diff --git a/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935 b/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935
index 6708c5e264aa..33e96f740639 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935
+++ b/Documentation/ABI/testing/sysfs-bus-iio-proximity-as3935
@@ -1,4 +1,4 @@
-What		/sys/bus/iio/devices/iio:deviceX/in_proximity_raw
+What		/sys/bus/iio/devices/iio:deviceX/in_proximity_input
 Date:		March 2014
 KernelVersion:	3.15
 Contact:	Matt Ranostay <mranostay@gmail.com>
diff --git a/drivers/iio/accel/st_accel_buffer.c b/drivers/iio/accel/st_accel_buffer.c
index a1e642ee13d6..7fddc137e91e 100644
--- a/drivers/iio/accel/st_accel_buffer.c
+++ b/drivers/iio/accel/st_accel_buffer.c
@@ -91,7 +91,7 @@ static const struct iio_buffer_setup_ops st_accel_buffer_setup_ops = {
 
 int st_accel_allocate_ring(struct iio_dev *indio_dev)
 {
-	return iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
+	return iio_triggered_buffer_setup(indio_dev, NULL,
 		&st_sensors_trigger_handler, &st_accel_buffer_setup_ops);
 }
 
diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
index dc73f2d85e6d..4d95bfc4786c 100644
--- a/drivers/iio/accel/st_accel_core.c
+++ b/drivers/iio/accel/st_accel_core.c
@@ -741,6 +741,7 @@ static const struct iio_info accel_info = {
 static const struct iio_trigger_ops st_accel_trigger_ops = {
 	.owner = THIS_MODULE,
 	.set_trigger_state = ST_ACCEL_TRIGGER_SET_STATE,
+	.validate_device = st_sensors_validate_device,
 };
 #define ST_ACCEL_TRIGGER_OPS (&st_accel_trigger_ops)
 #else
diff --git a/drivers/iio/common/st_sensors/st_sensors_buffer.c b/drivers/iio/common/st_sensors/st_sensors_buffer.c
index c55898543a47..f1693dbebb8a 100644
--- a/drivers/iio/common/st_sensors/st_sensors_buffer.c
+++ b/drivers/iio/common/st_sensors/st_sensors_buffer.c
@@ -57,31 +57,20 @@ irqreturn_t st_sensors_trigger_handler(int irq, void *p)
 	struct iio_poll_func *pf = p;
 	struct iio_dev *indio_dev = pf->indio_dev;
 	struct st_sensor_data *sdata = iio_priv(indio_dev);
+	s64 timestamp;
 
-	/* If we have a status register, check if this IRQ came from us */
-	if (sdata->sensor_settings->drdy_irq.addr_stat_drdy) {
-		u8 status;
-
-		len = sdata->tf->read_byte(&sdata->tb, sdata->dev,
-			   sdata->sensor_settings->drdy_irq.addr_stat_drdy,
-			   &status);
-		if (len < 0)
-			dev_err(sdata->dev, "could not read channel status\n");
-
-		/*
-		 * If this was not caused by any channels on this sensor,
-		 * return IRQ_NONE
-		 */
-		if (!(status & (u8)indio_dev->active_scan_mask[0]))
-			return IRQ_NONE;
-	}
+	/* If we do timetamping here, do it before reading the values */
+	if (sdata->hw_irq_trigger)
+		timestamp = sdata->hw_timestamp;
+	else
+		timestamp = iio_get_time_ns();
 
 	len = st_sensors_get_buffer_element(indio_dev, sdata->buffer_data);
 	if (len < 0)
 		goto st_sensors_get_buffer_element_error;
 
 	iio_push_to_buffers_with_timestamp(indio_dev, sdata->buffer_data,
-		pf->timestamp);
+					   timestamp);
 
 st_sensors_get_buffer_element_error:
 	iio_trigger_notify_done(indio_dev->trig);
diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c
index dffe00692169..9e59c90f6a8d 100644
--- a/drivers/iio/common/st_sensors/st_sensors_core.c
+++ b/drivers/iio/common/st_sensors/st_sensors_core.c
@@ -363,6 +363,11 @@ int st_sensors_init_sensor(struct iio_dev *indio_dev,
 	if (err < 0)
 		return err;
 
+	/* Disable DRDY, this might be still be enabled after reboot. */
+	err = st_sensors_set_dataready_irq(indio_dev, false);
+	if (err < 0)
+		return err;
+
 	if (sdata->current_fullscale) {
 		err = st_sensors_set_fullscale(indio_dev,
 						sdata->current_fullscale->num);
@@ -424,6 +429,9 @@ int st_sensors_set_dataready_irq(struct iio_dev *indio_dev, bool enable)
 	else
 		drdy_mask = sdata->sensor_settings->drdy_irq.mask_int2;
 
+	/* Flag to the poll function that the hardware trigger is in use */
+	sdata->hw_irq_trigger = enable;
+
 	/* Enable/Disable the interrupt generator for data ready. */
 	err = st_sensors_write_data_with_mask(indio_dev,
 					sdata->sensor_settings->drdy_irq.addr,
diff --git a/drivers/iio/common/st_sensors/st_sensors_trigger.c b/drivers/iio/common/st_sensors/st_sensors_trigger.c
index da72279fcf99..296e4ff19ae8 100644
--- a/drivers/iio/common/st_sensors/st_sensors_trigger.c
+++ b/drivers/iio/common/st_sensors/st_sensors_trigger.c
@@ -17,6 +17,73 @@
 #include <linux/iio/common/st_sensors.h>
 #include "st_sensors_core.h"
 
+/**
+ * st_sensors_irq_handler() - top half of the IRQ-based triggers
+ * @irq: irq number
+ * @p: private handler data
+ */
+irqreturn_t st_sensors_irq_handler(int irq, void *p)
+{
+	struct iio_trigger *trig = p;
+	struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
+	struct st_sensor_data *sdata = iio_priv(indio_dev);
+
+	/* Get the time stamp as close in time as possible */
+	sdata->hw_timestamp = iio_get_time_ns();
+	return IRQ_WAKE_THREAD;
+}
+
+/**
+ * st_sensors_irq_thread() - bottom half of the IRQ-based triggers
+ * @irq: irq number
+ * @p: private handler data
+ */
+irqreturn_t st_sensors_irq_thread(int irq, void *p)
+{
+	struct iio_trigger *trig = p;
+	struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
+	struct st_sensor_data *sdata = iio_priv(indio_dev);
+	int ret;
+
+	/*
+	 * If this trigger is backed by a hardware interrupt and we have a
+	 * status register, check if this IRQ came from us
+	 */
+	if (sdata->sensor_settings->drdy_irq.addr_stat_drdy) {
+		u8 status;
+
+		ret = sdata->tf->read_byte(&sdata->tb, sdata->dev,
+			   sdata->sensor_settings->drdy_irq.addr_stat_drdy,
+			   &status);
+		if (ret < 0) {
+			dev_err(sdata->dev, "could not read channel status\n");
+			goto out_poll;
+		}
+		/*
+		 * the lower bits of .active_scan_mask[0] is directly mapped
+		 * to the channels on the sensor: either bit 0 for
+		 * one-dimensional sensors, or e.g. x,y,z for accelerometers,
+		 * gyroscopes or magnetometers. No sensor use more than 3
+		 * channels, so cut the other status bits here.
+		 */
+		status &= 0x07;
+
+		/*
+		 * If this was not caused by any channels on this sensor,
+		 * return IRQ_NONE
+		 */
+		if (!indio_dev->active_scan_mask)
+			return IRQ_NONE;
+		if (!(status & (u8)indio_dev->active_scan_mask[0]))
+			return IRQ_NONE;
+	}
+
+out_poll:
+	/* It's our IRQ: proceed to handle the register polling */
+	iio_trigger_poll_chained(p);
+	return IRQ_HANDLED;
+}
+
 int st_sensors_allocate_trigger(struct iio_dev *indio_dev,
 				const struct iio_trigger_ops *trigger_ops)
 {
@@ -30,6 +97,10 @@ int st_sensors_allocate_trigger(struct iio_dev *indio_dev,
 		return -ENOMEM;
 	}
 
+	iio_trigger_set_drvdata(sdata->trig, indio_dev);
+	sdata->trig->ops = trigger_ops;
+	sdata->trig->dev.parent = sdata->dev;
+
 	irq = sdata->get_irq_data_ready(indio_dev);
 	irq_trig = irqd_get_trigger_type(irq_get_irq_data(irq));
 	/*
@@ -77,9 +148,12 @@ int st_sensors_allocate_trigger(struct iio_dev *indio_dev,
 	    sdata->sensor_settings->drdy_irq.addr_stat_drdy)
 		irq_trig |= IRQF_SHARED;
 
-	err = request_threaded_irq(irq,
-			iio_trigger_generic_data_rdy_poll,
-			NULL,
+	/* Let's create an interrupt thread masking the hard IRQ here */
+	irq_trig |= IRQF_ONESHOT;
+
+	err = request_threaded_irq(sdata->get_irq_data_ready(indio_dev),
+			st_sensors_irq_handler,
+			st_sensors_irq_thread,
 			irq_trig,
 			sdata->trig->name,
 			sdata->trig);
@@ -88,10 +162,6 @@ int st_sensors_allocate_trigger(struct iio_dev *indio_dev,
 		goto iio_trigger_free;
 	}
 
-	iio_trigger_set_drvdata(sdata->trig, indio_dev);
-	sdata->trig->ops = trigger_ops;
-	sdata->trig->dev.parent = sdata->dev;
-
 	err = iio_trigger_register(sdata->trig);
 	if (err < 0) {
 		dev_err(&indio_dev->dev, "failed to register iio trigger.\n");
@@ -119,6 +189,18 @@ void st_sensors_deallocate_trigger(struct iio_dev *indio_dev)
 }
 EXPORT_SYMBOL(st_sensors_deallocate_trigger);
 
+int st_sensors_validate_device(struct iio_trigger *trig,
+			       struct iio_dev *indio_dev)
+{
+	struct iio_dev *indio = iio_trigger_get_drvdata(trig);
+
+	if (indio != indio_dev)
+		return -EINVAL;
+
+	return 0;
+}
+EXPORT_SYMBOL(st_sensors_validate_device);
+
 MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
 MODULE_DESCRIPTION("STMicroelectronics ST-sensors trigger");
 MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/dac/ad5592r-base.c b/drivers/iio/dac/ad5592r-base.c
index 948f600e7059..69bde5909854 100644
--- a/drivers/iio/dac/ad5592r-base.c
+++ b/drivers/iio/dac/ad5592r-base.c
@@ -525,7 +525,7 @@ static int ad5592r_alloc_channels(struct ad5592r_state *st)
 
 	device_for_each_child_node(st->dev, child) {
 		ret = fwnode_property_read_u32(child, "reg", &reg);
-		if (ret || reg > ARRAY_SIZE(st->channel_modes))
+		if (ret || reg >= ARRAY_SIZE(st->channel_modes))
 			continue;
 
 		ret = fwnode_property_read_u32(child, "adi,mode", &tmp);
diff --git a/drivers/iio/gyro/st_gyro_buffer.c b/drivers/iio/gyro/st_gyro_buffer.c
index d67b17b6a7aa..a5377044e42f 100644
--- a/drivers/iio/gyro/st_gyro_buffer.c
+++ b/drivers/iio/gyro/st_gyro_buffer.c
@@ -91,7 +91,7 @@ static const struct iio_buffer_setup_ops st_gyro_buffer_setup_ops = {
 
 int st_gyro_allocate_ring(struct iio_dev *indio_dev)
 {
-	return iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
+	return iio_triggered_buffer_setup(indio_dev, NULL,
 		&st_sensors_trigger_handler, &st_gyro_buffer_setup_ops);
 }
 
diff --git a/drivers/iio/gyro/st_gyro_core.c b/drivers/iio/gyro/st_gyro_core.c
index 52a3c87c375c..a8012955a1f6 100644
--- a/drivers/iio/gyro/st_gyro_core.c
+++ b/drivers/iio/gyro/st_gyro_core.c
@@ -409,6 +409,7 @@ static const struct iio_info gyro_info = {
 static const struct iio_trigger_ops st_gyro_trigger_ops = {
 	.owner = THIS_MODULE,
 	.set_trigger_state = ST_GYRO_TRIGGER_SET_STATE,
+	.validate_device = st_sensors_validate_device,
 };
 #define ST_GYRO_TRIGGER_OPS (&st_gyro_trigger_ops)
 #else
diff --git a/drivers/iio/humidity/am2315.c b/drivers/iio/humidity/am2315.c
index 3be6d209a159..11535911a5c6 100644
--- a/drivers/iio/humidity/am2315.c
+++ b/drivers/iio/humidity/am2315.c
@@ -165,10 +165,8 @@ static irqreturn_t am2315_trigger_handler(int irq, void *p)
 	struct am2315_sensor_data sensor_data;
 
 	ret = am2315_read_data(data, &sensor_data);
-	if (ret < 0) {
-		mutex_unlock(&data->lock);
+	if (ret < 0)
 		goto err;
-	}
 
 	mutex_lock(&data->lock);
 	if (*(indio_dev->active_scan_mask) == AM2315_ALL_CHANNEL_MASK) {
diff --git a/drivers/iio/humidity/hdc100x.c b/drivers/iio/humidity/hdc100x.c
index fa4767613173..a03832a5fc95 100644
--- a/drivers/iio/humidity/hdc100x.c
+++ b/drivers/iio/humidity/hdc100x.c
@@ -55,7 +55,7 @@ static const struct {
 	},
 	{ /* IIO_HUMIDITYRELATIVE channel */
 		.shift = 8,
-		.mask = 2,
+		.mask = 3,
 	},
 };
 
@@ -164,14 +164,14 @@ static int hdc100x_get_measurement(struct hdc100x_data *data,
 		dev_err(&client->dev, "cannot read high byte measurement");
 		return ret;
 	}
-	val = ret << 6;
+	val = ret << 8;
 
 	ret = i2c_smbus_read_byte(client);
 	if (ret < 0) {
 		dev_err(&client->dev, "cannot read low byte measurement");
 		return ret;
 	}
-	val |= ret >> 2;
+	val |= ret;
 
 	return val;
 }
@@ -211,18 +211,18 @@ static int hdc100x_read_raw(struct iio_dev *indio_dev,
 		return IIO_VAL_INT_PLUS_MICRO;
 	case IIO_CHAN_INFO_SCALE:
 		if (chan->type == IIO_TEMP) {
-			*val = 165;
-			*val2 = 65536 >> 2;
+			*val = 165000;
+			*val2 = 65536;
 			return IIO_VAL_FRACTIONAL;
 		} else {
-			*val = 0;
-			*val2 = 10000;
-			return IIO_VAL_INT_PLUS_MICRO;
+			*val = 100;
+			*val2 = 65536;
+			return IIO_VAL_FRACTIONAL;
 		}
 		break;
 	case IIO_CHAN_INFO_OFFSET:
-		*val = -3971;
-		*val2 = 879096;
+		*val = -15887;
+		*val2 = 515151;
 		return IIO_VAL_INT_PLUS_MICRO;
 	default:
 		return -EINVAL;
diff --git a/drivers/iio/imu/bmi160/bmi160_core.c b/drivers/iio/imu/bmi160/bmi160_core.c
index 0bf92b06d7d8..b8a290ec984e 100644
--- a/drivers/iio/imu/bmi160/bmi160_core.c
+++ b/drivers/iio/imu/bmi160/bmi160_core.c
@@ -209,11 +209,11 @@ static const struct  bmi160_scale_item bmi160_scale_table[] = {
 };
 
 static const struct bmi160_odr bmi160_accel_odr[] = {
-	{0x01, 0, 78125},
-	{0x02, 1, 5625},
-	{0x03, 3, 125},
-	{0x04, 6, 25},
-	{0x05, 12, 5},
+	{0x01, 0, 781250},
+	{0x02, 1, 562500},
+	{0x03, 3, 125000},
+	{0x04, 6, 250000},
+	{0x05, 12, 500000},
 	{0x06, 25, 0},
 	{0x07, 50, 0},
 	{0x08, 100, 0},
@@ -229,7 +229,7 @@ static const struct bmi160_odr bmi160_gyro_odr[] = {
 	{0x08, 100, 0},
 	{0x09, 200, 0},
 	{0x0A, 400, 0},
-	{0x0B, 8000, 0},
+	{0x0B, 800, 0},
 	{0x0C, 1600, 0},
 	{0x0D, 3200, 0},
 };
@@ -364,8 +364,8 @@ int bmi160_set_odr(struct bmi160_data *data, enum bmi160_sensor_type t,
 
 	return regmap_update_bits(data->regmap,
 				  bmi160_regs[t].config,
-				  bmi160_odr_table[t].tbl[i].bits,
-				  bmi160_regs[t].config_odr_mask);
+				  bmi160_regs[t].config_odr_mask,
+				  bmi160_odr_table[t].tbl[i].bits);
 }
 
 static int bmi160_get_odr(struct bmi160_data *data, enum bmi160_sensor_type t,
diff --git a/drivers/iio/industrialio-trigger.c b/drivers/iio/industrialio-trigger.c
index ae2806aafb72..0c52dfe64977 100644
--- a/drivers/iio/industrialio-trigger.c
+++ b/drivers/iio/industrialio-trigger.c
@@ -210,22 +210,35 @@ static int iio_trigger_attach_poll_func(struct iio_trigger *trig,
 
 	/* Prevent the module from being removed whilst attached to a trigger */
 	__module_get(pf->indio_dev->info->driver_module);
+
+	/* Get irq number */
 	pf->irq = iio_trigger_get_irq(trig);
+	if (pf->irq < 0)
+		goto out_put_module;
+
+	/* Request irq */
 	ret = request_threaded_irq(pf->irq, pf->h, pf->thread,
 				   pf->type, pf->name,
 				   pf);
-	if (ret < 0) {
-		module_put(pf->indio_dev->info->driver_module);
-		return ret;
-	}
+	if (ret < 0)
+		goto out_put_irq;
 
+	/* Enable trigger in driver */
 	if (trig->ops && trig->ops->set_trigger_state && notinuse) {
 		ret = trig->ops->set_trigger_state(trig, true);
 		if (ret < 0)
-			module_put(pf->indio_dev->info->driver_module);
+			goto out_free_irq;
 	}
 
 	return ret;
+
+out_free_irq:
+	free_irq(pf->irq, pf);
+out_put_irq:
+	iio_trigger_put_irq(trig, pf->irq);
+out_put_module:
+	module_put(pf->indio_dev->info->driver_module);
+	return ret;
 }
 
 static int iio_trigger_detach_poll_func(struct iio_trigger *trig,
diff --git a/drivers/iio/light/apds9960.c b/drivers/iio/light/apds9960.c
index b4dbb3912977..651d57b8abbf 100644
--- a/drivers/iio/light/apds9960.c
+++ b/drivers/iio/light/apds9960.c
@@ -1011,6 +1011,7 @@ static int apds9960_probe(struct i2c_client *client,
 
 	iio_device_attach_buffer(indio_dev, buffer);
 
+	indio_dev->dev.parent = &client->dev;
 	indio_dev->info = &apds9960_info;
 	indio_dev->name = APDS9960_DRV_NAME;
 	indio_dev->channels = apds9960_channels;
diff --git a/drivers/iio/light/bh1780.c b/drivers/iio/light/bh1780.c
index 72b364e4aa72..b54dcba05a82 100644
--- a/drivers/iio/light/bh1780.c
+++ b/drivers/iio/light/bh1780.c
@@ -84,7 +84,7 @@ static int bh1780_debugfs_reg_access(struct iio_dev *indio_dev,
 	int ret;
 
 	if (!readval)
-		bh1780_write(bh1780, (u8)reg, (u8)writeval);
+		return bh1780_write(bh1780, (u8)reg, (u8)writeval);
 
 	ret = bh1780_read(bh1780, (u8)reg);
 	if (ret < 0)
@@ -187,7 +187,7 @@ static int bh1780_probe(struct i2c_client *client,
 
 	indio_dev->dev.parent = &client->dev;
 	indio_dev->info = &bh1780_info;
-	indio_dev->name = id->name;
+	indio_dev->name = "bh1780";
 	indio_dev->channels = bh1780_channels;
 	indio_dev->num_channels = ARRAY_SIZE(bh1780_channels);
 	indio_dev->modes = INDIO_DIRECT_MODE;
@@ -226,7 +226,8 @@ static int bh1780_remove(struct i2c_client *client)
 static int bh1780_runtime_suspend(struct device *dev)
 {
 	struct i2c_client *client = to_i2c_client(dev);
-	struct bh1780_data *bh1780 = i2c_get_clientdata(client);
+	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+	struct bh1780_data *bh1780 = iio_priv(indio_dev);
 	int ret;
 
 	ret = bh1780_write(bh1780, BH1780_REG_CONTROL, BH1780_POFF);
@@ -241,7 +242,8 @@ static int bh1780_runtime_suspend(struct device *dev)
 static int bh1780_runtime_resume(struct device *dev)
 {
 	struct i2c_client *client = to_i2c_client(dev);
-	struct bh1780_data *bh1780 = i2c_get_clientdata(client);
+	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+	struct bh1780_data *bh1780 = iio_priv(indio_dev);
 	int ret;
 
 	ret = bh1780_write(bh1780, BH1780_REG_CONTROL, BH1780_PON);
diff --git a/drivers/iio/light/max44000.c b/drivers/iio/light/max44000.c
index e01e58a9bd14..f17cb2ea18f5 100644
--- a/drivers/iio/light/max44000.c
+++ b/drivers/iio/light/max44000.c
@@ -147,7 +147,6 @@ static const struct iio_chan_spec max44000_channels[] = {
 	{
 		.type = IIO_PROXIMITY,
 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
-		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
 		.scan_index = MAX44000_SCAN_INDEX_PRX,
 		.scan_type = {
 			.sign		= 'u',
diff --git a/drivers/iio/magnetometer/st_magn_buffer.c b/drivers/iio/magnetometer/st_magn_buffer.c
index ecd3bd0a9769..0a9e8fadfa9d 100644
--- a/drivers/iio/magnetometer/st_magn_buffer.c
+++ b/drivers/iio/magnetometer/st_magn_buffer.c
@@ -82,7 +82,7 @@ static const struct iio_buffer_setup_ops st_magn_buffer_setup_ops = {
 
 int st_magn_allocate_ring(struct iio_dev *indio_dev)
 {
-	return iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
+	return iio_triggered_buffer_setup(indio_dev, NULL,
 		&st_sensors_trigger_handler, &st_magn_buffer_setup_ops);
 }
 
diff --git a/drivers/iio/magnetometer/st_magn_core.c b/drivers/iio/magnetometer/st_magn_core.c
index 62036d2a9956..8250fc322c56 100644
--- a/drivers/iio/magnetometer/st_magn_core.c
+++ b/drivers/iio/magnetometer/st_magn_core.c
@@ -572,6 +572,7 @@ static const struct iio_info magn_info = {
 static const struct iio_trigger_ops st_magn_trigger_ops = {
 	.owner = THIS_MODULE,
 	.set_trigger_state = ST_MAGN_TRIGGER_SET_STATE,
+	.validate_device = st_sensors_validate_device,
 };
 #define ST_MAGN_TRIGGER_OPS (&st_magn_trigger_ops)
 #else
diff --git a/drivers/iio/pressure/bmp280.c b/drivers/iio/pressure/bmp280.c
index 2f1498e12bb2..724452d61846 100644
--- a/drivers/iio/pressure/bmp280.c
+++ b/drivers/iio/pressure/bmp280.c
@@ -879,8 +879,8 @@ static int bmp280_probe(struct i2c_client *client,
 	if (ret < 0)
 		return ret;
 	if (chip_id != id->driver_data) {
-		dev_err(&client->dev, "bad chip id.  expected %x got %x\n",
-			BMP280_CHIP_ID, chip_id);
+		dev_err(&client->dev, "bad chip id.  expected %lx got %x\n",
+			id->driver_data, chip_id);
 		return -EINVAL;
 	}
 
diff --git a/drivers/iio/pressure/st_pressure_buffer.c b/drivers/iio/pressure/st_pressure_buffer.c
index 2ff53f222352..99468d0a64e7 100644
--- a/drivers/iio/pressure/st_pressure_buffer.c
+++ b/drivers/iio/pressure/st_pressure_buffer.c
@@ -82,7 +82,7 @@ static const struct iio_buffer_setup_ops st_press_buffer_setup_ops = {
 
 int st_press_allocate_ring(struct iio_dev *indio_dev)
 {
-	return iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
+	return iio_triggered_buffer_setup(indio_dev, NULL,
 		&st_sensors_trigger_handler, &st_press_buffer_setup_ops);
 }
 
diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c
index 9e9b72a8f18f..92a118c3c4ac 100644
--- a/drivers/iio/pressure/st_pressure_core.c
+++ b/drivers/iio/pressure/st_pressure_core.c
@@ -28,15 +28,21 @@
 #include <linux/iio/common/st_sensors.h>
 #include "st_pressure.h"
 
+#define MCELSIUS_PER_CELSIUS			1000
+
+/* Default pressure sensitivity */
 #define ST_PRESS_LSB_PER_MBAR			4096UL
 #define ST_PRESS_KPASCAL_NANO_SCALE		(100000000UL / \
 						 ST_PRESS_LSB_PER_MBAR)
+
+/* Default temperature sensitivity */
 #define ST_PRESS_LSB_PER_CELSIUS		480UL
-#define ST_PRESS_CELSIUS_NANO_SCALE		(1000000000UL / \
-						 ST_PRESS_LSB_PER_CELSIUS)
+#define ST_PRESS_MILLI_CELSIUS_OFFSET		42500UL
+
 #define ST_PRESS_NUMBER_DATA_CHANNELS		1
 
 /* FULLSCALE */
+#define ST_PRESS_FS_AVL_1100MB			1100
 #define ST_PRESS_FS_AVL_1260MB			1260
 
 #define ST_PRESS_1_OUT_XL_ADDR			0x28
@@ -54,9 +60,6 @@
 #define ST_PRESS_LPS331AP_PW_MASK		0x80
 #define ST_PRESS_LPS331AP_FS_ADDR		0x23
 #define ST_PRESS_LPS331AP_FS_MASK		0x30
-#define ST_PRESS_LPS331AP_FS_AVL_1260_VAL	0x00
-#define ST_PRESS_LPS331AP_FS_AVL_1260_GAIN	ST_PRESS_KPASCAL_NANO_SCALE
-#define ST_PRESS_LPS331AP_FS_AVL_TEMP_GAIN	ST_PRESS_CELSIUS_NANO_SCALE
 #define ST_PRESS_LPS331AP_BDU_ADDR		0x20
 #define ST_PRESS_LPS331AP_BDU_MASK		0x04
 #define ST_PRESS_LPS331AP_DRDY_IRQ_ADDR		0x22
@@ -67,9 +70,14 @@
 #define ST_PRESS_LPS331AP_OD_IRQ_ADDR		0x22
 #define ST_PRESS_LPS331AP_OD_IRQ_MASK		0x40
 #define ST_PRESS_LPS331AP_MULTIREAD_BIT		true
-#define ST_PRESS_LPS331AP_TEMP_OFFSET		42500
 
 /* CUSTOM VALUES FOR LPS001WP SENSOR */
+
+/* LPS001WP pressure resolution */
+#define ST_PRESS_LPS001WP_LSB_PER_MBAR		16UL
+/* LPS001WP temperature resolution */
+#define ST_PRESS_LPS001WP_LSB_PER_CELSIUS	64UL
+
 #define ST_PRESS_LPS001WP_WAI_EXP		0xba
 #define ST_PRESS_LPS001WP_ODR_ADDR		0x20
 #define ST_PRESS_LPS001WP_ODR_MASK		0x30
@@ -78,6 +86,8 @@
 #define ST_PRESS_LPS001WP_ODR_AVL_13HZ_VAL	0x03
 #define ST_PRESS_LPS001WP_PW_ADDR		0x20
 #define ST_PRESS_LPS001WP_PW_MASK		0x40
+#define ST_PRESS_LPS001WP_FS_AVL_PRESS_GAIN \
+	(100000000UL / ST_PRESS_LPS001WP_LSB_PER_MBAR)
 #define ST_PRESS_LPS001WP_BDU_ADDR		0x20
 #define ST_PRESS_LPS001WP_BDU_MASK		0x04
 #define ST_PRESS_LPS001WP_MULTIREAD_BIT		true
@@ -94,11 +104,6 @@
 #define ST_PRESS_LPS25H_ODR_AVL_25HZ_VAL	0x04
 #define ST_PRESS_LPS25H_PW_ADDR			0x20
 #define ST_PRESS_LPS25H_PW_MASK			0x80
-#define ST_PRESS_LPS25H_FS_ADDR			0x00
-#define ST_PRESS_LPS25H_FS_MASK			0x00
-#define ST_PRESS_LPS25H_FS_AVL_1260_VAL		0x00
-#define ST_PRESS_LPS25H_FS_AVL_1260_GAIN	ST_PRESS_KPASCAL_NANO_SCALE
-#define ST_PRESS_LPS25H_FS_AVL_TEMP_GAIN	ST_PRESS_CELSIUS_NANO_SCALE
 #define ST_PRESS_LPS25H_BDU_ADDR		0x20
 #define ST_PRESS_LPS25H_BDU_MASK		0x04
 #define ST_PRESS_LPS25H_DRDY_IRQ_ADDR		0x23
@@ -109,7 +114,6 @@
 #define ST_PRESS_LPS25H_OD_IRQ_ADDR		0x22
 #define ST_PRESS_LPS25H_OD_IRQ_MASK		0x40
 #define ST_PRESS_LPS25H_MULTIREAD_BIT		true
-#define ST_PRESS_LPS25H_TEMP_OFFSET		42500
 #define ST_PRESS_LPS25H_OUT_XL_ADDR		0x28
 #define ST_TEMP_LPS25H_OUT_L_ADDR		0x2b
 
@@ -161,7 +165,9 @@ static const struct iio_chan_spec st_press_lps001wp_channels[] = {
 			.storagebits = 16,
 			.endianness = IIO_LE,
 		},
-		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.info_mask_separate =
+			BIT(IIO_CHAN_INFO_RAW) |
+			BIT(IIO_CHAN_INFO_SCALE),
 		.modified = 0,
 	},
 	{
@@ -177,7 +183,7 @@ static const struct iio_chan_spec st_press_lps001wp_channels[] = {
 		},
 		.info_mask_separate =
 			BIT(IIO_CHAN_INFO_RAW) |
-			BIT(IIO_CHAN_INFO_OFFSET),
+			BIT(IIO_CHAN_INFO_SCALE),
 		.modified = 0,
 	},
 	IIO_CHAN_SOFT_TIMESTAMP(1)
@@ -212,11 +218,14 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
 			.addr = ST_PRESS_LPS331AP_FS_ADDR,
 			.mask = ST_PRESS_LPS331AP_FS_MASK,
 			.fs_avl = {
+				/*
+				 * Pressure and temperature sensitivity values
+				 * as defined in table 3 of LPS331AP datasheet.
+				 */
 				[0] = {
 					.num = ST_PRESS_FS_AVL_1260MB,
-					.value = ST_PRESS_LPS331AP_FS_AVL_1260_VAL,
-					.gain = ST_PRESS_LPS331AP_FS_AVL_1260_GAIN,
-					.gain2 = ST_PRESS_LPS331AP_FS_AVL_TEMP_GAIN,
+					.gain = ST_PRESS_KPASCAL_NANO_SCALE,
+					.gain2 = ST_PRESS_LSB_PER_CELSIUS,
 				},
 			},
 		},
@@ -261,7 +270,17 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
 			.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
 		},
 		.fs = {
-			.addr = 0,
+			.fs_avl = {
+				/*
+				 * Pressure and temperature resolution values
+				 * as defined in table 3 of LPS001WP datasheet.
+				 */
+				[0] = {
+					.num = ST_PRESS_FS_AVL_1100MB,
+					.gain = ST_PRESS_LPS001WP_FS_AVL_PRESS_GAIN,
+					.gain2 = ST_PRESS_LPS001WP_LSB_PER_CELSIUS,
+				},
+			},
 		},
 		.bdu = {
 			.addr = ST_PRESS_LPS001WP_BDU_ADDR,
@@ -298,14 +317,15 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
 			.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
 		},
 		.fs = {
-			.addr = ST_PRESS_LPS25H_FS_ADDR,
-			.mask = ST_PRESS_LPS25H_FS_MASK,
 			.fs_avl = {
+				/*
+				 * Pressure and temperature sensitivity values
+				 * as defined in table 3 of LPS25H datasheet.
+				 */
 				[0] = {
 					.num = ST_PRESS_FS_AVL_1260MB,
-					.value = ST_PRESS_LPS25H_FS_AVL_1260_VAL,
-					.gain = ST_PRESS_LPS25H_FS_AVL_1260_GAIN,
-					.gain2 = ST_PRESS_LPS25H_FS_AVL_TEMP_GAIN,
+					.gain = ST_PRESS_KPASCAL_NANO_SCALE,
+					.gain2 = ST_PRESS_LSB_PER_CELSIUS,
 				},
 			},
 		},
@@ -364,26 +384,26 @@ static int st_press_read_raw(struct iio_dev *indio_dev,
 
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_SCALE:
-		*val = 0;
-
 		switch (ch->type) {
 		case IIO_PRESSURE:
+			*val = 0;
 			*val2 = press_data->current_fullscale->gain;
-			break;
+			return IIO_VAL_INT_PLUS_NANO;
 		case IIO_TEMP:
+			*val = MCELSIUS_PER_CELSIUS;
 			*val2 = press_data->current_fullscale->gain2;
-			break;
+			return IIO_VAL_FRACTIONAL;
 		default:
 			err = -EINVAL;
 			goto read_error;
 		}
 
-		return IIO_VAL_INT_PLUS_NANO;
 	case IIO_CHAN_INFO_OFFSET:
 		switch (ch->type) {
 		case IIO_TEMP:
-			*val = 425;
-			*val2 = 10;
+			*val = ST_PRESS_MILLI_CELSIUS_OFFSET *
+			       press_data->current_fullscale->gain2;
+			*val2 = MCELSIUS_PER_CELSIUS;
 			break;
 		default:
 			err = -EINVAL;
@@ -425,6 +445,7 @@ static const struct iio_info press_info = {
 static const struct iio_trigger_ops st_press_trigger_ops = {
 	.owner = THIS_MODULE,
 	.set_trigger_state = ST_PRESS_TRIGGER_SET_STATE,
+	.validate_device = st_sensors_validate_device,
 };
 #define ST_PRESS_TRIGGER_OPS (&st_press_trigger_ops)
 #else
diff --git a/drivers/iio/proximity/as3935.c b/drivers/iio/proximity/as3935.c
index f4d29d5dbd5f..e2f926cdcad2 100644
--- a/drivers/iio/proximity/as3935.c
+++ b/drivers/iio/proximity/as3935.c
@@ -64,6 +64,7 @@ struct as3935_state {
 	struct delayed_work work;
 
 	u32 tune_cap;
+	u8 buffer[16]; /* 8-bit data + 56-bit padding + 64-bit timestamp */
 	u8 buf[2] ____cacheline_aligned;
 };
 
@@ -72,7 +73,8 @@ static const struct iio_chan_spec as3935_channels[] = {
 		.type           = IIO_PROXIMITY,
 		.info_mask_separate =
 			BIT(IIO_CHAN_INFO_RAW) |
-			BIT(IIO_CHAN_INFO_PROCESSED),
+			BIT(IIO_CHAN_INFO_PROCESSED) |
+			BIT(IIO_CHAN_INFO_SCALE),
 		.scan_index     = 0,
 		.scan_type = {
 			.sign           = 'u',
@@ -181,7 +183,12 @@ static int as3935_read_raw(struct iio_dev *indio_dev,
 		/* storm out of range */
 		if (*val == AS3935_DATA_MASK)
 			return -EINVAL;
-		*val *= 1000;
+
+		if (m == IIO_CHAN_INFO_PROCESSED)
+			*val *= 1000;
+		break;
+	case IIO_CHAN_INFO_SCALE:
+		*val = 1000;
 		break;
 	default:
 		return -EINVAL;
@@ -206,10 +213,10 @@ static irqreturn_t as3935_trigger_handler(int irq, void *private)
 	ret = as3935_read(st, AS3935_DATA, &val);
 	if (ret)
 		goto err_read;
-	val &= AS3935_DATA_MASK;
-	val *= 1000;
 
-	iio_push_to_buffers_with_timestamp(indio_dev, &val, pf->timestamp);
+	st->buffer[0] = val & AS3935_DATA_MASK;
+	iio_push_to_buffers_with_timestamp(indio_dev, &st->buffer,
+					   pf->timestamp);
 err_read:
 	iio_trigger_notify_done(indio_dev->trig);
 
diff --git a/include/linux/iio/common/st_sensors.h b/include/linux/iio/common/st_sensors.h
index d029ffac0d69..99403b19092f 100644
--- a/include/linux/iio/common/st_sensors.h
+++ b/include/linux/iio/common/st_sensors.h
@@ -223,6 +223,8 @@ struct st_sensor_settings {
  * @get_irq_data_ready: Function to get the IRQ used for data ready signal.
  * @tf: Transfer function structure used by I/O operations.
  * @tb: Transfer buffers and mutex used by I/O operations.
+ * @hw_irq_trigger: if we're using the hardware interrupt on the sensor.
+ * @hw_timestamp: Latest timestamp from the interrupt handler, when in use.
  */
 struct st_sensor_data {
 	struct device *dev;
@@ -247,6 +249,9 @@ struct st_sensor_data {
 
 	const struct st_sensor_transfer_function *tf;
 	struct st_sensor_transfer_buffer tb;
+
+	bool hw_irq_trigger;
+	s64 hw_timestamp;
 };
 
 #ifdef CONFIG_IIO_BUFFER
@@ -260,7 +265,8 @@ int st_sensors_allocate_trigger(struct iio_dev *indio_dev,
 				const struct iio_trigger_ops *trigger_ops);
 
 void st_sensors_deallocate_trigger(struct iio_dev *indio_dev);
-
+int st_sensors_validate_device(struct iio_trigger *trig,
+			       struct iio_dev *indio_dev);
 #else
 static inline int st_sensors_allocate_trigger(struct iio_dev *indio_dev,
 				const struct iio_trigger_ops *trigger_ops)
@@ -271,6 +277,7 @@ static inline void st_sensors_deallocate_trigger(struct iio_dev *indio_dev)
 {
 	return;
 }
+#define st_sensors_validate_device NULL
 #endif
 
 int st_sensors_init_sensor(struct iio_dev *indio_dev,