189 lines
5.2 KiB
Plaintext
189 lines
5.2 KiB
Plaintext
![]() |
/*
|
||
|
* This program is free software; you can redistribute it and/or modify
|
||
|
* it under the terms of the GNU General Public License version 2 as
|
||
|
* published by the Free Software Foundation.
|
||
|
*/
|
||
|
/dts-v1/;
|
||
|
|
||
|
#include "omap443x.dtsi"
|
||
|
|
||
|
/ {
|
||
|
model = "Motorola Droid 4 XT894";
|
||
|
compatible = "motorola,droid4", "ti,omap4430", "ti,omap4";
|
||
|
|
||
|
chosen {
|
||
|
stdout-path = &uart3;
|
||
|
};
|
||
|
|
||
|
/*
|
||
|
* We seem to have only 1021 MB accessible, 1021 - 1022 is locked,
|
||
|
* then 1023 - 1024 seems to contain mbm. For SRAM, see the notes
|
||
|
* below about SRAM and L3_ICLK2 being unused by default,
|
||
|
*/
|
||
|
memory {
|
||
|
device_type = "memory";
|
||
|
reg = <0x80000000 0x3fd00000>; /* 1021 MB */
|
||
|
};
|
||
|
|
||
|
/* CPCAP really supports 1650000 to 3400000 range */
|
||
|
vmmc: regulator-mmc {
|
||
|
compatible = "regulator-fixed";
|
||
|
regulator-name = "vmmc";
|
||
|
regulator-min-microvolt = <3000000>;
|
||
|
regulator-max-microvolt = <3000000>;
|
||
|
regulator-always-on;
|
||
|
};
|
||
|
|
||
|
/* CPCAP really supports 3000000 to 3100000 range */
|
||
|
vemmc: regulator-emmc {
|
||
|
compatible = "regulator-fixed";
|
||
|
regulator-name = "vemmc";
|
||
|
regulator-min-microvolt = <3000000>;
|
||
|
regulator-max-microvolt = <3000000>;
|
||
|
regulator-always-on;
|
||
|
};
|
||
|
|
||
|
/* CPCAP really supports 1650000 to 1950000 range */
|
||
|
wl12xx_vmmc: regulator-wl12xx {
|
||
|
compatible = "regulator-fixed";
|
||
|
regulator-name = "vwl1271";
|
||
|
regulator-min-microvolt = <1650000>;
|
||
|
regulator-max-microvolt = <1650000>;
|
||
|
gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>; /* gpio94 */
|
||
|
startup-delay-us = <70000>;
|
||
|
enable-active-high;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
/* L3_2 interconnect is unused, SRAM, GPMC and L3_ICLK2 disabled */
|
||
|
&gpmc {
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
&mmc1 {
|
||
|
vmmc-supply = <&vmmc>;
|
||
|
bus-width = <4>;
|
||
|
cd-gpios = <&gpio4 10 GPIO_ACTIVE_LOW>; /* gpio106 */
|
||
|
};
|
||
|
|
||
|
&mmc2 {
|
||
|
vmmc-supply = <&vemmc>;
|
||
|
bus-width = <8>;
|
||
|
non-removable;
|
||
|
};
|
||
|
|
||
|
&mmc3 {
|
||
|
vmmc-supply = <&wl12xx_vmmc>;
|
||
|
interrupts-extended = <&wakeupgen GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH
|
||
|
&omap4_pmx_core 0xde>;
|
||
|
|
||
|
non-removable;
|
||
|
bus-width = <4>;
|
||
|
cap-power-off-card;
|
||
|
|
||
|
#address-cells = <1>;
|
||
|
#size-cells = <0>;
|
||
|
wlcore: wlcore@2 {
|
||
|
compatible = "ti,wl1283";
|
||
|
reg = <2>;
|
||
|
interrupt-parent = <&gpio4>;
|
||
|
interrupts = <4 IRQ_TYPE_LEVEL_HIGH>; /* gpio100 */
|
||
|
ref-clock-frequency = <26000000>;
|
||
|
tcxo-clock-frequency = <26000000>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
/* L3_2 interconnect is unused, SRAM, GPMC and L3_ICLK2 disabled */
|
||
|
&ocmcram {
|
||
|
status = "disabled";
|
||
|
};
|
||
|
|
||
|
&omap4_pmx_core {
|
||
|
usb_gpio_mux_sel1: pinmux_usb_gpio_mux_sel1_pins {
|
||
|
/* gpio_60 */
|
||
|
pinctrl-single,pins = <
|
||
|
OMAP4_IOPAD(0x088, PIN_OUTPUT | MUX_MODE3)
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
usb_ulpi_pins: pinmux_usb_ulpi_pins {
|
||
|
pinctrl-single,pins = <
|
||
|
OMAP4_IOPAD(0x196, MUX_MODE7)
|
||
|
OMAP4_IOPAD(0x198, MUX_MODE7)
|
||
|
OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE0)
|
||
|
OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE0)
|
||
|
OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE0)
|
||
|
OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE0)
|
||
|
OMAP4_IOPAD(0x1ba, PIN_INPUT_PULLUP | MUX_MODE0)
|
||
|
OMAP4_IOPAD(0x1bc, PIN_INPUT_PULLUP | MUX_MODE0)
|
||
|
OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE0)
|
||
|
OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE0)
|
||
|
OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE0)
|
||
|
OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE0)
|
||
|
OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE0)
|
||
|
OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE0)
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
/* usb0_otg_dp and usb0_otg_dm */
|
||
|
usb_utmi_pins: pinmux_usb_utmi_pins {
|
||
|
pinctrl-single,pins = <
|
||
|
OMAP4_IOPAD(0x196, PIN_INPUT | MUX_MODE0)
|
||
|
OMAP4_IOPAD(0x198, PIN_INPUT | MUX_MODE0)
|
||
|
OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE7)
|
||
|
OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE7)
|
||
|
OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE7)
|
||
|
OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE7)
|
||
|
OMAP4_IOPAD(0x1ba, PIN_INPUT_PULLUP | MUX_MODE7)
|
||
|
OMAP4_IOPAD(0x1bc, PIN_INPUT_PULLUP | MUX_MODE7)
|
||
|
OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE7)
|
||
|
OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE7)
|
||
|
OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE7)
|
||
|
OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE7)
|
||
|
OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE7)
|
||
|
OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE7)
|
||
|
>;
|
||
|
};
|
||
|
|
||
|
/* uart3_tx_irtx and uart3_rx_irrx */
|
||
|
uart3_pins: pinmux_uart3_pins {
|
||
|
pinctrl-single,pins = <
|
||
|
OMAP4_IOPAD(0x196, MUX_MODE7)
|
||
|
OMAP4_IOPAD(0x198, MUX_MODE7)
|
||
|
OMAP4_IOPAD(0x1b2, PIN_INPUT_PULLUP | MUX_MODE7)
|
||
|
OMAP4_IOPAD(0x1b4, PIN_INPUT_PULLUP | MUX_MODE7)
|
||
|
OMAP4_IOPAD(0x1b6, PIN_INPUT_PULLUP | MUX_MODE7)
|
||
|
OMAP4_IOPAD(0x1b8, PIN_INPUT_PULLUP | MUX_MODE7)
|
||
|
OMAP4_IOPAD(0x1ba, MUX_MODE2)
|
||
|
OMAP4_IOPAD(0x1bc, PIN_INPUT | MUX_MODE2)
|
||
|
OMAP4_IOPAD(0x1be, PIN_INPUT_PULLUP | MUX_MODE7)
|
||
|
OMAP4_IOPAD(0x1c0, PIN_INPUT_PULLUP | MUX_MODE7)
|
||
|
OMAP4_IOPAD(0x1c2, PIN_INPUT_PULLUP | MUX_MODE7)
|
||
|
OMAP4_IOPAD(0x1c4, PIN_INPUT_PULLUP | MUX_MODE7)
|
||
|
OMAP4_IOPAD(0x1c6, PIN_INPUT_PULLUP | MUX_MODE7)
|
||
|
OMAP4_IOPAD(0x1c8, PIN_INPUT_PULLUP | MUX_MODE7)
|
||
|
>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&omap4_pmx_wkup {
|
||
|
usb_gpio_mux_sel2: pinmux_usb_gpio_mux_sel2_pins {
|
||
|
/* gpio_wk0 */
|
||
|
pinctrl-single,pins = <
|
||
|
OMAP4_IOPAD(0x040, PIN_OUTPUT_PULLDOWN | MUX_MODE3)
|
||
|
>;
|
||
|
};
|
||
|
};
|
||
|
|
||
|
&uart3 {
|
||
|
interrupts-extended = <&wakeupgen GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH
|
||
|
&omap4_pmx_core 0x17c>;
|
||
|
};
|
||
|
|
||
|
/* Internal UTMI+ PHY used for OTG, CPCAP ULPI PHY for detection and charger */
|
||
|
&usb_otg_hs {
|
||
|
interface-type = <1>;
|
||
|
mode = <3>;
|
||
|
power = <50>;
|
||
|
};
|