2015-07-07 11:42:53 -06:00
|
|
|
/*
|
|
|
|
* Google Veyron (and derivatives) board device tree source
|
|
|
|
*
|
|
|
|
* Copyright 2015 Google, Inc
|
|
|
|
*
|
|
|
|
* This file is dual-licensed: you can use it either under the terms
|
|
|
|
* of the GPL or the X11 license, at your option. Note that this dual
|
|
|
|
* licensing only applies to this file, and not this project as a
|
|
|
|
* whole.
|
|
|
|
*
|
|
|
|
* a) This file is free software; you can redistribute it and/or
|
|
|
|
* modify it under the terms of the GNU General Public License as
|
|
|
|
* published by the Free Software Foundation; either version 2 of the
|
|
|
|
* License, or (at your option) any later version.
|
|
|
|
*
|
|
|
|
* This file is distributed in the hope that it will be useful,
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
* GNU General Public License for more details.
|
|
|
|
*
|
|
|
|
* Or, alternatively,
|
|
|
|
*
|
|
|
|
* b) Permission is hereby granted, free of charge, to any person
|
|
|
|
* obtaining a copy of this software and associated documentation
|
|
|
|
* files (the "Software"), to deal in the Software without
|
|
|
|
* restriction, including without limitation the rights to use,
|
|
|
|
* copy, modify, merge, publish, distribute, sublicense, and/or
|
|
|
|
* sell copies of the Software, and to permit persons to whom the
|
|
|
|
* Software is furnished to do so, subject to the following
|
|
|
|
* conditions:
|
|
|
|
*
|
|
|
|
* The above copyright notice and this permission notice shall be
|
|
|
|
* included in all copies or substantial portions of the Software.
|
|
|
|
*
|
|
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
|
|
|
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
|
|
|
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
|
|
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
|
|
|
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
|
|
|
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
|
|
|
* OTHER DEALINGS IN THE SOFTWARE.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <dt-bindings/clock/rockchip,rk808.h>
|
|
|
|
#include <dt-bindings/input/input.h>
|
|
|
|
#include "rk3288.dtsi"
|
|
|
|
|
|
|
|
/ {
|
2016-09-09 08:01:08 -06:00
|
|
|
memory@0 {
|
2015-07-07 11:42:53 -06:00
|
|
|
device_type = "memory";
|
|
|
|
reg = <0x0 0x80000000>;
|
|
|
|
};
|
|
|
|
|
|
|
|
gpio_keys: gpio-keys {
|
|
|
|
compatible = "gpio-keys";
|
|
|
|
#address-cells = <1>;
|
|
|
|
#size-cells = <0>;
|
|
|
|
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pwr_key_l>;
|
|
|
|
power {
|
|
|
|
label = "Power";
|
2016-10-22 06:54:55 -06:00
|
|
|
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
|
2015-07-07 11:42:53 -06:00
|
|
|
linux,code = <KEY_POWER>;
|
|
|
|
debounce-interval = <100>;
|
2016-02-08 14:55:12 -07:00
|
|
|
wakeup-source;
|
2015-07-07 11:42:53 -06:00
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
gpio-restart {
|
|
|
|
compatible = "gpio-restart";
|
2016-10-22 06:54:55 -06:00
|
|
|
gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
|
2015-07-07 11:42:53 -06:00
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&ap_warm_reset_h>;
|
|
|
|
priority = <200>;
|
|
|
|
};
|
|
|
|
|
|
|
|
emmc_pwrseq: emmc-pwrseq {
|
|
|
|
compatible = "mmc-pwrseq-emmc";
|
|
|
|
pinctrl-0 = <&emmc_reset>;
|
|
|
|
pinctrl-names = "default";
|
2016-10-22 06:54:55 -06:00
|
|
|
reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_HIGH>;
|
2015-07-07 11:42:53 -06:00
|
|
|
};
|
|
|
|
|
|
|
|
sdio_pwrseq: sdio-pwrseq {
|
|
|
|
compatible = "mmc-pwrseq-simple";
|
|
|
|
clocks = <&rk808 RK808_CLKOUT1>;
|
|
|
|
clock-names = "ext_clock";
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&bt_enable_l>, <&wifi_enable_h>;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* On the module itself this is one of these (depending
|
|
|
|
* on the actual card populated):
|
|
|
|
* - SDIO_RESET_L_WL_REG_ON
|
|
|
|
* - PDN (power down when low)
|
|
|
|
*/
|
2016-10-22 06:54:55 -06:00
|
|
|
reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>;
|
2015-07-07 11:42:53 -06:00
|
|
|
};
|
|
|
|
|
|
|
|
vcc_5v: vcc-5v {
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
regulator-name = "vcc_5v";
|
|
|
|
regulator-always-on;
|
|
|
|
regulator-boot-on;
|
|
|
|
regulator-min-microvolt = <5000000>;
|
|
|
|
regulator-max-microvolt = <5000000>;
|
|
|
|
};
|
|
|
|
|
|
|
|
vcc33_sys: vcc33-sys {
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
regulator-name = "vcc33_sys";
|
|
|
|
regulator-always-on;
|
|
|
|
regulator-boot-on;
|
|
|
|
regulator-min-microvolt = <3300000>;
|
|
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
};
|
|
|
|
|
|
|
|
vcc50_hdmi: vcc50-hdmi {
|
|
|
|
compatible = "regulator-fixed";
|
|
|
|
regulator-name = "vcc50_hdmi";
|
|
|
|
regulator-always-on;
|
|
|
|
regulator-boot-on;
|
|
|
|
vin-supply = <&vcc_5v>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
&cpu0 {
|
|
|
|
cpu0-supply = <&vdd_cpu>;
|
2015-08-06 14:57:08 -06:00
|
|
|
operating-points = <
|
|
|
|
/* KHz uV */
|
|
|
|
1800000 1400000
|
|
|
|
1704000 1350000
|
|
|
|
1608000 1300000
|
|
|
|
1512000 1250000
|
|
|
|
1416000 1200000
|
|
|
|
1200000 1100000
|
|
|
|
1008000 1050000
|
|
|
|
816000 1000000
|
|
|
|
696000 950000
|
|
|
|
600000 900000
|
|
|
|
408000 900000
|
|
|
|
216000 900000
|
|
|
|
126000 900000
|
|
|
|
>;
|
2015-07-07 11:42:53 -06:00
|
|
|
};
|
|
|
|
|
|
|
|
&emmc {
|
|
|
|
status = "okay";
|
|
|
|
|
|
|
|
bus-width = <8>;
|
|
|
|
cap-mmc-highspeed;
|
2015-10-12 06:48:30 -06:00
|
|
|
rockchip,default-sample-phase = <158>;
|
2015-07-07 11:42:53 -06:00
|
|
|
disable-wp;
|
2015-10-12 06:48:30 -06:00
|
|
|
mmc-hs200-1_8v;
|
2015-07-07 11:42:53 -06:00
|
|
|
mmc-pwrseq = <&emmc_pwrseq>;
|
|
|
|
non-removable;
|
|
|
|
num-slots = <1>;
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
|
|
|
|
};
|
|
|
|
|
|
|
|
&hdmi {
|
2015-09-02 15:25:48 -06:00
|
|
|
ddc-i2c-bus = <&i2c5>;
|
2015-07-07 11:42:53 -06:00
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&i2c0 {
|
|
|
|
status = "okay";
|
|
|
|
|
|
|
|
clock-frequency = <400000>;
|
|
|
|
i2c-scl-falling-time-ns = <50>; /* 2.5ns measured */
|
|
|
|
i2c-scl-rising-time-ns = <100>; /* 45ns measured */
|
|
|
|
|
|
|
|
rk808: pmic@1b {
|
|
|
|
compatible = "rockchip,rk808";
|
|
|
|
reg = <0x1b>;
|
|
|
|
clock-output-names = "xin32k", "wifibt_32kin";
|
|
|
|
interrupt-parent = <&gpio0>;
|
2016-10-22 06:54:55 -06:00
|
|
|
interrupts = <RK_PA4 IRQ_TYPE_LEVEL_LOW>;
|
2015-07-07 11:42:53 -06:00
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&pmic_int_l>;
|
|
|
|
rockchip,system-power-controller;
|
|
|
|
wakeup-source;
|
|
|
|
#clock-cells = <1>;
|
|
|
|
|
|
|
|
vcc1-supply = <&vcc33_sys>;
|
|
|
|
vcc2-supply = <&vcc33_sys>;
|
|
|
|
vcc3-supply = <&vcc33_sys>;
|
|
|
|
vcc4-supply = <&vcc33_sys>;
|
|
|
|
vcc6-supply = <&vcc_5v>;
|
|
|
|
vcc7-supply = <&vcc33_sys>;
|
|
|
|
vcc8-supply = <&vcc33_sys>;
|
|
|
|
vcc12-supply = <&vcc_18>;
|
|
|
|
vddio-supply = <&vcc33_io>;
|
|
|
|
|
|
|
|
regulators {
|
|
|
|
vdd_cpu: DCDC_REG1 {
|
|
|
|
regulator-name = "vdd_arm";
|
|
|
|
regulator-always-on;
|
|
|
|
regulator-boot-on;
|
|
|
|
regulator-min-microvolt = <750000>;
|
|
|
|
regulator-max-microvolt = <1450000>;
|
|
|
|
regulator-ramp-delay = <6001>;
|
|
|
|
regulator-state-mem {
|
|
|
|
regulator-off-in-suspend;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
vdd_gpu: DCDC_REG2 {
|
|
|
|
regulator-name = "vdd_gpu";
|
|
|
|
regulator-always-on;
|
|
|
|
regulator-boot-on;
|
|
|
|
regulator-min-microvolt = <800000>;
|
|
|
|
regulator-max-microvolt = <1250000>;
|
|
|
|
regulator-ramp-delay = <6001>;
|
|
|
|
regulator-state-mem {
|
|
|
|
regulator-on-in-suspend;
|
|
|
|
regulator-suspend-microvolt = <1000000>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
vcc135_ddr: DCDC_REG3 {
|
|
|
|
regulator-name = "vcc135_ddr";
|
|
|
|
regulator-always-on;
|
|
|
|
regulator-boot-on;
|
|
|
|
regulator-state-mem {
|
|
|
|
regulator-on-in-suspend;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* vcc_18 has several aliases. (vcc18_flashio and
|
|
|
|
* vcc18_wl). We'll add those aliases here just to
|
|
|
|
* make it easier to follow the schematic. The signals
|
|
|
|
* are actually hooked together and only separated for
|
|
|
|
* power measurement purposes).
|
|
|
|
*/
|
|
|
|
vcc18_wl: vcc18_flashio: vcc_18: DCDC_REG4 {
|
|
|
|
regulator-name = "vcc_18";
|
|
|
|
regulator-always-on;
|
|
|
|
regulator-boot-on;
|
|
|
|
regulator-min-microvolt = <1800000>;
|
|
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
regulator-state-mem {
|
|
|
|
regulator-on-in-suspend;
|
|
|
|
regulator-suspend-microvolt = <1800000>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Note that both vcc33_io and vcc33_pmuio are always
|
|
|
|
* powered together. To simplify the logic in the dts
|
|
|
|
* we just refer to vcc33_io every time something is
|
|
|
|
* powered from vcc33_pmuio. In fact, on later boards
|
|
|
|
* (such as danger) they're the same net.
|
|
|
|
*/
|
|
|
|
vcc33_io: LDO_REG1 {
|
|
|
|
regulator-name = "vcc33_io";
|
|
|
|
regulator-always-on;
|
|
|
|
regulator-boot-on;
|
|
|
|
regulator-min-microvolt = <3300000>;
|
|
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
regulator-state-mem {
|
|
|
|
regulator-on-in-suspend;
|
|
|
|
regulator-suspend-microvolt = <3300000>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
vdd_10: LDO_REG3 {
|
|
|
|
regulator-name = "vdd_10";
|
|
|
|
regulator-always-on;
|
|
|
|
regulator-boot-on;
|
|
|
|
regulator-min-microvolt = <1000000>;
|
|
|
|
regulator-max-microvolt = <1000000>;
|
|
|
|
regulator-state-mem {
|
|
|
|
regulator-on-in-suspend;
|
|
|
|
regulator-suspend-microvolt = <1000000>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
vdd10_lcd_pwren_h: LDO_REG7 {
|
|
|
|
regulator-name = "vdd10_lcd_pwren_h";
|
|
|
|
regulator-always-on;
|
|
|
|
regulator-boot-on;
|
|
|
|
regulator-min-microvolt = <2500000>;
|
|
|
|
regulator-max-microvolt = <2500000>;
|
|
|
|
regulator-state-mem {
|
|
|
|
regulator-off-in-suspend;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
vcc33_lcd: SWITCH_REG1 {
|
|
|
|
regulator-name = "vcc33_lcd";
|
|
|
|
regulator-always-on;
|
|
|
|
regulator-boot-on;
|
|
|
|
regulator-state-mem {
|
|
|
|
regulator-off-in-suspend;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
&i2c1 {
|
|
|
|
status = "okay";
|
|
|
|
|
|
|
|
clock-frequency = <400000>;
|
|
|
|
i2c-scl-falling-time-ns = <50>; /* 2.5ns measured */
|
|
|
|
i2c-scl-rising-time-ns = <100>; /* 40ns measured */
|
|
|
|
|
|
|
|
tpm: tpm@20 {
|
|
|
|
compatible = "infineon,slb9645tt";
|
|
|
|
reg = <0x20>;
|
|
|
|
powered-while-suspended;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
&i2c2 {
|
|
|
|
status = "okay";
|
|
|
|
|
|
|
|
/* 100kHz since 4.7k resistors don't rise fast enough */
|
|
|
|
clock-frequency = <100000>;
|
|
|
|
i2c-scl-falling-time-ns = <50>; /* 10ns measured */
|
|
|
|
i2c-scl-rising-time-ns = <800>; /* 600ns measured */
|
|
|
|
};
|
|
|
|
|
|
|
|
&i2c4 {
|
|
|
|
status = "okay";
|
|
|
|
|
|
|
|
clock-frequency = <400000>;
|
|
|
|
i2c-scl-falling-time-ns = <50>; /* 11ns measured */
|
|
|
|
i2c-scl-rising-time-ns = <300>; /* 225ns measured */
|
|
|
|
};
|
|
|
|
|
|
|
|
&i2c5 {
|
|
|
|
status = "okay";
|
|
|
|
|
|
|
|
clock-frequency = <100000>;
|
|
|
|
i2c-scl-falling-time-ns = <300>;
|
|
|
|
i2c-scl-rising-time-ns = <1000>;
|
|
|
|
};
|
|
|
|
|
2016-05-20 17:36:17 -06:00
|
|
|
&io_domains {
|
|
|
|
status = "okay";
|
|
|
|
|
|
|
|
bb-supply = <&vcc33_io>;
|
|
|
|
dvp-supply = <&vcc_18>;
|
|
|
|
flash0-supply = <&vcc18_flashio>;
|
|
|
|
gpio1830-supply = <&vcc33_io>;
|
|
|
|
gpio30-supply = <&vcc33_io>;
|
|
|
|
lcdc-supply = <&vcc33_lcd>;
|
|
|
|
wifi-supply = <&vcc18_wl>;
|
|
|
|
};
|
|
|
|
|
2015-07-07 11:42:53 -06:00
|
|
|
&pwm1 {
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&sdio0 {
|
|
|
|
status = "okay";
|
|
|
|
|
|
|
|
bus-width = <4>;
|
|
|
|
cap-sd-highspeed;
|
|
|
|
cap-sdio-irq;
|
|
|
|
keep-power-in-suspend;
|
|
|
|
mmc-pwrseq = <&sdio_pwrseq>;
|
|
|
|
non-removable;
|
|
|
|
num-slots = <1>;
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&sdio0_clk &sdio0_cmd &sdio0_bus4>;
|
2015-10-12 06:48:30 -06:00
|
|
|
sd-uhs-sdr12;
|
|
|
|
sd-uhs-sdr25;
|
|
|
|
sd-uhs-sdr50;
|
|
|
|
sd-uhs-sdr104;
|
2015-07-07 11:42:53 -06:00
|
|
|
vmmc-supply = <&vcc33_sys>;
|
|
|
|
vqmmc-supply = <&vcc18_wl>;
|
|
|
|
};
|
|
|
|
|
|
|
|
&spi2 {
|
|
|
|
status = "okay";
|
|
|
|
|
|
|
|
rx-sample-delay-ns = <12>;
|
2016-05-05 19:02:44 -06:00
|
|
|
|
|
|
|
flash@0 {
|
|
|
|
compatible = "jedec,spi-nor";
|
|
|
|
spi-max-frequency = <50000000>;
|
|
|
|
reg = <0>;
|
|
|
|
};
|
2015-07-07 11:42:53 -06:00
|
|
|
};
|
|
|
|
|
|
|
|
&tsadc {
|
|
|
|
status = "okay";
|
|
|
|
|
2015-07-21 23:44:06 -06:00
|
|
|
rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
|
|
|
|
rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
|
2015-07-07 11:42:53 -06:00
|
|
|
};
|
|
|
|
|
|
|
|
&uart0 {
|
|
|
|
status = "okay";
|
|
|
|
|
|
|
|
/* We need to go faster than 24MHz, so adjust clock parents / rates */
|
|
|
|
assigned-clocks = <&cru SCLK_UART0>;
|
|
|
|
assigned-clock-rates = <48000000>;
|
|
|
|
|
|
|
|
/* Pins don't include flow control by default; add that in */
|
|
|
|
pinctrl-names = "default";
|
|
|
|
pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
|
|
|
|
};
|
|
|
|
|
|
|
|
&uart1 {
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&uart2 {
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&usbphy {
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&usb_host0_ehci {
|
|
|
|
status = "okay";
|
|
|
|
|
|
|
|
needs-reset-on-resume;
|
|
|
|
};
|
|
|
|
|
|
|
|
&usb_host1 {
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&usb_otg {
|
|
|
|
status = "okay";
|
|
|
|
|
|
|
|
assigned-clocks = <&cru SCLK_USBPHY480M_SRC>;
|
2015-11-19 14:22:28 -07:00
|
|
|
assigned-clock-parents = <&usbphy0>;
|
2015-07-07 11:42:53 -06:00
|
|
|
dr_mode = "host";
|
|
|
|
};
|
|
|
|
|
|
|
|
&vopb {
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&vopb_mmu {
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&wdt {
|
|
|
|
status = "okay";
|
|
|
|
};
|
|
|
|
|
|
|
|
&pinctrl {
|
|
|
|
pinctrl-names = "default", "sleep";
|
|
|
|
pinctrl-0 = <
|
|
|
|
/* Common for sleep and wake, but no owners */
|
|
|
|
&global_pwroff
|
|
|
|
>;
|
|
|
|
pinctrl-1 = <
|
|
|
|
/* Common for sleep and wake, but no owners */
|
|
|
|
&global_pwroff
|
|
|
|
>;
|
|
|
|
|
|
|
|
pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma {
|
|
|
|
bias-disable;
|
|
|
|
drive-strength = <8>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pcfg_pull_up_drv_8ma: pcfg-pull-up-drv-8ma {
|
|
|
|
bias-pull-up;
|
|
|
|
drive-strength = <8>;
|
|
|
|
};
|
|
|
|
|
|
|
|
pcfg_output_high: pcfg-output-high {
|
|
|
|
output-high;
|
|
|
|
};
|
|
|
|
|
|
|
|
pcfg_output_low: pcfg-output-low {
|
|
|
|
output-low;
|
|
|
|
};
|
|
|
|
|
|
|
|
buttons {
|
|
|
|
pwr_key_l: pwr-key-l {
|
|
|
|
rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
emmc {
|
|
|
|
emmc_reset: emmc-reset {
|
|
|
|
rockchip,pins = <2 9 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* We run eMMC at max speed; bump up drive strength.
|
|
|
|
* We also have external pulls, so disable the internal ones.
|
|
|
|
*/
|
|
|
|
emmc_clk: emmc-clk {
|
|
|
|
rockchip,pins = <3 18 RK_FUNC_2 &pcfg_pull_none_drv_8ma>;
|
|
|
|
};
|
|
|
|
|
|
|
|
emmc_cmd: emmc-cmd {
|
|
|
|
rockchip,pins = <3 16 RK_FUNC_2 &pcfg_pull_none_drv_8ma>;
|
|
|
|
};
|
|
|
|
|
|
|
|
emmc_bus8: emmc-bus8 {
|
|
|
|
rockchip,pins = <3 0 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
|
|
|
|
<3 1 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
|
|
|
|
<3 2 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
|
|
|
|
<3 3 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
|
|
|
|
<3 4 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
|
|
|
|
<3 5 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
|
|
|
|
<3 6 RK_FUNC_2 &pcfg_pull_none_drv_8ma>,
|
|
|
|
<3 7 RK_FUNC_2 &pcfg_pull_none_drv_8ma>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
pmic {
|
|
|
|
pmic_int_l: pmic-int-l {
|
|
|
|
rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
reboot {
|
|
|
|
ap_warm_reset_h: ap-warm-reset-h {
|
|
|
|
rockchip,pins = <RK_GPIO0 13 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
recovery-switch {
|
|
|
|
rec_mode_l: rec-mode-l {
|
|
|
|
rockchip,pins = <0 9 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
sdio0 {
|
|
|
|
wifi_enable_h: wifienable-h {
|
|
|
|
rockchip,pins = <4 28 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
|
|
};
|
|
|
|
|
|
|
|
/* NOTE: mislabelled on schematic; should be bt_enable_h */
|
|
|
|
bt_enable_l: bt-enable-l {
|
|
|
|
rockchip,pins = <4 29 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* We run sdio0 at max speed; bump up drive strength.
|
|
|
|
* We also have external pulls, so disable the internal ones.
|
|
|
|
*/
|
|
|
|
sdio0_bus4: sdio0-bus4 {
|
|
|
|
rockchip,pins = <4 20 RK_FUNC_1 &pcfg_pull_none_drv_8ma>,
|
|
|
|
<4 21 RK_FUNC_1 &pcfg_pull_none_drv_8ma>,
|
|
|
|
<4 22 RK_FUNC_1 &pcfg_pull_none_drv_8ma>,
|
|
|
|
<4 23 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
|
|
|
|
};
|
|
|
|
|
|
|
|
sdio0_cmd: sdio0-cmd {
|
|
|
|
rockchip,pins = <4 24 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
|
|
|
|
};
|
|
|
|
|
|
|
|
sdio0_clk: sdio0-clk {
|
|
|
|
rockchip,pins = <4 25 RK_FUNC_1 &pcfg_pull_none_drv_8ma>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
tpm {
|
|
|
|
tpm_int_h: tpm-int-h {
|
|
|
|
rockchip,pins = <7 4 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
|
|
|
|
write-protect {
|
|
|
|
fw_wp_ap: fw-wp-ap {
|
|
|
|
rockchip,pins = <7 6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
|
|
};
|
|
|
|
};
|
|
|
|
};
|