1
0
Fork 0
remarkable-linux/drivers/net/wireless/ti/wlcore/cmd.c

2107 lines
49 KiB
C
Raw Normal View History

/*
* This file is part of wl1271
*
* Copyright (C) 2009-2010 Nokia Corporation
*
* Contact: Luciano Coelho <luciano.coelho@nokia.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
* 02110-1301 USA
*
*/
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/etherdevice.h>
#include <linux/ieee80211.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 02:04:11 -06:00
#include <linux/slab.h>
#include "wlcore.h"
#include "debug.h"
#include "io.h"
#include "acx.h"
#include "wl12xx_80211.h"
#include "cmd.h"
#include "event.h"
#include "tx.h"
#include "hw_ops.h"
#define WL1271_CMD_FAST_POLL_COUNT 50
#define WL1271_WAIT_EVENT_FAST_POLL_COUNT 20
/*
* send command to firmware
*
* @wl: wl struct
* @id: command id
* @buf: buffer containing the command, must work with dma
* @len: length of the buffer
* return the cmd status code on success.
*/
static int __wlcore_cmd_send(struct wl1271 *wl, u16 id, void *buf,
size_t len, size_t res_len)
{
struct wl1271_cmd_header *cmd;
unsigned long timeout;
u32 intr;
int ret;
u16 status;
u16 poll_count = 0;
if (unlikely(wl->state == WLCORE_STATE_RESTARTING &&
id != CMD_STOP_FWLOGGER))
return -EIO;
if (WARN_ON_ONCE(len < sizeof(*cmd)))
return -EIO;
cmd = buf;
wl1271: fix endianess issues We were not handling endianess correctly. The wl1271 chip runs on little-endian values. This patch makes sure that all the communication with the wl1271 firmware is done in little-endian by using cpu_to_le* and le*_to_cpu where appropriate. Also, all the struct definitions for data exchanged with the firmware has been changed to use __le16/32 types instead of u16/32. This fixes a few sparse warnings, such as these: drivers/net/wireless/wl12xx/wl1271_cmd.c:554:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:555:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:577:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:579:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:676:18: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:787:22: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:789:21: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_tx.c:98:47: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_acx.c:932:32: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:191:32: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:197:38: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:199:37: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:255:40: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:275:53: warning: incorrect type in assignment (different base types) Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-15 01:33:29 -06:00
cmd->id = cpu_to_le16(id);
cmd->status = 0;
WARN_ON(len % 4 != 0);
WARN_ON(test_bit(WL1271_FLAG_IN_ELP, &wl->flags));
ret = wlcore_write(wl, wl->cmd_box_addr, buf, len, false);
if (ret < 0)
return ret;
/*
* TODO: we just need this because one bit is in a different
* place. Is there any better way?
*/
ret = wl->ops->trigger_cmd(wl, wl->cmd_box_addr, buf, len);
if (ret < 0)
return ret;
timeout = jiffies + msecs_to_jiffies(WL1271_COMMAND_TIMEOUT);
ret = wlcore_read_reg(wl, REG_INTERRUPT_NO_CLEAR, &intr);
if (ret < 0)
return ret;
while (!(intr & WL1271_ACX_INTR_CMD_COMPLETE)) {
if (time_after(jiffies, timeout)) {
wl1271_error("command complete timeout");
return -ETIMEDOUT;
}
poll_count++;
if (poll_count < WL1271_CMD_FAST_POLL_COUNT)
udelay(10);
else
msleep(1);
ret = wlcore_read_reg(wl, REG_INTERRUPT_NO_CLEAR, &intr);
if (ret < 0)
return ret;
}
/* read back the status code of the command */
if (res_len == 0)
res_len = sizeof(struct wl1271_cmd_header);
ret = wlcore_read(wl, wl->cmd_box_addr, cmd, res_len, false);
if (ret < 0)
return ret;
status = le16_to_cpu(cmd->status);
ret = wlcore_write_reg(wl, REG_INTERRUPT_ACK,
WL1271_ACX_INTR_CMD_COMPLETE);
if (ret < 0)
return ret;
return status;
}
/*
* send command to fw and return cmd status on success
* valid_rets contains a bitmap of allowed error codes
*/
static int wlcore_cmd_send_failsafe(struct wl1271 *wl, u16 id, void *buf,
size_t len, size_t res_len,
unsigned long valid_rets)
{
int ret = __wlcore_cmd_send(wl, id, buf, len, res_len);
if (ret < 0)
goto fail;
/* success is always a valid status */
valid_rets |= BIT(CMD_STATUS_SUCCESS);
if (ret >= MAX_COMMAND_STATUS ||
!test_bit(ret, &valid_rets)) {
wl1271_error("command execute failure %d", ret);
ret = -EIO;
goto fail;
}
return ret;
fail:
wl12xx_queue_recovery_work(wl);
return ret;
}
/*
* wrapper for wlcore_cmd_send that accept only CMD_STATUS_SUCCESS
* return 0 on success.
*/
int wl1271_cmd_send(struct wl1271 *wl, u16 id, void *buf, size_t len,
size_t res_len)
{
int ret = wlcore_cmd_send_failsafe(wl, id, buf, len, res_len, 0);
if (ret < 0)
return ret;
return 0;
}
EXPORT_SYMBOL_GPL(wl1271_cmd_send);
/*
* Poll the mailbox event field until any of the bits in the mask is set or a
* timeout occurs (WL1271_EVENT_TIMEOUT in msecs)
*/
int wlcore_cmd_wait_for_event_or_timeout(struct wl1271 *wl,
u32 mask, bool *timeout)
{
u32 *events_vector;
u32 event;
unsigned long timeout_time;
u16 poll_count = 0;
int ret = 0;
*timeout = false;
events_vector = kmalloc(sizeof(*events_vector), GFP_KERNEL | GFP_DMA);
if (!events_vector)
return -ENOMEM;
timeout_time = jiffies + msecs_to_jiffies(WL1271_EVENT_TIMEOUT);
do {
if (time_after(jiffies, timeout_time)) {
wl1271_debug(DEBUG_CMD, "timeout waiting for event %d",
(int)mask);
*timeout = true;
goto out;
}
poll_count++;
if (poll_count < WL1271_WAIT_EVENT_FAST_POLL_COUNT)
usleep_range(50, 51);
else
usleep_range(1000, 5000);
/* read from both event fields */
ret = wlcore_read(wl, wl->mbox_ptr[0], events_vector,
sizeof(*events_vector), false);
if (ret < 0)
goto out;
event = *events_vector & mask;
ret = wlcore_read(wl, wl->mbox_ptr[1], events_vector,
sizeof(*events_vector), false);
if (ret < 0)
goto out;
event |= *events_vector & mask;
} while (!event);
out:
kfree(events_vector);
return ret;
}
EXPORT_SYMBOL_GPL(wlcore_cmd_wait_for_event_or_timeout);
int wl12xx_cmd_role_enable(struct wl1271 *wl, u8 *addr, u8 role_type,
u8 *role_id)
{
struct wl12xx_cmd_role_enable *cmd;
int ret;
wl1271_debug(DEBUG_CMD, "cmd role enable");
if (WARN_ON(*role_id != WL12XX_INVALID_ROLE_ID))
return -EBUSY;
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
if (!cmd) {
ret = -ENOMEM;
goto out;
}
/* get role id */
cmd->role_id = find_first_zero_bit(wl->roles_map, WL12XX_MAX_ROLES);
if (cmd->role_id >= WL12XX_MAX_ROLES) {
ret = -EBUSY;
goto out_free;
}
memcpy(cmd->mac_address, addr, ETH_ALEN);
cmd->role_type = role_type;
ret = wl1271_cmd_send(wl, CMD_ROLE_ENABLE, cmd, sizeof(*cmd), 0);
if (ret < 0) {
wl1271_error("failed to initiate cmd role enable");
goto out_free;
}
__set_bit(cmd->role_id, wl->roles_map);
*role_id = cmd->role_id;
out_free:
kfree(cmd);
out:
return ret;
}
int wl12xx_cmd_role_disable(struct wl1271 *wl, u8 *role_id)
{
struct wl12xx_cmd_role_disable *cmd;
int ret;
wl1271_debug(DEBUG_CMD, "cmd role disable");
if (WARN_ON(*role_id == WL12XX_INVALID_ROLE_ID))
return -ENOENT;
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
if (!cmd) {
ret = -ENOMEM;
goto out;
}
cmd->role_id = *role_id;
ret = wl1271_cmd_send(wl, CMD_ROLE_DISABLE, cmd, sizeof(*cmd), 0);
if (ret < 0) {
wl1271_error("failed to initiate cmd role disable");
goto out_free;
}
__clear_bit(*role_id, wl->roles_map);
*role_id = WL12XX_INVALID_ROLE_ID;
out_free:
kfree(cmd);
out:
return ret;
}
static int wlcore_get_new_session_id(struct wl1271 *wl, u8 hlid)
{
if (wl->session_ids[hlid] >= SESSION_COUNTER_MAX)
wl->session_ids[hlid] = 0;
wl->session_ids[hlid]++;
return wl->session_ids[hlid];
}
int wl12xx_allocate_link(struct wl1271 *wl, struct wl12xx_vif *wlvif, u8 *hlid)
{
unsigned long flags;
u8 link = find_first_zero_bit(wl->links_map, wl->num_links);
if (link >= wl->num_links)
return -EBUSY;
wl->session_ids[link] = wlcore_get_new_session_id(wl, link);
/* these bits are used by op_tx */
spin_lock_irqsave(&wl->wl_lock, flags);
__set_bit(link, wl->links_map);
__set_bit(link, wlvif->links_map);
spin_unlock_irqrestore(&wl->wl_lock, flags);
/*
* take the last "freed packets" value from the current FW status.
* on recovery, we might not have fw_status yet, and
* tx_lnk_free_pkts will be NULL. check for it.
*/
if (wl->fw_status->counters.tx_lnk_free_pkts)
wl->links[link].prev_freed_pkts =
wl->fw_status->counters.tx_lnk_free_pkts[link];
wl->links[link].wlvif = wlvif;
/*
* Take saved value for total freed packets from wlvif, in case this is
* recovery/resume
*/
if (wlvif->bss_type != BSS_TYPE_AP_BSS)
wl->links[link].total_freed_pkts = wlvif->total_freed_pkts;
*hlid = link;
wl->active_link_count++;
return 0;
}
void wl12xx_free_link(struct wl1271 *wl, struct wl12xx_vif *wlvif, u8 *hlid)
{
unsigned long flags;
if (*hlid == WL12XX_INVALID_LINK_ID)
return;
/* these bits are used by op_tx */
spin_lock_irqsave(&wl->wl_lock, flags);
__clear_bit(*hlid, wl->links_map);
__clear_bit(*hlid, wlvif->links_map);
spin_unlock_irqrestore(&wl->wl_lock, flags);
wl->links[*hlid].allocated_pkts = 0;
wl->links[*hlid].prev_freed_pkts = 0;
wl->links[*hlid].ba_bitmap = 0;
eth_zero_addr(wl->links[*hlid].addr);
/*
* At this point op_tx() will not add more packets to the queues. We
* can purge them.
*/
wl1271_tx_reset_link_queues(wl, *hlid);
wl->links[*hlid].wlvif = NULL;
if (wlvif->bss_type == BSS_TYPE_AP_BSS &&
*hlid == wlvif->ap.bcast_hlid) {
u32 sqn_padding = WL1271_TX_SQN_POST_RECOVERY_PADDING;
/*
* save the total freed packets in the wlvif, in case this is
* recovery or suspend
*/
wlvif->total_freed_pkts = wl->links[*hlid].total_freed_pkts;
/*
* increment the initial seq number on recovery to account for
* transmitted packets that we haven't yet got in the FW status
*/
if (wlvif->encryption_type == KEY_GEM)
sqn_padding = WL1271_TX_SQN_POST_RECOVERY_PADDING_GEM;
if (test_bit(WL1271_FLAG_RECOVERY_IN_PROGRESS, &wl->flags))
wlvif->total_freed_pkts += sqn_padding;
}
wl->links[*hlid].total_freed_pkts = 0;
*hlid = WL12XX_INVALID_LINK_ID;
wl->active_link_count--;
WARN_ON_ONCE(wl->active_link_count < 0);
}
u8 wlcore_get_native_channel_type(u8 nl_channel_type)
{
switch (nl_channel_type) {
case NL80211_CHAN_NO_HT:
return WLCORE_CHAN_NO_HT;
case NL80211_CHAN_HT20:
return WLCORE_CHAN_HT20;
case NL80211_CHAN_HT40MINUS:
return WLCORE_CHAN_HT40MINUS;
case NL80211_CHAN_HT40PLUS:
return WLCORE_CHAN_HT40PLUS;
default:
WARN_ON(1);
return WLCORE_CHAN_NO_HT;
}
}
EXPORT_SYMBOL_GPL(wlcore_get_native_channel_type);
static int wl12xx_cmd_role_start_dev(struct wl1271 *wl,
struct wl12xx_vif *wlvif,
enum nl80211_band band,
int channel)
{
struct wl12xx_cmd_role_start *cmd;
int ret;
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
if (!cmd) {
ret = -ENOMEM;
goto out;
}
wl1271_debug(DEBUG_CMD, "cmd role start dev %d", wlvif->dev_role_id);
cmd->role_id = wlvif->dev_role_id;
if (band == NL80211_BAND_5GHZ)
cmd->band = WLCORE_BAND_5GHZ;
cmd->channel = channel;
if (wlvif->dev_hlid == WL12XX_INVALID_LINK_ID) {
ret = wl12xx_allocate_link(wl, wlvif, &wlvif->dev_hlid);
if (ret)
goto out_free;
}
cmd->device.hlid = wlvif->dev_hlid;
cmd->device.session = wl->session_ids[wlvif->dev_hlid];
wl1271_debug(DEBUG_CMD, "role start: roleid=%d, hlid=%d, session=%d",
cmd->role_id, cmd->device.hlid, cmd->device.session);
ret = wl1271_cmd_send(wl, CMD_ROLE_START, cmd, sizeof(*cmd), 0);
if (ret < 0) {
wl1271_error("failed to initiate cmd role enable");
goto err_hlid;
}
goto out_free;
err_hlid:
/* clear links on error */
wl12xx_free_link(wl, wlvif, &wlvif->dev_hlid);
out_free:
kfree(cmd);
out:
return ret;
}
static int wl12xx_cmd_role_stop_dev(struct wl1271 *wl,
struct wl12xx_vif *wlvif)
{
struct wl12xx_cmd_role_stop *cmd;
int ret;
if (WARN_ON(wlvif->dev_hlid == WL12XX_INVALID_LINK_ID))
return -EINVAL;
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
if (!cmd) {
ret = -ENOMEM;
goto out;
}
wl1271_debug(DEBUG_CMD, "cmd role stop dev");
cmd->role_id = wlvif->dev_role_id;
cmd->disc_type = DISCONNECT_IMMEDIATE;
cmd->reason = cpu_to_le16(WLAN_REASON_UNSPECIFIED);
ret = wl1271_cmd_send(wl, CMD_ROLE_STOP, cmd, sizeof(*cmd), 0);
if (ret < 0) {
wl1271_error("failed to initiate cmd role stop");
goto out_free;
}
wl12xx_free_link(wl, wlvif, &wlvif->dev_hlid);
out_free:
kfree(cmd);
out:
return ret;
}
int wl12xx_cmd_role_start_sta(struct wl1271 *wl, struct wl12xx_vif *wlvif)
{
struct ieee80211_vif *vif = wl12xx_wlvif_to_vif(wlvif);
struct wl12xx_cmd_role_start *cmd;
u32 supported_rates;
int ret;
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
if (!cmd) {
ret = -ENOMEM;
goto out;
}
wl1271_debug(DEBUG_CMD, "cmd role start sta %d", wlvif->role_id);
cmd->role_id = wlvif->role_id;
if (wlvif->band == NL80211_BAND_5GHZ)
cmd->band = WLCORE_BAND_5GHZ;
cmd->channel = wlvif->channel;
cmd->sta.basic_rate_set = cpu_to_le32(wlvif->basic_rate_set);
cmd->sta.beacon_interval = cpu_to_le16(wlvif->beacon_int);
cmd->sta.ssid_type = WL12XX_SSID_TYPE_ANY;
cmd->sta.ssid_len = wlvif->ssid_len;
memcpy(cmd->sta.ssid, wlvif->ssid, wlvif->ssid_len);
memcpy(cmd->sta.bssid, vif->bss_conf.bssid, ETH_ALEN);
supported_rates = CONF_TX_ENABLED_RATES | CONF_TX_MCS_RATES |
wlcore_hw_sta_get_ap_rate_mask(wl, wlvif);
if (wlvif->p2p)
supported_rates &= ~CONF_TX_CCK_RATES;
cmd->sta.local_rates = cpu_to_le32(supported_rates);
cmd->channel_type = wlcore_get_native_channel_type(wlvif->channel_type);
if (wlvif->sta.hlid == WL12XX_INVALID_LINK_ID) {
ret = wl12xx_allocate_link(wl, wlvif, &wlvif->sta.hlid);
if (ret)
goto out_free;
}
cmd->sta.hlid = wlvif->sta.hlid;
cmd->sta.session = wl->session_ids[wlvif->sta.hlid];
/*
* We don't have the correct remote rates in this stage. The
* rates will be reconfigured later, after association, if the
* firmware supports ACX_PEER_CAP. Otherwise, there's nothing
* we can do, so use all supported_rates here.
*/
cmd->sta.remote_rates = cpu_to_le32(supported_rates);
wl1271_debug(DEBUG_CMD, "role start: roleid=%d, hlid=%d, session=%d "
"basic_rate_set: 0x%x, remote_rates: 0x%x",
wlvif->role_id, cmd->sta.hlid, cmd->sta.session,
wlvif->basic_rate_set, wlvif->rate_set);
ret = wl1271_cmd_send(wl, CMD_ROLE_START, cmd, sizeof(*cmd), 0);
if (ret < 0) {
wl1271_error("failed to initiate cmd role start sta");
goto err_hlid;
}
wlvif->sta.role_chan_type = wlvif->channel_type;
goto out_free;
err_hlid:
/* clear links on error. */
wl12xx_free_link(wl, wlvif, &wlvif->sta.hlid);
out_free:
kfree(cmd);
out:
return ret;
}
/* use this function to stop ibss as well */
int wl12xx_cmd_role_stop_sta(struct wl1271 *wl, struct wl12xx_vif *wlvif)
{
struct wl12xx_cmd_role_stop *cmd;
int ret;
if (WARN_ON(wlvif->sta.hlid == WL12XX_INVALID_LINK_ID))
return -EINVAL;
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
if (!cmd) {
ret = -ENOMEM;
goto out;
}
wl1271_debug(DEBUG_CMD, "cmd role stop sta %d", wlvif->role_id);
cmd->role_id = wlvif->role_id;
cmd->disc_type = DISCONNECT_IMMEDIATE;
cmd->reason = cpu_to_le16(WLAN_REASON_UNSPECIFIED);
ret = wl1271_cmd_send(wl, CMD_ROLE_STOP, cmd, sizeof(*cmd), 0);
if (ret < 0) {
wl1271_error("failed to initiate cmd role stop sta");
goto out_free;
}
wl12xx_free_link(wl, wlvif, &wlvif->sta.hlid);
out_free:
kfree(cmd);
out:
return ret;
}
int wl12xx_cmd_role_start_ap(struct wl1271 *wl, struct wl12xx_vif *wlvif)
{
struct wl12xx_cmd_role_start *cmd;
struct ieee80211_vif *vif = wl12xx_wlvif_to_vif(wlvif);
struct ieee80211_bss_conf *bss_conf = &vif->bss_conf;
u32 supported_rates;
int ret;
wl1271_debug(DEBUG_CMD, "cmd role start ap %d", wlvif->role_id);
/* If MESH --> ssid_len is always 0 */
if (!ieee80211_vif_is_mesh(vif)) {
/* trying to use hidden SSID with an old hostapd version */
if (wlvif->ssid_len == 0 && !bss_conf->hidden_ssid) {
wl1271_error("got a null SSID from beacon/bss");
ret = -EINVAL;
goto out;
}
}
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
if (!cmd) {
ret = -ENOMEM;
goto out;
}
ret = wl12xx_allocate_link(wl, wlvif, &wlvif->ap.global_hlid);
if (ret < 0)
goto out_free;
ret = wl12xx_allocate_link(wl, wlvif, &wlvif->ap.bcast_hlid);
if (ret < 0)
goto out_free_global;
/* use the previous security seq, if this is a recovery/resume */
wl->links[wlvif->ap.bcast_hlid].total_freed_pkts =
wlvif->total_freed_pkts;
cmd->role_id = wlvif->role_id;
cmd->ap.aging_period = cpu_to_le16(wl->conf.tx.ap_aging_period);
cmd->ap.bss_index = WL1271_AP_BSS_INDEX;
cmd->ap.global_hlid = wlvif->ap.global_hlid;
cmd->ap.broadcast_hlid = wlvif->ap.bcast_hlid;
cmd->ap.global_session_id = wl->session_ids[wlvif->ap.global_hlid];
cmd->ap.bcast_session_id = wl->session_ids[wlvif->ap.bcast_hlid];
cmd->ap.basic_rate_set = cpu_to_le32(wlvif->basic_rate_set);
cmd->ap.beacon_interval = cpu_to_le16(wlvif->beacon_int);
cmd->ap.dtim_interval = bss_conf->dtim_period;
cmd->ap.beacon_expiry = WL1271_AP_DEF_BEACON_EXP;
/* FIXME: Change when adding DFS */
cmd->ap.reset_tsf = 1; /* By default reset AP TSF */
cmd->ap.wmm = wlvif->wmm_enabled;
cmd->channel = wlvif->channel;
cmd->channel_type = wlcore_get_native_channel_type(wlvif->channel_type);
if (!bss_conf->hidden_ssid) {
/* take the SSID from the beacon for backward compatibility */
cmd->ap.ssid_type = WL12XX_SSID_TYPE_PUBLIC;
cmd->ap.ssid_len = wlvif->ssid_len;
memcpy(cmd->ap.ssid, wlvif->ssid, wlvif->ssid_len);
} else {
cmd->ap.ssid_type = WL12XX_SSID_TYPE_HIDDEN;
cmd->ap.ssid_len = bss_conf->ssid_len;
memcpy(cmd->ap.ssid, bss_conf->ssid, bss_conf->ssid_len);
}
supported_rates = CONF_TX_ENABLED_RATES | CONF_TX_MCS_RATES |
wlcore_hw_ap_get_mimo_wide_rate_mask(wl, wlvif);
if (wlvif->p2p)
supported_rates &= ~CONF_TX_CCK_RATES;
wl1271_debug(DEBUG_CMD, "cmd role start ap with supported_rates 0x%08x",
supported_rates);
cmd->ap.local_rates = cpu_to_le32(supported_rates);
switch (wlvif->band) {
case NL80211_BAND_2GHZ:
cmd->band = WLCORE_BAND_2_4GHZ;
break;
case NL80211_BAND_5GHZ:
cmd->band = WLCORE_BAND_5GHZ;
break;
default:
wl1271_warning("ap start - unknown band: %d", (int)wlvif->band);
cmd->band = WLCORE_BAND_2_4GHZ;
break;
}
ret = wl1271_cmd_send(wl, CMD_ROLE_START, cmd, sizeof(*cmd), 0);
if (ret < 0) {
wl1271_error("failed to initiate cmd role start ap");
goto out_free_bcast;
}
goto out_free;
out_free_bcast:
wl12xx_free_link(wl, wlvif, &wlvif->ap.bcast_hlid);
out_free_global:
wl12xx_free_link(wl, wlvif, &wlvif->ap.global_hlid);
out_free:
kfree(cmd);
out:
return ret;
}
int wl12xx_cmd_role_stop_ap(struct wl1271 *wl, struct wl12xx_vif *wlvif)
{
struct wl12xx_cmd_role_stop *cmd;
int ret;
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
if (!cmd) {
ret = -ENOMEM;
goto out;
}
wl1271_debug(DEBUG_CMD, "cmd role stop ap %d", wlvif->role_id);
cmd->role_id = wlvif->role_id;
ret = wl1271_cmd_send(wl, CMD_ROLE_STOP, cmd, sizeof(*cmd), 0);
if (ret < 0) {
wl1271_error("failed to initiate cmd role stop ap");
goto out_free;
}
wl12xx_free_link(wl, wlvif, &wlvif->ap.bcast_hlid);
wl12xx_free_link(wl, wlvif, &wlvif->ap.global_hlid);
out_free:
kfree(cmd);
out:
return ret;
}
int wl12xx_cmd_role_start_ibss(struct wl1271 *wl, struct wl12xx_vif *wlvif)
{
struct ieee80211_vif *vif = wl12xx_wlvif_to_vif(wlvif);
struct wl12xx_cmd_role_start *cmd;
struct ieee80211_bss_conf *bss_conf = &vif->bss_conf;
int ret;
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
if (!cmd) {
ret = -ENOMEM;
goto out;
}
wl1271_debug(DEBUG_CMD, "cmd role start ibss %d", wlvif->role_id);
cmd->role_id = wlvif->role_id;
if (wlvif->band == NL80211_BAND_5GHZ)
cmd->band = WLCORE_BAND_5GHZ;
cmd->channel = wlvif->channel;
cmd->ibss.basic_rate_set = cpu_to_le32(wlvif->basic_rate_set);
cmd->ibss.beacon_interval = cpu_to_le16(wlvif->beacon_int);
cmd->ibss.dtim_interval = bss_conf->dtim_period;
cmd->ibss.ssid_type = WL12XX_SSID_TYPE_ANY;
cmd->ibss.ssid_len = wlvif->ssid_len;
memcpy(cmd->ibss.ssid, wlvif->ssid, wlvif->ssid_len);
memcpy(cmd->ibss.bssid, vif->bss_conf.bssid, ETH_ALEN);
cmd->sta.local_rates = cpu_to_le32(wlvif->rate_set);
if (wlvif->sta.hlid == WL12XX_INVALID_LINK_ID) {
ret = wl12xx_allocate_link(wl, wlvif, &wlvif->sta.hlid);
if (ret)
goto out_free;
}
cmd->ibss.hlid = wlvif->sta.hlid;
cmd->ibss.remote_rates = cpu_to_le32(wlvif->rate_set);
wl1271_debug(DEBUG_CMD, "role start: roleid=%d, hlid=%d, session=%d "
"basic_rate_set: 0x%x, remote_rates: 0x%x",
wlvif->role_id, cmd->sta.hlid, cmd->sta.session,
wlvif->basic_rate_set, wlvif->rate_set);
wl1271_debug(DEBUG_CMD, "vif->bss_conf.bssid = %pM",
vif->bss_conf.bssid);
ret = wl1271_cmd_send(wl, CMD_ROLE_START, cmd, sizeof(*cmd), 0);
if (ret < 0) {
wl1271_error("failed to initiate cmd role enable");
goto err_hlid;
}
goto out_free;
err_hlid:
/* clear links on error. */
wl12xx_free_link(wl, wlvif, &wlvif->sta.hlid);
out_free:
kfree(cmd);
out:
return ret;
}
/**
* send test command to firmware
*
* @wl: wl struct
* @buf: buffer containing the command, with all headers, must work with dma
* @len: length of the buffer
* @answer: is answer needed
*/
int wl1271_cmd_test(struct wl1271 *wl, void *buf, size_t buf_len, u8 answer)
{
int ret;
size_t res_len = 0;
wl1271_debug(DEBUG_CMD, "cmd test");
if (answer)
res_len = buf_len;
ret = wl1271_cmd_send(wl, CMD_TEST, buf, buf_len, res_len);
if (ret < 0) {
wl1271_warning("TEST command failed");
return ret;
}
return ret;
}
EXPORT_SYMBOL_GPL(wl1271_cmd_test);
/**
* read acx from firmware
*
* @wl: wl struct
* @id: acx id
* @buf: buffer for the response, including all headers, must work with dma
* @len: length of buf
*/
int wl1271_cmd_interrogate(struct wl1271 *wl, u16 id, void *buf,
size_t cmd_len, size_t res_len)
{
struct acx_header *acx = buf;
int ret;
wl1271_debug(DEBUG_CMD, "cmd interrogate");
wl1271: fix endianess issues We were not handling endianess correctly. The wl1271 chip runs on little-endian values. This patch makes sure that all the communication with the wl1271 firmware is done in little-endian by using cpu_to_le* and le*_to_cpu where appropriate. Also, all the struct definitions for data exchanged with the firmware has been changed to use __le16/32 types instead of u16/32. This fixes a few sparse warnings, such as these: drivers/net/wireless/wl12xx/wl1271_cmd.c:554:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:555:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:577:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:579:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:676:18: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:787:22: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:789:21: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_tx.c:98:47: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_acx.c:932:32: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:191:32: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:197:38: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:199:37: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:255:40: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:275:53: warning: incorrect type in assignment (different base types) Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-15 01:33:29 -06:00
acx->id = cpu_to_le16(id);
/* response payload length, does not include any headers */
acx->len = cpu_to_le16(res_len - sizeof(*acx));
ret = wl1271_cmd_send(wl, CMD_INTERROGATE, acx, cmd_len, res_len);
if (ret < 0)
wl1271_error("INTERROGATE command failed");
return ret;
}
/**
* write acx value to firmware
*
* @wl: wl struct
* @id: acx id
* @buf: buffer containing acx, including all headers, must work with dma
* @len: length of buf
* @valid_rets: bitmap of valid cmd status codes (i.e. return values).
* return the cmd status on success.
*/
int wlcore_cmd_configure_failsafe(struct wl1271 *wl, u16 id, void *buf,
size_t len, unsigned long valid_rets)
{
struct acx_header *acx = buf;
int ret;
wl1271_debug(DEBUG_CMD, "cmd configure (%d)", id);
if (WARN_ON_ONCE(len < sizeof(*acx)))
return -EIO;
wl1271: fix endianess issues We were not handling endianess correctly. The wl1271 chip runs on little-endian values. This patch makes sure that all the communication with the wl1271 firmware is done in little-endian by using cpu_to_le* and le*_to_cpu where appropriate. Also, all the struct definitions for data exchanged with the firmware has been changed to use __le16/32 types instead of u16/32. This fixes a few sparse warnings, such as these: drivers/net/wireless/wl12xx/wl1271_cmd.c:554:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:555:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:577:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:579:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:676:18: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:787:22: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:789:21: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_tx.c:98:47: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_acx.c:932:32: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:191:32: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:197:38: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:199:37: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:255:40: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:275:53: warning: incorrect type in assignment (different base types) Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-15 01:33:29 -06:00
acx->id = cpu_to_le16(id);
/* payload length, does not include any headers */
wl1271: fix endianess issues We were not handling endianess correctly. The wl1271 chip runs on little-endian values. This patch makes sure that all the communication with the wl1271 firmware is done in little-endian by using cpu_to_le* and le*_to_cpu where appropriate. Also, all the struct definitions for data exchanged with the firmware has been changed to use __le16/32 types instead of u16/32. This fixes a few sparse warnings, such as these: drivers/net/wireless/wl12xx/wl1271_cmd.c:554:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:555:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:577:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:579:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:676:18: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:787:22: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:789:21: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_tx.c:98:47: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_acx.c:932:32: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:191:32: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:197:38: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:199:37: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:255:40: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:275:53: warning: incorrect type in assignment (different base types) Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-15 01:33:29 -06:00
acx->len = cpu_to_le16(len - sizeof(*acx));
ret = wlcore_cmd_send_failsafe(wl, CMD_CONFIGURE, acx, len, 0,
valid_rets);
if (ret < 0) {
wl1271_warning("CONFIGURE command NOK");
return ret;
}
return ret;
}
/*
* wrapper for wlcore_cmd_configure that accepts only success status.
* return 0 on success
*/
int wl1271_cmd_configure(struct wl1271 *wl, u16 id, void *buf, size_t len)
{
int ret = wlcore_cmd_configure_failsafe(wl, id, buf, len, 0);
if (ret < 0)
return ret;
return 0;
}
EXPORT_SYMBOL_GPL(wl1271_cmd_configure);
int wl1271_cmd_data_path(struct wl1271 *wl, bool enable)
{
struct cmd_enabledisable_path *cmd;
int ret;
u16 cmd_rx, cmd_tx;
wl1271_debug(DEBUG_CMD, "cmd data path");
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
if (!cmd) {
ret = -ENOMEM;
goto out;
}
/* the channel here is only used for calibration, so hardcoded to 1 */
cmd->channel = 1;
if (enable) {
cmd_rx = CMD_ENABLE_RX;
cmd_tx = CMD_ENABLE_TX;
} else {
cmd_rx = CMD_DISABLE_RX;
cmd_tx = CMD_DISABLE_TX;
}
ret = wl1271_cmd_send(wl, cmd_rx, cmd, sizeof(*cmd), 0);
if (ret < 0) {
wl1271_error("rx %s cmd for channel %d failed",
enable ? "start" : "stop", cmd->channel);
goto out;
}
wl1271_debug(DEBUG_BOOT, "rx %s cmd channel %d",
enable ? "start" : "stop", cmd->channel);
ret = wl1271_cmd_send(wl, cmd_tx, cmd, sizeof(*cmd), 0);
if (ret < 0) {
wl1271_error("tx %s cmd for channel %d failed",
enable ? "start" : "stop", cmd->channel);
goto out;
}
wl1271_debug(DEBUG_BOOT, "tx %s cmd channel %d",
enable ? "start" : "stop", cmd->channel);
out:
kfree(cmd);
return ret;
}
EXPORT_SYMBOL_GPL(wl1271_cmd_data_path);
int wl1271_cmd_ps_mode(struct wl1271 *wl, struct wl12xx_vif *wlvif,
u8 ps_mode, u16 auto_ps_timeout)
{
struct wl1271_cmd_ps_params *ps_params = NULL;
int ret = 0;
wl1271_debug(DEBUG_CMD, "cmd set ps mode");
ps_params = kzalloc(sizeof(*ps_params), GFP_KERNEL);
if (!ps_params) {
ret = -ENOMEM;
goto out;
}
ps_params->role_id = wlvif->role_id;
ps_params->ps_mode = ps_mode;
ps_params->auto_ps_timeout = auto_ps_timeout;
ret = wl1271_cmd_send(wl, CMD_SET_PS_MODE, ps_params,
sizeof(*ps_params), 0);
if (ret < 0) {
wl1271_error("cmd set_ps_mode failed");
goto out;
}
out:
kfree(ps_params);
return ret;
}
int wl1271_cmd_template_set(struct wl1271 *wl, u8 role_id,
u16 template_id, void *buf, size_t buf_len,
int index, u32 rates)
{
struct wl1271_cmd_template_set *cmd;
int ret = 0;
wl1271_debug(DEBUG_CMD, "cmd template_set %d (role %d)",
template_id, role_id);
WARN_ON(buf_len > WL1271_CMD_TEMPL_MAX_SIZE);
buf_len = min_t(size_t, buf_len, WL1271_CMD_TEMPL_MAX_SIZE);
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
if (!cmd) {
ret = -ENOMEM;
goto out;
}
/* during initialization wlvif is NULL */
cmd->role_id = role_id;
cmd->len = cpu_to_le16(buf_len);
cmd->template_type = template_id;
cmd->enabled_rates = cpu_to_le32(rates);
cmd->short_retry_limit = wl->conf.tx.tmpl_short_retry_limit;
cmd->long_retry_limit = wl->conf.tx.tmpl_long_retry_limit;
cmd->index = index;
if (buf)
memcpy(cmd->template_data, buf, buf_len);
ret = wl1271_cmd_send(wl, CMD_SET_TEMPLATE, cmd, sizeof(*cmd), 0);
if (ret < 0) {
wl1271_warning("cmd set_template failed: %d", ret);
goto out_free;
}
out_free:
kfree(cmd);
out:
return ret;
}
int wl12xx_cmd_build_null_data(struct wl1271 *wl, struct wl12xx_vif *wlvif)
{
struct sk_buff *skb = NULL;
int size;
void *ptr;
int ret = -ENOMEM;
if (wlvif->bss_type == BSS_TYPE_IBSS) {
size = sizeof(struct wl12xx_null_data_template);
ptr = NULL;
} else {
skb = ieee80211_nullfunc_get(wl->hw,
wl12xx_wlvif_to_vif(wlvif));
if (!skb)
goto out;
size = skb->len;
ptr = skb->data;
}
ret = wl1271_cmd_template_set(wl, wlvif->role_id,
CMD_TEMPL_NULL_DATA, ptr, size, 0,
wlvif->basic_rate);
out:
dev_kfree_skb(skb);
if (ret)
wl1271_warning("cmd buld null data failed %d", ret);
return ret;
}
int wl12xx_cmd_build_klv_null_data(struct wl1271 *wl,
struct wl12xx_vif *wlvif)
{
struct ieee80211_vif *vif = wl12xx_wlvif_to_vif(wlvif);
struct sk_buff *skb = NULL;
int ret = -ENOMEM;
skb = ieee80211_nullfunc_get(wl->hw, vif);
if (!skb)
goto out;
ret = wl1271_cmd_template_set(wl, wlvif->role_id, CMD_TEMPL_KLV,
skb->data, skb->len,
wlvif->sta.klv_template_id,
wlvif->basic_rate);
out:
dev_kfree_skb(skb);
if (ret)
wl1271_warning("cmd build klv null data failed %d", ret);
return ret;
}
int wl1271_cmd_build_ps_poll(struct wl1271 *wl, struct wl12xx_vif *wlvif,
u16 aid)
{
struct ieee80211_vif *vif = wl12xx_wlvif_to_vif(wlvif);
struct sk_buff *skb;
int ret = 0;
skb = ieee80211_pspoll_get(wl->hw, vif);
if (!skb)
goto out;
ret = wl1271_cmd_template_set(wl, wlvif->role_id,
CMD_TEMPL_PS_POLL, skb->data,
skb->len, 0, wlvif->basic_rate_set);
out:
dev_kfree_skb(skb);
return ret;
}
int wl12xx_cmd_build_probe_req(struct wl1271 *wl, struct wl12xx_vif *wlvif,
u8 role_id, u8 band,
const u8 *ssid, size_t ssid_len,
const u8 *ie0, size_t ie0_len, const u8 *ie1,
size_t ie1_len, bool sched_scan)
{
struct ieee80211_vif *vif = wl12xx_wlvif_to_vif(wlvif);
struct sk_buff *skb;
int ret;
u32 rate;
u16 template_id_2_4 = wl->scan_templ_id_2_4;
u16 template_id_5 = wl->scan_templ_id_5;
wl1271_debug(DEBUG_SCAN, "build probe request band %d", band);
skb = ieee80211_probereq_get(wl->hw, vif->addr, ssid, ssid_len,
ie0_len + ie1_len);
if (!skb) {
ret = -ENOMEM;
goto out;
}
if (ie0_len)
skb_put_data(skb, ie0, ie0_len);
if (ie1_len)
skb_put_data(skb, ie1, ie1_len);
if (sched_scan &&
(wl->quirks & WLCORE_QUIRK_DUAL_PROBE_TMPL)) {
template_id_2_4 = wl->sched_scan_templ_id_2_4;
template_id_5 = wl->sched_scan_templ_id_5;
}
rate = wl1271_tx_min_rate_get(wl, wlvif->bitrate_masks[band]);
if (band == NL80211_BAND_2GHZ)
ret = wl1271_cmd_template_set(wl, role_id,
template_id_2_4,
skb->data, skb->len, 0, rate);
else
ret = wl1271_cmd_template_set(wl, role_id,
template_id_5,
skb->data, skb->len, 0, rate);
out:
dev_kfree_skb(skb);
return ret;
}
EXPORT_SYMBOL_GPL(wl12xx_cmd_build_probe_req);
struct sk_buff *wl1271_cmd_build_ap_probe_req(struct wl1271 *wl,
struct wl12xx_vif *wlvif,
struct sk_buff *skb)
{
struct ieee80211_vif *vif = wl12xx_wlvif_to_vif(wlvif);
int ret;
u32 rate;
if (!skb)
skb = ieee80211_ap_probereq_get(wl->hw, vif);
if (!skb)
goto out;
wl1271_debug(DEBUG_SCAN, "set ap probe request template");
rate = wl1271_tx_min_rate_get(wl, wlvif->bitrate_masks[wlvif->band]);
if (wlvif->band == NL80211_BAND_2GHZ)
ret = wl1271_cmd_template_set(wl, wlvif->role_id,
CMD_TEMPL_CFG_PROBE_REQ_2_4,
skb->data, skb->len, 0, rate);
else
ret = wl1271_cmd_template_set(wl, wlvif->role_id,
CMD_TEMPL_CFG_PROBE_REQ_5,
skb->data, skb->len, 0, rate);
if (ret < 0)
wl1271_error("Unable to set ap probe request template.");
out:
return skb;
}
int wl1271_cmd_build_arp_rsp(struct wl1271 *wl, struct wl12xx_vif *wlvif)
{
int ret, extra = 0;
u16 fc;
struct ieee80211_vif *vif = wl12xx_wlvif_to_vif(wlvif);
struct sk_buff *skb;
struct wl12xx_arp_rsp_template *tmpl;
struct ieee80211_hdr_3addr *hdr;
struct arphdr *arp_hdr;
skb = dev_alloc_skb(sizeof(*hdr) + sizeof(__le16) + sizeof(*tmpl) +
WL1271_EXTRA_SPACE_MAX);
if (!skb) {
wl1271_error("failed to allocate buffer for arp rsp template");
return -ENOMEM;
}
skb_reserve(skb, sizeof(*hdr) + WL1271_EXTRA_SPACE_MAX);
tmpl = skb_put_zero(skb, sizeof(*tmpl));
/* llc layer */
memcpy(tmpl->llc_hdr, rfc1042_header, sizeof(rfc1042_header));
tmpl->llc_type = cpu_to_be16(ETH_P_ARP);
/* arp header */
arp_hdr = &tmpl->arp_hdr;
wl12xx: fix some sparse warnings Note that wl1271_write32() calls cpu_to_le32() by itself, so calling wl1271_write32(addr, cpu_to_le32(val)) is in fact a bug on BE systems. Fix the following sparse warnings: drivers/net/wireless/wl12xx/cmd.c:662:16: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/cmd.c:662:16: expected unsigned short [unsigned] [addressable] [usertype] llc_type drivers/net/wireless/wl12xx/cmd.c:662:16: got restricted __be16 [usertype] <noident> drivers/net/wireless/wl12xx/cmd.c:674:17: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/cmd.c:674:17: expected unsigned int [unsigned] [addressable] [usertype] sender_ip drivers/net/wireless/wl12xx/cmd.c:674:17: got restricted __be32 [usertype] ip_addr drivers/net/wireless/wl12xx/rx.c:202:4: warning: incorrect type in argument 3 (different base types) drivers/net/wireless/wl12xx/rx.c:202:4: expected unsigned int [unsigned] [usertype] val drivers/net/wireless/wl12xx/rx.c:202:4: got restricted __le32 [usertype] <noident> drivers/net/wireless/wl12xx/acx.c:1247:23: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/acx.c:1247:23: expected restricted __le32 [usertype] ht_capabilites drivers/net/wireless/wl12xx/acx.c:1247:23: got unsigned long drivers/net/wireless/wl12xx/acx.c:1250:24: warning: invalid assignment: |= drivers/net/wireless/wl12xx/acx.c:1250:24: left side has type restricted __le32 drivers/net/wireless/wl12xx/acx.c:1250:24: right side has type unsigned long drivers/net/wireless/wl12xx/acx.c:1253:24: warning: invalid assignment: |= drivers/net/wireless/wl12xx/acx.c:1253:24: left side has type restricted __le32 drivers/net/wireless/wl12xx/acx.c:1253:24: right side has type unsigned long drivers/net/wireless/wl12xx/acx.c:1256:24: warning: invalid assignment: |= drivers/net/wireless/wl12xx/acx.c:1256:24: left side has type restricted __le32 drivers/net/wireless/wl12xx/acx.c:1256:24: right side has type unsigned long Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2010-12-22 04:38:52 -07:00
arp_hdr->ar_hrd = cpu_to_be16(ARPHRD_ETHER);
arp_hdr->ar_pro = cpu_to_be16(ETH_P_IP);
arp_hdr->ar_hln = ETH_ALEN;
arp_hdr->ar_pln = 4;
wl12xx: fix some sparse warnings Note that wl1271_write32() calls cpu_to_le32() by itself, so calling wl1271_write32(addr, cpu_to_le32(val)) is in fact a bug on BE systems. Fix the following sparse warnings: drivers/net/wireless/wl12xx/cmd.c:662:16: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/cmd.c:662:16: expected unsigned short [unsigned] [addressable] [usertype] llc_type drivers/net/wireless/wl12xx/cmd.c:662:16: got restricted __be16 [usertype] <noident> drivers/net/wireless/wl12xx/cmd.c:674:17: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/cmd.c:674:17: expected unsigned int [unsigned] [addressable] [usertype] sender_ip drivers/net/wireless/wl12xx/cmd.c:674:17: got restricted __be32 [usertype] ip_addr drivers/net/wireless/wl12xx/rx.c:202:4: warning: incorrect type in argument 3 (different base types) drivers/net/wireless/wl12xx/rx.c:202:4: expected unsigned int [unsigned] [usertype] val drivers/net/wireless/wl12xx/rx.c:202:4: got restricted __le32 [usertype] <noident> drivers/net/wireless/wl12xx/acx.c:1247:23: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/acx.c:1247:23: expected restricted __le32 [usertype] ht_capabilites drivers/net/wireless/wl12xx/acx.c:1247:23: got unsigned long drivers/net/wireless/wl12xx/acx.c:1250:24: warning: invalid assignment: |= drivers/net/wireless/wl12xx/acx.c:1250:24: left side has type restricted __le32 drivers/net/wireless/wl12xx/acx.c:1250:24: right side has type unsigned long drivers/net/wireless/wl12xx/acx.c:1253:24: warning: invalid assignment: |= drivers/net/wireless/wl12xx/acx.c:1253:24: left side has type restricted __le32 drivers/net/wireless/wl12xx/acx.c:1253:24: right side has type unsigned long drivers/net/wireless/wl12xx/acx.c:1256:24: warning: invalid assignment: |= drivers/net/wireless/wl12xx/acx.c:1256:24: left side has type restricted __le32 drivers/net/wireless/wl12xx/acx.c:1256:24: right side has type unsigned long Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2010-12-22 04:38:52 -07:00
arp_hdr->ar_op = cpu_to_be16(ARPOP_REPLY);
/* arp payload */
memcpy(tmpl->sender_hw, vif->addr, ETH_ALEN);
tmpl->sender_ip = wlvif->ip_addr;
/* encryption space */
switch (wlvif->encryption_type) {
case KEY_TKIP:
if (wl->quirks & WLCORE_QUIRK_TKIP_HEADER_SPACE)
extra = WL1271_EXTRA_SPACE_TKIP;
break;
case KEY_AES:
extra = WL1271_EXTRA_SPACE_AES;
break;
case KEY_NONE:
case KEY_WEP:
case KEY_GEM:
extra = 0;
break;
default:
wl1271_warning("Unknown encryption type: %d",
wlvif->encryption_type);
ret = -EINVAL;
goto out;
}
if (extra) {
u8 *space = skb_push(skb, extra);
memset(space, 0, extra);
}
/* QoS header - BE */
if (wlvif->sta.qos)
memset(skb_push(skb, sizeof(__le16)), 0, sizeof(__le16));
/* mac80211 header */
hdr = skb_push(skb, sizeof(*hdr));
memset(hdr, 0, sizeof(*hdr));
fc = IEEE80211_FTYPE_DATA | IEEE80211_FCTL_TODS;
if (wlvif->sta.qos)
fc |= IEEE80211_STYPE_QOS_DATA;
else
fc |= IEEE80211_STYPE_DATA;
if (wlvif->encryption_type != KEY_NONE)
fc |= IEEE80211_FCTL_PROTECTED;
hdr->frame_control = cpu_to_le16(fc);
memcpy(hdr->addr1, vif->bss_conf.bssid, ETH_ALEN);
memcpy(hdr->addr2, vif->addr, ETH_ALEN);
eth_broadcast_addr(hdr->addr3);
ret = wl1271_cmd_template_set(wl, wlvif->role_id, CMD_TEMPL_ARP_RSP,
skb->data, skb->len, 0,
wlvif->basic_rate);
out:
dev_kfree_skb(skb);
return ret;
}
int wl1271_build_qos_null_data(struct wl1271 *wl, struct ieee80211_vif *vif)
{
struct wl12xx_vif *wlvif = wl12xx_vif_to_data(vif);
struct ieee80211_qos_hdr template;
memset(&template, 0, sizeof(template));
memcpy(template.addr1, vif->bss_conf.bssid, ETH_ALEN);
memcpy(template.addr2, vif->addr, ETH_ALEN);
memcpy(template.addr3, vif->bss_conf.bssid, ETH_ALEN);
template.frame_control = cpu_to_le16(IEEE80211_FTYPE_DATA |
IEEE80211_STYPE_QOS_NULLFUNC |
IEEE80211_FCTL_TODS);
/* FIXME: not sure what priority to use here */
template.qos_ctrl = cpu_to_le16(0);
return wl1271_cmd_template_set(wl, wlvif->role_id,
CMD_TEMPL_QOS_NULL_DATA, &template,
sizeof(template), 0,
wlvif->basic_rate);
}
int wl12xx_cmd_set_default_wep_key(struct wl1271 *wl, u8 id, u8 hlid)
{
struct wl1271_cmd_set_keys *cmd;
int ret = 0;
wl1271_debug(DEBUG_CMD, "cmd set_default_wep_key %d", id);
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
if (!cmd) {
ret = -ENOMEM;
goto out;
}
cmd->hlid = hlid;
cmd->key_id = id;
cmd->lid_key_type = WEP_DEFAULT_LID_TYPE;
cmd->key_action = cpu_to_le16(KEY_SET_ID);
cmd->key_type = KEY_WEP;
ret = wl1271_cmd_send(wl, CMD_SET_KEYS, cmd, sizeof(*cmd), 0);
if (ret < 0) {
wl1271_warning("cmd set_default_wep_key failed: %d", ret);
goto out;
}
out:
kfree(cmd);
return ret;
}
int wl1271_cmd_set_sta_key(struct wl1271 *wl, struct wl12xx_vif *wlvif,
u16 action, u8 id, u8 key_type,
u8 key_size, const u8 *key, const u8 *addr,
u32 tx_seq_32, u16 tx_seq_16)
{
struct wl1271_cmd_set_keys *cmd;
int ret = 0;
/* hlid might have already been deleted */
if (wlvif->sta.hlid == WL12XX_INVALID_LINK_ID)
return 0;
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
if (!cmd) {
ret = -ENOMEM;
goto out;
}
cmd->hlid = wlvif->sta.hlid;
if (key_type == KEY_WEP)
cmd->lid_key_type = WEP_DEFAULT_LID_TYPE;
else if (is_broadcast_ether_addr(addr))
cmd->lid_key_type = BROADCAST_LID_TYPE;
else
cmd->lid_key_type = UNICAST_LID_TYPE;
wl1271: fix endianess issues We were not handling endianess correctly. The wl1271 chip runs on little-endian values. This patch makes sure that all the communication with the wl1271 firmware is done in little-endian by using cpu_to_le* and le*_to_cpu where appropriate. Also, all the struct definitions for data exchanged with the firmware has been changed to use __le16/32 types instead of u16/32. This fixes a few sparse warnings, such as these: drivers/net/wireless/wl12xx/wl1271_cmd.c:554:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:555:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:577:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:579:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:676:18: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:787:22: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:789:21: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_tx.c:98:47: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_acx.c:932:32: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:191:32: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:197:38: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:199:37: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:255:40: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:275:53: warning: incorrect type in assignment (different base types) Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-15 01:33:29 -06:00
cmd->key_action = cpu_to_le16(action);
cmd->key_size = key_size;
cmd->key_type = key_type;
wl1271: fix endianess issues We were not handling endianess correctly. The wl1271 chip runs on little-endian values. This patch makes sure that all the communication with the wl1271 firmware is done in little-endian by using cpu_to_le* and le*_to_cpu where appropriate. Also, all the struct definitions for data exchanged with the firmware has been changed to use __le16/32 types instead of u16/32. This fixes a few sparse warnings, such as these: drivers/net/wireless/wl12xx/wl1271_cmd.c:554:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:555:42: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:577:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:579:58: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:676:18: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:787:22: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_cmd.c:789:21: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_tx.c:98:47: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_acx.c:932:32: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:191:32: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:197:38: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_boot.c:199:37: warning: incorrect type in argument 1 (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:255:40: warning: incorrect type in assignment (different base types) drivers/net/wireless/wl12xx/wl1271_init.c:275:53: warning: incorrect type in assignment (different base types) Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com> Reviewed-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-15 01:33:29 -06:00
cmd->ac_seq_num16[0] = cpu_to_le16(tx_seq_16);
cmd->ac_seq_num32[0] = cpu_to_le32(tx_seq_32);
cmd->key_id = id;
if (key_type == KEY_TKIP) {
/*
* We get the key in the following form:
* TKIP (16 bytes) - TX MIC (8 bytes) - RX MIC (8 bytes)
* but the target is expecting:
* TKIP - RX MIC - TX MIC
*/
memcpy(cmd->key, key, 16);
memcpy(cmd->key + 16, key + 24, 8);
memcpy(cmd->key + 24, key + 16, 8);
} else {
memcpy(cmd->key, key, key_size);
}
wl1271_dump(DEBUG_CRYPT, "TARGET KEY: ", cmd, sizeof(*cmd));
ret = wl1271_cmd_send(wl, CMD_SET_KEYS, cmd, sizeof(*cmd), 0);
if (ret < 0) {
wl1271_warning("could not set keys");
goto out;
}
out:
kfree(cmd);
return ret;
}
/*
* TODO: merge with sta/ibss into 1 set_key function.
* note there are slight diffs
*/
int wl1271_cmd_set_ap_key(struct wl1271 *wl, struct wl12xx_vif *wlvif,
u16 action, u8 id, u8 key_type,
u8 key_size, const u8 *key, u8 hlid, u32 tx_seq_32,
u16 tx_seq_16)
{
struct wl1271_cmd_set_keys *cmd;
int ret = 0;
u8 lid_type;
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
if (!cmd)
return -ENOMEM;
if (hlid == wlvif->ap.bcast_hlid) {
if (key_type == KEY_WEP)
lid_type = WEP_DEFAULT_LID_TYPE;
else
lid_type = BROADCAST_LID_TYPE;
} else {
lid_type = UNICAST_LID_TYPE;
}
wl1271_debug(DEBUG_CRYPT, "ap key action: %d id: %d lid: %d type: %d"
" hlid: %d", (int)action, (int)id, (int)lid_type,
(int)key_type, (int)hlid);
cmd->lid_key_type = lid_type;
cmd->hlid = hlid;
cmd->key_action = cpu_to_le16(action);
cmd->key_size = key_size;
cmd->key_type = key_type;
cmd->key_id = id;
cmd->ac_seq_num16[0] = cpu_to_le16(tx_seq_16);
cmd->ac_seq_num32[0] = cpu_to_le32(tx_seq_32);
if (key_type == KEY_TKIP) {
/*
* We get the key in the following form:
* TKIP (16 bytes) - TX MIC (8 bytes) - RX MIC (8 bytes)
* but the target is expecting:
* TKIP - RX MIC - TX MIC
*/
memcpy(cmd->key, key, 16);
memcpy(cmd->key + 16, key + 24, 8);
memcpy(cmd->key + 24, key + 16, 8);
} else {
memcpy(cmd->key, key, key_size);
}
wl1271_dump(DEBUG_CRYPT, "TARGET AP KEY: ", cmd, sizeof(*cmd));
ret = wl1271_cmd_send(wl, CMD_SET_KEYS, cmd, sizeof(*cmd), 0);
if (ret < 0) {
wl1271_warning("could not set ap keys");
goto out;
}
out:
kfree(cmd);
return ret;
}
int wl12xx_cmd_set_peer_state(struct wl1271 *wl, struct wl12xx_vif *wlvif,
u8 hlid)
{
struct wl12xx_cmd_set_peer_state *cmd;
int ret = 0;
wl1271_debug(DEBUG_CMD, "cmd set peer state (hlid=%d)", hlid);
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
if (!cmd) {
ret = -ENOMEM;
goto out;
}
cmd->hlid = hlid;
cmd->state = WL1271_CMD_STA_STATE_CONNECTED;
/* wmm param is valid only for station role */
if (wlvif->bss_type == BSS_TYPE_STA_BSS)
cmd->wmm = wlvif->wmm_enabled;
ret = wl1271_cmd_send(wl, CMD_SET_PEER_STATE, cmd, sizeof(*cmd), 0);
if (ret < 0) {
wl1271_error("failed to send set peer state command");
goto out_free;
}
out_free:
kfree(cmd);
out:
return ret;
}
int wl12xx_cmd_add_peer(struct wl1271 *wl, struct wl12xx_vif *wlvif,
struct ieee80211_sta *sta, u8 hlid)
{
struct wl12xx_cmd_add_peer *cmd;
int i, ret;
u32 sta_rates;
wl1271_debug(DEBUG_CMD, "cmd add peer %d", (int)hlid);
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
if (!cmd) {
ret = -ENOMEM;
goto out;
}
memcpy(cmd->addr, sta->addr, ETH_ALEN);
cmd->bss_index = WL1271_AP_BSS_INDEX;
cmd->aid = sta->aid;
cmd->hlid = hlid;
cmd->sp_len = sta->max_sp;
cmd->wmm = sta->wme ? 1 : 0;
cmd->session_id = wl->session_ids[hlid];
cmd->role_id = wlvif->role_id;
for (i = 0; i < NUM_ACCESS_CATEGORIES_COPY; i++)
if (sta->wme && (sta->uapsd_queues & BIT(i)))
cmd->psd_type[NUM_ACCESS_CATEGORIES_COPY-1-i] =
WL1271_PSD_UPSD_TRIGGER;
else
cmd->psd_type[NUM_ACCESS_CATEGORIES_COPY-1-i] =
WL1271_PSD_LEGACY;
sta_rates = sta->supp_rates[wlvif->band];
if (sta->ht_cap.ht_supported)
sta_rates |=
(sta->ht_cap.mcs.rx_mask[0] << HW_HT_RATES_OFFSET) |
(sta->ht_cap.mcs.rx_mask[1] << HW_MIMO_RATES_OFFSET);
cmd->supported_rates =
cpu_to_le32(wl1271_tx_enabled_rates_get(wl, sta_rates,
wlvif->band));
if (!cmd->supported_rates) {
wl1271_debug(DEBUG_CMD,
"peer has no supported rates yet, configuring basic rates: 0x%x",
wlvif->basic_rate_set);
cmd->supported_rates = cpu_to_le32(wlvif->basic_rate_set);
}
wl1271_debug(DEBUG_CMD, "new peer rates=0x%x queues=0x%x",
cmd->supported_rates, sta->uapsd_queues);
ret = wl1271_cmd_send(wl, CMD_ADD_PEER, cmd, sizeof(*cmd), 0);
if (ret < 0) {
wl1271_error("failed to initiate cmd add peer");
goto out_free;
}
out_free:
kfree(cmd);
out:
return ret;
}
int wl12xx_cmd_remove_peer(struct wl1271 *wl, struct wl12xx_vif *wlvif,
u8 hlid)
{
struct wl12xx_cmd_remove_peer *cmd;
int ret;
bool timeout = false;
wl1271_debug(DEBUG_CMD, "cmd remove peer %d", (int)hlid);
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
if (!cmd) {
ret = -ENOMEM;
goto out;
}
cmd->hlid = hlid;
/* We never send a deauth, mac80211 is in charge of this */
cmd->reason_opcode = 0;
cmd->send_deauth_flag = 0;
cmd->role_id = wlvif->role_id;
ret = wl1271_cmd_send(wl, CMD_REMOVE_PEER, cmd, sizeof(*cmd), 0);
if (ret < 0) {
wl1271_error("failed to initiate cmd remove peer");
goto out_free;
}
ret = wl->ops->wait_for_event(wl,
WLCORE_EVENT_PEER_REMOVE_COMPLETE,
&timeout);
/*
* We are ok with a timeout here. The event is sometimes not sent
* due to a firmware bug. In case of another error (like SDIO timeout)
* queue a recovery.
*/
if (ret)
wl12xx_queue_recovery_work(wl);
out_free:
kfree(cmd);
out:
return ret;
}
static int wlcore_get_reg_conf_ch_idx(enum nl80211_band band, u16 ch)
wlcore: add new reg-domain configuration command In 18xx the calibration process of the PHY Cortex domain requires to perform an active calibration of the channel before it can be used for transmission. To fulfill world wide regulatory restrictions, fw should be always synchronized/updated with current CRDA configuration. Add a new "CMD_DFS_CHANNEL_CONFIG" command to update the fw with current reg-domain, this command passes a bit map of channels that are allowed to be used for transmission. The driver shall update the fw during initialization and after each change in the current reg-domain configuration. The driver will save the channel number of incoming beacons during the scan process, as they might be a result of the passive scan on "IEEE80211_CHAN_PASSIVE_SCAN" channel and will update the fw accordingly once the scan is finished, the purpose of this is to be ready in case of the authentication request on one of these disabled (uncalibrated) channels. The new command requires to wait for the fw completion event "DFS_CHANNELS_CONFIG_COMPLETE_EVENT". No scan commands (including the sched scan) can be executed concurrently with the "CMD_DFS_CHANNEL_CONFIG", wl->mutex ensures that. [Arik - move reset of reg_ch_conf_last to safe place inside op_stop_locked] [Eliad - adjust to new event waiting api] Signed-off-by: Victor Goldenshtein <victorg@ti.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-11-25 09:26:59 -07:00
{
/*
* map the given band/channel to the respective predefined
* bit expected by the fw
*/
wlcore: add new reg-domain configuration command In 18xx the calibration process of the PHY Cortex domain requires to perform an active calibration of the channel before it can be used for transmission. To fulfill world wide regulatory restrictions, fw should be always synchronized/updated with current CRDA configuration. Add a new "CMD_DFS_CHANNEL_CONFIG" command to update the fw with current reg-domain, this command passes a bit map of channels that are allowed to be used for transmission. The driver shall update the fw during initialization and after each change in the current reg-domain configuration. The driver will save the channel number of incoming beacons during the scan process, as they might be a result of the passive scan on "IEEE80211_CHAN_PASSIVE_SCAN" channel and will update the fw accordingly once the scan is finished, the purpose of this is to be ready in case of the authentication request on one of these disabled (uncalibrated) channels. The new command requires to wait for the fw completion event "DFS_CHANNELS_CONFIG_COMPLETE_EVENT". No scan commands (including the sched scan) can be executed concurrently with the "CMD_DFS_CHANNEL_CONFIG", wl->mutex ensures that. [Arik - move reset of reg_ch_conf_last to safe place inside op_stop_locked] [Eliad - adjust to new event waiting api] Signed-off-by: Victor Goldenshtein <victorg@ti.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-11-25 09:26:59 -07:00
switch (band) {
case NL80211_BAND_2GHZ:
/* channels 1..14 are mapped to 0..13 */
wlcore: add new reg-domain configuration command In 18xx the calibration process of the PHY Cortex domain requires to perform an active calibration of the channel before it can be used for transmission. To fulfill world wide regulatory restrictions, fw should be always synchronized/updated with current CRDA configuration. Add a new "CMD_DFS_CHANNEL_CONFIG" command to update the fw with current reg-domain, this command passes a bit map of channels that are allowed to be used for transmission. The driver shall update the fw during initialization and after each change in the current reg-domain configuration. The driver will save the channel number of incoming beacons during the scan process, as they might be a result of the passive scan on "IEEE80211_CHAN_PASSIVE_SCAN" channel and will update the fw accordingly once the scan is finished, the purpose of this is to be ready in case of the authentication request on one of these disabled (uncalibrated) channels. The new command requires to wait for the fw completion event "DFS_CHANNELS_CONFIG_COMPLETE_EVENT". No scan commands (including the sched scan) can be executed concurrently with the "CMD_DFS_CHANNEL_CONFIG", wl->mutex ensures that. [Arik - move reset of reg_ch_conf_last to safe place inside op_stop_locked] [Eliad - adjust to new event waiting api] Signed-off-by: Victor Goldenshtein <victorg@ti.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-11-25 09:26:59 -07:00
if (ch >= 1 && ch <= 14)
return ch - 1;
break;
case NL80211_BAND_5GHZ:
switch (ch) {
case 8 ... 16:
/* channels 8,12,16 are mapped to 18,19,20 */
return 18 + (ch-8)/4;
case 34 ... 48:
/* channels 34,36..48 are mapped to 21..28 */
return 21 + (ch-34)/2;
case 52 ... 64:
/* channels 52,56..64 are mapped to 29..32 */
return 29 + (ch-52)/4;
case 100 ... 140:
/* channels 100,104..140 are mapped to 33..43 */
return 33 + (ch-100)/4;
case 149 ... 165:
/* channels 149,153..165 are mapped to 44..48 */
return 44 + (ch-149)/4;
default:
break;
}
wlcore: add new reg-domain configuration command In 18xx the calibration process of the PHY Cortex domain requires to perform an active calibration of the channel before it can be used for transmission. To fulfill world wide regulatory restrictions, fw should be always synchronized/updated with current CRDA configuration. Add a new "CMD_DFS_CHANNEL_CONFIG" command to update the fw with current reg-domain, this command passes a bit map of channels that are allowed to be used for transmission. The driver shall update the fw during initialization and after each change in the current reg-domain configuration. The driver will save the channel number of incoming beacons during the scan process, as they might be a result of the passive scan on "IEEE80211_CHAN_PASSIVE_SCAN" channel and will update the fw accordingly once the scan is finished, the purpose of this is to be ready in case of the authentication request on one of these disabled (uncalibrated) channels. The new command requires to wait for the fw completion event "DFS_CHANNELS_CONFIG_COMPLETE_EVENT". No scan commands (including the sched scan) can be executed concurrently with the "CMD_DFS_CHANNEL_CONFIG", wl->mutex ensures that. [Arik - move reset of reg_ch_conf_last to safe place inside op_stop_locked] [Eliad - adjust to new event waiting api] Signed-off-by: Victor Goldenshtein <victorg@ti.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-11-25 09:26:59 -07:00
break;
default:
break;
wlcore: add new reg-domain configuration command In 18xx the calibration process of the PHY Cortex domain requires to perform an active calibration of the channel before it can be used for transmission. To fulfill world wide regulatory restrictions, fw should be always synchronized/updated with current CRDA configuration. Add a new "CMD_DFS_CHANNEL_CONFIG" command to update the fw with current reg-domain, this command passes a bit map of channels that are allowed to be used for transmission. The driver shall update the fw during initialization and after each change in the current reg-domain configuration. The driver will save the channel number of incoming beacons during the scan process, as they might be a result of the passive scan on "IEEE80211_CHAN_PASSIVE_SCAN" channel and will update the fw accordingly once the scan is finished, the purpose of this is to be ready in case of the authentication request on one of these disabled (uncalibrated) channels. The new command requires to wait for the fw completion event "DFS_CHANNELS_CONFIG_COMPLETE_EVENT". No scan commands (including the sched scan) can be executed concurrently with the "CMD_DFS_CHANNEL_CONFIG", wl->mutex ensures that. [Arik - move reset of reg_ch_conf_last to safe place inside op_stop_locked] [Eliad - adjust to new event waiting api] Signed-off-by: Victor Goldenshtein <victorg@ti.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-11-25 09:26:59 -07:00
}
wl1271_error("%s: unknown band/channel: %d/%d", __func__, band, ch);
return -1;
wlcore: add new reg-domain configuration command In 18xx the calibration process of the PHY Cortex domain requires to perform an active calibration of the channel before it can be used for transmission. To fulfill world wide regulatory restrictions, fw should be always synchronized/updated with current CRDA configuration. Add a new "CMD_DFS_CHANNEL_CONFIG" command to update the fw with current reg-domain, this command passes a bit map of channels that are allowed to be used for transmission. The driver shall update the fw during initialization and after each change in the current reg-domain configuration. The driver will save the channel number of incoming beacons during the scan process, as they might be a result of the passive scan on "IEEE80211_CHAN_PASSIVE_SCAN" channel and will update the fw accordingly once the scan is finished, the purpose of this is to be ready in case of the authentication request on one of these disabled (uncalibrated) channels. The new command requires to wait for the fw completion event "DFS_CHANNELS_CONFIG_COMPLETE_EVENT". No scan commands (including the sched scan) can be executed concurrently with the "CMD_DFS_CHANNEL_CONFIG", wl->mutex ensures that. [Arik - move reset of reg_ch_conf_last to safe place inside op_stop_locked] [Eliad - adjust to new event waiting api] Signed-off-by: Victor Goldenshtein <victorg@ti.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-11-25 09:26:59 -07:00
}
void wlcore_set_pending_regdomain_ch(struct wl1271 *wl, u16 channel,
enum nl80211_band band)
wlcore: add new reg-domain configuration command In 18xx the calibration process of the PHY Cortex domain requires to perform an active calibration of the channel before it can be used for transmission. To fulfill world wide regulatory restrictions, fw should be always synchronized/updated with current CRDA configuration. Add a new "CMD_DFS_CHANNEL_CONFIG" command to update the fw with current reg-domain, this command passes a bit map of channels that are allowed to be used for transmission. The driver shall update the fw during initialization and after each change in the current reg-domain configuration. The driver will save the channel number of incoming beacons during the scan process, as they might be a result of the passive scan on "IEEE80211_CHAN_PASSIVE_SCAN" channel and will update the fw accordingly once the scan is finished, the purpose of this is to be ready in case of the authentication request on one of these disabled (uncalibrated) channels. The new command requires to wait for the fw completion event "DFS_CHANNELS_CONFIG_COMPLETE_EVENT". No scan commands (including the sched scan) can be executed concurrently with the "CMD_DFS_CHANNEL_CONFIG", wl->mutex ensures that. [Arik - move reset of reg_ch_conf_last to safe place inside op_stop_locked] [Eliad - adjust to new event waiting api] Signed-off-by: Victor Goldenshtein <victorg@ti.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-11-25 09:26:59 -07:00
{
int ch_bit_idx = 0;
if (!(wl->quirks & WLCORE_QUIRK_REGDOMAIN_CONF))
return;
ch_bit_idx = wlcore_get_reg_conf_ch_idx(band, channel);
if (ch_bit_idx >= 0 && ch_bit_idx <= WL1271_MAX_CHANNELS)
wlcore: add new reg-domain configuration command In 18xx the calibration process of the PHY Cortex domain requires to perform an active calibration of the channel before it can be used for transmission. To fulfill world wide regulatory restrictions, fw should be always synchronized/updated with current CRDA configuration. Add a new "CMD_DFS_CHANNEL_CONFIG" command to update the fw with current reg-domain, this command passes a bit map of channels that are allowed to be used for transmission. The driver shall update the fw during initialization and after each change in the current reg-domain configuration. The driver will save the channel number of incoming beacons during the scan process, as they might be a result of the passive scan on "IEEE80211_CHAN_PASSIVE_SCAN" channel and will update the fw accordingly once the scan is finished, the purpose of this is to be ready in case of the authentication request on one of these disabled (uncalibrated) channels. The new command requires to wait for the fw completion event "DFS_CHANNELS_CONFIG_COMPLETE_EVENT". No scan commands (including the sched scan) can be executed concurrently with the "CMD_DFS_CHANNEL_CONFIG", wl->mutex ensures that. [Arik - move reset of reg_ch_conf_last to safe place inside op_stop_locked] [Eliad - adjust to new event waiting api] Signed-off-by: Victor Goldenshtein <victorg@ti.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-11-25 09:26:59 -07:00
set_bit(ch_bit_idx, (long *)wl->reg_ch_conf_pending);
}
int wlcore_cmd_regdomain_config_locked(struct wl1271 *wl)
{
struct wl12xx_cmd_regdomain_dfs_config *cmd = NULL;
int ret = 0, i, b, ch_bit_idx;
u32 tmp_ch_bitmap[2];
struct wiphy *wiphy = wl->hw->wiphy;
struct ieee80211_supported_band *band;
bool timeout = false;
if (!(wl->quirks & WLCORE_QUIRK_REGDOMAIN_CONF))
return 0;
wl1271_debug(DEBUG_CMD, "cmd reg domain config");
memset(tmp_ch_bitmap, 0, sizeof(tmp_ch_bitmap));
for (b = NL80211_BAND_2GHZ; b <= NL80211_BAND_5GHZ; b++) {
wlcore: add new reg-domain configuration command In 18xx the calibration process of the PHY Cortex domain requires to perform an active calibration of the channel before it can be used for transmission. To fulfill world wide regulatory restrictions, fw should be always synchronized/updated with current CRDA configuration. Add a new "CMD_DFS_CHANNEL_CONFIG" command to update the fw with current reg-domain, this command passes a bit map of channels that are allowed to be used for transmission. The driver shall update the fw during initialization and after each change in the current reg-domain configuration. The driver will save the channel number of incoming beacons during the scan process, as they might be a result of the passive scan on "IEEE80211_CHAN_PASSIVE_SCAN" channel and will update the fw accordingly once the scan is finished, the purpose of this is to be ready in case of the authentication request on one of these disabled (uncalibrated) channels. The new command requires to wait for the fw completion event "DFS_CHANNELS_CONFIG_COMPLETE_EVENT". No scan commands (including the sched scan) can be executed concurrently with the "CMD_DFS_CHANNEL_CONFIG", wl->mutex ensures that. [Arik - move reset of reg_ch_conf_last to safe place inside op_stop_locked] [Eliad - adjust to new event waiting api] Signed-off-by: Victor Goldenshtein <victorg@ti.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-11-25 09:26:59 -07:00
band = wiphy->bands[b];
for (i = 0; i < band->n_channels; i++) {
struct ieee80211_channel *channel = &band->channels[i];
u16 ch = channel->hw_value;
u32 flags = channel->flags;
wlcore: add new reg-domain configuration command In 18xx the calibration process of the PHY Cortex domain requires to perform an active calibration of the channel before it can be used for transmission. To fulfill world wide regulatory restrictions, fw should be always synchronized/updated with current CRDA configuration. Add a new "CMD_DFS_CHANNEL_CONFIG" command to update the fw with current reg-domain, this command passes a bit map of channels that are allowed to be used for transmission. The driver shall update the fw during initialization and after each change in the current reg-domain configuration. The driver will save the channel number of incoming beacons during the scan process, as they might be a result of the passive scan on "IEEE80211_CHAN_PASSIVE_SCAN" channel and will update the fw accordingly once the scan is finished, the purpose of this is to be ready in case of the authentication request on one of these disabled (uncalibrated) channels. The new command requires to wait for the fw completion event "DFS_CHANNELS_CONFIG_COMPLETE_EVENT". No scan commands (including the sched scan) can be executed concurrently with the "CMD_DFS_CHANNEL_CONFIG", wl->mutex ensures that. [Arik - move reset of reg_ch_conf_last to safe place inside op_stop_locked] [Eliad - adjust to new event waiting api] Signed-off-by: Victor Goldenshtein <victorg@ti.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-11-25 09:26:59 -07:00
if (flags & (IEEE80211_CHAN_DISABLED |
IEEE80211_CHAN_NO_IR))
continue;
if ((flags & IEEE80211_CHAN_RADAR) &&
channel->dfs_state != NL80211_DFS_AVAILABLE)
wlcore: add new reg-domain configuration command In 18xx the calibration process of the PHY Cortex domain requires to perform an active calibration of the channel before it can be used for transmission. To fulfill world wide regulatory restrictions, fw should be always synchronized/updated with current CRDA configuration. Add a new "CMD_DFS_CHANNEL_CONFIG" command to update the fw with current reg-domain, this command passes a bit map of channels that are allowed to be used for transmission. The driver shall update the fw during initialization and after each change in the current reg-domain configuration. The driver will save the channel number of incoming beacons during the scan process, as they might be a result of the passive scan on "IEEE80211_CHAN_PASSIVE_SCAN" channel and will update the fw accordingly once the scan is finished, the purpose of this is to be ready in case of the authentication request on one of these disabled (uncalibrated) channels. The new command requires to wait for the fw completion event "DFS_CHANNELS_CONFIG_COMPLETE_EVENT". No scan commands (including the sched scan) can be executed concurrently with the "CMD_DFS_CHANNEL_CONFIG", wl->mutex ensures that. [Arik - move reset of reg_ch_conf_last to safe place inside op_stop_locked] [Eliad - adjust to new event waiting api] Signed-off-by: Victor Goldenshtein <victorg@ti.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-11-25 09:26:59 -07:00
continue;
ch_bit_idx = wlcore_get_reg_conf_ch_idx(b, ch);
if (ch_bit_idx < 0)
continue;
set_bit(ch_bit_idx, (long *)tmp_ch_bitmap);
}
}
tmp_ch_bitmap[0] |= wl->reg_ch_conf_pending[0];
tmp_ch_bitmap[1] |= wl->reg_ch_conf_pending[1];
if (!memcmp(tmp_ch_bitmap, wl->reg_ch_conf_last, sizeof(tmp_ch_bitmap)))
goto out;
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
if (!cmd) {
ret = -ENOMEM;
goto out;
}
cmd->ch_bit_map1 = cpu_to_le32(tmp_ch_bitmap[0]);
cmd->ch_bit_map2 = cpu_to_le32(tmp_ch_bitmap[1]);
cmd->dfs_region = wl->dfs_region;
wlcore: add new reg-domain configuration command In 18xx the calibration process of the PHY Cortex domain requires to perform an active calibration of the channel before it can be used for transmission. To fulfill world wide regulatory restrictions, fw should be always synchronized/updated with current CRDA configuration. Add a new "CMD_DFS_CHANNEL_CONFIG" command to update the fw with current reg-domain, this command passes a bit map of channels that are allowed to be used for transmission. The driver shall update the fw during initialization and after each change in the current reg-domain configuration. The driver will save the channel number of incoming beacons during the scan process, as they might be a result of the passive scan on "IEEE80211_CHAN_PASSIVE_SCAN" channel and will update the fw accordingly once the scan is finished, the purpose of this is to be ready in case of the authentication request on one of these disabled (uncalibrated) channels. The new command requires to wait for the fw completion event "DFS_CHANNELS_CONFIG_COMPLETE_EVENT". No scan commands (including the sched scan) can be executed concurrently with the "CMD_DFS_CHANNEL_CONFIG", wl->mutex ensures that. [Arik - move reset of reg_ch_conf_last to safe place inside op_stop_locked] [Eliad - adjust to new event waiting api] Signed-off-by: Victor Goldenshtein <victorg@ti.com> Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Luciano Coelho <coelho@ti.com>
2012-11-25 09:26:59 -07:00
wl1271_debug(DEBUG_CMD,
"cmd reg domain bitmap1: 0x%08x, bitmap2: 0x%08x",
cmd->ch_bit_map1, cmd->ch_bit_map2);
ret = wl1271_cmd_send(wl, CMD_DFS_CHANNEL_CONFIG, cmd, sizeof(*cmd), 0);
if (ret < 0) {
wl1271_error("failed to send reg domain dfs config");
goto out;
}
ret = wl->ops->wait_for_event(wl,
WLCORE_EVENT_DFS_CONFIG_COMPLETE,
&timeout);
if (ret < 0 || timeout) {
wl1271_error("reg domain conf %serror",
timeout ? "completion " : "");
ret = timeout ? -ETIMEDOUT : ret;
goto out;
}
memcpy(wl->reg_ch_conf_last, tmp_ch_bitmap, sizeof(tmp_ch_bitmap));
memset(wl->reg_ch_conf_pending, 0, sizeof(wl->reg_ch_conf_pending));
out:
kfree(cmd);
return ret;
}
int wl12xx_cmd_config_fwlog(struct wl1271 *wl)
{
struct wl12xx_cmd_config_fwlog *cmd;
int ret = 0;
wl1271_debug(DEBUG_CMD, "cmd config firmware logger");
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
if (!cmd) {
ret = -ENOMEM;
goto out;
}
cmd->logger_mode = wl->conf.fwlog.mode;
cmd->log_severity = wl->conf.fwlog.severity;
cmd->timestamp = wl->conf.fwlog.timestamp;
cmd->output = wl->conf.fwlog.output;
cmd->threshold = wl->conf.fwlog.threshold;
ret = wl1271_cmd_send(wl, CMD_CONFIG_FWLOGGER, cmd, sizeof(*cmd), 0);
if (ret < 0) {
wl1271_error("failed to send config firmware logger command");
goto out_free;
}
out_free:
kfree(cmd);
out:
return ret;
}
int wl12xx_cmd_start_fwlog(struct wl1271 *wl)
{
struct wl12xx_cmd_start_fwlog *cmd;
int ret = 0;
wl1271_debug(DEBUG_CMD, "cmd start firmware logger");
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
if (!cmd) {
ret = -ENOMEM;
goto out;
}
ret = wl1271_cmd_send(wl, CMD_START_FWLOGGER, cmd, sizeof(*cmd), 0);
if (ret < 0) {
wl1271_error("failed to send start firmware logger command");
goto out_free;
}
out_free:
kfree(cmd);
out:
return ret;
}
int wl12xx_cmd_stop_fwlog(struct wl1271 *wl)
{
struct wl12xx_cmd_stop_fwlog *cmd;
int ret = 0;
wl1271_debug(DEBUG_CMD, "cmd stop firmware logger");
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
if (!cmd) {
ret = -ENOMEM;
goto out;
}
ret = wl1271_cmd_send(wl, CMD_STOP_FWLOGGER, cmd, sizeof(*cmd), 0);
if (ret < 0) {
wl1271_error("failed to send stop firmware logger command");
goto out_free;
}
out_free:
kfree(cmd);
out:
return ret;
}
static int wl12xx_cmd_roc(struct wl1271 *wl, struct wl12xx_vif *wlvif,
u8 role_id, enum nl80211_band band, u8 channel)
{
struct wl12xx_cmd_roc *cmd;
int ret = 0;
wl1271_debug(DEBUG_CMD, "cmd roc %d (%d)", channel, role_id);
if (WARN_ON(role_id == WL12XX_INVALID_ROLE_ID))
return -EINVAL;
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
if (!cmd) {
ret = -ENOMEM;
goto out;
}
cmd->role_id = role_id;
cmd->channel = channel;
switch (band) {
case NL80211_BAND_2GHZ:
cmd->band = WLCORE_BAND_2_4GHZ;
break;
case NL80211_BAND_5GHZ:
cmd->band = WLCORE_BAND_5GHZ;
break;
default:
wl1271_error("roc - unknown band: %d", (int)wlvif->band);
ret = -EINVAL;
goto out_free;
}
ret = wl1271_cmd_send(wl, CMD_REMAIN_ON_CHANNEL, cmd, sizeof(*cmd), 0);
if (ret < 0) {
wl1271_error("failed to send ROC command");
goto out_free;
}
out_free:
kfree(cmd);
out:
return ret;
}
static int wl12xx_cmd_croc(struct wl1271 *wl, u8 role_id)
{
struct wl12xx_cmd_croc *cmd;
int ret = 0;
wl1271_debug(DEBUG_CMD, "cmd croc (%d)", role_id);
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
if (!cmd) {
ret = -ENOMEM;
goto out;
}
cmd->role_id = role_id;
ret = wl1271_cmd_send(wl, CMD_CANCEL_REMAIN_ON_CHANNEL, cmd,
sizeof(*cmd), 0);
if (ret < 0) {
wl1271_error("failed to send ROC command");
goto out_free;
}
out_free:
kfree(cmd);
out:
return ret;
}
int wl12xx_roc(struct wl1271 *wl, struct wl12xx_vif *wlvif, u8 role_id,
enum nl80211_band band, u8 channel)
{
int ret = 0;
if (WARN_ON(test_bit(role_id, wl->roc_map)))
return 0;
ret = wl12xx_cmd_roc(wl, wlvif, role_id, band, channel);
if (ret < 0)
goto out;
__set_bit(role_id, wl->roc_map);
out:
return ret;
}
int wl12xx_croc(struct wl1271 *wl, u8 role_id)
{
int ret = 0;
if (WARN_ON(!test_bit(role_id, wl->roc_map)))
return 0;
ret = wl12xx_cmd_croc(wl, role_id);
if (ret < 0)
goto out;
__clear_bit(role_id, wl->roc_map);
/*
* Rearm the tx watchdog when removing the last ROC. This prevents
* recoveries due to just finished ROCs - when Tx hasn't yet had
* a chance to get out.
*/
if (find_first_bit(wl->roc_map, WL12XX_MAX_ROLES) >= WL12XX_MAX_ROLES)
wl12xx_rearm_tx_watchdog_locked(wl);
out:
return ret;
}
int wl12xx_cmd_stop_channel_switch(struct wl1271 *wl, struct wl12xx_vif *wlvif)
{
struct wl12xx_cmd_stop_channel_switch *cmd;
int ret;
wl1271_debug(DEBUG_ACX, "cmd stop channel switch");
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
if (!cmd) {
ret = -ENOMEM;
goto out;
}
cmd->role_id = wlvif->role_id;
ret = wl1271_cmd_send(wl, CMD_STOP_CHANNEL_SWICTH, cmd, sizeof(*cmd), 0);
if (ret < 0) {
wl1271_error("failed to stop channel switch command");
goto out_free;
}
out_free:
kfree(cmd);
out:
return ret;
}
/* start dev role and roc on its channel */
int wl12xx_start_dev(struct wl1271 *wl, struct wl12xx_vif *wlvif,
enum nl80211_band band, int channel)
{
int ret;
if (WARN_ON(!(wlvif->bss_type == BSS_TYPE_STA_BSS ||
wlvif->bss_type == BSS_TYPE_IBSS)))
return -EINVAL;
/* the dev role is already started for p2p mgmt interfaces */
if (!wlcore_is_p2p_mgmt(wlvif)) {
ret = wl12xx_cmd_role_enable(wl,
wl12xx_wlvif_to_vif(wlvif)->addr,
WL1271_ROLE_DEVICE,
&wlvif->dev_role_id);
if (ret < 0)
goto out;
}
ret = wl12xx_cmd_role_start_dev(wl, wlvif, band, channel);
if (ret < 0)
goto out_disable;
ret = wl12xx_roc(wl, wlvif, wlvif->dev_role_id, band, channel);
if (ret < 0)
goto out_stop;
return 0;
out_stop:
wl12xx_cmd_role_stop_dev(wl, wlvif);
out_disable:
if (!wlcore_is_p2p_mgmt(wlvif))
wl12xx_cmd_role_disable(wl, &wlvif->dev_role_id);
out:
return ret;
}
/* croc dev hlid, and stop the role */
int wl12xx_stop_dev(struct wl1271 *wl, struct wl12xx_vif *wlvif)
{
int ret;
if (WARN_ON(!(wlvif->bss_type == BSS_TYPE_STA_BSS ||
wlvif->bss_type == BSS_TYPE_IBSS)))
return -EINVAL;
/* flush all pending packets */
ret = wlcore_tx_work_locked(wl);
if (ret < 0)
goto out;
if (test_bit(wlvif->dev_role_id, wl->roc_map)) {
ret = wl12xx_croc(wl, wlvif->dev_role_id);
if (ret < 0)
goto out;
}
ret = wl12xx_cmd_role_stop_dev(wl, wlvif);
if (ret < 0)
goto out;
if (!wlcore_is_p2p_mgmt(wlvif)) {
ret = wl12xx_cmd_role_disable(wl, &wlvif->dev_role_id);
if (ret < 0)
goto out;
}
out:
return ret;
}
int wlcore_cmd_generic_cfg(struct wl1271 *wl, struct wl12xx_vif *wlvif,
u8 feature, u8 enable, u8 value)
{
struct wlcore_cmd_generic_cfg *cmd;
int ret;
wl1271_debug(DEBUG_CMD,
"cmd generic cfg (role %d feature %d enable %d value %d)",
wlvif->role_id, feature, enable, value);
cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
if (!cmd)
return -ENOMEM;
cmd->role_id = wlvif->role_id;
cmd->feature = feature;
cmd->enable = enable;
cmd->value = value;
ret = wl1271_cmd_send(wl, CMD_GENERIC_CFG, cmd, sizeof(*cmd), 0);
if (ret < 0) {
wl1271_error("failed to send generic cfg command");
goto out_free;
}
out_free:
kfree(cmd);
return ret;
}
EXPORT_SYMBOL_GPL(wlcore_cmd_generic_cfg);