redonkable/remarkable-linux
redonkable/remarkable-linux
1
0
Fork 0
Code Releases Activity

CRIS: Better handling of pinmux settings

Browse source 
Depending on eth, eth_mido and geth fields in wr_hwprot, don't set
corresponding pins on gpio port b to gpio mode. This avoids
re-resetting the ethernet PHY should this already have been done.

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
This commit is contained in:
Jesper Nilsson 2010-08-04 11:03:57 +02:00
parent 6f09963caf
commit 0c07d3abc8
1 changed files with 26 additions and 2 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

28
arch/cris/include/arch-v32/mach-a3/mach/startup.inc
View file

@ -1,9 +1,19 @@
#ifndef STARTUP_INC_INCLUDED
#define STARTUP_INC_INCLUDED
#include <hwregs/asm/reg_map_asm.h>
#include <hwregs/asm/gio_defs_asm.h>
#include <hwregs/asm/pio_defs_asm.h>
#include <hwregs/asm/clkgen_defs_asm.h>
#include <hwregs/asm/pinmux_defs_asm.h>
.macro GIO_SET_P BITS, OUTREG
bmi 1f ; btstq: bit -> N flag
nop
or.d \BITS, \OUTREG
1:
.endm
.macro GIO_INIT
move.d CONFIG_ETRAX_DEF_GIO_PA_OUT, $r0
move.d REG_ADDR(gio, regi_gio, rw_pa_dout), $r1
@ -32,10 +42,23 @@
move.d 0xFFFFFFFF, $r0
move.d REG_ADDR(pinmux, regi_pinmux, rw_gio_pa), $r1
move.d $r0, [$r1]
move.d REG_ADDR(pinmux, regi_pinmux, rw_gio_pb), $r1
move.d $r0, [$r1]
move.d REG_ADDR(pinmux, regi_pinmux, rw_gio_pc), $r1
move.d $r0, [$r1]
;; If eth_mdio, eth, geth bits are set in hwprot, don't
;; set them to gpio, as this means they have been configured
;; earlier and shouldn't be changed.
move.d 0xFC000000, $r2 ; pins 25..0 are eth_mdio, eth, geth
move.d REG_ADDR(pinmux, regi_pinmux, rw_hwprot), $r1
move.d [$r1], $r0
btstq REG_BIT(pinmux, rw_hwprot, eth), $r0
GIO_SET_P 0x00FFFF00, $r2 ;; pins 8..23 are eth
btstq REG_BIT(pinmux, rw_hwprot, eth_mdio), $r0
GIO_SET_P 0x03000000, $r2 ;; pins 24..25 are eth_mdio
btstq REG_BIT(pinmux, rw_hwprot, geth), $r0
GIO_SET_P 0x000000FF, $r2 ;; pins 0..7 are geth
move.d REG_ADDR(pinmux, regi_pinmux, rw_gio_pb), $r1
move.d $r2, [$r1]
.endm
.macro START_CLOCKS
@ -58,3 +81,4 @@
move.d CONFIG_ETRAX_PIO_CE2_CFG, $r1
move.d $r1, [$r0]
.endm
#endif