diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts index 2364fc56ae13..033fa63544f7 100644 --- a/arch/arm/boot/dts/armada-370-db.dts +++ b/arch/arm/boot/dts/armada-370-db.dts @@ -155,20 +155,6 @@ status = "okay"; }; - spi0: spi@10600 { - pinctrl-0 = <&spi0_pins2>; - pinctrl-names = "default"; - status = "okay"; - - spi-flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "mx25l25635e", "jedec,spi-nor"; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <50000000>; - }; - }; - nand@d0000 { status = "okay"; num-cs = <1>; @@ -274,3 +260,18 @@ compatible = "linux,spdif-dir"; }; }; + +&spi0 { + pinctrl-0 = <&spi0_pins2>; + pinctrl-names = "default"; + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mx25l25635e", "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <50000000>; + }; +}; + diff --git a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi index 1aba08e4377c..01cded310cbc 100644 --- a/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi +++ b/arch/arm/boot/dts/armada-370-seagate-personal-cloud.dtsi @@ -68,26 +68,6 @@ phy-mode = "rgmii-id"; }; - spi@10600 { - status = "okay"; - pinctrl-0 = <&spi0_pins2>; - pinctrl-names = "default"; - - spi-flash@0 { - #address-cells = <1>; - #size-cells = <1>; - /* MX25L8006E */ - compatible = "mxicy,mx25l8005", "jedec,spi-nor"; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <50000000>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x100000>; - }; - }; - }; - usb@50000 { status = "okay"; }; @@ -176,3 +156,23 @@ marvell,function = "gpio"; }; }; + +&spi0 { + status = "okay"; + pinctrl-0 = <&spi0_pins2>; + pinctrl-names = "default"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + /* MX25L8006E */ + compatible = "mxicy,mx25l8005", "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <50000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x100000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-370-synology-ds213j.dts b/arch/arm/boot/dts/armada-370-synology-ds213j.dts index 8ca7a4340c0f..a9cc42776874 100644 --- a/arch/arm/boot/dts/armada-370-synology-ds213j.dts +++ b/arch/arm/boot/dts/armada-370-synology-ds213j.dts @@ -87,62 +87,6 @@ status = "disabled"; }; - spi0: spi@10600 { - status = "okay"; - - spi-flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "micron,n25q064", "jedec,spi-nor"; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <20000000>; - - /* - * Warning! - * - * Synology u-boot uses its compiled-in environment - * and it seems Synology did not care to change u-boot - * default configuration in order to allow saving a - * modified environment at a sensible location. So, - * if you do a 'saveenv' under u-boot, your modified - * environment will be saved at 1MB after the start - * of the flash, i.e. in the middle of the uImage. - * For that reason, it is strongly advised not to - * change the default environment, unless you know - * what you are doing. - */ - partition@00000000 { /* u-boot */ - label = "RedBoot"; - reg = <0x00000000 0x000c0000>; /* 768KB */ - }; - - partition@000c0000 { /* uImage */ - label = "zImage"; - reg = <0x000c0000 0x002d0000>; /* 2880KB */ - }; - - partition@00390000 { /* uInitramfs */ - label = "rd.gz"; - reg = <0x00390000 0x00440000>; /* 4250KB */ - }; - - partition@007d0000 { /* MAC address and serial number */ - label = "vendor"; - reg = <0x007d0000 0x00010000>; /* 64KB */ - }; - - partition@007e0000 { - label = "RedBoot config"; - reg = <0x007e0000 0x00010000>; /* 64KB */ - }; - - partition@007f0000 { - label = "FIS directory"; - reg = <0x007f0000 0x00010000>; /* 64KB */ - }; - }; - }; - i2c@11000 { compatible = "marvell,mv64xxx-i2c"; pinctrl-0 = <&i2c0_pins>; @@ -347,3 +291,59 @@ marvell,function = "gpio"; }; }; + +&spi0 { + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "micron,n25q064", "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <20000000>; + + /* + * Warning! + * + * Synology u-boot uses its compiled-in environment + * and it seems Synology did not care to change u-boot + * default configuration in order to allow saving a + * modified environment at a sensible location. So, + * if you do a 'saveenv' under u-boot, your modified + * environment will be saved at 1MB after the start + * of the flash, i.e. in the middle of the uImage. + * For that reason, it is strongly advised not to + * change the default environment, unless you know + * what you are doing. + */ + partition@00000000 { /* u-boot */ + label = "RedBoot"; + reg = <0x00000000 0x000c0000>; /* 768KB */ + }; + + partition@000c0000 { /* uImage */ + label = "zImage"; + reg = <0x000c0000 0x002d0000>; /* 2880KB */ + }; + + partition@00390000 { /* uInitramfs */ + label = "rd.gz"; + reg = <0x00390000 0x00440000>; /* 4250KB */ + }; + + partition@007d0000 { /* MAC address and serial number */ + label = "vendor"; + reg = <0x007d0000 0x00010000>; /* 64KB */ + }; + + partition@007e0000 { + label = "RedBoot config"; + reg = <0x007e0000 0x00010000>; /* 64KB */ + }; + + partition@007f0000 { + label = "FIS directory"; + reg = <0x007f0000 0x00010000>; /* 64KB */ + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index a718866ba52d..a0903cd9c8c8 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -148,26 +148,6 @@ interrupts = <50>; }; - spi0: spi@10600 { - reg = <0x10600 0x28>; - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - interrupts = <30>; - clocks = <&coreclk 0>; - status = "disabled"; - }; - - spi1: spi@10680 { - reg = <0x10680 0x28>; - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - interrupts = <92>; - clocks = <&coreclk 0>; - status = "disabled"; - }; - i2c0: i2c@11000 { compatible = "marvell,mv64xxx-i2c"; #address-cells = <1>; @@ -320,6 +300,26 @@ status = "disabled"; }; }; + + spi0: spi@10600 { + reg = ; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + interrupts = <30>; + clocks = <&coreclk 0>; + status = "disabled"; + }; + + spi1: spi@10680 { + reg = ; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + interrupts = <92>; + clocks = <&coreclk 0>; + status = "disabled"; + }; }; clocks { diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index 3b06aa835448..b4258105e91f 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -134,24 +134,6 @@ wt-override; }; - /* - * Default SPI pinctrl setting, can be overwritten on - * board level if a different configuration is used. - */ - spi0: spi@10600 { - compatible = "marvell,armada-370-spi", - "marvell,orion-spi"; - pinctrl-0 = <&spi0_pins1>; - pinctrl-names = "default"; - }; - - spi1: spi@10680 { - compatible = "marvell,armada-370-spi", - "marvell,orion-spi"; - pinctrl-0 = <&spi1_pins>; - pinctrl-names = "default"; - }; - i2c0: i2c@11000 { reg = <0x11000 0x20>; }; @@ -447,3 +429,19 @@ marvell,function = "ge1"; }; }; + +/* + * Default SPI pinctrl setting, can be overwritten on + * board level if a different configuration is used. + */ +&spi0 { + compatible = "marvell,armada-370-spi", "marvell,orion-spi"; + pinctrl-0 = <&spi0_pins1>; + pinctrl-names = "default"; +}; + +&spi1 { + compatible = "marvell,armada-370-spi", "marvell,orion-spi"; + pinctrl-0 = <&spi1_pins>; + pinctrl-names = "default"; +}; diff --git a/arch/arm/boot/dts/armada-385-db-ap.dts b/arch/arm/boot/dts/armada-385-db-ap.dts index 2d3fd6e76e2c..ca38200a4f0d 100644 --- a/arch/arm/boot/dts/armada-385-db-ap.dts +++ b/arch/arm/boot/dts/armada-385-db-ap.dts @@ -65,20 +65,6 @@ MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>; internal-regs { - spi1: spi@10680 { - pinctrl-names = "default"; - pinctrl-0 = <&spi1_pins>; - status = "okay"; - - spi-flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,m25p128", "jedec,spi-nor"; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <54000000>; - }; - }; - i2c0: i2c@11000 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins>; @@ -239,3 +225,17 @@ gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; }; }; + +&spi1 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins>; + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p128", "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <54000000>; + }; +}; diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi index 22f7a13e20b4..8f0e508f64ae 100644 --- a/arch/arm/boot/dts/armada-385-linksys.dtsi +++ b/arch/arm/boot/dts/armada-385-linksys.dtsi @@ -62,11 +62,6 @@ MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>; internal-regs { - - spi@10600 { - status = "disabled"; - }; - i2c@11000 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins>; @@ -332,3 +327,7 @@ marvell,function = "gpio"; }; }; + +&spi0 { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/armada-388-clearfog.dts b/arch/arm/boot/dts/armada-388-clearfog.dts index 2e0556af6e5e..2d2593023fd0 100644 --- a/arch/arm/boot/dts/armada-388-clearfog.dts +++ b/arch/arm/boot/dts/armada-388-clearfog.dts @@ -315,30 +315,6 @@ status = "okay"; }; - spi@10680 { - /* - * We don't seem to have the W25Q32 on the - * A1 Rev 2.0 boards, so disable SPI. - * CS0: W25Q32 (doesn't appear to be present) - * CS1: - * CS2: mikrobus - */ - pinctrl-0 = <&spi1_pins - &clearfog_spi1_cs_pins - &mikro_spi_pins>; - pinctrl-names = "default"; - status = "okay"; - - spi-flash@0 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "w25q32", "jedec,spi-nor"; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <3000000>; - status = "disabled"; - }; - }; - usb@58000 { /* CON3, nearest power. */ status = "okay"; @@ -444,3 +420,27 @@ }; }; }; + +&spi1 { + /* + * We don't seem to have the W25Q32 on the + * A1 Rev 2.0 boards, so disable SPI. + * CS0: W25Q32 (doesn't appear to be present) + * CS1: + * CS2: mikrobus + */ + pinctrl-0 = <&spi1_pins + &clearfog_spi1_cs_pins + &mikro_spi_pins>; + pinctrl-names = "default"; + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "w25q32", "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <3000000>; + status = "disabled"; + }; +}; diff --git a/arch/arm/boot/dts/armada-388-db.dts b/arch/arm/boot/dts/armada-388-db.dts index ea93ed727030..de26c762239c 100644 --- a/arch/arm/boot/dts/armada-388-db.dts +++ b/arch/arm/boot/dts/armada-388-db.dts @@ -70,18 +70,6 @@ MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>; internal-regs { - spi@10600 { - status = "okay"; - - spi-flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "w25q32", "jedec,spi-nor"; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <108000000>; - }; - }; - i2c@11000 { status = "okay"; clock-frequency = <100000>; @@ -201,3 +189,16 @@ }; }; }; + +&spi0 { + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "w25q32", "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <108000000>; + }; +}; + diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/armada-388-gp.dts index fd75e5e9550f..895fa6cfa15a 100644 --- a/arch/arm/boot/dts/armada-388-gp.dts +++ b/arch/arm/boot/dts/armada-388-gp.dts @@ -64,21 +64,6 @@ MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>; internal-regs { - spi@10600 { - pinctrl-names = "default"; - pinctrl-0 = <&spi0_pins>; - status = "okay"; - - spi-flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,m25p128", "jedec,spi-nor"; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <50000000>; - m25p,fast-read; - }; - }; - i2c@11000 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins>; @@ -433,3 +418,18 @@ marvell,function = "gpio"; }; }; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>; + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p128", "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <50000000>; + m25p,fast-read; + }; +}; diff --git a/arch/arm/boot/dts/armada-388-rd.dts b/arch/arm/boot/dts/armada-388-rd.dts index 853f9735cc70..dd3462ddb6b9 100644 --- a/arch/arm/boot/dts/armada-388-rd.dts +++ b/arch/arm/boot/dts/armada-388-rd.dts @@ -70,18 +70,6 @@ MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>; internal-regs { - spi@10600 { - status = "okay"; - - spi-flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,m25p128", "jedec,spi-nor"; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <108000000>; - }; - }; - i2c@11000 { status = "okay"; clock-frequency = <100000>; @@ -142,3 +130,16 @@ }; }; }; + +&spi0 { + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p128", "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <108000000>; + }; +}; + diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index 3312be6c82cc..c065ecd8d36b 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -170,30 +170,6 @@ <0xc100 0x100>; }; - spi0: spi@10600 { - compatible = "marvell,armada-380-spi", - "marvell,orion-spi"; - reg = <0x10600 0x50>; - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - interrupts = ; - clocks = <&coreclk 0>; - status = "disabled"; - }; - - spi1: spi@10680 { - compatible = "marvell,armada-380-spi", - "marvell,orion-spi"; - reg = <0x10680 0x50>; - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - interrupts = ; - clocks = <&coreclk 0>; - status = "disabled"; - }; - i2c0: i2c@11000 { compatible = "marvell,mv64xxx-i2c"; reg = <0x11000 0x20>; @@ -649,6 +625,30 @@ no-memory-wc; status = "disabled"; }; + + spi0: spi@10600 { + compatible = "marvell,armada-380-spi", + "marvell,orion-spi"; + reg = ; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + interrupts = ; + clocks = <&coreclk 0>; + status = "disabled"; + }; + + spi1: spi@10680 { + compatible = "marvell,armada-380-spi", + "marvell,orion-spi"; + reg = ; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + interrupts = ; + clocks = <&coreclk 0>; + status = "disabled"; + }; }; clocks { diff --git a/arch/arm/boot/dts/armada-398-db.dts b/arch/arm/boot/dts/armada-398-db.dts index 788c3badb681..c5f14a767bce 100644 --- a/arch/arm/boot/dts/armada-398-db.dts +++ b/arch/arm/boot/dts/armada-398-db.dts @@ -65,30 +65,6 @@ MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>; internal-regs { - spi@10680 { - status = "okay"; - pinctrl-0 = <&spi1_pins>; - pinctrl-names = "default"; - - spi-flash@0 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "n25q128a13", "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <108000000>; - - partition@0 { - label = "U-Boot"; - reg = <0 0x400000>; - }; - - partition@400000 { - label = "Filesystem"; - reg = <0x400000 0x1000000>; - }; - }; - }; - i2c@11000 { pinctrl-0 = <&i2c0_pins>; pinctrl-names = "default"; @@ -151,3 +127,27 @@ }; }; }; + +&spi1 { + status = "okay"; + pinctrl-0 = <&spi1_pins>; + pinctrl-names = "default"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "n25q128a13", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <108000000>; + + partition@0 { + label = "U-Boot"; + reg = <0 0x400000>; + }; + + partition@400000 { + label = "Filesystem"; + reg = <0x400000 0x1000000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-39x.dtsi b/arch/arm/boot/dts/armada-39x.dtsi index dc6efd386dbc..251a2b6799d5 100644 --- a/arch/arm/boot/dts/armada-39x.dtsi +++ b/arch/arm/boot/dts/armada-39x.dtsi @@ -131,30 +131,6 @@ <0xc100 0x100>; }; - spi0: spi@10600 { - compatible = "marvell,armada-390-spi", - "marvell,orion-spi"; - reg = <0x10600 0x50>; - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - interrupts = ; - clocks = <&coreclk 0>; - status = "disabled"; - }; - - spi1: spi@10680 { - compatible = "marvell,armada-390-spi", - "marvell,orion-spi"; - reg = <0x10680 0x50>; - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - interrupts = ; - clocks = <&coreclk 0>; - status = "disabled"; - }; - i2c0: i2c@11000 { compatible = "marvell,mv64xxx-i2c"; reg = <0x11000 0x20>; @@ -501,6 +477,30 @@ status = "disabled"; }; }; + + spi0: spi@10600 { + compatible = "marvell,armada-390-spi", + "marvell,orion-spi"; + reg = ; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + interrupts = ; + clocks = <&coreclk 0>; + status = "disabled"; + }; + + spi1: spi@10680 { + compatible = "marvell,armada-390-spi", + "marvell,orion-spi"; + reg = ; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + interrupts = ; + clocks = <&coreclk 0>; + status = "disabled"; + }; }; clocks { diff --git a/arch/arm/boot/dts/armada-xp-axpwifiap.dts b/arch/arm/boot/dts/armada-xp-axpwifiap.dts index 5c21b236721f..ce152719bc28 100644 --- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts +++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts @@ -135,18 +135,6 @@ phy = <&phy1>; phy-mode = "rgmii-id"; }; - - spi0: spi@10600 { - status = "okay"; - - spi-flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "n25q128a13", "jedec,spi-nor"; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <108000000>; - }; - }; }; }; @@ -179,3 +167,15 @@ marvell,function = "gpio"; }; }; + +&spi0 { + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "n25q128a13", "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <108000000>; + }; +}; diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts index 62422a90aeb2..075120bc3ec4 100644 --- a/arch/arm/boot/dts/armada-xp-db.dts +++ b/arch/arm/boot/dts/armada-xp-db.dts @@ -231,18 +231,6 @@ status = "okay"; }; - spi0: spi@10600 { - status = "okay"; - - spi-flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "m25p64", "jedec,spi-nor"; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <20000000>; - }; - }; - nand@d0000 { status = "okay"; num-cs = <1>; @@ -277,3 +265,15 @@ }; }; }; + +&spi0 { + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p64", "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <20000000>; + }; +}; diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts index 061f4237760e..190e4eccb180 100644 --- a/arch/arm/boot/dts/armada-xp-gp.dts +++ b/arch/arm/boot/dts/armada-xp-gp.dts @@ -232,18 +232,6 @@ status = "okay"; }; - spi0: spi@10600 { - status = "okay"; - - spi-flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "n25q128a13", "jedec,spi-nor"; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <108000000>; - }; - }; - bm@c0000 { status = "okay"; }; @@ -262,3 +250,15 @@ }; }; }; + +&spi0 { + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "n25q128a13", "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <108000000>; + }; +}; diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts index 7a461541ce50..076f27f22c3b 100644 --- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts +++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts @@ -279,18 +279,6 @@ reg = <0x180000 0x780000>; /* 7.5MB */ }; }; - - spi0: spi@10600 { - status = "okay"; - - spi-flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "everspin,mr25h256"; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <40000000>; - }; - }; }; }; @@ -398,3 +386,15 @@ marvell,function = "gpio"; }; }; + +&spi0 { + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "everspin,mr25h256"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <40000000>; + }; +}; diff --git a/arch/arm/boot/dts/armada-xp-synology-ds414.dts b/arch/arm/boot/dts/armada-xp-synology-ds414.dts index d17dab0a6f51..ae286736b90a 100644 --- a/arch/arm/boot/dts/armada-xp-synology-ds414.dts +++ b/arch/arm/boot/dts/armada-xp-synology-ds414.dts @@ -110,62 +110,6 @@ status = "disabled"; }; - spi0: spi@10600 { - status = "okay"; - - spi-flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "micron,n25q064", "jedec,spi-nor"; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <20000000>; - - /* - * Warning! - * - * Synology u-boot uses its compiled-in environment - * and it seems Synology did not care to change u-boot - * default configuration in order to allow saving a - * modified environment at a sensible location. So, - * if you do a 'saveenv' under u-boot, your modified - * environment will be saved at 1MB after the start - * of the flash, i.e. in the middle of the uImage. - * For that reason, it is strongly advised not to - * change the default environment, unless you know - * what you are doing. - */ - partition@00000000 { /* u-boot */ - label = "RedBoot"; - reg = <0x00000000 0x000d0000>; /* 832KB */ - }; - - partition@000c0000 { /* uImage */ - label = "zImage"; - reg = <0x000d0000 0x002d0000>; /* 2880KB */ - }; - - partition@003a0000 { /* uInitramfs */ - label = "rd.gz"; - reg = <0x003a0000 0x00430000>; /* 4250KB */ - }; - - partition@007d0000 { /* MAC address and serial number */ - label = "vendor"; - reg = <0x007d0000 0x00010000>; /* 64KB */ - }; - - partition@007e0000 { - label = "RedBoot config"; - reg = <0x007e0000 0x00010000>; /* 64KB */ - }; - - partition@007f0000 { - label = "FIS directory"; - reg = <0x007f0000 0x00010000>; /* 64KB */ - }; - }; - }; - i2c@11000 { clock-frequency = <400000>; status = "okay"; @@ -362,3 +306,59 @@ marvell,function = "gpio"; }; }; + +&spi0 { + status = "okay"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "micron,n25q064", "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <20000000>; + + /* + * Warning! + * + * Synology u-boot uses its compiled-in environment + * and it seems Synology did not care to change u-boot + * default configuration in order to allow saving a + * modified environment at a sensible location. So, + * if you do a 'saveenv' under u-boot, your modified + * environment will be saved at 1MB after the start + * of the flash, i.e. in the middle of the uImage. + * For that reason, it is strongly advised not to + * change the default environment, unless you know + * what you are doing. + */ + partition@00000000 { /* u-boot */ + label = "RedBoot"; + reg = <0x00000000 0x000d0000>; /* 832KB */ + }; + + partition@000c0000 { /* uImage */ + label = "zImage"; + reg = <0x000d0000 0x002d0000>; /* 2880KB */ + }; + + partition@003a0000 { /* uInitramfs */ + label = "rd.gz"; + reg = <0x003a0000 0x00430000>; /* 4250KB */ + }; + + partition@007d0000 { /* MAC address and serial number */ + label = "vendor"; + reg = <0x007d0000 0x00010000>; /* 64KB */ + }; + + partition@007e0000 { + label = "RedBoot config"; + reg = <0x007e0000 0x00010000>; /* 64KB */ + }; + + partition@007f0000 { + label = "FIS directory"; + reg = <0x007f0000 0x00010000>; /* 64KB */ + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index 40337909ac4c..4a5f99e65b51 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -84,21 +84,6 @@ wt-override; }; - spi0: spi@10600 { - compatible = "marvell,armada-xp-spi", - "marvell,orion-spi"; - pinctrl-0 = <&spi0_pins>; - pinctrl-names = "default"; - }; - - spi1: spi@10680 { - compatible = "marvell,armada-xp-spi", - "marvell,orion-spi"; - pinctrl-0 = <&spi1_pins>; - pinctrl-names = "default"; - }; - - i2c0: i2c@11000 { compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c"; reg = <0x11000 0x100>; @@ -380,3 +365,15 @@ marvell,function = "uart3"; }; }; + +&spi0 { + compatible = "marvell,armada-xp-spi", "marvell,orion-spi"; + pinctrl-0 = <&spi0_pins>; + pinctrl-names = "default"; +}; + +&spi1 { + compatible = "marvell,armada-xp-spi", "marvell,orion-spi"; + pinctrl-0 = <&spi1_pins>; + pinctrl-names = "default"; +};