redonkable
/
remarkable-linux
1
0
Fork 0
Code Releases Activity
remarkable-linux/drivers/nvdimm/nd-core.h

128 lines
4.8 KiB
C
Raw Normal View History

libnvdimm, nfit: initial libnvdimm infrastructure and NFIT support A struct nvdimm_bus is the anchor device for registering nvdimm resources and interfaces, for example, a character control device, nvdimm devices, and I/O region devices. The ACPI NFIT (NVDIMM Firmware Interface Table) is one possible platform description for such non-volatile memory resources in a system. The nfit.ko driver attaches to the "ACPI0012" device that indicates the presence of the NFIT and parses the table to register a struct nvdimm_bus instance. Cc: <linux-acpi@vger.kernel.org> Cc: Lv Zheng <lv.zheng@intel.com> Cc: Robert Moore <robert.moore@intel.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-05-19 20:54:31 -06:00
/*
* Copyright(c) 2013-2015 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*/
#ifndef __ND_CORE_H__
#define __ND_CORE_H__
#include <linux/libnvdimm.h>
#include <linux/device.h>
libnvdimm, nfit: add interleave-set state-tracking infrastructure On platforms that have firmware support for reading/writing per-dimm label space, a portion of the dimm may be accessible via an interleave set PMEM mapping in addition to the dimm's BLK (block-data-window aperture(s)) interface. A label, stored in a "configuration data region" on the dimm, disambiguates which dimm addresses are accessed through which exclusive interface. Add infrastructure that allows the kernel to block modifications to a label in the set while any member dimm is active. Note that this is meant only for enforcing "no modifications of active labels" via the coarse ioctl command. Adding/deleting namespaces from an active interleave set is always possible via sysfs. Another aspect of tracking interleave sets is tracking their integrity when DIMMs in a set are physically re-ordered. For this purpose we generate an "interleave-set cookie" that can be recorded in a label and validated against the current configuration. It is the bus provider implementation's responsibility to calculate the interleave set cookie and attach it to a given region. Cc: Neil Brown <neilb@suse.de> Cc: <linux-acpi@vger.kernel.org> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Christoph Hellwig <hch@lst.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-05-01 11:11:27 -06:00
#include <linux/libnvdimm.h>
#include <linux/sizes.h>
#include <linux/mutex.h>
libnvdimm: blk labels and namespace instantiation A blk label set describes a namespace comprised of one or more discontiguous dpa ranges on a single dimm. They may alias with one or more pmem interleave sets that include the given dimm. This is the runtime/volatile configuration infrastructure for sysfs manipulation of 'alt_name', 'uuid', 'size', and 'sector_size'. A later patch will make these settings persistent by writing back the label(s). Unlike pmem namespaces, multiple blk namespaces can be created per region. Once a blk namespace has been created a new seed device (unconfigured child of a parent blk region) is instantiated. As long as a region has 'available_size' != 0 new child namespaces may be created. Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Neil Brown <neilb@suse.de> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-05-01 11:34:01 -06:00
#include <linux/nd.h>
libnvdimm, nfit: initial libnvdimm infrastructure and NFIT support A struct nvdimm_bus is the anchor device for registering nvdimm resources and interfaces, for example, a character control device, nvdimm devices, and I/O region devices. The ACPI NFIT (NVDIMM Firmware Interface Table) is one possible platform description for such non-volatile memory resources in a system. The nfit.ko driver attaches to the "ACPI0012" device that indicates the presence of the NFIT and parses the table to register a struct nvdimm_bus instance. Cc: <linux-acpi@vger.kernel.org> Cc: Lv Zheng <lv.zheng@intel.com> Cc: Robert Moore <robert.moore@intel.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-05-19 20:54:31 -06:00
libnvdimm, nfit: dimm/memory-devices Enable nvdimm devices to be registered on a nvdimm_bus. The kernel assigned device id for nvdimm devicesis dynamic. If userspace needs a more static identifier it should consult a provider-specific attribute. In the case where NFIT is the provider, the 'nmemX/nfit/handle' or 'nmemX/nfit/serial' attributes may be used for this purpose. Cc: Neil Brown <neilb@suse.de> Cc: <linux-acpi@vger.kernel.org> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Christoph Hellwig <hch@lst.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-04-25 01:56:17 -06:00
extern struct list_head nvdimm_bus_list;
extern struct mutex nvdimm_bus_list_mutex;
libnvdimm: control (ioctl) messages for nvdimm_bus and nvdimm devices Most discovery/configuration of the nvdimm-subsystem is done via sysfs attributes. However, some nvdimm_bus instances, particularly the ACPI.NFIT bus, define a small set of messages that can be passed to the platform. For convenience we derive the initial libnvdimm-ioctl command formats directly from the NFIT DSM Interface Example formats. ND_CMD_SMART: media health and diagnostics ND_CMD_GET_CONFIG_SIZE: size of the label space ND_CMD_GET_CONFIG_DATA: read label space ND_CMD_SET_CONFIG_DATA: write label space ND_CMD_VENDOR: vendor-specific command passthrough ND_CMD_ARS_CAP: report address-range-scrubbing capabilities ND_CMD_ARS_START: initiate scrubbing ND_CMD_ARS_STATUS: report on scrubbing state ND_CMD_SMART_THRESHOLD: configure alarm thresholds for smart events If a platform later defines different commands than this set it is straightforward to extend support to those formats. Most of the commands target a specific dimm. However, the address-range-scrubbing commands target the bus. The 'commands' attribute in sysfs of an nvdimm_bus, or nvdimm, enumerate the supported commands for that object. Cc: <linux-acpi@vger.kernel.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reported-by: Nicholas Moulin <nicholas.w.moulin@linux.intel.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-06-08 12:27:06 -06:00
extern int nvdimm_major;
libnvdimm, nfit: dimm/memory-devices Enable nvdimm devices to be registered on a nvdimm_bus. The kernel assigned device id for nvdimm devicesis dynamic. If userspace needs a more static identifier it should consult a provider-specific attribute. In the case where NFIT is the provider, the 'nmemX/nfit/handle' or 'nmemX/nfit/serial' attributes may be used for this purpose. Cc: Neil Brown <neilb@suse.de> Cc: <linux-acpi@vger.kernel.org> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Christoph Hellwig <hch@lst.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-04-25 01:56:17 -06:00
libnvdimm, nfit: initial libnvdimm infrastructure and NFIT support A struct nvdimm_bus is the anchor device for registering nvdimm resources and interfaces, for example, a character control device, nvdimm devices, and I/O region devices. The ACPI NFIT (NVDIMM Firmware Interface Table) is one possible platform description for such non-volatile memory resources in a system. The nfit.ko driver attaches to the "ACPI0012" device that indicates the presence of the NFIT and parses the table to register a struct nvdimm_bus instance. Cc: <linux-acpi@vger.kernel.org> Cc: Lv Zheng <lv.zheng@intel.com> Cc: Robert Moore <robert.moore@intel.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-05-19 20:54:31 -06:00
struct nvdimm_bus {
struct nvdimm_bus_descriptor *nd_desc;
libnvdimm, nfit: add interleave-set state-tracking infrastructure On platforms that have firmware support for reading/writing per-dimm label space, a portion of the dimm may be accessible via an interleave set PMEM mapping in addition to the dimm's BLK (block-data-window aperture(s)) interface. A label, stored in a "configuration data region" on the dimm, disambiguates which dimm addresses are accessed through which exclusive interface. Add infrastructure that allows the kernel to block modifications to a label in the set while any member dimm is active. Note that this is meant only for enforcing "no modifications of active labels" via the coarse ioctl command. Adding/deleting namespaces from an active interleave set is always possible via sysfs. Another aspect of tracking interleave sets is tracking their integrity when DIMMs in a set are physically re-ordered. For this purpose we generate an "interleave-set cookie" that can be recorded in a label and validated against the current configuration. It is the bus provider implementation's responsibility to calculate the interleave set cookie and attach it to a given region. Cc: Neil Brown <neilb@suse.de> Cc: <linux-acpi@vger.kernel.org> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Christoph Hellwig <hch@lst.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-05-01 11:11:27 -06:00
wait_queue_head_t probe_wait;
libnvdimm: control character device and nvdimm_bus sysfs attributes The control device for a nvdimm_bus is registered as an "nd" class device. The expectation is that there will usually only be one "nd" bus registered under /sys/class/nd. However, we allow for the possibility of multiple buses and they will listed in discovery order as ndctl0...ndctlN. This character device hosts the ioctl for passing control messages. The initial command set has a 1:1 correlation with the commands listed in the by the "NFIT DSM Example" document [1], but this scheme is extensible to future command sets. Note, nd_ioctl() and the backing ->ndctl() implementation are defined in a subsequent patch. This is simply the initial registrations and sysfs attributes. [1]: http://pmem.io/documents/NVDIMM_DSM_Interface_Example.pdf Cc: Neil Brown <neilb@suse.de> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: <linux-acpi@vger.kernel.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Christoph Hellwig <hch@lst.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-04-26 17:26:48 -06:00
struct list_head list;
libnvdimm, nfit: initial libnvdimm infrastructure and NFIT support A struct nvdimm_bus is the anchor device for registering nvdimm resources and interfaces, for example, a character control device, nvdimm devices, and I/O region devices. The ACPI NFIT (NVDIMM Firmware Interface Table) is one possible platform description for such non-volatile memory resources in a system. The nfit.ko driver attaches to the "ACPI0012" device that indicates the presence of the NFIT and parses the table to register a struct nvdimm_bus instance. Cc: <linux-acpi@vger.kernel.org> Cc: Lv Zheng <lv.zheng@intel.com> Cc: Robert Moore <robert.moore@intel.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-05-19 20:54:31 -06:00
struct device dev;
libnvdimm, nfit: add interleave-set state-tracking infrastructure On platforms that have firmware support for reading/writing per-dimm label space, a portion of the dimm may be accessible via an interleave set PMEM mapping in addition to the dimm's BLK (block-data-window aperture(s)) interface. A label, stored in a "configuration data region" on the dimm, disambiguates which dimm addresses are accessed through which exclusive interface. Add infrastructure that allows the kernel to block modifications to a label in the set while any member dimm is active. Note that this is meant only for enforcing "no modifications of active labels" via the coarse ioctl command. Adding/deleting namespaces from an active interleave set is always possible via sysfs. Another aspect of tracking interleave sets is tracking their integrity when DIMMs in a set are physically re-ordered. For this purpose we generate an "interleave-set cookie" that can be recorded in a label and validated against the current configuration. It is the bus provider implementation's responsibility to calculate the interleave set cookie and attach it to a given region. Cc: Neil Brown <neilb@suse.de> Cc: <linux-acpi@vger.kernel.org> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Christoph Hellwig <hch@lst.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-05-01 11:11:27 -06:00
int id, probe_active;
libnvdimm: Add a poison list and export badblocks During region creation, perform Address Range Scrubs (ARS) for the SPA (System Physical Address) ranges to retrieve known poison locations from firmware. Add a new data structure 'nd_poison' which is used as a list in nvdimm_bus to store these poison locations. When creating a pmem namespace, if there is any known poison associated with its physical address space, convert the poison ranges to bad sectors that are exposed using the badblocks interface. Signed-off-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-12-24 19:21:43 -07:00
struct list_head poison_list;
libnvdimm: introduce devm_nvdimm_memremap(), convert nfit_spa_map() users In preparation for generically mapping flush hint addresses for both the BLK and PMEM use case, provide a generic / reference counted mapping api. Given the fact that a dimm may belong to multiple regions (PMEM and BLK), the flush hint addresses need to be held valid as long as any region associated with the dimm is active. This is similar to the existing BLK-region case where multiple BLK-regions may share an aperture mapping. Up-level this shared / reference-counted mapping capability from the nfit driver to a core nvdimm capability. This eliminates the need for the nd_blk_region.disable() callback. Note that the removal of nfit_spa_map() and related infrastructure is deferred to a later patch. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-06-06 18:42:38 -06:00
struct list_head mapping_list;
libnvdimm: support for legacy (non-aliasing) nvdimms The libnvdimm region driver is an intermediary driver that translates non-volatile "region"s into "namespace" sub-devices that are surfaced by persistent memory block-device drivers (PMEM and BLK). ACPI 6 introduces the concept that a given nvdimm may simultaneously offer multiple access modes to its media through direct PMEM load/store access, or windowed BLK mode. Existing nvdimms mostly implement a PMEM interface, some offer a BLK-like mode, but never both as ACPI 6 defines. If an nvdimm is single interfaced, then there is no need for dimm metadata labels. For these devices we can take the region boundaries directly to create a child namespace device (nd_namespace_io). Acked-by: Christoph Hellwig <hch@lst.de> Tested-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-05-31 13:02:11 -06:00
struct mutex reconfig_mutex;
libnvdimm: fix clear poison locking with spinlock and GFP_NOWAIT allocation The following warning results from holding a lane spinlock, preempt_disable(), or the btt map spinlock and then trying to take the reconfig_mutex to walk the poison list and potentially add new entries. BUG: sleeping function called from invalid context at kernel/locking/mutex. c:747 in_atomic(): 1, irqs_disabled(): 0, pid: 17159, name: dd [..] Call Trace: dump_stack+0x85/0xc8 ___might_sleep+0x184/0x250 __might_sleep+0x4a/0x90 __mutex_lock+0x58/0x9b0 ? nvdimm_bus_lock+0x21/0x30 [libnvdimm] ? __nvdimm_bus_badblocks_clear+0x2f/0x60 [libnvdimm] ? acpi_nfit_forget_poison+0x79/0x80 [nfit] ? _raw_spin_unlock+0x27/0x40 mutex_lock_nested+0x1b/0x20 nvdimm_bus_lock+0x21/0x30 [libnvdimm] nvdimm_forget_poison+0x25/0x50 [libnvdimm] nvdimm_clear_poison+0x106/0x140 [libnvdimm] nsio_rw_bytes+0x164/0x270 [libnvdimm] btt_write_pg+0x1de/0x3e0 [nd_btt] ? blk_queue_enter+0x30/0x290 btt_make_request+0x11a/0x310 [nd_btt] ? blk_queue_enter+0xb7/0x290 ? blk_queue_enter+0x30/0x290 generic_make_request+0x118/0x3b0 A spinlock is introduced to protect the poison list. This allows us to not having to acquire the reconfig_mutex for touching the poison list. The add_poison() function has been broken out into two helper functions. One to allocate the poison entry and the other to apppend the entry. This allows us to unlock the poison_lock in non-I/O path and continue to be able to allocate the poison entry with GFP_KERNEL. We will use GFP_NOWAIT in the I/O path in order to satisfy being in atomic context. Reviewed-by: Vishal Verma <vishal.l.verma@intel.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-04-13 15:25:17 -06:00
spinlock_t poison_lock;
libnvdimm, nfit: initial libnvdimm infrastructure and NFIT support A struct nvdimm_bus is the anchor device for registering nvdimm resources and interfaces, for example, a character control device, nvdimm devices, and I/O region devices. The ACPI NFIT (NVDIMM Firmware Interface Table) is one possible platform description for such non-volatile memory resources in a system. The nfit.ko driver attaches to the "ACPI0012" device that indicates the presence of the NFIT and parses the table to register a struct nvdimm_bus instance. Cc: <linux-acpi@vger.kernel.org> Cc: Lv Zheng <lv.zheng@intel.com> Cc: Robert Moore <robert.moore@intel.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-05-19 20:54:31 -06:00
};
libnvdimm: control character device and nvdimm_bus sysfs attributes The control device for a nvdimm_bus is registered as an "nd" class device. The expectation is that there will usually only be one "nd" bus registered under /sys/class/nd. However, we allow for the possibility of multiple buses and they will listed in discovery order as ndctl0...ndctlN. This character device hosts the ioctl for passing control messages. The initial command set has a 1:1 correlation with the commands listed in the by the "NFIT DSM Example" document [1], but this scheme is extensible to future command sets. Note, nd_ioctl() and the backing ->ndctl() implementation are defined in a subsequent patch. This is simply the initial registrations and sysfs attributes. [1]: http://pmem.io/documents/NVDIMM_DSM_Interface_Example.pdf Cc: Neil Brown <neilb@suse.de> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: <linux-acpi@vger.kernel.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Christoph Hellwig <hch@lst.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-04-26 17:26:48 -06:00
libnvdimm, nfit: dimm/memory-devices Enable nvdimm devices to be registered on a nvdimm_bus. The kernel assigned device id for nvdimm devicesis dynamic. If userspace needs a more static identifier it should consult a provider-specific attribute. In the case where NFIT is the provider, the 'nmemX/nfit/handle' or 'nmemX/nfit/serial' attributes may be used for this purpose. Cc: Neil Brown <neilb@suse.de> Cc: <linux-acpi@vger.kernel.org> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Christoph Hellwig <hch@lst.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-04-25 01:56:17 -06:00
struct nvdimm {
unsigned long flags;
void *provider_data;
nfit, libnvdimm: clarify "commands" vs "_DSMs" Clarify the distinction between "commands", the ioctls userspace calls to request the kernel take some action on a given dimm device, and "_DSMs", the actual function numbers used in the firmware interface to the DIMM. _DSMs are ACPI specific whereas commands are Linux kernel generic. This is in preparation for breaking the 1:1 implicit relationship between the kernel ioctl number space and the firmware specific function numbers. Cc: Jerry Hoemann <jerry.hoemann@hpe.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-04-28 17:17:07 -06:00
unsigned long cmd_mask;
libnvdimm, nfit: dimm/memory-devices Enable nvdimm devices to be registered on a nvdimm_bus. The kernel assigned device id for nvdimm devicesis dynamic. If userspace needs a more static identifier it should consult a provider-specific attribute. In the case where NFIT is the provider, the 'nmemX/nfit/handle' or 'nmemX/nfit/serial' attributes may be used for this purpose. Cc: Neil Brown <neilb@suse.de> Cc: <linux-acpi@vger.kernel.org> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Christoph Hellwig <hch@lst.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-04-25 01:56:17 -06:00
struct device dev;
libnvdimm, nfit: add interleave-set state-tracking infrastructure On platforms that have firmware support for reading/writing per-dimm label space, a portion of the dimm may be accessible via an interleave set PMEM mapping in addition to the dimm's BLK (block-data-window aperture(s)) interface. A label, stored in a "configuration data region" on the dimm, disambiguates which dimm addresses are accessed through which exclusive interface. Add infrastructure that allows the kernel to block modifications to a label in the set while any member dimm is active. Note that this is meant only for enforcing "no modifications of active labels" via the coarse ioctl command. Adding/deleting namespaces from an active interleave set is always possible via sysfs. Another aspect of tracking interleave sets is tracking their integrity when DIMMs in a set are physically re-ordered. For this purpose we generate an "interleave-set cookie" that can be recorded in a label and validated against the current configuration. It is the bus provider implementation's responsibility to calculate the interleave set cookie and attach it to a given region. Cc: Neil Brown <neilb@suse.de> Cc: <linux-acpi@vger.kernel.org> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Christoph Hellwig <hch@lst.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-05-01 11:11:27 -06:00
atomic_t busy;
libnvdimm, nfit: move flush hint mapping to region-device driver-data In preparation for triggering flushes of a DIMM's writes-posted-queue (WPQ) via the pmem driver move mapping of flush hint addresses to the region driver. Since this uses devm_nvdimm_memremap() the flush addresses will remain mapped while any region to which the dimm belongs is active. We need to communicate more information to the nvdimm core to facilitate this mapping, namely each dimm object now carries an array of flush hint address resources. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-06-07 18:00:04 -06:00
int id, num_flush;
struct resource *flush_wpq;
libnvdimm, nfit: dimm/memory-devices Enable nvdimm devices to be registered on a nvdimm_bus. The kernel assigned device id for nvdimm devicesis dynamic. If userspace needs a more static identifier it should consult a provider-specific attribute. In the case where NFIT is the provider, the 'nmemX/nfit/handle' or 'nmemX/nfit/serial' attributes may be used for this purpose. Cc: Neil Brown <neilb@suse.de> Cc: <linux-acpi@vger.kernel.org> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Christoph Hellwig <hch@lst.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-04-25 01:56:17 -06:00
};
libnvdimm, namespace: enable allocation of multiple pmem namespaces Now that we have nd_region_available_dpa() able to handle the presence of multiple PMEM allocations in aliased PMEM regions, reuse that same infrastructure to track allocations from free space. In particular handle allocating from an aliased PMEM region in the case where there are dis-contiguous holes. The allocation for BLK and PMEM are documented in the space_valid() helper: BLK-space is valid as long as it does not precede a PMEM allocation in a given region. PMEM-space must be contiguous and adjacent to an existing existing allocation (if one exists). Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-10-04 17:09:59 -06:00
/**
* struct blk_alloc_info - tracking info for BLK dpa scanning
* @nd_mapping: blk region mapping boundaries
* @available: decremented in alias_dpa_busy as aliased PMEM is scanned
* @busy: decremented in blk_dpa_busy to account for ranges already
* handled by alias_dpa_busy
* @res: alias_dpa_busy interprets this a free space range that needs to
* be truncated to the valid BLK allocation starting DPA, blk_dpa_busy
* treats it as a busy range that needs the aliased PMEM ranges
* truncated.
*/
struct blk_alloc_info {
struct nd_mapping *nd_mapping;
resource_size_t available, busy;
struct resource *res;
};
libnvdimm: support for legacy (non-aliasing) nvdimms The libnvdimm region driver is an intermediary driver that translates non-volatile "region"s into "namespace" sub-devices that are surfaced by persistent memory block-device drivers (PMEM and BLK). ACPI 6 introduces the concept that a given nvdimm may simultaneously offer multiple access modes to its media through direct PMEM load/store access, or windowed BLK mode. Existing nvdimms mostly implement a PMEM interface, some offer a BLK-like mode, but never both as ACPI 6 defines. If an nvdimm is single interfaced, then there is no need for dimm metadata labels. For these devices we can take the region boundaries directly to create a child namespace device (nd_namespace_io). Acked-by: Christoph Hellwig <hch@lst.de> Tested-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-05-31 13:02:11 -06:00
bool is_nvdimm(struct device *dev);
bool is_nd_pmem(struct device *dev);
libnvdimm, nfit: enable support for volatile ranges Allow volatile nfit ranges to participate in all the same infrastructure provided for persistent memory regions. A resulting resulting namespace device will still be called "pmem", but the parent region type will be "nd_volatile". This is in preparation for disabling the dax ->flush() operation in the pmem driver when it is hosted on a volatile range. Cc: Jan Kara <jack@suse.cz> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-05-30 00:12:19 -06:00
bool is_nd_volatile(struct device *dev);
libnvdimm, nfit, nd_blk: driver for BLK-mode access persistent memory The libnvdimm implementation handles allocating dimm address space (DPA) between PMEM and BLK mode interfaces. After DPA has been allocated from a BLK-region to a BLK-namespace the nd_blk driver attaches to handle I/O as a struct bio based block device. Unlike PMEM, BLK is required to handle platform specific details like mmio register formats and memory controller interleave. For this reason the libnvdimm generic nd_blk driver calls back into the bus provider to carry out the I/O. This initial implementation handles the BLK interface defined by the ACPI 6 NFIT [1] and the NVDIMM DSM Interface Example [2] composed from DCR (dimm control region), BDW (block data window), IDT (interleave descriptor) NFIT structures and the hardware register format. [1]: http://www.uefi.org/sites/default/files/resources/ACPI_6.0.pdf [2]: http://pmem.io/documents/NVDIMM_DSM_Interface_Example.pdf Cc: Andy Lutomirski <luto@amacapital.net> Cc: Boaz Harrosh <boaz@plexistor.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jens Axboe <axboe@fb.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-06-25 02:21:02 -06:00
bool is_nd_blk(struct device *dev);
libnvdimm, nfit: enable support for volatile ranges Allow volatile nfit ranges to participate in all the same infrastructure provided for persistent memory regions. A resulting resulting namespace device will still be called "pmem", but the parent region type will be "nd_volatile". This is in preparation for disabling the dax ->flush() operation in the pmem driver when it is hosted on a volatile range. Cc: Jan Kara <jack@suse.cz> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2017-05-30 00:12:19 -06:00
static inline bool is_nd_region(struct device *dev)
{
return is_nd_pmem(dev) || is_nd_blk(dev) || is_nd_volatile(dev);
}
static inline bool is_memory(struct device *dev)
{
return is_nd_pmem(dev) || is_nd_volatile(dev);
}
libnvdimm, nfit: dimm/memory-devices Enable nvdimm devices to be registered on a nvdimm_bus. The kernel assigned device id for nvdimm devicesis dynamic. If userspace needs a more static identifier it should consult a provider-specific attribute. In the case where NFIT is the provider, the 'nmemX/nfit/handle' or 'nmemX/nfit/serial' attributes may be used for this purpose. Cc: Neil Brown <neilb@suse.de> Cc: <linux-acpi@vger.kernel.org> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Christoph Hellwig <hch@lst.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-04-25 01:56:17 -06:00
struct nvdimm_bus *walk_to_nvdimm_bus(struct device *nd_dev);
libnvdimm: control character device and nvdimm_bus sysfs attributes The control device for a nvdimm_bus is registered as an "nd" class device. The expectation is that there will usually only be one "nd" bus registered under /sys/class/nd. However, we allow for the possibility of multiple buses and they will listed in discovery order as ndctl0...ndctlN. This character device hosts the ioctl for passing control messages. The initial command set has a 1:1 correlation with the commands listed in the by the "NFIT DSM Example" document [1], but this scheme is extensible to future command sets. Note, nd_ioctl() and the backing ->ndctl() implementation are defined in a subsequent patch. This is simply the initial registrations and sysfs attributes. [1]: http://pmem.io/documents/NVDIMM_DSM_Interface_Example.pdf Cc: Neil Brown <neilb@suse.de> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: <linux-acpi@vger.kernel.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Christoph Hellwig <hch@lst.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-04-26 17:26:48 -06:00
int __init nvdimm_bus_init(void);
libnvdimm, nvdimm: dimm driver and base libnvdimm device-driver infrastructure * Implement the device-model infrastructure for loading modules and attaching drivers to nvdimm devices. This is a simple association of a nd-device-type number with a driver that has a bitmask of supported device types. To facilitate userspace bind/unbind operations 'modalias' and 'devtype', that also appear in the uevent, are added as generic sysfs attributes for all nvdimm devices. The reason for the device-type number is to support sub-types within a given parent devtype, be it a vendor-specific sub-type or otherwise. * The first consumer of this infrastructure is the driver for dimm devices. It simply uses control messages to retrieve and store the configuration-data image (label set) from each dimm. Note: nd_device_register() arranges for asynchronous registration of nvdimm bus devices by default. Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Neil Brown <neilb@suse.de> Acked-by: Christoph Hellwig <hch@lst.de> Tested-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-05-31 12:41:48 -06:00
void nvdimm_bus_exit(void);
libnvdimm: release ida resources ida instances allocate some internal memory for ->free_bitmap in addition to the base 'struct ida'. Use ida_destroy() to release that memory at module_exit(). Reported-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-05-17 21:24:16 -06:00
void nvdimm_devs_exit(void);
void nd_region_devs_exit(void);
libnvdimm, nfit: add interleave-set state-tracking infrastructure On platforms that have firmware support for reading/writing per-dimm label space, a portion of the dimm may be accessible via an interleave set PMEM mapping in addition to the dimm's BLK (block-data-window aperture(s)) interface. A label, stored in a "configuration data region" on the dimm, disambiguates which dimm addresses are accessed through which exclusive interface. Add infrastructure that allows the kernel to block modifications to a label in the set while any member dimm is active. Note that this is meant only for enforcing "no modifications of active labels" via the coarse ioctl command. Adding/deleting namespaces from an active interleave set is always possible via sysfs. Another aspect of tracking interleave sets is tracking their integrity when DIMMs in a set are physically re-ordered. For this purpose we generate an "interleave-set cookie" that can be recorded in a label and validated against the current configuration. It is the bus provider implementation's responsibility to calculate the interleave set cookie and attach it to a given region. Cc: Neil Brown <neilb@suse.de> Cc: <linux-acpi@vger.kernel.org> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Christoph Hellwig <hch@lst.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-05-01 11:11:27 -06:00
void nd_region_probe_success(struct nvdimm_bus *nvdimm_bus, struct device *dev);
libnvdimm: blk labels and namespace instantiation A blk label set describes a namespace comprised of one or more discontiguous dpa ranges on a single dimm. They may alias with one or more pmem interleave sets that include the given dimm. This is the runtime/volatile configuration infrastructure for sysfs manipulation of 'alt_name', 'uuid', 'size', and 'sector_size'. A later patch will make these settings persistent by writing back the label(s). Unlike pmem namespaces, multiple blk namespaces can be created per region. Once a blk namespace has been created a new seed device (unconfigured child of a parent blk region) is instantiated. As long as a region has 'available_size' != 0 new child namespaces may be created. Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Neil Brown <neilb@suse.de> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-05-01 11:34:01 -06:00
struct nd_region;
libnvdimm, namespace: allow creation of multiple pmem-namespaces per region Similar to BLK regions, publish new seed namespace devices to allow unused PMEM region capacity to be consumed by additional namespaces. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-09-30 16:28:27 -06:00
void nd_region_create_ns_seed(struct nd_region *nd_region);
libnvdimm: infrastructure for btt devices NVDIMM namespaces, in addition to accepting "struct bio" based requests, also have the capability to perform byte-aligned accesses. By default only the bio/block interface is used. However, if another driver can make effective use of the byte-aligned capability it can claim namespace interface and use the byte-aligned ->rw_bytes() interface. The BTT driver is the initial first consumer of this mechanism to allow adding atomic sector update semantics to a pmem or blk namespace. This patch is the sysfs infrastructure to allow configuring a BTT instance for a namespace. Enabling that BTT and performing i/o is in a subsequent patch. Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Neil Brown <neilb@suse.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-06-25 02:20:04 -06:00
void nd_region_create_btt_seed(struct nd_region *nd_region);
libnvdimm, pfn: fix pfn seed creation Similar to btt, plant a new pfn seed when the existing one is activated. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-12-13 12:41:36 -07:00
void nd_region_create_pfn_seed(struct nd_region *nd_region);
libnvdimm, dax: introduce device-dax infrastructure Device DAX is the device-centric analogue of Filesystem DAX (CONFIG_FS_DAX). It allows persistent memory ranges to be allocated and mapped without need of an intervening file system. This initial infrastructure arranges for a libnvdimm pfn-device to be represented as a different device-type so that it can be attached to a driver other than the pmem driver. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-03-11 11:15:36 -07:00
void nd_region_create_dax_seed(struct nd_region *nd_region);
libnvdimm, nfit: add interleave-set state-tracking infrastructure On platforms that have firmware support for reading/writing per-dimm label space, a portion of the dimm may be accessible via an interleave set PMEM mapping in addition to the dimm's BLK (block-data-window aperture(s)) interface. A label, stored in a "configuration data region" on the dimm, disambiguates which dimm addresses are accessed through which exclusive interface. Add infrastructure that allows the kernel to block modifications to a label in the set while any member dimm is active. Note that this is meant only for enforcing "no modifications of active labels" via the coarse ioctl command. Adding/deleting namespaces from an active interleave set is always possible via sysfs. Another aspect of tracking interleave sets is tracking their integrity when DIMMs in a set are physically re-ordered. For this purpose we generate an "interleave-set cookie" that can be recorded in a label and validated against the current configuration. It is the bus provider implementation's responsibility to calculate the interleave set cookie and attach it to a given region. Cc: Neil Brown <neilb@suse.de> Cc: <linux-acpi@vger.kernel.org> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Christoph Hellwig <hch@lst.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-05-01 11:11:27 -06:00
void nd_region_disable(struct nvdimm_bus *nvdimm_bus, struct device *dev);
libnvdimm: control character device and nvdimm_bus sysfs attributes The control device for a nvdimm_bus is registered as an "nd" class device. The expectation is that there will usually only be one "nd" bus registered under /sys/class/nd. However, we allow for the possibility of multiple buses and they will listed in discovery order as ndctl0...ndctlN. This character device hosts the ioctl for passing control messages. The initial command set has a 1:1 correlation with the commands listed in the by the "NFIT DSM Example" document [1], but this scheme is extensible to future command sets. Note, nd_ioctl() and the backing ->ndctl() implementation are defined in a subsequent patch. This is simply the initial registrations and sysfs attributes. [1]: http://pmem.io/documents/NVDIMM_DSM_Interface_Example.pdf Cc: Neil Brown <neilb@suse.de> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: <linux-acpi@vger.kernel.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Christoph Hellwig <hch@lst.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-04-26 17:26:48 -06:00
int nvdimm_bus_create_ndctl(struct nvdimm_bus *nvdimm_bus);
void nvdimm_bus_destroy_ndctl(struct nvdimm_bus *nvdimm_bus);
libnvdimm, nvdimm: dimm driver and base libnvdimm device-driver infrastructure * Implement the device-model infrastructure for loading modules and attaching drivers to nvdimm devices. This is a simple association of a nd-device-type number with a driver that has a bitmask of supported device types. To facilitate userspace bind/unbind operations 'modalias' and 'devtype', that also appear in the uevent, are added as generic sysfs attributes for all nvdimm devices. The reason for the device-type number is to support sub-types within a given parent devtype, be it a vendor-specific sub-type or otherwise. * The first consumer of this infrastructure is the driver for dimm devices. It simply uses control messages to retrieve and store the configuration-data image (label set) from each dimm. Note: nd_device_register() arranges for asynchronous registration of nvdimm bus devices by default. Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Neil Brown <neilb@suse.de> Acked-by: Christoph Hellwig <hch@lst.de> Tested-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-05-31 12:41:48 -06:00
void nd_synchronize(void);
libnvdimm, nfit: regions (block-data-window, persistent memory, volatile memory) A "region" device represents the maximum capacity of a BLK range (mmio block-data-window(s)), or a PMEM range (DAX-capable persistent memory or volatile memory), without regard for aliasing. Aliasing, in the dimm-local address space (DPA), is resolved by metadata on a dimm to designate which exclusive interface will access the aliased DPA ranges. Support for the per-dimm metadata/label arrvies is in a subsequent patch. The name format of "region" devices is "regionN" where, like dimms, N is a global ida index assigned at discovery time. This id is not reliable across reboots nor in the presence of hotplug. Look to attributes of the region or static id-data of the sub-namespace to generate a persistent name. However, if the platform configuration does not change it is reasonable to expect the same region id to be assigned at the next boot. "region"s have 2 generic attributes "size", and "mapping"s where: - size: the BLK accessible capacity or the span of the system physical address range in the case of PMEM. - mappingN: a tuple describing a dimm's contribution to the region's capacity in the format (<nmemX>,<dpa>,<size>). For a PMEM-region there will be at least one mapping per dimm in the interleave set. For a BLK-region there is only "mapping0" listing the starting DPA of the BLK-region and the available DPA capacity of that space (matches "size" above). The max number of mappings per "region" is hard coded per the constraints of sysfs attribute groups. That said the number of mappings per region should never exceed the maximum number of possible dimms in the system. If the current number turns out to not be enough then the "mappings" attribute clarifies how many there are supposed to be. "32 should be enough for anybody...". Cc: Neil Brown <neilb@suse.de> Cc: <linux-acpi@vger.kernel.org> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Christoph Hellwig <hch@lst.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-06-09 18:13:14 -06:00
int nvdimm_bus_register_dimms(struct nvdimm_bus *nvdimm_bus);
int nvdimm_bus_register_regions(struct nvdimm_bus *nvdimm_bus);
libnvdimm, nfit: add interleave-set state-tracking infrastructure On platforms that have firmware support for reading/writing per-dimm label space, a portion of the dimm may be accessible via an interleave set PMEM mapping in addition to the dimm's BLK (block-data-window aperture(s)) interface. A label, stored in a "configuration data region" on the dimm, disambiguates which dimm addresses are accessed through which exclusive interface. Add infrastructure that allows the kernel to block modifications to a label in the set while any member dimm is active. Note that this is meant only for enforcing "no modifications of active labels" via the coarse ioctl command. Adding/deleting namespaces from an active interleave set is always possible via sysfs. Another aspect of tracking interleave sets is tracking their integrity when DIMMs in a set are physically re-ordered. For this purpose we generate an "interleave-set cookie" that can be recorded in a label and validated against the current configuration. It is the bus provider implementation's responsibility to calculate the interleave set cookie and attach it to a given region. Cc: Neil Brown <neilb@suse.de> Cc: <linux-acpi@vger.kernel.org> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Christoph Hellwig <hch@lst.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-05-01 11:11:27 -06:00
int nvdimm_bus_init_interleave_sets(struct nvdimm_bus *nvdimm_bus);
libnvdimm: infrastructure for btt devices NVDIMM namespaces, in addition to accepting "struct bio" based requests, also have the capability to perform byte-aligned accesses. By default only the bio/block interface is used. However, if another driver can make effective use of the byte-aligned capability it can claim namespace interface and use the byte-aligned ->rw_bytes() interface. The BTT driver is the initial first consumer of this mechanism to allow adding atomic sector update semantics to a pmem or blk namespace. This patch is the sysfs infrastructure to allow configuring a BTT instance for a namespace. Enabling that BTT and performing i/o is in a subsequent patch. Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Neil Brown <neilb@suse.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-06-25 02:20:04 -06:00
void __nd_device_register(struct device *dev);
libnvdimm, nfit: regions (block-data-window, persistent memory, volatile memory) A "region" device represents the maximum capacity of a BLK range (mmio block-data-window(s)), or a PMEM range (DAX-capable persistent memory or volatile memory), without regard for aliasing. Aliasing, in the dimm-local address space (DPA), is resolved by metadata on a dimm to designate which exclusive interface will access the aliased DPA ranges. Support for the per-dimm metadata/label arrvies is in a subsequent patch. The name format of "region" devices is "regionN" where, like dimms, N is a global ida index assigned at discovery time. This id is not reliable across reboots nor in the presence of hotplug. Look to attributes of the region or static id-data of the sub-namespace to generate a persistent name. However, if the platform configuration does not change it is reasonable to expect the same region id to be assigned at the next boot. "region"s have 2 generic attributes "size", and "mapping"s where: - size: the BLK accessible capacity or the span of the system physical address range in the case of PMEM. - mappingN: a tuple describing a dimm's contribution to the region's capacity in the format (<nmemX>,<dpa>,<size>). For a PMEM-region there will be at least one mapping per dimm in the interleave set. For a BLK-region there is only "mapping0" listing the starting DPA of the BLK-region and the available DPA capacity of that space (matches "size" above). The max number of mappings per "region" is hard coded per the constraints of sysfs attribute groups. That said the number of mappings per region should never exceed the maximum number of possible dimms in the system. If the current number turns out to not be enough then the "mappings" attribute clarifies how many there are supposed to be. "32 should be enough for anybody...". Cc: Neil Brown <neilb@suse.de> Cc: <linux-acpi@vger.kernel.org> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Christoph Hellwig <hch@lst.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-06-09 18:13:14 -06:00
int nd_match_dimm(struct device *dev, void *data);
libnvdimm: pmem label sets and namespace instantiation. A complete label set is a PMEM-label per-dimm per-interleave-set where all the UUIDs match and the interleave set cookie matches the hosting interleave set. Present sysfs attributes for manipulation of a PMEM-namespace's 'alt_name', 'uuid', and 'size' attributes. A later patch will make these settings persistent by writing back the label. Note that PMEM allocations grow forwards from the start of an interleave set (lowest dimm-physical-address (DPA)). BLK-namespaces that alias with a PMEM interleave set will grow allocations backward from the highest DPA. Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Neil Brown <neilb@suse.de> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-06-17 15:14:46 -06:00
struct nd_label_id;
char *nd_label_gen_id(struct nd_label_id *label_id, u8 *uuid, u32 flags);
bool nd_is_uuid_unique(struct device *dev, u8 *uuid);
struct nd_region;
struct nvdimm_drvdata;
struct nd_mapping;
libnvdimm, label: convert label tracking to a linked list In preparation for enabling multiple namespaces per pmem region, convert the label tracking to use a linked list. In particular this will allow select_pmem_id() to move labels from the unvalidated state to the validated state. Currently we only track one validated set per-region. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-09-19 17:04:21 -06:00
void nd_mapping_free_labels(struct nd_mapping *nd_mapping);
libnvdimm: pmem label sets and namespace instantiation. A complete label set is a PMEM-label per-dimm per-interleave-set where all the UUIDs match and the interleave set cookie matches the hosting interleave set. Present sysfs attributes for manipulation of a PMEM-namespace's 'alt_name', 'uuid', and 'size' attributes. A later patch will make these settings persistent by writing back the label. Note that PMEM allocations grow forwards from the start of an interleave set (lowest dimm-physical-address (DPA)). BLK-namespaces that alias with a PMEM interleave set will grow allocations backward from the highest DPA. Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Neil Brown <neilb@suse.de> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-06-17 15:14:46 -06:00
resource_size_t nd_pmem_available_dpa(struct nd_region *nd_region,
struct nd_mapping *nd_mapping, resource_size_t *overlap);
libnvdimm, region: update nd_region_available_dpa() for multi-pmem support The free dpa (dimm-physical-address) space calculation reports how much free space is available with consideration for aliased BLK + PMEM regions. Recall that BLK capacity is allocated from high addresses and PMEM is allocated from low addresses in their respective regions. nd_region_available_dpa() accounts for the fact that the largest encroachment (lowest starting address) into PMEM capacity by a BLK allocation limits the available capacity to that point, regardless if there is BLK allocation hole at a higher address. Similarly, for the multi-pmem case we need to track the largest encroachment (highest ending address) of a PMEM allocation in BLK capacity regardless of whether there is an allocation hole that a BLK allocation could fill at a lower address. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-09-30 18:28:58 -06:00
resource_size_t nd_blk_available_dpa(struct nd_region *nd_region);
libnvdimm: pmem label sets and namespace instantiation. A complete label set is a PMEM-label per-dimm per-interleave-set where all the UUIDs match and the interleave set cookie matches the hosting interleave set. Present sysfs attributes for manipulation of a PMEM-namespace's 'alt_name', 'uuid', and 'size' attributes. A later patch will make these settings persistent by writing back the label. Note that PMEM allocations grow forwards from the start of an interleave set (lowest dimm-physical-address (DPA)). BLK-namespaces that alias with a PMEM interleave set will grow allocations backward from the highest DPA. Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Neil Brown <neilb@suse.de> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-06-17 15:14:46 -06:00
resource_size_t nd_region_available_dpa(struct nd_region *nd_region);
resource_size_t nvdimm_allocated_dpa(struct nvdimm_drvdata *ndd,
struct nd_label_id *label_id);
libnvdimm, namespace: enable allocation of multiple pmem namespaces Now that we have nd_region_available_dpa() able to handle the presence of multiple PMEM allocations in aliased PMEM regions, reuse that same infrastructure to track allocations from free space. In particular handle allocating from an aliased PMEM region in the case where there are dis-contiguous holes. The allocation for BLK and PMEM are documented in the space_valid() helper: BLK-space is valid as long as it does not precede a PMEM allocation in a given region. PMEM-space must be contiguous and adjacent to an existing existing allocation (if one exists). Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-10-04 17:09:59 -06:00
int alias_dpa_busy(struct device *dev, void *data);
libnvdimm: blk labels and namespace instantiation A blk label set describes a namespace comprised of one or more discontiguous dpa ranges on a single dimm. They may alias with one or more pmem interleave sets that include the given dimm. This is the runtime/volatile configuration infrastructure for sysfs manipulation of 'alt_name', 'uuid', 'size', and 'sector_size'. A later patch will make these settings persistent by writing back the label(s). Unlike pmem namespaces, multiple blk namespaces can be created per region. Once a blk namespace has been created a new seed device (unconfigured child of a parent blk region) is instantiated. As long as a region has 'available_size' != 0 new child namespaces may be created. Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Neil Brown <neilb@suse.de> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-05-01 11:34:01 -06:00
struct resource *nsblk_add_resource(struct nd_region *nd_region,
struct nvdimm_drvdata *ndd, struct nd_namespace_blk *nsblk,
resource_size_t start);
libnvdimm: write blk label set After 'uuid', 'size', 'sector_size', and optionally 'alt_name' have been set to valid values the labels on the dimm can be updated. The difference with the pmem case is that blk namespaces are limited to one dimm and can cover discontiguous ranges in dpa space. Also, after allocating label slots, it is useful for userspace to know how many slots are left. Export this information in sysfs. Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Neil Brown <neilb@suse.de> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-05-30 10:35:36 -06:00
int nvdimm_num_label_slots(struct nvdimm_drvdata *ndd);
libnvdimm: pmem label sets and namespace instantiation. A complete label set is a PMEM-label per-dimm per-interleave-set where all the UUIDs match and the interleave set cookie matches the hosting interleave set. Present sysfs attributes for manipulation of a PMEM-namespace's 'alt_name', 'uuid', and 'size' attributes. A later patch will make these settings persistent by writing back the label. Note that PMEM allocations grow forwards from the start of an interleave set (lowest dimm-physical-address (DPA)). BLK-namespaces that alias with a PMEM interleave set will grow allocations backward from the highest DPA. Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Neil Brown <neilb@suse.de> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-06-17 15:14:46 -06:00
void get_ndd(struct nvdimm_drvdata *ndd);
libnvdimm: infrastructure for btt devices NVDIMM namespaces, in addition to accepting "struct bio" based requests, also have the capability to perform byte-aligned accesses. By default only the bio/block interface is used. However, if another driver can make effective use of the byte-aligned capability it can claim namespace interface and use the byte-aligned ->rw_bytes() interface. The BTT driver is the initial first consumer of this mechanism to allow adding atomic sector update semantics to a pmem or blk namespace. This patch is the sysfs infrastructure to allow configuring a BTT instance for a namespace. Enabling that BTT and performing i/o is in a subsequent patch. Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Neil Brown <neilb@suse.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-06-25 02:20:04 -06:00
resource_size_t __nvdimm_namespace_capacity(struct nd_namespace_common *ndns);
libnvdimm, pfn: 'struct page' provider infrastructure Implement the base infrastructure for libnvdimm PFN devices. Similar to BTT devices they take a namespace as a backing device and layer functionality on top. In this case the functionality is reserving space for an array of 'struct page' entries to be handed out through pfn_to_page(). For now this is just the basic libnvdimm-device-model for configuring the base PFN device. As the namespace claiming mechanism for PFN devices is mostly identical to BTT devices drivers/nvdimm/claim.c is created to house the common bits. Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-07-30 15:57:47 -06:00
void nd_detach_ndns(struct device *dev, struct nd_namespace_common **_ndns);
void __nd_detach_ndns(struct device *dev, struct nd_namespace_common **_ndns);
bool nd_attach_ndns(struct device *dev, struct nd_namespace_common *attach,
struct nd_namespace_common **_ndns);
bool __nd_attach_ndns(struct device *dev, struct nd_namespace_common *attach,
struct nd_namespace_common **_ndns);
ssize_t nd_namespace_store(struct device *dev,
struct nd_namespace_common **_ndns, const char *buf,
size_t len);
libnvdimm, dax: fix deletion The ndctl unit tests discovered that the dax enabling omitted updates to nd_detach_and_reset(). This routine clears device the configuration when the namespace is detached. Without this clearing userspace may assume that the device is in the process of being configured by another agent in the system. Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-05-21 13:22:41 -06:00
struct nd_pfn *to_nd_pfn_safe(struct device *dev);
libnvdimm, nfit: initial libnvdimm infrastructure and NFIT support A struct nvdimm_bus is the anchor device for registering nvdimm resources and interfaces, for example, a character control device, nvdimm devices, and I/O region devices. The ACPI NFIT (NVDIMM Firmware Interface Table) is one possible platform description for such non-volatile memory resources in a system. The nfit.ko driver attaches to the "ACPI0012" device that indicates the presence of the NFIT and parses the table to register a struct nvdimm_bus instance. Cc: <linux-acpi@vger.kernel.org> Cc: Lv Zheng <lv.zheng@intel.com> Cc: Robert Moore <robert.moore@intel.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Jeff Moyer <jmoyer@redhat.com> Acked-by: Christoph Hellwig <hch@lst.de> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Tested-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-05-19 20:54:31 -06:00
#endif /* __ND_CORE_H__ */