Merge branch 'devel-stable' into devel

Documentation/arm/Samsung-S3C24XX/EB2410ITX.txt

@@ -55,4 +55,4 @@ Maintainers
   This board is maintained by Simtec Electronics.
 
 
-(c) 2004 Ben Dooks, Simtec Electronics
+Copyright 2004 Ben Dooks, Simtec Electronics

Documentation/arm/Samsung-S3C24XX/GPIO.txt

@@ -134,4 +134,4 @@ Authour
 
 
 Ben Dooks, 03 October 2004
-(c) 2004 Ben Dooks, Simtec Electronics
+Copyright 2004 Ben Dooks, Simtec Electronics

Documentation/arm/Samsung-S3C24XX/Overview.txt

@@ -299,4 +299,4 @@ Port Contributors
 Document Author
 ---------------
 
-Ben Dooks, (c) 2004-2005,2006 Simtec Electronics
+Ben Dooks, Copyright 2004-2006 Simtec Electronics

Documentation/arm/Samsung-S3C24XX/S3C2412.txt

@@ -117,4 +117,4 @@ ATA
 Document Author
 ---------------
 
-Ben Dooks, (c) 2006 Simtec Electronics
+Ben Dooks, Copyright 2006 Simtec Electronics

Documentation/arm/Samsung-S3C24XX/S3C2413.txt

@@ -18,4 +18,4 @@ Camera Interface
 Document Author
 ---------------
 
-Ben Dooks, (c) 2006 Simtec Electronics
+Ben Dooks, Copyright 2006 Simtec Electronics

Documentation/arm/Samsung-S3C24XX/Suspend.txt

@@ -133,5 +133,5 @@ Configuration
 Document Author
 ---------------
 
-Ben Dooks, (c) 2004 Simtec Electronics
+Ben Dooks, Copyright 2004 Simtec Electronics
 

Documentation/arm/Samsung-S3C24XX/USB-Host.txt

@@ -90,4 +90,4 @@ Platform Data
 Document Author
 ---------------
 
-Ben Dooks, (c) 2005 Simtec Electronics
+Ben Dooks, Copyright 2005 Simtec Electronics

MAINTAINERS

@@ -659,6 +659,9 @@ ARM/FREESCALE IMX / MXC ARM ARCHITECTURE
 M:	Sascha Hauer <kernel@pengutronix.de>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
+T:	git://git.pengutronix.de/git/imx/linux-2.6.git
+F:	arch/arm/mach-mx*/
+F:	arch/arm/plat-mxc/
 
 ARM/GLOMATION GESBC9312SX MACHINE SUPPORT
 M:	Lennert Buytenhek <kernel@wantstofly.org>
@@ -729,6 +732,19 @@ L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/mach-ixp4xx/
 
+ARM/INTEL RESEARCH IMOTE 2 MACHINE SUPPORT
+M:	Jonathan Cameron <jic23@cam.ac.uk>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+F:	arch/arm/mach-pxa/imote2.c
+
+ARM/INTEL RESEARCH STARGATE 2 MACHINE SUPPORT
+M:	Jonathan Cameron <jic23@cam.ac.uk>
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S:	Maintained
+F:	arch/arm/mach-pxa/stargate2.c
+F:	drivers/pcmcia/pxa2xx_stargate2.c
+
 ARM/INTEL XSC3 (MANZANO) ARM CORE
 M:	Lennert Buytenhek <kernel@wantstofly.org>
 M:	Dan Williams <dan.j.williams@intel.com>

arch/arm/Kconfig

@@ -433,6 +433,17 @@ config ARCH_L7200
 	  If you have any questions or comments about the Linux kernel port
 	  to this board, send e-mail to <sjhill@cotw.com>.
 
+config ARCH_DOVE
+	bool "Marvell Dove"
+	select PCI
+	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	select PLAT_ORION
+	help
+	  Support for the Marvell Dove SoC 88AP510
+
 config ARCH_KIRKWOOD
 	bool "Marvell Kirkwood"
 	select CPU_FEROCEON
@@ -757,6 +768,9 @@ source "arch/arm/mach-orion5x/Kconfig"
 
 source "arch/arm/mach-kirkwood/Kconfig"
 
+source "arch/arm/mach-dove/Kconfig"
+
+source "arch/arm/plat-samsung/Kconfig"
 source "arch/arm/plat-s3c24xx/Kconfig"
 source "arch/arm/plat-s3c64xx/Kconfig"
 source "arch/arm/plat-s3c/Kconfig"
@@ -823,6 +837,8 @@ config ARCH_ACORN
 
 config PLAT_IOP
 	bool
+	select GENERIC_CLOCKEVENTS
+	select GENERIC_TIME
 
 config PLAT_ORION
 	bool

arch/arm/Makefile

@@ -122,6 +122,7 @@ machine-$(CONFIG_ARCH_AT91)		:= at91
 machine-$(CONFIG_ARCH_BCMRING)		:= bcmring
 machine-$(CONFIG_ARCH_CLPS711X)		:= clps711x
 machine-$(CONFIG_ARCH_DAVINCI)		:= davinci
+machine-$(CONFIG_ARCH_DOVE)		:= dove
 machine-$(CONFIG_ARCH_EBSA110)		:= ebsa110
 machine-$(CONFIG_ARCH_EP93XX)		:= ep93xx
 machine-$(CONFIG_ARCH_GEMINI)		:= gemini
@@ -180,9 +181,9 @@ plat-$(CONFIG_PLAT_IOP)		:= iop
 plat-$(CONFIG_PLAT_NOMADIK)	:= nomadik
 plat-$(CONFIG_PLAT_ORION)	:= orion
 plat-$(CONFIG_PLAT_PXA)		:= pxa
-plat-$(CONFIG_PLAT_S3C24XX)	:= s3c24xx s3c
+plat-$(CONFIG_PLAT_S3C24XX)	:= s3c24xx s3c samsung
-plat-$(CONFIG_PLAT_S3C64XX)	:= s3c64xx s3c
+plat-$(CONFIG_PLAT_S3C64XX)	:= s3c64xx s3c samsung
-plat-$(CONFIG_PLAT_S5PC1XX)	:= s5pc1xx s3c
+plat-$(CONFIG_PLAT_S5PC1XX)	:= s5pc1xx s3c samsung
 plat-$(CONFIG_ARCH_STMP3XXX)	:= stmp3xxx
 
 ifeq ($(CONFIG_ARCH_EBSA110),y)

arch/arm/boot/compressed/head.S

@@ -743,6 +743,12 @@ proc_types:
 		W(b)	__armv4_mmu_cache_off
 		W(b)	__armv6_mmu_cache_flush
 
+		.word	0x560f5810		@ Marvell PJ4 ARMv6
+		.word	0xff0ffff0
+		W(b)	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_off
+		W(b)	__armv6_mmu_cache_flush
+
 		.word	0x000f0000		@ new CPU Id
 		.word	0x000f0000
 		W(b)	__armv7_mmu_cache_on

arch/arm/configs/cm_x300_defconfig

@@ -1,15 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc8
+# Linux kernel version: 2.6.32-rc4
-# Thu Jun  4 09:53:21 2009
+# Tue Oct 13 19:03:13 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -18,14 +16,14 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+CONFIG_ARCH_HAS_CPUFREQ=y
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_ARCH_MTD_XIP=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -46,11 +44,12 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
+CONFIG_TREE_RCU=y
-# CONFIG_TREE_RCU is not set
+# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=18
@@ -83,7 +82,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -96,6 +94,10 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
 CONFIG_COMPAT_BRK=y
@@ -103,13 +105,17 @@ CONFIG_COMPAT_BRK=y
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_CLK=y
-# CONFIG_SLOW_WORK is not set
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_SLOW_WORK=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -117,11 +123,11 @@ CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -142,19 +148,22 @@ CONFIG_FREEZER=y
 #
 # System Type
 #
+CONFIG_MMU=y
 # CONFIG_ARCH_AAEC2000 is not set
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_NOMADIK is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -163,25 +172,27 @@ CONFIG_FREEZER=y
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
 # CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_LOKI is not set
 # CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
 # CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
 # CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_MSM is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_W90X900 is not set
 
 #
 # Intel PXA2xx/PXA3xx Implementations
@@ -191,16 +202,19 @@ CONFIG_ARCH_PXA=y
 # Supported PXA3xx Processor Variants
 #
 CONFIG_CPU_PXA300=y
-# CONFIG_CPU_PXA310 is not set
+CONFIG_CPU_PXA310=y
 # CONFIG_CPU_PXA320 is not set
 # CONFIG_CPU_PXA930 is not set
 # CONFIG_CPU_PXA935 is not set
+# CONFIG_CPU_PXA950 is not set
 # CONFIG_ARCH_GUMSTIX is not set
 # CONFIG_MACH_INTELMOTE2 is not set
+# CONFIG_MACH_STARGATE2 is not set
 # CONFIG_ARCH_LUBBOCK is not set
 # CONFIG_MACH_LOGICPD_PXA270 is not set
 # CONFIG_MACH_MAINSTONE is not set
 # CONFIG_MACH_MP900C is not set
+# CONFIG_MACH_BALLOON3 is not set
 # CONFIG_ARCH_PXA_IDP is not set
 # CONFIG_PXA_SHARPSL is not set
 # CONFIG_ARCH_VIPER is not set
@@ -218,6 +232,7 @@ CONFIG_CPU_PXA300=y
 # CONFIG_MACH_SAAR is not set
 # CONFIG_MACH_ARMCORE is not set
 CONFIG_MACH_CM_X300=y
+# CONFIG_MACH_H4700 is not set
 # CONFIG_MACH_MAGICIAN is not set
 # CONFIG_MACH_HIMALAYA is not set
 # CONFIG_MACH_MIOA701 is not set
@@ -225,8 +240,8 @@ CONFIG_MACH_CM_X300=y
 # CONFIG_ARCH_PXA_PALM is not set
 # CONFIG_MACH_CSB726 is not set
 # CONFIG_PXA_EZX is not set
+# CONFIG_MACH_XCEP is not set
 CONFIG_PXA3xx=y
-# CONFIG_PXA_PWM is not set
 CONFIG_PLAT_PXA=y
 
 #
@@ -236,7 +251,7 @@ CONFIG_CPU_32=y
 CONFIG_CPU_XSC3=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_PABRT_LEGACY=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_TLB_V4WBI=y
 CONFIG_CPU_CP15=y
@@ -246,11 +261,12 @@ CONFIG_IO_36=y
 #
 # Processor Features
 #
-# CONFIG_ARM_THUMB is not set
+CONFIG_ARM_THUMB=y
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_BPREDICT_DISABLE is not set
 CONFIG_OUTER_CACHE=y
 CONFIG_CACHE_XSC3L2=y
+CONFIG_ARM_L1_CACHE_SHIFT=5
 CONFIG_IWMMXT=y
 CONFIG_COMMON_CLKDEV=y
 
@@ -272,11 +288,12 @@ CONFIG_VMSPLIT_3G=y
 # CONFIG_VMSPLIT_2G is not set
 # CONFIG_VMSPLIT_1G is not set
 CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_HZ=100
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 CONFIG_HIGHMEM=y
@@ -292,17 +309,19 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
 
 #
 # Boot options
 #
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/mtdblock5 rootfstype=jffs2 console=ttyS2,38400"
+CONFIG_CMDLINE="root=/dev/mtdblock5 rootfstype=ubifs console=ttyS2,38400"
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
 
@@ -355,6 +374,7 @@ CONFIG_PM_SLEEP=y
 CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
 CONFIG_APM_EMULATION=y
+# CONFIG_PM_RUNTIME is not set
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
@@ -396,6 +416,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -410,6 +431,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -433,22 +455,27 @@ CONFIG_BT_HIDP=m
 #
 # Bluetooth device drivers
 #
-# CONFIG_BT_HCIBTUSB is not set
+CONFIG_BT_HCIBTUSB=m
 # CONFIG_BT_HCIBTSDIO is not set
 # CONFIG_BT_HCIUART is not set
 # CONFIG_BT_HCIBCM203X is not set
 # CONFIG_BT_HCIBPA10X is not set
 # CONFIG_BT_HCIBFUSB is not set
 # CONFIG_BT_HCIVHCI is not set
+# CONFIG_BT_MRVL is not set
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_LIB80211=m
 # CONFIG_LIB80211_DEBUG is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -461,6 +488,7 @@ CONFIG_LIB80211=m
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -472,9 +500,9 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AFS_PARTS is not set
@@ -521,6 +549,9 @@ CONFIG_MTD_CFI_I2=y
 #
 # Self-contained MTD device drivers
 #
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -556,7 +587,15 @@ CONFIG_MTD_NAND_PXA3xx=y
 #
 # UBI - Unsorted block images
 #
-# CONFIG_MTD_UBI is not set
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
@@ -570,6 +609,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -593,10 +633,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -621,7 +657,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -636,6 +671,7 @@ CONFIG_MII=y
 CONFIG_DM9000=y
 CONFIG_DM9000_DEBUGLEVEL=0
 CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL=y
+# CONFIG_ENC28J60 is not set
 # CONFIG_ETHOC is not set
 # CONFIG_SMC911X is not set
 # CONFIG_SMSC911X is not set
@@ -648,20 +684,20 @@ CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
+CONFIG_WLAN=y
-#
-# Wireless LAN
-#
 # CONFIG_WLAN_PRE80211 is not set
 CONFIG_WLAN_80211=y
 CONFIG_LIBERTAS=m
 # CONFIG_LIBERTAS_USB is not set
 CONFIG_LIBERTAS_SDIO=m
+# CONFIG_LIBERTAS_SPI is not set
 # CONFIG_LIBERTAS_DEBUG is not set
 # CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
 # CONFIG_HOSTAP is not set
 
 #
@@ -683,6 +719,7 @@ CONFIG_LIBERTAS_SDIO=m
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
 # CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
 
 #
 # Input device support
@@ -706,33 +743,51 @@ CONFIG_INPUT_EVDEV=y
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_PXA27x=m
 # CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+CONFIG_KEYBOARD_PXA27x=m
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
 # CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
 # CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_DA9034 is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
 # CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
 # CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
 # CONFIG_TOUCHSCREEN_PENMOUNT is not set
 # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+CONFIG_TOUCHSCREEN_WM97XX=m
+# CONFIG_TOUCHSCREEN_WM9705 is not set
+CONFIG_TOUCHSCREEN_WM9712=y
+# CONFIG_TOUCHSCREEN_WM9713 is not set
+# CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE is not set
 # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
 # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 # CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
 # CONFIG_INPUT_MISC is not set
 
 #
@@ -760,6 +815,7 @@ CONFIG_DEVKMEM=y
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
 CONFIG_SERIAL_CORE=y
@@ -774,6 +830,7 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 # CONFIG_I2C_CHARDEV is not set
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -784,6 +841,7 @@ CONFIG_I2C_HELPER_AUTO=y
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
 CONFIG_I2C_PXA=y
@@ -807,19 +865,36 @@ CONFIG_I2C_PXA=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_GPIO=y
+# CONFIG_SPI_PXA2XX is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
+CONFIG_GPIO_SYSFS=y
 
 #
 # Memory mapped GPIO expanders:
@@ -839,11 +914,17 @@ CONFIG_GPIO_PCA953X=y
 #
 # SPI GPIO expanders:
 #
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -860,32 +941,33 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_ASIC3 is not set
 # CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_UCB1400_CORE is not set
 # CONFIG_TPS65010 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_T7L66XB is not set
 # CONFIG_MFD_TC6387XB is not set
 # CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
+CONFIG_PMIC_DA903X=y
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
-
+# CONFIG_MFD_MC13783 is not set
-#
+# CONFIG_AB3100_CORE is not set
-# Multimedia devices
+# CONFIG_EZX_PCAP is not set
-#
+CONFIG_REGULATOR=y
-
+# CONFIG_REGULATOR_DEBUG is not set
-#
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# Multimedia core support
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-#
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_VIDEO_DEV is not set
+# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_DVB_CORE is not set
+# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_VIDEO_MEDIA is not set
+CONFIG_REGULATOR_DA903X=y
-
+# CONFIG_REGULATOR_LP3971 is not set
-#
+# CONFIG_REGULATOR_TPS65023 is not set
-# Multimedia drivers
+# CONFIG_REGULATOR_TPS6507X is not set
-#
+# CONFIG_MEDIA_SUPPORT is not set
-# CONFIG_DAB is not set
 
 #
 # Graphics support
@@ -925,7 +1007,17 @@ CONFIG_FB_PXA=y
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
 # CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_LMS283GF05 is not set
+# CONFIG_LCD_LTV350QV is not set
+# CONFIG_LCD_ILI9320 is not set
+CONFIG_LCD_TDO24M=y
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=m
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_BACKLIGHT_DA903X=m
 
 #
 # Display device support
@@ -956,38 +1048,48 @@ CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=m
-# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
 CONFIG_SND_JACK=y
 # CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
+CONFIG_SND_OSSEMUL=y
-# CONFIG_SND_PCM_OSS is not set
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
 # CONFIG_SND_DYNAMIC_MINORS is not set
 CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-CONFIG_SND_DRIVERS=y
+CONFIG_SND_VMASTER=y
-# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
-# CONFIG_SND_MPU401 is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_AC97_CODEC=m
+# CONFIG_SND_DRIVERS is not set
 CONFIG_SND_ARM=y
 CONFIG_SND_PXA2XX_LIB=m
+CONFIG_SND_PXA2XX_LIB_AC97=y
 # CONFIG_SND_PXA2XX_AC97 is not set
-CONFIG_SND_USB=y
+# CONFIG_SND_SPI is not set
-# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB is not set
-# CONFIG_SND_USB_CAIAQ is not set
 CONFIG_SND_SOC=m
+CONFIG_SND_SOC_AC97_BUS=y
 CONFIG_SND_PXA2XX_SOC=m
+CONFIG_SND_PXA2XX_SOC_AC97=m
+CONFIG_SND_PXA2XX_SOC_EM_X270=m
 CONFIG_SND_SOC_I2C_AND_SPI=m
 # CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_WM9712=m
 # CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-CONFIG_HID_DEBUG=y
 # CONFIG_HIDRAW is not set
 
 #
@@ -1006,10 +1108,12 @@ CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
+CONFIG_HID_DRAGONRISE=y
 # CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=y
 CONFIG_HID_KYE=y
 CONFIG_HID_GYRATION=y
+CONFIG_HID_TWINHAN=y
 CONFIG_HID_KENSINGTON=y
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
@@ -1023,9 +1127,15 @@ CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
+CONFIG_HID_GREENASIA=y
 # CONFIG_GREENASIA_FF is not set
+CONFIG_HID_SMARTJOYPLUS=y
+# CONFIG_SMARTJOYPLUS_FF is not set
 CONFIG_HID_TOPSEED=y
+CONFIG_HID_THRUSTMASTER=y
 # CONFIG_THRUSTMASTER_FF is not set
+CONFIG_HID_WACOM=m
+CONFIG_HID_ZEROPLUS=y
 # CONFIG_ZEROPLUS_FF is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -1054,6 +1164,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1151,8 +1262,9 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 #
 CONFIG_MMC_PXA=m
 # CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
 # CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 
@@ -1162,8 +1274,10 @@ CONFIG_LEDS_CLASS=y
 # CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP3944 is not set
 # CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DA903X is not set
+# CONFIG_LEDS_DAC124S085 is not set
 # CONFIG_LEDS_BD2802 is not set
 
 #
@@ -1179,6 +1293,7 @@ CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 #
 # iptables trigger is under Netfilter config (LED target)
 #
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1210,10 +1325,19 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
 
 #
 # Platform RTC drivers
@@ -1233,12 +1357,15 @@ CONFIG_RTC_DRV_V3020=y
 #
 # on-CPU RTC drivers
 #
-CONFIG_RTC_DRV_SA1100=y
+# CONFIG_RTC_DRV_SA1100 is not set
-# CONFIG_RTC_DRV_PXA is not set
+CONFIG_RTC_DRV_PXA=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1256,10 +1383,13 @@ CONFIG_JBD=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1319,6 +1449,12 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=y
+# CONFIG_UBIFS_FS_XATTR is not set
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1329,12 +1465,12 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1378,7 +1514,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
 # CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=m
+CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
 # CONFIG_NLS_CODEPAGE_737 is not set
@@ -1428,6 +1564,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1441,6 +1578,7 @@ CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1460,32 +1598,20 @@ CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_TRACING_SUPPORT=y
-
+# CONFIG_FTRACE is not set
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
@@ -1509,7 +1635,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1551,11 +1676,13 @@ CONFIG_CRYPTO_ECB=m
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
@@ -1591,9 +1718,9 @@ CONFIG_CRYPTO_DES=y
 #
 # Compression
 #
-# CONFIG_CRYPTO_DEFLATE is not set
+CONFIG_CRYPTO_DEFLATE=y
 # CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_LZO=y
 
 #
 # Random Number Generation
@@ -1608,7 +1735,7 @@ CONFIG_CRYPTO_DES=y
 CONFIG_BITREVERSE=y
 CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=y
 CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
@@ -1616,6 +1743,8 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
 CONFIG_DECOMPRESS_GZIP=y
 CONFIG_DECOMPRESS_BZIP2=y
 CONFIG_DECOMPRESS_LZMA=y

arch/arm/configs/mx3_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
+# Linux kernel version: 2.6.32-rc5
-# Tue Jul 28 14:11:34 2009
+# Sun Nov  1 22:56:24 2009
 #
 CONFIG_ARM=y
 CONFIG_HAVE_PWM=y
@@ -9,7 +9,6 @@ CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -46,11 +45,12 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
+CONFIG_TREE_RCU=y
-# CONFIG_TREE_RCU is not set
+# CONFIG_TREE_PREEMPT_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -87,16 +87,14 @@ CONFIG_SHMEM=y
 CONFIG_AIO=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
@@ -139,6 +137,7 @@ CONFIG_FREEZER=y
 #
 # System Type
 #
+CONFIG_MMU=y
 # CONFIG_ARCH_AAEC2000 is not set
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_REALVIEW is not set
@@ -153,6 +152,7 @@ CONFIG_ARCH_MXC=y
 # CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -175,18 +175,22 @@ CONFIG_ARCH_MXC=y
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_U300 is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
 
 #
 # Freescale MXC Implementations
 #
 # CONFIG_ARCH_MX1 is not set
 # CONFIG_ARCH_MX2 is not set
+# CONFIG_ARCH_MX25 is not set
 CONFIG_ARCH_MX3=y
+# CONFIG_ARCH_MXC91231 is not set
 CONFIG_ARCH_MX31=y
 CONFIG_ARCH_MX35=y
 
@@ -205,6 +209,7 @@ CONFIG_MACH_QONG=y
 CONFIG_MACH_PCM043=y
 CONFIG_MACH_ARMADILLO5X0=y
 CONFIG_MACH_MX35_3DS=y
+CONFIG_MACH_KZM_ARM11_01=y
 CONFIG_MXC_IRQ_PRIOR=y
 CONFIG_MXC_PWM=y
 CONFIG_ARCH_HAS_RNGA=y
@@ -218,7 +223,7 @@ CONFIG_CPU_V6=y
 # CONFIG_CPU_32v6K is not set
 CONFIG_CPU_32v6=y
 CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_PABRT_V6=y
 CONFIG_CPU_CACHE_V6=y
 CONFIG_CPU_CACHE_VIPT=y
 CONFIG_CPU_COPY_V6=y
@@ -236,6 +241,7 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_BPREDICT_DISABLE is not set
 CONFIG_OUTER_CACHE=y
 CONFIG_CACHE_L2X0=y
+CONFIG_ARM_L1_CACHE_SHIFT=5
 # CONFIG_ARM_ERRATA_411920 is not set
 CONFIG_COMMON_CLKDEV=y
 
@@ -257,6 +263,8 @@ CONFIG_VMSPLIT_3G=y
 # CONFIG_VMSPLIT_2G is not set
 # CONFIG_VMSPLIT_1G is not set
 CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
@@ -277,6 +285,7 @@ CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_ALIGNMENT_TRAP=y
 # CONFIG_UACCESS_WITH_MEMCPY is not set
@@ -326,6 +335,7 @@ CONFIG_PM_SLEEP=y
 CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
 # CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
@@ -367,6 +377,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -407,6 +418,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
@@ -416,9 +428,9 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AFS_PARTS is not set
@@ -587,14 +599,12 @@ CONFIG_DNET=y
 # CONFIG_B44 is not set
 # CONFIG_CS89x0 is not set
 # CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 CONFIG_FEC=y
 # CONFIG_FEC2 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
+CONFIG_WLAN=y
-#
-# Wireless LAN
-#
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -608,6 +618,7 @@ CONFIG_FEC=y
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
 # CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
 
 #
 # Input device support
@@ -630,7 +641,14 @@ CONFIG_DEVKMEM=y
 #
 # Serial drivers
 #
-# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_8250=m
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
 
 #
 # Non-8250 serial port support
@@ -649,6 +667,7 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -681,15 +700,17 @@ CONFIG_I2C_IMX=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_GPIO_SYSFS is not set
@@ -712,6 +733,10 @@ CONFIG_GPIOLIB=y
 #
 # SPI GPIO expanders:
 #
+
+#
+# AC97 GPIO expanders:
+#
 CONFIG_W1=y
 
 #
@@ -734,7 +759,6 @@ CONFIG_W1_SLAVE_THERM=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -759,12 +783,24 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TC6393XB is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 CONFIG_MFD_WM8350=y
 CONFIG_MFD_WM8350_CONFIG_MODE_0=y
 CONFIG_MFD_WM8352_CONFIG_MODE_0=y
 CONFIG_MFD_WM8350_I2C=y
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+CONFIG_REGULATOR_WM8350=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
 CONFIG_MEDIA_SUPPORT=y
 
 #
@@ -874,10 +910,12 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 # MMC/SD/SDIO Host Controller Drivers
 #
 # CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
 CONFIG_MMC_MXC=y
 # CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
 CONFIG_DMADEVICES=y
@@ -896,16 +934,11 @@ CONFIG_DMA_ENGINE=y
 # CONFIG_ASYNC_TX_DMA is not set
 # CONFIG_DMATEST is not set
 # CONFIG_AUXDISPLAY is not set
-CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-CONFIG_REGULATOR_WM8350=y
-# CONFIG_REGULATOR_LP3971 is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -921,6 +954,7 @@ CONFIG_REGULATOR_WM8350=y
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -995,7 +1029,6 @@ CONFIG_UBIFS_FS_ZLIB=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1033,6 +1066,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1062,7 +1096,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1104,11 +1137,13 @@ CONFIG_CRYPTO_CBC=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set

arch/arm/include/asm/hardware/cache-tauros2.h

@@ -0,0 +1,11 @@
+/*
+ * arch/arm/include/asm/hardware/cache-tauros2.h
+ *
+ * Copyright (C) 2008 Marvell Semiconductor
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+extern void __init tauros2_init(void);

arch/arm/include/asm/hardware/iop3xx.h

@@ -234,7 +234,13 @@ extern int iop3xx_get_init_atu(void);
 void iop3xx_map_io(void);
 void iop_init_cp6_handler(void);
 void iop_init_time(unsigned long tickrate);
-unsigned long iop_gettimeoffset(void);
+
+static inline u32 read_tmr0(void)
+{
+	u32 val;
+	asm volatile("mrc p6, 0, %0, c0, c1, 0" : "=r" (val));
+	return val;
+}
 
 static inline void write_tmr0(u32 val)
 {
@@ -253,6 +259,11 @@ static inline u32 read_tcr0(void)
 	return val;
 }
 
+static inline void write_tcr0(u32 val)
+{
+	asm volatile("mcr p6, 0, %0, c2, c1, 0" : : "r" (val));
+}
+
 static inline u32 read_tcr1(void)
 {
 	u32 val;
@@ -260,6 +271,11 @@ static inline u32 read_tcr1(void)
 	return val;
 }
 
+static inline void write_tcr1(u32 val)
+{
+	asm volatile("mcr p6, 0, %0, c3, c1, 0" : : "r" (val));
+}
+
 static inline void write_trr0(u32 val)
 {
 	asm volatile("mcr p6, 0, %0, c4, c1, 0" : : "r" (val));

arch/arm/kernel/head-nommu.S

@@ -32,7 +32,7 @@
  * numbers for r1.
  *
  */
-	.section ".text.head", "ax"
+	__HEAD
 ENTRY(stext)
 	setmode	PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 @ ensure svc mode
 						@ and irqs disabled

arch/arm/kernel/head.S

@@ -74,7 +74,7 @@
  * crap here - that's what the boot loader (or in extreme, well justified
  * circumstances, zImage) is for.
  */
-	.section ".text.head", "ax"
+	__HEAD
 ENTRY(stext)
 	setmode	PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 @ ensure svc mode
 						@ and irqs disabled

arch/arm/kernel/vmlinux.lds.S

@@ -24,13 +24,11 @@ SECTIONS
 #else
 	. = PAGE_OFFSET + TEXT_OFFSET;
 #endif
-	.text.head : {
-		_stext = .;
-		_sinittext = .;
-		*(.text.head)
-	}
 
 	.init : {			/* Init code and data		*/
+		_stext = .;
+		_sinittext = .;
+			HEAD_TEXT
 			INIT_TEXT
 		_einittext = .;
 		__proc_info_begin = .;
@@ -42,43 +40,31 @@ SECTIONS
 		__tagtable_begin = .;
 			*(.taglist.init)
 		__tagtable_end = .;
-		. = ALIGN(16);
+
-		__setup_start = .;
+		INIT_SETUP(16)
-			*(.init.setup)
+
-		__setup_end = .;
 		__early_begin = .;
 			*(.early_param.init)
 		__early_end = .;
-		__initcall_start = .;
+
-			INITCALLS
+		INIT_CALLS
-		__initcall_end = .;
+		CON_INITCALL
-		__con_initcall_start = .;
+		SECURITY_INITCALL
-			*(.con_initcall.init)
+		INIT_RAM_FS
-		__con_initcall_end = .;
+
-		__security_initcall_start = .;
-			*(.security_initcall.init)
-		__security_initcall_end = .;
-#ifdef CONFIG_BLK_DEV_INITRD
-		. = ALIGN(32);
-		__initramfs_start = .;
-			usr/built-in.o(.init.ramfs)
-		__initramfs_end = .;
-#endif
-		. = ALIGN(PAGE_SIZE);
-		__per_cpu_load = .;
-		__per_cpu_start = .;
-			*(.data.percpu.page_aligned)
-			*(.data.percpu)
-			*(.data.percpu.shared_aligned)
-		__per_cpu_end = .;
 #ifndef CONFIG_XIP_KERNEL
 		__init_begin = _stext;
 		INIT_DATA
-		. = ALIGN(PAGE_SIZE);
-		__init_end = .;
 #endif
 	}
 
+	PERCPU(PAGE_SIZE)
+
+#ifndef CONFIG_XIP_KERNEL
+	. = ALIGN(PAGE_SIZE);
+	__init_end = .;
+#endif
+
 	/DISCARD/ : {			/* Exit code and data		*/
 		EXIT_TEXT
 		EXIT_DATA
@@ -157,7 +143,7 @@ SECTIONS
 		 * first, the init task union, aligned
 		 * to an 8192 byte boundary.
 		 */
-		*(.data.init_task)
+		INIT_TASK_DATA(THREAD_SIZE)
 
 #ifdef CONFIG_XIP_KERNEL
 		. = ALIGN(PAGE_SIZE);
@@ -167,17 +153,8 @@ SECTIONS
 		__init_end = .;
 #endif
 
-		. = ALIGN(PAGE_SIZE);
+		NOSAVE_DATA
-		__nosave_begin = .;
+		CACHELINE_ALIGNED_DATA(32)
-		*(.data.nosave)
-		. = ALIGN(PAGE_SIZE);
-		__nosave_end = .;
-
-		/*
-		 * then the cacheline aligned data
-		 */
-		. = ALIGN(32);
-		*(.data.cacheline_aligned)
 
 		/*
 		 * The exception fixup table (might need resorting at runtime)
@@ -256,20 +233,10 @@ SECTIONS
 	}
 #endif
 
-	.bss : {
+	BSS_SECTION(0, 0, 0)
-		__bss_start = .;	/* BSS				*/
+	_end = .;
-		*(.bss)
+
-		*(COMMON)
+	STABS_DEBUG
-		__bss_stop = .;
-		_end = .;
-	}
-					/* Stabs debugging sections.	*/
-	.stab 0 : { *(.stab) }
-	.stabstr 0 : { *(.stabstr) }
-	.stab.excl 0 : { *(.stab.excl) }
-	.stab.exclstr 0 : { *(.stab.exclstr) }
-	.stab.index 0 : { *(.stab.index) }
-	.stab.indexstr 0 : { *(.stab.indexstr) }
 	.comment 0 : { *(.comment) }
 }
 

arch/arm/mach-at91/Kconfig

@@ -1,5 +1,20 @@
 if ARCH_AT91
 
+config HAVE_AT91_DATAFLASH_CARD
+	bool
+
+config HAVE_NAND_ATMEL_BUSWIDTH_16
+	bool
+
+config HAVE_AT91_USART3
+	bool
+
+config HAVE_AT91_USART4
+	bool
+
+config HAVE_AT91_USART5
+	bool
+
 menu "Atmel AT91 System-on-Chip"
 
 choice
@@ -10,54 +25,69 @@ config ARCH_AT91RM9200
 	select CPU_ARM920T
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select HAVE_AT91_USART3
 
 config ARCH_AT91SAM9260
 	bool "AT91SAM9260 or AT91SAM9XE"
 	select CPU_ARM926T
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select HAVE_AT91_USART3
+	select HAVE_AT91_USART4
+	select HAVE_AT91_USART5
 
 config ARCH_AT91SAM9261
 	bool "AT91SAM9261"
 	select CPU_ARM926T
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select HAVE_FB_ATMEL
 
 config ARCH_AT91SAM9G10
 	bool "AT91SAM9G10"
 	select CPU_ARM926T
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select HAVE_FB_ATMEL
 
 config ARCH_AT91SAM9263
 	bool "AT91SAM9263"
 	select CPU_ARM926T
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select HAVE_FB_ATMEL
 
 config ARCH_AT91SAM9RL
 	bool "AT91SAM9RL"
 	select CPU_ARM926T
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select HAVE_AT91_USART3
+	select HAVE_FB_ATMEL
 
 config ARCH_AT91SAM9G20
 	bool "AT91SAM9G20"
 	select CPU_ARM926T
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select HAVE_AT91_USART3
+	select HAVE_AT91_USART4
+	select HAVE_AT91_USART5
 
 config ARCH_AT91SAM9G45
 	bool "AT91SAM9G45"
 	select CPU_ARM926T
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select HAVE_AT91_USART3
+	select HAVE_FB_ATMEL
 
 config ARCH_AT91CAP9
 	bool "AT91CAP9"
 	select CPU_ARM926T
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select HAVE_FB_ATMEL
 
 config ARCH_AT91X40
 	bool "AT91x40"
@@ -76,89 +106,79 @@ comment "AT91RM9200 Board Type"
 
 config MACH_ONEARM
 	bool "Ajeco 1ARM Single Board Computer"
-	depends on ARCH_AT91RM9200
 	help
 	  Select this if you are using Ajeco's 1ARM Single Board Computer.
 	  <http://www.ajeco.fi/products.htm>
 
 config ARCH_AT91RM9200DK
 	bool "Atmel AT91RM9200-DK Development board"
-	depends on ARCH_AT91RM9200
+	select HAVE_AT91_DATAFLASH_CARD
 	help
 	  Select this if you are using Atmel's AT91RM9200-DK Development board.
 	  (Discontinued)
 
 config MACH_AT91RM9200EK
 	bool "Atmel AT91RM9200-EK Evaluation Kit"
-	depends on ARCH_AT91RM9200
+	select HAVE_AT91_DATAFLASH_CARD
 	help
 	  Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit.
 	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507>
 
 config MACH_CSB337
 	bool "Cogent CSB337"
-	depends on ARCH_AT91RM9200
 	help
 	  Select this if you are using Cogent's CSB337 board.
 	  <http://www.cogcomp.com/csb_csb337.htm>
 
 config MACH_CSB637
 	bool "Cogent CSB637"
-	depends on ARCH_AT91RM9200
 	help
 	  Select this if you are using Cogent's CSB637 board.
 	  <http://www.cogcomp.com/csb_csb637.htm>
 
 config MACH_CARMEVA
 	bool "Conitec ARM&EVA"
-	depends on ARCH_AT91RM9200
 	help
 	  Select this if you are using Conitec's AT91RM9200-MCU-Module.
 	  <http://www.conitec.net/english/linuxboard.htm>
 
 config MACH_ATEB9200
 	bool "Embest ATEB9200"
-	depends on ARCH_AT91RM9200
 	help
 	  Select this if you are using Embest's ATEB9200 board.
 	  <http://www.embedinfo.com/english/product/ATEB9200.asp>
 
 config MACH_KB9200
 	bool "KwikByte KB920x"
-	depends on ARCH_AT91RM9200
 	help
 	  Select this if you are using KwikByte's KB920x board.
 	  <http://kwikbyte.com/KB9202_description_new.htm>
 
 config MACH_PICOTUX2XX
 	bool "picotux 200"
-	depends on ARCH_AT91RM9200
 	help
 	  Select this if you are using a picotux 200.
 	  <http://www.picotux.com/>
 
 config MACH_KAFA
 	bool "Sperry-Sun KAFA board"
-	depends on ARCH_AT91RM9200
 	help
 	  Select this if you are using Sperry-Sun's KAFA board.
 
 config MACH_ECBAT91
 	bool "emQbit ECB_AT91 SBC"
-	depends on ARCH_AT91RM9200
+	select HAVE_AT91_DATAFLASH_CARD
 	help
 	  Select this if you are using emQbit's ECB_AT91 board.
 	  <http://wiki.emqbit.com/free-ecb-at91>
 
 config MACH_YL9200
 	bool "ucDragon YL-9200"
-	depends on ARCH_AT91RM9200
 	help
 	  Select this if you are using the ucDragon YL-9200 board.
 
 config MACH_CPUAT91
 	bool "Eukrea CPUAT91"
-	depends on ARCH_AT91RM9200
 	help
 	  Select this if you are using the Eukrea Electromatique's
 	  CPUAT91 board <http://www.eukrea.com/>.
@@ -178,7 +198,6 @@ comment "AT91SAM9260 Variants"
 
 config ARCH_AT91SAM9260_SAM9XE
 	bool "AT91SAM9XE"
-	depends on ARCH_AT91SAM9260
 	help
 	  Select this if you are using Atmel's AT91SAM9XE System-on-Chip.
 	  They are basically AT91SAM9260s with various sizes of embedded Flash.
@@ -187,28 +206,27 @@ comment "AT91SAM9260 / AT91SAM9XE Board Type"
 
 config MACH_AT91SAM9260EK
 	bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit"
-	depends on ARCH_AT91SAM9260
+	select HAVE_AT91_DATAFLASH_CARD
+	select HAVE_NAND_ATMEL_BUSWIDTH_16
 	help
 	  Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
 	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
 
 config MACH_CAM60
 	bool "KwikByte KB9260 (CAM60) board"
-	depends on ARCH_AT91SAM9260
 	help
 	  Select this if you are using KwikByte's KB9260 (CAM60) board based on the Atmel AT91SAM9260.
 	  <http://www.kwikbyte.com/KB9260.html>
 
 config MACH_SAM9_L9260
 	bool "Olimex SAM9-L9260 board"
-	depends on ARCH_AT91SAM9260
+	select HAVE_AT91_DATAFLASH_CARD
 	help
 	  Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260.
 	  <http://www.olimex.com/dev/sam9-L9260.html>
 
 config MACH_AFEB9260
 	bool "Custom afeb9260 board v1"
-	depends on ARCH_AT91SAM9260
 	help
 	  Select this if you are using custom afeb9260 board based on
 	  open hardware design. Select this for revision 1 of the board.
@@ -217,21 +235,18 @@ config MACH_AFEB9260
 
 config MACH_USB_A9260
 	bool "CALAO USB-A9260"
-	depends on ARCH_AT91SAM9260
 	help
 	  Select this if you are using a Calao Systems USB-A9260.
 	  <http://www.calao-systems.com>
 
 config MACH_QIL_A9260
 	bool "CALAO QIL-A9260 board"
-	depends on ARCH_AT91SAM9260
 	help
 	  Select this if you are using a Calao Systems QIL-A9260 Board.
 	  <http://www.calao-systems.com>
 
 config MACH_CPU9260
 	bool "Eukrea CPU9260 board"
-	depends on ARCH_AT91SAM9260
 	help
 	  Select this if you are using a Eukrea Electromatique's
 	  CPU9260 Board <http://www.eukrea.com/>
@@ -246,7 +261,8 @@ comment "AT91SAM9261 Board Type"
 
 config MACH_AT91SAM9261EK
 	bool "Atmel AT91SAM9261-EK Evaluation Kit"
-	depends on ARCH_AT91SAM9261
+	select HAVE_AT91_DATAFLASH_CARD
+	select HAVE_NAND_ATMEL_BUSWIDTH_16
 	help
 	  Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
 	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
@@ -261,7 +277,8 @@ comment "AT91SAM9G10 Board Type"
 
 config MACH_AT91SAM9G10EK
 	bool "Atmel AT91SAM9G10-EK Evaluation Kit"
-	depends on ARCH_AT91SAM9G10
+	select HAVE_AT91_DATAFLASH_CARD
+	select HAVE_NAND_ATMEL_BUSWIDTH_16
 	help
 	  Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit.
 	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588>
@@ -276,21 +293,21 @@ comment "AT91SAM9263 Board Type"
 
 config MACH_AT91SAM9263EK
 	bool "Atmel AT91SAM9263-EK Evaluation Kit"
-	depends on ARCH_AT91SAM9263
+	select HAVE_AT91_DATAFLASH_CARD
+	select HAVE_NAND_ATMEL_BUSWIDTH_16
 	help
 	  Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
 	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
 
 config MACH_USB_A9263
 	bool "CALAO USB-A9263"
-	depends on ARCH_AT91SAM9263
 	help
 	  Select this if you are using a Calao Systems USB-A9263.
 	  <http://www.calao-systems.com>
 
 config MACH_NEOCORE926
 	bool "Adeneo NEOCORE926"
-	depends on ARCH_AT91SAM9263
+	select HAVE_AT91_DATAFLASH_CARD
 	help
 	  Select this if you are using the Adeneo Neocore 926 board.
 
@@ -304,7 +321,6 @@ comment "AT91SAM9RL Board Type"
 
 config MACH_AT91SAM9RLEK
 	bool "Atmel AT91SAM9RL-EK Evaluation Kit"
-	depends on ARCH_AT91SAM9RL
 	help
 	  Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit.
 
@@ -318,14 +334,15 @@ comment "AT91SAM9G20 Board Type"
 
 config MACH_AT91SAM9G20EK
 	bool "Atmel AT91SAM9G20-EK Evaluation Kit"
-	depends on ARCH_AT91SAM9G20
+	select HAVE_AT91_DATAFLASH_CARD
+	select HAVE_NAND_ATMEL_BUSWIDTH_16
 	help
 	  Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit
 	  that embeds only one SD/MMC slot.
 
 config MACH_AT91SAM9G20EK_2MMC
 	bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots"
-	depends on ARCH_AT91SAM9G20
+	select HAVE_NAND_ATMEL_BUSWIDTH_16
 	help
 	  Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
 	  with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and
@@ -333,7 +350,6 @@ config MACH_AT91SAM9G20EK_2MMC
 
 config MACH_CPU9G20
 	bool "Eukrea CPU9G20 board"
-	depends on ARCH_AT91SAM9G20
 	help
 	  Select this if you are using a Eukrea Electromatique's
 	  CPU9G20 Board <http://www.eukrea.com/>
@@ -348,7 +364,7 @@ comment "AT91SAM9G45 Board Type"
 
 config MACH_AT91SAM9G45EKES
 	bool "Atmel AT91SAM9G45-EKES Evaluation Kit"
-	depends on ARCH_AT91SAM9G45
+	select HAVE_NAND_ATMEL_BUSWIDTH_16
 	help
 	  Select this if you are using Atmel's AT91SAM9G45-EKES Evaluation Kit.
 	  "ES" at the end of the name means that this board is an
@@ -364,7 +380,8 @@ comment "AT91CAP9 Board Type"
 
 config MACH_AT91CAP9ADK
 	bool "Atmel AT91CAP9A-DK Evaluation Kit"
-	depends on ARCH_AT91CAP9
+	select HAVE_AT91_DATAFLASH_CARD
+	select HAVE_NAND_ATMEL_BUSWIDTH_16
 	help
 	  Select this if you are using Atmel's AT91CAP9A-DK Evaluation Kit.
 	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4138>
@@ -393,13 +410,13 @@ comment "AT91 Board Options"
 
 config MTD_AT91_DATAFLASH_CARD
 	bool "Enable DataFlash Card support"
-	depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_ECBAT91 || MACH_SAM9_L9260 || MACH_AT91CAP9ADK || MACH_NEOCORE926)
+	depends on HAVE_AT91_DATAFLASH_CARD
 	help
 	  Enable support for the DataFlash card.
 
 config MTD_NAND_ATMEL_BUSWIDTH_16
 	bool "Enable 16-bit data bus interface to NAND flash"
-	depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91SAM9G20EK_2MMC || MACH_AT91SAM9G45EKES || MACH_AT91CAP9ADK)
+	depends on HAVE_NAND_ATMEL_BUSWIDTH_16
 	help
 	  On AT91SAM926x boards both types of NAND flash can be present
 	  (8 and 16 bit data bus width).
@@ -461,15 +478,15 @@ config AT91_EARLY_USART2
 
 config AT91_EARLY_USART3
 	bool "USART3"
-	depends on (ARCH_AT91RM9200 || ARCH_AT91SAM9RL || ARCH_AT91SAM9260 || ARCH_AT91SAM9G20 || ARCH_AT91SAM9G45)
+	depends on HAVE_AT91_USART3
 
 config AT91_EARLY_USART4
 	bool "USART4"
-	depends on ARCH_AT91SAM9260 || ARCH_AT91SAM9G20
+	depends on HAVE_AT91_USART4
 
 config AT91_EARLY_USART5
 	bool "USART5"
-	depends on ARCH_AT91SAM9260 || ARCH_AT91SAM9G20
+	depends on HAVE_AT91_USART5
 
 endchoice
 

arch/arm/mach-dove/Kconfig

@@ -0,0 +1,14 @@
+if ARCH_DOVE
+
+menu "Marvell Dove Implementations"
+
+config MACH_DOVE_DB
+	bool "Marvell DB-MV88AP510 Development Board"
+	select I2C_BOARDINFO
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell DB-MV88AP510 Development Board.
+
+endmenu
+
+endif

arch/arm/mach-dove/Makefile

@@ -0,0 +1,3 @@
+obj-y				+= common.o addr-map.o irq.o pcie.o
+
+obj-$(CONFIG_MACH_DOVE_DB)	+= dove-db-setup.o

arch/arm/mach-dove/Makefile.boot

@@ -0,0 +1,3 @@
+   zreladdr-y	:= 0x00008000
+params_phys-y	:= 0x00000100
+initrd_phys-y	:= 0x00800000

arch/arm/mach-dove/addr-map.c

@@ -0,0 +1,149 @@
+/*
+ * arch/arm/mach-dove/addr-map.c
+ *
+ * Address map functions for Marvell Dove 88AP510 SoC
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mbus.h>
+#include <linux/io.h>
+#include <asm/mach/arch.h>
+#include <asm/setup.h>
+#include "common.h"
+
+/*
+ * Generic Address Decode Windows bit settings
+ */
+#define TARGET_DDR		0x0
+#define TARGET_BOOTROM		0x1
+#define TARGET_CESA		0x3
+#define TARGET_PCIE0		0x4
+#define TARGET_PCIE1		0x8
+#define TARGET_SCRATCHPAD	0xd
+
+#define ATTR_CESA		0x01
+#define ATTR_BOOTROM		0xfd
+#define ATTR_DEV_SPI0_ROM	0xfe
+#define ATTR_DEV_SPI1_ROM	0xfb
+#define ATTR_PCIE_IO		0xe0
+#define ATTR_PCIE_MEM		0xe8
+#define ATTR_SCRATCHPAD		0x0
+
+/*
+ * CPU Address Decode Windows registers
+ */
+#define WIN_CTRL(n)	(BRIDGE_VIRT_BASE + ((n) << 4) + 0x0)
+#define WIN_BASE(n)	(BRIDGE_VIRT_BASE + ((n) << 4) + 0x4)
+#define WIN_REMAP_LO(n)	(BRIDGE_VIRT_BASE + ((n) << 4) + 0x8)
+#define WIN_REMAP_HI(n)	(BRIDGE_VIRT_BASE + ((n) << 4) + 0xc)
+
+struct mbus_dram_target_info dove_mbus_dram_info;
+
+static inline void __iomem *ddr_map_sc(int i)
+{
+	return (void __iomem *)(DOVE_MC_VIRT_BASE + 0x100 + ((i) << 4));
+}
+
+static int cpu_win_can_remap(int win)
+{
+	if (win < 4)
+		return 1;
+
+	return 0;
+}
+
+static void __init setup_cpu_win(int win, u32 base, u32 size,
+				 u8 target, u8 attr, int remap)
+{
+	u32 ctrl;
+
+	base &= 0xffff0000;
+	ctrl = ((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1;
+
+	writel(base, WIN_BASE(win));
+	writel(ctrl, WIN_CTRL(win));
+	if (cpu_win_can_remap(win)) {
+		if (remap < 0)
+			remap = base;
+		writel(remap & 0xffff0000, WIN_REMAP_LO(win));
+		writel(0, WIN_REMAP_HI(win));
+	}
+}
+
+void __init dove_setup_cpu_mbus(void)
+{
+	int i;
+	int cs;
+
+	/*
+	 * First, disable and clear windows.
+	 */
+	for (i = 0; i < 8; i++) {
+		writel(0, WIN_BASE(i));
+		writel(0, WIN_CTRL(i));
+		if (cpu_win_can_remap(i)) {
+			writel(0, WIN_REMAP_LO(i));
+			writel(0, WIN_REMAP_HI(i));
+		}
+	}
+
+	/*
+	 * Setup windows for PCIe IO+MEM space.
+	 */
+	setup_cpu_win(0, DOVE_PCIE0_IO_PHYS_BASE, DOVE_PCIE0_IO_SIZE,
+		      TARGET_PCIE0, ATTR_PCIE_IO, DOVE_PCIE0_IO_BUS_BASE);
+	setup_cpu_win(1, DOVE_PCIE1_IO_PHYS_BASE, DOVE_PCIE1_IO_SIZE,
+		      TARGET_PCIE1, ATTR_PCIE_IO, DOVE_PCIE1_IO_BUS_BASE);
+	setup_cpu_win(2, DOVE_PCIE0_MEM_PHYS_BASE, DOVE_PCIE0_MEM_SIZE,
+		      TARGET_PCIE0, ATTR_PCIE_MEM, -1);
+	setup_cpu_win(3, DOVE_PCIE1_MEM_PHYS_BASE, DOVE_PCIE1_MEM_SIZE,
+		      TARGET_PCIE1, ATTR_PCIE_MEM, -1);
+
+	/*
+	 * Setup window for CESA engine.
+	 */
+	setup_cpu_win(4, DOVE_CESA_PHYS_BASE, DOVE_CESA_SIZE,
+		      TARGET_CESA, ATTR_CESA, -1);
+
+	/*
+	 * Setup the Window to the BootROM for Standby and Sleep Resume
+	 */
+	setup_cpu_win(5, DOVE_BOOTROM_PHYS_BASE, DOVE_BOOTROM_SIZE,
+		      TARGET_BOOTROM, ATTR_BOOTROM, -1);
+
+	/*
+	 * Setup the Window to the PMU Scratch Pad space
+	 */
+	setup_cpu_win(6, DOVE_SCRATCHPAD_PHYS_BASE, DOVE_SCRATCHPAD_SIZE,
+		      TARGET_SCRATCHPAD, ATTR_SCRATCHPAD, -1);
+
+	/*
+	 * Setup MBUS dram target info.
+	 */
+	dove_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
+
+	for (i = 0, cs = 0; i < 2; i++) {
+		u32 map = readl(ddr_map_sc(i));
+
+		/*
+		 * Chip select enabled?
+		 */
+		if (map & 1) {
+			struct mbus_dram_window *w;
+
+			w = &dove_mbus_dram_info.cs[cs++];
+			w->cs_index = i;
+			w->mbus_attr = 0; /* CS address decoding done inside */
+					  /* the DDR controller, no need to  */
+					  /* provide attributes */
+			w->base = map & 0xff800000;
+			w->size = 0x100000 << (((map & 0x000f0000) >> 16) - 4);
+		}
+	}
+	dove_mbus_dram_info.num_cs = cs;
+}

arch/arm/mach-dove/common.c

@@ -0,0 +1,781 @@
+/*
+ * arch/arm/mach-dove/common.c
+ *
+ * Core functions for Marvell Dove 88AP510 System On Chip
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/serial_8250.h>
+#include <linux/clk.h>
+#include <linux/mbus.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/mv643xx_i2c.h>
+#include <linux/ata_platform.h>
+#include <linux/spi/orion_spi.h>
+#include <linux/gpio.h>
+#include <asm/page.h>
+#include <asm/setup.h>
+#include <asm/timex.h>
+#include <asm/hardware/cache-tauros2.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <asm/mach/pci.h>
+#include <mach/dove.h>
+#include <mach/bridge-regs.h>
+#include <asm/mach/arch.h>
+#include <linux/irq.h>
+#include <plat/mv_xor.h>
+#include <plat/ehci-orion.h>
+#include <plat/time.h>
+#include "common.h"
+
+/*****************************************************************************
+ * I/O Address Mapping
+ ****************************************************************************/
+static struct map_desc dove_io_desc[] __initdata = {
+	{
+		.virtual	= DOVE_SB_REGS_VIRT_BASE,
+		.pfn		= __phys_to_pfn(DOVE_SB_REGS_PHYS_BASE),
+		.length		= DOVE_SB_REGS_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= DOVE_NB_REGS_VIRT_BASE,
+		.pfn		= __phys_to_pfn(DOVE_NB_REGS_PHYS_BASE),
+		.length		= DOVE_NB_REGS_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= DOVE_PCIE0_IO_VIRT_BASE,
+		.pfn		= __phys_to_pfn(DOVE_PCIE0_IO_PHYS_BASE),
+		.length		= DOVE_PCIE0_IO_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= DOVE_PCIE1_IO_VIRT_BASE,
+		.pfn		= __phys_to_pfn(DOVE_PCIE1_IO_PHYS_BASE),
+		.length		= DOVE_PCIE1_IO_SIZE,
+		.type		= MT_DEVICE,
+	},
+};
+
+void __init dove_map_io(void)
+{
+	iotable_init(dove_io_desc, ARRAY_SIZE(dove_io_desc));
+}
+
+/*****************************************************************************
+ * EHCI
+ ****************************************************************************/
+static struct orion_ehci_data dove_ehci_data = {
+	.dram		= &dove_mbus_dram_info,
+	.phy_version	= EHCI_PHY_NA,
+};
+
+static u64 ehci_dmamask = DMA_BIT_MASK(32);
+
+/*****************************************************************************
+ * EHCI0
+ ****************************************************************************/
+static struct resource dove_ehci0_resources[] = {
+	{
+		.start	= DOVE_USB0_PHYS_BASE,
+		.end	= DOVE_USB0_PHYS_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_DOVE_USB0,
+		.end	= IRQ_DOVE_USB0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dove_ehci0 = {
+	.name		= "orion-ehci",
+	.id		= 0,
+	.dev		= {
+		.dma_mask		= &ehci_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= &dove_ehci_data,
+	},
+	.resource	= dove_ehci0_resources,
+	.num_resources	= ARRAY_SIZE(dove_ehci0_resources),
+};
+
+void __init dove_ehci0_init(void)
+{
+	platform_device_register(&dove_ehci0);
+}
+
+/*****************************************************************************
+ * EHCI1
+ ****************************************************************************/
+static struct resource dove_ehci1_resources[] = {
+	{
+		.start	= DOVE_USB1_PHYS_BASE,
+		.end	= DOVE_USB1_PHYS_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_DOVE_USB1,
+		.end	= IRQ_DOVE_USB1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dove_ehci1 = {
+	.name		= "orion-ehci",
+	.id		= 1,
+	.dev		= {
+		.dma_mask		= &ehci_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= &dove_ehci_data,
+	},
+	.resource	= dove_ehci1_resources,
+	.num_resources	= ARRAY_SIZE(dove_ehci1_resources),
+};
+
+void __init dove_ehci1_init(void)
+{
+	platform_device_register(&dove_ehci1);
+}
+
+/*****************************************************************************
+ * GE00
+ ****************************************************************************/
+struct mv643xx_eth_shared_platform_data dove_ge00_shared_data = {
+	.t_clk		= 0,
+	.dram		= &dove_mbus_dram_info,
+};
+
+static struct resource dove_ge00_shared_resources[] = {
+	{
+		.name	= "ge00 base",
+		.start	= DOVE_GE00_PHYS_BASE + 0x2000,
+		.end	= DOVE_GE00_PHYS_BASE + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device dove_ge00_shared = {
+	.name		= MV643XX_ETH_SHARED_NAME,
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &dove_ge00_shared_data,
+	},
+	.num_resources	= 1,
+	.resource	= dove_ge00_shared_resources,
+};
+
+static struct resource dove_ge00_resources[] = {
+	{
+		.name	= "ge00 irq",
+		.start	= IRQ_DOVE_GE00_SUM,
+		.end	= IRQ_DOVE_GE00_SUM,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dove_ge00 = {
+	.name		= MV643XX_ETH_NAME,
+	.id		= 0,
+	.num_resources	= 1,
+	.resource	= dove_ge00_resources,
+	.dev		= {
+		.coherent_dma_mask	= 0xffffffff,
+	},
+};
+
+void __init dove_ge00_init(struct mv643xx_eth_platform_data *eth_data)
+{
+	eth_data->shared = &dove_ge00_shared;
+	dove_ge00.dev.platform_data = eth_data;
+
+	platform_device_register(&dove_ge00_shared);
+	platform_device_register(&dove_ge00);
+}
+
+/*****************************************************************************
+ * SoC RTC
+ ****************************************************************************/
+static struct resource dove_rtc_resource[] = {
+	{
+		.start	= DOVE_RTC_PHYS_BASE,
+		.end	= DOVE_RTC_PHYS_BASE + 32 - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_DOVE_RTC,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+void __init dove_rtc_init(void)
+{
+	platform_device_register_simple("rtc-mv", -1, dove_rtc_resource, 2);
+}
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+static struct resource dove_sata_resources[] = {
+	{
+		.name	= "sata base",
+		.start	= DOVE_SATA_PHYS_BASE,
+		.end	= DOVE_SATA_PHYS_BASE + 0x5000 - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.name	= "sata irq",
+		.start	= IRQ_DOVE_SATA,
+		.end	= IRQ_DOVE_SATA,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dove_sata = {
+	.name		= "sata_mv",
+	.id		= 0,
+	.dev		= {
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.num_resources	= ARRAY_SIZE(dove_sata_resources),
+	.resource	= dove_sata_resources,
+};
+
+void __init dove_sata_init(struct mv_sata_platform_data *sata_data)
+{
+	sata_data->dram = &dove_mbus_dram_info;
+	dove_sata.dev.platform_data = sata_data;
+	platform_device_register(&dove_sata);
+}
+
+/*****************************************************************************
+ * UART0
+ ****************************************************************************/
+static struct plat_serial8250_port dove_uart0_data[] = {
+	{
+		.mapbase	= DOVE_UART0_PHYS_BASE,
+		.membase	= (char *)DOVE_UART0_VIRT_BASE,
+		.irq		= IRQ_DOVE_UART_0,
+		.flags		= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= 0,
+	}, {
+	},
+};
+
+static struct resource dove_uart0_resources[] = {
+	{
+		.start		= DOVE_UART0_PHYS_BASE,
+		.end		= DOVE_UART0_PHYS_BASE + SZ_256 - 1,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= IRQ_DOVE_UART_0,
+		.end		= IRQ_DOVE_UART_0,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dove_uart0 = {
+	.name			= "serial8250",
+	.id			= 0,
+	.dev			= {
+		.platform_data	= dove_uart0_data,
+	},
+	.resource		= dove_uart0_resources,
+	.num_resources		= ARRAY_SIZE(dove_uart0_resources),
+};
+
+void __init dove_uart0_init(void)
+{
+	platform_device_register(&dove_uart0);
+}
+
+/*****************************************************************************
+ * UART1
+ ****************************************************************************/
+static struct plat_serial8250_port dove_uart1_data[] = {
+	{
+		.mapbase	= DOVE_UART1_PHYS_BASE,
+		.membase	= (char *)DOVE_UART1_VIRT_BASE,
+		.irq		= IRQ_DOVE_UART_1,
+		.flags		= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= 0,
+	}, {
+	},
+};
+
+static struct resource dove_uart1_resources[] = {
+	{
+		.start		= DOVE_UART1_PHYS_BASE,
+		.end		= DOVE_UART1_PHYS_BASE + SZ_256 - 1,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= IRQ_DOVE_UART_1,
+		.end		= IRQ_DOVE_UART_1,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dove_uart1 = {
+	.name			= "serial8250",
+	.id			= 1,
+	.dev			= {
+		.platform_data	= dove_uart1_data,
+	},
+	.resource		= dove_uart1_resources,
+	.num_resources		= ARRAY_SIZE(dove_uart1_resources),
+};
+
+void __init dove_uart1_init(void)
+{
+	platform_device_register(&dove_uart1);
+}
+
+/*****************************************************************************
+ * UART2
+ ****************************************************************************/
+static struct plat_serial8250_port dove_uart2_data[] = {
+	{
+		.mapbase	= DOVE_UART2_PHYS_BASE,
+		.membase	= (char *)DOVE_UART2_VIRT_BASE,
+		.irq		= IRQ_DOVE_UART_2,
+		.flags		= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= 0,
+	}, {
+	},
+};
+
+static struct resource dove_uart2_resources[] = {
+	{
+		.start		= DOVE_UART2_PHYS_BASE,
+		.end		= DOVE_UART2_PHYS_BASE + SZ_256 - 1,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= IRQ_DOVE_UART_2,
+		.end		= IRQ_DOVE_UART_2,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dove_uart2 = {
+	.name			= "serial8250",
+	.id			= 2,
+	.dev			= {
+		.platform_data	= dove_uart2_data,
+	},
+	.resource		= dove_uart2_resources,
+	.num_resources		= ARRAY_SIZE(dove_uart2_resources),
+};
+
+void __init dove_uart2_init(void)
+{
+	platform_device_register(&dove_uart2);
+}
+
+/*****************************************************************************
+ * UART3
+ ****************************************************************************/
+static struct plat_serial8250_port dove_uart3_data[] = {
+	{
+		.mapbase	= DOVE_UART3_PHYS_BASE,
+		.membase	= (char *)DOVE_UART3_VIRT_BASE,
+		.irq		= IRQ_DOVE_UART_3,
+		.flags		= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= 0,
+	}, {
+	},
+};
+
+static struct resource dove_uart3_resources[] = {
+	{
+		.start		= DOVE_UART3_PHYS_BASE,
+		.end		= DOVE_UART3_PHYS_BASE + SZ_256 - 1,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= IRQ_DOVE_UART_3,
+		.end		= IRQ_DOVE_UART_3,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dove_uart3 = {
+	.name			= "serial8250",
+	.id			= 3,
+	.dev			= {
+		.platform_data	= dove_uart3_data,
+	},
+	.resource		= dove_uart3_resources,
+	.num_resources		= ARRAY_SIZE(dove_uart3_resources),
+};
+
+void __init dove_uart3_init(void)
+{
+	platform_device_register(&dove_uart3);
+}
+
+/*****************************************************************************
+ * SPI0
+ ****************************************************************************/
+static struct orion_spi_info dove_spi0_data = {
+	.tclk		= 0,
+};
+
+static struct resource dove_spi0_resources[] = {
+	{
+		.start	= DOVE_SPI0_PHYS_BASE,
+		.end	= DOVE_SPI0_PHYS_BASE + SZ_512 - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_DOVE_SPI0,
+		.end	= IRQ_DOVE_SPI0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dove_spi0 = {
+	.name		= "orion_spi",
+	.id		= 0,
+	.resource	= dove_spi0_resources,
+	.dev		= {
+		.platform_data	= &dove_spi0_data,
+	},
+	.num_resources	= ARRAY_SIZE(dove_spi0_resources),
+};
+
+void __init dove_spi0_init(void)
+{
+	platform_device_register(&dove_spi0);
+}
+
+/*****************************************************************************
+ * SPI1
+ ****************************************************************************/
+static struct orion_spi_info dove_spi1_data = {
+	.tclk		= 0,
+};
+
+static struct resource dove_spi1_resources[] = {
+	{
+		.start	= DOVE_SPI1_PHYS_BASE,
+		.end	= DOVE_SPI1_PHYS_BASE + SZ_512 - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_DOVE_SPI1,
+		.end	= IRQ_DOVE_SPI1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dove_spi1 = {
+	.name		= "orion_spi",
+	.id		= 1,
+	.resource	= dove_spi1_resources,
+	.dev		= {
+		.platform_data	= &dove_spi1_data,
+	},
+	.num_resources	= ARRAY_SIZE(dove_spi1_resources),
+};
+
+void __init dove_spi1_init(void)
+{
+	platform_device_register(&dove_spi1);
+}
+
+/*****************************************************************************
+ * I2C
+ ****************************************************************************/
+static struct mv64xxx_i2c_pdata dove_i2c_data = {
+	.freq_m		= 10, /* assumes 166 MHz TCLK gets 94.3kHz */
+	.freq_n		= 3,
+	.timeout	= 1000, /* Default timeout of 1 second */
+};
+
+static struct resource dove_i2c_resources[] = {
+	{
+		.name	= "i2c base",
+		.start	= DOVE_I2C_PHYS_BASE,
+		.end	= DOVE_I2C_PHYS_BASE + 0x20 - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.name	= "i2c irq",
+		.start	= IRQ_DOVE_I2C,
+		.end	= IRQ_DOVE_I2C,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dove_i2c = {
+	.name		= MV64XXX_I2C_CTLR_NAME,
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(dove_i2c_resources),
+	.resource	= dove_i2c_resources,
+	.dev		= {
+		.platform_data = &dove_i2c_data,
+	},
+};
+
+void __init dove_i2c_init(void)
+{
+	platform_device_register(&dove_i2c);
+}
+
+/*****************************************************************************
+ * Time handling
+ ****************************************************************************/
+static int get_tclk(void)
+{
+	/* use DOVE_RESET_SAMPLE_HI/LO to detect tclk */
+	return 166666667;
+}
+
+static void dove_timer_init(void)
+{
+	orion_time_init(IRQ_DOVE_BRIDGE, get_tclk());
+}
+
+struct sys_timer dove_timer = {
+	.init = dove_timer_init,
+};
+
+/*****************************************************************************
+ * XOR
+ ****************************************************************************/
+static struct mv_xor_platform_shared_data dove_xor_shared_data = {
+	.dram		= &dove_mbus_dram_info,
+};
+
+/*****************************************************************************
+ * XOR 0
+ ****************************************************************************/
+static u64 dove_xor0_dmamask = DMA_BIT_MASK(32);
+
+static struct resource dove_xor0_shared_resources[] = {
+	{
+		.name	= "xor 0 low",
+		.start	= DOVE_XOR0_PHYS_BASE,
+		.end	= DOVE_XOR0_PHYS_BASE + 0xff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.name	= "xor 0 high",
+		.start	= DOVE_XOR0_HIGH_PHYS_BASE,
+		.end	= DOVE_XOR0_HIGH_PHYS_BASE + 0xff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device dove_xor0_shared = {
+	.name		= MV_XOR_SHARED_NAME,
+	.id		= 0,
+	.dev		= {
+		.platform_data = &dove_xor_shared_data,
+	},
+	.num_resources	= ARRAY_SIZE(dove_xor0_shared_resources),
+	.resource	= dove_xor0_shared_resources,
+};
+
+static struct resource dove_xor00_resources[] = {
+	[0] = {
+		.start	= IRQ_DOVE_XOR_00,
+		.end	= IRQ_DOVE_XOR_00,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct mv_xor_platform_data dove_xor00_data = {
+	.shared		= &dove_xor0_shared,
+	.hw_id		= 0,
+	.pool_size	= PAGE_SIZE,
+};
+
+static struct platform_device dove_xor00_channel = {
+	.name		= MV_XOR_NAME,
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(dove_xor00_resources),
+	.resource	= dove_xor00_resources,
+	.dev		= {
+		.dma_mask		= &dove_xor0_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(64),
+		.platform_data		= (void *)&dove_xor00_data,
+	},
+};
+
+static struct resource dove_xor01_resources[] = {
+	[0] = {
+		.start	= IRQ_DOVE_XOR_01,
+		.end	= IRQ_DOVE_XOR_01,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct mv_xor_platform_data dove_xor01_data = {
+	.shared		= &dove_xor0_shared,
+	.hw_id		= 1,
+	.pool_size	= PAGE_SIZE,
+};
+
+static struct platform_device dove_xor01_channel = {
+	.name		= MV_XOR_NAME,
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(dove_xor01_resources),
+	.resource	= dove_xor01_resources,
+	.dev		= {
+		.dma_mask		= &dove_xor0_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(64),
+		.platform_data		= (void *)&dove_xor01_data,
+	},
+};
+
+void __init dove_xor0_init(void)
+{
+	platform_device_register(&dove_xor0_shared);
+
+	/*
+	 * two engines can't do memset simultaneously, this limitation
+	 * satisfied by removing memset support from one of the engines.
+	 */
+	dma_cap_set(DMA_MEMCPY, dove_xor00_data.cap_mask);
+	dma_cap_set(DMA_XOR, dove_xor00_data.cap_mask);
+	platform_device_register(&dove_xor00_channel);
+
+	dma_cap_set(DMA_MEMCPY, dove_xor01_data.cap_mask);
+	dma_cap_set(DMA_MEMSET, dove_xor01_data.cap_mask);
+	dma_cap_set(DMA_XOR, dove_xor01_data.cap_mask);
+	platform_device_register(&dove_xor01_channel);
+}
+
+/*****************************************************************************
+ * XOR 1
+ ****************************************************************************/
+static u64 dove_xor1_dmamask = DMA_BIT_MASK(32);
+
+static struct resource dove_xor1_shared_resources[] = {
+	{
+		.name	= "xor 0 low",
+		.start	= DOVE_XOR1_PHYS_BASE,
+		.end	= DOVE_XOR1_PHYS_BASE + 0xff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.name	= "xor 0 high",
+		.start	= DOVE_XOR1_HIGH_PHYS_BASE,
+		.end	= DOVE_XOR1_HIGH_PHYS_BASE + 0xff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device dove_xor1_shared = {
+	.name		= MV_XOR_SHARED_NAME,
+	.id		= 1,
+	.dev		= {
+		.platform_data = &dove_xor_shared_data,
+	},
+	.num_resources	= ARRAY_SIZE(dove_xor1_shared_resources),
+	.resource	= dove_xor1_shared_resources,
+};
+
+static struct resource dove_xor10_resources[] = {
+	[0] = {
+		.start	= IRQ_DOVE_XOR_10,
+		.end	= IRQ_DOVE_XOR_10,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct mv_xor_platform_data dove_xor10_data = {
+	.shared		= &dove_xor1_shared,
+	.hw_id		= 0,
+	.pool_size	= PAGE_SIZE,
+};
+
+static struct platform_device dove_xor10_channel = {
+	.name		= MV_XOR_NAME,
+	.id		= 2,
+	.num_resources	= ARRAY_SIZE(dove_xor10_resources),
+	.resource	= dove_xor10_resources,
+	.dev		= {
+		.dma_mask		= &dove_xor1_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(64),
+		.platform_data		= (void *)&dove_xor10_data,
+	},
+};
+
+static struct resource dove_xor11_resources[] = {
+	[0] = {
+		.start	= IRQ_DOVE_XOR_11,
+		.end	= IRQ_DOVE_XOR_11,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct mv_xor_platform_data dove_xor11_data = {
+	.shared		= &dove_xor1_shared,
+	.hw_id		= 1,
+	.pool_size	= PAGE_SIZE,
+};
+
+static struct platform_device dove_xor11_channel = {
+	.name		= MV_XOR_NAME,
+	.id		= 3,
+	.num_resources	= ARRAY_SIZE(dove_xor11_resources),
+	.resource	= dove_xor11_resources,
+	.dev		= {
+		.dma_mask		= &dove_xor1_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(64),
+		.platform_data		= (void *)&dove_xor11_data,
+	},
+};
+
+void __init dove_xor1_init(void)
+{
+	platform_device_register(&dove_xor1_shared);
+
+	/*
+	 * two engines can't do memset simultaneously, this limitation
+	 * satisfied by removing memset support from one of the engines.
+	 */
+	dma_cap_set(DMA_MEMCPY, dove_xor10_data.cap_mask);
+	dma_cap_set(DMA_XOR, dove_xor10_data.cap_mask);
+	platform_device_register(&dove_xor10_channel);
+
+	dma_cap_set(DMA_MEMCPY, dove_xor11_data.cap_mask);
+	dma_cap_set(DMA_MEMSET, dove_xor11_data.cap_mask);
+	dma_cap_set(DMA_XOR, dove_xor11_data.cap_mask);
+	platform_device_register(&dove_xor11_channel);
+}
+
+void __init dove_init(void)
+{
+	int tclk;
+
+	tclk = get_tclk();
+
+	printk(KERN_INFO "Dove 88AP510 SoC, ");
+	printk(KERN_INFO "TCLK = %dMHz\n", (tclk + 499999) / 1000000);
+
+#ifdef CONFIG_CACHE_TAUROS2
+	tauros2_init();
+#endif
+	dove_setup_cpu_mbus();
+
+	dove_ge00_shared_data.t_clk = tclk;
+	dove_uart0_data[0].uartclk = tclk;
+	dove_uart1_data[0].uartclk = tclk;
+	dove_uart2_data[0].uartclk = tclk;
+	dove_uart3_data[0].uartclk = tclk;
+	dove_spi0_data.tclk = tclk;
+	dove_spi1_data.tclk = tclk;
+
+	/* internal devices that every board has */
+	dove_rtc_init();
+	dove_xor0_init();
+	dove_xor1_init();
+}

arch/arm/mach-dove/common.h

@@ -0,0 +1,40 @@
+/*
+ * arch/arm/mach-dove/common.h
+ *
+ * Core functions for Marvell Dove 88AP510 System On Chip
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ARCH_DOVE_COMMON_H
+#define __ARCH_DOVE_COMMON_H
+
+struct mv643xx_eth_platform_data;
+struct mv_sata_platform_data;
+
+extern struct sys_timer dove_timer;
+extern struct mbus_dram_target_info dove_mbus_dram_info;
+
+/*
+ * Basic Dove init functions used early by machine-setup.
+ */
+void dove_map_io(void);
+void dove_init(void);
+void dove_init_irq(void);
+void dove_setup_cpu_mbus(void);
+void dove_ge00_init(struct mv643xx_eth_platform_data *eth_data);
+void dove_sata_init(struct mv_sata_platform_data *sata_data);
+void dove_pcie_init(int init_port0, int init_port1);
+void dove_ehci0_init(void);
+void dove_ehci1_init(void);
+void dove_uart0_init(void);
+void dove_uart1_init(void);
+void dove_uart2_init(void);
+void dove_uart3_init(void);
+void dove_spi0_init(void);
+void dove_spi1_init(void);
+void dove_i2c_init(void);
+
+#endif

arch/arm/mach-dove/dove-db-setup.c

@@ -0,0 +1,102 @@
+/*
+ * arch/arm/mach-dove/dove-db-setup.c
+ *
+ * Marvell DB-MV88AP510-BP Development Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/nand.h>
+#include <linux/timer.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/i2c.h>
+#include <linux/pci.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/orion_spi.h>
+#include <linux/spi/flash.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/dove.h>
+#include "common.h"
+
+static struct mv643xx_eth_platform_data dove_db_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR_DEFAULT,
+};
+
+static struct mv_sata_platform_data dove_db_sata_data = {
+	.n_ports        = 1,
+};
+
+/*****************************************************************************
+ * SPI Devices:
+ * 	SPI0: 4M Flash ST-M25P32-VMF6P
+ ****************************************************************************/
+static const struct flash_platform_data dove_db_spi_flash_data = {
+	.type		= "m25p64",
+};
+
+static struct spi_board_info __initdata dove_db_spi_flash_info[] = {
+	{
+		.modalias       = "m25p80",
+		.platform_data  = &dove_db_spi_flash_data,
+		.irq            = -1,
+		.max_speed_hz   = 20000000,
+		.bus_num        = 0,
+		.chip_select    = 0,
+	},
+};
+
+/*****************************************************************************
+ * PCI
+ ****************************************************************************/
+static int __init dove_db_pci_init(void)
+{
+	if (machine_is_dove_db())
+		dove_pcie_init(1, 1);
+
+	return 0;
+}
+
+subsys_initcall(dove_db_pci_init);
+
+/*****************************************************************************
+ * Board Init
+ ****************************************************************************/
+static void __init dove_db_init(void)
+{
+	/*
+	 * Basic Dove setup. Needs to be called early.
+	 */
+	dove_init();
+
+	dove_ge00_init(&dove_db_ge00_data);
+	dove_ehci0_init();
+	dove_ehci1_init();
+	dove_sata_init(&dove_db_sata_data);
+	dove_spi0_init();
+	dove_spi1_init();
+	dove_uart0_init();
+	dove_uart1_init();
+	dove_i2c_init();
+	spi_register_board_info(dove_db_spi_flash_info,
+				ARRAY_SIZE(dove_db_spi_flash_info));
+}
+
+MACHINE_START(DOVE_DB, "Marvell DB-MV88AP510-BP Development Board")
+	.phys_io	= DOVE_SB_REGS_PHYS_BASE,
+	.io_pg_offst	= ((DOVE_SB_REGS_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.init_machine	= dove_db_init,
+	.map_io		= dove_map_io,
+	.init_irq	= dove_init_irq,
+	.timer		= &dove_timer,
+MACHINE_END

arch/arm/mach-dove/include/mach/bridge-regs.h

@@ -0,0 +1,58 @@
+/*
+ * arch/arm/mach-dove/include/mach/bridge-regs.h
+ *
+ * Mbus-L to Mbus Bridge Registers
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_BRIDGE_REGS_H
+#define __ASM_ARCH_BRIDGE_REGS_H
+
+#include <mach/dove.h>
+
+#define CPU_CONFIG		(BRIDGE_VIRT_BASE | 0x0000)
+
+#define CPU_CONTROL		(BRIDGE_VIRT_BASE | 0x0104)
+#define  CPU_CTRL_PCIE0_LINK	0x00000001
+#define  CPU_RESET		0x00000002
+#define  CPU_CTRL_PCIE1_LINK	0x00000008
+
+#define RSTOUTn_MASK		(BRIDGE_VIRT_BASE | 0x0108)
+#define  SOFT_RESET_OUT_EN	0x00000004
+
+#define SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE | 0x010c)
+#define  SOFT_RESET		0x00000001
+
+#define BRIDGE_CAUSE		(BRIDGE_VIRT_BASE | 0x0110)
+#define BRIDGE_MASK		(BRIDGE_VIRT_BASE | 0x0114)
+#define  BRIDGE_INT_TIMER0	0x0002
+#define  BRIDGE_INT_TIMER1	0x0004
+#define  BRIDGE_INT_TIMER1_CLR	(~0x0004)
+
+#define IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0200)
+#define IRQ_CAUSE_LOW_OFF	0x0000
+#define IRQ_MASK_LOW_OFF	0x0004
+#define FIQ_MASK_LOW_OFF	0x0008
+#define ENDPOINT_MASK_LOW_OFF	0x000c
+#define IRQ_CAUSE_HIGH_OFF	0x0010
+#define IRQ_MASK_HIGH_OFF	0x0014
+#define FIQ_MASK_HIGH_OFF	0x0018
+#define ENDPOINT_MASK_HIGH_OFF	0x001c
+#define PCIE_INTERRUPT_MASK_OFF	0x0020
+
+#define IRQ_MASK_LOW		(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF)
+#define FIQ_MASK_LOW		(IRQ_VIRT_BASE + FIQ_MASK_LOW_OFF)
+#define ENDPOINT_MASK_LOW	(IRQ_VIRT_BASE + ENDPOINT_MASK_LOW_OFF)
+#define IRQ_MASK_HIGH		(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF)
+#define FIQ_MASK_HIGH		(IRQ_VIRT_BASE + FIQ_MASK_HIGH_OFF)
+#define ENDPOINT_MASK_HIGH	(IRQ_VIRT_BASE + ENDPOINT_MASK_HIGH_OFF)
+#define PCIE_INTERRUPT_MASK	(IRQ_VIRT_BASE + PCIE_INTERRUPT_MASK_OFF)
+
+#define POWER_MANAGEMENT	(BRIDGE_VIRT_BASE | 0x011c)
+
+#define TIMER_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0300)
+
+#endif

arch/arm/mach-dove/include/mach/debug-macro.S

@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-dove/include/mach/debug-macro.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <mach/bridge-regs.h>
+
+	.macro	addruart,rx
+	mrc	p15, 0, \rx, c1, c0
+	tst	\rx, #1					@ MMU enabled?
+	ldreq	\rx, =DOVE_SB_REGS_PHYS_BASE
+	ldrne	\rx, =DOVE_SB_REGS_VIRT_BASE
+	orr	\rx, \rx, #0x00012000
+	.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>

arch/arm/mach-dove/include/mach/dove.h

@@ -0,0 +1,180 @@
+/*
+ * arch/arm/mach-dove/include/mach/dove.h
+ *
+ * Generic definitions for Marvell Dove 88AP510 SoC
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_DOVE_H
+#define __ASM_ARCH_DOVE_H
+
+#include <mach/vmalloc.h>
+
+/*
+ * Marvell Dove address maps.
+ *
+ * phys		virt		size
+ * c8000000	fdb00000	1M	Cryptographic SRAM
+ * e0000000	@runtime	128M	PCIe-0 Memory space
+ * e8000000	@runtime	128M	PCIe-1 Memory space
+ * f1000000	fde00000	8M	on-chip south-bridge registers
+ * f1800000	fe600000	8M	on-chip north-bridge registers
+ * f2000000	fee00000	1M	PCIe-0 I/O space
+ * f2100000	fef00000	1M	PCIe-1 I/O space
+ */
+
+#define DOVE_CESA_PHYS_BASE		0xc8000000
+#define DOVE_CESA_VIRT_BASE		0xfdb00000
+#define DOVE_CESA_SIZE			SZ_1M
+
+#define DOVE_PCIE0_MEM_PHYS_BASE	0xe0000000
+#define DOVE_PCIE0_MEM_SIZE		SZ_128M
+
+#define DOVE_PCIE1_MEM_PHYS_BASE	0xe8000000
+#define DOVE_PCIE1_MEM_SIZE		SZ_128M
+
+#define DOVE_BOOTROM_PHYS_BASE		0xf8000000
+#define DOVE_BOOTROM_SIZE		SZ_128M
+
+#define DOVE_SCRATCHPAD_PHYS_BASE	0xf0000000
+#define DOVE_SCRATCHPAD_VIRT_BASE	0xfdd00000
+#define DOVE_SCRATCHPAD_SIZE		SZ_1M
+
+#define DOVE_SB_REGS_PHYS_BASE		0xf1000000
+#define DOVE_SB_REGS_VIRT_BASE		0xfde00000
+#define DOVE_SB_REGS_SIZE		SZ_8M
+
+#define DOVE_NB_REGS_PHYS_BASE		0xf1800000
+#define DOVE_NB_REGS_VIRT_BASE		0xfe600000
+#define DOVE_NB_REGS_SIZE		SZ_8M
+
+#define DOVE_PCIE0_IO_PHYS_BASE		0xf2000000
+#define DOVE_PCIE0_IO_VIRT_BASE		0xfee00000
+#define DOVE_PCIE0_IO_BUS_BASE		0x00000000
+#define DOVE_PCIE0_IO_SIZE		SZ_1M
+
+#define DOVE_PCIE1_IO_PHYS_BASE		0xf2100000
+#define DOVE_PCIE1_IO_VIRT_BASE		0xfef00000
+#define DOVE_PCIE1_IO_BUS_BASE		0x00100000
+#define DOVE_PCIE1_IO_SIZE		SZ_1M
+
+/*
+ * Dove Core Registers Map
+ */
+
+/* SPI, I2C, UART */
+#define DOVE_I2C_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x11000)
+#define DOVE_UART0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x12000)
+#define DOVE_UART0_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x12000)
+#define DOVE_UART1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x12100)
+#define DOVE_UART1_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x12100)
+#define DOVE_UART2_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x12200)
+#define DOVE_UART2_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x12200)
+#define DOVE_UART3_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x12300)
+#define DOVE_UART3_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x12300)
+#define DOVE_SPI0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x10600)
+#define DOVE_SPI1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x14600)
+
+/* North-South Bridge */
+#define BRIDGE_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x20000)
+
+/* Cryptographic Engine */
+#define DOVE_CRYPT_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x30000)
+
+/* PCIe 0 */
+#define DOVE_PCIE0_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x40000)
+
+/* USB */
+#define DOVE_USB0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x50000)
+#define DOVE_USB1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x51000)
+
+/* XOR 0 Engine */
+#define DOVE_XOR0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x60800)
+#define DOVE_XOR0_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x60800)
+#define DOVE_XOR0_HIGH_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x60A00)
+#define DOVE_XOR0_HIGH_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x60A00)
+
+/* XOR 1 Engine */
+#define DOVE_XOR1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x60900)
+#define DOVE_XOR1_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x60900)
+#define DOVE_XOR1_HIGH_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x60B00)
+#define DOVE_XOR1_HIGH_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x60B00)
+
+/* Gigabit Ethernet */
+#define DOVE_GE00_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x70000)
+
+/* PCIe 1 */
+#define DOVE_PCIE1_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x80000)
+
+/* CAFE */
+#define DOVE_SDIO0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x92000)
+#define DOVE_SDIO1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x90000)
+#define DOVE_CAM_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x94000)
+#define DOVE_CAFE_WIN_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x98000)
+
+/* SATA */
+#define DOVE_SATA_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xa0000)
+
+/* I2S/SPDIF */
+#define DOVE_AUD0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xb0000)
+#define DOVE_AUD1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xb4000)
+
+/* NAND Flash Controller */
+#define DOVE_NFC_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xc0000)
+
+/* MPP, GPIO, Reset Sampling */
+#define DOVE_MPP_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xd0200)
+#define DOVE_PMU_MPP_GENERAL_CTRL (DOVE_MPP_VIRT_BASE + 0x10)
+#define DOVE_RESET_SAMPLE_LO	(DOVE_MPP_VIRT_BASE | 0x014)
+#define DOVE_RESET_SAMPLE_HI	(DOVE_MPP_VIRT_BASE | 0x018)
+#define DOVE_GPIO_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xd0400)
+#define DOVE_MPP_GENERAL_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xe803c)
+#define  DOVE_AU1_SPDIFO_GPIO_EN	(1 << 1)
+#define  DOVE_NAND_GPIO_EN		(1 << 0)
+#define DOVE_MPP_CTRL4_VIRT_BASE	(DOVE_GPIO_VIRT_BASE + 0x40)
+
+
+/* Power Management */
+#define DOVE_PMU_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xd0000)
+
+/* Real Time Clock */
+#define DOVE_RTC_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xd8500)
+
+/* AC97 */
+#define DOVE_AC97_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xe0000)
+#define DOVE_AC97_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xe0000)
+
+/* Peripheral DMA */
+#define DOVE_PDMA_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xe4000)
+#define DOVE_PDMA_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xe4000)
+
+#define DOVE_GLOBAL_CONFIG_1	(DOVE_SB_REGS_VIRT_BASE | 0xe802C)
+#define  DOVE_TWSI_ENABLE_OPTION1	(1 << 7)
+#define DOVE_GLOBAL_CONFIG_2	(DOVE_SB_REGS_VIRT_BASE | 0xe8030)
+#define  DOVE_TWSI_ENABLE_OPTION2	(1 << 20)
+#define  DOVE_TWSI_ENABLE_OPTION3	(1 << 21)
+#define  DOVE_TWSI_OPTION3_GPIO		(1 << 22)
+#define DOVE_SSP_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xec000)
+#define DOVE_SSP_CTRL_STATUS_1	(DOVE_SB_REGS_VIRT_BASE | 0xe8034)
+#define  DOVE_SSP_ON_AU1		(1 << 0)
+#define  DOVE_SSP_CLOCK_ENABLE		(1 << 1)
+#define  DOVE_SSP_BPB_CLOCK_SRC_SSP	(1 << 11)
+/* Memory Controller */
+#define DOVE_MC_VIRT_BASE	(DOVE_NB_REGS_VIRT_BASE | 0x00000)
+
+/* LCD Controller */
+#define DOVE_LCD_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE | 0x10000)
+#define DOVE_LCD1_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE | 0x20000)
+#define DOVE_LCD2_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE | 0x10000)
+#define DOVE_LCD_DCON_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE | 0x30000)
+
+/* Graphic Engine */
+#define DOVE_GPU_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE | 0x40000)
+
+/* Video Engine */
+#define DOVE_VPU_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE | 0x400000)
+
+#endif

arch/arm/mach-dove/include/mach/entry-macro.S

@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-dove/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for Marvell Dove platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <mach/bridge-regs.h>
+
+	.macro  disable_fiq
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro  get_irqnr_preamble, base, tmp
+	ldr	\base, =IRQ_VIRT_BASE
+	.endm
+
+	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+	@ check low interrupts
+	ldr	\irqstat, [\base, #IRQ_CAUSE_LOW_OFF]
+	ldr	\tmp, [\base, #IRQ_MASK_LOW_OFF]
+	mov	\irqnr, #31
+	ands	\irqstat, \irqstat, \tmp
+
+	@ if no low interrupts set, check high interrupts
+	ldreq	\irqstat, [\base, #IRQ_CAUSE_HIGH_OFF]
+	ldreq	\tmp, [\base, #IRQ_MASK_HIGH_OFF]
+	moveq	\irqnr, #63
+	andeqs	\irqstat, \irqstat, \tmp
+
+	@ find first active interrupt source
+	clzne	\irqstat, \irqstat
+	subne	\irqnr, \irqnr, \irqstat
+	.endm

arch/arm/mach-dove/include/mach/gpio.h

@@ -0,0 +1,49 @@
+/*
+ * arch/arm/mach-dove/include/mach/gpio.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+
+#include <asm/errno.h>
+#include <mach/irqs.h>
+#include <plat/gpio.h>
+#include <asm-generic/gpio.h>		/* cansleep wrappers */
+
+#define GPIO_MAX	64
+
+#define GPIO_BASE_LO		(DOVE_GPIO_VIRT_BASE + 0x00)
+#define GPIO_BASE_HI		(DOVE_GPIO_VIRT_BASE + 0x20)
+
+#define GPIO_BASE(pin)		((pin < 32) ? GPIO_BASE_LO : GPIO_BASE_HI)
+
+#define GPIO_OUT(pin)		(GPIO_BASE(pin) + 0x00)
+#define GPIO_IO_CONF(pin)	(GPIO_BASE(pin) + 0x04)
+#define GPIO_BLINK_EN(pin)	(GPIO_BASE(pin) + 0x08)
+#define GPIO_IN_POL(pin)	(GPIO_BASE(pin) + 0x0c)
+#define GPIO_DATA_IN(pin)	(GPIO_BASE(pin) + 0x10)
+#define GPIO_EDGE_CAUSE(pin)	(GPIO_BASE(pin) + 0x14)
+#define GPIO_EDGE_MASK(pin)	(GPIO_BASE(pin) + 0x18)
+#define GPIO_LEVEL_MASK(pin)	(GPIO_BASE(pin) + 0x1c)
+
+static inline int gpio_to_irq(int pin)
+{
+	if (pin < NR_GPIO_IRQS)
+		return pin + IRQ_DOVE_GPIO_START;
+
+	return -EINVAL;
+}
+
+static inline int irq_to_gpio(int irq)
+{
+	if (IRQ_DOVE_GPIO_START < irq && irq < NR_IRQS)
+		return irq - IRQ_DOVE_GPIO_START;
+
+	return -EINVAL;
+}
+
+#endif

arch/arm/mach-dove/include/mach/hardware.h

@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-dove/include/mach/hardware.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include "dove.h"
+
+#define pcibios_assign_all_busses()	1
+
+#define PCIBIOS_MIN_IO			0x1000
+#define PCIBIOS_MIN_MEM			0x01000000
+#define PCIMEM_BASE			DOVE_PCIE0_MEM_PHYS_BASE
+
+
+/* Macros below are required for compatibility with PXA AC'97 driver.	*/
+#define __REG(x)	(*((volatile u32 *)((x) - DOVE_SB_REGS_PHYS_BASE + \
+				DOVE_SB_REGS_VIRT_BASE)))
+#define __PREG(x)	(((u32)&(x)) - DOVE_SB_REGS_VIRT_BASE + \
+		DOVE_SB_REGS_PHYS_BASE)
+#endif

arch/arm/mach-dove/include/mach/io.h

@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-dove/include/mach/io.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#include "dove.h"
+
+#define IO_SPACE_LIMIT		0xffffffff
+
+#define __io(a)  ((void __iomem *)(((a) - DOVE_PCIE0_IO_PHYS_BASE) +\
+				   DOVE_PCIE0_IO_VIRT_BASE))
+#define __mem_pci(a)		(a)
+
+#endif

arch/arm/mach-dove/include/mach/irqs.h

@@ -0,0 +1,101 @@
+/*
+ * arch/arm/mach-dove/include/mach/irqs.h
+ *
+ * IRQ definitions for Marvell Dove 88AP510 SoC
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+/*
+ * Dove Low Interrupt Controller
+ */
+#define IRQ_DOVE_BRIDGE		0
+#define IRQ_DOVE_H2C		1
+#define IRQ_DOVE_C2H		2
+#define IRQ_DOVE_NAND		3
+#define IRQ_DOVE_PDMA		4
+#define IRQ_DOVE_SPI1		5
+#define IRQ_DOVE_SPI0		6
+#define IRQ_DOVE_UART_0		7
+#define IRQ_DOVE_UART_1		8
+#define IRQ_DOVE_UART_2		9
+#define IRQ_DOVE_UART_3		10
+#define IRQ_DOVE_I2C		11
+#define IRQ_DOVE_GPIO_0_7	12
+#define IRQ_DOVE_GPIO_8_15	13
+#define IRQ_DOVE_GPIO_16_23	14
+#define IRQ_DOVE_PCIE0_ERR	15
+#define IRQ_DOVE_PCIE0		16
+#define IRQ_DOVE_PCIE1_ERR	17
+#define IRQ_DOVE_PCIE1		18
+#define IRQ_DOVE_I2S0		19
+#define IRQ_DOVE_I2S0_ERR	20
+#define IRQ_DOVE_I2S1		21
+#define IRQ_DOVE_I2S1_ERR	22
+#define IRQ_DOVE_USB_ERR	23
+#define IRQ_DOVE_USB0		24
+#define IRQ_DOVE_USB1		25
+#define IRQ_DOVE_GE00_RX	26
+#define IRQ_DOVE_GE00_TX	27
+#define IRQ_DOVE_GE00_MISC	28
+#define IRQ_DOVE_GE00_SUM	29
+#define IRQ_DOVE_GE00_ERR	30
+#define IRQ_DOVE_CRYPTO		31
+
+/*
+ * Dove High Interrupt Controller
+ */
+#define IRQ_DOVE_AC97		32
+#define IRQ_DOVE_PMU		33
+#define IRQ_DOVE_CAM		34
+#define IRQ_DOVE_SDIO0		35
+#define IRQ_DOVE_SDIO1		36
+#define IRQ_DOVE_SDIO0_WAKEUP	37
+#define IRQ_DOVE_SDIO1_WAKEUP	38
+#define IRQ_DOVE_XOR_00		39
+#define IRQ_DOVE_XOR_01		40
+#define IRQ_DOVE_XOR0_ERR	41
+#define IRQ_DOVE_XOR_10		42
+#define IRQ_DOVE_XOR_11		43
+#define IRQ_DOVE_XOR1_ERR	44
+#define IRQ_DOVE_LCD_DCON	45
+#define IRQ_DOVE_LCD1		46
+#define IRQ_DOVE_LCD0		47
+#define IRQ_DOVE_GPU		48
+#define IRQ_DOVE_PERFORM_MNTR	49
+#define IRQ_DOVE_VPRO_DMA1	51
+#define IRQ_DOVE_SSP_TIMER	54
+#define IRQ_DOVE_SSP		55
+#define IRQ_DOVE_MC_L2_ERR	56
+#define IRQ_DOVE_CRYPTO_ERR	59
+#define IRQ_DOVE_GPIO_24_31	60
+#define IRQ_DOVE_HIGH_GPIO	61
+#define IRQ_DOVE_SATA		62
+
+/*
+ * DOVE General Purpose Pins
+ */
+#define IRQ_DOVE_GPIO_START	64
+#define NR_GPIO_IRQS		64
+
+/*
+ * PMU interrupts
+ */
+#define IRQ_DOVE_PMU_START	(IRQ_DOVE_GPIO_START + NR_GPIO_IRQS)
+#define NR_PMU_IRQS		7
+#define IRQ_DOVE_RTC		(IRQ_DOVE_PMU_START + 5)
+
+#define NR_IRQS			(IRQ_DOVE_PMU_START + NR_PMU_IRQS)
+
+/* Required for compatability with PXA AC97 driver.	*/
+#define IRQ_AC97		IRQ_DOVE_AC97
+/* Required for compatability with PXA DMA driver.	*/
+#define IRQ_DMA			IRQ_DOVE_PDMA
+/* Required for compatability with PXA NAND driver 	*/
+#define IRQ_NAND		IRQ_DOVE_NAND
+#endif

arch/arm/mach-dove/include/mach/memory.h

@@ -0,0 +1,10 @@
+/*
+ * arch/arm/mach-dove/include/mach/memory.h
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET		UL(0x00000000)
+
+#endif

arch/arm/mach-dove/include/mach/pm.h

@@ -0,0 +1,54 @@
+/*
+ * arch/arm/mach-dove/include/mach/pm.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_PM_H
+#define __ASM_ARCH_PM_H
+
+#include <asm/errno.h>
+#include <mach/irqs.h>
+
+#define CLOCK_GATING_CONTROL	(DOVE_PMU_VIRT_BASE + 0x38)
+#define  CLOCK_GATING_USB0_MASK		(1 << 0)
+#define  CLOCK_GATING_USB1_MASK		(1 << 1)
+#define  CLOCK_GATING_GBE_MASK		(1 << 2)
+#define  CLOCK_GATING_SATA_MASK		(1 << 3)
+#define  CLOCK_GATING_PCIE0_MASK	(1 << 4)
+#define  CLOCK_GATING_PCIE1_MASK	(1 << 5)
+#define  CLOCK_GATING_SDIO0_MASK	(1 << 8)
+#define  CLOCK_GATING_SDIO1_MASK	(1 << 9)
+#define  CLOCK_GATING_NAND_MASK		(1 << 10)
+#define  CLOCK_GATING_CAMERA_MASK	(1 << 11)
+#define  CLOCK_GATING_I2S0_MASK		(1 << 12)
+#define  CLOCK_GATING_I2S1_MASK		(1 << 13)
+#define  CLOCK_GATING_CRYPTO_MASK	(1 << 15)
+#define  CLOCK_GATING_AC97_MASK		(1 << 21)
+#define  CLOCK_GATING_PDMA_MASK		(1 << 22)
+#define  CLOCK_GATING_XOR0_MASK		(1 << 23)
+#define  CLOCK_GATING_XOR1_MASK		(1 << 24)
+#define  CLOCK_GATING_GIGA_PHY_MASK	(1 << 30)
+
+#define PMU_INTERRUPT_CAUSE	(DOVE_PMU_VIRT_BASE + 0x50)
+#define PMU_INTERRUPT_MASK	(DOVE_PMU_VIRT_BASE + 0x54)
+
+static inline int pmu_to_irq(int pin)
+{
+	if (pin < NR_PMU_IRQS)
+		return pin + IRQ_DOVE_PMU_START;
+
+	return -EINVAL;
+}
+
+static inline int irq_to_pmu(int irq)
+{
+	if (IRQ_DOVE_PMU_START < irq && irq < NR_IRQS)
+		return irq - IRQ_DOVE_PMU_START;
+
+	return -EINVAL;
+}
+
+#endif

arch/arm/mach-dove/include/mach/system.h

@@ -0,0 +1,36 @@
+/*
+ * arch/arm/mach-dove/include/mach/system.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/bridge-regs.h>
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode, const char *cmd)
+{
+	/*
+	 * Enable soft reset to assert RSTOUTn.
+	 */
+	writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
+
+	/*
+	 * Assert soft reset.
+	 */
+	writel(SOFT_RESET, SYSTEM_SOFT_RESET);
+
+	while (1)
+		;
+}
+
+
+#endif

arch/arm/mach-dove/include/mach/timex.h

@@ -0,0 +1,9 @@
+/*
+ * arch/arm/mach-dove/include/mach/timex.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define CLOCK_TICK_RATE		(100 * HZ)

arch/arm/mach-dove/include/mach/uncompress.h

@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-dove/include/mach/uncompress.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <mach/dove.h>
+
+#define UART_THR ((volatile unsigned char *)(DOVE_UART0_PHYS_BASE + 0x0))
+#define UART_LSR ((volatile unsigned char *)(DOVE_UART0_PHYS_BASE + 0x14))
+
+#define LSR_THRE	0x20
+
+static void putc(const char c)
+{
+	int i;
+
+	for (i = 0; i < 0x1000; i++) {
+		/* Transmit fifo not full? */
+		if (*UART_LSR & LSR_THRE)
+			break;
+	}
+
+	*UART_THR = c;
+}
+
+static void flush(void)
+{
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()

arch/arm/mach-dove/include/mach/vmalloc.h

@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-dove/include/mach/vmalloc.h
+ */
+
+#define VMALLOC_END	0xfd800000

arch/arm/mach-dove/irq.c

@@ -0,0 +1,133 @@
+/*
+ * arch/arm/mach-dove/irq.c
+ *
+ * Dove IRQ handling.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+#include <asm/mach/arch.h>
+#include <plat/irq.h>
+#include <asm/mach/irq.h>
+#include <mach/pm.h>
+#include <mach/bridge-regs.h>
+#include "common.h"
+
+static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+	int irqoff;
+	BUG_ON(irq < IRQ_DOVE_GPIO_0_7 || irq > IRQ_DOVE_HIGH_GPIO);
+
+	irqoff = irq <= IRQ_DOVE_GPIO_16_23 ? irq - IRQ_DOVE_GPIO_0_7 :
+		3 + irq - IRQ_DOVE_GPIO_24_31;
+
+	orion_gpio_irq_handler(irqoff << 3);
+	if (irq == IRQ_DOVE_HIGH_GPIO) {
+		orion_gpio_irq_handler(40);
+		orion_gpio_irq_handler(48);
+		orion_gpio_irq_handler(56);
+	}
+}
+
+static void pmu_irq_mask(unsigned int irq)
+{
+	int pin = irq_to_pmu(irq);
+	u32 u;
+
+	u = readl(PMU_INTERRUPT_MASK);
+	u &= ~(1 << (pin & 31));
+	writel(u, PMU_INTERRUPT_MASK);
+}
+
+static void pmu_irq_unmask(unsigned int irq)
+{
+	int pin = irq_to_pmu(irq);
+	u32 u;
+
+	u = readl(PMU_INTERRUPT_MASK);
+	u |= 1 << (pin & 31);
+	writel(u, PMU_INTERRUPT_MASK);
+}
+
+static void pmu_irq_ack(unsigned int irq)
+{
+	int pin = irq_to_pmu(irq);
+	u32 u;
+
+	u = ~(1 << (pin & 31));
+	writel(u, PMU_INTERRUPT_CAUSE);
+}
+
+static struct irq_chip pmu_irq_chip = {
+	.name		= "pmu_irq",
+	.mask		= pmu_irq_mask,
+	.unmask		= pmu_irq_unmask,
+	.ack		= pmu_irq_ack,
+};
+
+static void pmu_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+	unsigned long cause = readl(PMU_INTERRUPT_CAUSE);
+
+	cause &= readl(PMU_INTERRUPT_MASK);
+	if (cause == 0) {
+		do_bad_IRQ(irq, desc);
+		return;
+	}
+
+	for (irq = 0; irq < NR_PMU_IRQS; irq++) {
+		if (!(cause & (1 << irq)))
+			continue;
+		irq = pmu_to_irq(irq);
+		desc = irq_desc + irq;
+		desc_handle_irq(irq, desc);
+	}
+}
+
+void __init dove_init_irq(void)
+{
+	int i;
+
+	orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF));
+	orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF));
+
+	/*
+	 * Mask and clear GPIO IRQ interrupts.
+	 */
+	writel(0, GPIO_LEVEL_MASK(0));
+	writel(0, GPIO_EDGE_MASK(0));
+	writel(0, GPIO_EDGE_CAUSE(0));
+
+	/*
+	 * Mask and clear PMU interrupts
+	 */
+	writel(0, PMU_INTERRUPT_MASK);
+	writel(0, PMU_INTERRUPT_CAUSE);
+
+	for (i = IRQ_DOVE_GPIO_START; i < IRQ_DOVE_PMU_START; i++) {
+		set_irq_chip(i, &orion_gpio_irq_chip);
+		set_irq_handler(i, handle_level_irq);
+		irq_desc[i].status |= IRQ_LEVEL;
+		set_irq_flags(i, IRQF_VALID);
+	}
+	set_irq_chained_handler(IRQ_DOVE_GPIO_0_7, gpio_irq_handler);
+	set_irq_chained_handler(IRQ_DOVE_GPIO_8_15, gpio_irq_handler);
+	set_irq_chained_handler(IRQ_DOVE_GPIO_16_23, gpio_irq_handler);
+	set_irq_chained_handler(IRQ_DOVE_GPIO_24_31, gpio_irq_handler);
+	set_irq_chained_handler(IRQ_DOVE_HIGH_GPIO, gpio_irq_handler);
+
+	for (i = IRQ_DOVE_PMU_START; i < NR_IRQS; i++) {
+		set_irq_chip(i, &pmu_irq_chip);
+		set_irq_handler(i, handle_level_irq);
+		irq_desc[i].status |= IRQ_LEVEL;
+		set_irq_flags(i, IRQF_VALID);
+	}
+	set_irq_chained_handler(IRQ_DOVE_PMU, pmu_irq_handler);
+}

arch/arm/mach-dove/pcie.c

@@ -0,0 +1,238 @@
+/*
+ * arch/arm/mach-dove/pcie.c
+ *
+ * PCIe functions for Marvell Dove 88AP510 SoC
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/mbus.h>
+#include <asm/mach/pci.h>
+#include <asm/mach/arch.h>
+#include <asm/setup.h>
+#include <asm/delay.h>
+#include <plat/pcie.h>
+#include <mach/irqs.h>
+#include <mach/bridge-regs.h>
+#include "common.h"
+
+struct pcie_port {
+	u8			index;
+	u8			root_bus_nr;
+	void __iomem		*base;
+	spinlock_t		conf_lock;
+	char			io_space_name[16];
+	char			mem_space_name[16];
+	struct resource		res[2];
+};
+
+static struct pcie_port pcie_port[2];
+static int num_pcie_ports;
+
+
+static int __init dove_pcie_setup(int nr, struct pci_sys_data *sys)
+{
+	struct pcie_port *pp;
+
+	if (nr >= num_pcie_ports)
+		return 0;
+
+	pp = &pcie_port[nr];
+	pp->root_bus_nr = sys->busnr;
+
+	/*
+	 * Generic PCIe unit setup.
+	 */
+	orion_pcie_set_local_bus_nr(pp->base, sys->busnr);
+
+	orion_pcie_setup(pp->base, &dove_mbus_dram_info);
+
+	/*
+	 * IORESOURCE_IO
+	 */
+	snprintf(pp->io_space_name, sizeof(pp->io_space_name),
+		 "PCIe %d I/O", pp->index);
+	pp->io_space_name[sizeof(pp->io_space_name) - 1] = 0;
+	pp->res[0].name = pp->io_space_name;
+	if (pp->index == 0) {
+		pp->res[0].start = DOVE_PCIE0_IO_PHYS_BASE;
+		pp->res[0].end = pp->res[0].start + DOVE_PCIE0_IO_SIZE - 1;
+	} else {
+		pp->res[0].start = DOVE_PCIE1_IO_PHYS_BASE;
+		pp->res[0].end = pp->res[0].start + DOVE_PCIE1_IO_SIZE - 1;
+	}
+	pp->res[0].flags = IORESOURCE_IO;
+	if (request_resource(&ioport_resource, &pp->res[0]))
+		panic("Request PCIe IO resource failed\n");
+	sys->resource[0] = &pp->res[0];
+
+	/*
+	 * IORESOURCE_MEM
+	 */
+	snprintf(pp->mem_space_name, sizeof(pp->mem_space_name),
+		 "PCIe %d MEM", pp->index);
+	pp->mem_space_name[sizeof(pp->mem_space_name) - 1] = 0;
+	pp->res[1].name = pp->mem_space_name;
+	if (pp->index == 0) {
+		pp->res[1].start = DOVE_PCIE0_MEM_PHYS_BASE;
+		pp->res[1].end = pp->res[1].start + DOVE_PCIE0_MEM_SIZE - 1;
+	} else {
+		pp->res[1].start = DOVE_PCIE1_MEM_PHYS_BASE;
+		pp->res[1].end = pp->res[1].start + DOVE_PCIE1_MEM_SIZE - 1;
+	}
+	pp->res[1].flags = IORESOURCE_MEM;
+	if (request_resource(&iomem_resource, &pp->res[1]))
+		panic("Request PCIe Memory resource failed\n");
+	sys->resource[1] = &pp->res[1];
+
+	sys->resource[2] = NULL;
+
+	return 1;
+}
+
+static struct pcie_port *bus_to_port(int bus)
+{
+	int i;
+
+	for (i = num_pcie_ports - 1; i >= 0; i--) {
+		int rbus = pcie_port[i].root_bus_nr;
+		if (rbus != -1 && rbus <= bus)
+			break;
+	}
+
+	return i >= 0 ? pcie_port + i : NULL;
+}
+
+static int pcie_valid_config(struct pcie_port *pp, int bus, int dev)
+{
+	/*
+	 * Don't go out when trying to access nonexisting devices
+	 * on the local bus.
+	 */
+	if (bus == pp->root_bus_nr && dev > 1)
+		return 0;
+
+	return 1;
+}
+
+static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
+			int size, u32 *val)
+{
+	struct pcie_port *pp = bus_to_port(bus->number);
+	unsigned long flags;
+	int ret;
+
+	if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0) {
+		*val = 0xffffffff;
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	}
+
+	spin_lock_irqsave(&pp->conf_lock, flags);
+	ret = orion_pcie_rd_conf(pp->base, bus, devfn, where, size, val);
+	spin_unlock_irqrestore(&pp->conf_lock, flags);
+
+	return ret;
+}
+
+static int pcie_wr_conf(struct pci_bus *bus, u32 devfn,
+			int where, int size, u32 val)
+{
+	struct pcie_port *pp = bus_to_port(bus->number);
+	unsigned long flags;
+	int ret;
+
+	if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	spin_lock_irqsave(&pp->conf_lock, flags);
+	ret = orion_pcie_wr_conf(pp->base, bus, devfn, where, size, val);
+	spin_unlock_irqrestore(&pp->conf_lock, flags);
+
+	return ret;
+}
+
+static struct pci_ops pcie_ops = {
+	.read = pcie_rd_conf,
+	.write = pcie_wr_conf,
+};
+
+static void __devinit rc_pci_fixup(struct pci_dev *dev)
+{
+	/*
+	 * Prevent enumeration of root complex.
+	 */
+	if (dev->bus->parent == NULL && dev->devfn == 0) {
+		int i;
+
+		for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+			dev->resource[i].start = 0;
+			dev->resource[i].end   = 0;
+			dev->resource[i].flags = 0;
+		}
+	}
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup);
+
+static struct pci_bus __init *
+dove_pcie_scan_bus(int nr, struct pci_sys_data *sys)
+{
+	struct pci_bus *bus;
+
+	if (nr < num_pcie_ports) {
+		bus = pci_scan_bus(sys->busnr, &pcie_ops, sys);
+	} else {
+		bus = NULL;
+		BUG();
+	}
+
+	return bus;
+}
+
+static int __init dove_pcie_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	struct pcie_port *pp = bus_to_port(dev->bus->number);
+
+	return pp->index ? IRQ_DOVE_PCIE1 : IRQ_DOVE_PCIE0;
+}
+
+static struct hw_pci dove_pci __initdata = {
+	.nr_controllers	= 2,
+	.swizzle	= pci_std_swizzle,
+	.setup		= dove_pcie_setup,
+	.scan		= dove_pcie_scan_bus,
+	.map_irq	= dove_pcie_map_irq,
+};
+
+static void __init add_pcie_port(int index, unsigned long base)
+{
+	printk(KERN_INFO "Dove PCIe port %d: ", index);
+
+	if (orion_pcie_link_up((void __iomem *)base)) {
+		struct pcie_port *pp = &pcie_port[num_pcie_ports++];
+
+		printk(KERN_INFO "link up\n");
+
+		pp->index = index;
+		pp->root_bus_nr = -1;
+		pp->base = (void __iomem *)base;
+		spin_lock_init(&pp->conf_lock);
+		memset(pp->res, 0, sizeof(pp->res));
+	} else {
+		printk(KERN_INFO "link down, ignoring\n");
+	}
+}
+
+void __init dove_pcie_init(int init_port0, int init_port1)
+{
+	if (init_port0)
+		add_pcie_port(0, DOVE_PCIE0_VIRT_BASE);
+
+	if (init_port1)
+		add_pcie_port(1, DOVE_PCIE1_VIRT_BASE);
+
+	pci_common_init(&dove_pci);
+}

arch/arm/mach-iop13xx/include/mach/time.h

@@ -20,7 +20,6 @@
 #define IOP13XX_CORE_FREQ_1200		(5 << 16)
 
 void iop_init_time(unsigned long tickrate);
-unsigned long iop_gettimeoffset(void);
 
 static inline unsigned long iop13xx_core_freq(void)
 {
@@ -66,6 +65,13 @@ static inline unsigned long iop13xx_xsi_bus_ratio(void)
 	return 2;
 }
 
+static inline u32 read_tmr0(void)
+{
+	u32 val;
+	asm volatile("mrc p6, 0, %0, c0, c9, 0" : "=r" (val));
+	return val;
+}
+
 static inline void write_tmr0(u32 val)
 {
 	asm volatile("mcr p6, 0, %0, c0, c9, 0" : : "r" (val));
@@ -83,6 +89,11 @@ static inline u32 read_tcr0(void)
 	return val;
 }
 
+static inline void write_tcr0(u32 val)
+{
+	asm volatile("mcr p6, 0, %0, c2, c9, 0" : : "r" (val));
+}
+
 static inline u32 read_tcr1(void)
 {
 	u32 val;
@@ -90,6 +101,11 @@ static inline u32 read_tcr1(void)
 	return val;
 }
 
+static inline void write_tcr1(u32 val)
+{
+	asm volatile("mcr p6, 0, %0, c3, c9, 0" : : "r" (val));
+}
+
 static inline void write_trr0(u32 val)
 {
 	asm volatile("mcr p6, 0, %0, c4, c9, 0" : : "r" (val));

arch/arm/mach-iop13xx/iq81340mc.c

@@ -87,7 +87,6 @@ static void __init iq81340mc_timer_init(void)
 
 static struct sys_timer iq81340mc_timer = {
        .init       = iq81340mc_timer_init,
-       .offset     = iop_gettimeoffset,
 };
 
 MACHINE_START(IQ81340MC, "Intel IQ81340MC")

arch/arm/mach-iop13xx/iq81340sc.c

@@ -89,7 +89,6 @@ static void __init iq81340sc_timer_init(void)
 
 static struct sys_timer iq81340sc_timer = {
        .init       = iq81340sc_timer_init,
-       .offset     = iop_gettimeoffset,
 };
 
 MACHINE_START(IQ81340SC, "Intel IQ81340SC")

arch/arm/mach-iop32x/em7210.c

@@ -42,7 +42,6 @@ static void __init em7210_timer_init(void)
 
 static struct sys_timer em7210_timer = {
 	.init		= em7210_timer_init,
-	.offset		= iop_gettimeoffset,
 };
 
 /*

arch/arm/mach-iop32x/glantank.c

@@ -47,7 +47,6 @@ static void __init glantank_timer_init(void)
 
 static struct sys_timer glantank_timer = {
 	.init		= glantank_timer_init,
-	.offset		= iop_gettimeoffset,
 };
 
 

arch/arm/mach-iop32x/iq31244.c

@@ -78,7 +78,6 @@ static void __init iq31244_timer_init(void)
 
 static struct sys_timer iq31244_timer = {
 	.init		= iq31244_timer_init,
-	.offset		= iop_gettimeoffset,
 };
 
 

arch/arm/mach-iop32x/iq80321.c

@@ -46,7 +46,6 @@ static void __init iq80321_timer_init(void)
 
 static struct sys_timer iq80321_timer = {
 	.init		= iq80321_timer_init,
-	.offset		= iop_gettimeoffset,
 };
 
 

arch/arm/mach-iop32x/n2100.c

@@ -53,7 +53,6 @@ static void __init n2100_timer_init(void)
 
 static struct sys_timer n2100_timer = {
 	.init		= n2100_timer_init,
-	.offset		= iop_gettimeoffset,
 };
 
 

arch/arm/mach-iop33x/iq80331.c

@@ -48,7 +48,6 @@ static void __init iq80331_timer_init(void)
 
 static struct sys_timer iq80331_timer = {
 	.init		= iq80331_timer_init,
-	.offset		= iop_gettimeoffset,
 };
 
 

arch/arm/mach-iop33x/iq80332.c

@@ -48,7 +48,6 @@ static void __init iq80332_timer_init(void)
 
 static struct sys_timer iq80332_timer = {
 	.init		= iq80332_timer_init,
-	.offset		= iop_gettimeoffset,
 };
 
 

arch/arm/mach-kirkwood/Kconfig

@@ -33,10 +33,18 @@ config MACH_SHEEVAPLUG
 	  Marvell SheevaPlug Reference Board.
 
 config MACH_TS219
-	bool "QNAP TS-119 and TS-219 Turbo NAS"
+	bool "QNAP TS-110, TS-119, TS-210, TS-219 and TS-219P Turbo NAS"
 	help
 	  Say 'Y' here if you want your kernel to support the
-	  QNAP TS-119 and TS-219 Turbo NAS devices.
+	  QNAP TS-110, TS-119, TS-210, TS-219 and TS-219P Turbo NAS
+	  devices.
+
+config MACH_TS41X
+	bool "QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS
+	  devices.
 
 config MACH_OPENRD_BASE
 	bool "Marvell OpenRD Base Board"

arch/arm/mach-kirkwood/Makefile

@@ -5,7 +5,8 @@ obj-$(CONFIG_MACH_RD88F6192_NAS)	+= rd88f6192-nas-setup.o
 obj-$(CONFIG_MACH_RD88F6281)		+= rd88f6281-setup.o
 obj-$(CONFIG_MACH_MV88F6281GTW_GE)	+= mv88f6281gtw_ge-setup.o
 obj-$(CONFIG_MACH_SHEEVAPLUG)		+= sheevaplug-setup.o
-obj-$(CONFIG_MACH_TS219)		+= ts219-setup.o
+obj-$(CONFIG_MACH_TS219)		+= ts219-setup.o tsx1x-common.o
+obj-$(CONFIG_MACH_TS41X)		+= ts41x-setup.o tsx1x-common.o
 obj-$(CONFIG_MACH_OPENRD_BASE)		+= openrd_base-setup.o
 
 obj-$(CONFIG_CPU_IDLE)			+= cpuidle.o

arch/arm/mach-kirkwood/ts219-setup.c

@@ -1,6 +1,6 @@
 /*
  *
- * QNAP TS-119/TS-219 Turbo NAS Board Setup
+ * QNAP TS-11x/TS-21x Turbo NAS Board Setup
  *
  * Copyright (C) 2009  Martin Michlmayr <tbm@cyrius.com>
  * Copyright (C) 2008  Byron Bradley <byron.bbradley@gmail.com>
@@ -14,87 +14,17 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/orion_spi.h>
 #include <linux/i2c.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/ata_platform.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
-#include <linux/timex.h>
-#include <linux/serial_reg.h>
-#include <linux/pci.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
 #include "common.h"
 #include "mpp.h"
-
+#include "tsx1x-common.h"
-/****************************************************************************
- * 16 MiB NOR flash. The struct mtd_partition is not in the same order as the
- *     partitions on the device because we want to keep compatability with
- *     the QNAP firmware.
- * Layout as used by QNAP:
- *  0x00000000-0x00080000 : "U-Boot"
- *  0x00200000-0x00400000 : "Kernel"
- *  0x00400000-0x00d00000 : "RootFS"
- *  0x00d00000-0x01000000 : "RootFS2"
- *  0x00080000-0x000c0000 : "U-Boot Config"
- *  0x000c0000-0x00200000 : "NAS Config"
- *
- * We'll use "RootFS1" instead of "RootFS" to stay compatible with the layout
- * used by the QNAP TS-109/TS-209.
- *
- ***************************************************************************/
-
-static struct mtd_partition qnap_ts219_partitions[] = {
-	{
-		.name		= "U-Boot",
-		.size		= 0x00080000,
-		.offset		= 0,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "Kernel",
-		.size		= 0x00200000,
-		.offset		= 0x00200000,
-	}, {
-		.name		= "RootFS1",
-		.size		= 0x00900000,
-		.offset		= 0x00400000,
-	}, {
-		.name		= "RootFS2",
-		.size		= 0x00300000,
-		.offset		= 0x00d00000,
-	}, {
-		.name		= "U-Boot Config",
-		.size		= 0x00040000,
-		.offset		= 0x00080000,
-	}, {
-		.name		= "NAS Config",
-		.size		= 0x00140000,
-		.offset		= 0x000c0000,
-	},
-};
-
-static const struct flash_platform_data qnap_ts219_flash = {
-	.type		= "m25p128",
-	.name		= "spi_flash",
-	.parts		= qnap_ts219_partitions,
-	.nr_parts	= ARRAY_SIZE(qnap_ts219_partitions),
-};
-
-static struct spi_board_info __initdata qnap_ts219_spi_slave_info[] = {
-	{
-		.modalias	= "m25p80",
-		.platform_data	= &qnap_ts219_flash,
-		.irq		= -1,
-		.max_speed_hz	= 20000000,
-		.bus_num	= 0,
-		.chip_select	= 0,
-	},
-};
 
 static struct i2c_board_info __initdata qnap_ts219_i2c_rtc = {
 	I2C_BOARD_INFO("s35390a", 0x30),
@@ -152,36 +82,10 @@ static unsigned int qnap_ts219_mpp_config[] __initdata = {
 	MPP14_UART1_RXD,	/* PIC controller */
 	MPP15_GPIO,		/* USB Copy button */
 	MPP16_GPIO,		/* Reset button */
+	MPP36_GPIO,		/* RAM: 0: 256 MB, 1: 512 MB */
 	0
 };
 
-
-/*****************************************************************************
- * QNAP TS-x19 specific power off method via UART1-attached PIC
- ****************************************************************************/
-
-#define UART1_REG(x)	(UART1_VIRT_BASE + ((UART_##x) << 2))
-
-void qnap_ts219_power_off(void)
-{
-	/* 19200 baud divisor */
-	const unsigned divisor = ((kirkwood_tclk + (8 * 19200)) / (16 * 19200));
-
-	pr_info("%s: triggering power-off...\n", __func__);
-
-	/* hijack UART1 and reset into sane state (19200,8n1) */
-	writel(0x83, UART1_REG(LCR));
-	writel(divisor & 0xff, UART1_REG(DLL));
-	writel((divisor >> 8) & 0xff, UART1_REG(DLM));
-	writel(0x03, UART1_REG(LCR));
-	writel(0x00, UART1_REG(IER));
-	writel(0x00, UART1_REG(FCR));
-	writel(0x00, UART1_REG(MCR));
-
-	/* send the power-off command 'A' to PIC */
-	writel('A', UART1_REG(TX));
-}
-
 static void __init qnap_ts219_init(void)
 {
 	/*
@@ -192,9 +96,7 @@ static void __init qnap_ts219_init(void)
 
 	kirkwood_uart0_init();
 	kirkwood_uart1_init(); /* A PIC controller is connected here. */
-	spi_register_board_info(qnap_ts219_spi_slave_info,
+	qnap_tsx1x_register_flash();
-				ARRAY_SIZE(qnap_ts219_spi_slave_info));
-	kirkwood_spi_init();
 	kirkwood_i2c_init();
 	i2c_register_board_info(0, &qnap_ts219_i2c_rtc, 1);
 	kirkwood_ge00_init(&qnap_ts219_ge00_data);
@@ -202,7 +104,7 @@ static void __init qnap_ts219_init(void)
 	kirkwood_ehci_init();
 	platform_device_register(&qnap_ts219_button_device);
 
-	pm_power_off = qnap_ts219_power_off;
+	pm_power_off = qnap_tsx1x_power_off;
 
 }
 

arch/arm/mach-kirkwood/ts41x-setup.c

@@ -0,0 +1,154 @@
+/*
+ *
+ * QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS Board Setup
+ *
+ * Copyright (C) 2009  Martin Michlmayr <tbm@cyrius.com>
+ * Copyright (C) 2008  Byron Bradley <byron.bbradley@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ata_platform.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+#include "tsx1x-common.h"
+
+static struct i2c_board_info __initdata qnap_ts41x_i2c_rtc = {
+	I2C_BOARD_INFO("s35390a", 0x30),
+};
+
+static struct mv643xx_eth_platform_data qnap_ts41x_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mv643xx_eth_platform_data qnap_ts41x_ge01_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
+};
+
+static struct mv_sata_platform_data qnap_ts41x_sata_data = {
+	.n_ports	= 2,
+};
+
+static struct gpio_keys_button qnap_ts41x_buttons[] = {
+	{
+		.code		= KEY_COPY,
+		.gpio		= 43,
+		.desc		= "USB Copy",
+		.active_low	= 1,
+	},
+	{
+		.code		= KEY_RESTART,
+		.gpio		= 37,
+		.desc		= "Reset",
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_platform_data qnap_ts41x_button_data = {
+	.buttons	= qnap_ts41x_buttons,
+	.nbuttons	= ARRAY_SIZE(qnap_ts41x_buttons),
+};
+
+static struct platform_device qnap_ts41x_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &qnap_ts41x_button_data,
+	}
+};
+
+static unsigned int qnap_ts41x_mpp_config[] __initdata = {
+	MPP0_SPI_SCn,
+	MPP1_SPI_MOSI,
+	MPP2_SPI_SCK,
+	MPP3_SPI_MISO,
+	MPP6_SYSRST_OUTn,
+	MPP7_PEX_RST_OUTn,
+	MPP8_TW_SDA,
+	MPP9_TW_SCK,
+	MPP10_UART0_TXD,
+	MPP11_UART0_RXD,
+	MPP13_UART1_TXD,	/* PIC controller */
+	MPP14_UART1_RXD,	/* PIC controller */
+	MPP15_SATA0_ACTn,
+	MPP16_SATA1_ACTn,
+	MPP20_GE1_0,
+	MPP21_GE1_1,
+	MPP22_GE1_2,
+	MPP23_GE1_3,
+	MPP24_GE1_4,
+	MPP25_GE1_5,
+	MPP26_GE1_6,
+	MPP27_GE1_7,
+	MPP30_GE1_10,
+	MPP31_GE1_11,
+	MPP32_GE1_12,
+	MPP33_GE1_13,
+	MPP36_GPIO,		/* RAM: 0: 256 MB, 1: 512 MB */
+	MPP37_GPIO,		/* Reset button */
+	MPP43_GPIO,		/* USB Copy button */
+	MPP44_GPIO,		/* Board ID: 0: TS-419U, 1: TS-419 */
+	MPP45_GPIO,		/* JP1: 0: console, 1: LCD */
+	MPP46_GPIO,		/* External SATA HDD1 error indicator */
+	MPP47_GPIO,		/* External SATA HDD2 error indicator */
+	MPP48_GPIO,		/* External SATA HDD3 error indicator */
+	MPP49_GPIO,		/* External SATA HDD4 error indicator */
+	0
+};
+
+static void __init qnap_ts41x_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+	kirkwood_mpp_conf(qnap_ts41x_mpp_config);
+
+	kirkwood_uart0_init();
+	kirkwood_uart1_init(); /* A PIC controller is connected here. */
+	qnap_tsx1x_register_flash();
+	kirkwood_i2c_init();
+	i2c_register_board_info(0, &qnap_ts41x_i2c_rtc, 1);
+	kirkwood_ge00_init(&qnap_ts41x_ge00_data);
+	kirkwood_ge01_init(&qnap_ts41x_ge01_data);
+	kirkwood_sata_init(&qnap_ts41x_sata_data);
+	kirkwood_ehci_init();
+	platform_device_register(&qnap_ts41x_button_device);
+
+	pm_power_off = qnap_tsx1x_power_off;
+
+}
+
+static int __init ts41x_pci_init(void)
+{
+	if (machine_is_ts41x())
+		kirkwood_pcie_init();
+
+   return 0;
+}
+subsys_initcall(ts41x_pci_init);
+
+MACHINE_START(TS41X, "QNAP TS-41x")
+	/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
+	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
+	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.init_machine	= qnap_ts41x_init,
+	.map_io		= kirkwood_map_io,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &kirkwood_timer,
+MACHINE_END

arch/arm/mach-kirkwood/tsx1x-common.c

@@ -0,0 +1,113 @@
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/orion_spi.h>
+#include <linux/serial_reg.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+
+/*
+ * QNAP TS-x1x Boards flash
+ */
+
+/****************************************************************************
+ * 16 MiB NOR flash. The struct mtd_partition is not in the same order as the
+ *     partitions on the device because we want to keep compatability with
+ *     the QNAP firmware.
+ * Layout as used by QNAP:
+ *  0x00000000-0x00080000 : "U-Boot"
+ *  0x00200000-0x00400000 : "Kernel"
+ *  0x00400000-0x00d00000 : "RootFS"
+ *  0x00d00000-0x01000000 : "RootFS2"
+ *  0x00080000-0x000c0000 : "U-Boot Config"
+ *  0x000c0000-0x00200000 : "NAS Config"
+ *
+ * We'll use "RootFS1" instead of "RootFS" to stay compatible with the layout
+ * used by the QNAP TS-109/TS-209.
+ *
+ ***************************************************************************/
+
+struct mtd_partition qnap_tsx1x_partitions[] = {
+	{
+		.name		= "U-Boot",
+		.size		= 0x00080000,
+		.offset		= 0,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "Kernel",
+		.size		= 0x00200000,
+		.offset		= 0x00200000,
+	}, {
+		.name		= "RootFS1",
+		.size		= 0x00900000,
+		.offset		= 0x00400000,
+	}, {
+		.name		= "RootFS2",
+		.size		= 0x00300000,
+		.offset		= 0x00d00000,
+	}, {
+		.name		= "U-Boot Config",
+		.size		= 0x00040000,
+		.offset		= 0x00080000,
+	}, {
+		.name		= "NAS Config",
+		.size		= 0x00140000,
+		.offset		= 0x000c0000,
+	},
+};
+
+const struct flash_platform_data qnap_tsx1x_flash = {
+	.type		= "m25p128",
+	.name		= "spi_flash",
+	.parts		= qnap_tsx1x_partitions,
+	.nr_parts	= ARRAY_SIZE(qnap_tsx1x_partitions),
+};
+
+struct spi_board_info __initdata qnap_tsx1x_spi_slave_info[] = {
+	{
+		.modalias	= "m25p80",
+		.platform_data	= &qnap_tsx1x_flash,
+		.irq		= -1,
+		.max_speed_hz	= 20000000,
+		.bus_num	= 0,
+		.chip_select	= 0,
+	},
+};
+
+void qnap_tsx1x_register_flash(void)
+{
+	spi_register_board_info(qnap_tsx1x_spi_slave_info,
+				ARRAY_SIZE(qnap_tsx1x_spi_slave_info));
+	kirkwood_spi_init();
+}
+
+
+/*****************************************************************************
+ * QNAP TS-x1x specific power off method via UART1-attached PIC
+ ****************************************************************************/
+
+#define UART1_REG(x)	(UART1_VIRT_BASE + ((UART_##x) << 2))
+
+void qnap_tsx1x_power_off(void)
+{
+	/* 19200 baud divisor */
+	const unsigned divisor = ((kirkwood_tclk + (8 * 19200)) / (16 * 19200));
+
+	pr_info("%s: triggering power-off...\n", __func__);
+
+	/* hijack UART1 and reset into sane state (19200,8n1) */
+	writel(0x83, UART1_REG(LCR));
+	writel(divisor & 0xff, UART1_REG(DLL));
+	writel((divisor >> 8) & 0xff, UART1_REG(DLM));
+	writel(0x03, UART1_REG(LCR));
+	writel(0x00, UART1_REG(IER));
+	writel(0x00, UART1_REG(FCR));
+	writel(0x00, UART1_REG(MCR));
+
+	/* send the power-off command 'A' to PIC */
+	writel('A', UART1_REG(TX));
+}
+

arch/arm/mach-kirkwood/tsx1x-common.h

@@ -0,0 +1,7 @@
+#ifndef __ARCH_KIRKWOOD_TSX1X_COMMON_H
+#define __ARCH_KIRKWOOD_TSX1X_COMMON_H
+
+extern void qnap_tsx1x_register_flash(void);
+extern void qnap_tsx1x_power_off(void);
+
+#endif

arch/arm/mach-mmp/aspenite.c

@@ -13,6 +13,9 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/smc91x.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -85,12 +88,48 @@ static struct platform_device smc91x_device = {
 	.resource	= smc91x_resources,
 };
 
+static struct mtd_partition aspenite_nand_partitions[] = {
+	{
+		.name		= "bootloader",
+		.offset		= 0,
+		.size		= SZ_1M,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "reserved",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_128K,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "reserved",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_8M,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= (SZ_2M + SZ_1M),
+		.mask_flags	= 0,
+	}, {
+		.name		= "filesystem",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_48M,
+		.mask_flags	= 0,
+	}
+};
+
+static struct pxa3xx_nand_platform_data aspenite_nand_info = {
+	.enable_arbiter	= 1,
+	.parts		= aspenite_nand_partitions,
+	.nr_parts	= ARRAY_SIZE(aspenite_nand_partitions),
+};
+
 static void __init common_init(void)
 {
 	mfp_config(ARRAY_AND_SIZE(common_pin_config));
 
 	/* on-chip devices */
 	pxa168_add_uart(1);
+	pxa168_add_nand(&aspenite_nand_info);
 
 	/* off-chip devices */
 	platform_device_register(&smc91x_device);

arch/arm/mach-mmp/clock.c

@@ -34,6 +34,21 @@ struct clkops apbc_clk_ops = {
 	.disable	= apbc_clk_disable,
 };
 
+static void apmu_clk_enable(struct clk *clk)
+{
+	__raw_writel(clk->enable_val, clk->clk_rst);
+}
+
+static void apmu_clk_disable(struct clk *clk)
+{
+	__raw_writel(0, clk->clk_rst);
+}
+
+struct clkops apmu_clk_ops = {
+	.enable		= apmu_clk_enable,
+	.disable	= apmu_clk_disable,
+};
+
 static DEFINE_SPINLOCK(clocks_lock);
 
 int clk_enable(struct clk *clk)

arch/arm/mach-mmp/clock.h

@@ -25,6 +25,7 @@ struct clk {
 };
 
 extern struct clkops apbc_clk_ops;
+extern struct clkops apmu_clk_ops;
 
 #define APBC_CLK(_name, _reg, _fnclksel, _rate)			\
 struct clk clk_##_name = {					\

arch/arm/mach-mmp/include/mach/irqs.h

@@ -31,7 +31,9 @@
 #define IRQ_PXA168_DDR_INT		26
 #define IRQ_PXA168_UART1		27
 #define IRQ_PXA168_UART2		28
+#define IRQ_PXA168_UART3		29
 #define IRQ_PXA168_WDT			35
+#define IRQ_PXA168_MAIN_PMU		36
 #define IRQ_PXA168_FRQ_CHANGE		38
 #define IRQ_PXA168_SDH1			39
 #define IRQ_PXA168_SDH2			40
@@ -46,7 +48,7 @@
 #define IRQ_PXA168_USB2			51
 #define IRQ_PXA168_AC97			57
 #define IRQ_PXA168_TWSI1		58
-#define IRQ_PXA168_PMU			60
+#define IRQ_PXA168_AP_PMU		60
 #define IRQ_PXA168_SM_INT		63
 
 /*

arch/arm/mach-mmp/include/mach/pxa168.h

@@ -4,6 +4,7 @@
 #include <linux/i2c.h>
 #include <mach/devices.h>
 #include <plat/i2c.h>
+#include <plat/pxa3xx_nand.h>
 
 extern struct pxa_device_desc pxa168_device_uart1;
 extern struct pxa_device_desc pxa168_device_uart2;
@@ -13,6 +14,7 @@ extern struct pxa_device_desc pxa168_device_pwm1;
 extern struct pxa_device_desc pxa168_device_pwm2;
 extern struct pxa_device_desc pxa168_device_pwm3;
 extern struct pxa_device_desc pxa168_device_pwm4;
+extern struct pxa_device_desc pxa168_device_nand;
 
 static inline int pxa168_add_uart(int id)
 {
@@ -64,4 +66,9 @@ static inline int pxa168_add_pwm(int id)
 
 	return pxa_register_device(d, NULL, 0);
 }
+
+static inline int pxa168_add_nand(struct pxa3xx_nand_platform_data *info)
+{
+	return pxa_register_device(&pxa168_device_nand, info, sizeof(*info));
+}
 #endif /* __ASM_MACH_PXA168_H */

arch/arm/mach-mmp/include/mach/pxa910.h

@@ -4,6 +4,7 @@
 #include <linux/i2c.h>
 #include <mach/devices.h>
 #include <plat/i2c.h>
+#include <plat/pxa3xx_nand.h>
 
 extern struct pxa_device_desc pxa910_device_uart1;
 extern struct pxa_device_desc pxa910_device_uart2;
@@ -13,6 +14,7 @@ extern struct pxa_device_desc pxa910_device_pwm1;
 extern struct pxa_device_desc pxa910_device_pwm2;
 extern struct pxa_device_desc pxa910_device_pwm3;
 extern struct pxa_device_desc pxa910_device_pwm4;
+extern struct pxa_device_desc pxa910_device_nand;
 
 static inline int pxa910_add_uart(int id)
 {
@@ -64,4 +66,9 @@ static inline int pxa910_add_pwm(int id)
 
 	return pxa_register_device(d, NULL, 0);
 }
+
+static inline int pxa910_add_nand(struct pxa3xx_nand_platform_data *info)
+{
+	return pxa_register_device(&pxa910_device_nand, info, sizeof(*info));
+}
 #endif /* __ASM_MACH_PXA910_H */

arch/arm/mach-mmp/pxa168.c

@@ -19,6 +19,7 @@
 #include <mach/addr-map.h>
 #include <mach/cputype.h>
 #include <mach/regs-apbc.h>
+#include <mach/regs-apmu.h>
 #include <mach/irqs.h>
 #include <mach/gpio.h>
 #include <mach/dma.h>
@@ -72,6 +73,8 @@ static APBC_CLK(pwm2, PXA168_PWM2, 1, 13000000);
 static APBC_CLK(pwm3, PXA168_PWM3, 1, 13000000);
 static APBC_CLK(pwm4, PXA168_PWM4, 1, 13000000);
 
+static APMU_CLK(nand, NAND, 0x01db, 208000000);
+
 /* device and clock bindings */
 static struct clk_lookup pxa168_clkregs[] = {
 	INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
@@ -82,6 +85,7 @@ static struct clk_lookup pxa168_clkregs[] = {
 	INIT_CLKREG(&clk_pwm2, "pxa168-pwm.1", NULL),
 	INIT_CLKREG(&clk_pwm3, "pxa168-pwm.2", NULL),
 	INIT_CLKREG(&clk_pwm4, "pxa168-pwm.3", NULL),
+	INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
 };
 
 static int __init pxa168_init(void)
@@ -127,3 +131,4 @@ PXA168_DEVICE(pwm1, "pxa168-pwm", 0, NONE, 0xd401a000, 0x10);
 PXA168_DEVICE(pwm2, "pxa168-pwm", 1, NONE, 0xd401a400, 0x10);
 PXA168_DEVICE(pwm3, "pxa168-pwm", 2, NONE, 0xd401a800, 0x10);
 PXA168_DEVICE(pwm4, "pxa168-pwm", 3, NONE, 0xd401ac00, 0x10);
+PXA168_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x80, 97, 99);

arch/arm/mach-mmp/pxa910.c

@@ -110,6 +110,8 @@ static APBC_CLK(pwm2, PXA910_PWM2, 1, 13000000);
 static APBC_CLK(pwm3, PXA910_PWM3, 1, 13000000);
 static APBC_CLK(pwm4, PXA910_PWM4, 1, 13000000);
 
+static APMU_CLK(nand, NAND, 0x01db, 208000000);
+
 /* device and clock bindings */
 static struct clk_lookup pxa910_clkregs[] = {
 	INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
@@ -120,6 +122,7 @@ static struct clk_lookup pxa910_clkregs[] = {
 	INIT_CLKREG(&clk_pwm2, "pxa910-pwm.1", NULL),
 	INIT_CLKREG(&clk_pwm3, "pxa910-pwm.2", NULL),
 	INIT_CLKREG(&clk_pwm4, "pxa910-pwm.3", NULL),
+	INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
 };
 
 static int __init pxa910_init(void)
@@ -174,3 +177,4 @@ PXA910_DEVICE(pwm1, "pxa910-pwm", 0, NONE, 0xd401a000, 0x10);
 PXA910_DEVICE(pwm2, "pxa910-pwm", 1, NONE, 0xd401a400, 0x10);
 PXA910_DEVICE(pwm3, "pxa910-pwm", 2, NONE, 0xd401a800, 0x10);
 PXA910_DEVICE(pwm4, "pxa910-pwm", 3, NONE, 0xd401ac00, 0x10);
+PXA910_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x80, 97, 99);

arch/arm/mach-mmp/ttc_dkb.c

@@ -11,9 +11,13 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/onenand.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
 #include <mach/addr-map.h>
 #include <mach/mfp-pxa910.h>
 #include <mach/pxa910.h>
@@ -26,6 +30,86 @@ static unsigned long ttc_dkb_pin_config[] __initdata = {
 	/* UART2 */
 	GPIO47_UART2_RXD,
 	GPIO48_UART2_TXD,
+
+	/* DFI */
+	DF_IO0_ND_IO0,
+	DF_IO1_ND_IO1,
+	DF_IO2_ND_IO2,
+	DF_IO3_ND_IO3,
+	DF_IO4_ND_IO4,
+	DF_IO5_ND_IO5,
+	DF_IO6_ND_IO6,
+	DF_IO7_ND_IO7,
+	DF_IO8_ND_IO8,
+	DF_IO9_ND_IO9,
+	DF_IO10_ND_IO10,
+	DF_IO11_ND_IO11,
+	DF_IO12_ND_IO12,
+	DF_IO13_ND_IO13,
+	DF_IO14_ND_IO14,
+	DF_IO15_ND_IO15,
+	DF_nCS0_SM_nCS2_nCS0,
+	DF_ALE_SM_WEn_ND_ALE,
+	DF_CLE_SM_OEn_ND_CLE,
+	DF_WEn_DF_WEn,
+	DF_REn_DF_REn,
+	DF_RDY0_DF_RDY0,
+};
+
+static struct mtd_partition ttc_dkb_onenand_partitions[] = {
+	{
+		.name		= "bootloader",
+		.offset		= 0,
+		.size		= SZ_1M,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "reserved",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_128K,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "reserved",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_8M,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= (SZ_2M + SZ_1M),
+		.mask_flags	= 0,
+	}, {
+		.name		= "filesystem",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_48M,
+		.mask_flags	= 0,
+	}
+};
+
+static struct onenand_platform_data ttc_dkb_onenand_info = {
+	.parts		= ttc_dkb_onenand_partitions,
+	.nr_parts	= ARRAY_SIZE(ttc_dkb_onenand_partitions),
+};
+
+static struct resource ttc_dkb_resource_onenand[] = {
+	[0] = {
+		.start	= SMC_CS0_PHYS_BASE,
+		.end	= SMC_CS0_PHYS_BASE + SZ_1M,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device ttc_dkb_device_onenand = {
+	.name		= "onenand-flash",
+	.id		= -1,
+	.resource	= ttc_dkb_resource_onenand,
+	.num_resources	= ARRAY_SIZE(ttc_dkb_resource_onenand),
+	.dev		= {
+		.platform_data	= &ttc_dkb_onenand_info,
+	},
+};
+
+static struct platform_device *ttc_dkb_devices[] = {
+	&ttc_dkb_device_onenand,
 };
 
 static void __init ttc_dkb_init(void)
@@ -34,6 +118,9 @@ static void __init ttc_dkb_init(void)
 
 	/* on-chip devices */
 	pxa910_add_uart(1);
+
+	/* off-chip devices */
+	platform_add_devices(ARRAY_AND_SIZE(ttc_dkb_devices));
 }
 
 MACHINE_START(TTC_DKB, "PXA910-based TTC_DKB Development Platform")

arch/arm/mach-mx2/Kconfig

@@ -6,11 +6,13 @@ choice
 
 config MACH_MX21
 	bool "i.MX21 support"
+	select ARCH_MXC_AUDMUX_V1
 	help
 	  This enables support for Freescale's MX2 based i.MX21 processor.
 
 config MACH_MX27
 	bool "i.MX27 support"
+	select ARCH_MXC_AUDMUX_V1
 	help
 	  This enables support for Freescale's MX2 based i.MX27 processor.
 
@@ -102,4 +104,11 @@ config MACH_PCA100
 	  Include support for phyCARD-s (aka pca100) platform. This
 	  includes specific configurations for the module and its peripherals.
 
+config MACH_MXT_TD60
+	bool "Maxtrack i-MXT TD60"
+	depends on MACH_MX27
+	help
+	  Include support for i-MXT (aka td60) platform. This
+	  includes specific configurations for the module and its peripherals.
+
 endif

arch/arm/mach-mx2/Makefile

@@ -20,4 +20,5 @@ obj-$(CONFIG_MACH_MX27LITE) += mx27lite.o
 obj-$(CONFIG_MACH_EUKREA_CPUIMX27) += eukrea_cpuimx27.o
 obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o
 obj-$(CONFIG_MACH_PCA100) += pca100.o
+obj-$(CONFIG_MACH_MXT_TD60) += mxt_td60.o
 

arch/arm/mach-mx2/clock_imx21.c

@@ -1000,7 +1000,7 @@ int __init mx21_clocks_init(unsigned long lref, unsigned long href)
 	clk_enable(&per_clk[0]);
 	clk_enable(&gpio_clk);
 
-#ifdef CONFIG_DEBUG_LL_CONSOLE
+#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
 	clk_enable(&uart_clk[0]);
 #endif
 

arch/arm/mach-mx2/clock_imx27.c

@@ -651,8 +651,8 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", usb_clk1)
 	_REGISTER_CLOCK("mxc-ehci.2", "usb", usb_clk)
 	_REGISTER_CLOCK("mxc-ehci.2", "usb_ahb", usb_clk1)
-	_REGISTER_CLOCK(NULL, "ssi1", ssi1_clk)
+	_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
-	_REGISTER_CLOCK(NULL, "ssi2", ssi2_clk)
+	_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
 	_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
 	_REGISTER_CLOCK(NULL, "vpu", vpu_clk)
 	_REGISTER_CLOCK(NULL, "dma", dma_clk)
@@ -751,7 +751,7 @@ int __init mx27_clocks_init(unsigned long fref)
 	clk_enable(&emi_clk);
 	clk_enable(&iim_clk);
 
-#ifdef CONFIG_DEBUG_LL_CONSOLE
+#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
 	clk_enable(&uart1_clk);
 #endif
 

arch/arm/mach-mx2/devices.c

@@ -530,6 +530,84 @@ struct platform_device mxc_usbh2 = {
 };
 #endif
 
+static struct resource imx_ssi_resources0[] = {
+	{
+		.start	= SSI1_BASE_ADDR,
+		.end	= SSI1_BASE_ADDR + 0x6F,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= MXC_INT_SSI1,
+		.end	= MXC_INT_SSI1,
+		.flags	= IORESOURCE_IRQ,
+	}, {
+		.name	= "tx0",
+		.start	= DMA_REQ_SSI1_TX0,
+		.end	= DMA_REQ_SSI1_TX0,
+		.flags	= IORESOURCE_DMA,
+	}, {
+		.name	= "rx0",
+		.start	= DMA_REQ_SSI1_RX0,
+		.end	= DMA_REQ_SSI1_RX0,
+		.flags	= IORESOURCE_DMA,
+	}, {
+		.name	= "tx1",
+		.start	= DMA_REQ_SSI1_TX1,
+		.end	= DMA_REQ_SSI1_TX1,
+		.flags	= IORESOURCE_DMA,
+	}, {
+		.name	= "rx1",
+		.start	= DMA_REQ_SSI1_RX1,
+		.end	= DMA_REQ_SSI1_RX1,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct resource imx_ssi_resources1[] = {
+	{
+		.start	= SSI2_BASE_ADDR,
+		.end	= SSI2_BASE_ADDR + 0x6F,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= MXC_INT_SSI2,
+		.end	= MXC_INT_SSI2,
+		.flags	= IORESOURCE_IRQ,
+	}, {
+		.name	= "tx0",
+		.start	= DMA_REQ_SSI2_TX0,
+		.end	= DMA_REQ_SSI2_TX0,
+		.flags	= IORESOURCE_DMA,
+	}, {
+		.name	= "rx0",
+		.start	= DMA_REQ_SSI2_RX0,
+		.end	= DMA_REQ_SSI2_RX0,
+		.flags	= IORESOURCE_DMA,
+	}, {
+		.name	= "tx1",
+		.start	= DMA_REQ_SSI2_TX1,
+		.end	= DMA_REQ_SSI2_TX1,
+		.flags	= IORESOURCE_DMA,
+	}, {
+		.name	= "rx1",
+		.start	= DMA_REQ_SSI2_RX1,
+		.end	= DMA_REQ_SSI2_RX1,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+struct platform_device imx_ssi_device0 = {
+	.name = "imx-ssi",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(imx_ssi_resources0),
+	.resource = imx_ssi_resources0,
+};
+
+struct platform_device imx_ssi_device1 = {
+	.name = "imx-ssi",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(imx_ssi_resources1),
+	.resource = imx_ssi_resources1,
+};
+
 /* GPIO port description */
 static struct mxc_gpio_port imx_gpio_ports[] = {
 	{

arch/arm/mach-mx2/devices.h

@@ -26,4 +26,5 @@ extern struct platform_device mxc_usbh2;
 extern struct platform_device mxc_spi_device0;
 extern struct platform_device mxc_spi_device1;
 extern struct platform_device mxc_spi_device2;
-
+extern struct platform_device imx_ssi_device0;
+extern struct platform_device imx_ssi_device1;

arch/arm/mach-mx2/mxt_td60.c

@@ -0,0 +1,319 @@
+/*
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *  Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <linux/gpio.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux.h>
+#include <mach/mxc_nand.h>
+#include <mach/i2c.h>
+#include <linux/i2c/pca953x.h>
+#include <mach/imxfb.h>
+#include <mach/mmc.h>
+
+#include "devices.h"
+
+static unsigned int mxt_td60_pins[] __initdata = {
+	/* UART0 */
+	PE12_PF_UART1_TXD,
+	PE13_PF_UART1_RXD,
+	PE14_PF_UART1_CTS,
+	PE15_PF_UART1_RTS,
+	/* UART1 */
+	PE3_PF_UART2_CTS,
+	PE4_PF_UART2_RTS,
+	PE6_PF_UART2_TXD,
+	PE7_PF_UART2_RXD,
+	/* UART2 */
+	PE8_PF_UART3_TXD,
+	PE9_PF_UART3_RXD,
+	PE10_PF_UART3_CTS,
+	PE11_PF_UART3_RTS,
+	/* UART3 */
+	PB26_AF_UART4_RTS,
+	PB28_AF_UART4_TXD,
+	PB29_AF_UART4_CTS,
+	PB31_AF_UART4_RXD,
+	/* UART4 */
+	PB18_AF_UART5_TXD,
+	PB19_AF_UART5_RXD,
+	PB20_AF_UART5_CTS,
+	PB21_AF_UART5_RTS,
+	/* UART5 */
+	PB10_AF_UART6_TXD,
+	PB12_AF_UART6_CTS,
+	PB11_AF_UART6_RXD,
+	PB13_AF_UART6_RTS,
+	/* FEC */
+	PD0_AIN_FEC_TXD0,
+	PD1_AIN_FEC_TXD1,
+	PD2_AIN_FEC_TXD2,
+	PD3_AIN_FEC_TXD3,
+	PD4_AOUT_FEC_RX_ER,
+	PD5_AOUT_FEC_RXD1,
+	PD6_AOUT_FEC_RXD2,
+	PD7_AOUT_FEC_RXD3,
+	PD8_AF_FEC_MDIO,
+	PD9_AIN_FEC_MDC,
+	PD10_AOUT_FEC_CRS,
+	PD11_AOUT_FEC_TX_CLK,
+	PD12_AOUT_FEC_RXD0,
+	PD13_AOUT_FEC_RX_DV,
+	PD14_AOUT_FEC_RX_CLK,
+	PD15_AOUT_FEC_COL,
+	PD16_AIN_FEC_TX_ER,
+	PF23_AIN_FEC_TX_EN,
+	/* I2C1 */
+	PD17_PF_I2C_DATA,
+	PD18_PF_I2C_CLK,
+	/* I2C2 */
+	PC5_PF_I2C2_SDA,
+	PC6_PF_I2C2_SCL,
+	/* FB */
+	PA5_PF_LSCLK,
+	PA6_PF_LD0,
+	PA7_PF_LD1,
+	PA8_PF_LD2,
+	PA9_PF_LD3,
+	PA10_PF_LD4,
+	PA11_PF_LD5,
+	PA12_PF_LD6,
+	PA13_PF_LD7,
+	PA14_PF_LD8,
+	PA15_PF_LD9,
+	PA16_PF_LD10,
+	PA17_PF_LD11,
+	PA18_PF_LD12,
+	PA19_PF_LD13,
+	PA20_PF_LD14,
+	PA21_PF_LD15,
+	PA22_PF_LD16,
+	PA23_PF_LD17,
+	PA25_PF_CLS,
+	PA27_PF_SPL_SPR,
+	PA28_PF_HSYNC,
+	PA29_PF_VSYNC,
+	PA30_PF_CONTRAST,
+	PA31_PF_OE_ACD,
+	/* OWIRE */
+	PE16_AF_OWIRE,
+	/* SDHC1*/
+	PE18_PF_SD1_D0,
+	PE19_PF_SD1_D1,
+	PE20_PF_SD1_D2,
+	PE21_PF_SD1_D3,
+	PE22_PF_SD1_CMD,
+	PE23_PF_SD1_CLK,
+	PF8_AF_ATA_IORDY,
+	/* SDHC2*/
+	PB4_PF_SD2_D0,
+	PB5_PF_SD2_D1,
+	PB6_PF_SD2_D2,
+	PB7_PF_SD2_D3,
+	PB8_PF_SD2_CMD,
+	PB9_PF_SD2_CLK,
+};
+
+static struct mxc_nand_platform_data mxt_td60_nand_board_info = {
+	.width = 1,
+	.hw_ecc = 1,
+};
+
+static struct imxi2c_platform_data mxt_td60_i2c_data = {
+	.bitrate = 100000,
+};
+
+/* PCA9557 */
+static int mxt_td60_pca9557_setup(struct i2c_client *client,
+				unsigned gpio_base, unsigned ngpio,
+				void *context)
+{
+	static int mxt_td60_gpio_value[] = {
+		-1, -1, -1, -1, -1, -1, -1, 1
+	};
+	int n;
+
+	for (n = 0; n < ARRAY_SIZE(mxt_td60_gpio_value); ++n) {
+		gpio_request(gpio_base + n, "MXT_TD60 GPIO Exp");
+		if (mxt_td60_gpio_value[n] < 0)
+			gpio_direction_input(gpio_base + n);
+		else
+			gpio_direction_output(gpio_base + n,
+						mxt_td60_gpio_value[n]);
+		gpio_export(gpio_base + n, 0);
+	}
+
+	return 0;
+}
+
+static struct pca953x_platform_data mxt_td60_pca9557_pdata = {
+	.gpio_base	= 240, /* place PCA9557 after all MX27 gpio pins */
+	.invert		= 0, /* Do not invert */
+	.setup		= mxt_td60_pca9557_setup,
+};
+
+static struct i2c_board_info mxt_td60_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("pca9557", 0x18),
+		.platform_data = &mxt_td60_pca9557_pdata,
+	},
+};
+
+static struct imxi2c_platform_data mxt_td60_i2c2_data = {
+	.bitrate = 100000,
+};
+
+static struct i2c_board_info mxt_td60_i2c2_devices[] = {
+};
+
+static struct imx_fb_videomode mxt_td60_modes[] = {
+	{
+		.mode = {
+			.name		= "Chimei LW700AT9003",
+			.refresh	= 60,
+			.xres		= 800,
+			.yres		= 480,
+			.pixclock	= 30303,
+			.hsync_len	= 64,
+			.left_margin	= 0x67,
+			.right_margin	= 0x68,
+			.vsync_len	= 16,
+			.upper_margin	= 0x0f,
+			.lower_margin	= 0x0f,
+		},
+		.bpp		= 16,
+		.pcr		= 0xFA208B83,
+	},
+};
+
+static struct imx_fb_platform_data mxt_td60_fb_data = {
+	.mode = mxt_td60_modes,
+	.num_modes = ARRAY_SIZE(mxt_td60_modes),
+
+	/*
+	 * - HSYNC active high
+	 * - VSYNC active high
+	 * - clk notenabled while idle
+	 * - clock inverted
+	 * - data not inverted
+	 * - data enable low active
+	 * - enable sharp mode
+	 */
+	.pwmr		= 0x00A903FF,
+	.lscr1		= 0x00120300,
+	.dmacr		= 0x00020010,
+};
+
+static int mxt_td60_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
+				void *data)
+{
+	return request_irq(IRQ_GPIOF(8), detect_irq, IRQF_TRIGGER_FALLING,
+				"sdhc1-card-detect", data);
+}
+
+static void mxt_td60_sdhc1_exit(struct device *dev, void *data)
+{
+	free_irq(IRQ_GPIOF(8), data);
+}
+
+static struct imxmmc_platform_data sdhc1_pdata = {
+	.init = mxt_td60_sdhc1_init,
+	.exit = mxt_td60_sdhc1_exit,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+	&mxc_fec_device,
+};
+
+static struct imxuart_platform_data uart_pdata[] = {
+	{
+		.flags = IMXUART_HAVE_RTSCTS,
+	}, {
+		.flags = IMXUART_HAVE_RTSCTS,
+	}, {
+		.flags = IMXUART_HAVE_RTSCTS,
+	}, {
+		.flags = IMXUART_HAVE_RTSCTS,
+	}, {
+		.flags = IMXUART_HAVE_RTSCTS,
+	}, {
+		.flags = IMXUART_HAVE_RTSCTS,
+	},
+};
+
+static void __init mxt_td60_board_init(void)
+{
+	mxc_gpio_setup_multiple_pins(mxt_td60_pins, ARRAY_SIZE(mxt_td60_pins),
+			"MXT_TD60");
+
+	mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
+	mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
+	mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
+	mxc_register_device(&mxc_uart_device3, &uart_pdata[3]);
+	mxc_register_device(&mxc_uart_device4, &uart_pdata[4]);
+	mxc_register_device(&mxc_uart_device5, &uart_pdata[5]);
+	mxc_register_device(&mxc_nand_device, &mxt_td60_nand_board_info);
+
+	i2c_register_board_info(0, mxt_td60_i2c_devices,
+				ARRAY_SIZE(mxt_td60_i2c_devices));
+
+	i2c_register_board_info(1, mxt_td60_i2c2_devices,
+				ARRAY_SIZE(mxt_td60_i2c2_devices));
+
+	mxc_register_device(&mxc_i2c_device0, &mxt_td60_i2c_data);
+	mxc_register_device(&mxc_i2c_device1, &mxt_td60_i2c2_data);
+	mxc_register_device(&mxc_fb_device, &mxt_td60_fb_data);
+	mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata);
+
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init mxt_td60_timer_init(void)
+{
+	mx27_clocks_init(26000000);
+}
+
+static struct sys_timer mxt_td60_timer = {
+	.init	= mxt_td60_timer_init,
+};
+
+MACHINE_START(MXT_TD60, "Maxtrack i-MXT TD60")
+	/* maintainer: Maxtrack Industrial */
+	.phys_io	= AIPI_BASE_ADDR,
+	.io_pg_offst	= ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params	= PHYS_OFFSET + 0x100,
+	.map_io		= mx27_map_io,
+	.init_irq	= mx27_init_irq,
+	.init_machine	= mxt_td60_board_init,
+	.timer		= &mxt_td60_timer,
+MACHINE_END
+

arch/arm/mach-mx2/pca100.c

@@ -237,7 +237,7 @@ MACHINE_START(PCA100, "phyCARD-i.MX27")
 	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx27_map_io,
-	.init_irq       = mxc_init_irq,
+	.init_irq       = mx27_init_irq,
 	.init_machine   = pca100_init,
 	.timer          = &pca100_timer,
 MACHINE_END

arch/arm/mach-mx3/Kconfig

@@ -2,11 +2,13 @@ if ARCH_MX3
 
 config ARCH_MX31
 	select ARCH_HAS_RNGA
+	select ARCH_MXC_AUDMUX_V2
 	bool
 
 config ARCH_MX35
 	bool
 	select ARCH_MXC_IOMUX_V3
+	select ARCH_MXC_AUDMUX_V2
 
 comment "MX3 platforms:"
 
@@ -61,6 +63,7 @@ config MACH_MX31_3DS
 config MACH_MX31MOBOARD
 	bool "Support mx31moboard platforms (EPFL Mobots group)"
 	select ARCH_MX31
+	select MXC_ULPI
 	help
 	  Include support for mx31moboard platform. This includes specific
 	  configurations for the board and its peripherals.
@@ -100,4 +103,12 @@ config MACH_MX35_3DS
 	help
 	  Include support for MX35PDK platform. This includes specific
 	  configurations for the board and its peripherals.
+
+config MACH_KZM_ARM11_01
+	bool "Support KZM-ARM11-01(Kyoto Microcomputer)"
+	select ARCH_MX31
+	help
+	  Include support for KZM-ARM11-01. This includes specific
+	  configurations for the board and its peripherals.
+
 endif

arch/arm/mach-mx3/Makefile

@@ -4,12 +4,12 @@
 
 # Object file lists.
 
-obj-y				:= mm.o devices.o
+obj-y				:= mm.o devices.o cpu.o
 obj-$(CONFIG_ARCH_MX31)		+= clock.o iomux.o
 obj-$(CONFIG_ARCH_MX35)		+= clock-imx35.o
 obj-$(CONFIG_MACH_MX31ADS)	+= mx31ads.o
 obj-$(CONFIG_MACH_MX31LILLY)	+= mx31lilly.o mx31lilly-db.o
-obj-$(CONFIG_MACH_MX31LITE)	+= mx31lite.o
+obj-$(CONFIG_MACH_MX31LITE)	+= mx31lite.o mx31lite-db.o
 obj-$(CONFIG_MACH_PCM037)	+= pcm037.o
 obj-$(CONFIG_MACH_PCM037_EET)	+= pcm037_eet.o
 obj-$(CONFIG_MACH_MX31_3DS)	+= mx31pdk.o
@@ -19,3 +19,4 @@ obj-$(CONFIG_MACH_QONG)		+= qong.o
 obj-$(CONFIG_MACH_PCM043)	+= pcm043.o
 obj-$(CONFIG_MACH_ARMADILLO5X0) += armadillo5x0.o
 obj-$(CONFIG_MACH_MX35_3DS)	+= mx35pdk.o
+obj-$(CONFIG_MACH_KZM_ARM11_01)	+= kzmarm11.o

arch/arm/mach-mx3/armadillo5x0.c

@@ -33,6 +33,9 @@
 #include <linux/irq.h>
 #include <linux/mtd/physmap.h>
 #include <linux/io.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+#include <linux/i2c.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -97,6 +100,47 @@ static int armadillo5x0_pins[] = {
 	MX31_PIN_FPSHIFT__FPSHIFT,
 	MX31_PIN_DRDY0__DRDY0,
 	IOMUX_MODE(MX31_PIN_LCS1, IOMUX_CONFIG_GPIO), /*ADV7125_PSAVE*/
+	/* I2C2 */
+	MX31_PIN_CSPI2_MOSI__SCL,
+	MX31_PIN_CSPI2_MISO__SDA,
+};
+
+/* RTC over I2C*/
+#define ARMADILLO5X0_RTC_GPIO	IOMUX_TO_GPIO(MX31_PIN_SRXD4)
+
+static struct i2c_board_info armadillo5x0_i2c_rtc = {
+	I2C_BOARD_INFO("s35390a", 0x30),
+};
+
+/* GPIO BUTTONS */
+static struct gpio_keys_button armadillo5x0_buttons[] = {
+	{
+		.code		= KEY_ENTER, /*28*/
+		.gpio		= IOMUX_TO_GPIO(MX31_PIN_SCLK0),
+		.active_low	= 1,
+		.desc		= "menu",
+		.wakeup		= 1,
+	}, {
+		.code		= KEY_BACK, /*158*/
+		.gpio		= IOMUX_TO_GPIO(MX31_PIN_SRST0),
+		.active_low	= 1,
+		.desc		= "back",
+		.wakeup		= 1,
+	}
+};
+
+static struct gpio_keys_platform_data armadillo5x0_button_data = {
+	.buttons	= armadillo5x0_buttons,
+	.nbuttons	= ARRAY_SIZE(armadillo5x0_buttons),
+};
+
+static struct platform_device armadillo5x0_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &armadillo5x0_button_data,
+	}
 };
 
 /*
@@ -278,7 +322,7 @@ static struct resource armadillo5x0_smc911x_resources[] = {
 };
 
 static struct smsc911x_platform_config smsc911x_info = {
-	.flags		= SMSC911X_USE_32BIT,
+	.flags		= SMSC911X_USE_16BIT,
 	.irq_polarity   = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
 	.irq_type       = SMSC911X_IRQ_TYPE_PUSH_PULL,
 };
@@ -300,6 +344,8 @@ static struct imxuart_platform_data uart_pdata = {
 
 static struct platform_device *devices[] __initdata = {
 	&armadillo5x0_smc911x_device,
+	&mxc_i2c_device1,
+	&armadillo5x0_button_device,
 };
 
 /*
@@ -335,6 +381,18 @@ static void __init armadillo5x0_init(void)
 
 	/* set NAND page size to 2k if not configured via boot mode pins */
 	__raw_writel(__raw_readl(MXC_CCM_RCSR) | (1 << 30), MXC_CCM_RCSR);
+
+	/* RTC */
+	/* Get RTC IRQ and register the chip */
+	if (gpio_request(ARMADILLO5X0_RTC_GPIO, "rtc") == 0) {
+		if (gpio_direction_input(ARMADILLO5X0_RTC_GPIO) == 0)
+			armadillo5x0_i2c_rtc.irq = gpio_to_irq(ARMADILLO5X0_RTC_GPIO);
+		else
+			gpio_free(ARMADILLO5X0_RTC_GPIO);
+	}
+	if (armadillo5x0_i2c_rtc.irq == 0)
+		pr_warning("armadillo5x0_init: failed to get RTC IRQ\n");
+	i2c_register_board_info(1, &armadillo5x0_i2c_rtc, 1);
 }
 
 static void __init armadillo5x0_timer_init(void)

arch/arm/mach-mx3/clock-imx35.c

@@ -335,7 +335,7 @@ static void clk_cgr_disable(struct clk *clk)
 
 DEFINE_CLOCK(asrc_clk,   0, CCM_CGR0,  0, NULL, NULL);
 DEFINE_CLOCK(ata_clk,    0, CCM_CGR0,  2, get_rate_ipg, NULL);
-DEFINE_CLOCK(audmux_clk, 0, CCM_CGR0,  4, NULL, NULL);
+/* DEFINE_CLOCK(audmux_clk, 0, CCM_CGR0,  4, NULL, NULL); */
 DEFINE_CLOCK(can1_clk,   0, CCM_CGR0,  6, get_rate_ipg, NULL);
 DEFINE_CLOCK(can2_clk,   1, CCM_CGR0,  8, get_rate_ipg, NULL);
 DEFINE_CLOCK(cspi1_clk,  0, CCM_CGR0, 10, get_rate_ipg, NULL);
@@ -381,12 +381,43 @@ DEFINE_CLOCK(uart3_clk,  2, CCM_CGR2, 20, get_rate_uart, NULL);
 DEFINE_CLOCK(usbotg_clk, 0, CCM_CGR2, 22, get_rate_otg, NULL);
 DEFINE_CLOCK(wdog_clk,   0, CCM_CGR2, 24, NULL, NULL);
 DEFINE_CLOCK(max_clk,    0, CCM_CGR2, 26, NULL, NULL);
-DEFINE_CLOCK(admux_clk,  0, CCM_CGR2, 30, NULL, NULL);
+DEFINE_CLOCK(audmux_clk, 0, CCM_CGR2, 30, NULL, NULL);
 
 DEFINE_CLOCK(csi_clk,    0, CCM_CGR3,  0, get_rate_csi, NULL);
 DEFINE_CLOCK(iim_clk,    0, CCM_CGR3,  2, NULL, NULL);
 DEFINE_CLOCK(gpu2d_clk,  0, CCM_CGR3,  4, NULL, NULL);
 
+DEFINE_CLOCK(usbahb_clk, 0, 0,         0, get_rate_ahb, NULL);
+
+static int clk_dummy_enable(struct clk *clk)
+{
+	return 0;
+}
+
+static void clk_dummy_disable(struct clk *clk)
+{
+}
+
+static unsigned long get_rate_nfc(struct clk *clk)
+{
+	unsigned long div1;
+
+	div1 = (__raw_readl(CCM_BASE + CCM_PDR4) >> 28) + 1;
+
+	return get_rate_ahb(NULL) / div1;
+}
+
+/* NAND Controller: It seems it can't be disabled */
+static struct clk nfc_clk = {
+	.id		= 0,
+	.enable_reg	= 0,
+	.enable_shift	= 0,
+	.get_rate	= get_rate_nfc,
+	.set_rate	= NULL, /* set_rate_nfc, */
+	.enable		= clk_dummy_enable,
+	.disable	= clk_dummy_disable
+};
+
 #define _REGISTER_CLOCK(d, n, c)	\
 	{				\
 		.dev_id = d,		\
@@ -397,7 +428,6 @@ DEFINE_CLOCK(gpu2d_clk,  0, CCM_CGR3,  4, NULL, NULL);
 static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK(NULL, "asrc", asrc_clk)
 	_REGISTER_CLOCK(NULL, "ata", ata_clk)
-	_REGISTER_CLOCK(NULL, "audmux", audmux_clk)
 	_REGISTER_CLOCK(NULL, "can", can1_clk)
 	_REGISTER_CLOCK(NULL, "can", can2_clk)
 	_REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk)
@@ -434,8 +464,8 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK(NULL, "sdma", sdma_clk)
 	_REGISTER_CLOCK(NULL, "spba", spba_clk)
 	_REGISTER_CLOCK(NULL, "spdif", spdif_clk)
-	_REGISTER_CLOCK(NULL, "ssi", ssi1_clk)
+	_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
-	_REGISTER_CLOCK(NULL, "ssi", ssi2_clk)
+	_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
 	_REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
 	_REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
 	_REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
@@ -443,12 +473,14 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("mxc-ehci.1", "usb", usbotg_clk)
 	_REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk)
 	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usbotg_clk)
+	_REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usbahb_clk)
 	_REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
 	_REGISTER_CLOCK(NULL, "max", max_clk)
-	_REGISTER_CLOCK(NULL, "admux", admux_clk)
+	_REGISTER_CLOCK(NULL, "audmux", audmux_clk)
 	_REGISTER_CLOCK(NULL, "csi", csi_clk)
 	_REGISTER_CLOCK(NULL, "iim", iim_clk)
 	_REGISTER_CLOCK(NULL, "gpu2d", gpu2d_clk)
+	_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
 };
 
 int __init mx35_clocks_init()
@@ -456,7 +488,7 @@ int __init mx35_clocks_init()
 	int i;
 	unsigned int ll = 0;
 
-#ifdef CONFIG_DEBUG_LL_CONSOLE
+#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
 	ll = (3 << 16);
 #endif
 

arch/arm/mach-mx3/clock.c

@@ -558,8 +558,8 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("mxc_w1.0", NULL, owire_clk)
 	_REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc1_clk)
 	_REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc2_clk)
-	_REGISTER_CLOCK(NULL, "ssi", ssi1_clk)
+	_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
-	_REGISTER_CLOCK(NULL, "ssi", ssi2_clk)
+	_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
 	_REGISTER_CLOCK(NULL, "firi", firi_clk)
 	_REGISTER_CLOCK(NULL, "ata", ata_clk)
 	_REGISTER_CLOCK(NULL, "rtic", rtic_clk)
@@ -616,6 +616,8 @@ int __init mx31_clocks_init(unsigned long fref)
 
 	clk_enable(&serial_pll_clk);
 
+	mx31_read_cpu_rev();
+
 	if (mx31_revision() >= CHIP_REV_2_0) {
 		reg = __raw_readl(MXC_CCM_PMCR1);
 		/* No PLL restart on DVFS switch; enable auto EMI handshake */

arch/arm/mach-mx3/cpu.c

@@ -0,0 +1,57 @@
+/*
+ * MX3 CPU type detection
+ *
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
+#include <mach/iim.h>
+
+unsigned int mx31_cpu_rev;
+EXPORT_SYMBOL(mx31_cpu_rev);
+
+struct mx3_cpu_type {
+	u8 srev;
+	const char *name;
+	const char *v;
+	unsigned int rev;
+};
+
+static struct mx3_cpu_type mx31_cpu_type[] __initdata = {
+	{ .srev = 0x00, .name = "i.MX31(L)", .v = "1.0",  .rev = CHIP_REV_1_0	},
+	{ .srev = 0x10, .name = "i.MX31",    .v = "1.1",  .rev = CHIP_REV_1_1	},
+	{ .srev = 0x11, .name = "i.MX31L",   .v = "1.1",  .rev = CHIP_REV_1_1	},
+	{ .srev = 0x12, .name = "i.MX31",    .v = "1.15", .rev = CHIP_REV_1_1	},
+	{ .srev = 0x13, .name = "i.MX31L",   .v = "1.15", .rev = CHIP_REV_1_1	},
+	{ .srev = 0x14, .name = "i.MX31",    .v = "1.2",  .rev = CHIP_REV_1_2	},
+	{ .srev = 0x15, .name = "i.MX31L",   .v = "1.2",  .rev = CHIP_REV_1_2	},
+	{ .srev = 0x28, .name = "i.MX31",    .v = "2.0",  .rev = CHIP_REV_2_0	},
+	{ .srev = 0x29, .name = "i.MX31L",   .v = "2.0",  .rev = CHIP_REV_2_0	},
+};
+
+void __init mx31_read_cpu_rev(void)
+{
+	u32 i, srev;
+
+	/* read SREV register from IIM module */
+	srev = __raw_readl(IO_ADDRESS(IIM_BASE_ADDR) + MXC_IIMSREV);
+
+	for (i = 0; i < ARRAY_SIZE(mx31_cpu_type); i++)
+		if (srev == mx31_cpu_type[i].srev) {
+			printk(KERN_INFO
+				"CPU identified as %s, silicon rev %s\n",
+				mx31_cpu_type[i].name, mx31_cpu_type[i].v);
+
+			mx31_cpu_rev = mx31_cpu_type[i].rev;
+			return;
+		}
+
+	printk(KERN_WARNING "Unknown CPU identifier. srev = %02x\n", srev);
+}

arch/arm/mach-mx3/devices.c

@@ -537,6 +537,44 @@ struct platform_device mxc_fec_device = {
 };
 #endif
 
+static struct resource imx_ssi_resources0[] = {
+	{
+		.start	= SSI1_BASE_ADDR,
+		.end	= SSI1_BASE_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= MX31_INT_SSI1,
+		.end	= MX31_INT_SSI1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource imx_ssi_resources1[] = {
+	{
+		.start	= SSI2_BASE_ADDR,
+		.end	= SSI2_BASE_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM
+	}, {
+		.start	= MX31_INT_SSI2,
+		.end	= MX31_INT_SSI2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device imx_ssi_device0 = {
+	.name = "imx-ssi",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(imx_ssi_resources0),
+	.resource = imx_ssi_resources0,
+};
+
+struct platform_device imx_ssi_device1 = {
+	.name = "imx-ssi",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(imx_ssi_resources1),
+	.resource = imx_ssi_resources1,
+};
+
 static int mx3_devices_init(void)
 {
 	if (cpu_is_mx31()) {
@@ -546,7 +584,7 @@ static int mx3_devices_init(void)
 	}
 	if (cpu_is_mx35()) {
 		mxc_nand_resources[0].start = MX35_NFC_BASE_ADDR;
-		mxc_nand_resources[0].end = MX35_NFC_BASE_ADDR + 0xfff;
+		mxc_nand_resources[0].end = MX35_NFC_BASE_ADDR + 0x1fff;
 		otg_resources[0].start = MX35_OTG_BASE_ADDR;
 		otg_resources[0].end = MX35_OTG_BASE_ADDR + 0x1ff;
 		otg_resources[1].start = MXC_INT_USBOTG;
@@ -555,6 +593,10 @@ static int mx3_devices_init(void)
 		mxc_usbh1_resources[0].end = MX35_OTG_BASE_ADDR + 0x5ff;
 		mxc_usbh1_resources[1].start = MXC_INT_USBHS;
 		mxc_usbh1_resources[1].end = MXC_INT_USBHS;
+		imx_ssi_resources0[1].start = MX35_INT_SSI1;
+		imx_ssi_resources0[1].end = MX35_INT_SSI1;
+		imx_ssi_resources1[1].start = MX35_INT_SSI2;
+		imx_ssi_resources1[1].end = MX35_INT_SSI2;
 	}
 
 	return 0;

arch/arm/mach-mx3/devices.h

@@ -23,4 +23,6 @@ extern struct platform_device mxc_rnga_device;
 extern struct platform_device mxc_spi_device0;
 extern struct platform_device mxc_spi_device1;
 extern struct platform_device mxc_spi_device2;
+extern struct platform_device imx_ssi_device0;
+extern struct platform_device imx_ssi_device1;
 

arch/arm/mach-mx3/kzmarm11.c

@@ -0,0 +1,268 @@
+/*
+ * KZM-ARM11-01 support
+ *  Copyright (C) 2009  Yoichi Yuasa <yuasa@linux-mips.org>
+ *
+ * based on code for MX31ADS,
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *  Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/smsc911x.h>
+#include <linux/types.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+#include <asm/setup.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+
+#include <mach/board-kzmarm11.h>
+#include <mach/clock.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+#include <mach/memory.h>
+
+#include "devices.h"
+
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+/*
+ * KZM-ARM11-01 has an external UART on FPGA
+ */
+static struct plat_serial8250_port serial_platform_data[] = {
+	{
+		.membase	= IO_ADDRESS(KZM_ARM11_16550),
+		.mapbase	= KZM_ARM11_16550,
+		.irq		= IOMUX_TO_IRQ(MX31_PIN_GPIO1_1),
+		.irqflags	= IRQ_TYPE_EDGE_RISING,
+		.uartclk	= 14745600,
+		.regshift	= 0,
+		.iotype		= UPIO_MEM,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+				  UPF_BUGGY_UART,
+	},
+	{},
+};
+
+static struct resource serial8250_resources[] = {
+	{
+		.start	= KZM_ARM11_16550,
+		.end	= KZM_ARM11_16550 + 0x10,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_1),
+		.end	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_1),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device serial_device = {
+	.name		= "serial8250",
+	.id		= PLAT8250_DEV_PLATFORM,
+	.dev		= {
+				.platform_data = serial_platform_data,
+			  },
+	.num_resources	= ARRAY_SIZE(serial8250_resources),
+	.resource	= serial8250_resources,
+};
+
+static int __init kzm_init_ext_uart(void)
+{
+	u8 tmp;
+
+	/*
+	 * GPIO 1-1: external UART interrupt line
+	 */
+	mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO));
+	gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1), "ext-uart-int");
+	gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1));
+
+	/*
+	 * Unmask UART interrupt
+	 */
+	tmp = __raw_readb(IO_ADDRESS(KZM_ARM11_CTL1));
+	tmp |= 0x2;
+	__raw_writeb(tmp, IO_ADDRESS(KZM_ARM11_CTL1));
+
+	return platform_device_register(&serial_device);
+}
+#else
+static inline int kzm_init_ext_uart(void)
+{
+	return 0;
+}
+#endif
+
+/*
+ * SMSC LAN9118
+ */
+#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+static struct smsc911x_platform_config kzm_smsc9118_config = {
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
+	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
+	.flags		= SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
+};
+
+static struct resource kzm_smsc9118_resources[] = {
+	{
+		.start	= CS5_BASE_ADDR,
+		.end	= CS5_BASE_ADDR + SZ_128K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_2),
+		.end	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_2),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	},
+};
+
+static struct platform_device kzm_smsc9118_device = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(kzm_smsc9118_resources),
+	.resource	= kzm_smsc9118_resources,
+	.dev		= {
+				.platform_data = &kzm_smsc9118_config,
+			  },
+};
+
+static int __init kzm_init_smsc9118(void)
+{
+	/*
+	 * GPIO 1-2: SMSC9118 interrupt line
+	 */
+	mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO1_2, IOMUX_CONFIG_GPIO));
+	gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2), "smsc9118-int");
+	gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2));
+
+	return platform_device_register(&kzm_smsc9118_device);
+}
+#else
+static inline int kzm_init_smsc9118(void)
+{
+	return 0;
+}
+#endif
+
+#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static void __init kzm_init_imx_uart(void)
+{
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+
+	mxc_register_device(&mxc_uart_device1, &uart_pdata);
+}
+#else
+static inline void kzm_init_imx_uart(void)
+{
+}
+#endif
+
+static int kzm_pins[] __initdata = {
+	MX31_PIN_CTS1__CTS1,
+	MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1,
+	MX31_PIN_DCD_DCE1__DCD_DCE1,
+	MX31_PIN_RI_DCE1__RI_DCE1,
+	MX31_PIN_DSR_DCE1__DSR_DCE1,
+	MX31_PIN_DTR_DCE1__DTR_DCE1,
+	MX31_PIN_CTS2__CTS2,
+	MX31_PIN_RTS2__RTS2,
+	MX31_PIN_TXD2__TXD2,
+	MX31_PIN_RXD2__RXD2,
+	MX31_PIN_DCD_DTE1__DCD_DTE2,
+	MX31_PIN_RI_DTE1__RI_DTE2,
+	MX31_PIN_DSR_DTE1__DSR_DTE2,
+	MX31_PIN_DTR_DTE1__DTR_DTE2,
+};
+
+/*
+ * Board specific initialization.
+ */
+static void __init kzm_board_init(void)
+{
+	mxc_iomux_setup_multiple_pins(kzm_pins,
+				      ARRAY_SIZE(kzm_pins), "kzm");
+	kzm_init_ext_uart();
+	kzm_init_smsc9118();
+	kzm_init_imx_uart();
+
+	pr_info("Clock input source is 26MHz\n");
+}
+
+/*
+ * This structure defines static mappings for the kzm-arm11-01 board.
+ */
+static struct map_desc kzm_io_desc[] __initdata = {
+	{
+		.virtual	= CS4_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(CS4_BASE_ADDR),
+		.length		= CS4_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= CS5_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(CS5_BASE_ADDR),
+		.length		= CS5_SIZE,
+		.type		= MT_DEVICE
+	},
+};
+
+/*
+ * Set up static virtual mappings.
+ */
+static void __init kzm_map_io(void)
+{
+	mx31_map_io();
+	iotable_init(kzm_io_desc, ARRAY_SIZE(kzm_io_desc));
+}
+
+static void __init kzm_timer_init(void)
+{
+	mx31_clocks_init(26000000);
+}
+
+static struct sys_timer kzm_timer = {
+	.init   = kzm_timer_init,
+};
+
+/*
+ * The following uses standard kernel macros define in arch.h in order to
+ * initialize __mach_desc_KZM_ARM11_01 data structure.
+ */
+MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01")
+	.phys_io        = AIPS1_BASE_ADDR,
+	.io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = PHYS_OFFSET + 0x100,
+	.map_io         = kzm_map_io,
+	.init_irq       = mx31_init_irq,
+	.init_machine   = kzm_board_init,
+	.timer          = &kzm_timer,
+MACHINE_END

arch/arm/mach-mx3/mx31lilly-db.c

@@ -109,6 +109,9 @@ static int mxc_mmc1_get_ro(struct device *dev)
 
 static int gpio_det, gpio_wp;
 
+#define MMC_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
+			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
 static int mxc_mmc1_init(struct device *dev,
 			 irq_handler_t detect_irq, void *data)
 {
@@ -117,6 +120,13 @@ static int mxc_mmc1_init(struct device *dev,
 	gpio_det = IOMUX_TO_GPIO(MX31_PIN_GPIO1_1);
 	gpio_wp = IOMUX_TO_GPIO(MX31_PIN_LCS0);
 
+	mxc_iomux_set_pad(MX31_PIN_SD1_DATA0, MMC_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SD1_DATA1, MMC_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SD1_DATA2, MMC_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SD1_DATA3, MMC_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SD1_CLK, MMC_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SD1_CMD, MMC_PAD_CFG);
+
 	ret = gpio_request(gpio_det, "MMC detect");
 	if (ret)
 		return ret;

arch/arm/mach-mx3/mx31lilly.c

@@ -31,6 +31,8 @@
 #include <linux/interrupt.h>
 #include <linux/smsc911x.h>
 #include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/mfd/mc13783.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -41,6 +43,7 @@
 #include <mach/common.h>
 #include <mach/iomux-mx3.h>
 #include <mach/board-mx31lilly.h>
+#include <mach/spi.h>
 
 #include "devices.h"
 
@@ -108,7 +111,36 @@ static struct platform_device physmap_flash_device = {
 static struct platform_device *devices[] __initdata = {
 	&smsc91x_device,
 	&physmap_flash_device,
-	&mxc_i2c_device1,
+};
+
+/* SPI */
+
+static int spi_internal_chipselect[] = {
+	MXC_SPI_CS(0),
+	MXC_SPI_CS(1),
+	MXC_SPI_CS(2),
+};
+
+static struct spi_imx_master spi0_pdata = {
+	.chipselect = spi_internal_chipselect,
+	.num_chipselect = ARRAY_SIZE(spi_internal_chipselect),
+};
+
+static struct spi_imx_master spi1_pdata = {
+	.chipselect = spi_internal_chipselect,
+	.num_chipselect = ARRAY_SIZE(spi_internal_chipselect),
+};
+
+static struct mc13783_platform_data mc13783_pdata __initdata = {
+	.flags = MC13783_USE_RTC | MC13783_USE_TOUCHSCREEN,
+};
+
+static struct spi_board_info mc13783_dev __initdata = {
+	.modalias	= "mc13783",
+	.max_speed_hz	= 1000000,
+	.bus_num	= 1,
+	.chip_select	= 0,
+	.platform_data	= &mc13783_pdata,
 };
 
 static int mx31lilly_baseboard;
@@ -128,8 +160,27 @@ static void __init mx31lilly_board_init(void)
 	}
 
 	mxc_iomux_alloc_pin(MX31_PIN_CS4__CS4, "Ethernet CS");
-	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MOSI__SCL, "I2C SCL");
+
-	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MISO__SDA, "I2C SDA");
+	/* SPI */
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SCLK__SCLK, "SPI1_CLK");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_MOSI__MOSI, "SPI1_TX");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_MISO__MISO, "SPI1_RX");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SPI_RDY__SPI_RDY, "SPI1_RDY");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS0__SS0, "SPI1_SS0");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS1__SS1, "SPI1_SS1");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS2__SS2, "SPI1_SS2");
+
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SCLK__SCLK, "SPI2_CLK");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MOSI__MOSI, "SPI2_TX");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MISO__MISO, "SPI2_RX");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SPI_RDY__SPI_RDY, "SPI2_RDY");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS0__SS0, "SPI2_SS0");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS1__SS1, "SPI2_SS1");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS2__SS2, "SPI2_SS2");
+
+	mxc_register_device(&mxc_spi_device0, &spi0_pdata);
+	mxc_register_device(&mxc_spi_device1, &spi1_pdata);
+	spi_register_board_info(&mc13783_dev, 1);
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }

arch/arm/mach-mx3/mx31lite-db.c

@@ -0,0 +1,198 @@
+/*
+ *  LogicPD i.MX31 SOM-LV development board support
+ *
+ *    Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ *  based on code for other MX31 boards,
+ *
+ *    Copyright 2005-2007 Freescale Semiconductor
+ *    Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
+ *    Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+#include <mach/board-mx31lite.h>
+#include <mach/mmc.h>
+#include <mach/spi.h>
+
+#include "devices.h"
+
+/*
+ * This file contains board-specific initialization routines for the
+ * LogicPD i.MX31 SOM-LV development board, aka 'LiteKit'.
+ * If you design an own baseboard for the module, use this file as base
+ * for support code.
+ */
+
+static unsigned int litekit_db_board_pins[] __initdata = {
+	/* UART1 */
+	MX31_PIN_CTS1__CTS1,
+	MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1,
+	/* SPI 0 */
+	MX31_PIN_CSPI1_SCLK__SCLK,
+	MX31_PIN_CSPI1_MOSI__MOSI,
+	MX31_PIN_CSPI1_MISO__MISO,
+	MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
+	MX31_PIN_CSPI1_SS0__SS0,
+	MX31_PIN_CSPI1_SS1__SS1,
+	MX31_PIN_CSPI1_SS2__SS2,
+};
+
+/* UART */
+static struct imxuart_platform_data uart_pdata __initdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+/* MMC */
+
+static int gpio_det, gpio_wp;
+
+#define MMC_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
+			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
+static int mxc_mmc1_get_ro(struct device *dev)
+{
+	return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_LCS0));
+}
+
+static int mxc_mmc1_init(struct device *dev,
+			 irq_handler_t detect_irq, void *data)
+{
+	int ret;
+
+	gpio_det = IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1);
+	gpio_wp = IOMUX_TO_GPIO(MX31_PIN_GPIO1_6);
+
+	mxc_iomux_set_pad(MX31_PIN_SD1_DATA0, MMC_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SD1_DATA1, MMC_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SD1_DATA2, MMC_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SD1_DATA3, MMC_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SD1_CLK, MMC_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SD1_CMD, MMC_PAD_CFG);
+
+	ret = gpio_request(gpio_det, "MMC detect");
+	if (ret)
+		return ret;
+
+	ret = gpio_request(gpio_wp, "MMC w/p");
+	if (ret)
+		goto exit_free_det;
+
+	gpio_direction_input(gpio_det);
+	gpio_direction_input(gpio_wp);
+
+	ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_DCD_DCE1), detect_irq,
+			  IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+			  "MMC detect", data);
+	if (ret)
+		goto exit_free_wp;
+
+	return 0;
+
+exit_free_wp:
+	gpio_free(gpio_wp);
+
+exit_free_det:
+	gpio_free(gpio_det);
+
+	return ret;
+}
+
+static void mxc_mmc1_exit(struct device *dev, void *data)
+{
+	gpio_free(gpio_det);
+	gpio_free(gpio_wp);
+	free_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), data);
+}
+
+static struct imxmmc_platform_data mmc_pdata = {
+	.get_ro	 = mxc_mmc1_get_ro,
+	.init	   = mxc_mmc1_init,
+	.exit	   = mxc_mmc1_exit,
+};
+
+/* SPI */
+
+static int spi_internal_chipselect[] = {
+	MXC_SPI_CS(0),
+	MXC_SPI_CS(1),
+	MXC_SPI_CS(2),
+};
+
+static struct spi_imx_master spi0_pdata = {
+	.chipselect	= spi_internal_chipselect,
+	.num_chipselect	= ARRAY_SIZE(spi_internal_chipselect),
+};
+
+/* GPIO LEDs */
+
+static struct gpio_led litekit_leds[] = {
+	{
+		.name           = "GPIO0",
+		.gpio           = IOMUX_TO_GPIO(MX31_PIN_COMPARE),
+		.active_low     = 1,
+		.default_state  = LEDS_GPIO_DEFSTATE_OFF,
+	},
+	{
+		.name           = "GPIO1",
+		.gpio           = IOMUX_TO_GPIO(MX31_PIN_CAPTURE),
+		.active_low     = 1,
+		.default_state  = LEDS_GPIO_DEFSTATE_OFF,
+	}
+};
+
+static struct gpio_led_platform_data litekit_led_platform_data = {
+	.leds           = litekit_leds,
+	.num_leds       = ARRAY_SIZE(litekit_leds),
+};
+
+static struct platform_device litekit_led_device = {
+	.name   = "leds-gpio",
+	.id     = -1,
+	.dev    = {
+		.platform_data = &litekit_led_platform_data,
+	},
+};
+
+void __init mx31lite_db_init(void)
+{
+	mxc_iomux_setup_multiple_pins(litekit_db_board_pins,
+					ARRAY_SIZE(litekit_db_board_pins),
+					"development board pins");
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	mxc_register_device(&mxcsdhc_device0, &mmc_pdata);
+	mxc_register_device(&mxc_spi_device0, &spi0_pdata);
+	platform_device_register(&litekit_led_device);
+}
+

arch/arm/mach-mx3/mx31lite.c

@@ -2,6 +2,7 @@
  *  Copyright (C) 2000 Deep Blue Solutions Ltd
  *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
  *  Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *  Copyright (C) 2009 Daniel Mack <daniel@caiaq.de>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -25,38 +26,47 @@
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 #include <linux/smsc911x.h>
+#include <linux/mfd/mc13783.h>
+#include <linux/spi/spi.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+#include <linux/mtd/physmap.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
-#include <mach/common.h>
 #include <asm/page.h>
 #include <asm/setup.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
 #include <mach/board-mx31lite.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/irqs.h>
 #include <mach/mxc_nand.h>
+#include <mach/spi.h>
+#include <mach/mxc_ehci.h>
+#include <mach/ulpi.h>
+
 #include "devices.h"
 
 /*
- * This file contains the board-specific initialization routines.
+ * This file contains the module-specific initialization routines.
  */
 
 static unsigned int mx31lite_pins[] = {
-	/* UART1 */
-	MX31_PIN_CTS1__CTS1,
-	MX31_PIN_RTS1__RTS1,
-	MX31_PIN_TXD1__TXD1,
-	MX31_PIN_RXD1__RXD1,
 	/* LAN9117 IRQ pin */
 	IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO),
-};
+	/* SPI 1 */
-
+	MX31_PIN_CSPI2_SCLK__SCLK,
-static struct imxuart_platform_data uart_pdata = {
+	MX31_PIN_CSPI2_MOSI__MOSI,
-	.flags = IMXUART_HAVE_RTSCTS,
+	MX31_PIN_CSPI2_MISO__MISO,
+	MX31_PIN_CSPI2_SPI_RDY__SPI_RDY,
+	MX31_PIN_CSPI2_SS0__SS0,
+	MX31_PIN_CSPI2_SS1__SS1,
+	MX31_PIN_CSPI2_SS2__SS2,
 };
 
 static struct mxc_nand_platform_data mx31lite_nand_board_info = {
@@ -92,6 +102,111 @@ static struct platform_device smsc911x_device = {
 	},
 };
 
+/*
+ * SPI
+ *
+ * The MC13783 is the only hard-wired SPI device on the module.
+ */
+
+static int spi_internal_chipselect[] = {
+	MXC_SPI_CS(0),
+};
+
+static struct spi_imx_master spi1_pdata = {
+	.chipselect	= spi_internal_chipselect,
+	.num_chipselect	= ARRAY_SIZE(spi_internal_chipselect),
+};
+
+static struct mc13783_platform_data mc13783_pdata __initdata = {
+	.flags  = MC13783_USE_RTC |
+		  MC13783_USE_REGULATOR,
+};
+
+static struct spi_board_info mc13783_spi_dev __initdata = {
+	.modalias       = "mc13783",
+	.max_speed_hz   = 1000000,
+	.bus_num	= 1,
+	.chip_select    = 0,
+	.platform_data  = &mc13783_pdata,
+	.irq		= IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
+};
+
+/*
+ * USB
+ */
+
+#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
+			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
+static int usbh2_init(struct platform_device *pdev)
+{
+	int pins[] = {
+		MX31_PIN_USBH2_DATA0__USBH2_DATA0,
+		MX31_PIN_USBH2_DATA1__USBH2_DATA1,
+		MX31_PIN_USBH2_CLK__USBH2_CLK,
+		MX31_PIN_USBH2_DIR__USBH2_DIR,
+		MX31_PIN_USBH2_NXT__USBH2_NXT,
+		MX31_PIN_USBH2_STP__USBH2_STP,
+	};
+
+	mxc_iomux_setup_multiple_pins(pins, ARRAY_SIZE(pins), "USB H2");
+
+	mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG);
+
+	mxc_iomux_set_gpr(MUX_PGP_UH2, true);
+
+	/* chip select */
+	mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_GPIO),
+				"USBH2_CS");
+	gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), "USBH2 CS");
+	gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), 0);
+
+	return 0;
+}
+
+static struct mxc_usbh_platform_data usbh2_pdata = {
+	.init   = usbh2_init,
+	.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
+	.flags  = MXC_EHCI_POWER_PINS_ENABLED,
+};
+
+/*
+ * NOR flash
+ */
+
+static struct physmap_flash_data nor_flash_data = {
+	.width  = 2,
+};
+
+static struct resource nor_flash_resource = {
+	.start  = 0xa0000000,
+	.end    = 0xa1ffffff,
+	.flags  = IORESOURCE_MEM,
+};
+
+static struct platform_device physmap_flash_device = {
+	.name   = "physmap-flash",
+	.id     = 0,
+	.dev    = {
+		.platform_data  = &nor_flash_data,
+	},
+	.resource = &nor_flash_resource,
+	.num_resources = 1,
+};
+
+
+
 /*
  * This structure defines the MX31 memory map.
  */
@@ -118,19 +233,40 @@ void __init mx31lite_map_io(void)
 	iotable_init(mx31lite_io_desc, ARRAY_SIZE(mx31lite_io_desc));
 }
 
-/*
+static int mx31lite_baseboard;
- * Board specific initialization.
+core_param(mx31lite_baseboard, mx31lite_baseboard, int, 0444);
- */
+
 static void __init mxc_board_init(void)
 {
 	int ret;
 
+	switch (mx31lite_baseboard) {
+	case MX31LITE_NOBOARD:
+		break;
+	case MX31LITE_DB:
+		mx31lite_db_init();
+		break;
+	default:
+		printk(KERN_ERR "Illegal mx31lite_baseboard type %d\n",
+				mx31lite_baseboard);
+	}
+
 	mxc_iomux_setup_multiple_pins(mx31lite_pins, ARRAY_SIZE(mx31lite_pins),
 				      "mx31lite");
 
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	/* NOR and NAND flash */
+	platform_device_register(&physmap_flash_device);
 	mxc_register_device(&mxc_nand_device, &mx31lite_nand_board_info);
 
+	mxc_register_device(&mxc_spi_device1, &spi1_pdata);
+	spi_register_board_info(&mc13783_spi_dev, 1);
+
+	/* USB */
+	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+
 	/* SMSC9117 IRQ pin */
 	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq");
 	if (ret)
@@ -150,12 +286,7 @@ struct sys_timer mx31lite_timer = {
 	.init	= mx31lite_timer_init,
 };
 
-/*
+MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM")
- * The following uses standard kernel macros defined in arch.h in order to
- * initialize __mach_desc_MX31LITE data structure.
- */
-
-MACHINE_START(MX31LITE, "LogicPD MX31 LITEKIT")
 	/* Maintainer: Freescale Semiconductor, Inc. */
 	.phys_io        = AIPS1_BASE_ADDR,
 	.io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,

arch/arm/mach-mx3/mx31moboard-devboard.c

@@ -22,11 +22,15 @@
 #include <linux/platform_device.h>
 #include <linux/types.h>
 
+#include <linux/usb/otg.h>
+
 #include <mach/common.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/hardware.h>
 #include <mach/mmc.h>
+#include <mach/mxc_ehci.h>
+#include <mach/ulpi.h>
 
 #include "devices.h"
 
@@ -39,6 +43,12 @@ static unsigned int devboard_pins[] = {
 	MX31_PIN_PC_READY__SD2_DATA1, MX31_PIN_PC_WAIT_B__SD2_DATA0,
 	MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD,
 	MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29,
+	/* USB H1 */
+	MX31_PIN_CSPI1_MISO__USBH1_RXDP, MX31_PIN_CSPI1_MOSI__USBH1_RXDM,
+	MX31_PIN_CSPI1_SS0__USBH1_TXDM, MX31_PIN_CSPI1_SS1__USBH1_TXDP,
+	MX31_PIN_CSPI1_SS2__USBH1_RCV, MX31_PIN_CSPI1_SCLK__USBH1_OEB,
+	MX31_PIN_CSPI1_SPI_RDY__USBH1_FS, MX31_PIN_SFS6__USBH1_SUSPEND,
+	MX31_PIN_NFRE_B__GPIO1_11, MX31_PIN_NFALE__GPIO1_12,
 };
 
 static struct imxuart_platform_data uart_pdata = {
@@ -98,6 +108,80 @@ static struct imxmmc_platform_data sdhc2_pdata = {
 	.exit	= devboard_sdhc2_exit,
 };
 
+#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
+			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
+static int devboard_usbh1_hw_init(struct platform_device *pdev)
+{
+	mxc_iomux_set_gpr(MUX_PGP_USB_SUSPEND, true);
+
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_MISO, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_MOSI, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SS0, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SS1, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SS2, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SCLK, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SPI_RDY, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SFS6, USB_PAD_CFG);
+
+	return 0;
+}
+
+#define USBH1_VBUSEN_B	IOMUX_TO_GPIO(MX31_PIN_NFRE_B)
+#define USBH1_MODE	IOMUX_TO_GPIO(MX31_PIN_NFALE)
+
+static int devboard_isp1105_init(struct otg_transceiver *otg)
+{
+	int ret = gpio_request(USBH1_MODE, "usbh1-mode");
+	if (ret)
+		return ret;
+	/* single ended */
+	gpio_direction_output(USBH1_MODE, 0);
+
+	ret = gpio_request(USBH1_VBUSEN_B, "usbh1-vbusen");
+	if (ret) {
+		gpio_free(USBH1_MODE);
+		return ret;
+	}
+	gpio_direction_output(USBH1_VBUSEN_B, 1);
+
+	return 0;
+}
+
+
+static int devboard_isp1105_set_vbus(struct otg_transceiver *otg, bool on)
+{
+	if (on)
+		gpio_set_value(USBH1_VBUSEN_B, 0);
+	else
+		gpio_set_value(USBH1_VBUSEN_B, 1);
+
+	return 0;
+}
+
+static struct mxc_usbh_platform_data usbh1_pdata = {
+	.init	= devboard_usbh1_hw_init,
+	.portsc	= MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL,
+	.flags	= MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_SINGLE_UNI,
+};
+
+static int __init devboard_usbh1_init(void)
+{
+	struct otg_transceiver *otg;
+
+	otg = kzalloc(sizeof(*otg), GFP_KERNEL);
+	if (!otg)
+		return -ENOMEM;
+
+	otg->label	= "ISP1105";
+	otg->init	= devboard_isp1105_init;
+	otg->set_vbus	= devboard_isp1105_set_vbus;
+
+	usbh1_pdata.otg = otg;
+
+	return mxc_register_device(&mx31_usbh1, &usbh1_pdata);
+}
+
 /*
  * system init for baseboard usage. Will be called by mx31moboard init.
  */
@@ -111,4 +195,6 @@ void __init mx31moboard_devboard_init(void)
 	mxc_register_device(&mxc_uart_device1, &uart_pdata);
 
 	mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
+
+	devboard_usbh1_init();
 }

arch/arm/mach-mx3/mx31moboard-marxbot.c

@@ -16,17 +16,26 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
+#include <linux/delay.h>
 #include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/spi/spi.h>
 #include <linux/platform_device.h>
 #include <linux/types.h>
 
+#include <linux/usb/otg.h>
+
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/mmc.h>
+#include <mach/mxc_ehci.h>
+#include <mach/ulpi.h>
+
+#include <media/soc_camera.h>
 
 #include "devices.h"
 
@@ -37,7 +46,6 @@ static unsigned int marxbot_pins[] = {
 	MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD,
 	MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29,
 	/* CSI */
-	MX31_PIN_CSI_D4__CSI_D4, MX31_PIN_CSI_D5__CSI_D5,
 	MX31_PIN_CSI_D6__CSI_D6, MX31_PIN_CSI_D7__CSI_D7,
 	MX31_PIN_CSI_D8__CSI_D8, MX31_PIN_CSI_D9__CSI_D9,
 	MX31_PIN_CSI_D10__CSI_D10, MX31_PIN_CSI_D11__CSI_D11,
@@ -45,10 +53,19 @@ static unsigned int marxbot_pins[] = {
 	MX31_PIN_CSI_D14__CSI_D14, MX31_PIN_CSI_D15__CSI_D15,
 	MX31_PIN_CSI_HSYNC__CSI_HSYNC, MX31_PIN_CSI_MCLK__CSI_MCLK,
 	MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, MX31_PIN_CSI_VSYNC__CSI_VSYNC,
+	MX31_PIN_CSI_D4__GPIO3_4, MX31_PIN_CSI_D5__GPIO3_5,
 	MX31_PIN_GPIO3_0__GPIO3_0, MX31_PIN_GPIO3_1__GPIO3_1,
 	MX31_PIN_TXD2__GPIO1_28,
 	/* dsPIC resets */
 	MX31_PIN_STXD5__GPIO1_21, MX31_PIN_SRXD5__GPIO1_22,
+	/*battery detection */
+	MX31_PIN_LCS0__GPIO3_23,
+	/* USB H1 */
+	MX31_PIN_CSPI1_MISO__USBH1_RXDP, MX31_PIN_CSPI1_MOSI__USBH1_RXDM,
+	MX31_PIN_CSPI1_SS0__USBH1_TXDM, MX31_PIN_CSPI1_SS1__USBH1_TXDP,
+	MX31_PIN_CSPI1_SS2__USBH1_RCV, MX31_PIN_CSPI1_SCLK__USBH1_OEB,
+	MX31_PIN_CSPI1_SPI_RDY__USBH1_FS, MX31_PIN_SFS6__USBH1_SUSPEND,
+	MX31_PIN_NFRE_B__GPIO1_11, MX31_PIN_NFALE__GPIO1_12,
 };
 
 #define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR)
@@ -120,6 +137,166 @@ static void dspics_resets_init(void)
 	}
 }
 
+static struct spi_board_info marxbot_spi_board_info[] __initdata = {
+	{
+		.modalias = "spidev",
+		.max_speed_hz = 300000,
+		.bus_num = 1,
+		.chip_select = 1, /* according spi1_cs[] ! */
+	},
+};
+
+#define TURRETCAM_POWER	IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)
+#define BASECAM_POWER	IOMUX_TO_GPIO(MX31_PIN_CSI_D5)
+#define TURRETCAM_RST_B	IOMUX_TO_GPIO(MX31_PIN_GPIO3_0)
+#define BASECAM_RST_B	IOMUX_TO_GPIO(MX31_PIN_CSI_D4)
+#define CAM_CHOICE	IOMUX_TO_GPIO(MX31_PIN_TXD2)
+
+static int marxbot_basecam_power(struct device *dev, int on)
+{
+	gpio_set_value(BASECAM_POWER, !on);
+	return 0;
+}
+
+static int marxbot_basecam_reset(struct device *dev)
+{
+	gpio_set_value(BASECAM_RST_B, 0);
+	udelay(100);
+	gpio_set_value(BASECAM_RST_B, 1);
+	return 0;
+}
+
+static struct i2c_board_info marxbot_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("mt9t031", 0x5d),
+	},
+};
+
+static struct soc_camera_link base_iclink = {
+	.bus_id		= 0,		/* Must match with the camera ID */
+	.power		= marxbot_basecam_power,
+	.reset		= marxbot_basecam_reset,
+	.board_info	= &marxbot_i2c_devices[0],
+	.i2c_adapter_id	= 0,
+	.module_name	= "mt9t031",
+};
+
+static struct platform_device marxbot_camera[] = {
+	{
+		.name	= "soc-camera-pdrv",
+		.id	= 0,
+		.dev	= {
+			.platform_data = &base_iclink,
+		},
+	},
+};
+
+static struct platform_device *marxbot_cameras[] __initdata = {
+	&marxbot_camera[0],
+};
+
+static int __init marxbot_cam_init(void)
+{
+	int ret = gpio_request(CAM_CHOICE, "cam-choice");
+	if (ret)
+		return ret;
+	gpio_direction_output(CAM_CHOICE, 1);
+
+	ret = gpio_request(BASECAM_RST_B, "basecam-reset");
+	if (ret)
+		return ret;
+	gpio_direction_output(BASECAM_RST_B, 1);
+	ret = gpio_request(BASECAM_POWER, "basecam-standby");
+	if (ret)
+		return ret;
+	gpio_direction_output(BASECAM_POWER, 0);
+
+	ret = gpio_request(TURRETCAM_RST_B, "turretcam-reset");
+	if (ret)
+		return ret;
+	gpio_direction_output(TURRETCAM_RST_B, 1);
+	ret = gpio_request(TURRETCAM_POWER, "turretcam-standby");
+	if (ret)
+		return ret;
+	gpio_direction_output(TURRETCAM_POWER, 0);
+
+	return 0;
+}
+
+#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
+			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
+static int marxbot_usbh1_hw_init(struct platform_device *pdev)
+{
+	mxc_iomux_set_gpr(MUX_PGP_USB_SUSPEND, true);
+
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_MISO, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_MOSI, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SS0, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SS1, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SS2, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SCLK, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SPI_RDY, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SFS6, USB_PAD_CFG);
+
+	return 0;
+}
+
+#define USBH1_VBUSEN_B	IOMUX_TO_GPIO(MX31_PIN_NFRE_B)
+#define USBH1_MODE	IOMUX_TO_GPIO(MX31_PIN_NFALE)
+
+static int marxbot_isp1105_init(struct otg_transceiver *otg)
+{
+	int ret = gpio_request(USBH1_MODE, "usbh1-mode");
+	if (ret)
+		return ret;
+	/* single ended */
+	gpio_direction_output(USBH1_MODE, 0);
+
+	ret = gpio_request(USBH1_VBUSEN_B, "usbh1-vbusen");
+	if (ret) {
+		gpio_free(USBH1_MODE);
+		return ret;
+	}
+	gpio_direction_output(USBH1_VBUSEN_B, 1);
+
+	return 0;
+}
+
+
+static int marxbot_isp1105_set_vbus(struct otg_transceiver *otg, bool on)
+{
+	if (on)
+		gpio_set_value(USBH1_VBUSEN_B, 0);
+	else
+		gpio_set_value(USBH1_VBUSEN_B, 1);
+
+	return 0;
+}
+
+static struct mxc_usbh_platform_data usbh1_pdata = {
+	.init	= marxbot_usbh1_hw_init,
+	.portsc	= MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL,
+	.flags	= MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_SINGLE_UNI,
+};
+
+static int __init marxbot_usbh1_init(void)
+{
+	struct otg_transceiver *otg;
+
+	otg = kzalloc(sizeof(*otg), GFP_KERNEL);
+	if (!otg)
+		return -ENOMEM;
+
+	otg->label	= "ISP1105";
+	otg->init	= marxbot_isp1105_init;
+	otg->set_vbus	= marxbot_isp1105_set_vbus;
+
+	usbh1_pdata.otg = otg;
+
+	return mxc_register_device(&mx31_usbh1, &usbh1_pdata);
+}
+
 /*
  * system init for baseboard usage. Will be called by mx31moboard init.
  */
@@ -133,4 +310,17 @@ void __init mx31moboard_marxbot_init(void)
 	dspics_resets_init();
 
 	mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
+
+	spi_register_board_info(marxbot_spi_board_info,
+		ARRAY_SIZE(marxbot_spi_board_info));
+
+	marxbot_cam_init();
+	platform_add_devices(marxbot_cameras, ARRAY_SIZE(marxbot_cameras));
+
+	/* battery present pin */
+	gpio_request(IOMUX_TO_GPIO(MX31_PIN_LCS0), "bat-present");
+	gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_LCS0));
+	gpio_export(IOMUX_TO_GPIO(MX31_PIN_LCS0), false);
+
+	marxbot_usbh1_init();
 }

arch/arm/mach-mx3/mx31moboard.c

@@ -17,6 +17,7 @@
  */
 
 #include <linux/delay.h>
+#include <linux/dma-mapping.h>
 #include <linux/fsl_devices.h>
 #include <linux/gpio.h>
 #include <linux/init.h>
@@ -26,8 +27,14 @@
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/partitions.h>
 #include <linux/platform_device.h>
+#include <linux/regulator/machine.h>
+#include <linux/mfd/mc13783.h>
+#include <linux/spi/spi.h>
 #include <linux/types.h>
 
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
@@ -37,16 +44,20 @@
 #include <mach/hardware.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
+#include <mach/ipu.h>
 #include <mach/i2c.h>
 #include <mach/mmc.h>
-#include <mach/mx31.h>
+#include <mach/mxc_ehci.h>
+#include <mach/mx3_camera.h>
+#include <mach/spi.h>
+#include <mach/ulpi.h>
 
 #include "devices.h"
 
 static unsigned int moboard_pins[] = {
 	/* UART0 */
-	MX31_PIN_CTS1__CTS1, MX31_PIN_RTS1__RTS1,
 	MX31_PIN_TXD1__TXD1, MX31_PIN_RXD1__RXD1,
+	MX31_PIN_CTS1__GPIO2_7,
 	/* UART4 */
 	MX31_PIN_PC_RST__CTS5, MX31_PIN_PC_VS2__RTS5,
 	MX31_PIN_PC_BVD2__TXD5, MX31_PIN_PC_BVD1__RXD5,
@@ -73,12 +84,31 @@ static unsigned int moboard_pins[] = {
 	MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR,
 	MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP,
 	MX31_PIN_USB_OC__GPIO1_30,
+	/* USB H2 */
+	MX31_PIN_USBH2_DATA0__USBH2_DATA0,
+	MX31_PIN_USBH2_DATA1__USBH2_DATA1,
+	MX31_PIN_STXD3__USBH2_DATA2, MX31_PIN_SRXD3__USBH2_DATA3,
+	MX31_PIN_SCK3__USBH2_DATA4, MX31_PIN_SFS3__USBH2_DATA5,
+	MX31_PIN_STXD6__USBH2_DATA6, MX31_PIN_SRXD6__USBH2_DATA7,
+	MX31_PIN_USBH2_CLK__USBH2_CLK, MX31_PIN_USBH2_DIR__USBH2_DIR,
+	MX31_PIN_USBH2_NXT__USBH2_NXT, MX31_PIN_USBH2_STP__USBH2_STP,
+	MX31_PIN_SCK6__GPIO1_25,
 	/* LEDs */
 	MX31_PIN_SVEN0__GPIO2_0, MX31_PIN_STX0__GPIO2_1,
 	MX31_PIN_SRX0__GPIO2_2, MX31_PIN_SIMPD0__GPIO2_3,
 	/* SEL */
 	MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9,
 	MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
+	/* SPI1 */
+	MX31_PIN_CSPI2_MOSI__MOSI, MX31_PIN_CSPI2_MISO__MISO,
+	MX31_PIN_CSPI2_SCLK__SCLK, MX31_PIN_CSPI2_SPI_RDY__SPI_RDY,
+	MX31_PIN_CSPI2_SS0__SS0, MX31_PIN_CSPI2_SS2__SS2,
+	/* Atlas IRQ */
+	MX31_PIN_GPIO1_3__GPIO1_3,
+	/* SPI2 */
+	MX31_PIN_CSPI3_MOSI__MOSI, MX31_PIN_CSPI3_MISO__MISO,
+	MX31_PIN_CSPI3_SCLK__SCLK, MX31_PIN_CSPI3_SPI_RDY__SPI_RDY,
+	MX31_PIN_CSPI2_SS1__CSPI3_SS1,
 };
 
 static struct physmap_flash_data mx31moboard_flash_data = {
@@ -101,7 +131,18 @@ static struct platform_device mx31moboard_flash = {
 	.num_resources = 1,
 };
 
-static struct imxuart_platform_data uart_pdata = {
+static int moboard_uart0_init(struct platform_device *pdev)
+{
+	gpio_request(IOMUX_TO_GPIO(MX31_PIN_CTS1), "uart0-cts-hack");
+	gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CTS1), 0);
+	return 0;
+}
+
+static struct imxuart_platform_data uart0_pdata = {
+	.init = moboard_uart0_init,
+};
+
+static struct imxuart_platform_data uart4_pdata = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
@@ -113,6 +154,103 @@ static struct imxi2c_platform_data moboard_i2c1_pdata = {
 	.bitrate = 100000,
 };
 
+static int moboard_spi1_cs[] = {
+	MXC_SPI_CS(0),
+	MXC_SPI_CS(2),
+};
+
+static struct spi_imx_master moboard_spi1_master = {
+	.chipselect	= moboard_spi1_cs,
+	.num_chipselect	= ARRAY_SIZE(moboard_spi1_cs),
+};
+
+static struct regulator_consumer_supply sdhc_consumers[] = {
+	{
+		.dev	= &mxcsdhc_device0.dev,
+		.supply	= "sdhc0_vcc",
+	},
+	{
+		.dev	= &mxcsdhc_device1.dev,
+		.supply	= "sdhc1_vcc",
+	},
+};
+
+static struct regulator_init_data sdhc_vreg_data = {
+	.constraints = {
+		.min_uV = 2700000,
+		.max_uV = 3000000,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+			REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
+		.valid_modes_mask = REGULATOR_MODE_NORMAL |
+			REGULATOR_MODE_FAST,
+		.always_on = 0,
+		.boot_on = 1,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(sdhc_consumers),
+	.consumer_supplies = sdhc_consumers,
+};
+
+static struct regulator_consumer_supply cam_consumers[] = {
+	{
+		.dev	= &mx3_camera.dev,
+		.supply	= "cam_vcc",
+	},
+};
+
+static struct regulator_init_data cam_vreg_data = {
+	.constraints = {
+		.min_uV = 2700000,
+		.max_uV = 3000000,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+			REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
+		.valid_modes_mask = REGULATOR_MODE_NORMAL |
+			REGULATOR_MODE_FAST,
+		.always_on = 0,
+		.boot_on = 1,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(cam_consumers),
+	.consumer_supplies = cam_consumers,
+};
+
+static struct mc13783_regulator_init_data moboard_regulators[] = {
+	{
+		.id = MC13783_REGU_VMMC1,
+		.init_data = &sdhc_vreg_data,
+	},
+	{
+		.id = MC13783_REGU_VCAM,
+		.init_data = &cam_vreg_data,
+	},
+};
+
+static struct mc13783_platform_data moboard_pmic = {
+	.regulators = moboard_regulators,
+	.num_regulators = ARRAY_SIZE(moboard_regulators),
+	.flags = MC13783_USE_REGULATOR | MC13783_USE_RTC |
+		MC13783_USE_ADC,
+};
+
+static struct spi_board_info moboard_spi_board_info[] __initdata = {
+	{
+		.modalias = "mc13783",
+		.irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
+		.max_speed_hz = 300000,
+		.bus_num = 1,
+		.chip_select = 0,
+		.platform_data = &moboard_pmic,
+		.mode = SPI_CS_HIGH,
+	},
+};
+
+static int moboard_spi2_cs[] = {
+	MXC_SPI_CS(1),
+};
+
+static struct spi_imx_master moboard_spi2_master = {
+	.chipselect	= moboard_spi2_cs,
+	.num_chipselect	= ARRAY_SIZE(moboard_spi2_cs),
+};
+
 #define SDHC1_CD IOMUX_TO_GPIO(MX31_PIN_ATA_CS0)
 #define SDHC1_WP IOMUX_TO_GPIO(MX31_PIN_ATA_CS1)
 
@@ -208,6 +346,56 @@ static struct fsl_usb2_platform_data usb_pdata = {
 	.phy_mode	= FSL_USB2_PHY_ULPI,
 };
 
+#define USBH2_EN_B IOMUX_TO_GPIO(MX31_PIN_SCK6)
+
+static int moboard_usbh2_hw_init(struct platform_device *pdev)
+{
+	int ret = gpio_request(USBH2_EN_B, "usbh2-en");
+	if (ret)
+		return ret;
+
+	mxc_iomux_set_gpr(MUX_PGP_UH2, true);
+
+	mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG);
+
+	gpio_direction_output(USBH2_EN_B, 0);
+
+	return 0;
+}
+
+static int moboard_usbh2_hw_exit(struct platform_device *pdev)
+{
+	gpio_free(USBH2_EN_B);
+	return 0;
+}
+
+static struct mxc_usbh_platform_data usbh2_pdata = {
+	.init	= moboard_usbh2_hw_init,
+	.exit	= moboard_usbh2_hw_exit,
+	.portsc	= MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
+	.flags	= MXC_EHCI_POWER_PINS_ENABLED,
+};
+
+static int __init moboard_usbh2_init(void)
+{
+	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+			USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+	return mxc_register_device(&mx31_usbh2, &usbh2_pdata);
+}
+
+
 static struct gpio_led mx31moboard_leds[] = {
 	{
 		.name 	= "coreboard-led-0:red:running",
@@ -266,11 +454,48 @@ static void mx31moboard_init_sel_gpios(void)
 	}
 }
 
+static struct ipu_platform_data mx3_ipu_data = {
+	.irq_base = MXC_IPU_IRQ_START,
+};
+
 static struct platform_device *devices[] __initdata = {
 	&mx31moboard_flash,
 	&mx31moboard_leds_device,
 };
 
+static struct mx3_camera_pdata camera_pdata = {
+	.dma_dev	= &mx3_ipu.dev,
+	.flags		= MX3_CAMERA_DATAWIDTH_8 | MX3_CAMERA_DATAWIDTH_10,
+	.mclk_10khz	= 4800,
+};
+
+#define CAMERA_BUF_SIZE	(4*1024*1024)
+
+static int __init mx31moboard_cam_alloc_dma(const size_t buf_size)
+{
+	dma_addr_t dma_handle;
+	void *buf;
+	int dma;
+
+	if (buf_size < 2 * 1024 * 1024)
+		return -EINVAL;
+
+	buf = dma_alloc_coherent(NULL, buf_size, &dma_handle, GFP_KERNEL);
+	if (!buf) {
+		pr_err("%s: cannot allocate camera buffer-memory\n", __func__);
+		return -ENOMEM;
+	}
+
+	memset(buf, 0, buf_size);
+
+	dma = dma_declare_coherent_memory(&mx3_camera.dev,
+					dma_handle, dma_handle, buf_size,
+					DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
+
+	/* The way we call dma_declare_coherent_memory only a malloc can fail */
+	return dma & DMA_MEMORY_MAP ? 0 : -ENOMEM;
+}
+
 static int mx31moboard_baseboard;
 core_param(mx31moboard_baseboard, mx31moboard_baseboard, int, 0444);
 
@@ -284,20 +509,34 @@ static void __init mxc_board_init(void)
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	mxc_register_device(&mxc_uart_device0, &uart0_pdata);
-	mxc_register_device(&mxc_uart_device4, &uart_pdata);
+
+	mxc_register_device(&mxc_uart_device4, &uart4_pdata);
 
 	mx31moboard_init_sel_gpios();
 
 	mxc_register_device(&mxc_i2c_device0, &moboard_i2c0_pdata);
 	mxc_register_device(&mxc_i2c_device1, &moboard_i2c1_pdata);
 
+	mxc_register_device(&mxc_spi_device1, &moboard_spi1_master);
+	mxc_register_device(&mxc_spi_device2, &moboard_spi2_master);
+
+	gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3), "pmic-irq");
+	gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
+	spi_register_board_info(moboard_spi_board_info,
+		ARRAY_SIZE(moboard_spi_board_info));
+
 	mxc_register_device(&mxcsdhc_device0, &sdhc1_pdata);
 
+	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
+	if (!mx31moboard_cam_alloc_dma(CAMERA_BUF_SIZE))
+		mxc_register_device(&mx3_camera, &camera_pdata);
+
 	usb_xcvr_reset();
 
 	moboard_usbotg_init();
 	mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
+	moboard_usbh2_init();
 
 	switch (mx31moboard_baseboard) {
 	case MX31NOBOARD:

arch/arm/mach-mx3/mx35pdk.c

@@ -23,6 +23,7 @@
 #include <linux/platform_device.h>
 #include <linux/memory.h>
 #include <linux/gpio.h>
+#include <linux/fsl_devices.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -69,6 +70,15 @@ static struct pad_desc mx35pdk_pads[] = {
 	MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
 	MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
 	MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
+	/* USBOTG */
+	MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR,
+	MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC,
+};
+
+/* OTG config */
+static struct fsl_usb2_platform_data usb_pdata = {
+	.operating_mode	= FSL_USB2_DR_DEVICE,
+	.phy_mode	= FSL_USB2_PHY_UTMI_WIDE,
 };
 
 /*
@@ -81,6 +91,8 @@ static void __init mxc_board_init(void)
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
 	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+
+	mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
 }
 
 static void __init mx35pdk_timer_init(void)

arch/arm/mach-mx3/pcm043.c

@@ -43,6 +43,7 @@
 #include <mach/iomux-mx35.h>
 #include <mach/ipu.h>
 #include <mach/mx3fb.h>
+#include <mach/mxc_nand.h>
 
 #include "devices.h"
 
@@ -206,6 +207,11 @@ static struct pad_desc pcm043_pads[] = {
 	MX35_PAD_ATA_CS0__GPIO2_6,
 };
 
+static struct mxc_nand_platform_data pcm037_nand_board_info = {
+	.width = 1,
+	.hw_ecc = 1,
+};
+
 /*
  * Board specific initialization.
  */
@@ -216,6 +222,7 @@ static void __init mxc_board_init(void)
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
 	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
 
 	mxc_register_device(&mxc_uart_device1, &uart_pdata);
 

arch/arm/mach-pxa/Kconfig

@@ -2,34 +2,105 @@ if ARCH_PXA
 
 menu "Intel PXA2xx/PXA3xx Implementations"
 
-if PXA3xx
+comment "Intel/Marvell Dev Platforms (sorted by hardware release time)"
 
-menu "Supported PXA3xx Processor Variants"
+config ARCH_LUBBOCK
+	bool "Intel DBPXA250 Development Platform (aka Lubbock)"
+	select PXA25x
+	select SA1111
+	select PXA_HAVE_BOARD_IRQS
 
-config CPU_PXA300
+config MACH_MAINSTONE
-	bool "PXA300 (codename Monahans-L)"
+	bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)"
+	select PXA27x
+	select HAVE_PWM
+	select PXA_HAVE_BOARD_IRQS
 
-config CPU_PXA310
+config MACH_ZYLONITE
-	bool "PXA310 (codename Monahans-LV)"
+	bool
+	select PXA3xx
+	select PXA_SSP
+	select HAVE_PWM
+	select PXA_HAVE_BOARD_IRQS
+
+config MACH_ZYLONITE300
+	bool "PXA3xx Development Platform (aka Zylonite) PXA300/310"
 	select CPU_PXA300
+	select CPU_PXA310
+	select MACH_ZYLONITE
 
-config CPU_PXA320
+config MACH_ZYLONITE320
-	bool "PXA320 (codename Monahans-P)"
+	bool "PXA3xx Development Platform (aka Zylonite) PXA320"
+	select CPU_PXA320
+	select MACH_ZYLONITE
 
-config CPU_PXA930
+config MACH_LITTLETON
-	bool "PXA930 (codename Tavor-P)"
+	bool "PXA3xx Form Factor Platform (aka Littleton)"
+	select PXA3xx
+	select PXA_SSP
 
-config CPU_PXA935
+config MACH_TAVOREVB
-	bool "PXA935 (codename Tavor-P65)"
+	bool "PXA930 Evaluation Board (aka TavorEVB)"
+	select PXA3xx
 	select CPU_PXA930
 
-config CPU_PXA950
+config MACH_SAAR
-	bool "PXA950 (codename Tavor-PV2)"
+	bool "PXA930 Handheld Platform (aka SAAR)"
+	select PXA3xx
 	select CPU_PXA930
 
-endmenu
+comment "Third Party Dev Platforms (sorted by vendor name)"
 
-endif
+config ARCH_PXA_IDP
+	bool "Accelent Xscale IDP"
+	select PXA25x
+
+config ARCH_VIPER
+	bool "Arcom/Eurotech VIPER SBC"
+	select PXA25x
+	select ISA
+	select I2C_GPIO
+	select HAVE_PWM
+	select PXA_HAVE_BOARD_IRQS
+	select PXA_HAVE_ISA_IRQS
+
+config MACH_BALLOON3
+	bool "Balloon 3 board"
+	select PXA27x
+	select IWMMXT
+	select PXA_HAVE_BOARD_IRQS
+
+config MACH_CSB726
+	bool "Enable Cogent CSB726 System On a Module"
+	select PXA27x
+	select IWMMXT
+	help
+	  Say Y here if you intend to run this kernel on a Cogent
+	  CSB726 System On Module.
+
+config CSB726_CSB701
+	bool "Enable support for CSB701 baseboard"
+	depends on MACH_CSB726
+
+config MACH_ARMCORE
+	bool "CompuLab CM-X255/CM-X270 modules"
+	select PXA27x
+	select IWMMXT
+	select PXA25x
+	select PXA_SSP
+
+config MACH_EM_X270
+	bool "CompuLab EM-x270 platform"
+	select PXA27x
+
+config MACH_EXEDA
+	bool "CompuLab eXeda platform"
+	select PXA27x
+
+config MACH_CM_X300
+	bool "CompuLab CM-X300 modules"
+	select PXA3xx
+	select CPU_PXA300
 
 config ARCH_GUMSTIX
 	bool "Gumstix XScale 255 boards"
@@ -62,11 +133,56 @@ config MACH_STARGATE2
 	select IWMMXT
 	select PXA_HAVE_BOARD_IRQS
 
-config ARCH_LUBBOCK
+config MACH_XCEP
-	bool "Intel DBPXA250 Development Platform"
+	bool "Iskratel Electronics XCEP"
 	select PXA25x
-	select SA1111
+	select MTD
-	select PXA_HAVE_BOARD_IRQS
+	select MTD_PARTITIONS
+	select MTD_PHYSMAP
+	select MTD_CFI_INTELEXT
+	select MTD_CFI
+	select MTD_CHAR
+	select SMC91X
+	select PXA_SSP
+	help
+	  PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
+	  Tuned for usage in Libera instruments for particle accelerators.
+
+config TRIZEPS_PXA
+	bool "PXA based Keith und Koep Trizeps DIMM-Modules"
+
+config MACH_TRIZEPS4
+	bool "Keith und Koep Trizeps4 DIMM-Module"
+	depends on TRIZEPS_PXA
+	select TRIZEPS_PCMCIA
+	select PXA27x
+
+config MACH_TRIZEPS4WL
+	bool "Keith und Koep Trizeps4-WL DIMM-Module"
+	depends on TRIZEPS_PXA
+	select TRIZEPS_PCMCIA
+	select PXA27x
+	select PXA_SSP
+
+choice
+	prompt "Select base board for Trizeps module"
+	depends on TRIZEPS_PXA
+
+config MACH_TRIZEPS_CONXS
+	bool "ConXS Eval Board"
+
+config MACH_TRIZEPS_UCONXS
+	bool "uConXS Eval Board"
+
+config MACH_TRIZEPS_ANY
+	bool "another Board"
+
+endchoice
+
+config TRIZEPS_PCMCIA
+	bool
+	help
+	  Enable PCMCIA support for Trizeps modules
 
 config MACH_LOGICPD_PXA270
 	bool "LogicPD PXA270 Card Engine Development Platform"
@@ -74,25 +190,215 @@ config MACH_LOGICPD_PXA270
 	select HAVE_PWM
 	select PXA_HAVE_BOARD_IRQS
 
-config MACH_MAINSTONE
+config MACH_PCM027
-	bool "Intel HCDDBBVA0 Development Platform"
+	bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
 	select PXA27x
+	select IWMMXT
+	select PXA_SSP
+	select PXA_HAVE_BOARD_IRQS
+
+config MACH_PCM990_BASEBOARD
+	bool "PHYTEC PCM-990 development board"
+	select HAVE_PWM
+	depends on MACH_PCM027
+
+choice
+	prompt "display on pcm990"
+	depends on MACH_PCM990_BASEBOARD
+
+config PCM990_DISPLAY_SHARP
+	bool "sharp lq084v1dg21 stn display"
+
+config PCM990_DISPLAY_NEC
+	bool "nec nl6448bc20_18d tft display"
+
+config PCM990_DISPLAY_NONE
+	bool "no display"
+
+endchoice
+
+config MACH_COLIBRI
+	bool "Toradex Colibri PXA270"
+	select PXA27x
+
+config MACH_COLIBRI300
+	bool "Toradex Colibri PXA300/310"
+	select PXA3xx
+	select CPU_PXA300
+	select CPU_PXA310
+	select HAVE_PWM
+
+config MACH_COLIBRI320
+	bool "Toradex Colibri PXA320"
+	select PXA3xx
+	select CPU_PXA320
+
+comment "End-user Products (sorted by vendor name)"
+
+config MACH_H4700
+	bool "HP iPAQ hx4700"
+	select PXA27x
+	select IWMMXT
+	select PXA_SSP
 	select HAVE_PWM
 	select PXA_HAVE_BOARD_IRQS
 
+config MACH_H5000
+	bool "HP iPAQ h5000"
+	select PXA25x
+
+config MACH_HIMALAYA
+	bool "HTC Himalaya Support"
+	select CPU_PXA26x
+	select FB_W100
+
+config MACH_MAGICIAN
+	bool "Enable HTC Magician Support"
+	select PXA27x
+	select IWMMXT
+	select PXA_SSP
+	select HAVE_PWM
+	select PXA_HAVE_BOARD_IRQS
+
+config MACH_MIOA701
+	bool "Mitac Mio A701 Support"
+	select PXA27x
+	select IWMMXT
+	select HAVE_PWM
+	select GPIO_SYSFS
+	help
+	  Say Y here if you intend to run this kernel on a
+	  MIO A701. Currently there is only basic support
+	  for this PDA.
+
+config PXA_EZX
+	bool "Motorola EZX Platform"
+	select PXA27x
+	select IWMMXT
+	select HAVE_PWM
+	select PXA_HAVE_BOARD_IRQS
+
+config MACH_EZX_A780
+	bool "Motorola EZX A780"
+	default y
+	depends on PXA_EZX
+
+config MACH_EZX_E680
+	bool "Motorola EZX E680"
+	default y
+	depends on PXA_EZX
+
+config MACH_EZX_A1200
+	bool "Motorola EZX A1200"
+	default y
+	depends on PXA_EZX
+
+config MACH_EZX_A910
+	bool "Motorola EZX A910"
+	default y
+	depends on PXA_EZX
+
+config MACH_EZX_E6
+	bool "Motorola EZX E6"
+	default y
+	depends on PXA_EZX
+
+config MACH_EZX_E2
+	bool "Motorola EZX E2"
+	default y
+	depends on PXA_EZX
+
 config MACH_MP900C
 	bool "Nec Mobilepro 900/c"
 	select PXA25x
 
-config MACH_BALLOON3
+config ARCH_PXA_PALM
-	bool "Balloon 3 board"
+	bool "PXA based Palm PDAs"
+	select HAVE_PWM
+
+config MACH_PALMTE2
+	bool "Palm Tungsten|E2"
+	default y
+	depends on ARCH_PXA_PALM
+	select PXA25x
+	help
+	  Say Y here if you intend to run this kernel on a Palm Tungsten|E2
+	  handheld computer.
+
+config MACH_PALMTC
+	bool "Palm Tungsten|C"
+	default y
+	depends on ARCH_PXA_PALM
+	select PXA25x
+	help
+	  Say Y here if you intend to run this kernel on a Palm Tungsten|C
+	  handheld computer.
+
+config MACH_PALMT5
+	bool "Palm Tungsten|T5"
+	default y
+	depends on ARCH_PXA_PALM
 	select PXA27x
 	select IWMMXT
-	select PXA_HAVE_BOARD_IRQS
+	help
+	  Say Y here if you intend to run this kernel on a Palm Tungsten|T5
+	  handheld computer.
 
-config ARCH_PXA_IDP
+config MACH_PALMTX
-	bool "Accelent Xscale IDP"
+	bool "Palm T|X"
-	select PXA25x
+	default y
+	depends on ARCH_PXA_PALM
+	select PXA27x
+	select IWMMXT
+	help
+	  Say Y here if you intend to run this kernel on a Palm T|X
+	  handheld computer.
+
+config MACH_PALMZ72
+	bool "Palm Zire 72"
+	default y
+	depends on ARCH_PXA_PALM
+	select PXA27x
+	select IWMMXT
+	help
+	  Say Y here if you intend to run this kernel on Palm Zire 72
+	  handheld computer.
+
+config MACH_PALMLD
+	bool "Palm LifeDrive"
+	default y
+	depends on ARCH_PXA_PALM
+	select PXA27x
+	select IWMMXT
+	help
+	  Say Y here if you intend to run this kernel on a Palm LifeDrive
+	  handheld computer.
+
+config PALM_TREO
+	bool
+	depends on ARCH_PXA_PALM
+
+config MACH_CENTRO
+	bool "Palm Centro 685 (GSM)"
+	default y
+	depends on ARCH_PXA_PALM
+	select PXA27x
+	select IWMMXT
+	select PALM_TREO
+	help
+	  Say Y here if you intend to run this kernel on Palm Centro 685 (GSM)
+	  smartphone.
+
+config MACH_TREO680
+	bool "Palm Treo 680"
+	default y
+	depends on ARCH_PXA_PALM
+	select PXA27x
+	select IWMMXT
+	select PALM_TREO
+	help
+	  Say Y here if you intend to run this kernel on Palm Treo 680
+	  smartphone.
 
 config PXA_SHARPSL
 	bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
@@ -169,15 +475,6 @@ config MACH_TOSA
 	select PXA25x
 	select PXA_HAVE_BOARD_IRQS
 
-config ARCH_VIPER
-	bool "Arcom/Eurotech VIPER SBC"
-	select PXA25x
-	select ISA
-	select I2C_GPIO
-	select HAVE_PWM
-	select PXA_HAVE_BOARD_IRQS
-	select PXA_HAVE_ISA_IRQS
-
 config ARCH_PXA_ESERIES
 	bool "PXA based Toshiba e-series PDAs"
 	select PXA25x
@@ -234,297 +531,6 @@ config MACH_E800
 	  Say Y here if you intend to run this kernel on a Toshiba
 	  e800 family PDA.
 
-config TRIZEPS_PXA
-	bool "PXA based Keith und Koep Trizeps DIMM-Modules"
-
-config MACH_H5000
-	bool "HP iPAQ h5000"
-	select PXA25x
-
-config MACH_TRIZEPS4
-	bool "Keith und Koep Trizeps4 DIMM-Module"
-	depends on TRIZEPS_PXA
-	select TRIZEPS_PCMCIA
-	select PXA27x
-
-config MACH_TRIZEPS4WL
-	bool "Keith und Koep Trizeps4-WL DIMM-Module"
-	depends on TRIZEPS_PXA
-	select TRIZEPS_PCMCIA
-	select PXA27x
-	select PXA_SSP
-
-choice
-	prompt "Select base board for Trizeps module"
-	depends on TRIZEPS_PXA
-
-config MACH_TRIZEPS_CONXS
-	bool "ConXS Eval Board"
-
-config MACH_TRIZEPS_UCONXS
-	bool "uConXS Eval Board"
-
-config MACH_TRIZEPS_ANY
-	bool "another Board"
-
-endchoice
-
-config TRIZEPS_PCMCIA
-	bool
-	help
-	  Enable PCMCIA support for Trizeps modules
-
-config MACH_EM_X270
-	bool "CompuLab EM-x270 platform"
-	select PXA27x
-
-config MACH_EXEDA
-	bool "CompuLab eXeda platform"
-	select PXA27x
-
-config MACH_COLIBRI
-	bool "Toradex Colibri PXA270"
-	select PXA27x
-
-config MACH_COLIBRI300
-	bool "Toradex Colibri PXA300/310"
-	select PXA3xx
-	select CPU_PXA300
-
-config MACH_COLIBRI320
-	bool "Toradex Colibri PXA320"
-	select PXA3xx
-	select CPU_PXA320
-
-config MACH_ZYLONITE
-	bool "PXA3xx Development Platform (aka Zylonite)"
-	select PXA3xx
-	select PXA_SSP
-	select HAVE_PWM
-	select PXA_HAVE_BOARD_IRQS
-
-config MACH_LITTLETON
-	bool "PXA3xx Form Factor Platform (aka Littleton)"
-	select PXA3xx
-	select PXA_SSP
-
-config MACH_TAVOREVB
-	bool "PXA930 Evaluation Board (aka TavorEVB)"
-	select PXA3xx
-	select CPU_PXA930
-
-config MACH_SAAR
-	bool "PXA930 Handheld Platform (aka SAAR)"
-	select PXA3xx
-	select CPU_PXA930
-
-config MACH_ARMCORE
-	bool "CompuLab CM-X255/CM-X270 modules"
-	select PXA27x
-	select IWMMXT
-	select PXA25x
-	select PXA_SSP
-
-config MACH_CM_X300
-	bool "CompuLab CM-X300 modules"
-	select PXA3xx
-	select CPU_PXA300
-
-config MACH_H4700
-	bool "HP iPAQ hx4700"
-	select PXA27x
-	select IWMMXT
-	select PXA_SSP
-	select HAVE_PWM
-	select PXA_HAVE_BOARD_IRQS
-
-config MACH_MAGICIAN
-	bool "Enable HTC Magician Support"
-	select PXA27x
-	select IWMMXT
-	select PXA_SSP
-	select HAVE_PWM
-	select PXA_HAVE_BOARD_IRQS
-
-config MACH_HIMALAYA
-	bool "HTC Himalaya Support"
-	select CPU_PXA26x
-	select FB_W100
-
-config MACH_MIOA701
-	bool "Mitac Mio A701 Support"
-	select PXA27x
-	select IWMMXT
-	select HAVE_PWM
-	select GPIO_SYSFS
-	help
-	  Say Y here if you intend to run this kernel on a
-	  MIO A701. Currently there is only basic support
-	  for this PDA.
-
-config MACH_PCM027
-	bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
-	select PXA27x
-	select IWMMXT
-	select PXA_SSP
-	select PXA_HAVE_BOARD_IRQS
-
-config ARCH_PXA_PALM
-	bool "PXA based Palm PDAs"
-	select HAVE_PWM
-
-config MACH_PALMTE2
-	bool "Palm Tungsten|E2"
-	default y
-	depends on ARCH_PXA_PALM
-	select PXA25x
-	help
-	  Say Y here if you intend to run this kernel on a Palm Tungsten|E2
-	  handheld computer.
-
-config MACH_PALMTC
-	bool "Palm Tungsten|C"
-	default y
-	depends on ARCH_PXA_PALM
-	select PXA25x
-	help
-	  Say Y here if you intend to run this kernel on a Palm Tungsten|C
-	  handheld computer.
-
-config MACH_PALMT5
-	bool "Palm Tungsten|T5"
-	default y
-	depends on ARCH_PXA_PALM
-	select PXA27x
-	select IWMMXT
-	help
-	  Say Y here if you intend to run this kernel on a Palm Tungsten|T5
-	  handheld computer.
-
-config MACH_PALMTX
-	bool "Palm T|X"
-	default y
-	depends on ARCH_PXA_PALM
-	select PXA27x
-	select IWMMXT
-	help
-	  Say Y here if you intend to run this kernel on a Palm T|X
-	  handheld computer.
-
-config MACH_PALMZ72
-	bool "Palm Zire 72"
-	default y
-	depends on ARCH_PXA_PALM
-	select PXA27x
-	select IWMMXT
-	help
-	  Say Y here if you intend to run this kernel on Palm Zire 72
-	  handheld computer.
-
-config MACH_TREO680
-	bool "Palm Treo 680"
-	default y
-	depends on ARCH_PXA_PALM
-	select PXA27x
-	select IWMMXT
-	help
-	  Say Y here if you intend to run this kernel on Palm Treo 680
-	  smartphone.
-
-config MACH_PALMLD
-	bool "Palm LifeDrive"
-	default y
-	depends on ARCH_PXA_PALM
-	select PXA27x
-	select IWMMXT
-	help
-	  Say Y here if you intend to run this kernel on a Palm LifeDrive
-	  handheld computer.
-
-config MACH_PCM990_BASEBOARD
-	bool "PHYTEC PCM-990 development board"
-	select HAVE_PWM
-	depends on MACH_PCM027
-
-choice
-	prompt "display on pcm990"
-	depends on MACH_PCM990_BASEBOARD
-
-config PCM990_DISPLAY_SHARP
-	bool "sharp lq084v1dg21 stn display"
-
-config PCM990_DISPLAY_NEC
-	bool "nec nl6448bc20_18d tft display"
-
-config PCM990_DISPLAY_NONE
-	bool "no display"
-
-endchoice
-
-config MACH_CSB726
-	bool "Enable Cogent CSB726 System On a Module"
-	select PXA27x
-	select IWMMXT
-	help
-	  Say Y here if you intend to run this kernel on a Cogent
-	  CSB726 System On Module.
-
-config CSB726_CSB701
-	bool "Enable supprot for CSB701 baseboard"
-	depends on MACH_CSB726
-
-config PXA_EZX
-	bool "Motorola EZX Platform"
-	select PXA27x
-	select IWMMXT
-	select HAVE_PWM
-	select PXA_HAVE_BOARD_IRQS
-
-config MACH_EZX_A780
-	bool "Motorola EZX A780"
-	default y
-	depends on PXA_EZX
-
-config MACH_EZX_E680
-	bool "Motorola EZX E680"
-	default y
-	depends on PXA_EZX
-
-config MACH_EZX_A1200
-	bool "Motorola EZX A1200"
-	default y
-	depends on PXA_EZX
-
-config MACH_EZX_A910
-	bool "Motorola EZX A910"
-	default y
-	depends on PXA_EZX
-
-config MACH_EZX_E6
-	bool "Motorola EZX E6"
-	default y
-	depends on PXA_EZX
-
-config MACH_EZX_E2
-	bool "Motorola EZX E2"
-	default y
-	depends on PXA_EZX
-
-config MACH_XCEP
-	bool "Iskratel Electronics XCEP"
-	select PXA25x
-	select MTD
-	select MTD_PARTITIONS
-	select MTD_PHYSMAP
-	select MTD_CFI_INTELEXT
-	select MTD_CFI
-	select MTD_CHAR
-	select SMC91X
-	select PXA_SSP
-	help
-	  PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
-	  Tuned for usage in Libera instruments for particle accelerators.
-
 endmenu
 
 config PXA25x
@@ -551,6 +557,42 @@ config PXA3xx
 	help
 	  Select code specific to PXA3xx variants
 
+config CPU_PXA300
+	bool
+	select PXA3xx
+	help
+	  PXA300 (codename Monahans-L)
+
+config CPU_PXA310
+	bool
+	select CPU_PXA300
+	help
+	  PXA310 (codename Monahans-LV)
+
+config CPU_PXA320
+	bool
+	select PXA3xx
+	help
+	  PXA320 (codename Monahans-P)
+
+config CPU_PXA930
+	bool
+	select PXA3xx
+	help
+	  PXA930 (codename Tavor-P)
+
+config CPU_PXA935
+	bool
+	select CPU_PXA930
+	help
+	  PXA935 (codename Tavor-P65)
+
+config CPU_PXA950
+	bool
+	select CPU_PXA930
+	help
+	  PXA950 (codename Tavor-PV2)
+
 config PXA_SHARP_C7xx
 	bool
 	select PXA_SSP

arch/arm/mach-pxa/Makefile

@@ -24,33 +24,63 @@ obj-$(CONFIG_CPU_PXA300)	+= pxa300.o
 obj-$(CONFIG_CPU_PXA320)	+= pxa320.o
 obj-$(CONFIG_CPU_PXA930)	+= pxa930.o
 
-# Specific board support
+# NOTE: keep the order of boards in accordance to their order in Kconfig
+
+# Intel/Marvell Dev Platforms
+obj-$(CONFIG_ARCH_LUBBOCK)	+= lubbock.o
+obj-$(CONFIG_MACH_MAINSTONE)	+= mainstone.o
+obj-$(CONFIG_MACH_ZYLONITE300)	+= zylonite.o zylonite_pxa300.o
+obj-$(CONFIG_MACH_ZYLONITE320)	+= zylonite.o zylonite_pxa320.o
+obj-$(CONFIG_MACH_LITTLETON)	+= littleton.o
+obj-$(CONFIG_MACH_TAVOREVB)	+= tavorevb.o
+obj-$(CONFIG_MACH_SAAR)		+= saar.o
+
+# 3rd Party Dev Platforms
+obj-$(CONFIG_ARCH_PXA_IDP)	+= idp.o
+obj-$(CONFIG_ARCH_VIPER)	+= viper.o
+obj-$(CONFIG_MACH_BALLOON3)	+= balloon3.o
+obj-$(CONFIG_MACH_CSB726)	+= csb726.o
+obj-$(CONFIG_CSB726_CSB701)	+= csb701.o
+obj-$(CONFIG_MACH_ARMCORE)      += cm-x2xx.o cm-x255.o cm-x270.o
+ifeq ($(CONFIG_PCI),y)
+obj-$(CONFIG_MACH_ARMCORE)	+= cm-x2xx-pci.o
+endif
+obj-$(CONFIG_MACH_EM_X270)	+= em-x270.o
+obj-$(CONFIG_MACH_CM_X300)      += cm-x300.o
 obj-$(CONFIG_ARCH_GUMSTIX)	+= gumstix.o
 obj-$(CONFIG_GUMSTIX_AM200EPD)	+= am200epd.o
 obj-$(CONFIG_GUMSTIX_AM300EPD)	+= am300epd.o
-obj-$(CONFIG_ARCH_LUBBOCK)	+= lubbock.o
+obj-$(CONFIG_MACH_INTELMOTE2)   += imote2.o
-obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o
+obj-$(CONFIG_MACH_STARGATE2)	+= stargate2.o
-obj-$(CONFIG_MACH_MAINSTONE)	+= mainstone.o
+obj-$(CONFIG_MACH_XCEP)         += xcep.o
-obj-$(CONFIG_MACH_BALLOON3)	+= balloon3.o
-obj-$(CONFIG_MACH_MP900C)	+= mp900.o
-obj-$(CONFIG_ARCH_PXA_IDP)	+= idp.o
 obj-$(CONFIG_MACH_TRIZEPS4)	+= trizeps4.o
+obj-$(CONFIG_MACH_LOGICPD_PXA270)	+= lpd270.o
+obj-$(CONFIG_MACH_PCM027)		+= pcm027.o
+obj-$(CONFIG_MACH_PCM990_BASEBOARD)	+= pcm990-baseboard.o
 obj-$(CONFIG_MACH_COLIBRI)	+= colibri-pxa270.o
 obj-$(CONFIG_MACH_COLIBRI300)	+= colibri-pxa3xx.o colibri-pxa300.o
 obj-$(CONFIG_MACH_COLIBRI320)	+= colibri-pxa3xx.o colibri-pxa320.o
+
+# End-user Products
+obj-$(CONFIG_MACH_H4700)	+= hx4700.o
 obj-$(CONFIG_MACH_H5000)	+= h5000.o
+obj-$(CONFIG_MACH_HIMALAYA)	+= himalaya.o
+obj-$(CONFIG_MACH_MAGICIAN)	+= magician.o
+obj-$(CONFIG_MACH_MIOA701)	+= mioa701.o mioa701_bootresume.o
+obj-$(CONFIG_PXA_EZX)           += ezx.o
+obj-$(CONFIG_MACH_MP900C)	+= mp900.o
+obj-$(CONFIG_MACH_PALMTE2)	+= palmte2.o
+obj-$(CONFIG_MACH_PALMTC)	+= palmtc.o
+obj-$(CONFIG_MACH_PALMT5)	+= palmt5.o
+obj-$(CONFIG_MACH_PALMTX)	+= palmtx.o
+obj-$(CONFIG_MACH_PALMZ72)	+= palmz72.o
+obj-$(CONFIG_MACH_PALMLD)	+= palmld.o
+obj-$(CONFIG_PALM_TREO)		+= palmtreo.o
 obj-$(CONFIG_PXA_SHARP_C7xx)	+= corgi.o sharpsl_pm.o corgi_pm.o
 obj-$(CONFIG_PXA_SHARP_Cxx00)	+= spitz.o sharpsl_pm.o spitz_pm.o
 obj-$(CONFIG_CORGI_SSP_DEPRECATED)	+= corgi_ssp.o corgi_lcd.o
 obj-$(CONFIG_MACH_POODLE)	+= poodle.o
-obj-$(CONFIG_MACH_PCM027)	+= pcm027.o
-obj-$(CONFIG_MACH_PCM990_BASEBOARD)	+= pcm990-baseboard.o
 obj-$(CONFIG_MACH_TOSA)		+= tosa.o
-obj-$(CONFIG_MACH_EM_X270)	+= em-x270.o
-obj-$(CONFIG_MACH_H4700)	+= hx4700.o
-obj-$(CONFIG_MACH_MAGICIAN)	+= magician.o
-obj-$(CONFIG_MACH_HIMALAYA)	+= himalaya.o
-obj-$(CONFIG_MACH_MIOA701)	+= mioa701.o mioa701_bootresume.o
 obj-$(CONFIG_ARCH_PXA_ESERIES)	+= eseries.o
 obj-$(CONFIG_MACH_E330)		+= e330.o
 obj-$(CONFIG_MACH_E350)		+= e350.o
@@ -58,34 +88,6 @@ obj-$(CONFIG_MACH_E740)		+= e740.o
 obj-$(CONFIG_MACH_E750)		+= e750.o
 obj-$(CONFIG_MACH_E400)		+= e400.o
 obj-$(CONFIG_MACH_E800)		+= e800.o
-obj-$(CONFIG_MACH_PALMTE2)	+= palmte2.o
-obj-$(CONFIG_MACH_PALMTC)	+= palmtc.o
-obj-$(CONFIG_MACH_PALMT5)	+= palmt5.o
-obj-$(CONFIG_MACH_PALMTX)	+= palmtx.o
-obj-$(CONFIG_MACH_PALMLD)	+= palmld.o
-obj-$(CONFIG_MACH_PALMZ72)	+= palmz72.o
-obj-$(CONFIG_MACH_TREO680)	+= treo680.o
-obj-$(CONFIG_ARCH_VIPER)	+= viper.o
-
-ifeq ($(CONFIG_MACH_ZYLONITE),y)
-  obj-y				+= zylonite.o
-  obj-$(CONFIG_CPU_PXA300)	+= zylonite_pxa300.o
-  obj-$(CONFIG_CPU_PXA320)	+= zylonite_pxa320.o
-endif
-obj-$(CONFIG_MACH_LITTLETON)	+= littleton.o
-obj-$(CONFIG_MACH_TAVOREVB)	+= tavorevb.o
-obj-$(CONFIG_MACH_SAAR)		+= saar.o
-
-obj-$(CONFIG_MACH_ARMCORE)      += cm-x2xx.o cm-x255.o cm-x270.o
-obj-$(CONFIG_MACH_CM_X300)      += cm-x300.o
-obj-$(CONFIG_PXA_EZX)           += ezx.o
-
-obj-$(CONFIG_MACH_XCEP)         += xcep.o
-
-obj-$(CONFIG_MACH_INTELMOTE2)   += imote2.o
-obj-$(CONFIG_MACH_STARGATE2)	+= stargate2.o
-obj-$(CONFIG_MACH_CSB726)	+= csb726.o
-obj-$(CONFIG_CSB726_CSB701)	+= csb701.o
 
 # Support for blinky lights
 led-y := leds.o
@@ -95,8 +97,4 @@ led-$(CONFIG_ARCH_PXA_IDP)	+= leds-idp.o
 
 obj-$(CONFIG_LEDS)		+= $(led-y)
 
-ifeq ($(CONFIG_PCI),y)
-obj-$(CONFIG_MACH_ARMCORE) += cm-x2xx-pci.o
-endif
-
 obj-$(CONFIG_TOSA_BT)		+= tosa-bt.o

arch/arm/mach-pxa/balloon3.c

@@ -306,6 +306,10 @@ static void __init balloon3_init(void)
 	 */
 	ARB_CNTRL = ARB_CORE_PARK | 0x234;
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	pxa_set_i2c_info(NULL);
 	if (balloon3_has(BALLOON3_FEATURE_AUDIO))
 		pxa_set_ac97_info(NULL);

arch/arm/mach-pxa/cm-x2xx.c

@@ -453,6 +453,10 @@ static inline void cmx2xx_init_ac97(void) {}
 
 static void __init cmx2xx_init(void)
 {
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	cmx2xx_pm_init();
 
 	if (cpu_is_pxa25x())

arch/arm/mach-pxa/cm-x300.c

@@ -3,9 +3,10 @@
  *
  * Support for the CompuLab CM-X300 modules
  *
- * Copyright (C) 2008 CompuLab Ltd.
+ * Copyright (C) 2008,2009 CompuLab Ltd.
  *
  * Mike Rapoport <mike@compulab.co.il>
+ * Igor Grinberg <grinberg@compulab.co.il>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -16,30 +17,41 @@
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
 #include <linux/init.h>
+#include <linux/delay.h>
 #include <linux/platform_device.h>
 
 #include <linux/gpio.h>
 #include <linux/dm9000.h>
 #include <linux/leds.h>
 #include <linux/rtc-v3020.h>
+#include <linux/pwm_backlight.h>
 
 #include <linux/i2c.h>
 #include <linux/i2c/pca953x.h>
 
+#include <linux/mfd/da903x.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_gpio.h>
+#include <linux/spi/tdo24m.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/setup.h>
 
 #include <mach/pxa300.h>
+#include <mach/pxa27x-udc.h>
 #include <mach/pxafb.h>
 #include <mach/mmc.h>
 #include <mach/ohci.h>
 #include <plat/i2c.h>
-#include <mach/pxa3xx_nand.h>
+#include <plat/pxa3xx_nand.h>
+#include <mach/audio.h>
 
 #include <asm/mach/map.h>
 
 #include "generic.h"
+#include "devices.h"
 
 #define CM_X300_ETH_PHYS	0x08000010
 
@@ -53,7 +65,7 @@
 #define GPIO97_RTC_RD		(97)
 #define GPIO98_RTC_IO		(98)
 
-static mfp_cfg_t cm_x300_mfp_cfg[] __initdata = {
+static mfp_cfg_t cm_x3xx_mfp_cfg[] __initdata = {
 	/* LCD */
 	GPIO54_LCD_LDD_0,
 	GPIO55_LCD_LDD_1,
@@ -137,7 +149,6 @@ static mfp_cfg_t cm_x300_mfp_cfg[] __initdata = {
 	GPIO36_UART1_DTR,
 
 	/* GPIOs */
-	GPIO79_GPIO,			/* LED */
 	GPIO82_GPIO | MFP_PULL_HIGH,	/* MMC CD */
 	GPIO85_GPIO,			/* MMC WP */
 	GPIO99_GPIO,			/* Ethernet IRQ */
@@ -151,6 +162,50 @@ static mfp_cfg_t cm_x300_mfp_cfg[] __initdata = {
 	/* Standard I2C */
 	GPIO21_I2C_SCL,
 	GPIO22_I2C_SDA,
+
+	/* PWM Backlight */
+	GPIO19_PWM2_OUT,
+};
+
+static mfp_cfg_t cm_x3xx_rev_lt130_mfp_cfg[] __initdata = {
+	/* GPIOs */
+	GPIO79_GPIO,			/* LED */
+	GPIO77_GPIO,			/* WiFi reset */
+	GPIO78_GPIO,			/* BT reset */
+};
+
+static mfp_cfg_t cm_x3xx_rev_ge130_mfp_cfg[] __initdata = {
+	/* GPIOs */
+	GPIO76_GPIO,			/* LED */
+	GPIO71_GPIO,			/* WiFi reset */
+	GPIO70_GPIO,			/* BT reset */
+};
+
+static mfp_cfg_t cm_x310_mfp_cfg[] __initdata = {
+	/* USB PORT 2 */
+	ULPI_STP,
+	ULPI_NXT,
+	ULPI_DIR,
+	GPIO30_ULPI_DATA_OUT_0,
+	GPIO31_ULPI_DATA_OUT_1,
+	GPIO32_ULPI_DATA_OUT_2,
+	GPIO33_ULPI_DATA_OUT_3,
+	GPIO34_ULPI_DATA_OUT_4,
+	GPIO35_ULPI_DATA_OUT_5,
+	GPIO36_ULPI_DATA_OUT_6,
+	GPIO37_ULPI_DATA_OUT_7,
+	GPIO38_ULPI_CLK,
+	/* external PHY reset pin */
+	GPIO127_GPIO,
+
+	/* USB PORT 3 */
+	GPIO77_USB_P3_1,
+	GPIO78_USB_P3_2,
+	GPIO79_USB_P3_3,
+	GPIO80_USB_P3_4,
+	GPIO81_USB_P3_5,
+	GPIO82_USB_P3_6,
+	GPIO0_2_USBH_PEN,
 };
 
 #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
@@ -195,17 +250,18 @@ static void __init cm_x300_init_dm9000(void)
 static inline void cm_x300_init_dm9000(void) {}
 #endif
 
+/* LCD */
 #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
 static struct pxafb_mode_info cm_x300_lcd_modes[] = {
 	[0] = {
-		.pixclock	= 38000,
+		.pixclock	= 38250,
 		.bpp		= 16,
 		.xres		= 480,
 		.yres		= 640,
 		.hsync_len	= 8,
 		.vsync_len	= 2,
 		.left_margin	= 8,
-		.upper_margin	= 0,
+		.upper_margin	= 2,
 		.right_margin	= 24,
 		.lower_margin	= 4,
 		.cmap_greyscale	= 0,
@@ -227,7 +283,7 @@ static struct pxafb_mode_info cm_x300_lcd_modes[] = {
 
 static struct pxafb_mach_info cm_x300_lcd = {
 	.modes			= cm_x300_lcd_modes,
-	.num_modes		= 2,
+	.num_modes		= ARRAY_SIZE(cm_x300_lcd_modes),
 	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
 };
 
@@ -239,6 +295,87 @@ static void __init cm_x300_init_lcd(void)
 static inline void cm_x300_init_lcd(void) {}
 #endif
 
+#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
+static struct platform_pwm_backlight_data cm_x300_backlight_data = {
+	.pwm_id		= 2,
+	.max_brightness	= 100,
+	.dft_brightness	= 100,
+	.pwm_period_ns	= 10000,
+};
+
+static struct platform_device cm_x300_backlight_device = {
+	.name		= "pwm-backlight",
+	.dev		= {
+		.parent = &pxa27x_device_pwm0.dev,
+		.platform_data	= &cm_x300_backlight_data,
+	},
+};
+
+static void cm_x300_init_bl(void)
+{
+	platform_device_register(&cm_x300_backlight_device);
+}
+#else
+static inline void cm_x300_init_bl(void) {}
+#endif
+
+#if defined(CONFIG_SPI_GPIO) || defined(CONFIG_SPI_GPIO_MODULE)
+#define GPIO_LCD_BASE	(144)
+#define GPIO_LCD_DIN	(GPIO_LCD_BASE + 8)	/* aux_gpio3_0 */
+#define GPIO_LCD_DOUT	(GPIO_LCD_BASE + 9)	/* aux_gpio3_1 */
+#define GPIO_LCD_SCL	(GPIO_LCD_BASE + 10)	/* aux_gpio3_2 */
+#define GPIO_LCD_CS	(GPIO_LCD_BASE + 11)	/* aux_gpio3_3 */
+#define LCD_SPI_BUS_NUM	(1)
+
+static struct spi_gpio_platform_data cm_x300_spi_gpio_pdata = {
+	.sck		= GPIO_LCD_SCL,
+	.mosi		= GPIO_LCD_DIN,
+	.miso		= GPIO_LCD_DOUT,
+	.num_chipselect	= 1,
+};
+
+static struct platform_device cm_x300_spi_gpio = {
+	.name		= "spi_gpio",
+	.id		= LCD_SPI_BUS_NUM,
+	.dev		= {
+		.platform_data	= &cm_x300_spi_gpio_pdata,
+	},
+};
+
+static struct tdo24m_platform_data cm_x300_tdo24m_pdata = {
+	.model = TDO35S,
+};
+
+static struct spi_board_info cm_x300_spi_devices[] __initdata = {
+	{
+		.modalias		= "tdo24m",
+		.max_speed_hz		= 1000000,
+		.bus_num		= LCD_SPI_BUS_NUM,
+		.chip_select		= 0,
+		.controller_data	= (void *) GPIO_LCD_CS,
+		.platform_data		= &cm_x300_tdo24m_pdata,
+	},
+};
+
+static void __init cm_x300_init_spi(void)
+{
+	spi_register_board_info(cm_x300_spi_devices,
+				ARRAY_SIZE(cm_x300_spi_devices));
+	platform_device_register(&cm_x300_spi_gpio);
+}
+#else
+static inline void cm_x300_init_spi(void) {}
+#endif
+
+#if defined(CONFIG_SND_PXA2XX_LIB_AC97)
+static void __init cm_x300_init_ac97(void)
+{
+	pxa_set_ac97_info(NULL);
+}
+#else
+static inline void cm_x300_init_ac97(void) {}
+#endif
+
 #if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
 static struct mtd_partition cm_x300_nand_partitions[] = {
 	[0] = {
@@ -333,9 +470,19 @@ static inline void cm_x300_init_mmc(void) {}
 #endif
 
 #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static int cm_x300_ohci_init(struct device *dev)
+{
+	if (cpu_is_pxa300())
+		UP2OCR = UP2OCR_HXS
+			| UP2OCR_HXOE | UP2OCR_DMPDE | UP2OCR_DPPDE;
+
+	return 0;
+}
+
 static struct pxaohci_platform_data cm_x300_ohci_platform_data = {
 	.port_mode	= PMM_PERPORT_MODE,
-	.flags		= ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW,
+	.flags		= ENABLE_PORT_ALL | POWER_CONTROL_LOW,
+	.init		= cm_x300_ohci_init,
 };
 
 static void __init cm_x300_init_ohci(void)
@@ -351,7 +498,6 @@ static struct gpio_led cm_x300_leds[] = {
 	[0] = {
 		.name = "cm-x300:green",
 		.default_trigger = "heartbeat",
-		.gpio = 79,
 		.active_low = 1,
 	},
 };
@@ -371,6 +517,11 @@ static struct platform_device cm_x300_led_device = {
 
 static void __init cm_x300_init_leds(void)
 {
+	if (system_rev < 130)
+		cm_x300_leds[0].gpio = 79;
+	else
+		cm_x300_leds[0].gpio = 76;
+
 	platform_device_register(&cm_x300_led_device);
 }
 #else
@@ -433,11 +584,94 @@ static void __init cm_x300_init_rtc(void)
 static inline void cm_x300_init_rtc(void) {}
 #endif
 
-static void __init cm_x300_init(void)
+/* DA9030 */
+struct da903x_subdev_info cm_x300_da9030_subdevs[] = {
+	{
+		.name = "da903x-backlight",
+		.id = DA9030_ID_WLED,
+	}
+};
+
+static struct da903x_platform_data cm_x300_da9030_info = {
+	.num_subdevs = ARRAY_SIZE(cm_x300_da9030_subdevs),
+	.subdevs = cm_x300_da9030_subdevs,
+};
+
+static struct i2c_board_info cm_x300_pmic_info = {
+	I2C_BOARD_INFO("da9030", 0x49),
+	.irq = IRQ_GPIO(0),
+	.platform_data = &cm_x300_da9030_info,
+};
+
+static struct i2c_pxa_platform_data cm_x300_pwr_i2c_info = {
+	.use_pio = 1,
+};
+
+static void __init cm_x300_init_da9030(void)
+{
+	pxa3xx_set_i2c_power_info(&cm_x300_pwr_i2c_info);
+	i2c_register_board_info(1, &cm_x300_pmic_info, 1);
+}
+
+static void __init cm_x300_init_wi2wi(void)
+{
+	int bt_reset, wlan_en;
+	int err;
+
+	if (system_rev < 130) {
+		wlan_en = 77;
+		bt_reset = 78;
+	} else {
+		wlan_en = 71;
+		bt_reset = 70;
+	}
+
+	/* Libertas and CSR reset */
+	err = gpio_request(wlan_en, "wlan en");
+	if (err) {
+		pr_err("CM-X300: failed to request wlan en gpio: %d\n", err);
+	} else {
+		gpio_direction_output(wlan_en, 1);
+		gpio_free(wlan_en);
+	}
+
+	err = gpio_request(bt_reset, "bt reset");
+	if (err) {
+		pr_err("CM-X300: failed to request bt reset gpio: %d\n", err);
+	} else {
+		gpio_direction_output(bt_reset, 1);
+		udelay(10);
+		gpio_set_value(bt_reset, 0);
+		udelay(10);
+		gpio_set_value(bt_reset, 1);
+		gpio_free(bt_reset);
+	}
+}
+
+/* MFP */
+static void __init cm_x300_init_mfp(void)
 {
 	/* board-processor specific GPIO initialization */
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x300_mfp_cfg));
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x3xx_mfp_cfg));
 
+	if (system_rev < 130)
+		pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x3xx_rev_lt130_mfp_cfg));
+	else
+		pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x3xx_rev_ge130_mfp_cfg));
+
+	if (cpu_is_pxa310())
+		pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x310_mfp_cfg));
+}
+
+static void __init cm_x300_init(void)
+{
+	cm_x300_init_mfp();
+
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
+	cm_x300_init_da9030();
 	cm_x300_init_dm9000();
 	cm_x300_init_lcd();
 	cm_x300_init_ohci();
@@ -445,7 +679,11 @@ static void __init cm_x300_init(void)
 	cm_x300_init_nand();
 	cm_x300_init_leds();
 	cm_x300_init_i2c();
+	cm_x300_init_spi();
 	cm_x300_init_rtc();
+	cm_x300_init_ac97();
+	cm_x300_init_wi2wi();
+	cm_x300_init_bl();
 }
 
 static void __init cm_x300_fixup(struct machine_desc *mdesc, struct tag *tags,