redonkable/remarkable-linux
redonkable/remarkable-linux
1
0
Fork 0
Code Releases Activity

AHCI: Clear GHC.IS to prevent unexpectly asserting INTx

Browse source 
Due to PCI subsystem behaviour, unloading AHCI driver will disable
MSI and enable INTx. When HBA supports MSIx or Multiple MSI, Driver's
irq handler doesn't clear GHC.IS register. It works well when reading or
writing data and GHC.IS is always non-zero. But when unloading driver
(or any other operation which causes disable MSIx and enable INTx), PCI
 subsystem uses config write(Rx04.bit10) to enable INTx. Because
GHC.IS is non-zero, HBA will falsely assume some port needs interrupt
service. Then it asserts INTx. To make things worse, when AHCI controller
shares the same interrupt pin with other PCI device, that PCI device's ISR
will be called and nobody de-asserts previous INTx.
This patch clears GHC.IS in ahci_port_stop() even when using MSIx or
MMSI to prevent this case. It ensures GHC.IS is zero before PCI subsystem
enables INTx.

tj: Minor updates to the comment.

Signed-off-by: Raymond Pang <raymond_rule@hotmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
This commit is contained in:
Pang Raymond 2016-07-20 12:13:46 +00:00 committed by Tejun Heo
parent 01c292068e
commit 0516900adf
1 changed files with 8 additions and 0 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

8
drivers/ata/libahci.c
View file

@ -2392,12 +2392,20 @@ static int ahci_port_start(struct ata_port *ap)
static void ahci_port_stop(struct ata_port *ap)
{
const char *emsg = NULL;
struct ahci_host_priv *hpriv = ap->host->private_data;
void __iomem *host_mmio = hpriv->mmio;
int rc;
/* de-initialize port */
rc = ahci_deinit_port(ap, &emsg);
if (rc)
ata_port_warn(ap, "%s (%d)\n", emsg, rc);
/*
* Clear GHC.IS to prevent stuck INTx after disabling MSI and
* re-enabling INTx.
*/
writel(1 << ap->port_no, host_mmio + HOST_IRQ_STAT);
}
void ahci_print_info(struct ata_host *host, const char *scc_s)