {
|
2014-05-05 18:27:39 -06:00
|
|
|
interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
|
2013-10-22 16:49:32 -06:00
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&uart2_pins>;
|
|
|
|
};
|
|
|
|
|
|
|
|
&uart3 {
|
2014-05-05 18:27:39 -06:00
|
|
|
interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
|
2013-10-22 16:49:32 -06:00
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&uart3_pins>;
|
|
|
|
};
|
2013-12-17 00:33:33 -07:00
|
|
|
|
|
|
|
&dss {
|
|
|
|
status = "ok";
|
|
|
|
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&dss_sdi_pins>;
|
|
|
|
|
|
|
|
vdds_sdi-supply = <&vaux1>;
|
|
|
|
|
|
|
|
ports {
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <0>;
|
|
|
|
|
|
|
|
port@1 {
|
|
|
|
reg = <1>;
|
|
|
|
|
|
|
|
sdi_out: endpoint {
|
|
|
|
remote-endpoint = <&lcd_in>;
|
|
|
|
datapairs = <2>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
&venc {
|
|
|
|
status = "ok";
|
|
|
|
|
|
|
|
vdda-supply = <&vdac>;
|
|
|
|
|
|
|
|
port {
|
|
|
|
venc_out: endpoint {
|
|
|
|
remote-endpoint = <&tv_connector_in>;
|
|
|
|
ti,channels = <1>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
2014-04-28 08:07:27 -06:00
|
|
|
|
|
|
|
&mcbsp2 {
|
|
|
|
status = "ok";
|
|
|
|
};
|
2014-05-10 10:37:49 -06:00
|
|
|
|
|
|
|
&ssi_port1 {
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&ssi_pins>;
|
|
|
|
|
|
|
|
ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */
|
2014-05-10 10:37:50 -06:00
|
|
|
|
|
|
|
modem: hsi-client {
|
|
|
|
compatible = "nokia,n900-modem";
|
|
|
|
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&modem_pins>;
|
|
|
|
|
|
|
|
hsi-channel-ids = <0>, <1>, <2>, <3>;
|
|
|
|
hsi-channel-names = "mcsaab-control",
|
|
|
|
"speech-control",
|
|
|
|
"speech-data",
|
|
|
|
"mcsaab-data";
|
|
|
|
hsi-speed-kbps = <55000>;
|
|
|
|
hsi-mode = "frame";
|
|
|
|
hsi-flow = "synchronized";
|
|
|
|
hsi-arb-mode = "round-robin";
|
|
|
|
|
|
|
|
interrupts-extended = <&gpio3 8 IRQ_TYPE_EDGE_FALLING>; /* 72 */
|
|
|
|
|
|
|
|
gpios = <&gpio3 6 GPIO_ACTIVE_HIGH>, /* 70 */
|
|
|
|
<&gpio3 9 GPIO_ACTIVE_HIGH>, /* 73 */
|
|
|
|
<&gpio3 10 GPIO_ACTIVE_HIGH>, /* 74 */
|
|
|
|
<&gpio3 11 GPIO_ACTIVE_HIGH>, /* 75 */
|
|
|
|
<&gpio5 29 GPIO_ACTIVE_HIGH>; /* 157 */
|
|
|
|
gpio-names = "cmt_apeslpx",
|
|
|
|
"cmt_rst_rq",
|
|
|
|
"cmt_en",
|
|
|
|
"cmt_rst",
|
|
|
|
"cmt_bsi";
|
|
|
|
};
|
2014-05-10 10:37:49 -06:00
|
|
|
};
|
|
|
|
|
|
|
|
&ssi_port2 {
|
|
|
|
status = "disabled";
|
2014-05-10 10:37:50 -06:00
|
|
|
};
|