docs: Add Generic Counter interface documentation
This patch adds high-level documentation about the Generic Counter interface. Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
parent
ea2b23b895
commit
09e7d4ed89
342
Documentation/driver-api/generic-counter.rst
Normal file
342
Documentation/driver-api/generic-counter.rst
Normal file
|
@ -0,0 +1,342 @@
|
|||
.. SPDX-License-Identifier: GPL-2.0
|
||||
|
||||
=========================
|
||||
Generic Counter Interface
|
||||
=========================
|
||||
|
||||
Introduction
|
||||
============
|
||||
|
||||
Counter devices are prevalent within a diverse spectrum of industries.
|
||||
The ubiquitous presence of these devices necessitates a common interface
|
||||
and standard of interaction and exposure. This driver API attempts to
|
||||
resolve the issue of duplicate code found among existing counter device
|
||||
drivers by introducing a generic counter interface for consumption. The
|
||||
Generic Counter interface enables drivers to support and expose a common
|
||||
set of components and functionality present in counter devices.
|
||||
|
||||
Theory
|
||||
======
|
||||
|
||||
Counter devices can vary greatly in design, but regardless of whether
|
||||
some devices are quadrature encoder counters or tally counters, all
|
||||
counter devices consist of a core set of components. This core set of
|
||||
components, shared by all counter devices, is what forms the essence of
|
||||
the Generic Counter interface.
|
||||
|
||||
There are three core components to a counter:
|
||||
|
||||
* Count:
|
||||
Count data for a set of Signals.
|
||||
|
||||
* Signal:
|
||||
Input data that is evaluated by the counter to determine the count
|
||||
data.
|
||||
|
||||
* Synapse:
|
||||
The association of a Signal with a respective Count.
|
||||
|
||||
COUNT
|
||||
-----
|
||||
A Count represents the count data for a set of Signals. The Generic
|
||||
Counter interface provides the following available count data types:
|
||||
|
||||
* COUNT_POSITION:
|
||||
Unsigned integer value representing position.
|
||||
|
||||
A Count has a count function mode which represents the update behavior
|
||||
for the count data. The Generic Counter interface provides the following
|
||||
available count function modes:
|
||||
|
||||
* Increase:
|
||||
Accumulated count is incremented.
|
||||
|
||||
* Decrease:
|
||||
Accumulated count is decremented.
|
||||
|
||||
* Pulse-Direction:
|
||||
Rising edges on signal A updates the respective count. The input level
|
||||
of signal B determines direction.
|
||||
|
||||
* Quadrature:
|
||||
A pair of quadrature encoding signals are evaluated to determine
|
||||
position and direction. The following Quadrature modes are available:
|
||||
|
||||
- x1 A:
|
||||
If direction is forward, rising edges on quadrature pair signal A
|
||||
updates the respective count; if the direction is backward, falling
|
||||
edges on quadrature pair signal A updates the respective count.
|
||||
Quadrature encoding determines the direction.
|
||||
|
||||
- x1 B:
|
||||
If direction is forward, rising edges on quadrature pair signal B
|
||||
updates the respective count; if the direction is backward, falling
|
||||
edges on quadrature pair signal B updates the respective count.
|
||||
Quadrature encoding determines the direction.
|
||||
|
||||
- x2 A:
|
||||
Any state transition on quadrature pair signal A updates the
|
||||
respective count. Quadrature encoding determines the direction.
|
||||
|
||||
- x2 B:
|
||||
Any state transition on quadrature pair signal B updates the
|
||||
respective count. Quadrature encoding determines the direction.
|
||||
|
||||
- x4:
|
||||
Any state transition on either quadrature pair signals updates the
|
||||
respective count. Quadrature encoding determines the direction.
|
||||
|
||||
A Count has a set of one or more associated Signals.
|
||||
|
||||
SIGNAL
|
||||
------
|
||||
A Signal represents a counter input data; this is the input data that is
|
||||
evaluated by the counter to determine the count data; e.g. a quadrature
|
||||
signal output line of a rotary encoder. Not all counter devices provide
|
||||
user access to the Signal data.
|
||||
|
||||
The Generic Counter interface provides the following available signal
|
||||
data types for when the Signal data is available for user access:
|
||||
|
||||
* SIGNAL_LEVEL:
|
||||
Signal line state level. The following states are possible:
|
||||
|
||||
- SIGNAL_LEVEL_LOW:
|
||||
Signal line is in a low state.
|
||||
|
||||
- SIGNAL_LEVEL_HIGH:
|
||||
Signal line is in a high state.
|
||||
|
||||
A Signal may be associated with one or more Counts.
|
||||
|
||||
SYNAPSE
|
||||
-------
|
||||
A Synapse represents the association of a Signal with a respective
|
||||
Count. Signal data affects respective Count data, and the Synapse
|
||||
represents this relationship.
|
||||
|
||||
The Synapse action mode specifies the Signal data condition which
|
||||
triggers the respective Count's count function evaluation to update the
|
||||
count data. The Generic Counter interface provides the following
|
||||
available action modes:
|
||||
|
||||
* None:
|
||||
Signal does not trigger the count function. In Pulse-Direction count
|
||||
function mode, this Signal is evaluated as Direction.
|
||||
|
||||
* Rising Edge:
|
||||
Low state transitions to high state.
|
||||
|
||||
* Falling Edge:
|
||||
High state transitions to low state.
|
||||
|
||||
* Both Edges:
|
||||
Any state transition.
|
||||
|
||||
A counter is defined as a set of input signals associated with count
|
||||
data that are generated by the evaluation of the state of the associated
|
||||
input signals as defined by the respective count functions. Within the
|
||||
context of the Generic Counter interface, a counter consists of Counts
|
||||
each associated with a set of Signals, whose respective Synapse
|
||||
instances represent the count function update conditions for the
|
||||
associated Counts.
|
||||
|
||||
Paradigm
|
||||
========
|
||||
|
||||
The most basic counter device may be expressed as a single Count
|
||||
associated with a single Signal via a single Synapse. Take for example
|
||||
a counter device which simply accumulates a count of rising edges on a
|
||||
source input line::
|
||||
|
||||
Count Synapse Signal
|
||||
----- ------- ------
|
||||
+---------------------+
|
||||
| Data: Count | Rising Edge ________
|
||||
| Function: Increase | <------------- / Source \
|
||||
| | ____________
|
||||
+---------------------+
|
||||
|
||||
In this example, the Signal is a source input line with a pulsing
|
||||
voltage, while the Count is a persistent count value which is repeatedly
|
||||
incremented. The Signal is associated with the respective Count via a
|
||||
Synapse. The increase function is triggered by the Signal data condition
|
||||
specified by the Synapse -- in this case a rising edge condition on the
|
||||
voltage input line. In summary, the counter device existence and
|
||||
behavior is aptly represented by respective Count, Signal, and Synapse
|
||||
components: a rising edge condition triggers an increase function on an
|
||||
accumulating count datum.
|
||||
|
||||
A counter device is not limited to a single Signal; in fact, in theory
|
||||
many Signals may be associated with even a single Count. For example, a
|
||||
quadrature encoder counter device can keep track of position based on
|
||||
the states of two input lines::
|
||||
|
||||
Count Synapse Signal
|
||||
----- ------- ------
|
||||
+-------------------------+
|
||||
| Data: Position | Both Edges ___
|
||||
| Function: Quadrature x4 | <------------ / A \
|
||||
| | _______
|
||||
| |
|
||||
| | Both Edges ___
|
||||
| | <------------ / B \
|
||||
| | _______
|
||||
+-------------------------+
|
||||
|
||||
In this example, two Signals (quadrature encoder lines A and B) are
|
||||
associated with a single Count: a rising or falling edge on either A or
|
||||
B triggers the "Quadrature x4" function which determines the direction
|
||||
of movement and updates the respective position data. The "Quadrature
|
||||
x4" function is likely implemented in the hardware of the quadrature
|
||||
encoder counter device; the Count, Signals, and Synapses simply
|
||||
represent this hardware behavior and functionality.
|
||||
|
||||
Signals associated with the same Count can have differing Synapse action
|
||||
mode conditions. For example, a quadrature encoder counter device
|
||||
operating in a non-quadrature Pulse-Direction mode could have one input
|
||||
line dedicated for movement and a second input line dedicated for
|
||||
direction::
|
||||
|
||||
Count Synapse Signal
|
||||
----- ------- ------
|
||||
+---------------------------+
|
||||
| Data: Position | Rising Edge ___
|
||||
| Function: Pulse-Direction | <------------- / A \ (Movement)
|
||||
| | _______
|
||||
| |
|
||||
| | None ___
|
||||
| | <------------- / B \ (Direction)
|
||||
| | _______
|
||||
+---------------------------+
|
||||
|
||||
Only Signal A triggers the "Pulse-Direction" update function, but the
|
||||
instantaneous state of Signal B is still required in order to know the
|
||||
direction so that the position data may be properly updated. Ultimately,
|
||||
both Signals are associated with the same Count via two respective
|
||||
Synapses, but only one Synapse has an active action mode condition which
|
||||
triggers the respective count function while the other is left with a
|
||||
"None" condition action mode to indicate its respective Signal's
|
||||
availability for state evaluation despite its non-triggering mode.
|
||||
|
||||
Keep in mind that the Signal, Synapse, and Count are abstract
|
||||
representations which do not need to be closely married to their
|
||||
respective physical sources. This allows the user of a counter to
|
||||
divorce themselves from the nuances of physical components (such as
|
||||
whether an input line is differential or single-ended) and instead focus
|
||||
on the core idea of what the data and process represent (e.g. position
|
||||
as interpreted from quadrature encoding data).
|
||||
|
||||
Userspace Interface
|
||||
===================
|
||||
|
||||
Several sysfs attributes are generated by the Generic Counter interface,
|
||||
and reside under the /sys/bus/counter/devices/counterX directory, where
|
||||
counterX refers to the respective counter device. Please see
|
||||
Documentation/ABI/testing/sys-bus-counter-generic-sysfs for detailed
|
||||
information on each Generic Counter interface sysfs attribute.
|
||||
|
||||
Through these sysfs attributes, programs and scripts may interact with
|
||||
the Generic Counter paradigm Counts, Signals, and Synapses of respective
|
||||
counter devices.
|
||||
|
||||
Driver API
|
||||
==========
|
||||
|
||||
Driver authors may utilize the Generic Counter interface in their code
|
||||
by including the include/linux/counter.h header file. This header file
|
||||
provides several core data structures, function prototypes, and macros
|
||||
for defining a counter device.
|
||||
|
||||
.. kernel-doc:: include/linux/counter.h
|
||||
:internal:
|
||||
|
||||
.. kernel-doc:: drivers/counter/generic-counter.c
|
||||
:export:
|
||||
|
||||
Implementation
|
||||
==============
|
||||
|
||||
To support a counter device, a driver must first allocate the available
|
||||
Counter Signals via counter_signal structures. These Signals should
|
||||
be stored as an array and set to the signals array member of an
|
||||
allocated counter_device structure before the Counter is registered to
|
||||
the system.
|
||||
|
||||
Counter Counts may be allocated via counter_count structures, and
|
||||
respective Counter Signal associations (Synapses) made via
|
||||
counter_synapse structures. Associated counter_synapse structures are
|
||||
stored as an array and set to the the synapses array member of the
|
||||
respective counter_count structure. These counter_count structures are
|
||||
set to the counts array member of an allocated counter_device structure
|
||||
before the Counter is registered to the system.
|
||||
|
||||
Driver callbacks should be provided to the counter_device structure via
|
||||
a constant counter_ops structure in order to communicate with the
|
||||
device: to read and write various Signals and Counts, and to set and get
|
||||
the "action mode" and "function mode" for various Synapses and Counts
|
||||
respectively.
|
||||
|
||||
A defined counter_device structure may be registered to the system by
|
||||
passing it to the counter_register function, and unregistered by passing
|
||||
it to the counter_unregister function. Similarly, the
|
||||
devm_counter_register and devm_counter_unregister functions may be used
|
||||
if device memory-managed registration is desired.
|
||||
|
||||
Extension sysfs attributes can be created for auxiliary functionality
|
||||
and data by passing in defined counter_device_ext, counter_count_ext,
|
||||
and counter_signal_ext structures. In these cases, the
|
||||
counter_device_ext structure is used for global configuration of the
|
||||
respective Counter device, while the counter_count_ext and
|
||||
counter_signal_ext structures allow for auxiliary exposure and
|
||||
configuration of a specific Count or Signal respectively.
|
||||
|
||||
Architecture
|
||||
============
|
||||
|
||||
When the Generic Counter interface counter module is loaded, the
|
||||
counter_init function is called which registers a bus_type named
|
||||
"counter" to the system. Subsequently, when the module is unloaded, the
|
||||
counter_exit function is called which unregisters the bus_type named
|
||||
"counter" from the system.
|
||||
|
||||
Counter devices are registered to the system via the counter_register
|
||||
function, and later removed via the counter_unregister function. The
|
||||
counter_register function establishes a unique ID for the Counter
|
||||
device and creates a respective sysfs directory, where X is the
|
||||
mentioned unique ID:
|
||||
|
||||
/sys/bus/counter/devices/counterX
|
||||
|
||||
Sysfs attributes are created within the counterX directory to expose
|
||||
functionality, configurations, and data relating to the Counts, Signals,
|
||||
and Synapses of the Counter device, as well as options and information
|
||||
for the Counter device itself.
|
||||
|
||||
Each Signal has a directory created to house its relevant sysfs
|
||||
attributes, where Y is the unique ID of the respective Signal:
|
||||
|
||||
/sys/bus/counter/devices/counterX/signalY
|
||||
|
||||
Similarly, each Count has a directory created to house its relevant
|
||||
sysfs attributes, where Y is the unique ID of the respective Count:
|
||||
|
||||
/sys/bus/counter/devices/counterX/countY
|
||||
|
||||
For a more detailed breakdown of the available Generic Counter interface
|
||||
sysfs attributes, please refer to the
|
||||
Documentation/ABI/testing/sys-bus-counter file.
|
||||
|
||||
The Signals and Counts associated with the Counter device are registered
|
||||
to the system as well by the counter_register function. The
|
||||
signal_read/signal_write driver callbacks are associated with their
|
||||
respective Signal attributes, while the count_read/count_write and
|
||||
function_get/function_set driver callbacks are associated with their
|
||||
respective Count attributes; similarly, the same is true for the
|
||||
action_get/action_set driver callbacks and their respective Synapse
|
||||
attributes. If a driver callback is left undefined, then the respective
|
||||
read/write permission is left disabled for the relevant attributes.
|
||||
|
||||
Similarly, extension sysfs attributes are created for the defined
|
||||
counter_device_ext, counter_count_ext, and counter_signal_ext
|
||||
structures that are passed in.
|
|
@ -56,6 +56,7 @@ available subsections can be seen below.
|
|||
slimbus
|
||||
soundwire/index
|
||||
fpga/index
|
||||
generic-counter
|
||||
|
||||
.. only:: subproject and html
|
||||
|
||||
|
|
|
@ -4059,6 +4059,7 @@ M: William Breathitt Gray <vilhelm.gray@gmail.com>
|
|||
L: linux-iio@vger.kernel.org
|
||||
S: Maintained
|
||||
F: Documentation/ABI/testing/sysfs-bus-counter*
|
||||
F: Documentation/driver-api/generic-counter.rst
|
||||
F: drivers/counter/
|
||||
F: include/linux/counter.h
|
||||
F: include/linux/counter_enum.h
|
||||
|
|
Loading…
Reference in a new issue