iio: accel: Add driver for the mCube MC3230 3-axis accelerometer
Add an IIO driver for the mCube MC3230 3-axis accelerometer. A datasheet for the mCube MC3230 can be found here: http://www.mcubemems.com/wp-content/uploads/2014/10/MC3230_2-Datasheet-APS-048-0007v1.6.pdf Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This commit is contained in:
parent
5620318828
commit
063e3303a9
|
@ -57,6 +57,7 @@ maxim,ds1050 5 Bit Programmable, Pulse-Width Modulator
|
|||
maxim,max1237 Low-Power, 4-/12-Channel, 2-Wire Serial, 12-Bit ADCs
|
||||
maxim,max6625 9-Bit/12-Bit Temperature Sensors with I²C-Compatible Serial Interface
|
||||
mc,rv3029c2 Real Time Clock Module with I2C-Bus
|
||||
mcube,mc3230 mCube 3-axis 8-bit digital accelerometer
|
||||
microchip,mcp4531-502 Microchip 7-bit Single I2C Digital Potentiometer (5k)
|
||||
microchip,mcp4531-103 Microchip 7-bit Single I2C Digital Potentiometer (10k)
|
||||
microchip,mcp4531-503 Microchip 7-bit Single I2C Digital Potentiometer (50k)
|
||||
|
|
|
@ -161,6 +161,16 @@ config KXCJK1013
|
|||
To compile this driver as a module, choose M here: the module will
|
||||
be called kxcjk-1013.
|
||||
|
||||
config MC3230
|
||||
tristate "mCube MC3230 Digital Accelerometer Driver"
|
||||
depends on I2C
|
||||
help
|
||||
Say yes here to build support for the mCube MC3230 low-g tri-axial
|
||||
digital accelerometer.
|
||||
|
||||
To compile this driver as a module, choose M here: the
|
||||
module will be called mc3230.
|
||||
|
||||
config MMA7455
|
||||
tristate
|
||||
select IIO_BUFFER
|
||||
|
|
|
@ -15,6 +15,7 @@ obj-$(CONFIG_KXCJK1013) += kxcjk-1013.o
|
|||
obj-$(CONFIG_KXSD9) += kxsd9.o
|
||||
obj-$(CONFIG_KXSD9_SPI) += kxsd9-spi.o
|
||||
obj-$(CONFIG_KXSD9_I2C) += kxsd9-i2c.o
|
||||
obj-$(CONFIG_MC3230) += mc3230.o
|
||||
|
||||
obj-$(CONFIG_MMA7455) += mma7455_core.o
|
||||
obj-$(CONFIG_MMA7455_I2C) += mma7455_i2c.o
|
||||
|
|
211
drivers/iio/accel/mc3230.c
Normal file
211
drivers/iio/accel/mc3230.c
Normal file
|
@ -0,0 +1,211 @@
|
|||
/**
|
||||
* mCube MC3230 3-Axis Accelerometer
|
||||
*
|
||||
* Copyright (c) 2016 Hans de Goede <hdegoede@redhat.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* IIO driver for mCube MC3230; 7-bit I2C address: 0x4c.
|
||||
*/
|
||||
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/iio/iio.h>
|
||||
#include <linux/iio/sysfs.h>
|
||||
|
||||
#define MC3230_REG_XOUT 0x00
|
||||
#define MC3230_REG_YOUT 0x01
|
||||
#define MC3230_REG_ZOUT 0x02
|
||||
|
||||
#define MC3230_REG_MODE 0x07
|
||||
#define MC3230_MODE_OPCON_MASK 0x03
|
||||
#define MC3230_MODE_OPCON_WAKE 0x01
|
||||
#define MC3230_MODE_OPCON_STANDBY 0x03
|
||||
|
||||
#define MC3230_REG_CHIP_ID 0x18
|
||||
#define MC3230_CHIP_ID 0x01
|
||||
|
||||
#define MC3230_REG_PRODUCT_CODE 0x3b
|
||||
#define MC3230_PRODUCT_CODE 0x19
|
||||
|
||||
/*
|
||||
* The accelerometer has one measurement range:
|
||||
*
|
||||
* -1.5g - +1.5g (8-bit, signed)
|
||||
*
|
||||
* scale = (1.5 + 1.5) * 9.81 / (2^8 - 1) = 0.115411765
|
||||
*/
|
||||
|
||||
static const int mc3230_nscale = 115411765;
|
||||
|
||||
#define MC3230_CHANNEL(reg, axis) { \
|
||||
.type = IIO_ACCEL, \
|
||||
.address = reg, \
|
||||
.modified = 1, \
|
||||
.channel2 = IIO_MOD_##axis, \
|
||||
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
|
||||
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
|
||||
}
|
||||
|
||||
static const struct iio_chan_spec mc3230_channels[] = {
|
||||
MC3230_CHANNEL(MC3230_REG_XOUT, X),
|
||||
MC3230_CHANNEL(MC3230_REG_YOUT, Y),
|
||||
MC3230_CHANNEL(MC3230_REG_ZOUT, Z),
|
||||
};
|
||||
|
||||
struct mc3230_data {
|
||||
struct i2c_client *client;
|
||||
};
|
||||
|
||||
static int mc3230_set_opcon(struct mc3230_data *data, int opcon)
|
||||
{
|
||||
int ret;
|
||||
struct i2c_client *client = data->client;
|
||||
|
||||
ret = i2c_smbus_read_byte_data(client, MC3230_REG_MODE);
|
||||
if (ret < 0) {
|
||||
dev_err(&client->dev, "failed to read mode reg: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
ret &= ~MC3230_MODE_OPCON_MASK;
|
||||
ret |= opcon;
|
||||
|
||||
ret = i2c_smbus_write_byte_data(client, MC3230_REG_MODE, ret);
|
||||
if (ret < 0) {
|
||||
dev_err(&client->dev, "failed to write mode reg: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int mc3230_read_raw(struct iio_dev *indio_dev,
|
||||
struct iio_chan_spec const *chan,
|
||||
int *val, int *val2, long mask)
|
||||
{
|
||||
struct mc3230_data *data = iio_priv(indio_dev);
|
||||
int ret;
|
||||
|
||||
switch (mask) {
|
||||
case IIO_CHAN_INFO_RAW:
|
||||
ret = i2c_smbus_read_byte_data(data->client, chan->address);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
*val = sign_extend32(ret, 7);
|
||||
return IIO_VAL_INT;
|
||||
case IIO_CHAN_INFO_SCALE:
|
||||
*val = 0;
|
||||
*val2 = mc3230_nscale;
|
||||
return IIO_VAL_INT_PLUS_NANO;
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
}
|
||||
|
||||
static const struct iio_info mc3230_info = {
|
||||
.driver_module = THIS_MODULE,
|
||||
.read_raw = mc3230_read_raw,
|
||||
};
|
||||
|
||||
static int mc3230_probe(struct i2c_client *client,
|
||||
const struct i2c_device_id *id)
|
||||
{
|
||||
int ret;
|
||||
struct iio_dev *indio_dev;
|
||||
struct mc3230_data *data;
|
||||
|
||||
/* First check chip-id and product-id */
|
||||
ret = i2c_smbus_read_byte_data(client, MC3230_REG_CHIP_ID);
|
||||
if (ret != MC3230_CHIP_ID)
|
||||
return (ret < 0) ? ret : -ENODEV;
|
||||
|
||||
ret = i2c_smbus_read_byte_data(client, MC3230_REG_PRODUCT_CODE);
|
||||
if (ret != MC3230_PRODUCT_CODE)
|
||||
return (ret < 0) ? ret : -ENODEV;
|
||||
|
||||
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
|
||||
if (!indio_dev) {
|
||||
dev_err(&client->dev, "iio allocation failed!\n");
|
||||
return -ENOMEM;
|
||||
}
|
||||
|
||||
data = iio_priv(indio_dev);
|
||||
data->client = client;
|
||||
i2c_set_clientdata(client, indio_dev);
|
||||
|
||||
indio_dev->dev.parent = &client->dev;
|
||||
indio_dev->info = &mc3230_info;
|
||||
indio_dev->name = "mc3230";
|
||||
indio_dev->modes = INDIO_DIRECT_MODE;
|
||||
indio_dev->channels = mc3230_channels;
|
||||
indio_dev->num_channels = ARRAY_SIZE(mc3230_channels);
|
||||
|
||||
ret = mc3230_set_opcon(data, MC3230_MODE_OPCON_WAKE);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
ret = iio_device_register(indio_dev);
|
||||
if (ret < 0) {
|
||||
dev_err(&client->dev, "device_register failed\n");
|
||||
mc3230_set_opcon(data, MC3230_MODE_OPCON_STANDBY);
|
||||
}
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int mc3230_remove(struct i2c_client *client)
|
||||
{
|
||||
struct iio_dev *indio_dev = i2c_get_clientdata(client);
|
||||
|
||||
iio_device_unregister(indio_dev);
|
||||
|
||||
return mc3230_set_opcon(iio_priv(indio_dev), MC3230_MODE_OPCON_STANDBY);
|
||||
}
|
||||
|
||||
#ifdef CONFIG_PM_SLEEP
|
||||
static int mc3230_suspend(struct device *dev)
|
||||
{
|
||||
struct mc3230_data *data;
|
||||
|
||||
data = iio_priv(i2c_get_clientdata(to_i2c_client(dev)));
|
||||
|
||||
return mc3230_set_opcon(data, MC3230_MODE_OPCON_STANDBY);
|
||||
}
|
||||
|
||||
static int mc3230_resume(struct device *dev)
|
||||
{
|
||||
struct mc3230_data *data;
|
||||
|
||||
data = iio_priv(i2c_get_clientdata(to_i2c_client(dev)));
|
||||
|
||||
return mc3230_set_opcon(data, MC3230_MODE_OPCON_WAKE);
|
||||
}
|
||||
#endif
|
||||
|
||||
static SIMPLE_DEV_PM_OPS(mc3230_pm_ops, mc3230_suspend, mc3230_resume);
|
||||
|
||||
static const struct i2c_device_id mc3230_i2c_id[] = {
|
||||
{"mc3230", 0},
|
||||
{}
|
||||
};
|
||||
MODULE_DEVICE_TABLE(i2c, mc3230_i2c_id);
|
||||
|
||||
static struct i2c_driver mc3230_driver = {
|
||||
.driver = {
|
||||
.name = "mc3230",
|
||||
.pm = &mc3230_pm_ops,
|
||||
},
|
||||
.probe = mc3230_probe,
|
||||
.remove = mc3230_remove,
|
||||
.id_table = mc3230_i2c_id,
|
||||
};
|
||||
|
||||
module_i2c_driver(mc3230_driver);
|
||||
|
||||
MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
|
||||
MODULE_DESCRIPTION("mCube MC3230 3-Axis Accelerometer driver");
|
||||
MODULE_LICENSE("GPL v2");
|
Loading…
Reference in a new issue