ARM: OMAP3: Fix hardware detection for omap3630 when booted with device tree
SoC family definitions at the moment are reactive to board needs as a result, beagle-xm would matchup with ti,omap3 which invokes omap3430_init_early instead of omap3630_init_early. Obviously, this is the wrong behavior. With clock node dts conversion, we get the following warnings before system hangs as a result and 3630 based platforms fails to boot (uart4 clocks are only present in OMAP3630 and not present in OMAP3430): ... omap_hwmod: uart4: cannot clk_get main_clk uart4_fck omap_hwmod: uart4: cannot _init_clocks WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2434 _init+0x6c/0x80() omap_hwmod: uart4: couldn't init clocks ... WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2126 _enable+0x254/0x280() omap_hwmod: timer12: enabled state can only be entered from initialized, idle, or disabled state ... WARNING: CPU: 0 PID: 46 at arch/arm/mach-omap2/omap_hwmod.c:2224 _idle+0xd4/0xf8() omap_hwmod: timer12: idle state can only be entered from enabled state WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2126 _enable+0x254/0x280() omap_hwmod: uart4: enabled state can only be entered from initialized, idle, or disabled state So, add specific compatiblity for 3630 to allow match for Beagle-XM platform. Signed-off-by: Nishanth Menon <nm@ti.com> [tony@atomide.com: left out ti,omap343x, updated comments] Signed-off-by: Tony Lindgren <tony@atomide.com>
This commit is contained in:
parent
1dc1c33879
commit
016c12d2fb
|
@ -11,7 +11,7 @@
|
|||
|
||||
/ {
|
||||
model = "TI OMAP3 BeagleBoard xM";
|
||||
compatible = "ti,omap3-beagle-xm", "ti,omap3-beagle", "ti,omap3";
|
||||
compatible = "ti,omap3-beagle-xm", "ti,omap36xx", "ti,omap3";
|
||||
|
||||
cpus {
|
||||
cpu@0 {
|
||||
|
|
|
@ -129,6 +129,24 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)")
|
|||
.restart = omap3xxx_restart,
|
||||
MACHINE_END
|
||||
|
||||
static const char *omap36xx_boards_compat[] __initdata = {
|
||||
"ti,omap36xx",
|
||||
NULL,
|
||||
};
|
||||
|
||||
DT_MACHINE_START(OMAP36XX_DT, "Generic OMAP36xx (Flattened Device Tree)")
|
||||
.reserve = omap_reserve,
|
||||
.map_io = omap3_map_io,
|
||||
.init_early = omap3630_init_early,
|
||||
.init_irq = omap_intc_of_init,
|
||||
.handle_irq = omap3_intc_handle_irq,
|
||||
.init_machine = omap_generic_init,
|
||||
.init_late = omap3_init_late,
|
||||
.init_time = omap3_sync32k_timer_init,
|
||||
.dt_compat = omap36xx_boards_compat,
|
||||
.restart = omap3xxx_restart,
|
||||
MACHINE_END
|
||||
|
||||
static const char *omap3_gp_boards_compat[] __initdata = {
|
||||
"ti,omap3-beagle",
|
||||
"timll,omap3-devkit8000",
|
||||
|
|
Loading…
Reference in a new issue