1
0
Fork 0
remarkable-linux/drivers/infiniband/hw/cxgb4/cm.c

4271 lines
114 KiB
C
Raw Normal View History

/*
* Copyright (c) 2009-2014 Chelsio, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#include <linux/module.h>
#include <linux/list.h>
#include <linux/workqueue.h>
#include <linux/skbuff.h>
#include <linux/timer.h>
#include <linux/notifier.h>
#include <linux/inetdevice.h>
#include <linux/ip.h>
#include <linux/tcp.h>
#include <linux/if_vlan.h>
#include <net/neighbour.h>
#include <net/netevent.h>
#include <net/route.h>
#include <net/tcp.h>
#include <net/ip6_route.h>
#include <net/addrconf.h>
#include <rdma/ib_addr.h>
#include <libcxgb_cm.h>
#include "iw_cxgb4.h"
#include "clip_tbl.h"
static char *states[] = {
"idle",
"listen",
"connecting",
"mpa_wait_req",
"mpa_req_sent",
"mpa_req_rcvd",
"mpa_rep_sent",
"fpdu_mode",
"aborting",
"closing",
"moribund",
"dead",
NULL,
};
static int nocong;
module_param(nocong, int, 0644);
MODULE_PARM_DESC(nocong, "Turn of congestion control (default=0)");
static int enable_ecn;
module_param(enable_ecn, int, 0644);
MODULE_PARM_DESC(enable_ecn, "Enable ECN (default=0/disabled)");
static int dack_mode = 1;
module_param(dack_mode, int, 0644);
MODULE_PARM_DESC(dack_mode, "Delayed ack mode (default=1)");
uint c4iw_max_read_depth = 32;
module_param(c4iw_max_read_depth, int, 0644);
MODULE_PARM_DESC(c4iw_max_read_depth,
"Per-connection max ORD/IRD (default=32)");
static int enable_tcp_timestamps;
module_param(enable_tcp_timestamps, int, 0644);
MODULE_PARM_DESC(enable_tcp_timestamps, "Enable tcp timestamps (default=0)");
static int enable_tcp_sack;
module_param(enable_tcp_sack, int, 0644);
MODULE_PARM_DESC(enable_tcp_sack, "Enable tcp SACK (default=0)");
static int enable_tcp_window_scaling = 1;
module_param(enable_tcp_window_scaling, int, 0644);
MODULE_PARM_DESC(enable_tcp_window_scaling,
"Enable tcp window scaling (default=1)");
int c4iw_debug;
module_param(c4iw_debug, int, 0644);
MODULE_PARM_DESC(c4iw_debug, "obsolete");
static int peer2peer = 1;
module_param(peer2peer, int, 0644);
MODULE_PARM_DESC(peer2peer, "Support peer2peer ULPs (default=1)");
static int p2p_type = FW_RI_INIT_P2PTYPE_READ_REQ;
module_param(p2p_type, int, 0644);
MODULE_PARM_DESC(p2p_type, "RDMAP opcode to use for the RTR message: "
"1=RDMA_READ 0=RDMA_WRITE (default 1)");
static int ep_timeout_secs = 60;
module_param(ep_timeout_secs, int, 0644);
MODULE_PARM_DESC(ep_timeout_secs, "CM Endpoint operation timeout "
"in seconds (default=60)");
static int mpa_rev = 2;
module_param(mpa_rev, int, 0644);
MODULE_PARM_DESC(mpa_rev, "MPA Revision, 0 supports amso1100, "
"1 is RFC5044 spec compliant, 2 is IETF MPA Peer Connect Draft"
" compliant (default=2)");
static int markers_enabled;
module_param(markers_enabled, int, 0644);
MODULE_PARM_DESC(markers_enabled, "Enable MPA MARKERS (default(0)=disabled)");
static int crc_enabled = 1;
module_param(crc_enabled, int, 0644);
MODULE_PARM_DESC(crc_enabled, "Enable MPA CRC (default(1)=enabled)");
static int rcv_win = 256 * 1024;
module_param(rcv_win, int, 0644);
MODULE_PARM_DESC(rcv_win, "TCP receive window in bytes (default=256KB)");
static int snd_win = 128 * 1024;
module_param(snd_win, int, 0644);
MODULE_PARM_DESC(snd_win, "TCP send window in bytes (default=128KB)");
static struct workqueue_struct *workq;
static struct sk_buff_head rxq;
static struct sk_buff *get_skb(struct sk_buff *skb, int len, gfp_t gfp);
static void ep_timeout(unsigned long arg);
static void connect_reply_upcall(struct c4iw_ep *ep, int status);
static int sched(struct c4iw_dev *dev, struct sk_buff *skb);
static LIST_HEAD(timeout_list);
static spinlock_t timeout_lock;
static void deref_cm_id(struct c4iw_ep_common *epc)
{
epc->cm_id->rem_ref(epc->cm_id);
epc->cm_id = NULL;
set_bit(CM_ID_DEREFED, &epc->history);
}
static void ref_cm_id(struct c4iw_ep_common *epc)
{
set_bit(CM_ID_REFED, &epc->history);
epc->cm_id->add_ref(epc->cm_id);
}
static void deref_qp(struct c4iw_ep *ep)
{
c4iw_qp_rem_ref(&ep->com.qp->ibqp);
clear_bit(QP_REFERENCED, &ep->com.flags);
set_bit(QP_DEREFED, &ep->com.history);
}
static void ref_qp(struct c4iw_ep *ep)
{
set_bit(QP_REFERENCED, &ep->com.flags);
set_bit(QP_REFED, &ep->com.history);
c4iw_qp_add_ref(&ep->com.qp->ibqp);
}
static void start_ep_timer(struct c4iw_ep *ep)
{
pr_debug("%s ep %p\n", __func__, ep);
if (timer_pending(&ep->timer)) {
pr_err("%s timer already started! ep %p\n",
__func__, ep);
return;
}
clear_bit(TIMEOUT, &ep->com.flags);
c4iw_get_ep(&ep->com);
ep->timer.expires = jiffies + ep_timeout_secs * HZ;
ep->timer.data = (unsigned long)ep;
ep->timer.function = ep_timeout;
add_timer(&ep->timer);
}
RDMA/cxgb4: Endpoint timeout fixes 1) timedout endpoint processing can be starved. If there are continual CPL messages flowing into the driver, the endpoint timeout processing can be starved. This condition exposed the other bugs below. Solution: In process_work(), call process_timedout_eps() after each CPL is processed. 2) Connection events can be processed even though the endpoint is on the timeout list. If the endpoint is scheduled for timeout processing, then we must ignore MPA Start Requests and Replies. Solution: Change stop_ep_timer() to return 1 if the ep has already been queued for timeout processing. All the callers of stop_ep_timer() need to check this and act accordingly. There are just a few cases where the caller needs to do something different if stop_ep_timer() returns 1: 1) in process_mpa_reply(), ignore the reply and process_timeout() will abort the connection. 2) in process_mpa_request, ignore the request and process_timeout() will abort the connection. It is ok for callers of stop_ep_timer() to abort the connection since that will leave the state in ABORTING or DEAD, and process_timeout() now ignores timeouts when the ep is in these states. 3) Double insertion on the timeout list. Since the endpoint timers are used for connection setup and teardown, we need to guard against the possibility that an endpoint is already on the timeout list. This is a rare condition and only seen under heavy load and in the presense of the above 2 bugs. Solution: In ep_timeout(), don't queue the endpoint if it is already on the queue. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-09 08:38:25 -06:00
static int stop_ep_timer(struct c4iw_ep *ep)
{
pr_debug("%s ep %p stopping\n", __func__, ep);
del_timer_sync(&ep->timer);
RDMA/cxgb4: Endpoint timeout fixes 1) timedout endpoint processing can be starved. If there are continual CPL messages flowing into the driver, the endpoint timeout processing can be starved. This condition exposed the other bugs below. Solution: In process_work(), call process_timedout_eps() after each CPL is processed. 2) Connection events can be processed even though the endpoint is on the timeout list. If the endpoint is scheduled for timeout processing, then we must ignore MPA Start Requests and Replies. Solution: Change stop_ep_timer() to return 1 if the ep has already been queued for timeout processing. All the callers of stop_ep_timer() need to check this and act accordingly. There are just a few cases where the caller needs to do something different if stop_ep_timer() returns 1: 1) in process_mpa_reply(), ignore the reply and process_timeout() will abort the connection. 2) in process_mpa_request, ignore the request and process_timeout() will abort the connection. It is ok for callers of stop_ep_timer() to abort the connection since that will leave the state in ABORTING or DEAD, and process_timeout() now ignores timeouts when the ep is in these states. 3) Double insertion on the timeout list. Since the endpoint timers are used for connection setup and teardown, we need to guard against the possibility that an endpoint is already on the timeout list. This is a rare condition and only seen under heavy load and in the presense of the above 2 bugs. Solution: In ep_timeout(), don't queue the endpoint if it is already on the queue. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-09 08:38:25 -06:00
if (!test_and_set_bit(TIMEOUT, &ep->com.flags)) {
c4iw_put_ep(&ep->com);
RDMA/cxgb4: Endpoint timeout fixes 1) timedout endpoint processing can be starved. If there are continual CPL messages flowing into the driver, the endpoint timeout processing can be starved. This condition exposed the other bugs below. Solution: In process_work(), call process_timedout_eps() after each CPL is processed. 2) Connection events can be processed even though the endpoint is on the timeout list. If the endpoint is scheduled for timeout processing, then we must ignore MPA Start Requests and Replies. Solution: Change stop_ep_timer() to return 1 if the ep has already been queued for timeout processing. All the callers of stop_ep_timer() need to check this and act accordingly. There are just a few cases where the caller needs to do something different if stop_ep_timer() returns 1: 1) in process_mpa_reply(), ignore the reply and process_timeout() will abort the connection. 2) in process_mpa_request, ignore the request and process_timeout() will abort the connection. It is ok for callers of stop_ep_timer() to abort the connection since that will leave the state in ABORTING or DEAD, and process_timeout() now ignores timeouts when the ep is in these states. 3) Double insertion on the timeout list. Since the endpoint timers are used for connection setup and teardown, we need to guard against the possibility that an endpoint is already on the timeout list. This is a rare condition and only seen under heavy load and in the presense of the above 2 bugs. Solution: In ep_timeout(), don't queue the endpoint if it is already on the queue. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-09 08:38:25 -06:00
return 0;
}
return 1;
}
static int c4iw_l2t_send(struct c4iw_rdev *rdev, struct sk_buff *skb,
struct l2t_entry *l2e)
{
int error = 0;
if (c4iw_fatal_error(rdev)) {
kfree_skb(skb);
pr_debug("%s - device in error state - dropping\n", __func__);
return -EIO;
}
error = cxgb4_l2t_send(rdev->lldi.ports[0], skb, l2e);
if (error < 0)
kfree_skb(skb);
else if (error == NET_XMIT_DROP)
return -ENOMEM;
return error < 0 ? error : 0;
}
int c4iw_ofld_send(struct c4iw_rdev *rdev, struct sk_buff *skb)
{
int error = 0;
if (c4iw_fatal_error(rdev)) {
kfree_skb(skb);
pr_debug("%s - device in error state - dropping\n", __func__);
return -EIO;
}
error = cxgb4_ofld_send(rdev->lldi.ports[0], skb);
if (error < 0)
kfree_skb(skb);
return error < 0 ? error : 0;
}
static void release_tid(struct c4iw_rdev *rdev, u32 hwtid, struct sk_buff *skb)
{
u32 len = roundup(sizeof(struct cpl_tid_release), 16);
skb = get_skb(skb, len, GFP_KERNEL);
if (!skb)
return;
cxgb_mk_tid_release(skb, len, hwtid, 0);
c4iw_ofld_send(rdev, skb);
return;
}
static void set_emss(struct c4iw_ep *ep, u16 opt)
{
ep->emss = ep->com.dev->rdev.lldi.mtus[TCPOPT_MSS_G(opt)] -
((AF_INET == ep->com.remote_addr.ss_family) ?
sizeof(struct iphdr) : sizeof(struct ipv6hdr)) -
sizeof(struct tcphdr);
ep->mss = ep->emss;
if (TCPOPT_TSTAMP_G(opt))
ep->emss -= round_up(TCPOLEN_TIMESTAMP, 4);
if (ep->emss < 128)
ep->emss = 128;
if (ep->emss & 7)
pr_debug("Warning: misaligned mtu idx %u mss %u emss=%u\n",
TCPOPT_MSS_G(opt), ep->mss, ep->emss);
pr_debug("%s mss_idx %u mss %u emss=%u\n", __func__, TCPOPT_MSS_G(opt),
ep->mss, ep->emss);
}
static enum c4iw_ep_state state_read(struct c4iw_ep_common *epc)
{
enum c4iw_ep_state state;
mutex_lock(&epc->mutex);
state = epc->state;
mutex_unlock(&epc->mutex);
return state;
}
static void __state_set(struct c4iw_ep_common *epc, enum c4iw_ep_state new)
{
epc->state = new;
}
static void state_set(struct c4iw_ep_common *epc, enum c4iw_ep_state new)
{
mutex_lock(&epc->mutex);
pr_debug("%s - %s -> %s\n", __func__, states[epc->state], states[new]);
__state_set(epc, new);
mutex_unlock(&epc->mutex);
return;
}
static int alloc_ep_skb_list(struct sk_buff_head *ep_skb_list, int size)
{
struct sk_buff *skb;
unsigned int i;
size_t len;
len = roundup(sizeof(union cpl_wr_size), 16);
for (i = 0; i < size; i++) {
skb = alloc_skb(len, GFP_KERNEL);
if (!skb)
goto fail;
skb_queue_tail(ep_skb_list, skb);
}
return 0;
fail:
skb_queue_purge(ep_skb_list);
return -ENOMEM;
}
static void *alloc_ep(int size, gfp_t gfp)
{
struct c4iw_ep_common *epc;
epc = kzalloc(size, gfp);
if (epc) {
kref_init(&epc->kref);
mutex_init(&epc->mutex);
c4iw_init_wr_wait(&epc->wr_wait);
}
pr_debug("%s alloc ep %p\n", __func__, epc);
return epc;
}
static void remove_ep_tid(struct c4iw_ep *ep)
{
unsigned long flags;
spin_lock_irqsave(&ep->com.dev->lock, flags);
_remove_handle(ep->com.dev, &ep->com.dev->hwtid_idr, ep->hwtid, 0);
if (idr_is_empty(&ep->com.dev->hwtid_idr))
wake_up(&ep->com.dev->wait);
spin_unlock_irqrestore(&ep->com.dev->lock, flags);
}
static void insert_ep_tid(struct c4iw_ep *ep)
{
unsigned long flags;
spin_lock_irqsave(&ep->com.dev->lock, flags);
_insert_handle(ep->com.dev, &ep->com.dev->hwtid_idr, ep, ep->hwtid, 0);
spin_unlock_irqrestore(&ep->com.dev->lock, flags);
}
/*
* Atomically lookup the ep ptr given the tid and grab a reference on the ep.
*/
static struct c4iw_ep *get_ep_from_tid(struct c4iw_dev *dev, unsigned int tid)
{
struct c4iw_ep *ep;
unsigned long flags;
spin_lock_irqsave(&dev->lock, flags);
ep = idr_find(&dev->hwtid_idr, tid);
if (ep)
c4iw_get_ep(&ep->com);
spin_unlock_irqrestore(&dev->lock, flags);
return ep;
}
/*
* Atomically lookup the ep ptr given the stid and grab a reference on the ep.
*/
static struct c4iw_listen_ep *get_ep_from_stid(struct c4iw_dev *dev,
unsigned int stid)
{
struct c4iw_listen_ep *ep;
unsigned long flags;
spin_lock_irqsave(&dev->lock, flags);
ep = idr_find(&dev->stid_idr, stid);
if (ep)
c4iw_get_ep(&ep->com);
spin_unlock_irqrestore(&dev->lock, flags);
return ep;
}
void _c4iw_free_ep(struct kref *kref)
{
struct c4iw_ep *ep;
ep = container_of(kref, struct c4iw_ep, com.kref);
pr_debug("%s ep %p state %s\n", __func__, ep, states[ep->com.state]);
if (test_bit(QP_REFERENCED, &ep->com.flags))
deref_qp(ep);
if (test_bit(RELEASE_RESOURCES, &ep->com.flags)) {
if (ep->com.remote_addr.ss_family == AF_INET6) {
struct sockaddr_in6 *sin6 =
(struct sockaddr_in6 *)
&ep->com.local_addr;
cxgb4_clip_release(
ep->com.dev->rdev.lldi.ports[0],
(const u32 *)&sin6->sin6_addr.s6_addr,
1);
}
cxgb4_remove_tid(ep->com.dev->rdev.lldi.tids, 0, ep->hwtid,
ep->com.local_addr.ss_family);
dst_release(ep->dst);
cxgb4_l2t_release(ep->l2t);
if (ep->mpa_skb)
kfree_skb(ep->mpa_skb);
}
if (!skb_queue_empty(&ep->com.ep_skb_list))
skb_queue_purge(&ep->com.ep_skb_list);
kfree(ep);
}
static void release_ep_resources(struct c4iw_ep *ep)
{
set_bit(RELEASE_RESOURCES, &ep->com.flags);
/*
* If we have a hwtid, then remove it from the idr table
* so lookups will no longer find this endpoint. Otherwise
* we have a race where one thread finds the ep ptr just
* before the other thread is freeing the ep memory.
*/
if (ep->hwtid != -1)
remove_ep_tid(ep);
c4iw_put_ep(&ep->com);
}
static int status2errno(int status)
{
switch (status) {
case CPL_ERR_NONE:
return 0;
case CPL_ERR_CONN_RESET:
return -ECONNRESET;
case CPL_ERR_ARP_MISS:
return -EHOSTUNREACH;
case CPL_ERR_CONN_TIMEDOUT:
return -ETIMEDOUT;
case CPL_ERR_TCAM_FULL:
return -ENOMEM;
case CPL_ERR_CONN_EXIST:
return -EADDRINUSE;
default:
return -EIO;
}
}
/*
* Try and reuse skbs already allocated...
*/
static struct sk_buff *get_skb(struct sk_buff *skb, int len, gfp_t gfp)
{
if (skb && !skb_is_nonlinear(skb) && !skb_cloned(skb)) {
skb_trim(skb, 0);
skb_get(skb);
skb_reset_transport_header(skb);
} else {
skb = alloc_skb(len, gfp);
}
t4_set_arp_err_handler(skb, NULL, NULL);
return skb;
}
static struct net_device *get_real_dev(struct net_device *egress_dev)
{
return rdma_vlan_dev_real_dev(egress_dev) ? : egress_dev;
}
static void arp_failure_discard(void *handle, struct sk_buff *skb)
{
pr_err("ARP failure\n");
kfree_skb(skb);
}
static void mpa_start_arp_failure(void *handle, struct sk_buff *skb)
{
pr_err("ARP failure during MPA Negotiation - Closing Connection\n");
}
enum {
NUM_FAKE_CPLS = 2,
FAKE_CPL_PUT_EP_SAFE = NUM_CPL_CMDS + 0,
FAKE_CPL_PASS_PUT_EP_SAFE = NUM_CPL_CMDS + 1,
};
static int _put_ep_safe(struct c4iw_dev *dev, struct sk_buff *skb)
{
struct c4iw_ep *ep;
ep = *((struct c4iw_ep **)(skb->cb + 2 * sizeof(void *)));
release_ep_resources(ep);
kfree_skb(skb);
return 0;
}
static int _put_pass_ep_safe(struct c4iw_dev *dev, struct sk_buff *skb)
{
struct c4iw_ep *ep;
ep = *((struct c4iw_ep **)(skb->cb + 2 * sizeof(void *)));
c4iw_put_ep(&ep->parent_ep->com);
release_ep_resources(ep);
kfree_skb(skb);
return 0;
}
/*
* Fake up a special CPL opcode and call sched() so process_work() will call
* _put_ep_safe() in a safe context to free the ep resources. This is needed
* because ARP error handlers are called in an ATOMIC context, and
* _c4iw_free_ep() needs to block.
*/
static void queue_arp_failure_cpl(struct c4iw_ep *ep, struct sk_buff *skb,
int cpl)
{
struct cpl_act_establish *rpl = cplhdr(skb);
/* Set our special ARP_FAILURE opcode */
rpl->ot.opcode = cpl;
/*
* Save ep in the skb->cb area, after where sched() will save the dev
* ptr.
*/
*((struct c4iw_ep **)(skb->cb + 2 * sizeof(void *))) = ep;
sched(ep->com.dev, skb);
}
/* Handle an ARP failure for an accept */
static void pass_accept_rpl_arp_failure(void *handle, struct sk_buff *skb)
{
struct c4iw_ep *ep = handle;
pr_err("ARP failure during accept - tid %u - dropping connection\n",
ep->hwtid);
__state_set(&ep->com, DEAD);
queue_arp_failure_cpl(ep, skb, FAKE_CPL_PASS_PUT_EP_SAFE);
}
/*
* Handle an ARP failure for an active open.
*/
static void act_open_req_arp_failure(void *handle, struct sk_buff *skb)
{
struct c4iw_ep *ep = handle;
pr_err("ARP failure during connect\n");
connect_reply_upcall(ep, -EHOSTUNREACH);
__state_set(&ep->com, DEAD);
if (ep->com.remote_addr.ss_family == AF_INET6) {
struct sockaddr_in6 *sin6 =
(struct sockaddr_in6 *)&ep->com.local_addr;
cxgb4_clip_release(ep->com.dev->rdev.lldi.ports[0],
(const u32 *)&sin6->sin6_addr.s6_addr, 1);
}
remove_handle(ep->com.dev, &ep->com.dev->atid_idr, ep->atid);
cxgb4_free_atid(ep->com.dev->rdev.lldi.tids, ep->atid);
queue_arp_failure_cpl(ep, skb, FAKE_CPL_PUT_EP_SAFE);
}
/*
* Handle an ARP failure for a CPL_ABORT_REQ. Change it into a no RST variant
* and send it along.
*/
static void abort_arp_failure(void *handle, struct sk_buff *skb)
{
int ret;
struct c4iw_ep *ep = handle;
struct c4iw_rdev *rdev = &ep->com.dev->rdev;
struct cpl_abort_req *req = cplhdr(skb);
pr_debug("%s rdev %p\n", __func__, rdev);
req->cmd = CPL_ABORT_NO_RST;
skb_get(skb);
ret = c4iw_ofld_send(rdev, skb);
if (ret) {
__state_set(&ep->com, DEAD);
queue_arp_failure_cpl(ep, skb, FAKE_CPL_PUT_EP_SAFE);
} else
kfree_skb(skb);
}
static int send_flowc(struct c4iw_ep *ep)
{
struct fw_flowc_wr *flowc;
struct sk_buff *skb = skb_dequeue(&ep->com.ep_skb_list);
int i;
u16 vlan = ep->l2t->vlan;
int nparams;
if (WARN_ON(!skb))
return -ENOMEM;
if (vlan == CPL_L2T_VLAN_NONE)
nparams = 8;
else
nparams = 9;
flowc = __skb_put(skb, FLOWC_LEN);
flowc->op_to_nparams = cpu_to_be32(FW_WR_OP_V(FW_FLOWC_WR) |
FW_FLOWC_WR_NPARAMS_V(nparams));
flowc->flowid_len16 = cpu_to_be32(FW_WR_LEN16_V(DIV_ROUND_UP(FLOWC_LEN,
16)) | FW_WR_FLOWID_V(ep->hwtid));
flowc->mnemval[0].mnemonic = FW_FLOWC_MNEM_PFNVFN;
flowc->mnemval[0].val = cpu_to_be32(FW_PFVF_CMD_PFN_V
(ep->com.dev->rdev.lldi.pf));
flowc->mnemval[1].mnemonic = FW_FLOWC_MNEM_CH;
flowc->mnemval[1].val = cpu_to_be32(ep->tx_chan);
flowc->mnemval[2].mnemonic = FW_FLOWC_MNEM_PORT;
flowc->mnemval[2].val = cpu_to_be32(ep->tx_chan);
flowc->mnemval[3].mnemonic = FW_FLOWC_MNEM_IQID;
flowc->mnemval[3].val = cpu_to_be32(ep->rss_qid);
flowc->mnemval[4].mnemonic = FW_FLOWC_MNEM_SNDNXT;
flowc->mnemval[4].val = cpu_to_be32(ep->snd_seq);
flowc->mnemval[5].mnemonic = FW_FLOWC_MNEM_RCVNXT;
flowc->mnemval[5].val = cpu_to_be32(ep->rcv_seq);
flowc->mnemval[6].mnemonic = FW_FLOWC_MNEM_SNDBUF;
flowc->mnemval[6].val = cpu_to_be32(ep->snd_win);
flowc->mnemval[7].mnemonic = FW_FLOWC_MNEM_MSS;
flowc->mnemval[7].val = cpu_to_be32(ep->emss);
if (nparams == 9) {
u16 pri;
pri = (vlan & VLAN_PRIO_MASK) >> VLAN_PRIO_SHIFT;
flowc->mnemval[8].mnemonic = FW_FLOWC_MNEM_SCHEDCLASS;
flowc->mnemval[8].val = cpu_to_be32(pri);
} else {
/* Pad WR to 16 byte boundary */
flowc->mnemval[8].mnemonic = 0;
flowc->mnemval[8].val = 0;
}
for (i = 0; i < 9; i++) {
flowc->mnemval[i].r4[0] = 0;
flowc->mnemval[i].r4[1] = 0;
flowc->mnemval[i].r4[2] = 0;
}
set_wr_txq(skb, CPL_PRIORITY_DATA, ep->txq_idx);
return c4iw_ofld_send(&ep->com.dev->rdev, skb);
}
static int send_halfclose(struct c4iw_ep *ep)
{
struct sk_buff *skb = skb_dequeue(&ep->com.ep_skb_list);
u32 wrlen = roundup(sizeof(struct cpl_close_con_req), 16);
pr_debug("%s ep %p tid %u\n", __func__, ep, ep->hwtid);
if (WARN_ON(!skb))
return -ENOMEM;
cxgb_mk_close_con_req(skb, wrlen, ep->hwtid, ep->txq_idx,
NULL, arp_failure_discard);
return c4iw_l2t_send(&ep->com.dev->rdev, skb, ep->l2t);
}
static int send_abort(struct c4iw_ep *ep)
{
u32 wrlen = roundup(sizeof(struct cpl_abort_req), 16);
struct sk_buff *req_skb = skb_dequeue(&ep->com.ep_skb_list);
pr_debug("%s ep %p tid %u\n", __func__, ep, ep->hwtid);
if (WARN_ON(!req_skb))
return -ENOMEM;
cxgb_mk_abort_req(req_skb, wrlen, ep->hwtid, ep->txq_idx,
ep, abort_arp_failure);
return c4iw_l2t_send(&ep->com.dev->rdev, req_skb, ep->l2t);
}
static int send_connect(struct c4iw_ep *ep)
{
struct cpl_act_open_req *req = NULL;
struct cpl_t5_act_open_req *t5req = NULL;
struct cpl_t6_act_open_req *t6req = NULL;
struct cpl_act_open_req6 *req6 = NULL;
struct cpl_t5_act_open_req6 *t5req6 = NULL;
struct cpl_t6_act_open_req6 *t6req6 = NULL;
struct sk_buff *skb;
u64 opt0;
u32 opt2;
unsigned int mtu_idx;
u32 wscale;
int win, sizev4, sizev6, wrlen;
struct sockaddr_in *la = (struct sockaddr_in *)
&ep->com.local_addr;
struct sockaddr_in *ra = (struct sockaddr_in *)
&ep->com.remote_addr;
struct sockaddr_in6 *la6 = (struct sockaddr_in6 *)
&ep->com.local_addr;
struct sockaddr_in6 *ra6 = (struct sockaddr_in6 *)
&ep->com.remote_addr;
int ret;
enum chip_type adapter_type = ep->com.dev->rdev.lldi.adapter_type;
u32 isn = (prandom_u32() & ~7UL) - 1;
struct net_device *netdev;
u64 params;
netdev = ep->com.dev->rdev.lldi.ports[0];
switch (CHELSIO_CHIP_VERSION(adapter_type)) {
case CHELSIO_T4:
sizev4 = sizeof(struct cpl_act_open_req);
sizev6 = sizeof(struct cpl_act_open_req6);
break;
case CHELSIO_T5:
sizev4 = sizeof(struct cpl_t5_act_open_req);
sizev6 = sizeof(struct cpl_t5_act_open_req6);
break;
case CHELSIO_T6:
sizev4 = sizeof(struct cpl_t6_act_open_req);
sizev6 = sizeof(struct cpl_t6_act_open_req6);
break;
default:
pr_err("T%d Chip is not supported\n",
CHELSIO_CHIP_VERSION(adapter_type));
return -EINVAL;
}
wrlen = (ep->com.remote_addr.ss_family == AF_INET) ?
roundup(sizev4, 16) :
roundup(sizev6, 16);
pr_debug("%s ep %p atid %u\n", __func__, ep, ep->atid);
skb = get_skb(NULL, wrlen, GFP_KERNEL);
if (!skb) {
pr_err("%s - failed to alloc skb\n", __func__);
return -ENOMEM;
}
set_wr_txq(skb, CPL_PRIORITY_SETUP, ep->ctrlq_idx);
cxgb_best_mtu(ep->com.dev->rdev.lldi.mtus, ep->mtu, &mtu_idx,
enable_tcp_timestamps,
(ep->com.remote_addr.ss_family == AF_INET) ? 0 : 1);
wscale = cxgb_compute_wscale(rcv_win);
/*
* Specify the largest window that will fit in opt0. The
* remainder will be specified in the rx_data_ack.
*/
win = ep->rcv_win >> 10;
if (win > RCV_BUFSIZ_M)
win = RCV_BUFSIZ_M;
opt0 = (nocong ? NO_CONG_F : 0) |
KEEP_ALIVE_F |
DELACK_F |
WND_SCALE_V(wscale) |
MSS_IDX_V(mtu_idx) |
L2T_IDX_V(ep->l2t->idx) |
TX_CHAN_V(ep->tx_chan) |
SMAC_SEL_V(ep->smac_idx) |
DSCP_V(ep->tos >> 2) |
ULP_MODE_V(ULP_MODE_TCPDDP) |
RCV_BUFSIZ_V(win);
opt2 = RX_CHANNEL_V(0) |
CCTRL_ECN_V(enable_ecn) |
RSS_QUEUE_VALID_F | RSS_QUEUE_V(ep->rss_qid);
if (enable_tcp_timestamps)
opt2 |= TSTAMPS_EN_F;
if (enable_tcp_sack)
opt2 |= SACK_EN_F;
if (wscale && enable_tcp_window_scaling)
opt2 |= WND_SCALE_EN_F;
if (CHELSIO_CHIP_VERSION(adapter_type) > CHELSIO_T4) {
if (peer2peer)
isn += 4;
opt2 |= T5_OPT_2_VALID_F;
opt2 |= CONG_CNTRL_V(CONG_ALG_TAHOE);
opt2 |= T5_ISS_F;
}
params = cxgb4_select_ntuple(netdev, ep->l2t);
if (ep->com.remote_addr.ss_family == AF_INET6)
cxgb4_clip_get(ep->com.dev->rdev.lldi.ports[0],
(const u32 *)&la6->sin6_addr.s6_addr, 1);
t4_set_arp_err_handler(skb, ep, act_open_req_arp_failure);
if (ep->com.remote_addr.ss_family == AF_INET) {
switch (CHELSIO_CHIP_VERSION(adapter_type)) {
case CHELSIO_T4:
req = skb_put(skb, wrlen);
INIT_TP_WR(req, 0);
break;
case CHELSIO_T5:
t5req = skb_put(skb, wrlen);
INIT_TP_WR(t5req, 0);
req = (struct cpl_act_open_req *)t5req;
break;
case CHELSIO_T6:
t6req = skb_put(skb, wrlen);
INIT_TP_WR(t6req, 0);
req = (struct cpl_act_open_req *)t6req;
t5req = (struct cpl_t5_act_open_req *)t6req;
break;
default:
pr_err("T%d Chip is not supported\n",
CHELSIO_CHIP_VERSION(adapter_type));
ret = -EINVAL;
goto clip_release;
}
OPCODE_TID(req) = cpu_to_be32(MK_OPCODE_TID(CPL_ACT_OPEN_REQ,
((ep->rss_qid<<14) | ep->atid)));
req->local_port = la->sin_port;
req->peer_port = ra->sin_port;
req->local_ip = la->sin_addr.s_addr;
req->peer_ip = ra->sin_addr.s_addr;
req->opt0 = cpu_to_be64(opt0);
if (is_t4(ep->com.dev->rdev.lldi.adapter_type)) {
req->params = cpu_to_be32(params);
req->opt2 = cpu_to_be32(opt2);
} else {
if (is_t5(ep->com.dev->rdev.lldi.adapter_type)) {
t5req->params =
cpu_to_be64(FILTER_TUPLE_V(params));
t5req->rsvd = cpu_to_be32(isn);
pr_debug("%s snd_isn %u\n", __func__, t5req->rsvd);
t5req->opt2 = cpu_to_be32(opt2);
} else {
t6req->params =
cpu_to_be64(FILTER_TUPLE_V(params));
t6req->rsvd = cpu_to_be32(isn);
pr_debug("%s snd_isn %u\n", __func__, t6req->rsvd);
t6req->opt2 = cpu_to_be32(opt2);
}
}
} else {
switch (CHELSIO_CHIP_VERSION(adapter_type)) {
case CHELSIO_T4:
req6 = skb_put(skb, wrlen);
INIT_TP_WR(req6, 0);
break;
case CHELSIO_T5:
t5req6 = skb_put(skb, wrlen);
INIT_TP_WR(t5req6, 0);
req6 = (struct cpl_act_open_req6 *)t5req6;
break;
case CHELSIO_T6:
t6req6 = skb_put(skb, wrlen);
INIT_TP_WR(t6req6, 0);
req6 = (struct cpl_act_open_req6 *)t6req6;
t5req6 = (struct cpl_t5_act_open_req6 *)t6req6;
break;
default:
pr_err("T%d Chip is not supported\n",
CHELSIO_CHIP_VERSION(adapter_type));
ret = -EINVAL;
goto clip_release;
}
OPCODE_TID(req6) = cpu_to_be32(MK_OPCODE_TID(CPL_ACT_OPEN_REQ6,
((ep->rss_qid<<14)|ep->atid)));
req6->local_port = la6->sin6_port;
req6->peer_port = ra6->sin6_port;
req6->local_ip_hi = *((__be64 *)(la6->sin6_addr.s6_addr));
req6->local_ip_lo = *((__be64 *)(la6->sin6_addr.s6_addr + 8));
req6->peer_ip_hi = *((__be64 *)(ra6->sin6_addr.s6_addr));
req6->peer_ip_lo = *((__be64 *)(ra6->sin6_addr.s6_addr + 8));
req6->opt0 = cpu_to_be64(opt0);
if (is_t4(ep->com.dev->rdev.lldi.adapter_type)) {
req6->params = cpu_to_be32(cxgb4_select_ntuple(netdev,
ep->l2t));
req6->opt2 = cpu_to_be32(opt2);
} else {
if (is_t5(ep->com.dev->rdev.lldi.adapter_type)) {
t5req6->params =
cpu_to_be64(FILTER_TUPLE_V(params));
t5req6->rsvd = cpu_to_be32(isn);
pr_debug("%s snd_isn %u\n", __func__, t5req6->rsvd);
t5req6->opt2 = cpu_to_be32(opt2);
} else {
t6req6->params =
cpu_to_be64(FILTER_TUPLE_V(params));
t6req6->rsvd = cpu_to_be32(isn);
pr_debug("%s snd_isn %u\n", __func__, t6req6->rsvd);
t6req6->opt2 = cpu_to_be32(opt2);
}
}
}
set_bit(ACT_OPEN_REQ, &ep->com.history);
ret = c4iw_l2t_send(&ep->com.dev->rdev, skb, ep->l2t);
clip_release:
if (ret && ep->com.remote_addr.ss_family == AF_INET6)
cxgb4_clip_release(ep->com.dev->rdev.lldi.ports[0],
(const u32 *)&la6->sin6_addr.s6_addr, 1);
return ret;
}
static int send_mpa_req(struct c4iw_ep *ep, struct sk_buff *skb,
u8 mpa_rev_to_use)
{
int mpalen, wrlen, ret;
struct fw_ofld_tx_data_wr *req;
struct mpa_message *mpa;
struct mpa_v2_conn_params mpa_v2_params;
pr_debug("%s ep %p tid %u pd_len %d\n",
__func__, ep, ep->hwtid, ep->plen);
BUG_ON(skb_cloned(skb));
mpalen = sizeof(*mpa) + ep->plen;
if (mpa_rev_to_use == 2)
mpalen += sizeof(struct mpa_v2_conn_params);
wrlen = roundup(mpalen + sizeof *req, 16);
skb = get_skb(skb, wrlen, GFP_KERNEL);
if (!skb) {
connect_reply_upcall(ep, -ENOMEM);
return -ENOMEM;
}
set_wr_txq(skb, CPL_PRIORITY_DATA, ep->txq_idx);
req = skb_put_zero(skb, wrlen);
req->op_to_immdlen = cpu_to_be32(
FW_WR_OP_V(FW_OFLD_TX_DATA_WR) |
FW_WR_COMPL_F |
FW_WR_IMMDLEN_V(mpalen));
req->flowid_len16 = cpu_to_be32(
FW_WR_FLOWID_V(ep->hwtid) |
FW_WR_LEN16_V(wrlen >> 4));
req->plen = cpu_to_be32(mpalen);
req->tunnel_to_proxy = cpu_to_be32(
FW_OFLD_TX_DATA_WR_FLUSH_F |
FW_OFLD_TX_DATA_WR_SHOVE_F);
mpa = (struct mpa_message *)(req + 1);
memcpy(mpa->key, MPA_KEY_REQ, sizeof(mpa->key));
mpa->flags = 0;
if (crc_enabled)
mpa->flags |= MPA_CRC;
if (markers_enabled) {
mpa->flags |= MPA_MARKERS;
ep->mpa_attr.recv_marker_enabled = 1;
} else {
ep->mpa_attr.recv_marker_enabled = 0;
}
if (mpa_rev_to_use == 2)
mpa->flags |= MPA_ENHANCED_RDMA_CONN;
mpa->private_data_size = htons(ep->plen);
mpa->revision = mpa_rev_to_use;
if (mpa_rev_to_use == 1) {
ep->tried_with_mpa_v1 = 1;
ep->retry_with_mpa_v1 = 0;
}
if (mpa_rev_to_use == 2) {
mpa->private_data_size = htons(ntohs(mpa->private_data_size) +
sizeof (struct mpa_v2_conn_params));
pr_debug("%s initiator ird %u ord %u\n", __func__, ep->ird,
ep->ord);
mpa_v2_params.ird = htons((u16)ep->ird);
mpa_v2_params.ord = htons((u16)ep->ord);
if (peer2peer) {
mpa_v2_params.ird |= htons(MPA_V2_PEER2PEER_MODEL);
if (p2p_type == FW_RI_INIT_P2PTYPE_RDMA_WRITE)
mpa_v2_params.ord |=
htons(MPA_V2_RDMA_WRITE_RTR);
else if (p2p_type == FW_RI_INIT_P2PTYPE_READ_REQ)
mpa_v2_params.ord |=
htons(MPA_V2_RDMA_READ_RTR);
}
memcpy(mpa->private_data, &mpa_v2_params,
sizeof(struct mpa_v2_conn_params));
if (ep->plen)
memcpy(mpa->private_data +
sizeof(struct mpa_v2_conn_params),
ep->mpa_pkt + sizeof(*mpa), ep->plen);
} else
if (ep->plen)
memcpy(mpa->private_data,
ep->mpa_pkt + sizeof(*mpa), ep->plen);
/*
* Reference the mpa skb. This ensures the data area
* will remain in memory until the hw acks the tx.
* Function fw4_ack() will deref it.
*/
skb_get(skb);
t4_set_arp_err_handler(skb, NULL, arp_failure_discard);
BUG_ON(ep->mpa_skb);
ep->mpa_skb = skb;
ret = c4iw_l2t_send(&ep->com.dev->rdev, skb, ep->l2t);
if (ret)
return ret;
start_ep_timer(ep);
__state_set(&ep->com, MPA_REQ_SENT);
ep->mpa_attr.initiator = 1;
ep->snd_seq += mpalen;
return ret;
}
static int send_mpa_reject(struct c4iw_ep *ep, const void *pdata, u8 plen)
{
int mpalen, wrlen;
struct fw_ofld_tx_data_wr *req;
struct mpa_message *mpa;
struct sk_buff *skb;
struct mpa_v2_conn_params mpa_v2_params;
pr_debug("%s ep %p tid %u pd_len %d\n",
__func__, ep, ep->hwtid, ep->plen);
mpalen = sizeof(*mpa) + plen;
if (ep->mpa_attr.version == 2 && ep->mpa_attr.enhanced_rdma_conn)
mpalen += sizeof(struct mpa_v2_conn_params);
wrlen = roundup(mpalen + sizeof *req, 16);
skb = get_skb(NULL, wrlen, GFP_KERNEL);
if (!skb) {
pr_err("%s - cannot alloc skb!\n", __func__);
return -ENOMEM;
}
set_wr_txq(skb, CPL_PRIORITY_DATA, ep->txq_idx);
req = skb_put_zero(skb, wrlen);
req->op_to_immdlen = cpu_to_be32(
FW_WR_OP_V(FW_OFLD_TX_DATA_WR) |
FW_WR_COMPL_F |
FW_WR_IMMDLEN_V(mpalen));
req->flowid_len16 = cpu_to_be32(
FW_WR_FLOWID_V(ep->hwtid) |
FW_WR_LEN16_V(wrlen >> 4));
req->plen = cpu_to_be32(mpalen);
req->tunnel_to_proxy = cpu_to_be32(
FW_OFLD_TX_DATA_WR_FLUSH_F |
FW_OFLD_TX_DATA_WR_SHOVE_F);
mpa = (struct mpa_message *)(req + 1);
memset(mpa, 0, sizeof(*mpa));
memcpy(mpa->key, MPA_KEY_REP, sizeof(mpa->key));
mpa->flags = MPA_REJECT;
mpa->revision = ep->mpa_attr.version;
mpa->private_data_size = htons(plen);
if (ep->mpa_attr.version == 2 && ep->mpa_attr.enhanced_rdma_conn) {
mpa->flags |= MPA_ENHANCED_RDMA_CONN;
mpa->private_data_size = htons(ntohs(mpa->private_data_size) +
sizeof (struct mpa_v2_conn_params));
mpa_v2_params.ird = htons(((u16)ep->ird) |
(peer2peer ? MPA_V2_PEER2PEER_MODEL :
0));
mpa_v2_params.ord = htons(((u16)ep->ord) | (peer2peer ?
(p2p_type ==
FW_RI_INIT_P2PTYPE_RDMA_WRITE ?
MPA_V2_RDMA_WRITE_RTR : p2p_type ==
FW_RI_INIT_P2PTYPE_READ_REQ ?
MPA_V2_RDMA_READ_RTR : 0) : 0));
memcpy(mpa->private_data, &mpa_v2_params,
sizeof(struct mpa_v2_conn_params));
if (ep->plen)
memcpy(mpa->private_data +
sizeof(struct mpa_v2_conn_params), pdata, plen);
} else
if (plen)
memcpy(mpa->private_data, pdata, plen);
/*
* Reference the mpa skb again. This ensures the data area
* will remain in memory until the hw acks the tx.
* Function fw4_ack() will deref it.
*/
skb_get(skb);
set_wr_txq(skb, CPL_PRIORITY_DATA, ep->txq_idx);
t4_set_arp_err_handler(skb, NULL, mpa_start_arp_failure);
BUG_ON(ep->mpa_skb);
ep->mpa_skb = skb;
ep->snd_seq += mpalen;
return c4iw_l2t_send(&ep->com.dev->rdev, skb, ep->l2t);
}
static int send_mpa_reply(struct c4iw_ep *ep, const void *pdata, u8 plen)
{
int mpalen, wrlen;
struct fw_ofld_tx_data_wr *req;
struct mpa_message *mpa;
struct sk_buff *skb;
struct mpa_v2_conn_params mpa_v2_params;
pr_debug("%s ep %p tid %u pd_len %d\n",
__func__, ep, ep->hwtid, ep->plen);
mpalen = sizeof(*mpa) + plen;
if (ep->mpa_attr.version == 2 && ep->mpa_attr.enhanced_rdma_conn)
mpalen += sizeof(struct mpa_v2_conn_params);
wrlen = roundup(mpalen + sizeof *req, 16);
skb = get_skb(NULL, wrlen, GFP_KERNEL);
if (!skb) {
pr_err("%s - cannot alloc skb!\n", __func__);
return -ENOMEM;
}
set_wr_txq(skb, CPL_PRIORITY_DATA, ep->txq_idx);
req = skb_put_zero(skb, wrlen);
req->op_to_immdlen = cpu_to_be32(
FW_WR_OP_V(FW_OFLD_TX_DATA_WR) |
FW_WR_COMPL_F |
FW_WR_IMMDLEN_V(mpalen));
req->flowid_len16 = cpu_to_be32(
FW_WR_FLOWID_V(ep->hwtid) |
FW_WR_LEN16_V(wrlen >> 4));
req->plen = cpu_to_be32(mpalen);
req->tunnel_to_proxy = cpu_to_be32(
FW_OFLD_TX_DATA_WR_FLUSH_F |
FW_OFLD_TX_DATA_WR_SHOVE_F);
mpa = (struct mpa_message *)(req + 1);
memset(mpa, 0, sizeof(*mpa));
memcpy(mpa->key, MPA_KEY_REP, sizeof(mpa->key));
mpa->flags = 0;
if (ep->mpa_attr.crc_enabled)
mpa->flags |= MPA_CRC;
if (ep->mpa_attr.recv_marker_enabled)
mpa->flags |= MPA_MARKERS;
mpa->revision = ep->mpa_attr.version;
mpa->private_data_size = htons(plen);
if (ep->mpa_attr.version == 2 && ep->mpa_attr.enhanced_rdma_conn) {
mpa->flags |= MPA_ENHANCED_RDMA_CONN;
mpa->private_data_size = htons(ntohs(mpa->private_data_size) +
sizeof (struct mpa_v2_conn_params));
mpa_v2_params.ird = htons((u16)ep->ird);
mpa_v2_params.ord = htons((u16)ep->ord);
if (peer2peer && (ep->mpa_attr.p2p_type !=
FW_RI_INIT_P2PTYPE_DISABLED)) {
mpa_v2_params.ird |= htons(MPA_V2_PEER2PEER_MODEL);
if (p2p_type == FW_RI_INIT_P2PTYPE_RDMA_WRITE)
mpa_v2_params.ord |=
htons(MPA_V2_RDMA_WRITE_RTR);
else if (p2p_type == FW_RI_INIT_P2PTYPE_READ_REQ)
mpa_v2_params.ord |=
htons(MPA_V2_RDMA_READ_RTR);
}
memcpy(mpa->private_data, &mpa_v2_params,
sizeof(struct mpa_v2_conn_params));
if (ep->plen)
memcpy(mpa->private_data +
sizeof(struct mpa_v2_conn_params), pdata, plen);
} else
if (plen)
memcpy(mpa->private_data, pdata, plen);
/*
* Reference the mpa skb. This ensures the data area
* will remain in memory until the hw acks the tx.
* Function fw4_ack() will deref it.
*/
skb_get(skb);
t4_set_arp_err_handler(skb, NULL, mpa_start_arp_failure);
ep->mpa_skb = skb;
__state_set(&ep->com, MPA_REP_SENT);
ep->snd_seq += mpalen;
return c4iw_l2t_send(&ep->com.dev->rdev, skb, ep->l2t);
}
static int act_establish(struct c4iw_dev *dev, struct sk_buff *skb)
{
struct c4iw_ep *ep;
struct cpl_act_establish *req = cplhdr(skb);
unsigned int tid = GET_TID(req);
unsigned int atid = TID_TID_G(ntohl(req->tos_atid));
struct tid_info *t = dev->rdev.lldi.tids;
int ret;
ep = lookup_atid(t, atid);
pr_debug("%s ep %p tid %u snd_isn %u rcv_isn %u\n", __func__, ep, tid,
be32_to_cpu(req->snd_isn), be32_to_cpu(req->rcv_isn));
mutex_lock(&ep->com.mutex);
dst_confirm(ep->dst);
/* setup the hwtid for this connection */
ep->hwtid = tid;
cxgb4_insert_tid(t, ep, tid, ep->com.local_addr.ss_family);
insert_ep_tid(ep);
ep->snd_seq = be32_to_cpu(req->snd_isn);
ep->rcv_seq = be32_to_cpu(req->rcv_isn);
set_emss(ep, ntohs(req->tcp_opt));
/* dealloc the atid */
remove_handle(ep->com.dev, &ep->com.dev->atid_idr, atid);
cxgb4_free_atid(t, atid);
set_bit(ACT_ESTAB, &ep->com.history);
/* start MPA negotiation */
ret = send_flowc(ep);
if (ret)
goto err;
if (ep->retry_with_mpa_v1)
ret = send_mpa_req(ep, skb, 1);
else
ret = send_mpa_req(ep, skb, mpa_rev);
if (ret)
goto err;
mutex_unlock(&ep->com.mutex);
return 0;
err:
mutex_unlock(&ep->com.mutex);
connect_reply_upcall(ep, -ENOMEM);
c4iw_ep_disconnect(ep, 0, GFP_KERNEL);
return 0;
}
static void close_complete_upcall(struct c4iw_ep *ep, int status)
{
struct iw_cm_event event;
pr_debug("%s ep %p tid %u\n", __func__, ep, ep->hwtid);
memset(&event, 0, sizeof(event));
event.event = IW_CM_EVENT_CLOSE;
event.status = status;
if (ep->com.cm_id) {
pr_debug("close complete delivered ep %p cm_id %p tid %u\n",
ep, ep->com.cm_id, ep->hwtid);
ep->com.cm_id->event_handler(ep->com.cm_id, &event);
deref_cm_id(&ep->com);
set_bit(CLOSE_UPCALL, &ep->com.history);
}
}
static void peer_close_upcall(struct c4iw_ep *ep)
{
struct iw_cm_event event;
pr_debug("%s ep %p tid %u\n", __func__, ep, ep->hwtid);
memset(&event, 0, sizeof(event));
event.event = IW_CM_EVENT_DISCONNECT;
if (ep->com.cm_id) {
pr_debug("peer close delivered ep %p cm_id %p tid %u\n",
ep, ep->com.cm_id, ep->hwtid);
ep->com.cm_id->event_handler(ep->com.cm_id, &event);
set_bit(DISCONN_UPCALL, &ep->com.history);
}
}
static void peer_abort_upcall(struct c4iw_ep *ep)
{
struct iw_cm_event event;
pr_debug("%s ep %p tid %u\n", __func__, ep, ep->hwtid);
memset(&event, 0, sizeof(event));
event.event = IW_CM_EVENT_CLOSE;
event.status = -ECONNRESET;
if (ep->com.cm_id) {
pr_debug("abort delivered ep %p cm_id %p tid %u\n", ep,
ep->com.cm_id, ep->hwtid);
ep->com.cm_id->event_handler(ep->com.cm_id, &event);
deref_cm_id(&ep->com);
set_bit(ABORT_UPCALL, &ep->com.history);
}
}
static void connect_reply_upcall(struct c4iw_ep *ep, int status)
{
struct iw_cm_event event;
pr_debug("%s ep %p tid %u status %d\n",
__func__, ep, ep->hwtid, status);
memset(&event, 0, sizeof(event));
event.event = IW_CM_EVENT_CONNECT_REPLY;
event.status = status;
memcpy(&event.local_addr, &ep->com.local_addr,
sizeof(ep->com.local_addr));
memcpy(&event.remote_addr, &ep->com.remote_addr,
sizeof(ep->com.remote_addr));
if ((status == 0) || (status == -ECONNREFUSED)) {
if (!ep->tried_with_mpa_v1) {
/* this means MPA_v2 is used */
event.ord = ep->ird;
event.ird = ep->ord;
event.private_data_len = ep->plen -
sizeof(struct mpa_v2_conn_params);
event.private_data = ep->mpa_pkt +
sizeof(struct mpa_message) +
sizeof(struct mpa_v2_conn_params);
} else {
/* this means MPA_v1 is used */
event.ord = cur_max_read_depth(ep->com.dev);
event.ird = cur_max_read_depth(ep->com.dev);
event.private_data_len = ep->plen;
event.private_data = ep->mpa_pkt +
sizeof(struct mpa_message);
}
}
pr_debug("%s ep %p tid %u status %d\n", __func__, ep,
ep->hwtid, status);
set_bit(CONN_RPL_UPCALL, &ep->com.history);
ep->com.cm_id->event_handler(ep->com.cm_id, &event);
if (status < 0)
deref_cm_id(&ep->com);
}
static int connect_request_upcall(struct c4iw_ep *ep)
{
struct iw_cm_event event;
int ret;
pr_debug("%s ep %p tid %u\n", __func__, ep, ep->hwtid);
memset(&event, 0, sizeof(event));
event.event = IW_CM_EVENT_CONNECT_REQUEST;
memcpy(&event.local_addr, &ep->com.local_addr,
sizeof(ep->com.local_addr));
memcpy(&event.remote_addr, &ep->com.remote_addr,
sizeof(ep->com.remote_addr));
event.provider_data = ep;
if (!ep->tried_with_mpa_v1) {
/* this means MPA_v2 is used */
event.ord = ep->ord;
event.ird = ep->ird;
event.private_data_len = ep->plen -
sizeof(struct mpa_v2_conn_params);
event.private_data = ep->mpa_pkt + sizeof(struct mpa_message) +
sizeof(struct mpa_v2_conn_params);
} else {
/* this means MPA_v1 is used. Send max supported */
event.ord = cur_max_read_depth(ep->com.dev);
event.ird = cur_max_read_depth(ep->com.dev);
event.private_data_len = ep->plen;
event.private_data = ep->mpa_pkt + sizeof(struct mpa_message);
}
c4iw_get_ep(&ep->com);
ret = ep->parent_ep->com.cm_id->event_handler(ep->parent_ep->com.cm_id,
&event);
if (ret)
c4iw_put_ep(&ep->com);
set_bit(CONNREQ_UPCALL, &ep->com.history);
c4iw_put_ep(&ep->parent_ep->com);
return ret;
}
static void established_upcall(struct c4iw_ep *ep)
{
struct iw_cm_event event;
pr_debug("%s ep %p tid %u\n", __func__, ep, ep->hwtid);
memset(&event, 0, sizeof(event));
event.event = IW_CM_EVENT_ESTABLISHED;
event.ird = ep->ord;
event.ord = ep->ird;
if (ep->com.cm_id) {
pr_debug("%s ep %p tid %u\n", __func__, ep, ep->hwtid);
ep->com.cm_id->event_handler(ep->com.cm_id, &event);
set_bit(ESTAB_UPCALL, &ep->com.history);
}
}
static int update_rx_credits(struct c4iw_ep *ep, u32 credits)
{
struct sk_buff *skb;
u32 wrlen = roundup(sizeof(struct cpl_rx_data_ack), 16);
u32 credit_dack;
pr_debug("%s ep %p tid %u credits %u\n",
__func__, ep, ep->hwtid, credits);
skb = get_skb(NULL, wrlen, GFP_KERNEL);
if (!skb) {
pr_err("update_rx_credits - cannot alloc skb!\n");
return 0;
}
/*
* If we couldn't specify the entire rcv window at connection setup
* due to the limit in the number of bits in the RCV_BUFSIZ field,
* then add the overage in to the credits returned.
*/
if (ep->rcv_win > RCV_BUFSIZ_M * 1024)
credits += ep->rcv_win - RCV_BUFSIZ_M * 1024;
credit_dack = credits | RX_FORCE_ACK_F | RX_DACK_CHANGE_F |
RX_DACK_MODE_V(dack_mode);
cxgb_mk_rx_data_ack(skb, wrlen, ep->hwtid, ep->ctrlq_idx,
credit_dack);
c4iw_ofld_send(&ep->com.dev->rdev, skb);
return credits;
}
#define RELAXED_IRD_NEGOTIATION 1
/*
* process_mpa_reply - process streaming mode MPA reply
*
* Returns:
*
* 0 upon success indicating a connect request was delivered to the ULP
* or the mpa request is incomplete but valid so far.
*
* 1 if a failure requires the caller to close the connection.
*
* 2 if a failure requires the caller to abort the connection.
*/
static int process_mpa_reply(struct c4iw_ep *ep, struct sk_buff *skb)
{
struct mpa_message *mpa;
struct mpa_v2_conn_params *mpa_v2_params;
u16 plen;
u16 resp_ird, resp_ord;
u8 rtr_mismatch = 0, insuff_ird = 0;
struct c4iw_qp_attributes attrs;
enum c4iw_qp_attr_mask mask;
int err;
int disconnect = 0;
pr_debug("%s ep %p tid %u\n", __func__, ep, ep->hwtid);
/*
* If we get more than the supported amount of private data
* then we must fail this connection.
*/
if (ep->mpa_pkt_len + skb->len > sizeof(ep->mpa_pkt)) {
err = -EINVAL;
goto err_stop_timer;
}
/*
* copy the new data into our accumulation buffer.
*/
skb_copy_from_linear_data(skb, &(ep->mpa_pkt[ep->mpa_pkt_len]),
skb->len);
ep->mpa_pkt_len += skb->len;
/*
* if we don't even have the mpa message, then bail.
*/
if (ep->mpa_pkt_len < sizeof(*mpa))
return 0;
mpa = (struct mpa_message *) ep->mpa_pkt;
/* Validate MPA header. */
if (mpa->revision > mpa_rev) {
pr_err("%s MPA version mismatch. Local = %d, Received = %d\n",
__func__, mpa_rev, mpa->revision);
err = -EPROTO;
goto err_stop_timer;
}
if (memcmp(mpa->key, MPA_KEY_REP, sizeof(mpa->key))) {
err = -EPROTO;
goto err_stop_timer;
}
plen = ntohs(mpa->private_data_size);
/*
* Fail if there's too much private data.
*/
if (plen > MPA_MAX_PRIVATE_DATA) {
err = -EPROTO;
goto err_stop_timer;
}
/*
* If plen does not account for pkt size
*/
if (ep->mpa_pkt_len > (sizeof(*mpa) + plen)) {
err = -EPROTO;
goto err_stop_timer;
}
ep->plen = (u8) plen;
/*
* If we don't have all the pdata yet, then bail.
* We'll continue process when more data arrives.
*/
if (ep->mpa_pkt_len < (sizeof(*mpa) + plen))
return 0;
if (mpa->flags & MPA_REJECT) {
err = -ECONNREFUSED;
goto err_stop_timer;
}
/*
* Stop mpa timer. If it expired, then
* we ignore the MPA reply. process_timeout()
* will abort the connection.
*/
if (stop_ep_timer(ep))
return 0;
/*
* If we get here we have accumulated the entire mpa
* start reply message including private data. And
* the MPA header is valid.
*/
__state_set(&ep->com, FPDU_MODE);
ep->mpa_attr.crc_enabled = (mpa->flags & MPA_CRC) | crc_enabled ? 1 : 0;
ep->mpa_attr.xmit_marker_enabled = mpa->flags & MPA_MARKERS ? 1 : 0;
ep->mpa_attr.version = mpa->revision;
ep->mpa_attr.p2p_type = FW_RI_INIT_P2PTYPE_DISABLED;
if (mpa->revision == 2) {
ep->mpa_attr.enhanced_rdma_conn =
mpa->flags & MPA_ENHANCED_RDMA_CONN ? 1 : 0;
if (ep->mpa_attr.enhanced_rdma_conn) {
mpa_v2_params = (struct mpa_v2_conn_params *)
(ep->mpa_pkt + sizeof(*mpa));
resp_ird = ntohs(mpa_v2_params->ird) &
MPA_V2_IRD_ORD_MASK;
resp_ord = ntohs(mpa_v2_params->ord) &
MPA_V2_IRD_ORD_MASK;
pr_debug("%s responder ird %u ord %u ep ird %u ord %u\n",
__func__,
resp_ird, resp_ord, ep->ird, ep->ord);
/*
* This is a double-check. Ideally, below checks are
* not required since ird/ord stuff has been taken
* care of in c4iw_accept_cr
*/
if (ep->ird < resp_ord) {
if (RELAXED_IRD_NEGOTIATION && resp_ord <=
ep->com.dev->rdev.lldi.max_ordird_qp)
ep->ird = resp_ord;
else
insuff_ird = 1;
} else if (ep->ird > resp_ord) {
ep->ird = resp_ord;
}
if (ep->ord > resp_ird) {
if (RELAXED_IRD_NEGOTIATION)
ep->ord = resp_ird;
else
insuff_ird = 1;
}
if (insuff_ird) {
err = -ENOMEM;
ep->ird = resp_ord;
ep->ord = resp_ird;
}
if (ntohs(mpa_v2_params->ird) &
MPA_V2_PEER2PEER_MODEL) {
if (ntohs(mpa_v2_params->ord) &
MPA_V2_RDMA_WRITE_RTR)
ep->mpa_attr.p2p_type =
FW_RI_INIT_P2PTYPE_RDMA_WRITE;
else if (ntohs(mpa_v2_params->ord) &
MPA_V2_RDMA_READ_RTR)
ep->mpa_attr.p2p_type =
FW_RI_INIT_P2PTYPE_READ_REQ;
}
}
} else if (mpa->revision == 1)
if (peer2peer)
ep->mpa_attr.p2p_type = p2p_type;
pr_debug("%s - crc_enabled=%d, recv_marker_enabled=%d, xmit_marker_enabled=%d, version=%d p2p_type=%d local-p2p_type = %d\n",
__func__, ep->mpa_attr.crc_enabled,
ep->mpa_attr.recv_marker_enabled,
ep->mpa_attr.xmit_marker_enabled, ep->mpa_attr.version,
ep->mpa_attr.p2p_type, p2p_type);
/*
* If responder's RTR does not match with that of initiator, assign
* FW_RI_INIT_P2PTYPE_DISABLED in mpa attributes so that RTR is not
* generated when moving QP to RTS state.
* A TERM message will be sent after QP has moved to RTS state
*/
if ((ep->mpa_attr.version == 2) && peer2peer &&
(ep->mpa_attr.p2p_type != p2p_type)) {
ep->mpa_attr.p2p_type = FW_RI_INIT_P2PTYPE_DISABLED;
rtr_mismatch = 1;
}
attrs.mpa_attr = ep->mpa_attr;
attrs.max_ird = ep->ird;
attrs.max_ord = ep->ord;
attrs.llp_stream_handle = ep;
attrs.next_state = C4IW_QP_STATE_RTS;
mask = C4IW_QP_ATTR_NEXT_STATE |
C4IW_QP_ATTR_LLP_STREAM_HANDLE | C4IW_QP_ATTR_MPA_ATTR |
C4IW_QP_ATTR_MAX_IRD | C4IW_QP_ATTR_MAX_ORD;
/* bind QP and TID with INIT_WR */
err = c4iw_modify_qp(ep->com.qp->rhp,
ep->com.qp, mask, &attrs, 1);
if (err)
goto err;
/*
* If responder's RTR requirement did not match with what initiator
* supports, generate TERM message
*/
if (rtr_mismatch) {
pr_err("%s: RTR mismatch, sending TERM\n", __func__);
attrs.layer_etype = LAYER_MPA | DDP_LLP;
attrs.ecode = MPA_NOMATCH_RTR;
attrs.next_state = C4IW_QP_STATE_TERMINATE;
attrs.send_term = 1;
err = c4iw_modify_qp(ep->com.qp->rhp, ep->com.qp,
C4IW_QP_ATTR_NEXT_STATE, &attrs, 1);
err = -ENOMEM;
disconnect = 1;
goto out;
}
/*
* Generate TERM if initiator IRD is not sufficient for responder
* provided ORD. Currently, we do the same behaviour even when
* responder provided IRD is also not sufficient as regards to
* initiator ORD.
*/
if (insuff_ird) {
pr_err("%s: Insufficient IRD, sending TERM\n", __func__);
attrs.layer_etype = LAYER_MPA | DDP_LLP;
attrs.ecode = MPA_INSUFF_IRD;
attrs.next_state = C4IW_QP_STATE_TERMINATE;
attrs.send_term = 1;
err = c4iw_modify_qp(ep->com.qp->rhp, ep->com.qp,
C4IW_QP_ATTR_NEXT_STATE, &attrs, 1);
err = -ENOMEM;
disconnect = 1;
goto out;
}
goto out;
err_stop_timer:
stop_ep_timer(ep);
err:
disconnect = 2;
out:
connect_reply_upcall(ep, err);
return disconnect;
}
/*
* process_mpa_request - process streaming mode MPA request
*
* Returns:
*
* 0 upon success indicating a connect request was delivered to the ULP
* or the mpa request is incomplete but valid so far.
*
* 1 if a failure requires the caller to close the connection.
*
* 2 if a failure requires the caller to abort the connection.
*/
static int process_mpa_request(struct c4iw_ep *ep, struct sk_buff *skb)
{
struct mpa_message *mpa;
struct mpa_v2_conn_params *mpa_v2_params;
u16 plen;
pr_debug("%s ep %p tid %u\n", __func__, ep, ep->hwtid);
/*
* If we get more than the supported amount of private data
* then we must fail this connection.
*/
if (ep->mpa_pkt_len + skb->len > sizeof(ep->mpa_pkt))
goto err_stop_timer;
pr_debug("%s enter (%s line %u)\n", __func__, __FILE__, __LINE__);
/*
* Copy the new data into our accumulation buffer.
*/
skb_copy_from_linear_data(skb, &(ep->mpa_pkt[ep->mpa_pkt_len]),
skb->len);
ep->mpa_pkt_len += skb->len;
/*
* If we don't even have the mpa message, then bail.
* We'll continue process when more data arrives.
*/
if (ep->mpa_pkt_len < sizeof(*mpa))
return 0;
pr_debug("%s enter (%s line %u)\n", __func__, __FILE__, __LINE__);
mpa = (struct mpa_message *) ep->mpa_pkt;
/*
* Validate MPA Header.
*/
if (mpa->revision > mpa_rev) {
pr_err("%s MPA version mismatch. Local = %d, Received = %d\n",
__func__, mpa_rev, mpa->revision);
goto err_stop_timer;
}
if (memcmp(mpa->key, MPA_KEY_REQ, sizeof(mpa->key)))
goto err_stop_timer;
plen = ntohs(mpa->private_data_size);
/*
* Fail if there's too much private data.
*/
if (plen > MPA_MAX_PRIVATE_DATA)
goto err_stop_timer;
/*
* If plen does not account for pkt size
*/
if (ep->mpa_pkt_len > (sizeof(*mpa) + plen))
goto err_stop_timer;
ep->plen = (u8) plen;
/*
* If we don't have all the pdata yet, then bail.
*/
if (ep->mpa_pkt_len < (sizeof(*mpa) + plen))
return 0;
/*
* If we get here we have accumulated the entire mpa
* start reply message including private data.
*/
ep->mpa_attr.initiator = 0;
ep->mpa_attr.crc_enabled = (mpa->flags & MPA_CRC) | crc_enabled ? 1 : 0;
ep->mpa_attr.recv_marker_enabled = markers_enabled;
ep->mpa_attr.xmit_marker_enabled = mpa->flags & MPA_MARKERS ? 1 : 0;
ep->mpa_attr.version = mpa->revision;
if (mpa->revision == 1)
ep->tried_with_mpa_v1 = 1;
ep->mpa_attr.p2p_type = FW_RI_INIT_P2PTYPE_DISABLED;
if (mpa->revision == 2) {
ep->mpa_attr.enhanced_rdma_conn =
mpa->flags & MPA_ENHANCED_RDMA_CONN ? 1 : 0;
if (ep->mpa_attr.enhanced_rdma_conn) {
mpa_v2_params = (struct mpa_v2_conn_params *)
(ep->mpa_pkt + sizeof(*mpa));
ep->ird = ntohs(mpa_v2_params->ird) &
MPA_V2_IRD_ORD_MASK;
ep->ird = min_t(u32, ep->ird,
cur_max_read_depth(ep->com.dev));
ep->ord = ntohs(mpa_v2_params->ord) &
MPA_V2_IRD_ORD_MASK;
ep->ord = min_t(u32, ep->ord,
cur_max_read_depth(ep->com.dev));
pr_debug("%s initiator ird %u ord %u\n",
__func__, ep->ird, ep->ord);
if (ntohs(mpa_v2_params->ird) & MPA_V2_PEER2PEER_MODEL)
if (peer2peer) {
if (ntohs(mpa_v2_params->ord) &
MPA_V2_RDMA_WRITE_RTR)
ep->mpa_attr.p2p_type =
FW_RI_INIT_P2PTYPE_RDMA_WRITE;
else if (ntohs(mpa_v2_params->ord) &
MPA_V2_RDMA_READ_RTR)
ep->mpa_attr.p2p_type =
FW_RI_INIT_P2PTYPE_READ_REQ;
}
}
} else if (mpa->revision == 1)
if (peer2peer)
ep->mpa_attr.p2p_type = p2p_type;
pr_debug("%s - crc_enabled=%d, recv_marker_enabled=%d, xmit_marker_enabled=%d, version=%d p2p_type=%d\n",
__func__,
ep->mpa_attr.crc_enabled, ep->mpa_attr.recv_marker_enabled,
ep->mpa_attr.xmit_marker_enabled, ep->mpa_attr.version,
ep->mpa_attr.p2p_type);
__state_set(&ep->com, MPA_REQ_RCVD);
/* drive upcall */
mutex_lock_nested(&ep->parent_ep->com.mutex, SINGLE_DEPTH_NESTING);
if (ep->parent_ep->com.state != DEAD) {
if (connect_request_upcall(ep))
goto err_unlock_parent;
} else {
goto err_unlock_parent;
}
mutex_unlock(&ep->parent_ep->com.mutex);
return 0;
err_unlock_parent:
mutex_unlock(&ep->parent_ep->com.mutex);
goto err_out;
err_stop_timer:
(void)stop_ep_timer(ep);
err_out:
return 2;
}
static int rx_data(struct c4iw_dev *dev, struct sk_buff *skb)
{
struct c4iw_ep *ep;
struct cpl_rx_data *hdr = cplhdr(skb);
unsigned int dlen = ntohs(hdr->len);
unsigned int tid = GET_TID(hdr);
__u8 status = hdr->status;
int disconnect = 0;
ep = get_ep_from_tid(dev, tid);
if (!ep)
return 0;
pr_debug("%s ep %p tid %u dlen %u\n", __func__, ep, ep->hwtid, dlen);
skb_pull(skb, sizeof(*hdr));
skb_trim(skb, dlen);
mutex_lock(&ep->com.mutex);
switch (ep->com.state) {
case MPA_REQ_SENT:
update_rx_credits(ep, dlen);
ep->rcv_seq += dlen;
disconnect = process_mpa_reply(ep, skb);
break;
case MPA_REQ_WAIT:
update_rx_credits(ep, dlen);
ep->rcv_seq += dlen;
disconnect = process_mpa_request(ep, skb);
break;
case FPDU_MODE: {
struct c4iw_qp_attributes attrs;
update_rx_credits(ep, dlen);
BUG_ON(!ep->com.qp);
if (status)
pr_err("%s Unexpected streaming data." \
" qpid %u ep %p state %d tid %u status %d\n",
__func__, ep->com.qp->wq.sq.qid, ep,
ep->com.state, ep->hwtid, status);
attrs.next_state = C4IW_QP_STATE_TERMINATE;
c4iw_modify_qp(ep->com.qp->rhp, ep->com.qp,
C4IW_QP_ATTR_NEXT_STATE, &attrs, 1);
disconnect = 1;
break;
}
default:
break;
}
mutex_unlock(&ep->com.mutex);
if (disconnect)
c4iw_ep_disconnect(ep, disconnect == 2, GFP_KERNEL);
c4iw_put_ep(&ep->com);
return 0;
}
static int abort_rpl(struct c4iw_dev *dev, struct sk_buff *skb)
{
struct c4iw_ep *ep;
struct cpl_abort_rpl_rss *rpl = cplhdr(skb);
int release = 0;
unsigned int tid = GET_TID(rpl);
ep = get_ep_from_tid(dev, tid);
if (!ep) {
pr_warn("Abort rpl to freed endpoint\n");
return 0;
}
pr_debug("%s ep %p tid %u\n", __func__, ep, ep->hwtid);
mutex_lock(&ep->com.mutex);
switch (ep->com.state) {
case ABORTING:
c4iw_wake_up(&ep->com.wr_wait, -ECONNRESET);
__state_set(&ep->com, DEAD);
release = 1;
break;
default:
pr_err("%s ep %p state %d\n", __func__, ep, ep->com.state);
break;
}
mutex_unlock(&ep->com.mutex);
if (release)
release_ep_resources(ep);
c4iw_put_ep(&ep->com);
return 0;
}
static int send_fw_act_open_req(struct c4iw_ep *ep, unsigned int atid)
{
struct sk_buff *skb;
struct fw_ofld_connection_wr *req;
unsigned int mtu_idx;
u32 wscale;
struct sockaddr_in *sin;
int win;
skb = get_skb(NULL, sizeof(*req), GFP_KERNEL);
req = __skb_put(skb, sizeof(*req));
memset(req, 0, sizeof(*req));
req->op_compl = htonl(WR_OP_V(FW_OFLD_CONNECTION_WR));
req->len16_pkd = htonl(FW_WR_LEN16_V(DIV_ROUND_UP(sizeof(*req), 16)));
req->le.filter = cpu_to_be32(cxgb4_select_ntuple(
ep->com.dev->rdev.lldi.ports[0],
ep->l2t));
sin = (struct sockaddr_in *)&ep->com.local_addr;
req->le.lport = sin->sin_port;
req->le.u.ipv4.lip = sin->sin_addr.s_addr;
sin = (struct sockaddr_in *)&ep->com.remote_addr;
req->le.pport = sin->sin_port;
req->le.u.ipv4.pip = sin->sin_addr.s_addr;
req->tcb.t_state_to_astid =
htonl(FW_OFLD_CONNECTION_WR_T_STATE_V(TCP_SYN_SENT) |
FW_OFLD_CONNECTION_WR_ASTID_V(atid));
req->tcb.cplrxdataack_cplpassacceptrpl =
htons(FW_OFLD_CONNECTION_WR_CPLRXDATAACK_F);
req->tcb.tx_max = (__force __be32) jiffies;
req->tcb.rcv_adv = htons(1);
cxgb_best_mtu(ep->com.dev->rdev.lldi.mtus, ep->mtu, &mtu_idx,
enable_tcp_timestamps,
(ep->com.remote_addr.ss_family == AF_INET) ? 0 : 1);
wscale = cxgb_compute_wscale(rcv_win);
/*
* Specify the largest window that will fit in opt0. The
* remainder will be specified in the rx_data_ack.
*/
win = ep->rcv_win >> 10;
if (win > RCV_BUFSIZ_M)
win = RCV_BUFSIZ_M;
req->tcb.opt0 = (__force __be64) (TCAM_BYPASS_F |
(nocong ? NO_CONG_F : 0) |
KEEP_ALIVE_F |
DELACK_F |
WND_SCALE_V(wscale) |
MSS_IDX_V(mtu_idx) |
L2T_IDX_V(ep->l2t->idx) |
TX_CHAN_V(ep->tx_chan) |
SMAC_SEL_V(ep->smac_idx) |
DSCP_V(ep->tos >> 2) |
ULP_MODE_V(ULP_MODE_TCPDDP) |
RCV_BUFSIZ_V(win));
req->tcb.opt2 = (__force __be32) (PACE_V(1) |
TX_QUEUE_V(ep->com.dev->rdev.lldi.tx_modq[ep->tx_chan]) |
RX_CHANNEL_V(0) |
CCTRL_ECN_V(enable_ecn) |
RSS_QUEUE_VALID_F | RSS_QUEUE_V(ep->rss_qid));
if (enable_tcp_timestamps)
req->tcb.opt2 |= (__force __be32)TSTAMPS_EN_F;
if (enable_tcp_sack)
req->tcb.opt2 |= (__force __be32)SACK_EN_F;
if (wscale && enable_tcp_window_scaling)
req->tcb.opt2 |= (__force __be32)WND_SCALE_EN_F;
req->tcb.opt0 = cpu_to_be64((__force u64)req->tcb.opt0);
req->tcb.opt2 = cpu_to_be32((__force u32)req->tcb.opt2);
set_wr_txq(skb, CPL_PRIORITY_CONTROL, ep->ctrlq_idx);
set_bit(ACT_OFLD_CONN, &ep->com.history);
return c4iw_l2t_send(&ep->com.dev->rdev, skb, ep->l2t);
}
/*
* Some of the error codes above implicitly indicate that there is no TID
* allocated with the result of an ACT_OPEN. We use this predicate to make
* that explicit.
*/
static inline int act_open_has_tid(int status)
{
return (status != CPL_ERR_TCAM_PARITY &&
status != CPL_ERR_TCAM_MISS &&
status != CPL_ERR_TCAM_FULL &&
status != CPL_ERR_CONN_EXIST_SYNRECV &&
status != CPL_ERR_CONN_EXIST);
}
static char *neg_adv_str(unsigned int status)
{
switch (status) {
case CPL_ERR_RTX_NEG_ADVICE:
return "Retransmit timeout";
case CPL_ERR_PERSIST_NEG_ADVICE:
return "Persist timeout";
case CPL_ERR_KEEPALV_NEG_ADVICE:
return "Keepalive timeout";
default:
return "Unknown";
}
}
static void set_tcp_window(struct c4iw_ep *ep, struct port_info *pi)
{
ep->snd_win = snd_win;
ep->rcv_win = rcv_win;
pr_debug("%s snd_win %d rcv_win %d\n",
__func__, ep->snd_win, ep->rcv_win);
}
#define ACT_OPEN_RETRY_COUNT 2
static int import_ep(struct c4iw_ep *ep, int iptype, __u8 *peer_ip,
struct dst_entry *dst, struct c4iw_dev *cdev,
bool clear_mpa_v1, enum chip_type adapter_type, u8 tos)
{
struct neighbour *n;
int err, step;
struct net_device *pdev;
n = dst_neigh_lookup(dst, peer_ip);
if (!n)
return -ENODEV;
rcu_read_lock();
err = -ENOMEM;
if (n->dev->flags & IFF_LOOPBACK) {
if (iptype == 4)
pdev = ip_dev_find(&init_net, *(__be32 *)peer_ip);
else if (IS_ENABLED(CONFIG_IPV6))
for_each_netdev(&init_net, pdev) {
if (ipv6_chk_addr(&init_net,
(struct in6_addr *)peer_ip,
pdev, 1))
break;
}
else
pdev = NULL;
if (!pdev) {
err = -ENODEV;
goto out;
}
ep->l2t = cxgb4_l2t_get(cdev->rdev.lldi.l2t,
n, pdev, rt_tos2priority(tos));
if (!ep->l2t) {
dev_put(pdev);
goto out;
}
ep->mtu = pdev->mtu;
ep->tx_chan = cxgb4_port_chan(pdev);
ep->smac_idx = cxgb4_tp_smt_idx(adapter_type,
cxgb4_port_viid(pdev));
step = cdev->rdev.lldi.ntxq /
cdev->rdev.lldi.nchan;
ep->txq_idx = cxgb4_port_idx(pdev) * step;
step = cdev->rdev.lldi.nrxq /
cdev->rdev.lldi.nchan;
ep->ctrlq_idx = cxgb4_port_idx(pdev);
ep->rss_qid = cdev->rdev.lldi.rxq_ids[
cxgb4_port_idx(pdev) * step];
set_tcp_window(ep, (struct port_info *)netdev_priv(pdev));
dev_put(pdev);
} else {
pdev = get_real_dev(n->dev);
ep->l2t = cxgb4_l2t_get(cdev->rdev.lldi.l2t,
n, pdev, 0);
if (!ep->l2t)
goto out;
ep->mtu = dst_mtu(dst);
ep->tx_chan = cxgb4_port_chan(pdev);
ep->smac_idx = cxgb4_tp_smt_idx(adapter_type,
cxgb4_port_viid(pdev));
step = cdev->rdev.lldi.ntxq /
cdev->rdev.lldi.nchan;
ep->txq_idx = cxgb4_port_idx(pdev) * step;
ep->ctrlq_idx = cxgb4_port_idx(pdev);
step = cdev->rdev.lldi.nrxq /
cdev->rdev.lldi.nchan;
ep->rss_qid = cdev->rdev.lldi.rxq_ids[
cxgb4_port_idx(pdev) * step];
set_tcp_window(ep, (struct port_info *)netdev_priv(pdev));
if (clear_mpa_v1) {
ep->retry_with_mpa_v1 = 0;
ep->tried_with_mpa_v1 = 0;
}
}
err = 0;
out:
rcu_read_unlock();
neigh_release(n);
return err;
}
static int c4iw_reconnect(struct c4iw_ep *ep)
{
int err = 0;
int size = 0;
struct sockaddr_in *laddr = (struct sockaddr_in *)
&ep->com.cm_id->m_local_addr;
struct sockaddr_in *raddr = (struct sockaddr_in *)
&ep->com.cm_id->m_remote_addr;
struct sockaddr_in6 *laddr6 = (struct sockaddr_in6 *)
&ep->com.cm_id->m_local_addr;
struct sockaddr_in6 *raddr6 = (struct sockaddr_in6 *)
&ep->com.cm_id->m_remote_addr;
int iptype;
__u8 *ra;
pr_debug("%s qp %p cm_id %p\n", __func__, ep->com.qp, ep->com.cm_id);
init_timer(&ep->timer);
RDMA/iw_cxgb4: Always wake up waiter in c4iw_peer_abort_intr() Currently c4iw_peer_abort_intr() does not wake up the waiter if the endpoint state indicates we're using MPAv2 and we're currently trying to connect. This was introduced with commit 7c0a33d61187a ("RDMA/cxgb4: Don't wakeup threads for MPAv2") However, this original fix is flawed because it introduces a race that can cause a deadlock of the iwarp stack. Here is the race: ->local side sets up an active offload connection. ->local side sends MPA_START request. ->peer sends MPA_START response. ->local side ingress cpl thread begins processing the MPA_START response, but before it changes the state from MPA_REQ_SENT to FPDU_MODE: ->peer sends a RST which results in a ABORT_REQ_RSS. This triggers peer_abort_intr() which sees the state in MPA_REQ_SENT and since mpa_rev is 2, it will avoid waking up the endpoint with -ECONNRESET, assuming the stack will re-attempt the connection using MPAv1. ->Meanwhile, the cpl thread moves the state to FPDU_MODE and calls c4iw_modify_rc_qp() which calls rdma_init() which sends a RI_WR/INIT WR to firmware. But since HW sent an abort, FW correctly drops the RI_WR/INIT WR. ->So the cpl thread is stuck waiting for a reply and cannot process the ABORT_REQ_RSS cpl sitting in its input queue. Thus everything comes to a halt because no more ingress cpls are processed by the stack... The correct fix for the issue is to always do the wake up in c4iw_abort_intr() but reinitialize the wait object in c4iw_reconnect(). Fixes: 7c0a33d61187a ("RDMA/cxgb4: Don't wakeup threads for MPAv2") Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-05-06 10:48:09 -06:00
c4iw_init_wr_wait(&ep->com.wr_wait);
/* When MPA revision is different on nodes, the node with MPA_rev=2
* tries to reconnect with MPA_rev 1 for the same EP through
* c4iw_reconnect(), where the same EP is assigned with new tid for
* further connection establishment. As we are using the same EP pointer
* for reconnect, few skbs are used during the previous c4iw_connect(),
* which leaves the EP with inadequate skbs for further
* c4iw_reconnect(), Further causing an assert BUG_ON() due to empty
* skb_list() during peer_abort(). Allocate skbs which is already used.
*/
size = (CN_MAX_CON_BUF - skb_queue_len(&ep->com.ep_skb_list));
if (alloc_ep_skb_list(&ep->com.ep_skb_list, size)) {
err = -ENOMEM;
goto fail1;
}
/*
* Allocate an active TID to initiate a TCP connection.
*/
ep->atid = cxgb4_alloc_atid(ep->com.dev->rdev.lldi.tids, ep);
if (ep->atid == -1) {
pr_err("%s - cannot alloc atid\n", __func__);
err = -ENOMEM;
goto fail2;
}
insert_handle(ep->com.dev, &ep->com.dev->atid_idr, ep, ep->atid);
/* find a route */
if (ep->com.cm_id->m_local_addr.ss_family == AF_INET) {
ep->dst = cxgb_find_route(&ep->com.dev->rdev.lldi, get_real_dev,
laddr->sin_addr.s_addr,
raddr->sin_addr.s_addr,
laddr->sin_port,
raddr->sin_port, ep->com.cm_id->tos);
iptype = 4;
ra = (__u8 *)&raddr->sin_addr;
} else {
ep->dst = cxgb_find_route6(&ep->com.dev->rdev.lldi,
get_real_dev,
laddr6->sin6_addr.s6_addr,
raddr6->sin6_addr.s6_addr,
laddr6->sin6_port,
raddr6->sin6_port, 0,
raddr6->sin6_scope_id);
iptype = 6;
ra = (__u8 *)&raddr6->sin6_addr;
}
if (!ep->dst) {
pr_err("%s - cannot find route\n", __func__);
err = -EHOSTUNREACH;
goto fail3;
}
err = import_ep(ep, iptype, ra, ep->dst, ep->com.dev, false,
ep->com.dev->rdev.lldi.adapter_type,
ep->com.cm_id->tos);
if (err) {
pr_err("%s - cannot alloc l2e\n", __func__);
goto fail4;
}
pr_debug("%s txq_idx %u tx_chan %u smac_idx %u rss_qid %u l2t_idx %u\n",
__func__, ep->txq_idx, ep->tx_chan, ep->smac_idx, ep->rss_qid,
ep->l2t->idx);
state_set(&ep->com, CONNECTING);
ep->tos = ep->com.cm_id->tos;
/* send connect request to rnic */
err = send_connect(ep);
if (!err)
goto out;
cxgb4_l2t_release(ep->l2t);
fail4:
dst_release(ep->dst);
fail3:
remove_handle(ep->com.dev, &ep->com.dev->atid_idr, ep->atid);
cxgb4_free_atid(ep->com.dev->rdev.lldi.tids, ep->atid);
fail2:
/*
* remember to send notification to upper layer.
* We are in here so the upper layer is not aware that this is
* re-connect attempt and so, upper layer is still waiting for
* response of 1st connect request.
*/
connect_reply_upcall(ep, -ECONNRESET);
fail1:
c4iw_put_ep(&ep->com);
out:
return err;
}
static int act_open_rpl(struct c4iw_dev *dev, struct sk_buff *skb)
{
struct c4iw_ep *ep;
struct cpl_act_open_rpl *rpl = cplhdr(skb);
unsigned int atid = TID_TID_G(AOPEN_ATID_G(
ntohl(rpl->atid_status)));
struct tid_info *t = dev->rdev.lldi.tids;
int status = AOPEN_STATUS_G(ntohl(rpl->atid_status));
struct sockaddr_in *la;
struct sockaddr_in *ra;
struct sockaddr_in6 *la6;
struct sockaddr_in6 *ra6;
int ret = 0;
ep = lookup_atid(t, atid);
la = (struct sockaddr_in *)&ep->com.local_addr;
ra = (struct sockaddr_in *)&ep->com.remote_addr;
la6 = (struct sockaddr_in6 *)&ep->com.local_addr;
ra6 = (struct sockaddr_in6 *)&ep->com.remote_addr;
pr_debug("%s ep %p atid %u status %u errno %d\n", __func__, ep, atid,
status, status2errno(status));
if (cxgb_is_neg_adv(status)) {
pr_debug("%s Connection problems for atid %u status %u (%s)\n",
__func__, atid, status, neg_adv_str(status));
ep->stats.connect_neg_adv++;
mutex_lock(&dev->rdev.stats.lock);
dev->rdev.stats.neg_adv++;
mutex_unlock(&dev->rdev.stats.lock);
return 0;
}
set_bit(ACT_OPEN_RPL, &ep->com.history);
/*
* Log interesting failures.
*/
switch (status) {
case CPL_ERR_CONN_RESET:
case CPL_ERR_CONN_TIMEDOUT:
break;
case CPL_ERR_TCAM_FULL:
mutex_lock(&dev->rdev.stats.lock);
dev->rdev.stats.tcam_full++;
mutex_unlock(&dev->rdev.stats.lock);
if (ep->com.local_addr.ss_family == AF_INET &&
dev->rdev.lldi.enable_fw_ofld_conn) {
ret = send_fw_act_open_req(ep, TID_TID_G(AOPEN_ATID_G(
ntohl(rpl->atid_status))));
if (ret)
goto fail;
return 0;
}
break;
case CPL_ERR_CONN_EXIST:
if (ep->retry_count++ < ACT_OPEN_RETRY_COUNT) {
set_bit(ACT_RETRY_INUSE, &ep->com.history);
if (ep->com.remote_addr.ss_family == AF_INET6) {
struct sockaddr_in6 *sin6 =
(struct sockaddr_in6 *)
&ep->com.local_addr;
cxgb4_clip_release(
ep->com.dev->rdev.lldi.ports[0],
(const u32 *)
&sin6->sin6_addr.s6_addr, 1);
}
remove_handle(ep->com.dev, &ep->com.dev->atid_idr,
atid);
cxgb4_free_atid(t, atid);
dst_release(ep->dst);
cxgb4_l2t_release(ep->l2t);
c4iw_reconnect(ep);
return 0;
}
break;
default:
if (ep->com.local_addr.ss_family == AF_INET) {
pr_info("Active open failure - atid %u status %u errno %d %pI4:%u->%pI4:%u\n",
atid, status, status2errno(status),
&la->sin_addr.s_addr, ntohs(la->sin_port),
&ra->sin_addr.s_addr, ntohs(ra->sin_port));
} else {
pr_info("Active open failure - atid %u status %u errno %d %pI6:%u->%pI6:%u\n",
atid, status, status2errno(status),
la6->sin6_addr.s6_addr, ntohs(la6->sin6_port),
ra6->sin6_addr.s6_addr, ntohs(ra6->sin6_port));
}
break;
}
fail:
connect_reply_upcall(ep, status2errno(status));
state_set(&ep->com, DEAD);
if (ep->com.remote_addr.ss_family == AF_INET6) {
struct sockaddr_in6 *sin6 =
(struct sockaddr_in6 *)&ep->com.local_addr;
cxgb4_clip_release(ep->com.dev->rdev.lldi.ports[0],
(const u32 *)&sin6->sin6_addr.s6_addr, 1);
}
if (status && act_open_has_tid(status))
cxgb4_remove_tid(ep->com.dev->rdev.lldi.tids, 0, GET_TID(rpl),
ep->com.local_addr.ss_family);
remove_handle(ep->com.dev, &ep->com.dev->atid_idr, atid);
cxgb4_free_atid(t, atid);
dst_release(ep->dst);
cxgb4_l2t_release(ep->l2t);
c4iw_put_ep(&ep->com);
return 0;
}
static int pass_open_rpl(struct c4iw_dev *dev, struct sk_buff *skb)
{
struct cpl_pass_open_rpl *rpl = cplhdr(skb);
unsigned int stid = GET_TID(rpl);
struct c4iw_listen_ep *ep = get_ep_from_stid(dev, stid);
if (!ep) {
pr_debug("%s stid %d lookup failure!\n", __func__, stid);
goto out;
}
pr_debug("%s ep %p status %d error %d\n", __func__, ep,
rpl->status, status2errno(rpl->status));
c4iw_wake_up(&ep->com.wr_wait, status2errno(rpl->status));
c4iw_put_ep(&ep->com);
out:
return 0;
}
static int close_listsrv_rpl(struct c4iw_dev *dev, struct sk_buff *skb)
{
struct cpl_close_listsvr_rpl *rpl = cplhdr(skb);
unsigned int stid = GET_TID(rpl);
struct c4iw_listen_ep *ep = get_ep_from_stid(dev, stid);
pr_debug("%s ep %p\n", __func__, ep);
c4iw_wake_up(&ep->com.wr_wait, status2errno(rpl->status));
c4iw_put_ep(&ep->com);
return 0;
}
static int accept_cr(struct c4iw_ep *ep, struct sk_buff *skb,
struct cpl_pass_accept_req *req)
{
struct cpl_pass_accept_rpl *rpl;
unsigned int mtu_idx;
u64 opt0;
u32 opt2;
u32 wscale;
struct cpl_t5_pass_accept_rpl *rpl5 = NULL;
int win;
enum chip_type adapter_type = ep->com.dev->rdev.lldi.adapter_type;
pr_debug("%s ep %p tid %u\n", __func__, ep, ep->hwtid);
BUG_ON(skb_cloned(skb));
skb_get(skb);
rpl = cplhdr(skb);
if (!is_t4(adapter_type)) {
skb_trim(skb, roundup(sizeof(*rpl5), 16));
rpl5 = (void *)rpl;
INIT_TP_WR(rpl5, ep->hwtid);
} else {
skb_trim(skb, sizeof(*rpl));
INIT_TP_WR(rpl, ep->hwtid);
}
OPCODE_TID(rpl) = cpu_to_be32(MK_OPCODE_TID(CPL_PASS_ACCEPT_RPL,
ep->hwtid));
cxgb_best_mtu(ep->com.dev->rdev.lldi.mtus, ep->mtu, &mtu_idx,
enable_tcp_timestamps && req->tcpopt.tstamp,
(ep->com.remote_addr.ss_family == AF_INET) ? 0 : 1);
wscale = cxgb_compute_wscale(rcv_win);
/*
* Specify the largest window that will fit in opt0. The
* remainder will be specified in the rx_data_ack.
*/
win = ep->rcv_win >> 10;
if (win > RCV_BUFSIZ_M)
win = RCV_BUFSIZ_M;
opt0 = (nocong ? NO_CONG_F : 0) |
KEEP_ALIVE_F |
DELACK_F |
WND_SCALE_V(wscale) |
MSS_IDX_V(mtu_idx) |
L2T_IDX_V(ep->l2t->idx) |
TX_CHAN_V(ep->tx_chan) |
SMAC_SEL_V(ep->smac_idx) |
DSCP_V(ep->tos >> 2) |
ULP_MODE_V(ULP_MODE_TCPDDP) |
RCV_BUFSIZ_V(win);
opt2 = RX_CHANNEL_V(0) |
RSS_QUEUE_VALID_F | RSS_QUEUE_V(ep->rss_qid);
if (enable_tcp_timestamps && req->tcpopt.tstamp)
opt2 |= TSTAMPS_EN_F;
if (enable_tcp_sack && req->tcpopt.sack)
opt2 |= SACK_EN_F;
if (wscale && enable_tcp_window_scaling)
opt2 |= WND_SCALE_EN_F;
if (enable_ecn) {
const struct tcphdr *tcph;
u32 hlen = ntohl(req->hdr_len);
if (CHELSIO_CHIP_VERSION(adapter_type) <= CHELSIO_T5)
tcph = (const void *)(req + 1) + ETH_HDR_LEN_G(hlen) +
IP_HDR_LEN_G(hlen);
else
tcph = (const void *)(req + 1) +
T6_ETH_HDR_LEN_G(hlen) + T6_IP_HDR_LEN_G(hlen);
if (tcph->ece && tcph->cwr)
opt2 |= CCTRL_ECN_V(1);
}
if (CHELSIO_CHIP_VERSION(adapter_type) > CHELSIO_T4) {
u32 isn = (prandom_u32() & ~7UL) - 1;
opt2 |= T5_OPT_2_VALID_F;
opt2 |= CONG_CNTRL_V(CONG_ALG_TAHOE);
opt2 |= T5_ISS_F;
rpl5 = (void *)rpl;
memset(&rpl5->iss, 0, roundup(sizeof(*rpl5)-sizeof(*rpl), 16));
if (peer2peer)
isn += 4;
rpl5->iss = cpu_to_be32(isn);
pr_debug("%s iss %u\n", __func__, be32_to_cpu(rpl5->iss));
}
rpl->opt0 = cpu_to_be64(opt0);
rpl->opt2 = cpu_to_be32(opt2);
set_wr_txq(skb, CPL_PRIORITY_SETUP, ep->ctrlq_idx);
t4_set_arp_err_handler(skb, ep, pass_accept_rpl_arp_failure);
return c4iw_l2t_send(&ep->com.dev->rdev, skb, ep->l2t);
}
static void reject_cr(struct c4iw_dev *dev, u32 hwtid, struct sk_buff *skb)
{
pr_debug("%s c4iw_dev %p tid %u\n", __func__, dev, hwtid);
BUG_ON(skb_cloned(skb));
skb_trim(skb, sizeof(struct cpl_tid_release));
release_tid(&dev->rdev, hwtid, skb);
return;
}
static int pass_accept_req(struct c4iw_dev *dev, struct sk_buff *skb)
{
struct c4iw_ep *child_ep = NULL, *parent_ep;
struct cpl_pass_accept_req *req = cplhdr(skb);
unsigned int stid = PASS_OPEN_TID_G(ntohl(req->tos_stid));
struct tid_info *t = dev->rdev.lldi.tids;
unsigned int hwtid = GET_TID(req);
struct dst_entry *dst;
__u8 local_ip[16], peer_ip[16];
__be16 local_port, peer_port;
struct sockaddr_in6 *sin6;
int err;
u16 peer_mss = ntohs(req->tcpopt.mss);
int iptype;
unsigned short hdrs;
u8 tos = PASS_OPEN_TOS_G(ntohl(req->tos_stid));
parent_ep = (struct c4iw_ep *)get_ep_from_stid(dev, stid);
if (!parent_ep) {
pr_debug("%s connect request on invalid stid %d\n",
__func__, stid);
goto reject;
}
if (state_read(&parent_ep->com) != LISTEN) {
pr_debug("%s - listening ep not in LISTEN\n", __func__);
goto reject;
}
cxgb_get_4tuple(req, parent_ep->com.dev->rdev.lldi.adapter_type,
&iptype, local_ip, peer_ip, &local_port, &peer_port);
/* Find output route */
if (iptype == 4) {
pr_debug("%s parent ep %p hwtid %u laddr %pI4 raddr %pI4 lport %d rport %d peer_mss %d\n"
, __func__, parent_ep, hwtid,
local_ip, peer_ip, ntohs(local_port),
ntohs(peer_port), peer_mss);
dst = cxgb_find_route(&dev->rdev.lldi, get_real_dev,
*(__be32 *)local_ip, *(__be32 *)peer_ip,
local_port, peer_port, tos);
} else {
pr_debug("%s parent ep %p hwtid %u laddr %pI6 raddr %pI6 lport %d rport %d peer_mss %d\n"
, __func__, parent_ep, hwtid,
local_ip, peer_ip, ntohs(local_port),
ntohs(peer_port), peer_mss);
dst = cxgb_find_route6(&dev->rdev.lldi, get_real_dev,
local_ip, peer_ip, local_port, peer_port,
PASS_OPEN_TOS_G(ntohl(req->tos_stid)),
((struct sockaddr_in6 *)
&parent_ep->com.local_addr)->sin6_scope_id);
}
if (!dst) {
pr_err("%s - failed to find dst entry!\n", __func__);
goto reject;
}
child_ep = alloc_ep(sizeof(*child_ep), GFP_KERNEL);
if (!child_ep) {
pr_err("%s - failed to allocate ep entry!\n", __func__);
dst_release(dst);
goto reject;
}
err = import_ep(child_ep, iptype, peer_ip, dst, dev, false,
parent_ep->com.dev->rdev.lldi.adapter_type, tos);
if (err) {
pr_err("%s - failed to allocate l2t entry!\n", __func__);
dst_release(dst);
kfree(child_ep);
goto reject;
}
hdrs = ((iptype == 4) ? sizeof(struct iphdr) : sizeof(struct ipv6hdr)) +
sizeof(struct tcphdr) +
((enable_tcp_timestamps && req->tcpopt.tstamp) ? 12 : 0);
if (peer_mss && child_ep->mtu > (peer_mss + hdrs))
child_ep->mtu = peer_mss + hdrs;
skb_queue_head_init(&child_ep->com.ep_skb_list);
if (alloc_ep_skb_list(&child_ep->com.ep_skb_list, CN_MAX_CON_BUF))
goto fail;
state_set(&child_ep->com, CONNECTING);
child_ep->com.dev = dev;
child_ep->com.cm_id = NULL;
if (iptype == 4) {
struct sockaddr_in *sin = (struct sockaddr_in *)
&child_ep->com.local_addr;
sin->sin_family = AF_INET;
sin->sin_port = local_port;
sin->sin_addr.s_addr = *(__be32 *)local_ip;
sin = (struct sockaddr_in *)&child_ep->com.local_addr;
sin->sin_family = AF_INET;
sin->sin_port = ((struct sockaddr_in *)
&parent_ep->com.local_addr)->sin_port;
sin->sin_addr.s_addr = *(__be32 *)local_ip;
sin = (struct sockaddr_in *)&child_ep->com.remote_addr;
sin->sin_family = AF_INET;
sin->sin_port = peer_port;
sin->sin_addr.s_addr = *(__be32 *)peer_ip;
} else {
sin6 = (struct sockaddr_in6 *)&child_ep->com.local_addr;
sin6->sin6_family = PF_INET6;
sin6->sin6_port = local_port;
memcpy(sin6->sin6_addr.s6_addr, local_ip, 16);
sin6 = (struct sockaddr_in6 *)&child_ep->com.local_addr;
sin6->sin6_family = PF_INET6;
sin6->sin6_port = ((struct sockaddr_in6 *)
&parent_ep->com.local_addr)->sin6_port;
memcpy(sin6->sin6_addr.s6_addr, local_ip, 16);
sin6 = (struct sockaddr_in6 *)&child_ep->com.remote_addr;
sin6->sin6_family = PF_INET6;
sin6->sin6_port = peer_port;
memcpy(sin6->sin6_addr.s6_addr, peer_ip, 16);
}
c4iw_get_ep(&parent_ep->com);
child_ep->parent_ep = parent_ep;
child_ep->tos = tos;
child_ep->dst = dst;
child_ep->hwtid = hwtid;
pr_debug("%s tx_chan %u smac_idx %u rss_qid %u\n", __func__,
child_ep->tx_chan, child_ep->smac_idx, child_ep->rss_qid);
init_timer(&child_ep->timer);
cxgb4_insert_tid(t, child_ep, hwtid,
child_ep->com.local_addr.ss_family);
insert_ep_tid(child_ep);
if (accept_cr(child_ep, skb, req)) {
c4iw_put_ep(&parent_ep->com);
release_ep_resources(child_ep);
} else {
set_bit(PASS_ACCEPT_REQ, &child_ep->com.history);
}
if (iptype == 6) {
sin6 = (struct sockaddr_in6 *)&child_ep->com.local_addr;
cxgb4_clip_get(child_ep->com.dev->rdev.lldi.ports[0],
(const u32 *)&sin6->sin6_addr.s6_addr, 1);
}
goto out;
fail:
c4iw_put_ep(&child_ep->com);
reject:
reject_cr(dev, hwtid, skb);
if (parent_ep)
c4iw_put_ep(&parent_ep->com);
out:
return 0;
}
static int pass_establish(struct c4iw_dev *dev, struct sk_buff *skb)
{
struct c4iw_ep *ep;
struct cpl_pass_establish *req = cplhdr(skb);
unsigned int tid = GET_TID(req);
int ret;
ep = get_ep_from_tid(dev, tid);
pr_debug("%s ep %p tid %u\n", __func__, ep, ep->hwtid);
ep->snd_seq = be32_to_cpu(req->snd_isn);
ep->rcv_seq = be32_to_cpu(req->rcv_isn);
pr_debug("%s ep %p hwtid %u tcp_opt 0x%02x\n", __func__, ep, tid,
ntohs(req->tcp_opt));
set_emss(ep, ntohs(req->tcp_opt));
dst_confirm(ep->dst);
mutex_lock(&ep->com.mutex);
ep->com.state = MPA_REQ_WAIT;
start_ep_timer(ep);
set_bit(PASS_ESTAB, &ep->com.history);
ret = send_flowc(ep);
mutex_unlock(&ep->com.mutex);
if (ret)
c4iw_ep_disconnect(ep, 1, GFP_KERNEL);
c4iw_put_ep(&ep->com);
return 0;
}
static int peer_close(struct c4iw_dev *dev, struct sk_buff *skb)
{
struct cpl_peer_close *hdr = cplhdr(skb);
struct c4iw_ep *ep;
struct c4iw_qp_attributes attrs;
int disconnect = 1;
int release = 0;
unsigned int tid = GET_TID(hdr);
int ret;
ep = get_ep_from_tid(dev, tid);
if (!ep)
return 0;
pr_debug("%s ep %p tid %u\n", __func__, ep, ep->hwtid);
dst_confirm(ep->dst);
set_bit(PEER_CLOSE, &ep->com.history);
mutex_lock(&ep->com.mutex);
switch (ep->com.state) {
case MPA_REQ_WAIT:
__state_set(&ep->com, CLOSING);
break;
case MPA_REQ_SENT:
__state_set(&ep->com, CLOSING);
connect_reply_upcall(ep, -ECONNRESET);
break;
case MPA_REQ_RCVD:
/*
* We're gonna mark this puppy DEAD, but keep
* the reference on it until the ULP accepts or
* rejects the CR. Also wake up anyone waiting
* in rdma connection migration (see c4iw_accept_cr()).
*/
__state_set(&ep->com, CLOSING);
pr_debug("waking up ep %p tid %u\n", ep, ep->hwtid);
c4iw_wake_up(&ep->com.wr_wait, -ECONNRESET);
break;
case MPA_REP_SENT:
__state_set(&ep->com, CLOSING);
pr_debug("waking up ep %p tid %u\n", ep, ep->hwtid);
c4iw_wake_up(&ep->com.wr_wait, -ECONNRESET);
break;
case FPDU_MODE:
start_ep_timer(ep);
__state_set(&ep->com, CLOSING);
attrs.next_state = C4IW_QP_STATE_CLOSING;
ret = c4iw_modify_qp(ep->com.qp->rhp, ep->com.qp,
C4IW_QP_ATTR_NEXT_STATE, &attrs, 1);
if (ret != -ECONNRESET) {
peer_close_upcall(ep);
disconnect = 1;
}
break;
case ABORTING:
disconnect = 0;
break;
case CLOSING:
__state_set(&ep->com, MORIBUND);
disconnect = 0;
break;
case MORIBUND:
RDMA/cxgb4: Endpoint timeout fixes 1) timedout endpoint processing can be starved. If there are continual CPL messages flowing into the driver, the endpoint timeout processing can be starved. This condition exposed the other bugs below. Solution: In process_work(), call process_timedout_eps() after each CPL is processed. 2) Connection events can be processed even though the endpoint is on the timeout list. If the endpoint is scheduled for timeout processing, then we must ignore MPA Start Requests and Replies. Solution: Change stop_ep_timer() to return 1 if the ep has already been queued for timeout processing. All the callers of stop_ep_timer() need to check this and act accordingly. There are just a few cases where the caller needs to do something different if stop_ep_timer() returns 1: 1) in process_mpa_reply(), ignore the reply and process_timeout() will abort the connection. 2) in process_mpa_request, ignore the request and process_timeout() will abort the connection. It is ok for callers of stop_ep_timer() to abort the connection since that will leave the state in ABORTING or DEAD, and process_timeout() now ignores timeouts when the ep is in these states. 3) Double insertion on the timeout list. Since the endpoint timers are used for connection setup and teardown, we need to guard against the possibility that an endpoint is already on the timeout list. This is a rare condition and only seen under heavy load and in the presense of the above 2 bugs. Solution: In ep_timeout(), don't queue the endpoint if it is already on the queue. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-09 08:38:25 -06:00
(void)stop_ep_timer(ep);
if (ep->com.cm_id && ep->com.qp) {
attrs.next_state = C4IW_QP_STATE_IDLE;
c4iw_modify_qp(ep->com.qp->rhp, ep->com.qp,
C4IW_QP_ATTR_NEXT_STATE, &attrs, 1);
}
close_complete_upcall(ep, 0);
__state_set(&ep->com, DEAD);
release = 1;
disconnect = 0;
break;
case DEAD:
disconnect = 0;
break;
default:
BUG_ON(1);
}
mutex_unlock(&ep->com.mutex);
if (disconnect)
c4iw_ep_disconnect(ep, 0, GFP_KERNEL);
if (release)
release_ep_resources(ep);
c4iw_put_ep(&ep->com);
return 0;
}
static int peer_abort(struct c4iw_dev *dev, struct sk_buff *skb)
{
struct cpl_abort_req_rss *req = cplhdr(skb);
struct c4iw_ep *ep;
struct sk_buff *rpl_skb;
struct c4iw_qp_attributes attrs;
int ret;
int release = 0;
unsigned int tid = GET_TID(req);
u32 len = roundup(sizeof(struct cpl_abort_rpl), 16);
ep = get_ep_from_tid(dev, tid);
if (!ep)
return 0;
if (cxgb_is_neg_adv(req->status)) {
pr_debug("%s Negative advice on abort- tid %u status %d (%s)\n",
__func__, ep->hwtid, req->status,
neg_adv_str(req->status));
ep->stats.abort_neg_adv++;
mutex_lock(&dev->rdev.stats.lock);
dev->rdev.stats.neg_adv++;
mutex_unlock(&dev->rdev.stats.lock);
goto deref_ep;
}
pr_debug("%s ep %p tid %u state %u\n", __func__, ep, ep->hwtid,
ep->com.state);
set_bit(PEER_ABORT, &ep->com.history);
/*
* Wake up any threads in rdma_init() or rdma_fini().
* However, this is not needed if com state is just
* MPA_REQ_SENT
*/
if (ep->com.state != MPA_REQ_SENT)
c4iw_wake_up(&ep->com.wr_wait, -ECONNRESET);
mutex_lock(&ep->com.mutex);
switch (ep->com.state) {
case CONNECTING:
c4iw_put_ep(&ep->parent_ep->com);
break;
case MPA_REQ_WAIT:
RDMA/cxgb4: Endpoint timeout fixes 1) timedout endpoint processing can be starved. If there are continual CPL messages flowing into the driver, the endpoint timeout processing can be starved. This condition exposed the other bugs below. Solution: In process_work(), call process_timedout_eps() after each CPL is processed. 2) Connection events can be processed even though the endpoint is on the timeout list. If the endpoint is scheduled for timeout processing, then we must ignore MPA Start Requests and Replies. Solution: Change stop_ep_timer() to return 1 if the ep has already been queued for timeout processing. All the callers of stop_ep_timer() need to check this and act accordingly. There are just a few cases where the caller needs to do something different if stop_ep_timer() returns 1: 1) in process_mpa_reply(), ignore the reply and process_timeout() will abort the connection. 2) in process_mpa_request, ignore the request and process_timeout() will abort the connection. It is ok for callers of stop_ep_timer() to abort the connection since that will leave the state in ABORTING or DEAD, and process_timeout() now ignores timeouts when the ep is in these states. 3) Double insertion on the timeout list. Since the endpoint timers are used for connection setup and teardown, we need to guard against the possibility that an endpoint is already on the timeout list. This is a rare condition and only seen under heavy load and in the presense of the above 2 bugs. Solution: In ep_timeout(), don't queue the endpoint if it is already on the queue. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-09 08:38:25 -06:00
(void)stop_ep_timer(ep);
break;
case MPA_REQ_SENT:
RDMA/cxgb4: Endpoint timeout fixes 1) timedout endpoint processing can be starved. If there are continual CPL messages flowing into the driver, the endpoint timeout processing can be starved. This condition exposed the other bugs below. Solution: In process_work(), call process_timedout_eps() after each CPL is processed. 2) Connection events can be processed even though the endpoint is on the timeout list. If the endpoint is scheduled for timeout processing, then we must ignore MPA Start Requests and Replies. Solution: Change stop_ep_timer() to return 1 if the ep has already been queued for timeout processing. All the callers of stop_ep_timer() need to check this and act accordingly. There are just a few cases where the caller needs to do something different if stop_ep_timer() returns 1: 1) in process_mpa_reply(), ignore the reply and process_timeout() will abort the connection. 2) in process_mpa_request, ignore the request and process_timeout() will abort the connection. It is ok for callers of stop_ep_timer() to abort the connection since that will leave the state in ABORTING or DEAD, and process_timeout() now ignores timeouts when the ep is in these states. 3) Double insertion on the timeout list. Since the endpoint timers are used for connection setup and teardown, we need to guard against the possibility that an endpoint is already on the timeout list. This is a rare condition and only seen under heavy load and in the presense of the above 2 bugs. Solution: In ep_timeout(), don't queue the endpoint if it is already on the queue. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-09 08:38:25 -06:00
(void)stop_ep_timer(ep);
if (mpa_rev == 1 || (mpa_rev == 2 && ep->tried_with_mpa_v1))
connect_reply_upcall(ep, -ECONNRESET);
else {
/*
* we just don't send notification upwards because we
* want to retry with mpa_v1 without upper layers even
* knowing it.
*
* do some housekeeping so as to re-initiate the
* connection
*/
pr_debug("%s: mpa_rev=%d. Retrying with mpav1\n",
__func__, mpa_rev);
ep->retry_with_mpa_v1 = 1;
}
break;
case MPA_REP_SENT:
break;
case MPA_REQ_RCVD:
break;
case MORIBUND:
case CLOSING:
stop_ep_timer(ep);
/*FALLTHROUGH*/
case FPDU_MODE:
if (ep->com.cm_id && ep->com.qp) {
attrs.next_state = C4IW_QP_STATE_ERROR;
ret = c4iw_modify_qp(ep->com.qp->rhp,
ep->com.qp, C4IW_QP_ATTR_NEXT_STATE,
&attrs, 1);
if (ret)
pr_err("%s - qp <- error failed!\n", __func__);
}
peer_abort_upcall(ep);
break;
case ABORTING:
break;
case DEAD:
pr_debug("%s PEER_ABORT IN DEAD STATE!!!!\n", __func__);
mutex_unlock(&ep->com.mutex);
goto deref_ep;
default:
BUG_ON(1);
break;
}
dst_confirm(ep->dst);
if (ep->com.state != ABORTING) {
__state_set(&ep->com, DEAD);
/* we don't release if we want to retry with mpa_v1 */
if (!ep->retry_with_mpa_v1)
release = 1;
}
mutex_unlock(&ep->com.mutex);
rpl_skb = skb_dequeue(&ep->com.ep_skb_list);
if (WARN_ON(!rpl_skb)) {
release = 1;
goto out;
}
cxgb_mk_abort_rpl(rpl_skb, len, ep->hwtid, ep->txq_idx);
c4iw_ofld_send(&ep->com.dev->rdev, rpl_skb);
out:
if (release)
release_ep_resources(ep);
else if (ep->retry_with_mpa_v1) {
if (ep->com.remote_addr.ss_family == AF_INET6) {
struct sockaddr_in6 *sin6 =
(struct sockaddr_in6 *)
&ep->com.local_addr;
cxgb4_clip_release(
ep->com.dev->rdev.lldi.ports[0],
(const u32 *)&sin6->sin6_addr.s6_addr,
1);
}
remove_handle(ep->com.dev, &ep->com.dev->hwtid_idr, ep->hwtid);
cxgb4_remove_tid(ep->com.dev->rdev.lldi.tids, 0, ep->hwtid,
ep->com.local_addr.ss_family);
dst_release(ep->dst);
cxgb4_l2t_release(ep->l2t);
c4iw_reconnect(ep);
}
deref_ep:
c4iw_put_ep(&ep->com);
/* Dereferencing ep, referenced in peer_abort_intr() */
c4iw_put_ep(&ep->com);
return 0;
}
static int close_con_rpl(struct c4iw_dev *dev, struct sk_buff *skb)
{
struct c4iw_ep *ep;
struct c4iw_qp_attributes attrs;
struct cpl_close_con_rpl *rpl = cplhdr(skb);
int release = 0;
unsigned int tid = GET_TID(rpl);
ep = get_ep_from_tid(dev, tid);
if (!ep)
return 0;
pr_debug("%s ep %p tid %u\n", __func__, ep, ep->hwtid);
BUG_ON(!ep);
/* The cm_id may be null if we failed to connect */
mutex_lock(&ep->com.mutex);
set_bit(CLOSE_CON_RPL, &ep->com.history);
switch (ep->com.state) {
case CLOSING:
__state_set(&ep->com, MORIBUND);
break;
case MORIBUND:
RDMA/cxgb4: Endpoint timeout fixes 1) timedout endpoint processing can be starved. If there are continual CPL messages flowing into the driver, the endpoint timeout processing can be starved. This condition exposed the other bugs below. Solution: In process_work(), call process_timedout_eps() after each CPL is processed. 2) Connection events can be processed even though the endpoint is on the timeout list. If the endpoint is scheduled for timeout processing, then we must ignore MPA Start Requests and Replies. Solution: Change stop_ep_timer() to return 1 if the ep has already been queued for timeout processing. All the callers of stop_ep_timer() need to check this and act accordingly. There are just a few cases where the caller needs to do something different if stop_ep_timer() returns 1: 1) in process_mpa_reply(), ignore the reply and process_timeout() will abort the connection. 2) in process_mpa_request, ignore the request and process_timeout() will abort the connection. It is ok for callers of stop_ep_timer() to abort the connection since that will leave the state in ABORTING or DEAD, and process_timeout() now ignores timeouts when the ep is in these states. 3) Double insertion on the timeout list. Since the endpoint timers are used for connection setup and teardown, we need to guard against the possibility that an endpoint is already on the timeout list. This is a rare condition and only seen under heavy load and in the presense of the above 2 bugs. Solution: In ep_timeout(), don't queue the endpoint if it is already on the queue. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-09 08:38:25 -06:00
(void)stop_ep_timer(ep);
if ((ep->com.cm_id) && (ep->com.qp)) {
attrs.next_state = C4IW_QP_STATE_IDLE;
c4iw_modify_qp(ep->com.qp->rhp,
ep->com.qp,
C4IW_QP_ATTR_NEXT_STATE,
&attrs, 1);
}
close_complete_upcall(ep, 0);
__state_set(&ep->com, DEAD);
release = 1;
break;
case ABORTING:
case DEAD:
break;
default:
BUG_ON(1);
break;
}
mutex_unlock(&ep->com.mutex);
if (release)
release_ep_resources(ep);
c4iw_put_ep(&ep->com);
return 0;
}
static int terminate(struct c4iw_dev *dev, struct sk_buff *skb)
{
struct cpl_rdma_terminate *rpl = cplhdr(skb);
unsigned int tid = GET_TID(rpl);
struct c4iw_ep *ep;
struct c4iw_qp_attributes attrs;
ep = get_ep_from_tid(dev, tid);
BUG_ON(!ep);
if (ep && ep->com.qp) {
pr_warn("TERM received tid %u qpid %u\n",
tid, ep->com.qp->wq.sq.qid);
attrs.next_state = C4IW_QP_STATE_TERMINATE;
c4iw_modify_qp(ep->com.qp->rhp, ep->com.qp,
C4IW_QP_ATTR_NEXT_STATE, &attrs, 1);
} else
pr_warn("TERM received tid %u no ep/qp\n", tid);
c4iw_put_ep(&ep->com);
return 0;
}
/*
* Upcall from the adapter indicating data has been transmitted.
* For us its just the single MPA request or reply. We can now free
* the skb holding the mpa message.
*/
static int fw4_ack(struct c4iw_dev *dev, struct sk_buff *skb)
{
struct c4iw_ep *ep;
struct cpl_fw4_ack *hdr = cplhdr(skb);
u8 credits = hdr->credits;
unsigned int tid = GET_TID(hdr);
ep = get_ep_from_tid(dev, tid);
if (!ep)
return 0;
pr_debug("%s ep %p tid %u credits %u\n",
__func__, ep, ep->hwtid, credits);
if (credits == 0) {
pr_debug("%s 0 credit ack ep %p tid %u state %u\n",
__func__, ep, ep->hwtid, state_read(&ep->com));
goto out;
}
dst_confirm(ep->dst);
if (ep->mpa_skb) {
pr_debug("%s last streaming msg ack ep %p tid %u state %u initiator %u freeing skb\n",
__func__, ep, ep->hwtid,
state_read(&ep->com), ep->mpa_attr.initiator ? 1 : 0);
mutex_lock(&ep->com.mutex);
kfree_skb(ep->mpa_skb);
ep->mpa_skb = NULL;
if (test_bit(STOP_MPA_TIMER, &ep->com.flags))
stop_ep_timer(ep);
mutex_unlock(&ep->com.mutex);
}
out:
c4iw_put_ep(&ep->com);
return 0;
}
int c4iw_reject_cr(struct iw_cm_id *cm_id, const void *pdata, u8 pdata_len)
{
int abort;
struct c4iw_ep *ep = to_ep(cm_id);
pr_debug("%s ep %p tid %u\n", __func__, ep, ep->hwtid);
mutex_lock(&ep->com.mutex);
if (ep->com.state != MPA_REQ_RCVD) {
mutex_unlock(&ep->com.mutex);
c4iw_put_ep(&ep->com);
return -ECONNRESET;
}
set_bit(ULP_REJECT, &ep->com.history);
if (mpa_rev == 0)
abort = 1;
else
abort = send_mpa_reject(ep, pdata, pdata_len);
mutex_unlock(&ep->com.mutex);
stop_ep_timer(ep);
c4iw_ep_disconnect(ep, abort != 0, GFP_KERNEL);
c4iw_put_ep(&ep->com);
return 0;
}
int c4iw_accept_cr(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param)
{
int err;
struct c4iw_qp_attributes attrs;
enum c4iw_qp_attr_mask mask;
struct c4iw_ep *ep = to_ep(cm_id);
struct c4iw_dev *h = to_c4iw_dev(cm_id->device);
struct c4iw_qp *qp = get_qhp(h, conn_param->qpn);
int abort = 0;
pr_debug("%s ep %p tid %u\n", __func__, ep, ep->hwtid);
mutex_lock(&ep->com.mutex);
if (ep->com.state != MPA_REQ_RCVD) {
err = -ECONNRESET;
goto err_out;
}
BUG_ON(!qp);
set_bit(ULP_ACCEPT, &ep->com.history);
if ((conn_param->ord > cur_max_read_depth(ep->com.dev)) ||
(conn_param->ird > cur_max_read_depth(ep->com.dev))) {
err = -EINVAL;
goto err_abort;
}
if (ep->mpa_attr.version == 2 && ep->mpa_attr.enhanced_rdma_conn) {
if (conn_param->ord > ep->ird) {
if (RELAXED_IRD_NEGOTIATION) {
conn_param->ord = ep->ird;
} else {
ep->ird = conn_param->ird;
ep->ord = conn_param->ord;
send_mpa_reject(ep, conn_param->private_data,
conn_param->private_data_len);
err = -ENOMEM;
goto err_abort;
}
}
if (conn_param->ird < ep->ord) {
if (RELAXED_IRD_NEGOTIATION &&
ep->ord <= h->rdev.lldi.max_ordird_qp) {
conn_param->ird = ep->ord;
} else {
err = -ENOMEM;
goto err_abort;
}
}
}
ep->ird = conn_param->ird;
ep->ord = conn_param->ord;
if (ep->mpa_attr.version == 1) {
if (peer2peer && ep->ird == 0)
ep->ird = 1;
} else {
if (peer2peer &&
(ep->mpa_attr.p2p_type != FW_RI_INIT_P2PTYPE_DISABLED) &&
(p2p_type == FW_RI_INIT_P2PTYPE_READ_REQ) && ep->ird == 0)
ep->ird = 1;
}
pr_debug("%s %d ird %d ord %d\n", __func__, __LINE__, ep->ird, ep->ord);
ep->com.cm_id = cm_id;
ref_cm_id(&ep->com);
ep->com.qp = qp;
ref_qp(ep);
/* bind QP to EP and move to RTS */
attrs.mpa_attr = ep->mpa_attr;
attrs.max_ird = ep->ird;
attrs.max_ord = ep->ord;
attrs.llp_stream_handle = ep;
attrs.next_state = C4IW_QP_STATE_RTS;
/* bind QP and TID with INIT_WR */
mask = C4IW_QP_ATTR_NEXT_STATE |
C4IW_QP_ATTR_LLP_STREAM_HANDLE |
C4IW_QP_ATTR_MPA_ATTR |
C4IW_QP_ATTR_MAX_IRD |
C4IW_QP_ATTR_MAX_ORD;
err = c4iw_modify_qp(ep->com.qp->rhp,
ep->com.qp, mask, &attrs, 1);
if (err)
goto err_deref_cm_id;
set_bit(STOP_MPA_TIMER, &ep->com.flags);
err = send_mpa_reply(ep, conn_param->private_data,
conn_param->private_data_len);
if (err)
goto err_deref_cm_id;
__state_set(&ep->com, FPDU_MODE);
established_upcall(ep);
mutex_unlock(&ep->com.mutex);
c4iw_put_ep(&ep->com);
return 0;
err_deref_cm_id:
deref_cm_id(&ep->com);
err_abort:
abort = 1;
err_out:
mutex_unlock(&ep->com.mutex);
if (abort)
c4iw_ep_disconnect(ep, 1, GFP_KERNEL);
c4iw_put_ep(&ep->com);
return err;
}
static int pick_local_ipaddrs(struct c4iw_dev *dev, struct iw_cm_id *cm_id)
{
struct in_device *ind;
int found = 0;
struct sockaddr_in *laddr = (struct sockaddr_in *)&cm_id->m_local_addr;
struct sockaddr_in *raddr = (struct sockaddr_in *)&cm_id->m_remote_addr;
ind = in_dev_get(dev->rdev.lldi.ports[0]);
if (!ind)
return -EADDRNOTAVAIL;
for_primary_ifa(ind) {
laddr->sin_addr.s_addr = ifa->ifa_address;
raddr->sin_addr.s_addr = ifa->ifa_address;
found = 1;
break;
}
endfor_ifa(ind);
in_dev_put(ind);
return found ? 0 : -EADDRNOTAVAIL;
}
static int get_lladdr(struct net_device *dev, struct in6_addr *addr,
unsigned char banned_flags)
{
struct inet6_dev *idev;
int err = -EADDRNOTAVAIL;
rcu_read_lock();
idev = __in6_dev_get(dev);
if (idev != NULL) {
struct inet6_ifaddr *ifp;
read_lock_bh(&idev->lock);
list_for_each_entry(ifp, &idev->addr_list, if_list) {
if (ifp->scope == IFA_LINK &&
!(ifp->flags & banned_flags)) {
memcpy(addr, &ifp->addr, 16);
err = 0;
break;
}
}
read_unlock_bh(&idev->lock);
}
rcu_read_unlock();
return err;
}
static int pick_local_ip6addrs(struct c4iw_dev *dev, struct iw_cm_id *cm_id)
{
struct in6_addr uninitialized_var(addr);
struct sockaddr_in6 *la6 = (struct sockaddr_in6 *)&cm_id->m_local_addr;
struct sockaddr_in6 *ra6 = (struct sockaddr_in6 *)&cm_id->m_remote_addr;
if (!get_lladdr(dev->rdev.lldi.ports[0], &addr, IFA_F_TENTATIVE)) {
memcpy(la6->sin6_addr.s6_addr, &addr, 16);
memcpy(ra6->sin6_addr.s6_addr, &addr, 16);
return 0;
}
return -EADDRNOTAVAIL;
}
int c4iw_connect(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param)
{
struct c4iw_dev *dev = to_c4iw_dev(cm_id->device);
struct c4iw_ep *ep;
int err = 0;
struct sockaddr_in *laddr;
struct sockaddr_in *raddr;
struct sockaddr_in6 *laddr6;
struct sockaddr_in6 *raddr6;
__u8 *ra;
int iptype;
if ((conn_param->ord > cur_max_read_depth(dev)) ||
(conn_param->ird > cur_max_read_depth(dev))) {
err = -EINVAL;
goto out;
}
ep = alloc_ep(sizeof(*ep), GFP_KERNEL);
if (!ep) {
pr_err("%s - cannot alloc ep\n", __func__);
err = -ENOMEM;
goto out;
}
skb_queue_head_init(&ep->com.ep_skb_list);
if (alloc_ep_skb_list(&ep->com.ep_skb_list, CN_MAX_CON_BUF)) {
err = -ENOMEM;
goto fail1;
}
init_timer(&ep->timer);
ep->plen = conn_param->private_data_len;
if (ep->plen)
memcpy(ep->mpa_pkt + sizeof(struct mpa_message),
conn_param->private_data, ep->plen);
ep->ird = conn_param->ird;
ep->ord = conn_param->ord;
if (peer2peer && ep->ord == 0)
ep->ord = 1;
ep->com.cm_id = cm_id;
ref_cm_id(&ep->com);
ep->com.dev = dev;
ep->com.qp = get_qhp(dev, conn_param->qpn);
if (!ep->com.qp) {
pr_debug("%s qpn 0x%x not found!\n", __func__, conn_param->qpn);
err = -EINVAL;
goto fail2;
}
ref_qp(ep);
pr_debug("%s qpn 0x%x qp %p cm_id %p\n", __func__, conn_param->qpn,
ep->com.qp, cm_id);
/*
* Allocate an active TID to initiate a TCP connection.
*/
ep->atid = cxgb4_alloc_atid(dev->rdev.lldi.tids, ep);
if (ep->atid == -1) {
pr_err("%s - cannot alloc atid\n", __func__);
err = -ENOMEM;
goto fail2;
}
insert_handle(dev, &dev->atid_idr, ep, ep->atid);
memcpy(&ep->com.local_addr, &cm_id->m_local_addr,
sizeof(ep->com.local_addr));
memcpy(&ep->com.remote_addr, &cm_id->m_remote_addr,
sizeof(ep->com.remote_addr));
laddr = (struct sockaddr_in *)&ep->com.local_addr;
raddr = (struct sockaddr_in *)&ep->com.remote_addr;
laddr6 = (struct sockaddr_in6 *)&ep->com.local_addr;
raddr6 = (struct sockaddr_in6 *) &ep->com.remote_addr;
if (cm_id->m_remote_addr.ss_family == AF_INET) {
iptype = 4;
ra = (__u8 *)&raddr->sin_addr;
/*
* Handle loopback requests to INADDR_ANY.
*/
if (raddr->sin_addr.s_addr == htonl(INADDR_ANY)) {
err = pick_local_ipaddrs(dev, cm_id);
if (err)
goto fail2;
}
/* find a route */
pr_debug("%s saddr %pI4 sport 0x%x raddr %pI4 rport 0x%x\n",
__func__, &laddr->sin_addr, ntohs(laddr->sin_port),
ra, ntohs(raddr->sin_port));
ep->dst = cxgb_find_route(&dev->rdev.lldi, get_real_dev,
laddr->sin_addr.s_addr,
raddr->sin_addr.s_addr,
laddr->sin_port,
raddr->sin_port, cm_id->tos);
} else {
iptype = 6;
ra = (__u8 *)&raddr6->sin6_addr;
/*
* Handle loopback requests to INADDR_ANY.
*/
if (ipv6_addr_type(&raddr6->sin6_addr) == IPV6_ADDR_ANY) {
err = pick_local_ip6addrs(dev, cm_id);
if (err)
goto fail2;
}
/* find a route */
pr_debug("%s saddr %pI6 sport 0x%x raddr %pI6 rport 0x%x\n",
__func__, laddr6->sin6_addr.s6_addr,
ntohs(laddr6->sin6_port),
raddr6->sin6_addr.s6_addr, ntohs(raddr6->sin6_port));
ep->dst = cxgb_find_route6(&dev->rdev.lldi, get_real_dev,
laddr6->sin6_addr.s6_addr,
raddr6->sin6_addr.s6_addr,
laddr6->sin6_port,
raddr6->sin6_port, 0,
raddr6->sin6_scope_id);
}
if (!ep->dst) {
pr_err("%s - cannot find route\n", __func__);
err = -EHOSTUNREACH;
goto fail3;
}
err = import_ep(ep, iptype, ra, ep->dst, ep->com.dev, true,
ep->com.dev->rdev.lldi.adapter_type, cm_id->tos);
if (err) {
pr_err("%s - cannot alloc l2e\n", __func__);
goto fail4;
}
pr_debug("%s txq_idx %u tx_chan %u smac_idx %u rss_qid %u l2t_idx %u\n",
__func__, ep->txq_idx, ep->tx_chan, ep->smac_idx, ep->rss_qid,
ep->l2t->idx);
state_set(&ep->com, CONNECTING);
ep->tos = cm_id->tos;
/* send connect request to rnic */
err = send_connect(ep);
if (!err)
goto out;
cxgb4_l2t_release(ep->l2t);
fail4:
dst_release(ep->dst);
fail3:
remove_handle(ep->com.dev, &ep->com.dev->atid_idr, ep->atid);
cxgb4_free_atid(ep->com.dev->rdev.lldi.tids, ep->atid);
fail2:
skb_queue_purge(&ep->com.ep_skb_list);
deref_cm_id(&ep->com);
fail1:
c4iw_put_ep(&ep->com);
out:
return err;
}
static int create_server6(struct c4iw_dev *dev, struct c4iw_listen_ep *ep)
{
int err;
struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *)
&ep->com.local_addr;
if (ipv6_addr_type(&sin6->sin6_addr) != IPV6_ADDR_ANY) {
err = cxgb4_clip_get(ep->com.dev->rdev.lldi.ports[0],
(const u32 *)&sin6->sin6_addr.s6_addr, 1);
if (err)
return err;
}
c4iw_init_wr_wait(&ep->com.wr_wait);
err = cxgb4_create_server6(ep->com.dev->rdev.lldi.ports[0],
ep->stid, &sin6->sin6_addr,
sin6->sin6_port,
ep->com.dev->rdev.lldi.rxq_ids[0]);
if (!err)
err = c4iw_wait_for_reply(&ep->com.dev->rdev,
&ep->com.wr_wait,
0, 0, __func__);
else if (err > 0)
err = net_xmit_errno(err);
if (err) {
cxgb4_clip_release(ep->com.dev->rdev.lldi.ports[0],
(const u32 *)&sin6->sin6_addr.s6_addr, 1);
pr_err("cxgb4_create_server6/filter failed err %d stid %d laddr %pI6 lport %d\n",
err, ep->stid,
sin6->sin6_addr.s6_addr, ntohs(sin6->sin6_port));
}
return err;
}
static int create_server4(struct c4iw_dev *dev, struct c4iw_listen_ep *ep)
{
int err;
struct sockaddr_in *sin = (struct sockaddr_in *)
&ep->com.local_addr;
if (dev->rdev.lldi.enable_fw_ofld_conn) {
do {
err = cxgb4_create_server_filter(
ep->com.dev->rdev.lldi.ports[0], ep->stid,
sin->sin_addr.s_addr, sin->sin_port, 0,
ep->com.dev->rdev.lldi.rxq_ids[0], 0, 0);
if (err == -EBUSY) {
if (c4iw_fatal_error(&ep->com.dev->rdev)) {
err = -EIO;
break;
}
set_current_state(TASK_UNINTERRUPTIBLE);
schedule_timeout(usecs_to_jiffies(100));
}
} while (err == -EBUSY);
} else {
c4iw_init_wr_wait(&ep->com.wr_wait);
err = cxgb4_create_server(ep->com.dev->rdev.lldi.ports[0],
ep->stid, sin->sin_addr.s_addr, sin->sin_port,
0, ep->com.dev->rdev.lldi.rxq_ids[0]);
if (!err)
err = c4iw_wait_for_reply(&ep->com.dev->rdev,
&ep->com.wr_wait,
0, 0, __func__);
else if (err > 0)
err = net_xmit_errno(err);
}
if (err)
pr_err("cxgb4_create_server/filter failed err %d stid %d laddr %pI4 lport %d\n"
, err, ep->stid,
&sin->sin_addr, ntohs(sin->sin_port));
return err;
}
int c4iw_create_listen(struct iw_cm_id *cm_id, int backlog)
{
int err = 0;
struct c4iw_dev *dev = to_c4iw_dev(cm_id->device);
struct c4iw_listen_ep *ep;
might_sleep();
ep = alloc_ep(sizeof(*ep), GFP_KERNEL);
if (!ep) {
pr_err("%s - cannot alloc ep\n", __func__);
err = -ENOMEM;
goto fail1;
}
skb_queue_head_init(&ep->com.ep_skb_list);
pr_debug("%s ep %p\n", __func__, ep);
ep->com.cm_id = cm_id;
ref_cm_id(&ep->com);
ep->com.dev = dev;
ep->backlog = backlog;
memcpy(&ep->com.local_addr, &cm_id->m_local_addr,
sizeof(ep->com.local_addr));
/*
* Allocate a server TID.
*/
if (dev->rdev.lldi.enable_fw_ofld_conn &&
ep->com.local_addr.ss_family == AF_INET)
ep->stid = cxgb4_alloc_sftid(dev->rdev.lldi.tids,
cm_id->m_local_addr.ss_family, ep);
else
ep->stid = cxgb4_alloc_stid(dev->rdev.lldi.tids,
cm_id->m_local_addr.ss_family, ep);
if (ep->stid == -1) {
pr_err("%s - cannot alloc stid\n", __func__);
err = -ENOMEM;
goto fail2;
}
insert_handle(dev, &dev->stid_idr, ep, ep->stid);
memcpy(&ep->com.local_addr, &cm_id->m_local_addr,
sizeof(ep->com.local_addr));
state_set(&ep->com, LISTEN);
if (ep->com.local_addr.ss_family == AF_INET)
err = create_server4(dev, ep);
else
err = create_server6(dev, ep);
if (!err) {
cm_id->provider_data = ep;
goto out;
}
cxgb4_free_stid(ep->com.dev->rdev.lldi.tids, ep->stid,
ep->com.local_addr.ss_family);
fail2:
deref_cm_id(&ep->com);
c4iw_put_ep(&ep->com);
fail1:
out:
return err;
}
int c4iw_destroy_listen(struct iw_cm_id *cm_id)
{
int err;
struct c4iw_listen_ep *ep = to_listen_ep(cm_id);
pr_debug("%s ep %p\n", __func__, ep);
might_sleep();
state_set(&ep->com, DEAD);
if (ep->com.dev->rdev.lldi.enable_fw_ofld_conn &&
ep->com.local_addr.ss_family == AF_INET) {
err = cxgb4_remove_server_filter(
ep->com.dev->rdev.lldi.ports[0], ep->stid,
ep->com.dev->rdev.lldi.rxq_ids[0], 0);
} else {
struct sockaddr_in6 *sin6;
c4iw_init_wr_wait(&ep->com.wr_wait);
err = cxgb4_remove_server(
ep->com.dev->rdev.lldi.ports[0], ep->stid,
ep->com.dev->rdev.lldi.rxq_ids[0], 0);
if (err)
goto done;
err = c4iw_wait_for_reply(&ep->com.dev->rdev, &ep->com.wr_wait,
0, 0, __func__);
sin6 = (struct sockaddr_in6 *)&ep->com.local_addr;
cxgb4_clip_release(ep->com.dev->rdev.lldi.ports[0],
(const u32 *)&sin6->sin6_addr.s6_addr, 1);
}
remove_handle(ep->com.dev, &ep->com.dev->stid_idr, ep->stid);
cxgb4_free_stid(ep->com.dev->rdev.lldi.tids, ep->stid,
ep->com.local_addr.ss_family);
done:
deref_cm_id(&ep->com);
c4iw_put_ep(&ep->com);
return err;
}
int c4iw_ep_disconnect(struct c4iw_ep *ep, int abrupt, gfp_t gfp)
{
int ret = 0;
int close = 0;
int fatal = 0;
struct c4iw_rdev *rdev;
mutex_lock(&ep->com.mutex);
pr_debug("%s ep %p state %s, abrupt %d\n", __func__, ep,
states[ep->com.state], abrupt);
/*
* Ref the ep here in case we have fatal errors causing the
* ep to be released and freed.
*/
c4iw_get_ep(&ep->com);
rdev = &ep->com.dev->rdev;
if (c4iw_fatal_error(rdev)) {
fatal = 1;
close_complete_upcall(ep, -EIO);
ep->com.state = DEAD;
}
switch (ep->com.state) {
case MPA_REQ_WAIT:
case MPA_REQ_SENT:
case MPA_REQ_RCVD:
case MPA_REP_SENT:
case FPDU_MODE:
case CONNECTING:
close = 1;
if (abrupt)
ep->com.state = ABORTING;
else {
ep->com.state = CLOSING;
/*
* if we close before we see the fw4_ack() then we fix
* up the timer state since we're reusing it.
*/
if (ep->mpa_skb &&
test_bit(STOP_MPA_TIMER, &ep->com.flags)) {
clear_bit(STOP_MPA_TIMER, &ep->com.flags);
stop_ep_timer(ep);
}
start_ep_timer(ep);
}
set_bit(CLOSE_SENT, &ep->com.flags);
break;
case CLOSING:
if (!test_and_set_bit(CLOSE_SENT, &ep->com.flags)) {
close = 1;
if (abrupt) {
RDMA/cxgb4: Endpoint timeout fixes 1) timedout endpoint processing can be starved. If there are continual CPL messages flowing into the driver, the endpoint timeout processing can be starved. This condition exposed the other bugs below. Solution: In process_work(), call process_timedout_eps() after each CPL is processed. 2) Connection events can be processed even though the endpoint is on the timeout list. If the endpoint is scheduled for timeout processing, then we must ignore MPA Start Requests and Replies. Solution: Change stop_ep_timer() to return 1 if the ep has already been queued for timeout processing. All the callers of stop_ep_timer() need to check this and act accordingly. There are just a few cases where the caller needs to do something different if stop_ep_timer() returns 1: 1) in process_mpa_reply(), ignore the reply and process_timeout() will abort the connection. 2) in process_mpa_request, ignore the request and process_timeout() will abort the connection. It is ok for callers of stop_ep_timer() to abort the connection since that will leave the state in ABORTING or DEAD, and process_timeout() now ignores timeouts when the ep is in these states. 3) Double insertion on the timeout list. Since the endpoint timers are used for connection setup and teardown, we need to guard against the possibility that an endpoint is already on the timeout list. This is a rare condition and only seen under heavy load and in the presense of the above 2 bugs. Solution: In ep_timeout(), don't queue the endpoint if it is already on the queue. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-09 08:38:25 -06:00
(void)stop_ep_timer(ep);
ep->com.state = ABORTING;
} else
ep->com.state = MORIBUND;
}
break;
case MORIBUND:
case ABORTING:
case DEAD:
pr_debug("%s ignoring disconnect ep %p state %u\n",
__func__, ep, ep->com.state);
break;
default:
BUG();
break;
}
if (close) {
if (abrupt) {
set_bit(EP_DISC_ABORT, &ep->com.history);
close_complete_upcall(ep, -ECONNRESET);
ret = send_abort(ep);
} else {
set_bit(EP_DISC_CLOSE, &ep->com.history);
ret = send_halfclose(ep);
}
if (ret) {
set_bit(EP_DISC_FAIL, &ep->com.history);
if (!abrupt) {
stop_ep_timer(ep);
close_complete_upcall(ep, -EIO);
}
if (ep->com.qp) {
struct c4iw_qp_attributes attrs;
attrs.next_state = C4IW_QP_STATE_ERROR;
ret = c4iw_modify_qp(ep->com.qp->rhp,
ep->com.qp,
C4IW_QP_ATTR_NEXT_STATE,
&attrs, 1);
if (ret)
pr_err("%s - qp <- error failed!\n",
__func__);
}
fatal = 1;
}
}
mutex_unlock(&ep->com.mutex);
c4iw_put_ep(&ep->com);
if (fatal)
release_ep_resources(ep);
return ret;
}
static void active_ofld_conn_reply(struct c4iw_dev *dev, struct sk_buff *skb,
struct cpl_fw6_msg_ofld_connection_wr_rpl *req)
{
struct c4iw_ep *ep;
int atid = be32_to_cpu(req->tid);
ep = (struct c4iw_ep *)lookup_atid(dev->rdev.lldi.tids,
(__force u32) req->tid);
if (!ep)
return;
switch (req->retval) {
case FW_ENOMEM:
set_bit(ACT_RETRY_NOMEM, &ep->com.history);
if (ep->retry_count++ < ACT_OPEN_RETRY_COUNT) {
send_fw_act_open_req(ep, atid);
return;
}
case FW_EADDRINUSE:
set_bit(ACT_RETRY_INUSE, &ep->com.history);
if (ep->retry_count++ < ACT_OPEN_RETRY_COUNT) {
send_fw_act_open_req(ep, atid);
return;
}
break;
default:
pr_info("%s unexpected ofld conn wr retval %d\n",
__func__, req->retval);
break;
}
pr_err("active ofld_connect_wr failure %d atid %d\n",
req->retval, atid);
mutex_lock(&dev->rdev.stats.lock);
dev->rdev.stats.act_ofld_conn_fails++;
mutex_unlock(&dev->rdev.stats.lock);
connect_reply_upcall(ep, status2errno(req->retval));
state_set(&ep->com, DEAD);
if (ep->com.remote_addr.ss_family == AF_INET6) {
struct sockaddr_in6 *sin6 =
(struct sockaddr_in6 *)&ep->com.local_addr;
cxgb4_clip_release(ep->com.dev->rdev.lldi.ports[0],
(const u32 *)&sin6->sin6_addr.s6_addr, 1);
}
remove_handle(dev, &dev->atid_idr, atid);
cxgb4_free_atid(dev->rdev.lldi.tids, atid);
dst_release(ep->dst);
cxgb4_l2t_release(ep->l2t);
c4iw_put_ep(&ep->com);
}
static void passive_ofld_conn_reply(struct c4iw_dev *dev, struct sk_buff *skb,
struct cpl_fw6_msg_ofld_connection_wr_rpl *req)
{
struct sk_buff *rpl_skb;
struct cpl_pass_accept_req *cpl;
int ret;
rpl_skb = (struct sk_buff *)(unsigned long)req->cookie;
BUG_ON(!rpl_skb);
if (req->retval) {
pr_debug("%s passive open failure %d\n", __func__, req->retval);
mutex_lock(&dev->rdev.stats.lock);
dev->rdev.stats.pas_ofld_conn_fails++;
mutex_unlock(&dev->rdev.stats.lock);
kfree_skb(rpl_skb);
} else {
cpl = (struct cpl_pass_accept_req *)cplhdr(rpl_skb);
OPCODE_TID(cpl) = htonl(MK_OPCODE_TID(CPL_PASS_ACCEPT_REQ,
(__force u32) htonl(
(__force u32) req->tid)));
ret = pass_accept_req(dev, rpl_skb);
if (!ret)
kfree_skb(rpl_skb);
}
return;
}
static int deferred_fw6_msg(struct c4iw_dev *dev, struct sk_buff *skb)
{
struct cpl_fw6_msg *rpl = cplhdr(skb);
struct cpl_fw6_msg_ofld_connection_wr_rpl *req;
switch (rpl->type) {
case FW6_TYPE_CQE:
c4iw_ev_dispatch(dev, (struct t4_cqe *)&rpl->data[0]);
break;
case FW6_TYPE_OFLD_CONNECTION_WR_RPL:
req = (struct cpl_fw6_msg_ofld_connection_wr_rpl *)rpl->data;
switch (req->t_state) {
case TCP_SYN_SENT:
active_ofld_conn_reply(dev, skb, req);
break;
case TCP_SYN_RECV:
passive_ofld_conn_reply(dev, skb, req);
break;
default:
pr_err("%s unexpected ofld conn wr state %d\n",
__func__, req->t_state);
break;
}
break;
}
return 0;
}
static void build_cpl_pass_accept_req(struct sk_buff *skb, int stid , u8 tos)
{
__be32 l2info;
__be16 hdr_len, vlantag, len;
u16 eth_hdr_len;
int tcp_hdr_len, ip_hdr_len;
u8 intf;
struct cpl_rx_pkt *cpl = cplhdr(skb);
struct cpl_pass_accept_req *req;
struct tcp_options_received tmp_opt;
struct c4iw_dev *dev;
enum chip_type type;
dev = *((struct c4iw_dev **) (skb->cb + sizeof(void *)));
/* Store values from cpl_rx_pkt in temporary location. */
vlantag = cpl->vlan;
len = cpl->len;
l2info = cpl->l2info;
hdr_len = cpl->hdr_len;
intf = cpl->iff;
__skb_pull(skb, sizeof(*req) + sizeof(struct rss_header));
/*
* We need to parse the TCP options from SYN packet.
* to generate cpl_pass_accept_req.
*/
memset(&tmp_opt, 0, sizeof(tmp_opt));
tcp_clear_options(&tmp_opt);
tcp_parse_options(&init_net, skb, &tmp_opt, 0, NULL);
req = __skb_push(skb, sizeof(*req));
memset(req, 0, sizeof(*req));
req->l2info = cpu_to_be16(SYN_INTF_V(intf) |
SYN_MAC_IDX_V(RX_MACIDX_G(
be32_to_cpu(l2info))) |
SYN_XACT_MATCH_F);
type = dev->rdev.lldi.adapter_type;
tcp_hdr_len = RX_TCPHDR_LEN_G(be16_to_cpu(hdr_len));
ip_hdr_len = RX_IPHDR_LEN_G(be16_to_cpu(hdr_len));
req->hdr_len =
cpu_to_be32(SYN_RX_CHAN_V(RX_CHAN_G(be32_to_cpu(l2info))));
if (CHELSIO_CHIP_VERSION(type) <= CHELSIO_T5) {
eth_hdr_len = is_t4(type) ?
RX_ETHHDR_LEN_G(be32_to_cpu(l2info)) :
RX_T5_ETHHDR_LEN_G(be32_to_cpu(l2info));
req->hdr_len |= cpu_to_be32(TCP_HDR_LEN_V(tcp_hdr_len) |
IP_HDR_LEN_V(ip_hdr_len) |
ETH_HDR_LEN_V(eth_hdr_len));
} else { /* T6 and later */
eth_hdr_len = RX_T6_ETHHDR_LEN_G(be32_to_cpu(l2info));
req->hdr_len |= cpu_to_be32(T6_TCP_HDR_LEN_V(tcp_hdr_len) |
T6_IP_HDR_LEN_V(ip_hdr_len) |
T6_ETH_HDR_LEN_V(eth_hdr_len));
}
req->vlan = vlantag;
req->len = len;
req->tos_stid = cpu_to_be32(PASS_OPEN_TID_V(stid) |
PASS_OPEN_TOS_V(tos));
req->tcpopt.mss = htons(tmp_opt.mss_clamp);
if (tmp_opt.wscale_ok)
req->tcpopt.wsf = tmp_opt.snd_wscale;
req->tcpopt.tstamp = tmp_opt.saw_tstamp;
if (tmp_opt.sack_ok)
req->tcpopt.sack = 1;
OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_PASS_ACCEPT_REQ, 0));
return;
}
static void send_fw_pass_open_req(struct c4iw_dev *dev, struct sk_buff *skb,
__be32 laddr, __be16 lport,
__be32 raddr, __be16 rport,
u32 rcv_isn, u32 filter, u16 window,
u32 rss_qid, u8 port_id)
{
struct sk_buff *req_skb;
struct fw_ofld_connection_wr *req;
struct cpl_pass_accept_req *cpl = cplhdr(skb);
int ret;
req_skb = alloc_skb(sizeof(struct fw_ofld_connection_wr), GFP_KERNEL);
if (!req_skb)
return;
req = __skb_put(req_skb, sizeof(*req));
memset(req, 0, sizeof(*req));
req->op_compl = htonl(WR_OP_V(FW_OFLD_CONNECTION_WR) | FW_WR_COMPL_F);
req->len16_pkd = htonl(FW_WR_LEN16_V(DIV_ROUND_UP(sizeof(*req), 16)));
req->le.version_cpl = htonl(FW_OFLD_CONNECTION_WR_CPL_F);
req->le.filter = (__force __be32) filter;
req->le.lport = lport;
req->le.pport = rport;
req->le.u.ipv4.lip = laddr;
req->le.u.ipv4.pip = raddr;
req->tcb.rcv_nxt = htonl(rcv_isn + 1);
req->tcb.rcv_adv = htons(window);
req->tcb.t_state_to_astid =
htonl(FW_OFLD_CONNECTION_WR_T_STATE_V(TCP_SYN_RECV) |
FW_OFLD_CONNECTION_WR_RCV_SCALE_V(cpl->tcpopt.wsf) |
FW_OFLD_CONNECTION_WR_ASTID_V(
PASS_OPEN_TID_G(ntohl(cpl->tos_stid))));
/*
* We store the qid in opt2 which will be used by the firmware
* to send us the wr response.
*/
req->tcb.opt2 = htonl(RSS_QUEUE_V(rss_qid));
/*
* We initialize the MSS index in TCB to 0xF.
* So that when driver sends cpl_pass_accept_rpl
* TCB picks up the correct value. If this was 0
* TP will ignore any value > 0 for MSS index.
*/
req->tcb.opt0 = cpu_to_be64(MSS_IDX_V(0xF));
req->cookie = (uintptr_t)skb;
set_wr_txq(req_skb, CPL_PRIORITY_CONTROL, port_id);
ret = cxgb4_ofld_send(dev->rdev.lldi.ports[0], req_skb);
if (ret < 0) {
pr_err("%s - cxgb4_ofld_send error %d - dropping\n", __func__,
ret);
kfree_skb(skb);
kfree_skb(req_skb);
}
}
/*
* Handler for CPL_RX_PKT message. Need to handle cpl_rx_pkt
* messages when a filter is being used instead of server to
* redirect a syn packet. When packets hit filter they are redirected
* to the offload queue and driver tries to establish the connection
* using firmware work request.
*/
static int rx_pkt(struct c4iw_dev *dev, struct sk_buff *skb)
{
int stid;
unsigned int filter;
struct ethhdr *eh = NULL;
struct vlan_ethhdr *vlan_eh = NULL;
struct iphdr *iph;
struct tcphdr *tcph;
struct rss_header *rss = (void *)skb->data;
struct cpl_rx_pkt *cpl = (void *)skb->data;
struct cpl_pass_accept_req *req = (void *)(rss + 1);
struct l2t_entry *e;
struct dst_entry *dst;
struct c4iw_ep *lep = NULL;
u16 window;
struct port_info *pi;
struct net_device *pdev;
u16 rss_qid, eth_hdr_len;
int step;
u32 tx_chan;
struct neighbour *neigh;
/* Drop all non-SYN packets */
if (!(cpl->l2info & cpu_to_be32(RXF_SYN_F)))
goto reject;
/*
* Drop all packets which did not hit the filter.
* Unlikely to happen.
*/
if (!(rss->filter_hit && rss->filter_tid))
goto reject;
/*
* Calculate the server tid from filter hit index from cpl_rx_pkt.
*/
stid = (__force int) cpu_to_be32((__force u32) rss->hash_val);
lep = (struct c4iw_ep *)get_ep_from_stid(dev, stid);
if (!lep) {
pr_debug("%s connect request on invalid stid %d\n",
__func__, stid);
goto reject;
}
switch (CHELSIO_CHIP_VERSION(dev->rdev.lldi.adapter_type)) {
case CHELSIO_T4:
eth_hdr_len = RX_ETHHDR_LEN_G(be32_to_cpu(cpl->l2info));
break;
case CHELSIO_T5:
eth_hdr_len = RX_T5_ETHHDR_LEN_G(be32_to_cpu(cpl->l2info));
break;
case CHELSIO_T6:
eth_hdr_len = RX_T6_ETHHDR_LEN_G(be32_to_cpu(cpl->l2info));
break;
default:
pr_err("T%d Chip is not supported\n",
CHELSIO_CHIP_VERSION(dev->rdev.lldi.adapter_type));
goto reject;
}
if (eth_hdr_len == ETH_HLEN) {
eh = (struct ethhdr *)(req + 1);
iph = (struct iphdr *)(eh + 1);
} else {
vlan_eh = (struct vlan_ethhdr *)(req + 1);
iph = (struct iphdr *)(vlan_eh + 1);
skb->vlan_tci = ntohs(cpl->vlan);
}
if (iph->version != 0x4)
goto reject;
tcph = (struct tcphdr *)(iph + 1);
skb_set_network_header(skb, (void *)iph - (void *)rss);
skb_set_transport_header(skb, (void *)tcph - (void *)rss);
skb_get(skb);
pr_debug("%s lip 0x%x lport %u pip 0x%x pport %u tos %d\n", __func__,
ntohl(iph->daddr), ntohs(tcph->dest), ntohl(iph->saddr),
ntohs(tcph->source), iph->tos);
dst = cxgb_find_route(&dev->rdev.lldi, get_real_dev,
iph->daddr, iph->saddr, tcph->dest,
tcph->source, iph->tos);
if (!dst) {
pr_err("%s - failed to find dst entry!\n",
__func__);
goto reject;
}
neigh = dst_neigh_lookup_skb(dst, skb);
if (!neigh) {
pr_err("%s - failed to allocate neigh!\n",
__func__);
goto free_dst;
}
if (neigh->dev->flags & IFF_LOOPBACK) {
pdev = ip_dev_find(&init_net, iph->daddr);
e = cxgb4_l2t_get(dev->rdev.lldi.l2t, neigh,
pdev, 0);
pi = (struct port_info *)netdev_priv(pdev);
tx_chan = cxgb4_port_chan(pdev);
dev_put(pdev);
} else {
pdev = get_real_dev(neigh->dev);
e = cxgb4_l2t_get(dev->rdev.lldi.l2t, neigh,
pdev, 0);
pi = (struct port_info *)netdev_priv(pdev);
tx_chan = cxgb4_port_chan(pdev);
}
neigh_release(neigh);
if (!e) {
pr_err("%s - failed to allocate l2t entry!\n",
__func__);
goto free_dst;
}
step = dev->rdev.lldi.nrxq / dev->rdev.lldi.nchan;
rss_qid = dev->rdev.lldi.rxq_ids[pi->port_id * step];
window = (__force u16) htons((__force u16)tcph->window);
/* Calcuate filter portion for LE region. */
filter = (__force unsigned int) cpu_to_be32(cxgb4_select_ntuple(
dev->rdev.lldi.ports[0],
e));
/*
* Synthesize the cpl_pass_accept_req. We have everything except the
* TID. Once firmware sends a reply with TID we update the TID field
* in cpl and pass it through the regular cpl_pass_accept_req path.
*/
build_cpl_pass_accept_req(skb, stid, iph->tos);
send_fw_pass_open_req(dev, skb, iph->daddr, tcph->dest, iph->saddr,
tcph->source, ntohl(tcph->seq), filter, window,
rss_qid, pi->port_id);
cxgb4_l2t_release(e);
free_dst:
dst_release(dst);
reject:
if (lep)
c4iw_put_ep(&lep->com);
return 0;
}
/*
* These are the real handlers that are called from a
* work queue.
*/
static c4iw_handler_func work_handlers[NUM_CPL_CMDS + NUM_FAKE_CPLS] = {
[CPL_ACT_ESTABLISH] = act_establish,
[CPL_ACT_OPEN_RPL] = act_open_rpl,
[CPL_RX_DATA] = rx_data,
[CPL_ABORT_RPL_RSS] = abort_rpl,
[CPL_ABORT_RPL] = abort_rpl,
[CPL_PASS_OPEN_RPL] = pass_open_rpl,
[CPL_CLOSE_LISTSRV_RPL] = close_listsrv_rpl,
[CPL_PASS_ACCEPT_REQ] = pass_accept_req,
[CPL_PASS_ESTABLISH] = pass_establish,
[CPL_PEER_CLOSE] = peer_close,
[CPL_ABORT_REQ_RSS] = peer_abort,
[CPL_CLOSE_CON_RPL] = close_con_rpl,
[CPL_RDMA_TERMINATE] = terminate,
[CPL_FW4_ACK] = fw4_ack,
[CPL_FW6_MSG] = deferred_fw6_msg,
[CPL_RX_PKT] = rx_pkt,
[FAKE_CPL_PUT_EP_SAFE] = _put_ep_safe,
[FAKE_CPL_PASS_PUT_EP_SAFE] = _put_pass_ep_safe
};
static void process_timeout(struct c4iw_ep *ep)
{
struct c4iw_qp_attributes attrs;
int abort = 1;
mutex_lock(&ep->com.mutex);
pr_debug("%s ep %p tid %u state %d\n", __func__, ep, ep->hwtid,
ep->com.state);
set_bit(TIMEDOUT, &ep->com.history);
switch (ep->com.state) {
case MPA_REQ_SENT:
connect_reply_upcall(ep, -ETIMEDOUT);
break;
case MPA_REQ_WAIT:
case MPA_REQ_RCVD:
case MPA_REP_SENT:
case FPDU_MODE:
break;
case CLOSING:
case MORIBUND:
if (ep->com.cm_id && ep->com.qp) {
attrs.next_state = C4IW_QP_STATE_ERROR;
c4iw_modify_qp(ep->com.qp->rhp,
ep->com.qp, C4IW_QP_ATTR_NEXT_STATE,
&attrs, 1);
}
close_complete_upcall(ep, -ETIMEDOUT);
break;
RDMA/cxgb4: Endpoint timeout fixes 1) timedout endpoint processing can be starved. If there are continual CPL messages flowing into the driver, the endpoint timeout processing can be starved. This condition exposed the other bugs below. Solution: In process_work(), call process_timedout_eps() after each CPL is processed. 2) Connection events can be processed even though the endpoint is on the timeout list. If the endpoint is scheduled for timeout processing, then we must ignore MPA Start Requests and Replies. Solution: Change stop_ep_timer() to return 1 if the ep has already been queued for timeout processing. All the callers of stop_ep_timer() need to check this and act accordingly. There are just a few cases where the caller needs to do something different if stop_ep_timer() returns 1: 1) in process_mpa_reply(), ignore the reply and process_timeout() will abort the connection. 2) in process_mpa_request, ignore the request and process_timeout() will abort the connection. It is ok for callers of stop_ep_timer() to abort the connection since that will leave the state in ABORTING or DEAD, and process_timeout() now ignores timeouts when the ep is in these states. 3) Double insertion on the timeout list. Since the endpoint timers are used for connection setup and teardown, we need to guard against the possibility that an endpoint is already on the timeout list. This is a rare condition and only seen under heavy load and in the presense of the above 2 bugs. Solution: In ep_timeout(), don't queue the endpoint if it is already on the queue. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-09 08:38:25 -06:00
case ABORTING:
case DEAD:
/*
* These states are expected if the ep timed out at the same
* time as another thread was calling stop_ep_timer().
* So we silently do nothing for these states.
*/
abort = 0;
break;
default:
WARN(1, "%s unexpected state ep %p tid %u state %u\n",
__func__, ep, ep->hwtid, ep->com.state);
abort = 0;
}
mutex_unlock(&ep->com.mutex);
if (abort)
c4iw_ep_disconnect(ep, 1, GFP_KERNEL);
c4iw_put_ep(&ep->com);
}
static void process_timedout_eps(void)
{
struct c4iw_ep *ep;
spin_lock_irq(&timeout_lock);
while (!list_empty(&timeout_list)) {
struct list_head *tmp;
tmp = timeout_list.next;
list_del(tmp);
RDMA/cxgb4: Endpoint timeout fixes 1) timedout endpoint processing can be starved. If there are continual CPL messages flowing into the driver, the endpoint timeout processing can be starved. This condition exposed the other bugs below. Solution: In process_work(), call process_timedout_eps() after each CPL is processed. 2) Connection events can be processed even though the endpoint is on the timeout list. If the endpoint is scheduled for timeout processing, then we must ignore MPA Start Requests and Replies. Solution: Change stop_ep_timer() to return 1 if the ep has already been queued for timeout processing. All the callers of stop_ep_timer() need to check this and act accordingly. There are just a few cases where the caller needs to do something different if stop_ep_timer() returns 1: 1) in process_mpa_reply(), ignore the reply and process_timeout() will abort the connection. 2) in process_mpa_request, ignore the request and process_timeout() will abort the connection. It is ok for callers of stop_ep_timer() to abort the connection since that will leave the state in ABORTING or DEAD, and process_timeout() now ignores timeouts when the ep is in these states. 3) Double insertion on the timeout list. Since the endpoint timers are used for connection setup and teardown, we need to guard against the possibility that an endpoint is already on the timeout list. This is a rare condition and only seen under heavy load and in the presense of the above 2 bugs. Solution: In ep_timeout(), don't queue the endpoint if it is already on the queue. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-09 08:38:25 -06:00
tmp->next = NULL;
tmp->prev = NULL;
spin_unlock_irq(&timeout_lock);
ep = list_entry(tmp, struct c4iw_ep, entry);
process_timeout(ep);
spin_lock_irq(&timeout_lock);
}
spin_unlock_irq(&timeout_lock);
}
static void process_work(struct work_struct *work)
{
struct sk_buff *skb = NULL;
struct c4iw_dev *dev;
struct cpl_act_establish *rpl;
unsigned int opcode;
int ret;
RDMA/cxgb4: Endpoint timeout fixes 1) timedout endpoint processing can be starved. If there are continual CPL messages flowing into the driver, the endpoint timeout processing can be starved. This condition exposed the other bugs below. Solution: In process_work(), call process_timedout_eps() after each CPL is processed. 2) Connection events can be processed even though the endpoint is on the timeout list. If the endpoint is scheduled for timeout processing, then we must ignore MPA Start Requests and Replies. Solution: Change stop_ep_timer() to return 1 if the ep has already been queued for timeout processing. All the callers of stop_ep_timer() need to check this and act accordingly. There are just a few cases where the caller needs to do something different if stop_ep_timer() returns 1: 1) in process_mpa_reply(), ignore the reply and process_timeout() will abort the connection. 2) in process_mpa_request, ignore the request and process_timeout() will abort the connection. It is ok for callers of stop_ep_timer() to abort the connection since that will leave the state in ABORTING or DEAD, and process_timeout() now ignores timeouts when the ep is in these states. 3) Double insertion on the timeout list. Since the endpoint timers are used for connection setup and teardown, we need to guard against the possibility that an endpoint is already on the timeout list. This is a rare condition and only seen under heavy load and in the presense of the above 2 bugs. Solution: In ep_timeout(), don't queue the endpoint if it is already on the queue. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-09 08:38:25 -06:00
process_timedout_eps();
while ((skb = skb_dequeue(&rxq))) {
rpl = cplhdr(skb);
dev = *((struct c4iw_dev **) (skb->cb + sizeof(void *)));
opcode = rpl->ot.opcode;
BUG_ON(!work_handlers[opcode]);
ret = work_handlers[opcode](dev, skb);
if (!ret)
kfree_skb(skb);
RDMA/cxgb4: Endpoint timeout fixes 1) timedout endpoint processing can be starved. If there are continual CPL messages flowing into the driver, the endpoint timeout processing can be starved. This condition exposed the other bugs below. Solution: In process_work(), call process_timedout_eps() after each CPL is processed. 2) Connection events can be processed even though the endpoint is on the timeout list. If the endpoint is scheduled for timeout processing, then we must ignore MPA Start Requests and Replies. Solution: Change stop_ep_timer() to return 1 if the ep has already been queued for timeout processing. All the callers of stop_ep_timer() need to check this and act accordingly. There are just a few cases where the caller needs to do something different if stop_ep_timer() returns 1: 1) in process_mpa_reply(), ignore the reply and process_timeout() will abort the connection. 2) in process_mpa_request, ignore the request and process_timeout() will abort the connection. It is ok for callers of stop_ep_timer() to abort the connection since that will leave the state in ABORTING or DEAD, and process_timeout() now ignores timeouts when the ep is in these states. 3) Double insertion on the timeout list. Since the endpoint timers are used for connection setup and teardown, we need to guard against the possibility that an endpoint is already on the timeout list. This is a rare condition and only seen under heavy load and in the presense of the above 2 bugs. Solution: In ep_timeout(), don't queue the endpoint if it is already on the queue. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-09 08:38:25 -06:00
process_timedout_eps();
}
}
static DECLARE_WORK(skb_work, process_work);
static void ep_timeout(unsigned long arg)
{
struct c4iw_ep *ep = (struct c4iw_ep *)arg;
int kickit = 0;
spin_lock(&timeout_lock);
if (!test_and_set_bit(TIMEOUT, &ep->com.flags)) {
RDMA/cxgb4: Endpoint timeout fixes 1) timedout endpoint processing can be starved. If there are continual CPL messages flowing into the driver, the endpoint timeout processing can be starved. This condition exposed the other bugs below. Solution: In process_work(), call process_timedout_eps() after each CPL is processed. 2) Connection events can be processed even though the endpoint is on the timeout list. If the endpoint is scheduled for timeout processing, then we must ignore MPA Start Requests and Replies. Solution: Change stop_ep_timer() to return 1 if the ep has already been queued for timeout processing. All the callers of stop_ep_timer() need to check this and act accordingly. There are just a few cases where the caller needs to do something different if stop_ep_timer() returns 1: 1) in process_mpa_reply(), ignore the reply and process_timeout() will abort the connection. 2) in process_mpa_request, ignore the request and process_timeout() will abort the connection. It is ok for callers of stop_ep_timer() to abort the connection since that will leave the state in ABORTING or DEAD, and process_timeout() now ignores timeouts when the ep is in these states. 3) Double insertion on the timeout list. Since the endpoint timers are used for connection setup and teardown, we need to guard against the possibility that an endpoint is already on the timeout list. This is a rare condition and only seen under heavy load and in the presense of the above 2 bugs. Solution: In ep_timeout(), don't queue the endpoint if it is already on the queue. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2014-04-09 08:38:25 -06:00
/*
* Only insert if it is not already on the list.
*/
if (!ep->entry.next) {
list_add_tail(&ep->entry, &timeout_list);
kickit = 1;
}
}
spin_unlock(&timeout_lock);
if (kickit)
queue_work(workq, &skb_work);
}
/*
* All the CM events are handled on a work queue to have a safe context.
*/
static int sched(struct c4iw_dev *dev, struct sk_buff *skb)
{
/*
* Save dev in the skb->cb area.
*/
*((struct c4iw_dev **) (skb->cb + sizeof(void *))) = dev;
/*
* Queue the skb and schedule the worker thread.
*/
skb_queue_tail(&rxq, skb);
queue_work(workq, &skb_work);
return 0;
}
static int set_tcb_rpl(struct c4iw_dev *dev, struct sk_buff *skb)
{
struct cpl_set_tcb_rpl *rpl = cplhdr(skb);
if (rpl->status != CPL_ERR_NONE) {
pr_err("Unexpected SET_TCB_RPL status %u for tid %u\n",
rpl->status, GET_TID(rpl));
}
kfree_skb(skb);
return 0;
}
static int fw6_msg(struct c4iw_dev *dev, struct sk_buff *skb)
{
struct cpl_fw6_msg *rpl = cplhdr(skb);
struct c4iw_wr_wait *wr_waitp;
int ret;
pr_debug("%s type %u\n", __func__, rpl->type);
switch (rpl->type) {
case FW6_TYPE_WR_RPL:
ret = (int)((be64_to_cpu(rpl->data[0]) >> 8) & 0xff);
wr_waitp = (struct c4iw_wr_wait *)(__force unsigned long) rpl->data[1];
pr_debug("%s wr_waitp %p ret %u\n", __func__, wr_waitp, ret);
if (wr_waitp)
c4iw_wake_up(wr_waitp, ret ? -ret : 0);
kfree_skb(skb);
break;
case FW6_TYPE_CQE:
case FW6_TYPE_OFLD_CONNECTION_WR_RPL:
sched(dev, skb);
break;
default:
pr_err("%s unexpected fw6 msg type %u\n",
__func__, rpl->type);
kfree_skb(skb);
break;
}
return 0;
}
static int peer_abort_intr(struct c4iw_dev *dev, struct sk_buff *skb)
{
struct cpl_abort_req_rss *req = cplhdr(skb);
struct c4iw_ep *ep;
unsigned int tid = GET_TID(req);
ep = get_ep_from_tid(dev, tid);
/* This EP will be dereferenced in peer_abort() */
if (!ep) {
pr_warn("Abort on non-existent endpoint, tid %d\n", tid);
kfree_skb(skb);
return 0;
}
if (cxgb_is_neg_adv(req->status)) {
pr_debug("%s Negative advice on abort- tid %u status %d (%s)\n",
__func__, ep->hwtid, req->status,
neg_adv_str(req->status));
goto out;
}
pr_debug("%s ep %p tid %u state %u\n", __func__, ep, ep->hwtid,
ep->com.state);
RDMA/iw_cxgb4: Always wake up waiter in c4iw_peer_abort_intr() Currently c4iw_peer_abort_intr() does not wake up the waiter if the endpoint state indicates we're using MPAv2 and we're currently trying to connect. This was introduced with commit 7c0a33d61187a ("RDMA/cxgb4: Don't wakeup threads for MPAv2") However, this original fix is flawed because it introduces a race that can cause a deadlock of the iwarp stack. Here is the race: ->local side sets up an active offload connection. ->local side sends MPA_START request. ->peer sends MPA_START response. ->local side ingress cpl thread begins processing the MPA_START response, but before it changes the state from MPA_REQ_SENT to FPDU_MODE: ->peer sends a RST which results in a ABORT_REQ_RSS. This triggers peer_abort_intr() which sees the state in MPA_REQ_SENT and since mpa_rev is 2, it will avoid waking up the endpoint with -ECONNRESET, assuming the stack will re-attempt the connection using MPAv1. ->Meanwhile, the cpl thread moves the state to FPDU_MODE and calls c4iw_modify_rc_qp() which calls rdma_init() which sends a RI_WR/INIT WR to firmware. But since HW sent an abort, FW correctly drops the RI_WR/INIT WR. ->So the cpl thread is stuck waiting for a reply and cannot process the ABORT_REQ_RSS cpl sitting in its input queue. Thus everything comes to a halt because no more ingress cpls are processed by the stack... The correct fix for the issue is to always do the wake up in c4iw_abort_intr() but reinitialize the wait object in c4iw_reconnect(). Fixes: 7c0a33d61187a ("RDMA/cxgb4: Don't wakeup threads for MPAv2") Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-05-06 10:48:09 -06:00
c4iw_wake_up(&ep->com.wr_wait, -ECONNRESET);
out:
sched(dev, skb);
return 0;
}
/*
* Most upcalls from the T4 Core go to sched() to
* schedule the processing on a work queue.
*/
c4iw_handler_func c4iw_handlers[NUM_CPL_CMDS] = {
[CPL_ACT_ESTABLISH] = sched,
[CPL_ACT_OPEN_RPL] = sched,
[CPL_RX_DATA] = sched,
[CPL_ABORT_RPL_RSS] = sched,
[CPL_ABORT_RPL] = sched,
[CPL_PASS_OPEN_RPL] = sched,
[CPL_CLOSE_LISTSRV_RPL] = sched,
[CPL_PASS_ACCEPT_REQ] = sched,
[CPL_PASS_ESTABLISH] = sched,
[CPL_PEER_CLOSE] = sched,
[CPL_CLOSE_CON_RPL] = sched,
[CPL_ABORT_REQ_RSS] = peer_abort_intr,
[CPL_RDMA_TERMINATE] = sched,
[CPL_FW4_ACK] = sched,
[CPL_SET_TCB_RPL] = set_tcb_rpl,
[CPL_FW6_MSG] = fw6_msg,
[CPL_RX_PKT] = sched
};
int __init c4iw_cm_init(void)
{
spin_lock_init(&timeout_lock);
skb_queue_head_init(&rxq);
workq = alloc_ordered_workqueue("iw_cxgb4", WQ_MEM_RECLAIM);
if (!workq)
return -ENOMEM;
return 0;
}
void c4iw_cm_term(void)
{
WARN_ON(!list_empty(&timeout_list));
flush_workqueue(workq);
destroy_workqueue(workq);
}