From 662c738d9946de521dcece2b146dced335242389 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Heiko=20St=C3=BCbner?= Date: Wed, 29 Feb 2012 23:03:11 +0100 Subject: [PATCH 001/365] usb: otg: gpio_vbus: Add otg transceiver events and notifiers Commit 9ad63986c606 (pda_power: Add support for using otg transceiver events) converted the pda-power driver to use otg events to determine the status of the power supply. As gpio-vbus didn't use otg events until now, this change breaks setups of pda-power with a gpio-vbus transceiver. This patch adds the necessary otg events and notifiers to gpio-vbus. Signed-off-by: Heiko Stuebner Reviewed-by: Dima Zavin Signed-off-by: Felipe Balbi --- drivers/usb/otg/gpio_vbus.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/drivers/usb/otg/gpio_vbus.c b/drivers/usb/otg/gpio_vbus.c index 3ece43a2e4c1..a0a2178974fe 100644 --- a/drivers/usb/otg/gpio_vbus.c +++ b/drivers/usb/otg/gpio_vbus.c @@ -96,7 +96,7 @@ static void gpio_vbus_work(struct work_struct *work) struct gpio_vbus_data *gpio_vbus = container_of(work, struct gpio_vbus_data, work); struct gpio_vbus_mach_info *pdata = gpio_vbus->dev->platform_data; - int gpio; + int gpio, status; if (!gpio_vbus->phy.otg->gadget) return; @@ -108,7 +108,9 @@ static void gpio_vbus_work(struct work_struct *work) */ gpio = pdata->gpio_pullup; if (is_vbus_powered(pdata)) { + status = USB_EVENT_VBUS; gpio_vbus->phy.state = OTG_STATE_B_PERIPHERAL; + gpio_vbus->phy.last_event = status; usb_gadget_vbus_connect(gpio_vbus->phy.otg->gadget); /* drawing a "unit load" is *always* OK, except for OTG */ @@ -117,6 +119,9 @@ static void gpio_vbus_work(struct work_struct *work) /* optionally enable D+ pullup */ if (gpio_is_valid(gpio)) gpio_set_value(gpio, !pdata->gpio_pullup_inverted); + + atomic_notifier_call_chain(&gpio_vbus->phy.notifier, + status, gpio_vbus->phy.otg->gadget); } else { /* optionally disable D+ pullup */ if (gpio_is_valid(gpio)) @@ -125,7 +130,12 @@ static void gpio_vbus_work(struct work_struct *work) set_vbus_draw(gpio_vbus, 0); usb_gadget_vbus_disconnect(gpio_vbus->phy.otg->gadget); + status = USB_EVENT_NONE; gpio_vbus->phy.state = OTG_STATE_B_IDLE; + gpio_vbus->phy.last_event = status; + + atomic_notifier_call_chain(&gpio_vbus->phy.notifier, + status, gpio_vbus->phy.otg->gadget); } } @@ -287,6 +297,9 @@ static int __init gpio_vbus_probe(struct platform_device *pdev) irq, err); goto err_irq; } + + ATOMIC_INIT_NOTIFIER_HEAD(&gpio_vbus->phy.notifier); + INIT_WORK(&gpio_vbus->work, gpio_vbus_work); gpio_vbus->vbus_draw = regulator_get(&pdev->dev, "vbus_draw"); From c85dcdac5852295cf6822f5c4331a6ddab72581f Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 11 Apr 2012 16:09:10 -0400 Subject: [PATCH 002/365] USB: gadget: storage gadgets send wrong error code for unknown commands This patch (as1539) fixes a minor bug in the mass-storage gadget drivers. When an unknown command is received, the error code sent back is "Invalid Field in CDB" rather than "Invalid Command". This is because the bitmask of CDB bytes allowed to be nonzero is incorrect. When handling an unknown command, we don't care which command bytes are nonzero. All the bits in the mask should be set, not just eight of them. Signed-off-by: Alan Stern CC: CC: Signed-off-by: Felipe Balbi --- drivers/usb/gadget/f_mass_storage.c | 2 +- drivers/usb/gadget/file_storage.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c index a371e966425f..cb8c162cae5a 100644 --- a/drivers/usb/gadget/f_mass_storage.c +++ b/drivers/usb/gadget/f_mass_storage.c @@ -2189,7 +2189,7 @@ unknown_cmnd: common->data_size_from_cmnd = 0; sprintf(unknown, "Unknown x%02x", common->cmnd[0]); reply = check_command(common, common->cmnd_size, - DATA_DIR_UNKNOWN, 0xff, 0, unknown); + DATA_DIR_UNKNOWN, ~0, 0, unknown); if (reply == 0) { common->curlun->sense_data = SS_INVALID_COMMAND; reply = -EINVAL; diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c index 4fac56927741..a896d73f7a93 100644 --- a/drivers/usb/gadget/file_storage.c +++ b/drivers/usb/gadget/file_storage.c @@ -2579,7 +2579,7 @@ static int do_scsi_command(struct fsg_dev *fsg) fsg->data_size_from_cmnd = 0; sprintf(unknown, "Unknown x%02x", fsg->cmnd[0]); if ((reply = check_command(fsg, fsg->cmnd_size, - DATA_DIR_UNKNOWN, 0xff, 0, unknown)) == 0) { + DATA_DIR_UNKNOWN, ~0, 0, unknown)) == 0) { fsg->curlun->sense_data = SS_INVALID_COMMAND; reply = -EINVAL; } From 7e1f7c8a6e517900cd84da1b8ae020f08f286c3b Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 12 Apr 2012 17:29:36 +0100 Subject: [PATCH 003/365] ASoC: dapm: Ensure power gets managed for line widgets Line widgets had not been included in either the power up or power down sequences so if a widget had an event associated with it that event would never be run. Fix this minimally by adding them to the sequences, we should probably be doing away with the specific widget types as they all have the same priority anyway. Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/soc-dapm.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index 6241490fff30..dc7dbfe61cd0 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -67,6 +67,7 @@ static int dapm_up_seq[] = { [snd_soc_dapm_out_drv] = 10, [snd_soc_dapm_hp] = 10, [snd_soc_dapm_spk] = 10, + [snd_soc_dapm_line] = 10, [snd_soc_dapm_post] = 11, }; @@ -75,6 +76,7 @@ static int dapm_down_seq[] = { [snd_soc_dapm_adc] = 1, [snd_soc_dapm_hp] = 2, [snd_soc_dapm_spk] = 2, + [snd_soc_dapm_line] = 2, [snd_soc_dapm_out_drv] = 2, [snd_soc_dapm_pga] = 4, [snd_soc_dapm_mixer_named_ctl] = 5, From 86fc49982369f6918dd9c6eeb70b38ab2303ed0a Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Thu, 12 Apr 2012 21:54:34 +0200 Subject: [PATCH 004/365] ASoC: cs42l73: don't use negative array index If cs42l73_get_mclkx_coeff() returns < 0 (which it can) in sound/soc/codecs/cs42l73.c::cs42l73_set_mclk(), then we'll be using the (negative) return value as array index on the very next line of code - that's bad. Catch the negative return value and propagate it to the caller (which checks for it) and things are a bit more sane :-) Signed-off-by: Jesper Juhl Signed-off-by: Mark Brown --- sound/soc/codecs/cs42l73.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/soc/codecs/cs42l73.c b/sound/soc/codecs/cs42l73.c index 78979b3e0e95..07c44b71f096 100644 --- a/sound/soc/codecs/cs42l73.c +++ b/sound/soc/codecs/cs42l73.c @@ -929,6 +929,8 @@ static int cs42l73_set_mclk(struct snd_soc_dai *dai, unsigned int freq) /* MCLKX -> MCLK */ mclkx_coeff = cs42l73_get_mclkx_coeff(freq); + if (mclkx_coeff < 0) + return mclkx_coeff; mclk = cs42l73_mclkx_coeffs[mclkx_coeff].mclkx / cs42l73_mclkx_coeffs[mclkx_coeff].ratio; From 79cd76022044f8177bb00e3fd590ec8d6b5f8c35 Mon Sep 17 00:00:00 2001 From: Manoj Iyer Date: Mon, 9 Apr 2012 09:22:28 -0500 Subject: [PATCH 005/365] Bluetooth: btusb: Add vendor specific ID (0489 e042) for BCM20702A0 T: Bus=02 Lev=02 Prnt=02 Port=04 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e042 Rev=01.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=E4D53DCA61B5 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=(none) I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Reported-by: Dennis Chua Signed-off-by: Manoj Iyer Signed-off-by: Johan Hedberg --- drivers/bluetooth/btusb.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 3311b812a0c6..9af450a0fc87 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -101,6 +101,7 @@ static struct usb_device_id btusb_table[] = { { USB_DEVICE(0x0c10, 0x0000) }, /* Broadcom BCM20702A0 */ + { USB_DEVICE(0x0489, 0xe042) }, { USB_DEVICE(0x0a5c, 0x21e3) }, { USB_DEVICE(0x0a5c, 0x21e6) }, { USB_DEVICE(0x0a5c, 0x21e8) }, From a956bd6f8583326b18348ab1452b4686778f785d Mon Sep 17 00:00:00 2001 From: Andreas Herrmann Date: Thu, 12 Apr 2012 16:48:01 +0200 Subject: [PATCH 006/365] x86, microcode: Fix sysfs warning during module unload on unsupported CPUs Loading the microcode driver on an unsupported CPU and subsequently unloading the driver causes WARNING: at fs/sysfs/group.c:138 mc_device_remove+0x5f/0x70 [microcode]() Hardware name: 01972NG sysfs group ffffffffa00013d0 not found for kobject 'cpu0' Modules linked in: snd_hda_codec_hdmi snd_hda_codec_conexant snd_hda_intel btusb snd_hda_codec bluetooth thinkpad_acpi rfkill microcode(-) [last unloaded: cfg80211] Pid: 4560, comm: modprobe Not tainted 3.4.0-rc2-00002-g258f742 #5 Call Trace: [] ? warn_slowpath_common+0x7b/0xc0 [] ? warn_slowpath_fmt+0x45/0x50 [] ? sysfs_remove_group+0x34/0x120 [] ? mc_device_remove+0x5f/0x70 [microcode] [] ? subsys_interface_unregister+0x69/0xa0 [] ? mutex_lock+0x16/0x40 [] ? microcode_exit+0x50/0x92 [microcode] [] ? sys_delete_module+0x16d/0x260 [] ? wait_iff_congested+0x45/0x110 [] ? page_fault+0x1f/0x30 [] ? system_call_fastpath+0x16/0x1b on recent kernels. This is due to commit 8a25a2fd126c ("cpu: convert 'cpu' and 'machinecheck' sysdev_class to a regular subsystem") which renders commit 6c53cbfced04 ("x86, microcode: Correct sysdev_add error path") useless. See http://marc.info/?l=linux-kernel&m=133416246406478 Avoid above warning by restoring the old driver behaviour before 6c53cbfced04 ("x86, microcode: Correct sysdev_add error path"). Cc: stable@vger.kernel.org Cc: Tigran Aivazian Signed-off-by: Andreas Herrmann Acked-by: Greg Kroah-Hartman Link: http://lkml.kernel.org/r/20120411163849.GE4794@alberich.amd.com Signed-off-by: Borislav Petkov --- arch/x86/kernel/microcode_core.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c index 87a0f8688301..d389e74342a3 100644 --- a/arch/x86/kernel/microcode_core.c +++ b/arch/x86/kernel/microcode_core.c @@ -419,10 +419,8 @@ static int mc_device_add(struct device *dev, struct subsys_interface *sif) if (err) return err; - if (microcode_init_cpu(cpu) == UCODE_ERROR) { - sysfs_remove_group(&dev->kobj, &mc_attr_group); + if (microcode_init_cpu(cpu) == UCODE_ERROR) return -EINVAL; - } return err; } From 283c1f2558ef4a4411fe908364b15b73b6ab44cf Mon Sep 17 00:00:00 2001 From: Andreas Herrmann Date: Thu, 12 Apr 2012 16:51:57 +0200 Subject: [PATCH 007/365] x86, microcode: Ensure that module is only loaded on supported AMD CPUs Exit early when there's no support for a particular CPU family. Also, fixup the "no support for this CPU vendor" to be issued only when the driver is attempted to be loaded on an unsupported vendor. Cc: stable@vger.kernel.org Cc: Tigran Aivazian Signed-off-by: Andreas Herrmann Acked-by: Greg Kroah-Hartman Link: http://lkml.kernel.org/r/20120411163849.GE4794@alberich.amd.com [Boris: add a commit msg because Andreas is lazy] Signed-off-by: Borislav Petkov --- arch/x86/kernel/microcode_amd.c | 12 +++++++----- arch/x86/kernel/microcode_core.c | 6 +++--- 2 files changed, 10 insertions(+), 8 deletions(-) diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c index 73465aab28f8..8a2ce8fd41c0 100644 --- a/arch/x86/kernel/microcode_amd.c +++ b/arch/x86/kernel/microcode_amd.c @@ -82,11 +82,6 @@ static int collect_cpu_info_amd(int cpu, struct cpu_signature *csig) { struct cpuinfo_x86 *c = &cpu_data(cpu); - if (c->x86_vendor != X86_VENDOR_AMD || c->x86 < 0x10) { - pr_warning("CPU%d: family %d not supported\n", cpu, c->x86); - return -1; - } - csig->rev = c->microcode; pr_info("CPU%d: patch_level=0x%08x\n", cpu, csig->rev); @@ -380,6 +375,13 @@ static struct microcode_ops microcode_amd_ops = { struct microcode_ops * __init init_amd_microcode(void) { + struct cpuinfo_x86 *c = &cpu_data(0); + + if (c->x86_vendor != X86_VENDOR_AMD || c->x86 < 0x10) { + pr_warning("AMD CPU family 0x%x not supported\n", c->x86); + return NULL; + } + patch = (void *)get_zeroed_page(GFP_KERNEL); if (!patch) return NULL; diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c index d389e74342a3..c9bda6d6035c 100644 --- a/arch/x86/kernel/microcode_core.c +++ b/arch/x86/kernel/microcode_core.c @@ -526,11 +526,11 @@ static int __init microcode_init(void) microcode_ops = init_intel_microcode(); else if (c->x86_vendor == X86_VENDOR_AMD) microcode_ops = init_amd_microcode(); - - if (!microcode_ops) { + else pr_err("no support for this CPU vendor\n"); + + if (!microcode_ops) return -ENODEV; - } microcode_pdev = platform_device_register_simple("microcode", -1, NULL, 0); From 87522a433ba6886b5ccbb497e0a7cb8097def64e Mon Sep 17 00:00:00 2001 From: AceLan Kao Date: Fri, 13 Apr 2012 17:39:57 +0800 Subject: [PATCH 008/365] Bluetooth: Add support for Atheros [13d3:3362] Add another vendor specific ID for Atheros AR3012 device. This chip is wrapped by IMC Networks. output of usb-devices: T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3362 Rev=00.02 S: Manufacturer=Atheros Communications S: Product=Bluetooth USB Host Controller S: SerialNumber=Alaska Day 2006 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb Signed-off-by: AceLan Kao Signed-off-by: Johan Hedberg --- drivers/bluetooth/ath3k.c | 2 ++ drivers/bluetooth/btusb.c | 1 + 2 files changed, 3 insertions(+) diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index ae9edca7b56d..639a1616402f 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -75,6 +75,7 @@ static struct usb_device_id ath3k_table[] = { { USB_DEVICE(0x0CF3, 0x311D) }, { USB_DEVICE(0x13d3, 0x3375) }, { USB_DEVICE(0x04CA, 0x3005) }, + { USB_DEVICE(0x13d3, 0x3362) }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xE02C) }, @@ -94,6 +95,7 @@ static struct usb_device_id ath3k_blist_tbl[] = { { USB_DEVICE(0x0cf3, 0x311D), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 }, { } /* Terminating entry */ }; diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 9af450a0fc87..a497544a87e8 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -134,6 +134,7 @@ static struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x0cf3, 0x311d), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE }, From 6e48b550d1f5f1919e6500547ae14a73fbf66c7b Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 13 Apr 2012 09:52:59 +0100 Subject: [PATCH 009/365] tracing: Fix build breakage without CONFIG_PERF_EVENTS (again) Today's -next fails to link for me: kernel/built-in.o:(.data+0x178e50): undefined reference to `perf_ftrace_event_register' It looks like multiple fixes have been merged for the issue fixed by commit fa73dc9 (tracing: Fix build breakage without CONFIG_PERF_EVENTS) though I can't identify the other changes that have gone in at the minute, it's possible that the changes which caused the breakage fixed by the previous commit got dropped but the fix made it in. Link: http://lkml.kernel.org/r/1334307179-21255-1-git-send-email-broonie@opensource.wolfsonmicro.com Cc: Frederic Weisbecker Cc: Ingo Molnar Signed-off-by: Mark Brown Signed-off-by: Steven Rostedt --- kernel/trace/trace.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h index 95059f091a24..f95d65da6db8 100644 --- a/kernel/trace/trace.h +++ b/kernel/trace/trace.h @@ -836,11 +836,11 @@ extern const char *__stop___trace_bprintk_fmt[]; filter) #include "trace_entries.h" -#ifdef CONFIG_FUNCTION_TRACER +#if defined(CONFIG_PERF_EVENTS) && defined(CONFIG_FUNCTION_TRACER) int perf_ftrace_event_register(struct ftrace_event_call *call, enum trace_reg type, void *data); #else #define perf_ftrace_event_register NULL -#endif /* CONFIG_FUNCTION_TRACER */ +#endif #endif /* _LINUX_KERNEL_TRACE_H */ From d7de8649f34d45041409d1af4ba4a521971a9075 Mon Sep 17 00:00:00 2001 From: Andreas Herrmann Date: Wed, 11 Apr 2012 17:12:38 +0200 Subject: [PATCH 010/365] x86/amd: Remove broken links from comment and kernel message Signed-off-by: Andreas Herrmann Link: http://lkml.kernel.org/r/20120411151238.GA4794@alberich.amd.com Signed-off-by: Ingo Molnar --- arch/x86/kernel/cpu/amd.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index 0a44b90602b0..1248f9ceabc1 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -26,7 +26,8 @@ * contact AMD for precise details and a CPU swap. * * See http://www.multimania.com/poulot/k6bug.html - * http://www.amd.com/K6/k6docs/revgd.html + * and section 2.6.2 of "AMD-K6 Processor Revision Guide - Model 6" + * (Publication # 21266 Issue Date: August 1998) * * The following test is erm.. interesting. AMD neglected to up * the chip setting when fixing the bug but they also tweaked some @@ -94,7 +95,6 @@ static void __cpuinit init_amd_k6(struct cpuinfo_x86 *c) "system stability may be impaired when more than 32 MB are used.\n"); else printk(KERN_CONT "probably OK (after B9730xxxx).\n"); - printk(KERN_INFO "Please see http://membres.lycos.fr/poulot/k6bug.html\n"); } /* K6 with old style WHCR */ From 745c0ce35f904aeff8e1ea325c259a14a00ff1b7 Mon Sep 17 00:00:00 2001 From: Vishal Agarwal Date: Fri, 13 Apr 2012 17:43:22 +0530 Subject: [PATCH 011/365] Bluetooth: hci_persistent_key should return bool This patch changes the return type of function hci_persistent_key from int to bool because it makes more sense to return information whether a key is persistent or not as a bool. Signed-off-by: Vishal Agarwal Acked-by: Marcel Holtmann Signed-off-by: Johan Hedberg --- include/net/bluetooth/hci_core.h | 2 +- net/bluetooth/hci_core.c | 21 +++++++++++---------- net/bluetooth/mgmt.c | 2 +- 3 files changed, 13 insertions(+), 12 deletions(-) diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h index 6822d2595aff..f8577c16fcf5 100644 --- a/include/net/bluetooth/hci_core.h +++ b/include/net/bluetooth/hci_core.h @@ -980,7 +980,7 @@ int mgmt_discoverable(struct hci_dev *hdev, u8 discoverable); int mgmt_connectable(struct hci_dev *hdev, u8 connectable); int mgmt_write_scan_failed(struct hci_dev *hdev, u8 scan, u8 status); int mgmt_new_link_key(struct hci_dev *hdev, struct link_key *key, - u8 persistent); + bool persistent); int mgmt_device_connected(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 link_type, u8 addr_type, u32 flags, u8 *name, u8 name_len, u8 *dev_class); diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index 2054c1321c87..c2251e4c3b72 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -1216,40 +1216,40 @@ struct link_key *hci_find_link_key(struct hci_dev *hdev, bdaddr_t *bdaddr) return NULL; } -static int hci_persistent_key(struct hci_dev *hdev, struct hci_conn *conn, +static bool hci_persistent_key(struct hci_dev *hdev, struct hci_conn *conn, u8 key_type, u8 old_key_type) { /* Legacy key */ if (key_type < 0x03) - return 1; + return true; /* Debug keys are insecure so don't store them persistently */ if (key_type == HCI_LK_DEBUG_COMBINATION) - return 0; + return false; /* Changed combination key and there's no previous one */ if (key_type == HCI_LK_CHANGED_COMBINATION && old_key_type == 0xff) - return 0; + return false; /* Security mode 3 case */ if (!conn) - return 1; + return true; /* Neither local nor remote side had no-bonding as requirement */ if (conn->auth_type > 0x01 && conn->remote_auth > 0x01) - return 1; + return true; /* Local side had dedicated bonding as requirement */ if (conn->auth_type == 0x02 || conn->auth_type == 0x03) - return 1; + return true; /* Remote side had dedicated bonding as requirement */ if (conn->remote_auth == 0x02 || conn->remote_auth == 0x03) - return 1; + return true; /* If none of the above criteria match, then don't store the key * persistently */ - return 0; + return false; } struct smp_ltk *hci_find_ltk(struct hci_dev *hdev, __le16 ediv, u8 rand[8]) @@ -1286,7 +1286,8 @@ int hci_add_link_key(struct hci_dev *hdev, struct hci_conn *conn, int new_key, bdaddr_t *bdaddr, u8 *val, u8 type, u8 pin_len) { struct link_key *key, *old_key; - u8 old_key_type, persistent; + u8 old_key_type; + bool persistent; old_key = hci_find_link_key(hdev, bdaddr); if (old_key) { diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index 4ef275c69675..4bb03b111122 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -2884,7 +2884,7 @@ int mgmt_write_scan_failed(struct hci_dev *hdev, u8 scan, u8 status) return 0; } -int mgmt_new_link_key(struct hci_dev *hdev, struct link_key *key, u8 persistent) +int mgmt_new_link_key(struct hci_dev *hdev, struct link_key *key, bool persistent) { struct mgmt_ev_new_link_key ev; From 6ec5bcadc21e13ceba8c144e4731eccac01d04f7 Mon Sep 17 00:00:00 2001 From: Vishal Agarwal Date: Mon, 16 Apr 2012 14:44:44 +0530 Subject: [PATCH 012/365] Bluetooth: Temporary keys should be retained during connection If a key is non persistent then it should not be used in future connections but it should be kept for current connection. And it should be removed when connecion is removed. Signed-off-by: Vishal Agarwal Acked-by: Marcel Holtmann Signed-off-by: Johan Hedberg --- include/net/bluetooth/hci_core.h | 1 + net/bluetooth/hci_core.c | 6 ++---- net/bluetooth/hci_event.c | 2 ++ 3 files changed, 5 insertions(+), 4 deletions(-) diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h index f8577c16fcf5..db1c5df45224 100644 --- a/include/net/bluetooth/hci_core.h +++ b/include/net/bluetooth/hci_core.h @@ -314,6 +314,7 @@ struct hci_conn { __u8 remote_cap; __u8 remote_auth; + bool flush_key; unsigned int sent; diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index c2251e4c3b72..a7607e4be347 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -1330,10 +1330,8 @@ int hci_add_link_key(struct hci_dev *hdev, struct hci_conn *conn, int new_key, mgmt_new_link_key(hdev, key, persistent); - if (!persistent) { - list_del(&key->list); - kfree(key); - } + if (conn) + conn->flush_key = !persistent; return 0; } diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c index badb7851d116..6a72eaea70ee 100644 --- a/net/bluetooth/hci_event.c +++ b/net/bluetooth/hci_event.c @@ -1902,6 +1902,8 @@ static inline void hci_disconn_complete_evt(struct hci_dev *hdev, struct sk_buff } if (ev->status == 0) { + if (conn->type == ACL_LINK && conn->flush_key) + hci_remove_link_key(hdev, &conn->dst); hci_proto_disconn_cfm(conn, ev->reason); hci_conn_del(conn); } From 9e755756e4a22784abfb001688357745ea8ca97c Mon Sep 17 00:00:00 2001 From: David Ahern Date: Sun, 15 Apr 2012 20:54:15 -0600 Subject: [PATCH 013/365] perf report: Fix crash showing warning related to kernel maps While testing https://lkml.org/lkml/2012/4/10/123 I hit this crash: (gdb) bt 0 0x000000000042000f in __cmd_report (rep=0x7fff80cec580) at builtin-report.c:380 1 cmd_report (argc=0, argv=, prefix=) at builtin-report.c:759 2 0x0000000000414513 in run_builtin (p=0x7724a8, argc=3, argv=0x7fff80ceca70) at perf.c:273 3 0x0000000000413d41 in handle_internal_command (argv=0x7fff80ceca70, argc=3) at perf.c:345 4 run_argv (argv=0x7fff80cec880, argcp=0x7fff80cec88c) at perf.c:389 5 main (argc=3, argv=0x7fff80ceca70) at perf.c:487 kernel_map can be NULL, so need to handle it while dumping a warning to user. v2: - fixed RB_EMPTY_ROOT check -- desc takes the altnerative output when RB_EMPTY_ROOT is false. Signed-off-by: David Ahern Cc: Ingo Molnar Cc: Peter Zijlstra Cc: Stephane Eranian Cc: Namhyung Kim Link: http://lkml.kernel.org/r/1334544855-55021-1-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/builtin-report.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) diff --git a/tools/perf/builtin-report.c b/tools/perf/builtin-report.c index 2e317438980b..cdae9b2db1cc 100644 --- a/tools/perf/builtin-report.c +++ b/tools/perf/builtin-report.c @@ -374,16 +374,23 @@ static int __cmd_report(struct perf_report *rep) (kernel_map->dso->hit && (kernel_kmap->ref_reloc_sym == NULL || kernel_kmap->ref_reloc_sym->addr == 0))) { - const struct dso *kdso = kernel_map->dso; + const char *desc = + "As no suitable kallsyms nor vmlinux was found, kernel samples\n" + "can't be resolved."; + + if (kernel_map) { + const struct dso *kdso = kernel_map->dso; + if (!RB_EMPTY_ROOT(&kdso->symbols[MAP__FUNCTION])) { + desc = "If some relocation was applied (e.g. " + "kexec) symbols may be misresolved."; + } + } ui__warning( "Kernel address maps (/proc/{kallsyms,modules}) were restricted.\n\n" "Check /proc/sys/kernel/kptr_restrict before running 'perf record'.\n\n%s\n\n" "Samples in kernel modules can't be resolved as well.\n\n", - RB_EMPTY_ROOT(&kdso->symbols[MAP__FUNCTION]) ? -"As no suitable kallsyms nor vmlinux was found, kernel samples\n" -"can't be resolved." : -"If some relocation was applied (e.g. kexec) symbols may be misresolved."); + desc); } if (dump_trace) { From b1994304fc399f5d3a5368c81111d713490c4799 Mon Sep 17 00:00:00 2001 From: Matt Fleming Date: Sun, 15 Apr 2012 16:06:04 +0100 Subject: [PATCH 014/365] x86, efi: Add dedicated EFI stub entry point The method used to work out whether we were booted by EFI firmware or via a boot loader is broken. Because efi_main() is always executed when booting from a boot loader we will dereference invalid pointers either on the stack (CONFIG_X86_32) or contained in %rdx (CONFIG_X86_64) when searching for an EFI System Table signature. Instead of dereferencing these invalid system table pointers, add a new entry point that is only used when booting from EFI firmware, when we know the pointer arguments will be valid. With this change legacy boot loaders will no longer execute efi_main(), but will instead skip EFI stub initialisation completely. [ hpa: Marking this for urgent/stable since it is a regression when the option is enabled; without the option the patch has no effect ] Signed-off-by: Matt Fleming Link: http://lkml.kernel.org/r/1334584744.26997.14.camel@mfleming-mobl1.ger.corp.intel.com Reported-by: Jordan Justen Signed-off-by: H. Peter Anvin Cc: v3.3 --- arch/x86/boot/compressed/head_32.S | 14 +++++++++++--- arch/x86/boot/compressed/head_64.S | 22 ++++++++++++++++------ arch/x86/boot/tools/build.c | 15 +++++++++++---- 3 files changed, 38 insertions(+), 13 deletions(-) diff --git a/arch/x86/boot/compressed/head_32.S b/arch/x86/boot/compressed/head_32.S index a0559930a180..c85e3ac99bba 100644 --- a/arch/x86/boot/compressed/head_32.S +++ b/arch/x86/boot/compressed/head_32.S @@ -33,6 +33,9 @@ __HEAD ENTRY(startup_32) #ifdef CONFIG_EFI_STUB + jmp preferred_addr + + .balign 0x10 /* * We don't need the return address, so set up the stack so * efi_main() can find its arugments. @@ -41,12 +44,17 @@ ENTRY(startup_32) call efi_main cmpl $0, %eax - je preferred_addr movl %eax, %esi - call 1f + jne 2f 1: + /* EFI init failed, so hang. */ + hlt + jmp 1b +2: + call 3f +3: popl %eax - subl $1b, %eax + subl $3b, %eax subl BP_pref_address(%esi), %eax add BP_code32_start(%esi), %eax leal preferred_addr(%eax), %eax diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S index 558d76ce23bc..87e03a13d8e3 100644 --- a/arch/x86/boot/compressed/head_64.S +++ b/arch/x86/boot/compressed/head_64.S @@ -200,18 +200,28 @@ ENTRY(startup_64) * entire text+data+bss and hopefully all of memory. */ #ifdef CONFIG_EFI_STUB - pushq %rsi + /* + * The entry point for the PE/COFF executable is 0x210, so only + * legacy boot loaders will execute this jmp. + */ + jmp preferred_addr + + .org 0x210 mov %rcx, %rdi mov %rdx, %rsi call efi_main - popq %rsi - cmpq $0,%rax - je preferred_addr movq %rax,%rsi - call 1f + cmpq $0,%rax + jne 2f 1: + /* EFI init failed, so hang. */ + hlt + jmp 1b +2: + call 3f +3: popq %rax - subq $1b, %rax + subq $3b, %rax subq BP_pref_address(%rsi), %rax add BP_code32_start(%esi), %eax leaq preferred_addr(%rax), %rax diff --git a/arch/x86/boot/tools/build.c b/arch/x86/boot/tools/build.c index ed549767a231..24443a332083 100644 --- a/arch/x86/boot/tools/build.c +++ b/arch/x86/boot/tools/build.c @@ -205,8 +205,13 @@ int main(int argc, char ** argv) put_unaligned_le32(file_sz, &buf[pe_header + 0x50]); #ifdef CONFIG_X86_32 - /* Address of entry point */ - put_unaligned_le32(i, &buf[pe_header + 0x28]); + /* + * Address of entry point. + * + * The EFI stub entry point is +16 bytes from the start of + * the .text section. + */ + put_unaligned_le32(i + 16, &buf[pe_header + 0x28]); /* .text size */ put_unaligned_le32(file_sz, &buf[pe_header + 0xb0]); @@ -217,9 +222,11 @@ int main(int argc, char ** argv) /* * Address of entry point. startup_32 is at the beginning and * the 64-bit entry point (startup_64) is always 512 bytes - * after. + * after. The EFI stub entry point is 16 bytes after that, as + * the first instruction allows legacy loaders to jump over + * the EFI stub initialisation */ - put_unaligned_le32(i + 512, &buf[pe_header + 0x28]); + put_unaligned_le32(i + 528, &buf[pe_header + 0x28]); /* .text size */ put_unaligned_le32(file_sz, &buf[pe_header + 0xc0]); From 68894632afb2729a1d8785c877840953894c7283 Mon Sep 17 00:00:00 2001 From: Andreas Herrmann Date: Mon, 2 Apr 2012 18:06:48 +0200 Subject: [PATCH 015/365] x86/platform: Remove incorrect error message in x86_default_fixup_cpu_id() It's only called from amd.c:srat_detect_node(). The introduced condition for calling the fixup code is true for all AMD multi-node processors, e.g. Magny-Cours and Interlagos. There we have 2 NUMA nodes on one socket. Thus there are cores having different numa-node-id but with equal phys_proc_id. There is no point to print error messages in such a situation. The confusing/misleading error message was introduced with commit 64be4c1c2428e148de6081af235e2418e6a66dda ("x86: Add x86_init platform override to fix up NUMA core numbering"). Remove the default fixup function (especially the error message) and replace it by a NULL pointer check, move the Numascale-specific condition for calling the fixup into the fixup-function itself and slightly adapt the comment. Signed-off-by: Andreas Herrmann Acked-by: Borislav Petkov Cc: Cc: Cc: Cc: Link: http://lkml.kernel.org/r/20120402160648.GR27684@alberich.amd.com Signed-off-by: Ingo Molnar --- arch/x86/include/asm/x86_init.h | 1 - arch/x86/kernel/apic/apic_numachip.c | 7 +++++-- arch/x86/kernel/cpu/amd.c | 7 ++++--- arch/x86/kernel/cpu/common.c | 9 --------- arch/x86/kernel/x86_init.c | 1 - 5 files changed, 9 insertions(+), 16 deletions(-) diff --git a/arch/x86/include/asm/x86_init.h b/arch/x86/include/asm/x86_init.h index baaca8defec8..764b66a4cf89 100644 --- a/arch/x86/include/asm/x86_init.h +++ b/arch/x86/include/asm/x86_init.h @@ -195,6 +195,5 @@ extern struct x86_msi_ops x86_msi; extern void x86_init_noop(void); extern void x86_init_uint_noop(unsigned int unused); -extern void x86_default_fixup_cpu_id(struct cpuinfo_x86 *c, int node); #endif diff --git a/arch/x86/kernel/apic/apic_numachip.c b/arch/x86/kernel/apic/apic_numachip.c index 899803e03214..23e75422e013 100644 --- a/arch/x86/kernel/apic/apic_numachip.c +++ b/arch/x86/kernel/apic/apic_numachip.c @@ -207,8 +207,11 @@ static void __init map_csrs(void) static void fixup_cpu_id(struct cpuinfo_x86 *c, int node) { - c->phys_proc_id = node; - per_cpu(cpu_llc_id, smp_processor_id()) = node; + + if (c->phys_proc_id != node) { + c->phys_proc_id = node; + per_cpu(cpu_llc_id, smp_processor_id()) = node; + } } static int __init numachip_system_init(void) diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index 1248f9ceabc1..1c67ca100e4c 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -353,10 +353,11 @@ static void __cpuinit srat_detect_node(struct cpuinfo_x86 *c) node = per_cpu(cpu_llc_id, cpu); /* - * If core numbers are inconsistent, it's likely a multi-fabric platform, - * so invoke platform-specific handler + * On multi-fabric platform (e.g. Numascale NumaChip) a + * platform-specific handler needs to be called to fixup some + * IDs of the CPU. */ - if (c->phys_proc_id != node) + if (x86_cpuinit.fixup_cpu_id) x86_cpuinit.fixup_cpu_id(c, node); if (!node_online(node)) { diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index 67e258362a3d..cf79302198a6 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -1162,15 +1162,6 @@ static void dbg_restore_debug_regs(void) #define dbg_restore_debug_regs() #endif /* ! CONFIG_KGDB */ -/* - * Prints an error where the NUMA and configured core-number mismatch and the - * platform didn't override this to fix it up - */ -void __cpuinit x86_default_fixup_cpu_id(struct cpuinfo_x86 *c, int node) -{ - pr_err("NUMA core number %d differs from configured core number %d\n", node, c->phys_proc_id); -} - /* * cpu_init() initializes state that is per-CPU. Some data is already * initialized (naturally) in the bootstrap process, such as the GDT diff --git a/arch/x86/kernel/x86_init.c b/arch/x86/kernel/x86_init.c index e9f265fd79ae..9cf71d0b2d37 100644 --- a/arch/x86/kernel/x86_init.c +++ b/arch/x86/kernel/x86_init.c @@ -93,7 +93,6 @@ struct x86_init_ops x86_init __initdata = { struct x86_cpuinit_ops x86_cpuinit __cpuinitdata = { .early_percpu_clock_init = x86_init_noop, .setup_percpu_clockev = setup_secondary_APIC_clock, - .fixup_cpu_id = x86_default_fixup_cpu_id, }; static void default_nmi_init(void) { }; From 6ffd7bdbf8516d691974d21098278af65d4817a5 Mon Sep 17 00:00:00 2001 From: Otavio Salvador Date: Wed, 11 Apr 2012 09:44:30 -0300 Subject: [PATCH 016/365] perf tools: Drop CROSS_COMPILE from flex and bison calls The flex and bison tools generate arch-independent C code so its binaries are not prefixed with the target-arch prefix. With this patch the Linux 3.4-rc2 can be successfuly build on OE-Core. Signed-off-by: Otavio Salvador Link: http://lkml.kernel.org/r/1334148270-13139-1-git-send-email-otavio@ossystems.com.br Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/perf/Makefile b/tools/perf/Makefile index 03059e75665a..9bf3fc759344 100644 --- a/tools/perf/Makefile +++ b/tools/perf/Makefile @@ -234,8 +234,8 @@ endif export PERL_PATH -FLEX = $(CROSS_COMPILE)flex -BISON= $(CROSS_COMPILE)bison +FLEX = flex +BISON= bison $(OUTPUT)util/parse-events-flex.c: util/parse-events.l $(QUIET_FLEX)$(FLEX) --header-file=$(OUTPUT)util/parse-events-flex.h -t util/parse-events.l > $(OUTPUT)util/parse-events-flex.c From 348f0fc238efb441a28e7644c51f9fd3001b228a Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Mon, 16 Apr 2012 15:41:28 -0400 Subject: [PATCH 017/365] tracing: Fix regression with tracing_on The change to make tracing_on affect only the ftrace ring buffer, caused a bug where it wont affect any ring buffer. The problem was that the buffer of the trace_array was passed to the write function and not the trace array itself. The trace_array can change the buffer when running a latency tracer. If this happens, then the buffer being disabled may not be the buffer currently used by ftrace. This will cause the tracing_on file to become useless. The simple fix is to pass the trace_array to the write function instead of the buffer. Then the actual buffer may be changed. Signed-off-by: Steven Rostedt --- kernel/trace/trace.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index ed7b5d1e12f4..2a22255c1010 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -4629,7 +4629,8 @@ static ssize_t rb_simple_read(struct file *filp, char __user *ubuf, size_t cnt, loff_t *ppos) { - struct ring_buffer *buffer = filp->private_data; + struct trace_array *tr = filp->private_data; + struct ring_buffer *buffer = tr->buffer; char buf[64]; int r; @@ -4647,7 +4648,8 @@ static ssize_t rb_simple_write(struct file *filp, const char __user *ubuf, size_t cnt, loff_t *ppos) { - struct ring_buffer *buffer = filp->private_data; + struct trace_array *tr = filp->private_data; + struct ring_buffer *buffer = tr->buffer; unsigned long val; int ret; @@ -4734,7 +4736,7 @@ static __init int tracer_init_debugfs(void) &trace_clock_fops); trace_create_file("tracing_on", 0644, d_tracer, - global_trace.buffer, &rb_simple_fops); + &global_trace, &rb_simple_fops); #ifdef CONFIG_DYNAMIC_FTRACE trace_create_file("dyn_ftrace_total_info", 0444, d_tracer, From 089f9fba56faf33cc6dd2a6442b7ac92c58b8209 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Mon, 16 Apr 2012 22:48:15 +0200 Subject: [PATCH 018/365] i387: ptrace breaks the lazy-fpu-restore logic Starting from 7e16838d "i387: support lazy restore of FPU state" we assume that fpu_owner_task doesn't need restore_fpu_checking() on the context switch, its FPU state should match what we already have in the FPU on this CPU. However, debugger can change the tracee's FPU state, in this case we should reset fpu.last_cpu to ensure fpu_lazy_restore() can't return true. Change init_fpu() to do this, it is called by user_regset->set() methods. Reported-by: Jan Kratochvil Suggested-by: Linus Torvalds Signed-off-by: Oleg Nesterov Link: http://lkml.kernel.org/r/20120416204815.GB24884@redhat.com Cc: v3.3 Signed-off-by: H. Peter Anvin --- arch/x86/kernel/i387.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/kernel/i387.c b/arch/x86/kernel/i387.c index 7734bcbb5a3a..2d6e6498c176 100644 --- a/arch/x86/kernel/i387.c +++ b/arch/x86/kernel/i387.c @@ -235,6 +235,7 @@ int init_fpu(struct task_struct *tsk) if (tsk_used_math(tsk)) { if (HAVE_HWFP && tsk == current) unlazy_fpu(tsk); + tsk->thread.fpu.last_cpu = ~0; return 0; } From fc1a93bd9bad32581bca1e66fb7b3cabad9b3361 Mon Sep 17 00:00:00 2001 From: Adam Jackson Date: Mon, 9 Apr 2012 17:49:36 -0400 Subject: [PATCH 019/365] intel_ips: Hush the i915 symbols message We can't control order here, and getting it inverted is harmless. So turn this down to dev_info() and leave a note about how to fix it in case userspace is insufficiently automagic. Bugzilla: https://bugzilla.redhat.com/794953 Signed-off-by: Adam Jackson Signed-off-by: Matthew Garrett --- drivers/platform/x86/intel_ips.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/platform/x86/intel_ips.c b/drivers/platform/x86/intel_ips.c index f7ba316e0ed6..0ffdb3cde2bb 100644 --- a/drivers/platform/x86/intel_ips.c +++ b/drivers/platform/x86/intel_ips.c @@ -1565,7 +1565,7 @@ static int ips_probe(struct pci_dev *dev, const struct pci_device_id *id) ips->poll_turbo_status = true; if (!ips_get_i915_syms(ips)) { - dev_err(&dev->dev, "failed to get i915 symbols, graphics turbo disabled\n"); + dev_info(&dev->dev, "failed to get i915 symbols, graphics turbo disabled until i915 loads\n"); ips->gpu_turbo_enabled = false; } else { dev_dbg(&dev->dev, "graphics turbo enabled\n"); From d62d421b071b08249361044d8e56c8b5c3ed6aa7 Mon Sep 17 00:00:00 2001 From: Martin Nyhus Date: Thu, 15 Mar 2012 18:25:48 +0100 Subject: [PATCH 020/365] dell-laptop: Terminate quirks list properly Add missing DMI_NONE entry to end of the quirks list so dmi_check_system() won't read past the end of the list. Signed-off-by: Martin Nyhus Signed-off-by: Matthew Garrett --- drivers/platform/x86/dell-laptop.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/platform/x86/dell-laptop.c b/drivers/platform/x86/dell-laptop.c index a05fc9c955d8..e6c08ee8d46c 100644 --- a/drivers/platform/x86/dell-laptop.c +++ b/drivers/platform/x86/dell-laptop.c @@ -212,6 +212,7 @@ static struct dmi_system_id __devinitdata dell_quirks[] = { }, .driver_data = &quirk_dell_vostro_v130, }, + { } }; static struct calling_interface_buffer *buffer; From e7c72d888dac2c81003401d663bd8abd68e7c5cd Mon Sep 17 00:00:00 2001 From: Gleb Natapov Date: Tue, 17 Apr 2012 14:13:45 +0300 Subject: [PATCH 021/365] perf tools: Add 'G' and 'H' modifiers to event parsing They were dropped during conversion of event parser. Add test case to make sure this will not happen again. Signed-off-by: Gleb Natapov Acked-by: Jiri Olsa Cc: Avi Kivity Cc: Ingo Molnar Cc: Peter Zijlstra Cc: Jiri Olsa Link: http://lkml.kernel.org/r/20120417111345.GK11918@redhat.com Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/builtin-test.c | 30 ++++++++++++++++++++++++++++++ tools/perf/util/parse-events.l | 2 +- 2 files changed, 31 insertions(+), 1 deletion(-) diff --git a/tools/perf/builtin-test.c b/tools/perf/builtin-test.c index 1c5b9801ac61..223ffdcc0fd8 100644 --- a/tools/perf/builtin-test.c +++ b/tools/perf/builtin-test.c @@ -851,6 +851,28 @@ static int test__checkevent_symbolic_name_modifier(struct perf_evlist *evlist) return test__checkevent_symbolic_name(evlist); } +static int test__checkevent_exclude_host_modifier(struct perf_evlist *evlist) +{ + struct perf_evsel *evsel = list_entry(evlist->entries.next, + struct perf_evsel, node); + + TEST_ASSERT_VAL("wrong exclude guest", !evsel->attr.exclude_guest); + TEST_ASSERT_VAL("wrong exclude host", evsel->attr.exclude_host); + + return test__checkevent_symbolic_name(evlist); +} + +static int test__checkevent_exclude_guest_modifier(struct perf_evlist *evlist) +{ + struct perf_evsel *evsel = list_entry(evlist->entries.next, + struct perf_evsel, node); + + TEST_ASSERT_VAL("wrong exclude guest", evsel->attr.exclude_guest); + TEST_ASSERT_VAL("wrong exclude host", !evsel->attr.exclude_host); + + return test__checkevent_symbolic_name(evlist); +} + static int test__checkevent_symbolic_alias_modifier(struct perf_evlist *evlist) { struct perf_evsel *evsel = list_entry(evlist->entries.next, @@ -1091,6 +1113,14 @@ static struct test__event_st { .name = "r1,syscalls:sys_enter_open:k,1:1:hp", .check = test__checkevent_list, }, + { + .name = "instructions:G", + .check = test__checkevent_exclude_host_modifier, + }, + { + .name = "instructions:H", + .check = test__checkevent_exclude_guest_modifier, + }, }; #define TEST__EVENTS_CNT (sizeof(test__events) / sizeof(struct test__event_st)) diff --git a/tools/perf/util/parse-events.l b/tools/perf/util/parse-events.l index 05d766e3ecb5..1fcf1bbc5458 100644 --- a/tools/perf/util/parse-events.l +++ b/tools/perf/util/parse-events.l @@ -54,7 +54,7 @@ num_dec [0-9]+ num_hex 0x[a-fA-F0-9]+ num_raw_hex [a-fA-F0-9]+ name [a-zA-Z_*?][a-zA-Z0-9_*?]* -modifier_event [ukhp]{1,5} +modifier_event [ukhpGH]{1,8} modifier_bp [rwx] %% From 92c38702e98e58438c3760ebb279c40bbca8bd5f Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Mon, 16 Apr 2012 12:12:09 -0700 Subject: [PATCH 022/365] rcu: Permit call_rcu() from CPU_DYING notifiers As of: 29494be71afe ("rcu,cleanup: simplify the code when cpu is dying") RCU adopts callbacks from the dying CPU in its CPU_DYING notifier, which means that any callbacks posted by later CPU_DYING notifiers are ignored until the CPU comes back online. A WARN_ON_ONCE() was added to __call_rcu() by: e56014000816 ("rcu: Simplify offline processing") to check for this condition. Although this condition did not trigger (at least as far as I know) during -next testing, it did recently trigger in mainline: https://lkml.org/lkml/2012/4/2/34 What is needed longer term is for RCU's CPU_DEAD notifier to adopt any callbacks that were posted by CPU_DYING notifiers, however, the Linux kernel has been running with this sort of thing happening for quite some time. So the only thing that qualifies as a regression is the WARN_ON_ONCE(), which this commit removes. Making RCU's CPU_DEAD notifier adopt callbacks posted by CPU_DYING notifiers is a topic for the 3.5 release of the Linux kernel. Reported-by: Sergey Senozhatsky Signed-off-by: Paul E. McKenney Signed-off-by: Paul E. McKenney --- kernel/rcutree.c | 1 - 1 file changed, 1 deletion(-) diff --git a/kernel/rcutree.c b/kernel/rcutree.c index 1050d6d3922c..d0c5baf1ab18 100644 --- a/kernel/rcutree.c +++ b/kernel/rcutree.c @@ -1820,7 +1820,6 @@ __call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu), * a quiescent state betweentimes. */ local_irq_save(flags); - WARN_ON_ONCE(cpu_is_offline(smp_processor_id())); rdp = this_cpu_ptr(rsp->rda); /* Add the callback to our list. */ From a7dbb603423d499acacefb5fad65d2b406f16370 Mon Sep 17 00:00:00 2001 From: Liam Girdwood Date: Tue, 17 Apr 2012 18:00:11 +0100 Subject: [PATCH 023/365] ASoC: core: Fix card RTD count for deferred probe. Currently we increment the number of RTD's per card during the DAI link bind. This can cause an incorrect RTD count when we cannot find a component and defer the probe (and hence perform the DAI link bind for the card again). Fix the count so that it is cleared before every card registration and bind attempt. Signed-off-by: Liam Girdwood Signed-off-by: Mark Brown --- sound/soc/soc-core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 8d2ebf502df4..3a4e93e52b6d 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -3119,6 +3119,7 @@ int snd_soc_register_card(struct snd_soc_card *card) GFP_KERNEL); if (card->rtd == NULL) return -ENOMEM; + card->num_rtd = 0; card->rtd_aux = &card->rtd[card->num_links]; for (i = 0; i < card->num_links; i++) From eb798c641a34ae9cee9fcacfbe5dd40bd7777607 Mon Sep 17 00:00:00 2001 From: Vinit Shenoy Date: Tue, 17 Apr 2012 12:40:13 +0530 Subject: [PATCH 024/365] spi/pl022: Fix range checking for bits per word pl022 ssp controller supports word lengths from 4 to 16 (or 32) bits. Currently implemented checks were incorrect. It has following check if (pl022->vendor->max_bpw >= 32) which must be checking for <=. Also error print message is incorrect, that prints "range is from 1 to 16". Fix both these issues. Signed-off-by: Vinit Shenoy Acked-by: Linus Walleij Signed-off-by: Grant Likely --- drivers/spi/spi-pl022.c | 25 +++++++++---------------- 1 file changed, 9 insertions(+), 16 deletions(-) diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c index 09c925aaf320..1ead49dbebce 100644 --- a/drivers/spi/spi-pl022.c +++ b/drivers/spi/spi-pl022.c @@ -1823,9 +1823,12 @@ static int pl022_setup(struct spi_device *spi) } else chip->cs_control = chip_info->cs_control; - if (bits <= 3) { - /* PL022 doesn't support less than 4-bits */ + /* Check bits per word with vendor specific range */ + if ((bits <= 3) || (bits > pl022->vendor->max_bpw)) { status = -ENOTSUPP; + dev_err(&spi->dev, "illegal data size for this controller!\n"); + dev_err(&spi->dev, "This controller can only handle 4 <= n <= %d bit words\n", + pl022->vendor->max_bpw); goto err_config_params; } else if (bits <= 8) { dev_dbg(&spi->dev, "4 <= n <=8 bits per word\n"); @@ -1838,20 +1841,10 @@ static int pl022_setup(struct spi_device *spi) chip->read = READING_U16; chip->write = WRITING_U16; } else { - if (pl022->vendor->max_bpw >= 32) { - dev_dbg(&spi->dev, "17 <= n <= 32 bits per word\n"); - chip->n_bytes = 4; - chip->read = READING_U32; - chip->write = WRITING_U32; - } else { - dev_err(&spi->dev, - "illegal data size for this controller!\n"); - dev_err(&spi->dev, - "a standard pl022 can only handle " - "1 <= n <= 16 bit words\n"); - status = -ENOTSUPP; - goto err_config_params; - } + dev_dbg(&spi->dev, "17 <= n <= 32 bits per word\n"); + chip->n_bytes = 4; + chip->read = READING_U32; + chip->write = WRITING_U32; } /* Now Initialize all register settings required for this chip */ From cdf27f373781d8740b874b0b5c18142df32ebb52 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 17 Apr 2012 19:13:04 -0700 Subject: [PATCH 025/365] ASoC: fsi: update for dmaengine prep_slave_sg fallout. Leading up to the ->device_prep_slave_sg change in 185ecb5f4fd43911c35956d4cc7d94a1da30417f 'dmaengine: add context parameter to prep_slave_sg and prep_dma_cyclic' a generic wrapper was added in place to guard against the API change, though the fsi driver wasn't updated in the process (presumably its dmaengine support hadn't been merged yet at the time). This trivially switches over to the new wrapper and gets it building again. Signed-off-by: Paul Mundt Acked-by: Kuninori Morimoto Signed-off-by: Mark Brown --- sound/soc/sh/fsi.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/sound/soc/sh/fsi.c b/sound/soc/sh/fsi.c index 378cc5b056d7..74ed2dffbffd 100644 --- a/sound/soc/sh/fsi.c +++ b/sound/soc/sh/fsi.c @@ -1001,11 +1001,10 @@ static void fsi_dma_do_tasklet(unsigned long data) sg_dma_address(&sg) = buf; sg_dma_len(&sg) = len; - desc = chan->device->device_prep_slave_sg(chan, &sg, 1, dir, - DMA_PREP_INTERRUPT | - DMA_CTRL_ACK); + desc = dmaengine_prep_slave_sg(chan, &sg, 1, dir, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!desc) { - dev_err(dai->dev, "device_prep_slave_sg() fail\n"); + dev_err(dai->dev, "dmaengine_prep_slave_sg() fail\n"); return; } From fc87e080e19fdeb1120ce274423fea7b2ec2f63e Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 18 Apr 2012 13:49:20 +0300 Subject: [PATCH 026/365] usb: musb: drop __deprecated flag Looks like we cannot live without that double_buffer_not_ok flag due to many HW bugs this MUSB core has. So, let's drop the __deprecated flag to avoid annoying compile warnings. Signed-off-by: Felipe Balbi --- drivers/usb/musb/musb_core.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index 93de517a32a0..f4a40f001c88 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -449,7 +449,7 @@ struct musb { * We added this flag to forcefully disable double * buffering until we get it working. */ - unsigned double_buffer_not_ok:1 __deprecated; + unsigned double_buffer_not_ok:1; struct musb_hdrc_config *config; From c67dd31c5cc745e72d033c0e7d4a2da67c90cd88 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 16 Apr 2012 17:03:10 +0200 Subject: [PATCH 027/365] usb: musb: davinci.c: add missing unregister usb_nop_xceiv_unregister is needed on failure of usb_get_transceiver, as done in other error-handling code in the same function. Signed-off-by: Julia Lawall Signed-off-by: Felipe Balbi --- drivers/usb/musb/davinci.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c index 97ab975fa442..768b4b55c816 100644 --- a/drivers/usb/musb/davinci.c +++ b/drivers/usb/musb/davinci.c @@ -386,7 +386,7 @@ static int davinci_musb_init(struct musb *musb) usb_nop_xceiv_register(); musb->xceiv = usb_get_transceiver(); if (!musb->xceiv) - return -ENODEV; + goto unregister; musb->mregs += DAVINCI_BASE_OFFSET; @@ -444,6 +444,7 @@ static int davinci_musb_init(struct musb *musb) fail: usb_put_transceiver(musb->xceiv); +unregister: usb_nop_xceiv_unregister(); return -ENODEV; } From b435092f70ec5ebbfb6d075d5bf3c631b49a51de Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 18 Apr 2012 12:08:23 +0200 Subject: [PATCH 028/365] tick: Fix oneshot broadcast setup really Sven Joachim reported, that suspend/resume on rc3 trips over a NULL pointer dereference. Linus spotted the clockevent handler being NULL. commit fa4da365b(clockevents: tTack broadcast device mode change in tick_broadcast_switch_to_oneshot()) tried to fix a problem with the broadcast device setup, which was introduced in commit 77b0d60c5( clockevents: Leave the broadcast device in shutdown mode when not needed). The initial commit avoided to set up the broadcast device when no broadcast request bits were set, but that left the broadcast device disfunctional. In consequence deep idle states which need the broadcast device were not woken up. commit fa4da365b tried to fix that by initializing the state of the broadcast facility, but that missed the fact, that nothing initializes the event handler and some other state of the underlying clock event device. The fix is to revert both commits and make only the mode setting of the clock event device conditional on the state of active broadcast users. That initializes everything except the low level device mode, but this happens when the broadcast functionality is invoked by deep idle. Reported-and-tested-by: Sven Joachim Signed-off-by: Thomas Gleixner Cc: Rafael J. Wysocki Cc: Linus Torvalds Cc: Suresh Siddha Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1204181205540.2542@ionos --- kernel/time/tick-broadcast.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c index bf57abdc7bd0..119aca5c6845 100644 --- a/kernel/time/tick-broadcast.c +++ b/kernel/time/tick-broadcast.c @@ -531,7 +531,6 @@ void tick_broadcast_setup_oneshot(struct clock_event_device *bc) int was_periodic = bc->mode == CLOCK_EVT_MODE_PERIODIC; bc->event_handler = tick_handle_oneshot_broadcast; - clockevents_set_mode(bc, CLOCK_EVT_MODE_ONESHOT); /* Take the do_timer update */ tick_do_timer_cpu = cpu; @@ -549,6 +548,7 @@ void tick_broadcast_setup_oneshot(struct clock_event_device *bc) to_cpumask(tmpmask)); if (was_periodic && !cpumask_empty(to_cpumask(tmpmask))) { + clockevents_set_mode(bc, CLOCK_EVT_MODE_ONESHOT); tick_broadcast_init_next_event(to_cpumask(tmpmask), tick_next_period); tick_broadcast_set_event(tick_next_period, 1); @@ -577,15 +577,10 @@ void tick_broadcast_switch_to_oneshot(void) raw_spin_lock_irqsave(&tick_broadcast_lock, flags); tick_broadcast_device.mode = TICKDEV_MODE_ONESHOT; - - if (cpumask_empty(tick_get_broadcast_mask())) - goto end; - bc = tick_broadcast_device.evtdev; if (bc) tick_broadcast_setup_oneshot(bc); -end: raw_spin_unlock_irqrestore(&tick_broadcast_lock, flags); } From adae0fe0ea87e8fb1a72dde304937c60759b495f Mon Sep 17 00:00:00 2001 From: Stanislav Kinsbursky Date: Thu, 5 Apr 2012 21:04:37 +0400 Subject: [PATCH 029/365] SUNRPC: register PipeFS file system after pernet sybsystem PipeFS superblock creation routine relays on SUNRPC pernet data presense, which is created on register_pernet_subsys() call in SUNRPC module init function. Registering of PipeFS filesystem prior to registering of per-net subsystem leads to races (mount of PipeFS can dereference uninitialized data). Signed-off-by: Stanislav Kinsbursky Signed-off-by: Trond Myklebust --- net/sunrpc/sunrpc_syms.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) diff --git a/net/sunrpc/sunrpc_syms.c b/net/sunrpc/sunrpc_syms.c index 8adfc88e793a..3d6498af9adc 100644 --- a/net/sunrpc/sunrpc_syms.c +++ b/net/sunrpc/sunrpc_syms.c @@ -75,19 +75,20 @@ static struct pernet_operations sunrpc_net_ops = { static int __init init_sunrpc(void) { - int err = register_rpc_pipefs(); + int err = rpc_init_mempool(); if (err) goto out; - err = rpc_init_mempool(); - if (err) - goto out2; err = rpcauth_init_module(); if (err) - goto out3; + goto out2; cache_initialize(); err = register_pernet_subsys(&sunrpc_net_ops); + if (err) + goto out3; + + err = register_rpc_pipefs(); if (err) goto out4; #ifdef RPC_DEBUG @@ -98,11 +99,11 @@ init_sunrpc(void) return 0; out4: - rpcauth_remove_module(); + unregister_pernet_subsys(&sunrpc_net_ops); out3: - rpc_destroy_mempool(); + rpcauth_remove_module(); out2: - unregister_rpc_pipefs(); + rpc_destroy_mempool(); out: return err; } From ca138f368a36dba40d3ef4a53d64af2011cda3c7 Mon Sep 17 00:00:00 2001 From: Fred Isaman Date: Thu, 5 Apr 2012 15:26:36 -0400 Subject: [PATCH 030/365] NFS: check for req==NULL in nfs_try_to_update_request cleanup Signed-off-by: Fred Isaman Signed-off-by: Trond Myklebust --- fs/nfs/write.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/nfs/write.c b/fs/nfs/write.c index 2c68818f68ac..9b8d4d42a8af 100644 --- a/fs/nfs/write.c +++ b/fs/nfs/write.c @@ -682,7 +682,8 @@ static struct nfs_page *nfs_try_to_update_request(struct inode *inode, req->wb_bytes = rqend - req->wb_offset; out_unlock: spin_unlock(&inode->i_lock); - nfs_clear_request_commit(req); + if (req) + nfs_clear_request_commit(req); return req; out_flushme: spin_unlock(&inode->i_lock); From cbf2829b61c136edcba302a5e1b6b40e97d32c00 Mon Sep 17 00:00:00 2001 From: Bryan O'Donoghue Date: Wed, 18 Apr 2012 17:37:39 +0100 Subject: [PATCH 031/365] x86, apic: APIC code touches invalid MSR on P5 class machines Current APIC code assumes MSR_IA32_APICBASE is present for all systems. Pentium Classic P5 and friends didn't have this MSR. MSR_IA32_APICBASE was introduced as an architectural MSR by Intel @ P6. Code paths that can touch this MSR invalidly are when vendor == Intel && cpu-family == 5 and APIC bit is set in CPUID - or when you simply pass lapic on the kernel command line, on a P5. The below patch stops Linux incorrectly interfering with the MSR_IA32_APICBASE for P5 class machines. Other code paths exist that touch the MSR - however those paths are not currently reachable for a conformant P5. Signed-off-by: Bryan O'Donoghue Link: http://lkml.kernel.org/r/4F8EEDD3.1080404@linux.intel.com Signed-off-by: H. Peter Anvin Cc: --- arch/x86/kernel/apic/apic.c | 34 ++++++++++++++++++++-------------- 1 file changed, 20 insertions(+), 14 deletions(-) diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 11544d8f1e97..edc24480469f 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -1637,9 +1637,11 @@ static int __init apic_verify(void) mp_lapic_addr = APIC_DEFAULT_PHYS_BASE; /* The BIOS may have set up the APIC at some other address */ - rdmsr(MSR_IA32_APICBASE, l, h); - if (l & MSR_IA32_APICBASE_ENABLE) - mp_lapic_addr = l & MSR_IA32_APICBASE_BASE; + if (boot_cpu_data.x86 >= 6) { + rdmsr(MSR_IA32_APICBASE, l, h); + if (l & MSR_IA32_APICBASE_ENABLE) + mp_lapic_addr = l & MSR_IA32_APICBASE_BASE; + } pr_info("Found and enabled local APIC!\n"); return 0; @@ -1657,13 +1659,15 @@ int __init apic_force_enable(unsigned long addr) * MSR. This can only be done in software for Intel P6 or later * and AMD K7 (Model > 1) or later. */ - rdmsr(MSR_IA32_APICBASE, l, h); - if (!(l & MSR_IA32_APICBASE_ENABLE)) { - pr_info("Local APIC disabled by BIOS -- reenabling.\n"); - l &= ~MSR_IA32_APICBASE_BASE; - l |= MSR_IA32_APICBASE_ENABLE | addr; - wrmsr(MSR_IA32_APICBASE, l, h); - enabled_via_apicbase = 1; + if (boot_cpu_data.x86 >= 6) { + rdmsr(MSR_IA32_APICBASE, l, h); + if (!(l & MSR_IA32_APICBASE_ENABLE)) { + pr_info("Local APIC disabled by BIOS -- reenabling.\n"); + l &= ~MSR_IA32_APICBASE_BASE; + l |= MSR_IA32_APICBASE_ENABLE | addr; + wrmsr(MSR_IA32_APICBASE, l, h); + enabled_via_apicbase = 1; + } } return apic_verify(); } @@ -2209,10 +2213,12 @@ static void lapic_resume(void) * FIXME! This will be wrong if we ever support suspend on * SMP! We'll need to do this as part of the CPU restore! */ - rdmsr(MSR_IA32_APICBASE, l, h); - l &= ~MSR_IA32_APICBASE_BASE; - l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr; - wrmsr(MSR_IA32_APICBASE, l, h); + if (boot_cpu_data.x86 >= 6) { + rdmsr(MSR_IA32_APICBASE, l, h); + l &= ~MSR_IA32_APICBASE_BASE; + l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr; + wrmsr(MSR_IA32_APICBASE, l, h); + } } maxlvt = lapic_get_maxlvt(); From 848cce0d4102b5b4b26b0987b43e1919d462afe2 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Tue, 21 Feb 2012 17:04:28 +0800 Subject: [PATCH 032/365] Btrfs: avoid setting ->d_op twice Follow those instructions, and you'll trigger a warning in the beginning of d_set_d_op(): # mkfs.btrfs /dev/loop3 # mount /dev/loop3 /mnt # btrfs sub create /mnt/sub # btrfs sub snap /mnt /mnt/snap # touch /mnt/snap/sub touch: cannot touch `tmp': Permission denied __d_alloc() set d_op to sb->s_d_op (btrfs_dentry_operations), and then simple_lookup() reset it to simple_dentry_operations, which triggered the warning. Signed-off-by: Li Zefan --- fs/btrfs/inode.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 1be31368e881..a682c267576d 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -4069,7 +4069,7 @@ static struct inode *new_simple_dir(struct super_block *s, BTRFS_I(inode)->dummy_inode = 1; inode->i_ino = BTRFS_EMPTY_SUBVOL_DIR_OBJECTID; - inode->i_op = &simple_dir_inode_operations; + inode->i_op = &btrfs_dir_ro_inode_operations; inode->i_fop = &simple_dir_operations; inode->i_mode = S_IFDIR | S_IRUGO | S_IWUSR | S_IXUGO; inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME; @@ -4140,14 +4140,18 @@ struct inode *btrfs_lookup_dentry(struct inode *dir, struct dentry *dentry) static int btrfs_dentry_delete(const struct dentry *dentry) { struct btrfs_root *root; + struct inode *inode = dentry->d_inode; - if (!dentry->d_inode && !IS_ROOT(dentry)) - dentry = dentry->d_parent; + if (!inode && !IS_ROOT(dentry)) + inode = dentry->d_parent->d_inode; - if (dentry->d_inode) { - root = BTRFS_I(dentry->d_inode)->root; + if (inode) { + root = BTRFS_I(inode)->root; if (btrfs_root_refs(&root->root_item) == 0) return 1; + + if (btrfs_ino(inode) == BTRFS_EMPTY_SUBVOL_DIR_OBJECTID) + return 1; } return 0; } From 8c9c2bf7a3c4f7e9d158c0be9c49f372fb943ad2 Mon Sep 17 00:00:00 2001 From: Arne Jansen Date: Sat, 25 Feb 2012 09:09:30 +0100 Subject: [PATCH 033/365] btrfs: fix race in reada When inserting into the radix tree returns EEXIST, get the existing entry without giving up the spinlock in between. There was a race for both the zones trees and the extent tree. Signed-off-by: Arne Jansen --- fs/btrfs/inode.c | 8 +++++++- fs/btrfs/reada.c | 35 ++++++++++++++++------------------- 2 files changed, 23 insertions(+), 20 deletions(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index a682c267576d..98ee5a51aa29 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -4332,7 +4332,13 @@ static int btrfs_real_readdir(struct file *filp, void *dirent, } no_dentry: /* is this a reference to our own snapshot? If so - * skip it + * skip it. + * + * In contrast to old kernels, we insert the snapshot's + * dir item and dir index after it has been created, so + * we won't find a reference to our own snapshot. We + * still keep the following code for backward + * compatibility. */ if (location.type == BTRFS_ROOT_ITEM_KEY && location.objectid == root->root_key.objectid) { diff --git a/fs/btrfs/reada.c b/fs/btrfs/reada.c index dc5d33146fdb..8dec650099c8 100644 --- a/fs/btrfs/reada.c +++ b/fs/btrfs/reada.c @@ -250,14 +250,12 @@ static struct reada_zone *reada_find_zone(struct btrfs_fs_info *fs_info, struct btrfs_bio *bbio) { int ret; - int looped = 0; struct reada_zone *zone; struct btrfs_block_group_cache *cache = NULL; u64 start; u64 end; int i; -again: zone = NULL; spin_lock(&fs_info->reada_lock); ret = radix_tree_gang_lookup(&dev->reada_zones, (void **)&zone, @@ -274,9 +272,6 @@ again: spin_unlock(&fs_info->reada_lock); } - if (looped) - return NULL; - cache = btrfs_lookup_block_group(fs_info, logical); if (!cache) return NULL; @@ -307,13 +302,15 @@ again: ret = radix_tree_insert(&dev->reada_zones, (unsigned long)(zone->end >> PAGE_CACHE_SHIFT), zone); - spin_unlock(&fs_info->reada_lock); - if (ret) { + if (ret == -EEXIST) { kfree(zone); - looped = 1; - goto again; + ret = radix_tree_gang_lookup(&dev->reada_zones, (void **)&zone, + logical >> PAGE_CACHE_SHIFT, 1); + if (ret == 1) + kref_get(&zone->refcnt); } + spin_unlock(&fs_info->reada_lock); return zone; } @@ -323,8 +320,8 @@ static struct reada_extent *reada_find_extent(struct btrfs_root *root, struct btrfs_key *top, int level) { int ret; - int looped = 0; struct reada_extent *re = NULL; + struct reada_extent *re_exist = NULL; struct btrfs_fs_info *fs_info = root->fs_info; struct btrfs_mapping_tree *map_tree = &fs_info->mapping_tree; struct btrfs_bio *bbio = NULL; @@ -335,14 +332,13 @@ static struct reada_extent *reada_find_extent(struct btrfs_root *root, int i; unsigned long index = logical >> PAGE_CACHE_SHIFT; -again: spin_lock(&fs_info->reada_lock); re = radix_tree_lookup(&fs_info->reada_tree, index); if (re) kref_get(&re->refcnt); spin_unlock(&fs_info->reada_lock); - if (re || looped) + if (re) return re; re = kzalloc(sizeof(*re), GFP_NOFS); @@ -398,12 +394,15 @@ again: /* insert extent in reada_tree + all per-device trees, all or nothing */ spin_lock(&fs_info->reada_lock); ret = radix_tree_insert(&fs_info->reada_tree, index, re); + if (ret == -EEXIST) { + re_exist = radix_tree_lookup(&fs_info->reada_tree, index); + BUG_ON(!re_exist); + kref_get(&re_exist->refcnt); + spin_unlock(&fs_info->reada_lock); + goto error; + } if (ret) { spin_unlock(&fs_info->reada_lock); - if (ret != -ENOMEM) { - /* someone inserted the extent in the meantime */ - looped = 1; - } goto error; } for (i = 0; i < nzones; ++i) { @@ -450,9 +449,7 @@ error: } kfree(bbio); kfree(re); - if (looped) - goto again; - return NULL; + return re_exist; } static void reada_kref_dummy(struct kref *kr) From 207a232ccac0a8cb79d304bd17298dbc96e2e082 Mon Sep 17 00:00:00 2001 From: Arne Jansen Date: Sat, 25 Feb 2012 09:09:47 +0100 Subject: [PATCH 034/365] btrfs: don't add both copies of DUP to reada extent tree Normally when there are 2 copies of a block, we add both to the reada extent tree and prefetch only the one that is easier to reach. This way we can better utilize multiple devices. In case of DUP this makes no sense as both copies reside on the same device. Signed-off-by: Arne Jansen --- fs/btrfs/reada.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/fs/btrfs/reada.c b/fs/btrfs/reada.c index 8dec650099c8..ac5d01085884 100644 --- a/fs/btrfs/reada.c +++ b/fs/btrfs/reada.c @@ -326,6 +326,7 @@ static struct reada_extent *reada_find_extent(struct btrfs_root *root, struct btrfs_mapping_tree *map_tree = &fs_info->mapping_tree; struct btrfs_bio *bbio = NULL; struct btrfs_device *dev; + struct btrfs_device *prev_dev; u32 blocksize; u64 length; int nzones = 0; @@ -405,8 +406,20 @@ static struct reada_extent *reada_find_extent(struct btrfs_root *root, spin_unlock(&fs_info->reada_lock); goto error; } + prev_dev = NULL; for (i = 0; i < nzones; ++i) { dev = bbio->stripes[i].dev; + if (dev == prev_dev) { + /* + * in case of DUP, just add the first zone. As both + * are on the same device, there's nothing to gain + * from adding both. + * Also, it wouldn't work, as the tree is per device + * and adding would fail with EEXIST + */ + continue; + } + prev_dev = dev; ret = radix_tree_insert(&dev->reada_extents, index, re); if (ret) { while (--i >= 0) { From 8d082fb727ac11930ea20bf1612e334ea7c2b697 Mon Sep 17 00:00:00 2001 From: Liu Bo Date: Tue, 3 Apr 2012 09:56:53 +0800 Subject: [PATCH 035/365] Btrfs: do not mount when we have a sectorsize unequal to PAGE_SIZE Our code is not ready to cope with a sectorsize that's not equal to PAGE_SIZE. It will lead to hanging-on while writing something. Signed-off-by: Liu Bo --- fs/btrfs/disk-io.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 20196f411206..b9866f27ebd7 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -2254,9 +2254,9 @@ int open_ctree(struct super_block *sb, goto fail_sb_buffer; } - if (sectorsize < PAGE_SIZE) { - printk(KERN_WARNING "btrfs: Incompatible sector size " - "found on %s\n", sb->s_id); + if (sectorsize != PAGE_SIZE) { + printk(KERN_WARNING "btrfs: Incompatible sector size(%lu) " + "found on %s\n", (unsigned long)sectorsize, sb->s_id); goto fail_sb_buffer; } From 871383be592ba7e819d27556591e315a0df38cee Mon Sep 17 00:00:00 2001 From: David Sterba Date: Mon, 2 Apr 2012 18:31:37 +0200 Subject: [PATCH 036/365] btrfs: add missing unlocks to transaction abort paths Added in commit 49b25e0540904be0bf558b84475c69d72e4de66e ("btrfs: enhance transaction abort infrastructure") Reported-by: Dan Carpenter Signed-off-by: David Sterba --- fs/btrfs/transaction.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c index 11b77a59db62..36422254ef67 100644 --- a/fs/btrfs/transaction.c +++ b/fs/btrfs/transaction.c @@ -73,8 +73,10 @@ loop: cur_trans = root->fs_info->running_transaction; if (cur_trans) { - if (cur_trans->aborted) + if (cur_trans->aborted) { + spin_unlock(&root->fs_info->trans_lock); return cur_trans->aborted; + } atomic_inc(&cur_trans->use_count); atomic_inc(&cur_trans->num_writers); cur_trans->num_joined++; @@ -1400,6 +1402,7 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans, ret = commit_fs_roots(trans, root); if (ret) { mutex_unlock(&root->fs_info->tree_log_mutex); + mutex_unlock(&root->fs_info->reloc_mutex); goto cleanup_transaction; } @@ -1411,6 +1414,7 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans, ret = commit_cowonly_roots(trans, root); if (ret) { mutex_unlock(&root->fs_info->tree_log_mutex); + mutex_unlock(&root->fs_info->reloc_mutex); goto cleanup_transaction; } From 8e52acf70459020d7e9e9fda25066be4da520943 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Mon, 12 Mar 2012 16:39:28 +0800 Subject: [PATCH 037/365] Btrfs: retrurn void from clear_state_bit Currently it returns a set of bits that were cleared, but this return value is not used at all. Moreover it doesn't seem to be useful, because we may clear the bits of a few extent_states, but only the cleared bits of last one is returned. Signed-off-by: Li Zefan --- fs/btrfs/extent_io.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index 4789770f8eaf..05951bdf72cc 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -404,18 +404,16 @@ static int split_state(struct extent_io_tree *tree, struct extent_state *orig, /* * utility function to clear some bits in an extent state struct. - * it will optionally wake up any one waiting on this state (wake == 1), or - * forcibly remove the state from the tree (delete == 1). + * it will optionally wake up any one waiting on this state (wake == 1) * * If no bits are set on the state struct after clearing things, the * struct is freed and removed from the tree */ -static int clear_state_bit(struct extent_io_tree *tree, +static void clear_state_bit(struct extent_io_tree *tree, struct extent_state *state, int *bits, int wake) { int bits_to_clear = *bits & ~EXTENT_CTLBITS; - int ret = state->state & bits_to_clear; if ((bits_to_clear & EXTENT_DIRTY) && (state->state & EXTENT_DIRTY)) { u64 range = state->end - state->start + 1; @@ -437,7 +435,6 @@ static int clear_state_bit(struct extent_io_tree *tree, } else { merge_state(tree, state); } - return ret; } static struct extent_state * From cdc6a3952558f00b1bc3b6401e1cf98797632fe2 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Mon, 12 Mar 2012 16:39:48 +0800 Subject: [PATCH 038/365] Btrfs: avoid possible use-after-free in clear_extent_bit() clear_extent_bit() { next_node = rb_next(&state->rb_node); ... clear_state_bit(state); <-- this may free next_node if (next_node) { state = rb_entry(next_node); ... } } clear_state_bit() calls merge_state() which may free the next node of the passing extent_state, so clear_extent_bit() may end up referencing freed memory. Signed-off-by: Li Zefan --- fs/btrfs/extent_io.c | 36 +++++++++++++++++++++--------------- 1 file changed, 21 insertions(+), 15 deletions(-) diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index 05951bdf72cc..11eeb81fe695 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -402,6 +402,15 @@ static int split_state(struct extent_io_tree *tree, struct extent_state *orig, return 0; } +static struct extent_state *next_state(struct extent_state *state) +{ + struct rb_node *next = rb_next(&state->rb_node); + if (next) + return rb_entry(next, struct extent_state, rb_node); + else + return NULL; +} + /* * utility function to clear some bits in an extent state struct. * it will optionally wake up any one waiting on this state (wake == 1) @@ -409,10 +418,11 @@ static int split_state(struct extent_io_tree *tree, struct extent_state *orig, * If no bits are set on the state struct after clearing things, the * struct is freed and removed from the tree */ -static void clear_state_bit(struct extent_io_tree *tree, - struct extent_state *state, - int *bits, int wake) +static struct extent_state *clear_state_bit(struct extent_io_tree *tree, + struct extent_state *state, + int *bits, int wake) { + struct extent_state *next; int bits_to_clear = *bits & ~EXTENT_CTLBITS; if ((bits_to_clear & EXTENT_DIRTY) && (state->state & EXTENT_DIRTY)) { @@ -425,6 +435,7 @@ static void clear_state_bit(struct extent_io_tree *tree, if (wake) wake_up(&state->wq); if (state->state == 0) { + next = next_state(state); if (state->tree) { rb_erase(&state->rb_node, &tree->state); state->tree = NULL; @@ -434,7 +445,9 @@ static void clear_state_bit(struct extent_io_tree *tree, } } else { merge_state(tree, state); + next = next_state(state); } + return next; } static struct extent_state * @@ -473,7 +486,6 @@ int clear_extent_bit(struct extent_io_tree *tree, u64 start, u64 end, struct extent_state *state; struct extent_state *cached; struct extent_state *prealloc = NULL; - struct rb_node *next_node; struct rb_node *node; u64 last_end; int err; @@ -525,14 +537,11 @@ hit_next: WARN_ON(state->end < start); last_end = state->end; - if (state->end < end && !need_resched()) - next_node = rb_next(&state->rb_node); - else - next_node = NULL; - /* the state doesn't have the wanted bits, go ahead */ - if (!(state->state & bits)) + if (!(state->state & bits)) { + state = next_state(state); goto next; + } /* * | ---- desired range ---- | @@ -590,16 +599,13 @@ hit_next: goto out; } - clear_state_bit(tree, state, &bits, wake); + state = clear_state_bit(tree, state, &bits, wake); next: if (last_end == (u64)-1) goto out; start = last_end + 1; - if (start <= end && next_node) { - state = rb_entry(next_node, struct extent_state, - rb_node); + if (start <= end && state && !need_resched()) goto hit_next; - } goto search_again; out: From 4735fb282830c0966b301dabcccf4753fa6604bb Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Thu, 12 Apr 2012 22:47:52 +0200 Subject: [PATCH 039/365] Btrfs: Make free_ipath() deal gracefully with NULL pointers Make free_ipath() behave like most other freeing functions in the kernel and gracefully do nothing when passed a NULL pointer. Besides this making the bahaviour consistent with functions such as kfree(), vfree(), btrfs_free_path() etc etc, it also fixes a real NULL deref issue in fs/btrfs/ioctl.c::btrfs_ioctl_ino_to_path(). In that function we have this code: ... ipath = init_ipath(size, root, path); if (IS_ERR(ipath)) { ret = PTR_ERR(ipath); ipath = NULL; goto out; } ... out: btrfs_free_path(path); free_ipath(ipath); ... If we ever take the true branch of that 'if' statement we'll end up passing a NULL pointer to free_ipath() which will subsequently dereference it and we'll go "Boom" :-( This patch will avoid that. Signed-off-by: Jesper Juhl --- fs/btrfs/backref.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/btrfs/backref.c b/fs/btrfs/backref.c index f4e90748940a..b332ff04c5ee 100644 --- a/fs/btrfs/backref.c +++ b/fs/btrfs/backref.c @@ -1414,6 +1414,8 @@ struct inode_fs_paths *init_ipath(s32 total_bytes, struct btrfs_root *fs_root, void free_ipath(struct inode_fs_paths *ipath) { + if (!ipath) + return; kfree(ipath->fspath); kfree(ipath); } From aefc1eb13ebbb86c5ffade8a9e2425cd71032d7e Mon Sep 17 00:00:00 2001 From: Jan Schmidt Date: Fri, 13 Apr 2012 12:28:00 +0200 Subject: [PATCH 040/365] Btrfs: don't call free_extent_buffer twice in iterate_irefs Avoid calling free_extent_buffer more than once when the iterator function returns non-zero. The only code that uses this is scrub repair for corrupted nodatasum blocks. Signed-off-by: Jan Schmidt --- fs/btrfs/backref.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/fs/btrfs/backref.c b/fs/btrfs/backref.c index b332ff04c5ee..fb56bcc80377 100644 --- a/fs/btrfs/backref.c +++ b/fs/btrfs/backref.c @@ -1247,7 +1247,7 @@ static int iterate_irefs(u64 inum, struct btrfs_root *fs_root, struct btrfs_path *path, iterate_irefs_t *iterate, void *ctx) { - int ret; + int ret = 0; int slot; u32 cur; u32 len; @@ -1259,7 +1259,7 @@ static int iterate_irefs(u64 inum, struct btrfs_root *fs_root, struct btrfs_inode_ref *iref; struct btrfs_key found_key; - while (1) { + while (!ret) { ret = inode_ref_info(inum, parent ? parent+1 : 0, fs_root, path, &found_key); if (ret < 0) @@ -1288,10 +1288,8 @@ static int iterate_irefs(u64 inum, struct btrfs_root *fs_root, (unsigned long long)found_key.objectid, (unsigned long long)fs_root->objectid); ret = iterate(parent, iref, eb, ctx); - if (ret) { - free_extent_buffer(eb); + if (ret) break; - } len = sizeof(*iref) + name_len; iref = (struct btrfs_inode_ref *)((char *)iref + len); } From b916a59adfdc875381b68ced258694b434cf43ae Mon Sep 17 00:00:00 2001 From: Jan Schmidt Date: Fri, 13 Apr 2012 12:28:08 +0200 Subject: [PATCH 041/365] Btrfs: add missing read locks in backref.c iref_to_path and iterate_irefs both increment the eb's refcount to use it after releasing the path. Both depend on consistent data remaining in the extent buffer and need a read lock to protect it. Signed-off-by: Jan Schmidt --- fs/btrfs/backref.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/backref.c b/fs/btrfs/backref.c index fb56bcc80377..bcec06750232 100644 --- a/fs/btrfs/backref.c +++ b/fs/btrfs/backref.c @@ -22,6 +22,7 @@ #include "ulist.h" #include "transaction.h" #include "delayed-ref.h" +#include "locking.h" /* * this structure records all encountered refs on the way up to the root @@ -893,18 +894,22 @@ static char *iref_to_path(struct btrfs_root *fs_root, struct btrfs_path *path, s64 bytes_left = size - 1; struct extent_buffer *eb = eb_in; struct btrfs_key found_key; + int leave_spinning = path->leave_spinning; if (bytes_left >= 0) dest[bytes_left] = '\0'; + path->leave_spinning = 1; while (1) { len = btrfs_inode_ref_name_len(eb, iref); bytes_left -= len; if (bytes_left >= 0) read_extent_buffer(eb, dest + bytes_left, (unsigned long)(iref + 1), len); - if (eb != eb_in) + if (eb != eb_in) { + btrfs_tree_read_unlock_blocking(eb); free_extent_buffer(eb); + } ret = inode_ref_info(parent, 0, fs_root, path, &found_key); if (ret > 0) ret = -ENOENT; @@ -919,8 +924,11 @@ static char *iref_to_path(struct btrfs_root *fs_root, struct btrfs_path *path, slot = path->slots[0]; eb = path->nodes[0]; /* make sure we can use eb after releasing the path */ - if (eb != eb_in) + if (eb != eb_in) { atomic_inc(&eb->refs); + btrfs_tree_read_lock(eb); + btrfs_set_lock_blocking_rw(eb, BTRFS_READ_LOCK); + } btrfs_release_path(path); iref = btrfs_item_ptr(eb, slot, struct btrfs_inode_ref); @@ -931,6 +939,7 @@ static char *iref_to_path(struct btrfs_root *fs_root, struct btrfs_path *path, } btrfs_release_path(path); + path->leave_spinning = leave_spinning; if (ret) return ERR_PTR(ret); @@ -1260,6 +1269,7 @@ static int iterate_irefs(u64 inum, struct btrfs_root *fs_root, struct btrfs_key found_key; while (!ret) { + path->leave_spinning = 1; ret = inode_ref_info(inum, parent ? parent+1 : 0, fs_root, path, &found_key); if (ret < 0) @@ -1275,6 +1285,8 @@ static int iterate_irefs(u64 inum, struct btrfs_root *fs_root, eb = path->nodes[0]; /* make sure we can use eb after releasing the path */ atomic_inc(&eb->refs); + btrfs_tree_read_lock(eb); + btrfs_set_lock_blocking_rw(eb, BTRFS_READ_LOCK); btrfs_release_path(path); item = btrfs_item_nr(eb, slot); @@ -1293,6 +1305,7 @@ static int iterate_irefs(u64 inum, struct btrfs_root *fs_root, len = sizeof(*iref) + name_len; iref = (struct btrfs_inode_ref *)((char *)iref + len); } + btrfs_tree_read_unlock_blocking(eb); free_extent_buffer(eb); } From 37db63a400d3bac467795aa43901065fd8d903b7 Mon Sep 17 00:00:00 2001 From: Ilya Dryomov Date: Fri, 13 Apr 2012 17:05:08 +0300 Subject: [PATCH 042/365] Btrfs: fix max chunk size check in chunk allocator Fix a bug, where in case we need to adjust stripe_size so that the length of the resulting chunk is less than or equal to max_chunk_size, DUP chunks turn out to be only half as big as they could be. Cc: Arne Jansen Signed-off-by: Ilya Dryomov --- fs/btrfs/volumes.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index 759d02486d7c..ce289af526f0 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -3324,12 +3324,14 @@ static int __btrfs_alloc_chunk(struct btrfs_trans_handle *trans, stripe_size = devices_info[ndevs-1].max_avail; num_stripes = ndevs * dev_stripes; - if (stripe_size * num_stripes > max_chunk_size * ncopies) { + if (stripe_size * ndevs > max_chunk_size * ncopies) { stripe_size = max_chunk_size * ncopies; - do_div(stripe_size, num_stripes); + do_div(stripe_size, ndevs); } do_div(stripe_size, dev_stripes); + + /* align to BTRFS_STRIPE_LEN */ do_div(stripe_size, BTRFS_STRIPE_LEN); stripe_size *= BTRFS_STRIPE_LEN; From 8a3db1849e9e2563727ea2dc32737502e0096641 Mon Sep 17 00:00:00 2001 From: Sergei Trofimovich Date: Mon, 16 Apr 2012 06:44:37 +0300 Subject: [PATCH 043/365] btrfs: fix early abort in 'remount' Cc: Jeff Mahoney Cc: Chris Mason Cc: Josef Bacik Signed-off-by: Sergei Trofimovich --- fs/btrfs/super.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c index 84571d7da12e..43aa2dd0bc7d 100644 --- a/fs/btrfs/super.c +++ b/fs/btrfs/super.c @@ -1152,13 +1152,15 @@ static int btrfs_remount(struct super_block *sb, int *flags, char *data) if (ret) goto restore; } else { - if (fs_info->fs_devices->rw_devices == 0) + if (fs_info->fs_devices->rw_devices == 0) { ret = -EACCES; goto restore; + } - if (btrfs_super_log_root(fs_info->super_copy) != 0) + if (btrfs_super_log_root(fs_info->super_copy) != 0) { ret = -EINVAL; goto restore; + } ret = btrfs_cleanup_fs_roots(fs_info); if (ret) From 48d282326b3ce5f435835f5fb0e3231c399f4f9a Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sat, 14 Apr 2012 11:24:33 +0200 Subject: [PATCH 044/365] fs/btrfs/volumes.c: add missing free_fs_devices Free fs_devices as done in the error-handling code just below. Signed-off-by: Julia Lawall --- fs/btrfs/volumes.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index ce289af526f0..3b984173d25b 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -4352,8 +4352,10 @@ static int open_seed_devices(struct btrfs_root *root, u8 *fsid) ret = __btrfs_open_devices(fs_devices, FMODE_READ, root->fs_info->bdev_holder); - if (ret) + if (ret) { + free_fs_devices(fs_devices); goto out; + } if (!fs_devices->seeding) { __btrfs_close_devices(fs_devices); From 5cf1ab56133ad7b712673c071b439d4a555a2d1e Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Mon, 16 Apr 2012 09:42:26 -0400 Subject: [PATCH 045/365] Btrfs: always store the mirror we read the eb from A user reported a panic where we were trying to fix a bad mirror but the mirror number we were giving was 0, which is invalid. This is because we don't do the transid verification until after the read, so as far as the read code is concerned the read was a success. So instead store the mirror we read from so that if there is some failure post read we know which mirror to try next and which mirror needs to be fixed if we find a good copy of the block. Thanks, Signed-off-by: Josef Bacik --- fs/btrfs/disk-io.c | 16 ++++++++-------- fs/btrfs/extent_io.c | 15 ++++++--------- fs/btrfs/extent_io.h | 4 ++-- fs/btrfs/inode.c | 2 +- 4 files changed, 17 insertions(+), 20 deletions(-) diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index b9866f27ebd7..d0c969beaad4 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -383,17 +383,16 @@ static int btree_read_extent_buffer_pages(struct btrfs_root *root, if (test_bit(EXTENT_BUFFER_CORRUPT, &eb->bflags)) break; - if (!failed_mirror) { - failed = 1; - printk(KERN_ERR "failed mirror was %d\n", eb->failed_mirror); - failed_mirror = eb->failed_mirror; - } - num_copies = btrfs_num_copies(&root->fs_info->mapping_tree, eb->start, eb->len); if (num_copies == 1) break; + if (!failed_mirror) { + failed = 1; + failed_mirror = eb->read_mirror; + } + mirror_num++; if (mirror_num == failed_mirror) mirror_num++; @@ -564,7 +563,7 @@ struct extent_buffer *find_eb_for_page(struct extent_io_tree *tree, } static int btree_readpage_end_io_hook(struct page *page, u64 start, u64 end, - struct extent_state *state) + struct extent_state *state, int mirror) { struct extent_io_tree *tree; u64 found_start; @@ -589,6 +588,7 @@ static int btree_readpage_end_io_hook(struct page *page, u64 start, u64 end, if (!reads_done) goto err; + eb->read_mirror = mirror; if (test_bit(EXTENT_BUFFER_IOERR, &eb->bflags)) { ret = -EIO; goto err; @@ -652,7 +652,7 @@ static int btree_io_failed_hook(struct page *page, int failed_mirror) eb = (struct extent_buffer *)page->private; set_bit(EXTENT_BUFFER_IOERR, &eb->bflags); - eb->failed_mirror = failed_mirror; + eb->read_mirror = failed_mirror; if (test_and_clear_bit(EXTENT_BUFFER_READAHEAD, &eb->bflags)) btree_readahead_hook(root, eb, eb->start, -EIO); return -EIO; /* we fixed nothing */ diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index 11eeb81fe695..0c23e57077c6 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -2304,7 +2304,7 @@ static void end_bio_extent_readpage(struct bio *bio, int err) u64 start; u64 end; int whole_page; - int failed_mirror; + int mirror; int ret; if (err) @@ -2343,20 +2343,18 @@ static void end_bio_extent_readpage(struct bio *bio, int err) } spin_unlock(&tree->lock); + mirror = (int)(unsigned long)bio->bi_bdev; if (uptodate && tree->ops && tree->ops->readpage_end_io_hook) { ret = tree->ops->readpage_end_io_hook(page, start, end, - state); + state, mirror); if (ret) uptodate = 0; else clean_io_failure(start, page); } - if (!uptodate) - failed_mirror = (int)(unsigned long)bio->bi_bdev; - if (!uptodate && tree->ops && tree->ops->readpage_io_failed_hook) { - ret = tree->ops->readpage_io_failed_hook(page, failed_mirror); + ret = tree->ops->readpage_io_failed_hook(page, mirror); if (!ret && !err && test_bit(BIO_UPTODATE, &bio->bi_flags)) uptodate = 1; @@ -2371,8 +2369,7 @@ static void end_bio_extent_readpage(struct bio *bio, int err) * can't handle the error it will return -EIO and we * remain responsible for that page. */ - ret = bio_readpage_error(bio, page, start, end, - failed_mirror, NULL); + ret = bio_readpage_error(bio, page, start, end, mirror, NULL); if (ret == 0) { uptodate = test_bit(BIO_UPTODATE, &bio->bi_flags); @@ -4465,7 +4462,7 @@ int read_extent_buffer_pages(struct extent_io_tree *tree, } clear_bit(EXTENT_BUFFER_IOERR, &eb->bflags); - eb->failed_mirror = 0; + eb->read_mirror = 0; atomic_set(&eb->io_pages, num_reads); for (i = start_i; i < num_pages; i++) { page = extent_buffer_page(eb, i); diff --git a/fs/btrfs/extent_io.h b/fs/btrfs/extent_io.h index faf10eb57f75..b516c3b8dec6 100644 --- a/fs/btrfs/extent_io.h +++ b/fs/btrfs/extent_io.h @@ -79,7 +79,7 @@ struct extent_io_ops { u64 start, u64 end, struct extent_state *state); int (*readpage_end_io_hook)(struct page *page, u64 start, u64 end, - struct extent_state *state); + struct extent_state *state, int mirror); int (*writepage_end_io_hook)(struct page *page, u64 start, u64 end, struct extent_state *state, int uptodate); void (*set_bit_hook)(struct inode *inode, struct extent_state *state, @@ -135,7 +135,7 @@ struct extent_buffer { spinlock_t refs_lock; atomic_t refs; atomic_t io_pages; - int failed_mirror; + int read_mirror; struct list_head leak_list; struct rcu_head rcu_head; pid_t lock_owner; diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 98ee5a51aa29..d953f8820464 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -1947,7 +1947,7 @@ static int btrfs_writepage_end_io_hook(struct page *page, u64 start, u64 end, * extent_io.c will try to find good copies for us. */ static int btrfs_readpage_end_io_hook(struct page *page, u64 start, u64 end, - struct extent_state *state) + struct extent_state *state, int mirror) { size_t offset = start - ((u64)page->index << PAGE_CACHE_SHIFT); struct inode *inode = page->mapping->host; From 253beebd5a255e07d6a8b65515491f33664e82a2 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 18 Apr 2012 09:59:03 +0300 Subject: [PATCH 046/365] Btrfs: double unlock bug in error handling The caller expects this function to return with the lock held and releases it immediately on error. Signed-off-by: Dan Carpenter --- fs/btrfs/extent-tree.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 2b35f8d14bb9..a0bb9dcd3c36 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -2301,6 +2301,7 @@ static noinline int run_clustered_refs(struct btrfs_trans_handle *trans, if (ret) { printk(KERN_DEBUG "btrfs: run_delayed_extent_op returned %d\n", ret); + spin_lock(&delayed_refs->lock); return ret; } @@ -2331,6 +2332,7 @@ static noinline int run_clustered_refs(struct btrfs_trans_handle *trans, if (ret) { printk(KERN_DEBUG "btrfs: run_one_delayed_ref returned %d\n", ret); + spin_lock(&delayed_refs->lock); return ret; } From b9688bb8459b67e42327de6420edb405a9188775 Mon Sep 17 00:00:00 2001 From: Arne Jansen Date: Wed, 18 Apr 2012 10:27:16 +0200 Subject: [PATCH 047/365] btrfs: don't return EINTR It is basically a good thing if we are interruptible when waiting for free space, but the generality in which it is implemented currently leads to system calls being interruptible that are not documented this way. For example git can't handle interrupted unlink(), leading to corrupt repos under space pressure. Instead we raise the bar to only be interruptible by SIGKILL. Thanks to David Sterba for suggesting this. Signed-off-by: Arne Jansen --- fs/btrfs/extent-tree.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index a0bb9dcd3c36..84497f8eb043 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -3771,13 +3771,10 @@ again: */ if (current->journal_info) return -EAGAIN; - ret = wait_event_interruptible(space_info->wait, - !space_info->flush); - /* Must have been interrupted, return */ - if (ret) { - printk(KERN_DEBUG "btrfs: %s returning -EINTR\n", __func__); + ret = wait_event_killable(space_info->wait, !space_info->flush); + /* Must have been killed, return */ + if (ret) return -EINTR; - } spin_lock(&space_info->lock); } From 99ba55ad696944b37d5557bc5b4816890854fdb9 Mon Sep 17 00:00:00 2001 From: Stefan Behrens Date: Mon, 19 Mar 2012 16:17:22 +0100 Subject: [PATCH 048/365] Btrfs: fix btrfs_ioctl_dev_info() crash on missing device When a filesystem is mounted with the degraded option, it is possible that some of the devices are not there. btrfs_ioctl_dev_info() crashs in this case because the device name is a NULL pointer. This ioctl was only used for scrub. Signed-off-by: Stefan Behrens --- fs/btrfs/ioctl.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index 18cc23d164a8..14f8e1faa46e 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -2262,7 +2262,10 @@ static long btrfs_ioctl_dev_info(struct btrfs_root *root, void __user *arg) di_args->bytes_used = dev->bytes_used; di_args->total_bytes = dev->total_bytes; memcpy(di_args->uuid, dev->uuid, sizeof(di_args->uuid)); - strncpy(di_args->path, dev->name, sizeof(di_args->path)); + if (dev->name) + strncpy(di_args->path, dev->name, sizeof(di_args->path)); + else + di_args->path[0] = '\0'; out: if (ret == 0 && copy_to_user(arg, di_args, sizeof(*di_args))) From 5c84fc3c3914e9adfa6155a167c6c0c2709e6a62 Mon Sep 17 00:00:00 2001 From: Stefan Behrens Date: Fri, 30 Mar 2012 13:58:31 +0200 Subject: [PATCH 049/365] Btrfs: don't count CRC or header errors twice while scrubbing Each CRC or header error was counted twice, this is now fixed. Signed-off-by: Stefan Behrens --- fs/btrfs/scrub.c | 15 --------------- 1 file changed, 15 deletions(-) diff --git a/fs/btrfs/scrub.c b/fs/btrfs/scrub.c index 60f0e28db31e..b679bf68861e 100644 --- a/fs/btrfs/scrub.c +++ b/fs/btrfs/scrub.c @@ -1258,12 +1258,6 @@ static int scrub_checksum_data(struct scrub_block *sblock) if (memcmp(csum, on_disk_csum, sdev->csum_size)) fail = 1; - if (fail) { - spin_lock(&sdev->stat_lock); - ++sdev->stat.csum_errors; - spin_unlock(&sdev->stat_lock); - } - return fail; } @@ -1336,15 +1330,6 @@ static int scrub_checksum_tree_block(struct scrub_block *sblock) if (memcmp(calculated_csum, on_disk_csum, sdev->csum_size)) ++crc_fail; - if (crc_fail || fail) { - spin_lock(&sdev->stat_lock); - if (crc_fail) - ++sdev->stat.csum_errors; - if (fail) - ++sdev->stat.verify_errors; - spin_unlock(&sdev->stat_lock); - } - return fail || crc_fail; } From 25cd999e1a685dab65292afbe9fa24d790d8a859 Mon Sep 17 00:00:00 2001 From: Stefan Behrens Date: Fri, 30 Mar 2012 13:58:32 +0200 Subject: [PATCH 050/365] Btrfs: fix that check_int_data mount option was ignored The bitfield member mount_opt was too small by one bit to hold the mount option that enabled to include data extents in the integrity checker. Since the same issue happened when the BTRFS_MOUNT_PANIC_ON_FATAL_ERROR option was added (git rebase silently merges so that the increase of the size of the bitfield member is lost), the bit limit was removed entirely. Signed-off-by: Stefan Behrens --- fs/btrfs/ctree.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index 5b8ef8eb3521..ec42a24e935e 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -1078,7 +1078,7 @@ struct btrfs_fs_info { * is required instead of the faster short fsync log commits */ u64 last_trans_log_full_commit; - unsigned long mount_opt:21; + unsigned long mount_opt; unsigned long compress_type:4; u64 max_inline; u64 alloc_start; From 1bc68a9e80a7b1ab8dbf1a97e43c5d6a99070bb3 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Mon, 16 Apr 2012 00:52:51 -0400 Subject: [PATCH 051/365] powerpc: fix system.h fallout in sysdev/scom.c [chroma_defconfig] The following shows up in chroma_defconfig: CC arch/powerpc/sysdev/scom.o arch/powerpc/sysdev/scom.c: In function 'scom_debug_init': arch/powerpc/sysdev/scom.c:182:36: error: 'powerpc_debugfs_root' undeclared (first use in this function) arch/powerpc/sysdev/scom.c:182:36: note: each undeclared identifier is reported only once for each function it appears in make[2]: *** [arch/powerpc/sysdev/scom.o] Error 1 make[1]: *** [arch/powerpc/sysdev/scom.o] Error 2 A bisect leads to commit 9ffc93f203c18a70623f21950f1dd473c9ec48cd "Remove all #inclusions of asm/system.h" Add the debug header which contains powerpc_debugfs_root. Acked-by: David Howells Signed-off-by: Paul Gortmaker --- arch/powerpc/sysdev/scom.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/powerpc/sysdev/scom.c b/arch/powerpc/sysdev/scom.c index 49a3ece1c6b3..702256a1ca11 100644 --- a/arch/powerpc/sysdev/scom.c +++ b/arch/powerpc/sysdev/scom.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include From 8d9a784d1e2c75e0dcae06f77a02f5e7bb547f3a Mon Sep 17 00:00:00 2001 From: Stuart Menefy Date: Tue, 14 Feb 2012 11:29:11 +0000 Subject: [PATCH 052/365] sh: Fix error synchronising kernel page tables The problem is caused by the interaction of two features in the Linux memory management code. A processes address space is described by a struct mm_struct, and every thread has a pointer to the mm it should run in. The exception to this are kernel threads, which don't have an mm, and so borrow the mm from the last thread which ran. The system is bootstrapped by the initial kernel thread using init's mm (even though init hasn't been created yet, its mm is the static init_mm). The other feature is how the kernel handles the page table which describes the portion of the address space which is only visible when executing inside the kernel, and which is shared by all threads. On the SH4 the only portion of the kernel's address space which described using the page table is called P3, from 0xc0000000 to 0xdfffffff. This portion of the address space is divided into three: - mappings for dma_alloc_coherent() - mappings for vmalloc() and ioremap() - fixmap mappings, primarily used in copy_user_pages() to create kernel mappings of user pages with the correct cache colour. To optimise the TLB miss handler we don't want to add an additional condition which checks whether the faulting address is in the user or the kernel portion of the address space, and so all page tables have a common portion which describes the kernel part of the address space. As the SH4 uses a two level page table, only the kernel portion of first level page table (the pgd entries) is duplicated. These all point to the same second level entries (the pte's), and so no memory is wasted. The reference page table for the kernel is called the swapper_pg_dir, and when a new page table is created for a new process the kernel portion of the page table is copied from swapper_pg_dir. This works fine when changes only occur in the second level of the kernel's page table, or the first level entries are created before any new user processes. However if a change occurs to the first level of the page table, and there are existing processes which don't have this entry in their page table, this new entry needs to be added. This is done on demand, when the kernel accesses a P3 address which isn't mapped using the current page table, the code in vmalloc_fault() copies the entry from the reference page table (swapper_pg_dir) into the current processes page table. The bug which this patch addresses is that the code in vmalloc_fault() was not copying addresses which fell in the dma_alloc_coherent() portion of the address space, and it should have been copying any P3 address. Why we hadn't seen this before, and what made this hard to reproduce, is that normally the kernel will have called dma_alloc_coherent(), and accessed the memory mapping created, before any user process runs. Typically drivers such as USB or SATA will have created and used mappings of this type during the kernel initialisation, when probing for the attached devices, before init runs. Ethernet is slightly different, as it normally only creates and accesses dma_alloc_coherent() mappings when the network is brought up, but if kernel level IP configuration is used this will also occur before any user space process runs. So the first reproduction of this problem which we saw was occurred when USB and SATA were removed from the kernel, and then bring up Ethernet from user space using ifconfig. I'd like to thank Joseph Bormolini who did the hard work reducing the problem to this simple to reproduce criteria. In your case the situation is slightly different, and turns out to depends on the exact kernel configuration (which we had) and your ramdisk contents (which we didn't - hence the need for some assumptions). In this case the problem is a side effect of kernel level module loading. Kernel subsystems sometimes trigger the load of kernel modules directly, for example the crypto subsystem tries to load the cryptomgr and MTD tries to load modules for Flash partitioning if these are not built into the kernel. This is done by the kernel creating a user process which runs insmod to try and load the appropriate module. In order for this to cause problems the system must be running with a initrd or initramfs, which contains an insmod executable - if the kernel can't find an insmod to run, no user process is created, and the problem doesn't occur. If an insmod is found, a process is created to run it, which will inherit the kernel portion of the swapper_pg_dir first level page table. It doesn't matter whether the inmod is successful or not, but when the the kernel scheduler context switches back to the kernel initialisation thread, the insmod's mm is 'borrowed' by the kernel thread, as it doesn't have an address space of its own. (Reference counting is used to ensure this mm is not destroyed, even though the user process which caused its creation may no longer exist.) If this address space doesn't have a first level page table entry for the consistent mappings, and a driver tries to access such a mapping, we are in the same situation as described above, except this time in a kernel thread rather than a user thread executing inside the kernel. See bugzilla: 15425, 15836, 15862, 16106, 16793 Signed-off-by: Stuart Menefy Signed-off-by: Paul Mundt --- arch/sh/mm/fault_32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sh/mm/fault_32.c b/arch/sh/mm/fault_32.c index 324eef93c900..e99b104d967a 100644 --- a/arch/sh/mm/fault_32.c +++ b/arch/sh/mm/fault_32.c @@ -86,7 +86,7 @@ static noinline int vmalloc_fault(unsigned long address) pte_t *pte_k; /* Make sure we are in vmalloc/module/P3 area: */ - if (!(address >= VMALLOC_START && address < P3_ADDR_MAX)) + if (!(address >= P3SEG && address < P3_ADDR_MAX)) return -1; /* From ac71311e65e2c4c2dbac76db698fecbee755b016 Mon Sep 17 00:00:00 2001 From: AceLan Kao Date: Thu, 19 Apr 2012 14:53:45 +0800 Subject: [PATCH 053/365] Bluetooth: Add support for AR3012 [0cf3:e004] Add another vendor specific ID for Atheros AR3012 output of usb-devices: T: Bus=02 Lev=02 Prnt=02 Port=04 Cnt=01 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=e004 Rev=00.02 S: Manufacturer=Atheros Communications S: Product=Bluetooth USB Host Controller S: SerialNumber=Alaska Day 2006 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb BugLink: https://bugs.launchpad.net/bugs/922715 Signed-off-by: AceLan Kao Signed-off-by: Marcel Holtmann --- drivers/bluetooth/ath3k.c | 2 ++ drivers/bluetooth/btusb.c | 1 + 2 files changed, 3 insertions(+) diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index 639a1616402f..57fd867553d7 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -76,6 +76,7 @@ static struct usb_device_id ath3k_table[] = { { USB_DEVICE(0x13d3, 0x3375) }, { USB_DEVICE(0x04CA, 0x3005) }, { USB_DEVICE(0x13d3, 0x3362) }, + { USB_DEVICE(0x0CF3, 0xE004) }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xE02C) }, @@ -96,6 +97,7 @@ static struct usb_device_id ath3k_blist_tbl[] = { { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 }, { } /* Terminating entry */ }; diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index a497544a87e8..93cc828298c4 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -135,6 +135,7 @@ static struct usb_device_id blacklist_table[] = { { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x04ca, 0x3005), .driver_info = BTUSB_ATH3012 }, { USB_DEVICE(0x13d3, 0x3362), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 }, /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE }, From 15b120d67019d691e4389372967332d74a80522a Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 18 Apr 2012 13:59:30 +0300 Subject: [PATCH 054/365] usb: gadget: dummy: do not call pullup() on udc_stop() pullup() is already called properly by udc-core.c and there's no need to call it from udc_stop(), in fact that will cause issues. Cc: stable@vger.kernel.org Reviewed-by: Alexander Shishkin Acked-by: Alan Stern Signed-off-by: Felipe Balbi --- drivers/usb/gadget/dummy_hcd.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index a6dfd2164166..170cbe89d9f8 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -927,7 +927,6 @@ static int dummy_udc_stop(struct usb_gadget *g, dum->driver = NULL; - dummy_pullup(&dum->gadget, 0); return 0; } From a720b2dd2470a52345df11dca8d6c1466599f812 Mon Sep 17 00:00:00 2001 From: "Srivatsa S. Bhat" Date: Thu, 19 Apr 2012 12:35:08 +0200 Subject: [PATCH 055/365] x86, intel_cacheinfo: Fix error return code in amd_set_l3_disable_slot() If the L3 disable slot is already in use, return -EEXIST instead of -EINVAL. The caller, store_cache_disable(), checks this return value to print an appropriate warning. Also, we want to signal with -EEXIST that the current index we're disabling has actually been already disabled on the node: $ echo 12 > /sys/devices/system/cpu/cpu3/cache/index3/cache_disable_0 $ echo 12 > /sys/devices/system/cpu/cpu3/cache/index3/cache_disable_0 -bash: echo: write error: File exists $ echo 12 > /sys/devices/system/cpu/cpu3/cache/index3/cache_disable_1 -bash: echo: write error: File exists $ echo 12 > /sys/devices/system/cpu/cpu5/cache/index3/cache_disable_1 -bash: echo: write error: File exists The old code would say -bash: echo: write error: Invalid argument for disable slot 1 when playing the example above with no output in dmesg, which is clearly misleading. Reported-by: Dan Carpenter Signed-off-by: Srivatsa S. Bhat Link: http://lkml.kernel.org/r/20120419070053.GB16645@elgon.mountain [Boris: add testing for the other index too] Signed-off-by: Borislav Petkov --- arch/x86/kernel/cpu/intel_cacheinfo.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c index 73d08ed98a64..b8f3653dddbc 100644 --- a/arch/x86/kernel/cpu/intel_cacheinfo.c +++ b/arch/x86/kernel/cpu/intel_cacheinfo.c @@ -433,14 +433,14 @@ int amd_set_l3_disable_slot(struct amd_northbridge *nb, int cpu, unsigned slot, /* check if @slot is already used or the index is already disabled */ ret = amd_get_l3_disable_slot(nb, slot); if (ret >= 0) - return -EINVAL; + return -EEXIST; if (index > nb->l3_cache.indices) return -EINVAL; /* check whether the other slot has disabled the same index already */ if (index == amd_get_l3_disable_slot(nb, !slot)) - return -EINVAL; + return -EEXIST; amd_l3_disable_index(nb, cpu, slot, index); @@ -468,8 +468,8 @@ static ssize_t store_cache_disable(struct _cpuid4_info *this_leaf, err = amd_set_l3_disable_slot(this_leaf->base.nb, cpu, slot, val); if (err) { if (err == -EEXIST) - printk(KERN_WARNING "L3 disable slot %d in use!\n", - slot); + pr_warning("L3 slot %d in use/index already disabled!\n", + slot); return err; } return count; From 05ffe24f5290dc095f98fbaf84afe51ef404ccc5 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 18 Apr 2012 12:20:10 -0400 Subject: [PATCH 056/365] NFSv4: Ensure that the LOCK code sets exception->inode All callers of nfs4_handle_exception() that need to handle NFS4ERR_OPENMODE correctly should set exception->inode Signed-off-by: Trond Myklebust Cc: stable@vger.kernel.org --- fs/nfs/nfs4proc.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index f82bde005a82..3c787d02131b 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -4558,7 +4558,9 @@ static int _nfs4_do_setlk(struct nfs4_state *state, int cmd, struct file_lock *f static int nfs4_lock_reclaim(struct nfs4_state *state, struct file_lock *request) { struct nfs_server *server = NFS_SERVER(state->inode); - struct nfs4_exception exception = { }; + struct nfs4_exception exception = { + .inode = state->inode, + }; int err; do { @@ -4576,7 +4578,9 @@ static int nfs4_lock_reclaim(struct nfs4_state *state, struct file_lock *request static int nfs4_lock_expired(struct nfs4_state *state, struct file_lock *request) { struct nfs_server *server = NFS_SERVER(state->inode); - struct nfs4_exception exception = { }; + struct nfs4_exception exception = { + .inode = state->inode, + }; int err; err = nfs4_set_lock_state(state, request); @@ -4676,6 +4680,7 @@ static int nfs4_proc_setlk(struct nfs4_state *state, int cmd, struct file_lock * { struct nfs4_exception exception = { .state = state, + .inode = state->inode, }; int err; From 55725513b5ef9d462aa3e18527658a0362aaae83 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 18 Apr 2012 12:48:35 -0400 Subject: [PATCH 057/365] NFSv4: Ensure that we check lock exclusive/shared type against open modes Since we may be simulating flock() locks using NFS byte range locks, we can't rely on the VFS having checked the file open mode for us. Signed-off-by: Trond Myklebust Cc: stable@vger.kernel.org --- fs/nfs/nfs4proc.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 3c787d02131b..ba837d977a1a 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -4726,6 +4726,20 @@ nfs4_proc_lock(struct file *filp, int cmd, struct file_lock *request) if (state == NULL) return -ENOLCK; + /* + * Don't rely on the VFS having checked the file open mode, + * since it won't do this for flock() locks. + */ + switch (request->fl_type & (F_RDLCK|F_WRLCK|F_UNLCK)) { + case F_RDLCK: + if (!(filp->f_mode & FMODE_READ)) + return -EBADF; + break; + case F_WRLCK: + if (!(filp->f_mode & FMODE_WRITE)) + return -EBADF; + } + do { status = nfs4_proc_setlk(state, cmd, request); if ((status != -EAGAIN) || IS_SETLK(cmd)) From 451146be933e26e21277852b5e40c6a52266ef96 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 18 Apr 2012 16:29:11 -0400 Subject: [PATCH 058/365] NFSv4: Fix open(O_TRUNC) and ftruncate() error handling If the file wasn't opened for writing, then truncate and ftruncate need to report the appropriate errors. Reported-by: Miklos Szeredi Signed-off-by: Trond Myklebust Cc: stable@vger.kernel.org --- fs/nfs/dir.c | 4 ++-- fs/nfs/nfs4proc.c | 15 ++++++++++++--- 2 files changed, 14 insertions(+), 5 deletions(-) diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c index 4aaf0316d76a..8789210c6905 100644 --- a/fs/nfs/dir.c +++ b/fs/nfs/dir.c @@ -1429,7 +1429,7 @@ static struct dentry *nfs_atomic_lookup(struct inode *dir, struct dentry *dentry } open_flags = nd->intent.open.flags; - attr.ia_valid = 0; + attr.ia_valid = ATTR_OPEN; ctx = create_nfs_open_context(dentry, open_flags); res = ERR_CAST(ctx); @@ -1536,7 +1536,7 @@ static int nfs_open_revalidate(struct dentry *dentry, struct nameidata *nd) if (IS_ERR(ctx)) goto out; - attr.ia_valid = 0; + attr.ia_valid = ATTR_OPEN; if (openflags & O_TRUNC) { attr.ia_valid |= ATTR_SIZE; attr.ia_size = 0; diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index ba837d977a1a..f875cf305237 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -1954,10 +1954,19 @@ static int nfs4_do_setattr(struct inode *inode, struct rpc_cred *cred, }; int err; do { - err = nfs4_handle_exception(server, - _nfs4_do_setattr(inode, cred, fattr, sattr, state), - &exception); + err = _nfs4_do_setattr(inode, cred, fattr, sattr, state); + switch (err) { + case -NFS4ERR_OPENMODE: + if (state && !(state->state & FMODE_WRITE)) { + err = -EBADF; + if (sattr->ia_valid & ATTR_OPEN) + err = -EACCES; + goto out; + } + } + err = nfs4_handle_exception(server, err, &exception); } while (exception.retry); +out: return err; } From b9a6a23566960d0dd3f51e2e68b472cd61911078 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 18 Apr 2012 17:31:58 +0200 Subject: [PATCH 059/365] tick: Ensure that the broadcast device is initialized Santosh found another trap when we avoid to initialize the broadcast device in the switch_to_oneshot code. The broadcast device might be still in SHUTDOWN state when we actually need to use it. That obviously breaks, as set_next_event() is called on a shutdown device. This did not break on x86, but Suresh analyzed it: From the review, most likely on Sven's system we are force enabling the hpet using the pci quirk's method very late. And in this case, hpet_clockevent (which will be global_clock_event) handler can be null, specifically as this platform might not be using deeper c-states and using the reliable APIC timer. Prior to commit 'fa4da365bc7772c', that handler will be set to 'tick_handle_oneshot_broadcast' when we switch the broadcast timer to oneshot mode, even though we don't use it. Post commit 'fa4da365bc7772c', we stopped switching the broadcast mode to oneshot as this is not really needed and his platform's global_clock_event's handler will remain null. While on my SNB laptop, same is set to 'clockevents_handle_noop' because hpet gets enabled very early. (noop handler on my platform set when the early enabled hpet timer gets replaced by the lapic timer). But the commit 'fa4da365bc7772c' tracked the broadcast timer mode in the SW as oneshot, even though it didn't touch the HW timer. During resume however, tick_resume_broadcast() saw the SW broadcast mode as oneshot and actually programmed the broadcast device also into oneshot mode. So this triggered the null pointer de-reference after the hpet wraps around and depending on what the hpet counter is set to. On the normal platforms where hpet gets enabled early we should be seeing a spurious interrupt (in my SNB laptop I see one spurious interrupt after around 5 minutes ;) which is 32-bit hpet counter wraparound time), but that's a separate issue. Enforce the mode setting when trying to set an event. Reported-and-tested-by: Santosh Shilimkar Signed-off-by: Thomas Gleixner Acked-by: Suresh Siddha Cc: torvalds@linux-foundation.org Cc: svenjoac@gmx.de Cc: rjw@sisk.pl Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1204181723350.2542@ionos --- kernel/time/tick-broadcast.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c index 119aca5c6845..029531f3818c 100644 --- a/kernel/time/tick-broadcast.c +++ b/kernel/time/tick-broadcast.c @@ -373,6 +373,9 @@ static int tick_broadcast_set_event(ktime_t expires, int force) { struct clock_event_device *bc = tick_broadcast_device.evtdev; + if (bc->mode != CLOCK_EVT_MODE_ONESHOT) + clockevents_set_mode(bc, CLOCK_EVT_MODE_ONESHOT); + return clockevents_program_event(bc, expires, force); } From a6371f80230eaaafd7eef7efeedaa9509bdc982d Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Wed, 18 Apr 2012 19:27:39 -0700 Subject: [PATCH 060/365] tick: Fix the spurious broadcast timer ticks after resume During resume, tick_resume_broadcast() programs the broadcast timer in oneshot mode unconditionally. On the platforms where broadcast timer is not really required, this will generate spurious broadcast timer ticks upon resume. For example, on the always running apic timer platforms with HPET, I see spurious hpet tick once every ~5minutes (which is the 32-bit hpet counter wraparound time). Similar to boot time, during resume make the oneshot mode setting of the broadcast clock event device conditional on the state of active broadcast users. Signed-off-by: Suresh Siddha Tested-by: Santosh Shilimkar Tested-by: svenjoac@gmx.de Cc: torvalds@linux-foundation.org Cc: rjw@sisk.pl Link: http://lkml.kernel.org/r/1334802459.28674.209.camel@sbsiddha-desk.sc.intel.com Signed-off-by: Thomas Gleixner --- kernel/time/tick-broadcast.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c index 029531f3818c..f113755695e2 100644 --- a/kernel/time/tick-broadcast.c +++ b/kernel/time/tick-broadcast.c @@ -346,7 +346,8 @@ int tick_resume_broadcast(void) tick_get_broadcast_mask()); break; case TICKDEV_MODE_ONESHOT: - broadcast = tick_resume_broadcast_oneshot(bc); + if (!cpumask_empty(tick_get_broadcast_mask())) + broadcast = tick_resume_broadcast_oneshot(bc); break; } } From db4c75cbebd7e5910cd3bcb6790272fcc3042857 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Thu, 19 Apr 2012 10:31:47 -0400 Subject: [PATCH 061/365] tracing: Fix stacktrace of latency tracers (irqsoff and friends) While debugging a latency with someone on IRC (mirage335) on #linux-rt (OFTC), we discovered that the stacktrace output of the latency tracers (preemptirqsoff) was empty. This bug was caused by the creation of the dynamic length stack trace again (like commit 12b5da3 "tracing: Fix ent_size in trace output" was). This bug is caused by the latency tracers requiring the next event to determine the time between the current event and the next. But by grabbing the next event, the iter->ent_size is set to the next event instead of the current one. As the stacktrace event is the last event, this makes the ent_size zero and causes nothing to be printed for the stack trace. The dynamic stacktrace uses the ent_size to determine how much of the stack can be printed. The ent_size of zero means no stack. The simple fix is to save the iter->ent_size before finding the next event. Note, mirage335 asked to remain anonymous from LKML and git, so I will not add the Reported-by and Tested-by tags, even though he did report the issue and tested the fix. Cc: stable@vger.kernel.org # 3.1+ Signed-off-by: Steven Rostedt --- kernel/trace/trace_output.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/kernel/trace/trace_output.c b/kernel/trace/trace_output.c index 859fae6b1825..df611a0e76c5 100644 --- a/kernel/trace/trace_output.c +++ b/kernel/trace/trace_output.c @@ -652,6 +652,8 @@ int trace_print_lat_context(struct trace_iterator *iter) { u64 next_ts; int ret; + /* trace_find_next_entry will reset ent_size */ + int ent_size = iter->ent_size; struct trace_seq *s = &iter->seq; struct trace_entry *entry = iter->ent, *next_entry = trace_find_next_entry(iter, NULL, @@ -660,6 +662,9 @@ int trace_print_lat_context(struct trace_iterator *iter) unsigned long abs_usecs = ns2usecs(iter->ts - iter->tr->time_start); unsigned long rel_usecs; + /* Restore the original ent_size */ + iter->ent_size = ent_size; + if (!next_entry) next_ts = iter->ts; rel_usecs = ns2usecs(next_ts - iter->ts); From 3af9d8f227a31e25b3110ef175d105798fc147a6 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Fri, 13 Apr 2012 17:16:59 -0400 Subject: [PATCH 062/365] cifs: fix offset handling in cifs_iovec_write In the recent update of the cifs_iovec_write code to use async writes, the handling of the file position was broken. That patch added a local "offset" variable to handle the offset, and then only updated the original "*poffset" before exiting. Unfortunately, it copied off the original offset from the beginning, instead of doing so after generic_write_checks had been called. Fix this by moving the initialization of "offset" after that in the function. Signed-off-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/file.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/cifs/file.c b/fs/cifs/file.c index fae765dac934..81725e9286e9 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -2178,7 +2178,7 @@ cifs_iovec_write(struct file *file, const struct iovec *iov, unsigned long nr_pages, i; size_t copied, len, cur_len; ssize_t total_written = 0; - loff_t offset = *poffset; + loff_t offset; struct iov_iter it; struct cifsFileInfo *open_file; struct cifs_tcon *tcon; @@ -2200,6 +2200,7 @@ cifs_iovec_write(struct file *file, const struct iovec *iov, cifs_sb = CIFS_SB(file->f_path.dentry->d_sb); open_file = file->private_data; tcon = tlink_tcon(open_file->tlink); + offset = *poffset; if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_RWPIDFORWARD) pid = open_file->pid; From a102962ffd45fe8bac68ea6d9f72d3ed19dc44e1 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sat, 31 Mar 2012 17:44:53 +0100 Subject: [PATCH 063/365] ARM: ux300: Fix unimplementable regulation constraints It doesn't make sense to grant permission to change the status of a regulator that is also set as always on and similarly it doesn't make sense to allow a driver to change the voltage of a regulator which can only be set to a single voltage. Signed-off-by: Mark Brown Signed-off-by: Linus Walleij --- arch/arm/mach-u300/i2c.c | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) diff --git a/arch/arm/mach-u300/i2c.c b/arch/arm/mach-u300/i2c.c index a38f80238ea9..cb04bd6ab3e7 100644 --- a/arch/arm/mach-u300/i2c.c +++ b/arch/arm/mach-u300/i2c.c @@ -146,9 +146,6 @@ static struct ab3100_platform_data ab3100_plf_data = { .min_uV = 1800000, .max_uV = 1800000, .valid_modes_mask = REGULATOR_MODE_NORMAL, - .valid_ops_mask = - REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, .always_on = 1, .boot_on = 1, }, @@ -160,9 +157,6 @@ static struct ab3100_platform_data ab3100_plf_data = { .min_uV = 2500000, .max_uV = 2500000, .valid_modes_mask = REGULATOR_MODE_NORMAL, - .valid_ops_mask = - REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, .always_on = 1, .boot_on = 1, }, @@ -230,8 +224,7 @@ static struct ab3100_platform_data ab3100_plf_data = { .max_uV = 1800000, .valid_modes_mask = REGULATOR_MODE_NORMAL, .valid_ops_mask = - REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_STATUS, + REGULATOR_CHANGE_VOLTAGE, .always_on = 1, .boot_on = 1, }, From 1344500e2d79d09db81f748984697cbdd6b02279 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 18 Apr 2012 15:29:58 +0200 Subject: [PATCH 064/365] ARM: u300: bump all IRQ numbers by one Since the VIC was converted to use generic IRQ domains IRQ 0 is silently ignored. This IRQ is used on the U300 so we're missing it now. Bump all IRQ numbers by one since they are now decoupled from the hardware IRQ numbers. Cc: Grant Likely Cc: Rob Herring Signed-off-by: Linus Walleij --- arch/arm/mach-u300/core.c | 6 +- arch/arm/mach-u300/include/mach/irqs.h | 150 ++++++++++++------------- 2 files changed, 79 insertions(+), 77 deletions(-) diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c index 1621ad07d284..33339745d432 100644 --- a/arch/arm/mach-u300/core.c +++ b/arch/arm/mach-u300/core.c @@ -1667,8 +1667,10 @@ void __init u300_init_irq(void) for (i = 0; i < U300_VIC_IRQS_END; i++) set_bit(i, (unsigned long *) &mask[0]); - vic_init((void __iomem *) U300_INTCON0_VBASE, 0, mask[0], mask[0]); - vic_init((void __iomem *) U300_INTCON1_VBASE, 32, mask[1], mask[1]); + vic_init((void __iomem *) U300_INTCON0_VBASE, IRQ_U300_INTCON0_START, + mask[0], mask[0]); + vic_init((void __iomem *) U300_INTCON1_VBASE, IRQ_U300_INTCON1_START, + mask[1], mask[1]); } diff --git a/arch/arm/mach-u300/include/mach/irqs.h b/arch/arm/mach-u300/include/mach/irqs.h index ee78a26707eb..ec09c1e07b1a 100644 --- a/arch/arm/mach-u300/include/mach/irqs.h +++ b/arch/arm/mach-u300/include/mach/irqs.h @@ -12,101 +12,101 @@ #ifndef __MACH_IRQS_H #define __MACH_IRQS_H -#define IRQ_U300_INTCON0_START 0 -#define IRQ_U300_INTCON1_START 32 +#define IRQ_U300_INTCON0_START 1 +#define IRQ_U300_INTCON1_START 33 /* These are on INTCON0 - 30 lines */ -#define IRQ_U300_IRQ0_EXT 0 -#define IRQ_U300_IRQ1_EXT 1 -#define IRQ_U300_DMA 2 -#define IRQ_U300_VIDEO_ENC_0 3 -#define IRQ_U300_VIDEO_ENC_1 4 -#define IRQ_U300_AAIF_RX 5 -#define IRQ_U300_AAIF_TX 6 -#define IRQ_U300_AAIF_VGPIO 7 -#define IRQ_U300_AAIF_WAKEUP 8 -#define IRQ_U300_PCM_I2S0_FRAME 9 -#define IRQ_U300_PCM_I2S0_FIFO 10 -#define IRQ_U300_PCM_I2S1_FRAME 11 -#define IRQ_U300_PCM_I2S1_FIFO 12 -#define IRQ_U300_XGAM_GAMCON 13 -#define IRQ_U300_XGAM_CDI 14 -#define IRQ_U300_XGAM_CDICON 15 +#define IRQ_U300_IRQ0_EXT 1 +#define IRQ_U300_IRQ1_EXT 2 +#define IRQ_U300_DMA 3 +#define IRQ_U300_VIDEO_ENC_0 4 +#define IRQ_U300_VIDEO_ENC_1 5 +#define IRQ_U300_AAIF_RX 6 +#define IRQ_U300_AAIF_TX 7 +#define IRQ_U300_AAIF_VGPIO 8 +#define IRQ_U300_AAIF_WAKEUP 9 +#define IRQ_U300_PCM_I2S0_FRAME 10 +#define IRQ_U300_PCM_I2S0_FIFO 11 +#define IRQ_U300_PCM_I2S1_FRAME 12 +#define IRQ_U300_PCM_I2S1_FIFO 13 +#define IRQ_U300_XGAM_GAMCON 14 +#define IRQ_U300_XGAM_CDI 15 +#define IRQ_U300_XGAM_CDICON 16 #if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) /* MMIACC not used on the DB3210 or DB3350 chips */ -#define IRQ_U300_XGAM_MMIACC 16 +#define IRQ_U300_XGAM_MMIACC 17 #endif -#define IRQ_U300_XGAM_PDI 17 -#define IRQ_U300_XGAM_PDICON 18 -#define IRQ_U300_XGAM_GAMEACC 19 -#define IRQ_U300_XGAM_MCIDCT 20 -#define IRQ_U300_APEX 21 -#define IRQ_U300_UART0 22 -#define IRQ_U300_SPI 23 -#define IRQ_U300_TIMER_APP_OS 24 -#define IRQ_U300_TIMER_APP_DD 25 -#define IRQ_U300_TIMER_APP_GP1 26 -#define IRQ_U300_TIMER_APP_GP2 27 -#define IRQ_U300_TIMER_OS 28 -#define IRQ_U300_TIMER_MS 29 -#define IRQ_U300_KEYPAD_KEYBF 30 -#define IRQ_U300_KEYPAD_KEYBR 31 +#define IRQ_U300_XGAM_PDI 18 +#define IRQ_U300_XGAM_PDICON 19 +#define IRQ_U300_XGAM_GAMEACC 20 +#define IRQ_U300_XGAM_MCIDCT 21 +#define IRQ_U300_APEX 22 +#define IRQ_U300_UART0 23 +#define IRQ_U300_SPI 24 +#define IRQ_U300_TIMER_APP_OS 25 +#define IRQ_U300_TIMER_APP_DD 26 +#define IRQ_U300_TIMER_APP_GP1 27 +#define IRQ_U300_TIMER_APP_GP2 28 +#define IRQ_U300_TIMER_OS 29 +#define IRQ_U300_TIMER_MS 30 +#define IRQ_U300_KEYPAD_KEYBF 31 +#define IRQ_U300_KEYPAD_KEYBR 32 /* These are on INTCON1 - 32 lines */ -#define IRQ_U300_GPIO_PORT0 32 -#define IRQ_U300_GPIO_PORT1 33 -#define IRQ_U300_GPIO_PORT2 34 +#define IRQ_U300_GPIO_PORT0 33 +#define IRQ_U300_GPIO_PORT1 34 +#define IRQ_U300_GPIO_PORT2 35 #if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) || \ defined(CONFIG_MACH_U300_BS335) /* These are for DB3150, DB3200 and DB3350 */ -#define IRQ_U300_WDOG 35 -#define IRQ_U300_EVHIST 36 -#define IRQ_U300_MSPRO 37 -#define IRQ_U300_MMCSD_MCIINTR0 38 -#define IRQ_U300_MMCSD_MCIINTR1 39 -#define IRQ_U300_I2C0 40 -#define IRQ_U300_I2C1 41 -#define IRQ_U300_RTC 42 -#define IRQ_U300_NFIF 43 -#define IRQ_U300_NFIF2 44 +#define IRQ_U300_WDOG 36 +#define IRQ_U300_EVHIST 37 +#define IRQ_U300_MSPRO 38 +#define IRQ_U300_MMCSD_MCIINTR0 39 +#define IRQ_U300_MMCSD_MCIINTR1 40 +#define IRQ_U300_I2C0 41 +#define IRQ_U300_I2C1 42 +#define IRQ_U300_RTC 43 +#define IRQ_U300_NFIF 44 +#define IRQ_U300_NFIF2 45 #endif /* DB3150 and DB3200 have only 45 IRQs */ #if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) -#define U300_VIC_IRQS_END 45 +#define U300_VIC_IRQS_END 46 #endif /* The DB3350-specific interrupt lines */ #ifdef CONFIG_MACH_U300_BS335 -#define IRQ_U300_ISP_F0 45 -#define IRQ_U300_ISP_F1 46 -#define IRQ_U300_ISP_F2 47 -#define IRQ_U300_ISP_F3 48 -#define IRQ_U300_ISP_F4 49 -#define IRQ_U300_GPIO_PORT3 50 -#define IRQ_U300_SYSCON_PLL_LOCK 51 -#define IRQ_U300_UART1 52 -#define IRQ_U300_GPIO_PORT4 53 -#define IRQ_U300_GPIO_PORT5 54 -#define IRQ_U300_GPIO_PORT6 55 -#define U300_VIC_IRQS_END 56 +#define IRQ_U300_ISP_F0 46 +#define IRQ_U300_ISP_F1 47 +#define IRQ_U300_ISP_F2 48 +#define IRQ_U300_ISP_F3 49 +#define IRQ_U300_ISP_F4 50 +#define IRQ_U300_GPIO_PORT3 51 +#define IRQ_U300_SYSCON_PLL_LOCK 52 +#define IRQ_U300_UART1 53 +#define IRQ_U300_GPIO_PORT4 54 +#define IRQ_U300_GPIO_PORT5 55 +#define IRQ_U300_GPIO_PORT6 56 +#define U300_VIC_IRQS_END 57 #endif /* The DB3210-specific interrupt lines */ #ifdef CONFIG_MACH_U300_BS365 -#define IRQ_U300_GPIO_PORT3 35 -#define IRQ_U300_GPIO_PORT4 36 -#define IRQ_U300_WDOG 37 -#define IRQ_U300_EVHIST 38 -#define IRQ_U300_MSPRO 39 -#define IRQ_U300_MMCSD_MCIINTR0 40 -#define IRQ_U300_MMCSD_MCIINTR1 41 -#define IRQ_U300_I2C0 42 -#define IRQ_U300_I2C1 43 -#define IRQ_U300_RTC 44 -#define IRQ_U300_NFIF 45 -#define IRQ_U300_NFIF2 46 -#define IRQ_U300_SYSCON_PLL_LOCK 47 -#define U300_VIC_IRQS_END 48 +#define IRQ_U300_GPIO_PORT3 36 +#define IRQ_U300_GPIO_PORT4 37 +#define IRQ_U300_WDOG 38 +#define IRQ_U300_EVHIST 39 +#define IRQ_U300_MSPRO 40 +#define IRQ_U300_MMCSD_MCIINTR0 41 +#define IRQ_U300_MMCSD_MCIINTR1 42 +#define IRQ_U300_I2C0 43 +#define IRQ_U300_I2C1 44 +#define IRQ_U300_RTC 45 +#define IRQ_U300_NFIF 46 +#define IRQ_U300_NFIF2 47 +#define IRQ_U300_SYSCON_PLL_LOCK 48 +#define U300_VIC_IRQS_END 49 #endif /* Maximum 8*7 GPIO lines */ @@ -117,6 +117,6 @@ #define IRQ_U300_GPIO_END (U300_VIC_IRQS_END) #endif -#define NR_IRQS (IRQ_U300_GPIO_END) +#define NR_IRQS (IRQ_U300_GPIO_END - IRQ_U300_INTCON0_START) #endif From 5ac57550f279c3d991ef0b398681bcaca18169f7 Mon Sep 17 00:00:00 2001 From: David Henningsson Date: Fri, 20 Apr 2012 10:01:46 +0200 Subject: [PATCH 065/365] ALSA: HDA: Add external mic quirk for Asus Zenbook UX31E According to the reporter, external mic starts to work if the laptop-dmic model is used. According to BIOS pin config, all pins are consistent with the alc269vb_laptop_dmic fixup, except for the external mic, which is not present. Cc: stable@kernel.org BugLink: https://bugs.launchpad.net/bugs/950490 Signed-off-by: David Henningsson Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index e65e35433055..818f90bc7d57 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6109,6 +6109,7 @@ static const struct alc_fixup alc269_fixups[] = { static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x103c, 0x1586, "HP", ALC269_FIXUP_MIC2_MUTE_LED), + SND_PCI_QUIRK(0x1043, 0x1427, "Asus Zenbook UX31E", ALC269VB_FIXUP_DMIC), SND_PCI_QUIRK(0x1043, 0x1a13, "Asus G73Jw", ALC269_FIXUP_ASUS_G73JW), SND_PCI_QUIRK(0x1043, 0x16e3, "ASUS UX50", ALC269_FIXUP_STEREO_DMIC), SND_PCI_QUIRK(0x1043, 0x831a, "ASUS P901", ALC269_FIXUP_STEREO_DMIC), From 60f2951e3ad9b833bc12e2ea7652be2611771792 Mon Sep 17 00:00:00 2001 From: Vinod Koul Date: Fri, 20 Apr 2012 15:28:07 +0530 Subject: [PATCH 066/365] dmaengine: imx-dma: dont complete descriptor for cyclic dma the cookie updates completed the cyclic dma descriptor wrongly. This caused the BUG_ON to be hit as submit is called for completed descriptor Fix this by not marking the cyclic descriptor as complete Tested-by: Javier Martin Signed-off-by: Vinod Koul --- drivers/dma/imx-dma.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/dma/imx-dma.c b/drivers/dma/imx-dma.c index a45b5d2a5987..bb787d8e1529 100644 --- a/drivers/dma/imx-dma.c +++ b/drivers/dma/imx-dma.c @@ -571,11 +571,14 @@ static void imxdma_tasklet(unsigned long data) if (desc->desc.callback) desc->desc.callback(desc->desc.callback_param); - dma_cookie_complete(&desc->desc); - - /* If we are dealing with a cyclic descriptor keep it on ld_active */ + /* If we are dealing with a cyclic descriptor keep it on ld_active + * and dont mark the descripor as complete. + * Only in non-cyclic cases it would be marked as complete + */ if (imxdma_chan_is_doing_cyclic(imxdmac)) goto out; + else + dma_cookie_complete(&desc->desc); /* Free 2D slot if it was an interleaved transfer */ if (imxdmac->enabled_2d) { From d04525ed0323709711277563a2c76e446a017423 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Wed, 11 Apr 2012 13:29:31 +0800 Subject: [PATCH 067/365] dma: mxs-dma: enable channel in device_issue_pending call Enable channel in device_issue_pending call, so that the order between cookie assignment and channel enabling can be ensured naturally. It fixes the mxs gpmi-nand breakage which is caused by the incorrect order of cookie assigning and channel enabling. Suggested-by: Russell King Signed-off-by: Shawn Guo Tested-by: Huang Shijie Tested-by Signed-off-by: Vinod Koul --- drivers/dma/mxs-dma.c | 10 +++------- drivers/mmc/host/mxs-mmc.c | 3 +++ drivers/mtd/nand/gpmi-nand/gpmi-nand.c | 1 + 3 files changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/dma/mxs-dma.c b/drivers/dma/mxs-dma.c index c81ef7e10e08..655d4ce6ed0d 100644 --- a/drivers/dma/mxs-dma.c +++ b/drivers/dma/mxs-dma.c @@ -201,10 +201,6 @@ static struct mxs_dma_chan *to_mxs_dma_chan(struct dma_chan *chan) static dma_cookie_t mxs_dma_tx_submit(struct dma_async_tx_descriptor *tx) { - struct mxs_dma_chan *mxs_chan = to_mxs_dma_chan(tx->chan); - - mxs_dma_enable_chan(mxs_chan); - return dma_cookie_assign(tx); } @@ -558,9 +554,9 @@ static enum dma_status mxs_dma_tx_status(struct dma_chan *chan, static void mxs_dma_issue_pending(struct dma_chan *chan) { - /* - * Nothing to do. We only have a single descriptor. - */ + struct mxs_dma_chan *mxs_chan = to_mxs_dma_chan(chan); + + mxs_dma_enable_chan(mxs_chan); } static int __init mxs_dma_init(struct mxs_dma_engine *mxs_dma) diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c index b0f2ef988188..e3f5af96ab87 100644 --- a/drivers/mmc/host/mxs-mmc.c +++ b/drivers/mmc/host/mxs-mmc.c @@ -363,6 +363,7 @@ static void mxs_mmc_bc(struct mxs_mmc_host *host) goto out; dmaengine_submit(desc); + dma_async_issue_pending(host->dmach); return; out: @@ -403,6 +404,7 @@ static void mxs_mmc_ac(struct mxs_mmc_host *host) goto out; dmaengine_submit(desc); + dma_async_issue_pending(host->dmach); return; out: @@ -531,6 +533,7 @@ static void mxs_mmc_adtc(struct mxs_mmc_host *host) goto out; dmaengine_submit(desc); + dma_async_issue_pending(host->dmach); return; out: dev_warn(mmc_dev(host->mmc), diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c index 75b1dde16358..9ec51cec2e14 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c @@ -266,6 +266,7 @@ int start_dma_without_bch_irq(struct gpmi_nand_data *this, desc->callback = dma_irq_callback; desc->callback_param = this; dmaengine_submit(desc); + dma_async_issue_pending(get_dma_chan(this)); /* Wait for the interrupt from the DMA block. */ err = wait_for_completion_timeout(dma_c, msecs_to_jiffies(1000)); From ed8b0d67f33518a16c6b2450fe5ebebf180c2d04 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Mon, 16 Apr 2012 14:46:30 +0200 Subject: [PATCH 068/365] dmaengine: at_hdmac: remove clear-on-read in atc_dostart() This loop on EBCISR register was designed to clear IRQ sources before enabling a DMA channel. This register is clear-on-read so a race condition can appear if another channel is already active and has just finished its transfer. Removing this read on EBCISR is fixing the issue as there is no case where an IRQ could be pending: we already make sure that this register is drained at probe() time and during resume. Signed-off-by: Nicolas Ferre Cc: stable Signed-off-by: Vinod Koul --- drivers/dma/at_hdmac.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c index 7aa58d204892..445fdf811695 100644 --- a/drivers/dma/at_hdmac.c +++ b/drivers/dma/at_hdmac.c @@ -221,10 +221,6 @@ static void atc_dostart(struct at_dma_chan *atchan, struct at_desc *first) vdbg_dump_regs(atchan); - /* clear any pending interrupt */ - while (dma_readl(atdma, EBCISR)) - cpu_relax(); - channel_writel(atchan, SADDR, 0); channel_writel(atchan, DADDR, 0); channel_writel(atchan, CTRLA, 0); From 33ff581eddf744ea91a50d46c2f0961b375a9595 Mon Sep 17 00:00:00 2001 From: Jiri Olsa Date: Wed, 18 Apr 2012 15:46:58 +0200 Subject: [PATCH 069/365] perf symbols: Read plt symbols from proper symtab_type binary When loading symbols from DSO we check multiple paths of DSO binary until we succeed to load symbols ('.symtab' section). Once symbols are read we try to load also plt symbols. During the reading of plt symbols, the dso file is reopened from location given by dso->long_name. This could be wrong in case we want process buildid binaries. The change is to make the plt symbols being read from the DSO path, that normal symbols were read from. Signed-off-by: Jiri Olsa Cc: Corey Ashford Cc: Frederic Weisbecker Cc: Ingo Molnar Cc: Paul Mackerras Cc: Peter Zijlstra Link: http://lkml.kernel.org/r/1334756818-6631-1-git-send-email-jolsa@redhat.com [ committer note: moved dso to be the first parameter of that function ] Signed-off-by: Arnaldo Carvalho de Melo --- tools/perf/util/symbol.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c index c0a028c3ebaf..ab9867b2b433 100644 --- a/tools/perf/util/symbol.c +++ b/tools/perf/util/symbol.c @@ -977,8 +977,9 @@ static Elf_Scn *elf_section_by_name(Elf *elf, GElf_Ehdr *ep, * And always look at the original dso, not at debuginfo packages, that * have the PLT data stripped out (shdr_rel_plt.sh_type == SHT_NOBITS). */ -static int dso__synthesize_plt_symbols(struct dso *dso, struct map *map, - symbol_filter_t filter) +static int +dso__synthesize_plt_symbols(struct dso *dso, char *name, struct map *map, + symbol_filter_t filter) { uint32_t nr_rel_entries, idx; GElf_Sym sym; @@ -993,10 +994,7 @@ static int dso__synthesize_plt_symbols(struct dso *dso, struct map *map, char sympltname[1024]; Elf *elf; int nr = 0, symidx, fd, err = 0; - char name[PATH_MAX]; - snprintf(name, sizeof(name), "%s%s", - symbol_conf.symfs, dso->long_name); fd = open(name, O_RDONLY); if (fd < 0) goto out; @@ -1703,8 +1701,9 @@ restart: continue; if (ret > 0) { - int nr_plt = dso__synthesize_plt_symbols(dso, map, - filter); + int nr_plt; + + nr_plt = dso__synthesize_plt_symbols(dso, name, map, filter); if (nr_plt > 0) ret += nr_plt; break; From 73fb7bc7c57d971b11f2e00536ac2d3e316e0609 Mon Sep 17 00:00:00 2001 From: Fred Isaman Date: Fri, 20 Apr 2012 14:47:34 -0400 Subject: [PATCH 070/365] NFS: put open context on error in nfs_pagein_multi Cc: Signed-off-by: Fred Isaman Signed-off-by: Trond Myklebust --- fs/nfs/read.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nfs/read.c b/fs/nfs/read.c index 9a0e8ef4a409..0a4be28c2ea3 100644 --- a/fs/nfs/read.c +++ b/fs/nfs/read.c @@ -322,7 +322,7 @@ out_bad: while (!list_empty(res)) { data = list_entry(res->next, struct nfs_read_data, list); list_del(&data->list); - nfs_readdata_free(data); + nfs_readdata_release(data); } nfs_readpage_release(req); return -ENOMEM; From 8ccd271f7a3a846ce6f85ead0760d9d12994a611 Mon Sep 17 00:00:00 2001 From: Fred Isaman Date: Fri, 20 Apr 2012 14:47:35 -0400 Subject: [PATCH 071/365] NFS: put open context on error in nfs_flush_multi Cc: Signed-off-by: Fred Isaman Signed-off-by: Trond Myklebust --- fs/nfs/write.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nfs/write.c b/fs/nfs/write.c index 9b8d4d42a8af..c07462320f6b 100644 --- a/fs/nfs/write.c +++ b/fs/nfs/write.c @@ -1019,7 +1019,7 @@ out_bad: while (!list_empty(res)) { data = list_entry(res->next, struct nfs_write_data, list); list_del(&data->list); - nfs_writedata_free(data); + nfs_writedata_release(data); } nfs_redirty_request(req); return -ENOMEM; From 98a2139f4f4d7b5fcc3a54c7fddbe88612abed20 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Sat, 3 Sep 2011 01:09:43 +0200 Subject: [PATCH 072/365] nfs: Enclose hostname in brackets when needed in nfs_do_root_mount When hostname contains colon (e.g. when it is an IPv6 address) it needs to be enclosed in brackets to make parsing of NFS device string possible. Fix nfs_do_root_mount() to enclose hostname properly when needed. NFS code actually does not need this as it does not parse the string passed by nfs_do_root_mount() but the device string is exposed to userspace in /proc/mounts. CC: Josh Boyer CC: Trond Myklebust Signed-off-by: Jan Kara Cc: stable@vger.kernel.org Signed-off-by: Trond Myklebust --- fs/nfs/super.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/fs/nfs/super.c b/fs/nfs/super.c index 37412f706b32..1e6715f0616c 100644 --- a/fs/nfs/super.c +++ b/fs/nfs/super.c @@ -2767,11 +2767,15 @@ static struct vfsmount *nfs_do_root_mount(struct file_system_type *fs_type, char *root_devname; size_t len; - len = strlen(hostname) + 3; + len = strlen(hostname) + 5; root_devname = kmalloc(len, GFP_KERNEL); if (root_devname == NULL) return ERR_PTR(-ENOMEM); - snprintf(root_devname, len, "%s:/", hostname); + /* Does hostname needs to be enclosed in brackets? */ + if (strchr(hostname, ':')) + snprintf(root_devname, len, "[%s]:/", hostname); + else + snprintf(root_devname, len, "%s:/", hostname); root_mnt = vfs_kern_mount(fs_type, flags, root_devname, data); kfree(root_devname); return root_mnt; From 8482c81c770960d7c0dc991a781cbd4afa7ea4cc Mon Sep 17 00:00:00 2001 From: Thomas Abraham Date: Sat, 14 Apr 2012 08:04:46 -0700 Subject: [PATCH 073/365] ARM: EXYNOS: use 'exynos4-sdhci' as device name for sdhci controllers With the addition of platform specific driver data in the sdhci driver for EXYNOS4 and EXYNOS5, the device name of sdhci controllers on EXYNOS4 and EXYNOS5 are changed accordingly. Signed-off-by: Thomas Abraham [kgene.kim@samsung.com: re-worked on top of v3.4-rc2] Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/clock-exynos4.c | 24 +++++++++---------- arch/arm/mach-exynos/clock-exynos5.c | 24 +++++++++---------- arch/arm/mach-exynos/common.c | 10 ++++++++ arch/arm/plat-samsung/include/plat/sdhci.h | 28 ++++++++++++++++++++++ 4 files changed, 62 insertions(+), 24 deletions(-) diff --git a/arch/arm/mach-exynos/clock-exynos4.c b/arch/arm/mach-exynos/clock-exynos4.c index df54c2a92225..6efd1e5919fd 100644 --- a/arch/arm/mach-exynos/clock-exynos4.c +++ b/arch/arm/mach-exynos/clock-exynos4.c @@ -497,25 +497,25 @@ static struct clk exynos4_init_clocks_off[] = { .ctrlbit = (1 << 3), }, { .name = "hsmmc", - .devname = "s3c-sdhci.0", + .devname = "exynos4-sdhci.0", .parent = &exynos4_clk_aclk_133.clk, .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 5), }, { .name = "hsmmc", - .devname = "s3c-sdhci.1", + .devname = "exynos4-sdhci.1", .parent = &exynos4_clk_aclk_133.clk, .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 6), }, { .name = "hsmmc", - .devname = "s3c-sdhci.2", + .devname = "exynos4-sdhci.2", .parent = &exynos4_clk_aclk_133.clk, .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 7), }, { .name = "hsmmc", - .devname = "s3c-sdhci.3", + .devname = "exynos4-sdhci.3", .parent = &exynos4_clk_aclk_133.clk, .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 8), @@ -1202,7 +1202,7 @@ static struct clksrc_clk exynos4_clk_sclk_uart3 = { static struct clksrc_clk exynos4_clk_sclk_mmc0 = { .clk = { .name = "sclk_mmc", - .devname = "s3c-sdhci.0", + .devname = "exynos4-sdhci.0", .parent = &exynos4_clk_dout_mmc0.clk, .enable = exynos4_clksrc_mask_fsys_ctrl, .ctrlbit = (1 << 0), @@ -1213,7 +1213,7 @@ static struct clksrc_clk exynos4_clk_sclk_mmc0 = { static struct clksrc_clk exynos4_clk_sclk_mmc1 = { .clk = { .name = "sclk_mmc", - .devname = "s3c-sdhci.1", + .devname = "exynos4-sdhci.1", .parent = &exynos4_clk_dout_mmc1.clk, .enable = exynos4_clksrc_mask_fsys_ctrl, .ctrlbit = (1 << 4), @@ -1224,7 +1224,7 @@ static struct clksrc_clk exynos4_clk_sclk_mmc1 = { static struct clksrc_clk exynos4_clk_sclk_mmc2 = { .clk = { .name = "sclk_mmc", - .devname = "s3c-sdhci.2", + .devname = "exynos4-sdhci.2", .parent = &exynos4_clk_dout_mmc2.clk, .enable = exynos4_clksrc_mask_fsys_ctrl, .ctrlbit = (1 << 8), @@ -1235,7 +1235,7 @@ static struct clksrc_clk exynos4_clk_sclk_mmc2 = { static struct clksrc_clk exynos4_clk_sclk_mmc3 = { .clk = { .name = "sclk_mmc", - .devname = "s3c-sdhci.3", + .devname = "exynos4-sdhci.3", .parent = &exynos4_clk_dout_mmc3.clk, .enable = exynos4_clksrc_mask_fsys_ctrl, .ctrlbit = (1 << 12), @@ -1340,10 +1340,10 @@ static struct clk_lookup exynos4_clk_lookup[] = { CLKDEV_INIT("exynos4210-uart.1", "clk_uart_baud0", &exynos4_clk_sclk_uart1.clk), CLKDEV_INIT("exynos4210-uart.2", "clk_uart_baud0", &exynos4_clk_sclk_uart2.clk), CLKDEV_INIT("exynos4210-uart.3", "clk_uart_baud0", &exynos4_clk_sclk_uart3.clk), - CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &exynos4_clk_sclk_mmc0.clk), - CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &exynos4_clk_sclk_mmc1.clk), - CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &exynos4_clk_sclk_mmc2.clk), - CLKDEV_INIT("s3c-sdhci.3", "mmc_busclk.2", &exynos4_clk_sclk_mmc3.clk), + CLKDEV_INIT("exynos4-sdhci.0", "mmc_busclk.2", &exynos4_clk_sclk_mmc0.clk), + CLKDEV_INIT("exynos4-sdhci.1", "mmc_busclk.2", &exynos4_clk_sclk_mmc1.clk), + CLKDEV_INIT("exynos4-sdhci.2", "mmc_busclk.2", &exynos4_clk_sclk_mmc2.clk), + CLKDEV_INIT("exynos4-sdhci.3", "mmc_busclk.2", &exynos4_clk_sclk_mmc3.clk), CLKDEV_INIT("exynos4-fb.0", "lcd", &exynos4_clk_fimd0), CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos4_clk_pdma0), CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos4_clk_pdma1), diff --git a/arch/arm/mach-exynos/clock-exynos5.c b/arch/arm/mach-exynos/clock-exynos5.c index d013982d0f8e..5cd7a8b8868c 100644 --- a/arch/arm/mach-exynos/clock-exynos5.c +++ b/arch/arm/mach-exynos/clock-exynos5.c @@ -455,25 +455,25 @@ static struct clk exynos5_init_clocks_off[] = { .ctrlbit = (1 << 20), }, { .name = "hsmmc", - .devname = "s3c-sdhci.0", + .devname = "exynos4-sdhci.0", .parent = &exynos5_clk_aclk_200.clk, .enable = exynos5_clk_ip_fsys_ctrl, .ctrlbit = (1 << 12), }, { .name = "hsmmc", - .devname = "s3c-sdhci.1", + .devname = "exynos4-sdhci.1", .parent = &exynos5_clk_aclk_200.clk, .enable = exynos5_clk_ip_fsys_ctrl, .ctrlbit = (1 << 13), }, { .name = "hsmmc", - .devname = "s3c-sdhci.2", + .devname = "exynos4-sdhci.2", .parent = &exynos5_clk_aclk_200.clk, .enable = exynos5_clk_ip_fsys_ctrl, .ctrlbit = (1 << 14), }, { .name = "hsmmc", - .devname = "s3c-sdhci.3", + .devname = "exynos4-sdhci.3", .parent = &exynos5_clk_aclk_200.clk, .enable = exynos5_clk_ip_fsys_ctrl, .ctrlbit = (1 << 15), @@ -813,7 +813,7 @@ static struct clksrc_clk exynos5_clk_sclk_uart3 = { static struct clksrc_clk exynos5_clk_sclk_mmc0 = { .clk = { .name = "sclk_mmc", - .devname = "s3c-sdhci.0", + .devname = "exynos4-sdhci.0", .parent = &exynos5_clk_dout_mmc0.clk, .enable = exynos5_clksrc_mask_fsys_ctrl, .ctrlbit = (1 << 0), @@ -824,7 +824,7 @@ static struct clksrc_clk exynos5_clk_sclk_mmc0 = { static struct clksrc_clk exynos5_clk_sclk_mmc1 = { .clk = { .name = "sclk_mmc", - .devname = "s3c-sdhci.1", + .devname = "exynos4-sdhci.1", .parent = &exynos5_clk_dout_mmc1.clk, .enable = exynos5_clksrc_mask_fsys_ctrl, .ctrlbit = (1 << 4), @@ -835,7 +835,7 @@ static struct clksrc_clk exynos5_clk_sclk_mmc1 = { static struct clksrc_clk exynos5_clk_sclk_mmc2 = { .clk = { .name = "sclk_mmc", - .devname = "s3c-sdhci.2", + .devname = "exynos4-sdhci.2", .parent = &exynos5_clk_dout_mmc2.clk, .enable = exynos5_clksrc_mask_fsys_ctrl, .ctrlbit = (1 << 8), @@ -846,7 +846,7 @@ static struct clksrc_clk exynos5_clk_sclk_mmc2 = { static struct clksrc_clk exynos5_clk_sclk_mmc3 = { .clk = { .name = "sclk_mmc", - .devname = "s3c-sdhci.3", + .devname = "exynos4-sdhci.3", .parent = &exynos5_clk_dout_mmc3.clk, .enable = exynos5_clksrc_mask_fsys_ctrl, .ctrlbit = (1 << 12), @@ -990,10 +990,10 @@ static struct clk_lookup exynos5_clk_lookup[] = { CLKDEV_INIT("exynos4210-uart.1", "clk_uart_baud0", &exynos5_clk_sclk_uart1.clk), CLKDEV_INIT("exynos4210-uart.2", "clk_uart_baud0", &exynos5_clk_sclk_uart2.clk), CLKDEV_INIT("exynos4210-uart.3", "clk_uart_baud0", &exynos5_clk_sclk_uart3.clk), - CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &exynos5_clk_sclk_mmc0.clk), - CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &exynos5_clk_sclk_mmc1.clk), - CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &exynos5_clk_sclk_mmc2.clk), - CLKDEV_INIT("s3c-sdhci.3", "mmc_busclk.2", &exynos5_clk_sclk_mmc3.clk), + CLKDEV_INIT("exynos4-sdhci.0", "mmc_busclk.2", &exynos5_clk_sclk_mmc0.clk), + CLKDEV_INIT("exynos4-sdhci.1", "mmc_busclk.2", &exynos5_clk_sclk_mmc1.clk), + CLKDEV_INIT("exynos4-sdhci.2", "mmc_busclk.2", &exynos5_clk_sclk_mmc2.clk), + CLKDEV_INIT("exynos4-sdhci.3", "mmc_busclk.2", &exynos5_clk_sclk_mmc3.clk), CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos5_clk_pdma0), CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos5_clk_pdma1), CLKDEV_INIT("dma-pl330.2", "apb_pclk", &exynos5_clk_mdma1), diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index 8614aab47cc0..b5e7f00da589 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -326,6 +326,11 @@ static void __init exynos4_map_io(void) s3c_fimc_setname(2, "exynos4-fimc"); s3c_fimc_setname(3, "exynos4-fimc"); + s3c_sdhci_setname(0, "exynos4-sdhci"); + s3c_sdhci_setname(1, "exynos4-sdhci"); + s3c_sdhci_setname(2, "exynos4-sdhci"); + s3c_sdhci_setname(3, "exynos4-sdhci"); + /* The I2C bus controllers are directly compatible with s3c2440 */ s3c_i2c0_setname("s3c2440-i2c"); s3c_i2c1_setname("s3c2440-i2c"); @@ -344,6 +349,11 @@ static void __init exynos5_map_io(void) s3c_device_i2c0.resource[1].start = EXYNOS5_IRQ_IIC; s3c_device_i2c0.resource[1].end = EXYNOS5_IRQ_IIC; + s3c_sdhci_setname(0, "exynos4-sdhci"); + s3c_sdhci_setname(1, "exynos4-sdhci"); + s3c_sdhci_setname(2, "exynos4-sdhci"); + s3c_sdhci_setname(3, "exynos4-sdhci"); + /* The I2C bus controllers are directly compatible with s3c2440 */ s3c_i2c0_setname("s3c2440-i2c"); s3c_i2c1_setname("s3c2440-i2c"); diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h index 317e246ffc56..e834c5ef437c 100644 --- a/arch/arm/plat-samsung/include/plat/sdhci.h +++ b/arch/arm/plat-samsung/include/plat/sdhci.h @@ -18,6 +18,8 @@ #ifndef __PLAT_S3C_SDHCI_H #define __PLAT_S3C_SDHCI_H __FILE__ +#include + struct platform_device; struct mmc_host; struct mmc_card; @@ -356,4 +358,30 @@ static inline void exynos4_default_sdhci3(void) { } #endif /* CONFIG_EXYNOS4_SETUP_SDHCI */ +static inline void s3c_sdhci_setname(int id, char *name) +{ + switch (id) { +#ifdef CONFIG_S3C_DEV_HSMMC + case 0: + s3c_device_hsmmc0.name = name; + break; +#endif +#ifdef CONFIG_S3C_DEV_HSMMC1 + case 1: + s3c_device_hsmmc1.name = name; + break; +#endif +#ifdef CONFIG_S3C_DEV_HSMMC2 + case 2: + s3c_device_hsmmc2.name = name; + break; +#endif +#ifdef CONFIG_S3C_DEV_HSMMC3 + case 3: + s3c_device_hsmmc3.name = name; + break; +#endif + } +} + #endif /* __PLAT_S3C_SDHCI_H */ From 5699b0ca05f781d496d20ba87f916bd9eec7ea6a Mon Sep 17 00:00:00 2001 From: Thomas Abraham Date: Fri, 20 Apr 2012 17:26:23 -0700 Subject: [PATCH 074/365] ARM: EXYNOS: Fix incorrect initialization of GIC Use the of_irq_init() call to setup the gic which also properly registers the gic device node pointer with gic irq domain, without which all interrupt specifier translations for gic fail. Signed-off-by: Thomas Abraham Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index b5e7f00da589..6c0e4f54c94d 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -547,7 +547,7 @@ void __init exynos5_init_irq(void) { int irq; - gic_init(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU); + of_irq_init(exynos4_dt_irq_match); for (irq = 0; irq < EXYNOS5_MAX_COMBINER_NR; irq++) { combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq), From 95b72eb0bdef6476b7e73061f0382adf46c5495a Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Fri, 20 Apr 2012 19:24:51 -0400 Subject: [PATCH 075/365] NFSv4: Ensure we do not reuse open owner names The NFSv4 spec is ambiguous about whether or not it is permissible to reuse open owner names, so play it safe. This patch adds a timestamp to the state_owner structure, and combines that with the IDA based uniquifier. Fixes a regression whereby the Linux server returns NFS4ERR_BAD_SEQID. Signed-off-by: Trond Myklebust --- fs/nfs/nfs4_fs.h | 1 + fs/nfs/nfs4proc.c | 6 +++--- fs/nfs/nfs4state.c | 1 + fs/nfs/nfs4xdr.c | 9 +++++---- include/linux/nfs_xdr.h | 7 ++++++- 5 files changed, 16 insertions(+), 8 deletions(-) diff --git a/fs/nfs/nfs4_fs.h b/fs/nfs/nfs4_fs.h index 97ecc863dd76..b6db9e33fb7b 100644 --- a/fs/nfs/nfs4_fs.h +++ b/fs/nfs/nfs4_fs.h @@ -59,6 +59,7 @@ struct nfs_unique_id { #define NFS_SEQID_CONFIRMED 1 struct nfs_seqid_counter { + ktime_t create_time; int owner_id; int flags; u32 counter; diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index f875cf305237..60d5f4c26dda 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -838,7 +838,8 @@ static struct nfs4_opendata *nfs4_opendata_alloc(struct dentry *dentry, p->o_arg.open_flags = flags; p->o_arg.fmode = fmode & (FMODE_READ|FMODE_WRITE); p->o_arg.clientid = server->nfs_client->cl_clientid; - p->o_arg.id = sp->so_seqid.owner_id; + p->o_arg.id.create_time = ktime_to_ns(sp->so_seqid.create_time); + p->o_arg.id.uniquifier = sp->so_seqid.owner_id; p->o_arg.name = &dentry->d_name; p->o_arg.server = server; p->o_arg.bitmask = server->attr_bitmask; @@ -1466,8 +1467,7 @@ static void nfs4_open_prepare(struct rpc_task *task, void *calldata) goto unlock_no_action; rcu_read_unlock(); } - /* Update sequence id. */ - data->o_arg.id = sp->so_seqid.owner_id; + /* Update client id. */ data->o_arg.clientid = sp->so_server->nfs_client->cl_clientid; if (data->o_arg.claim == NFS4_OPEN_CLAIM_PREVIOUS) { task->tk_msg.rpc_proc = &nfs4_procedures[NFSPROC4_CLNT_OPEN_NOATTR]; diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c index 0f43414eb25a..3b07f094f3a9 100644 --- a/fs/nfs/nfs4state.c +++ b/fs/nfs/nfs4state.c @@ -393,6 +393,7 @@ nfs4_remove_state_owner_locked(struct nfs4_state_owner *sp) static void nfs4_init_seqid_counter(struct nfs_seqid_counter *sc) { + sc->create_time = ktime_get(); sc->flags = 0; sc->counter = 0; spin_lock_init(&sc->lock); diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c index c74fdb114b48..77fc5f959c4e 100644 --- a/fs/nfs/nfs4xdr.c +++ b/fs/nfs/nfs4xdr.c @@ -74,7 +74,7 @@ static int nfs4_stat_to_errno(int); /* lock,open owner id: * we currently use size 2 (u64) out of (NFS4_OPAQUE_LIMIT >> 2) */ -#define open_owner_id_maxsz (1 + 1 + 4) +#define open_owner_id_maxsz (1 + 2 + 1 + 1 + 2) #define lock_owner_id_maxsz (1 + 1 + 4) #define decode_lockowner_maxsz (1 + XDR_QUADLEN(IDMAP_NAMESZ)) #define compound_encode_hdr_maxsz (3 + (NFS4_MAXTAGLEN >> 2)) @@ -1340,12 +1340,13 @@ static inline void encode_openhdr(struct xdr_stream *xdr, const struct nfs_opena */ encode_nfs4_seqid(xdr, arg->seqid); encode_share_access(xdr, arg->fmode); - p = reserve_space(xdr, 32); + p = reserve_space(xdr, 36); p = xdr_encode_hyper(p, arg->clientid); - *p++ = cpu_to_be32(20); + *p++ = cpu_to_be32(24); p = xdr_encode_opaque_fixed(p, "open id:", 8); *p++ = cpu_to_be32(arg->server->s_dev); - xdr_encode_hyper(p, arg->id); + *p++ = cpu_to_be32(arg->id.uniquifier); + xdr_encode_hyper(p, arg->id.create_time); } static inline void encode_createmode(struct xdr_stream *xdr, const struct nfs_openargs *arg) diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index bfd0d1bf6707..7ba3551a0414 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -312,6 +312,11 @@ struct nfs4_layoutreturn { int rpc_status; }; +struct stateowner_id { + __u64 create_time; + __u32 uniquifier; +}; + /* * Arguments to the open call. */ @@ -321,7 +326,7 @@ struct nfs_openargs { int open_flags; fmode_t fmode; __u64 clientid; - __u64 id; + struct stateowner_id id; union { struct { struct iattr * attrs; /* UNCHECKED, GUARDED */ From 899c612d74d4a242158a4db20367388d6299c028 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Fri, 20 Apr 2012 22:34:49 -0700 Subject: [PATCH 076/365] Input: synaptics - fix regression with "image sensor" trackpads commit 7968a5dd492ccc38345013e534ad4c8d6eb60ed1 Input: synaptics - add support for Relative mode Accidentally broke support for advanced gestures (multitouch) on some trackpads such as the one in my ThinkPad X220 by incorretly changing the condition for enabling them. This restores it. Signed-off-by: Benjamin Herrenschmidt CC: stable@kernel.org [3.3] Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/synaptics.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c index 8081a0a5d602..a4b14a41cbf4 100644 --- a/drivers/input/mouse/synaptics.c +++ b/drivers/input/mouse/synaptics.c @@ -274,7 +274,8 @@ static int synaptics_set_advanced_gesture_mode(struct psmouse *psmouse) static unsigned char param = 0xc8; struct synaptics_data *priv = psmouse->private; - if (!SYN_CAP_ADV_GESTURE(priv->ext_cap_0c)) + if (!(SYN_CAP_ADV_GESTURE(priv->ext_cap_0c) || + SYN_CAP_IMAGE_SENSOR(priv->ext_cap_0c))) return 0; if (psmouse_sliced_command(psmouse, SYN_QUE_MODEL)) From c77365c963cf8703ecf1004cd3b298068a3e1b76 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Sat, 21 Apr 2012 12:31:05 -0400 Subject: [PATCH 077/365] NFSv4: Ensure that we don't drop a state owner more than once Retest the RB_EMPTY_NODE() condition under the spin lock to ensure that we don't call rb_erase() more than once on the same state owner. Signed-off-by: Trond Myklebust --- fs/nfs/nfs4state.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c index 3b07f094f3a9..b300fb840b21 100644 --- a/fs/nfs/nfs4state.c +++ b/fs/nfs/nfs4state.c @@ -435,13 +435,17 @@ nfs4_alloc_state_owner(struct nfs_server *server, static void nfs4_drop_state_owner(struct nfs4_state_owner *sp) { - if (!RB_EMPTY_NODE(&sp->so_server_node)) { + struct rb_node *rb_node = &sp->so_server_node; + + if (!RB_EMPTY_NODE(rb_node)) { struct nfs_server *server = sp->so_server; struct nfs_client *clp = server->nfs_client; spin_lock(&clp->cl_lock); - rb_erase(&sp->so_server_node, &server->state_owners); - RB_CLEAR_NODE(&sp->so_server_node); + if (!RB_EMPTY_NODE(rb_node)) { + rb_erase(rb_node, &server->state_owners); + RB_CLEAR_NODE(rb_node); + } spin_unlock(&clp->cl_lock); } } From 7bf97bc27308cfdc7a8dadd40ae50f7c4cb09b01 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Sat, 21 Apr 2012 12:36:19 -0400 Subject: [PATCH 078/365] NFSv4: Keep dropped state owners on the LRU list for a while To ensure that we don't reuse their identifiers. Signed-off-by: Trond Myklebust --- fs/nfs/nfs4state.c | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-) diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c index b300fb840b21..7f0fcfc1fe9d 100644 --- a/fs/nfs/nfs4state.c +++ b/fs/nfs/nfs4state.c @@ -521,6 +521,14 @@ out: /** * nfs4_put_state_owner - Release a nfs4_state_owner * @sp: state owner data to release + * + * Note that we keep released state owners on an LRU + * list. + * This caches valid state owners so that they can be + * reused, to avoid the OPEN_CONFIRM on minor version 0. + * It also pins the uniquifier of dropped state owners for + * a while, to ensure that those state owner names are + * never reused. */ void nfs4_put_state_owner(struct nfs4_state_owner *sp) { @@ -530,15 +538,9 @@ void nfs4_put_state_owner(struct nfs4_state_owner *sp) if (!atomic_dec_and_lock(&sp->so_count, &clp->cl_lock)) return; - if (!RB_EMPTY_NODE(&sp->so_server_node)) { - sp->so_expires = jiffies; - list_add_tail(&sp->so_lru, &server->state_owners_lru); - spin_unlock(&clp->cl_lock); - } else { - nfs4_remove_state_owner_locked(sp); - spin_unlock(&clp->cl_lock); - nfs4_free_state_owner(sp); - } + sp->so_expires = jiffies; + list_add_tail(&sp->so_lru, &server->state_owners_lru); + spin_unlock(&clp->cl_lock); } /** From e95c8438ea1c56c254f0607c8fb6bca7f463c744 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Fri, 20 Apr 2012 21:03:36 +0200 Subject: [PATCH 079/365] drm/i915: fixup load-detect on enabled, but not active pipe Somehow we have a fast-path that tries to avoid going through the load-detect code when the encode already has a crtc associated. But this fails horribly when the crtc is off. The load detect pipe itself manages this case well (and also does not forget to restore the dpms state), so just rip out this special case. The issue seems to go back all the way to the commit that originally introduced load-detection on the vga output: commit e4a5d54f924ea5ce2913d9d0687d034004816465 Author: Ma Ling Date: Tue May 26 11:31:00 2009 +0800 drm/i915: Add support for VGA load detection (pre-945). Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=43020 Reported-by: Jean Delvare Reviewed-by: Chris Wilson Signed-Off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_crt.c | 29 +++++++++++------------------ 1 file changed, 11 insertions(+), 18 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c index 4d3d736a4f56..90b9793fd5da 100644 --- a/drivers/gpu/drm/i915/intel_crt.c +++ b/drivers/gpu/drm/i915/intel_crt.c @@ -430,8 +430,8 @@ intel_crt_detect(struct drm_connector *connector, bool force) { struct drm_device *dev = connector->dev; struct intel_crt *crt = intel_attached_crt(connector); - struct drm_crtc *crtc; enum drm_connector_status status; + struct intel_load_detect_pipe tmp; if (I915_HAS_HOTPLUG(dev)) { if (intel_crt_detect_hotplug(connector)) { @@ -450,23 +450,16 @@ intel_crt_detect(struct drm_connector *connector, bool force) return connector->status; /* for pre-945g platforms use load detect */ - crtc = crt->base.base.crtc; - if (crtc && crtc->enabled) { - status = intel_crt_load_detect(crt); - } else { - struct intel_load_detect_pipe tmp; - - if (intel_get_load_detect_pipe(&crt->base, connector, NULL, - &tmp)) { - if (intel_crt_detect_ddc(connector)) - status = connector_status_connected; - else - status = intel_crt_load_detect(crt); - intel_release_load_detect_pipe(&crt->base, connector, - &tmp); - } else - status = connector_status_unknown; - } + if (intel_get_load_detect_pipe(&crt->base, connector, NULL, + &tmp)) { + if (intel_crt_detect_ddc(connector)) + status = connector_status_connected; + else + status = intel_crt_load_detect(crt); + intel_release_load_detect_pipe(&crt->base, connector, + &tmp); + } else + status = connector_status_unknown; return status; } From 6f381fa344911d5a234b13574433cf23036f9467 Mon Sep 17 00:00:00 2001 From: Lin Ming Date: Thu, 12 Apr 2012 13:50:38 +0800 Subject: [PATCH 080/365] [SCSI] scsi_lib: use correct DMA device in __scsi_alloc_queue MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Currently, __scsi_alloc_queue uses SCSI host's parent device as DMA device to set segment boundary. But the parent device may not refer to the DMA device. For example, for ATA disk, SCSI host's parent device now refers to ATA port. Since commit d139b9b([SCSI] scsi_lib_dma: fix bug with dma maps on nested scsi objects), a new field Scsi_Host->dma_dev was introduced to refer to the real DMA device. Use ->dma_dev in __scsi_alloc_queue to correctly set segment boundary. Bug report: http://marc.info/?l=linux-ide&m=133177818318187&w=2 Reported-and-tested-by: Jörg Sommer Signed-off-by: Lin Ming Signed-off-by: James Bottomley --- drivers/scsi/scsi_lib.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index ead6405f3e51..5dfd7495d1a1 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -1638,7 +1638,7 @@ struct request_queue *__scsi_alloc_queue(struct Scsi_Host *shost, request_fn_proc *request_fn) { struct request_queue *q; - struct device *dev = shost->shost_gendev.parent; + struct device *dev = shost->dma_dev; q = blk_init_queue(request_fn, NULL); if (!q) From f8fc75dc576eac0c996e4a792a4701819d999260 Mon Sep 17 00:00:00 2001 From: Lin Ming Date: Thu, 12 Apr 2012 13:50:39 +0800 Subject: [PATCH 081/365] [SCSI] libata: Pass correct DMA device to scsi host MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Use scsi_add_host_with_dma in ata_scsi_add_hosts to pass in the correct DMA device(ATA host). Bug report: http://marc.info/?l=linux-ide&m=133177818318187&w=2 Reported-and-tested-by: Jörg Sommer Acked-by: Jeff Garzik Signed-off-by: Lin Ming Signed-off-by: James Bottomley --- drivers/ata/libata-scsi.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 93dabdcd2cbe..7832b1ad2327 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -3399,7 +3399,8 @@ int ata_scsi_add_hosts(struct ata_host *host, struct scsi_host_template *sht) */ shost->max_host_blocked = 1; - rc = scsi_add_host(ap->scsi_host, &ap->tdev); + rc = scsi_add_host_with_dma(ap->scsi_host, + &ap->tdev, ap->host->dev); if (rc) goto err_add; } From 6c557cfee08751d22aed34840f389b846f0f4508 Mon Sep 17 00:00:00 2001 From: Roland Stigge Date: Wed, 4 Apr 2012 10:34:37 +0200 Subject: [PATCH 082/365] i2c: pnx: Disable clk in suspend In the driver's suspend function, clk_enable() was used instead of clk_disable(). This is corrected with this patch. Signed-off-by: Roland Stigge Reviewed-by: Arnd Bergmann CC: stable@vger.kernel.org [wsa: reworded commit header slightly] Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-pnx.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c index 04be9f82e14b..eb8ad538c79f 100644 --- a/drivers/i2c/busses/i2c-pnx.c +++ b/drivers/i2c/busses/i2c-pnx.c @@ -546,8 +546,7 @@ static int i2c_pnx_controller_suspend(struct platform_device *pdev, { struct i2c_pnx_algo_data *alg_data = platform_get_drvdata(pdev); - /* FIXME: shouldn't this be clk_disable? */ - clk_enable(alg_data->clk); + clk_disable(alg_data->clk); return 0; } From f70893d08338b9cab8008d2e30404ce58930a513 Mon Sep 17 00:00:00 2001 From: Alok Chauhan Date: Mon, 2 Apr 2012 11:23:02 +0530 Subject: [PATCH 083/365] i2c: tegra: Add delay before resetting the controller after NACK NACK interrupt is generated before I2C controller generates the STOP condition on bus. Because of this reset of controller is happening before I2C controller could complete STOP condition. So wait for some time before resetting the controller so that STOP condition has delivered properly on bus. Added delay of 2 clock period before resetting the controller in case of NACK error. Signed-off-by: Alok Chauhan Acked-by: Stephen Warren [wsa: Reworded the commit msg and code comment a bit] Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-tegra.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c index e978635e60f0..55e5ea62ccee 100644 --- a/drivers/i2c/busses/i2c-tegra.c +++ b/drivers/i2c/busses/i2c-tegra.c @@ -516,6 +516,14 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev, if (likely(i2c_dev->msg_err == I2C_ERR_NONE)) return 0; + /* + * NACK interrupt is generated before the I2C controller generates the + * STOP condition on the bus. So wait for 2 clock periods before resetting + * the controller so that STOP condition has been delivered properly. + */ + if (i2c_dev->msg_err == I2C_ERR_NO_ACK) + udelay(DIV_ROUND_UP(2 * 1000000, i2c_dev->bus_clk_rate)); + tegra_i2c_init(i2c_dev); if (i2c_dev->msg_err == I2C_ERR_NO_ACK) { if (msg->flags & I2C_M_IGNORE_NAK) From 8a52f9f347da721b199b7f9dcc0168bbe7d0baae Mon Sep 17 00:00:00 2001 From: Tomoya MORINAGA Date: Mon, 26 Mar 2012 14:55:25 +0900 Subject: [PATCH 084/365] i2c-eg20t: change timeout value 50msec to 1000msec Currently, during i2c works alone, wait-event timeout is not occurred. However, as CPU load increases, timeout occurs frequently. So, I modified like this patch. Modifying like this patch, I've never seen the timeout event with high load test. Signed-off-by: Tomoya MORINAGA Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-eg20t.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-eg20t.c b/drivers/i2c/busses/i2c-eg20t.c index f086131cb1c7..4a46c8b18188 100644 --- a/drivers/i2c/busses/i2c-eg20t.c +++ b/drivers/i2c/busses/i2c-eg20t.c @@ -324,7 +324,7 @@ static s32 pch_i2c_wait_for_xfer_complete(struct i2c_algo_pch_data *adap) { long ret; ret = wait_event_timeout(pch_event, - (adap->pch_event_flag != 0), msecs_to_jiffies(50)); + (adap->pch_event_flag != 0), msecs_to_jiffies(1000)); if (ret == 0) { pch_err(adap, "timeout: %x\n", adap->pch_event_flag); From 096407136769ec10690abe1baba092abcb763662 Mon Sep 17 00:00:00 2001 From: Tomoya MORINAGA Date: Mon, 26 Mar 2012 14:55:23 +0900 Subject: [PATCH 085/365] i2c-eg20t: Modify MODULE_AUTHOR's email address Signed-off-by: Tomoya MORINAGA Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-eg20t.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-eg20t.c b/drivers/i2c/busses/i2c-eg20t.c index 4a46c8b18188..c811289b61e2 100644 --- a/drivers/i2c/busses/i2c-eg20t.c +++ b/drivers/i2c/busses/i2c-eg20t.c @@ -1063,6 +1063,6 @@ module_exit(pch_pci_exit); MODULE_DESCRIPTION("Intel EG20T PCH/LAPIS Semico ML7213/ML7223/ML7831 IOH I2C"); MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Tomoya MORINAGA. "); +MODULE_AUTHOR("Tomoya MORINAGA. "); module_param(pch_i2c_speed, int, (S_IRUSR | S_IWUSR)); module_param(pch_clk, int, (S_IRUSR | S_IWUSR)); From eae1415dda93fd4edcce0637aa64b3c9b567563f Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Fri, 20 Apr 2012 11:39:17 -0400 Subject: [PATCH 086/365] hwmon: (ad7314) Fix build warning The following build warning is seen in some configurations. drivers/hwmon/ad7314.c: In function 'ad7314_show_temperature': drivers/hwmon/ad7314.c:70: warning: 'data' may be used uninitialized in this function Fix by overloading the return value from ad7314_spi_read with both data and error code (the returned data is really u16 and needs to be converted into a signed value anyway). Signed-off-by: Guenter Roeck Cc: Jonathan Cameron Acked-by: Jean Delvare --- drivers/hwmon/ad7314.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/drivers/hwmon/ad7314.c b/drivers/hwmon/ad7314.c index ce43642ef03e..f85ce70d9677 100644 --- a/drivers/hwmon/ad7314.c +++ b/drivers/hwmon/ad7314.c @@ -47,7 +47,7 @@ struct ad7314_data { u16 rx ____cacheline_aligned; }; -static int ad7314_spi_read(struct ad7314_data *chip, s16 *data) +static int ad7314_spi_read(struct ad7314_data *chip) { int ret; @@ -57,9 +57,7 @@ static int ad7314_spi_read(struct ad7314_data *chip, s16 *data) return ret; } - *data = be16_to_cpu(chip->rx); - - return ret; + return be16_to_cpu(chip->rx); } static ssize_t ad7314_show_temperature(struct device *dev, @@ -70,12 +68,12 @@ static ssize_t ad7314_show_temperature(struct device *dev, s16 data; int ret; - ret = ad7314_spi_read(chip, &data); + ret = ad7314_spi_read(chip); if (ret < 0) return ret; switch (spi_get_device_id(chip->spi_dev)->driver_data) { case ad7314: - data = (data & AD7314_TEMP_MASK) >> AD7314_TEMP_OFFSET; + data = (ret & AD7314_TEMP_MASK) >> AD7314_TEMP_OFFSET; data = (data << 6) >> 6; return sprintf(buf, "%d\n", 250 * data); @@ -86,7 +84,7 @@ static ssize_t ad7314_show_temperature(struct device *dev, * with a sign bit - which is a 14 bit 2's complement * register. 1lsb - 31.25 milli degrees centigrade */ - data &= ADT7301_TEMP_MASK; + data = ret & ADT7301_TEMP_MASK; data = (data << 2) >> 2; return sprintf(buf, "%d\n", From 22b9153faa2263aa89625de25e71c7d44c8dbd16 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 9 Mar 2012 11:00:06 -0800 Subject: [PATCH 087/365] [SCSI] libsas: introduce sas_work to fix sas_drain_work vs sas_queue_work When requeuing work to a draining workqueue the last work instance may not be idle, so sas_queue_work() must not touch work->entry. Introduce sas_work with a drain_node list_head to have a private list for collecting work deferred due to drain collision. Fixes reports like: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [] process_one_work+0x2e/0x338 Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/libsas/sas_discover.c | 28 ++++++++++----------- drivers/scsi/libsas/sas_event.c | 24 ++++++++++-------- drivers/scsi/libsas/sas_init.c | 11 ++++---- drivers/scsi/libsas/sas_internal.h | 6 ++--- drivers/scsi/libsas/sas_phy.c | 21 ++++++---------- drivers/scsi/libsas/sas_port.c | 15 ++++------- include/scsi/libsas.h | 40 +++++++++++++++++++++++++++--- 7 files changed, 83 insertions(+), 62 deletions(-) diff --git a/drivers/scsi/libsas/sas_discover.c b/drivers/scsi/libsas/sas_discover.c index 364679675602..c7ac88288bf1 100644 --- a/drivers/scsi/libsas/sas_discover.c +++ b/drivers/scsi/libsas/sas_discover.c @@ -205,8 +205,7 @@ void sas_notify_lldd_dev_gone(struct domain_device *dev) static void sas_probe_devices(struct work_struct *work) { struct domain_device *dev, *n; - struct sas_discovery_event *ev = - container_of(work, struct sas_discovery_event, work); + struct sas_discovery_event *ev = to_sas_discovery_event(work); struct asd_sas_port *port = ev->port; clear_bit(DISCE_PROBE, &port->disc.pending); @@ -291,8 +290,7 @@ static void sas_unregister_common_dev(struct asd_sas_port *port, struct domain_d static void sas_destruct_devices(struct work_struct *work) { struct domain_device *dev, *n; - struct sas_discovery_event *ev = - container_of(work, struct sas_discovery_event, work); + struct sas_discovery_event *ev = to_sas_discovery_event(work); struct asd_sas_port *port = ev->port; clear_bit(DISCE_DESTRUCT, &port->disc.pending); @@ -377,8 +375,7 @@ static void sas_discover_domain(struct work_struct *work) { struct domain_device *dev; int error = 0; - struct sas_discovery_event *ev = - container_of(work, struct sas_discovery_event, work); + struct sas_discovery_event *ev = to_sas_discovery_event(work); struct asd_sas_port *port = ev->port; clear_bit(DISCE_DISCOVER_DOMAIN, &port->disc.pending); @@ -437,8 +434,7 @@ static void sas_discover_domain(struct work_struct *work) static void sas_revalidate_domain(struct work_struct *work) { int res = 0; - struct sas_discovery_event *ev = - container_of(work, struct sas_discovery_event, work); + struct sas_discovery_event *ev = to_sas_discovery_event(work); struct asd_sas_port *port = ev->port; struct sas_ha_struct *ha = port->ha; @@ -466,21 +462,25 @@ static void sas_revalidate_domain(struct work_struct *work) /* ---------- Events ---------- */ -static void sas_chain_work(struct sas_ha_struct *ha, struct work_struct *work) +static void sas_chain_work(struct sas_ha_struct *ha, struct sas_work *sw) { - /* chained work is not subject to SA_HA_DRAINING or SAS_HA_REGISTERED */ - scsi_queue_work(ha->core.shost, work); + /* chained work is not subject to SA_HA_DRAINING or + * SAS_HA_REGISTERED, because it is either submitted in the + * workqueue, or known to be submitted from a context that is + * not racing against draining + */ + scsi_queue_work(ha->core.shost, &sw->work); } static void sas_chain_event(int event, unsigned long *pending, - struct work_struct *work, + struct sas_work *sw, struct sas_ha_struct *ha) { if (!test_and_set_bit(event, pending)) { unsigned long flags; spin_lock_irqsave(&ha->state_lock, flags); - sas_chain_work(ha, work); + sas_chain_work(ha, sw); spin_unlock_irqrestore(&ha->state_lock, flags); } } @@ -519,7 +519,7 @@ void sas_init_disc(struct sas_discovery *disc, struct asd_sas_port *port) disc->pending = 0; for (i = 0; i < DISC_NUM_EVENTS; i++) { - INIT_WORK(&disc->disc_work[i].work, sas_event_fns[i]); + INIT_SAS_WORK(&disc->disc_work[i].work, sas_event_fns[i]); disc->disc_work[i].port = port; } } diff --git a/drivers/scsi/libsas/sas_event.c b/drivers/scsi/libsas/sas_event.c index 16639bbae629..4e4292d210c1 100644 --- a/drivers/scsi/libsas/sas_event.c +++ b/drivers/scsi/libsas/sas_event.c @@ -27,19 +27,21 @@ #include "sas_internal.h" #include "sas_dump.h" -void sas_queue_work(struct sas_ha_struct *ha, struct work_struct *work) +void sas_queue_work(struct sas_ha_struct *ha, struct sas_work *sw) { if (!test_bit(SAS_HA_REGISTERED, &ha->state)) return; - if (test_bit(SAS_HA_DRAINING, &ha->state)) - list_add(&work->entry, &ha->defer_q); - else - scsi_queue_work(ha->core.shost, work); + if (test_bit(SAS_HA_DRAINING, &ha->state)) { + /* add it to the defer list, if not already pending */ + if (list_empty(&sw->drain_node)) + list_add(&sw->drain_node, &ha->defer_q); + } else + scsi_queue_work(ha->core.shost, &sw->work); } static void sas_queue_event(int event, unsigned long *pending, - struct work_struct *work, + struct sas_work *work, struct sas_ha_struct *ha) { if (!test_and_set_bit(event, pending)) { @@ -55,7 +57,7 @@ static void sas_queue_event(int event, unsigned long *pending, void __sas_drain_work(struct sas_ha_struct *ha) { struct workqueue_struct *wq = ha->core.shost->work_q; - struct work_struct *w, *_w; + struct sas_work *sw, *_sw; set_bit(SAS_HA_DRAINING, &ha->state); /* flush submitters */ @@ -66,9 +68,9 @@ void __sas_drain_work(struct sas_ha_struct *ha) spin_lock_irq(&ha->state_lock); clear_bit(SAS_HA_DRAINING, &ha->state); - list_for_each_entry_safe(w, _w, &ha->defer_q, entry) { - list_del_init(&w->entry); - sas_queue_work(ha, w); + list_for_each_entry_safe(sw, _sw, &ha->defer_q, drain_node) { + list_del_init(&sw->drain_node); + sas_queue_work(ha, sw); } spin_unlock_irq(&ha->state_lock); } @@ -151,7 +153,7 @@ int sas_init_events(struct sas_ha_struct *sas_ha) int i; for (i = 0; i < HA_NUM_EVENTS; i++) { - INIT_WORK(&sas_ha->ha_events[i].work, sas_ha_event_fns[i]); + INIT_SAS_WORK(&sas_ha->ha_events[i].work, sas_ha_event_fns[i]); sas_ha->ha_events[i].ha = sas_ha; } diff --git a/drivers/scsi/libsas/sas_init.c b/drivers/scsi/libsas/sas_init.c index 120bff64be30..10cb5ae30977 100644 --- a/drivers/scsi/libsas/sas_init.c +++ b/drivers/scsi/libsas/sas_init.c @@ -94,8 +94,7 @@ void sas_hash_addr(u8 *hashed, const u8 *sas_addr) void sas_hae_reset(struct work_struct *work) { - struct sas_ha_event *ev = - container_of(work, struct sas_ha_event, work); + struct sas_ha_event *ev = to_sas_ha_event(work); struct sas_ha_struct *ha = ev->ha; clear_bit(HAE_RESET, &ha->pending); @@ -369,14 +368,14 @@ static void sas_phy_release(struct sas_phy *phy) static void phy_reset_work(struct work_struct *work) { - struct sas_phy_data *d = container_of(work, typeof(*d), reset_work); + struct sas_phy_data *d = container_of(work, typeof(*d), reset_work.work); d->reset_result = transport_sas_phy_reset(d->phy, d->hard_reset); } static void phy_enable_work(struct work_struct *work) { - struct sas_phy_data *d = container_of(work, typeof(*d), enable_work); + struct sas_phy_data *d = container_of(work, typeof(*d), enable_work.work); d->enable_result = sas_phy_enable(d->phy, d->enable); } @@ -389,8 +388,8 @@ static int sas_phy_setup(struct sas_phy *phy) return -ENOMEM; mutex_init(&d->event_lock); - INIT_WORK(&d->reset_work, phy_reset_work); - INIT_WORK(&d->enable_work, phy_enable_work); + INIT_SAS_WORK(&d->reset_work, phy_reset_work); + INIT_SAS_WORK(&d->enable_work, phy_enable_work); d->phy = phy; phy->hostdata = d; diff --git a/drivers/scsi/libsas/sas_internal.h b/drivers/scsi/libsas/sas_internal.h index f05c63879949..507e4cf12e56 100644 --- a/drivers/scsi/libsas/sas_internal.h +++ b/drivers/scsi/libsas/sas_internal.h @@ -45,10 +45,10 @@ struct sas_phy_data { struct mutex event_lock; int hard_reset; int reset_result; - struct work_struct reset_work; + struct sas_work reset_work; int enable; int enable_result; - struct work_struct enable_work; + struct sas_work enable_work; }; void sas_scsi_recover_host(struct Scsi_Host *shost); @@ -80,7 +80,7 @@ void sas_porte_broadcast_rcvd(struct work_struct *work); void sas_porte_link_reset_err(struct work_struct *work); void sas_porte_timer_event(struct work_struct *work); void sas_porte_hard_reset(struct work_struct *work); -void sas_queue_work(struct sas_ha_struct *ha, struct work_struct *work); +void sas_queue_work(struct sas_ha_struct *ha, struct sas_work *sw); int sas_notify_lldd_dev_found(struct domain_device *); void sas_notify_lldd_dev_gone(struct domain_device *); diff --git a/drivers/scsi/libsas/sas_phy.c b/drivers/scsi/libsas/sas_phy.c index dcfd4a9105c5..521422e857ab 100644 --- a/drivers/scsi/libsas/sas_phy.c +++ b/drivers/scsi/libsas/sas_phy.c @@ -32,8 +32,7 @@ static void sas_phye_loss_of_signal(struct work_struct *work) { - struct asd_sas_event *ev = - container_of(work, struct asd_sas_event, work); + struct asd_sas_event *ev = to_asd_sas_event(work); struct asd_sas_phy *phy = ev->phy; clear_bit(PHYE_LOSS_OF_SIGNAL, &phy->phy_events_pending); @@ -43,8 +42,7 @@ static void sas_phye_loss_of_signal(struct work_struct *work) static void sas_phye_oob_done(struct work_struct *work) { - struct asd_sas_event *ev = - container_of(work, struct asd_sas_event, work); + struct asd_sas_event *ev = to_asd_sas_event(work); struct asd_sas_phy *phy = ev->phy; clear_bit(PHYE_OOB_DONE, &phy->phy_events_pending); @@ -53,8 +51,7 @@ static void sas_phye_oob_done(struct work_struct *work) static void sas_phye_oob_error(struct work_struct *work) { - struct asd_sas_event *ev = - container_of(work, struct asd_sas_event, work); + struct asd_sas_event *ev = to_asd_sas_event(work); struct asd_sas_phy *phy = ev->phy; struct sas_ha_struct *sas_ha = phy->ha; struct asd_sas_port *port = phy->port; @@ -85,8 +82,7 @@ static void sas_phye_oob_error(struct work_struct *work) static void sas_phye_spinup_hold(struct work_struct *work) { - struct asd_sas_event *ev = - container_of(work, struct asd_sas_event, work); + struct asd_sas_event *ev = to_asd_sas_event(work); struct asd_sas_phy *phy = ev->phy; struct sas_ha_struct *sas_ha = phy->ha; struct sas_internal *i = @@ -127,14 +123,12 @@ int sas_register_phys(struct sas_ha_struct *sas_ha) phy->error = 0; INIT_LIST_HEAD(&phy->port_phy_el); for (k = 0; k < PORT_NUM_EVENTS; k++) { - INIT_WORK(&phy->port_events[k].work, - sas_port_event_fns[k]); + INIT_SAS_WORK(&phy->port_events[k].work, sas_port_event_fns[k]); phy->port_events[k].phy = phy; } for (k = 0; k < PHY_NUM_EVENTS; k++) { - INIT_WORK(&phy->phy_events[k].work, - sas_phy_event_fns[k]); + INIT_SAS_WORK(&phy->phy_events[k].work, sas_phy_event_fns[k]); phy->phy_events[k].phy = phy; } @@ -144,8 +138,7 @@ int sas_register_phys(struct sas_ha_struct *sas_ha) spin_lock_init(&phy->sas_prim_lock); phy->frame_rcvd_size = 0; - phy->phy = sas_phy_alloc(&sas_ha->core.shost->shost_gendev, - i); + phy->phy = sas_phy_alloc(&sas_ha->core.shost->shost_gendev, i); if (!phy->phy) return -ENOMEM; diff --git a/drivers/scsi/libsas/sas_port.c b/drivers/scsi/libsas/sas_port.c index eb19c016d500..1cf7d75ad5eb 100644 --- a/drivers/scsi/libsas/sas_port.c +++ b/drivers/scsi/libsas/sas_port.c @@ -208,8 +208,7 @@ void sas_deform_port(struct asd_sas_phy *phy, int gone) void sas_porte_bytes_dmaed(struct work_struct *work) { - struct asd_sas_event *ev = - container_of(work, struct asd_sas_event, work); + struct asd_sas_event *ev = to_asd_sas_event(work); struct asd_sas_phy *phy = ev->phy; clear_bit(PORTE_BYTES_DMAED, &phy->port_events_pending); @@ -219,8 +218,7 @@ void sas_porte_bytes_dmaed(struct work_struct *work) void sas_porte_broadcast_rcvd(struct work_struct *work) { - struct asd_sas_event *ev = - container_of(work, struct asd_sas_event, work); + struct asd_sas_event *ev = to_asd_sas_event(work); struct asd_sas_phy *phy = ev->phy; unsigned long flags; u32 prim; @@ -237,8 +235,7 @@ void sas_porte_broadcast_rcvd(struct work_struct *work) void sas_porte_link_reset_err(struct work_struct *work) { - struct asd_sas_event *ev = - container_of(work, struct asd_sas_event, work); + struct asd_sas_event *ev = to_asd_sas_event(work); struct asd_sas_phy *phy = ev->phy; clear_bit(PORTE_LINK_RESET_ERR, &phy->port_events_pending); @@ -248,8 +245,7 @@ void sas_porte_link_reset_err(struct work_struct *work) void sas_porte_timer_event(struct work_struct *work) { - struct asd_sas_event *ev = - container_of(work, struct asd_sas_event, work); + struct asd_sas_event *ev = to_asd_sas_event(work); struct asd_sas_phy *phy = ev->phy; clear_bit(PORTE_TIMER_EVENT, &phy->port_events_pending); @@ -259,8 +255,7 @@ void sas_porte_timer_event(struct work_struct *work) void sas_porte_hard_reset(struct work_struct *work) { - struct asd_sas_event *ev = - container_of(work, struct asd_sas_event, work); + struct asd_sas_event *ev = to_asd_sas_event(work); struct asd_sas_phy *phy = ev->phy; clear_bit(PORTE_HARD_RESET, &phy->port_events_pending); diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h index 5f5ed1b8b41b..f4f1c96dca72 100644 --- a/include/scsi/libsas.h +++ b/include/scsi/libsas.h @@ -217,11 +217,29 @@ struct domain_device { struct kref kref; }; -struct sas_discovery_event { +struct sas_work { + struct list_head drain_node; struct work_struct work; +}; + +static inline void INIT_SAS_WORK(struct sas_work *sw, void (*fn)(struct work_struct *)) +{ + INIT_WORK(&sw->work, fn); + INIT_LIST_HEAD(&sw->drain_node); +} + +struct sas_discovery_event { + struct sas_work work; struct asd_sas_port *port; }; +static inline struct sas_discovery_event *to_sas_discovery_event(struct work_struct *work) +{ + struct sas_discovery_event *ev = container_of(work, typeof(*ev), work.work); + + return ev; +} + struct sas_discovery { struct sas_discovery_event disc_work[DISC_NUM_EVENTS]; unsigned long pending; @@ -244,7 +262,7 @@ struct asd_sas_port { struct list_head destroy_list; enum sas_linkrate linkrate; - struct work_struct work; + struct sas_work work; /* public: */ int id; @@ -270,10 +288,17 @@ struct asd_sas_port { }; struct asd_sas_event { - struct work_struct work; + struct sas_work work; struct asd_sas_phy *phy; }; +static inline struct asd_sas_event *to_asd_sas_event(struct work_struct *work) +{ + struct asd_sas_event *ev = container_of(work, typeof(*ev), work.work); + + return ev; +} + /* The phy pretty much is controlled by the LLDD. * The class only reads those fields. */ @@ -333,10 +358,17 @@ struct scsi_core { }; struct sas_ha_event { - struct work_struct work; + struct sas_work work; struct sas_ha_struct *ha; }; +static inline struct sas_ha_event *to_sas_ha_event(struct work_struct *work) +{ + struct sas_ha_event *ev = container_of(work, typeof(*ev), work.work); + + return ev; +} + enum sas_ha_state { SAS_HA_REGISTERED, SAS_HA_DRAINING, From 1699490db339e2c6b3037ea8e7dcd6b2755b688e Mon Sep 17 00:00:00 2001 From: Thomas Jackson Date: Fri, 17 Feb 2012 18:33:10 -0800 Subject: [PATCH 088/365] [SCSI] libsas: fix sas_find_bcast_phy() in the presence of 'vacant' phys If an expander reports 'PHY VACANT' for a phy index prior to the one that generated a BCN libsas fails rediscovery. Since a vacant phy is defined as a valid phy index that will never have an attached device just continue the search. Cc: Signed-off-by: Thomas Jackson Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/libsas/sas_expander.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c index 05acd9e35fc4..833bea067a77 100644 --- a/drivers/scsi/libsas/sas_expander.c +++ b/drivers/scsi/libsas/sas_expander.c @@ -1718,9 +1718,17 @@ static int sas_find_bcast_phy(struct domain_device *dev, int *phy_id, int phy_change_count = 0; res = sas_get_phy_change_count(dev, i, &phy_change_count); - if (res) - goto out; - else if (phy_change_count != ex->ex_phy[i].phy_change_count) { + switch (res) { + case SMP_RESP_PHY_VACANT: + case SMP_RESP_NO_PHY: + continue; + case SMP_RESP_FUNC_ACC: + break; + default: + return res; + } + + if (phy_change_count != ex->ex_phy[i].phy_change_count) { if (update) ex->ex_phy[i].phy_change_count = phy_change_count; @@ -1728,8 +1736,7 @@ static int sas_find_bcast_phy(struct domain_device *dev, int *phy_id, return 0; } } -out: - return res; + return 0; } static int sas_get_ex_change_count(struct domain_device *dev, int *ecc) From ec236e526777ea8825e6e0c3673a40389692eabf Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Mon, 12 Mar 2012 11:38:26 -0700 Subject: [PATCH 089/365] [SCSI] libsas: fix sas_get_port_device regression Commit 899fcf4 "[SCSI] libsas: set attached device type and target protocols for local phys" setup 'phy' to be dereferenced after list_for_each_entry(phy, &port->phy_list, port_phy_el) (i.e. phy == &port->phy_list) resulting in reports like: BUG: unable to handle kernel NULL pointer dereference at 00000000000002b0 IP: [] sas_discover_domain+0x29e/0x4fb [libsas] ...fix by deferring sas_phy_set_target() to the end of sas_get_port_device(). Reported-by: Tom Jackson Tested-by: Tom Jackson Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/libsas/sas_discover.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/libsas/sas_discover.c b/drivers/scsi/libsas/sas_discover.c index c7ac88288bf1..658f16cc2f03 100644 --- a/drivers/scsi/libsas/sas_discover.c +++ b/drivers/scsi/libsas/sas_discover.c @@ -134,10 +134,6 @@ static int sas_get_port_device(struct asd_sas_port *port) return -ENODEV; } - spin_lock_irq(&port->phy_list_lock); - list_for_each_entry(phy, &port->phy_list, port_phy_el) - sas_phy_set_target(phy, dev); - spin_unlock_irq(&port->phy_list_lock); rphy->identify.phy_identifier = phy->phy->identify.phy_identifier; memcpy(dev->sas_addr, port->attached_sas_addr, SAS_ADDR_SIZE); sas_fill_in_rphy(dev, rphy); @@ -164,6 +160,11 @@ static int sas_get_port_device(struct asd_sas_port *port) spin_unlock_irq(&port->dev_list_lock); } + spin_lock_irq(&port->phy_list_lock); + list_for_each_entry(phy, &port->phy_list, port_phy_el) + sas_phy_set_target(phy, dev); + spin_unlock_irq(&port->phy_list_lock); + return 0; } From 9487669fc225092cf315e1291ece28e23e6754f3 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 20 Mar 2012 10:53:24 -0700 Subject: [PATCH 090/365] [SCSI] libsas: unify domain_device sas_rphy lifetimes Since the domain_device can out live the scsi_target we need the rphy to follow suit otherwise we run into issues like: BUG: unable to handle kernel NULL pointer dereference at 0000000000000050 IP: [] sas_ata_printk+0x43/0x6f [libsas] PGD 0 Oops: 0000 [#1] SMP CPU 1 Modules linked in: ses enclosure isci libsas scsi_transport_sas fuse sunrpc cpufreq_ondemand acpi_cpufreq freq_table mperf microcode pcspkr igb joydev iTCO_wdt ioatdma iTCO_vendor_support i2c_i801 i2c_core dca wmi hed ipv6 pata_acpi ata_generic [last unloaded: scsi_wait_scan] Pid: 129, comm: kworker/u:3 Not tainted 3.3.0-rc5-isci+ #1 Intel Corporation SandyBridge Platform/To be filled by O.E.M. RIP: 0010:[] [] sas_ata_printk+0x43/0x6f [libsas] RSP: 0018:ffff88042232dd70 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff8804283165b8 RCX: ffff88042232dda0 RDX: ffff88042232dd78 RSI: ffff8804283165b8 RDI: ffffffffa01188d7 RBP: ffff88042232ddd0 R08: ffff880388454000 R09: ffff8803edfde1f8 R10: ffff8803edfde1f8 R11: ffff8803edfde1f8 R12: ffff880428316750 R13: ffff880388454000 R14: ffff8803f88b31d0 R15: ffff8803f8b21d50 FS: 0000000000000000(0000) GS:ffff88042ee20000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000050 CR3: 0000000001a05000 CR4: 00000000000406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process kworker/u:3 (pid: 129, threadinfo ffff88042232c000, task ffff88042230c920) Stack: 0000000000000000 ffff880400000018 ffff88042232dde0 ffff88042232dda0 ffffffffa01188c4 ffff88042ee93af0 ffff88042232ddb0 ffffffff8100e047 ffff88042232de10 ffff880420e5a2c8 ffff8803f8b21d50 ffff8803edfde1f8 Call Trace: [] ? load_TLS+0xb/0xf [] async_sas_ata_eh+0x66/0x95 [libsas] [] async_run_entry_fn+0x9e/0x131 Reported-by: Tom Jackson Tested-by: Tom Jackson Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/libsas/sas_discover.c | 11 ++++++----- drivers/scsi/libsas/sas_expander.c | 6 ++++-- 2 files changed, 10 insertions(+), 7 deletions(-) diff --git a/drivers/scsi/libsas/sas_discover.c b/drivers/scsi/libsas/sas_discover.c index 658f16cc2f03..13b5891f9961 100644 --- a/drivers/scsi/libsas/sas_discover.c +++ b/drivers/scsi/libsas/sas_discover.c @@ -151,6 +151,7 @@ static int sas_get_port_device(struct asd_sas_port *port) sas_device_set_phy(dev, port->port); dev->rphy = rphy; + get_device(&dev->rphy->dev); if (dev_is_sata(dev) || dev->dev_type == SAS_END_DEV) list_add_tail(&dev->disco_list_node, &port->disco_list); @@ -255,6 +256,9 @@ void sas_free_device(struct kref *kref) { struct domain_device *dev = container_of(kref, typeof(*dev), kref); + put_device(&dev->rphy->dev); + dev->rphy = NULL; + if (dev->parent) sas_put_device(dev->parent); @@ -301,7 +305,6 @@ static void sas_destruct_devices(struct work_struct *work) sas_remove_children(&dev->rphy->dev); sas_rphy_delete(dev->rphy); - dev->rphy = NULL; sas_unregister_common_dev(port, dev); } } @@ -313,11 +316,11 @@ void sas_unregister_dev(struct asd_sas_port *port, struct domain_device *dev) /* this rphy never saw sas_rphy_add */ list_del_init(&dev->disco_list_node); sas_rphy_free(dev->rphy); - dev->rphy = NULL; sas_unregister_common_dev(port, dev); + return; } - if (dev->rphy && !test_and_set_bit(SAS_DEV_DESTROY, &dev->state)) { + if (!test_and_set_bit(SAS_DEV_DESTROY, &dev->state)) { sas_rphy_unlink(dev->rphy); list_move_tail(&dev->disco_list_node, &port->destroy_list); sas_discover_event(dev->port, DISCE_DESTRUCT); @@ -417,8 +420,6 @@ static void sas_discover_domain(struct work_struct *work) if (error) { sas_rphy_free(dev->rphy); - dev->rphy = NULL; - list_del_init(&dev->disco_list_node); spin_lock_irq(&port->dev_list_lock); list_del_init(&dev->dev_list_node); diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c index 833bea067a77..37c3c3f5f35d 100644 --- a/drivers/scsi/libsas/sas_expander.c +++ b/drivers/scsi/libsas/sas_expander.c @@ -783,6 +783,7 @@ static struct domain_device *sas_ex_discover_end_dev( sas_init_dev(child); child->rphy = rphy; + get_device(&rphy->dev); list_add_tail(&child->disco_list_node, &parent->port->disco_list); @@ -806,6 +807,7 @@ static struct domain_device *sas_ex_discover_end_dev( sas_init_dev(child); child->rphy = rphy; + get_device(&rphy->dev); sas_fill_in_rphy(child, rphy); list_add_tail(&child->disco_list_node, &parent->port->disco_list); @@ -830,8 +832,6 @@ static struct domain_device *sas_ex_discover_end_dev( out_list_del: sas_rphy_free(child->rphy); - child->rphy = NULL; - list_del(&child->disco_list_node); spin_lock_irq(&parent->port->dev_list_lock); list_del(&child->dev_list_node); @@ -911,6 +911,7 @@ static struct domain_device *sas_ex_discover_expander( } port = parent->port; child->rphy = rphy; + get_device(&rphy->dev); edev = rphy_to_expander_device(rphy); child->dev_type = phy->attached_dev_type; kref_get(&parent->kref); @@ -934,6 +935,7 @@ static struct domain_device *sas_ex_discover_expander( res = sas_discover_expander(child); if (res) { + sas_rphy_delete(rphy); spin_lock_irq(&parent->port->dev_list_lock); list_del(&child->dev_list_node); spin_unlock_irq(&parent->port->dev_list_lock); From 0f3fce5cc77e1f35758ef0e46a989e76e5046a7b Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 20 Mar 2012 13:24:29 -0700 Subject: [PATCH 091/365] [SCSI] libsas: fix ata_eh clobbering ex_phys via smp_ata_check_ready The check_ready implementation in the expander-attached ata device case polls on sas_ex_phy_discover(). The effect is that the ex_phy fields (critically ->attached_sas_addr) can change. When ata_eh ends and libsas comes along to revalidate the domain sas_unregister_devs_sas_addr() can fail to lookup devices to remove, or fail to re-add an ata device that ata_eh marked as disabled. So change the code to skip the sas_address and change count updates when ata_eh is active. Cc: Jack Wang Tested-by: Maciej Patelczyk Tested-by: Bartek Nowakowski Tested-by: Jacek Danecki Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/libsas/sas_expander.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c index 37c3c3f5f35d..c1f91b1c27c3 100644 --- a/drivers/scsi/libsas/sas_expander.c +++ b/drivers/scsi/libsas/sas_expander.c @@ -202,6 +202,7 @@ static void sas_set_ex_phy(struct domain_device *dev, int phy_id, void *rsp) u8 sas_addr[SAS_ADDR_SIZE]; struct smp_resp *resp = rsp; struct discover_resp *dr = &resp->disc; + struct sas_ha_struct *ha = dev->port->ha; struct expander_device *ex = &dev->ex_dev; struct ex_phy *phy = &ex->ex_phy[phy_id]; struct sas_rphy *rphy = dev->rphy; @@ -209,6 +210,8 @@ static void sas_set_ex_phy(struct domain_device *dev, int phy_id, void *rsp) char *type; if (new_phy) { + if (WARN_ON_ONCE(test_bit(SAS_HA_ATA_EH_ACTIVE, &ha->state))) + return; phy->phy = sas_phy_alloc(&rphy->dev, phy_id); /* FIXME: error_handling */ @@ -233,6 +236,8 @@ static void sas_set_ex_phy(struct domain_device *dev, int phy_id, void *rsp) memcpy(sas_addr, phy->attached_sas_addr, SAS_ADDR_SIZE); phy->attached_dev_type = to_dev_type(dr); + if (test_bit(SAS_HA_ATA_EH_ACTIVE, &ha->state)) + goto out; phy->phy_id = phy_id; phy->linkrate = dr->linkrate; phy->attached_sata_host = dr->attached_sata_host; @@ -266,6 +271,7 @@ static void sas_set_ex_phy(struct domain_device *dev, int phy_id, void *rsp) return; } + out: switch (phy->attached_dev_type) { case SATA_PENDING: type = "stp pending"; @@ -304,7 +310,15 @@ static void sas_set_ex_phy(struct domain_device *dev, int phy_id, void *rsp) else return; - SAS_DPRINTK("ex %016llx phy%02d:%c:%X attached: %016llx (%s)\n", + /* if the attached device type changed and ata_eh is active, + * make sure we run revalidation when eh completes (see: + * sas_enable_revalidation) + */ + if (test_bit(SAS_HA_ATA_EH_ACTIVE, &ha->state)) + set_bit(DISCE_REVALIDATE_DOMAIN, &dev->port->disc.pending); + + SAS_DPRINTK("%sex %016llx phy%02d:%c:%X attached: %016llx (%s)\n", + test_bit(SAS_HA_ATA_EH_ACTIVE, &ha->state) ? "ata: " : "", SAS_ADDR(dev->sas_addr), phy->phy_id, sas_route_char(dev, phy), phy->linkrate, SAS_ADDR(phy->attached_sas_addr), type); From b2024459252a9d2d312ee562f86f332a1498f412 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 21 Mar 2012 21:09:07 -0700 Subject: [PATCH 092/365] [SCSI] libsas, libata: fix start of life for a sas ata_port This changes the ordering of initialization and probing events from: 1/ allocate rphy in PORTE_BYTES_DMAED, DISCE_REVALIDATE_DOMAIN 2/ allocate ata_port and schedule port probe in DISCE_PROBE ...to: 1/ allocate ata_port in PORTE_BYTES_DMAED, DISCE_REVALIDATE_DOMAIN 2/ allocate rphy in PORTE_BYTES_DMAED, DISCE_REVALIDATE_DOMAIN 3/ schedule port probe in DISCE_PROBE This ordering prevents PHYE_SIGNAL_LOSS_EVENTS from sneaking in to destrory ata devices before they have been fully initialized: BUG: unable to handle kernel paging request at 0000000000003b10 IP: [] sas_ata_end_eh+0x12/0x5e [libsas] ... [] sas_unregister_common_dev+0x78/0xc9 [libsas] [] sas_unregister_dev+0x4f/0xad [libsas] [] sas_unregister_domain_devices+0x7f/0xbf [libsas] [] sas_deform_port+0x61/0x1b8 [libsas] [] sas_phye_loss_of_signal+0x29/0x2b [libsas] ...and kills the awkward "sata domain_device briefly existing in the domain without an ata_port" state. Reported-by: Michal Kosciowski Signed-off-by: Dan Williams Acked-by: Jeff Garzik Signed-off-by: James Bottomley --- drivers/ata/libata-scsi.c | 37 +++++++++++++++++------------- drivers/scsi/ipr.c | 6 ++++- drivers/scsi/libsas/sas_ata.c | 33 ++++++++------------------ drivers/scsi/libsas/sas_discover.c | 13 ++++++++--- drivers/scsi/libsas/sas_expander.c | 10 ++++---- include/linux/libata.h | 3 ++- include/scsi/sas_ata.h | 4 ++-- 7 files changed, 56 insertions(+), 50 deletions(-) diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 7832b1ad2327..22226350cd0c 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -3839,18 +3839,25 @@ void ata_sas_port_stop(struct ata_port *ap) } EXPORT_SYMBOL_GPL(ata_sas_port_stop); -int ata_sas_async_port_init(struct ata_port *ap) +/** + * ata_sas_async_probe - simply schedule probing and return + * @ap: Port to probe + * + * For batch scheduling of probe for sas attached ata devices, assumes + * the port has already been through ata_sas_port_init() + */ +void ata_sas_async_probe(struct ata_port *ap) { - int rc = ap->ops->port_start(ap); - - if (!rc) { - ap->print_id = atomic_inc_return(&ata_print_id); - __ata_port_probe(ap); - } - - return rc; + __ata_port_probe(ap); } -EXPORT_SYMBOL_GPL(ata_sas_async_port_init); +EXPORT_SYMBOL_GPL(ata_sas_async_probe); + +int ata_sas_sync_probe(struct ata_port *ap) +{ + return ata_port_probe(ap); +} +EXPORT_SYMBOL_GPL(ata_sas_sync_probe); + /** * ata_sas_port_init - Initialize a SATA device @@ -3867,12 +3874,10 @@ int ata_sas_port_init(struct ata_port *ap) { int rc = ap->ops->port_start(ap); - if (!rc) { - ap->print_id = atomic_inc_return(&ata_print_id); - rc = ata_port_probe(ap); - } - - return rc; + if (rc) + return rc; + ap->print_id = atomic_inc_return(&ata_print_id); + return 0; } EXPORT_SYMBOL_GPL(ata_sas_port_init); diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c index e002cd466e9a..467dc38246f9 100644 --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -4549,8 +4549,12 @@ static int ipr_ata_slave_alloc(struct scsi_device *sdev) ENTER; if (sdev->sdev_target) sata_port = sdev->sdev_target->hostdata; - if (sata_port) + if (sata_port) { rc = ata_sas_port_init(sata_port->ap); + if (rc == 0) + rc = ata_sas_sync_probe(sata_port->ap); + } + if (rc) ipr_slave_destroy(sdev); diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c index bc0cecc6ad62..441d88ad99a7 100644 --- a/drivers/scsi/libsas/sas_ata.c +++ b/drivers/scsi/libsas/sas_ata.c @@ -546,11 +546,12 @@ static struct ata_port_info sata_port_info = { .port_ops = &sas_sata_ops }; -int sas_ata_init_host_and_port(struct domain_device *found_dev) +int sas_ata_init(struct domain_device *found_dev) { struct sas_ha_struct *ha = found_dev->port->ha; struct Scsi_Host *shost = ha->core.shost; struct ata_port *ap; + int rc; ata_host_init(&found_dev->sata_dev.ata_host, ha->dev, @@ -567,8 +568,11 @@ int sas_ata_init_host_and_port(struct domain_device *found_dev) ap->private_data = found_dev; ap->cbl = ATA_CBL_SATA; ap->scsi_host = shost; - /* publish initialized ata port */ - smp_wmb(); + rc = ata_sas_port_init(ap); + if (rc) { + ata_sas_port_destroy(ap); + return rc; + } found_dev->sata_dev.ap = ap; return 0; @@ -648,18 +652,13 @@ static void sas_get_ata_command_set(struct domain_device *dev) void sas_probe_sata(struct asd_sas_port *port) { struct domain_device *dev, *n; - int err; mutex_lock(&port->ha->disco_mutex); - list_for_each_entry_safe(dev, n, &port->disco_list, disco_list_node) { + list_for_each_entry(dev, &port->disco_list, disco_list_node) { if (!dev_is_sata(dev)) continue; - err = sas_ata_init_host_and_port(dev); - if (err) - sas_fail_probe(dev, __func__, err); - else - ata_sas_async_port_init(dev->sata_dev.ap); + ata_sas_async_probe(dev->sata_dev.ap); } mutex_unlock(&port->ha->disco_mutex); @@ -718,18 +717,6 @@ static void async_sas_ata_eh(void *data, async_cookie_t cookie) sas_put_device(dev); } -static bool sas_ata_dev_eh_valid(struct domain_device *dev) -{ - struct ata_port *ap; - - if (!dev_is_sata(dev)) - return false; - ap = dev->sata_dev.ap; - /* consume fully initialized ata ports */ - smp_rmb(); - return !!ap; -} - void sas_ata_strategy_handler(struct Scsi_Host *shost) { struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost); @@ -753,7 +740,7 @@ void sas_ata_strategy_handler(struct Scsi_Host *shost) spin_lock(&port->dev_list_lock); list_for_each_entry(dev, &port->dev_list, dev_list_node) { - if (!sas_ata_dev_eh_valid(dev)) + if (!dev_is_sata(dev)) continue; async_schedule_domain(async_sas_ata_eh, dev, &async); } diff --git a/drivers/scsi/libsas/sas_discover.c b/drivers/scsi/libsas/sas_discover.c index 13b5891f9961..629a0865b130 100644 --- a/drivers/scsi/libsas/sas_discover.c +++ b/drivers/scsi/libsas/sas_discover.c @@ -72,6 +72,7 @@ static int sas_get_port_device(struct asd_sas_port *port) struct asd_sas_phy *phy; struct sas_rphy *rphy; struct domain_device *dev; + int rc = -ENODEV; dev = sas_alloc_device(); if (!dev) @@ -110,9 +111,16 @@ static int sas_get_port_device(struct asd_sas_port *port) sas_init_dev(dev); + dev->port = port; switch (dev->dev_type) { - case SAS_END_DEV: case SATA_DEV: + rc = sas_ata_init(dev); + if (rc) { + rphy = NULL; + break; + } + /* fall through */ + case SAS_END_DEV: rphy = sas_end_device_alloc(port->port); break; case EDGE_DEV: @@ -131,7 +139,7 @@ static int sas_get_port_device(struct asd_sas_port *port) if (!rphy) { sas_put_device(dev); - return -ENODEV; + return rc; } rphy->identify.phy_identifier = phy->phy->identify.phy_identifier; @@ -139,7 +147,6 @@ static int sas_get_port_device(struct asd_sas_port *port) sas_fill_in_rphy(dev, rphy); sas_hash_addr(dev->hashed_sas_addr, dev->sas_addr); port->port_dev = dev; - dev->port = port; dev->linkrate = port->linkrate; dev->min_linkrate = port->linkrate; dev->max_linkrate = port->linkrate; diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c index c1f91b1c27c3..75247a176c6b 100644 --- a/drivers/scsi/libsas/sas_expander.c +++ b/drivers/scsi/libsas/sas_expander.c @@ -790,11 +790,13 @@ static struct domain_device *sas_ex_discover_end_dev( if (res) goto out_free; - rphy = sas_end_device_alloc(phy->port); - if (unlikely(!rphy)) - goto out_free; - sas_init_dev(child); + res = sas_ata_init(child); + if (res) + goto out_free; + rphy = sas_end_device_alloc(phy->port); + if (!rphy) + goto out_free; child->rphy = rphy; get_device(&rphy->dev); diff --git a/include/linux/libata.h b/include/linux/libata.h index 42378d637ffb..e926df7b54c9 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -996,7 +996,8 @@ extern int ata_sas_scsi_ioctl(struct ata_port *ap, struct scsi_device *dev, extern void ata_sas_port_destroy(struct ata_port *); extern struct ata_port *ata_sas_port_alloc(struct ata_host *, struct ata_port_info *, struct Scsi_Host *); -extern int ata_sas_async_port_init(struct ata_port *); +extern void ata_sas_async_probe(struct ata_port *ap); +extern int ata_sas_sync_probe(struct ata_port *ap); extern int ata_sas_port_init(struct ata_port *); extern int ata_sas_port_start(struct ata_port *ap); extern void ata_sas_port_stop(struct ata_port *ap); diff --git a/include/scsi/sas_ata.h b/include/scsi/sas_ata.h index cdccd2eb7b6c..77670e823ed8 100644 --- a/include/scsi/sas_ata.h +++ b/include/scsi/sas_ata.h @@ -37,7 +37,7 @@ static inline int dev_is_sata(struct domain_device *dev) } int sas_get_ata_info(struct domain_device *dev, struct ex_phy *phy); -int sas_ata_init_host_and_port(struct domain_device *found_dev); +int sas_ata_init(struct domain_device *dev); void sas_ata_task_abort(struct sas_task *task); void sas_ata_strategy_handler(struct Scsi_Host *shost); void sas_ata_eh(struct Scsi_Host *shost, struct list_head *work_q, @@ -52,7 +52,7 @@ static inline int dev_is_sata(struct domain_device *dev) { return 0; } -static inline int sas_ata_init_host_and_port(struct domain_device *found_dev) +static inline int sas_ata_init(struct domain_device *dev) { return 0; } From 7d1d865181185bdf1316d236b1b4bd02c9020729 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 20 Mar 2012 10:50:27 -0700 Subject: [PATCH 093/365] [SCSI] libsas: fix false positive 'device attached' conditions Normalize phy->attached_sas_addr to return a zero-address in the case when device-type == NO_DEVICE or the linkrate is invalid to handle expanders that put non-zero sas addresses in the discovery response: sas: ex 5001b4da000f903f phy02:U:0 attached: 0100000000000000 (no device) sas: ex 5001b4da000f903f phy01:U:0 attached: 0100000000000000 (no device) sas: ex 5001b4da000f903f phy03:U:0 attached: 0100000000000000 (no device) sas: ex 5001b4da000f903f phy00:U:0 attached: 0100000000000000 (no device) Reported-by: Andrzej Jakowski Signed-off-by: Dan Williams Cc: stable@vger.kernel.org Signed-off-by: James Bottomley --- drivers/scsi/libsas/sas_expander.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c index 75247a176c6b..caa0525d2523 100644 --- a/drivers/scsi/libsas/sas_expander.c +++ b/drivers/scsi/libsas/sas_expander.c @@ -245,7 +245,14 @@ static void sas_set_ex_phy(struct domain_device *dev, int phy_id, void *rsp) phy->attached_sata_ps = dr->attached_sata_ps; phy->attached_iproto = dr->iproto << 1; phy->attached_tproto = dr->tproto << 1; - memcpy(phy->attached_sas_addr, dr->attached_sas_addr, SAS_ADDR_SIZE); + /* help some expanders that fail to zero sas_address in the 'no + * device' case + */ + if (phy->attached_dev_type == NO_DEVICE || + phy->linkrate < SAS_LINK_RATE_1_5_GBPS) + memset(phy->attached_sas_addr, 0, SAS_ADDR_SIZE); + else + memcpy(phy->attached_sas_addr, dr->attached_sas_addr, SAS_ADDR_SIZE); phy->attached_phy_id = dr->attached_phy_id; phy->phy_change_count = dr->change_count; phy->routing_attr = dr->routing_attr; From b4698d88585e23d815506f7f38c48192d944b2eb Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 19 Apr 2012 23:48:12 -0700 Subject: [PATCH 094/365] [SCSI] Revert "[SCSI] libsas: fix sas port naming" This reverts commit a692b0eec5efae382dfa800e8b4b083f172921a7. Tom reports: [ 8.741033] ------------[ cut here ]------------ [ 8.741038] WARNING: at fs/sysfs/dir.c:508 sysfs_add_one+0xc1/0xf0() [ 8.741040] Hardware name: To Be Filled By O.E.M. [ 8.741041] sysfs: cannot create duplicate filename ...and missing 2 out of 4 drives connected to mvsas. Commit a692b0ee made the assumption that all the phy ids an lldd registers to libsas are unique. However, in the "multi-chip" case mvsas does a rather annoying duplication of phy ids in the array passed to libsas. So, for example, chip0 has phy0-3 at ha phy index 0-3 and chip1 has its phy0-3 at ha phy index 4-7. The more natural model would be to create a scsi_host (and sas_ha) per chip (controller), but for now revert the naming fix which unfortunately means dealing with unpredictable end-device names for a bit longer. Cc: Xiangliang Yu Cc: Patrick Thomson Reported-by: Tom Rini Tested-by: Tom Rini Signed-off-by: Dan Williams Signed-off-by: James Bottomley --- drivers/scsi/libsas/sas_port.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/scsi/libsas/sas_port.c b/drivers/scsi/libsas/sas_port.c index 1cf7d75ad5eb..e884a8c58a0c 100644 --- a/drivers/scsi/libsas/sas_port.c +++ b/drivers/scsi/libsas/sas_port.c @@ -123,7 +123,7 @@ static void sas_form_port(struct asd_sas_phy *phy) spin_unlock_irqrestore(&sas_ha->phy_port_lock, flags); if (!port->port) { - port->port = sas_port_alloc(phy->phy->dev.parent, phy->id); + port->port = sas_port_alloc(phy->phy->dev.parent, port->id); BUG_ON(!port->port); sas_port_add(port->port); } From 5a218ceba7b64f506bf4f004b04bb457c1805a62 Mon Sep 17 00:00:00 2001 From: Carlos Chinea Date: Wed, 4 Apr 2012 14:11:45 +0300 Subject: [PATCH 095/365] HSI: hsi: Rework hsi_controller release Use the proper release mechanism for hsi_controller and hsi_ports structures. Free the structures through their associated device release callbacks. Signed-off-by: Carlos Chinea Acked-by: Greg Kroah-Hartman Acked-by: Linus Walleij --- drivers/hsi/hsi.c | 108 ++++++++++++++++++++++++---------------- include/linux/hsi/hsi.h | 6 +-- 2 files changed, 69 insertions(+), 45 deletions(-) diff --git a/drivers/hsi/hsi.c b/drivers/hsi/hsi.c index 4e2d79b79334..c17d12ca8e7f 100644 --- a/drivers/hsi/hsi.c +++ b/drivers/hsi/hsi.c @@ -140,12 +140,17 @@ static int hsi_remove_port(struct device *dev, void *data __maybe_unused) return 0; } -static void hsi_controller_release(struct device *dev __maybe_unused) +static void hsi_controller_release(struct device *dev) { + struct hsi_controller *hsi = to_hsi_controller(dev); + + kfree(hsi->port); + kfree(hsi); } -static void hsi_port_release(struct device *dev __maybe_unused) +static void hsi_port_release(struct device *dev) { + kfree(to_hsi_port(dev)); } /** @@ -172,18 +177,14 @@ int hsi_register_controller(struct hsi_controller *hsi) hsi->device.type = &hsi_ctrl; hsi->device.bus = &hsi_bus_type; - hsi->device.release = hsi_controller_release; - err = device_register(&hsi->device); + err = device_add(&hsi->device); if (err < 0) return err; for (i = 0; i < hsi->num_ports; i++) { - hsi->port[i].device.parent = &hsi->device; - hsi->port[i].device.bus = &hsi_bus_type; - hsi->port[i].device.release = hsi_port_release; - hsi->port[i].device.type = &hsi_port; - INIT_LIST_HEAD(&hsi->port[i].clients); - spin_lock_init(&hsi->port[i].clock); - err = device_register(&hsi->port[i].device); + hsi->port[i]->device.parent = &hsi->device; + hsi->port[i]->device.bus = &hsi_bus_type; + hsi->port[i]->device.type = &hsi_port; + err = device_add(&hsi->port[i]->device); if (err < 0) goto out; } @@ -192,7 +193,9 @@ int hsi_register_controller(struct hsi_controller *hsi) return 0; out: - hsi_unregister_controller(hsi); + while (i-- > 0) + device_del(&hsi->port[i]->device); + device_del(&hsi->device); return err; } @@ -222,6 +225,29 @@ static inline int hsi_dummy_cl(struct hsi_client *cl __maybe_unused) return 0; } +/** + * hsi_put_controller - Free an HSI controller + * + * @hsi: Pointer to the HSI controller to freed + * + * HSI controller drivers should only use this function if they need + * to free their allocated hsi_controller structures before a successful + * call to hsi_register_controller. Other use is not allowed. + */ +void hsi_put_controller(struct hsi_controller *hsi) +{ + unsigned int i; + + if (!hsi) + return; + + for (i = 0; i < hsi->num_ports; i++) + if (hsi->port && hsi->port[i]) + put_device(&hsi->port[i]->device); + put_device(&hsi->device); +} +EXPORT_SYMBOL_GPL(hsi_put_controller); + /** * hsi_alloc_controller - Allocate an HSI controller and its ports * @n_ports: Number of ports on the HSI controller @@ -232,54 +258,52 @@ static inline int hsi_dummy_cl(struct hsi_client *cl __maybe_unused) struct hsi_controller *hsi_alloc_controller(unsigned int n_ports, gfp_t flags) { struct hsi_controller *hsi; - struct hsi_port *port; + struct hsi_port **port; unsigned int i; if (!n_ports) return NULL; - port = kzalloc(sizeof(*port)*n_ports, flags); - if (!port) - return NULL; hsi = kzalloc(sizeof(*hsi), flags); if (!hsi) - goto out; - for (i = 0; i < n_ports; i++) { - dev_set_name(&port[i].device, "port%d", i); - port[i].num = i; - port[i].async = hsi_dummy_msg; - port[i].setup = hsi_dummy_cl; - port[i].flush = hsi_dummy_cl; - port[i].start_tx = hsi_dummy_cl; - port[i].stop_tx = hsi_dummy_cl; - port[i].release = hsi_dummy_cl; - mutex_init(&port[i].lock); + return NULL; + port = kzalloc(sizeof(*port)*n_ports, flags); + if (!port) { + kfree(hsi); + return NULL; } hsi->num_ports = n_ports; hsi->port = port; + hsi->device.release = hsi_controller_release; + device_initialize(&hsi->device); + + for (i = 0; i < n_ports; i++) { + port[i] = kzalloc(sizeof(**port), flags); + if (port[i] == NULL) + goto out; + port[i]->num = i; + port[i]->async = hsi_dummy_msg; + port[i]->setup = hsi_dummy_cl; + port[i]->flush = hsi_dummy_cl; + port[i]->start_tx = hsi_dummy_cl; + port[i]->stop_tx = hsi_dummy_cl; + port[i]->release = hsi_dummy_cl; + mutex_init(&port[i]->lock); + INIT_LIST_HEAD(&hsi->port[i]->clients); + spin_lock_init(&hsi->port[i]->clock); + dev_set_name(&port[i]->device, "port%d", i); + hsi->port[i]->device.release = hsi_port_release; + device_initialize(&hsi->port[i]->device); + } return hsi; out: - kfree(port); + hsi_put_controller(hsi); return NULL; } EXPORT_SYMBOL_GPL(hsi_alloc_controller); -/** - * hsi_free_controller - Free an HSI controller - * @hsi: Pointer to HSI controller - */ -void hsi_free_controller(struct hsi_controller *hsi) -{ - if (!hsi) - return; - - kfree(hsi->port); - kfree(hsi); -} -EXPORT_SYMBOL_GPL(hsi_free_controller); - /** * hsi_free_msg - Free an HSI message * @msg: Pointer to the HSI message diff --git a/include/linux/hsi/hsi.h b/include/linux/hsi/hsi.h index 4b178067f405..7f3b7262a2b6 100644 --- a/include/linux/hsi/hsi.h +++ b/include/linux/hsi/hsi.h @@ -270,13 +270,13 @@ struct hsi_controller { struct module *owner; unsigned int id; unsigned int num_ports; - struct hsi_port *port; + struct hsi_port **port; }; #define to_hsi_controller(dev) container_of(dev, struct hsi_controller, device) struct hsi_controller *hsi_alloc_controller(unsigned int n_ports, gfp_t flags); -void hsi_free_controller(struct hsi_controller *hsi); +void hsi_put_controller(struct hsi_controller *hsi); int hsi_register_controller(struct hsi_controller *hsi); void hsi_unregister_controller(struct hsi_controller *hsi); @@ -294,7 +294,7 @@ static inline void *hsi_controller_drvdata(struct hsi_controller *hsi) static inline struct hsi_port *hsi_find_port_num(struct hsi_controller *hsi, unsigned int num) { - return (num < hsi->num_ports) ? &hsi->port[num] : NULL; + return (num < hsi->num_ports) ? hsi->port[num] : NULL; } /* From 90e41f9dc75b47ab94e2191e4c86aa8259699a33 Mon Sep 17 00:00:00 2001 From: Carlos Chinea Date: Wed, 11 Apr 2012 11:01:11 +0300 Subject: [PATCH 096/365] HSI: hsi: Fix error path cleanup on client registration HSI client structure should be freed on error path after calling device_registration by dropping a reference to it. Signed-off-by: Carlos Chinea Acked-by: Greg Kroah-Hartman Acked-by: Linus Walleij --- drivers/hsi/hsi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hsi/hsi.c b/drivers/hsi/hsi.c index c17d12ca8e7f..5c76a36419d4 100644 --- a/drivers/hsi/hsi.c +++ b/drivers/hsi/hsi.c @@ -100,7 +100,7 @@ static void hsi_new_client(struct hsi_port *port, struct hsi_board_info *info) cl->device.archdata = *info->archdata; if (device_register(&cl->device) < 0) { pr_err("hsi: failed to register client: %s\n", info->name); - kfree(cl); + put_device(&cl->device); } } From 6f02b9e9b44a3bfc0046da3ff2707dae0b5e2f30 Mon Sep 17 00:00:00 2001 From: Carlos Chinea Date: Tue, 10 Apr 2012 15:11:24 +0300 Subject: [PATCH 097/365] HSI: hsi: Remove controllers and ports from the bus HSI controllers and ports do not belong to the HSI bus. Those devices are not supposed to have a driver attached to them. Signed-off-by: Carlos Chinea Acked-by: Greg Kroah-Hartman Acked-by: Linus Walleij --- drivers/hsi/hsi.c | 20 +------------------- 1 file changed, 1 insertion(+), 19 deletions(-) diff --git a/drivers/hsi/hsi.c b/drivers/hsi/hsi.c index 5c76a36419d4..cec1f0c04557 100644 --- a/drivers/hsi/hsi.c +++ b/drivers/hsi/hsi.c @@ -29,18 +29,6 @@ #include #include "hsi_core.h" -static struct device_type hsi_ctrl = { - .name = "hsi_controller", -}; - -static struct device_type hsi_cl = { - .name = "hsi_client", -}; - -static struct device_type hsi_port = { - .name = "hsi_port", -}; - static ssize_t modalias_show(struct device *dev, struct device_attribute *a __maybe_unused, char *buf) { @@ -54,8 +42,7 @@ static struct device_attribute hsi_bus_dev_attrs[] = { static int hsi_bus_uevent(struct device *dev, struct kobj_uevent_env *env) { - if (dev->type == &hsi_cl) - add_uevent_var(env, "MODALIAS=hsi:%s", dev_name(dev)); + add_uevent_var(env, "MODALIAS=hsi:%s", dev_name(dev)); return 0; } @@ -85,7 +72,6 @@ static void hsi_new_client(struct hsi_port *port, struct hsi_board_info *info) cl = kzalloc(sizeof(*cl), GFP_KERNEL); if (!cl) return; - cl->device.type = &hsi_cl; cl->tx_cfg = info->tx_cfg; cl->rx_cfg = info->rx_cfg; cl->device.bus = &hsi_bus_type; @@ -175,15 +161,11 @@ int hsi_register_controller(struct hsi_controller *hsi) unsigned int i; int err; - hsi->device.type = &hsi_ctrl; - hsi->device.bus = &hsi_bus_type; err = device_add(&hsi->device); if (err < 0) return err; for (i = 0; i < hsi->num_ports; i++) { hsi->port[i]->device.parent = &hsi->device; - hsi->port[i]->device.bus = &hsi_bus_type; - hsi->port[i]->device.type = &hsi_port; err = device_add(&hsi->port[i]->device); if (err < 0) goto out; From ec1c56ff813a198d656d4aa42e5de03e45751bf8 Mon Sep 17 00:00:00 2001 From: Carlos Chinea Date: Wed, 11 Apr 2012 10:55:53 +0300 Subject: [PATCH 098/365] HSI: hsi: Rework hsi_event interface Remove custom hack and make use of the notifier chain interfaces for delivering events from the ports to their associated clients. Clients that want to receive port events need to register their callbacks using hsi_register_port_event(). The callbacks can be called in interrupt context. Use hsi_unregestier_port_event() to undo the registration. Signed-off-by: Carlos Chinea Acked-by: Greg Kroah-Hartman Acked-by: Linus Walleij --- drivers/hsi/hsi.c | 101 +++++++++++++++++++++------------------- include/linux/hsi/hsi.h | 25 +++++----- 2 files changed, 68 insertions(+), 58 deletions(-) diff --git a/drivers/hsi/hsi.c b/drivers/hsi/hsi.c index cec1f0c04557..2d58f939d27f 100644 --- a/drivers/hsi/hsi.c +++ b/drivers/hsi/hsi.c @@ -21,12 +21,11 @@ */ #include #include -#include #include -#include #include #include #include +#include #include "hsi_core.h" static ssize_t modalias_show(struct device *dev, @@ -67,7 +66,6 @@ static void hsi_client_release(struct device *dev) static void hsi_new_client(struct hsi_port *port, struct hsi_board_info *info) { struct hsi_client *cl; - unsigned long flags; cl = kzalloc(sizeof(*cl), GFP_KERNEL); if (!cl) @@ -79,9 +77,6 @@ static void hsi_new_client(struct hsi_port *port, struct hsi_board_info *info) cl->device.release = hsi_client_release; dev_set_name(&cl->device, info->name); cl->device.platform_data = info->platform_data; - spin_lock_irqsave(&port->clock, flags); - list_add_tail(&cl->link, &port->clients); - spin_unlock_irqrestore(&port->clock, flags); if (info->archdata) cl->device.archdata = *info->archdata; if (device_register(&cl->device) < 0) { @@ -106,13 +101,6 @@ static void hsi_scan_board_info(struct hsi_controller *hsi) static int hsi_remove_client(struct device *dev, void *data __maybe_unused) { - struct hsi_client *cl = to_hsi_client(dev); - struct hsi_port *port = to_hsi_port(dev->parent); - unsigned long flags; - - spin_lock_irqsave(&port->clock, flags); - list_del(&cl->link); - spin_unlock_irqrestore(&port->clock, flags); device_unregister(dev); return 0; @@ -271,8 +259,7 @@ struct hsi_controller *hsi_alloc_controller(unsigned int n_ports, gfp_t flags) port[i]->stop_tx = hsi_dummy_cl; port[i]->release = hsi_dummy_cl; mutex_init(&port[i]->lock); - INIT_LIST_HEAD(&hsi->port[i]->clients); - spin_lock_init(&hsi->port[i]->clock); + ATOMIC_INIT_NOTIFIER_HEAD(&port[i]->n_head); dev_set_name(&port[i]->device, "port%d", i); hsi->port[i]->device.release = hsi_port_release; device_initialize(&hsi->port[i]->device); @@ -420,37 +407,67 @@ void hsi_release_port(struct hsi_client *cl) } EXPORT_SYMBOL_GPL(hsi_release_port); -static int hsi_start_rx(struct hsi_client *cl, void *data __maybe_unused) +static int hsi_event_notifier_call(struct notifier_block *nb, + unsigned long event, void *data __maybe_unused) { - if (cl->hsi_start_rx) - (*cl->hsi_start_rx)(cl); + struct hsi_client *cl = container_of(nb, struct hsi_client, nb); + + (*cl->ehandler)(cl, event); return 0; } -static int hsi_stop_rx(struct hsi_client *cl, void *data __maybe_unused) +/** + * hsi_register_port_event - Register a client to receive port events + * @cl: HSI client that wants to receive port events + * @cb: Event handler callback + * + * Clients should register a callback to be able to receive + * events from the ports. Registration should happen after + * claiming the port. + * The handler can be called in interrupt context. + * + * Returns -errno on error, or 0 on success. + */ +int hsi_register_port_event(struct hsi_client *cl, + void (*handler)(struct hsi_client *, unsigned long)) { - if (cl->hsi_stop_rx) - (*cl->hsi_stop_rx)(cl); + struct hsi_port *port = hsi_get_port(cl); - return 0; + if (!handler || cl->ehandler) + return -EINVAL; + if (!hsi_port_claimed(cl)) + return -EACCES; + cl->ehandler = handler; + cl->nb.notifier_call = hsi_event_notifier_call; + + return atomic_notifier_chain_register(&port->n_head, &cl->nb); } +EXPORT_SYMBOL_GPL(hsi_register_port_event); -static int hsi_port_for_each_client(struct hsi_port *port, void *data, - int (*fn)(struct hsi_client *cl, void *data)) +/** + * hsi_unregister_port_event - Stop receiving port events for a client + * @cl: HSI client that wants to stop receiving port events + * + * Clients should call this function before releasing their associated + * port. + * + * Returns -errno on error, or 0 on success. + */ +int hsi_unregister_port_event(struct hsi_client *cl) { - struct hsi_client *cl; + struct hsi_port *port = hsi_get_port(cl); + int err; - spin_lock(&port->clock); - list_for_each_entry(cl, &port->clients, link) { - spin_unlock(&port->clock); - (*fn)(cl, data); - spin_lock(&port->clock); - } - spin_unlock(&port->clock); + WARN_ON(!hsi_port_claimed(cl)); - return 0; + err = atomic_notifier_chain_unregister(&port->n_head, &cl->nb); + if (!err) + cl->ehandler = NULL; + + return err; } +EXPORT_SYMBOL_GPL(hsi_unregister_port_event); /** * hsi_event -Notifies clients about port events @@ -464,22 +481,12 @@ static int hsi_port_for_each_client(struct hsi_port *port, void *data, * Events: * HSI_EVENT_START_RX - Incoming wake line high * HSI_EVENT_STOP_RX - Incoming wake line down + * + * Returns -errno on error, or 0 on success. */ -void hsi_event(struct hsi_port *port, unsigned int event) +int hsi_event(struct hsi_port *port, unsigned long event) { - int (*fn)(struct hsi_client *cl, void *data); - - switch (event) { - case HSI_EVENT_START_RX: - fn = hsi_start_rx; - break; - case HSI_EVENT_STOP_RX: - fn = hsi_stop_rx; - break; - default: - return; - } - hsi_port_for_each_client(port, NULL, fn); + return atomic_notifier_call_chain(&port->n_head, event, NULL); } EXPORT_SYMBOL_GPL(hsi_event); diff --git a/include/linux/hsi/hsi.h b/include/linux/hsi/hsi.h index 7f3b7262a2b6..56fae865e272 100644 --- a/include/linux/hsi/hsi.h +++ b/include/linux/hsi/hsi.h @@ -26,9 +26,9 @@ #include #include #include -#include #include #include +#include /* HSI message ttype */ #define HSI_MSG_READ 0 @@ -121,18 +121,18 @@ static inline int hsi_register_board_info(struct hsi_board_info const *info, * @device: Driver model representation of the device * @tx_cfg: HSI TX configuration * @rx_cfg: HSI RX configuration - * @hsi_start_rx: Called after incoming wake line goes high - * @hsi_stop_rx: Called after incoming wake line goes low + * @e_handler: Callback for handling port events (RX Wake High/Low) + * @pclaimed: Keeps tracks if the clients claimed its associated HSI port + * @nb: Notifier block for port events */ struct hsi_client { struct device device; struct hsi_config tx_cfg; struct hsi_config rx_cfg; - void (*hsi_start_rx)(struct hsi_client *cl); - void (*hsi_stop_rx)(struct hsi_client *cl); /* private: */ + void (*ehandler)(struct hsi_client *, unsigned long); unsigned int pclaimed:1; - struct list_head link; + struct notifier_block nb; }; #define to_hsi_client(dev) container_of(dev, struct hsi_client, device) @@ -147,6 +147,10 @@ static inline void *hsi_client_drvdata(struct hsi_client *cl) return dev_get_drvdata(&cl->device); } +int hsi_register_port_event(struct hsi_client *cl, + void (*handler)(struct hsi_client *, unsigned long)); +int hsi_unregister_port_event(struct hsi_client *cl); + /** * struct hsi_client_driver - Driver associated to an HSI client * @driver: Driver model representation of the driver @@ -214,8 +218,7 @@ void hsi_free_msg(struct hsi_msg *msg); * @start_tx: Callback to inform that a client wants to TX data * @stop_tx: Callback to inform that a client no longer wishes to TX data * @release: Callback to inform that a client no longer uses the port - * @clients: List of hsi_clients using the port. - * @clock: Lock to serialize access to the clients list. + * @n_head: Notifier chain for signaling port events to the clients. */ struct hsi_port { struct device device; @@ -231,14 +234,14 @@ struct hsi_port { int (*start_tx)(struct hsi_client *cl); int (*stop_tx)(struct hsi_client *cl); int (*release)(struct hsi_client *cl); - struct list_head clients; - spinlock_t clock; + /* private */ + struct atomic_notifier_head n_head; }; #define to_hsi_port(dev) container_of(dev, struct hsi_port, device) #define hsi_get_port(cl) to_hsi_port((cl)->device.parent) -void hsi_event(struct hsi_port *port, unsigned int event); +int hsi_event(struct hsi_port *port, unsigned long event); int hsi_claim_port(struct hsi_client *cl, unsigned int share); void hsi_release_port(struct hsi_client *cl); From fdadb6e9a5cf65c7662b2ca817856f187d05ab7d Mon Sep 17 00:00:00 2001 From: Carlos Chinea Date: Fri, 13 Apr 2012 16:03:03 +0300 Subject: [PATCH 099/365] HSI: hsi_char: Remove max_data_size from sysfs Remove max_data_size sysfs entry. Otherwise is possible to have a buffer overrun if its value is increased after the device is open. Signed-off-by: Carlos Chinea Acked-by: Greg Kroah-Hartman Acked-by: Linus Walleij --- drivers/hsi/clients/hsi_char.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hsi/clients/hsi_char.c b/drivers/hsi/clients/hsi_char.c index 88a050df2389..3ad91f6447d8 100644 --- a/drivers/hsi/clients/hsi_char.c +++ b/drivers/hsi/clients/hsi_char.c @@ -123,7 +123,7 @@ struct hsc_client_data { static unsigned int hsc_major; /* Maximum buffer size that hsi_char will accept from userspace */ static unsigned int max_data_size = 0x1000; -module_param(max_data_size, uint, S_IRUSR | S_IWUSR); +module_param(max_data_size, uint, 0); MODULE_PARM_DESC(max_data_size, "max read/write data size [4,8..65536] (^2)"); static void hsc_add_tail(struct hsc_channel *channel, struct hsi_msg *msg, From 24b7099af71232b7568acd74770e6eb8f174f5d6 Mon Sep 17 00:00:00 2001 From: Carlos Chinea Date: Fri, 13 Apr 2012 15:55:13 +0300 Subject: [PATCH 100/365] HSI: Add HSI ABI documentation Adds sysfs HSI framework documentation Signed-off-by: Carlos Chinea Acked-by: Greg Kroah-Hartman Acked-by: Linus Walleij --- Documentation/ABI/testing/sysfs-bus-hsi | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) create mode 100644 Documentation/ABI/testing/sysfs-bus-hsi diff --git a/Documentation/ABI/testing/sysfs-bus-hsi b/Documentation/ABI/testing/sysfs-bus-hsi new file mode 100644 index 000000000000..1b1b282a99e1 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-hsi @@ -0,0 +1,19 @@ +What: /sys/bus/hsi +Date: April 2012 +KernelVersion: 3.4 +Contact: Carlos Chinea +Description: + High Speed Synchronous Serial Interface (HSI) is a + serial interface mainly used for connecting application + engines (APE) with cellular modem engines (CMT) in cellular + handsets. + The bus will be populated with devices (hsi_clients) representing + the protocols available in the system. Bus drivers implement + those protocols. + +What: /sys/bus/hsi/devices/.../modalias +Date: April 2012 +KernelVersion: 3.4 +Contact: Carlos Chinea +Description: Stores the same MODALIAS value emitted by uevent + Format: hsi: From 887ea3db26ec8a43b650ada273e1159492939c10 Mon Sep 17 00:00:00 2001 From: Inki Dae Date: Mon, 23 Apr 2012 19:36:39 +0900 Subject: [PATCH 101/365] drm/exynos: fixed duplicatd memory allocation bug. the gem was already allocated at gem allocation time but is allocated at page fault handler so this patch fixes the problem that gem was allocated one more time. Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park --- drivers/gpu/drm/exynos/exynos_drm_gem.c | 12 ------------ 1 file changed, 12 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_gem.c b/drivers/gpu/drm/exynos/exynos_drm_gem.c index 26d51979116b..b1850c30e043 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_gem.c +++ b/drivers/gpu/drm/exynos/exynos_drm_gem.c @@ -712,7 +712,6 @@ int exynos_drm_gem_dumb_destroy(struct drm_file *file_priv, int exynos_drm_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf) { struct drm_gem_object *obj = vma->vm_private_data; - struct exynos_drm_gem_obj *exynos_gem_obj = to_exynos_gem_obj(obj); struct drm_device *dev = obj->dev; unsigned long f_vaddr; pgoff_t page_offset; @@ -724,21 +723,10 @@ int exynos_drm_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf) mutex_lock(&dev->struct_mutex); - /* - * allocate all pages as desired size if user wants to allocate - * physically non-continuous memory. - */ - if (exynos_gem_obj->flags & EXYNOS_BO_NONCONTIG) { - ret = exynos_drm_gem_get_pages(obj); - if (ret < 0) - goto err; - } - ret = exynos_drm_gem_map_pages(obj, vma, f_vaddr, page_offset); if (ret < 0) DRM_ERROR("failed to map pages.\n"); -err: mutex_unlock(&dev->struct_mutex); return convert_to_vm_err_msg(ret); From f6ead8dea518d0d02c576432eba4fa145e64b02a Mon Sep 17 00:00:00 2001 From: Inki Dae Date: Mon, 23 Apr 2012 19:41:14 +0900 Subject: [PATCH 102/365] drm/exynos: fixed exynos_drm_gem_map_pages bug. this patch fixes the problem that the physical memory region to be mapped to user space could be exceeded. if page fault address was placed at between buffer start and end then memory region to be mapped would be exceeded. Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park --- drivers/gpu/drm/exynos/exynos_drm_gem.c | 16 +++------------- 1 file changed, 3 insertions(+), 13 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_gem.c b/drivers/gpu/drm/exynos/exynos_drm_gem.c index b1850c30e043..f09d292a2e37 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_gem.c +++ b/drivers/gpu/drm/exynos/exynos_drm_gem.c @@ -149,22 +149,12 @@ static int exynos_drm_gem_map_pages(struct drm_gem_object *obj, unsigned long pfn; if (exynos_gem_obj->flags & EXYNOS_BO_NONCONTIG) { - unsigned long usize = buf->size; - if (!buf->pages) return -EINTR; - while (usize > 0) { - pfn = page_to_pfn(buf->pages[page_offset++]); - vm_insert_mixed(vma, f_vaddr, pfn); - f_vaddr += PAGE_SIZE; - usize -= PAGE_SIZE; - } - - return 0; - } - - pfn = (buf->dma_addr >> PAGE_SHIFT) + page_offset; + pfn = page_to_pfn(buf->pages[page_offset++]); + } else + pfn = (buf->dma_addr >> PAGE_SHIFT) + page_offset; return vm_insert_mixed(vma, f_vaddr, pfn); } From 818c4ea7c589c521912430ea54e0c0a0671b2c6d Mon Sep 17 00:00:00 2001 From: Inki Dae Date: Mon, 23 Apr 2012 19:47:18 +0900 Subject: [PATCH 103/365] drm/exynos: added missed vm area region mapping type. with this patch, if the memory region is physically non-continuous then VM_MIXEDMAP is set to vm->vm_flags otherwise VM_PFNMAP. we had missed this flag setting. Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park --- drivers/gpu/drm/exynos/exynos_drm_gem.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/exynos/exynos_drm_gem.c b/drivers/gpu/drm/exynos/exynos_drm_gem.c index f09d292a2e37..01139c813953 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_gem.c +++ b/drivers/gpu/drm/exynos/exynos_drm_gem.c @@ -514,6 +514,8 @@ static int exynos_drm_gem_mmap_buffer(struct file *filp, if (!buffer->pages) return -EINVAL; + vma->vm_flags |= VM_MIXEDMAP; + do { ret = vm_insert_page(vma, uaddr, buffer->pages[i++]); if (ret) { From 1a38336b8611a04f0a624330c1f815421f4bf5f4 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 12 Apr 2012 19:47:11 +0100 Subject: [PATCH 104/365] ASoC: wm8994: Improve sequencing of AIF channel enables This ensures a clean startup of the channels, without this change some use cases could result in issues in a small proportion of cases. Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/codecs/wm8994.c | 278 ++++++++++++++++++++++++++++++-------- 1 file changed, 223 insertions(+), 55 deletions(-) diff --git a/sound/soc/codecs/wm8994.c b/sound/soc/codecs/wm8994.c index 7c49642af052..6c1fe3afd4b5 100644 --- a/sound/soc/codecs/wm8994.c +++ b/sound/soc/codecs/wm8994.c @@ -1000,6 +1000,204 @@ static void wm8994_update_class_w(struct snd_soc_codec *codec) } } +static int aif1clk_ev(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_codec *codec = w->codec; + struct wm8994 *control = codec->control_data; + int mask = WM8994_AIF1DAC1L_ENA | WM8994_AIF1DAC1R_ENA; + int dac; + int adc; + int val; + + switch (control->type) { + case WM8994: + case WM8958: + mask |= WM8994_AIF1DAC2L_ENA | WM8994_AIF1DAC2R_ENA; + break; + default: + break; + } + + switch (event) { + case SND_SOC_DAPM_PRE_PMU: + val = snd_soc_read(codec, WM8994_AIF1_CONTROL_1); + if ((val & WM8994_AIF1ADCL_SRC) && + (val & WM8994_AIF1ADCR_SRC)) + adc = WM8994_AIF1ADC1R_ENA | WM8994_AIF1ADC2R_ENA; + else if (!(val & WM8994_AIF1ADCL_SRC) && + !(val & WM8994_AIF1ADCR_SRC)) + adc = WM8994_AIF1ADC1L_ENA | WM8994_AIF1ADC2L_ENA; + else + adc = WM8994_AIF1ADC1R_ENA | WM8994_AIF1ADC2R_ENA | + WM8994_AIF1ADC1L_ENA | WM8994_AIF1ADC2L_ENA; + + val = snd_soc_read(codec, WM8994_AIF1_CONTROL_2); + if ((val & WM8994_AIF1DACL_SRC) && + (val & WM8994_AIF1DACR_SRC)) + dac = WM8994_AIF1DAC1R_ENA | WM8994_AIF1DAC2R_ENA; + else if (!(val & WM8994_AIF1DACL_SRC) && + !(val & WM8994_AIF1DACR_SRC)) + dac = WM8994_AIF1DAC1L_ENA | WM8994_AIF1DAC2L_ENA; + else + dac = WM8994_AIF1DAC1R_ENA | WM8994_AIF1DAC2R_ENA | + WM8994_AIF1DAC1L_ENA | WM8994_AIF1DAC2L_ENA; + + snd_soc_update_bits(codec, WM8994_POWER_MANAGEMENT_4, + mask, adc); + snd_soc_update_bits(codec, WM8994_POWER_MANAGEMENT_5, + mask, dac); + snd_soc_update_bits(codec, WM8994_CLOCKING_1, + WM8994_AIF1DSPCLK_ENA | + WM8994_SYSDSPCLK_ENA, + WM8994_AIF1DSPCLK_ENA | + WM8994_SYSDSPCLK_ENA); + snd_soc_update_bits(codec, WM8994_POWER_MANAGEMENT_4, mask, + WM8994_AIF1ADC1R_ENA | + WM8994_AIF1ADC1L_ENA | + WM8994_AIF1ADC2R_ENA | + WM8994_AIF1ADC2L_ENA); + snd_soc_update_bits(codec, WM8994_POWER_MANAGEMENT_5, mask, + WM8994_AIF1DAC1R_ENA | + WM8994_AIF1DAC1L_ENA | + WM8994_AIF1DAC2R_ENA | + WM8994_AIF1DAC2L_ENA); + break; + + case SND_SOC_DAPM_PRE_PMD: + case SND_SOC_DAPM_POST_PMD: + snd_soc_update_bits(codec, WM8994_POWER_MANAGEMENT_5, + mask, 0); + snd_soc_update_bits(codec, WM8994_POWER_MANAGEMENT_4, + mask, 0); + + val = snd_soc_read(codec, WM8994_CLOCKING_1); + if (val & WM8994_AIF2DSPCLK_ENA) + val = WM8994_SYSDSPCLK_ENA; + else + val = 0; + snd_soc_update_bits(codec, WM8994_CLOCKING_1, + WM8994_SYSDSPCLK_ENA | + WM8994_AIF1DSPCLK_ENA, val); + break; + } + + return 0; +} + +static int aif2clk_ev(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_codec *codec = w->codec; + int dac; + int adc; + int val; + + switch (event) { + case SND_SOC_DAPM_PRE_PMU: + val = snd_soc_read(codec, WM8994_AIF2_CONTROL_1); + if ((val & WM8994_AIF2ADCL_SRC) && + (val & WM8994_AIF2ADCR_SRC)) + adc = WM8994_AIF2ADCR_ENA; + else if (!(val & WM8994_AIF2ADCL_SRC) && + !(val & WM8994_AIF2ADCR_SRC)) + adc = WM8994_AIF2ADCL_ENA; + else + adc = WM8994_AIF2ADCL_ENA | WM8994_AIF2ADCR_ENA; + + + val = snd_soc_read(codec, WM8994_AIF2_CONTROL_2); + if ((val & WM8994_AIF2DACL_SRC) && + (val & WM8994_AIF2DACR_SRC)) + dac = WM8994_AIF2DACR_ENA; + else if (!(val & WM8994_AIF2DACL_SRC) && + !(val & WM8994_AIF2DACR_SRC)) + dac = WM8994_AIF2DACL_ENA; + else + dac = WM8994_AIF2DACL_ENA | WM8994_AIF2DACR_ENA; + + snd_soc_update_bits(codec, WM8994_POWER_MANAGEMENT_4, + WM8994_AIF2ADCL_ENA | + WM8994_AIF2ADCR_ENA, adc); + snd_soc_update_bits(codec, WM8994_POWER_MANAGEMENT_5, + WM8994_AIF2DACL_ENA | + WM8994_AIF2DACR_ENA, dac); + snd_soc_update_bits(codec, WM8994_CLOCKING_1, + WM8994_AIF2DSPCLK_ENA | + WM8994_SYSDSPCLK_ENA, + WM8994_AIF2DSPCLK_ENA | + WM8994_SYSDSPCLK_ENA); + snd_soc_update_bits(codec, WM8994_POWER_MANAGEMENT_4, + WM8994_AIF2ADCL_ENA | + WM8994_AIF2ADCR_ENA, + WM8994_AIF2ADCL_ENA | + WM8994_AIF2ADCR_ENA); + snd_soc_update_bits(codec, WM8994_POWER_MANAGEMENT_5, + WM8994_AIF2DACL_ENA | + WM8994_AIF2DACR_ENA, + WM8994_AIF2DACL_ENA | + WM8994_AIF2DACR_ENA); + break; + + case SND_SOC_DAPM_PRE_PMD: + case SND_SOC_DAPM_POST_PMD: + snd_soc_update_bits(codec, WM8994_POWER_MANAGEMENT_5, + WM8994_AIF2DACL_ENA | + WM8994_AIF2DACR_ENA, 0); + snd_soc_update_bits(codec, WM8994_POWER_MANAGEMENT_5, + WM8994_AIF2ADCL_ENA | + WM8994_AIF2ADCR_ENA, 0); + + val = snd_soc_read(codec, WM8994_CLOCKING_1); + if (val & WM8994_AIF1DSPCLK_ENA) + val = WM8994_SYSDSPCLK_ENA; + else + val = 0; + snd_soc_update_bits(codec, WM8994_CLOCKING_1, + WM8994_SYSDSPCLK_ENA | + WM8994_AIF2DSPCLK_ENA, val); + break; + } + + return 0; +} + +static int aif1clk_late_ev(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_codec *codec = w->codec; + struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec); + + switch (event) { + case SND_SOC_DAPM_PRE_PMU: + wm8994->aif1clk_enable = 1; + break; + case SND_SOC_DAPM_POST_PMD: + wm8994->aif1clk_disable = 1; + break; + } + + return 0; +} + +static int aif2clk_late_ev(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_codec *codec = w->codec; + struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec); + + switch (event) { + case SND_SOC_DAPM_PRE_PMU: + wm8994->aif2clk_enable = 1; + break; + case SND_SOC_DAPM_POST_PMD: + wm8994->aif2clk_disable = 1; + break; + } + + return 0; +} + static int late_enable_ev(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { @@ -1009,12 +1207,14 @@ static int late_enable_ev(struct snd_soc_dapm_widget *w, switch (event) { case SND_SOC_DAPM_PRE_PMU: if (wm8994->aif1clk_enable) { + aif1clk_ev(w, kcontrol, event); snd_soc_update_bits(codec, WM8994_AIF1_CLOCKING_1, WM8994_AIF1CLK_ENA_MASK, WM8994_AIF1CLK_ENA); wm8994->aif1clk_enable = 0; } if (wm8994->aif2clk_enable) { + aif2clk_ev(w, kcontrol, event); snd_soc_update_bits(codec, WM8994_AIF2_CLOCKING_1, WM8994_AIF2CLK_ENA_MASK, WM8994_AIF2CLK_ENA); @@ -1040,11 +1240,13 @@ static int late_disable_ev(struct snd_soc_dapm_widget *w, if (wm8994->aif1clk_disable) { snd_soc_update_bits(codec, WM8994_AIF1_CLOCKING_1, WM8994_AIF1CLK_ENA_MASK, 0); + aif1clk_ev(w, kcontrol, event); wm8994->aif1clk_disable = 0; } if (wm8994->aif2clk_disable) { snd_soc_update_bits(codec, WM8994_AIF2_CLOCKING_1, WM8994_AIF2CLK_ENA_MASK, 0); + aif2clk_ev(w, kcontrol, event); wm8994->aif2clk_disable = 0; } break; @@ -1053,42 +1255,6 @@ static int late_disable_ev(struct snd_soc_dapm_widget *w, return 0; } -static int aif1clk_ev(struct snd_soc_dapm_widget *w, - struct snd_kcontrol *kcontrol, int event) -{ - struct snd_soc_codec *codec = w->codec; - struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec); - - switch (event) { - case SND_SOC_DAPM_PRE_PMU: - wm8994->aif1clk_enable = 1; - break; - case SND_SOC_DAPM_POST_PMD: - wm8994->aif1clk_disable = 1; - break; - } - - return 0; -} - -static int aif2clk_ev(struct snd_soc_dapm_widget *w, - struct snd_kcontrol *kcontrol, int event) -{ - struct snd_soc_codec *codec = w->codec; - struct wm8994_priv *wm8994 = snd_soc_codec_get_drvdata(codec); - - switch (event) { - case SND_SOC_DAPM_PRE_PMU: - wm8994->aif2clk_enable = 1; - break; - case SND_SOC_DAPM_POST_PMD: - wm8994->aif2clk_disable = 1; - break; - } - - return 0; -} - static int adc_mux_ev(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { @@ -1385,9 +1551,9 @@ static const struct snd_kcontrol_new aif2dacr_src_mux = SOC_DAPM_ENUM("AIF2DACR Mux", aif2dacr_src_enum); static const struct snd_soc_dapm_widget wm8994_lateclk_revd_widgets[] = { -SND_SOC_DAPM_SUPPLY("AIF1CLK", SND_SOC_NOPM, 0, 0, aif1clk_ev, +SND_SOC_DAPM_SUPPLY("AIF1CLK", SND_SOC_NOPM, 0, 0, aif1clk_late_ev, SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD), -SND_SOC_DAPM_SUPPLY("AIF2CLK", SND_SOC_NOPM, 0, 0, aif2clk_ev, +SND_SOC_DAPM_SUPPLY("AIF2CLK", SND_SOC_NOPM, 0, 0, aif2clk_late_ev, SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD), SND_SOC_DAPM_PGA_E("Late DAC1L Enable PGA", SND_SOC_NOPM, 0, 0, NULL, 0, @@ -1416,8 +1582,10 @@ SND_SOC_DAPM_POST("Late Disable PGA", late_disable_ev) }; static const struct snd_soc_dapm_widget wm8994_lateclk_widgets[] = { -SND_SOC_DAPM_SUPPLY("AIF1CLK", WM8994_AIF1_CLOCKING_1, 0, 0, NULL, 0), -SND_SOC_DAPM_SUPPLY("AIF2CLK", WM8994_AIF2_CLOCKING_1, 0, 0, NULL, 0), +SND_SOC_DAPM_SUPPLY("AIF1CLK", WM8994_AIF1_CLOCKING_1, 0, 0, aif1clk_ev, + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD), +SND_SOC_DAPM_SUPPLY("AIF2CLK", WM8994_AIF2_CLOCKING_1, 0, 0, aif2clk_ev, + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_PRE_PMD), SND_SOC_DAPM_PGA("Direct Voice", SND_SOC_NOPM, 0, 0, NULL, 0), SND_SOC_DAPM_MIXER("SPKL", WM8994_POWER_MANAGEMENT_3, 8, 0, left_speaker_mixer, ARRAY_SIZE(left_speaker_mixer)), @@ -1470,30 +1638,30 @@ SND_SOC_DAPM_SUPPLY("VMID", SND_SOC_NOPM, 0, 0, vmid_event, SND_SOC_DAPM_SUPPLY("CLK_SYS", SND_SOC_NOPM, 0, 0, clk_sys_event, SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), -SND_SOC_DAPM_SUPPLY("DSP1CLK", WM8994_CLOCKING_1, 3, 0, NULL, 0), -SND_SOC_DAPM_SUPPLY("DSP2CLK", WM8994_CLOCKING_1, 2, 0, NULL, 0), -SND_SOC_DAPM_SUPPLY("DSPINTCLK", WM8994_CLOCKING_1, 1, 0, NULL, 0), +SND_SOC_DAPM_SUPPLY("DSP1CLK", SND_SOC_NOPM, 3, 0, NULL, 0), +SND_SOC_DAPM_SUPPLY("DSP2CLK", SND_SOC_NOPM, 2, 0, NULL, 0), +SND_SOC_DAPM_SUPPLY("DSPINTCLK", SND_SOC_NOPM, 1, 0, NULL, 0), SND_SOC_DAPM_AIF_OUT("AIF1ADC1L", NULL, - 0, WM8994_POWER_MANAGEMENT_4, 9, 0), + 0, SND_SOC_NOPM, 9, 0), SND_SOC_DAPM_AIF_OUT("AIF1ADC1R", NULL, - 0, WM8994_POWER_MANAGEMENT_4, 8, 0), + 0, SND_SOC_NOPM, 8, 0), SND_SOC_DAPM_AIF_IN_E("AIF1DAC1L", NULL, 0, - WM8994_POWER_MANAGEMENT_5, 9, 0, wm8958_aif_ev, + SND_SOC_NOPM, 9, 0, wm8958_aif_ev, SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD), SND_SOC_DAPM_AIF_IN_E("AIF1DAC1R", NULL, 0, - WM8994_POWER_MANAGEMENT_5, 8, 0, wm8958_aif_ev, + SND_SOC_NOPM, 8, 0, wm8958_aif_ev, SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD), SND_SOC_DAPM_AIF_OUT("AIF1ADC2L", NULL, - 0, WM8994_POWER_MANAGEMENT_4, 11, 0), + 0, SND_SOC_NOPM, 11, 0), SND_SOC_DAPM_AIF_OUT("AIF1ADC2R", NULL, - 0, WM8994_POWER_MANAGEMENT_4, 10, 0), + 0, SND_SOC_NOPM, 10, 0), SND_SOC_DAPM_AIF_IN_E("AIF1DAC2L", NULL, 0, - WM8994_POWER_MANAGEMENT_5, 11, 0, wm8958_aif_ev, + SND_SOC_NOPM, 11, 0, wm8958_aif_ev, SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD), SND_SOC_DAPM_AIF_IN_E("AIF1DAC2R", NULL, 0, - WM8994_POWER_MANAGEMENT_5, 10, 0, wm8958_aif_ev, + SND_SOC_NOPM, 10, 0, wm8958_aif_ev, SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD), SND_SOC_DAPM_MIXER("AIF1ADC1L Mixer", SND_SOC_NOPM, 0, 0, @@ -1520,14 +1688,14 @@ SND_SOC_DAPM_MIXER("DAC1R Mixer", SND_SOC_NOPM, 0, 0, dac1r_mix, ARRAY_SIZE(dac1r_mix)), SND_SOC_DAPM_AIF_OUT("AIF2ADCL", NULL, 0, - WM8994_POWER_MANAGEMENT_4, 13, 0), + SND_SOC_NOPM, 13, 0), SND_SOC_DAPM_AIF_OUT("AIF2ADCR", NULL, 0, - WM8994_POWER_MANAGEMENT_4, 12, 0), + SND_SOC_NOPM, 12, 0), SND_SOC_DAPM_AIF_IN_E("AIF2DACL", NULL, 0, - WM8994_POWER_MANAGEMENT_5, 13, 0, wm8958_aif_ev, + SND_SOC_NOPM, 13, 0, wm8958_aif_ev, SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), SND_SOC_DAPM_AIF_IN_E("AIF2DACR", NULL, 0, - WM8994_POWER_MANAGEMENT_5, 12, 0, wm8958_aif_ev, + SND_SOC_NOPM, 12, 0, wm8958_aif_ev, SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD), SND_SOC_DAPM_AIF_IN("AIF1DACDAT", NULL, 0, SND_SOC_NOPM, 0, 0), From 1bdae6f49c52af3a58998cdb051dbd5b942f9273 Mon Sep 17 00:00:00 2001 From: Narayanan G Date: Thu, 9 Feb 2012 12:41:37 +0530 Subject: [PATCH 105/365] dma40: Improve the logic of stopping logical chan can be directly stopped by issuing a SUSPEND_REQ on the EE bits. There is no need to suspend the physical channel and restart it. Also, the support for pre-V2 hw is discontinued. EE bits for writing: 00: disable only if AS=11 or AS=00 01: enable 10: suspend_req only if AS=01 & EE=01 or EE=11 11: round / no change for writing Signed-off-by: Narayanan G Acked-by: Linus Walleij Signed-off-by: Vinod Koul --- drivers/dma/ste_dma40.c | 326 +++++++++++++++++++++++-------------- drivers/dma/ste_dma40_ll.h | 2 - 2 files changed, 202 insertions(+), 126 deletions(-) diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c index bdd41d4bfa8d..c5f26cc2c277 100644 --- a/drivers/dma/ste_dma40.c +++ b/drivers/dma/ste_dma40.c @@ -68,6 +68,22 @@ enum d40_command { D40_DMA_SUSPENDED = 3 }; +/* + * enum d40_events - The different Event Enables for the event lines. + * + * @D40_DEACTIVATE_EVENTLINE: De-activate Event line, stopping the logical chan. + * @D40_ACTIVATE_EVENTLINE: Activate the Event line, to start a logical chan. + * @D40_SUSPEND_REQ_EVENTLINE: Requesting for suspending a event line. + * @D40_ROUND_EVENTLINE: Status check for event line. + */ + +enum d40_events { + D40_DEACTIVATE_EVENTLINE = 0, + D40_ACTIVATE_EVENTLINE = 1, + D40_SUSPEND_REQ_EVENTLINE = 2, + D40_ROUND_EVENTLINE = 3 +}; + /* * These are the registers that has to be saved and later restored * when the DMA hw is powered off. @@ -870,8 +886,8 @@ static void d40_save_restore_registers(struct d40_base *base, bool save) } #endif -static int d40_channel_execute_command(struct d40_chan *d40c, - enum d40_command command) +static int __d40_execute_command_phy(struct d40_chan *d40c, + enum d40_command command) { u32 status; int i; @@ -880,6 +896,12 @@ static int d40_channel_execute_command(struct d40_chan *d40c, unsigned long flags; u32 wmask; + if (command == D40_DMA_STOP) { + ret = __d40_execute_command_phy(d40c, D40_DMA_SUSPEND_REQ); + if (ret) + return ret; + } + spin_lock_irqsave(&d40c->base->execmd_lock, flags); if (d40c->phy_chan->num % 2 == 0) @@ -973,67 +995,109 @@ static void d40_term_all(struct d40_chan *d40c) } d40c->pending_tx = 0; - d40c->busy = false; } -static void __d40_config_set_event(struct d40_chan *d40c, bool enable, - u32 event, int reg) +static void __d40_config_set_event(struct d40_chan *d40c, + enum d40_events event_type, u32 event, + int reg) { void __iomem *addr = chan_base(d40c) + reg; int tries; + u32 status; + + switch (event_type) { + + case D40_DEACTIVATE_EVENTLINE: - if (!enable) { writel((D40_DEACTIVATE_EVENTLINE << D40_EVENTLINE_POS(event)) | ~D40_EVENTLINE_MASK(event), addr); - return; - } + break; + case D40_SUSPEND_REQ_EVENTLINE: + status = (readl(addr) & D40_EVENTLINE_MASK(event)) >> + D40_EVENTLINE_POS(event); + + if (status == D40_DEACTIVATE_EVENTLINE || + status == D40_SUSPEND_REQ_EVENTLINE) + break; + + writel((D40_SUSPEND_REQ_EVENTLINE << D40_EVENTLINE_POS(event)) + | ~D40_EVENTLINE_MASK(event), addr); + + for (tries = 0 ; tries < D40_SUSPEND_MAX_IT; tries++) { + + status = (readl(addr) & D40_EVENTLINE_MASK(event)) >> + D40_EVENTLINE_POS(event); + + cpu_relax(); + /* + * Reduce the number of bus accesses while + * waiting for the DMA to suspend. + */ + udelay(3); + + if (status == D40_DEACTIVATE_EVENTLINE) + break; + } + + if (tries == D40_SUSPEND_MAX_IT) { + chan_err(d40c, + "unable to stop the event_line chl %d (log: %d)" + "status %x\n", d40c->phy_chan->num, + d40c->log_num, status); + } + break; + + case D40_ACTIVATE_EVENTLINE: /* * The hardware sometimes doesn't register the enable when src and dst * event lines are active on the same logical channel. Retry to ensure * it does. Usually only one retry is sufficient. */ - tries = 100; - while (--tries) { - writel((D40_ACTIVATE_EVENTLINE << D40_EVENTLINE_POS(event)) - | ~D40_EVENTLINE_MASK(event), addr); + tries = 100; + while (--tries) { + writel((D40_ACTIVATE_EVENTLINE << + D40_EVENTLINE_POS(event)) | + ~D40_EVENTLINE_MASK(event), addr); + + if (readl(addr) & D40_EVENTLINE_MASK(event)) + break; + } + + if (tries != 99) + dev_dbg(chan2dev(d40c), + "[%s] workaround enable S%cLNK (%d tries)\n", + __func__, reg == D40_CHAN_REG_SSLNK ? 'S' : 'D', + 100 - tries); + + WARN_ON(!tries); + break; + + case D40_ROUND_EVENTLINE: + BUG(); + break; - if (readl(addr) & D40_EVENTLINE_MASK(event)) - break; } - - if (tries != 99) - dev_dbg(chan2dev(d40c), - "[%s] workaround enable S%cLNK (%d tries)\n", - __func__, reg == D40_CHAN_REG_SSLNK ? 'S' : 'D', - 100 - tries); - - WARN_ON(!tries); } -static void d40_config_set_event(struct d40_chan *d40c, bool do_enable) +static void d40_config_set_event(struct d40_chan *d40c, + enum d40_events event_type) { - unsigned long flags; - - spin_lock_irqsave(&d40c->phy_chan->lock, flags); - /* Enable event line connected to device (or memcpy) */ if ((d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_MEM) || (d40c->dma_cfg.dir == STEDMA40_PERIPH_TO_PERIPH)) { u32 event = D40_TYPE_TO_EVENT(d40c->dma_cfg.src_dev_type); - __d40_config_set_event(d40c, do_enable, event, + __d40_config_set_event(d40c, event_type, event, D40_CHAN_REG_SSLNK); } if (d40c->dma_cfg.dir != STEDMA40_PERIPH_TO_MEM) { u32 event = D40_TYPE_TO_EVENT(d40c->dma_cfg.dst_dev_type); - __d40_config_set_event(d40c, do_enable, event, + __d40_config_set_event(d40c, event_type, event, D40_CHAN_REG_SDLNK); } - - spin_unlock_irqrestore(&d40c->phy_chan->lock, flags); } static u32 d40_chan_has_events(struct d40_chan *d40c) @@ -1047,6 +1111,64 @@ static u32 d40_chan_has_events(struct d40_chan *d40c) return val; } +static int +__d40_execute_command_log(struct d40_chan *d40c, enum d40_command command) +{ + unsigned long flags; + int ret = 0; + u32 active_status; + void __iomem *active_reg; + + if (d40c->phy_chan->num % 2 == 0) + active_reg = d40c->base->virtbase + D40_DREG_ACTIVE; + else + active_reg = d40c->base->virtbase + D40_DREG_ACTIVO; + + + spin_lock_irqsave(&d40c->phy_chan->lock, flags); + + switch (command) { + case D40_DMA_STOP: + case D40_DMA_SUSPEND_REQ: + + active_status = (readl(active_reg) & + D40_CHAN_POS_MASK(d40c->phy_chan->num)) >> + D40_CHAN_POS(d40c->phy_chan->num); + + if (active_status == D40_DMA_RUN) + d40_config_set_event(d40c, D40_SUSPEND_REQ_EVENTLINE); + else + d40_config_set_event(d40c, D40_DEACTIVATE_EVENTLINE); + + if (!d40_chan_has_events(d40c) && (command == D40_DMA_STOP)) + ret = __d40_execute_command_phy(d40c, command); + + break; + + case D40_DMA_RUN: + + d40_config_set_event(d40c, D40_ACTIVATE_EVENTLINE); + ret = __d40_execute_command_phy(d40c, command); + break; + + case D40_DMA_SUSPENDED: + BUG(); + break; + } + + spin_unlock_irqrestore(&d40c->phy_chan->lock, flags); + return ret; +} + +static int d40_channel_execute_command(struct d40_chan *d40c, + enum d40_command command) +{ + if (chan_is_logical(d40c)) + return __d40_execute_command_log(d40c, command); + else + return __d40_execute_command_phy(d40c, command); +} + static u32 d40_get_prmo(struct d40_chan *d40c) { static const unsigned int phy_map[] = { @@ -1149,15 +1271,7 @@ static int d40_pause(struct d40_chan *d40c) spin_lock_irqsave(&d40c->lock, flags); res = d40_channel_execute_command(d40c, D40_DMA_SUSPEND_REQ); - if (res == 0) { - if (chan_is_logical(d40c)) { - d40_config_set_event(d40c, false); - /* Resume the other logical channels if any */ - if (d40_chan_has_events(d40c)) - res = d40_channel_execute_command(d40c, - D40_DMA_RUN); - } - } + pm_runtime_mark_last_busy(d40c->base->dev); pm_runtime_put_autosuspend(d40c->base->dev); spin_unlock_irqrestore(&d40c->lock, flags); @@ -1174,45 +1288,17 @@ static int d40_resume(struct d40_chan *d40c) spin_lock_irqsave(&d40c->lock, flags); pm_runtime_get_sync(d40c->base->dev); - if (d40c->base->rev == 0) - if (chan_is_logical(d40c)) { - res = d40_channel_execute_command(d40c, - D40_DMA_SUSPEND_REQ); - goto no_suspend; - } /* If bytes left to transfer or linked tx resume job */ - if (d40_residue(d40c) || d40_tx_is_linked(d40c)) { - - if (chan_is_logical(d40c)) - d40_config_set_event(d40c, true); - + if (d40_residue(d40c) || d40_tx_is_linked(d40c)) res = d40_channel_execute_command(d40c, D40_DMA_RUN); - } -no_suspend: pm_runtime_mark_last_busy(d40c->base->dev); pm_runtime_put_autosuspend(d40c->base->dev); spin_unlock_irqrestore(&d40c->lock, flags); return res; } -static int d40_terminate_all(struct d40_chan *chan) -{ - unsigned long flags; - int ret = 0; - - ret = d40_pause(chan); - if (!ret && chan_is_physical(chan)) - ret = d40_channel_execute_command(chan, D40_DMA_STOP); - - spin_lock_irqsave(&chan->lock, flags); - d40_term_all(chan); - spin_unlock_irqrestore(&chan->lock, flags); - - return ret; -} - static dma_cookie_t d40_tx_submit(struct dma_async_tx_descriptor *tx) { struct d40_chan *d40c = container_of(tx->chan, @@ -1232,20 +1318,6 @@ static dma_cookie_t d40_tx_submit(struct dma_async_tx_descriptor *tx) static int d40_start(struct d40_chan *d40c) { - if (d40c->base->rev == 0) { - int err; - - if (chan_is_logical(d40c)) { - err = d40_channel_execute_command(d40c, - D40_DMA_SUSPEND_REQ); - if (err) - return err; - } - } - - if (chan_is_logical(d40c)) - d40_config_set_event(d40c, true); - return d40_channel_execute_command(d40c, D40_DMA_RUN); } @@ -1258,10 +1330,10 @@ static struct d40_desc *d40_queue_start(struct d40_chan *d40c) d40d = d40_first_queued(d40c); if (d40d != NULL) { - if (!d40c->busy) + if (!d40c->busy) { d40c->busy = true; - - pm_runtime_get_sync(d40c->base->dev); + pm_runtime_get_sync(d40c->base->dev); + } /* Remove from queue */ d40_desc_remove(d40d); @@ -1388,8 +1460,8 @@ static void dma_tasklet(unsigned long data) return; - err: - /* Rescue manoeuvre if receiving double interrupts */ +err: + /* Rescue manouver if receiving double interrupts */ if (d40c->pending_tx > 0) d40c->pending_tx--; spin_unlock_irqrestore(&d40c->lock, flags); @@ -1770,7 +1842,6 @@ static int d40_config_memcpy(struct d40_chan *d40c) return 0; } - static int d40_free_dma(struct d40_chan *d40c) { @@ -1806,44 +1877,19 @@ static int d40_free_dma(struct d40_chan *d40c) } pm_runtime_get_sync(d40c->base->dev); - res = d40_channel_execute_command(d40c, D40_DMA_SUSPEND_REQ); - if (res) { - chan_err(d40c, "suspend failed\n"); - goto out; - } - - if (chan_is_logical(d40c)) { - /* Release logical channel, deactivate the event line */ - - d40_config_set_event(d40c, false); - d40c->base->lookup_log_chans[d40c->log_num] = NULL; - - /* - * Check if there are more logical allocation - * on this phy channel. - */ - if (!d40_alloc_mask_free(phy, is_src, event)) { - /* Resume the other logical channels if any */ - if (d40_chan_has_events(d40c)) { - res = d40_channel_execute_command(d40c, - D40_DMA_RUN); - if (res) - chan_err(d40c, - "Executing RUN command\n"); - } - goto out; - } - } else { - (void) d40_alloc_mask_free(phy, is_src, 0); - } - - /* Release physical channel */ res = d40_channel_execute_command(d40c, D40_DMA_STOP); if (res) { - chan_err(d40c, "Failed to stop channel\n"); + chan_err(d40c, "stop failed\n"); goto out; } + d40_alloc_mask_free(phy, is_src, chan_is_logical(d40c) ? event : 0); + + if (chan_is_logical(d40c)) + d40c->base->lookup_log_chans[d40c->log_num] = NULL; + else + d40c->base->lookup_phy_chans[phy->num] = NULL; + if (d40c->busy) { pm_runtime_mark_last_busy(d40c->base->dev); pm_runtime_put_autosuspend(d40c->base->dev); @@ -1852,7 +1898,6 @@ static int d40_free_dma(struct d40_chan *d40c) d40c->busy = false; d40c->phy_chan = NULL; d40c->configured = false; - d40c->base->lookup_phy_chans[phy->num] = NULL; out: pm_runtime_mark_last_busy(d40c->base->dev); @@ -2371,6 +2416,31 @@ static void d40_issue_pending(struct dma_chan *chan) spin_unlock_irqrestore(&d40c->lock, flags); } +static void d40_terminate_all(struct dma_chan *chan) +{ + unsigned long flags; + struct d40_chan *d40c = container_of(chan, struct d40_chan, chan); + int ret; + + spin_lock_irqsave(&d40c->lock, flags); + + pm_runtime_get_sync(d40c->base->dev); + ret = d40_channel_execute_command(d40c, D40_DMA_STOP); + if (ret) + chan_err(d40c, "Failed to stop channel\n"); + + d40_term_all(d40c); + pm_runtime_mark_last_busy(d40c->base->dev); + pm_runtime_put_autosuspend(d40c->base->dev); + if (d40c->busy) { + pm_runtime_mark_last_busy(d40c->base->dev); + pm_runtime_put_autosuspend(d40c->base->dev); + } + d40c->busy = false; + + spin_unlock_irqrestore(&d40c->lock, flags); +} + static int dma40_config_to_halfchannel(struct d40_chan *d40c, struct stedma40_half_channel_info *info, @@ -2551,7 +2621,8 @@ static int d40_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, switch (cmd) { case DMA_TERMINATE_ALL: - return d40_terminate_all(d40c); + d40_terminate_all(chan); + return 0; case DMA_PAUSE: return d40_pause(d40c); case DMA_RESUME: @@ -2908,6 +2979,12 @@ static struct d40_base * __init d40_hw_detect_init(struct platform_device *pdev) dev_info(&pdev->dev, "hardware revision: %d @ 0x%x\n", rev, res->start); + if (rev < 2) { + d40_err(&pdev->dev, "hardware revision: %d is not supported", + rev); + goto failure; + } + plat_data = pdev->dev.platform_data; /* Count the number of logical channels in use */ @@ -2998,6 +3075,7 @@ failure: if (base) { kfree(base->lcla_pool.alloc_map); + kfree(base->reg_val_backup_chan); kfree(base->lookup_log_chans); kfree(base->lookup_phy_chans); kfree(base->phy_res); diff --git a/drivers/dma/ste_dma40_ll.h b/drivers/dma/ste_dma40_ll.h index 8d3d490968a3..51e8e5396e9b 100644 --- a/drivers/dma/ste_dma40_ll.h +++ b/drivers/dma/ste_dma40_ll.h @@ -62,8 +62,6 @@ #define D40_SREG_ELEM_LOG_LIDX_MASK (0xFF << D40_SREG_ELEM_LOG_LIDX_POS) /* Link register */ -#define D40_DEACTIVATE_EVENTLINE 0x0 -#define D40_ACTIVATE_EVENTLINE 0x1 #define D40_EVENTLINE_POS(i) (2 * i) #define D40_EVENTLINE_MASK(i) (0x3 << D40_EVENTLINE_POS(i)) From 15e4b78d7338a41b020d29dab7ac13a234ebe833 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 12 Apr 2012 18:12:43 +0200 Subject: [PATCH 106/365] dma/ste_dma40: explicitly include regulator consumer header The patch "ARM: amba: Remove AMBA level regulator support" breaks the DMA40 driver since the header implicitly included the regulator consumer header. So include it explicitly and fix the build error. Cc: Mark Brown Signed-off-by: Linus Walleij Signed-off-by: Vinod Koul --- drivers/dma/ste_dma40.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c index c5f26cc2c277..94170424ce29 100644 --- a/drivers/dma/ste_dma40.c +++ b/drivers/dma/ste_dma40.c @@ -18,6 +18,7 @@ #include #include #include +#include #include From 7e426da823fc7cd428b82ff2cf3615da24c73352 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Thu, 12 Apr 2012 18:12:52 +0200 Subject: [PATCH 107/365] dma/ste_dma40: fix erroneous comparison A small fallout from Vinod's conversions to dma_transfer_direction, this small comparison was done with a dma_data_direction instead. Fix it by comparing against the correct enum. Signed-off-by: Linus Walleij Signed-off-by: Vinod Koul --- drivers/dma/ste_dma40.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c index 94170424ce29..2ed1ac3513f3 100644 --- a/drivers/dma/ste_dma40.c +++ b/drivers/dma/ste_dma40.c @@ -2116,7 +2116,7 @@ d40_prep_sg(struct dma_chan *dchan, struct scatterlist *sg_src, if (sg_next(&sg_src[sg_len - 1]) == sg_src) desc->cyclic = true; - if (direction != DMA_NONE) { + if (direction != DMA_TRANS_NONE) { dma_addr_t dev_addr = d40_get_dev_addr(chan, direction); if (direction == DMA_DEV_TO_MEM) From f0c4b8d653f5ee091fb8d4d02ed7eaad397491bb Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 20 Apr 2012 17:20:08 +0100 Subject: [PATCH 108/365] ARM: 7396/1: errata: only handle ARM erratum #326103 on affected cores Erratum #326103 ("FSR write bit incorrect on a SWP to read-only memory") only affects the ARM 1136 core prior to r1p0. The workaround disassembles the faulting instruction to determine whether it was a read or write access on all v6 cores. An issue has been reported on the ARM 11MPCore whereby loading the faulting instruction may happen in parallel with that page being unmapped, resulting in a deadlock due to the lack of TLB broadcasting in hardware: http://lists.infradead.org/pipermail/linux-arm-kernel/2012-March/091561.html This patch limits the workaround so that it is only used on affected cores, which are known to be UP only. Other v6 cores can rely on the FSR to indicate the access type correctly. Cc: stable@vger.kernel.org Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/Kconfig | 9 +++++++++ arch/arm/mm/abort-ev6.S | 19 ++++++++++++------- 2 files changed, 21 insertions(+), 7 deletions(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index cf006d40342c..36586dba6fa6 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1186,6 +1186,15 @@ if !MMU source "arch/arm/Kconfig-nommu" endif +config ARM_ERRATA_326103 + bool "ARM errata: FSR write bit incorrect on a SWP to read-only memory" + depends on CPU_V6 + help + Executing a SWP instruction to read-only memory does not set bit 11 + of the FSR on the ARM 1136 prior to r1p0. This causes the kernel to + treat the access as a read, preventing a COW from occurring and + causing the faulting task to livelock. + config ARM_ERRATA_411920 bool "ARM errata: Invalidation of the Instruction Cache operation can fail" depends on CPU_V6 || CPU_V6K diff --git a/arch/arm/mm/abort-ev6.S b/arch/arm/mm/abort-ev6.S index ff1f7cc11f87..80741992a9fc 100644 --- a/arch/arm/mm/abort-ev6.S +++ b/arch/arm/mm/abort-ev6.S @@ -26,18 +26,23 @@ ENTRY(v6_early_abort) mrc p15, 0, r1, c5, c0, 0 @ get FSR mrc p15, 0, r0, c6, c0, 0 @ get FAR /* - * Faulty SWP instruction on 1136 doesn't set bit 11 in DFSR (erratum 326103). - * The test below covers all the write situations, including Java bytecodes + * Faulty SWP instruction on 1136 doesn't set bit 11 in DFSR. */ - bic r1, r1, #1 << 11 @ clear bit 11 of FSR - tst r5, #PSR_J_BIT @ Java? +#ifdef CONFIG_ARM_ERRATA_326103 + ldr ip, =0x4107b36 + mrc p15, 0, r3, c0, c0, 0 @ get processor id + teq ip, r3, lsr #4 @ r0 ARM1136? bne do_DataAbort - do_thumb_abort fsr=r1, pc=r4, psr=r5, tmp=r3 - ldreq r3, [r4] @ read aborted ARM instruction + tst r5, #PSR_J_BIT @ Java? + tsteq r5, #PSR_T_BIT @ Thumb? + bne do_DataAbort + bic r1, r1, #1 << 11 @ clear bit 11 of FSR + ldr r3, [r4] @ read aborted ARM instruction #ifdef CONFIG_CPU_ENDIAN_BE8 - reveq r3, r3 + rev r3, r3 #endif do_ldrd_abort tmp=ip, insn=r3 tst r3, #1 << 20 @ L = 0 -> write orreq r1, r1, #1 << 11 @ yes. +#endif b do_DataAbort From f154fe9b806574437b47f08e924ad10c0e240b23 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 20 Apr 2012 17:21:08 +0100 Subject: [PATCH 109/365] ARM: 7397/1: l2x0: only apply workaround for erratum #753970 on PL310 The workaround for PL310 erratum #753970 can lead to deadlock on systems with an L220 cache controller. This patch makes the workaround effective only when the cache controller is identified as a PL310 at probe time. Cc: stable@vger.kernel.org Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/mm/cache-l2x0.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index a53fd2aaa2f4..a8d02c048a1f 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -32,6 +32,7 @@ static void __iomem *l2x0_base; static DEFINE_RAW_SPINLOCK(l2x0_lock); static u32 l2x0_way_mask; /* Bitmask of active ways */ static u32 l2x0_size; +static unsigned long sync_reg_offset = L2X0_CACHE_SYNC; struct l2x0_regs l2x0_saved_regs; @@ -61,12 +62,7 @@ static inline void cache_sync(void) { void __iomem *base = l2x0_base; -#ifdef CONFIG_PL310_ERRATA_753970 - /* write to an unmmapped register */ - writel_relaxed(0, base + L2X0_DUMMY_REG); -#else - writel_relaxed(0, base + L2X0_CACHE_SYNC); -#endif + writel_relaxed(0, base + sync_reg_offset); cache_wait(base + L2X0_CACHE_SYNC, 1); } @@ -331,6 +327,10 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask) else ways = 8; type = "L310"; +#ifdef CONFIG_PL310_ERRATA_753970 + /* Unmapped register. */ + sync_reg_offset = L2X0_DUMMY_REG; +#endif break; case L2X0_CACHE_ID_PART_L210: ways = (aux >> 13) & 0xf; From ab4d536890853ab6675ede65db40e2c0980cb0ea Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 20 Apr 2012 17:22:11 +0100 Subject: [PATCH 110/365] ARM: 7398/1: l2x0: only write to debug registers on PL310 PL310 errata #588369 and #727915 require writes to the debug registers of the cache controller to work around known problems. Writing these registers on L220 may cause deadlock, so ensure that we only perform this operation when we identify a PL310 at probe time. Cc: stable@vger.kernel.org Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/mm/cache-l2x0.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index a8d02c048a1f..2a8e380501e8 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -81,10 +81,13 @@ static inline void l2x0_inv_line(unsigned long addr) } #if defined(CONFIG_PL310_ERRATA_588369) || defined(CONFIG_PL310_ERRATA_727915) +static inline void debug_writel(unsigned long val) +{ + if (outer_cache.set_debug) + outer_cache.set_debug(val); +} -#define debug_writel(val) outer_cache.set_debug(val) - -static void l2x0_set_debug(unsigned long val) +static void pl310_set_debug(unsigned long val) { writel_relaxed(val, l2x0_base + L2X0_DEBUG_CTRL); } @@ -94,7 +97,7 @@ static inline void debug_writel(unsigned long val) { } -#define l2x0_set_debug NULL +#define pl310_set_debug NULL #endif #ifdef CONFIG_PL310_ERRATA_588369 @@ -331,6 +334,7 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask) /* Unmapped register. */ sync_reg_offset = L2X0_DUMMY_REG; #endif + outer_cache.set_debug = pl310_set_debug; break; case L2X0_CACHE_ID_PART_L210: ways = (aux >> 13) & 0xf; @@ -379,7 +383,6 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask) outer_cache.flush_all = l2x0_flush_all; outer_cache.inv_all = l2x0_inv_all; outer_cache.disable = l2x0_disable; - outer_cache.set_debug = l2x0_set_debug; printk(KERN_INFO "%s cache controller enabled\n", type); printk(KERN_INFO "l2x0: %d ways, CACHE_ID 0x%08x, AUX_CTRL 0x%08x, Cache size: %d B\n", From 2498814fcb3068f19b82b1519b4038721f61af43 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Mon, 23 Apr 2012 15:38:28 +0100 Subject: [PATCH 111/365] ARM: 7399/1: vfp: move user vfp state save/restore code out of signal.c The user VFP state must be preserved (subject to ucontext modifications) across invocation of a signal handler and this is currently handled by vfp_{preserve,restore}_context in signal.c Since this code requires intimate low-level knowledge of the VFP state, this patch moves it into vfpmodule.c. Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/include/asm/thread_info.h | 7 +++ arch/arm/kernel/signal.c | 55 ++------------------- arch/arm/vfp/vfpmodule.c | 79 ++++++++++++++++++++++++++++++ 3 files changed, 90 insertions(+), 51 deletions(-) diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h index d4c24d412a8d..0f04d84582e1 100644 --- a/arch/arm/include/asm/thread_info.h +++ b/arch/arm/include/asm/thread_info.h @@ -118,6 +118,13 @@ extern void iwmmxt_task_switch(struct thread_info *); extern void vfp_sync_hwstate(struct thread_info *); extern void vfp_flush_hwstate(struct thread_info *); +struct user_vfp; +struct user_vfp_exc; + +extern int vfp_preserve_user_clear_hwstate(struct user_vfp __user *, + struct user_vfp_exc __user *); +extern int vfp_restore_user_hwstate(struct user_vfp __user *, + struct user_vfp_exc __user *); #endif /* diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index 7cb532fc8aa4..d68d1b694680 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -180,44 +180,23 @@ static int restore_iwmmxt_context(struct iwmmxt_sigframe *frame) static int preserve_vfp_context(struct vfp_sigframe __user *frame) { - struct thread_info *thread = current_thread_info(); - struct vfp_hard_struct *h = &thread->vfpstate.hard; const unsigned long magic = VFP_MAGIC; const unsigned long size = VFP_STORAGE_SIZE; int err = 0; - vfp_sync_hwstate(thread); __put_user_error(magic, &frame->magic, err); __put_user_error(size, &frame->size, err); - /* - * Copy the floating point registers. There can be unused - * registers see asm/hwcap.h for details. - */ - err |= __copy_to_user(&frame->ufp.fpregs, &h->fpregs, - sizeof(h->fpregs)); - /* - * Copy the status and control register. - */ - __put_user_error(h->fpscr, &frame->ufp.fpscr, err); + if (err) + return -EFAULT; - /* - * Copy the exception registers. - */ - __put_user_error(h->fpexc, &frame->ufp_exc.fpexc, err); - __put_user_error(h->fpinst, &frame->ufp_exc.fpinst, err); - __put_user_error(h->fpinst2, &frame->ufp_exc.fpinst2, err); - - return err ? -EFAULT : 0; + return vfp_preserve_user_clear_hwstate(&frame->ufp, &frame->ufp_exc); } static int restore_vfp_context(struct vfp_sigframe __user *frame) { - struct thread_info *thread = current_thread_info(); - struct vfp_hard_struct *h = &thread->vfpstate.hard; unsigned long magic; unsigned long size; - unsigned long fpexc; int err = 0; __get_user_error(magic, &frame->magic, err); @@ -228,33 +207,7 @@ static int restore_vfp_context(struct vfp_sigframe __user *frame) if (magic != VFP_MAGIC || size != VFP_STORAGE_SIZE) return -EINVAL; - vfp_flush_hwstate(thread); - - /* - * Copy the floating point registers. There can be unused - * registers see asm/hwcap.h for details. - */ - err |= __copy_from_user(&h->fpregs, &frame->ufp.fpregs, - sizeof(h->fpregs)); - /* - * Copy the status and control register. - */ - __get_user_error(h->fpscr, &frame->ufp.fpscr, err); - - /* - * Sanitise and restore the exception registers. - */ - __get_user_error(fpexc, &frame->ufp_exc.fpexc, err); - /* Ensure the VFP is enabled. */ - fpexc |= FPEXC_EN; - /* Ensure FPINST2 is invalid and the exception flag is cleared. */ - fpexc &= ~(FPEXC_EX | FPEXC_FP2V); - h->fpexc = fpexc; - - __get_user_error(h->fpinst, &frame->ufp_exc.fpinst, err); - __get_user_error(h->fpinst2, &frame->ufp_exc.fpinst2, err); - - return err ? -EFAULT : 0; + return vfp_restore_user_hwstate(&frame->ufp, &frame->ufp_exc); } #endif diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index 858748eaa144..05872d92fca2 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -17,6 +17,8 @@ #include #include #include +#include +#include #include #include @@ -528,6 +530,83 @@ void vfp_flush_hwstate(struct thread_info *thread) put_cpu(); } +/* + * Save the current VFP state into the provided structures and prepare + * for entry into a new function (signal handler). + */ +int vfp_preserve_user_clear_hwstate(struct user_vfp __user *ufp, + struct user_vfp_exc __user *ufp_exc) +{ + struct thread_info *thread = current_thread_info(); + struct vfp_hard_struct *hwstate = &thread->vfpstate.hard; + int err = 0; + + /* Ensure that the saved hwstate is up-to-date. */ + vfp_sync_hwstate(thread); + + /* + * Copy the floating point registers. There can be unused + * registers see asm/hwcap.h for details. + */ + err |= __copy_to_user(&ufp->fpregs, &hwstate->fpregs, + sizeof(hwstate->fpregs)); + /* + * Copy the status and control register. + */ + __put_user_error(hwstate->fpscr, &ufp->fpscr, err); + + /* + * Copy the exception registers. + */ + __put_user_error(hwstate->fpexc, &ufp_exc->fpexc, err); + __put_user_error(hwstate->fpinst, &ufp_exc->fpinst, err); + __put_user_error(hwstate->fpinst2, &ufp_exc->fpinst2, err); + + if (err) + return -EFAULT; + return 0; +} + +/* Sanitise and restore the current VFP state from the provided structures. */ +int vfp_restore_user_hwstate(struct user_vfp __user *ufp, + struct user_vfp_exc __user *ufp_exc) +{ + struct thread_info *thread = current_thread_info(); + struct vfp_hard_struct *hwstate = &thread->vfpstate.hard; + unsigned long fpexc; + int err = 0; + + vfp_flush_hwstate(thread); + + /* + * Copy the floating point registers. There can be unused + * registers see asm/hwcap.h for details. + */ + err |= __copy_from_user(&hwstate->fpregs, &ufp->fpregs, + sizeof(hwstate->fpregs)); + /* + * Copy the status and control register. + */ + __get_user_error(hwstate->fpscr, &ufp->fpscr, err); + + /* + * Sanitise and restore the exception registers. + */ + __get_user_error(fpexc, &ufp_exc->fpexc, err); + + /* Ensure the VFP is enabled. */ + fpexc |= FPEXC_EN; + + /* Ensure FPINST2 is invalid and the exception flag is cleared. */ + fpexc &= ~(FPEXC_EX | FPEXC_FP2V); + hwstate->fpexc = fpexc; + + __get_user_error(hwstate->fpinst, &ufp_exc->fpinst, err); + __get_user_error(hwstate->fpinst2, &ufp_exc->fpinst2, err); + + return err ? -EFAULT : 0; +} + /* * VFP hardware can lose all context when a CPU goes offline. * As we will be running in SMP mode with CPU hotplug, we will save the From ff9a184cfb6542bef98aff1789481284e122a4b3 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Mon, 23 Apr 2012 15:42:16 +0100 Subject: [PATCH 112/365] ARM: 7400/1: vfp: clear fpscr length and stride bits on entry to sig handler The ARM PCS mandates that the length and stride bits of the fpscr are cleared on entry to and return from a public interface. Although signal handlers run asynchronously with respect to the interrupted function, the handler itself expects to run as though it has been called like a normal function. This patch updates the state mirroring the VFP hardware before entry to a signal handler so that it adheres to the PCS. Furthermore, we disable VFP to ensure that we trap on any floating point operation performed by the signal handler and synchronise the hardware appropriately. A check is inserted after the signal handler to avoid redundant flushing if VFP was not used. Reported-by: Peter Maydell Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/vfp/vfpmodule.c | 22 +++++++++++++++++++++- 1 file changed, 21 insertions(+), 1 deletion(-) diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index 05872d92fca2..bc683b8219b5 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -564,6 +564,21 @@ int vfp_preserve_user_clear_hwstate(struct user_vfp __user *ufp, if (err) return -EFAULT; + + /* Ensure that VFP is disabled. */ + vfp_flush_hwstate(thread); + + /* + * As per the PCS, clear the length and stride bits for function + * entry. + */ + hwstate->fpscr &= ~(FPSCR_LENGTH_MASK | FPSCR_STRIDE_MASK); + + /* + * Disable VFP in the hwstate so that we can detect if it gets + * used. + */ + hwstate->fpexc &= ~FPEXC_EN; return 0; } @@ -576,7 +591,12 @@ int vfp_restore_user_hwstate(struct user_vfp __user *ufp, unsigned long fpexc; int err = 0; - vfp_flush_hwstate(thread); + /* + * If VFP has been used, then disable it to avoid corrupting + * the new thread state. + */ + if (hwstate->fpexc & FPEXC_EN) + vfp_flush_hwstate(thread); /* * Copy the floating point registers. There can be unused From 754aba436bed2051deaa2af7bdda553df056b6fc Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 18 Apr 2012 22:26:51 +0100 Subject: [PATCH 113/365] ARM: 7390/1: dts: versatile-pb/ab fix MMC IRQs The MMCI driver will not work without two IRQs since this is not flagged as a single-irq variant. Looking through the complex IRQ definition for the MMCI on the versatile (including an #if 1 statement forcing MMCI IRQ0 to the VIC) this appears to the the correct IRQ number for both models. Cc: Niklas Hernaeus Signed-off-by: Linus Walleij Signed-off-by: Russell King --- arch/arm/boot/dts/versatile-ab.dts | 2 +- arch/arm/boot/dts/versatile-pb.dts | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/versatile-ab.dts b/arch/arm/boot/dts/versatile-ab.dts index 0b32925f2147..e2fe3195c0d1 100644 --- a/arch/arm/boot/dts/versatile-ab.dts +++ b/arch/arm/boot/dts/versatile-ab.dts @@ -173,7 +173,7 @@ mmc@5000 { compatible = "arm,primecell"; reg = < 0x5000 0x1000>; - interrupts = <22>; + interrupts = <22 34>; }; kmi@6000 { compatible = "arm,pl050", "arm,primecell"; diff --git a/arch/arm/boot/dts/versatile-pb.dts b/arch/arm/boot/dts/versatile-pb.dts index 166461073b78..7e8175269064 100644 --- a/arch/arm/boot/dts/versatile-pb.dts +++ b/arch/arm/boot/dts/versatile-pb.dts @@ -41,7 +41,7 @@ mmc@b000 { compatible = "arm,primecell"; reg = <0xb000 0x1000>; - interrupts = <23>; + interrupts = <23 34>; }; }; }; From 354535845ffb74d8a4827fbdaa493037d0030eea Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 14 Apr 2012 18:57:10 +0100 Subject: [PATCH 114/365] ARM: OMAP: fix DMA vs memory ordering Using coherent DMA memory with the OMAP DMA engine results in unpredictable behaviour due to memory ordering issues; as things stand, there is no guarantee that data written to coherent DMA memory will be visible to the DMA hardware. This is because the OMAP dma_write() accessor contains no barriers, necessary on ARMv6 and above. The effect of this can be seen in comments in the OMAP serial driver, which incorrectly talks about cache flushing for the coherent DMA stuff. Rather than adding barriers to the accessors, add it in the DMA support code just before we enable DMA, and just after we disable DMA. This avoids having barriers for every DMA register access. Acked-by: Tony Lindgren Acked-by: Santosh Shilimkar Signed-off-by: Russell King --- arch/arm/plat-omap/dma.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index ecdb3da0dea9..c58d896cd5c3 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -916,6 +916,13 @@ void omap_start_dma(int lch) l |= OMAP_DMA_CCR_BUFFERING_DISABLE; l |= OMAP_DMA_CCR_EN; + /* + * As dma_write() uses IO accessors which are weakly ordered, there + * is no guarantee that data in coherent DMA memory will be visible + * to the DMA device. Add a memory barrier here to ensure that any + * such data is visible prior to enabling DMA. + */ + mb(); p->dma_write(l, CCR, lch); dma_chan[lch].flags |= OMAP_DMA_ACTIVE; @@ -965,6 +972,13 @@ void omap_stop_dma(int lch) p->dma_write(l, CCR, lch); } + /* + * Ensure that data transferred by DMA is visible to any access + * after DMA has been disabled. This is important for coherent + * DMA regions. + */ + mb(); + if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) { int next_lch, cur_lch = lch; char dma_chan_link_map[dma_lch_count]; From 9112a6b2fa4201c284c62a389710bd32b48c5f63 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Wed, 18 Apr 2012 16:17:13 -0400 Subject: [PATCH 115/365] xtensa: fix build failure in xtensa/kernel/signal.c Caused by commit 3785006ac3c8941feb63097c416de92114a6bc39 "xtensa: don't mask signals if we fail to setup signal stack" It assigns a return value to "ret", but there is no such variable anywhere in scope. Create one. Cc: Oleg Nesterov Cc: Chris Zankel Acked-by: Matt Fleming Signed-off-by: Paul Gortmaker --- arch/xtensa/kernel/signal.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/xtensa/kernel/signal.c b/arch/xtensa/kernel/signal.c index b69b000349fc..d78869a00b11 100644 --- a/arch/xtensa/kernel/signal.c +++ b/arch/xtensa/kernel/signal.c @@ -496,6 +496,7 @@ int do_signal(struct pt_regs *regs, sigset_t *oldset) signr = get_signal_to_deliver(&info, &ka, regs, NULL); if (signr > 0) { + int ret; /* Are we from a system call? */ From bfae8ee8d28e6a4ac1d63e8077cb09928d8a557a Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Wed, 18 Apr 2012 16:20:38 -0400 Subject: [PATCH 116/365] xtensa: fix build error in xtensa/include/asm/io.h Caused by commit 6c03438edeb5c359af35f060ea016ca65671c269 kernel.h: doesn't explicitly use bug.h, so don't include it. This header uses bug.h so explicitly include it now that the implicit presence was removed by 6c03438ed. Signed-off-by: Paul Gortmaker --- arch/xtensa/include/asm/io.h | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/xtensa/include/asm/io.h b/arch/xtensa/include/asm/io.h index d04cd3a625fa..4beb43c087d3 100644 --- a/arch/xtensa/include/asm/io.h +++ b/arch/xtensa/include/asm/io.h @@ -14,6 +14,7 @@ #ifdef __KERNEL__ #include #include +#include #include #include From 9f3045eca89a2e6fdd1901aafb9e28231d3f31fb Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Wed, 18 Apr 2012 16:29:57 -0400 Subject: [PATCH 117/365] irq: hide debug macros so they don't collide with others. The file kernel/irq/debug.h temporarily defines P, PS, PD and then undefines them. However these names aren't really "internal" enough, and collide with other more legit users such as the ones in the xtensa arch, causing: In file included from kernel/irq/internals.h:58:0, from kernel/irq/irqdesc.c:18: kernel/irq/debug.h:8:0: warning: "PS" redefined [enabled by default] arch/xtensa/include/asm/regs.h:59:0: note: this is the location of the previous definition Add a handful of underscores to do a better job of hiding these temporary macros. Cc: Thomas Gleixner Signed-off-by: Paul Gortmaker --- kernel/irq/debug.h | 38 +++++++++++++++++++------------------- 1 file changed, 19 insertions(+), 19 deletions(-) diff --git a/kernel/irq/debug.h b/kernel/irq/debug.h index 97a8bfadc88a..e75e29e4434a 100644 --- a/kernel/irq/debug.h +++ b/kernel/irq/debug.h @@ -4,10 +4,10 @@ #include -#define P(f) if (desc->status_use_accessors & f) printk("%14s set\n", #f) -#define PS(f) if (desc->istate & f) printk("%14s set\n", #f) +#define ___P(f) if (desc->status_use_accessors & f) printk("%14s set\n", #f) +#define ___PS(f) if (desc->istate & f) printk("%14s set\n", #f) /* FIXME */ -#define PD(f) do { } while (0) +#define ___PD(f) do { } while (0) static inline void print_irq_desc(unsigned int irq, struct irq_desc *desc) { @@ -23,23 +23,23 @@ static inline void print_irq_desc(unsigned int irq, struct irq_desc *desc) print_symbol("%s\n", (unsigned long)desc->action->handler); } - P(IRQ_LEVEL); - P(IRQ_PER_CPU); - P(IRQ_NOPROBE); - P(IRQ_NOREQUEST); - P(IRQ_NOTHREAD); - P(IRQ_NOAUTOEN); + ___P(IRQ_LEVEL); + ___P(IRQ_PER_CPU); + ___P(IRQ_NOPROBE); + ___P(IRQ_NOREQUEST); + ___P(IRQ_NOTHREAD); + ___P(IRQ_NOAUTOEN); - PS(IRQS_AUTODETECT); - PS(IRQS_REPLAY); - PS(IRQS_WAITING); - PS(IRQS_PENDING); + ___PS(IRQS_AUTODETECT); + ___PS(IRQS_REPLAY); + ___PS(IRQS_WAITING); + ___PS(IRQS_PENDING); - PD(IRQS_INPROGRESS); - PD(IRQS_DISABLED); - PD(IRQS_MASKED); + ___PD(IRQS_INPROGRESS); + ___PD(IRQS_DISABLED); + ___PD(IRQS_MASKED); } -#undef P -#undef PS -#undef PD +#undef ___P +#undef ___PS +#undef ___PD From 6bbbc30ce6b0ae428575c8af7c2a6c342c534e19 Mon Sep 17 00:00:00 2001 From: Richard Kuo Date: Tue, 15 Nov 2011 16:58:11 -0600 Subject: [PATCH 118/365] Hexagon: misc compile warning/error cleanup due to missing headers Fixed warnings/errors for EXPORT_SYMBOL, linux_binprm, elf related defines Signed-off-by: Richard Kuo --- arch/hexagon/kernel/dma.c | 1 + arch/hexagon/kernel/ptrace.c | 1 + arch/hexagon/kernel/time.c | 1 + arch/hexagon/kernel/vdso.c | 1 + 4 files changed, 4 insertions(+) diff --git a/arch/hexagon/kernel/dma.c b/arch/hexagon/kernel/dma.c index 37302218ca4a..0f2367cc5493 100644 --- a/arch/hexagon/kernel/dma.c +++ b/arch/hexagon/kernel/dma.c @@ -22,6 +22,7 @@ #include #include #include +#include struct dma_map_ops *dma_ops; EXPORT_SYMBOL(dma_ops); diff --git a/arch/hexagon/kernel/ptrace.c b/arch/hexagon/kernel/ptrace.c index 32342de1a79c..96c3b2c4dbad 100644 --- a/arch/hexagon/kernel/ptrace.c +++ b/arch/hexagon/kernel/ptrace.c @@ -28,6 +28,7 @@ #include #include #include +#include #include diff --git a/arch/hexagon/kernel/time.c b/arch/hexagon/kernel/time.c index 6bee15c9c113..5d9b33b67935 100644 --- a/arch/hexagon/kernel/time.c +++ b/arch/hexagon/kernel/time.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include diff --git a/arch/hexagon/kernel/vdso.c b/arch/hexagon/kernel/vdso.c index f212a453b527..5d39f42f7085 100644 --- a/arch/hexagon/kernel/vdso.c +++ b/arch/hexagon/kernel/vdso.c @@ -21,6 +21,7 @@ #include #include #include +#include #include From e8e42a5cff0704e83151455307a9b0d78fb43b93 Mon Sep 17 00:00:00 2001 From: Richard Kuo Date: Wed, 7 Mar 2012 15:27:23 -0600 Subject: [PATCH 119/365] hexagon: use renamed tick_nohz_idle_* functions Signed-off-by: Richard Kuo --- arch/hexagon/kernel/process.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/hexagon/kernel/process.c b/arch/hexagon/kernel/process.c index 18c4f0b0f4ba..ff02821bfb7e 100644 --- a/arch/hexagon/kernel/process.c +++ b/arch/hexagon/kernel/process.c @@ -1,7 +1,7 @@ /* * Process creation support for Hexagon * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2012, Code Aurora Forum. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and @@ -88,7 +88,7 @@ void (*idle_sleep)(void) = default_idle; void cpu_idle(void) { while (1) { - tick_nohz_stop_sched_tick(1); + tick_nohz_idle_enter(); local_irq_disable(); while (!need_resched()) { idle_sleep(); @@ -97,7 +97,7 @@ void cpu_idle(void) local_irq_disable(); } local_irq_enable(); - tick_nohz_restart_sched_tick(); + tick_nohz_idle_exit(); schedule(); } } From 57f27cca7ab59cec05adc85cef97e9b4f7d28d78 Mon Sep 17 00:00:00 2001 From: "Srivatsa S. Bhat" Date: Thu, 22 Mar 2012 16:58:25 +0530 Subject: [PATCH 120/365] hexagon/CPU hotplug: Add missing call to notify_cpu_starting() The scheduler depends on receiving the CPU_STARTING notification, without which we end up into a lot of trouble. So add the missing call to notify_cpu_starting() in the bringup code. Signed-off-by: Srivatsa S. Bhat Signed-off-by: Richard Kuo --- arch/hexagon/kernel/smp.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/hexagon/kernel/smp.c b/arch/hexagon/kernel/smp.c index 9b44a9e2d05a..0672463df20c 100644 --- a/arch/hexagon/kernel/smp.c +++ b/arch/hexagon/kernel/smp.c @@ -177,7 +177,12 @@ void __cpuinit start_secondary(void) printk(KERN_INFO "%s cpu %d\n", __func__, current_thread_info()->cpu); + notify_cpu_starting(cpu); + + ipi_call_lock(); set_cpu_online(cpu, true); + ipi_call_unlock(); + local_irq_enable(); cpu_idle(); From e00574b7f3181c5277df819e960d5af205e0e87a Mon Sep 17 00:00:00 2001 From: Richard Kuo Date: Thu, 12 Apr 2012 15:57:33 -0500 Subject: [PATCH 121/365] hexagon: add missing cpu.h include Signed-off-by: Richard Kuo --- arch/hexagon/kernel/smp.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/hexagon/kernel/smp.c b/arch/hexagon/kernel/smp.c index 0672463df20c..1298141874a3 100644 --- a/arch/hexagon/kernel/smp.c +++ b/arch/hexagon/kernel/smp.c @@ -1,7 +1,7 @@ /* * SMP support for Hexagon * - * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2010-2012, Code Aurora Forum. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and @@ -28,6 +28,7 @@ #include #include #include +#include #include /* timer_interrupt */ #include From 64ea57d0c77bd85003b63c6090ddfae114ef6508 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Sun, 15 Apr 2012 20:38:05 +0200 Subject: [PATCH 122/365] ath9k: add an extra boolean parameter to ath9k_hw_apply_txpower In order to unifying regulatory limit handling commit ca2c68cc7bc80fc4504fb420df04cce99c9ee6ec (ath9k_hw: clean up tx power handling) introduced a new helper function 'ath9k_hw_apply_txpower', and the direct calls of 'ah->eep_ops->set_txpower' has been replaced by a call of the helper function. This caused a change in the behaviour of the 'ath9k_hw_set_txpowerlimit' function. The purpose of that function is to calculate and store the rate txpower table and the regulatory limit without touching the hardware registers. Before the commit, the 'test' parameter of the function was passed to the 'ah->eep_ops->set_txpower'. Now the calling of the 'set_txpower' function happens indirectly through 'ath9k_hw_apply_txpower', so the 'test' argument of the 'set_txpower' is always 'false'. This patch restores the original behaviour of 'ath9k_hw_set_txpowerlimit' by adding a new argument to 'ath9k_hw_apply_txpower.' Signed-off-by: Gabor Juhos Acked-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar5008_phy.c | 2 +- drivers/net/wireless/ath/ath9k/ar9003_paprd.c | 2 +- drivers/net/wireless/ath/ath9k/ar9003_phy.c | 2 +- drivers/net/wireless/ath/ath9k/hw.c | 9 +++++---- drivers/net/wireless/ath/ath9k/hw.h | 3 ++- 5 files changed, 10 insertions(+), 8 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ar5008_phy.c b/drivers/net/wireless/ath/ath9k/ar5008_phy.c index d7d8e9199140..aba088005b22 100644 --- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c @@ -869,7 +869,7 @@ static int ar5008_hw_process_ini(struct ath_hw *ah, ar5008_hw_set_channel_regs(ah, chan); ar5008_hw_init_chain_masks(ah); ath9k_olc_init(ah); - ath9k_hw_apply_txpower(ah, chan); + ath9k_hw_apply_txpower(ah, chan, false); /* Write analog registers */ if (!ath9k_hw_set_rf_regs(ah, chan, freqIndex)) { diff --git a/drivers/net/wireless/ath/ath9k/ar9003_paprd.c b/drivers/net/wireless/ath/ath9k/ar9003_paprd.c index 59647a3ceb7f..3d400e8d6535 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_paprd.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_paprd.c @@ -54,7 +54,7 @@ void ar9003_paprd_enable(struct ath_hw *ah, bool val) if (val) { ah->paprd_table_write_done = true; - ath9k_hw_apply_txpower(ah, chan); + ath9k_hw_apply_txpower(ah, chan, false); } REG_RMW_FIELD(ah, AR_PHY_PAPRD_CTRL0_B0, diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c index bc992b237ae5..deb6cfb2959a 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c @@ -694,7 +694,7 @@ static int ar9003_hw_process_ini(struct ath_hw *ah, ar9003_hw_override_ini(ah); ar9003_hw_set_channel_regs(ah, chan); ar9003_hw_set_chain_masks(ah, ah->rxchainmask, ah->txchainmask); - ath9k_hw_apply_txpower(ah, chan); + ath9k_hw_apply_txpower(ah, chan, false); if (AR_SREV_9462(ah)) { if (REG_READ_FIELD(ah, AR_PHY_TX_IQCAL_CONTROL_0, diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 6c69e4e8b1cb..fa84e37bf091 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -1454,7 +1454,7 @@ static bool ath9k_hw_channel_change(struct ath_hw *ah, return false; } ath9k_hw_set_clockrate(ah); - ath9k_hw_apply_txpower(ah, chan); + ath9k_hw_apply_txpower(ah, chan, false); ath9k_hw_rfbus_done(ah); if (IS_CHAN_OFDM(chan) || IS_CHAN_HT(chan)) @@ -2652,7 +2652,8 @@ static int get_antenna_gain(struct ath_hw *ah, struct ath9k_channel *chan) return ah->eep_ops->get_eeprom(ah, gain_param); } -void ath9k_hw_apply_txpower(struct ath_hw *ah, struct ath9k_channel *chan) +void ath9k_hw_apply_txpower(struct ath_hw *ah, struct ath9k_channel *chan, + bool test) { struct ath_regulatory *reg = ath9k_hw_regulatory(ah); struct ieee80211_channel *channel; @@ -2673,7 +2674,7 @@ void ath9k_hw_apply_txpower(struct ath_hw *ah, struct ath9k_channel *chan) ah->eep_ops->set_txpower(ah, chan, ath9k_regd_get_ctl(reg, chan), - ant_reduction, new_pwr, false); + ant_reduction, new_pwr, test); } void ath9k_hw_set_txpowerlimit(struct ath_hw *ah, u32 limit, bool test) @@ -2686,7 +2687,7 @@ void ath9k_hw_set_txpowerlimit(struct ath_hw *ah, u32 limit, bool test) if (test) channel->max_power = MAX_RATE_POWER / 2; - ath9k_hw_apply_txpower(ah, chan); + ath9k_hw_apply_txpower(ah, chan, test); if (test) channel->max_power = DIV_ROUND_UP(reg->max_power_level, 2); diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index aa1680a0c7fd..e88f182ff45c 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -985,7 +985,8 @@ void ath9k_hw_name(struct ath_hw *ah, char *hw_name, size_t len); /* PHY */ void ath9k_hw_get_delta_slope_vals(struct ath_hw *ah, u32 coef_scaled, u32 *coef_mantissa, u32 *coef_exponent); -void ath9k_hw_apply_txpower(struct ath_hw *ah, struct ath9k_channel *chan); +void ath9k_hw_apply_txpower(struct ath_hw *ah, struct ath9k_channel *chan, + bool test); /* * Code Specific to AR5008, AR9001 or AR9002, From 83722bd4aede80714f75bedc3cce9b6ea9baea7b Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Sun, 15 Apr 2012 20:38:06 +0200 Subject: [PATCH 123/365] ath9k: fix tx power settings for AR9287 The 'ath9k_hw_update_regulatory_maxpower' helper function has been introduced by commit a55f858852e4345d0a31af593c46738ca8614bff (ath9k_hw: Cleanup TX power calculation for AR9287). Updating of the max_power_level value has been moved into the helper function in that change, however the removed code from 'ath9k_hw_ar9287_set_txpower' has not been replaced with a call of the new helper function. Due to that missing call, retrieving tx power for 2x2 and 3x3 chainmask is not handled properly. During the calculation of the tx power for 2x2 and 3x3 chainmasks the values are reduced. Those reductions must be compensated during retrieving. Fix this by adding the missing call of the helper function. Signed-off-by: Gabor Juhos Acked-by: Sujith Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/eeprom_9287.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/ath/ath9k/eeprom_9287.c b/drivers/net/wireless/ath/ath9k/eeprom_9287.c index f272236d8053..b34e8b2990b1 100644 --- a/drivers/net/wireless/ath/ath9k/eeprom_9287.c +++ b/drivers/net/wireless/ath/ath9k/eeprom_9287.c @@ -824,6 +824,8 @@ static void ath9k_hw_ar9287_set_txpower(struct ath_hw *ah, regulatory->max_power_level = ratesArray[i]; } + ath9k_hw_update_regulatory_maxpower(ah); + if (test) return; From 8db4c7e25d153fb049e81715d72fa3be3a0c3b69 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Wed, 18 Apr 2012 08:01:15 -0700 Subject: [PATCH 124/365] iwlwifi: do not nulify ctx->vif on reset ctx->vif is dereferenced in different part of iwlwifi code, so do not nullify it. This should address at least one of the possible reasons of WARNING at iwlagn_mac_remove_interface, and perhaps some random crashes when firmware reset is performed. Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka Signed-off-by: Wey-Yi Guy Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-agn.c | 3 --- drivers/net/wireless/iwlwifi/iwl-mac80211.c | 10 +++++++++- 2 files changed, 9 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index f1226dbf789d..2a9a16f901c3 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -863,7 +863,6 @@ static void iwl_bg_run_time_calib_work(struct work_struct *work) void iwlagn_prepare_restart(struct iwl_priv *priv) { - struct iwl_rxon_context *ctx; bool bt_full_concurrent; u8 bt_ci_compliance; u8 bt_load; @@ -872,8 +871,6 @@ void iwlagn_prepare_restart(struct iwl_priv *priv) lockdep_assert_held(&priv->mutex); - for_each_context(priv, ctx) - ctx->vif = NULL; priv->is_open = 0; /* diff --git a/drivers/net/wireless/iwlwifi/iwl-mac80211.c b/drivers/net/wireless/iwlwifi/iwl-mac80211.c index b6805f8e9a01..c24a7134a6f9 100644 --- a/drivers/net/wireless/iwlwifi/iwl-mac80211.c +++ b/drivers/net/wireless/iwlwifi/iwl-mac80211.c @@ -1244,6 +1244,7 @@ static int iwlagn_mac_add_interface(struct ieee80211_hw *hw, struct iwl_rxon_context *tmp, *ctx = NULL; int err; enum nl80211_iftype viftype = ieee80211_vif_type_p2p(vif); + bool reset = false; IWL_DEBUG_MAC80211(priv, "enter: type %d, addr %pM\n", viftype, vif->addr); @@ -1265,6 +1266,13 @@ static int iwlagn_mac_add_interface(struct ieee80211_hw *hw, tmp->interface_modes | tmp->exclusive_interface_modes; if (tmp->vif) { + /* On reset we need to add the same interface again */ + if (tmp->vif == vif) { + reset = true; + ctx = tmp; + break; + } + /* check if this busy context is exclusive */ if (tmp->exclusive_interface_modes & BIT(tmp->vif->type)) { @@ -1291,7 +1299,7 @@ static int iwlagn_mac_add_interface(struct ieee80211_hw *hw, ctx->vif = vif; err = iwl_setup_interface(priv, ctx); - if (!err) + if (!err || reset) goto out; ctx->vif = NULL; From dd447319895d0c0af423e483d9b63f84f3f8869a Mon Sep 17 00:00:00 2001 From: Stanislav Yakovlev Date: Thu, 19 Apr 2012 15:55:09 -0400 Subject: [PATCH 125/365] ipw2200: Fix race condition in the command completion acknowledge Driver incorrectly validates command completion: instead of waiting for a command to be acknowledged it continues execution. Most of the time driver gets acknowledge of the command completion in a tasklet before it executes the next one. But sometimes it sends the next command before it gets acknowledge for the previous one. In such a case one of the following error messages appear in the log: Failed to send SYSTEM_CONFIG: Already sending a command. Failed to send ASSOCIATE: Already sending a command. Failed to send TX_POWER: Already sending a command. After that you need to reload the driver to get it working again. This bug occurs during roaming (reported by Sam Varshavchik) https://bugzilla.redhat.com/show_bug.cgi?id=738508 and machine booting (reported by Tom Gundersen and Mads Kiilerich) https://bugs.archlinux.org/task/28097 https://bugzilla.redhat.com/show_bug.cgi?id=802106 This patch doesn't fix the delay issue during firmware load. But at least device now works as usual after boot. Cc: stable@kernel.org Signed-off-by: Stanislav Yakovlev Signed-off-by: John W. Linville --- drivers/net/wireless/ipw2x00/ipw2200.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c index 2b022571a859..1779db3aa2b0 100644 --- a/drivers/net/wireless/ipw2x00/ipw2200.c +++ b/drivers/net/wireless/ipw2x00/ipw2200.c @@ -2191,6 +2191,7 @@ static int __ipw_send_cmd(struct ipw_priv *priv, struct host_cmd *cmd) { int rc = 0; unsigned long flags; + unsigned long now, end; spin_lock_irqsave(&priv->lock, flags); if (priv->status & STATUS_HCMD_ACTIVE) { @@ -2232,10 +2233,20 @@ static int __ipw_send_cmd(struct ipw_priv *priv, struct host_cmd *cmd) } spin_unlock_irqrestore(&priv->lock, flags); + now = jiffies; + end = now + HOST_COMPLETE_TIMEOUT; +again: rc = wait_event_interruptible_timeout(priv->wait_command_queue, !(priv-> status & STATUS_HCMD_ACTIVE), - HOST_COMPLETE_TIMEOUT); + end - now); + if (rc < 0) { + now = jiffies; + if (time_before(now, end)) + goto again; + rc = 0; + } + if (rc == 0) { spin_lock_irqsave(&priv->lock, flags); if (priv->status & STATUS_HCMD_ACTIVE) { From 44eb65cfd8da4b9c231238998729e858e963a980 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Thu, 19 Apr 2012 21:39:06 -0500 Subject: [PATCH 126/365] rtlwifi: Fix oops on unload Under some circumstances, a PCI-based driver reports the following OOPs: Mar 19 08:14:35 kvothe kernel: [ 6584.626011] Oops: 0000 [#1] SMP --snip-- Mar 19 08:14:35 kvothe kernel: [ 6584.626011] Pid: 19627, comm: rmmod Not tainted 3.2.9-2.fc16.x86_64 #1 LENOVO 05962RU/05962RU Mar 19 08:14:35 kvothe kernel: [ 6584.626011] RIP: 0010:[] [] rtl92ce_get_desc+0x19/0xd0 [rtl8192ce] --snip-- Mar 19 08:14:35 kvothe kernel: [ 6584.626011] Process rmmod (pid: 19627, threadinfo ffff880050262000, task ffff8801156d5cc0) Mar 19 08:14:35 kvothe kernel: [ 6584.626011] Stack: Mar 19 08:14:35 kvothe kernel: [ 6584.626011] 0000000000000002 ffff8801176c2540 ffff880050263ca8 ffffffffa03348e7 Mar 19 08:14:35 kvothe kernel: [ 6584.626011] 0000000000000282 0000000180150014 ffff880050263fd8 ffff8801176c2810 Mar 19 08:14:35 kvothe kernel: [ 6584.626011] ffff880050263bc8 ffffffff810550e2 00000000000002c0 ffff8801176c0d40 Mar 19 08:14:35 kvothe kernel: [ 6584.626011] Call Trace: Mar 19 08:14:35 kvothe kernel: [ 6584.626011] [] _rtl_pci_rx_interrupt+0x187/0x650 [rtlwifi] --snip-- Mar 19 08:14:35 kvothe kernel: [ 6584.626011] Code: ff 09 d0 89 07 48 83 c4 08 5b 5d c3 66 0f 1f 44 00 00 55 48 89 e5 53 48 83 ec 08 66 66 66 66 90 40 84 f6 89 d3 74 13 84 d2 75 57 <8b> 07 48 83 c4 08 5b 5d c1 e8 1f c3 0f 1f 00 84 d2 74 ed 80 fa Mar 19 08:14:35 kvothe kernel: [ 6584.626011] RIP [] rtl92ce_get_desc+0x19/0xd0 [rtl8192ce] Mar 19 08:14:35 kvothe kernel: [ 6584.626011] RSP Mar 19 08:14:35 kvothe kernel: [ 6584.626011] CR2: 00000000000006e0 Mar 19 08:14:35 kvothe kernel: [ 6584.646491] ---[ end trace 8636c766dcfbe0e6 ]--- This oops is due to interrupts not being disabled in this particular path. Reported-by: Dave Airlie Tested-by: Dave Airlie Signed-off-by: Larry Finger Cc: Stable Signed-off-by: John W. Linville --- drivers/net/wireless/rtlwifi/pci.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c index 288b035a3579..cc15fdb36060 100644 --- a/drivers/net/wireless/rtlwifi/pci.c +++ b/drivers/net/wireless/rtlwifi/pci.c @@ -1941,6 +1941,7 @@ void rtl_pci_disconnect(struct pci_dev *pdev) rtl_deinit_deferred_work(hw); rtlpriv->intf_ops->adapter_stop(hw); } + rtlpriv->cfg->ops->disable_interrupt(hw); /*deinit rfkill */ rtl_deinit_rfkill(hw); From 6ead629b27269c553c9092c47cd8f5ab0309ee3b Mon Sep 17 00:00:00 2001 From: Eldad Zack Date: Sun, 22 Apr 2012 00:48:04 +0200 Subject: [PATCH 127/365] brcmsmac: "INTERMEDIATE but not AMPDU" only when tracing I keep getting the following messages on the log buffer: [ 2167.097507] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU [ 2281.331305] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU [ 2281.332539] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU [ 2329.876605] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU [ 2329.877354] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU [ 2462.280756] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU [ 2615.651689] ieee80211 phy0: brcms_c_dotxstatus: INTERMEDIATE but not AMPDU From the code comment I understand that this something that can - and does, quite frequently - happen. Signed-off-by: Eldad Zack Acked-by: Franky Lin Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmsmac/main.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmsmac/main.c b/drivers/net/wireless/brcm80211/brcmsmac/main.c index 7083db75b00c..b4d92792c502 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/main.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c @@ -847,8 +847,7 @@ brcms_c_dotxstatus(struct brcms_c_info *wlc, struct tx_status *txs) */ if (!(txs->status & TX_STATUS_AMPDU) && (txs->status & TX_STATUS_INTERMEDIATE)) { - wiphy_err(wlc->wiphy, "%s: INTERMEDIATE but not AMPDU\n", - __func__); + BCMMSG(wlc->wiphy, "INTERMEDIATE but not AMPDU\n"); return false; } From 2a14e541ed87bca0c125b82961ca3c6f808607d2 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Sun, 22 Apr 2012 23:03:17 -0400 Subject: [PATCH 128/365] ACPI: Convert wake_sleep_flags to a value instead of function With commit a2ef5c4fd44ce3922435139393b89f2cce47f576 "ACPI: Move module parameter gts and bfs to sleep.c" the wake_sleep_flags is required when calling acpi_enter_sleep_state, which means that if there are functions outside the sleep.c code they can't get the wake_sleep_flags values. This converts the function in to a exported value and converts the module config operands to a function. Acked-by: Rafael J. Wysocki Acked-by: Lin Ming [v2: Parameters can be turned on/off dynamically] [v3: unsigned char -> u8] [v4: val -> kp->arg] Signed-off-by: Konrad Rzeszutek Wilk Link: http://lkml.kernel.org/r/1335150198-21899-2-git-send-email-konrad.wilk@oracle.com Signed-off-by: H. Peter Anvin --- arch/x86/kernel/acpi/sleep.h | 2 ++ drivers/acpi/sleep.c | 56 +++++++++++++++++++----------------- 2 files changed, 32 insertions(+), 26 deletions(-) diff --git a/arch/x86/kernel/acpi/sleep.h b/arch/x86/kernel/acpi/sleep.h index 416d4be13fef..fe5fdda5dcd7 100644 --- a/arch/x86/kernel/acpi/sleep.h +++ b/arch/x86/kernel/acpi/sleep.h @@ -9,6 +9,8 @@ extern long saved_magic; extern int wakeup_pmode_return; +extern u8 wake_sleep_flags; + extern unsigned long acpi_copy_wakeup_routine(unsigned long); extern void wakeup_long64(void); diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index 1d661b5c3287..eb6fd233764b 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -28,24 +28,34 @@ #include "internal.h" #include "sleep.h" +u8 wake_sleep_flags = ACPI_NO_OPTIONAL_METHODS; static unsigned int gts, bfs; -module_param(gts, uint, 0644); -module_param(bfs, uint, 0644); +static int set_param_wake_flag(const char *val, struct kernel_param *kp) +{ + int ret = param_set_int(val, kp); + + if (ret) + return ret; + + if (kp->arg == (const char *)>s) { + if (gts) + wake_sleep_flags |= ACPI_EXECUTE_GTS; + else + wake_sleep_flags &= ~ACPI_EXECUTE_GTS; + } + if (kp->arg == (const char *)&bfs) { + if (bfs) + wake_sleep_flags |= ACPI_EXECUTE_BFS; + else + wake_sleep_flags &= ~ACPI_EXECUTE_BFS; + } + return ret; +} +module_param_call(gts, set_param_wake_flag, param_get_int, >s, 0644); +module_param_call(bfs, set_param_wake_flag, param_get_int, &bfs, 0644); MODULE_PARM_DESC(gts, "Enable evaluation of _GTS on suspend."); MODULE_PARM_DESC(bfs, "Enable evaluation of _BFS on resume".); -static u8 wake_sleep_flags(void) -{ - u8 flags = ACPI_NO_OPTIONAL_METHODS; - - if (gts) - flags |= ACPI_EXECUTE_GTS; - if (bfs) - flags |= ACPI_EXECUTE_BFS; - - return flags; -} - static u8 sleep_states[ACPI_S_STATE_COUNT]; static void acpi_sleep_tts_switch(u32 acpi_state) @@ -263,7 +273,6 @@ static int acpi_suspend_enter(suspend_state_t pm_state) { acpi_status status = AE_OK; u32 acpi_state = acpi_target_sleep_state; - u8 flags = wake_sleep_flags(); int error; ACPI_FLUSH_CPU_CACHE(); @@ -271,7 +280,7 @@ static int acpi_suspend_enter(suspend_state_t pm_state) switch (acpi_state) { case ACPI_STATE_S1: barrier(); - status = acpi_enter_sleep_state(acpi_state, flags); + status = acpi_enter_sleep_state(acpi_state, wake_sleep_flags); break; case ACPI_STATE_S3: @@ -286,7 +295,7 @@ static int acpi_suspend_enter(suspend_state_t pm_state) acpi_write_bit_register(ACPI_BITREG_SCI_ENABLE, 1); /* Reprogram control registers and execute _BFS */ - acpi_leave_sleep_state_prep(acpi_state, flags); + acpi_leave_sleep_state_prep(acpi_state, wake_sleep_flags); /* ACPI 3.0 specs (P62) says that it's the responsibility * of the OSPM to clear the status bit [ implying that the @@ -550,30 +559,27 @@ static int acpi_hibernation_begin(void) static int acpi_hibernation_enter(void) { - u8 flags = wake_sleep_flags(); acpi_status status = AE_OK; ACPI_FLUSH_CPU_CACHE(); /* This shouldn't return. If it returns, we have a problem */ - status = acpi_enter_sleep_state(ACPI_STATE_S4, flags); + status = acpi_enter_sleep_state(ACPI_STATE_S4, wake_sleep_flags); /* Reprogram control registers and execute _BFS */ - acpi_leave_sleep_state_prep(ACPI_STATE_S4, flags); + acpi_leave_sleep_state_prep(ACPI_STATE_S4, wake_sleep_flags); return ACPI_SUCCESS(status) ? 0 : -EFAULT; } static void acpi_hibernation_leave(void) { - u8 flags = wake_sleep_flags(); - /* * If ACPI is not enabled by the BIOS and the boot kernel, we need to * enable it here. */ acpi_enable(); /* Reprogram control registers and execute _BFS */ - acpi_leave_sleep_state_prep(ACPI_STATE_S4, flags); + acpi_leave_sleep_state_prep(ACPI_STATE_S4, wake_sleep_flags); /* Check the hardware signature */ if (facs && s4_hardware_signature != facs->hardware_signature) { printk(KERN_EMERG "ACPI: Hardware changed while hibernated, " @@ -828,12 +834,10 @@ static void acpi_power_off_prepare(void) static void acpi_power_off(void) { - u8 flags = wake_sleep_flags(); - /* acpi_sleep_prepare(ACPI_STATE_S5) should have already been called */ printk(KERN_DEBUG "%s called\n", __func__); local_irq_disable(); - acpi_enter_sleep_state(ACPI_STATE_S5, flags); + acpi_enter_sleep_state(ACPI_STATE_S5, wake_sleep_flags); } /* From cd74257b974d6d26442c97891c4d05772748b177 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Sun, 22 Apr 2012 23:03:18 -0400 Subject: [PATCH 129/365] x86, acpi: Call acpi_enter_sleep_state via an asmlinkage C function from assembler With commit a2ef5c4fd44ce3922435139393b89f2cce47f576 "ACPI: Move module parameter gts and bfs to sleep.c" the wake_sleep_flags is required when calling acpi_enter_sleep_state. The assembler code in wakeup_*.S did not do that. One solution is to call it from assembler and stick the wake_sleep_flags on the stack (for 32-bit) or in %esi (for 64-bit). hpa and rafael both suggested however to create a wrapper function to call acpi_enter_sleep_state and call said wrapper function ("acpi_enter_s3") from assembler. For 32-bit, the acpi_enter_s3 ends up looking as so: push %ebp mov %esp,%ebp sub $0x8,%esp movzbl 0xc1809314,%eax [wake_sleep_flags] movl $0x3,(%esp) mov %eax,0x4(%esp) call 0xc12d1fa0 leave ret And 64-bit: movzbl 0x9afde1(%rip),%esi [wake_sleep_flags] push %rbp mov $0x3,%edi mov %rsp,%rbp callq 0xffffffff812e9800 leaveq retq Reviewed-by: H. Peter Anvin Suggested-by: H. Peter Anvin [v2: Remove extra assembler operations, per hpa review] Signed-off-by: Konrad Rzeszutek Wilk Link: http://lkml.kernel.org/r/1335150198-21899-3-git-send-email-konrad.wilk@oracle.com Signed-off-by: H. Peter Anvin --- arch/x86/kernel/acpi/sleep.c | 4 ++++ arch/x86/kernel/acpi/sleep.h | 2 ++ arch/x86/kernel/acpi/wakeup_32.S | 4 +--- arch/x86/kernel/acpi/wakeup_64.S | 4 +--- 4 files changed, 8 insertions(+), 6 deletions(-) diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c index 103b6ab368d3..146a49c763a4 100644 --- a/arch/x86/kernel/acpi/sleep.c +++ b/arch/x86/kernel/acpi/sleep.c @@ -24,6 +24,10 @@ unsigned long acpi_realmode_flags; static char temp_stack[4096]; #endif +asmlinkage void acpi_enter_s3(void) +{ + acpi_enter_sleep_state(3, wake_sleep_flags); +} /** * acpi_suspend_lowlevel - save kernel state * diff --git a/arch/x86/kernel/acpi/sleep.h b/arch/x86/kernel/acpi/sleep.h index fe5fdda5dcd7..d68677a2a010 100644 --- a/arch/x86/kernel/acpi/sleep.h +++ b/arch/x86/kernel/acpi/sleep.h @@ -3,6 +3,7 @@ */ #include +#include extern unsigned long saved_video_mode; extern long saved_magic; @@ -10,6 +11,7 @@ extern long saved_magic; extern int wakeup_pmode_return; extern u8 wake_sleep_flags; +extern asmlinkage void acpi_enter_s3(void); extern unsigned long acpi_copy_wakeup_routine(unsigned long); extern void wakeup_long64(void); diff --git a/arch/x86/kernel/acpi/wakeup_32.S b/arch/x86/kernel/acpi/wakeup_32.S index 13ab720573e3..72610839f03b 100644 --- a/arch/x86/kernel/acpi/wakeup_32.S +++ b/arch/x86/kernel/acpi/wakeup_32.S @@ -74,9 +74,7 @@ restore_registers: ENTRY(do_suspend_lowlevel) call save_processor_state call save_registers - pushl $3 - call acpi_enter_sleep_state - addl $4, %esp + call acpi_enter_s3 # In case of S3 failure, we'll emerge here. Jump # to ret_point to recover diff --git a/arch/x86/kernel/acpi/wakeup_64.S b/arch/x86/kernel/acpi/wakeup_64.S index 8ea5164cbd04..014d1d28c397 100644 --- a/arch/x86/kernel/acpi/wakeup_64.S +++ b/arch/x86/kernel/acpi/wakeup_64.S @@ -71,9 +71,7 @@ ENTRY(do_suspend_lowlevel) movq %rsi, saved_rsi addq $8, %rsp - movl $3, %edi - xorl %eax, %eax - call acpi_enter_sleep_state + call acpi_enter_s3 /* in case something went wrong, restore the machine status and go on */ jmp resume_point From ed8cd3b2cd61004cab85380c52b1817aca1ca49b Mon Sep 17 00:00:00 2001 From: Xi Wang Date: Mon, 23 Apr 2012 04:06:41 -0400 Subject: [PATCH 130/365] drm/i915: fix integer overflow in i915_gem_execbuffer2() On 32-bit systems, a large args->buffer_count from userspace via ioctl may overflow the allocation size, leading to out-of-bounds access. This vulnerability was introduced in commit 8408c282 ("drm/i915: First try a normal large kmalloc for the temporary exec buffers"). Signed-off-by: Xi Wang Reviewed-by: Chris Wilson Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_gem_execbuffer.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c index f51a696486cb..7c50e58175c0 100644 --- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c +++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c @@ -1404,7 +1404,8 @@ i915_gem_execbuffer2(struct drm_device *dev, void *data, struct drm_i915_gem_exec_object2 *exec2_list = NULL; int ret; - if (args->buffer_count < 1) { + if (args->buffer_count < 1 || + args->buffer_count > UINT_MAX / sizeof(*exec2_list)) { DRM_DEBUG("execbuf2 with %d buffers\n", args->buffer_count); return -EINVAL; } From 44afb3a04391a74309d16180d1e4f8386fdfa745 Mon Sep 17 00:00:00 2001 From: Xi Wang Date: Mon, 23 Apr 2012 04:06:42 -0400 Subject: [PATCH 131/365] drm/i915: fix integer overflow in i915_gem_do_execbuffer() On 32-bit systems, a large args->num_cliprects from userspace via ioctl may overflow the allocation size, leading to out-of-bounds access. This vulnerability was introduced in commit 432e58ed ("drm/i915: Avoid allocation for execbuffer object list"). Signed-off-by: Xi Wang Reviewed-by: Chris Wilson Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_gem_execbuffer.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c index 7c50e58175c0..de431942ded4 100644 --- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c +++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c @@ -1133,6 +1133,11 @@ i915_gem_do_execbuffer(struct drm_device *dev, void *data, return -EINVAL; } + if (args->num_cliprects > UINT_MAX / sizeof(*cliprects)) { + DRM_DEBUG("execbuf with %u cliprects\n", + args->num_cliprects); + return -EINVAL; + } cliprects = kmalloc(args->num_cliprects * sizeof(*cliprects), GFP_KERNEL); if (cliprects == NULL) { From 98e5272fe70d62e193f70acf9951667beab27aba Mon Sep 17 00:00:00 2001 From: "H.J. Lu" Date: Mon, 23 Apr 2012 14:51:14 -0700 Subject: [PATCH 132/365] x32: Check __ILP32__ instead of __LP64__ for x32 Check __LP64__ isn't a reliable way to tell if we are compiling for x32 since __LP64__ isnn't specified by x86-64 psABI. Not all x86-64 compilers define __LP64__, which was added to GCC 3.3. The updated x32 psABI: https://sites.google.com/site/x32abi/documents definse _ILP32 and __ILP32__ for x32. GCC trunk and 4.7 branch have been updated to define _ILP32 and __ILP32__ for x32. This patch replaces __LP64__ check with __ILP32__. Signed-off-by: H.J. Lu Signed-off-by: H. Peter Anvin --- arch/x86/include/asm/posix_types.h | 6 +++--- arch/x86/include/asm/sigcontext.h | 2 +- arch/x86/include/asm/unistd.h | 6 +++--- 3 files changed, 7 insertions(+), 7 deletions(-) diff --git a/arch/x86/include/asm/posix_types.h b/arch/x86/include/asm/posix_types.h index 3427b7798dbc..7ef7c3020e5c 100644 --- a/arch/x86/include/asm/posix_types.h +++ b/arch/x86/include/asm/posix_types.h @@ -7,9 +7,9 @@ #else # ifdef __i386__ # include "posix_types_32.h" -# elif defined(__LP64__) -# include "posix_types_64.h" -# else +# elif defined(__ILP32__) # include "posix_types_x32.h" +# else +# include "posix_types_64.h" # endif #endif diff --git a/arch/x86/include/asm/sigcontext.h b/arch/x86/include/asm/sigcontext.h index 4a085383af27..5ca71c065eef 100644 --- a/arch/x86/include/asm/sigcontext.h +++ b/arch/x86/include/asm/sigcontext.h @@ -257,7 +257,7 @@ struct sigcontext { __u64 oldmask; __u64 cr2; struct _fpstate __user *fpstate; /* zero when no FPU context */ -#ifndef __LP64__ +#ifdef __ILP32__ __u32 __fpstate_pad; #endif __u64 reserved1[8]; diff --git a/arch/x86/include/asm/unistd.h b/arch/x86/include/asm/unistd.h index 37cdc9d99bb1..4437001d8e3d 100644 --- a/arch/x86/include/asm/unistd.h +++ b/arch/x86/include/asm/unistd.h @@ -63,10 +63,10 @@ #else # ifdef __i386__ # include -# elif defined(__LP64__) -# include -# else +# elif defined(__ILP32__) # include +# else +# include # endif #endif From 2b7b9a7d6c676691cd746a654e2c3b06a6feb9ba Mon Sep 17 00:00:00 2001 From: David Brown Date: Mon, 23 Apr 2012 15:34:20 -0700 Subject: [PATCH 133/365] ARM: msm: Fix gic irqdomain support As of commit 75294957be1dee7d22dd7d90bd31334ba410e836 Author: Grant Likely Date: Tue Feb 14 14:06:57 2012 -0700 irq_domain: Remove 'new' irq_domain in favour of the ppc one the ARM gic controller uses proper irq domains. Fix the MSM gic initialization and DT so that it works again. Signed-off-by: David Brown Acked-by: Grant Likely --- arch/arm/boot/dts/msm8660-surf.dts | 4 ++-- arch/arm/mach-msm/board-msm8x60.c | 25 +++++++++++++++---------- 2 files changed, 17 insertions(+), 12 deletions(-) diff --git a/arch/arm/boot/dts/msm8660-surf.dts b/arch/arm/boot/dts/msm8660-surf.dts index 15ded0deaa79..45bc4bb04e57 100644 --- a/arch/arm/boot/dts/msm8660-surf.dts +++ b/arch/arm/boot/dts/msm8660-surf.dts @@ -10,7 +10,7 @@ intc: interrupt-controller@02080000 { compatible = "qcom,msm-8660-qgic"; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <3>; reg = < 0x02080000 0x1000 >, < 0x02081000 0x1000 >; }; @@ -19,6 +19,6 @@ compatible = "qcom,msm-hsuart", "qcom,msm-uart"; reg = <0x19c40000 0x1000>, <0x19c00000 0x1000>; - interrupts = <195>; + interrupts = <0 195 0x0>; }; }; diff --git a/arch/arm/mach-msm/board-msm8x60.c b/arch/arm/mach-msm/board-msm8x60.c index 962e71169750..fb3496a52ef4 100644 --- a/arch/arm/mach-msm/board-msm8x60.c +++ b/arch/arm/mach-msm/board-msm8x60.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include @@ -49,10 +50,22 @@ static void __init msm8x60_map_io(void) msm_map_msm8x60_io(); } +#ifdef CONFIG_OF +static struct of_device_id msm_dt_gic_match[] __initdata = { + { .compatible = "qcom,msm-8660-qgic", .data = gic_of_init }, + {} +}; +#endif + static void __init msm8x60_init_irq(void) { - gic_init(0, GIC_PPI_START, MSM_QGIC_DIST_BASE, - (void *)MSM_QGIC_CPU_BASE); + if (!of_have_populated_dt()) + gic_init(0, GIC_PPI_START, MSM_QGIC_DIST_BASE, + (void *)MSM_QGIC_CPU_BASE); +#ifdef CONFIG_OF + else + of_irq_init(msm_dt_gic_match); +#endif /* Edge trigger PPIs except AVS_SVICINT and AVS_SVICINTSWDONE */ writel(0xFFFFD7FF, MSM_QGIC_DIST_BASE + GIC_DIST_CONFIG + 4); @@ -73,16 +86,8 @@ static struct of_dev_auxdata msm_auxdata_lookup[] __initdata = { {} }; -static struct of_device_id msm_dt_gic_match[] __initdata = { - { .compatible = "qcom,msm-8660-qgic", }, - {} -}; - static void __init msm8x60_dt_init(void) { - irq_domain_generate_simple(msm_dt_gic_match, MSM8X60_QGIC_DIST_PHYS, - GIC_SPI_START); - if (of_machine_is_compatible("qcom,msm8660-surf")) { printk(KERN_INFO "Init surf UART registers\n"); msm8x60_init_uart12dm(); From d643bdca8ab9cd333da1b68267d0e47328e56f56 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Mon, 23 Apr 2012 16:29:18 -0700 Subject: [PATCH 134/365] asm-generic: Allow overriding clock_t and add attributes to siginfo_t For the particular issue of x32, which shares code with i386 in the handling of compat_siginfo_t, the use of a 64-bit clock_t bumps the sigchld structure out of alignment, which triggers a messy cascade of padding. This was already handled on the kernel compat side, but it needs handling on the user space side, which uses the generic header. To make that possible: 1. Allow __kernel_clock_t to be overridden in struct siginfo; 2. Allow there to be attributes added to struct siginfo. Reported-by: H.J. Lu Cc: Bruce J. Beare Cc: Arnd Bergmann Link: http://lkml.kernel.org/r/CAMe9rOqF6Kh6-NK7oP0Fpzkd4SBAWU%2BG53hwBbSD4iA2UzyxuA@mail.gmail.com Signed-off-by: H. Peter Anvin --- include/asm-generic/siginfo.h | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/include/asm-generic/siginfo.h b/include/asm-generic/siginfo.h index 0dd4e87f6fba..5e5e3865f1ed 100644 --- a/include/asm-generic/siginfo.h +++ b/include/asm-generic/siginfo.h @@ -35,6 +35,14 @@ typedef union sigval { #define __ARCH_SI_BAND_T long #endif +#ifndef __ARCH_SI_CLOCK_T +#define __ARCH_SI_CLOCK_T __kernel_clock_t +#endif + +#ifndef __ARCH_SI_ATTRIBUTES +#define __ARCH_SI_ATTRIBUTES +#endif + #ifndef HAVE_ARCH_SIGINFO_T typedef struct siginfo { @@ -72,8 +80,8 @@ typedef struct siginfo { __kernel_pid_t _pid; /* which child */ __ARCH_SI_UID_T _uid; /* sender's uid */ int _status; /* exit code */ - __kernel_clock_t _utime; - __kernel_clock_t _stime; + __ARCH_SI_CLOCK_T _utime; + __ARCH_SI_CLOCK_T _stime; } _sigchld; /* SIGILL, SIGFPE, SIGSEGV, SIGBUS */ @@ -91,7 +99,7 @@ typedef struct siginfo { int _fd; } _sigpoll; } _sifields; -} siginfo_t; +} __ARCH_SI_ATTRIBUTES siginfo_t; #endif From 89b8835ec865dddd6673a8dd7003581bf2377176 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Mon, 23 Apr 2012 16:34:12 -0700 Subject: [PATCH 135/365] x32, siginfo: Provide proper overrides for x32 siginfo_t Provide the proper override macros for x32 siginfo_t. The combination of a special type here and an overall alignment constraint actually ends up with all the types being properly aligned, but the hack is needed to keep the substructures inside siginfo_t from adding padding. Note: use __attribute__((aligned())) since __aligned() is not exported to user space. [ v2: fix stray semicolon ] Reported-by: H.J. Lu Cc: Bruce J. Beare Cc: Arnd Bergmann Link: http://lkml.kernel.org/r/CAMe9rOqF6Kh6-NK7oP0Fpzkd4SBAWU%2BG53hwBbSD4iA2UzyxuA@mail.gmail.com Signed-off-by: H. Peter Anvin --- arch/x86/include/asm/siginfo.h | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/arch/x86/include/asm/siginfo.h b/arch/x86/include/asm/siginfo.h index fc1aa5535646..34c47b3341c0 100644 --- a/arch/x86/include/asm/siginfo.h +++ b/arch/x86/include/asm/siginfo.h @@ -2,7 +2,13 @@ #define _ASM_X86_SIGINFO_H #ifdef __x86_64__ -# define __ARCH_SI_PREAMBLE_SIZE (4 * sizeof(int)) +# ifdef __ILP32__ /* x32 */ +typedef long long __kernel_si_clock_t __attribute__((aligned(4))); +# define __ARCH_SI_CLOCK_T __kernel_si_clock_t +# define __ARCH_SI_ATTRIBUTES __attribute__((aligned(8))) +# else /* x86-64 */ +# define __ARCH_SI_PREAMBLE_SIZE (4 * sizeof(int)) +# endif #endif #include From 99aa78466777083255b876293e9e83dec7cd809a Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Fri, 13 Apr 2012 10:27:35 +0800 Subject: [PATCH 136/365] jbd2: use GFP_NOFS for blkdev_issue_flush flush request is issued in transaction commit code path, so looks using GFP_KERNEL to allocate memory for flush request bio falls into the classic deadlock issue. I saw btrfs and dm get it right, but ext4, xfs and md are using GFP. Signed-off-by: Shaohua Li Signed-off-by: Theodore Ts'o Reviewed-by: Jan Kara Cc: stable@vger.kernel.org --- fs/jbd2/commit.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/jbd2/commit.c b/fs/jbd2/commit.c index 806525a7269c..840f70f50792 100644 --- a/fs/jbd2/commit.c +++ b/fs/jbd2/commit.c @@ -723,7 +723,7 @@ start_journal_io: if (commit_transaction->t_need_data_flush && (journal->j_fs_dev != journal->j_dev) && (journal->j_flags & JBD2_BARRIER)) - blkdev_issue_flush(journal->j_fs_dev, GFP_KERNEL, NULL); + blkdev_issue_flush(journal->j_fs_dev, GFP_NOFS, NULL); /* Done it all: now write the commit record asynchronously. */ if (JBD2_HAS_INCOMPAT_FEATURE(journal, @@ -859,7 +859,7 @@ wait_for_iobuf: if (JBD2_HAS_INCOMPAT_FEATURE(journal, JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT) && journal->j_flags & JBD2_BARRIER) { - blkdev_issue_flush(journal->j_dev, GFP_KERNEL, NULL); + blkdev_issue_flush(journal->j_dev, GFP_NOFS, NULL); } if (err) From db7e5c668e1b16061fe2d94d3cba022dd360c5d4 Mon Sep 17 00:00:00 2001 From: Eldad Zack Date: Sun, 22 Apr 2012 17:50:52 +0200 Subject: [PATCH 137/365] super.c: unused variable warning without CONFIG_QUOTA MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit sb info is only checked with quota support. fs/ext4/super.c: In function ‘parse_options’: fs/ext4/super.c:1600:23: warning: unused variable ‘sbi’ [-Wunused-variable] Signed-off-by: Eldad Zack Signed-off-by: Theodore Ts'o --- fs/ext4/super.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 6da193564e43..e1fb1d5de58e 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -1597,7 +1597,9 @@ static int parse_options(char *options, struct super_block *sb, unsigned int *journal_ioprio, int is_remount) { +#ifdef CONFIG_QUOTA struct ext4_sb_info *sbi = EXT4_SB(sb); +#endif char *p; substring_t args[MAX_OPT_ARGS]; int token; From a881e963c7fe1f226e991ee9bbe8907acda93294 Mon Sep 17 00:00:00 2001 From: "Peter Huang (Peng)" Date: Thu, 19 Apr 2012 20:12:51 +0000 Subject: [PATCH 138/365] set fake_rtable's dst to NULL to avoid kernel Oops bridge: set fake_rtable's dst to NULL to avoid kernel Oops when bridge is deleted before tap/vif device's delete, kernel may encounter an oops because of NULL reference to fake_rtable's dst. Set fake_rtable's dst to NULL before sending packets out can solve this problem. v4 reformat, change br_drop_fake_rtable(skb) to {} v3 enrich commit header v2 introducing new flag DST_FAKE_RTABLE to dst_entry struct. [ Use "do { } while (0)" for nop br_drop_fake_rtable() implementation -DaveM ] Acked-by: Eric Dumazet Signed-off-by: Peter Huang Signed-off-by: David S. Miller --- include/linux/netfilter_bridge.h | 9 +++++++++ include/net/dst.h | 1 + net/bridge/br_forward.c | 1 + net/bridge/br_netfilter.c | 8 ++------ 4 files changed, 13 insertions(+), 6 deletions(-) diff --git a/include/linux/netfilter_bridge.h b/include/linux/netfilter_bridge.h index 0ddd161f3b06..31d2844e6572 100644 --- a/include/linux/netfilter_bridge.h +++ b/include/linux/netfilter_bridge.h @@ -104,9 +104,18 @@ struct bridge_skb_cb { } daddr; }; +static inline void br_drop_fake_rtable(struct sk_buff *skb) +{ + struct dst_entry *dst = skb_dst(skb); + + if (dst && (dst->flags & DST_FAKE_RTABLE)) + skb_dst_drop(skb); +} + #else #define nf_bridge_maybe_copy_header(skb) (0) #define nf_bridge_pad(skb) (0) +#define br_drop_fake_rtable(skb) do { } while (0) #endif /* CONFIG_BRIDGE_NETFILTER */ #endif /* __KERNEL__ */ diff --git a/include/net/dst.h b/include/net/dst.h index ff4da42fcfc6..bed833d9796a 100644 --- a/include/net/dst.h +++ b/include/net/dst.h @@ -59,6 +59,7 @@ struct dst_entry { #define DST_NOCACHE 0x0010 #define DST_NOCOUNT 0x0020 #define DST_NOPEER 0x0040 +#define DST_FAKE_RTABLE 0x0080 short error; short obsolete; diff --git a/net/bridge/br_forward.c b/net/bridge/br_forward.c index 61f65344e711..a2098e3de500 100644 --- a/net/bridge/br_forward.c +++ b/net/bridge/br_forward.c @@ -47,6 +47,7 @@ int br_dev_queue_push_xmit(struct sk_buff *skb) kfree_skb(skb); } else { skb_push(skb, ETH_HLEN); + br_drop_fake_rtable(skb); dev_queue_xmit(skb); } diff --git a/net/bridge/br_netfilter.c b/net/bridge/br_netfilter.c index dec4f3817133..d7f49b63ab0f 100644 --- a/net/bridge/br_netfilter.c +++ b/net/bridge/br_netfilter.c @@ -156,7 +156,7 @@ void br_netfilter_rtable_init(struct net_bridge *br) rt->dst.dev = br->dev; rt->dst.path = &rt->dst; dst_init_metrics(&rt->dst, br_dst_default_metrics, true); - rt->dst.flags = DST_NOXFRM | DST_NOPEER; + rt->dst.flags = DST_NOXFRM | DST_NOPEER | DST_FAKE_RTABLE; rt->dst.ops = &fake_dst_ops; } @@ -694,11 +694,7 @@ static unsigned int br_nf_local_in(unsigned int hook, struct sk_buff *skb, const struct net_device *out, int (*okfn)(struct sk_buff *)) { - struct rtable *rt = skb_rtable(skb); - - if (rt && rt == bridge_parent_rtable(in)) - skb_dst_drop(skb); - + br_drop_fake_rtable(skb); return NF_ACCEPT; } From 9bbf56609d304e8aae2076610d938206453035de Mon Sep 17 00:00:00 2001 From: Stephane Fillod Date: Fri, 20 Apr 2012 09:39:23 +0000 Subject: [PATCH 139/365] net: usb: smsc95xx: fix mtu Make smsc95xx recalculate the hard_mtu after adjusting the hard_header_len. Without this, usbnet adjusts the MTU down to 1488 bytes, and the host is unable to receive standard 1500-byte frames from the device. Inspired by same fix on cdc_eem 78fb72f7936c01d5b426c03a691eca082b03f2b9. Tested on ARM/Beagle. Signed-off-by: Stephane Fillod Signed-off-by: David S. Miller --- drivers/net/usb/smsc95xx.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c index 5f19f84d3494..53a1ba5e0c2c 100644 --- a/drivers/net/usb/smsc95xx.c +++ b/drivers/net/usb/smsc95xx.c @@ -1017,6 +1017,7 @@ static int smsc95xx_bind(struct usbnet *dev, struct usb_interface *intf) dev->net->ethtool_ops = &smsc95xx_ethtool_ops; dev->net->flags |= IFF_MULTICAST; dev->net->hard_header_len += SMSC95XX_TX_OVERHEAD_CSUM; + dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len; return 0; } From 7e665afbb561544d6fcc3334285db5809a38d2c8 Mon Sep 17 00:00:00 2001 From: Ursula Braun Date: Sun, 22 Apr 2012 21:21:41 +0000 Subject: [PATCH 140/365] qeth: allow change of blkt default values There exist qeth sysfs blkt attributes to change the default blkt values. But blkt changes are reset during online setting due to a 2nd invocation of qeth_determine_capabilites(). This patch makes sure blkt default values are configured during 1st run of qeth_determine_capabilities() only. Thus blkt changes are kept during online setting. Signed-off-by: Ursula Braun Reported-by: Horst Hartmann Signed-off-by: Frank Blaschka Signed-off-by: David S. Miller --- drivers/s390/net/qeth_core_main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index 120955c66410..d78d0cedf637 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -4540,7 +4540,8 @@ static void qeth_determine_capabilities(struct qeth_card *card) goto out_offline; } qeth_configure_unitaddr(card, prcd); - qeth_configure_blkt_default(card, prcd); + if (ddev_offline) + qeth_configure_blkt_default(card, prcd); kfree(prcd); rc = qdio_get_ssqd_desc(ddev, &card->ssqd); From e6e056baa24b48642b86129e8a3fdaa98f2fe947 Mon Sep 17 00:00:00 2001 From: Stefan Raspl Date: Sun, 22 Apr 2012 21:21:42 +0000 Subject: [PATCH 141/365] qeth: Use blkt defaults for OSA Express 4 The previous blkt defaults for OSA Express 4 cards produced inadequate performance for streaming workloads. The present patch will apply a set of more appropriate defaults. Signed-off-by: Stefan Raspl Reviewed-by: Ursula Braun Signed-off-by: Frank Blaschka Signed-off-by: David S. Miller --- drivers/s390/net/qeth_core_main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index d78d0cedf637..8334dadc681d 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -1672,7 +1672,8 @@ static void qeth_configure_blkt_default(struct qeth_card *card, char *prcd) { QETH_DBF_TEXT(SETUP, 2, "cfgblkt"); - if (prcd[74] == 0xF0 && prcd[75] == 0xF0 && prcd[76] == 0xF5) { + if (prcd[74] == 0xF0 && prcd[75] == 0xF0 && + (prcd[76] == 0xF5 || prcd[76] == 0xF6)) { card->info.blkt.time_total = 250; card->info.blkt.inter_packet = 5; card->info.blkt.inter_packet_jumbo = 15; From c2f1244b86492b6cc89202f3f9ed43c88fb3e79d Mon Sep 17 00:00:00 2001 From: Thadeu Lima de Souza Cascardo Date: Mon, 23 Apr 2012 03:46:29 +0000 Subject: [PATCH 142/365] ehea: only register irq after setting up ports If we receive an interrupt too early before we set up ports in the probe function, there won't be any port ready to handle it. Only registering the irq after the ports are setup fixes the problem, and works fine without losing any interrupts. This causes crashes in some situations: [c000000f7ff7fd60] d000000008e223f0 .ehea_neq_tasklet+0x78/0x148 [ehea] [c000000f7ff7fe00] c0000000000b6cac .tasklet_hi_action+0xdc/0x210 [c000000f7ff7fea0] c0000000000b7cc8 .__do_softirq+0x178/0x300 [c000000f7ff7ff90] c000000000022694 .call_do_softirq+0x14/0x24 [c000000f68ee7900] c000000000010e04 .do_softirq+0xec/0x110 [c000000f68ee79a0] c0000000000b789c .irq_exit+0xac/0xe0 [c000000f68ee7a20] c0000000000110bc .do_IRQ+0x114/0x2a8 [c000000f68ee7ae0] c00000000000553c hardware_interrupt_entry+0x18/0x1c Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/ehea/ehea_main.c | 30 ++++++++++++++--------- 1 file changed, 18 insertions(+), 12 deletions(-) diff --git a/drivers/net/ethernet/ibm/ehea/ehea_main.c b/drivers/net/ethernet/ibm/ehea/ehea_main.c index 3516e17a399d..acf34b671547 100644 --- a/drivers/net/ethernet/ibm/ehea/ehea_main.c +++ b/drivers/net/ethernet/ibm/ehea/ehea_main.c @@ -3261,6 +3261,7 @@ static int __devinit ehea_probe_adapter(struct platform_device *dev, struct ehea_adapter *adapter; const u64 *adapter_handle; int ret; + int i; if (!dev || !dev->dev.of_node) { pr_err("Invalid ibmebus device probed\n"); @@ -3314,17 +3315,9 @@ static int __devinit ehea_probe_adapter(struct platform_device *dev, tasklet_init(&adapter->neq_tasklet, ehea_neq_tasklet, (unsigned long)adapter); - ret = ibmebus_request_irq(adapter->neq->attr.ist1, - ehea_interrupt_neq, IRQF_DISABLED, - "ehea_neq", adapter); - if (ret) { - dev_err(&dev->dev, "requesting NEQ IRQ failed\n"); - goto out_kill_eq; - } - ret = ehea_create_device_sysfs(dev); if (ret) - goto out_free_irq; + goto out_kill_eq; ret = ehea_setup_ports(adapter); if (ret) { @@ -3332,15 +3325,28 @@ static int __devinit ehea_probe_adapter(struct platform_device *dev, goto out_rem_dev_sysfs; } + ret = ibmebus_request_irq(adapter->neq->attr.ist1, + ehea_interrupt_neq, IRQF_DISABLED, + "ehea_neq", adapter); + if (ret) { + dev_err(&dev->dev, "requesting NEQ IRQ failed\n"); + goto out_shutdown_ports; + } + + ret = 0; goto out; +out_shutdown_ports: + for (i = 0; i < EHEA_MAX_PORTS; i++) + if (adapter->port[i]) { + ehea_shutdown_single_port(adapter->port[i]); + adapter->port[i] = NULL; + } + out_rem_dev_sysfs: ehea_remove_device_sysfs(dev); -out_free_irq: - ibmebus_free_irq(adapter->neq->attr.ist1, adapter); - out_kill_eq: ehea_destroy_eq(adapter->neq); From 1ab8be4a14409c55050db69271631afebac29b5a Mon Sep 17 00:00:00 2001 From: Anatolij Gustschin Date: Mon, 23 Apr 2012 12:06:43 +0000 Subject: [PATCH 143/365] net/davinci_emac: fix failing PHY connect attempts PHY connect attempts fail if no PHY id is specified in the emac platform data and another mdio bus has been registered before 'davinci_mdio' bus. In this case when configuring the interface, there will be an attempt to connect to already attached PHY on the previously registered mdio bus: net eth1: PHY already attached net eth1: could not connect to phy smsc911x-0:01 IP-Config: Failed to open eth1 IP-Config: Device `eth1' not found Fix this by modifying match_first_device() to match first PHY device on 'davinci_mdio' bus. Signed-off-by: Anatolij Gustschin Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/davinci_emac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c index 174a3348f676..08aff1a2087c 100644 --- a/drivers/net/ethernet/ti/davinci_emac.c +++ b/drivers/net/ethernet/ti/davinci_emac.c @@ -1511,7 +1511,7 @@ static int emac_devioctl(struct net_device *ndev, struct ifreq *ifrq, int cmd) static int match_first_device(struct device *dev, void *data) { - return 1; + return !strncmp(dev_name(dev), "davinci_mdio", 12); } /** From 2a5809499e35b53a6044fd34e72b242688b7a862 Mon Sep 17 00:00:00 2001 From: Ingo van Lil Date: Mon, 23 Apr 2012 22:05:38 +0000 Subject: [PATCH 144/365] asix: Fix tx transfer padding for full-speed USB The asix.c USB Ethernet driver avoids ending a tx transfer with a zero- length packet by appending a four-byte padding to transfers whose length is a multiple of maxpacket. However, the hard-coded 512 byte maxpacket length is valid for high-speed USB only; full-speed USB uses 64 byte packets. Signed-off-by: Ingo van Lil Signed-off-by: David S. Miller --- drivers/net/usb/asix.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c index 5ee032cafade..42b5151aa78a 100644 --- a/drivers/net/usb/asix.c +++ b/drivers/net/usb/asix.c @@ -355,7 +355,7 @@ static struct sk_buff *asix_tx_fixup(struct usbnet *dev, struct sk_buff *skb, u32 packet_len; u32 padbytes = 0xffff0000; - padlen = ((skb->len + 4) % 512) ? 0 : 4; + padlen = ((skb->len + 4) & (dev->maxpacket - 1)) ? 0 : 4; if ((!skb_cloned(skb)) && ((headroom + tailroom) >= (4 + padlen))) { @@ -377,7 +377,7 @@ static struct sk_buff *asix_tx_fixup(struct usbnet *dev, struct sk_buff *skb, cpu_to_le32s(&packet_len); skb_copy_to_linear_data(skb, &packet_len, sizeof(packet_len)); - if ((skb->len % 512) == 0) { + if (padlen) { cpu_to_le32s(&padbytes); memcpy(skb_tail_pointer(skb), &padbytes, sizeof(padbytes)); skb_put(skb, sizeof(padbytes)); From 4c569a72c30dfee9b5133284aba67e3aa0c9505d Mon Sep 17 00:00:00 2001 From: Bob Peterson Date: Tue, 10 Apr 2012 14:45:24 -0400 Subject: [PATCH 145/365] GFS2: Instruct DLM to avoid queue convert slowdown This patch instructs DLM to prevent an "in place" conversion, where the lock just stays on the granted queue, and instead forces the conversion to the back of the convert queue. This is done on upward conversions only. This is useful in cases where, for example, a lock is frequently needed in PR on one node, but another node needs it temporarily in EX to update it. This may happen, for example, when the rindex is being updated by gfs2_grow. The gfs2_grow needs to have the lock in EX, but the other nodes need to re-read it to retrieve the updates. The glock is already granted in PR on the non-growing nodes, so this prevents them from continually re-granting the lock in PR, and forces the EX from gfs2_grow to go through. Signed-off-by: Bob Peterson Signed-off-by: Steven Whitehouse --- fs/gfs2/lock_dlm.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/fs/gfs2/lock_dlm.c b/fs/gfs2/lock_dlm.c index f8411bd1b805..5f5e70e047dc 100644 --- a/fs/gfs2/lock_dlm.c +++ b/fs/gfs2/lock_dlm.c @@ -200,10 +200,11 @@ static int make_mode(const unsigned int lmstate) return -1; } -static u32 make_flags(const u32 lkid, const unsigned int gfs_flags, +static u32 make_flags(struct gfs2_glock *gl, const unsigned int gfs_flags, const int req) { u32 lkf = DLM_LKF_VALBLK; + u32 lkid = gl->gl_lksb.sb_lkid; if (gfs_flags & LM_FLAG_TRY) lkf |= DLM_LKF_NOQUEUE; @@ -227,8 +228,11 @@ static u32 make_flags(const u32 lkid, const unsigned int gfs_flags, BUG(); } - if (lkid != 0) + if (lkid != 0) { lkf |= DLM_LKF_CONVERT; + if (test_bit(GLF_BLOCKING, &gl->gl_flags)) + lkf |= DLM_LKF_QUECVT; + } return lkf; } @@ -250,7 +254,7 @@ static int gdlm_lock(struct gfs2_glock *gl, unsigned int req_state, char strname[GDLM_STRNAME_BYTES] = ""; req = make_mode(req_state); - lkf = make_flags(gl->gl_lksb.sb_lkid, flags, req); + lkf = make_flags(gl, flags, req); gfs2_glstats_inc(gl, GFS2_LKS_DCOUNT); gfs2_sbstats_inc(gl, GFS2_LKS_DCOUNT); if (gl->gl_lksb.sb_lkid) { From 16cde9931bcd8d8ca968ef1cded02684ea040374 Mon Sep 17 00:00:00 2001 From: Szymon Janc Date: Fri, 13 Apr 2012 12:32:42 +0200 Subject: [PATCH 146/365] Bluetooth: Fix missing break in hci_cmd_complete_evt Command complete event for HCI_OP_USER_PASSKEY_NEG_REPLY would result in calling handler function also for HCI_OP_LE_SET_SCAN_PARAM. This could result in undefined behaviour. Signed-off-by: Szymon Janc Signed-off-by: Gustavo Padovan --- net/bluetooth/hci_event.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c index 6a72eaea70ee..7f87a70b8618 100644 --- a/net/bluetooth/hci_event.c +++ b/net/bluetooth/hci_event.c @@ -2314,6 +2314,7 @@ static inline void hci_cmd_complete_evt(struct hci_dev *hdev, struct sk_buff *sk case HCI_OP_USER_PASSKEY_NEG_REPLY: hci_cc_user_passkey_neg_reply(hdev, skb); + break; case HCI_OP_LE_SET_SCAN_PARAM: hci_cc_le_set_scan_param(hdev, skb); From 985140369be1e886754d8ac0375dd64e4f727311 Mon Sep 17 00:00:00 2001 From: Steven Harms Date: Fri, 13 Apr 2012 14:45:55 -0400 Subject: [PATCH 147/365] Add Foxconn / Hon Hai IDs for btusb module This change adds 0x0489:0xe033 to the btusb module. This bluetooth usb device is integrated in the Acer TimelineX AS4830TG-6808 notebook. Output from /sys/kernel/debug/usb/devices: T: Bus=01 Lev=02 Prnt=02 Port=05 Cnt=02 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e033 Rev= 2.29 S: Manufacturer=Broadcom Corp S: Product=Acer Module S: SerialNumber=60D819F74101 C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 32 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 32 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 64 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 64 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) Signed-off-by: Steven Harms Signed-off-by: Gustavo Padovan --- drivers/bluetooth/btusb.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 93cc828298c4..9217121362e1 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -108,6 +108,9 @@ static struct usb_device_id btusb_table[] = { { USB_DEVICE(0x0a5c, 0x21f3) }, { USB_DEVICE(0x413c, 0x8197) }, + /* Foxconn - Hon Hai */ + { USB_DEVICE(0x0489, 0xe033) }, + { } /* Terminating entry */ }; From 3c7c87fd5bd71f57c68a64d11a15170d0dc4f7aa Mon Sep 17 00:00:00 2001 From: Sachin Prabhu Date: Tue, 24 Apr 2012 15:28:14 +0100 Subject: [PATCH 148/365] CIFS: Show backupuid/gid in /proc/mounts Show backupuid/backupgid in /proc/mounts for cifs shares mounted with the backupuid/backupgid feature. Also consolidate the two separate checks for pvolume_info->backupuid_specified into a single if condition in cifs_setup_cifs_sb(). Signed-off-by: Sachin Prabhu Reviewed-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/cifsfs.c | 4 ++++ fs/cifs/connect.c | 12 ++++++------ 2 files changed, 10 insertions(+), 6 deletions(-) diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index d34212822444..ea8eb92b65b4 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -434,6 +434,10 @@ cifs_show_options(struct seq_file *s, struct dentry *root) seq_printf(s, ",noperm"); if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_STRICT_IO) seq_printf(s, ",strictcache"); + if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_BACKUPUID) + seq_printf(s, ",backupuid=%u", cifs_sb->mnt_backupuid); + if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_BACKUPGID) + seq_printf(s, ",backupgid=%u", cifs_sb->mnt_backupgid); seq_printf(s, ",rsize=%d", cifs_sb->rsize); seq_printf(s, ",wsize=%d", cifs_sb->wsize); diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index f31dc9ac37b7..f4d381e331ce 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -3228,10 +3228,6 @@ void cifs_setup_cifs_sb(struct smb_vol *pvolume_info, cifs_sb->mnt_uid = pvolume_info->linux_uid; cifs_sb->mnt_gid = pvolume_info->linux_gid; - if (pvolume_info->backupuid_specified) - cifs_sb->mnt_backupuid = pvolume_info->backupuid; - if (pvolume_info->backupgid_specified) - cifs_sb->mnt_backupgid = pvolume_info->backupgid; cifs_sb->mnt_file_mode = pvolume_info->file_mode; cifs_sb->mnt_dir_mode = pvolume_info->dir_mode; cFYI(1, "file mode: 0x%hx dir mode: 0x%hx", @@ -3262,10 +3258,14 @@ void cifs_setup_cifs_sb(struct smb_vol *pvolume_info, cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_RWPIDFORWARD; if (pvolume_info->cifs_acl) cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_CIFS_ACL; - if (pvolume_info->backupuid_specified) + if (pvolume_info->backupuid_specified) { cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_CIFS_BACKUPUID; - if (pvolume_info->backupgid_specified) + cifs_sb->mnt_backupuid = pvolume_info->backupuid; + } + if (pvolume_info->backupgid_specified) { cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_CIFS_BACKUPGID; + cifs_sb->mnt_backupgid = pvolume_info->backupgid; + } if (pvolume_info->override_uid) cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_OVERR_UID; if (pvolume_info->override_gid) From 28f8881023c9713c303c0feda270929f9384c019 Mon Sep 17 00:00:00 2001 From: Sachin Prabhu Date: Tue, 24 Apr 2012 15:28:30 +0100 Subject: [PATCH 149/365] Use correct conversion specifiers in cifs_show_options cifs_show_options uses the wrong conversion specifier for uid, gid, rsize & wsize. Correct this to %u to match it to the variable type 'unsigned integer'. Signed-off-by: Sachin Prabhu Reviewed-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/cifsfs.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index ea8eb92b65b4..811245b1ff2e 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -370,13 +370,13 @@ cifs_show_options(struct seq_file *s, struct dentry *root) (int)(srcaddr->sa_family)); } - seq_printf(s, ",uid=%d", cifs_sb->mnt_uid); + seq_printf(s, ",uid=%u", cifs_sb->mnt_uid); if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_OVERR_UID) seq_printf(s, ",forceuid"); else seq_printf(s, ",noforceuid"); - seq_printf(s, ",gid=%d", cifs_sb->mnt_gid); + seq_printf(s, ",gid=%u", cifs_sb->mnt_gid); if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_OVERR_GID) seq_printf(s, ",forcegid"); else @@ -439,8 +439,8 @@ cifs_show_options(struct seq_file *s, struct dentry *root) if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_BACKUPGID) seq_printf(s, ",backupgid=%u", cifs_sb->mnt_backupgid); - seq_printf(s, ",rsize=%d", cifs_sb->rsize); - seq_printf(s, ",wsize=%d", cifs_sb->wsize); + seq_printf(s, ",rsize=%u", cifs_sb->rsize); + seq_printf(s, ",wsize=%u", cifs_sb->wsize); /* convert actimeo and display it in seconds */ seq_printf(s, ",actimeo=%lu", cifs_sb->actimeo / HZ); From 5ef4acd58ab2abd0dd0c8e3cacd61a0dc5d73646 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 23 Apr 2012 14:17:50 -0700 Subject: [PATCH 150/365] iwlwifi: fix hardware queue programming Newer devices have 20 (5000 series) or 30 (6000 series) hardware queues, rather than the 16 that 4965 had. This was added to the driver a long time ago, but improperly: the queue registers for the higher queues aren't just continuations of the registers for the first 16 queues, they are in other places. Therefore, the hardware would lock up when trying to activate queue 16 or above and the device would have to be restarted. Thanks goes to Emmanuel who identified this and told me how the queue programming should be done. Note that we don't use queues 20 and higher today and doing so needs more work than this. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg Signed-off-by: Wey-Yi Guy Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-fh.h | 22 ++++++++++++++++---- drivers/net/wireless/iwlwifi/iwl-prph.h | 27 ++++++++++++++++++++++--- 2 files changed, 42 insertions(+), 7 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-fh.h b/drivers/net/wireless/iwlwifi/iwl-fh.h index 90208094b8eb..74bce97a8600 100644 --- a/drivers/net/wireless/iwlwifi/iwl-fh.h +++ b/drivers/net/wireless/iwlwifi/iwl-fh.h @@ -104,15 +104,29 @@ * (see struct iwl_tfd_frame). These 16 pointer registers are offset by 0x04 * bytes from one another. Each TFD circular buffer in DRAM must be 256-byte * aligned (address bits 0-7 must be 0). + * Later devices have 20 (5000 series) or 30 (higher) queues, but the registers + * for them are in different places. * * Bit fields in each pointer register: * 27-0: TFD CB physical base address [35:8], must be 256-byte aligned */ -#define FH_MEM_CBBC_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0x9D0) -#define FH_MEM_CBBC_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xA10) +#define FH_MEM_CBBC_0_15_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0x9D0) +#define FH_MEM_CBBC_0_15_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xA10) +#define FH_MEM_CBBC_16_19_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xBF0) +#define FH_MEM_CBBC_16_19_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xC00) +#define FH_MEM_CBBC_20_31_LOWER_BOUND (FH_MEM_LOWER_BOUND + 0xB20) +#define FH_MEM_CBBC_20_31_UPPER_BOUND (FH_MEM_LOWER_BOUND + 0xB80) -/* Find TFD CB base pointer for given queue (range 0-15). */ -#define FH_MEM_CBBC_QUEUE(x) (FH_MEM_CBBC_LOWER_BOUND + (x) * 0x4) +/* Find TFD CB base pointer for given queue */ +static inline unsigned int FH_MEM_CBBC_QUEUE(unsigned int chnl) +{ + if (chnl < 16) + return FH_MEM_CBBC_0_15_LOWER_BOUND + 4 * chnl; + if (chnl < 20) + return FH_MEM_CBBC_16_19_LOWER_BOUND + 4 * (chnl - 16); + WARN_ON_ONCE(chnl >= 32); + return FH_MEM_CBBC_20_31_LOWER_BOUND + 4 * (chnl - 20); +} /** diff --git a/drivers/net/wireless/iwlwifi/iwl-prph.h b/drivers/net/wireless/iwlwifi/iwl-prph.h index 75dc20bd965b..3b1069290fa9 100644 --- a/drivers/net/wireless/iwlwifi/iwl-prph.h +++ b/drivers/net/wireless/iwlwifi/iwl-prph.h @@ -223,12 +223,33 @@ #define SCD_AIT (SCD_BASE + 0x0c) #define SCD_TXFACT (SCD_BASE + 0x10) #define SCD_ACTIVE (SCD_BASE + 0x14) -#define SCD_QUEUE_WRPTR(x) (SCD_BASE + 0x18 + (x) * 4) -#define SCD_QUEUE_RDPTR(x) (SCD_BASE + 0x68 + (x) * 4) #define SCD_QUEUECHAIN_SEL (SCD_BASE + 0xe8) #define SCD_AGGR_SEL (SCD_BASE + 0x248) #define SCD_INTERRUPT_MASK (SCD_BASE + 0x108) -#define SCD_QUEUE_STATUS_BITS(x) (SCD_BASE + 0x10c + (x) * 4) + +static inline unsigned int SCD_QUEUE_WRPTR(unsigned int chnl) +{ + if (chnl < 20) + return SCD_BASE + 0x18 + chnl * 4; + WARN_ON_ONCE(chnl >= 32); + return SCD_BASE + 0x284 + (chnl - 20) * 4; +} + +static inline unsigned int SCD_QUEUE_RDPTR(unsigned int chnl) +{ + if (chnl < 20) + return SCD_BASE + 0x68 + chnl * 4; + WARN_ON_ONCE(chnl >= 32); + return SCD_BASE + 0x2B4 + (chnl - 20) * 4; +} + +static inline unsigned int SCD_QUEUE_STATUS_BITS(unsigned int chnl) +{ + if (chnl < 20) + return SCD_BASE + 0x10c + chnl * 4; + WARN_ON_ONCE(chnl >= 32); + return SCD_BASE + 0x384 + (chnl - 20) * 4; +} /*********************** END TX SCHEDULER *************************************/ From 78cbcf2b9dbe0565820dc7721316f9c401000a68 Mon Sep 17 00:00:00 2001 From: Meenakshi Venkataraman Date: Sun, 22 Apr 2012 07:55:27 -0700 Subject: [PATCH 151/365] iwlwifi: use correct released ucode version Report correctly the latest released version of the iwlwifi firmware for all iwlwifi-supported devices. Cc: stable@vger.kernel.org #3.3+ Signed-off-by: Meenakshi Venkataraman Signed-off-by: Wey-Yi Guy Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-1000.c | 8 ++++---- drivers/net/wireless/iwlwifi/iwl-2000.c | 16 ++++++++-------- drivers/net/wireless/iwlwifi/iwl-5000.c | 11 +++++++++-- drivers/net/wireless/iwlwifi/iwl-6000.c | 10 ++++++---- 4 files changed, 27 insertions(+), 18 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-1000.c b/drivers/net/wireless/iwlwifi/iwl-1000.c index 5b0d888f746b..8d80e233bc7a 100644 --- a/drivers/net/wireless/iwlwifi/iwl-1000.c +++ b/drivers/net/wireless/iwlwifi/iwl-1000.c @@ -46,8 +46,8 @@ #include "iwl-prph.h" /* Highest firmware API version supported */ -#define IWL1000_UCODE_API_MAX 6 -#define IWL100_UCODE_API_MAX 6 +#define IWL1000_UCODE_API_MAX 5 +#define IWL100_UCODE_API_MAX 5 /* Oldest version we won't warn about */ #define IWL1000_UCODE_API_OK 5 @@ -226,5 +226,5 @@ const struct iwl_cfg iwl100_bg_cfg = { IWL_DEVICE_100, }; -MODULE_FIRMWARE(IWL1000_MODULE_FIRMWARE(IWL1000_UCODE_API_MAX)); -MODULE_FIRMWARE(IWL100_MODULE_FIRMWARE(IWL100_UCODE_API_MAX)); +MODULE_FIRMWARE(IWL1000_MODULE_FIRMWARE(IWL1000_UCODE_API_OK)); +MODULE_FIRMWARE(IWL100_MODULE_FIRMWARE(IWL100_UCODE_API_OK)); diff --git a/drivers/net/wireless/iwlwifi/iwl-2000.c b/drivers/net/wireless/iwlwifi/iwl-2000.c index 5635b9e2c69e..ea108622e0bd 100644 --- a/drivers/net/wireless/iwlwifi/iwl-2000.c +++ b/drivers/net/wireless/iwlwifi/iwl-2000.c @@ -51,10 +51,10 @@ #define IWL135_UCODE_API_MAX 6 /* Oldest version we won't warn about */ -#define IWL2030_UCODE_API_OK 5 -#define IWL2000_UCODE_API_OK 5 -#define IWL105_UCODE_API_OK 5 -#define IWL135_UCODE_API_OK 5 +#define IWL2030_UCODE_API_OK 6 +#define IWL2000_UCODE_API_OK 6 +#define IWL105_UCODE_API_OK 6 +#define IWL135_UCODE_API_OK 6 /* Lowest firmware API version supported */ #define IWL2030_UCODE_API_MIN 5 @@ -328,7 +328,7 @@ const struct iwl_cfg iwl135_bgn_cfg = { .ht_params = &iwl2000_ht_params, }; -MODULE_FIRMWARE(IWL2000_MODULE_FIRMWARE(IWL2000_UCODE_API_MAX)); -MODULE_FIRMWARE(IWL2030_MODULE_FIRMWARE(IWL2030_UCODE_API_MAX)); -MODULE_FIRMWARE(IWL105_MODULE_FIRMWARE(IWL105_UCODE_API_MAX)); -MODULE_FIRMWARE(IWL135_MODULE_FIRMWARE(IWL135_UCODE_API_MAX)); +MODULE_FIRMWARE(IWL2000_MODULE_FIRMWARE(IWL2000_UCODE_API_OK)); +MODULE_FIRMWARE(IWL2030_MODULE_FIRMWARE(IWL2030_UCODE_API_OK)); +MODULE_FIRMWARE(IWL105_MODULE_FIRMWARE(IWL105_UCODE_API_OK)); +MODULE_FIRMWARE(IWL135_MODULE_FIRMWARE(IWL135_UCODE_API_OK)); diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c index a805e97b89af..de0920c74cdd 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -51,6 +51,10 @@ #define IWL5000_UCODE_API_MAX 5 #define IWL5150_UCODE_API_MAX 2 +/* Oldest version we won't warn about */ +#define IWL5000_UCODE_API_OK 5 +#define IWL5150_UCODE_API_OK 2 + /* Lowest firmware API version supported */ #define IWL5000_UCODE_API_MIN 1 #define IWL5150_UCODE_API_MIN 1 @@ -326,6 +330,7 @@ static const struct iwl_ht_params iwl5000_ht_params = { #define IWL_DEVICE_5000 \ .fw_name_pre = IWL5000_FW_PRE, \ .ucode_api_max = IWL5000_UCODE_API_MAX, \ + .ucode_api_ok = IWL5000_UCODE_API_OK, \ .ucode_api_min = IWL5000_UCODE_API_MIN, \ .max_inst_size = IWLAGN_RTC_INST_SIZE, \ .max_data_size = IWLAGN_RTC_DATA_SIZE, \ @@ -371,6 +376,7 @@ const struct iwl_cfg iwl5350_agn_cfg = { .name = "Intel(R) WiMAX/WiFi Link 5350 AGN", .fw_name_pre = IWL5000_FW_PRE, .ucode_api_max = IWL5000_UCODE_API_MAX, + .ucode_api_ok = IWL5000_UCODE_API_OK, .ucode_api_min = IWL5000_UCODE_API_MIN, .max_inst_size = IWLAGN_RTC_INST_SIZE, .max_data_size = IWLAGN_RTC_DATA_SIZE, @@ -386,6 +392,7 @@ const struct iwl_cfg iwl5350_agn_cfg = { #define IWL_DEVICE_5150 \ .fw_name_pre = IWL5150_FW_PRE, \ .ucode_api_max = IWL5150_UCODE_API_MAX, \ + .ucode_api_ok = IWL5150_UCODE_API_OK, \ .ucode_api_min = IWL5150_UCODE_API_MIN, \ .max_inst_size = IWLAGN_RTC_INST_SIZE, \ .max_data_size = IWLAGN_RTC_DATA_SIZE, \ @@ -409,5 +416,5 @@ const struct iwl_cfg iwl5150_abg_cfg = { IWL_DEVICE_5150, }; -MODULE_FIRMWARE(IWL5000_MODULE_FIRMWARE(IWL5000_UCODE_API_MAX)); -MODULE_FIRMWARE(IWL5150_MODULE_FIRMWARE(IWL5150_UCODE_API_MAX)); +MODULE_FIRMWARE(IWL5000_MODULE_FIRMWARE(IWL5000_UCODE_API_OK)); +MODULE_FIRMWARE(IWL5150_MODULE_FIRMWARE(IWL5150_UCODE_API_OK)); diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c index 64060cd738b5..b1b69515b1a0 100644 --- a/drivers/net/wireless/iwlwifi/iwl-6000.c +++ b/drivers/net/wireless/iwlwifi/iwl-6000.c @@ -53,6 +53,8 @@ /* Oldest version we won't warn about */ #define IWL6000_UCODE_API_OK 4 #define IWL6000G2_UCODE_API_OK 5 +#define IWL6050_UCODE_API_OK 5 +#define IWL6000G2B_UCODE_API_OK 6 /* Lowest firmware API version supported */ #define IWL6000_UCODE_API_MIN 4 @@ -334,7 +336,7 @@ static const struct iwl_bt_params iwl6000_bt_params = { #define IWL_DEVICE_6005 \ .fw_name_pre = IWL6005_FW_PRE, \ .ucode_api_max = IWL6000G2_UCODE_API_MAX, \ - .ucode_api_ok = IWL6000G2_UCODE_API_OK, \ + .ucode_api_ok = IWL6000G2B_UCODE_API_OK, \ .ucode_api_min = IWL6000G2_UCODE_API_MIN, \ .max_inst_size = IWL60_RTC_INST_SIZE, \ .max_data_size = IWL60_RTC_DATA_SIZE, \ @@ -557,6 +559,6 @@ const struct iwl_cfg iwl6000_3agn_cfg = { }; MODULE_FIRMWARE(IWL6000_MODULE_FIRMWARE(IWL6000_UCODE_API_OK)); -MODULE_FIRMWARE(IWL6050_MODULE_FIRMWARE(IWL6050_UCODE_API_MAX)); -MODULE_FIRMWARE(IWL6005_MODULE_FIRMWARE(IWL6000G2_UCODE_API_MAX)); -MODULE_FIRMWARE(IWL6030_MODULE_FIRMWARE(IWL6000G2_UCODE_API_MAX)); +MODULE_FIRMWARE(IWL6050_MODULE_FIRMWARE(IWL6050_UCODE_API_OK)); +MODULE_FIRMWARE(IWL6005_MODULE_FIRMWARE(IWL6000G2_UCODE_API_OK)); +MODULE_FIRMWARE(IWL6030_MODULE_FIRMWARE(IWL6000G2B_UCODE_API_OK)); From afa762f6871a8cb05fbef5d0f83fac14304aa816 Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Mon, 23 Apr 2012 14:45:15 +0300 Subject: [PATCH 152/365] mac80211: call ieee80211_mgd_stop() on interface stop ieee80211_mgd_teardown() is called on netdev removal, which occurs after the vif was already removed from the low-level driver, resulting in the following warning: [ 4809.014734] ------------[ cut here ]------------ [ 4809.019861] WARNING: at net/mac80211/driver-ops.h:12 ieee80211_bss_info_change_notify+0x200/0x2c8 [mac80211]() [ 4809.030388] wlan0: Failed check-sdata-in-driver check, flags: 0x4 [ 4809.036862] Modules linked in: wlcore_sdio(-) wl12xx wlcore mac80211 cfg80211 [last unloaded: cfg80211] [ 4809.046849] [] (unwind_backtrace+0x0/0x12c) [ 4809.055937] [] (dump_stack+0x20/0x24) [ 4809.065385] [] (warn_slowpath_common+0x5c/0x74) [ 4809.075589] [] (warn_slowpath_fmt+0x40/0x48) [ 4809.088291] [] (ieee80211_bss_info_change_notify+0x200/0x2c8 [mac80211]) [ 4809.102844] [] (ieee80211_destroy_auth_data+0x80/0xa4 [mac80211]) [ 4809.116276] [] (ieee80211_mgd_teardown+0x5c/0x74 [mac80211]) [ 4809.129331] [] (ieee80211_teardown_sdata+0xb0/0xd8 [mac80211]) [ 4809.141595] [] (rollback_registered_many+0x228/0x2f0) [ 4809.153056] [] (unregister_netdevice_many+0x28/0x50) [ 4809.165696] [] (ieee80211_remove_interfaces+0xb4/0xdc [mac80211]) [ 4809.179151] [] (ieee80211_unregister_hw+0x50/0xf0 [mac80211]) [ 4809.191043] [] (wlcore_remove+0x5c/0x7c [wlcore]) [ 4809.201491] [] (platform_drv_remove+0x24/0x28) [ 4809.212029] [] (__device_release_driver+0x8c/0xcc) [ 4809.222738] [] (device_release_driver+0x30/0x3c) [ 4809.233099] [] (bus_remove_device+0x10c/0x128) [ 4809.242620] [] (device_del+0x11c/0x17c) [ 4809.252150] [] (platform_device_del+0x28/0x68) [ 4809.263051] [] (wl1271_remove+0x3c/0x50 [wlcore_sdio]) [ 4809.273590] [] (sdio_bus_remove+0x48/0xf8) [ 4809.283754] [] (__device_release_driver+0x8c/0xcc) [ 4809.293729] [] (driver_detach+0x9c/0xc4) [ 4809.303163] [] (bus_remove_driver+0xc4/0xf4) [ 4809.312973] [] (driver_unregister+0x70/0x7c) [ 4809.323220] [] (sdio_unregister_driver+0x24/0x2c) [ 4809.334213] [] (wl1271_exit+0x14/0x1c [wlcore_sdio]) [ 4809.344930] [] (sys_delete_module+0x228/0x2a8) [ 4809.354734] ---[ end trace 515290ccf5feb522 ]--- Rename ieee80211_mgd_teardown() to ieee80211_mgd_stop(), and call it on ieee80211_do_stop(). Signed-off-by: Eliad Peller Signed-off-by: John W. Linville --- net/mac80211/ieee80211_i.h | 2 +- net/mac80211/iface.c | 4 ++-- net/mac80211/mlme.c | 2 +- 3 files changed, 4 insertions(+), 4 deletions(-) diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index d9798a307f20..db8fae51714c 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1210,7 +1210,7 @@ void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb); void ieee80211_sta_reset_beacon_monitor(struct ieee80211_sub_if_data *sdata); void ieee80211_sta_reset_conn_monitor(struct ieee80211_sub_if_data *sdata); -void ieee80211_mgd_teardown(struct ieee80211_sub_if_data *sdata); +void ieee80211_mgd_stop(struct ieee80211_sub_if_data *sdata); /* IBSS code */ void ieee80211_ibss_notify_scan_completed(struct ieee80211_local *local); diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 401c01f0731e..c20051b7ffcd 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -486,6 +486,8 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, /* free all potentially still buffered bcast frames */ local->total_ps_buffered -= skb_queue_len(&sdata->u.ap.ps_bc_buf); skb_queue_purge(&sdata->u.ap.ps_bc_buf); + } else if (sdata->vif.type == NL80211_IFTYPE_STATION) { + ieee80211_mgd_stop(sdata); } if (going_down) @@ -644,8 +646,6 @@ static void ieee80211_teardown_sdata(struct net_device *dev) if (ieee80211_vif_is_mesh(&sdata->vif)) mesh_rmc_free(sdata); - else if (sdata->vif.type == NL80211_IFTYPE_STATION) - ieee80211_mgd_teardown(sdata); flushed = sta_info_flush(local, sdata); WARN_ON(flushed); diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index f76da5b3f5c5..20c680bfc3ae 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -3497,7 +3497,7 @@ int ieee80211_mgd_disassoc(struct ieee80211_sub_if_data *sdata, return 0; } -void ieee80211_mgd_teardown(struct ieee80211_sub_if_data *sdata) +void ieee80211_mgd_stop(struct ieee80211_sub_if_data *sdata) { struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; From a2cd62ec9a3a2805014bdc14e0644b5faa352d3c Mon Sep 17 00:00:00 2001 From: Omar Ramirez Luna Date: Fri, 20 Apr 2012 20:22:41 -0500 Subject: [PATCH 153/365] staging: tidspbridge: remove usage of OMAP2_L4_IO_ADDRESS MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Instead now use ioremap. This is needed for 3.4 since this change emerged in mainline during one of the previous rc cycles. These solves the following compilation breaks: drivers/staging/tidspbridge/core/tiomap3430.c: In function ‘bridge_brd_start’: drivers/staging/tidspbridge/core/tiomap3430.c:425:4: error: implicit declaration of function ‘OMAP2_L4_IO_ADDRESS’ drivers/staging/tidspbridge/core/wdt.c: In function ‘dsp_wdt_init’: drivers/staging/tidspbridge/core/wdt.c:56:2: error: implicit declaration of function ‘OMAP2_L4_IO_ADDRESS’ For control registers a new function needs to be defined so we can get rid of a layer violation, but that approach must be queued for the next merge window. As seen in: http://www.arm.linux.org.uk/developer/build/ platform: omap4430-sdp build: uImage config: randconfig version: 3.4.0-rc3 start time: Apr 20 2012 01:07 Reported-by: Tony Lindgren Signed-off-by: Omar Ramirez Luna Signed-off-by: Greg Kroah-Hartman --- drivers/staging/tidspbridge/core/tiomap3430.c | 20 +++++++++++-------- drivers/staging/tidspbridge/core/wdt.c | 8 +++++++- 2 files changed, 19 insertions(+), 9 deletions(-) diff --git a/drivers/staging/tidspbridge/core/tiomap3430.c b/drivers/staging/tidspbridge/core/tiomap3430.c index 7862513cc295..9cf29fcea11e 100644 --- a/drivers/staging/tidspbridge/core/tiomap3430.c +++ b/drivers/staging/tidspbridge/core/tiomap3430.c @@ -79,10 +79,6 @@ #define OMAP343X_CONTROL_IVA2_BOOTADDR (OMAP2_CONTROL_GENERAL + 0x0190) #define OMAP343X_CONTROL_IVA2_BOOTMOD (OMAP2_CONTROL_GENERAL + 0x0194) -#define OMAP343X_CTRL_REGADDR(reg) \ - OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg)) - - /* Forward Declarations: */ static int bridge_brd_monitor(struct bridge_dev_context *dev_ctxt); static int bridge_brd_read(struct bridge_dev_context *dev_ctxt, @@ -418,19 +414,27 @@ static int bridge_brd_start(struct bridge_dev_context *dev_ctxt, /* Assert RST1 i.e only the RST only for DSP megacell */ if (!status) { + /* + * XXX: ioremapping MUST be removed once ctrl + * function is made available. + */ + void __iomem *ctrl = ioremap(OMAP343X_CTRL_BASE, SZ_4K); + if (!ctrl) + return -ENOMEM; + (*pdata->dsp_prm_rmw_bits)(OMAP3430_RST1_IVA2_MASK, OMAP3430_RST1_IVA2_MASK, OMAP3430_IVA2_MOD, OMAP2_RM_RSTCTRL); /* Mask address with 1K for compatibility */ __raw_writel(dsp_addr & OMAP3_IVA2_BOOTADDR_MASK, - OMAP343X_CTRL_REGADDR( - OMAP343X_CONTROL_IVA2_BOOTADDR)); + ctrl + OMAP343X_CONTROL_IVA2_BOOTADDR); /* * Set bootmode to self loop if dsp_debug flag is true */ __raw_writel((dsp_debug) ? OMAP3_IVA2_BOOTMOD_IDLE : 0, - OMAP343X_CTRL_REGADDR( - OMAP343X_CONTROL_IVA2_BOOTMOD)); + ctrl + OMAP343X_CONTROL_IVA2_BOOTMOD); + + iounmap(ctrl); } } if (!status) { diff --git a/drivers/staging/tidspbridge/core/wdt.c b/drivers/staging/tidspbridge/core/wdt.c index 70055c8111ed..870f934f4f3b 100644 --- a/drivers/staging/tidspbridge/core/wdt.c +++ b/drivers/staging/tidspbridge/core/wdt.c @@ -53,7 +53,10 @@ int dsp_wdt_init(void) int ret = 0; dsp_wdt.sm_wdt = NULL; - dsp_wdt.reg_base = OMAP2_L4_IO_ADDRESS(OMAP34XX_WDT3_BASE); + dsp_wdt.reg_base = ioremap(OMAP34XX_WDT3_BASE, SZ_4K); + if (!dsp_wdt.reg_base) + return -ENOMEM; + tasklet_init(&dsp_wdt.wdt3_tasklet, dsp_wdt_dpc, 0); dsp_wdt.fclk = clk_get(NULL, "wdt3_fck"); @@ -99,6 +102,9 @@ void dsp_wdt_exit(void) dsp_wdt.fclk = NULL; dsp_wdt.iclk = NULL; dsp_wdt.sm_wdt = NULL; + + if (dsp_wdt.reg_base) + iounmap(dsp_wdt.reg_base); dsp_wdt.reg_base = NULL; } From 349ae79c0a3db1632ac4db955c53db05fc017bde Mon Sep 17 00:00:00 2001 From: Seth Jennings Date: Mon, 23 Apr 2012 20:33:50 -0500 Subject: [PATCH 154/365] staging: zcache: fix Kconfig crypto dependency ZCACHE is a boolean in the Kconfig. When selected, it should require that CRYPTO be builtin (=y). Currently, ZCACHE=y and CRYPTO=m is a valid configuration when it should not be. This patch changes the zcache Kconfig to enforce this dependency. Signed-off-by: Seth Jennings Acked-by: Konrad Rzeszutek Wilk Signed-off-by: Greg Kroah-Hartman --- drivers/staging/zcache/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/zcache/Kconfig b/drivers/staging/zcache/Kconfig index 3ed2c8f656a5..7048e01f0817 100644 --- a/drivers/staging/zcache/Kconfig +++ b/drivers/staging/zcache/Kconfig @@ -2,7 +2,7 @@ config ZCACHE bool "Dynamic compression of swap pages and clean pagecache pages" # X86 dependency is because zsmalloc uses non-portable pte/tlb # functions - depends on (CLEANCACHE || FRONTSWAP) && CRYPTO && X86 + depends on (CLEANCACHE || FRONTSWAP) && CRYPTO=y && X86 select ZSMALLOC select CRYPTO_LZO default n From dc890df0a77cafe5f4a3d81c0dade637c27f1934 Mon Sep 17 00:00:00 2001 From: Imre Kaloz Date: Thu, 19 Apr 2012 12:27:27 +0200 Subject: [PATCH 155/365] staging: octeon-ethernet: fix build errors by including interrupt.h This patch fixes the following build failures: drivers/staging/octeon/ethernet.c: In function 'cvm_oct_cleanup_module': drivers/staging/octeon/ethernet.c:799:2: error: implicit declaration of function 'free_irq' drivers/staging/octeon/ethernet-rx.c: In function 'cvm_oct_no_more_work': drivers/staging/octeon/ethernet-rx.c:119:3: error: implicit declaration of function 'enable_irq' drivers/staging/octeon/ethernet-rx.c: In function 'cvm_oct_do_interrupt': drivers/staging/octeon/ethernet-rx.c:136:2: error: implicit declaration of function 'disable_irq_nosync' drivers/staging/octeon/ethernet-rx.c: In function 'cvm_oct_rx_initialize': drivers/staging/octeon/ethernet-rx.c:532:2: error: implicit declaration of function 'request_irq' drivers/staging/octeon/ethernet-tx.c: In function 'cvm_oct_tx_initialize': drivers/staging/octeon/ethernet-tx.c:712:2: error: implicit declaration of function 'request_irq' drivers/staging/octeon/ethernet-tx.c: In function 'cvm_oct_tx_shutdown': drivers/staging/octeon/ethernet-tx.c:723:2: error: implicit declaration of function 'free_irq' Signed-off-by: Imre Kaloz Acked-by: David Daney Signed-off-by: Greg Kroah-Hartman --- drivers/staging/octeon/ethernet-rx.c | 1 + drivers/staging/octeon/ethernet-tx.c | 1 + drivers/staging/octeon/ethernet.c | 1 + 3 files changed, 3 insertions(+) diff --git a/drivers/staging/octeon/ethernet-rx.c b/drivers/staging/octeon/ethernet-rx.c index 400df8cbee53..d91751f9ffe8 100644 --- a/drivers/staging/octeon/ethernet-rx.c +++ b/drivers/staging/octeon/ethernet-rx.c @@ -36,6 +36,7 @@ #include #include #include +#include #include #ifdef CONFIG_XFRM #include diff --git a/drivers/staging/octeon/ethernet-tx.c b/drivers/staging/octeon/ethernet-tx.c index 56d74dc2fbd5..91a97b3e45c6 100644 --- a/drivers/staging/octeon/ethernet-tx.c +++ b/drivers/staging/octeon/ethernet-tx.c @@ -32,6 +32,7 @@ #include #include #include +#include #include #ifdef CONFIG_XFRM #include diff --git a/drivers/staging/octeon/ethernet.c b/drivers/staging/octeon/ethernet.c index 9112cd882154..60cba8194de3 100644 --- a/drivers/staging/octeon/ethernet.c +++ b/drivers/staging/octeon/ethernet.c @@ -31,6 +31,7 @@ #include #include #include +#include #include From 18ea1fcd7ef19e496c523d814d52261cc4777f51 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Sat, 21 Apr 2012 06:57:29 -0700 Subject: [PATCH 156/365] ARM: mini2440_defconfig: Fix build error This is needed to fix mini2440_defconfig after the platform files have been moved around. arm-none-linux-gnueabi-ld: no machine record defined arm-none-linux-gnueabi-ld: no machine record defined arm-none-linux-gnueabi-ld: no machine record defined make: *** [.tmp_vmlinux1] Error 1 Signed-off-by: Arnd Bergmann Signed-off-by: Kukjin Kim --- arch/arm/configs/mini2440_defconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/configs/mini2440_defconfig b/arch/arm/configs/mini2440_defconfig index 42da9183acc8..082175c54e7c 100644 --- a/arch/arm/configs/mini2440_defconfig +++ b/arch/arm/configs/mini2440_defconfig @@ -14,6 +14,8 @@ CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set CONFIG_BLK_DEV_INTEGRITY=y CONFIG_ARCH_S3C24XX=y +# CONFIG_CPU_S3C2410 is not set +CONFIG_CPU_S3C2440=y CONFIG_S3C_ADC=y CONFIG_S3C24XX_PWM=y CONFIG_MACH_MINI2440=y From 7518dde92c27f845a685cdc559c83c666cc01840 Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Sat, 21 Apr 2012 07:55:33 -0700 Subject: [PATCH 157/365] ARM: S3C24XX: Fix build warning for S3C2410_PM warning: (CPU_S3C2440 && CPU_S3C2442) selects S3C2410_PM which has unmet direct dependencies (ARCH_S3C24XX && CPU_S3C2410) warning: (CPU_S3C2440 && CPU_S3C2442) selects S3C2410_PM which has unmet direct dependencies (ARCH_S3C24XX && CPU_S3C2410) Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c24xx/Kconfig | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig index 0f3a327ebcaa..b34287ab5afd 100644 --- a/arch/arm/mach-s3c24xx/Kconfig +++ b/arch/arm/mach-s3c24xx/Kconfig @@ -111,10 +111,6 @@ config S3C24XX_SETUP_TS help Compile in platform device definition for Samsung TouchScreen. -# cpu-specific sections - -if CPU_S3C2410 - config S3C2410_DMA bool depends on S3C24XX_DMA && (CPU_S3C2410 || CPU_S3C2442) @@ -127,6 +123,10 @@ config S3C2410_PM help Power Management code common to S3C2410 and better +# cpu-specific sections + +if CPU_S3C2410 + config S3C24XX_SIMTEC_NOR bool help From ffabec4ef7ad6ca9365d39f643b8a24c0fce04e7 Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Sat, 21 Apr 2012 08:31:38 -0700 Subject: [PATCH 158/365] ARM: EXYNOS: Fix resource on dev-dwmci.c Should be EXYNOS4_IRQ_DWMCI instead of IRQ_DWMCI, and use DEFINE_RES_{MEM,IRQ}. Reported-by: Jaehoon Chung Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/dev-dwmci.c | 13 +++---------- 1 file changed, 3 insertions(+), 10 deletions(-) diff --git a/arch/arm/mach-exynos/dev-dwmci.c b/arch/arm/mach-exynos/dev-dwmci.c index b025db4bf602..79035018fb74 100644 --- a/arch/arm/mach-exynos/dev-dwmci.c +++ b/arch/arm/mach-exynos/dev-dwmci.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include @@ -33,16 +34,8 @@ static int exynos4_dwmci_init(u32 slot_id, irq_handler_t handler, void *data) } static struct resource exynos4_dwmci_resource[] = { - [0] = { - .start = EXYNOS4_PA_DWMCI, - .end = EXYNOS4_PA_DWMCI + SZ_4K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_DWMCI, - .end = IRQ_DWMCI, - .flags = IORESOURCE_IRQ, - } + [0] = DEFINE_RES_MEM(EXYNOS4_PA_DWMCI, SZ_4K), + [1] = DEFINE_RES_IRQ(EXYNOS4_IRQ_DWMCI), }; static struct dw_mci_board exynos4_dwci_pdata = { From 6fff5a11fd07d7f918ac3737da4846558518c31d Mon Sep 17 00:00:00 2001 From: Tushar Behera Date: Tue, 24 Apr 2012 13:25:01 -0700 Subject: [PATCH 159/365] ARM: EXYNOS: Fix compilation error when CONFIG_OF is not defined Fixed following compile time error. arch/arm/mach-exynos/common.c: In function 'exynos5_init_irq': arch/arm/mach-exynos/common.c:539:2: error: implicit declaration of function 'of_irq_init' arch/arm/mach-exynos/common.c:539:14: error: 'exynos4_dt_irq_match' undeclared (first use in this function) arch/arm/mach-exynos/common.c:539:14: note: each undeclared identifier is reported only once for each function it appears in Cc: Thomas Abraham Signed-off-by: Tushar Behera Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/common.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index 6c0e4f54c94d..5ccd6e80a607 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -547,7 +547,9 @@ void __init exynos5_init_irq(void) { int irq; +#ifdef CONFIG_OF of_irq_init(exynos4_dt_irq_match); +#endif for (irq = 0; irq < EXYNOS5_MAX_COMBINER_NR; irq++) { combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq), From 6f6543f53f9ce136e01d7114bf6f0818ca54fb41 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Tue, 24 Apr 2012 11:29:42 +0200 Subject: [PATCH 160/365] usb gadget: uvc: uvc_request_data::length field must be signed The field is used to pass the UVC request data length, but can also be used to signal an error when setting it to a negative value. Switch from unsigned int to __s32. Reported-by: Fernandez Gonzalo Signed-off-by: Laurent Pinchart Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/uvc.h | 2 +- drivers/usb/gadget/uvc_v4l2.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/gadget/uvc.h b/drivers/usb/gadget/uvc.h index bc78c606c12b..ca4e03a1c73a 100644 --- a/drivers/usb/gadget/uvc.h +++ b/drivers/usb/gadget/uvc.h @@ -28,7 +28,7 @@ struct uvc_request_data { - unsigned int length; + __s32 length; __u8 data[60]; }; diff --git a/drivers/usb/gadget/uvc_v4l2.c b/drivers/usb/gadget/uvc_v4l2.c index f6e083b50191..54d7ca559cb2 100644 --- a/drivers/usb/gadget/uvc_v4l2.c +++ b/drivers/usb/gadget/uvc_v4l2.c @@ -39,7 +39,7 @@ uvc_send_response(struct uvc_device *uvc, struct uvc_request_data *data) if (data->length < 0) return usb_ep_set_halt(cdev->gadget->ep0); - req->length = min(uvc->event_length, data->length); + req->length = min_t(unsigned int, uvc->event_length, data->length); req->zero = data->length < uvc->event_length; req->dma = DMA_ADDR_INVALID; From 151b61284776be2d6f02d48c23c3625678960b97 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 24 Apr 2012 14:07:22 -0400 Subject: [PATCH 161/365] USB: EHCI: fix crash during suspend on ASUS computers This patch (as1545) fixes a problem affecting several ASUS computers: The machine crashes or corrupts memory when going into suspend if the ehci-hcd driver is bound to any controllers. Users have been forced to unbind or unload ehci-hcd before putting their systems to sleep. After extensive testing, it was determined that the machines don't like going into suspend when any EHCI controllers are in the PCI D3 power state. Presumably this is a firmware bug, but there's nothing we can do about it except to avoid putting the controllers in D3 during system sleep. The patch adds a new flag to indicate whether the problem is present, and avoids changing the controller's power state if the flag is set. Runtime suspend is unaffected; this matters only for system suspend. However as a side effect, the controller will not respond to remote wakeup requests while the system is asleep. Hence USB wakeup is not functional -- but of course, this is already true in the current state of affairs. This fixes Bugzilla #42728. Signed-off-by: Alan Stern Tested-by: Steven Rostedt Tested-by: Andrey Rahmatullin Tested-by: Oleksij Rempel (fishor) Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hcd-pci.c | 9 +++++++++ drivers/usb/host/ehci-pci.c | 8 ++++++++ include/linux/usb/hcd.h | 2 ++ 3 files changed, 19 insertions(+) diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c index 622b4a48e732..57ed9e400c06 100644 --- a/drivers/usb/core/hcd-pci.c +++ b/drivers/usb/core/hcd-pci.c @@ -493,6 +493,15 @@ static int hcd_pci_suspend_noirq(struct device *dev) pci_save_state(pci_dev); + /* + * Some systems crash if an EHCI controller is in D3 during + * a sleep transition. We have to leave such controllers in D0. + */ + if (hcd->broken_pci_sleep) { + dev_dbg(dev, "Staying in PCI D0\n"); + return retval; + } + /* If the root hub is dead rather than suspended, disallow remote * wakeup. usb_hc_died() should ensure that both hosts are marked as * dying, so we only need to check the primary roothub. diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index 01bb7241d6ef..fe8dc069164e 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -144,6 +144,14 @@ static int ehci_pci_setup(struct usb_hcd *hcd) hcd->has_tt = 1; tdi_reset(ehci); } + if (pdev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK) { + /* EHCI #1 or #2 on 6 Series/C200 Series chipset */ + if (pdev->device == 0x1c26 || pdev->device == 0x1c2d) { + ehci_info(ehci, "broken D3 during system sleep on ASUS\n"); + hcd->broken_pci_sleep = 1; + device_set_wakeup_capable(&pdev->dev, false); + } + } break; case PCI_VENDOR_ID_TDI: if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) { diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h index 5de415707c23..d28cc78a38e4 100644 --- a/include/linux/usb/hcd.h +++ b/include/linux/usb/hcd.h @@ -126,6 +126,8 @@ struct usb_hcd { unsigned wireless:1; /* Wireless USB HCD */ unsigned authorized_default:1; unsigned has_tt:1; /* Integrated TT in root hub */ + unsigned broken_pci_sleep:1; /* Don't put the + controller in PCI-D3 for system sleep */ unsigned int irq; /* irq allocated */ void __iomem *regs; /* device memory/io */ From f8262d476823a7ea1eb497ff9676d1eab2393c75 Mon Sep 17 00:00:00 2001 From: Bojan Smojver Date: Tue, 24 Apr 2012 23:53:28 +0200 Subject: [PATCH 162/365] PM / Hibernate: fix the number of pages used for hibernate/thaw buffering Hibernation regression fix, since 3.2. Calculate the number of required free pages based on non-high memory pages only, because that is where the buffers will come from. Commit 081a9d043c983f161b78fdc4671324d1342b86bc introduced a new buffer page allocation logic during hibernation, in order to improve the performance. The amount of pages allocated was calculated based on total amount of pages available, although only non-high memory pages are usable for this purpose. This caused hibernation code to attempt to over allocate pages on platforms that have high memory, which led to hangs. Signed-off-by: Bojan Smojver Signed-off-by: Rafael J. Wysocki --- kernel/power/swap.c | 28 ++++++++++++++++++++++------ 1 file changed, 22 insertions(+), 6 deletions(-) diff --git a/kernel/power/swap.c b/kernel/power/swap.c index 8742fd013a94..eef311a58a64 100644 --- a/kernel/power/swap.c +++ b/kernel/power/swap.c @@ -51,6 +51,23 @@ #define MAP_PAGE_ENTRIES (PAGE_SIZE / sizeof(sector_t) - 1) +/* + * Number of free pages that are not high. + */ +static inline unsigned long low_free_pages(void) +{ + return nr_free_pages() - nr_free_highpages(); +} + +/* + * Number of pages required to be kept free while writing the image. Always + * half of all available low pages before the writing starts. + */ +static inline unsigned long reqd_free_pages(void) +{ + return low_free_pages() / 2; +} + struct swap_map_page { sector_t entries[MAP_PAGE_ENTRIES]; sector_t next_swap; @@ -72,7 +89,7 @@ struct swap_map_handle { sector_t cur_swap; sector_t first_sector; unsigned int k; - unsigned long nr_free_pages, written; + unsigned long reqd_free_pages; u32 crc32; }; @@ -316,8 +333,7 @@ static int get_swap_writer(struct swap_map_handle *handle) goto err_rel; } handle->k = 0; - handle->nr_free_pages = nr_free_pages() >> 1; - handle->written = 0; + handle->reqd_free_pages = reqd_free_pages(); handle->first_sector = handle->cur_swap; return 0; err_rel: @@ -352,11 +368,11 @@ static int swap_write_page(struct swap_map_handle *handle, void *buf, handle->cur_swap = offset; handle->k = 0; } - if (bio_chain && ++handle->written > handle->nr_free_pages) { + if (bio_chain && low_free_pages() <= handle->reqd_free_pages) { error = hib_wait_on_bio_chain(bio_chain); if (error) goto out; - handle->written = 0; + handle->reqd_free_pages = reqd_free_pages(); } out: return error; @@ -618,7 +634,7 @@ static int save_image_lzo(struct swap_map_handle *handle, * Adjust number of free pages after all allocations have been done. * We don't want to run out of pages when writing. */ - handle->nr_free_pages = nr_free_pages() >> 1; + handle->reqd_free_pages = reqd_free_pages(); /* * Start the CRC32 thread. From 840777de530ae96ee9a3022f7ec1d6c65abb26ac Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Tue, 24 Apr 2012 16:06:50 -0700 Subject: [PATCH 163/365] IB/mad: Set 'D' bit in response for unhandled MADs Commit 0b307043049f ("IB/mad: Return error response for unsupported MADs") does not handle directed-route MADs properly -- it fails to set the 'D' bit in the response MAD status field. This is a problem for SmInfo MADs when the receiver does not have an SM running. Reviewed-by: Hal Rosenstock Signed-off-by: Jack Morgenstein Signed-off-by: Roland Dreier --- drivers/infiniband/core/mad.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/infiniband/core/mad.c b/drivers/infiniband/core/mad.c index 426bb7617ec6..1c73d8aa4b97 100644 --- a/drivers/infiniband/core/mad.c +++ b/drivers/infiniband/core/mad.c @@ -1854,6 +1854,8 @@ static bool generate_unmatched_resp(struct ib_mad_private *recv, response->mad.mad.mad_hdr.method = IB_MGMT_METHOD_GET_RESP; response->mad.mad.mad_hdr.status = cpu_to_be16(IB_MGMT_MAD_STATUS_UNSUPPORTED_METHOD_ATTRIB); + if (recv->mad.mad.mad_hdr.mgmt_class == IB_MGMT_CLASS_SUBN_DIRECTED_ROUTE) + response->mad.mad.mad_hdr.status |= IB_SMP_DIRECTION; return true; } else { From a9e7432319eb26ad90f18a7d215e50341d28ecb2 Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Tue, 24 Apr 2012 16:08:57 -0700 Subject: [PATCH 164/365] IB/mad: Don't send response for failed MADs Commit 0b307043049f ("IB/mad: Return error response for unsupported MADs") does not failed MADs (eg those that return IB_MAD_RESULT_FAILURE) properly -- these MADs should be silently discarded. (We should not force the lower-layer drivers to return SUCCESS | CONSUMED in this case, since the MAD is NOT successful). Unsupported MADs are not failures -- they return SUCCESS, but with an "unsupported error" status value inside the response MAD. Reviewed-by: Hal Rosenstock Signed-off-by: Jack Morgenstein Signed-off-by: Roland Dreier --- drivers/infiniband/core/mad.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/infiniband/core/mad.c b/drivers/infiniband/core/mad.c index 1c73d8aa4b97..b0d0bc8a6fb6 100644 --- a/drivers/infiniband/core/mad.c +++ b/drivers/infiniband/core/mad.c @@ -1871,6 +1871,7 @@ static void ib_mad_recv_done_handler(struct ib_mad_port_private *port_priv, struct ib_mad_list_head *mad_list; struct ib_mad_agent_private *mad_agent; int port_num; + int ret = IB_MAD_RESULT_SUCCESS; mad_list = (struct ib_mad_list_head *)(unsigned long)wc->wr_id; qp_info = mad_list->mad_queue->qp_info; @@ -1954,8 +1955,6 @@ static void ib_mad_recv_done_handler(struct ib_mad_port_private *port_priv, local: /* Give driver "right of first refusal" on incoming MAD */ if (port_priv->device->process_mad) { - int ret; - ret = port_priv->device->process_mad(port_priv->device, 0, port_priv->port_num, wc, &recv->grh, @@ -1983,7 +1982,8 @@ local: * or via recv_handler in ib_mad_complete_recv() */ recv = NULL; - } else if (generate_unmatched_resp(recv, response)) { + } else if ((ret & IB_MAD_RESULT_SUCCESS) && + generate_unmatched_resp(recv, response)) { agent_send_response(&response->mad.mad, &recv->grh, wc, port_priv->device, port_num, qp_info->qp->qp_num); } From bf6b47deb40f9fc8ddb4573373dc9614aab59d35 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Wed, 11 Apr 2012 23:43:29 +0200 Subject: [PATCH 165/365] IB/mlx4: Fix memory leaks in ib_link_query_port() If the call to mlx4_MAD_IFC() fails in ib_link_query_port() we will currently do 'return err;' which will leak 'in_mad' and 'out_mad'. We should instead do 'goto out;' where we'll properly free the memory we previously allocated. Signed-off-by: Jesper Juhl Acked-by: Or Gerlitz Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mlx4/main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/mlx4/main.c b/drivers/infiniband/hw/mlx4/main.c index 75d305629300..cc88c9c955c9 100644 --- a/drivers/infiniband/hw/mlx4/main.c +++ b/drivers/infiniband/hw/mlx4/main.c @@ -247,7 +247,7 @@ static int ib_link_query_port(struct ib_device *ibdev, u8 port, err = mlx4_MAD_IFC(to_mdev(ibdev), 1, 1, port, NULL, NULL, in_mad, out_mad); if (err) - return err; + goto out; /* Checking LinkSpeedActive for FDR-10 */ if (out_mad->data[15] & 0x1) From 9b4d1cbb1391ae603c20cbf8c0beb66e38397196 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Tue, 24 Apr 2012 17:28:12 -0700 Subject: [PATCH 166/365] ARM: SAMSUNG: add missing MMC_CAP2_BROKEN_VOLTAGE capability Commit 6e8201f57c935 "mmc: core: add the capability for broken voltage" introduced a new quirk to indicate that MMC core should ignore voltage change errors reported by the regulators core. This is required to get SDHCI working on UniversalC210, NURI and GONI boards again after commit ceb6143b2df81c ("mmc: sdhci: fix vmmc handling"). Signed-off-by: Marek Szyprowski Signed-off-by: Kyungmin Park Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/mach-nuri.c | 1 + arch/arm/mach-exynos/mach-universal_c210.c | 1 + arch/arm/mach-s5pv210/mach-goni.c | 2 ++ 3 files changed, 4 insertions(+) diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c index b4f1f902ce6d..ed90aef404c3 100644 --- a/arch/arm/mach-exynos/mach-nuri.c +++ b/arch/arm/mach-exynos/mach-nuri.c @@ -112,6 +112,7 @@ static struct s3c_sdhci_platdata nuri_hsmmc0_data __initdata = { .host_caps = (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED | MMC_CAP_ERASE), + .host_caps2 = MMC_CAP2_BROKEN_VOLTAGE, .cd_type = S3C_SDHCI_CD_PERMANENT, .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, }; diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c index 7ebf79c2ab34..cb2b027f09a6 100644 --- a/arch/arm/mach-exynos/mach-universal_c210.c +++ b/arch/arm/mach-exynos/mach-universal_c210.c @@ -747,6 +747,7 @@ static struct s3c_sdhci_platdata universal_hsmmc0_data __initdata = { .max_width = 8, .host_caps = (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED), + .host_caps2 = MMC_CAP2_BROKEN_VOLTAGE, .cd_type = S3C_SDHCI_CD_PERMANENT, .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, }; diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index a8933de3d627..32395664e879 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include @@ -765,6 +766,7 @@ static void __init goni_pmic_init(void) /* MoviNAND */ static struct s3c_sdhci_platdata goni_hsmmc0_data __initdata = { .max_width = 4, + .host_caps2 = MMC_CAP2_BROKEN_VOLTAGE, .cd_type = S3C_SDHCI_CD_PERMANENT, }; From 569a3aff70e880588fe4b3f1622ac60abbeb4a28 Mon Sep 17 00:00:00 2001 From: Prasanna S Panchamukhi Date: Thu, 19 Apr 2012 17:01:00 +0000 Subject: [PATCH 167/365] e1000e: MSI interrupt test failed, using legacy interrupt Following logs where seen on Systems with multiple NICs, while using MSI interrupts as shown below: Feb 16 15:09:32 (none) user.notice kernel: 0000:00:0d.0: lan0_0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX Feb 16 15:09:32 (none) user.notice kernel: 0000:40:0d.0: wan0_1: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX Feb 16 15:09:32 (none) user.notice kernel: 0000:40:0d.0: lan0_1: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX Feb 16 15:09:32 (none) user.warn kernel: 0000:40:0e.0: wan4_0: MSI interrupt test failed, using legacy interrupt. Feb 16 15:09:32 (none) user.notice kernel: 0000:00:0e.0: wan1_0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX Feb 16 15:09:33 (none) user.notice kernel: 0000:00:0e.0: lan1_0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX Feb 16 15:09:33 (none) user.notice kernel: 0000:00:0f.0: wan2_0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX Feb 16 15:09:33 (none) user.notice kernel: 0000:00:0f.0: lan2_0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX Feb 16 15:09:33 (none) user.notice kernel: 0000:40:0a.0: wan3_0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX Feb 16 15:09:33 (none) user.notice kernel: 0000:40:0a.0: lan3_0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX Feb 16 15:09:34 (none) user.notice kernel: 0000:40:0e.0: lan4_0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX Feb 16 15:09:34 (none) user.notice kernel: 0000:40:0f.0: wan5_0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX Feb 16 15:09:34 (none) user.notice kernel: 0000:40:0f.0: lan5_0: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX This patch fixes this problem by increasing the msleep from 50 to 100. Signed-off-by: Prasanna S Panchamukhi Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000e/netdev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 19ab2154802c..9520a6ac1f30 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -3799,7 +3799,7 @@ static int e1000_test_msi_interrupt(struct e1000_adapter *adapter) /* fire an unusual interrupt on the test handler */ ew32(ICS, E1000_ICS_RXSEQ); e1e_flush(); - msleep(50); + msleep(100); e1000_irq_disable(adapter); From 727c356f4d799b53f94cf8fe43e19d64482348c7 Mon Sep 17 00:00:00 2001 From: Jeff Kirsher Date: Fri, 20 Apr 2012 08:51:45 +0000 Subject: [PATCH 168/365] e1000e: Fix default interrupt throttle rate not set in NIC HW Based on the original patch from Ying Cai This change ensures that the itr/itr_setting adjustment logic is used, even for the default/compiled-in value. Context: When we changed the default InterruptThrottleRate value from default (3 = dynamic mode) to 8000 for example, only adapter->itr_setting (which controls interrupt coalescing mode) was set to 8000, but adapter->itr (which controls the value set in NIC register) was not updated accordingly. So from ethtool, it seemed the interrupt throttling is enabled at 8000 intr/s, but the NIC actually was running in dynamic mode which has lower CPU efficiency especially when throughput is not high. CC: Ying Cai CC: David Decotigny Signed-off-by: Jeff Kirsher Tested-by: Aaron Brown --- drivers/net/ethernet/intel/e1000e/param.c | 99 ++++++++++++----------- 1 file changed, 53 insertions(+), 46 deletions(-) diff --git a/drivers/net/ethernet/intel/e1000e/param.c b/drivers/net/ethernet/intel/e1000e/param.c index ff796e42c3eb..16adeb9418a8 100644 --- a/drivers/net/ethernet/intel/e1000e/param.c +++ b/drivers/net/ethernet/intel/e1000e/param.c @@ -106,7 +106,7 @@ E1000_PARAM(RxAbsIntDelay, "Receive Absolute Interrupt Delay"); /* * Interrupt Throttle Rate (interrupts/sec) * - * Valid Range: 100-100000 (0=off, 1=dynamic, 3=dynamic conservative) + * Valid Range: 100-100000 or one of: 0=off, 1=dynamic, 3=dynamic conservative */ E1000_PARAM(InterruptThrottleRate, "Interrupt Throttling Rate"); #define DEFAULT_ITR 3 @@ -344,53 +344,60 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter) if (num_InterruptThrottleRate > bd) { adapter->itr = InterruptThrottleRate[bd]; - switch (adapter->itr) { - case 0: - e_info("%s turned off\n", opt.name); - break; - case 1: - e_info("%s set to dynamic mode\n", opt.name); - adapter->itr_setting = adapter->itr; - adapter->itr = 20000; - break; - case 3: - e_info("%s set to dynamic conservative mode\n", - opt.name); - adapter->itr_setting = adapter->itr; - adapter->itr = 20000; - break; - case 4: - e_info("%s set to simplified (2000-8000 ints) " - "mode\n", opt.name); - adapter->itr_setting = 4; - break; - default: - /* - * Save the setting, because the dynamic bits - * change itr. - */ - if (e1000_validate_option(&adapter->itr, &opt, - adapter) && - (adapter->itr == 3)) { - /* - * In case of invalid user value, - * default to conservative mode. - */ - adapter->itr_setting = adapter->itr; - adapter->itr = 20000; - } else { - /* - * Clear the lower two bits because - * they are used as control. - */ - adapter->itr_setting = - adapter->itr & ~3; - } - break; - } + + /* + * Make sure a message is printed for non-special + * values. And in case of an invalid option, display + * warning, use default and got through itr/itr_setting + * adjustment logic below + */ + if ((adapter->itr > 4) && + e1000_validate_option(&adapter->itr, &opt, adapter)) + adapter->itr = opt.def; } else { - adapter->itr_setting = opt.def; + /* + * If no option specified, use default value and go + * through the logic below to adjust itr/itr_setting + */ + adapter->itr = opt.def; + + /* + * Make sure a message is printed for non-special + * default values + */ + if (adapter->itr > 40) + e_info("%s set to default %d\n", opt.name, + adapter->itr); + } + + adapter->itr_setting = adapter->itr; + switch (adapter->itr) { + case 0: + e_info("%s turned off\n", opt.name); + break; + case 1: + e_info("%s set to dynamic mode\n", opt.name); adapter->itr = 20000; + break; + case 3: + e_info("%s set to dynamic conservative mode\n", + opt.name); + adapter->itr = 20000; + break; + case 4: + e_info("%s set to simplified (2000-8000 ints) mode\n", + opt.name); + break; + default: + /* + * Save the setting, because the dynamic bits + * change itr. + * + * Clear the lower two bits because + * they are used as control. + */ + adapter->itr_setting &= ~3; + break; } } { /* Interrupt Mode */ From 93f90e5186053611fe93d889e99ee2852f4da250 Mon Sep 17 00:00:00 2001 From: Vasu Dev Date: Fri, 6 Apr 2012 15:52:51 -0700 Subject: [PATCH 169/365] [SCSI] libfc: update mfs boundry checking A previous commit changed the mfs checking to ensure the new mfs is less or equal to the mfs supported by the FCF. This doesn't work for BRDCM cards as they set an mfs of 2048 regardless of whether the switch returns a larger mfs. This patch validates the new mfs against the upper and lower spec defined boundries for a FCoE mfs. Signed-off-by: Vasu Dev Signed-off-by: Bhanu Prakash Gollapudi Signed-off-by: Robert Love Signed-off-by: James Bottomley --- drivers/scsi/libfc/fc_lport.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c index ef9560dff295..cc83b66d45b7 100644 --- a/drivers/scsi/libfc/fc_lport.c +++ b/drivers/scsi/libfc/fc_lport.c @@ -1742,17 +1742,19 @@ void fc_lport_flogi_resp(struct fc_seq *sp, struct fc_frame *fp, mfs = ntohs(flp->fl_csp.sp_bb_data) & FC_SP_BB_DATA_MASK; - if (mfs >= FC_SP_MIN_MAX_PAYLOAD && - mfs <= lport->mfs) { - lport->mfs = mfs; - fc_host_maxframe_size(lport->host) = mfs; - } else { + + if (mfs < FC_SP_MIN_MAX_PAYLOAD || mfs > FC_SP_MAX_MAX_PAYLOAD) { FC_LPORT_DBG(lport, "FLOGI bad mfs:%hu response, " "lport->mfs:%hu\n", mfs, lport->mfs); fc_lport_error(lport, fp); goto err; } + if (mfs <= lport->mfs) { + lport->mfs = mfs; + fc_host_maxframe_size(lport->host) = mfs; + } + csp_flags = ntohs(flp->fl_csp.sp_features); r_a_tov = ntohl(flp->fl_csp.sp_r_a_tov); e_d_tov = ntohl(flp->fl_csp.sp_e_d_tov); From 7118c07a844d367560ee91adb2071bde2fabcdbf Mon Sep 17 00:00:00 2001 From: Sasha Levin Date: Sat, 14 Apr 2012 12:37:46 -0400 Subject: [PATCH 170/365] ipvs: Verify that IP_VS protocol has been registered The registration of a protocol might fail, there were no checks and all registrations were assumed to be correct. This lead to NULL ptr dereferences when apps tried registering. For example: [ 1293.226051] BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 [ 1293.227038] IP: [] tcp_register_app+0x60/0xb0 [ 1293.227038] PGD 391de067 PUD 6c20b067 PMD 0 [ 1293.227038] Oops: 0000 [#1] PREEMPT SMP [ 1293.227038] CPU 1 [ 1293.227038] Pid: 19609, comm: trinity Tainted: G W 3.4.0-rc1-next-20120405-sasha-dirty #57 [ 1293.227038] RIP: 0010:[] [] tcp_register_app+0x60/0xb0 [ 1293.227038] RSP: 0018:ffff880038c1dd18 EFLAGS: 00010286 [ 1293.227038] RAX: ffffffffffffffc0 RBX: 0000000000001500 RCX: 0000000000010000 [ 1293.227038] RDX: 0000000000000000 RSI: ffff88003a2d5888 RDI: 0000000000000282 [ 1293.227038] RBP: ffff880038c1dd48 R08: 0000000000000000 R09: 0000000000000000 [ 1293.227038] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88003a2d5668 [ 1293.227038] R13: ffff88003a2d5988 R14: ffff8800696a8ff8 R15: 0000000000000000 [ 1293.227038] FS: 00007f01930d9700(0000) GS:ffff88007ce00000(0000) knlGS:0000000000000000 [ 1293.227038] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 1293.227038] CR2: 0000000000000018 CR3: 0000000065dfc000 CR4: 00000000000406e0 [ 1293.227038] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1293.227038] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 1293.227038] Process trinity (pid: 19609, threadinfo ffff880038c1c000, task ffff88002dc73000) [ 1293.227038] Stack: [ 1293.227038] ffff880038c1dd48 00000000fffffff4 ffff8800696aada0 ffff8800694f5580 [ 1293.227038] ffffffff8369f1e0 0000000000001500 ffff880038c1dd98 ffffffff822a716b [ 1293.227038] 0000000000000000 ffff8800696a8ff8 0000000000000015 ffff8800694f5580 [ 1293.227038] Call Trace: [ 1293.227038] [] ip_vs_app_inc_new+0xdb/0x180 [ 1293.227038] [] register_ip_vs_app_inc+0x48/0x70 [ 1293.227038] [] __ip_vs_ftp_init+0xba/0x140 [ 1293.227038] [] ops_init+0x80/0x90 [ 1293.227038] [] setup_net+0x5b/0xe0 [ 1293.227038] [] copy_net_ns+0x76/0x100 [ 1293.227038] [] create_new_namespaces+0xfb/0x190 [ 1293.227038] [] unshare_nsproxy_namespaces+0x61/0x80 [ 1293.227038] [] sys_unshare+0xff/0x290 [ 1293.227038] [] ? trace_hardirqs_on_thunk+0x3a/0x3f [ 1293.227038] [] system_call_fastpath+0x16/0x1b [ 1293.227038] Code: 89 c7 e8 34 91 3b 00 89 de 66 c1 ee 04 31 de 83 e6 0f 48 83 c6 22 48 c1 e6 04 4a 8b 14 26 49 8d 34 34 48 8d 42 c0 48 39 d6 74 13 <66> 39 58 58 74 22 48 8b 48 40 48 8d 41 c0 48 39 ce 75 ed 49 8d [ 1293.227038] RIP [] tcp_register_app+0x60/0xb0 [ 1293.227038] RSP [ 1293.227038] CR2: 0000000000000018 [ 1293.379284] ---[ end trace 364ab40c7011a009 ]--- [ 1293.381182] Kernel panic - not syncing: Fatal exception in interrupt Signed-off-by: Sasha Levin Acked-by: Julian Anastasov Signed-off-by: Simon Horman Signed-off-by: Pablo Neira Ayuso --- net/netfilter/ipvs/ip_vs_proto.c | 27 ++++++++++++++++++--------- 1 file changed, 18 insertions(+), 9 deletions(-) diff --git a/net/netfilter/ipvs/ip_vs_proto.c b/net/netfilter/ipvs/ip_vs_proto.c index f843a8833250..a62360e29037 100644 --- a/net/netfilter/ipvs/ip_vs_proto.c +++ b/net/netfilter/ipvs/ip_vs_proto.c @@ -59,9 +59,6 @@ static int __used __init register_ip_vs_protocol(struct ip_vs_protocol *pp) return 0; } -#if defined(CONFIG_IP_VS_PROTO_TCP) || defined(CONFIG_IP_VS_PROTO_UDP) || \ - defined(CONFIG_IP_VS_PROTO_SCTP) || defined(CONFIG_IP_VS_PROTO_AH) || \ - defined(CONFIG_IP_VS_PROTO_ESP) /* * register an ipvs protocols netns related data */ @@ -86,7 +83,6 @@ register_ip_vs_proto_netns(struct net *net, struct ip_vs_protocol *pp) return 0; } -#endif /* * unregister an ipvs protocol @@ -316,22 +312,35 @@ ip_vs_tcpudp_debug_packet(int af, struct ip_vs_protocol *pp, */ int __net_init ip_vs_protocol_net_init(struct net *net) { + int i, ret; + static struct ip_vs_protocol *protos[] = { #ifdef CONFIG_IP_VS_PROTO_TCP - register_ip_vs_proto_netns(net, &ip_vs_protocol_tcp); + &ip_vs_protocol_tcp, #endif #ifdef CONFIG_IP_VS_PROTO_UDP - register_ip_vs_proto_netns(net, &ip_vs_protocol_udp); + &ip_vs_protocol_udp, #endif #ifdef CONFIG_IP_VS_PROTO_SCTP - register_ip_vs_proto_netns(net, &ip_vs_protocol_sctp); + &ip_vs_protocol_sctp, #endif #ifdef CONFIG_IP_VS_PROTO_AH - register_ip_vs_proto_netns(net, &ip_vs_protocol_ah); + &ip_vs_protocol_ah, #endif #ifdef CONFIG_IP_VS_PROTO_ESP - register_ip_vs_proto_netns(net, &ip_vs_protocol_esp); + &ip_vs_protocol_esp, #endif + }; + + for (i = 0; i < ARRAY_SIZE(protos); i++) { + ret = register_ip_vs_proto_netns(net, protos[i]); + if (ret < 0) + goto cleanup; + } return 0; + +cleanup: + ip_vs_protocol_net_cleanup(net); + return ret; } void __net_exit ip_vs_protocol_net_cleanup(struct net *net) From 8f9b9a2fad47af27e14b037395e03cd8278d96d7 Mon Sep 17 00:00:00 2001 From: Julian Anastasov Date: Fri, 13 Apr 2012 18:08:43 +0300 Subject: [PATCH 171/365] ipvs: fix crash in ip_vs_control_net_cleanup on unload commit 14e405461e664b777e2a5636e10b2ebf36a686ec (2.6.39) ("Add __ip_vs_control_{init,cleanup}_sysctl()") introduced regression due to wrong __net_init for __ip_vs_control_cleanup_sysctl. This leads to crash when the ip_vs module is unloaded. Fix it by changing __net_init to __net_exit for the function that is already renamed to ip_vs_control_net_cleanup_sysctl. Signed-off-by: Julian Anastasov Signed-off-by: Hans Schillstrom Signed-off-by: Simon Horman Signed-off-by: Pablo Neira Ayuso --- net/netfilter/ipvs/ip_vs_ctl.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c index b3afe189af61..376d2b12d581 100644 --- a/net/netfilter/ipvs/ip_vs_ctl.c +++ b/net/netfilter/ipvs/ip_vs_ctl.c @@ -3680,7 +3680,7 @@ int __net_init ip_vs_control_net_init_sysctl(struct net *net) return 0; } -void __net_init ip_vs_control_net_cleanup_sysctl(struct net *net) +void __net_exit ip_vs_control_net_cleanup_sysctl(struct net *net) { struct netns_ipvs *ipvs = net_ipvs(net); @@ -3692,7 +3692,7 @@ void __net_init ip_vs_control_net_cleanup_sysctl(struct net *net) #else int __net_init ip_vs_control_net_init_sysctl(struct net *net) { return 0; } -void __net_init ip_vs_control_net_cleanup_sysctl(struct net *net) { } +void __net_exit ip_vs_control_net_cleanup_sysctl(struct net *net) { } #endif From c847382838ca503b6c55fb599160146221a2c141 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Sun, 8 Apr 2012 16:26:19 -0700 Subject: [PATCH 172/365] dma: pl330: fix a couple of compilation warnings Move a couple of tests and do a minor refactor to avoid: drivers/dma/pl330.c: In function 'pl330_probe': drivers/dma/pl330.c:2929:215: warning: comparison of distinct pointer types lacks a cast [enabled by default] drivers/dma/pl330.c: In function 'pl330_tasklet': drivers/dma/pl330.c:2250:8: warning: 'pch' may be used uninitialized in this function [-Wuninitialized] drivers/dma/pl330.c:2228:25: note: 'pch' was declared here drivers/dma/pl330.c:2277:130: warning: 'pch' may be used uninitialized in this function [-Wuninitialized] drivers/dma/pl330.c:2260:25: note: 'pch' was declared here Signed-off-by: Olof Johansson Signed-off-by: Vinod Koul --- drivers/dma/pl330.c | 25 +++++++++++++++---------- 1 file changed, 15 insertions(+), 10 deletions(-) diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c index 282caf118be8..2ee6e23930ad 100644 --- a/drivers/dma/pl330.c +++ b/drivers/dma/pl330.c @@ -2225,12 +2225,9 @@ static inline void free_desc_list(struct list_head *list) { struct dma_pl330_dmac *pdmac; struct dma_pl330_desc *desc; - struct dma_pl330_chan *pch; + struct dma_pl330_chan *pch = NULL; unsigned long flags; - if (list_empty(list)) - return; - /* Finish off the work list */ list_for_each_entry(desc, list, node) { dma_async_tx_callback callback; @@ -2247,6 +2244,10 @@ static inline void free_desc_list(struct list_head *list) desc->pchan = NULL; } + /* pch will be unset if list was empty */ + if (!pch) + return; + pdmac = pch->dmac; spin_lock_irqsave(&pdmac->pool_lock, flags); @@ -2257,12 +2258,9 @@ static inline void free_desc_list(struct list_head *list) static inline void handle_cyclic_desc_list(struct list_head *list) { struct dma_pl330_desc *desc; - struct dma_pl330_chan *pch; + struct dma_pl330_chan *pch = NULL; unsigned long flags; - if (list_empty(list)) - return; - list_for_each_entry(desc, list, node) { dma_async_tx_callback callback; @@ -2274,6 +2272,10 @@ static inline void handle_cyclic_desc_list(struct list_head *list) callback(desc->txd.callback_param); } + /* pch will be unset if list was empty */ + if (!pch) + return; + spin_lock_irqsave(&pch->lock, flags); list_splice_tail_init(list, &pch->work_list); spin_unlock_irqrestore(&pch->lock, flags); @@ -2926,8 +2928,11 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id) INIT_LIST_HEAD(&pd->channels); /* Initialize channel parameters */ - num_chan = max(pdat ? pdat->nr_valid_peri : (u8)pi->pcfg.num_peri, - (u8)pi->pcfg.num_chan); + if (pdat) + num_chan = max_t(int, pdat->nr_valid_peri, pi->pcfg.num_chan); + else + num_chan = max_t(int, pi->pcfg.num_peri, pi->pcfg.num_chan); + pdmac->peripherals = kzalloc(num_chan * sizeof(*pch), GFP_KERNEL); for (i = 0; i < num_chan; i++) { From 88c08a3fba9954ce0ec3e1eab07c498a419ad7e3 Mon Sep 17 00:00:00 2001 From: Davide Ciminaghi Date: Thu, 19 Apr 2012 12:20:24 +0200 Subject: [PATCH 173/365] dmaengine/amba-pl08x : reset phychan_hold on terminate all When a client calls pl08x_control with DMA_TERMINATE_ALL, it is correct to terminate and release the phy channel currently in use (if one is in use), but the phychan_hold counter must also be reset (otherwise it could get trapped in an unbalanced state). Signed-off-by: Davide Ciminaghi Reviewed-by: Viresh Kumar Acked-by: Linus Walleij Signed-off-by: Vinod Koul --- drivers/dma/amba-pl08x.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index c301a8ec31aa..3d704abd7912 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -1429,6 +1429,7 @@ static int pl08x_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, * signal */ release_phy_channel(plchan); + plchan->phychan_hold = 0; } /* Dequeue jobs and free LLIs */ if (plchan->at) { From d0d3bc65afcdd69bdd3b5bebdf8b3ee3680efa0e Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Tue, 24 Apr 2012 15:00:53 -0700 Subject: [PATCH 174/365] x86/mrst: Quiet sparse noise about plain integer as NULL pointer The second parameter to intel_scu_notifier_post is a void *, not an integer. This quiets the sparse noise: arch/x86/platform/mrst/mrst.c:808:48: warning: Using plain integer as NULL pointer arch/x86/platform/mrst/mrst.c:817:43: warning: Using plain integer as NULL pointer Signed-off-by: H Hartley Sweeten Acked-by: Alan Cox Link: http://lkml.kernel.org/r/201204241500.53685.hartleys@visionengravers.com Signed-off-by: Ingo Molnar --- arch/x86/platform/mrst/mrst.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/platform/mrst/mrst.c b/arch/x86/platform/mrst/mrst.c index e0a37233c0af..e31bcd8f2eee 100644 --- a/arch/x86/platform/mrst/mrst.c +++ b/arch/x86/platform/mrst/mrst.c @@ -805,7 +805,7 @@ void intel_scu_devices_create(void) } else i2c_register_board_info(i2c_bus[i], i2c_devs[i], 1); } - intel_scu_notifier_post(SCU_AVAILABLE, 0L); + intel_scu_notifier_post(SCU_AVAILABLE, NULL); } EXPORT_SYMBOL_GPL(intel_scu_devices_create); @@ -814,7 +814,7 @@ void intel_scu_devices_destroy(void) { int i; - intel_scu_notifier_post(SCU_DOWN, 0L); + intel_scu_notifier_post(SCU_DOWN, NULL); for (i = 0; i < ipc_next_dev; i++) platform_device_del(ipc_devs[i]); From ea0dcf903e7d76aa5d483d876215fedcfdfe140f Mon Sep 17 00:00:00 2001 From: Greg Pearson Date: Tue, 24 Apr 2012 18:23:56 -0600 Subject: [PATCH 175/365] x86/apic: Use x2apic physical mode based on FADT setting Provide systems that do not support x2apic cluster mode a mechanism to select x2apic physical mode using the FADT FORCE_APIC_PHYSICAL_DESTINATION_MODE bit. Changes from v1: (based on Suresh's comments) - removed #ifdef CONFIG_ACPI - removed #include Signed-off-by: Greg Pearson Acked-by: Suresh Siddha Link: http://lkml.kernel.org/r/1335313436-32020-1-git-send-email-greg.pearson@hp.com Signed-off-by: Ingo Molnar --- arch/x86/kernel/apic/x2apic_phys.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/x86/kernel/apic/x2apic_phys.c b/arch/x86/kernel/apic/x2apic_phys.c index 8a778db45e3a..991e315f4227 100644 --- a/arch/x86/kernel/apic/x2apic_phys.c +++ b/arch/x86/kernel/apic/x2apic_phys.c @@ -24,6 +24,12 @@ static int x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id) { if (x2apic_phys) return x2apic_enabled(); + else if ((acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID) && + (acpi_gbl_FADT.flags & ACPI_FADT_APIC_PHYSICAL) && + x2apic_enabled()) { + printk(KERN_DEBUG "System requires x2apic physical mode\n"); + return 1; + } else return 0; } From a99cd1125189aaf31a7ee505d6208143482119eb Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Fri, 6 Apr 2012 12:53:50 -0400 Subject: [PATCH 176/365] init: fix bug where environment vars can't be passed via boot args Commit 026cee0086f had the side-effect of dropping the '=' from the unknown boot arguments that are passed to init as environment variables. This is because parse_args() puts a NUL in the string where the '=' was when it passes the "param" and "val" pointers to the parsing subfunctions. Previously, unknown_bootoption() was the last parse_args() subfunction to run, and it carefully put back the '=' character. Now the ignore_unknown_bootoption() is the last one to run, and it wasn't doing the necessary repair, so the envp params ended up with the embedded NUL and were no longer seen as valid environment variables by init. Tested-by: Woody Suwalski Acked-by: Pawel Moll Signed-off-by: Chris Metcalf --- init/main.c | 25 +++++++++++++------------ 1 file changed, 13 insertions(+), 12 deletions(-) diff --git a/init/main.c b/init/main.c index 9d454f09f3b1..44b2433334c7 100644 --- a/init/main.c +++ b/init/main.c @@ -225,13 +225,9 @@ static int __init loglevel(char *str) early_param("loglevel", loglevel); -/* - * Unknown boot options get handed to init, unless they look like - * unused parameters (modprobe will find them in /proc/cmdline). - */ -static int __init unknown_bootoption(char *param, char *val) +/* Change NUL term back to "=", to make "param" the whole string. */ +static int __init repair_env_string(char *param, char *val) { - /* Change NUL term back to "=", to make "param" the whole string. */ if (val) { /* param=val or param="val"? */ if (val == param+strlen(param)+1) @@ -243,6 +239,16 @@ static int __init unknown_bootoption(char *param, char *val) } else BUG(); } + return 0; +} + +/* + * Unknown boot options get handed to init, unless they look like + * unused parameters (modprobe will find them in /proc/cmdline). + */ +static int __init unknown_bootoption(char *param, char *val) +{ + repair_env_string(param, val); /* Handle obsolete-style parameters */ if (obsolete_checksetup(param)) @@ -732,11 +738,6 @@ static char *initcall_level_names[] __initdata = { "late parameters", }; -static int __init ignore_unknown_bootoption(char *param, char *val) -{ - return 0; -} - static void __init do_initcall_level(int level) { extern const struct kernel_param __start___param[], __stop___param[]; @@ -747,7 +748,7 @@ static void __init do_initcall_level(int level) static_command_line, __start___param, __stop___param - __start___param, level, level, - ignore_unknown_bootoption); + repair_env_string); for (fn = initcall_levels[level]; fn < initcall_levels[level+1]; fn++) do_one_initcall(*fn); From 05ef1b79d46347f94d9a78214cc745046c03e45a Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Wed, 25 Apr 2012 12:45:26 -0400 Subject: [PATCH 177/365] arch/tile: fix a couple of functions that should be __init They were marked __devinit by mistake, causing some warnings at link time. Signed-off-by: Chris Metcalf --- arch/tile/include/asm/pci.h | 4 ++-- arch/tile/kernel/pci.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/tile/include/asm/pci.h b/arch/tile/include/asm/pci.h index 5d5a635530bd..32e6cbe8dff3 100644 --- a/arch/tile/include/asm/pci.h +++ b/arch/tile/include/asm/pci.h @@ -47,8 +47,8 @@ struct pci_controller { */ #define PCI_DMA_BUS_IS_PHYS 1 -int __devinit tile_pci_init(void); -int __devinit pcibios_init(void); +int __init tile_pci_init(void); +int __init pcibios_init(void); static inline void pci_iounmap(struct pci_dev *dev, void __iomem *addr) {} diff --git a/arch/tile/kernel/pci.c b/arch/tile/kernel/pci.c index a1bb59eecc18..b56d12bf5900 100644 --- a/arch/tile/kernel/pci.c +++ b/arch/tile/kernel/pci.c @@ -141,7 +141,7 @@ static int __devinit tile_init_irqs(int controller_id, * * Returns the number of controllers discovered. */ -int __devinit tile_pci_init(void) +int __init tile_pci_init(void) { int i; @@ -287,7 +287,7 @@ static void __devinit fixup_read_and_payload_sizes(void) * The controllers have been set up by the time we get here, by a call to * tile_pci_init. */ -int __devinit pcibios_init(void) +int __init pcibios_init(void) { int i; From a05a4830a32ef9f89e7bd372a7bae9b96b1ac266 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Wed, 25 Apr 2012 12:46:50 -0400 Subject: [PATCH 178/365] keys: update the documentation with info about "logon" keys Acked-by: David Howells Signed-off-by: Jeff Layton --- Documentation/security/keys.txt | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/Documentation/security/keys.txt b/Documentation/security/keys.txt index 787717091421..d389acd31e19 100644 --- a/Documentation/security/keys.txt +++ b/Documentation/security/keys.txt @@ -123,7 +123,7 @@ KEY SERVICE OVERVIEW The key service provides a number of features besides keys: - (*) The key service defines two special key types: + (*) The key service defines three special key types: (+) "keyring" @@ -137,6 +137,18 @@ The key service provides a number of features besides keys: blobs of data. These can be created, updated and read by userspace, and aren't intended for use by kernel services. + (+) "logon" + + Like a "user" key, a "logon" key has a payload that is an arbitrary + blob of data. It is intended as a place to store secrets which are + accessible to the kernel but not to userspace programs. + + The description can be arbitrary, but must be prefixed with a non-zero + length string that describes the key "subclass". The subclass is + separated from the rest of the description by a ':'. "logon" keys can + be created and updated from userspace, but the payload is only + readable from kernel space. + (*) Each process subscribes to three keyrings: a thread-specific keyring, a process-specific keyring, and a session-specific keyring. From da3a9e9e7b8341cfc939818103cb7ef9f5293de2 Mon Sep 17 00:00:00 2001 From: Benjamin Poirier Date: Wed, 25 Apr 2012 04:49:20 +0000 Subject: [PATCH 179/365] tlan: add cast needed for proper 64 bit operation Changes this beauty into a statement that actually has an effect on amd64. Tested-by: Per Jessen Signed-off-by: Benjamin Poirier Signed-off-by: David S. Miller --- drivers/net/ethernet/ti/tlan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/ti/tlan.c b/drivers/net/ethernet/ti/tlan.c index 817ad3bc4957..efd36691ce54 100644 --- a/drivers/net/ethernet/ti/tlan.c +++ b/drivers/net/ethernet/ti/tlan.c @@ -228,7 +228,7 @@ tlan_get_skb(const struct tlan_list *tag) unsigned long addr; addr = tag->buffer[9].address; - addr |= (tag->buffer[8].address << 16) << 16; + addr |= ((unsigned long) tag->buffer[8].address << 16) << 16; return (struct sk_buff *) addr; } From f891ea1634ce41f5f47ae40d8594809f4cd2ca66 Mon Sep 17 00:00:00 2001 From: Matt Carlson Date: Tue, 24 Apr 2012 13:37:01 +0000 Subject: [PATCH 180/365] tg3: Avoid panic from reserved statblk field access When RSS is enabled, interrupt vector 0 does not receive any rx traffic. The rx producer index fields for vector 0's status block should be considered reserved in this case. This patch changes the code to respect these reserved fields, which avoids a kernel panic when these fields take on non-zero values. Signed-off-by: Matt Carlson Signed-off-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/ethernet/broadcom/tg3.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index 062ac333fde6..ceeab8e852ef 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -879,8 +879,13 @@ static inline unsigned int tg3_has_work(struct tg3_napi *tnapi) if (sblk->status & SD_STATUS_LINK_CHG) work_exists = 1; } - /* check for RX/TX work to do */ - if (sblk->idx[0].tx_consumer != tnapi->tx_cons || + + /* check for TX work to do */ + if (sblk->idx[0].tx_consumer != tnapi->tx_cons) + work_exists = 1; + + /* check for RX work to do */ + if (tnapi->rx_rcb_prod_idx && *(tnapi->rx_rcb_prod_idx) != tnapi->rx_rcb_ptr) work_exists = 1; @@ -6124,6 +6129,9 @@ static int tg3_poll_work(struct tg3_napi *tnapi, int work_done, int budget) return work_done; } + if (!tnapi->rx_rcb_prod_idx) + return work_done; + /* run RX thread, within the bounds set by NAPI. * All RX "locking" is done by ensuring outside * code synchronizes with tg3->napi.poll() @@ -7567,6 +7575,12 @@ static int tg3_alloc_consistent(struct tg3 *tp) */ switch (i) { default: + if (tg3_flag(tp, ENABLE_RSS)) { + tnapi->rx_rcb_prod_idx = NULL; + break; + } + /* Fall through */ + case 1: tnapi->rx_rcb_prod_idx = &sblk->idx[0].rx_producer; break; case 2: From c95eeae9e39314273bcda057f27100603d333518 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Thu, 5 Apr 2012 16:15:24 +0200 Subject: [PATCH 181/365] i2c: mxs: handle spurious interrupt After an error interrupt setting cmd->err, I see another interrupt that the data engine is empty which clears cmd->err before being processed. So, clear cmd->err at the beginning of a transfer only to handle these consecutive interrupts. Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-mxs.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c index 3d471d56bf15..4c37347973e6 100644 --- a/drivers/i2c/busses/i2c-mxs.c +++ b/drivers/i2c/busses/i2c-mxs.c @@ -227,6 +227,7 @@ static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, return -EINVAL; init_completion(&i2c->cmd_complete); + i2c->cmd_err = 0; flags = stop ? MXS_I2C_CTRL0_POST_SEND_STOP : 0; @@ -299,8 +300,6 @@ static irqreturn_t mxs_i2c_isr(int this_irq, void *dev_id) MXS_I2C_CTRL1_SLAVE_STOP_IRQ | MXS_I2C_CTRL1_SLAVE_IRQ)) /* MXS_I2C_CTRL1_OVERSIZE_XFER_TERM_IRQ is only for slaves */ i2c->cmd_err = -EIO; - else - i2c->cmd_err = 0; is_last_cmd = (readl(i2c->regs + MXS_I2C_QUEUESTAT) & MXS_I2C_QUEUESTAT_WRITE_QUEUE_CNT_MASK) == 0; From 62ad6fcd743792bf294f2a7ba26ab8f462065150 Mon Sep 17 00:00:00 2001 From: Shan Wei Date: Tue, 24 Apr 2012 18:15:41 +0000 Subject: [PATCH 182/365] udp_diag: implement idiag_get_info for udp/udplite to get queue information When we use netlink to monitor queue information for udp socket, idiag_rqueue and idiag_wqueue of inet_diag_msg are returned with 0. Keep consistent with netstat, just return back allocated rmem/wmem size. Signed-off-by: Shan Wei Acked-by: Pavel Emelyanov Signed-off-by: David S. Miller --- net/ipv4/inet_diag.c | 2 +- net/ipv4/udp_diag.c | 9 +++++++++ 2 files changed, 10 insertions(+), 1 deletion(-) diff --git a/net/ipv4/inet_diag.c b/net/ipv4/inet_diag.c index 8d25a1c557eb..8f8db724bfaf 100644 --- a/net/ipv4/inet_diag.c +++ b/net/ipv4/inet_diag.c @@ -141,7 +141,7 @@ int inet_sk_diag_fill(struct sock *sk, struct inet_connection_sock *icsk, goto rtattr_failure; if (icsk == NULL) { - r->idiag_rqueue = r->idiag_wqueue = 0; + handler->idiag_get_info(sk, r, NULL); goto out; } diff --git a/net/ipv4/udp_diag.c b/net/ipv4/udp_diag.c index 8a949f19deb6..a7f86a3cd502 100644 --- a/net/ipv4/udp_diag.c +++ b/net/ipv4/udp_diag.c @@ -146,9 +146,17 @@ static int udp_diag_dump_one(struct sk_buff *in_skb, const struct nlmsghdr *nlh, return udp_dump_one(&udp_table, in_skb, nlh, req); } +static void udp_diag_get_info(struct sock *sk, struct inet_diag_msg *r, + void *info) +{ + r->idiag_rqueue = sk_rmem_alloc_get(sk); + r->idiag_wqueue = sk_wmem_alloc_get(sk); +} + static const struct inet_diag_handler udp_diag_handler = { .dump = udp_diag_dump, .dump_one = udp_diag_dump_one, + .idiag_get_info = udp_diag_get_info, .idiag_type = IPPROTO_UDP, }; @@ -167,6 +175,7 @@ static int udplite_diag_dump_one(struct sk_buff *in_skb, const struct nlmsghdr * static const struct inet_diag_handler udplite_diag_handler = { .dump = udplite_diag_dump, .dump_one = udplite_diag_dump_one, + .idiag_get_info = udp_diag_get_info, .idiag_type = IPPROTO_UDPLITE, }; From 4e1c2b284461fd8aa8d7b295a1e911fc4390755b Mon Sep 17 00:00:00 2001 From: David Miller Date: Wed, 25 Apr 2012 16:10:50 -0400 Subject: [PATCH 183/365] mm: nobootmem: Correct alloc_bootmem semantics. The comments above __alloc_bootmem_node() claim that the code will first try the allocation using 'goal' and if that fails it will try again but with the 'goal' requirement dropped. Unfortunately, this is not what the code does, so fix it to do so. This is important for nobootmem conversions to architectures such as sparc where MAX_DMA_ADDRESS is infinity. On such architectures all of the allocations done by generic spots, such as the sparse-vmemmap implementation, will pass in: __pa(MAX_DMA_ADDRESS) as the goal, and with the limit given as "-1" this will always fail unless we add the appropriate fallback logic here. Signed-off-by: David S. Miller Acked-by: Yinghai Lu Signed-off-by: Linus Torvalds --- mm/nobootmem.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/mm/nobootmem.c b/mm/nobootmem.c index 24f0fc1a56d6..e53bb8a256b1 100644 --- a/mm/nobootmem.c +++ b/mm/nobootmem.c @@ -298,13 +298,19 @@ void * __init __alloc_bootmem_node(pg_data_t *pgdat, unsigned long size, if (WARN_ON_ONCE(slab_is_available())) return kzalloc_node(size, GFP_NOWAIT, pgdat->node_id); +again: ptr = __alloc_memory_core_early(pgdat->node_id, size, align, goal, -1ULL); if (ptr) return ptr; - return __alloc_memory_core_early(MAX_NUMNODES, size, align, - goal, -1ULL); + ptr = __alloc_memory_core_early(MAX_NUMNODES, size, align, + goal, -1ULL); + if (!ptr && goal) { + goal = 0; + goto again; + } + return ptr; } void * __init __alloc_bootmem_node_high(pg_data_t *pgdat, unsigned long size, From ce587e65e8c669eec61df7fb1c515720302e3cc0 Mon Sep 17 00:00:00 2001 From: Johannes Weiner Date: Tue, 24 Apr 2012 20:22:33 +0200 Subject: [PATCH 184/365] mm: memcg: move pc lookup point to commit_charge() None of the callsites actually need the page_cgroup descriptor themselves, so just pass the page and do the look up in there. We already had two bugs (6568d4a 'mm: memcg: update the correct soft limit tree during migration' and 'memcg: fix Bad page state after replace_page_cache') where the passed page and pc were not referring to the same page frame. Signed-off-by: Johannes Weiner Acked-by: Hugh Dickins Signed-off-by: Linus Torvalds --- mm/memcontrol.c | 17 +++++------------ 1 file changed, 5 insertions(+), 12 deletions(-) diff --git a/mm/memcontrol.c b/mm/memcontrol.c index b868def9bcc1..31ab9c3f0178 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -2476,10 +2476,10 @@ struct mem_cgroup *try_get_mem_cgroup_from_page(struct page *page) static void __mem_cgroup_commit_charge(struct mem_cgroup *memcg, struct page *page, unsigned int nr_pages, - struct page_cgroup *pc, enum charge_type ctype, bool lrucare) { + struct page_cgroup *pc = lookup_page_cgroup(page); struct zone *uninitialized_var(zone); bool was_on_lru = false; bool anon; @@ -2716,7 +2716,6 @@ static int mem_cgroup_charge_common(struct page *page, struct mm_struct *mm, { struct mem_cgroup *memcg = NULL; unsigned int nr_pages = 1; - struct page_cgroup *pc; bool oom = true; int ret; @@ -2730,11 +2729,10 @@ static int mem_cgroup_charge_common(struct page *page, struct mm_struct *mm, oom = false; } - pc = lookup_page_cgroup(page); ret = __mem_cgroup_try_charge(mm, gfp_mask, nr_pages, &memcg, oom); if (ret == -ENOMEM) return ret; - __mem_cgroup_commit_charge(memcg, page, nr_pages, pc, ctype, false); + __mem_cgroup_commit_charge(memcg, page, nr_pages, ctype, false); return 0; } @@ -2831,16 +2829,13 @@ static void __mem_cgroup_commit_charge_swapin(struct page *page, struct mem_cgroup *memcg, enum charge_type ctype) { - struct page_cgroup *pc; - if (mem_cgroup_disabled()) return; if (!memcg) return; cgroup_exclude_rmdir(&memcg->css); - pc = lookup_page_cgroup(page); - __mem_cgroup_commit_charge(memcg, page, 1, pc, ctype, true); + __mem_cgroup_commit_charge(memcg, page, 1, ctype, true); /* * Now swap is on-memory. This means this page may be * counted both as mem and swap....double count. @@ -3298,14 +3293,13 @@ int mem_cgroup_prepare_migration(struct page *page, * page. In the case new page is migrated but not remapped, new page's * mapcount will be finally 0 and we call uncharge in end_migration(). */ - pc = lookup_page_cgroup(newpage); if (PageAnon(page)) ctype = MEM_CGROUP_CHARGE_TYPE_MAPPED; else if (page_is_file_cache(page)) ctype = MEM_CGROUP_CHARGE_TYPE_CACHE; else ctype = MEM_CGROUP_CHARGE_TYPE_SHMEM; - __mem_cgroup_commit_charge(memcg, newpage, 1, pc, ctype, false); + __mem_cgroup_commit_charge(memcg, newpage, 1, ctype, false); return ret; } @@ -3392,8 +3386,7 @@ void mem_cgroup_replace_page_cache(struct page *oldpage, * the newpage may be on LRU(or pagevec for LRU) already. We lock * LRU while we overwrite pc->mem_cgroup. */ - pc = lookup_page_cgroup(newpage); - __mem_cgroup_commit_charge(memcg, newpage, 1, pc, type, true); + __mem_cgroup_commit_charge(memcg, newpage, 1, type, true); } #ifdef CONFIG_DEBUG_VM From b1c12cbcd0a02527c180a862e8971e249d3b347d Mon Sep 17 00:00:00 2001 From: Konstantin Khlebnikov Date: Wed, 25 Apr 2012 16:01:46 -0700 Subject: [PATCH 185/365] mm/hugetlb: fix warning in alloc_huge_page/dequeue_huge_page_vma Fix a gcc warning (and bug?) introduced in cc9a6c877 ("cpuset: mm: reduce large amounts of memory barrier related damage v3") Local variable "page" can be uninitialized if the nodemask from vma policy does not intersects with nodemask from cpuset. Even if it doesn't happens it is better to initialize this variable explicitly than to introduce a kernel oops in a weird corner case. mm/hugetlb.c: In function `alloc_huge_page': mm/hugetlb.c:1135:5: warning: `page' may be used uninitialized in this function Signed-off-by: Konstantin Khlebnikov Acked-by: Mel Gorman Acked-by: David Rientjes Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/hugetlb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/hugetlb.c b/mm/hugetlb.c index cd65cb19c941..5a16423a512c 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -532,7 +532,7 @@ static struct page *dequeue_huge_page_vma(struct hstate *h, struct vm_area_struct *vma, unsigned long address, int avoid_reserve) { - struct page *page; + struct page *page = NULL; struct mempolicy *mpol; nodemask_t *nodemask; struct zonelist *zonelist; From 13d518074a952d33d47c428419693f63389547e9 Mon Sep 17 00:00:00 2001 From: Jason Baron Date: Wed, 25 Apr 2012 16:01:47 -0700 Subject: [PATCH 186/365] epoll: clear the tfile_check_list on -ELOOP An epoll_ctl(,EPOLL_CTL_ADD,,) operation can return '-ELOOP' to prevent circular epoll dependencies from being created. However, in that case we do not properly clear the 'tfile_check_list'. Thus, add a call to clear_tfile_check_list() for the -ELOOP case. Signed-off-by: Jason Baron Reported-by: Yurij M. Plotnikov Cc: Nelson Elhage Cc: Davide Libenzi Tested-by: Alexandra N. Kossovsky Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/eventpoll.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/eventpoll.c b/fs/eventpoll.c index 739b0985b398..c0b3c70ee87a 100644 --- a/fs/eventpoll.c +++ b/fs/eventpoll.c @@ -1663,8 +1663,10 @@ SYSCALL_DEFINE4(epoll_ctl, int, epfd, int, op, int, fd, if (op == EPOLL_CTL_ADD) { if (is_file_epoll(tfile)) { error = -ELOOP; - if (ep_loop_check(ep, tfile) != 0) + if (ep_loop_check(ep, tfile) != 0) { + clear_tfile_check_list(); goto error_tgt_fput; + } } else list_add(&tfile->f_tfile_llink, &tfile_check_list); } From 904249aa68010c8e223263c922fcbb840a3f42e4 Mon Sep 17 00:00:00 2001 From: Ying Han Date: Wed, 25 Apr 2012 16:01:48 -0700 Subject: [PATCH 187/365] mm: fix up the vmscan stat in vmstat The "pgsteal" stat is confusing because it counts both direct reclaim as well as background reclaim. However, we have "kswapd_steal" which also counts background reclaim value. This patch fixes it and also makes it match the existng "pgscan_" stats. Test: pgsteal_kswapd_dma32 447623 pgsteal_kswapd_normal 42272677 pgsteal_kswapd_movable 0 pgsteal_direct_dma32 2801 pgsteal_direct_normal 44353270 pgsteal_direct_movable 0 Signed-off-by: Ying Han Reviewed-by: Rik van Riel Acked-by: Christoph Lameter Cc: Johannes Weiner Cc: Michal Hocko Cc: Mel Gorman Acked-by: KAMEZAWA Hiroyuki Cc: Hillf Danton Cc: Hugh Dickins Cc: Dan Magenheimer Reviewed-by: Minchan Kim Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/vm_event_item.h | 5 +++-- mm/vmscan.c | 11 ++++++++--- mm/vmstat.c | 4 ++-- 3 files changed, 13 insertions(+), 7 deletions(-) diff --git a/include/linux/vm_event_item.h b/include/linux/vm_event_item.h index 03b90cdc1921..06f8e3858251 100644 --- a/include/linux/vm_event_item.h +++ b/include/linux/vm_event_item.h @@ -26,13 +26,14 @@ enum vm_event_item { PGPGIN, PGPGOUT, PSWPIN, PSWPOUT, PGFREE, PGACTIVATE, PGDEACTIVATE, PGFAULT, PGMAJFAULT, FOR_ALL_ZONES(PGREFILL), - FOR_ALL_ZONES(PGSTEAL), + FOR_ALL_ZONES(PGSTEAL_KSWAPD), + FOR_ALL_ZONES(PGSTEAL_DIRECT), FOR_ALL_ZONES(PGSCAN_KSWAPD), FOR_ALL_ZONES(PGSCAN_DIRECT), #ifdef CONFIG_NUMA PGSCAN_ZONE_RECLAIM_FAILED, #endif - PGINODESTEAL, SLABS_SCANNED, KSWAPD_STEAL, KSWAPD_INODESTEAL, + PGINODESTEAL, SLABS_SCANNED, KSWAPD_INODESTEAL, KSWAPD_LOW_WMARK_HIT_QUICKLY, KSWAPD_HIGH_WMARK_HIT_QUICKLY, KSWAPD_SKIP_CONGESTION_WAIT, PAGEOUTRUN, ALLOCSTALL, PGROTATED, diff --git a/mm/vmscan.c b/mm/vmscan.c index 1a518684a32f..33dc256033b5 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -1568,9 +1568,14 @@ shrink_inactive_list(unsigned long nr_to_scan, struct mem_cgroup_zone *mz, reclaim_stat->recent_scanned[0] += nr_anon; reclaim_stat->recent_scanned[1] += nr_file; - if (current_is_kswapd()) - __count_vm_events(KSWAPD_STEAL, nr_reclaimed); - __count_zone_vm_events(PGSTEAL, zone, nr_reclaimed); + if (global_reclaim(sc)) { + if (current_is_kswapd()) + __count_zone_vm_events(PGSTEAL_KSWAPD, zone, + nr_reclaimed); + else + __count_zone_vm_events(PGSTEAL_DIRECT, zone, + nr_reclaimed); + } putback_inactive_pages(mz, &page_list); diff --git a/mm/vmstat.c b/mm/vmstat.c index f600557a7659..7db1b9bab492 100644 --- a/mm/vmstat.c +++ b/mm/vmstat.c @@ -738,7 +738,8 @@ const char * const vmstat_text[] = { "pgmajfault", TEXTS_FOR_ZONES("pgrefill") - TEXTS_FOR_ZONES("pgsteal") + TEXTS_FOR_ZONES("pgsteal_kswapd") + TEXTS_FOR_ZONES("pgsteal_direct") TEXTS_FOR_ZONES("pgscan_kswapd") TEXTS_FOR_ZONES("pgscan_direct") @@ -747,7 +748,6 @@ const char * const vmstat_text[] = { #endif "pginodesteal", "slabs_scanned", - "kswapd_steal", "kswapd_inodesteal", "kswapd_low_wmark_hit_quickly", "kswapd_high_wmark_hit_quickly", From 61065a30af8df4b8989c2ac7a1f4b4034e4df2d5 Mon Sep 17 00:00:00 2001 From: Glauber Costa Date: Wed, 25 Apr 2012 16:01:48 -0700 Subject: [PATCH 188/365] fs/buffer.c: remove BUG() in possible but rare condition While stressing the kernel with with failing allocations today, I hit the following chain of events: alloc_page_buffers(): bh = alloc_buffer_head(GFP_NOFS); if (!bh) goto no_grow; <= path taken grow_dev_page(): bh = alloc_page_buffers(page, size, 0); if (!bh) goto failed; <= taken, consequence of the above and then the failed path BUG()s the kernel. The failure is inserted a litte bit artificially, but even then, I see no reason why it should be deemed impossible in a real box. Even though this is not a condition that we expect to see around every time, failed allocations are expected to be handled, and BUG() sounds just too much. As a matter of fact, grow_dev_page() can return NULL just fine in other circumstances, so I propose we just remove it, then. Signed-off-by: Glauber Costa Cc: Michal Hocko Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/buffer.c | 1 - 1 file changed, 1 deletion(-) diff --git a/fs/buffer.c b/fs/buffer.c index 36d66653b931..351e18ea2e53 100644 --- a/fs/buffer.c +++ b/fs/buffer.c @@ -985,7 +985,6 @@ grow_dev_page(struct block_device *bdev, sector_t block, return page; failed: - BUG(); unlock_page(page); page_cache_release(page); return NULL; From e39a9ba2889edbfbda4a9336ea718b2e25a9c2b2 Mon Sep 17 00:00:00 2001 From: Clay Carpenter Date: Wed, 25 Apr 2012 16:01:49 -0700 Subject: [PATCH 189/365] acerhdf: add support for Aspire 1410 BIOS v1.3314 Add support for Aspire 1410 BIOS v1.3314. Fixes the following error: acerhdf: unknown (unsupported) BIOS version Acer/Aspire 1410/v1.3314, please report, aborting! Signed-off-by: Clay Carpenter Signed-off-by: Peter Feuerer Cc: Matthew Garrett Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/platform/x86/acerhdf.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c index bc8384c6f3eb..9a1934964977 100644 --- a/drivers/platform/x86/acerhdf.c +++ b/drivers/platform/x86/acerhdf.c @@ -161,6 +161,7 @@ static const struct bios_settings_t bios_tbl[] = { {"Acer", "Aspire 1410", "v1.3303", 0x55, 0x58, {0x9e, 0x00} }, {"Acer", "Aspire 1410", "v1.3308", 0x55, 0x58, {0x9e, 0x00} }, {"Acer", "Aspire 1410", "v1.3310", 0x55, 0x58, {0x9e, 0x00} }, + {"Acer", "Aspire 1410", "v1.3314", 0x55, 0x58, {0x9e, 0x00} }, /* Acer 1810xx */ {"Acer", "Aspire 1810TZ", "v0.3108", 0x55, 0x58, {0x9e, 0x00} }, {"Acer", "Aspire 1810T", "v0.3108", 0x55, 0x58, {0x9e, 0x00} }, From 43ae1e32e0b540fa04f059b7aa3b4f5cf49fc9ad Mon Sep 17 00:00:00 2001 From: Peter Feuerer Date: Wed, 25 Apr 2012 16:01:49 -0700 Subject: [PATCH 190/365] acerhdf: add support for new hardware Add support for new hardware: Acer Aspire LT-10Q/531/751/1810/1825, Acer Travelmate 7730, Packard Bell ENBFT/DOTVR46 Signed-off-by: Peter Feuerer Acked-by: Borislav Petkov Cc: Matthew Garrett Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/platform/x86/acerhdf.c | 62 +++++++++++++++++++++++----------- 1 file changed, 42 insertions(+), 20 deletions(-) diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c index 9a1934964977..c697d807ea0d 100644 --- a/drivers/platform/x86/acerhdf.c +++ b/drivers/platform/x86/acerhdf.c @@ -50,7 +50,7 @@ */ #undef START_IN_KERNEL_MODE -#define DRV_VER "0.5.24" +#define DRV_VER "0.5.26" /* * According to the Atom N270 datasheet, @@ -150,6 +150,8 @@ static const struct bios_settings_t bios_tbl[] = { {"Acer", "AOA150", "v0.3308", 0x55, 0x58, {0x20, 0x00} }, {"Acer", "AOA150", "v0.3309", 0x55, 0x58, {0x20, 0x00} }, {"Acer", "AOA150", "v0.3310", 0x55, 0x58, {0x20, 0x00} }, + /* LT1005u */ + {"Acer", "LT-10Q", "v0.3310", 0x55, 0x58, {0x20, 0x00} }, /* Acer 1410 */ {"Acer", "Aspire 1410", "v0.3108", 0x55, 0x58, {0x9e, 0x00} }, {"Acer", "Aspire 1410", "v0.3113", 0x55, 0x58, {0x9e, 0x00} }, @@ -184,29 +186,44 @@ static const struct bios_settings_t bios_tbl[] = { {"Acer", "Aspire 1810TZ", "v1.3310", 0x55, 0x58, {0x9e, 0x00} }, {"Acer", "Aspire 1810T", "v1.3310", 0x55, 0x58, {0x9e, 0x00} }, {"Acer", "Aspire 1810TZ", "v1.3314", 0x55, 0x58, {0x9e, 0x00} }, + {"Acer", "Aspire 1810T", "v1.3314", 0x55, 0x58, {0x9e, 0x00} }, /* Acer 531 */ + {"Acer", "AO531h", "v0.3104", 0x55, 0x58, {0x20, 0x00} }, {"Acer", "AO531h", "v0.3201", 0x55, 0x58, {0x20, 0x00} }, + {"Acer", "AO531h", "v0.3304", 0x55, 0x58, {0x20, 0x00} }, + /* Acer 751 */ + {"Acer", "AO751h", "V0.3212", 0x55, 0x58, {0x21, 0x00} }, + /* Acer 1825 */ + {"Acer", "Aspire 1825PTZ", "V1.3118", 0x55, 0x58, {0x9e, 0x00} }, + {"Acer", "Aspire 1825PTZ", "V1.3127", 0x55, 0x58, {0x9e, 0x00} }, + /* Acer TravelMate 7730 */ + {"Acer", "TravelMate 7730G", "v0.3509", 0x55, 0x58, {0xaf, 0x00} }, /* Gateway */ - {"Gateway", "AOA110", "v0.3103", 0x55, 0x58, {0x21, 0x00} }, - {"Gateway", "AOA150", "v0.3103", 0x55, 0x58, {0x20, 0x00} }, - {"Gateway", "LT31", "v1.3103", 0x55, 0x58, {0x9e, 0x00} }, - {"Gateway", "LT31", "v1.3201", 0x55, 0x58, {0x9e, 0x00} }, - {"Gateway", "LT31", "v1.3302", 0x55, 0x58, {0x9e, 0x00} }, + {"Gateway", "AOA110", "v0.3103", 0x55, 0x58, {0x21, 0x00} }, + {"Gateway", "AOA150", "v0.3103", 0x55, 0x58, {0x20, 0x00} }, + {"Gateway", "LT31", "v1.3103", 0x55, 0x58, {0x9e, 0x00} }, + {"Gateway", "LT31", "v1.3201", 0x55, 0x58, {0x9e, 0x00} }, + {"Gateway", "LT31", "v1.3302", 0x55, 0x58, {0x9e, 0x00} }, + {"Gateway", "LT31", "v1.3303t", 0x55, 0x58, {0x9e, 0x00} }, /* Packard Bell */ - {"Packard Bell", "DOA150", "v0.3104", 0x55, 0x58, {0x21, 0x00} }, - {"Packard Bell", "DOA150", "v0.3105", 0x55, 0x58, {0x20, 0x00} }, - {"Packard Bell", "AOA110", "v0.3105", 0x55, 0x58, {0x21, 0x00} }, - {"Packard Bell", "AOA150", "v0.3105", 0x55, 0x58, {0x20, 0x00} }, - {"Packard Bell", "DOTMU", "v1.3303", 0x55, 0x58, {0x9e, 0x00} }, - {"Packard Bell", "DOTMU", "v0.3120", 0x55, 0x58, {0x9e, 0x00} }, - {"Packard Bell", "DOTMU", "v0.3108", 0x55, 0x58, {0x9e, 0x00} }, - {"Packard Bell", "DOTMU", "v0.3113", 0x55, 0x58, {0x9e, 0x00} }, - {"Packard Bell", "DOTMU", "v0.3115", 0x55, 0x58, {0x9e, 0x00} }, - {"Packard Bell", "DOTMU", "v0.3117", 0x55, 0x58, {0x9e, 0x00} }, - {"Packard Bell", "DOTMU", "v0.3119", 0x55, 0x58, {0x9e, 0x00} }, - {"Packard Bell", "DOTMU", "v1.3204", 0x55, 0x58, {0x9e, 0x00} }, - {"Packard Bell", "DOTMA", "v1.3201", 0x55, 0x58, {0x9e, 0x00} }, - {"Packard Bell", "DOTMA", "v1.3302", 0x55, 0x58, {0x9e, 0x00} }, + {"Packard Bell", "DOA150", "v0.3104", 0x55, 0x58, {0x21, 0x00} }, + {"Packard Bell", "DOA150", "v0.3105", 0x55, 0x58, {0x20, 0x00} }, + {"Packard Bell", "AOA110", "v0.3105", 0x55, 0x58, {0x21, 0x00} }, + {"Packard Bell", "AOA150", "v0.3105", 0x55, 0x58, {0x20, 0x00} }, + {"Packard Bell", "ENBFT", "V1.3118", 0x55, 0x58, {0x9e, 0x00} }, + {"Packard Bell", "ENBFT", "V1.3127", 0x55, 0x58, {0x9e, 0x00} }, + {"Packard Bell", "DOTMU", "v1.3303", 0x55, 0x58, {0x9e, 0x00} }, + {"Packard Bell", "DOTMU", "v0.3120", 0x55, 0x58, {0x9e, 0x00} }, + {"Packard Bell", "DOTMU", "v0.3108", 0x55, 0x58, {0x9e, 0x00} }, + {"Packard Bell", "DOTMU", "v0.3113", 0x55, 0x58, {0x9e, 0x00} }, + {"Packard Bell", "DOTMU", "v0.3115", 0x55, 0x58, {0x9e, 0x00} }, + {"Packard Bell", "DOTMU", "v0.3117", 0x55, 0x58, {0x9e, 0x00} }, + {"Packard Bell", "DOTMU", "v0.3119", 0x55, 0x58, {0x9e, 0x00} }, + {"Packard Bell", "DOTMU", "v1.3204", 0x55, 0x58, {0x9e, 0x00} }, + {"Packard Bell", "DOTMA", "v1.3201", 0x55, 0x58, {0x9e, 0x00} }, + {"Packard Bell", "DOTMA", "v1.3302", 0x55, 0x58, {0x9e, 0x00} }, + {"Packard Bell", "DOTMA", "v1.3303t", 0x55, 0x58, {0x9e, 0x00} }, + {"Packard Bell", "DOTVR46", "v1.3308", 0x55, 0x58, {0x9e, 0x00} }, /* pewpew-terminator */ {"", "", "", 0, 0, {0, 0} } }; @@ -702,15 +719,20 @@ MODULE_LICENSE("GPL"); MODULE_AUTHOR("Peter Feuerer"); MODULE_DESCRIPTION("Aspire One temperature and fan driver"); MODULE_ALIAS("dmi:*:*Acer*:pnAOA*:"); +MODULE_ALIAS("dmi:*:*Acer*:pnAO751h*:"); MODULE_ALIAS("dmi:*:*Acer*:pnAspire*1410*:"); MODULE_ALIAS("dmi:*:*Acer*:pnAspire*1810*:"); +MODULE_ALIAS("dmi:*:*Acer*:pnAspire*1825PTZ:"); MODULE_ALIAS("dmi:*:*Acer*:pnAO531*:"); +MODULE_ALIAS("dmi:*:*Acer*:TravelMate*7730G:"); MODULE_ALIAS("dmi:*:*Gateway*:pnAOA*:"); MODULE_ALIAS("dmi:*:*Gateway*:pnLT31*:"); MODULE_ALIAS("dmi:*:*Packard*Bell*:pnAOA*:"); MODULE_ALIAS("dmi:*:*Packard*Bell*:pnDOA*:"); MODULE_ALIAS("dmi:*:*Packard*Bell*:pnDOTMU*:"); +MODULE_ALIAS("dmi:*:*Packard*Bell*:pnENBFT*:"); MODULE_ALIAS("dmi:*:*Packard*Bell*:pnDOTMA*:"); +MODULE_ALIAS("dmi:*:*Packard*Bell*:pnDOTVR46*:"); module_init(acerhdf_init); module_exit(acerhdf_exit); From 351963bb58af5717359544087b9f634c27b9b155 Mon Sep 17 00:00:00 2001 From: Peter Feuerer Date: Wed, 25 Apr 2012 16:01:49 -0700 Subject: [PATCH 191/365] acerhdf: lowered default temp fanon/fanoff values Due to new supported hardware, of which the actual temperature limits of processor, harddisk and other components are unknown, it feels safer with lower fanon / fanoff settings. It won't change much for most people, already using acerhdf, as they use their own fanon/fanoff variable settings when loading the module. Furthermore seems like kernel and userspace tools have been improved to work more efficient and netbooks don't get so hot anymore. Signed-off-by: Peter Feuerer Acked-by: Borislav Petkov Cc: Matthew Garrett Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/platform/x86/acerhdf.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c index c697d807ea0d..639db4d0aa76 100644 --- a/drivers/platform/x86/acerhdf.c +++ b/drivers/platform/x86/acerhdf.c @@ -83,8 +83,8 @@ static int kernelmode; #endif static unsigned int interval = 10; -static unsigned int fanon = 63000; -static unsigned int fanoff = 58000; +static unsigned int fanon = 60000; +static unsigned int fanoff = 53000; static unsigned int verbose; static unsigned int fanstate = ACERHDF_FAN_AUTO; static char force_bios[16]; From 65ed76010dfed3cb75c863c9052c367a1bacf80a Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Wed, 25 Apr 2012 16:01:50 -0700 Subject: [PATCH 192/365] hugetlbfs: lockdep annotate root inode properly This fixes the below reported false lockdep warning. e096d0c7e2e4 ("lockdep: Add helper function for dir vs file i_mutex annotation") added a similar annotation for every other inode in hugetlbfs but missed the root inode because it was allocated by a separate function. For HugeTLB fs we allow taking i_mutex in mmap. HugeTLB fs doesn't support file write and its file read callback is modified in a05b0855fd ("hugetlbfs: avoid taking i_mutex from hugetlbfs_read()") to not take i_mutex. Hence for HugeTLB fs with regular files we really don't take i_mutex with mmap_sem held. ====================================================== [ INFO: possible circular locking dependency detected ] 3.4.0-rc1+ #322 Not tainted ------------------------------------------------------- bash/1572 is trying to acquire lock: (&mm->mmap_sem){++++++}, at: [] might_fault+0x40/0x90 but task is already holding lock: (&sb->s_type->i_mutex_key#12){+.+.+.}, at: [] vfs_readdir+0x56/0xa8 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&sb->s_type->i_mutex_key#12){+.+.+.}: [] lock_acquire+0xd5/0xfa [] __mutex_lock_common+0x48/0x350 [] mutex_lock_nested+0x2a/0x31 [] hugetlbfs_file_mmap+0x7d/0x104 [] mmap_region+0x272/0x47d [] do_mmap_pgoff+0x294/0x2ee [] sys_mmap_pgoff+0xd2/0x10e [] sys_mmap+0x1d/0x1f [] system_call_fastpath+0x16/0x1b -> #0 (&mm->mmap_sem){++++++}: [] __lock_acquire+0xa81/0xd75 [] lock_acquire+0xd5/0xfa [] might_fault+0x6d/0x90 [] filldir+0x6a/0xc2 [] dcache_readdir+0x5c/0x222 [] vfs_readdir+0x76/0xa8 [] sys_getdents+0x79/0xc9 [] system_call_fastpath+0x16/0x1b other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&sb->s_type->i_mutex_key#12); lock(&mm->mmap_sem); lock(&sb->s_type->i_mutex_key#12); lock(&mm->mmap_sem); *** DEADLOCK *** 1 lock held by bash/1572: #0: (&sb->s_type->i_mutex_key#12){+.+.+.}, at: [] vfs_readdir+0x56/0xa8 stack backtrace: Pid: 1572, comm: bash Not tainted 3.4.0-rc1+ #322 Call Trace: [] print_circular_bug+0x1f8/0x209 [] __lock_acquire+0xa81/0xd75 [] ? handle_pte_fault+0x5ff/0x614 [] ? mark_lock+0x2d/0x258 [] ? might_fault+0x40/0x90 [] lock_acquire+0xd5/0xfa [] ? might_fault+0x40/0x90 [] ? __mutex_lock_common+0x333/0x350 [] might_fault+0x6d/0x90 [] ? might_fault+0x40/0x90 [] filldir+0x6a/0xc2 [] dcache_readdir+0x5c/0x222 [] ? sys_ioctl+0x74/0x74 [] ? sys_ioctl+0x74/0x74 [] ? sys_ioctl+0x74/0x74 [] vfs_readdir+0x76/0xa8 [] sys_getdents+0x79/0xc9 [] system_call_fastpath+0x16/0x1b Signed-off-by: Aneesh Kumar K.V Cc: Dave Jones Cc: Al Viro Cc: Josh Boyer Cc: Peter Zijlstra Cc: Mimi Zohar Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/hugetlbfs/inode.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/hugetlbfs/inode.c b/fs/hugetlbfs/inode.c index 28cf06e4ec84..001ef01d2fe2 100644 --- a/fs/hugetlbfs/inode.c +++ b/fs/hugetlbfs/inode.c @@ -485,6 +485,7 @@ static struct inode *hugetlbfs_get_root(struct super_block *sb, inode->i_fop = &simple_dir_operations; /* directory inodes start off with i_nlink == 2 (for "." entry) */ inc_nlink(inode); + lockdep_annotate_inode_mutex_key(inode); } return inode; } From db7b122cf5f769046d410f82a1e9fe7006ed955a Mon Sep 17 00:00:00 2001 From: Vasiliy Kulikov Date: Wed, 25 Apr 2012 16:01:51 -0700 Subject: [PATCH 193/365] arch/arm/mach-ux500/mbox-db5500.c: world-writable sysfs fifo file Don't allow everybody to use a modem. Signed-off-by: Vasiliy Kulikov Cc: Srinidhi Kasagar Acked-by: Linus Walleij Cc: Russell King Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- arch/arm/mach-ux500/mbox-db5500.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-ux500/mbox-db5500.c b/arch/arm/mach-ux500/mbox-db5500.c index 2b2d51caf9d8..0127490218cd 100644 --- a/arch/arm/mach-ux500/mbox-db5500.c +++ b/arch/arm/mach-ux500/mbox-db5500.c @@ -168,7 +168,7 @@ static ssize_t mbox_read_fifo(struct device *dev, return sprintf(buf, "0x%X\n", mbox_value); } -static DEVICE_ATTR(fifo, S_IWUGO | S_IRUGO, mbox_read_fifo, mbox_write_fifo); +static DEVICE_ATTR(fifo, S_IWUSR | S_IRUGO, mbox_read_fifo, mbox_write_fifo); static int mbox_show(struct seq_file *s, void *data) { From 3f5ec5e06d6ca88168277247dbac0ec7b501600f Mon Sep 17 00:00:00 2001 From: Anatolij Gustschin Date: Wed, 25 Apr 2012 16:01:51 -0700 Subject: [PATCH 194/365] drivers/rtc/rtc-ds1307.c: fix BUG shown with lock debugging enabled Add struct bin_attribute initialization to fix the following bug: rtc-ds1307 3-0068: rtc core: registered ds1307 as rtc0 BUG: key cfb14fcc not in .data! ------------[ cut here ]------------ WARNING: at kernel/lockdep.c:2986 sysfs_add_file_mode+0x84/0xdc() Modules linked in: [] (unwind_backtrace+0x0/0xf8) from [] (warn_slowpath_common+0x4c/0x64) [] (warn_slowpath_common+0x4c/0x64) from [] (warn_slowpath_null+0x1c/0x24) [] (warn_slowpath_null+0x1c/0x24) from [] (sysfs_add_file_mode+0x84/0xdc) [] (sysfs_add_file_mode+0x84/0xdc) from [] (ds1307_probe+0x5e4/0x6ac) [] (ds1307_probe+0x5e4/0x6ac) from [] (i2c_device_probe+0xdc/0x108) [] (i2c_device_probe+0xdc/0x108) from [] (driver_probe_device+0x90/0x210) [] (driver_probe_device+0x90/0x210) from [] (__driver_attach+0x94/0x98) [] (__driver_attach+0x94/0x98) from [] (bus_for_each_dev+0x50/0x7c) [] (bus_for_each_dev+0x50/0x7c) from [] (bus_add_driver+0x184/0x244) [] (bus_add_driver+0x184/0x244) from [] (driver_register+0x78/0x12c) [] (driver_register+0x78/0x12c) from [] (i2c_register_driver+0x2c/0xb4) [] (i2c_register_driver+0x2c/0xb4) from [] (do_one_initcall+0x34/0x178) [] (do_one_initcall+0x34/0x178) from [] (kernel_init+0xdc/0x194) [] (kernel_init+0xdc/0x194) from [] (kernel_thread_exit+0x0/0x8) Since commit 6992f5334995af4 ("sysfs: Use one lockdep class per sysfs attribute") this initialization is required. Reported-by: Stefano Babic Tested-by: Stefano Babic Signed-off-by: Anatolij Gustschin Cc: Alessandro Zummo Cc: Stefano Babic Cc: Eric W. Biederman Cc: Greg Kroah-Hartman Acked-by: Wolfram Sang Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/rtc/rtc-ds1307.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/rtc/rtc-ds1307.c b/drivers/rtc/rtc-ds1307.c index cd188ab72f79..c293d0cdb104 100644 --- a/drivers/rtc/rtc-ds1307.c +++ b/drivers/rtc/rtc-ds1307.c @@ -902,6 +902,7 @@ read_rtc: } ds1307->nvram->attr.name = "nvram"; ds1307->nvram->attr.mode = S_IRUGO | S_IWUSR; + sysfs_bin_attr_init(ds1307->nvram); ds1307->nvram->read = ds1307_nvram_read, ds1307->nvram->write = ds1307_nvram_write, ds1307->nvram->size = chip->nvram_size; From 63f61a6f4633ff34c17bea7a0ed827eaeb0733e1 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Wed, 25 Apr 2012 16:01:52 -0700 Subject: [PATCH 195/365] revert "proc: clear_refs: do not clear reserved pages" Revert commit 85e72aa5384 ("proc: clear_refs: do not clear reserved pages"), which was a quick fix suitable for -stable until ARM had been moved over to the gate_vma mechanism: https://lkml.org/lkml/2012/1/14/55 With commit f9d4861f ("ARM: 7294/1: vectors: use gate_vma for vectors user mapping"), ARM does now use the gate_vma, so the PageReserved check can be removed from the proc code. Signed-off-by: Will Deacon Cc: Nicolas Pitre Acked-by: Hugh Dickins Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- fs/proc/task_mmu.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c index 2b9a7607cbd5..2d60492d6df8 100644 --- a/fs/proc/task_mmu.c +++ b/fs/proc/task_mmu.c @@ -597,9 +597,6 @@ static int clear_refs_pte_range(pmd_t *pmd, unsigned long addr, if (!page) continue; - if (PageReserved(page)) - continue; - /* Clear accessed and referenced bits. */ ptep_test_and_clear_young(vma, addr, pte); ClearPageReferenced(page); From f2a9ef880763d7fbd657a3af646e132a90d70d34 Mon Sep 17 00:00:00 2001 From: Sasha Levin Date: Wed, 25 Apr 2012 16:01:52 -0700 Subject: [PATCH 196/365] mm: fix NULL ptr dereference in migrate_pages Commit 3268c63 ("mm: fix move/migrate_pages() race on task struct") has added an odd construct where 'mm' is checked for being NULL, and if it is, it would get dereferenced anyways by mput()ing it. This would lead to the following NULL ptr deref and BUG() when calling migrate_pages() with a pid that has no mm struct: [25904.193704] BUG: unable to handle kernel NULL pointer dereference at 0000000000000050 [25904.194235] IP: [] mmput+0x27/0xf0 [25904.194235] PGD 773e6067 PUD 77da0067 PMD 0 [25904.194235] Oops: 0002 [#1] PREEMPT SMP [25904.194235] CPU 2 [25904.194235] Pid: 31608, comm: trinity Tainted: G W 3.4.0-rc2-next-20120412-sasha #69 [25904.194235] RIP: 0010:[] [] mmput+0x27/0xf0 [25904.194235] RSP: 0018:ffff880077d49e08 EFLAGS: 00010202 [25904.194235] RAX: 0000000000000286 RBX: 0000000000000000 RCX: 0000000000000000 [25904.194235] RDX: ffff880075ef8000 RSI: 000000000000023d RDI: 0000000000000286 [25904.194235] RBP: ffff880077d49e18 R08: 0000000000000001 R09: 0000000000000001 [25904.194235] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 [25904.194235] R13: 00000000ffffffea R14: ffff880034287740 R15: ffff8800218d3010 [25904.194235] FS: 00007fc8b244c700(0000) GS:ffff880029800000(0000) knlGS:0000000000000000 [25904.194235] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [25904.194235] CR2: 0000000000000050 CR3: 00000000767c6000 CR4: 00000000000406e0 [25904.194235] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [25904.194235] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [25904.194235] Process trinity (pid: 31608, threadinfo ffff880077d48000, task ffff880075ef8000) [25904.194235] Stack: [25904.194235] ffff8800342876c0 0000000000000000 ffff880077d49f78 ffffffff811b8020 [25904.194235] ffffffff811b7d91 ffff880075ef8000 ffff88002256d200 0000000000000000 [25904.194235] 00000000000003ff 0000000000000000 0000000000000000 0000000000000000 [25904.194235] Call Trace: [25904.194235] [] sys_migrate_pages+0x340/0x3a0 [25904.194235] [] ? sys_migrate_pages+0xb1/0x3a0 [25904.194235] [] system_call_fastpath+0x16/0x1b [25904.194235] Code: c9 c3 66 90 55 31 d2 48 89 e5 be 3d 02 00 00 48 83 ec 10 48 89 1c 24 4c 89 64 24 08 48 89 fb 48 c7 c7 cf 0e e1 82 e8 69 18 03 00 ff 4b 50 0f 94 c0 84 c0 0f 84 aa 00 00 00 48 89 df e8 72 f1 [25904.194235] RIP [] mmput+0x27/0xf0 [25904.194235] RSP [25904.194235] CR2: 0000000000000050 [25904.348999] ---[ end trace a307b3ed40206b4b ]--- Signed-off-by: Sasha Levin Cc: Dave Hansen Cc: Mel Gorman Cc: Johannes Weiner Cc: KOSAKI Motohiro Cc: KAMEZAWA Hiroyuki Cc: Hugh Dickins Cc: Christoph Lameter Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/mempolicy.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/mm/mempolicy.c b/mm/mempolicy.c index cfb6c8678754..b19569137529 100644 --- a/mm/mempolicy.c +++ b/mm/mempolicy.c @@ -1361,11 +1361,14 @@ SYSCALL_DEFINE4(migrate_pages, pid_t, pid, unsigned long, maxnode, mm = get_task_mm(task); put_task_struct(task); - if (mm) - err = do_migrate_pages(mm, old, new, - capable(CAP_SYS_NICE) ? MPOL_MF_MOVE_ALL : MPOL_MF_MOVE); - else + + if (!mm) { err = -EINVAL; + goto out; + } + + err = do_migrate_pages(mm, old, new, + capable(CAP_SYS_NICE) ? MPOL_MF_MOVE_ALL : MPOL_MF_MOVE); mmput(mm); out: From 6e8b09eaf268bceac0c62e389b4bc0cb83dfb8e5 Mon Sep 17 00:00:00 2001 From: Sasha Levin Date: Wed, 25 Apr 2012 16:01:53 -0700 Subject: [PATCH 197/365] mm: fix NULL ptr dereference in move_pages Commit 3268c63 ("mm: fix move/migrate_pages() race on task struct") has added an odd construct where 'mm' is checked for being NULL, and if it is, it would get dereferenced anyways by mput()ing it. Signed-off-by: Sasha Levin Cc: Dave Hansen Cc: Mel Gorman Cc: Johannes Weiner Cc: KOSAKI Motohiro Cc: KAMEZAWA Hiroyuki Cc: Hugh Dickins Acked-by: Christoph Lameter Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- mm/migrate.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/mm/migrate.c b/mm/migrate.c index 51c08a0c6f68..11072383ae12 100644 --- a/mm/migrate.c +++ b/mm/migrate.c @@ -1388,14 +1388,14 @@ SYSCALL_DEFINE6(move_pages, pid_t, pid, unsigned long, nr_pages, mm = get_task_mm(task); put_task_struct(task); - if (mm) { - if (nodes) - err = do_pages_move(mm, task_nodes, nr_pages, pages, - nodes, status, flags); - else - err = do_pages_stat(mm, nr_pages, pages, status); - } else - err = -EINVAL; + if (!mm) + return -EINVAL; + + if (nodes) + err = do_pages_move(mm, task_nodes, nr_pages, pages, + nodes, status, flags); + else + err = do_pages_stat(mm, nr_pages, pages, status); mmput(mm); return err; From 8d08d71ce59438a6ef06be5db07966e0c144b74e Mon Sep 17 00:00:00 2001 From: Julian Anastasov Date: Wed, 25 Apr 2012 00:29:59 +0300 Subject: [PATCH 198/365] ipvs: add check in ftp for initialized core Avoid crash when registering ip_vs_ftp after the IPVS core initialization for netns fails. Do this by checking for present core (net->ipvs). Signed-off-by: Julian Anastasov Acked-by: Hans Schillstrom Signed-off-by: Simon Horman --- net/netfilter/ipvs/ip_vs_ftp.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/netfilter/ipvs/ip_vs_ftp.c b/net/netfilter/ipvs/ip_vs_ftp.c index 538d74ee4f68..e39f693dd3e4 100644 --- a/net/netfilter/ipvs/ip_vs_ftp.c +++ b/net/netfilter/ipvs/ip_vs_ftp.c @@ -439,6 +439,8 @@ static int __net_init __ip_vs_ftp_init(struct net *net) struct ip_vs_app *app; struct netns_ipvs *ipvs = net_ipvs(net); + if (!ipvs) + return -ENOENT; app = kmemdup(&ip_vs_ftp, sizeof(struct ip_vs_app), GFP_KERNEL); if (!app) return -ENOMEM; From 39f618b4fd95ae243d940ec64c961009c74e3333 Mon Sep 17 00:00:00 2001 From: Julian Anastasov Date: Wed, 25 Apr 2012 00:29:58 +0300 Subject: [PATCH 199/365] ipvs: reset ipvs pointer in netns Make sure net->ipvs is reset on netns cleanup or failed initialization. It is needed for IPVS applications to know that IPVS core is not loaded in netns. Signed-off-by: Julian Anastasov Acked-by: Hans Schillstrom Signed-off-by: Simon Horman --- net/netfilter/ipvs/ip_vs_core.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/netfilter/ipvs/ip_vs_core.c b/net/netfilter/ipvs/ip_vs_core.c index 2555816e7788..260b9ef88775 100644 --- a/net/netfilter/ipvs/ip_vs_core.c +++ b/net/netfilter/ipvs/ip_vs_core.c @@ -1924,6 +1924,7 @@ protocol_fail: control_fail: ip_vs_estimator_net_cleanup(net); estimator_fail: + net->ipvs = NULL; return -ENOMEM; } @@ -1936,6 +1937,7 @@ static void __net_exit __ip_vs_cleanup(struct net *net) ip_vs_control_net_cleanup(net); ip_vs_estimator_net_cleanup(net); IP_VS_DBG(2, "ipvs netns %d released\n", net_ipvs(net)->gen); + net->ipvs = NULL; } static void __net_exit __ip_vs_dev_cleanup(struct net *net) From 5d384574e8bceb9bada323da8044ca43e621886b Mon Sep 17 00:00:00 2001 From: Thadeu Lima de Souza Cascardo Date: Wed, 25 Apr 2012 07:32:11 +0000 Subject: [PATCH 200/365] ehea: fix allmulticast support There was a bug in the mask of regtype parameter for registering a multicast filter. It was ignoring the scope bit, which was wrongly being used for all filters. The SCOPE_ALL value adds a filter that allows all multicast packets and ignores the MAC parameter, just what allmulticast needs. The normals filters, however, should not use SCOPE_ALL. Signed-off-by: Thadeu Lima de Souza Cascardo Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/ehea/ehea_main.c | 24 ++++++++++++++--------- drivers/net/ethernet/ibm/ehea/ehea_phyp.h | 2 +- 2 files changed, 16 insertions(+), 10 deletions(-) diff --git a/drivers/net/ethernet/ibm/ehea/ehea_main.c b/drivers/net/ethernet/ibm/ehea/ehea_main.c index acf34b671547..9dcb5fd37371 100644 --- a/drivers/net/ethernet/ibm/ehea/ehea_main.c +++ b/drivers/net/ethernet/ibm/ehea/ehea_main.c @@ -290,16 +290,18 @@ static void ehea_update_bcmc_registrations(void) arr[i].adh = adapter->handle; arr[i].port_id = port->logical_port_id; - arr[i].reg_type = EHEA_BCMC_SCOPE_ALL | - EHEA_BCMC_MULTICAST | + arr[i].reg_type = EHEA_BCMC_MULTICAST | EHEA_BCMC_UNTAGGED; + if (mc_entry->macaddr == 0) + arr[i].reg_type |= EHEA_BCMC_SCOPE_ALL; arr[i++].macaddr = mc_entry->macaddr; arr[i].adh = adapter->handle; arr[i].port_id = port->logical_port_id; - arr[i].reg_type = EHEA_BCMC_SCOPE_ALL | - EHEA_BCMC_MULTICAST | + arr[i].reg_type = EHEA_BCMC_MULTICAST | EHEA_BCMC_VLANID_ALL; + if (mc_entry->macaddr == 0) + arr[i].reg_type |= EHEA_BCMC_SCOPE_ALL; arr[i++].macaddr = mc_entry->macaddr; num_registrations -= 2; } @@ -1838,8 +1840,9 @@ static u64 ehea_multicast_reg_helper(struct ehea_port *port, u64 mc_mac_addr, u64 hret; u8 reg_type; - reg_type = EHEA_BCMC_SCOPE_ALL | EHEA_BCMC_MULTICAST - | EHEA_BCMC_UNTAGGED; + reg_type = EHEA_BCMC_MULTICAST | EHEA_BCMC_UNTAGGED; + if (mc_mac_addr == 0) + reg_type |= EHEA_BCMC_SCOPE_ALL; hret = ehea_h_reg_dereg_bcmc(port->adapter->handle, port->logical_port_id, @@ -1847,8 +1850,9 @@ static u64 ehea_multicast_reg_helper(struct ehea_port *port, u64 mc_mac_addr, if (hret) goto out; - reg_type = EHEA_BCMC_SCOPE_ALL | EHEA_BCMC_MULTICAST - | EHEA_BCMC_VLANID_ALL; + reg_type = EHEA_BCMC_MULTICAST | EHEA_BCMC_VLANID_ALL; + if (mc_mac_addr == 0) + reg_type |= EHEA_BCMC_SCOPE_ALL; hret = ehea_h_reg_dereg_bcmc(port->adapter->handle, port->logical_port_id, @@ -1898,7 +1902,7 @@ static void ehea_allmulti(struct net_device *dev, int enable) netdev_err(dev, "failed enabling IFF_ALLMULTI\n"); } - } else + } else { if (!enable) { /* Disable ALLMULTI */ hret = ehea_multicast_reg_helper(port, 0, H_DEREG_BCMC); @@ -1908,6 +1912,7 @@ static void ehea_allmulti(struct net_device *dev, int enable) netdev_err(dev, "failed disabling IFF_ALLMULTI\n"); } + } } static void ehea_add_multicast_entry(struct ehea_port *port, u8 *mc_mac_addr) @@ -2463,6 +2468,7 @@ static int ehea_down(struct net_device *dev) return 0; ehea_drop_multicast_list(dev); + ehea_allmulti(dev, 0); ehea_broadcast_reg_helper(port, H_DEREG_BCMC); ehea_free_interrupts(dev); diff --git a/drivers/net/ethernet/ibm/ehea/ehea_phyp.h b/drivers/net/ethernet/ibm/ehea/ehea_phyp.h index 52c456ec4d6c..8364815c32ff 100644 --- a/drivers/net/ethernet/ibm/ehea/ehea_phyp.h +++ b/drivers/net/ethernet/ibm/ehea/ehea_phyp.h @@ -450,7 +450,7 @@ u64 ehea_h_modify_ehea_port(const u64 adapter_handle, const u16 port_num, void *cb_addr); #define H_REGBCMC_PN EHEA_BMASK_IBM(48, 63) -#define H_REGBCMC_REGTYPE EHEA_BMASK_IBM(61, 63) +#define H_REGBCMC_REGTYPE EHEA_BMASK_IBM(60, 63) #define H_REGBCMC_MACADDR EHEA_BMASK_IBM(16, 63) #define H_REGBCMC_VLANID EHEA_BMASK_IBM(52, 63) From 47d59d01322f60d1c46fdf2650e0613daa8ce637 Mon Sep 17 00:00:00 2001 From: Thadeu Lima de Souza Cascardo Date: Wed, 25 Apr 2012 07:32:12 +0000 Subject: [PATCH 201/365] ehea: fix promiscuous mode commit a4910b744486254cfa61995954c118fb2283c4fd has broken promiscuous mode, which is never set. port->promisc just reflects the last setting of PROMISCUOUS mode to avoid doing an extra hypercall when it's already set. However, since it may fail because of hypervisor permissions, we should still respect the multicast settings and not simply exit after setting promiscuous mode. Signed-off-by: Thadeu Lima de Souza Cascardo Cc: Breno Leitao Signed-off-by: David S. Miller --- drivers/net/ethernet/ibm/ehea/ehea_main.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/drivers/net/ethernet/ibm/ehea/ehea_main.c b/drivers/net/ethernet/ibm/ehea/ehea_main.c index 9dcb5fd37371..c9069a28832b 100644 --- a/drivers/net/ethernet/ibm/ehea/ehea_main.c +++ b/drivers/net/ethernet/ibm/ehea/ehea_main.c @@ -1946,11 +1946,7 @@ static void ehea_set_multicast_list(struct net_device *dev) struct netdev_hw_addr *ha; int ret; - if (port->promisc) { - ehea_promiscuous(dev, 1); - return; - } - ehea_promiscuous(dev, 0); + ehea_promiscuous(dev, !!(dev->flags & IFF_PROMISC)); if (dev->flags & IFF_ALLMULTI) { ehea_allmulti(dev, 1); From 0848e4043014631d792a66266d6d7d64a7f21da5 Mon Sep 17 00:00:00 2001 From: "alex.bluesman.smirnov@gmail.com" Date: Wed, 25 Apr 2012 23:24:56 +0000 Subject: [PATCH 202/365] 6lowpan: fix segmentation fault caused by mlme request Add nescesary mlme callbacks to satisfy "iz list" request from user space. Due to 6lowpan device doesn't have its own phy, mlme implemented as a pipe to a real phy to which 6lowpan is attached. Signed-off-by: Alexander Smirnov Signed-off-by: David S. Miller --- net/ieee802154/6lowpan.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/net/ieee802154/6lowpan.c b/net/ieee802154/6lowpan.c index 368515885368..f6b169439b5b 100644 --- a/net/ieee802154/6lowpan.c +++ b/net/ieee802154/6lowpan.c @@ -1044,6 +1044,24 @@ static void lowpan_dev_free(struct net_device *dev) free_netdev(dev); } +static struct wpan_phy *lowpan_get_phy(const struct net_device *dev) +{ + struct net_device *real_dev = lowpan_dev_info(dev)->real_dev; + return ieee802154_mlme_ops(real_dev)->get_phy(real_dev); +} + +static u16 lowpan_get_pan_id(const struct net_device *dev) +{ + struct net_device *real_dev = lowpan_dev_info(dev)->real_dev; + return ieee802154_mlme_ops(real_dev)->get_pan_id(real_dev); +} + +static u16 lowpan_get_short_addr(const struct net_device *dev) +{ + struct net_device *real_dev = lowpan_dev_info(dev)->real_dev; + return ieee802154_mlme_ops(real_dev)->get_short_addr(real_dev); +} + static struct header_ops lowpan_header_ops = { .create = lowpan_header_create, }; @@ -1053,6 +1071,12 @@ static const struct net_device_ops lowpan_netdev_ops = { .ndo_set_mac_address = eth_mac_addr, }; +static struct ieee802154_mlme_ops lowpan_mlme = { + .get_pan_id = lowpan_get_pan_id, + .get_phy = lowpan_get_phy, + .get_short_addr = lowpan_get_short_addr, +}; + static void lowpan_setup(struct net_device *dev) { pr_debug("(%s)\n", __func__); @@ -1070,6 +1094,7 @@ static void lowpan_setup(struct net_device *dev) dev->netdev_ops = &lowpan_netdev_ops; dev->header_ops = &lowpan_header_ops; + dev->ml_priv = &lowpan_mlme; dev->destructor = lowpan_dev_free; } From 8deff4af8745561efd2be34ee30cc57a6f0107c6 Mon Sep 17 00:00:00 2001 From: "alex.bluesman.smirnov@gmail.com" Date: Wed, 25 Apr 2012 23:24:57 +0000 Subject: [PATCH 203/365] 6lowpan: clean up fragments list if module unloaded Clean all the pending fragments and relative timers if 6lowpan link is going to be deleted. Signed-off-by: Alexander Smirnov Signed-off-by: David S. Miller --- net/ieee802154/6lowpan.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/net/ieee802154/6lowpan.c b/net/ieee802154/6lowpan.c index f6b169439b5b..b3021f765204 100644 --- a/net/ieee802154/6lowpan.c +++ b/net/ieee802154/6lowpan.c @@ -1177,11 +1177,20 @@ static void lowpan_dellink(struct net_device *dev, struct list_head *head) { struct lowpan_dev_info *lowpan_dev = lowpan_dev_info(dev); struct net_device *real_dev = lowpan_dev->real_dev; - struct lowpan_dev_record *entry; - struct lowpan_dev_record *tmp; + struct lowpan_dev_record *entry, *tmp; + struct lowpan_fragment *frame, *tframe; ASSERT_RTNL(); + spin_lock(&flist_lock); + list_for_each_entry_safe(frame, tframe, &lowpan_fragments, list) { + del_timer(&frame->timer); + list_del(&frame->list); + dev_kfree_skb(frame->skb); + kfree(frame); + } + spin_unlock(&flist_lock); + mutex_lock(&lowpan_dev_info(dev)->dev_list_mtx); list_for_each_entry_safe(entry, tmp, &lowpan_devices, list) { if (entry->ldev == dev) { From 768f7c7c121e80f458a9d013b2e8b169e5dfb1e5 Mon Sep 17 00:00:00 2001 From: "alex.bluesman.smirnov@gmail.com" Date: Wed, 25 Apr 2012 23:24:58 +0000 Subject: [PATCH 204/365] 6lowpan: add missing spin_lock_init() Add missing spin_lock_init() for frames list lock. Signed-off-by: Alexander Smirnov Signed-off-by: David S. Miller --- net/ieee802154/6lowpan.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/ieee802154/6lowpan.c b/net/ieee802154/6lowpan.c index b3021f765204..840821b90bcd 100644 --- a/net/ieee802154/6lowpan.c +++ b/net/ieee802154/6lowpan.c @@ -1168,6 +1168,8 @@ static int lowpan_newlink(struct net *src_net, struct net_device *dev, list_add_tail(&entry->list, &lowpan_devices); mutex_unlock(&lowpan_dev_info(dev)->dev_list_mtx); + spin_lock_init(&flist_lock); + register_netdevice(dev); return 0; From 1bb57e940e1958e40d51f2078f50c3a96a9b2d75 Mon Sep 17 00:00:00 2001 From: Jeff Mahoney Date: Wed, 25 Apr 2012 14:32:09 +0000 Subject: [PATCH 205/365] dl2k: Clean up rio_ioctl The dl2k driver's rio_ioctl call has a few issues: - No permissions checking - Implements SIOCGMIIREG and SIOCGMIIREG using the SIOCDEVPRIVATE numbers - Has a few ioctls that may have been used for debugging at one point but have no place in the kernel proper. This patch removes all but the MII ioctls, renumbers them to use the standard ones, and adds the proper permission check for SIOCSMIIREG. We can also get rid of the dl2k-specific struct mii_data in favor of the generic struct mii_ioctl_data. Since we have the phyid on hand, we can add the SIOCGMIIPHY ioctl too. Most of the MII code for the driver could probably be converted to use the generic MII library but I don't have a device to test the results. Reported-by: Stephan Mueller Signed-off-by: Jeff Mahoney Signed-off-by: David S. Miller --- drivers/net/ethernet/dlink/dl2k.c | 52 ++++++------------------------- drivers/net/ethernet/dlink/dl2k.h | 7 ----- 2 files changed, 9 insertions(+), 50 deletions(-) diff --git a/drivers/net/ethernet/dlink/dl2k.c b/drivers/net/ethernet/dlink/dl2k.c index b2dc2c81a147..2e09edb9cdf8 100644 --- a/drivers/net/ethernet/dlink/dl2k.c +++ b/drivers/net/ethernet/dlink/dl2k.c @@ -1259,55 +1259,21 @@ rio_ioctl (struct net_device *dev, struct ifreq *rq, int cmd) { int phy_addr; struct netdev_private *np = netdev_priv(dev); - struct mii_data *miidata = (struct mii_data *) &rq->ifr_ifru; - - struct netdev_desc *desc; - int i; + struct mii_ioctl_data *miidata = if_mii(rq); phy_addr = np->phy_addr; switch (cmd) { - case SIOCDEVPRIVATE: + case SIOCGMIIPHY: + miidata->phy_id = phy_addr; break; - - case SIOCDEVPRIVATE + 1: - miidata->out_value = mii_read (dev, phy_addr, miidata->reg_num); + case SIOCGMIIREG: + miidata->val_out = mii_read (dev, phy_addr, miidata->reg_num); break; - case SIOCDEVPRIVATE + 2: - mii_write (dev, phy_addr, miidata->reg_num, miidata->in_value); + case SIOCSMIIREG: + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + mii_write (dev, phy_addr, miidata->reg_num, miidata->val_in); break; - case SIOCDEVPRIVATE + 3: - break; - case SIOCDEVPRIVATE + 4: - break; - case SIOCDEVPRIVATE + 5: - netif_stop_queue (dev); - break; - case SIOCDEVPRIVATE + 6: - netif_wake_queue (dev); - break; - case SIOCDEVPRIVATE + 7: - printk - ("tx_full=%x cur_tx=%lx old_tx=%lx cur_rx=%lx old_rx=%lx\n", - netif_queue_stopped(dev), np->cur_tx, np->old_tx, np->cur_rx, - np->old_rx); - break; - case SIOCDEVPRIVATE + 8: - printk("TX ring:\n"); - for (i = 0; i < TX_RING_SIZE; i++) { - desc = &np->tx_ring[i]; - printk - ("%02x:cur:%08x next:%08x status:%08x frag1:%08x frag0:%08x", - i, - (u32) (np->tx_ring_dma + i * sizeof (*desc)), - (u32)le64_to_cpu(desc->next_desc), - (u32)le64_to_cpu(desc->status), - (u32)(le64_to_cpu(desc->fraginfo) >> 32), - (u32)le64_to_cpu(desc->fraginfo)); - printk ("\n"); - } - printk ("\n"); - break; - default: return -EOPNOTSUPP; } diff --git a/drivers/net/ethernet/dlink/dl2k.h b/drivers/net/ethernet/dlink/dl2k.h index ba0adcafa55a..30c2da3de548 100644 --- a/drivers/net/ethernet/dlink/dl2k.h +++ b/drivers/net/ethernet/dlink/dl2k.h @@ -365,13 +365,6 @@ struct ioctl_data { char *data; }; -struct mii_data { - __u16 reserved; - __u16 reg_num; - __u16 in_value; - __u16 out_value; -}; - /* The Rx and Tx buffer descriptors. */ struct netdev_desc { __le64 next_desc; From 07d69d4238418746a7b85c5d05ec17c658a2a390 Mon Sep 17 00:00:00 2001 From: Paolo Pisati Date: Mon, 23 Apr 2012 04:05:20 +0000 Subject: [PATCH 206/365] smsc95xx: mark link down on startup and let PHY interrupt deal with carrier changes Without this patch sysfs reports the cable as present flag@flag-desktop:~$ cat /sys/class/net/eth0/carrier 1 while it's not: flag@flag-desktop:~$ sudo mii-tool eth0 eth0: no link Tested on my Beagle XM. v2: added mantainer to the list of recipient Signed-off-by: Paolo Pisati Acked-by: Steve Glendinning Signed-off-by: David S. Miller --- drivers/net/usb/smsc95xx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c index 53a1ba5e0c2c..94ae66999f59 100644 --- a/drivers/net/usb/smsc95xx.c +++ b/drivers/net/usb/smsc95xx.c @@ -1192,7 +1192,7 @@ static const struct driver_info smsc95xx_info = { .rx_fixup = smsc95xx_rx_fixup, .tx_fixup = smsc95xx_tx_fixup, .status = smsc95xx_status, - .flags = FLAG_ETHER | FLAG_SEND_ZLP, + .flags = FLAG_ETHER | FLAG_SEND_ZLP | FLAG_LINK_INTR, }; static const struct usb_device_id products[] = { From eb95308ee2a69403909e111837b9068c64cfc349 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Tue, 17 Apr 2012 13:38:40 +0200 Subject: [PATCH 207/365] sched: Fix more load-balancing fallout Commits 367456c756a6 ("sched: Ditch per cgroup task lists for load-balancing") and 5d6523ebd ("sched: Fix load-balance wreckage") left some more wreckage. By setting loop_max unconditionally to ->nr_running load-balancing could take a lot of time on very long runqueues (hackbench!). So keep the sysctl as max limit of the amount of tasks we'll iterate. Furthermore, the min load filter for migration completely fails with cgroups since inequality in per-cpu state can easily lead to such small loads :/ Furthermore the change to add new tasks to the tail of the queue instead of the head seems to have some effect.. not quite sure I understand why. Combined these fixes solve the huge hackbench regression reported by Tim when hackbench is ran in a cgroup. Reported-by: Tim Chen Acked-by: Tim Chen Signed-off-by: Peter Zijlstra Cc: Linus Torvalds Cc: Andrew Morton Link: http://lkml.kernel.org/r/1335365763.28150.267.camel@twins [ got rid of the CONFIG_PREEMPT tuning and made small readability edits ] Signed-off-by: Ingo Molnar --- kernel/sched/fair.c | 18 ++++++++++-------- kernel/sched/features.h | 1 + 2 files changed, 11 insertions(+), 8 deletions(-) diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c index 0d97ebdc58f0..e9553640c1c3 100644 --- a/kernel/sched/fair.c +++ b/kernel/sched/fair.c @@ -784,7 +784,7 @@ account_entity_enqueue(struct cfs_rq *cfs_rq, struct sched_entity *se) update_load_add(&rq_of(cfs_rq)->load, se->load.weight); #ifdef CONFIG_SMP if (entity_is_task(se)) - list_add_tail(&se->group_node, &rq_of(cfs_rq)->cfs_tasks); + list_add(&se->group_node, &rq_of(cfs_rq)->cfs_tasks); #endif cfs_rq->nr_running++; } @@ -3215,6 +3215,8 @@ static int move_one_task(struct lb_env *env) static unsigned long task_h_load(struct task_struct *p); +static const unsigned int sched_nr_migrate_break = 32; + /* * move_tasks tries to move up to load_move weighted load from busiest to * this_rq, as part of a balancing operation within domain "sd". @@ -3242,7 +3244,7 @@ static int move_tasks(struct lb_env *env) /* take a breather every nr_migrate tasks */ if (env->loop > env->loop_break) { - env->loop_break += sysctl_sched_nr_migrate; + env->loop_break += sched_nr_migrate_break; env->flags |= LBF_NEED_BREAK; break; } @@ -3252,7 +3254,7 @@ static int move_tasks(struct lb_env *env) load = task_h_load(p); - if (load < 16 && !env->sd->nr_balance_failed) + if (sched_feat(LB_MIN) && load < 16 && !env->sd->nr_balance_failed) goto next; if ((load / 2) > env->load_move) @@ -4407,7 +4409,7 @@ static int load_balance(int this_cpu, struct rq *this_rq, .dst_cpu = this_cpu, .dst_rq = this_rq, .idle = idle, - .loop_break = sysctl_sched_nr_migrate, + .loop_break = sched_nr_migrate_break, }; cpumask_copy(cpus, cpu_active_mask); @@ -4445,10 +4447,10 @@ redo: * correctly treated as an imbalance. */ env.flags |= LBF_ALL_PINNED; - env.load_move = imbalance; - env.src_cpu = busiest->cpu; - env.src_rq = busiest; - env.loop_max = busiest->nr_running; + env.load_move = imbalance; + env.src_cpu = busiest->cpu; + env.src_rq = busiest; + env.loop_max = min_t(unsigned long, sysctl_sched_nr_migrate, busiest->nr_running); more_balance: local_irq_save(flags); diff --git a/kernel/sched/features.h b/kernel/sched/features.h index e61fd73913d0..de00a486c5c6 100644 --- a/kernel/sched/features.h +++ b/kernel/sched/features.h @@ -68,3 +68,4 @@ SCHED_FEAT(TTWU_QUEUE, true) SCHED_FEAT(FORCE_SD_OVERLAP, false) SCHED_FEAT(RT_RUNTIME_SHARE, true) +SCHED_FEAT(LB_MIN, false) From fb2cf2c660971bea0ad86a9a5c19ad39eab61344 Mon Sep 17 00:00:00 2001 From: "he, bo" Date: Wed, 25 Apr 2012 19:59:21 +0800 Subject: [PATCH 208/365] sched: Fix OOPS when build_sched_domains() percpu allocation fails Under extreme memory used up situations, percpu allocation might fail. We hit it when system goes to suspend-to-ram, causing a kworker panic: EIP: [] build_sched_domains+0x23a/0xad0 Kernel panic - not syncing: Fatal exception Pid: 3026, comm: kworker/u:3 3.0.8-137473-gf42fbef #1 Call Trace: [] panic+0x66/0x16c [...] [] partition_sched_domains+0x287/0x4b0 [] cpuset_update_active_cpus+0x1fe/0x210 [] cpuset_cpu_inactive+0x1d/0x30 [...] With this fix applied build_sched_domains() will return -ENOMEM and the suspend attempt fails. Signed-off-by: he, bo Reviewed-by: Zhang, Yanmin Reviewed-by: Srivatsa S. Bhat Signed-off-by: Peter Zijlstra Cc: Linus Torvalds Cc: Andrew Morton Cc: Link: http://lkml.kernel.org/r/1335355161.5892.17.camel@hebo [ So, we fail to deallocate a CPU because we cannot allocate RAM :-/ I don't like that kind of sad behavior but nevertheless it should not crash under high memory load. ] Signed-off-by: Ingo Molnar --- kernel/sched/core.c | 22 ++++++++++++++++------ 1 file changed, 16 insertions(+), 6 deletions(-) diff --git a/kernel/sched/core.c b/kernel/sched/core.c index 4603b9d8f30a..0533a688ce22 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -6405,16 +6405,26 @@ static void __sdt_free(const struct cpumask *cpu_map) struct sd_data *sdd = &tl->data; for_each_cpu(j, cpu_map) { - struct sched_domain *sd = *per_cpu_ptr(sdd->sd, j); - if (sd && (sd->flags & SD_OVERLAP)) - free_sched_groups(sd->groups, 0); - kfree(*per_cpu_ptr(sdd->sd, j)); - kfree(*per_cpu_ptr(sdd->sg, j)); - kfree(*per_cpu_ptr(sdd->sgp, j)); + struct sched_domain *sd; + + if (sdd->sd) { + sd = *per_cpu_ptr(sdd->sd, j); + if (sd && (sd->flags & SD_OVERLAP)) + free_sched_groups(sd->groups, 0); + kfree(*per_cpu_ptr(sdd->sd, j)); + } + + if (sdd->sg) + kfree(*per_cpu_ptr(sdd->sg, j)); + if (sdd->sgp) + kfree(*per_cpu_ptr(sdd->sgp, j)); } free_percpu(sdd->sd); + sdd->sd = NULL; free_percpu(sdd->sg); + sdd->sg = NULL; free_percpu(sdd->sgp); + sdd->sgp = NULL; } } From 724b6daa13e100067c30cfc4d1ad06629609dc4e Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Wed, 11 Apr 2012 11:54:13 +1000 Subject: [PATCH 209/365] perf: Fix perf_event_for_each() to use sibling In perf_event_for_each() we call a function on an event, and then iterate over the siblings of the event. However we don't call the function on the siblings, we call it repeatedly on the original event - it seems "obvious" that we should be calling it with sibling as the argument. It looks like this broke in commit 75f937f24bd9 ("Fix ctx->mutex vs counter->mutex inversion"). The only effect of the bug is that the PERF_IOC_FLAG_GROUP parameter to the ioctls doesn't work. Signed-off-by: Michael Ellerman Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/1334109253-31329-1-git-send-email-michael@ellerman.id.au Signed-off-by: Ingo Molnar --- kernel/events/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/events/core.c b/kernel/events/core.c index a6a9ec4cd8f5..fd126f82b57c 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -3183,7 +3183,7 @@ static void perf_event_for_each(struct perf_event *event, perf_event_for_each_child(event, func); func(event); list_for_each_entry(sibling, &event->sibling_list, group_entry) - perf_event_for_each_child(event, func); + perf_event_for_each_child(sibling, func); mutex_unlock(&ctx->mutex); } From d08c9a33b4aa6665b0ee3c4d1b57715fa0eae2a2 Mon Sep 17 00:00:00 2001 From: "Mingarelli, Thomas" Date: Tue, 3 Apr 2012 05:37:01 +0000 Subject: [PATCH 210/365] hpwdt: Only BYTE reads/writes to WD Timer port 0x72 This patch is to correct the use of the iLO port 0x72 usage. The port 0x72 is a byte size write/read and hpwdt is currently writing a WORD. Signed-off by: Thomas Mingarelli Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/hpwdt.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c index cbc7ceef2786..9f13b897fd64 100644 --- a/drivers/watchdog/hpwdt.c +++ b/drivers/watchdog/hpwdt.c @@ -435,16 +435,16 @@ static void hpwdt_start(void) { reload = SECS_TO_TICKS(soft_margin); iowrite16(reload, hpwdt_timer_reg); - iowrite16(0x85, hpwdt_timer_con); + iowrite8(0x85, hpwdt_timer_con); } static void hpwdt_stop(void) { unsigned long data; - data = ioread16(hpwdt_timer_con); + data = ioread8(hpwdt_timer_con); data &= 0xFE; - iowrite16(data, hpwdt_timer_con); + iowrite8(data, hpwdt_timer_con); } static void hpwdt_ping(void) From c3e40a9972428d6e2d8e287ed0233a57a218c30f Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Wed, 25 Apr 2012 13:44:20 -0700 Subject: [PATCH 211/365] hwmon: (fam15h_power) Fix pci_device_id array pci_match_id() takes an *array* of IDs which must be properly zero- terminated. Reported-by: Ben Hutchings Cc: stable@vger.kernel.org # 3.0+: 00250ec hwmon: fam15h_power: fix bogus values Cc: stable@vger.kernel.org # 3.0+ Signed-off-by: Guenter Roeck Acked-by: Jean Delvare --- drivers/hwmon/fam15h_power.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/hwmon/fam15h_power.c b/drivers/hwmon/fam15h_power.c index 37a8fc92b44a..e8e18cab1fb8 100644 --- a/drivers/hwmon/fam15h_power.c +++ b/drivers/hwmon/fam15h_power.c @@ -128,17 +128,20 @@ static bool __devinit fam15h_power_is_internal_node0(struct pci_dev *f4) * counter saturations resulting in bogus power readings. * We correct this value ourselves to cope with older BIOSes. */ +static DEFINE_PCI_DEVICE_TABLE(affected_device) = { + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_NB_F4) }, + { 0 } +}; + static void __devinit tweak_runavg_range(struct pci_dev *pdev) { u32 val; - const struct pci_device_id affected_device = { - PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_NB_F4) }; /* * let this quirk apply only to the current version of the * northbridge, since future versions may change the behavior */ - if (!pci_match_id(&affected_device, pdev)) + if (!pci_match_id(affected_device, pdev)) return; pci_bus_read_config_dword(pdev->bus, From 1aba1567637b93eee32253b42deaaad381c3175b Mon Sep 17 00:00:00 2001 From: Weston Andros Adamson Date: Tue, 24 Apr 2012 16:50:37 -0400 Subject: [PATCH 212/365] nfs4: fix referrals on mounts that use IPv6 addrs All referrals (IPv4 addr, IPv6 addr, and DNS) are broken on mounts of IPv6 addresses, because validation code uses a path that is parsed from the dev_name (":") by splitting on the first colon and colons are used in IPv6 addrs. This patch ignores colons within IPv6 addresses that are escaped by '[' and ']'. Signed-off-by: Weston Andros Adamson Signed-off-by: Trond Myklebust --- fs/nfs/nfs4namespace.c | 30 +++++++++++++++++++++++++++--- 1 file changed, 27 insertions(+), 3 deletions(-) diff --git a/fs/nfs/nfs4namespace.c b/fs/nfs/nfs4namespace.c index 9c8eca315f43..7483a177dc97 100644 --- a/fs/nfs/nfs4namespace.c +++ b/fs/nfs/nfs4namespace.c @@ -51,6 +51,30 @@ Elong: return ERR_PTR(-ENAMETOOLONG); } +/* + * return the path component of ":" + * nfspath - the ":" string + * end - one past the last char that could contain ":" + * returns NULL on failure + */ +static char *nfs_path_component(const char *nfspath, const char *end) +{ + char *p; + + if (*nfspath == '[') { + /* parse [] escaped IPv6 addrs */ + p = strchr(nfspath, ']'); + if (p != NULL && ++p < end && *p == ':') + return p + 1; + } else { + /* otherwise split on first colon */ + p = strchr(nfspath, ':'); + if (p != NULL && p < end) + return p + 1; + } + return NULL; +} + /* * Determine the mount path as a string */ @@ -59,9 +83,9 @@ static char *nfs4_path(struct dentry *dentry, char *buffer, ssize_t buflen) char *limit; char *path = nfs_path(&limit, dentry, buffer, buflen); if (!IS_ERR(path)) { - char *colon = strchr(path, ':'); - if (colon && colon < limit) - path = colon + 1; + char *path_component = nfs_path_component(path, limit); + if (path_component) + return path_component; } return path; } From 9526b2b6d6b9f183b66cf21c4afa6e79d5a14f44 Mon Sep 17 00:00:00 2001 From: Sachin Bhamare Date: Fri, 30 Mar 2012 14:29:59 -0700 Subject: [PATCH 213/365] pnfs-obj: Remove unused variable from objlayout_get_deviceinfo() Local variable 'sb' was not being used in objlayout_get_deviceinfo(). Signed-off-by: Sachin Bhamare Signed-off-by: Boaz Harrosh Signed-off-by: Trond Myklebust --- fs/nfs/objlayout/objlayout.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/fs/nfs/objlayout/objlayout.c b/fs/nfs/objlayout/objlayout.c index 8d45f1c318ce..595c5fc21a19 100644 --- a/fs/nfs/objlayout/objlayout.c +++ b/fs/nfs/objlayout/objlayout.c @@ -604,7 +604,6 @@ int objlayout_get_deviceinfo(struct pnfs_layout_hdr *pnfslay, { struct objlayout_deviceinfo *odi; struct pnfs_device pd; - struct super_block *sb; struct page *page, **pages; u32 *p; int err; @@ -623,7 +622,6 @@ int objlayout_get_deviceinfo(struct pnfs_layout_hdr *pnfslay, pd.pglen = PAGE_SIZE; pd.mincount = 0; - sb = pnfslay->plh_inode->i_sb; err = nfs4_proc_getdeviceinfo(NFS_SERVER(pnfslay->plh_inode), &pd); dprintk("%s nfs_getdeviceinfo returned %d\n", __func__, err); if (err) From e5265a0c587423bbd21a6b39a572cecff16b9346 Mon Sep 17 00:00:00 2001 From: Andy Adamson Date: Sat, 14 Apr 2012 03:56:35 -0400 Subject: [PATCH 214/365] NFSv4.1 fix page number calculation bug for filelayout decode buffers Signed-off-by: Andy Adamson Signed-off-by: Trond Myklebust --- fs/nfs/nfs4filelayoutdev.c | 2 +- fs/nfs/pnfs.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/nfs/nfs4filelayoutdev.c b/fs/nfs/nfs4filelayoutdev.c index a866bbd2890a..c9cff9adb2d3 100644 --- a/fs/nfs/nfs4filelayoutdev.c +++ b/fs/nfs/nfs4filelayoutdev.c @@ -699,7 +699,7 @@ get_device_info(struct inode *inode, struct nfs4_deviceid *dev_id, gfp_t gfp_fla * GETDEVICEINFO's maxcount */ max_resp_sz = server->nfs_client->cl_session->fc_attrs.max_resp_sz; - max_pages = max_resp_sz >> PAGE_SHIFT; + max_pages = nfs_page_array_len(0, max_resp_sz); dprintk("%s inode %p max_resp_sz %u max_pages %d\n", __func__, inode, max_resp_sz, max_pages); diff --git a/fs/nfs/pnfs.c b/fs/nfs/pnfs.c index b5d451586943..38512bcd2e98 100644 --- a/fs/nfs/pnfs.c +++ b/fs/nfs/pnfs.c @@ -587,7 +587,7 @@ send_layoutget(struct pnfs_layout_hdr *lo, /* allocate pages for xdr post processing */ max_resp_sz = server->nfs_client->cl_session->fc_attrs.max_resp_sz; - max_pages = max_resp_sz >> PAGE_SHIFT; + max_pages = nfs_page_array_len(0, max_resp_sz); pages = kcalloc(max_pages, sizeof(struct page *), gfp_flags); if (!pages) From 10bd295a0b6488ebe634b72a11d8986bd3af3819 Mon Sep 17 00:00:00 2001 From: Jim Rees Date: Mon, 9 Apr 2012 22:33:39 -0400 Subject: [PATCH 215/365] fix page number calculation bug for block layout decode buffer Signed-off-by: Jim Rees Suggested-by: Andy Adamson Suggested-by: Fred Isaman Signed-off-by: Trond Myklebust --- fs/nfs/blocklayout/blocklayout.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/nfs/blocklayout/blocklayout.c b/fs/nfs/blocklayout/blocklayout.c index 9c94297bb70e..7f6a23f0244e 100644 --- a/fs/nfs/blocklayout/blocklayout.c +++ b/fs/nfs/blocklayout/blocklayout.c @@ -38,6 +38,8 @@ #include /* various write calls */ #include +#include "../pnfs.h" +#include "../internal.h" #include "blocklayout.h" #define NFSDBG_FACILITY NFSDBG_PNFS_LD @@ -868,7 +870,7 @@ nfs4_blk_get_deviceinfo(struct nfs_server *server, const struct nfs_fh *fh, * GETDEVICEINFO's maxcount */ max_resp_sz = server->nfs_client->cl_session->fc_attrs.max_resp_sz; - max_pages = max_resp_sz >> PAGE_SHIFT; + max_pages = nfs_page_array_len(0, max_resp_sz); dprintk("%s max_resp_sz %u max_pages %d\n", __func__, max_resp_sz, max_pages); From 6651819b4b4fc3caa6964c5d825eb4bb996f3905 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Sun, 1 Apr 2012 19:16:18 +0200 Subject: [PATCH 216/365] drm/i915: handle input/output sdvo timings separately in mode_set We seem to have a decent confusion between the output timings and the input timings of the sdvo encoder. If I understand the code correctly, we use the original mode unchanged for the output timings, safe for the lvds case. And we should use the adjusted mode for input timings. Clarify the situation by adding an explicit output_dtd to the sdvo mode_set function and streamline the code-flow by moving the input and output mode setting in the sdvo encode together. Furthermore testing showed that the sdvo input timing needs the unadjusted dotclock, the sdvo chip will automatically compute the required pixel multiplier to get a dotclock above 100 MHz. Fix this up when converting a drm mode to an sdvo dtd. This regression was introduced in commit c74696b9c890074c1e1ee3d7496fc71eb3680ced Author: Pavel Roskin Date: Thu Sep 2 14:46:34 2010 -0400 i915: revert some checks added by commit 32aad86f particularly the following hunk: diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index 093e914..62d22ae 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -1122,11 +1123,9 @@ static void intel_sdvo_mode_set(struct drm_encoder *encoder, /* We have tried to get input timing in mode_fixup, and filled into adjusted_mode */ - if (intel_sdvo->is_tv || intel_sdvo->is_lvds) { - intel_sdvo_get_dtd_from_mode(&input_dtd, adjusted_mode); + intel_sdvo_get_dtd_from_mode(&input_dtd, adjusted_mode); + if (intel_sdvo->is_tv || intel_sdvo->is_lvds) input_dtd.part2.sdvo_flags = intel_sdvo->sdvo_flags; - } else - intel_sdvo_get_dtd_from_mode(&input_dtd, mode); /* If it's a TV, we already set the output timing in mode_fixup. * Otherwise, the output timing is equal to the input timing. Due to questions raised in review, below a more elaborate analysis of the bug at hand: Sdvo seems to have two timings, one is the output timing which will be sent over whatever is connected on the other side of the sdvo chip (panel, hdmi screen, tv), the other is the input timing which will be generated by the gmch pipe. It looks like sdvo is expected to scale between the two. To make things slightly more complicated, we have a bunch of special cases: - For lvds panel we always use a fixed output timing, namely intel_sdvo->sdvo_lvds_fixed_mode, hence that special case. - Sdvo has an interface to generate a preferred input timing for a given output timing. This is the confusing thing that I've tried to clear up with the follow-on patches. - A special requirement is that the input pixel clock needs to be between 100MHz and 200MHz (likely to keep it within the electromechanical design range of PCIe), 270MHz on later gen4+. Lower pixel clocks are doubled/quadrupled. The thing this patch tries to fix is that the pipe needs to be explicitly instructed to double/quadruple the pixels and needs the correspondingly higher pixel clock, whereas the sdvo adaptor seems to do that itself and needs the unadjusted pixel clock. For the sdvo encode side we already set the pixel mutliplier with a different command (0x21). This patch tries to fix this mess by: - Keeping the output mode timing in the unadjusted plain mode, safe for the lvds case. - Storing the input timing in the adjusted_mode with the adjusted pixel clock. This way we don't need to frob around with the core crtc mode set code. - Fixing up the pixelclock when constructing the sdvo dtd timing struct. This is why the first hunk of the patch is an integral part of the series. - Dropping the is_tv special case because input_dtd is equivalent to adjusted_mode after these changes. Follow-up patches clear this up further (by simply ripping out intel_sdvo->input_dtd because it's not needed). v2: Extend commit message with an in-depth bug analysis. Reported-and-Tested-by: Bernard Blackham Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=48157 Reviewed-by: Jesse Barnes Cc: stable@kernel.org Signed-off-by: Daniel Vetter --- drivers/gpu/drm/i915/intel_sdvo.c | 34 ++++++++++++++++--------------- 1 file changed, 18 insertions(+), 16 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index e36b171c1e7d..232d77d07d8b 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -731,6 +731,7 @@ static void intel_sdvo_get_dtd_from_mode(struct intel_sdvo_dtd *dtd, uint16_t width, height; uint16_t h_blank_len, h_sync_len, v_blank_len, v_sync_len; uint16_t h_sync_offset, v_sync_offset; + int mode_clock; width = mode->crtc_hdisplay; height = mode->crtc_vdisplay; @@ -745,7 +746,11 @@ static void intel_sdvo_get_dtd_from_mode(struct intel_sdvo_dtd *dtd, h_sync_offset = mode->crtc_hsync_start - mode->crtc_hblank_start; v_sync_offset = mode->crtc_vsync_start - mode->crtc_vblank_start; - dtd->part1.clock = mode->clock / 10; + mode_clock = mode->clock; + mode_clock /= intel_mode_get_pixel_multiplier(mode) ?: 1; + mode_clock /= 10; + dtd->part1.clock = mode_clock; + dtd->part1.h_active = width & 0xff; dtd->part1.h_blank = h_blank_len & 0xff; dtd->part1.h_high = (((width >> 8) & 0xf) << 4) | @@ -996,7 +1001,7 @@ static void intel_sdvo_mode_set(struct drm_encoder *encoder, struct intel_sdvo *intel_sdvo = to_intel_sdvo(encoder); u32 sdvox; struct intel_sdvo_in_out_map in_out; - struct intel_sdvo_dtd input_dtd; + struct intel_sdvo_dtd input_dtd, output_dtd; int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode); int rate; @@ -1021,20 +1026,13 @@ static void intel_sdvo_mode_set(struct drm_encoder *encoder, intel_sdvo->attached_output)) return; - /* We have tried to get input timing in mode_fixup, and filled into - * adjusted_mode. - */ - if (intel_sdvo->is_tv || intel_sdvo->is_lvds) { - input_dtd = intel_sdvo->input_dtd; - } else { - /* Set the output timing to the screen */ - if (!intel_sdvo_set_target_output(intel_sdvo, - intel_sdvo->attached_output)) - return; - - intel_sdvo_get_dtd_from_mode(&input_dtd, adjusted_mode); - (void) intel_sdvo_set_output_timing(intel_sdvo, &input_dtd); - } + /* lvds has a special fixed output timing. */ + if (intel_sdvo->is_lvds) + intel_sdvo_get_dtd_from_mode(&output_dtd, + intel_sdvo->sdvo_lvds_fixed_mode); + else + intel_sdvo_get_dtd_from_mode(&output_dtd, mode); + (void) intel_sdvo_set_output_timing(intel_sdvo, &output_dtd); /* Set the input timing to the screen. Assume always input 0. */ if (!intel_sdvo_set_target_input(intel_sdvo)) @@ -1052,6 +1050,10 @@ static void intel_sdvo_mode_set(struct drm_encoder *encoder, !intel_sdvo_set_tv_format(intel_sdvo)) return; + /* We have tried to get input timing in mode_fixup, and filled into + * adjusted_mode. + */ + intel_sdvo_get_dtd_from_mode(&input_dtd, adjusted_mode); (void) intel_sdvo_set_input_timing(intel_sdvo, &input_dtd); switch (pixel_multiplier) { From cd0a2bfb77a3edeecd652081e0b1a163d3b0696b Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Wed, 18 Apr 2012 17:17:19 -0400 Subject: [PATCH 217/365] pci: frv architecture needs generic setup-bus infrastructure Otherwise we get this link failure for frv's defconfig: LD .tmp_vmlinux1 drivers/built-in.o: In function `pci_assign_resource': (.text+0xbf0c): undefined reference to `pci_cardbus_resource_alignment' drivers/built-in.o: In function `pci_setup': pci.c:(.init.text+0x174): undefined reference to `pci_realloc_get_opt' pci.c:(.init.text+0x1a0): undefined reference to `pci_realloc_get_opt' make[1]: *** [.tmp_vmlinux1] Error 1 Cc: David Howells Acked-by: Bjorn Helgaas Signed-off-by: Paul Gortmaker --- drivers/pci/Makefile | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index 083a49fee56a..165274c064bc 100644 --- a/drivers/pci/Makefile +++ b/drivers/pci/Makefile @@ -42,6 +42,7 @@ obj-$(CONFIG_UNICORE32) += setup-bus.o setup-irq.o obj-$(CONFIG_PARISC) += setup-bus.o obj-$(CONFIG_SUPERH) += setup-bus.o setup-irq.o obj-$(CONFIG_PPC) += setup-bus.o +obj-$(CONFIG_FRV) += setup-bus.o obj-$(CONFIG_MIPS) += setup-bus.o setup-irq.o obj-$(CONFIG_X86_VISWS) += setup-irq.o obj-$(CONFIG_MN10300) += setup-bus.o From bc856a62c8036330cb2d95e24756285c6d8ecba2 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Wed, 18 Apr 2012 22:32:24 -0400 Subject: [PATCH 218/365] blackfin: fix compile error in bfin-lq035q1-fb.c This file has an implicit dependency on GPIO stuff, showing up as the following build failure: drivers/video/bfin-lq035q1-fb.c:369:6: error: 'GPIOF_OUT_INIT_LOW' undeclared Other more global bfin build issues prevent an automated bisect, but it really doesn't matter - simply add in the appropriate header. Cc: Florian Tobias Schandinat Acked-by: Mike Frysinger Signed-off-by: Paul Gortmaker --- drivers/video/bfin-lq035q1-fb.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/video/bfin-lq035q1-fb.c b/drivers/video/bfin-lq035q1-fb.c index 86922ac84412..353c02fe8a95 100644 --- a/drivers/video/bfin-lq035q1-fb.c +++ b/drivers/video/bfin-lq035q1-fb.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include #include From fa83af7e8f2936732459a2399df87a0b648b454d Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Wed, 18 Apr 2012 23:31:28 -0400 Subject: [PATCH 219/365] blackfin: fix ifdef fustercluck in mach-bf538/boards/ezkit.c This file has lots and lots of ifdef, around structure decls and structure usages. The failure issue was that we would build the BF538-EZKIT_defconfig and get: arch/blackfin/mach-bf538/boards/ezkit.c:924:3: error: 'bfin_lq035q1_device' undeclared here (not in a function) even though the same ifdef _appeared_ to enable both the struct declaration and the code that used it. Yet cpp was telling us we didn't have the struct, but we still had the usage of it. However, _appeared_ is the operative word. After marking all the anonymous #endif with their parent #ifdef config options, it was _then_ clear that there was a misplaced #endif that was hiding the struct declaration. The real guts of the patch boils down to this: -#endif +#endif /* CONFIG_MTD_M25P80 */ +#endif /* CONFIG_SPI_BFIN5XX */ [...] -#endif /* spi master and devices */ but since I had to tag the #endif with their respective #ifdef options to find this misplaced SPI endif, it would be silly to then go and delete them all. So they stay. Cc: Sonic Zhang Cc: Bob Liu Acked-by: Mike Frysinger Signed-off-by: Paul Gortmaker --- arch/blackfin/mach-bf538/boards/ezkit.c | 53 ++++++++++++------------- 1 file changed, 26 insertions(+), 27 deletions(-) diff --git a/arch/blackfin/mach-bf538/boards/ezkit.c b/arch/blackfin/mach-bf538/boards/ezkit.c index 1633a6f306c0..85038f54354d 100644 --- a/arch/blackfin/mach-bf538/boards/ezkit.c +++ b/arch/blackfin/mach-bf538/boards/ezkit.c @@ -38,7 +38,7 @@ static struct platform_device rtc_device = { .name = "rtc-bfin", .id = -1, }; -#endif +#endif /* CONFIG_RTC_DRV_BFIN */ #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) #ifdef CONFIG_SERIAL_BFIN_UART0 @@ -100,7 +100,7 @@ static struct platform_device bfin_uart0_device = { .platform_data = &bfin_uart0_peripherals, /* Passed to driver */ }, }; -#endif +#endif /* CONFIG_SERIAL_BFIN_UART0 */ #ifdef CONFIG_SERIAL_BFIN_UART1 static struct resource bfin_uart1_resources[] = { { @@ -148,7 +148,7 @@ static struct platform_device bfin_uart1_device = { .platform_data = &bfin_uart1_peripherals, /* Passed to driver */ }, }; -#endif +#endif /* CONFIG_SERIAL_BFIN_UART1 */ #ifdef CONFIG_SERIAL_BFIN_UART2 static struct resource bfin_uart2_resources[] = { { @@ -196,8 +196,8 @@ static struct platform_device bfin_uart2_device = { .platform_data = &bfin_uart2_peripherals, /* Passed to driver */ }, }; -#endif -#endif +#endif /* CONFIG_SERIAL_BFIN_UART2 */ +#endif /* CONFIG_SERIAL_BFIN */ #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) #ifdef CONFIG_BFIN_SIR0 @@ -224,7 +224,7 @@ static struct platform_device bfin_sir0_device = { .num_resources = ARRAY_SIZE(bfin_sir0_resources), .resource = bfin_sir0_resources, }; -#endif +#endif /* CONFIG_BFIN_SIR0 */ #ifdef CONFIG_BFIN_SIR1 static struct resource bfin_sir1_resources[] = { { @@ -249,7 +249,7 @@ static struct platform_device bfin_sir1_device = { .num_resources = ARRAY_SIZE(bfin_sir1_resources), .resource = bfin_sir1_resources, }; -#endif +#endif /* CONFIG_BFIN_SIR1 */ #ifdef CONFIG_BFIN_SIR2 static struct resource bfin_sir2_resources[] = { { @@ -274,8 +274,8 @@ static struct platform_device bfin_sir2_device = { .num_resources = ARRAY_SIZE(bfin_sir2_resources), .resource = bfin_sir2_resources, }; -#endif -#endif +#endif /* CONFIG_BFIN_SIR2 */ +#endif /* CONFIG_BFIN_SIR */ #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART @@ -311,7 +311,7 @@ static struct platform_device bfin_sport0_uart_device = { .platform_data = &bfin_sport0_peripherals, /* Passed to driver */ }, }; -#endif +#endif /* CONFIG_SERIAL_BFIN_SPORT0_UART */ #ifdef CONFIG_SERIAL_BFIN_SPORT1_UART static struct resource bfin_sport1_uart_resources[] = { { @@ -345,7 +345,7 @@ static struct platform_device bfin_sport1_uart_device = { .platform_data = &bfin_sport1_peripherals, /* Passed to driver */ }, }; -#endif +#endif /* CONFIG_SERIAL_BFIN_SPORT1_UART */ #ifdef CONFIG_SERIAL_BFIN_SPORT2_UART static struct resource bfin_sport2_uart_resources[] = { { @@ -379,7 +379,7 @@ static struct platform_device bfin_sport2_uart_device = { .platform_data = &bfin_sport2_peripherals, /* Passed to driver */ }, }; -#endif +#endif /* CONFIG_SERIAL_BFIN_SPORT2_UART */ #ifdef CONFIG_SERIAL_BFIN_SPORT3_UART static struct resource bfin_sport3_uart_resources[] = { { @@ -413,8 +413,8 @@ static struct platform_device bfin_sport3_uart_device = { .platform_data = &bfin_sport3_peripherals, /* Passed to driver */ }, }; -#endif -#endif +#endif /* CONFIG_SERIAL_BFIN_SPORT3_UART */ +#endif /* CONFIG_SERIAL_BFIN_SPORT */ #if defined(CONFIG_CAN_BFIN) || defined(CONFIG_CAN_BFIN_MODULE) static unsigned short bfin_can_peripherals[] = { @@ -452,7 +452,7 @@ static struct platform_device bfin_can_device = { .platform_data = &bfin_can_peripherals, /* Passed to driver */ }, }; -#endif +#endif /* CONFIG_CAN_BFIN */ /* * USB-LAN EzExtender board @@ -488,7 +488,7 @@ static struct platform_device smc91x_device = { .platform_data = &smc91x_info, }, }; -#endif +#endif /* CONFIG_SMC91X */ #if defined(CONFIG_SPI_BFIN5XX) || defined(CONFIG_SPI_BFIN5XX_MODULE) /* all SPI peripherals info goes here */ @@ -518,7 +518,8 @@ static struct flash_platform_data bfin_spi_flash_data = { static struct bfin5xx_spi_chip spi_flash_chip_info = { .enable_dma = 0, /* use dma transfer with this chip*/ }; -#endif +#endif /* CONFIG_MTD_M25P80 */ +#endif /* CONFIG_SPI_BFIN5XX */ #if defined(CONFIG_TOUCHSCREEN_AD7879) || defined(CONFIG_TOUCHSCREEN_AD7879_MODULE) #include @@ -535,7 +536,7 @@ static const struct ad7879_platform_data bfin_ad7879_ts_info = { .gpio_export = 1, /* Export GPIO to gpiolib */ .gpio_base = -1, /* Dynamic allocation */ }; -#endif +#endif /* CONFIG_TOUCHSCREEN_AD7879 */ #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) #include @@ -564,7 +565,7 @@ static struct platform_device bfin_lq035q1_device = { .platform_data = &bfin_lq035q1_data, }, }; -#endif +#endif /* CONFIG_FB_BFIN_LQ035Q1 */ static struct spi_board_info bf538_spi_board_info[] __initdata = { #if defined(CONFIG_MTD_M25P80) \ @@ -579,7 +580,7 @@ static struct spi_board_info bf538_spi_board_info[] __initdata = { .controller_data = &spi_flash_chip_info, .mode = SPI_MODE_3, }, -#endif +#endif /* CONFIG_MTD_M25P80 */ #if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE) { .modalias = "ad7879", @@ -590,7 +591,7 @@ static struct spi_board_info bf538_spi_board_info[] __initdata = { .chip_select = 1, .mode = SPI_CPHA | SPI_CPOL, }, -#endif +#endif /* CONFIG_TOUCHSCREEN_AD7879_SPI */ #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE) { .modalias = "bfin-lq035q1-spi", @@ -599,7 +600,7 @@ static struct spi_board_info bf538_spi_board_info[] __initdata = { .chip_select = 2, .mode = SPI_CPHA | SPI_CPOL, }, -#endif +#endif /* CONFIG_FB_BFIN_LQ035Q1 */ #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) { .modalias = "spidev", @@ -607,7 +608,7 @@ static struct spi_board_info bf538_spi_board_info[] __initdata = { .bus_num = 0, .chip_select = 1, }, -#endif +#endif /* CONFIG_SPI_SPIDEV */ }; /* SPI (0) */ @@ -716,8 +717,6 @@ static struct platform_device bf538_spi_master2 = { }, }; -#endif /* spi master and devices */ - #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) static struct resource bfin_twi0_resource[] = { [0] = { @@ -759,8 +758,8 @@ static struct platform_device i2c_bfin_twi1_device = { .num_resources = ARRAY_SIZE(bfin_twi1_resource), .resource = bfin_twi1_resource, }; -#endif -#endif +#endif /* CONFIG_BF542 */ +#endif /* CONFIG_I2C_BLACKFIN_TWI */ #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) #include From 89f21cc050d5eed8eeffee5b46297fb7a74ef9dd Mon Sep 17 00:00:00 2001 From: Rupesh Gujare Date: Wed, 25 Apr 2012 23:54:58 +0100 Subject: [PATCH 220/365] staging: ozwpan: Fix bug where kfree is called twice. Signed-off-by: Rupesh Gujare Signed-off-by: Chris Kelly Signed-off-by: Greg Kroah-Hartman --- drivers/staging/ozwpan/ozpd.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/staging/ozwpan/ozpd.c b/drivers/staging/ozwpan/ozpd.c index 2b45d3d1800c..04cd57f2a6da 100644 --- a/drivers/staging/ozwpan/ozpd.c +++ b/drivers/staging/ozwpan/ozpd.c @@ -383,8 +383,6 @@ static void oz_tx_frame_free(struct oz_pd *pd, struct oz_tx_frame *f) pd->tx_pool = &f->link; pd->tx_pool_count++; f = 0; - } else { - kfree(f); } spin_unlock_bh(&pd->tx_frame_lock); if (f) From 8b6efb75e9467f7c2df279cbd657f741ec3493cf Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Thu, 26 Apr 2012 10:27:18 +0000 Subject: [PATCH 221/365] MAINTAINERS: update sctp maintainer address Update my email address. Signed-off-by: Vlad Yasevich Signed-off-by: David S. Miller --- MAINTAINERS | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index bb76fc42fc42..57bc6770f37a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -5892,11 +5892,11 @@ F: Documentation/scsi/st.txt F: drivers/scsi/st* SCTP PROTOCOL -M: Vlad Yasevich +M: Vlad Yasevich M: Sridhar Samudrala L: linux-sctp@vger.kernel.org W: http://lksctp.sourceforge.net -S: Supported +S: Maintained F: Documentation/networking/sctp.txt F: include/linux/sctp.h F: include/net/sctp/ From df88b2d96e36d9a9e325bfcd12eb45671cbbc937 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Thu, 26 Apr 2012 13:13:21 -0400 Subject: [PATCH 222/365] xen/enlighten: Disable MWAIT_LEAF so that acpi-pad won't be loaded. There are exactly four users of __monitor and __mwait: - cstate.c (which allows acpi_processor_ffh_cstate_enter to be called when the cpuidle API drivers are used. However patch "cpuidle: replace xen access to x86 pm_idle and default_idle" provides a mechanism to disable the cpuidle and use safe_halt. - smpboot (which allows mwait_play_dead to be called). However safe_halt is always used so we skip that. - intel_idle (same deal as above). - acpi_pad.c. This the one that we do not want to run as we will hit the below crash. Why do we want to expose MWAIT_LEAF in the first place? We want it for the xen-acpi-processor driver - which uploads C-states to the hypervisor. If MWAIT_LEAF is set, the cstate.c sets the proper address in the C-states so that the hypervisor can benefit from using the MWAIT functionality. And that is the sole reason for using it. Without this patch, if a module performs mwait or monitor we get this: invalid opcode: 0000 [#1] SMP CPU 2 .. snip.. Pid: 5036, comm: insmod Tainted: G O 3.4.0-rc2upstream-dirty #2 Intel Corporation S2600CP/S2600CP RIP: e030:[] [] mwait_check_init+0x17/0x1000 [mwait_check] RSP: e02b:ffff8801c298bf18 EFLAGS: 00010282 RAX: ffff8801c298a010 RBX: ffffffffa03b2000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff8801c29800d8 RDI: ffff8801ff097200 RBP: ffff8801c298bf18 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000 R13: ffffffffa000a000 R14: 0000005148db7294 R15: 0000000000000003 FS: 00007fbb364f2700(0000) GS:ffff8801ff08c000(0000) knlGS:0000000000000000 CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 000000000179f038 CR3: 00000001c9469000 CR4: 0000000000002660 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process insmod (pid: 5036, threadinfo ffff8801c298a000, task ffff8801c29cd7e0) Stack: ffff8801c298bf48 ffffffff81002124 ffffffffa03b2000 00000000000081fd 000000000178f010 000000000178f030 ffff8801c298bf78 ffffffff810c41e6 00007fff3fb30db9 00007fff3fb30db9 00000000000081fd 0000000000010000 Call Trace: [] do_one_initcall+0x124/0x170 [] sys_init_module+0xc6/0x220 [] system_call_fastpath+0x16/0x1b Code: <0f> 01 c8 31 c0 0f 01 c9 c9 c3 00 00 00 00 00 00 00 00 00 00 00 00 RIP [] mwait_check_init+0x17/0x1000 [mwait_check] RSP ---[ end trace 16582fc8a3d1e29a ]--- Kernel panic - not syncing: Fatal exception With this module (which is what acpi_pad.c would hit): MODULE_AUTHOR("Konrad Rzeszutek Wilk "); MODULE_DESCRIPTION("mwait_check_and_back"); MODULE_LICENSE("GPL"); MODULE_VERSION(); static int __init mwait_check_init(void) { __monitor((void *)¤t_thread_info()->flags, 0, 0); __mwait(0, 0); return 0; } static void __exit mwait_check_exit(void) { } module_init(mwait_check_init); module_exit(mwait_check_exit); Reported-by: Liu, Jinsong Signed-off-by: Konrad Rzeszutek Wilk --- arch/x86/xen/enlighten.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 4f51bebac02c..a8f8844b8d32 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -261,7 +261,8 @@ static void xen_cpuid(unsigned int *ax, unsigned int *bx, static bool __init xen_check_mwait(void) { -#ifdef CONFIG_ACPI +#if defined(CONFIG_ACPI) && !defined(CONFIG_ACPI_PROCESSOR_AGGREGATOR) && \ + !defined(CONFIG_ACPI_PROCESSOR_AGGREGATOR_MODULE) struct xen_platform_op op = { .cmd = XENPF_set_processor_pminfo, .u.set_pminfo.id = -1, @@ -349,7 +350,6 @@ static void __init xen_init_cpuid_mask(void) /* Xen will set CR4.OSXSAVE if supported and not disabled by force */ if ((cx & xsave_mask) != xsave_mask) cpuid_leaf1_ecx_mask &= ~xsave_mask; /* disable XSAVE & OSXSAVE */ - if (xen_check_mwait()) cpuid_leaf1_ecx_set_mask = (1 << (X86_FEATURE_MWAIT % 32)); } From 521394e4e679996955bc351cb6b64639751db2ff Mon Sep 17 00:00:00 2001 From: Stefano Stabellini Date: Wed, 25 Apr 2012 16:11:38 +0100 Subject: [PATCH 223/365] xen: use the pirq number to check the pirq_eoi_map In pirq_check_eoi_map use the pirq number rather than the Linux irq number to check whether an eoi is needed in the pirq_eoi_map. The reason is that the irq number is not always identical to the pirq number so if we wrongly use the irq number to check the pirq_eoi_map we are going to check for the wrong pirq to EOI. As a consequence some interrupts might not be EOI'ed by the guest correctly. Signed-off-by: Stefano Stabellini Tested-by: Tobias Geiger [v1: Added some extra wording to git commit] Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/events.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/xen/events.c b/drivers/xen/events.c index 4b33acd8ed4e..0a8a17cd80be 100644 --- a/drivers/xen/events.c +++ b/drivers/xen/events.c @@ -274,7 +274,7 @@ static unsigned int cpu_from_evtchn(unsigned int evtchn) static bool pirq_check_eoi_map(unsigned irq) { - return test_bit(irq, pirq_eoi_map); + return test_bit(pirq_from_irq(irq), pirq_eoi_map); } static bool pirq_needs_eoi_flag(unsigned irq) From 8e12a038f88e819c878e5697ff681cb08bcebb08 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Thu, 26 Apr 2012 14:23:22 -0400 Subject: [PATCH 224/365] xtensa: fix build fail on undefined ack_bad_irq Commit e520c410854bab763be24e0fce7ba89dc252efee "xtensa: convert to asm-generic/hardirq.h" converted over to using the asm-generic parts, but it also added the sentinel #define ack_bad_irq ack_bad_irq which tells asm-generic to _not_ use the common ack_bad_irq. Since e520c41 deleted the duplicated code from the arch specific file, we _do_ want the asm-generic one in scope. So delete the trigger define above which hides it. In doing so we'll realize that we've got to delete the almost-duplicate prototype as well to avoid "static declaration ... follows non-static". Cc: Christoph Hellwig Cc: Chris Zankel Signed-off-by: Paul Gortmaker --- arch/xtensa/include/asm/hardirq.h | 3 --- 1 file changed, 3 deletions(-) diff --git a/arch/xtensa/include/asm/hardirq.h b/arch/xtensa/include/asm/hardirq.h index 26664cef8f11..91695a135498 100644 --- a/arch/xtensa/include/asm/hardirq.h +++ b/arch/xtensa/include/asm/hardirq.h @@ -11,9 +11,6 @@ #ifndef _XTENSA_HARDIRQ_H #define _XTENSA_HARDIRQ_H -void ack_bad_irq(unsigned int irq); -#define ack_bad_irq ack_bad_irq - #include #endif /* _XTENSA_HARDIRQ_H */ From 8598f3cd80c860173d9b35d91c3dcb93eee13b54 Mon Sep 17 00:00:00 2001 From: Matt Fleming Date: Tue, 14 Feb 2012 11:40:52 +0000 Subject: [PATCH 225/365] MIPS: Use set_current_blocked() and block_sigmask() As described in e6fa16ab ("signal: sigprocmask() should do retarget_shared_pending()") the modification of current->blocked is incorrect as we need to check whether the signal we're about to block is pending in the shared queue. Also, use the new helper function introduced in commit 5e6292c0f28f ("signal: add block_sigmask() for adding sigmask to current->blocked") which centralises the code for updating current->blocked after successfully delivering a signal and reduces the amount of duplicate code across architectures. In the past some architectures got this code wrong, so using this helper function should stop that from happening again. Cc: Oleg Nesterov Cc: Andrew Morton Cc: linux-kernel@vger.kernel.org Cc: Al Viro Cc: David Daney Cc: linux-mips@linux-mips.org Signed-off-by: Matt Fleming Patchwork: https://patchwork.linux-mips.org/patch/3363/ Signed-off-by: Ralf Baechle --- arch/mips/kernel/signal.c | 27 +++++---------------------- arch/mips/kernel/signal32.c | 20 ++++---------------- arch/mips/kernel/signal_n32.c | 10 ++-------- 3 files changed, 11 insertions(+), 46 deletions(-) diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c index 185ca00c4c84..d5a338a1739c 100644 --- a/arch/mips/kernel/signal.c +++ b/arch/mips/kernel/signal.c @@ -257,11 +257,8 @@ asmlinkage int sys_sigsuspend(nabi_no_regargs struct pt_regs regs) return -EFAULT; sigdelsetmask(&newset, ~_BLOCKABLE); - spin_lock_irq(¤t->sighand->siglock); current->saved_sigmask = current->blocked; - current->blocked = newset; - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); + set_current_blocked(&newset); current->state = TASK_INTERRUPTIBLE; schedule(); @@ -286,11 +283,8 @@ asmlinkage int sys_rt_sigsuspend(nabi_no_regargs struct pt_regs regs) return -EFAULT; sigdelsetmask(&newset, ~_BLOCKABLE); - spin_lock_irq(¤t->sighand->siglock); current->saved_sigmask = current->blocked; - current->blocked = newset; - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); + set_current_blocked(&newset); current->state = TASK_INTERRUPTIBLE; schedule(); @@ -362,10 +356,7 @@ asmlinkage void sys_sigreturn(nabi_no_regargs struct pt_regs regs) goto badframe; sigdelsetmask(&blocked, ~_BLOCKABLE); - spin_lock_irq(¤t->sighand->siglock); - current->blocked = blocked; - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); + set_current_blocked(&blocked); sig = restore_sigcontext(®s, &frame->sf_sc); if (sig < 0) @@ -401,10 +392,7 @@ asmlinkage void sys_rt_sigreturn(nabi_no_regargs struct pt_regs regs) goto badframe; sigdelsetmask(&set, ~_BLOCKABLE); - spin_lock_irq(¤t->sighand->siglock); - current->blocked = set; - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); + set_current_blocked(&set); sig = restore_sigcontext(®s, &frame->rs_uc.uc_mcontext); if (sig < 0) @@ -580,12 +568,7 @@ static int handle_signal(unsigned long sig, siginfo_t *info, if (ret) return ret; - spin_lock_irq(¤t->sighand->siglock); - sigorsets(¤t->blocked, ¤t->blocked, &ka->sa.sa_mask); - if (!(ka->sa.sa_flags & SA_NODEFER)) - sigaddset(¤t->blocked, sig); - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); + block_sigmask(ka, sig); return ret; } diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c index 06b5da392e24..ac3b8d89aae5 100644 --- a/arch/mips/kernel/signal32.c +++ b/arch/mips/kernel/signal32.c @@ -290,11 +290,8 @@ asmlinkage int sys32_sigsuspend(nabi_no_regargs struct pt_regs regs) return -EFAULT; sigdelsetmask(&newset, ~_BLOCKABLE); - spin_lock_irq(¤t->sighand->siglock); current->saved_sigmask = current->blocked; - current->blocked = newset; - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); + set_current_blocked(&newset); current->state = TASK_INTERRUPTIBLE; schedule(); @@ -318,11 +315,8 @@ asmlinkage int sys32_rt_sigsuspend(nabi_no_regargs struct pt_regs regs) return -EFAULT; sigdelsetmask(&newset, ~_BLOCKABLE); - spin_lock_irq(¤t->sighand->siglock); current->saved_sigmask = current->blocked; - current->blocked = newset; - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); + set_current_blocked(&newset); current->state = TASK_INTERRUPTIBLE; schedule(); @@ -488,10 +482,7 @@ asmlinkage void sys32_sigreturn(nabi_no_regargs struct pt_regs regs) goto badframe; sigdelsetmask(&blocked, ~_BLOCKABLE); - spin_lock_irq(¤t->sighand->siglock); - current->blocked = blocked; - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); + set_current_blocked(&blocked); sig = restore_sigcontext32(®s, &frame->sf_sc); if (sig < 0) @@ -529,10 +520,7 @@ asmlinkage void sys32_rt_sigreturn(nabi_no_regargs struct pt_regs regs) goto badframe; sigdelsetmask(&set, ~_BLOCKABLE); - spin_lock_irq(¤t->sighand->siglock); - current->blocked = set; - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); + set_current_blocked(&set); sig = restore_sigcontext32(®s, &frame->rs_uc.uc_mcontext); if (sig < 0) diff --git a/arch/mips/kernel/signal_n32.c b/arch/mips/kernel/signal_n32.c index ae29e894ab8d..86eb4b04631c 100644 --- a/arch/mips/kernel/signal_n32.c +++ b/arch/mips/kernel/signal_n32.c @@ -93,11 +93,8 @@ asmlinkage int sysn32_rt_sigsuspend(nabi_no_regargs struct pt_regs regs) sigset_from_compat(&newset, &uset); sigdelsetmask(&newset, ~_BLOCKABLE); - spin_lock_irq(¤t->sighand->siglock); current->saved_sigmask = current->blocked; - current->blocked = newset; - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); + set_current_blocked(&newset); current->state = TASK_INTERRUPTIBLE; schedule(); @@ -121,10 +118,7 @@ asmlinkage void sysn32_rt_sigreturn(nabi_no_regargs struct pt_regs regs) goto badframe; sigdelsetmask(&set, ~_BLOCKABLE); - spin_lock_irq(¤t->sighand->siglock); - current->blocked = set; - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); + set_current_blocked(&set); sig = restore_sigcontext(®s, &frame->rs_uc.uc_mcontext); if (sig < 0) From 05c8be02a98344148529441b28c0a8ce931dd6a8 Mon Sep 17 00:00:00 2001 From: Antony Pavlov Date: Wed, 7 Mar 2012 12:19:43 +0400 Subject: [PATCH 226/365] MIPS: JZ4740: Fix the JZ4740_IRQ_DMA macro Signed-off-by: Antony Pavlov Cc: Lars-Peter Clausen Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3459/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/mach-jz4740/irq.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/include/asm/mach-jz4740/irq.h b/arch/mips/include/asm/mach-jz4740/irq.h index a865c983c70a..5ad1a9c113c6 100644 --- a/arch/mips/include/asm/mach-jz4740/irq.h +++ b/arch/mips/include/asm/mach-jz4740/irq.h @@ -45,7 +45,7 @@ #define JZ4740_IRQ_LCD JZ4740_IRQ(30) /* 2nd-level interrupts */ -#define JZ4740_IRQ_DMA(x) (JZ4740_IRQ(32) + (X)) +#define JZ4740_IRQ_DMA(x) (JZ4740_IRQ(32) + (x)) #define JZ4740_IRQ_INTC_GPIO(x) (JZ4740_IRQ_GPIO0 - (x)) #define JZ4740_IRQ_GPIO(x) (JZ4740_IRQ(48) + (x)) From 5c22837adca7c30b66121cf18ad3e160134268d4 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Thu, 26 Apr 2012 21:59:10 +0200 Subject: [PATCH 227/365] USB: cdc-wdm: fix race leading leading to memory corruption MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch fixes a race whereby a pointer to a buffer would be overwritten while the buffer was in use leading to a double free and a memory leak. This causes crashes. This bug was introduced in 2.6.34 Signed-off-by: Oliver Neukum Tested-by: Bjørn Mork Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-wdm.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index c6f6560d436c..0bb2b3248dad 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -157,8 +157,9 @@ static void wdm_out_callback(struct urb *urb) spin_lock(&desc->iuspin); desc->werr = urb->status; spin_unlock(&desc->iuspin); - clear_bit(WDM_IN_USE, &desc->flags); kfree(desc->outbuf); + desc->outbuf = NULL; + clear_bit(WDM_IN_USE, &desc->flags); wake_up(&desc->wait); } @@ -338,7 +339,7 @@ static ssize_t wdm_write if (we < 0) return -EIO; - desc->outbuf = buf = kmalloc(count, GFP_KERNEL); + buf = kmalloc(count, GFP_KERNEL); if (!buf) { rv = -ENOMEM; goto outnl; @@ -406,10 +407,12 @@ static ssize_t wdm_write req->wIndex = desc->inum; req->wLength = cpu_to_le16(count); set_bit(WDM_IN_USE, &desc->flags); + desc->outbuf = buf; rv = usb_submit_urb(desc->command, GFP_KERNEL); if (rv < 0) { kfree(buf); + desc->outbuf = NULL; clear_bit(WDM_IN_USE, &desc->flags); dev_err(&desc->intf->dev, "Tx URB error: %d\n", rv); } else { From ec2ccd884ab1e190bc5ddb210c7d5f5ea2ddeba3 Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Fri, 27 Apr 2012 11:12:38 +0930 Subject: [PATCH 228/365] sh: Fix up tracepoint build fallout from static key introduction. With the introduction of static keys, anything using tracepoints blows up in the following manner: include/trace/events/oom.h:8:13: error: initializer element is not constant include/trace/events/oom.h:8:13: error: (near initialization for '__tracepoint_oom_score_adj_update') include/trace/events/oom.h:8:13: error: initializer element is not constant include/trace/events/oom.h:8:13: error: (near initialization for '__tracepoint_oom_score_adj_update.key') This is a result of the STATIC_KEY_INIT_xxx defs wrapping ATOMIC_INIT() which on sh includes an atomic_t typecast. Given that we don't really need the typecast for anything anymore, the simplest solution is simply to kill off the cast. Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: Paul Mundt --- arch/sh/include/asm/atomic.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sh/include/asm/atomic.h b/arch/sh/include/asm/atomic.h index 37f2f4a55231..f4c1c20bcdf6 100644 --- a/arch/sh/include/asm/atomic.h +++ b/arch/sh/include/asm/atomic.h @@ -11,7 +11,7 @@ #include #include -#define ATOMIC_INIT(i) ( (atomic_t) { (i) } ) +#define ATOMIC_INIT(i) { (i) } #define atomic_read(v) (*(volatile int *)&(v)->counter) #define atomic_set(v,i) ((v)->counter = (i)) From cf405ae612b0f7e2358db7ff594c0e94846137aa Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Thu, 26 Apr 2012 13:50:03 -0400 Subject: [PATCH 229/365] xen/smp: Fix crash when booting with ACPI hotplug CPUs. When we boot on a machine that can hotplug CPUs and we are using 'dom0_max_vcpus=X' on the Xen hypervisor line to clip the amount of CPUs available to the initial domain, we get this: (XEN) Command line: com1=115200,8n1 dom0_mem=8G noreboot dom0_max_vcpus=8 sync_console mce_verbosity=verbose console=com1,vga loglvl=all guest_loglvl=all .. snip.. DMI: Intel Corporation S2600CP/S2600CP, BIOS SE5C600.86B.99.99.x032.072520111118 07/25/2011 .. snip. SMP: Allowing 64 CPUs, 32 hotplug CPUs installing Xen timer for CPU 7 cpu 7 spinlock event irq 361 NMI watchdog: disabled (cpu7): hardware events not enabled Brought up 8 CPUs .. snip.. [acpi processor finds the CPUs are not initialized and starts calling arch_register_cpu, which creates /sys/devices/system/cpu/cpu8/online] CPU 8 got hotplugged CPU 9 got hotplugged CPU 10 got hotplugged .. snip.. initcall 1_acpi_battery_init_async+0x0/0x1b returned 0 after 406 usecs calling erst_init+0x0/0x2bb @ 1 [and the scheduler sticks newly started tasks on the new CPUs, but said CPUs cannot be initialized b/c the hypervisor has limited the amount of vCPUS to 8 - as per the dom0_max_vcpus=8 flag. The spinlock tries to kick the other CPU, but the structure for that is not initialized and we crash.] BUG: unable to handle kernel paging request at fffffffffffffed8 IP: [] xen_spin_lock+0x29/0x60 PGD 180d067 PUD 180e067 PMD 0 Oops: 0002 [#1] SMP CPU 7 Modules linked in: Pid: 1, comm: swapper/0 Not tainted 3.4.0-rc2upstream-00001-gf5154e8 #1 Intel Corporation S2600CP/S2600CP RIP: e030:[] [] xen_spin_lock+0x29/0x60 RSP: e02b:ffff8801fb9b3a70 EFLAGS: 00010282 With this patch, we cap the amount of vCPUS that the initial domain can run, to exactly what dom0_max_vcpus=X has specified. In the future, if there is a hypercall that will allow a running domain to expand past its initial set of vCPUS, this patch should be re-evaluated. CC: stable@kernel.org Signed-off-by: Konrad Rzeszutek Wilk --- arch/x86/xen/smp.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c index 5fac6919b957..0503c0c493a9 100644 --- a/arch/x86/xen/smp.c +++ b/arch/x86/xen/smp.c @@ -178,6 +178,7 @@ static void __init xen_fill_possible_map(void) static void __init xen_filter_cpu_maps(void) { int i, rc; + unsigned int subtract = 0; if (!xen_initial_domain()) return; @@ -192,8 +193,22 @@ static void __init xen_filter_cpu_maps(void) } else { set_cpu_possible(i, false); set_cpu_present(i, false); + subtract++; } } +#ifdef CONFIG_HOTPLUG_CPU + /* This is akin to using 'nr_cpus' on the Linux command line. + * Which is OK as when we use 'dom0_max_vcpus=X' we can only + * have up to X, while nr_cpu_ids is greater than X. This + * normally is not a problem, except when CPU hotplugging + * is involved and then there might be more than X CPUs + * in the guest - which will not work as there is no + * hypercall to expand the max number of VCPUs an already + * running guest has. So cap it up to X. */ + if (subtract) + nr_cpu_ids = nr_cpu_ids - subtract; +#endif + } static void __init xen_smp_prepare_boot_cpu(void) From b930fe5e1f5646e071facda70b25b137ebeae5af Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Thu, 26 Apr 2012 14:22:33 -0400 Subject: [PATCH 230/365] xen/acpi: Workaround broken BIOSes exporting non-existing C-states. We did a similar check for the P-states but did not do it for the C-states. What we want to do is ignore cases where the DSDT has definition for sixteen CPUs, but the machine only has eight CPUs and we get: xen-acpi-processor: (CX): Hypervisor error (-22) for ACPI CPU14 Reported-by: Tobias Geiger Signed-off-by: Konrad Rzeszutek Wilk --- drivers/xen/xen-acpi-processor.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/xen/xen-acpi-processor.c b/drivers/xen/xen-acpi-processor.c index 174b5653cd8a..0b48579a9cd6 100644 --- a/drivers/xen/xen-acpi-processor.c +++ b/drivers/xen/xen-acpi-processor.c @@ -128,7 +128,10 @@ static int push_cxx_to_hypervisor(struct acpi_processor *_pr) pr_debug(" C%d: %s %d uS\n", cx->type, cx->desc, (u32)cx->latency); } - } else + } else if (ret != -EINVAL) + /* EINVAL means the ACPI ID is incorrect - meaning the ACPI + * table is referencing a non-existing CPU - which can happen + * with broken ACPI tables. */ pr_err(DRV_NAME "(CX): Hypervisor error (%d) for ACPI CPU%u\n", ret, _pr->acpi_id); From b95ace54a23e2f8ebb032744cebb17c9f43bf651 Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Sun, 22 Apr 2012 13:37:24 +0200 Subject: [PATCH 231/365] ARM: pxa: fix gpio wakeup setting In 3.3, gpio wakeup setting was broken. The call enable_irq_wake() didn't set up the PXA gpio registers (PWER, ...) anymore. Fix it at least for pxa27x. The driver doesn't seem to be used in pxa25x (weird ...), and the fix doesn't extend to pxa3xx and pxa95x (which don't have a gpio_set_wake() available). Signed-off-by: Robert Jarzmik Signed-off-by: Haojian Zhuang --- arch/arm/mach-pxa/pxa27x.c | 6 +++++- drivers/gpio/gpio-pxa.c | 21 +++++++++++++++++++-- include/linux/gpio-pxa.h | 4 ++++ 3 files changed, 28 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 6bce78edce7a..4726c246dcdc 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -421,8 +421,11 @@ void __init pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info) pxa_register_device(&pxa27x_device_i2c_power, info); } +static struct pxa_gpio_platform_data pxa27x_gpio_info __initdata = { + .gpio_set_wake = gpio_set_wake, +}; + static struct platform_device *devices[] __initdata = { - &pxa_device_gpio, &pxa27x_device_udc, &pxa_device_pmu, &pxa_device_i2s, @@ -458,6 +461,7 @@ static int __init pxa27x_init(void) register_syscore_ops(&pxa2xx_mfp_syscore_ops); register_syscore_ops(&pxa2xx_clock_syscore_ops); + pxa_register_device(&pxa_device_gpio, &pxa27x_gpio_info); ret = platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/drivers/gpio/gpio-pxa.c b/drivers/gpio/gpio-pxa.c index 5689ce62fd81..fc3ace3fd4cb 100644 --- a/drivers/gpio/gpio-pxa.c +++ b/drivers/gpio/gpio-pxa.c @@ -64,6 +64,7 @@ struct pxa_gpio_chip { unsigned long irq_mask; unsigned long irq_edge_rise; unsigned long irq_edge_fall; + int (*set_wake)(unsigned int gpio, unsigned int on); #ifdef CONFIG_PM unsigned long saved_gplr; @@ -269,7 +270,8 @@ static void pxa_gpio_set(struct gpio_chip *chip, unsigned offset, int value) (value ? GPSR_OFFSET : GPCR_OFFSET)); } -static int __devinit pxa_init_gpio_chip(int gpio_end) +static int __devinit pxa_init_gpio_chip(int gpio_end, + int (*set_wake)(unsigned int, unsigned int)) { int i, gpio, nbanks = gpio_to_bank(gpio_end) + 1; struct pxa_gpio_chip *chips; @@ -285,6 +287,7 @@ static int __devinit pxa_init_gpio_chip(int gpio_end) sprintf(chips[i].label, "gpio-%d", i); chips[i].regbase = gpio_reg_base + BANK_OFF(i); + chips[i].set_wake = set_wake; c->base = gpio; c->label = chips[i].label; @@ -412,6 +415,17 @@ static void pxa_mask_muxed_gpio(struct irq_data *d) writel_relaxed(gfer, c->regbase + GFER_OFFSET); } +static int pxa_gpio_set_wake(struct irq_data *d, unsigned int on) +{ + int gpio = pxa_irq_to_gpio(d->irq); + struct pxa_gpio_chip *c = gpio_to_pxachip(gpio); + + if (c->set_wake) + return c->set_wake(gpio, on); + else + return 0; +} + static void pxa_unmask_muxed_gpio(struct irq_data *d) { int gpio = pxa_irq_to_gpio(d->irq); @@ -427,6 +441,7 @@ static struct irq_chip pxa_muxed_gpio_chip = { .irq_mask = pxa_mask_muxed_gpio, .irq_unmask = pxa_unmask_muxed_gpio, .irq_set_type = pxa_gpio_irq_type, + .irq_set_wake = pxa_gpio_set_wake, }; static int pxa_gpio_nums(void) @@ -471,6 +486,7 @@ static int __devinit pxa_gpio_probe(struct platform_device *pdev) struct pxa_gpio_chip *c; struct resource *res; struct clk *clk; + struct pxa_gpio_platform_data *info; int gpio, irq, ret; int irq0 = 0, irq1 = 0, irq_mux, gpio_offset = 0; @@ -516,7 +532,8 @@ static int __devinit pxa_gpio_probe(struct platform_device *pdev) } /* Initialize GPIO chips */ - pxa_init_gpio_chip(pxa_last_gpio); + info = dev_get_platdata(&pdev->dev); + pxa_init_gpio_chip(pxa_last_gpio, info ? info->gpio_set_wake : NULL); /* clear all GPIO edge detects */ for_each_gpio_chip(gpio, c) { diff --git a/include/linux/gpio-pxa.h b/include/linux/gpio-pxa.h index 05071ee34c3f..d755b28ba635 100644 --- a/include/linux/gpio-pxa.h +++ b/include/linux/gpio-pxa.h @@ -13,4 +13,8 @@ extern int pxa_last_gpio; extern int pxa_irq_to_gpio(int irq); +struct pxa_gpio_platform_data { + int (*gpio_set_wake)(unsigned int gpio, unsigned int on); +}; + #endif /* __GPIO_PXA_H */ From 9f9d27e3f3317f39c91c286b6184f1ca05452968 Mon Sep 17 00:00:00 2001 From: Dmitry Artamonow Date: Sat, 14 Apr 2012 10:26:19 +0400 Subject: [PATCH 232/365] arm/sa1100: fix sa1100-rtc memory resource DEFINE_RES_MEM() takes the size of resource as a second argument, not the end address. Passing end address leads to following error in runtime during device registration: sa1100-rtc: failed to claim resource 0 Fix it. Signed-off-by: Dmitry Artamonow Signed-off-by: Haojian Zhuang --- arch/arm/mach-sa1100/generic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c index 7c524b4e415d..16be4c56abe3 100644 --- a/arch/arm/mach-sa1100/generic.c +++ b/arch/arm/mach-sa1100/generic.c @@ -306,7 +306,7 @@ void sa11x0_register_irda(struct irda_platform_data *irda) } static struct resource sa1100_rtc_resources[] = { - DEFINE_RES_MEM(0x90010000, 0x9001003f), + DEFINE_RES_MEM(0x90010000, 0x40), DEFINE_RES_IRQ_NAMED(IRQ_RTC1Hz, "rtc 1Hz"), DEFINE_RES_IRQ_NAMED(IRQ_RTCAlrm, "rtc alarm"), }; From a13b878780ea98d8415203c4502a8fc5bc614656 Mon Sep 17 00:00:00 2001 From: Igor Grinberg Date: Thu, 12 Apr 2012 15:43:28 +0300 Subject: [PATCH 233/365] ARM: PXA2xx: MFP: fix bug with MFP_LPM_KEEP_OUTPUT Pins that have MFP_LPM_KEEP_OUTPUT set and are configured for output must retain the output state in low power mode. Currently, the pin direction configuration is overrided with values in gpdr_lpm[] array and do not obey the MFP_LPM_KEEP_OUTPUT setting. Fix the above bug and add some documentation to clarify the MFP_LPM_KEEP_OUTPUT setting purpose. Reported-by: Paul Parsons Signed-off-by: Igor Grinberg Tested-by: Paul Parsons Signed-off-by: Haojian Zhuang --- arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h | 7 +++++++ arch/arm/mach-pxa/mfp-pxa2xx.c | 14 +++++++++++--- 2 files changed, 18 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h b/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h index c54cef25895c..cbf51ae81855 100644 --- a/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h +++ b/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h @@ -17,6 +17,7 @@ * * bit 23 - Input/Output (PXA2xx specific) * bit 24 - Wakeup Enable(PXA2xx specific) + * bit 25 - Keep Output (PXA2xx specific) */ #define MFP_DIR_IN (0x0 << 23) @@ -25,6 +26,12 @@ #define MFP_DIR(x) (((x) >> 23) & 0x1) #define MFP_LPM_CAN_WAKEUP (0x1 << 24) + +/* + * MFP_LPM_KEEP_OUTPUT must be specified for pins that need to + * retain their last output level (low or high). + * Note: MFP_LPM_KEEP_OUTPUT has no effect on pins configured for input. + */ #define MFP_LPM_KEEP_OUTPUT (0x1 << 25) #define WAKEUP_ON_EDGE_RISE (MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_RISE) diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c index b0a842887780..d2373d79b657 100644 --- a/arch/arm/mach-pxa/mfp-pxa2xx.c +++ b/arch/arm/mach-pxa/mfp-pxa2xx.c @@ -366,14 +366,22 @@ static int pxa2xx_mfp_suspend(void) } for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++) { - saved_gafr[0][i] = GAFR_L(i); saved_gafr[1][i] = GAFR_U(i); saved_gpdr[i] = GPDR(i * 32); saved_pgsr[i] = PGSR(i); - - GPDR(i * 32) = gpdr_lpm[i]; } + + /* set GPDR bits taking into account MFP_LPM_KEEP_OUTPUT */ + for (i = 0; i < pxa_last_gpio; i++) { + if ((gpdr_lpm[gpio_to_bank(i)] & GPIO_bit(i)) || + ((gpio_desc[i].config & MFP_LPM_KEEP_OUTPUT) && + (saved_gpdr[gpio_to_bank(i)] & GPIO_bit(i)))) + GPDR(i) |= GPIO_bit(i); + else + GPDR(i) &= ~GPIO_bit(i); + } + return 0; } From ef7c7c693b4b05a293678fd40ed1511bc94d6f61 Mon Sep 17 00:00:00 2001 From: Igor Grinberg Date: Thu, 12 Apr 2012 15:43:29 +0300 Subject: [PATCH 234/365] ARM: PXA2xx: MFP: fix potential direction bug Pins configured as input and have MFP_LPM_DRIVE_* flag set, can have a wrong output value for some period of time (spike) during the suspend sequence. This can happen because the direction of the pins (GPDR) is set by software and the output level is set by hardware (PGSR) at a later stage. Fix the above potential bug by setting the output levels first. Also save the actual levels of the pins before the suspend and restore them after the resume, but before the direction settings take place, so the same bug as described above will not happen in the resume sequence. Reported-by: Paul Parsons Signed-off-by: Igor Grinberg Tested-by: Paul Parsons Signed-off-by: Haojian Zhuang --- arch/arm/mach-pxa/mfp-pxa2xx.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c index d2373d79b657..ef0426a159d4 100644 --- a/arch/arm/mach-pxa/mfp-pxa2xx.c +++ b/arch/arm/mach-pxa/mfp-pxa2xx.c @@ -33,6 +33,8 @@ #define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2)) #define GPLR(x) __REG2(0x40E00000, BANK_OFF((x) >> 5)) #define GPDR(x) __REG2(0x40E00000, BANK_OFF((x) >> 5) + 0x0c) +#define GPSR(x) __REG2(0x40E00000, BANK_OFF((x) >> 5) + 0x18) +#define GPCR(x) __REG2(0x40E00000, BANK_OFF((x) >> 5) + 0x24) #define PWER_WE35 (1 << 24) @@ -348,6 +350,7 @@ static inline void pxa27x_mfp_init(void) {} #ifdef CONFIG_PM static unsigned long saved_gafr[2][4]; static unsigned long saved_gpdr[4]; +static unsigned long saved_gplr[4]; static unsigned long saved_pgsr[4]; static int pxa2xx_mfp_suspend(void) @@ -369,7 +372,11 @@ static int pxa2xx_mfp_suspend(void) saved_gafr[0][i] = GAFR_L(i); saved_gafr[1][i] = GAFR_U(i); saved_gpdr[i] = GPDR(i * 32); + saved_gplr[i] = GPLR(i * 32); saved_pgsr[i] = PGSR(i); + + GPSR(i * 32) = PGSR(i); + GPCR(i * 32) = ~PGSR(i); } /* set GPDR bits taking into account MFP_LPM_KEEP_OUTPUT */ @@ -392,6 +399,8 @@ static void pxa2xx_mfp_resume(void) for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++) { GAFR_L(i) = saved_gafr[0][i]; GAFR_U(i) = saved_gafr[1][i]; + GPSR(i * 32) = saved_gplr[i]; + GPCR(i * 32) = ~saved_gplr[i]; GPDR(i * 32) = saved_gpdr[i]; PGSR(i) = saved_pgsr[i]; } From df391c0df49560c7fceffbad5b9d083836d9f22f Mon Sep 17 00:00:00 2001 From: Ilija Hadzic Date: Thu, 19 Apr 2012 12:22:20 -0400 Subject: [PATCH 235/365] drm/radeon: add a missing entry to encoder_names An entry for INTERNAL_VCE encoder was missing. Add it. Signed-off-by: Ilija Hadzic Reviewed-by: Alex Deucher Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/radeon_display.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index 8086c96e0b06..0a1d4bd65edc 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -533,7 +533,7 @@ static void radeon_crtc_init(struct drm_device *dev, int index) radeon_legacy_init_crtc(dev, radeon_crtc); } -static const char *encoder_names[36] = { +static const char *encoder_names[37] = { "NONE", "INTERNAL_LVDS", "INTERNAL_TMDS1", @@ -570,6 +570,7 @@ static const char *encoder_names[36] = { "INTERNAL_UNIPHY2", "NUTMEG", "TRAVIS", + "INTERNAL_VCE" }; static const char *connector_names[15] = { From 37d4174d2d252c37dcb3d88cafae488542087848 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 19 Apr 2012 10:48:38 -0400 Subject: [PATCH 236/365] drm/radeon/kms: use frac fb div on APUs Seems to be more stable on certain monitors. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=48880 Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atombios_crtc.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index b5ff1f7b6f7e..c5c31e091a92 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -575,6 +575,9 @@ static u32 atombios_adjust_pll(struct drm_crtc *crtc, if (rdev->family < CHIP_RV770) pll->flags |= RADEON_PLL_PREFER_MINM_OVER_MAXP; + /* use frac fb div on APUs */ + if (ASIC_IS_DCE41(rdev) || ASIC_IS_DCE61(rdev)) + pll->flags |= RADEON_PLL_USE_FRAC_FB_DIV; } else { pll->flags |= RADEON_PLL_LEGACY; From 83a787a71e034244a9fd1d5988fe18f226341417 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Fri, 27 Apr 2012 11:02:15 +0300 Subject: [PATCH 237/365] usb: gadget: udc-core: fix wrong call order commit 6d258a4 (usb: gadget: udc-core: stop UDC on device-initiated disconnect) introduced another case of asymmetric calls when issuing a device-initiated disconnect. Fix it. Reported-by: Ben Hutchings Signed-off-by: Felipe Balbi --- drivers/usb/gadget/udc-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/gadget/udc-core.c b/drivers/usb/gadget/udc-core.c index 2fa9865babed..df1bd87232dd 100644 --- a/drivers/usb/gadget/udc-core.c +++ b/drivers/usb/gadget/udc-core.c @@ -415,9 +415,9 @@ static ssize_t usb_udc_softconn_store(struct device *dev, usb_gadget_udc_start(udc->gadget, udc->driver); usb_gadget_connect(udc->gadget); } else if (sysfs_streq(buf, "disconnect")) { + usb_gadget_disconnect(udc->gadget); if (udc_is_newstyle(udc)) usb_gadget_udc_stop(udc->gadget, udc->driver); - usb_gadget_disconnect(udc->gadget); } else { dev_err(dev, "unsupported command '%s'\n", buf); return -EINVAL; From 320cd1e750f1bf3e47eb41209dcb2be07264cb76 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 26 Apr 2012 11:31:57 -0400 Subject: [PATCH 238/365] usb: gadget: udc-core: fix incompatibility with dummy-hcd This patch (as1548) fixes a recently-introduced incompatibility between the UDC core and the dummy-hcd driver. Commit 8ae8090c82eb407267001f75b3d256b3bd4ae691 (usb: gadget: udc-core: fix asymmetric calls in remove_driver) moved the usb_gadget_udc_stop() call in usb_gadget_remove_driver() below the usb_gadget_disconnect() call. As a result, usb_gadget_disconnect() gets called at a time when the gadget driver believes it has been unbound but dummy-hcd believes it has not. A nasty error ensues when dummy-hcd calls the gadget driver's disconnect method a second time. To fix the problem, this patch moves the gadget driver's unbind notification after the usb_gadget_disconnect() call. Now nothing happens between the two unbind notifications, so nothing goes wrong. Signed-off-by: Alan Stern Tested-by: Alexander Shishkin Signed-off-by: Felipe Balbi --- drivers/usb/gadget/udc-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/gadget/udc-core.c b/drivers/usb/gadget/udc-core.c index df1bd87232dd..e5e44f8cde9a 100644 --- a/drivers/usb/gadget/udc-core.c +++ b/drivers/usb/gadget/udc-core.c @@ -263,8 +263,8 @@ static void usb_gadget_remove_driver(struct usb_udc *udc) if (udc_is_newstyle(udc)) { udc->driver->disconnect(udc->gadget); - udc->driver->unbind(udc->gadget); usb_gadget_disconnect(udc->gadget); + udc->driver->unbind(udc->gadget); usb_gadget_udc_stop(udc->gadget, udc->driver); } else { usb_gadget_stop(udc->gadget, udc->driver); From 1e4f0b82577e59f23484c99056c96465e202fdd5 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Wed, 25 Apr 2012 13:39:38 +0200 Subject: [PATCH 239/365] i2c: mxs: disable QUEUE when sending is done Since the last fixes to this driver ensure now the queue termination is done correctly, we can finally disable the queue after a transfer without problems. The gain is that it will only be reenabled after the next transfer is fully set up. Before, the queue was running all the time and if the setup of the next message was interrupted by another thread, an incomplete buffer could have been sent, padded with zeroes. Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-mxs.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c index 4c37347973e6..76b8af44f634 100644 --- a/drivers/i2c/busses/i2c-mxs.c +++ b/drivers/i2c/busses/i2c-mxs.c @@ -253,6 +253,9 @@ static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, if (i2c->cmd_err == -ENXIO) mxs_i2c_reset(i2c); + else + writel(MXS_I2C_QUEUECTRL_QUEUE_RUN, + i2c->regs + MXS_I2C_QUEUECTRL_CLR); dev_dbg(i2c->dev, "Done with err=%d\n", i2c->cmd_err); @@ -383,8 +386,6 @@ static int __devexit mxs_i2c_remove(struct platform_device *pdev) if (ret) return -EBUSY; - writel(MXS_I2C_QUEUECTRL_QUEUE_RUN, - i2c->regs + MXS_I2C_QUEUECTRL_CLR); writel(MXS_I2C_CTRL0_SFTRST, i2c->regs + MXS_I2C_CTRL0_SET); platform_set_drvdata(pdev, NULL); From de14ca6ae2c592d66db88f1e5596b26f7f011384 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Wed, 14 Mar 2012 10:28:35 +0100 Subject: [PATCH 240/365] MIPS: ath79: fix AR933X WMAC reset code The current code puts the built-in WMAC device of the AR933X SoCs into reset instead of starting it. This causes a hard lock on AR933X based boards when the wireless driver tries to access the device. Signed-off-by: Gabor Juhos Cc: stable@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3484/ Signed-off-by: Ralf Baechle --- arch/mips/ath79/dev-wmac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/ath79/dev-wmac.c b/arch/mips/ath79/dev-wmac.c index e21507052066..9c717bf98ffe 100644 --- a/arch/mips/ath79/dev-wmac.c +++ b/arch/mips/ath79/dev-wmac.c @@ -58,8 +58,8 @@ static void __init ar913x_wmac_setup(void) static int ar933x_wmac_reset(void) { - ath79_device_reset_clear(AR933X_RESET_WMAC); ath79_device_reset_set(AR933X_RESET_WMAC); + ath79_device_reset_clear(AR933X_RESET_WMAC); return 0; } From dc5efaa049cbb10efaf47fe977d45ea1e38b4465 Mon Sep 17 00:00:00 2001 From: David Daney Date: Wed, 28 Mar 2012 15:59:58 -0700 Subject: [PATCH 241/365] MIPS: Remove get_current_pgd(). It is unused in the tree. Signed-off-by: David Daney Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3557/ Signed-off-by: Ralf Baechle --- arch/mips/include/asm/mmu_context.h | 6 ------ 1 file changed, 6 deletions(-) diff --git a/arch/mips/include/asm/mmu_context.h b/arch/mips/include/asm/mmu_context.h index 73c0d45798de..9b02cfba7449 100644 --- a/arch/mips/include/asm/mmu_context.h +++ b/arch/mips/include/asm/mmu_context.h @@ -37,12 +37,6 @@ extern void tlbmiss_handler_setup_pgd(unsigned long pgd); write_c0_xcontext((unsigned long) smp_processor_id() << 51); \ } while (0) - -static inline unsigned long get_current_pgd(void) -{ - return PHYS_TO_XKSEG_CACHED((read_c0_context() >> 11) & ~0xfffUL); -} - #else /* CONFIG_MIPS_PGD_C0_CONTEXT: using pgd_current*/ /* From 651913ce9de2bbcedef608c5d6cf39c244248509 Mon Sep 17 00:00:00 2001 From: Neal Cardwell Date: Fri, 27 Apr 2012 11:29:37 -0400 Subject: [PATCH 242/365] tcp: clean up use of jiffies in tcp_rcv_rtt_measure() Clean up a reference to jiffies in tcp_rcv_rtt_measure() that should instead reference tcp_time_stamp. Since the result of the subtraction is passed into a function taking u32, this should not change any behavior (and indeed the generated assembly does not change on x86_64). However, it seems worth cleaning this up for consistency and clarity (and perhaps to avoid bugs if this is copied and pasted somewhere else). Signed-off-by: Neal Cardwell Signed-off-by: David S. Miller --- net/ipv4/tcp_input.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 3ff364065376..2a702e3a4ae6 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -495,7 +495,7 @@ static inline void tcp_rcv_rtt_measure(struct tcp_sock *tp) goto new_measure; if (before(tp->rcv_nxt, tp->rcv_rtt_est.seq)) return; - tcp_rcv_rtt_update(tp, jiffies - tp->rcv_rtt_est.time, 1); + tcp_rcv_rtt_update(tp, tcp_time_stamp - tp->rcv_rtt_est.time, 1); new_measure: tp->rcv_rtt_est.seq = tp->rcv_nxt + tp->rcv_wnd; From 5eb806a3a68920a9f373f18b03fa14852047e62b Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 19 Apr 2012 14:44:21 +0530 Subject: [PATCH 243/365] spi/pl022: Fix calculate_effective_freq() calculate_effective_freq() was still not optimized and there were cases when it returned without error and with values of cpsr and scr as zero. Also, the variable named found is not used well. This patch targets to optimize and correct this routine. Tested for SPEAr. Signed-off-by: Viresh Kumar Tested-by: Vinit Kamalaksha Shenoy Acked-by: Linus Walleij Signed-off-by: Grant Likely --- drivers/spi/spi-pl022.c | 23 +++++++++++++++++------ 1 file changed, 17 insertions(+), 6 deletions(-) diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c index 1ead49dbebce..8aa44e7adaef 100644 --- a/drivers/spi/spi-pl022.c +++ b/drivers/spi/spi-pl022.c @@ -1681,26 +1681,37 @@ static int calculate_effective_freq(struct pl022 *pl022, int freq, struct while (scr <= SCR_MAX) { tmp = spi_rate(rate, cpsdvsr, scr); - if (tmp > freq) + if (tmp > freq) { + /* we need lower freq */ scr++; + continue; + } + /* - * If found exact value, update and break. - * If found more closer value, update and continue. + * If found exact value, mark found and break. + * If found more closer value, update and break. */ - else if ((tmp == freq) || (tmp > best_freq)) { + if (tmp > best_freq) { best_freq = tmp; best_cpsdvsr = cpsdvsr; best_scr = scr; if (tmp == freq) - break; + found = 1; } - scr++; + /* + * increased scr will give lower rates, which are not + * required + */ + break; } cpsdvsr += 2; scr = SCR_MIN; } + WARN(!best_freq, "pl022: Matching cpsdvsr and scr not found for %d Hz rate \n", + freq); + clk_freq->cpsdvsr = (u8) (best_cpsdvsr & 0xFF); clk_freq->scr = (u8) (best_scr & 0xFF); dev_dbg(&pl022->adev->dev, From dbabe0d659d3cfe42830a779909ab3cd42f7b027 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 17 Apr 2012 17:03:50 -0700 Subject: [PATCH 244/365] spi: fix spi.h kernel-doc warning Fix kernel-doc warning in spi.h (copy/paste): Warning(include/linux/spi/spi.h:365): No description found for parameter 'unprepare_transfer_hardware' Signed-off-by: Randy Dunlap Signed-off-by: Grant Likely --- include/linux/spi/spi.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index 98679b061b63..fa702aeb5038 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -254,7 +254,7 @@ static inline void spi_unregister_driver(struct spi_driver *sdrv) * driver is finished with this message, it must call * spi_finalize_current_message() so the subsystem can issue the next * transfer - * @prepare_transfer_hardware: there are currently no more messages on the + * @unprepare_transfer_hardware: there are currently no more messages on the * queue so the subsystem notifies the driver that it may relax the * hardware by issuing this call * From d4b9b578cba7231c1fbafbe901a2e8f38654e056 Mon Sep 17 00:00:00 2001 From: H Hartley Sweeten Date: Tue, 17 Apr 2012 18:46:36 -0700 Subject: [PATCH 245/365] spi/spi-ep93xx.c: use dma_transfer_direction instead of dma_data_direction A new enum indicating the dma channel direction was introduced by: commit 49920bc66984a512f4bcc7735a61642cd0e4d6f2 dmaengine: add new enum dma_transfer_direction The following commit changed spi-ep93xx to use the new enum: commit a485df4b4404379786c4bdd258bc528b2617449d spi, serial: move to dma_transfer_direction In doing so a sparse warning was introduced: warning: mixing different enum types int enum dma_data_direction versus int enum dma_transfer_direction This is produced because the 'dir' passed in ep93xx_spi_dma_prepare is an enum dma_data_direction and is being used to set the dma_slave_config 'direction' which is now an enum dma_transfer_direction. Fix this by converting spi-ep93xx to use the new enum type in all places. Signed-off-by: H Hartley Sweeten Acked-by: Mika Westerberg Acked-by: Vinod Koul Signed-off-by: Grant Likely --- drivers/spi/spi-ep93xx.c | 24 ++++++++++-------------- 1 file changed, 10 insertions(+), 14 deletions(-) diff --git a/drivers/spi/spi-ep93xx.c b/drivers/spi/spi-ep93xx.c index 6db2887852d6..e8055073e84d 100644 --- a/drivers/spi/spi-ep93xx.c +++ b/drivers/spi/spi-ep93xx.c @@ -545,13 +545,12 @@ static void ep93xx_spi_pio_transfer(struct ep93xx_spi *espi) * in case of failure. */ static struct dma_async_tx_descriptor * -ep93xx_spi_dma_prepare(struct ep93xx_spi *espi, enum dma_data_direction dir) +ep93xx_spi_dma_prepare(struct ep93xx_spi *espi, enum dma_transfer_direction dir) { struct spi_transfer *t = espi->current_msg->state; struct dma_async_tx_descriptor *txd; enum dma_slave_buswidth buswidth; struct dma_slave_config conf; - enum dma_transfer_direction slave_dirn; struct scatterlist *sg; struct sg_table *sgt; struct dma_chan *chan; @@ -567,14 +566,13 @@ ep93xx_spi_dma_prepare(struct ep93xx_spi *espi, enum dma_data_direction dir) memset(&conf, 0, sizeof(conf)); conf.direction = dir; - if (dir == DMA_FROM_DEVICE) { + if (dir == DMA_DEV_TO_MEM) { chan = espi->dma_rx; buf = t->rx_buf; sgt = &espi->rx_sgt; conf.src_addr = espi->sspdr_phys; conf.src_addr_width = buswidth; - slave_dirn = DMA_DEV_TO_MEM; } else { chan = espi->dma_tx; buf = t->tx_buf; @@ -582,7 +580,6 @@ ep93xx_spi_dma_prepare(struct ep93xx_spi *espi, enum dma_data_direction dir) conf.dst_addr = espi->sspdr_phys; conf.dst_addr_width = buswidth; - slave_dirn = DMA_MEM_TO_DEV; } ret = dmaengine_slave_config(chan, &conf); @@ -633,8 +630,7 @@ ep93xx_spi_dma_prepare(struct ep93xx_spi *espi, enum dma_data_direction dir) if (!nents) return ERR_PTR(-ENOMEM); - txd = dmaengine_prep_slave_sg(chan, sgt->sgl, nents, - slave_dirn, DMA_CTRL_ACK); + txd = dmaengine_prep_slave_sg(chan, sgt->sgl, nents, dir, DMA_CTRL_ACK); if (!txd) { dma_unmap_sg(chan->device->dev, sgt->sgl, sgt->nents, dir); return ERR_PTR(-ENOMEM); @@ -651,12 +647,12 @@ ep93xx_spi_dma_prepare(struct ep93xx_spi *espi, enum dma_data_direction dir) * unmapped. */ static void ep93xx_spi_dma_finish(struct ep93xx_spi *espi, - enum dma_data_direction dir) + enum dma_transfer_direction dir) { struct dma_chan *chan; struct sg_table *sgt; - if (dir == DMA_FROM_DEVICE) { + if (dir == DMA_DEV_TO_MEM) { chan = espi->dma_rx; sgt = &espi->rx_sgt; } else { @@ -677,16 +673,16 @@ static void ep93xx_spi_dma_transfer(struct ep93xx_spi *espi) struct spi_message *msg = espi->current_msg; struct dma_async_tx_descriptor *rxd, *txd; - rxd = ep93xx_spi_dma_prepare(espi, DMA_FROM_DEVICE); + rxd = ep93xx_spi_dma_prepare(espi, DMA_DEV_TO_MEM); if (IS_ERR(rxd)) { dev_err(&espi->pdev->dev, "DMA RX failed: %ld\n", PTR_ERR(rxd)); msg->status = PTR_ERR(rxd); return; } - txd = ep93xx_spi_dma_prepare(espi, DMA_TO_DEVICE); + txd = ep93xx_spi_dma_prepare(espi, DMA_MEM_TO_DEV); if (IS_ERR(txd)) { - ep93xx_spi_dma_finish(espi, DMA_FROM_DEVICE); + ep93xx_spi_dma_finish(espi, DMA_DEV_TO_MEM); dev_err(&espi->pdev->dev, "DMA TX failed: %ld\n", PTR_ERR(rxd)); msg->status = PTR_ERR(txd); return; @@ -705,8 +701,8 @@ static void ep93xx_spi_dma_transfer(struct ep93xx_spi *espi) wait_for_completion(&espi->wait); - ep93xx_spi_dma_finish(espi, DMA_TO_DEVICE); - ep93xx_spi_dma_finish(espi, DMA_FROM_DEVICE); + ep93xx_spi_dma_finish(espi, DMA_MEM_TO_DEV); + ep93xx_spi_dma_finish(espi, DMA_DEV_TO_MEM); } /** From 5a00689930ab975fdd1b37b034475017e460cf2a Mon Sep 17 00:00:00 2001 From: Sachin Prabhu Date: Tue, 17 Apr 2012 14:35:39 +0100 Subject: [PATCH 246/365] Avoid reading past buffer when calling GETACL Bug noticed in commit bf118a342f10dafe44b14451a1392c3254629a1f When calling GETACL, if the size of the bitmap array, the length attribute and the acl returned by the server is greater than the allocated buffer(args.acl_len), we can Oops with a General Protection fault at _copy_from_pages() when we attempt to read past the pages allocated. This patch allocates an extra PAGE for the bitmap and checks to see that the bitmap + attribute_length + ACLs don't exceed the buffer space allocated to it. Signed-off-by: Sachin Prabhu Reported-by: Jian Li [Trond: Fixed a size_t vs unsigned int printk() warning] Signed-off-by: Trond Myklebust --- fs/nfs/nfs4proc.c | 16 ++++++++++------ fs/nfs/nfs4xdr.c | 18 +++++++++++------- 2 files changed, 21 insertions(+), 13 deletions(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 60d5f4c26dda..f5f125fdae1b 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -3684,19 +3684,23 @@ static ssize_t __nfs4_get_acl_uncached(struct inode *inode, void *buf, size_t bu if (npages == 0) npages = 1; + /* Add an extra page to handle the bitmap returned */ + npages++; + for (i = 0; i < npages; i++) { pages[i] = alloc_page(GFP_KERNEL); if (!pages[i]) goto out_free; } - if (npages > 1) { - /* for decoding across pages */ - res.acl_scratch = alloc_page(GFP_KERNEL); - if (!res.acl_scratch) - goto out_free; - } + + /* for decoding across pages */ + res.acl_scratch = alloc_page(GFP_KERNEL); + if (!res.acl_scratch) + goto out_free; + args.acl_len = npages * PAGE_SIZE; args.acl_pgbase = 0; + /* Let decode_getfacl know not to fail if the ACL data is larger than * the page we send as a guess */ if (buf == NULL) diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c index 77fc5f959c4e..9312dd78d349 100644 --- a/fs/nfs/nfs4xdr.c +++ b/fs/nfs/nfs4xdr.c @@ -4902,11 +4902,19 @@ static int decode_getacl(struct xdr_stream *xdr, struct rpc_rqst *req, bitmap[3] = {0}; struct kvec *iov = req->rq_rcv_buf.head; int status; + size_t page_len = xdr->buf->page_len; res->acl_len = 0; if ((status = decode_op_hdr(xdr, OP_GETATTR)) != 0) goto out; + bm_p = xdr->p; + res->acl_data_offset = be32_to_cpup(bm_p) + 2; + res->acl_data_offset <<= 2; + /* Check if the acl data starts beyond the allocated buffer */ + if (res->acl_data_offset > page_len) + return -ERANGE; + if ((status = decode_attr_bitmap(xdr, bitmap)) != 0) goto out; if ((status = decode_attr_length(xdr, &attrlen, &savep)) != 0) @@ -4916,28 +4924,24 @@ static int decode_getacl(struct xdr_stream *xdr, struct rpc_rqst *req, return -EIO; if (likely(bitmap[0] & FATTR4_WORD0_ACL)) { size_t hdrlen; - u32 recvd; /* The bitmap (xdr len + bitmaps) and the attr xdr len words * are stored with the acl data to handle the problem of * variable length bitmaps.*/ xdr->p = bm_p; - res->acl_data_offset = be32_to_cpup(bm_p) + 2; - res->acl_data_offset <<= 2; /* We ignore &savep and don't do consistency checks on * the attr length. Let userspace figure it out.... */ hdrlen = (u8 *)xdr->p - (u8 *)iov->iov_base; attrlen += res->acl_data_offset; - recvd = req->rq_rcv_buf.len - hdrlen; - if (attrlen > recvd) { + if (attrlen > page_len) { if (res->acl_flags & NFS4_ACL_LEN_REQUEST) { /* getxattr interface called with a NULL buf */ res->acl_len = attrlen; goto out; } - dprintk("NFS: acl reply: attrlen %u > recvd %u\n", - attrlen, recvd); + dprintk("NFS: acl reply: attrlen %zu > page_len %u\n", + attrlen, page_len); return -EINVAL; } xdr_read_pages(xdr, attrlen); From cde4384e1037c15e5dd04c68d19c75798b6281dd Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Fri, 20 Apr 2012 15:37:33 +0200 Subject: [PATCH 247/365] spi/bcm63xx: convert to the pump message infrastructure This patch converts the bcm63xx SPI driver to use the SPI infrastructure pump message queue. Since we were previously sleeping in the SPI driver's transfer() function (which is not allowed) this is now fixed as well. To complete that conversion a certain number of changes have been made: - the transfer len is split into multiple hardware transfers in case its size is bigger than the hardware FIFO size - the FIFO refill is no longer done in the interrupt context, which was a bad idea leading to quick interrupt handler re-entrancy Tested-by: Tanguy Bouzeloc Signed-off-by: Florian Fainelli Signed-off-by: Grant Likely --- drivers/spi/spi-bcm63xx.c | 151 +++++++++++++++++++++++--------------- 1 file changed, 90 insertions(+), 61 deletions(-) diff --git a/drivers/spi/spi-bcm63xx.c b/drivers/spi/spi-bcm63xx.c index f01b2648452e..63b0028a8bd3 100644 --- a/drivers/spi/spi-bcm63xx.c +++ b/drivers/spi/spi-bcm63xx.c @@ -1,7 +1,7 @@ /* * Broadcom BCM63xx SPI controller support * - * Copyright (C) 2009-2011 Florian Fainelli + * Copyright (C) 2009-2012 Florian Fainelli * Copyright (C) 2010 Tanguy Bouzeloc * * This program is free software; you can redistribute it and/or @@ -30,6 +30,8 @@ #include #include #include +#include +#include #include @@ -96,17 +98,12 @@ static const unsigned bcm63xx_spi_freq_table[SPI_CLK_MASK][2] = { { 391000, SPI_CLK_0_391MHZ } }; -static int bcm63xx_spi_setup_transfer(struct spi_device *spi, - struct spi_transfer *t) +static int bcm63xx_spi_check_transfer(struct spi_device *spi, + struct spi_transfer *t) { - struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master); u8 bits_per_word; - u8 clk_cfg, reg; - u32 hz; - int i; bits_per_word = (t) ? t->bits_per_word : spi->bits_per_word; - hz = (t) ? t->speed_hz : spi->max_speed_hz; if (bits_per_word != 8) { dev_err(&spi->dev, "%s, unsupported bits_per_word=%d\n", __func__, bits_per_word); @@ -119,6 +116,19 @@ static int bcm63xx_spi_setup_transfer(struct spi_device *spi, return -EINVAL; } + return 0; +} + +static void bcm63xx_spi_setup_transfer(struct spi_device *spi, + struct spi_transfer *t) +{ + struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master); + u32 hz; + u8 clk_cfg, reg; + int i; + + hz = (t) ? t->speed_hz : spi->max_speed_hz; + /* Find the closest clock configuration */ for (i = 0; i < SPI_CLK_MASK; i++) { if (hz <= bcm63xx_spi_freq_table[i][0]) { @@ -139,8 +149,6 @@ static int bcm63xx_spi_setup_transfer(struct spi_device *spi, bcm_spi_writeb(bs, reg, SPI_CLK_CFG); dev_dbg(&spi->dev, "Setting clock register to %02x (hz %d)\n", clk_cfg, hz); - - return 0; } /* the spi->mode bits understood by this driver: */ @@ -165,7 +173,7 @@ static int bcm63xx_spi_setup(struct spi_device *spi) return -EINVAL; } - ret = bcm63xx_spi_setup_transfer(spi, NULL); + ret = bcm63xx_spi_check_transfer(spi, NULL); if (ret < 0) { dev_err(&spi->dev, "setup: unsupported mode bits %x\n", spi->mode & ~MODEBITS); @@ -190,28 +198,29 @@ static void bcm63xx_spi_fill_tx_fifo(struct bcm63xx_spi *bs) bs->remaining_bytes -= size; } -static int bcm63xx_txrx_bufs(struct spi_device *spi, struct spi_transfer *t) +static unsigned int bcm63xx_txrx_bufs(struct spi_device *spi, + struct spi_transfer *t) { struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master); u16 msg_ctl; u16 cmd; + /* Disable the CMD_DONE interrupt */ + bcm_spi_writeb(bs, 0, SPI_INT_MASK); + dev_dbg(&spi->dev, "txrx: tx %p, rx %p, len %d\n", t->tx_buf, t->rx_buf, t->len); /* Transmitter is inhibited */ bs->tx_ptr = t->tx_buf; bs->rx_ptr = t->rx_buf; - init_completion(&bs->done); if (t->tx_buf) { bs->remaining_bytes = t->len; bcm63xx_spi_fill_tx_fifo(bs); } - /* Enable the command done interrupt which - * we use to determine completion of a command */ - bcm_spi_writeb(bs, SPI_INTR_CMD_DONE, SPI_INT_MASK); + init_completion(&bs->done); /* Fill in the Message control register */ msg_ctl = (t->len << SPI_BYTE_CNT_SHIFT); @@ -230,33 +239,76 @@ static int bcm63xx_txrx_bufs(struct spi_device *spi, struct spi_transfer *t) cmd |= (0 << SPI_CMD_PREPEND_BYTE_CNT_SHIFT); cmd |= (spi->chip_select << SPI_CMD_DEVICE_ID_SHIFT); bcm_spi_writew(bs, cmd, SPI_CMD); - wait_for_completion(&bs->done); - /* Disable the CMD_DONE interrupt */ - bcm_spi_writeb(bs, 0, SPI_INT_MASK); + /* Enable the CMD_DONE interrupt */ + bcm_spi_writeb(bs, SPI_INTR_CMD_DONE, SPI_INT_MASK); return t->len - bs->remaining_bytes; } -static int bcm63xx_transfer(struct spi_device *spi, struct spi_message *m) +static int bcm63xx_spi_prepare_transfer(struct spi_master *master) { - struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master); + struct bcm63xx_spi *bs = spi_master_get_devdata(master); + + pm_runtime_get_sync(&bs->pdev->dev); + + return 0; +} + +static int bcm63xx_spi_unprepare_transfer(struct spi_master *master) +{ + struct bcm63xx_spi *bs = spi_master_get_devdata(master); + + pm_runtime_put(&bs->pdev->dev); + + return 0; +} + +static int bcm63xx_spi_transfer_one(struct spi_master *master, + struct spi_message *m) +{ + struct bcm63xx_spi *bs = spi_master_get_devdata(master); struct spi_transfer *t; - int ret = 0; - - if (unlikely(list_empty(&m->transfers))) - return -EINVAL; - - if (bs->stopping) - return -ESHUTDOWN; + struct spi_device *spi = m->spi; + int status = 0; + unsigned int timeout = 0; list_for_each_entry(t, &m->transfers, transfer_list) { - ret += bcm63xx_txrx_bufs(spi, t); + unsigned int len = t->len; + u8 rx_tail; + + status = bcm63xx_spi_check_transfer(spi, t); + if (status < 0) + goto exit; + + /* configure adapter for a new transfer */ + bcm63xx_spi_setup_transfer(spi, t); + + while (len) { + /* send the data */ + len -= bcm63xx_txrx_bufs(spi, t); + + timeout = wait_for_completion_timeout(&bs->done, HZ); + if (!timeout) { + status = -ETIMEDOUT; + goto exit; + } + + /* read out all data */ + rx_tail = bcm_spi_readb(bs, SPI_RX_TAIL); + + /* Read out all the data */ + if (rx_tail) + memcpy_fromio(bs->rx_ptr, bs->rx_io, rx_tail); + } + + m->actual_length += t->len; } +exit: + m->status = status; + spi_finalize_current_message(master); - m->complete(m->context); - - return ret; + return 0; } /* This driver supports single master mode only. Hence @@ -267,39 +319,15 @@ static irqreturn_t bcm63xx_spi_interrupt(int irq, void *dev_id) struct spi_master *master = (struct spi_master *)dev_id; struct bcm63xx_spi *bs = spi_master_get_devdata(master); u8 intr; - u16 cmd; /* Read interupts and clear them immediately */ intr = bcm_spi_readb(bs, SPI_INT_STATUS); bcm_spi_writeb(bs, SPI_INTR_CLEAR_ALL, SPI_INT_STATUS); bcm_spi_writeb(bs, 0, SPI_INT_MASK); - /* A tansfer completed */ - if (intr & SPI_INTR_CMD_DONE) { - u8 rx_tail; - - rx_tail = bcm_spi_readb(bs, SPI_RX_TAIL); - - /* Read out all the data */ - if (rx_tail) - memcpy_fromio(bs->rx_ptr, bs->rx_io, rx_tail); - - /* See if there is more data to send */ - if (bs->remaining_bytes > 0) { - bcm63xx_spi_fill_tx_fifo(bs); - - /* Start the transfer */ - bcm_spi_writew(bs, SPI_HD_W << SPI_MSG_TYPE_SHIFT, - SPI_MSG_CTL); - cmd = bcm_spi_readw(bs, SPI_CMD); - cmd |= SPI_CMD_START_IMMEDIATE; - cmd |= (0 << SPI_CMD_PREPEND_BYTE_CNT_SHIFT); - bcm_spi_writeb(bs, SPI_INTR_CMD_DONE, SPI_INT_MASK); - bcm_spi_writew(bs, cmd, SPI_CMD); - } else { - complete(&bs->done); - } - } + /* A transfer completed */ + if (intr & SPI_INTR_CMD_DONE) + complete(&bs->done); return IRQ_HANDLED; } @@ -345,7 +373,6 @@ static int __devinit bcm63xx_spi_probe(struct platform_device *pdev) } bs = spi_master_get_devdata(master); - init_completion(&bs->done); platform_set_drvdata(pdev, master); bs->pdev = pdev; @@ -379,7 +406,9 @@ static int __devinit bcm63xx_spi_probe(struct platform_device *pdev) master->bus_num = pdata->bus_num; master->num_chipselect = pdata->num_chipselect; master->setup = bcm63xx_spi_setup; - master->transfer = bcm63xx_transfer; + master->prepare_transfer_hardware = bcm63xx_spi_prepare_transfer; + master->unprepare_transfer_hardware = bcm63xx_spi_unprepare_transfer; + master->transfer_one_message = bcm63xx_spi_transfer_one; bs->speed_hz = pdata->speed_hz; bs->stopping = 0; bs->tx_io = (u8 *)(bs->regs + bcm63xx_spireg(SPI_MSG_DATA)); From 1e41dc0ee2f3807328db95e4f87ff1333245190f Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Fri, 20 Apr 2012 15:37:34 +0200 Subject: [PATCH 248/365] spi/bcm63xx: don't use the stopping state We do not need to use a flag to indicate if the master driver is stopping it is sufficient to perform spi master unregistering in the platform driver's remove function. Signed-off-by: Florian Fainelli Signed-off-by: Grant Likely --- drivers/spi/spi-bcm63xx.c | 13 ++----------- 1 file changed, 2 insertions(+), 11 deletions(-) diff --git a/drivers/spi/spi-bcm63xx.c b/drivers/spi/spi-bcm63xx.c index 63b0028a8bd3..80e5ed34e0d9 100644 --- a/drivers/spi/spi-bcm63xx.c +++ b/drivers/spi/spi-bcm63xx.c @@ -39,8 +39,6 @@ #define DRV_VER "0.1.2" struct bcm63xx_spi { - spinlock_t lock; - int stopping; struct completion done; void __iomem *regs; @@ -161,9 +159,6 @@ static int bcm63xx_spi_setup(struct spi_device *spi) bs = spi_master_get_devdata(spi->master); - if (bs->stopping) - return -ESHUTDOWN; - if (!spi->bits_per_word) spi->bits_per_word = 8; @@ -410,10 +405,8 @@ static int __devinit bcm63xx_spi_probe(struct platform_device *pdev) master->unprepare_transfer_hardware = bcm63xx_spi_unprepare_transfer; master->transfer_one_message = bcm63xx_spi_transfer_one; bs->speed_hz = pdata->speed_hz; - bs->stopping = 0; bs->tx_io = (u8 *)(bs->regs + bcm63xx_spireg(SPI_MSG_DATA)); bs->rx_io = (const u8 *)(bs->regs + bcm63xx_spireg(SPI_RX_DATA)); - spin_lock_init(&bs->lock); /* Initialize hardware */ clk_enable(bs->clk); @@ -447,18 +440,16 @@ static int __devexit bcm63xx_spi_remove(struct platform_device *pdev) struct spi_master *master = platform_get_drvdata(pdev); struct bcm63xx_spi *bs = spi_master_get_devdata(master); + spi_unregister_master(master); + /* reset spi block */ bcm_spi_writeb(bs, 0, SPI_INT_MASK); - spin_lock(&bs->lock); - bs->stopping = 1; /* HW shutdown */ clk_disable(bs->clk); clk_put(bs->clk); - spin_unlock(&bs->lock); platform_set_drvdata(pdev, 0); - spi_unregister_master(master); return 0; } From 88a3a255a510ed193bf0cc35424761c3c9247586 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Fri, 20 Apr 2012 15:37:35 +0200 Subject: [PATCH 249/365] spi/bcm63xx: set master driver mode_bits. We were not properly advertising the MODE bits supported by this driver, fix that. Signed-off-by: Florian Fainelli Signed-off-by: Grant Likely --- drivers/spi/spi-bcm63xx.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/spi/spi-bcm63xx.c b/drivers/spi/spi-bcm63xx.c index 80e5ed34e0d9..7491971139a6 100644 --- a/drivers/spi/spi-bcm63xx.c +++ b/drivers/spi/spi-bcm63xx.c @@ -404,6 +404,7 @@ static int __devinit bcm63xx_spi_probe(struct platform_device *pdev) master->prepare_transfer_hardware = bcm63xx_spi_prepare_transfer; master->unprepare_transfer_hardware = bcm63xx_spi_unprepare_transfer; master->transfer_one_message = bcm63xx_spi_transfer_one; + master->mode_bits = MODEBITS; bs->speed_hz = pdata->speed_hz; bs->tx_io = (u8 *)(bs->regs + bcm63xx_spireg(SPI_MSG_DATA)); bs->rx_io = (const u8 *)(bs->regs + bcm63xx_spireg(SPI_RX_DATA)); From 996d282c7ff470f150a467eb4815b90159d04c47 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Mon, 23 Apr 2012 20:35:03 -0400 Subject: [PATCH 250/365] Btrfs: do not start delalloc inodes during sync btrfs_start_delalloc_inodes will just walk the list of delalloc inodes and start writing them out, but it doesn't splice the list or anything so as long as somebody is doing work on the box you could end up in this section _forever_. So just remove it, it's not needed anyway since sync will start writeback on all inodes anyway, all we need to do is wait for ordered extents and then we can commit the transaction. In my horrible torture test sync goes from taking 4 minutes to about 1.5 minutes. Thanks, Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/super.c | 1 - 1 file changed, 1 deletion(-) diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c index 43aa2dd0bc7d..f267718cbd1a 100644 --- a/fs/btrfs/super.c +++ b/fs/btrfs/super.c @@ -819,7 +819,6 @@ int btrfs_sync_fs(struct super_block *sb, int wait) return 0; } - btrfs_start_delalloc_inodes(root, 0); btrfs_wait_ordered_extents(root, 0, 0); trans = btrfs_start_transaction(root, 0); From 3e74317ad773ba9df36db1fa32848cba41ac4d1a Mon Sep 17 00:00:00 2001 From: Jan Schmidt Date: Fri, 27 Apr 2012 12:41:45 -0400 Subject: [PATCH 251/365] Btrfs: fix repair code for RAID10 btrfs_map_block sets mirror_num, so that the repair code knows eventually which device gave us the read error. For RAID10, mirror_num must be 1 or 2. Before this fix mirror_num was incorrectly related to our stripe index. Signed-off-by: Jan Schmidt Signed-off-by: Chris Mason --- fs/btrfs/volumes.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index 3b984173d25b..1411b99555a4 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -3807,10 +3807,11 @@ static int __btrfs_map_block(struct btrfs_mapping_tree *map_tree, int rw, else if (mirror_num) stripe_index += mirror_num - 1; else { + int old_stripe_index = stripe_index; stripe_index = find_live_mirror(map, stripe_index, map->sub_stripes, stripe_index + current->pid % map->sub_stripes); - mirror_num = stripe_index + 1; + mirror_num = stripe_index - old_stripe_index + 1; } } else { /* From 1daf3540fa77faea2f91d96bcaf07ce48ee827be Mon Sep 17 00:00:00 2001 From: Daniel J Blueman Date: Fri, 27 Apr 2012 12:41:46 -0400 Subject: [PATCH 252/365] Btrfs: Prevent root_list corruption I was seeing root_list corruption on unmount during fs resize in 3.4-rc4; add correct locking to address this. Signed-off-by: Daniel J Blueman Signed-off-by: Chris Mason --- fs/btrfs/relocation.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c index 017281dbb2a7..5a105a086acf 100644 --- a/fs/btrfs/relocation.c +++ b/fs/btrfs/relocation.c @@ -1279,7 +1279,9 @@ static int __update_reloc_root(struct btrfs_root *root, int del) if (rb_node) backref_tree_panic(rb_node, -EEXIST, node->bytenr); } else { + spin_lock(&root->fs_info->trans_lock); list_del_init(&root->root_list); + spin_unlock(&root->fs_info->trans_lock); kfree(node); } return 0; From 1f699d38b6556c393ac80f1c23c2053502a51631 Mon Sep 17 00:00:00 2001 From: Stefan Behrens Date: Fri, 27 Apr 2012 12:41:46 -0400 Subject: [PATCH 253/365] Btrfs: fix block_rsv and space_info lock ordering may_commit_transaction() calls spin_lock(&space_info->lock); spin_lock(&delayed_rsv->lock); and update_global_block_rsv() calls spin_lock(&block_rsv->lock); spin_lock(&sinfo->lock); Lockdep complains about this at run time. Everywhere except in update_global_block_rsv(), the space_info lock is the outer lock, therefore the locking order in update_global_block_rsv() is changed. Signed-off-by: Stefan Behrens Signed-off-by: Chris Mason --- fs/btrfs/extent-tree.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 84497f8eb043..6fc2e6f5aab8 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -4214,8 +4214,8 @@ static void update_global_block_rsv(struct btrfs_fs_info *fs_info) num_bytes = calc_global_metadata_size(fs_info); - spin_lock(&block_rsv->lock); spin_lock(&sinfo->lock); + spin_lock(&block_rsv->lock); block_rsv->size = num_bytes; @@ -4241,8 +4241,8 @@ static void update_global_block_rsv(struct btrfs_fs_info *fs_info) block_rsv->full = 1; } - spin_unlock(&sinfo->lock); spin_unlock(&block_rsv->lock); + spin_unlock(&sinfo->lock); } static void init_global_block_rsv(struct btrfs_fs_info *fs_info) From 7654b72417e10e294563496e25211200f9b8b6d3 Mon Sep 17 00:00:00 2001 From: Daniel J Blueman Date: Fri, 27 Apr 2012 12:41:46 -0400 Subject: [PATCH 254/365] Btrfs: Fix space checking during fs resize Fix out-of-space checking, addressing a warning and potential resource leak when resizing the filesystem down while allocating blocks. Signed-off-by: Daniel J Blueman Reviewed-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/relocation.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c index 5a105a086acf..646ee21bb035 100644 --- a/fs/btrfs/relocation.c +++ b/fs/btrfs/relocation.c @@ -3813,7 +3813,7 @@ restart: ret = btrfs_block_rsv_check(rc->extent_root, rc->block_rsv, 5); if (ret < 0) { - if (ret != -EAGAIN) { + if (ret != -ENOSPC) { err = ret; WARN_ON(1); break; From ea505bc99f77f3f9db02bb965bd59ac5db063f60 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Thu, 19 Apr 2012 11:48:15 +0530 Subject: [PATCH 255/365] spi/pl022: Allow request for higher frequency than maximum possible Currently, if we request for frequency greater than maximum possible, spi driver returns error. For example, if the spi block src frequency is 333/4 MHz, i.e. 83.33.. MHz, maximum frequency programmable would be src/2. Which would come around 41.6... It is difficult to pass frequency in these figures. We normally try to program in round figures, like 42 MHz and it should get programmed to <= requested_frequency, i.e. 41.6... For this to happen, we must not return error even if requested freq is higher than max possible. But should program it to max possible. Reported-by: Vinit Kamalaksha Shenoy Signed-off-by: Viresh Kumar Acked-by: Linus Walleij Signed-off-by: Grant Likely --- drivers/spi/spi-pl022.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c index 8aa44e7adaef..400ae2121a2a 100644 --- a/drivers/spi/spi-pl022.c +++ b/drivers/spi/spi-pl022.c @@ -1667,9 +1667,15 @@ static int calculate_effective_freq(struct pl022 *pl022, int freq, struct /* cpsdvsr = 254 & scr = 255 */ min_tclk = spi_rate(rate, CPSDVR_MAX, SCR_MAX); - if (!((freq <= max_tclk) && (freq >= min_tclk))) { + if (freq > max_tclk) + dev_warn(&pl022->adev->dev, + "Max speed that can be programmed is %d Hz, you requested %d\n", + max_tclk, freq); + + if (freq < min_tclk) { dev_err(&pl022->adev->dev, - "controller data is incorrect: out of range frequency"); + "Requested frequency: %d Hz is less than minimum possible %d Hz\n", + freq, min_tclk); return -EINVAL; } From 5794d21ef4639f0e33440927bb903f9598c21e92 Mon Sep 17 00:00:00 2001 From: Sachin Prabhu Date: Tue, 17 Apr 2012 14:36:40 +0100 Subject: [PATCH 256/365] Avoid beyond bounds copy while caching ACL When attempting to cache ACLs returned from the server, if the bitmap size + the ACL size is greater than a PAGE_SIZE but the ACL size itself is smaller than a PAGE_SIZE, we can read past the buffer page boundary. Signed-off-by: Sachin Prabhu Reported-by: Jian Li Signed-off-by: Trond Myklebust --- fs/nfs/nfs4proc.c | 12 +++++------- fs/nfs/nfs4xdr.c | 2 +- 2 files changed, 6 insertions(+), 8 deletions(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index f5f125fdae1b..2ce069880d6b 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -3628,16 +3628,16 @@ out: return ret; } -static void nfs4_write_cached_acl(struct inode *inode, const char *buf, size_t acl_len) +static void nfs4_write_cached_acl(struct inode *inode, struct page **pages, size_t pgbase, size_t acl_len) { struct nfs4_cached_acl *acl; - if (buf && acl_len <= PAGE_SIZE) { + if (pages && acl_len <= PAGE_SIZE) { acl = kmalloc(sizeof(*acl) + acl_len, GFP_KERNEL); if (acl == NULL) goto out; acl->cached = 1; - memcpy(acl->data, buf, acl_len); + _copy_from_pages(acl->data, pages, pgbase, acl_len); } else { acl = kmalloc(sizeof(*acl), GFP_KERNEL); if (acl == NULL) @@ -3670,7 +3670,6 @@ static ssize_t __nfs4_get_acl_uncached(struct inode *inode, void *buf, size_t bu struct nfs_getaclres res = { .acl_len = buflen, }; - void *resp_buf; struct rpc_message msg = { .rpc_proc = &nfs4_procedures[NFSPROC4_CLNT_GETACL], .rpc_argp = &args, @@ -3705,7 +3704,6 @@ static ssize_t __nfs4_get_acl_uncached(struct inode *inode, void *buf, size_t bu * the page we send as a guess */ if (buf == NULL) res.acl_flags |= NFS4_ACL_LEN_REQUEST; - resp_buf = page_address(pages[0]); dprintk("%s buf %p buflen %zu npages %d args.acl_len %zu\n", __func__, buf, buflen, npages, args.acl_len); @@ -3716,9 +3714,9 @@ static ssize_t __nfs4_get_acl_uncached(struct inode *inode, void *buf, size_t bu acl_len = res.acl_len - res.acl_data_offset; if (acl_len > args.acl_len) - nfs4_write_cached_acl(inode, NULL, acl_len); + nfs4_write_cached_acl(inode, NULL, 0, acl_len); else - nfs4_write_cached_acl(inode, resp_buf + res.acl_data_offset, + nfs4_write_cached_acl(inode, pages, res.acl_data_offset, acl_len); if (buf) { ret = -ERANGE; diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c index 9312dd78d349..203c0967451b 100644 --- a/fs/nfs/nfs4xdr.c +++ b/fs/nfs/nfs4xdr.c @@ -4940,7 +4940,7 @@ static int decode_getacl(struct xdr_stream *xdr, struct rpc_rqst *req, res->acl_len = attrlen; goto out; } - dprintk("NFS: acl reply: attrlen %zu > page_len %u\n", + dprintk("NFS: acl reply: attrlen %u > page_len %zu\n", attrlen, page_len); return -EINVAL; } From a4dff1bc492ee4a2184d384ae8b5bcab5859e150 Mon Sep 17 00:00:00 2001 From: Stanislav Kinsbursky Date: Fri, 20 Apr 2012 18:11:02 +0400 Subject: [PATCH 257/365] SUNRPC: skip dead but not buried clients on PipeFS events These clients can't be safely dereferenced if their counter in 0. Signed-off-by: Stanislav Kinsbursky Signed-off-by: Trond Myklebust --- net/sunrpc/clnt.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c index 67972462a543..d10ebc4310f7 100644 --- a/net/sunrpc/clnt.c +++ b/net/sunrpc/clnt.c @@ -218,7 +218,8 @@ static struct rpc_clnt *rpc_get_client_for_event(struct net *net, int event) if (((event == RPC_PIPEFS_MOUNT) && clnt->cl_dentry) || ((event == RPC_PIPEFS_UMOUNT) && !clnt->cl_dentry)) continue; - atomic_inc(&clnt->cl_count); + if (atomic_inc_not_zero(&clnt->cl_count) == 0) + continue; spin_unlock(&sn->rpc_client_lock); return clnt; } From 7aab449e5a2ebfa9c5116e87e16536bc4195e4de Mon Sep 17 00:00:00 2001 From: Stanislav Kinsbursky Date: Fri, 20 Apr 2012 18:19:18 +0400 Subject: [PATCH 258/365] SUNRPC: skip clients with program without PipeFS entries 1) This is sane. 2) Otherwise there will be soft lockup: do { rpc_get_client_for_event (clnt->cl_dentry == NULL ==> choose) __rpc_pipefs_event (clnt->cl_program->pipe_dir_name == NULL ==> return) } while (1) Signed-off-by: Stanislav Kinsbursky Signed-off-by: Trond Myklebust --- net/sunrpc/clnt.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c index d10ebc4310f7..8a19849ff340 100644 --- a/net/sunrpc/clnt.c +++ b/net/sunrpc/clnt.c @@ -184,8 +184,6 @@ static int __rpc_pipefs_event(struct rpc_clnt *clnt, unsigned long event, switch (event) { case RPC_PIPEFS_MOUNT: - if (clnt->cl_program->pipe_dir_name == NULL) - break; dentry = rpc_setup_pipedir_sb(sb, clnt, clnt->cl_program->pipe_dir_name); BUG_ON(dentry == NULL); @@ -215,6 +213,8 @@ static struct rpc_clnt *rpc_get_client_for_event(struct net *net, int event) spin_lock(&sn->rpc_client_lock); list_for_each_entry(clnt, &sn->all_clients, cl_clients) { + if (clnt->cl_program->pipe_dir_name == NULL) + break; if (((event == RPC_PIPEFS_MOUNT) && clnt->cl_dentry) || ((event == RPC_PIPEFS_UMOUNT) && !clnt->cl_dentry)) continue; From 37629b572cc4e80fc24b4139a24df1a89415d534 Mon Sep 17 00:00:00 2001 From: Stanislav Kinsbursky Date: Fri, 20 Apr 2012 18:19:56 +0400 Subject: [PATCH 259/365] SUNRPC: set per-net PipeFS superblock before notification There can be a case, when on MOUNT event RPC client (after it's dentries were created) is not longer hold by anyone except notification callback. I.e. on release this client will be destoroyed. And it's dentries have to be destroyed as well. Which in turn requires per-net PipeFS superblock to be set. Signed-off-by: Stanislav Kinsbursky Signed-off-by: Trond Myklebust --- net/sunrpc/rpc_pipe.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/sunrpc/rpc_pipe.c b/net/sunrpc/rpc_pipe.c index 0af37fc46818..3b62cf288031 100644 --- a/net/sunrpc/rpc_pipe.c +++ b/net/sunrpc/rpc_pipe.c @@ -1126,19 +1126,20 @@ rpc_fill_super(struct super_block *sb, void *data, int silent) return -ENOMEM; dprintk("RPC: sending pipefs MOUNT notification for net %p%s\n", net, NET_NAME(net)); + sn->pipefs_sb = sb; err = blocking_notifier_call_chain(&rpc_pipefs_notifier_list, RPC_PIPEFS_MOUNT, sb); if (err) goto err_depopulate; sb->s_fs_info = get_net(net); - sn->pipefs_sb = sb; return 0; err_depopulate: blocking_notifier_call_chain(&rpc_pipefs_notifier_list, RPC_PIPEFS_UMOUNT, sb); + sn->pipefs_sb = NULL; __rpc_depopulate(root, files, RPCAUTH_lockd, RPCAUTH_RootEOF); return err; } From ea8cfa06795bb30d2ea61f503ef129284492c06a Mon Sep 17 00:00:00 2001 From: Stanislav Kinsbursky Date: Fri, 27 Apr 2012 13:00:17 +0400 Subject: [PATCH 260/365] SUNRPC: traverse clients tree on PipeFS event v2: recursion was replaced by loop If client is a clone, then it's parent can not be in the list. But parent's Pipefs dentries have to be created and destroyed. Note: event skip helper for clients introduced Signed-off-by: Stanislav Kinsbursky Signed-off-by: Trond Myklebust --- net/sunrpc/clnt.c | 29 +++++++++++++++++++++++++---- 1 file changed, 25 insertions(+), 4 deletions(-) diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c index 8a19849ff340..d127bd747527 100644 --- a/net/sunrpc/clnt.c +++ b/net/sunrpc/clnt.c @@ -176,8 +176,16 @@ rpc_setup_pipedir(struct rpc_clnt *clnt, const char *dir_name) return 0; } -static int __rpc_pipefs_event(struct rpc_clnt *clnt, unsigned long event, - struct super_block *sb) +static inline int rpc_clnt_skip_event(struct rpc_clnt *clnt, unsigned long event) +{ + if (((event == RPC_PIPEFS_MOUNT) && clnt->cl_dentry) || + ((event == RPC_PIPEFS_UMOUNT) && !clnt->cl_dentry)) + return 1; + return 0; +} + +static int __rpc_clnt_handle_event(struct rpc_clnt *clnt, unsigned long event, + struct super_block *sb) { struct dentry *dentry; int err = 0; @@ -206,6 +214,20 @@ static int __rpc_pipefs_event(struct rpc_clnt *clnt, unsigned long event, return err; } +static int __rpc_pipefs_event(struct rpc_clnt *clnt, unsigned long event, + struct super_block *sb) +{ + int error = 0; + + for (;; clnt = clnt->cl_parent) { + if (!rpc_clnt_skip_event(clnt, event)) + error = __rpc_clnt_handle_event(clnt, event, sb); + if (error || clnt == clnt->cl_parent) + break; + } + return error; +} + static struct rpc_clnt *rpc_get_client_for_event(struct net *net, int event) { struct sunrpc_net *sn = net_generic(net, sunrpc_net_id); @@ -215,8 +237,7 @@ static struct rpc_clnt *rpc_get_client_for_event(struct net *net, int event) list_for_each_entry(clnt, &sn->all_clients, cl_clients) { if (clnt->cl_program->pipe_dir_name == NULL) break; - if (((event == RPC_PIPEFS_MOUNT) && clnt->cl_dentry) || - ((event == RPC_PIPEFS_UMOUNT) && !clnt->cl_dentry)) + if (rpc_clnt_skip_event(clnt, event)) continue; if (atomic_inc_not_zero(&clnt->cl_count) == 0) continue; From 31e4dda4747713de13889f7c79c7aec341fea61b Mon Sep 17 00:00:00 2001 From: Bryan Schumaker Date: Fri, 27 Apr 2012 13:27:38 -0400 Subject: [PATCH 261/365] NFS: Fix SECINFO_NO_NAME I was using the same decoder function for SECINFO and SECINFO_NO_NAME, so it was returning an error when it tried to decode an OP_SECINFO_NO_NAME header as OP_SECINFO. Signed-off-by: Bryan Schumaker Signed-off-by: Trond Myklebust --- fs/nfs/nfs4xdr.c | 24 +++++++++++++++++++----- 1 file changed, 19 insertions(+), 5 deletions(-) diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c index 203c0967451b..c77e802db736 100644 --- a/fs/nfs/nfs4xdr.c +++ b/fs/nfs/nfs4xdr.c @@ -5094,16 +5094,13 @@ out_err: return -EINVAL; } -static int decode_secinfo(struct xdr_stream *xdr, struct nfs4_secinfo_res *res) +static int decode_secinfo_common(struct xdr_stream *xdr, struct nfs4_secinfo_res *res) { struct nfs4_secinfo_flavor *sec_flavor; int status; __be32 *p; int i, num_flavors; - status = decode_op_hdr(xdr, OP_SECINFO); - if (status) - goto out; p = xdr_inline_decode(xdr, 4); if (unlikely(!p)) goto out_overflow; @@ -5129,6 +5126,7 @@ static int decode_secinfo(struct xdr_stream *xdr, struct nfs4_secinfo_res *res) res->flavors->num_flavors++; } + status = 0; out: return status; out_overflow: @@ -5136,7 +5134,23 @@ out_overflow: return -EIO; } +static int decode_secinfo(struct xdr_stream *xdr, struct nfs4_secinfo_res *res) +{ + int status = decode_op_hdr(xdr, OP_SECINFO); + if (status) + return status; + return decode_secinfo_common(xdr, res); +} + #if defined(CONFIG_NFS_V4_1) +static int decode_secinfo_no_name(struct xdr_stream *xdr, struct nfs4_secinfo_res *res) +{ + int status = decode_op_hdr(xdr, OP_SECINFO_NO_NAME); + if (status) + return status; + return decode_secinfo_common(xdr, res); +} + static int decode_exchange_id(struct xdr_stream *xdr, struct nfs41_exchange_id_res *res) { @@ -6821,7 +6835,7 @@ static int nfs4_xdr_dec_secinfo_no_name(struct rpc_rqst *rqstp, status = decode_putrootfh(xdr); if (status) goto out; - status = decode_secinfo(xdr, res); + status = decode_secinfo_no_name(xdr, res); out: return status; } From db0a9593d52f935c80085d8993bdcead1ad30b0c Mon Sep 17 00:00:00 2001 From: Bryan Schumaker Date: Fri, 27 Apr 2012 13:27:39 -0400 Subject: [PATCH 262/365] NFS: Handle exceptions coming out of nfs4_proc_fs_locations() We don't want to return -NFS4ERR_WRONGSEC to the VFS because it could cause the kernel to oops. Signed-off-by: Bryan Schumaker Signed-off-by: Trond Myklebust --- fs/nfs/nfs4proc.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 2ce069880d6b..ff7571f12bb8 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -4921,7 +4921,7 @@ static void nfs_fixup_referral_attributes(struct nfs_fattr *fattr) fattr->nlink = 2; } -int nfs4_proc_fs_locations(struct inode *dir, const struct qstr *name, +static int _nfs4_proc_fs_locations(struct inode *dir, const struct qstr *name, struct nfs4_fs_locations *fs_locations, struct page *page) { struct nfs_server *server = NFS_SERVER(dir); @@ -4961,6 +4961,19 @@ int nfs4_proc_fs_locations(struct inode *dir, const struct qstr *name, return status; } +int nfs4_proc_fs_locations(struct inode *dir, const struct qstr *name, + struct nfs4_fs_locations *fs_locations, struct page *page) +{ + struct nfs4_exception exception = { }; + int err; + do { + err = nfs4_handle_exception(NFS_SERVER(dir), + _nfs4_proc_fs_locations(dir, name, fs_locations, page), + &exception); + } while (exception.retry); + return err; +} + static int _nfs4_proc_secinfo(struct inode *dir, const struct qstr *name, struct nfs4_secinfo_flavors *flavors) { int status; From 72de53ec4bca39c26709122a8f78bfefe7b6bca4 Mon Sep 17 00:00:00 2001 From: Bryan Schumaker Date: Fri, 27 Apr 2012 13:27:40 -0400 Subject: [PATCH 263/365] NFS: Do secinfo as part of lookup Whenever lookup sees wrongsec do a secinfo and retry the lookup to find attributes of the file or directory, such as "is this a referral mountpoint?". This also allows me to remove handling -NFS4ERR_WRONSEC as part of getattr xdr decoding. Signed-off-by: Bryan Schumaker Signed-off-by: Trond Myklebust --- fs/nfs/internal.h | 1 - fs/nfs/nfs4_fs.h | 4 +++ fs/nfs/nfs4namespace.c | 52 +++++++++++++++++++++++++++++ fs/nfs/nfs4proc.c | 76 +++++++++++++++++++++++++++++------------- fs/nfs/nfs4xdr.c | 2 -- 5 files changed, 109 insertions(+), 26 deletions(-) diff --git a/fs/nfs/internal.h b/fs/nfs/internal.h index 2476dc69365f..45966d953169 100644 --- a/fs/nfs/internal.h +++ b/fs/nfs/internal.h @@ -234,7 +234,6 @@ extern const u32 nfs41_maxwrite_overhead; /* nfs4proc.c */ #ifdef CONFIG_NFS_V4 extern struct rpc_procinfo nfs4_procedures[]; -void nfs_fixup_secinfo_attributes(struct nfs_fattr *, struct nfs_fh *); #endif extern int nfs4_init_ds_session(struct nfs_client *clp); diff --git a/fs/nfs/nfs4_fs.h b/fs/nfs/nfs4_fs.h index b6db9e33fb7b..c82c2cda3dfd 100644 --- a/fs/nfs/nfs4_fs.h +++ b/fs/nfs/nfs4_fs.h @@ -205,6 +205,9 @@ struct nfs4_state_maintenance_ops { extern const struct dentry_operations nfs4_dentry_operations; extern const struct inode_operations nfs4_dir_inode_operations; +/* nfs4namespace.c */ +struct rpc_clnt *nfs4_create_sec_client(struct rpc_clnt *, struct inode *, struct qstr *); + /* nfs4proc.c */ extern int nfs4_proc_setclientid(struct nfs_client *, u32, unsigned short, struct rpc_cred *, struct nfs4_setclientid_res *); extern int nfs4_proc_setclientid_confirm(struct nfs_client *, struct nfs4_setclientid_res *arg, struct rpc_cred *); @@ -215,6 +218,7 @@ extern int nfs4_do_close(struct nfs4_state *state, gfp_t gfp_mask, int wait, boo extern int nfs4_server_capabilities(struct nfs_server *server, struct nfs_fh *fhandle); extern int nfs4_proc_fs_locations(struct inode *dir, const struct qstr *name, struct nfs4_fs_locations *fs_locations, struct page *page); +extern int nfs4_proc_secinfo(struct inode *, const struct qstr *, struct nfs4_secinfo_flavors *); extern int nfs4_release_lockowner(struct nfs4_lock_state *); extern const struct xattr_handler *nfs4_xattr_handlers[]; diff --git a/fs/nfs/nfs4namespace.c b/fs/nfs/nfs4namespace.c index 7483a177dc97..9f8681bf90de 100644 --- a/fs/nfs/nfs4namespace.c +++ b/fs/nfs/nfs4namespace.c @@ -132,6 +132,58 @@ static size_t nfs_parse_server_name(char *string, size_t len, return ret; } +static rpc_authflavor_t nfs4_negotiate_security(struct inode *inode, struct qstr *name) +{ + struct page *page; + struct nfs4_secinfo_flavors *flavors; + rpc_authflavor_t flavor; + int err; + + page = alloc_page(GFP_KERNEL); + if (!page) + return -ENOMEM; + flavors = page_address(page); + + err = nfs4_proc_secinfo(inode, name, flavors); + if (err < 0) { + flavor = err; + goto out; + } + + flavor = nfs_find_best_sec(flavors); + +out: + put_page(page); + return flavor; +} + +/* + * Please call rpc_shutdown_client() when you are done with this client. + */ +struct rpc_clnt *nfs4_create_sec_client(struct rpc_clnt *clnt, struct inode *inode, + struct qstr *name) +{ + struct rpc_clnt *clone; + struct rpc_auth *auth; + rpc_authflavor_t flavor; + + flavor = nfs4_negotiate_security(inode, name); + if (flavor < 0) + return ERR_PTR(flavor); + + clone = rpc_clone_client(clnt); + if (IS_ERR(clone)) + return clone; + + auth = rpcauth_create(flavor, clone); + if (!auth) { + rpc_shutdown_client(clone); + clone = ERR_PTR(-EIO); + } + + return clone; +} + static struct vfsmount *try_location(struct nfs_clone_mount *mountdata, char *page, char *page2, const struct nfs4_fs_location *location) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index ff7571f12bb8..3d92fe6be780 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -2528,37 +2528,67 @@ static int _nfs4_proc_lookup(struct rpc_clnt *clnt, struct inode *dir, return status; } -void nfs_fixup_secinfo_attributes(struct nfs_fattr *fattr, struct nfs_fh *fh) +static void nfs_fixup_secinfo_attributes(struct nfs_fattr *fattr) { - memset(fh, 0, sizeof(struct nfs_fh)); - fattr->fsid.major = 1; fattr->valid |= NFS_ATTR_FATTR_TYPE | NFS_ATTR_FATTR_MODE | - NFS_ATTR_FATTR_NLINK | NFS_ATTR_FATTR_FSID | NFS_ATTR_FATTR_MOUNTPOINT; + NFS_ATTR_FATTR_NLINK | NFS_ATTR_FATTR_MOUNTPOINT; fattr->mode = S_IFDIR | S_IRUGO | S_IXUGO; fattr->nlink = 2; } +static int nfs4_proc_lookup_common(struct rpc_clnt **clnt, struct inode *dir, + struct qstr *name, struct nfs_fh *fhandle, + struct nfs_fattr *fattr) +{ + struct nfs4_exception exception = { }; + struct rpc_clnt *client = *clnt; + int err; + do { + err = _nfs4_proc_lookup(client, dir, name, fhandle, fattr); + switch (err) { + case -NFS4ERR_BADNAME: + err = -ENOENT; + goto out; + case -NFS4ERR_MOVED: + err = nfs4_get_referral(dir, name, fattr, fhandle); + goto out; + case -NFS4ERR_WRONGSEC: + err = -EPERM; + if (client != *clnt) + goto out; + + client = nfs4_create_sec_client(client, dir, name); + if (IS_ERR(client)) + return PTR_ERR(client); + + exception.retry = 1; + break; + default: + err = nfs4_handle_exception(NFS_SERVER(dir), err, &exception); + } + } while (exception.retry); + +out: + if (err == 0) + *clnt = client; + else if (client != *clnt) + rpc_shutdown_client(client); + + return err; +} + static int nfs4_proc_lookup(struct rpc_clnt *clnt, struct inode *dir, struct qstr *name, struct nfs_fh *fhandle, struct nfs_fattr *fattr) { - struct nfs4_exception exception = { }; - int err; - do { - int status; + int status; + struct rpc_clnt *client = NFS_CLIENT(dir); - status = _nfs4_proc_lookup(clnt, dir, name, fhandle, fattr); - switch (status) { - case -NFS4ERR_BADNAME: - return -ENOENT; - case -NFS4ERR_MOVED: - return nfs4_get_referral(dir, name, fattr, fhandle); - case -NFS4ERR_WRONGSEC: - nfs_fixup_secinfo_attributes(fattr, fhandle); - } - err = nfs4_handle_exception(NFS_SERVER(dir), - status, &exception); - } while (exception.retry); - return err; + status = nfs4_proc_lookup_common(&client, dir, name, fhandle, fattr); + if (client != NFS_CLIENT(dir)) { + rpc_shutdown_client(client); + nfs_fixup_secinfo_attributes(fattr); + } + return status; } static int _nfs4_proc_access(struct inode *inode, struct nfs_access_entry *entry) @@ -4996,8 +5026,8 @@ static int _nfs4_proc_secinfo(struct inode *dir, const struct qstr *name, struct return status; } -static int nfs4_proc_secinfo(struct inode *dir, const struct qstr *name, - struct nfs4_secinfo_flavors *flavors) +int nfs4_proc_secinfo(struct inode *dir, const struct qstr *name, + struct nfs4_secinfo_flavors *flavors) { struct nfs4_exception exception = { }; int err; diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c index c77e802db736..c54aae364bee 100644 --- a/fs/nfs/nfs4xdr.c +++ b/fs/nfs/nfs4xdr.c @@ -4258,8 +4258,6 @@ static int decode_getfattr_attrs(struct xdr_stream *xdr, uint32_t *bitmap, status = decode_attr_error(xdr, bitmap, &err); if (status < 0) goto xdr_error; - if (err == -NFS4ERR_WRONGSEC) - nfs_fixup_secinfo_attributes(fattr, fh); status = decode_attr_filehandle(xdr, bitmap, fh); if (status < 0) From f05d147f7e3cf0d86b3a4bd5603029a7cb109633 Mon Sep 17 00:00:00 2001 From: Bryan Schumaker Date: Fri, 27 Apr 2012 13:27:41 -0400 Subject: [PATCH 264/365] NFS: Fix following referral mount points with different security I create a new proc_lookup_mountpoint() to use when submounting an NFS v4 share. This function returns an rpc_clnt to use for performing an fs_locations() call on a referral's mountpoint. Signed-off-by: Bryan Schumaker Signed-off-by: Trond Myklebust --- fs/nfs/internal.h | 4 ++-- fs/nfs/namespace.c | 44 ++++++++++++++++++++++++++++++++---------- fs/nfs/nfs4_fs.h | 6 ++++-- fs/nfs/nfs4namespace.c | 4 ++-- fs/nfs/nfs4proc.c | 40 ++++++++++++++++++++++++++++---------- 5 files changed, 72 insertions(+), 26 deletions(-) diff --git a/fs/nfs/internal.h b/fs/nfs/internal.h index 45966d953169..49c09b4a535a 100644 --- a/fs/nfs/internal.h +++ b/fs/nfs/internal.h @@ -186,10 +186,10 @@ static inline void nfs_fs_proc_exit(void) /* nfs4namespace.c */ #ifdef CONFIG_NFS_V4 -extern struct vfsmount *nfs_do_refmount(struct dentry *dentry); +extern struct vfsmount *nfs_do_refmount(struct rpc_clnt *client, struct dentry *dentry); #else static inline -struct vfsmount *nfs_do_refmount(struct dentry *dentry) +struct vfsmount *nfs_do_refmount(struct rpc_clnt *client, struct dentry *dentry) { return ERR_PTR(-ENOENT); } diff --git a/fs/nfs/namespace.c b/fs/nfs/namespace.c index 1807866bb3ab..b9a593d056b3 100644 --- a/fs/nfs/namespace.c +++ b/fs/nfs/namespace.c @@ -200,6 +200,22 @@ out_shutdown: out: return err; } + +static struct rpc_clnt *nfs_lookup_mountpoint(struct inode *dir, + struct qstr *name, + struct nfs_fh *fh, + struct nfs_fattr *fattr) +{ + int err; + + if (NFS_PROTO(dir)->version == 4) + return nfs4_proc_lookup_mountpoint(dir, name, fh, fattr); + + err = NFS_PROTO(dir)->lookup(NFS_SERVER(dir)->client, dir, name, fh, fattr); + if (err) + return ERR_PTR(err); + return rpc_clone_client(NFS_SERVER(dir)->client); +} #else /* CONFIG_NFS_V4 */ static inline int nfs_lookup_with_sec(struct nfs_server *server, struct dentry *parent, struct dentry *dentry, @@ -209,6 +225,17 @@ static inline int nfs_lookup_with_sec(struct nfs_server *server, { return -EPERM; } + +static inline struct rpc_clnt *nfs_lookup_mountpoint(struct inode *dir, + struct qstr *name, + struct nfs_fh *fh, + struct nfs_fattr *fattr) +{ + int err = NFS_PROTO(dir)->lookup(NFS_SERVER(dir)->client, dir, name, fh, fattr); + if (err) + return ERR_PTR(err); + return rpc_clone_client(NFS_SERVER(dir)->client); +} #endif /* CONFIG_NFS_V4 */ /* @@ -226,11 +253,10 @@ static inline int nfs_lookup_with_sec(struct nfs_server *server, struct vfsmount *nfs_d_automount(struct path *path) { struct vfsmount *mnt; - struct nfs_server *server = NFS_SERVER(path->dentry->d_inode); struct dentry *parent; struct nfs_fh *fh = NULL; struct nfs_fattr *fattr = NULL; - int err; + struct rpc_clnt *client; rpc_authflavor_t flavor = RPC_AUTH_UNIX; dprintk("--> nfs_d_automount()\n"); @@ -249,21 +275,19 @@ struct vfsmount *nfs_d_automount(struct path *path) /* Look it up again to get its attributes */ parent = dget_parent(path->dentry); - err = server->nfs_client->rpc_ops->lookup(server->client, parent->d_inode, - &path->dentry->d_name, - fh, fattr); - if (err == -EPERM && NFS_PROTO(parent->d_inode)->secinfo != NULL) - err = nfs_lookup_with_sec(server, parent, path->dentry, path, fh, fattr, &flavor); + client = nfs_lookup_mountpoint(parent->d_inode, &path->dentry->d_name, fh, fattr); dput(parent); - if (err != 0) { - mnt = ERR_PTR(err); + if (IS_ERR(client)) { + mnt = ERR_CAST(client); goto out; } if (fattr->valid & NFS_ATTR_FATTR_V4_REFERRAL) - mnt = nfs_do_refmount(path->dentry); + mnt = nfs_do_refmount(client, path->dentry); else mnt = nfs_do_submount(path->dentry, fh, fattr, flavor); + rpc_shutdown_client(client); + if (IS_ERR(mnt)) goto out; diff --git a/fs/nfs/nfs4_fs.h b/fs/nfs/nfs4_fs.h index c82c2cda3dfd..8d75021020b3 100644 --- a/fs/nfs/nfs4_fs.h +++ b/fs/nfs/nfs4_fs.h @@ -216,8 +216,10 @@ extern int nfs4_init_clientid(struct nfs_client *, struct rpc_cred *); extern int nfs41_init_clientid(struct nfs_client *, struct rpc_cred *); extern int nfs4_do_close(struct nfs4_state *state, gfp_t gfp_mask, int wait, bool roc); extern int nfs4_server_capabilities(struct nfs_server *server, struct nfs_fh *fhandle); -extern int nfs4_proc_fs_locations(struct inode *dir, const struct qstr *name, - struct nfs4_fs_locations *fs_locations, struct page *page); +extern int nfs4_proc_fs_locations(struct rpc_clnt *, struct inode *, const struct qstr *, + struct nfs4_fs_locations *, struct page *); +extern struct rpc_clnt *nfs4_proc_lookup_mountpoint(struct inode *, struct qstr *, + struct nfs_fh *, struct nfs_fattr *); extern int nfs4_proc_secinfo(struct inode *, const struct qstr *, struct nfs4_secinfo_flavors *); extern int nfs4_release_lockowner(struct nfs4_lock_state *); extern const struct xattr_handler *nfs4_xattr_handlers[]; diff --git a/fs/nfs/nfs4namespace.c b/fs/nfs/nfs4namespace.c index 9f8681bf90de..a7f3dedc4ec7 100644 --- a/fs/nfs/nfs4namespace.c +++ b/fs/nfs/nfs4namespace.c @@ -300,7 +300,7 @@ out: * @dentry - dentry of referral * */ -struct vfsmount *nfs_do_refmount(struct dentry *dentry) +struct vfsmount *nfs_do_refmount(struct rpc_clnt *client, struct dentry *dentry) { struct vfsmount *mnt = ERR_PTR(-ENOMEM); struct dentry *parent; @@ -326,7 +326,7 @@ struct vfsmount *nfs_do_refmount(struct dentry *dentry) dprintk("%s: getting locations for %s/%s\n", __func__, parent->d_name.name, dentry->d_name.name); - err = nfs4_proc_fs_locations(parent->d_inode, &dentry->d_name, fs_locations, page); + err = nfs4_proc_fs_locations(client, parent->d_inode, &dentry->d_name, fs_locations, page); dput(parent); if (err != 0 || fs_locations->nlocations <= 0 || diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 3d92fe6be780..75eb883ed4ce 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -2377,8 +2377,9 @@ static int nfs4_proc_get_root(struct nfs_server *server, struct nfs_fh *fhandle, * Note that we'll actually follow the referral later when * we detect fsid mismatch in inode revalidation */ -static int nfs4_get_referral(struct inode *dir, const struct qstr *name, - struct nfs_fattr *fattr, struct nfs_fh *fhandle) +static int nfs4_get_referral(struct rpc_clnt *client, struct inode *dir, + const struct qstr *name, struct nfs_fattr *fattr, + struct nfs_fh *fhandle) { int status = -ENOMEM; struct page *page = NULL; @@ -2391,7 +2392,7 @@ static int nfs4_get_referral(struct inode *dir, const struct qstr *name, if (locations == NULL) goto out; - status = nfs4_proc_fs_locations(dir, name, locations, page); + status = nfs4_proc_fs_locations(client, dir, name, locations, page); if (status != 0) goto out; /* Make sure server returned a different fsid for the referral */ @@ -2550,7 +2551,7 @@ static int nfs4_proc_lookup_common(struct rpc_clnt **clnt, struct inode *dir, err = -ENOENT; goto out; case -NFS4ERR_MOVED: - err = nfs4_get_referral(dir, name, fattr, fhandle); + err = nfs4_get_referral(client, dir, name, fattr, fhandle); goto out; case -NFS4ERR_WRONGSEC: err = -EPERM; @@ -2591,6 +2592,21 @@ static int nfs4_proc_lookup(struct rpc_clnt *clnt, struct inode *dir, struct qst return status; } +struct rpc_clnt * +nfs4_proc_lookup_mountpoint(struct inode *dir, struct qstr *name, + struct nfs_fh *fhandle, struct nfs_fattr *fattr) +{ + int status; + struct rpc_clnt *client = rpc_clone_client(NFS_CLIENT(dir)); + + status = nfs4_proc_lookup_common(&client, dir, name, fhandle, fattr); + if (status < 0) { + rpc_shutdown_client(client); + return ERR_PTR(status); + } + return client; +} + static int _nfs4_proc_access(struct inode *inode, struct nfs_access_entry *entry) { struct nfs_server *server = NFS_SERVER(inode); @@ -4951,8 +4967,10 @@ static void nfs_fixup_referral_attributes(struct nfs_fattr *fattr) fattr->nlink = 2; } -static int _nfs4_proc_fs_locations(struct inode *dir, const struct qstr *name, - struct nfs4_fs_locations *fs_locations, struct page *page) +static int _nfs4_proc_fs_locations(struct rpc_clnt *client, struct inode *dir, + const struct qstr *name, + struct nfs4_fs_locations *fs_locations, + struct page *page) { struct nfs_server *server = NFS_SERVER(dir); u32 bitmask[2] = { @@ -4986,19 +5004,21 @@ static int _nfs4_proc_fs_locations(struct inode *dir, const struct qstr *name, nfs_fattr_init(&fs_locations->fattr); fs_locations->server = server; fs_locations->nlocations = 0; - status = nfs4_call_sync(server->client, server, &msg, &args.seq_args, &res.seq_res, 0); + status = nfs4_call_sync(client, server, &msg, &args.seq_args, &res.seq_res, 0); dprintk("%s: returned status = %d\n", __func__, status); return status; } -int nfs4_proc_fs_locations(struct inode *dir, const struct qstr *name, - struct nfs4_fs_locations *fs_locations, struct page *page) +int nfs4_proc_fs_locations(struct rpc_clnt *client, struct inode *dir, + const struct qstr *name, + struct nfs4_fs_locations *fs_locations, + struct page *page) { struct nfs4_exception exception = { }; int err; do { err = nfs4_handle_exception(NFS_SERVER(dir), - _nfs4_proc_fs_locations(dir, name, fs_locations, page), + _nfs4_proc_fs_locations(client, dir, name, fs_locations, page), &exception); } while (exception.retry); return err; From 7e6eb683d260d9325f0d1bd911518d5ed3cb4f0c Mon Sep 17 00:00:00 2001 From: Bryan Schumaker Date: Fri, 27 Apr 2012 13:27:42 -0400 Subject: [PATCH 265/365] NFS: Honor the authflavor set in the clone mount data The authflavor is set in an nfs_clone_mount structure and passed to the xdev_mount() functions where it was promptly ignored. Instead, use it to initialize an rpc_clnt for the cloned server. Signed-off-by: Bryan Schumaker Signed-off-by: Trond Myklebust --- fs/nfs/client.c | 5 +++-- fs/nfs/internal.h | 3 ++- fs/nfs/namespace.c | 3 +-- fs/nfs/super.c | 4 ++-- 4 files changed, 8 insertions(+), 7 deletions(-) diff --git a/fs/nfs/client.c b/fs/nfs/client.c index da7b5e4ff9ec..60f7e4ec842c 100644 --- a/fs/nfs/client.c +++ b/fs/nfs/client.c @@ -1729,7 +1729,8 @@ error: */ struct nfs_server *nfs_clone_server(struct nfs_server *source, struct nfs_fh *fh, - struct nfs_fattr *fattr) + struct nfs_fattr *fattr, + rpc_authflavor_t flavor) { struct nfs_server *server; struct nfs_fattr *fattr_fsinfo; @@ -1758,7 +1759,7 @@ struct nfs_server *nfs_clone_server(struct nfs_server *source, error = nfs_init_server_rpcclient(server, source->client->cl_timeout, - source->client->cl_auth->au_flavor); + flavor); if (error < 0) goto out_free_server; if (!IS_ERR(source->client_acl)) diff --git a/fs/nfs/internal.h b/fs/nfs/internal.h index 49c09b4a535a..b777bdaba4c5 100644 --- a/fs/nfs/internal.h +++ b/fs/nfs/internal.h @@ -165,7 +165,8 @@ extern struct nfs_server *nfs4_create_referral_server(struct nfs_clone_mount *, extern void nfs_free_server(struct nfs_server *server); extern struct nfs_server *nfs_clone_server(struct nfs_server *, struct nfs_fh *, - struct nfs_fattr *); + struct nfs_fattr *, + rpc_authflavor_t); extern void nfs_mark_client_ready(struct nfs_client *clp, int state); extern int nfs4_check_client_ready(struct nfs_client *clp); extern struct nfs_client *nfs4_set_ds_client(struct nfs_client* mds_clp, diff --git a/fs/nfs/namespace.c b/fs/nfs/namespace.c index b9a593d056b3..78dde307317f 100644 --- a/fs/nfs/namespace.c +++ b/fs/nfs/namespace.c @@ -257,7 +257,6 @@ struct vfsmount *nfs_d_automount(struct path *path) struct nfs_fh *fh = NULL; struct nfs_fattr *fattr = NULL; struct rpc_clnt *client; - rpc_authflavor_t flavor = RPC_AUTH_UNIX; dprintk("--> nfs_d_automount()\n"); @@ -285,7 +284,7 @@ struct vfsmount *nfs_d_automount(struct path *path) if (fattr->valid & NFS_ATTR_FATTR_V4_REFERRAL) mnt = nfs_do_refmount(client, path->dentry); else - mnt = nfs_do_submount(path->dentry, fh, fattr, flavor); + mnt = nfs_do_submount(path->dentry, fh, fattr, client->cl_auth->au_flavor); rpc_shutdown_client(client); if (IS_ERR(mnt)) diff --git a/fs/nfs/super.c b/fs/nfs/super.c index 1e6715f0616c..4ac7fca7e4bf 100644 --- a/fs/nfs/super.c +++ b/fs/nfs/super.c @@ -2428,7 +2428,7 @@ nfs_xdev_mount(struct file_system_type *fs_type, int flags, dprintk("--> nfs_xdev_mount()\n"); /* create a new volume representation */ - server = nfs_clone_server(NFS_SB(data->sb), data->fh, data->fattr); + server = nfs_clone_server(NFS_SB(data->sb), data->fh, data->fattr, data->authflavor); if (IS_ERR(server)) { error = PTR_ERR(server); goto out_err_noserver; @@ -2955,7 +2955,7 @@ nfs4_xdev_mount(struct file_system_type *fs_type, int flags, dprintk("--> nfs4_xdev_mount()\n"); /* create a new volume representation */ - server = nfs_clone_server(NFS_SB(data->sb), data->fh, data->fattr); + server = nfs_clone_server(NFS_SB(data->sb), data->fh, data->fattr, data->authflavor); if (IS_ERR(server)) { error = PTR_ERR(server); goto out_err_noserver; From e245d4250d0326cfcf7c816a2081b6ab2ea810be Mon Sep 17 00:00:00 2001 From: Bryan Schumaker Date: Fri, 27 Apr 2012 13:27:43 -0400 Subject: [PATCH 266/365] NFS: Remove unused function nfs_lookup_with_sec() This fixes a compiler warning. Signed-off-by: Bryan Schumaker Signed-off-by: Trond Myklebust --- fs/nfs/namespace.c | 62 ---------------------------------------------- 1 file changed, 62 deletions(-) diff --git a/fs/nfs/namespace.c b/fs/nfs/namespace.c index 78dde307317f..d51868e5683c 100644 --- a/fs/nfs/namespace.c +++ b/fs/nfs/namespace.c @@ -148,59 +148,6 @@ rpc_authflavor_t nfs_find_best_sec(struct nfs4_secinfo_flavors *flavors) return pseudoflavor; } -static int nfs_negotiate_security(const struct dentry *parent, - const struct dentry *dentry, - rpc_authflavor_t *flavor) -{ - struct page *page; - struct nfs4_secinfo_flavors *flavors; - int (*secinfo)(struct inode *, const struct qstr *, struct nfs4_secinfo_flavors *); - int ret = -EPERM; - - secinfo = NFS_PROTO(parent->d_inode)->secinfo; - if (secinfo != NULL) { - page = alloc_page(GFP_KERNEL); - if (!page) { - ret = -ENOMEM; - goto out; - } - flavors = page_address(page); - ret = secinfo(parent->d_inode, &dentry->d_name, flavors); - *flavor = nfs_find_best_sec(flavors); - put_page(page); - } - -out: - return ret; -} - -static int nfs_lookup_with_sec(struct nfs_server *server, struct dentry *parent, - struct dentry *dentry, struct path *path, - struct nfs_fh *fh, struct nfs_fattr *fattr, - rpc_authflavor_t *flavor) -{ - struct rpc_clnt *clone; - struct rpc_auth *auth; - int err; - - err = nfs_negotiate_security(parent, path->dentry, flavor); - if (err < 0) - goto out; - clone = rpc_clone_client(server->client); - auth = rpcauth_create(*flavor, clone); - if (!auth) { - err = -EIO; - goto out_shutdown; - } - err = server->nfs_client->rpc_ops->lookup(clone, parent->d_inode, - &path->dentry->d_name, - fh, fattr); -out_shutdown: - rpc_shutdown_client(clone); -out: - return err; -} - static struct rpc_clnt *nfs_lookup_mountpoint(struct inode *dir, struct qstr *name, struct nfs_fh *fh, @@ -217,15 +164,6 @@ static struct rpc_clnt *nfs_lookup_mountpoint(struct inode *dir, return rpc_clone_client(NFS_SERVER(dir)->client); } #else /* CONFIG_NFS_V4 */ -static inline int nfs_lookup_with_sec(struct nfs_server *server, - struct dentry *parent, struct dentry *dentry, - struct path *path, struct nfs_fh *fh, - struct nfs_fattr *fattr, - rpc_authflavor_t *flavor) -{ - return -EPERM; -} - static inline struct rpc_clnt *nfs_lookup_mountpoint(struct inode *dir, struct qstr *name, struct nfs_fh *fh, From 22ac3e82e1d3e5cad92538fe4ab51906cb220444 Mon Sep 17 00:00:00 2001 From: Scott Jiang Date: Mon, 23 Apr 2012 18:18:08 -0400 Subject: [PATCH 267/365] spi/bfin5xx: rename config macro name for bfin5xx spi controller driver This controller is only for blackfin 5xx soc, so rename it to BFIN5XX Signed-off-by: Scott Jiang Signed-off-by: Grant Likely --- drivers/spi/Kconfig | 2 +- drivers/spi/Makefile | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 3ed748355b98..00c024039c97 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -74,7 +74,7 @@ config SPI_ATMEL This selects a driver for the Atmel SPI Controller, present on many AT32 (AVR32) and AT91 (ARM) chips. -config SPI_BFIN +config SPI_BFIN5XX tristate "SPI controller driver for ADI Blackfin5xx" depends on BLACKFIN help diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index a1d48e0ba3dc..9d75d2198ff5 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -15,7 +15,7 @@ obj-$(CONFIG_SPI_ATMEL) += spi-atmel.o obj-$(CONFIG_SPI_ATH79) += spi-ath79.o obj-$(CONFIG_SPI_AU1550) += spi-au1550.o obj-$(CONFIG_SPI_BCM63XX) += spi-bcm63xx.o -obj-$(CONFIG_SPI_BFIN) += spi-bfin5xx.o +obj-$(CONFIG_SPI_BFIN5XX) += spi-bfin5xx.o obj-$(CONFIG_SPI_BFIN_SPORT) += spi-bfin-sport.o obj-$(CONFIG_SPI_BITBANG) += spi-bitbang.o obj-$(CONFIG_SPI_BUTTERFLY) += spi-butterfly.o From 488e1a9de27f0a299fc185f0b5c67246a3f0c6c9 Mon Sep 17 00:00:00 2001 From: Scott Jiang Date: Mon, 23 Apr 2012 18:18:09 -0400 Subject: [PATCH 268/365] spi/spi-bfin-sport: move word length setup to transfer handler Each transfer may have its own bits per word. Signed-off-by: Scott Jiang Signed-off-by: Grant Likely --- drivers/spi/spi-bfin-sport.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/spi/spi-bfin-sport.c b/drivers/spi/spi-bfin-sport.c index 248a2cc671a9..bfd90474c7e2 100644 --- a/drivers/spi/spi-bfin-sport.c +++ b/drivers/spi/spi-bfin-sport.c @@ -252,19 +252,15 @@ static void bfin_sport_spi_restore_state(struct bfin_sport_spi_master_data *drv_data) { struct bfin_sport_spi_slave_data *chip = drv_data->cur_chip; - unsigned int bits = (drv_data->ops == &bfin_sport_transfer_ops_u8 ? 7 : 15); bfin_sport_spi_disable(drv_data); dev_dbg(drv_data->dev, "restoring spi ctl state\n"); bfin_write(&drv_data->regs->tcr1, chip->ctl_reg); - bfin_write(&drv_data->regs->tcr2, bits); bfin_write(&drv_data->regs->tclkdiv, chip->baud); - bfin_write(&drv_data->regs->tfsdiv, bits); SSYNC(); bfin_write(&drv_data->regs->rcr1, chip->ctl_reg & ~(ITCLK | ITFS)); - bfin_write(&drv_data->regs->rcr2, bits); SSYNC(); bfin_sport_spi_cs_active(chip); @@ -425,6 +421,9 @@ bfin_sport_spi_pump_transfers(unsigned long data) drv_data->ops = &bfin_sport_transfer_ops_u8; else drv_data->ops = &bfin_sport_transfer_ops_u16; + bfin_write(&drv_data->regs->tcr2, bits_per_word - 1); + bfin_write(&drv_data->regs->tfsdiv, bits_per_word - 1); + bfin_write(&drv_data->regs->rcr2, bits_per_word - 1); drv_data->state = RUNNING_STATE; From 7666fd8b02af87a8b672b00d47e56d77f709127e Mon Sep 17 00:00:00 2001 From: Scott Jiang Date: Mon, 23 Apr 2012 18:18:10 -0400 Subject: [PATCH 269/365] spi/bfin_spi: drop bits_per_word from client data No other SPI controller has this field, and SPI clients should be setting this up in their own drivers. So drop it from the Blackfin controller to keep people from using it. Signed-off-by: Mike Frysinger Signed-off-by: Scott Jiang Signed-off-by: Grant Likely --- drivers/spi/spi-bfin5xx.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/spi/spi-bfin5xx.c b/drivers/spi/spi-bfin5xx.c index 3b83ff8b1e2b..c0cdcb7c8135 100644 --- a/drivers/spi/spi-bfin5xx.c +++ b/drivers/spi/spi-bfin5xx.c @@ -1026,7 +1026,6 @@ static int bfin_spi_setup(struct spi_device *spi) chip->cs_chg_udelay = chip_info->cs_chg_udelay; chip->idle_tx_val = chip_info->idle_tx_val; chip->pio_interrupt = chip_info->pio_interrupt; - spi->bits_per_word = chip_info->bits_per_word; } else { /* force a default base state */ chip->ctl_reg &= bfin_ctl_reg; From 8d9d2a4b6ca0013b62a438808d22bdd615abcd00 Mon Sep 17 00:00:00 2001 From: Scott Jiang Date: Mon, 23 Apr 2012 18:18:11 -0400 Subject: [PATCH 270/365] spi/spi_bfin_sport: drop bits_per_word from client data Since the member was dropped from the common Blackfin header, we need to stop using it in the SPORT driver too. Signed-off-by: Mike Frysinger Signed-off-by: Scott Jiang Signed-off-by: Grant Likely --- drivers/spi/spi-bfin-sport.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/drivers/spi/spi-bfin-sport.c b/drivers/spi/spi-bfin-sport.c index bfd90474c7e2..1fe51198a622 100644 --- a/drivers/spi/spi-bfin-sport.c +++ b/drivers/spi/spi-bfin-sport.c @@ -416,11 +416,12 @@ bfin_sport_spi_pump_transfers(unsigned long data) drv_data->cs_change = transfer->cs_change; /* Bits per word setup */ - bits_per_word = transfer->bits_per_word ? : message->spi->bits_per_word; - if (bits_per_word == 8) - drv_data->ops = &bfin_sport_transfer_ops_u8; - else + bits_per_word = transfer->bits_per_word ? : + message->spi->bits_per_word ? : 8; + if (bits_per_word % 16 == 0) drv_data->ops = &bfin_sport_transfer_ops_u16; + else + drv_data->ops = &bfin_sport_transfer_ops_u8; bfin_write(&drv_data->regs->tcr2, bits_per_word - 1); bfin_write(&drv_data->regs->tfsdiv, bits_per_word - 1); bfin_write(&drv_data->regs->rcr2, bits_per_word - 1); @@ -597,11 +598,12 @@ bfin_sport_spi_setup(struct spi_device *spi) } chip->cs_chg_udelay = chip_info->cs_chg_udelay; chip->idle_tx_val = chip_info->idle_tx_val; - spi->bits_per_word = chip_info->bits_per_word; } } - if (spi->bits_per_word != 8 && spi->bits_per_word != 16) { + if (spi->bits_per_word % 8) { + dev_err(&spi->dev, "%d bits_per_word is not supported\n", + spi->bits_per_word); ret = -EINVAL; goto error; } From 128465ca7c0775609b1c24f66cd6bddac5f59c9b Mon Sep 17 00:00:00 2001 From: Scott Jiang Date: Mon, 23 Apr 2012 18:18:12 -0400 Subject: [PATCH 271/365] spi/spi-bfin5xx: fix reversed if condition in interrupt mode This condition is used to determine 8 bits or 16 and 32 bits transfer. Obviously it is reversed. Signed-off-by: Scott Jiang Signed-off-by: Grant Likely --- drivers/spi/spi-bfin5xx.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/spi/spi-bfin5xx.c b/drivers/spi/spi-bfin5xx.c index c0cdcb7c8135..432d0190e6ba 100644 --- a/drivers/spi/spi-bfin5xx.c +++ b/drivers/spi/spi-bfin5xx.c @@ -396,7 +396,7 @@ static irqreturn_t bfin_spi_pio_irq_handler(int irq, void *dev_id) /* last read */ if (drv_data->rx) { dev_dbg(&drv_data->pdev->dev, "last read\n"); - if (n_bytes % 2) { + if (!(n_bytes % 2)) { u16 *buf = (u16 *)drv_data->rx; for (loop = 0; loop < n_bytes / 2; loop++) *buf++ = bfin_read(&drv_data->regs->rdbr); @@ -424,7 +424,7 @@ static irqreturn_t bfin_spi_pio_irq_handler(int irq, void *dev_id) if (drv_data->rx && drv_data->tx) { /* duplex */ dev_dbg(&drv_data->pdev->dev, "duplex: write_TDBR\n"); - if (n_bytes % 2) { + if (!(n_bytes % 2)) { u16 *buf = (u16 *)drv_data->rx; u16 *buf2 = (u16 *)drv_data->tx; for (loop = 0; loop < n_bytes / 2; loop++) { @@ -442,7 +442,7 @@ static irqreturn_t bfin_spi_pio_irq_handler(int irq, void *dev_id) } else if (drv_data->rx) { /* read */ dev_dbg(&drv_data->pdev->dev, "read: write_TDBR\n"); - if (n_bytes % 2) { + if (!(n_bytes % 2)) { u16 *buf = (u16 *)drv_data->rx; for (loop = 0; loop < n_bytes / 2; loop++) { *buf++ = bfin_read(&drv_data->regs->rdbr); @@ -458,7 +458,7 @@ static irqreturn_t bfin_spi_pio_irq_handler(int irq, void *dev_id) } else if (drv_data->tx) { /* write */ dev_dbg(&drv_data->pdev->dev, "write: write_TDBR\n"); - if (n_bytes % 2) { + if (!(n_bytes % 2)) { u16 *buf = (u16 *)drv_data->tx; for (loop = 0; loop < n_bytes / 2; loop++) { bfin_read(&drv_data->regs->rdbr); From 2431a8154634027ce3915200699f26fb3725a1f2 Mon Sep 17 00:00:00 2001 From: Scott Jiang Date: Mon, 23 Apr 2012 18:18:13 -0400 Subject: [PATCH 272/365] spi/spi-bfin5xx: Fix flush of last bit after each spi transfer This patch ensures that the last bit of a transfer gets correctly flushed out of the register. Signed-off-by: Scott Jiang Signed-off-by: Grant Likely --- drivers/spi/spi-bfin5xx.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/spi/spi-bfin5xx.c b/drivers/spi/spi-bfin5xx.c index 432d0190e6ba..9bb4d4af8547 100644 --- a/drivers/spi/spi-bfin5xx.c +++ b/drivers/spi/spi-bfin5xx.c @@ -587,6 +587,7 @@ static void bfin_spi_pump_transfers(unsigned long data) if (message->state == DONE_STATE) { dev_dbg(&drv_data->pdev->dev, "transfer: all done!\n"); message->status = 0; + bfin_spi_flush(drv_data); bfin_spi_giveback(drv_data); return; } @@ -870,8 +871,10 @@ static void bfin_spi_pump_transfers(unsigned long data) message->actual_length += drv_data->len_in_bytes; /* Move to next transfer of this msg */ message->state = bfin_spi_next_transfer(drv_data); - if (drv_data->cs_change) + if (drv_data->cs_change && message->state != DONE_STATE) { + bfin_spi_flush(drv_data); bfin_spi_cs_deactive(drv_data, chip); + } } /* Schedule next transfer tasklet */ From fede766f28dd766d4e8feb321fdb19edb21ef6fb Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Fri, 27 Apr 2012 14:23:22 -0400 Subject: [PATCH 273/365] Btrfs: avoid deadlocks from GFP_KERNEL allocations during btrfs_real_readdir Btrfs has an optimization where it will preallocate dentries during readdir to fill in enough information to open the inode without an extra lookup. But, we're calling d_alloc, which is doing GFP_KERNEL allocations, and that leads to deadlocks because our readdir code has tree locks held. For now, disable this optimization. We'll fix the gfp mask in the next merge window. Signed-off-by: Chris Mason --- fs/btrfs/inode.c | 28 ---------------------------- 1 file changed, 28 deletions(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index d953f8820464..3ce7805d1117 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -4192,7 +4192,6 @@ static int btrfs_real_readdir(struct file *filp, void *dirent, struct btrfs_path *path; struct list_head ins_list; struct list_head del_list; - struct qstr q; int ret; struct extent_buffer *leaf; int slot; @@ -4283,7 +4282,6 @@ static int btrfs_real_readdir(struct file *filp, void *dirent, while (di_cur < di_total) { struct btrfs_key location; - struct dentry *tmp; if (verify_dir_item(root, leaf, di)) break; @@ -4304,33 +4302,7 @@ static int btrfs_real_readdir(struct file *filp, void *dirent, d_type = btrfs_filetype_table[btrfs_dir_type(leaf, di)]; btrfs_dir_item_key_to_cpu(leaf, di, &location); - q.name = name_ptr; - q.len = name_len; - q.hash = full_name_hash(q.name, q.len); - tmp = d_lookup(filp->f_dentry, &q); - if (!tmp) { - struct btrfs_key *newkey; - newkey = kzalloc(sizeof(struct btrfs_key), - GFP_NOFS); - if (!newkey) - goto no_dentry; - tmp = d_alloc(filp->f_dentry, &q); - if (!tmp) { - kfree(newkey); - dput(tmp); - goto no_dentry; - } - memcpy(newkey, &location, - sizeof(struct btrfs_key)); - tmp->d_fsdata = newkey; - tmp->d_flags |= DCACHE_NEED_LOOKUP; - d_rehash(tmp); - dput(tmp); - } else { - dput(tmp); - } -no_dentry: /* is this a reference to our own snapshot? If so * skip it. * From dc7fdde39e4962b1a88741f7eba2a6b3be1285d8 Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Fri, 27 Apr 2012 14:31:29 -0400 Subject: [PATCH 274/365] Btrfs: reduce lock contention during extent insertion We're spending huge amounts of time on lock contention during end_io processing because we unconditionally assume we are overwriting an existing extent in the file for each IO. This checks to see if we are outside i_size, and if so, it uses a less expensive readonly search of the btree to look for existing extents. Signed-off-by: Chris Mason --- fs/btrfs/file.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c index d83260d7498f..53bf2d764bbc 100644 --- a/fs/btrfs/file.c +++ b/fs/btrfs/file.c @@ -567,6 +567,7 @@ int btrfs_drop_extents(struct btrfs_trans_handle *trans, struct inode *inode, int extent_type; int recow; int ret; + int modify_tree = -1; if (drop_cache) btrfs_drop_extent_cache(inode, start, end - 1, 0); @@ -575,10 +576,13 @@ int btrfs_drop_extents(struct btrfs_trans_handle *trans, struct inode *inode, if (!path) return -ENOMEM; + if (start >= BTRFS_I(inode)->disk_i_size) + modify_tree = 0; + while (1) { recow = 0; ret = btrfs_lookup_file_extent(trans, root, path, ino, - search_start, -1); + search_start, modify_tree); if (ret < 0) break; if (ret > 0 && path->slots[0] > 0 && search_start == start) { @@ -634,7 +638,8 @@ next_slot: } search_start = max(key.offset, start); - if (recow) { + if (recow || !modify_tree) { + modify_tree = -1; btrfs_release_path(path); continue; } From 1cc2699057bafc512137272e1e848640bad14a41 Mon Sep 17 00:00:00 2001 From: Franky Lin Date: Mon, 23 Apr 2012 14:24:52 -0700 Subject: [PATCH 275/365] brcm80211: fmac: fix SDIO function 0 register r/w issue SDIO stack doesn't have a structure for function 0. The structure pointer stored in card->sdio_func[0] is actually for function 1. With current implementation the register read/write is applied to function 1. This pathch fixes the issue. Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Arend van Spriel Reviewed-by: Florian Fainelli Reviewed-by: Johannes Berg Signed-off-by: Franky Lin Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c index 4688904908ec..758c115b556e 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c @@ -108,9 +108,15 @@ static inline int brcmf_sdioh_f0_write_byte(struct brcmf_sdio_dev *sdiodev, sdio_release_host(sdfunc); } } else if (regaddr == SDIO_CCCR_ABORT) { + sdfunc = kmemdup(sdiodev->func[0], sizeof(struct sdio_func), + GFP_KERNEL); + if (!sdfunc) + return -ENOMEM; + sdfunc->num = 0; sdio_claim_host(sdfunc); sdio_writeb(sdfunc, *byte, regaddr, &err_ret); sdio_release_host(sdfunc); + kfree(sdfunc); } else if (regaddr < 0xF0) { brcmf_dbg(ERROR, "F0 Wr:0x%02x: write disallowed\n", regaddr); err_ret = -EPERM; @@ -486,7 +492,7 @@ static int brcmf_ops_sdio_probe(struct sdio_func *func, kfree(bus_if); return -ENOMEM; } - sdiodev->func[0] = func->card->sdio_func[0]; + sdiodev->func[0] = func; sdiodev->func[1] = func; sdiodev->bus_if = bus_if; bus_if->bus_priv.sdio = sdiodev; From b948a85c1f26d48395de8c6c7e392f008f1be666 Mon Sep 17 00:00:00 2001 From: Franky Lin Date: Mon, 23 Apr 2012 14:24:53 -0700 Subject: [PATCH 276/365] brcm80211: fmac: fix missing completion events issue dpc takes care of all data packets transmissions for sdio function 2. It is possible that it misses some completion events when the traffic is heavy or it's running on a slow cpu. A linked list is introduced to make sure dpc is invoked whenever needed. Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Arend van Spriel Signed-off-by: Franky Lin Signed-off-by: John W. Linville --- .../wireless/brcm80211/brcmfmac/dhd_sdio.c | 63 +++++++++++++++---- 1 file changed, 51 insertions(+), 12 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c index 2bf5dda29291..eb3829b03cd3 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c @@ -574,6 +574,8 @@ struct brcmf_sdio { struct task_struct *dpc_tsk; struct completion dpc_wait; + struct list_head dpc_tsklst; + spinlock_t dpc_tl_lock; struct semaphore sdsem; @@ -2594,29 +2596,58 @@ clkwait: return resched; } +static inline void brcmf_sdbrcm_adddpctsk(struct brcmf_sdio *bus) +{ + struct list_head *new_hd; + unsigned long flags; + + if (in_interrupt()) + new_hd = kzalloc(sizeof(struct list_head), GFP_ATOMIC); + else + new_hd = kzalloc(sizeof(struct list_head), GFP_KERNEL); + if (new_hd == NULL) + return; + + spin_lock_irqsave(&bus->dpc_tl_lock, flags); + list_add_tail(new_hd, &bus->dpc_tsklst); + spin_unlock_irqrestore(&bus->dpc_tl_lock, flags); +} + static int brcmf_sdbrcm_dpc_thread(void *data) { struct brcmf_sdio *bus = (struct brcmf_sdio *) data; + struct list_head *cur_hd, *tmp_hd; + unsigned long flags; allow_signal(SIGTERM); /* Run until signal received */ while (1) { if (kthread_should_stop()) break; - if (!wait_for_completion_interruptible(&bus->dpc_wait)) { - /* Call bus dpc unless it indicated down - (then clean stop) */ - if (bus->sdiodev->bus_if->state != BRCMF_BUS_DOWN) { - if (brcmf_sdbrcm_dpc(bus)) - complete(&bus->dpc_wait); - } else { + + if (list_empty(&bus->dpc_tsklst)) + if (wait_for_completion_interruptible(&bus->dpc_wait)) + break; + + spin_lock_irqsave(&bus->dpc_tl_lock, flags); + list_for_each_safe(cur_hd, tmp_hd, &bus->dpc_tsklst) { + spin_unlock_irqrestore(&bus->dpc_tl_lock, flags); + + if (bus->sdiodev->bus_if->state == BRCMF_BUS_DOWN) { /* after stopping the bus, exit thread */ brcmf_sdbrcm_bus_stop(bus->sdiodev->dev); bus->dpc_tsk = NULL; break; } - } else - break; + + if (brcmf_sdbrcm_dpc(bus)) + brcmf_sdbrcm_adddpctsk(bus); + + spin_lock_irqsave(&bus->dpc_tl_lock, flags); + list_del(cur_hd); + kfree(cur_hd); + } + spin_unlock_irqrestore(&bus->dpc_tl_lock, flags); } return 0; } @@ -2669,8 +2700,10 @@ static int brcmf_sdbrcm_bus_txdata(struct device *dev, struct sk_buff *pkt) /* Schedule DPC if needed to send queued packet(s) */ if (!bus->dpc_sched) { bus->dpc_sched = true; - if (bus->dpc_tsk) + if (bus->dpc_tsk) { + brcmf_sdbrcm_adddpctsk(bus); complete(&bus->dpc_wait); + } } return ret; @@ -3514,8 +3547,10 @@ void brcmf_sdbrcm_isr(void *arg) brcmf_dbg(ERROR, "isr w/o interrupt configured!\n"); bus->dpc_sched = true; - if (bus->dpc_tsk) + if (bus->dpc_tsk) { + brcmf_sdbrcm_adddpctsk(bus); complete(&bus->dpc_wait); + } } static bool brcmf_sdbrcm_bus_watchdog(struct brcmf_sdio *bus) @@ -3559,8 +3594,10 @@ static bool brcmf_sdbrcm_bus_watchdog(struct brcmf_sdio *bus) bus->ipend = true; bus->dpc_sched = true; - if (bus->dpc_tsk) + if (bus->dpc_tsk) { + brcmf_sdbrcm_adddpctsk(bus); complete(&bus->dpc_wait); + } } } @@ -3897,6 +3934,8 @@ void *brcmf_sdbrcm_probe(u32 regsva, struct brcmf_sdio_dev *sdiodev) } /* Initialize DPC thread */ init_completion(&bus->dpc_wait); + INIT_LIST_HEAD(&bus->dpc_tsklst); + spin_lock_init(&bus->dpc_tl_lock); bus->dpc_tsk = kthread_run(brcmf_sdbrcm_dpc_thread, bus, "brcmf_dpc"); if (IS_ERR(bus->dpc_tsk)) { From 3708dc248946daba8802c8f31a68dca81ffc445f Mon Sep 17 00:00:00 2001 From: Jonathan Bither Date: Tue, 24 Apr 2012 05:20:15 -0400 Subject: [PATCH 277/365] ath5k: add missing iounmap to AHB probe removal When our driver device is removed on the AHB bus, our IO memory is never unmapped. Signed-off-by: Jonathan Bither Reviewed-by: Pavel Roskin Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/ahb.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/ath/ath5k/ahb.c b/drivers/net/wireless/ath/ath5k/ahb.c index 8c50d9d19d78..aec33cc207fd 100644 --- a/drivers/net/wireless/ath/ath5k/ahb.c +++ b/drivers/net/wireless/ath/ath5k/ahb.c @@ -220,6 +220,7 @@ static int ath_ahb_remove(struct platform_device *pdev) } ath5k_deinit_ah(ah); + iounmap(ah->iobase); platform_set_drvdata(pdev, NULL); ieee80211_free_hw(hw); From 1ed2ec37b44e86eaa8e0a03b908a39c80f65ee45 Mon Sep 17 00:00:00 2001 From: Wey-Yi Guy Date: Wed, 25 Apr 2012 08:10:08 -0700 Subject: [PATCH 278/365] iwlwifi: use 6000G2B for 6030 device series "iwlwifi: use correct released ucode version" change the ucode api ok from 6000G2 to 6000G2B, but it shall belong to 6030 device series, not the 6005 device series. Fix it Cc: stable@vger.kernel.org #3.3+ Signed-off-by: Wey-Yi Guy Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-6000.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c index b1b69515b1a0..f0c91505a7f7 100644 --- a/drivers/net/wireless/iwlwifi/iwl-6000.c +++ b/drivers/net/wireless/iwlwifi/iwl-6000.c @@ -336,7 +336,7 @@ static const struct iwl_bt_params iwl6000_bt_params = { #define IWL_DEVICE_6005 \ .fw_name_pre = IWL6005_FW_PRE, \ .ucode_api_max = IWL6000G2_UCODE_API_MAX, \ - .ucode_api_ok = IWL6000G2B_UCODE_API_OK, \ + .ucode_api_ok = IWL6000G2_UCODE_API_OK, \ .ucode_api_min = IWL6000G2_UCODE_API_MIN, \ .max_inst_size = IWL60_RTC_INST_SIZE, \ .max_data_size = IWL60_RTC_DATA_SIZE, \ @@ -390,7 +390,7 @@ const struct iwl_cfg iwl6005_2agn_mow2_cfg = { #define IWL_DEVICE_6030 \ .fw_name_pre = IWL6030_FW_PRE, \ .ucode_api_max = IWL6000G2_UCODE_API_MAX, \ - .ucode_api_ok = IWL6000G2_UCODE_API_OK, \ + .ucode_api_ok = IWL6000G2B_UCODE_API_OK, \ .ucode_api_min = IWL6000G2_UCODE_API_MIN, \ .max_inst_size = IWL60_RTC_INST_SIZE, \ .max_data_size = IWL60_RTC_DATA_SIZE, \ From dbdedbdf4fbff3d4962a0786f37aa86dfdc48a7e Mon Sep 17 00:00:00 2001 From: Seth Forshee Date: Wed, 25 Apr 2012 17:28:00 -0500 Subject: [PATCH 279/365] b43: only reload config after successful initialization Commit 2a19032 (b43: reload phy and bss settings after core restarts) introduced an unconditional call to b43_op_config() at the end of b43_op_start(). When firmware fails to load this can wedge the system. There's no need to reload the configuration after a failed initialization anyway, so only make the call if initialization was successful. BugLink: http://bugs.launchpad.net/bugs/950295 Cc: Felix Fietkau Cc: Signed-off-by: Seth Forshee Signed-off-by: John W. Linville --- drivers/net/wireless/b43/main.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index c79e6638c88d..e4d6dc2e37d1 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -4827,8 +4827,14 @@ static int b43_op_start(struct ieee80211_hw *hw) out_mutex_unlock: mutex_unlock(&wl->mutex); - /* reload configuration */ - b43_op_config(hw, ~0); + /* + * Configuration may have been overwritten during initialization. + * Reload the configuration, but only if initialization was + * successful. Reloading the configuration after a failed init + * may hang the system. + */ + if (!err) + b43_op_config(hw, ~0); return err; } From 328c32f0f85467af5a6c4c3289e168d9ad2555af Mon Sep 17 00:00:00 2001 From: Grazvydas Ignotas Date: Thu, 26 Apr 2012 23:07:43 +0300 Subject: [PATCH 280/365] wl1251: fix crash on remove due to premature kfree Currently SDIO glue frees it's own structure before calling wl1251_free_hw(), which in turn calls ieee80211_unregister_hw(). The later call may result in a need to communicate with the chip to stop it (as it happens now if the interface is still up before rmmod), which means calls are made back to the glue, resulting in freed memory access. Fix this by freeing glue data last. Cc: stable@vger.kernel.org # v2.6.37+ Signed-off-by: Grazvydas Ignotas Signed-off-by: John W. Linville --- drivers/net/wireless/wl1251/sdio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/wl1251/sdio.c b/drivers/net/wireless/wl1251/sdio.c index f78694295c39..1b851f650e07 100644 --- a/drivers/net/wireless/wl1251/sdio.c +++ b/drivers/net/wireless/wl1251/sdio.c @@ -315,8 +315,8 @@ static void __devexit wl1251_sdio_remove(struct sdio_func *func) if (wl->irq) free_irq(wl->irq, wl); - kfree(wl_sdio); wl1251_free_hw(wl); + kfree(wl_sdio); sdio_claim_host(func); sdio_release_irq(func); From 4c1bcdb5a3354b250b82a67549f57ac27a3bb85f Mon Sep 17 00:00:00 2001 From: Grazvydas Ignotas Date: Thu, 26 Apr 2012 23:07:44 +0300 Subject: [PATCH 281/365] wl1251: fix crash on remove due to leftover work item This driver currently leaves elp_work behind when stopping, which occasionally results in data corruption because work function ends up accessing freed memory, typical symptoms of this are various worker_thread crashes. Fix it by cancelling elp_work. Cc: stable@vger.kernel.org # v2.6.37+ Signed-off-by: Grazvydas Ignotas Signed-off-by: John W. Linville --- drivers/net/wireless/wl1251/main.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/wl1251/main.c b/drivers/net/wireless/wl1251/main.c index 41302c7b1ad0..d1afb8e3b2ef 100644 --- a/drivers/net/wireless/wl1251/main.c +++ b/drivers/net/wireless/wl1251/main.c @@ -479,6 +479,7 @@ static void wl1251_op_stop(struct ieee80211_hw *hw) cancel_work_sync(&wl->irq_work); cancel_work_sync(&wl->tx_work); cancel_work_sync(&wl->filter_work); + cancel_delayed_work_sync(&wl->elp_work); mutex_lock(&wl->mutex); From 7eb7ce4d2e8991aff4ecb71a81949a907ca755ac Mon Sep 17 00:00:00 2001 From: David Vrabel Date: Thu, 26 Apr 2012 19:44:06 +0100 Subject: [PATCH 282/365] xen: correctly check for pending events when restoring irq flags In xen_restore_fl_direct(), xen_force_evtchn_callback() was being called even if no events were pending. This resulted in (depending on workload) about a 100 times as many xen_version hypercalls as necessary. Fix this by correcting the sense of the conditional jump. This seems to give a significant performance benefit for some workloads. There is some subtle tricksy "..since the check here is trying to check both pending and masked in a single cmpw, but I think this is correct. It will call check_events now only when the combined mask+pending word is 0x0001 (aka unmasked, pending)." (Ian) CC: stable@kernel.org Acked-by: Ian Campbell Signed-off-by: David Vrabel Signed-off-by: Konrad Rzeszutek Wilk --- arch/x86/xen/xen-asm.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/xen/xen-asm.S b/arch/x86/xen/xen-asm.S index 79d7362ad6d1..3e45aa000718 100644 --- a/arch/x86/xen/xen-asm.S +++ b/arch/x86/xen/xen-asm.S @@ -96,7 +96,7 @@ ENTRY(xen_restore_fl_direct) /* check for unmasked and pending */ cmpw $0x0001, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_pending - jz 1f + jnz 1f 2: call check_events 1: ENDPATCH(xen_restore_fl_direct) From cde2e9a651b76d8db36ae94cd0febc82b637e5dd Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Fri, 27 Apr 2012 10:11:48 +0000 Subject: [PATCH 283/365] drop_monitor: fix sleeping in invalid context warning Eric Dumazet pointed out this warning in the drop_monitor protocol to me: [ 38.352571] BUG: sleeping function called from invalid context at kernel/mutex.c:85 [ 38.352576] in_atomic(): 1, irqs_disabled(): 0, pid: 4415, name: dropwatch [ 38.352580] Pid: 4415, comm: dropwatch Not tainted 3.4.0-rc2+ #71 [ 38.352582] Call Trace: [ 38.352592] [] ? trace_napi_poll_hit+0xd0/0xd0 [ 38.352599] [] __might_sleep+0xca/0xf0 [ 38.352606] [] mutex_lock+0x26/0x50 [ 38.352610] [] ? trace_napi_poll_hit+0xd0/0xd0 [ 38.352616] [] tracepoint_probe_register+0x29/0x90 [ 38.352621] [] set_all_monitor_traces+0x105/0x170 [ 38.352625] [] net_dm_cmd_trace+0x2a/0x40 [ 38.352630] [] genl_rcv_msg+0x21a/0x2b0 [ 38.352636] [] ? zone_statistics+0x99/0xc0 [ 38.352640] [] ? genl_rcv+0x30/0x30 [ 38.352645] [] netlink_rcv_skb+0xa9/0xd0 [ 38.352649] [] genl_rcv+0x20/0x30 [ 38.352653] [] netlink_unicast+0x1ae/0x1f0 [ 38.352658] [] netlink_sendmsg+0x2b6/0x310 [ 38.352663] [] sock_sendmsg+0x10f/0x130 [ 38.352668] [] ? move_addr_to_kernel+0x60/0xb0 [ 38.352673] [] ? verify_iovec+0x64/0xe0 [ 38.352677] [] __sys_sendmsg+0x386/0x390 [ 38.352682] [] ? handle_mm_fault+0x139/0x210 [ 38.352687] [] ? do_page_fault+0x1ec/0x4f0 [ 38.352693] [] ? set_next_entity+0x9d/0xb0 [ 38.352699] [] ? tty_ldisc_deref+0x9/0x10 [ 38.352703] [] ? pick_next_task_fair+0x63/0x140 [ 38.352708] [] sys_sendmsg+0x44/0x80 [ 38.352713] [] system_call_fastpath+0x16/0x1b It stems from holding a spinlock (trace_state_lock) while attempting to register or unregister tracepoint hooks, making in_atomic() true in this context, leading to the warning when the tracepoint calls might_sleep() while its taking a mutex. Since we only use the trace_state_lock to prevent trace protocol state races, as well as hardware stat list updates on an rcu write side, we can just convert the spinlock to a mutex to avoid this problem. Signed-off-by: Neil Horman Reported-by: Eric Dumazet CC: David Miller Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- net/core/drop_monitor.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/net/core/drop_monitor.c b/net/core/drop_monitor.c index 5c3c81a609e5..a221a5bbecf7 100644 --- a/net/core/drop_monitor.c +++ b/net/core/drop_monitor.c @@ -42,7 +42,7 @@ static void send_dm_alert(struct work_struct *unused); * netlink alerts */ static int trace_state = TRACE_OFF; -static DEFINE_SPINLOCK(trace_state_lock); +static DEFINE_MUTEX(trace_state_mutex); struct per_cpu_dm_data { struct work_struct dm_alert_work; @@ -214,7 +214,7 @@ static int set_all_monitor_traces(int state) struct dm_hw_stat_delta *new_stat = NULL; struct dm_hw_stat_delta *temp; - spin_lock(&trace_state_lock); + mutex_lock(&trace_state_mutex); if (state == trace_state) { rc = -EAGAIN; @@ -253,7 +253,7 @@ static int set_all_monitor_traces(int state) rc = -EINPROGRESS; out_unlock: - spin_unlock(&trace_state_lock); + mutex_unlock(&trace_state_mutex); return rc; } @@ -296,12 +296,12 @@ static int dropmon_net_event(struct notifier_block *ev_block, new_stat->dev = dev; new_stat->last_rx = jiffies; - spin_lock(&trace_state_lock); + mutex_lock(&trace_state_mutex); list_add_rcu(&new_stat->list, &hw_stats_list); - spin_unlock(&trace_state_lock); + mutex_unlock(&trace_state_mutex); break; case NETDEV_UNREGISTER: - spin_lock(&trace_state_lock); + mutex_lock(&trace_state_mutex); list_for_each_entry_safe(new_stat, tmp, &hw_stats_list, list) { if (new_stat->dev == dev) { new_stat->dev = NULL; @@ -312,7 +312,7 @@ static int dropmon_net_event(struct notifier_block *ev_block, } } } - spin_unlock(&trace_state_lock); + mutex_unlock(&trace_state_mutex); break; } out: From 3885ca785a3618593226687ced84f3f336dc3860 Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Fri, 27 Apr 2012 10:11:49 +0000 Subject: [PATCH 284/365] drop_monitor: Make updating data->skb smp safe Eric Dumazet pointed out to me that the drop_monitor protocol has some holes in its smp protections. Specifically, its possible to replace data->skb while its being written. This patch corrects that by making data->skb an rcu protected variable. That will prevent it from being overwritten while a tracepoint is modifying it. Signed-off-by: Neil Horman Reported-by: Eric Dumazet CC: David Miller Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- net/core/drop_monitor.c | 70 +++++++++++++++++++++++++++++++---------- 1 file changed, 54 insertions(+), 16 deletions(-) diff --git a/net/core/drop_monitor.c b/net/core/drop_monitor.c index a221a5bbecf7..7592943513e3 100644 --- a/net/core/drop_monitor.c +++ b/net/core/drop_monitor.c @@ -46,7 +46,7 @@ static DEFINE_MUTEX(trace_state_mutex); struct per_cpu_dm_data { struct work_struct dm_alert_work; - struct sk_buff *skb; + struct sk_buff __rcu *skb; atomic_t dm_hit_count; struct timer_list send_timer; }; @@ -73,35 +73,58 @@ static int dm_hit_limit = 64; static int dm_delay = 1; static unsigned long dm_hw_check_delta = 2*HZ; static LIST_HEAD(hw_stats_list); +static int initialized = 0; static void reset_per_cpu_data(struct per_cpu_dm_data *data) { size_t al; struct net_dm_alert_msg *msg; struct nlattr *nla; + struct sk_buff *skb; + struct sk_buff *oskb = rcu_dereference_protected(data->skb, 1); al = sizeof(struct net_dm_alert_msg); al += dm_hit_limit * sizeof(struct net_dm_drop_point); al += sizeof(struct nlattr); - data->skb = genlmsg_new(al, GFP_KERNEL); - genlmsg_put(data->skb, 0, 0, &net_drop_monitor_family, - 0, NET_DM_CMD_ALERT); - nla = nla_reserve(data->skb, NLA_UNSPEC, sizeof(struct net_dm_alert_msg)); - msg = nla_data(nla); - memset(msg, 0, al); - atomic_set(&data->dm_hit_count, dm_hit_limit); + skb = genlmsg_new(al, GFP_KERNEL); + + if (skb) { + genlmsg_put(skb, 0, 0, &net_drop_monitor_family, + 0, NET_DM_CMD_ALERT); + nla = nla_reserve(skb, NLA_UNSPEC, + sizeof(struct net_dm_alert_msg)); + msg = nla_data(nla); + memset(msg, 0, al); + } else if (initialized) + schedule_work_on(smp_processor_id(), &data->dm_alert_work); + + /* + * Don't need to lock this, since we are guaranteed to only + * run this on a single cpu at a time. + * Note also that we only update data->skb if the old and new skb + * pointers don't match. This ensures that we don't continually call + * synchornize_rcu if we repeatedly fail to alloc a new netlink message. + */ + if (skb != oskb) { + rcu_assign_pointer(data->skb, skb); + + synchronize_rcu(); + + atomic_set(&data->dm_hit_count, dm_hit_limit); + } + } static void send_dm_alert(struct work_struct *unused) { struct sk_buff *skb; - struct per_cpu_dm_data *data = &__get_cpu_var(dm_cpu_data); + struct per_cpu_dm_data *data = &get_cpu_var(dm_cpu_data); /* * Grab the skb we're about to send */ - skb = data->skb; + skb = rcu_dereference_protected(data->skb, 1); /* * Replace it with a new one @@ -111,8 +134,10 @@ static void send_dm_alert(struct work_struct *unused) /* * Ship it! */ - genlmsg_multicast(skb, 0, NET_DM_GRP_ALERT, GFP_KERNEL); + if (skb) + genlmsg_multicast(skb, 0, NET_DM_GRP_ALERT, GFP_KERNEL); + put_cpu_var(dm_cpu_data); } /* @@ -123,9 +148,11 @@ static void send_dm_alert(struct work_struct *unused) */ static void sched_send_work(unsigned long unused) { - struct per_cpu_dm_data *data = &__get_cpu_var(dm_cpu_data); + struct per_cpu_dm_data *data = &get_cpu_var(dm_cpu_data); - schedule_work(&data->dm_alert_work); + schedule_work_on(smp_processor_id(), &data->dm_alert_work); + + put_cpu_var(dm_cpu_data); } static void trace_drop_common(struct sk_buff *skb, void *location) @@ -134,9 +161,16 @@ static void trace_drop_common(struct sk_buff *skb, void *location) struct nlmsghdr *nlh; struct nlattr *nla; int i; - struct per_cpu_dm_data *data = &__get_cpu_var(dm_cpu_data); + struct sk_buff *dskb; + struct per_cpu_dm_data *data = &get_cpu_var(dm_cpu_data); + rcu_read_lock(); + dskb = rcu_dereference(data->skb); + + if (!dskb) + goto out; + if (!atomic_add_unless(&data->dm_hit_count, -1, 0)) { /* * we're already at zero, discard this hit @@ -144,7 +178,7 @@ static void trace_drop_common(struct sk_buff *skb, void *location) goto out; } - nlh = (struct nlmsghdr *)data->skb->data; + nlh = (struct nlmsghdr *)dskb->data; nla = genlmsg_data(nlmsg_data(nlh)); msg = nla_data(nla); for (i = 0; i < msg->entries; i++) { @@ -158,7 +192,7 @@ static void trace_drop_common(struct sk_buff *skb, void *location) /* * We need to create a new entry */ - __nla_reserve_nohdr(data->skb, sizeof(struct net_dm_drop_point)); + __nla_reserve_nohdr(dskb, sizeof(struct net_dm_drop_point)); nla->nla_len += NLA_ALIGN(sizeof(struct net_dm_drop_point)); memcpy(msg->points[msg->entries].pc, &location, sizeof(void *)); msg->points[msg->entries].count = 1; @@ -170,6 +204,8 @@ static void trace_drop_common(struct sk_buff *skb, void *location) } out: + rcu_read_unlock(); + put_cpu_var(dm_cpu_data); return; } @@ -375,6 +411,8 @@ static int __init init_net_drop_monitor(void) data->send_timer.function = sched_send_work; } + initialized = 1; + goto out; out_unreg: From 700698e7c303f5095107c62a81872c2c3dad1702 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 27 Apr 2012 17:18:59 -0400 Subject: [PATCH 285/365] drm/radeon/kms: need to set up ss on DP bridges as well Makes Nutmeg DP to VGA bridges work for me. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=42490 Noticed by Jerome Glisse (after weeks of debugging). Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/radeon/atombios_crtc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index c5c31e091a92..af1054f8202a 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -958,8 +958,8 @@ static void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode break; } - if (radeon_encoder->active_device & - (ATOM_DEVICE_LCD_SUPPORT | ATOM_DEVICE_DFP_SUPPORT)) { + if ((radeon_encoder->active_device & (ATOM_DEVICE_LCD_SUPPORT | ATOM_DEVICE_DFP_SUPPORT)) || + (radeon_encoder_get_dp_bridge_encoder_id(encoder) != ENCODER_OBJECT_ID_NONE)) { struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv; struct drm_connector *connector = radeon_get_connector_for_encoder(encoder); From 3a69ddd6f872180b6f61fda87152b37202118fbc Mon Sep 17 00:00:00 2001 From: Kenneth Graunke Date: Fri, 27 Apr 2012 12:44:41 -0700 Subject: [PATCH 286/365] drm/i915: Set the Stencil Cache eviction policy to non-LRA mode. Clearing bit 5 of CACHE_MODE_0 is necessary to prevent GPU hangs in OpenGL programs such as Google MapsGL, Google Earth, and gzdoom when using separate stencil buffers. Without it, the GPU tries to use the LRA eviction policy, which isn't supported. This was supposed to be off by default, but seems to be on for many machines. This cannot be done in gen6_init_clock_gating with most of the other workaround bits; the render ring needs to exist. Otherwise, the register write gets dropped on the floor (one printk will show it changed, but a second printk immediately following shows the value reverts to the old one). Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=47535 Cc: stable@vger.kernel.org Cc: Rob Castle Cc: Eric Appleman Cc: aaron667@gmx.net Cc: Keith Packard Signed-off-by: Kenneth Graunke Reviewed-by: Daniel Vetter Acked-by: Daniel Vetter Signed-off-by: Dave Airlie --- drivers/gpu/drm/i915/i915_reg.h | 1 + drivers/gpu/drm/i915/intel_ringbuffer.c | 8 ++++++++ 2 files changed, 9 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index b4bb1ef77ddc..9d24d65f0c3e 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -568,6 +568,7 @@ #define CM0_MASK_SHIFT 16 #define CM0_IZ_OPT_DISABLE (1<<6) #define CM0_ZR_OPT_DISABLE (1<<5) +#define CM0_STC_EVICT_DISABLE_LRA_SNB (1<<5) #define CM0_DEPTH_EVICT_DISABLE (1<<4) #define CM0_COLOR_EVICT_DISABLE (1<<3) #define CM0_DEPTH_WRITE_DISABLE (1<<1) diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c index f75806e5bff5..80fce51e2f43 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.c +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c @@ -401,6 +401,14 @@ static int init_render_ring(struct intel_ring_buffer *ring) if (INTEL_INFO(dev)->gen >= 6) { I915_WRITE(INSTPM, INSTPM_FORCE_ORDERING << 16 | INSTPM_FORCE_ORDERING); + + /* From the Sandybridge PRM, volume 1 part 3, page 24: + * "If this bit is set, STCunit will have LRA as replacement + * policy. [...] This bit must be reset. LRA replacement + * policy is not supported." + */ + I915_WRITE(CACHE_MODE_0, + CM0_STC_EVICT_DISABLE_LRA_SNB << CM0_MASK_SHIFT); } return ret; From 14904927fcef6bb881fd995b478a0d2e700c1818 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Fri, 27 Apr 2012 01:40:10 +0100 Subject: [PATCH 287/365] ARM: 7401/1: mm: Fix section mismatches WARNING: vmlinux.o(.text+0x111b8): Section mismatch in reference from the function arm_memory_present() to the function .init.text:memory_present() The function arm_memory_present() references the function __init memory_present(). This is often because arm_memory_present lacks a __init annotation or the annotation of memory_present is wrong. WARNING: arch/arm/mm/built-in.o(.text+0x1edc): Section mismatch in reference from the function alloc_init_pud() to the function .init.text:alloc_init_section() The function alloc_init_pud() references the function __init alloc_init_section(). This is often because alloc_init_pud lacks a __init annotation or the annotation of alloc_init_section is wrong. Signed-off-by: Stephen Boyd Signed-off-by: Russell King --- arch/arm/mm/init.c | 4 ++-- arch/arm/mm/mmu.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 595079fa9d1d..8f5813bbffb5 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -293,11 +293,11 @@ EXPORT_SYMBOL(pfn_valid); #endif #ifndef CONFIG_SPARSEMEM -static void arm_memory_present(void) +static void __init arm_memory_present(void) { } #else -static void arm_memory_present(void) +static void __init arm_memory_present(void) { struct memblock_region *reg; diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index b86f8933ff91..2c7cf2f9c837 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -618,8 +618,8 @@ static void __init alloc_init_section(pud_t *pud, unsigned long addr, } } -static void alloc_init_pud(pgd_t *pgd, unsigned long addr, unsigned long end, - unsigned long phys, const struct mem_type *type) +static void __init alloc_init_pud(pgd_t *pgd, unsigned long addr, + unsigned long end, unsigned long phys, const struct mem_type *type) { pud_t *pud = pud_offset(pgd, addr); unsigned long next; From 6a1c53124aa161eb624ce7b1e40ade728186d34c Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 27 Apr 2012 12:45:07 +0100 Subject: [PATCH 288/365] ARM: 7403/1: tls: remove covert channel via TPIDRURW TPIDRURW is a user read/write register forming part of the group of thread registers in more recent versions of the ARM architecture (~v6+). Currently, the kernel does not touch this register, which allows tasks to communicate covertly by reading and writing to the register without context-switching affecting its contents. This patch clears TPIDRURW when TPIDRURO is updated via the set_tls macro, which is called directly from __switch_to. Since the current behaviour makes the register useless to userspace as far as thread pointers are concerned, simply clearing the register (rather than saving and restoring it) will not cause any problems to userspace. Cc: stable@vger.kernel.org Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/include/asm/tls.h | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/include/asm/tls.h b/arch/arm/include/asm/tls.h index 60843eb0f61c..73409e6c0251 100644 --- a/arch/arm/include/asm/tls.h +++ b/arch/arm/include/asm/tls.h @@ -7,6 +7,8 @@ .macro set_tls_v6k, tp, tmp1, tmp2 mcr p15, 0, \tp, c13, c0, 3 @ set TLS register + mov \tmp1, #0 + mcr p15, 0, \tmp1, c13, c0, 2 @ clear user r/w TLS register .endm .macro set_tls_v6, tp, tmp1, tmp2 @@ -15,6 +17,8 @@ mov \tmp2, #0xffff0fff tst \tmp1, #HWCAP_TLS @ hardware TLS available? mcrne p15, 0, \tp, c13, c0, 3 @ yes, set TLS register + movne \tmp1, #0 + mcrne p15, 0, \tmp1, c13, c0, 2 @ clear user r/w TLS register streq \tp, [\tmp2, #-15] @ set TLS value at 0xffff0ff0 .endm From 6fa99b7f80b4a7ed2cf616eae393bb6d9d51ba8f Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 27 Apr 2012 12:51:43 +0100 Subject: [PATCH 289/365] ARM: 7405/1: kexec: call platform_cpu_kill on the killer rather than the victim When performing a kexec on an SMP system, the secondary cores are stopped by calling machine_shutdown(), which in turn issues IPIs to offline the other CPUs. Unfortunately, this isn't enough to reboot the cores into a new kernel (since they are just executing a cpu_relax loop somewhere in memory) so we make use of platform_cpu_kill, part of the CPU hotplug implementation, to place the cores somewhere safe. This function expects to be called on the killing CPU for each core that it takes out. This patch moves the platform_cpu_kill callback out of the IPI handler and into smp_send_stop, therefore ensuring that it executes on the killing CPU rather than on the victim, matching what the hotplug code requires. Cc: stable@vger.kernel.org Reported-by: Russell King Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/kernel/smp.c | 28 +++++++++++++++++----------- 1 file changed, 17 insertions(+), 11 deletions(-) diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index addbbe8028c2..f6a4d32b0421 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -510,10 +510,6 @@ static void ipi_cpu_stop(unsigned int cpu) local_fiq_disable(); local_irq_disable(); -#ifdef CONFIG_HOTPLUG_CPU - platform_cpu_kill(cpu); -#endif - while (1) cpu_relax(); } @@ -576,17 +572,25 @@ void smp_send_reschedule(int cpu) smp_cross_call(cpumask_of(cpu), IPI_RESCHEDULE); } +#ifdef CONFIG_HOTPLUG_CPU +static void smp_kill_cpus(cpumask_t *mask) +{ + unsigned int cpu; + for_each_cpu(cpu, mask) + platform_cpu_kill(cpu); +} +#else +static void smp_kill_cpus(cpumask_t *mask) { } +#endif + void smp_send_stop(void) { unsigned long timeout; + struct cpumask mask; - if (num_online_cpus() > 1) { - struct cpumask mask; - cpumask_copy(&mask, cpu_online_mask); - cpumask_clear_cpu(smp_processor_id(), &mask); - - smp_cross_call(&mask, IPI_CPU_STOP); - } + cpumask_copy(&mask, cpu_online_mask); + cpumask_clear_cpu(smp_processor_id(), &mask); + smp_cross_call(&mask, IPI_CPU_STOP); /* Wait up to one second for other CPUs to stop */ timeout = USEC_PER_SEC; @@ -595,6 +599,8 @@ void smp_send_stop(void) if (num_online_cpus() > 1) pr_warning("SMP: failed to stop secondary CPUs\n"); + + smp_kill_cpus(&mask); } /* From 5e7371ded05adfcfcee44a8bc070bfc37979b8f2 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 27 Apr 2012 12:56:24 +0100 Subject: [PATCH 290/365] ARM: 7406/1: hotplug: copy the affinity mask when forcefully migrating IRQs When a CPU is hotplugged off, we migrate any IRQs currently affine to it away and onto another online CPU by calling the irq_set_affinity function of the relevant interrupt controller chip. This function returns either IRQ_SET_MASK_OK or IRQ_SET_MASK_OK_NOCOPY, to indicate whether irq_data.affinity was updated. If we are forcefully migrating an interrupt (because the affinity mask no longer identifies any online CPUs) then we should update the IRQ affinity mask to reflect the new CPU set. Failure to do so can potentially leave /proc/irq/n/smp_affinity identifying only offline CPUs, which may confuse userspace IRQ balancing daemons. This patch updates migrate_one_irq to copy the affinity mask when the interrupt chip returns IRQ_SET_MASK_OK after forcefully changing the affinity of an interrupt. Cc: stable@vger.kernel.org Reported-by: Leif Lindholm Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/kernel/irq.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 71ccdbfed662..8349d4e97e2b 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -155,10 +155,10 @@ static bool migrate_one_irq(struct irq_desc *desc) } c = irq_data_get_irq_chip(d); - if (c->irq_set_affinity) - c->irq_set_affinity(d, affinity, true); - else + if (!c->irq_set_affinity) pr_debug("IRQ%u: unable to set affinity\n", d->irq); + else if (c->irq_set_affinity(d, affinity, true) == IRQ_SET_MASK_OK && ret) + cpumask_copy(d->affinity, affinity); return ret; } From fcbf94b9dedd2ce08e798a99aafc94fec8668161 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 28 Apr 2012 08:29:56 -0700 Subject: [PATCH 291/365] Revert "autofs: work around unhappy compat problem on x86-64" This reverts commit a32744d4abae24572eff7269bc17895c41bd0085. While that commit was technically the right thing to do, and made the x86-64 compat mode work identically to native 32-bit mode (and thus fixing the problem with a 32-bit systemd install on a 64-bit kernel), it turns out that the automount binaries had workarounds for this compat problem. Now, the workarounds are disgusting: doing an "uname()" to find out the architecture of the kernel, and then comparing it for the 64-bit cases and fixing up the size of the read() in automount for those. And they were confused: it's not actually a generic 64-bit issue at all, it's very much tied to just x86-64, which has different alignment for an 'u64' in 64-bit mode than in 32-bit mode. But the end result is that fixing the compat layer actually breaks the case of a 32-bit automount on a x86-64 kernel. There are various approaches to fix this (including just doing a "strcmp()" on current->comm and comparing it to "automount"), but I think that I will do the one that teaches pipes about a special "packet mode", which will allow user space to not have to care too deeply about the padding at the end of the autofs packet. That change will make the compat workaround unnecessary, so let's revert it first, and get automount working again in compat mode. The packetized pipes will then fix autofs for systemd. Reported-and-requested-by: Michael Tokarev Cc: Ian Kent Cc: stable@kernel.org # for 3.3 Signed-off-by: Linus Torvalds --- fs/autofs4/autofs_i.h | 1 - fs/autofs4/dev-ioctl.c | 1 - fs/autofs4/inode.c | 2 -- fs/autofs4/waitq.c | 22 +++------------------- 4 files changed, 3 insertions(+), 23 deletions(-) diff --git a/fs/autofs4/autofs_i.h b/fs/autofs4/autofs_i.h index eb1cc92cd67d..d8d8e7ba6a1e 100644 --- a/fs/autofs4/autofs_i.h +++ b/fs/autofs4/autofs_i.h @@ -110,7 +110,6 @@ struct autofs_sb_info { int sub_version; int min_proto; int max_proto; - int compat_daemon; unsigned long exp_timeout; unsigned int type; int reghost_enabled; diff --git a/fs/autofs4/dev-ioctl.c b/fs/autofs4/dev-ioctl.c index 9dacb8586701..3dfd615afb6b 100644 --- a/fs/autofs4/dev-ioctl.c +++ b/fs/autofs4/dev-ioctl.c @@ -385,7 +385,6 @@ static int autofs_dev_ioctl_setpipefd(struct file *fp, sbi->pipefd = pipefd; sbi->pipe = pipe; sbi->catatonic = 0; - sbi->compat_daemon = is_compat_task(); } out: mutex_unlock(&sbi->wq_mutex); diff --git a/fs/autofs4/inode.c b/fs/autofs4/inode.c index d8dc002e9cc3..14c7bc02349e 100644 --- a/fs/autofs4/inode.c +++ b/fs/autofs4/inode.c @@ -19,7 +19,6 @@ #include #include #include -#include #include "autofs_i.h" #include @@ -225,7 +224,6 @@ int autofs4_fill_super(struct super_block *s, void *data, int silent) set_autofs_type_indirect(&sbi->type); sbi->min_proto = 0; sbi->max_proto = 0; - sbi->compat_daemon = is_compat_task(); mutex_init(&sbi->wq_mutex); mutex_init(&sbi->pipe_mutex); spin_lock_init(&sbi->fs_lock); diff --git a/fs/autofs4/waitq.c b/fs/autofs4/waitq.c index 9c098db43344..da8876d38a7b 100644 --- a/fs/autofs4/waitq.c +++ b/fs/autofs4/waitq.c @@ -91,24 +91,7 @@ static int autofs4_write(struct autofs_sb_info *sbi, return (bytes > 0); } - -/* - * The autofs_v5 packet was misdesigned. - * - * The packets are identical on x86-32 and x86-64, but have different - * alignment. Which means that 'sizeof()' will give different results. - * Fix it up for the case of running 32-bit user mode on a 64-bit kernel. - */ -static noinline size_t autofs_v5_packet_size(struct autofs_sb_info *sbi) -{ - size_t pktsz = sizeof(struct autofs_v5_packet); -#if defined(CONFIG_X86_64) && defined(CONFIG_COMPAT) - if (sbi->compat_daemon > 0) - pktsz -= 4; -#endif - return pktsz; -} - + static void autofs4_notify_daemon(struct autofs_sb_info *sbi, struct autofs_wait_queue *wq, int type) @@ -172,7 +155,8 @@ static void autofs4_notify_daemon(struct autofs_sb_info *sbi, { struct autofs_v5_packet *packet = &pkt.v5_pkt.v5_packet; - pktsz = autofs_v5_packet_size(sbi); + pktsz = sizeof(*packet); + packet->wait_queue_token = wq->wait_queue_token; packet->len = wq->name.len; memcpy(packet->name, wq->name.name, wq->name.len); From 71dfc5fa5160bb73752f0731539404569a77faca Mon Sep 17 00:00:00 2001 From: Stanislav Kinsbursky Date: Sat, 28 Apr 2012 19:32:21 +0400 Subject: [PATCH 292/365] NFS: get module in idmap PipeFS notifier callback This is bug fix. Notifier callback is called from SUNRPC module. So before dereferencing NFS module we have to make sure, that it's alive. Signed-off-by: Stanislav Kinsbursky Signed-off-by: Trond Myklebust --- fs/nfs/idmap.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/fs/nfs/idmap.c b/fs/nfs/idmap.c index b7f348bb618b..ba3019f5934c 100644 --- a/fs/nfs/idmap.c +++ b/fs/nfs/idmap.c @@ -554,12 +554,16 @@ static int rpc_pipefs_event(struct notifier_block *nb, unsigned long event, struct nfs_client *clp; int error = 0; + if (!try_module_get(THIS_MODULE)) + return 0; + while ((clp = nfs_get_client_for_event(sb->s_fs_info, event))) { error = __rpc_pipefs_event(clp, event, sb); nfs_put_client(clp); if (error) break; } + module_put(THIS_MODULE); return error; } From 9883035ae7edef3ec62ad215611cb8e17d6a1a5d Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 29 Apr 2012 13:12:42 -0700 Subject: [PATCH 293/365] pipes: add a "packetized pipe" mode for writing The actual internal pipe implementation is already really about individual packets (called "pipe buffers"), and this simply exposes that as a special packetized mode. When we are in the packetized mode (marked by O_DIRECT as suggested by Alan Cox), a write() on a pipe will not merge the new data with previous writes, so each write will get a pipe buffer of its own. The pipe buffer is then marked with the PIPE_BUF_FLAG_PACKET flag, which in turn will tell the reader side to break the read at that boundary (and throw away any partial packet contents that do not fit in the read buffer). End result: as long as you do writes less than PIPE_BUF in size (so that the pipe doesn't have to split them up), you can now treat the pipe as a packet interface, where each read() system call will read one packet at a time. You can just use a sufficiently big read buffer (PIPE_BUF is sufficient, since bigger than that doesn't guarantee atomicity anyway), and the return value of the read() will naturally give you the size of the packet. NOTE! We do not support zero-sized packets, and zero-sized reads and writes to a pipe continue to be no-ops. Also note that big packets will currently be split at write time, but that the size at which that happens is not really specified (except that it's bigger than PIPE_BUF). Currently that limit is the system page size, but we might want to explicitly support bigger packets some day. The main user for this is going to be the autofs packet interface, allowing us to stop having to care so deeply about exact packet sizes (which have had bugs with 32/64-bit compatibility modes). But user space can create packetized pipes with "pipe2(fd, O_DIRECT)", which will fail with an EINVAL on kernels that do not support this interface. Tested-by: Michael Tokarev Cc: Alan Cox Cc: David Miller Cc: Ian Kent Cc: Thomas Meyer Cc: stable@kernel.org # needed for systemd/autofs interaction fix Signed-off-by: Linus Torvalds --- fs/pipe.c | 31 +++++++++++++++++++++++++++++-- include/linux/pipe_fs_i.h | 1 + 2 files changed, 30 insertions(+), 2 deletions(-) diff --git a/fs/pipe.c b/fs/pipe.c index 25feaa3faac0..fec5e4ad071a 100644 --- a/fs/pipe.c +++ b/fs/pipe.c @@ -346,6 +346,16 @@ static const struct pipe_buf_operations anon_pipe_buf_ops = { .get = generic_pipe_buf_get, }; +static const struct pipe_buf_operations packet_pipe_buf_ops = { + .can_merge = 0, + .map = generic_pipe_buf_map, + .unmap = generic_pipe_buf_unmap, + .confirm = generic_pipe_buf_confirm, + .release = anon_pipe_buf_release, + .steal = generic_pipe_buf_steal, + .get = generic_pipe_buf_get, +}; + static ssize_t pipe_read(struct kiocb *iocb, const struct iovec *_iov, unsigned long nr_segs, loff_t pos) @@ -407,6 +417,13 @@ redo: ret += chars; buf->offset += chars; buf->len -= chars; + + /* Was it a packet buffer? Clean up and exit */ + if (buf->flags & PIPE_BUF_FLAG_PACKET) { + total_len = chars; + buf->len = 0; + } + if (!buf->len) { buf->ops = NULL; ops->release(pipe, buf); @@ -459,6 +476,11 @@ redo: return ret; } +static inline int is_packetized(struct file *file) +{ + return (file->f_flags & O_DIRECT) != 0; +} + static ssize_t pipe_write(struct kiocb *iocb, const struct iovec *_iov, unsigned long nr_segs, loff_t ppos) @@ -593,6 +615,11 @@ redo2: buf->ops = &anon_pipe_buf_ops; buf->offset = 0; buf->len = chars; + buf->flags = 0; + if (is_packetized(filp)) { + buf->ops = &packet_pipe_buf_ops; + buf->flags = PIPE_BUF_FLAG_PACKET; + } pipe->nrbufs = ++bufs; pipe->tmp_page = NULL; @@ -1013,7 +1040,7 @@ struct file *create_write_pipe(int flags) goto err_dentry; f->f_mapping = inode->i_mapping; - f->f_flags = O_WRONLY | (flags & O_NONBLOCK); + f->f_flags = O_WRONLY | (flags & (O_NONBLOCK | O_DIRECT)); f->f_version = 0; return f; @@ -1057,7 +1084,7 @@ int do_pipe_flags(int *fd, int flags) int error; int fdw, fdr; - if (flags & ~(O_CLOEXEC | O_NONBLOCK)) + if (flags & ~(O_CLOEXEC | O_NONBLOCK | O_DIRECT)) return -EINVAL; fw = create_write_pipe(flags); diff --git a/include/linux/pipe_fs_i.h b/include/linux/pipe_fs_i.h index 6d626ff0cfd0..e1ac1ce16fb0 100644 --- a/include/linux/pipe_fs_i.h +++ b/include/linux/pipe_fs_i.h @@ -6,6 +6,7 @@ #define PIPE_BUF_FLAG_LRU 0x01 /* page is on the LRU */ #define PIPE_BUF_FLAG_ATOMIC 0x02 /* was atomically mapped */ #define PIPE_BUF_FLAG_GIFT 0x04 /* page is a gift */ +#define PIPE_BUF_FLAG_PACKET 0x08 /* read() as a packet */ /** * struct pipe_buffer - a linux kernel pipe buffer From 26e0f90fded422f309deb6169dfbccb204435698 Mon Sep 17 00:00:00 2001 From: Marcos Paulo de Souza Date: Sun, 29 Apr 2012 22:29:30 +0200 Subject: [PATCH 294/365] PM / Freezer / Docs: Update documentation about freezing of tasks The file Documentation/power/freezing-of-tasks.txt was still referencing the TIF_FREEZE flag, that was removed by the commit d88e4cb67197d007fb778d62fe17360e970d5bfa(freezer: remove now unused TIF_FREEZE). This patch removes all the references of TIF_FREEZE that were left behind. Signed-off-by: Marcos Paulo de Souza Signed-off-by: Srivatsa S. Bhat Signed-off-by: Rafael J. Wysocki --- Documentation/power/freezing-of-tasks.txt | 37 ++++++++++++----------- 1 file changed, 19 insertions(+), 18 deletions(-) diff --git a/Documentation/power/freezing-of-tasks.txt b/Documentation/power/freezing-of-tasks.txt index ec715cd78fbb..6ec291ea1c78 100644 --- a/Documentation/power/freezing-of-tasks.txt +++ b/Documentation/power/freezing-of-tasks.txt @@ -9,7 +9,7 @@ architectures). II. How does it work? -There are four per-task flags used for that, PF_NOFREEZE, PF_FROZEN, TIF_FREEZE +There are three per-task flags used for that, PF_NOFREEZE, PF_FROZEN and PF_FREEZER_SKIP (the last one is auxiliary). The tasks that have PF_NOFREEZE unset (all user space processes and some kernel threads) are regarded as 'freezable' and treated in a special way before the system enters a @@ -17,30 +17,31 @@ suspend state as well as before a hibernation image is created (in what follows we only consider hibernation, but the description also applies to suspend). Namely, as the first step of the hibernation procedure the function -freeze_processes() (defined in kernel/power/process.c) is called. It executes -try_to_freeze_tasks() that sets TIF_FREEZE for all of the freezable tasks and -either wakes them up, if they are kernel threads, or sends fake signals to them, -if they are user space processes. A task that has TIF_FREEZE set, should react -to it by calling the function called __refrigerator() (defined in -kernel/freezer.c), which sets the task's PF_FROZEN flag, changes its state -to TASK_UNINTERRUPTIBLE and makes it loop until PF_FROZEN is cleared for it. -Then, we say that the task is 'frozen' and therefore the set of functions -handling this mechanism is referred to as 'the freezer' (these functions are -defined in kernel/power/process.c, kernel/freezer.c & include/linux/freezer.h). -User space processes are generally frozen before kernel threads. +freeze_processes() (defined in kernel/power/process.c) is called. A system-wide +variable system_freezing_cnt (as opposed to a per-task flag) is used to indicate +whether the system is to undergo a freezing operation. And freeze_processes() +sets this variable. After this, it executes try_to_freeze_tasks() that sends a +fake signal to all user space processes, and wakes up all the kernel threads. +All freezable tasks must react to that by calling try_to_freeze(), which +results in a call to __refrigerator() (defined in kernel/freezer.c), which sets +the task's PF_FROZEN flag, changes its state to TASK_UNINTERRUPTIBLE and makes +it loop until PF_FROZEN is cleared for it. Then, we say that the task is +'frozen' and therefore the set of functions handling this mechanism is referred +to as 'the freezer' (these functions are defined in kernel/power/process.c, +kernel/freezer.c & include/linux/freezer.h). User space processes are generally +frozen before kernel threads. __refrigerator() must not be called directly. Instead, use the try_to_freeze() function (defined in include/linux/freezer.h), that checks -the task's TIF_FREEZE flag and makes the task enter __refrigerator() if the -flag is set. +if the task is to be frozen and makes the task enter __refrigerator(). For user space processes try_to_freeze() is called automatically from the signal-handling code, but the freezable kernel threads need to call it explicitly in suitable places or use the wait_event_freezable() or wait_event_freezable_timeout() macros (defined in include/linux/freezer.h) -that combine interruptible sleep with checking if TIF_FREEZE is set and calling -try_to_freeze(). The main loop of a freezable kernel thread may look like the -following one: +that combine interruptible sleep with checking if the task is to be frozen and +calling try_to_freeze(). The main loop of a freezable kernel thread may look +like the following one: set_freezable(); do { @@ -53,7 +54,7 @@ following one: (from drivers/usb/core/hub.c::hub_thread()). If a freezable kernel thread fails to call try_to_freeze() after the freezer has -set TIF_FREEZE for it, the freezing of tasks will fail and the entire +initiated a freezing operation, the freezing of tasks will fail and the entire hibernation operation will be cancelled. For this reason, freezable kernel threads must call try_to_freeze() somewhere or use one of the wait_event_freezable() and wait_event_freezable_timeout() macros. From 64f371bc3107e69efce563a3d0f0e6880de0d537 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 29 Apr 2012 13:30:08 -0700 Subject: [PATCH 295/365] autofs: make the autofsv5 packet file descriptor use a packetized pipe The autofs packet size has had a very unfortunate size problem on x86: because the alignment of 'u64' differs in 32-bit and 64-bit modes, and because the packet data was not 8-byte aligned, the size of the autofsv5 packet structure differed between 32-bit and 64-bit modes despite looking otherwise identical (300 vs 304 bytes respectively). We first fixed that up by making the 64-bit compat mode know about this problem in commit a32744d4abae ("autofs: work around unhappy compat problem on x86-64"), and that made a 32-bit 'systemd' work happily on a 64-bit kernel because everything then worked the same way as on a 32-bit kernel. But it turned out that 'automount' had actually known and worked around this problem in user space, so fixing the kernel to do the proper 32-bit compatibility handling actually *broke* 32-bit automount on a 64-bit kernel, because it knew that the packet sizes were wrong and expected those incorrect sizes. As a result, we ended up reverting that compatibility mode fix, and thus breaking systemd again, in commit fcbf94b9dedd. With both automount and systemd doing a single read() system call, and verifying that they get *exactly* the size they expect but using different sizes, it seemed that fixing one of them inevitably seemed to break the other. At one point, a patch I seriously considered applying from Michael Tokarev did a "strcmp()" to see if it was automount that was doing the operation. Ugly, ugly. However, a prettier solution exists now thanks to the packetized pipe mode. By marking the communication pipe as being packetized (by simply setting the O_DIRECT flag), we can always just write the bigger packet size, and if user-space does a smaller read, it will just get that partial end result and the extra alignment padding will simply be thrown away. This makes both automount and systemd happy, since they now get the size they asked for, and the kernel side of autofs simply no longer needs to care - it could pad out the packet arbitrarily. Of course, if there is some *other* user of autofs (please, please, please tell me it ain't so - and we haven't heard of any) that tries to read the packets with multiple writes, that other user will now be broken - the whole point of the packetized mode is that one system call gets exactly one packet, and you cannot read a packet in pieces. Tested-by: Michael Tokarev Cc: Alan Cox Cc: David Miller Cc: Ian Kent Cc: Thomas Meyer Cc: stable@kernel.org Signed-off-by: Linus Torvalds --- fs/autofs4/autofs_i.h | 11 +++++++++++ fs/autofs4/dev-ioctl.c | 2 +- fs/autofs4/inode.c | 2 +- 3 files changed, 13 insertions(+), 2 deletions(-) diff --git a/fs/autofs4/autofs_i.h b/fs/autofs4/autofs_i.h index d8d8e7ba6a1e..908e18455413 100644 --- a/fs/autofs4/autofs_i.h +++ b/fs/autofs4/autofs_i.h @@ -269,6 +269,17 @@ int autofs4_fill_super(struct super_block *, void *, int); struct autofs_info *autofs4_new_ino(struct autofs_sb_info *); void autofs4_clean_ino(struct autofs_info *); +static inline int autofs_prepare_pipe(struct file *pipe) +{ + if (!pipe->f_op || !pipe->f_op->write) + return -EINVAL; + if (!S_ISFIFO(pipe->f_dentry->d_inode->i_mode)) + return -EINVAL; + /* We want a packet pipe */ + pipe->f_flags |= O_DIRECT; + return 0; +} + /* Queue management functions */ int autofs4_wait(struct autofs_sb_info *,struct dentry *, enum autofs_notify); diff --git a/fs/autofs4/dev-ioctl.c b/fs/autofs4/dev-ioctl.c index 3dfd615afb6b..aa9103f8f01b 100644 --- a/fs/autofs4/dev-ioctl.c +++ b/fs/autofs4/dev-ioctl.c @@ -376,7 +376,7 @@ static int autofs_dev_ioctl_setpipefd(struct file *fp, err = -EBADF; goto out; } - if (!pipe->f_op || !pipe->f_op->write) { + if (autofs_prepare_pipe(pipe) < 0) { err = -EPIPE; fput(pipe); goto out; diff --git a/fs/autofs4/inode.c b/fs/autofs4/inode.c index 14c7bc02349e..6e488ebe7784 100644 --- a/fs/autofs4/inode.c +++ b/fs/autofs4/inode.c @@ -290,7 +290,7 @@ int autofs4_fill_super(struct super_block *s, void *data, int silent) printk("autofs: could not open pipe file descriptor\n"); goto fail_dput; } - if (!pipe->f_op || !pipe->f_op->write) + if (autofs_prepare_pipe(pipe) < 0) goto fail_fput; sbi->pipe = pipe; sbi->pipefd = pipefd; From 69964ea4c7b68c9399f7977aa5b9aa6539a6a98a Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 29 Apr 2012 15:19:10 -0700 Subject: [PATCH 296/365] Linux 3.4-rc5 --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index afc868e6c75d..a06ee9fa8022 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 4 SUBLEVEL = 0 -EXTRAVERSION = -rc4 +EXTRAVERSION = -rc5 NAME = Saber-toothed Squirrel # *DOCUMENTATION* From 8751ed14dcdd692733072966bf97b6b8c21ccaad Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Mon, 23 Apr 2012 12:30:01 +0000 Subject: [PATCH 297/365] powerpc/8xx: Fix NR_IRQ bugs and refactor 8xx interrupt controller The mpc8xx driver uses a reference to NR_IRQS that is buggy. It uses NR_IRQs for the array size of the ppc_cached_irq_mask bitmap, but NR_IRQs could be smaller than the number of hardware irqs that ppc_cached_irq_mask tracks. Also, while fixing that problem, it became apparent that the interrupt controller only supports 32 interrupt numbers, but it is written as if it supports multiple register banks which is more complicated. This patch pulls out the buggy reference to NR_IRQs and fixes the size of the ppc_cached_irq_mask to match the number of HW irqs. It also drops the now-unnecessary code since ppc_cached_irq_mask is no longer an array. Signed-off-by: Grant Likely Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/sysdev/mpc8xx_pic.c | 61 +++++++++++--------------------- 1 file changed, 20 insertions(+), 41 deletions(-) diff --git a/arch/powerpc/sysdev/mpc8xx_pic.c b/arch/powerpc/sysdev/mpc8xx_pic.c index d5f5416be310..b724622c3a0b 100644 --- a/arch/powerpc/sysdev/mpc8xx_pic.c +++ b/arch/powerpc/sysdev/mpc8xx_pic.c @@ -18,69 +18,45 @@ extern int cpm_get_irq(struct pt_regs *regs); static struct irq_domain *mpc8xx_pic_host; -#define NR_MASK_WORDS ((NR_IRQS + 31) / 32) -static unsigned long ppc_cached_irq_mask[NR_MASK_WORDS]; +static unsigned long mpc8xx_cached_irq_mask; static sysconf8xx_t __iomem *siu_reg; -int cpm_get_irq(struct pt_regs *regs); +static inline unsigned long mpc8xx_irqd_to_bit(struct irq_data *d) +{ + return 0x80000000 >> irqd_to_hwirq(d); +} static void mpc8xx_unmask_irq(struct irq_data *d) { - int bit, word; - unsigned int irq_nr = (unsigned int)irqd_to_hwirq(d); - - bit = irq_nr & 0x1f; - word = irq_nr >> 5; - - ppc_cached_irq_mask[word] |= (1 << (31-bit)); - out_be32(&siu_reg->sc_simask, ppc_cached_irq_mask[word]); + mpc8xx_cached_irq_mask |= mpc8xx_irqd_to_bit(d); + out_be32(&siu_reg->sc_simask, mpc8xx_cached_irq_mask); } static void mpc8xx_mask_irq(struct irq_data *d) { - int bit, word; - unsigned int irq_nr = (unsigned int)irqd_to_hwirq(d); - - bit = irq_nr & 0x1f; - word = irq_nr >> 5; - - ppc_cached_irq_mask[word] &= ~(1 << (31-bit)); - out_be32(&siu_reg->sc_simask, ppc_cached_irq_mask[word]); + mpc8xx_cached_irq_mask &= ~mpc8xx_irqd_to_bit(d); + out_be32(&siu_reg->sc_simask, mpc8xx_cached_irq_mask); } static void mpc8xx_ack(struct irq_data *d) { - int bit; - unsigned int irq_nr = (unsigned int)irqd_to_hwirq(d); - - bit = irq_nr & 0x1f; - out_be32(&siu_reg->sc_sipend, 1 << (31-bit)); + out_be32(&siu_reg->sc_sipend, mpc8xx_irqd_to_bit(d)); } static void mpc8xx_end_irq(struct irq_data *d) { - int bit, word; - unsigned int irq_nr = (unsigned int)irqd_to_hwirq(d); - - bit = irq_nr & 0x1f; - word = irq_nr >> 5; - - ppc_cached_irq_mask[word] |= (1 << (31-bit)); - out_be32(&siu_reg->sc_simask, ppc_cached_irq_mask[word]); + mpc8xx_cached_irq_mask |= mpc8xx_irqd_to_bit(d); + out_be32(&siu_reg->sc_simask, mpc8xx_cached_irq_mask); } static int mpc8xx_set_irq_type(struct irq_data *d, unsigned int flow_type) { - if (flow_type & IRQ_TYPE_EDGE_FALLING) { - irq_hw_number_t hw = (unsigned int)irqd_to_hwirq(d); + /* only external IRQ senses are programmable */ + if ((flow_type & IRQ_TYPE_EDGE_FALLING) && !(irqd_to_hwirq(d) & 1)) { unsigned int siel = in_be32(&siu_reg->sc_siel); - - /* only external IRQ senses are programmable */ - if ((hw & 1) == 0) { - siel |= (0x80000000 >> hw); - out_be32(&siu_reg->sc_siel, siel); - __irq_set_handler_locked(d->irq, handle_edge_irq); - } + siel |= mpc8xx_irqd_to_bit(d); + out_be32(&siu_reg->sc_siel, siel); + __irq_set_handler_locked(d->irq, handle_edge_irq); } return 0; } @@ -132,6 +108,9 @@ static int mpc8xx_pic_host_xlate(struct irq_domain *h, struct device_node *ct, IRQ_TYPE_EDGE_FALLING, }; + if (intspec[0] > 0x1f) + return 0; + *out_hwirq = intspec[0]; if (intsize > 1 && intspec[1] < 4) *out_flags = map_pic_senses[intspec[1]]; From 4013369f3782af9a488e37c2b603f1dcf008ea76 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Mon, 23 Apr 2012 12:30:02 +0000 Subject: [PATCH 298/365] powerpc/irqdomain: Fix broken NR_IRQ references The switch from using irq_map to irq_alloc_desc*() for managing irq number allocations introduced new bugs in some of the powerpc interrupt code. Several functions rely on the value of NR_IRQS to determine the maximum irq number that could get allocated. However, with sparse_irq and using irq_alloc_desc*() the maximum possible irq number is now specified with 'nr_irqs' which may be a number larger than NR_IRQS. This has caused breakage on powermac when CONFIG_NR_IRQS is set to 32. This patch removes most of the direct references to NR_IRQS in the powerpc code and replaces them with either a nr_irqs reference or by using the common for_each_irq_desc() macro. The powerpc-specific for_each_irq() macro is removed at the same time. Also, the Cell axon_msi driver is refactored to remove the global build assumption on the size of NR_IRQS and instead add a limit to the maximum irq number when calling irq_domain_add_nomap(). Signed-off-by: Grant Likely Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/irq.h | 4 ---- arch/powerpc/kernel/irq.c | 6 +----- arch/powerpc/kernel/machine_kexec.c | 7 ++----- arch/powerpc/platforms/cell/axon_msi.c | 8 +++----- arch/powerpc/platforms/cell/beat_interrupt.c | 2 +- arch/powerpc/platforms/powermac/pic.c | 6 +++--- arch/powerpc/sysdev/cpm2_pic.c | 3 +-- arch/powerpc/sysdev/xics/xics-common.c | 7 +++---- 8 files changed, 14 insertions(+), 29 deletions(-) diff --git a/arch/powerpc/include/asm/irq.h b/arch/powerpc/include/asm/irq.h index e648af92ced1..0e40843a1c6e 100644 --- a/arch/powerpc/include/asm/irq.h +++ b/arch/powerpc/include/asm/irq.h @@ -18,10 +18,6 @@ #include -/* Define a way to iterate across irqs. */ -#define for_each_irq(i) \ - for ((i) = 0; (i) < NR_IRQS; ++(i)) - extern atomic_t ppc_n_lost_interrupts; /* This number is used when no interrupt has been assigned */ diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 5ec1b2354ca6..43eb74fcedde 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -330,14 +330,10 @@ void migrate_irqs(void) alloc_cpumask_var(&mask, GFP_KERNEL); - for_each_irq(irq) { + for_each_irq_desc(irq, desc) { struct irq_data *data; struct irq_chip *chip; - desc = irq_to_desc(irq); - if (!desc) - continue; - data = irq_desc_get_irq_data(desc); if (irqd_is_per_cpu(data)) continue; diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c index c957b1202bdc..5df777794403 100644 --- a/arch/powerpc/kernel/machine_kexec.c +++ b/arch/powerpc/kernel/machine_kexec.c @@ -23,14 +23,11 @@ void machine_kexec_mask_interrupts(void) { unsigned int i; + struct irq_desc *desc; - for_each_irq(i) { - struct irq_desc *desc = irq_to_desc(i); + for_each_irq_desc(i, desc) { struct irq_chip *chip; - if (!desc) - continue; - chip = irq_desc_get_chip(desc); if (!chip) continue; diff --git a/arch/powerpc/platforms/cell/axon_msi.c b/arch/powerpc/platforms/cell/axon_msi.c index d09f3e8e6867..85825b5401e5 100644 --- a/arch/powerpc/platforms/cell/axon_msi.c +++ b/arch/powerpc/platforms/cell/axon_msi.c @@ -114,7 +114,7 @@ static void axon_msi_cascade(unsigned int irq, struct irq_desc *desc) pr_devel("axon_msi: woff %x roff %x msi %x\n", write_offset, msic->read_offset, msi); - if (msi < NR_IRQS && irq_get_chip_data(msi) == msic) { + if (msi < nr_irqs && irq_get_chip_data(msi) == msic) { generic_handle_irq(msi); msic->fifo_virt[idx] = cpu_to_le32(0xffffffff); } else { @@ -276,9 +276,6 @@ static int axon_msi_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) if (rc) return rc; - /* We rely on being able to stash a virq in a u16 */ - BUILD_BUG_ON(NR_IRQS > 65536); - list_for_each_entry(entry, &dev->msi_list, list) { virq = irq_create_direct_mapping(msic->irq_domain); if (virq == NO_IRQ) { @@ -392,7 +389,8 @@ static int axon_msi_probe(struct platform_device *device) } memset(msic->fifo_virt, 0xff, MSIC_FIFO_SIZE_BYTES); - msic->irq_domain = irq_domain_add_nomap(dn, 0, &msic_host_ops, msic); + /* We rely on being able to stash a virq in a u16, so limit irqs to < 65536 */ + msic->irq_domain = irq_domain_add_nomap(dn, 65536, &msic_host_ops, msic); if (!msic->irq_domain) { printk(KERN_ERR "axon_msi: couldn't allocate irq_domain for %s\n", dn->full_name); diff --git a/arch/powerpc/platforms/cell/beat_interrupt.c b/arch/powerpc/platforms/cell/beat_interrupt.c index f9a48af335cb..8c6dc42ecf65 100644 --- a/arch/powerpc/platforms/cell/beat_interrupt.c +++ b/arch/powerpc/platforms/cell/beat_interrupt.c @@ -248,6 +248,6 @@ void beatic_deinit_IRQ(void) { int i; - for (i = 1; i < NR_IRQS; i++) + for (i = 1; i < nr_irqs; i++) beat_destruct_irq_plug(i); } diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c index 66ad93de1d55..c4e630576ff2 100644 --- a/arch/powerpc/platforms/powermac/pic.c +++ b/arch/powerpc/platforms/powermac/pic.c @@ -57,9 +57,9 @@ static int max_real_irqs; static DEFINE_RAW_SPINLOCK(pmac_pic_lock); -#define NR_MASK_WORDS ((NR_IRQS + 31) / 32) -static unsigned long ppc_lost_interrupts[NR_MASK_WORDS]; -static unsigned long ppc_cached_irq_mask[NR_MASK_WORDS]; +/* The max irq number this driver deals with is 128; see max_irqs */ +static DECLARE_BITMAP(ppc_lost_interrupts, 128); +static DECLARE_BITMAP(ppc_cached_irq_mask, 128); static int pmac_irq_cascade = -1; static struct irq_domain *pmac_pic_host; diff --git a/arch/powerpc/sysdev/cpm2_pic.c b/arch/powerpc/sysdev/cpm2_pic.c index d3be961e2ae7..10386b676d87 100644 --- a/arch/powerpc/sysdev/cpm2_pic.c +++ b/arch/powerpc/sysdev/cpm2_pic.c @@ -51,8 +51,7 @@ static intctl_cpm2_t __iomem *cpm2_intctl; static struct irq_domain *cpm2_pic_host; -#define NR_MASK_WORDS ((NR_IRQS + 31) / 32) -static unsigned long ppc_cached_irq_mask[NR_MASK_WORDS]; +static unsigned long ppc_cached_irq_mask[2]; /* 2 32-bit registers */ static const u_char irq_to_siureg[] = { 1, 1, 1, 1, 1, 1, 1, 1, diff --git a/arch/powerpc/sysdev/xics/xics-common.c b/arch/powerpc/sysdev/xics/xics-common.c index ea5e204e3450..cd1d18db92c6 100644 --- a/arch/powerpc/sysdev/xics/xics-common.c +++ b/arch/powerpc/sysdev/xics/xics-common.c @@ -188,6 +188,7 @@ void xics_migrate_irqs_away(void) { int cpu = smp_processor_id(), hw_cpu = hard_smp_processor_id(); unsigned int irq, virq; + struct irq_desc *desc; /* If we used to be the default server, move to the new "boot_cpuid" */ if (hw_cpu == xics_default_server) @@ -202,8 +203,7 @@ void xics_migrate_irqs_away(void) /* Allow IPIs again... */ icp_ops->set_priority(DEFAULT_PRIORITY); - for_each_irq(virq) { - struct irq_desc *desc; + for_each_irq_desc(virq, desc) { struct irq_chip *chip; long server; unsigned long flags; @@ -212,9 +212,8 @@ void xics_migrate_irqs_away(void) /* We can't set affinity on ISA interrupts */ if (virq < NUM_ISA_INTERRUPTS) continue; - desc = irq_to_desc(virq); /* We only need to migrate enabled IRQS */ - if (!desc || !desc->action) + if (!desc->action) continue; if (desc->irq_data.domain != xics_host) continue; From e49f7a9997c61cf800f2db5decba68d318352ef0 Mon Sep 17 00:00:00 2001 From: Gavin Shan Date: Tue, 24 Apr 2012 19:11:22 +0000 Subject: [PATCH 299/365] powerpc/pseries: Rivet CONFIG_EEH for pSeries platform Recently, Ryan Wang tried to compile PPC pSeries platform without CONFIG_EEH and eventually run into errors. Nishanth Aravamudan helped to narrow down the root cause. Actually, the pSeries platform depends on CONFIG_EEH heavily and that won't work properly without EEH support. According to Ben's suggestion, the patch make CONFIG_EEH invisible and keep it as always selected on pSeries platform. Signed-off-by: Gavin Shan Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/pseries/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig index aadbe4f6d537..178a5f300bc9 100644 --- a/arch/powerpc/platforms/pseries/Kconfig +++ b/arch/powerpc/platforms/pseries/Kconfig @@ -30,9 +30,9 @@ config PPC_SPLPAR two or more partitions. config EEH - bool "PCI Extended Error Handling (EEH)" if EXPERT + bool depends on PPC_PSERIES && PCI - default y if !EXPERT + default y config PSERIES_MSI bool From 810b4de25e53459323ff48957b0162b48d6cbd57 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Sat, 28 Apr 2012 18:53:49 -0500 Subject: [PATCH 300/365] tty/serial/pmac_zilog: Fix "nobody cared" IRQ message Following commit a79dd5a titled "tty/serial/pmac_zilog: Fix suspend & resume", my Powerbook G4 Titanium showed the following stack dump: [ 36.878225] irq 23: nobody cared (try booting with the "irqpoll" option) [ 36.878251] Call Trace: [ 36.878291] [dfff3f00] [c000984c] show_stack+0x7c/0x194 (unreliable) [ 36.878322] [dfff3f40] [c00a6868] __report_bad_irq+0x44/0xf4 [ 36.878339] [dfff3f60] [c00a6b04] note_interrupt+0x1ec/0x2ac [ 36.878356] [dfff3f80] [c00a48d0] handle_irq_event_percpu+0x250/0x2b8 [ 36.878372] [dfff3fd0] [c00a496c] handle_irq_event+0x34/0x54 [ 36.878389] [dfff3fe0] [c00a753c] handle_fasteoi_irq+0xb4/0x124 [ 36.878412] [dfff3ff0] [c000f5bc] call_handle_irq+0x18/0x28 [ 36.878428] [deef1f10] [c000719c] do_IRQ+0x114/0x1cc [ 36.878446] [deef1f40] [c0015868] ret_from_except+0x0/0x1c [ 36.878484] --- Exception: 501 at 0xf497610 [ 36.878489] LR = 0xfdc3dd0 [ 36.878497] handlers: [ 36.878510] [] pmz_interrupt [ 36.878520] Disabling IRQ #23 From an E-mail exchange about this problem, Andreas Schwab noticed a typo that resulted in the wrong condition being tested. The patch also corrects 2 typos that incorrectly report why an error branch is being taken. Signed-off-by: Larry Finger Signed-off-by: Benjamin Herrenschmidt --- drivers/tty/serial/pmac_zilog.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/tty/serial/pmac_zilog.c b/drivers/tty/serial/pmac_zilog.c index 08ebe901bb59..654755a990df 100644 --- a/drivers/tty/serial/pmac_zilog.c +++ b/drivers/tty/serial/pmac_zilog.c @@ -469,7 +469,7 @@ static irqreturn_t pmz_interrupt(int irq, void *dev_id) tty = NULL; if (r3 & (CHAEXT | CHATxIP | CHARxIP)) { if (!ZS_IS_OPEN(uap_a)) { - pmz_debug("ChanA interrupt while open !\n"); + pmz_debug("ChanA interrupt while not open !\n"); goto skip_a; } write_zsreg(uap_a, R0, RES_H_IUS); @@ -493,8 +493,8 @@ static irqreturn_t pmz_interrupt(int irq, void *dev_id) spin_lock(&uap_b->port.lock); tty = NULL; if (r3 & (CHBEXT | CHBTxIP | CHBRxIP)) { - if (!ZS_IS_OPEN(uap_a)) { - pmz_debug("ChanB interrupt while open !\n"); + if (!ZS_IS_OPEN(uap_b)) { + pmz_debug("ChanB interrupt while not open !\n"); goto skip_b; } write_zsreg(uap_b, R0, RES_H_IUS); From 5206b524c9b4e289ab0565e7bffd503d2e671c6e Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Fri, 13 Apr 2012 19:22:30 +1000 Subject: [PATCH 301/365] drm/nouveau/bios: fix regression on some nv4x board We started using the connector table on nv4x a while back, and this VBIOS has bad connector indices which causes the wrong encoders to get paired with connectors. Add a quirk to fix this... Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_bios.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_bios.c b/drivers/gpu/drm/nouveau/nouveau_bios.c index 80963d05b54a..0be4a815e706 100644 --- a/drivers/gpu/drm/nouveau/nouveau_bios.c +++ b/drivers/gpu/drm/nouveau/nouveau_bios.c @@ -6156,10 +6156,14 @@ dcb_fake_connectors(struct nvbios *bios) /* heuristic: if we ever get a non-zero connector field, assume * that all the indices are valid and we don't need fake them. + * + * and, as usual, a blacklist of boards with bad bios data.. */ - for (i = 0; i < dcbt->entries; i++) { - if (dcbt->entry[i].connector) - return; + if (!nv_match_device(bios->dev, 0x0392, 0x107d, 0x20a2)) { + for (i = 0; i < dcbt->entries; i++) { + if (dcbt->entry[i].connector) + return; + } } /* no useful connector info available, we need to make it up From 0ed4bb92f5514bd1118c5dd537ce424381110286 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Tue, 24 Apr 2012 13:26:51 +1000 Subject: [PATCH 302/365] drm/nouveau/hdmi: use correct hdmi regs for nvaa/nvac Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nouveau_hdmi.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_hdmi.c b/drivers/gpu/drm/nouveau/nouveau_hdmi.c index 59ea1c14eca0..c3de36384522 100644 --- a/drivers/gpu/drm/nouveau/nouveau_hdmi.c +++ b/drivers/gpu/drm/nouveau/nouveau_hdmi.c @@ -32,7 +32,9 @@ static bool hdmi_sor(struct drm_encoder *encoder) { struct drm_nouveau_private *dev_priv = encoder->dev->dev_private; - if (dev_priv->chipset < 0xa3) + if (dev_priv->chipset < 0xa3 || + dev_priv->chipset == 0xaa || + dev_priv->chipset == 0xac) return false; return true; } From ffc6a4e49e5bc117aac13ed752cfc018c163e2ac Mon Sep 17 00:00:00 2001 From: Christoph Bumiller Date: Thu, 19 Apr 2012 19:59:20 +0200 Subject: [PATCH 303/365] nvc0/fb: shut up PMFB interrupt after the first occurrence Signed-off-by: Christoph Bumiller Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nvc0_fb.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/gpu/drm/nouveau/nvc0_fb.c b/drivers/gpu/drm/nouveau/nvc0_fb.c index 5bf55038fd92..f704e942372e 100644 --- a/drivers/gpu/drm/nouveau/nvc0_fb.c +++ b/drivers/gpu/drm/nouveau/nvc0_fb.c @@ -54,6 +54,11 @@ nvc0_mfb_isr(struct drm_device *dev) nvc0_mfb_subp_isr(dev, unit, subp); units &= ~(1 << unit); } + + /* we do something horribly wrong and upset PMFB a lot, so mask off + * interrupts from it after the first one until it's fixed + */ + nv_mask(dev, 0x000640, 0x02000000, 0x00000000); } static void From b99da31ed8521eb78d5d6930f3128f8ecdb75fae Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Fri, 27 Apr 2012 15:11:33 +1000 Subject: [PATCH 304/365] drm/nv10/gpio: fix thinko in mask for gpio lines 2-9 Signed-off-by: Ben Skeggs --- drivers/gpu/drm/nouveau/nv10_gpio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/nv10_gpio.c b/drivers/gpu/drm/nouveau/nv10_gpio.c index 550ad3fcf0af..9d79180069df 100644 --- a/drivers/gpu/drm/nouveau/nv10_gpio.c +++ b/drivers/gpu/drm/nouveau/nv10_gpio.c @@ -65,7 +65,7 @@ nv10_gpio_drive(struct drm_device *dev, int line, int dir, int out) if (line < 10) { line = (line - 2) * 4; reg = NV_PCRTC_GPIO_EXT; - mask = 0x00000003 << ((line - 2) * 4); + mask = 0x00000003; data = (dir << 1) | out; } else if (line < 14) { From 4b984cd50bc1b6d492175cd77bfabb78e76ffa67 Mon Sep 17 00:00:00 2001 From: Hans Schillstrom Date: Thu, 26 Apr 2012 09:45:34 +0200 Subject: [PATCH 305/365] ipvs: null check of net->ipvs in lblc(r) shedulers Avoid crash when registering shedulers after the IPVS core initialization for netns fails. Do this by checking for present core (net->ipvs). Signed-off-by: Hans Schillstrom Acked-by: Julian Anastasov Signed-off-by: Simon Horman --- net/netfilter/ipvs/ip_vs_lblc.c | 3 +++ net/netfilter/ipvs/ip_vs_lblcr.c | 3 +++ 2 files changed, 6 insertions(+) diff --git a/net/netfilter/ipvs/ip_vs_lblc.c b/net/netfilter/ipvs/ip_vs_lblc.c index 0f16283fd058..caa43704e55e 100644 --- a/net/netfilter/ipvs/ip_vs_lblc.c +++ b/net/netfilter/ipvs/ip_vs_lblc.c @@ -551,6 +551,9 @@ static int __net_init __ip_vs_lblc_init(struct net *net) { struct netns_ipvs *ipvs = net_ipvs(net); + if (!ipvs) + return -ENOENT; + if (!net_eq(net, &init_net)) { ipvs->lblc_ctl_table = kmemdup(vs_vars_table, sizeof(vs_vars_table), diff --git a/net/netfilter/ipvs/ip_vs_lblcr.c b/net/netfilter/ipvs/ip_vs_lblcr.c index eec797f8cce7..548bf37aa29e 100644 --- a/net/netfilter/ipvs/ip_vs_lblcr.c +++ b/net/netfilter/ipvs/ip_vs_lblcr.c @@ -745,6 +745,9 @@ static int __net_init __ip_vs_lblcr_init(struct net *net) { struct netns_ipvs *ipvs = net_ipvs(net); + if (!ipvs) + return -ENOENT; + if (!net_eq(net, &init_net)) { ipvs->lblcr_ctl_table = kmemdup(vs_vars_table, sizeof(vs_vars_table), From 582b8e3eadaec77788c1aa188081a8d5059c42a6 Mon Sep 17 00:00:00 2001 From: Hans Schillstrom Date: Thu, 26 Apr 2012 09:45:35 +0200 Subject: [PATCH 306/365] ipvs: take care of return value from protocol init_netns ip_vs_create_timeout_table() can return NULL All functions protocol init_netns is affected of this patch. Signed-off-by: Hans Schillstrom Acked-by: Julian Anastasov Signed-off-by: Simon Horman --- include/net/ip_vs.h | 2 +- net/netfilter/ipvs/ip_vs_proto.c | 11 +++++++++-- net/netfilter/ipvs/ip_vs_proto_sctp.c | 5 ++++- net/netfilter/ipvs/ip_vs_proto_tcp.c | 5 ++++- net/netfilter/ipvs/ip_vs_proto_udp.c | 5 ++++- 5 files changed, 22 insertions(+), 6 deletions(-) diff --git a/include/net/ip_vs.h b/include/net/ip_vs.h index 2bdee51ba30d..6d90dda2ddb5 100644 --- a/include/net/ip_vs.h +++ b/include/net/ip_vs.h @@ -393,7 +393,7 @@ struct ip_vs_protocol { void (*exit)(struct ip_vs_protocol *pp); - void (*init_netns)(struct net *net, struct ip_vs_proto_data *pd); + int (*init_netns)(struct net *net, struct ip_vs_proto_data *pd); void (*exit_netns)(struct net *net, struct ip_vs_proto_data *pd); diff --git a/net/netfilter/ipvs/ip_vs_proto.c b/net/netfilter/ipvs/ip_vs_proto.c index a62360e29037..ed835e67a07e 100644 --- a/net/netfilter/ipvs/ip_vs_proto.c +++ b/net/netfilter/ipvs/ip_vs_proto.c @@ -78,8 +78,15 @@ register_ip_vs_proto_netns(struct net *net, struct ip_vs_protocol *pp) ipvs->proto_data_table[hash] = pd; atomic_set(&pd->appcnt, 0); /* Init app counter */ - if (pp->init_netns != NULL) - pp->init_netns(net, pd); + if (pp->init_netns != NULL) { + int ret = pp->init_netns(net, pd); + if (ret) { + /* unlink an free proto data */ + ipvs->proto_data_table[hash] = pd->next; + kfree(pd); + return ret; + } + } return 0; } diff --git a/net/netfilter/ipvs/ip_vs_proto_sctp.c b/net/netfilter/ipvs/ip_vs_proto_sctp.c index 1fbf7a2816f5..9f3fb751c491 100644 --- a/net/netfilter/ipvs/ip_vs_proto_sctp.c +++ b/net/netfilter/ipvs/ip_vs_proto_sctp.c @@ -1090,7 +1090,7 @@ out: * timeouts is netns related now. * --------------------------------------------- */ -static void __ip_vs_sctp_init(struct net *net, struct ip_vs_proto_data *pd) +static int __ip_vs_sctp_init(struct net *net, struct ip_vs_proto_data *pd) { struct netns_ipvs *ipvs = net_ipvs(net); @@ -1098,6 +1098,9 @@ static void __ip_vs_sctp_init(struct net *net, struct ip_vs_proto_data *pd) spin_lock_init(&ipvs->sctp_app_lock); pd->timeout_table = ip_vs_create_timeout_table((int *)sctp_timeouts, sizeof(sctp_timeouts)); + if (!pd->timeout_table) + return -ENOMEM; + return 0; } static void __ip_vs_sctp_exit(struct net *net, struct ip_vs_proto_data *pd) diff --git a/net/netfilter/ipvs/ip_vs_proto_tcp.c b/net/netfilter/ipvs/ip_vs_proto_tcp.c index ef8641f7af83..cd609cc62721 100644 --- a/net/netfilter/ipvs/ip_vs_proto_tcp.c +++ b/net/netfilter/ipvs/ip_vs_proto_tcp.c @@ -677,7 +677,7 @@ void ip_vs_tcp_conn_listen(struct net *net, struct ip_vs_conn *cp) * timeouts is netns related now. * --------------------------------------------- */ -static void __ip_vs_tcp_init(struct net *net, struct ip_vs_proto_data *pd) +static int __ip_vs_tcp_init(struct net *net, struct ip_vs_proto_data *pd) { struct netns_ipvs *ipvs = net_ipvs(net); @@ -685,7 +685,10 @@ static void __ip_vs_tcp_init(struct net *net, struct ip_vs_proto_data *pd) spin_lock_init(&ipvs->tcp_app_lock); pd->timeout_table = ip_vs_create_timeout_table((int *)tcp_timeouts, sizeof(tcp_timeouts)); + if (!pd->timeout_table) + return -ENOMEM; pd->tcp_state_table = tcp_states; + return 0; } static void __ip_vs_tcp_exit(struct net *net, struct ip_vs_proto_data *pd) diff --git a/net/netfilter/ipvs/ip_vs_proto_udp.c b/net/netfilter/ipvs/ip_vs_proto_udp.c index f4b7262896bb..2fedb2dcb3d1 100644 --- a/net/netfilter/ipvs/ip_vs_proto_udp.c +++ b/net/netfilter/ipvs/ip_vs_proto_udp.c @@ -467,7 +467,7 @@ udp_state_transition(struct ip_vs_conn *cp, int direction, cp->timeout = pd->timeout_table[IP_VS_UDP_S_NORMAL]; } -static void __udp_init(struct net *net, struct ip_vs_proto_data *pd) +static int __udp_init(struct net *net, struct ip_vs_proto_data *pd) { struct netns_ipvs *ipvs = net_ipvs(net); @@ -475,6 +475,9 @@ static void __udp_init(struct net *net, struct ip_vs_proto_data *pd) spin_lock_init(&ipvs->udp_app_lock); pd->timeout_table = ip_vs_create_timeout_table((int *)udp_timeouts, sizeof(udp_timeouts)); + if (!pd->timeout_table) + return -ENOMEM; + return 0; } static void __udp_exit(struct net *net, struct ip_vs_proto_data *pd) From 8537de8a7ab6681cc72fb0411ab1ba7fdba62dd0 Mon Sep 17 00:00:00 2001 From: Hans Schillstrom Date: Thu, 26 Apr 2012 07:47:44 +0200 Subject: [PATCH 307/365] ipvs: kernel oops - do_ip_vs_get_ctl Change order of init so netns init is ready when register ioctl and netlink. Ver2 Whitespace fixes and __init added. Reported-by: "Ryan O'Hara" Signed-off-by: Hans Schillstrom Acked-by: Julian Anastasov Signed-off-by: Jesper Dangaard Brouer Signed-off-by: Simon Horman --- include/net/ip_vs.h | 2 ++ net/netfilter/ipvs/ip_vs_core.c | 9 ++++++ net/netfilter/ipvs/ip_vs_ctl.c | 52 +++++++++++++++++++-------------- 3 files changed, 41 insertions(+), 22 deletions(-) diff --git a/include/net/ip_vs.h b/include/net/ip_vs.h index 6d90dda2ddb5..72522f087375 100644 --- a/include/net/ip_vs.h +++ b/include/net/ip_vs.h @@ -1203,6 +1203,8 @@ ip_vs_lookup_real_service(struct net *net, int af, __u16 protocol, extern int ip_vs_use_count_inc(void); extern void ip_vs_use_count_dec(void); +extern int ip_vs_register_nl_ioctl(void); +extern void ip_vs_unregister_nl_ioctl(void); extern int ip_vs_control_init(void); extern void ip_vs_control_cleanup(void); extern struct ip_vs_dest * diff --git a/net/netfilter/ipvs/ip_vs_core.c b/net/netfilter/ipvs/ip_vs_core.c index 260b9ef88775..00bdb1d9d690 100644 --- a/net/netfilter/ipvs/ip_vs_core.c +++ b/net/netfilter/ipvs/ip_vs_core.c @@ -1995,10 +1995,18 @@ static int __init ip_vs_init(void) goto cleanup_dev; } + ret = ip_vs_register_nl_ioctl(); + if (ret < 0) { + pr_err("can't register netlink/ioctl.\n"); + goto cleanup_hooks; + } + pr_info("ipvs loaded.\n"); return ret; +cleanup_hooks: + nf_unregister_hooks(ip_vs_ops, ARRAY_SIZE(ip_vs_ops)); cleanup_dev: unregister_pernet_device(&ipvs_core_dev_ops); cleanup_sub: @@ -2014,6 +2022,7 @@ exit: static void __exit ip_vs_cleanup(void) { + ip_vs_unregister_nl_ioctl(); nf_unregister_hooks(ip_vs_ops, ARRAY_SIZE(ip_vs_ops)); unregister_pernet_device(&ipvs_core_dev_ops); unregister_pernet_subsys(&ipvs_core_ops); /* free ip_vs struct */ diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c index 376d2b12d581..f5589987fc80 100644 --- a/net/netfilter/ipvs/ip_vs_ctl.c +++ b/net/netfilter/ipvs/ip_vs_ctl.c @@ -3750,21 +3750,10 @@ void __net_exit ip_vs_control_net_cleanup(struct net *net) free_percpu(ipvs->tot_stats.cpustats); } -int __init ip_vs_control_init(void) +int __init ip_vs_register_nl_ioctl(void) { - int idx; int ret; - EnterFunction(2); - - /* Initialize svc_table, ip_vs_svc_fwm_table, rs_table */ - for(idx = 0; idx < IP_VS_SVC_TAB_SIZE; idx++) { - INIT_LIST_HEAD(&ip_vs_svc_table[idx]); - INIT_LIST_HEAD(&ip_vs_svc_fwm_table[idx]); - } - - smp_wmb(); /* Do we really need it now ? */ - ret = nf_register_sockopt(&ip_vs_sockopts); if (ret) { pr_err("cannot register sockopt.\n"); @@ -3776,28 +3765,47 @@ int __init ip_vs_control_init(void) pr_err("cannot register Generic Netlink interface.\n"); goto err_genl; } - - ret = register_netdevice_notifier(&ip_vs_dst_notifier); - if (ret < 0) - goto err_notf; - - LeaveFunction(2); return 0; -err_notf: - ip_vs_genl_unregister(); err_genl: nf_unregister_sockopt(&ip_vs_sockopts); err_sock: return ret; } +void ip_vs_unregister_nl_ioctl(void) +{ + ip_vs_genl_unregister(); + nf_unregister_sockopt(&ip_vs_sockopts); +} + +int __init ip_vs_control_init(void) +{ + int idx; + int ret; + + EnterFunction(2); + + /* Initialize svc_table, ip_vs_svc_fwm_table, rs_table */ + for (idx = 0; idx < IP_VS_SVC_TAB_SIZE; idx++) { + INIT_LIST_HEAD(&ip_vs_svc_table[idx]); + INIT_LIST_HEAD(&ip_vs_svc_fwm_table[idx]); + } + + smp_wmb(); /* Do we really need it now ? */ + + ret = register_netdevice_notifier(&ip_vs_dst_notifier); + if (ret < 0) + return ret; + + LeaveFunction(2); + return 0; +} + void ip_vs_control_cleanup(void) { EnterFunction(2); unregister_netdevice_notifier(&ip_vs_dst_notifier); - ip_vs_genl_unregister(); - nf_unregister_sockopt(&ip_vs_sockopts); LeaveFunction(2); } From 6cf51852486af3d79f57bf46d00209a14244dbaa Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Fri, 27 Apr 2012 02:00:50 +0200 Subject: [PATCH 308/365] netfilter: xt_CT: fix wrong checking in the timeout assignment path The current checking always succeeded. We have to check the first character of the string to check that it's empty, thus, skipping the timeout path. This fixes the use of the CT target without the timeout option. Signed-off-by: Pablo Neira Ayuso --- net/netfilter/xt_CT.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/netfilter/xt_CT.c b/net/netfilter/xt_CT.c index 59530e93fa58..3746d8b9a478 100644 --- a/net/netfilter/xt_CT.c +++ b/net/netfilter/xt_CT.c @@ -227,7 +227,7 @@ static int xt_ct_tg_check_v1(const struct xt_tgchk_param *par) } #ifdef CONFIG_NF_CONNTRACK_TIMEOUT - if (info->timeout) { + if (info->timeout[0]) { typeof(nf_ct_timeout_find_get_hook) timeout_find_get; struct nf_conn_timeout *timeout_ext; From cbbb34498f8b2b26cbdc79532c8a2ee5cd1e756a Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Mon, 30 Apr 2012 11:52:40 -0400 Subject: [PATCH 309/365] SUNRPC: RPC client must use the current utsname hostname string Now that the rpc client is namespace aware, it needs to use the utsname of the process that created it instead of using the init_utsname. Both rpc_new_client and rpc_clone_client need to be fixed. Signed-off-by: Trond Myklebust Cc: Stanislav Kinsbursky --- net/sunrpc/clnt.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c index d127bd747527..adf2990acebf 100644 --- a/net/sunrpc/clnt.c +++ b/net/sunrpc/clnt.c @@ -279,6 +279,14 @@ void rpc_clients_notifier_unregister(void) return rpc_pipefs_notifier_unregister(&rpc_clients_block); } +static void rpc_clnt_set_nodename(struct rpc_clnt *clnt, const char *nodename) +{ + clnt->cl_nodelen = strlen(nodename); + if (clnt->cl_nodelen > UNX_MAXNODENAME) + clnt->cl_nodelen = UNX_MAXNODENAME; + memcpy(clnt->cl_nodename, nodename, clnt->cl_nodelen); +} + static struct rpc_clnt * rpc_new_client(const struct rpc_create_args *args, struct rpc_xprt *xprt) { const struct rpc_program *program = args->program; @@ -359,10 +367,7 @@ static struct rpc_clnt * rpc_new_client(const struct rpc_create_args *args, stru } /* save the nodename */ - clnt->cl_nodelen = strlen(init_utsname()->nodename); - if (clnt->cl_nodelen > UNX_MAXNODENAME) - clnt->cl_nodelen = UNX_MAXNODENAME; - memcpy(clnt->cl_nodename, init_utsname()->nodename, clnt->cl_nodelen); + rpc_clnt_set_nodename(clnt, utsname()->nodename); rpc_register_client(clnt); return clnt; @@ -521,6 +526,7 @@ rpc_clone_client(struct rpc_clnt *clnt) err = rpc_setup_pipedir(new, clnt->cl_program->pipe_dir_name); if (err != 0) goto out_no_path; + rpc_clnt_set_nodename(new, utsname()->nodename); if (new->cl_auth) atomic_inc(&new->cl_auth->au_count); atomic_inc(&clnt->cl_count); From 3617e5031b3acec04efaa36566a8111ac8f07325 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Mon, 30 Apr 2012 12:04:58 -0400 Subject: [PATCH 310/365] NFSv4.1: Use the correct hostname in the client identifier string We need to use the hostname of the process that created the nfs_client. That hostname is now stored in the rpc_client->cl_nodename. Also remove the utsname()->domainname component. There is no reason to include the NIS/YP domainname in a client identifier string. Signed-off-by: Trond Myklebust --- fs/nfs/nfs4proc.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 75eb883ed4ce..99650aaf8937 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -5122,10 +5122,9 @@ int nfs4_proc_exchange_id(struct nfs_client *clp, struct rpc_cred *cred) nfs4_construct_boot_verifier(clp, &verifier); args.id_len = scnprintf(args.id, sizeof(args.id), - "%s/%s.%s/%u", + "%s/%s/%u", clp->cl_ipaddr, - init_utsname()->nodename, - init_utsname()->domainname, + clp->cl_rpcclient->cl_nodename, clp->cl_rpcclient->cl_auth->au_flavor); res.server_scope = kzalloc(sizeof(struct server_scope), GFP_KERNEL); From 518fbf9cdf17875d808596afd77fc115a6f942ca Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sat, 28 Apr 2012 23:21:56 +0000 Subject: [PATCH 311/365] net: fix sk_sockets_allocated_read_positive Denys Fedoryshchenko reported frequent crashes on a proxy server and kindly provided a lockdep report that explains it all : [ 762.903868] [ 762.903880] ================================= [ 762.903890] [ INFO: inconsistent lock state ] [ 762.903903] 3.3.4-build-0061 #8 Not tainted [ 762.904133] --------------------------------- [ 762.904344] inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. [ 762.904542] squid/1603 [HC0[0]:SC0[0]:HE1:SE1] takes: [ 762.904542] (key#3){+.?...}, at: [] __percpu_counter_sum+0xd/0x58 [ 762.904542] {IN-SOFTIRQ-W} state was registered at: [ 762.904542] [] __lock_acquire+0x284/0xc26 [ 762.904542] [] lock_acquire+0x71/0x85 [ 762.904542] [] _raw_spin_lock+0x33/0x40 [ 762.904542] [] __percpu_counter_add+0x58/0x7c [ 762.904542] [] sk_clone_lock+0x1e5/0x200 [ 762.904542] [] inet_csk_clone_lock+0xe/0x78 [ 762.904542] [] tcp_create_openreq_child+0x1b/0x404 [ 762.904542] [] tcp_v4_syn_recv_sock+0x32/0x1c1 [ 762.904542] [] tcp_check_req+0x1fd/0x2d7 [ 762.904542] [] tcp_v4_do_rcv+0xab/0x194 [ 762.904542] [] tcp_v4_rcv+0x3b3/0x5cc [ 762.904542] [] ip_local_deliver_finish+0x13a/0x1e9 [ 762.904542] [] NF_HOOK.clone.11+0x46/0x4d [ 762.904542] [] ip_local_deliver+0x41/0x45 [ 762.904542] [] ip_rcv_finish+0x31a/0x33c [ 762.904542] [] NF_HOOK.clone.11+0x46/0x4d [ 762.904542] [] ip_rcv+0x201/0x23e [ 762.904542] [] __netif_receive_skb+0x319/0x368 [ 762.904542] [] netif_receive_skb+0x4e/0x7d [ 762.904542] [] napi_skb_finish+0x1e/0x34 [ 762.904542] [] napi_gro_receive+0x20/0x24 [ 762.904542] [] e1000_receive_skb+0x3f/0x45 [e1000e] [ 762.904542] [] e1000_clean_rx_irq+0x1f9/0x284 [e1000e] [ 762.904542] [] e1000_clean+0x62/0x1f4 [e1000e] [ 762.904542] [] net_rx_action+0x90/0x160 [ 762.904542] [] __do_softirq+0x7b/0x118 [ 762.904542] irq event stamp: 156915469 [ 762.904542] hardirqs last enabled at (156915469): [] __slab_alloc.clone.58.clone.63+0xc4/0x2de [ 762.904542] hardirqs last disabled at (156915468): [] __slab_alloc.clone.58.clone.63+0x22/0x2de [ 762.904542] softirqs last enabled at (156915466): [] lock_sock_nested+0x64/0x6c [ 762.904542] softirqs last disabled at (156915464): [] _raw_spin_lock_bh+0xe/0x45 [ 762.904542] [ 762.904542] other info that might help us debug this: [ 762.904542] Possible unsafe locking scenario: [ 762.904542] [ 762.904542] CPU0 [ 762.904542] ---- [ 762.904542] lock(key#3); [ 762.904542] [ 762.904542] lock(key#3); [ 762.904542] [ 762.904542] *** DEADLOCK *** [ 762.904542] [ 762.904542] 1 lock held by squid/1603: [ 762.904542] #0: (sk_lock-AF_INET){+.+.+.}, at: [] lock_sock+0xa/0xc [ 762.904542] [ 762.904542] stack backtrace: [ 762.904542] Pid: 1603, comm: squid Not tainted 3.3.4-build-0061 #8 [ 762.904542] Call Trace: [ 762.904542] [] ? printk+0x18/0x1d [ 762.904542] [] valid_state+0x1f6/0x201 [ 762.904542] [] mark_lock+0xd1/0x1bb [ 762.904542] [] ? mark_lock+0x26/0x1bb [ 762.904542] [] ? check_usage_forwards+0x77/0x77 [ 762.904542] [] __lock_acquire+0x2f8/0xc26 [ 762.904542] [] ? mark_held_locks+0x5d/0x7b [ 762.904542] [] ? trace_hardirqs_on+0xb/0xd [ 762.904542] [] ? __lock_acquire+0x4d4/0xc26 [ 762.904542] [] lock_acquire+0x71/0x85 [ 762.904542] [] ? __percpu_counter_sum+0xd/0x58 [ 762.904542] [] _raw_spin_lock+0x33/0x40 [ 762.904542] [] ? __percpu_counter_sum+0xd/0x58 [ 762.904542] [] __percpu_counter_sum+0xd/0x58 [ 762.904542] [] __sk_mem_schedule+0xdd/0x1c7 [ 762.904542] [] ? __alloc_skb+0x76/0x100 [ 762.904542] [] sk_wmem_schedule+0x21/0x2d [ 762.904542] [] sk_stream_alloc_skb+0x42/0xaa [ 762.904542] [] tcp_sendmsg+0x18f/0x68b [ 762.904542] [] ? ip_fast_csum+0x30/0x30 [ 762.904542] [] inet_sendmsg+0x53/0x5a [ 762.904542] [] sock_aio_write+0xd2/0xda [ 762.904542] [] ? mark_lock+0x26/0x1bb [ 762.904542] [] do_sync_write+0x9f/0xd9 [ 762.904542] [] ? file_free_rcu+0x2f/0x2f [ 762.904542] [] vfs_write+0x8f/0xab [ 762.904542] [] ? fget_light+0x75/0x7c [ 762.904542] [] sys_write+0x3d/0x5e [ 762.904542] [] syscall_call+0x7/0xb [ 762.904542] [] ? rp_sidt+0x41/0x83 Bug is that sk_sockets_allocated_read_positive() calls percpu_counter_sum_positive() without BH being disabled. This bug was added in commit 180d8cd942ce33 (foundations of per-cgroup memory pressure controlling.), since previous code was using percpu_counter_read_positive() which is IRQ safe. In __sk_mem_schedule() we dont need the precise count of allocated sockets and can revert to previous behavior. Reported-by: Denys Fedoryshchenko Sined-off-by: Eric Dumazet Cc: Glauber Costa Acked-by: Neal Cardwell Signed-off-by: David S. Miller --- include/net/sock.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/net/sock.h b/include/net/sock.h index 188532ee88b6..5a0a58ac4126 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -1129,9 +1129,9 @@ sk_sockets_allocated_read_positive(struct sock *sk) struct proto *prot = sk->sk_prot; if (mem_cgroup_sockets_enabled && sk->sk_cgrp) - return percpu_counter_sum_positive(sk->sk_cgrp->sockets_allocated); + return percpu_counter_read_positive(sk->sk_cgrp->sockets_allocated); - return percpu_counter_sum_positive(prot->sockets_allocated); + return percpu_counter_read_positive(prot->sockets_allocated); } static inline int From 05be18241e83d2ac6b656c8f924e74b3998c173f Mon Sep 17 00:00:00 2001 From: Jan Seiffert Date: Sun, 29 Apr 2012 19:02:19 +0000 Subject: [PATCH 312/365] bpf jit: Let the powerpc jit handle negative offsets Now the helper function from filter.c for negative offsets is exported, it can be used it in the jit to handle negative offsets. First modify the asm load helper functions to handle: - know positive offsets - know negative offsets - any offset then the compiler can be modified to explicitly use these helper when appropriate. This fixes the case of a negative X register and allows to lift the restriction that bpf programs with negative offsets can't be jited. Tested-by: Benjamin Herrenschmidt Signed-off-by: Jan Seiffert Signed-off-by: David S. Miller --- arch/powerpc/net/bpf_jit.h | 8 ++- arch/powerpc/net/bpf_jit_64.S | 108 ++++++++++++++++++++++++++++---- arch/powerpc/net/bpf_jit_comp.c | 26 +++----- 3 files changed, 111 insertions(+), 31 deletions(-) diff --git a/arch/powerpc/net/bpf_jit.h b/arch/powerpc/net/bpf_jit.h index af1ab5e9a691..5c3cf2d04e41 100644 --- a/arch/powerpc/net/bpf_jit.h +++ b/arch/powerpc/net/bpf_jit.h @@ -48,7 +48,13 @@ /* * Assembly helpers from arch/powerpc/net/bpf_jit.S: */ -extern u8 sk_load_word[], sk_load_half[], sk_load_byte[], sk_load_byte_msh[]; +#define DECLARE_LOAD_FUNC(func) \ + extern u8 func[], func##_negative_offset[], func##_positive_offset[] + +DECLARE_LOAD_FUNC(sk_load_word); +DECLARE_LOAD_FUNC(sk_load_half); +DECLARE_LOAD_FUNC(sk_load_byte); +DECLARE_LOAD_FUNC(sk_load_byte_msh); #define FUNCTION_DESCR_SIZE 24 diff --git a/arch/powerpc/net/bpf_jit_64.S b/arch/powerpc/net/bpf_jit_64.S index ff4506e85cce..55ba3855a97f 100644 --- a/arch/powerpc/net/bpf_jit_64.S +++ b/arch/powerpc/net/bpf_jit_64.S @@ -31,14 +31,13 @@ * then branch directly to slow_path_XXX if required. (In fact, could * load a spare GPR with the address of slow_path_generic and pass size * as an argument, making the call site a mtlr, li and bllr.) - * - * Technically, the "is addr < 0" check is unnecessary & slowing down - * the ABS path, as it's statically checked on generation. */ .globl sk_load_word sk_load_word: cmpdi r_addr, 0 - blt bpf_error + blt bpf_slow_path_word_neg + .globl sk_load_word_positive_offset +sk_load_word_positive_offset: /* Are we accessing past headlen? */ subi r_scratch1, r_HL, 4 cmpd r_scratch1, r_addr @@ -51,7 +50,9 @@ sk_load_word: .globl sk_load_half sk_load_half: cmpdi r_addr, 0 - blt bpf_error + blt bpf_slow_path_half_neg + .globl sk_load_half_positive_offset +sk_load_half_positive_offset: subi r_scratch1, r_HL, 2 cmpd r_scratch1, r_addr blt bpf_slow_path_half @@ -61,7 +62,9 @@ sk_load_half: .globl sk_load_byte sk_load_byte: cmpdi r_addr, 0 - blt bpf_error + blt bpf_slow_path_byte_neg + .globl sk_load_byte_positive_offset +sk_load_byte_positive_offset: cmpd r_HL, r_addr ble bpf_slow_path_byte lbzx r_A, r_D, r_addr @@ -69,22 +72,20 @@ sk_load_byte: /* * BPF_S_LDX_B_MSH: ldxb 4*([offset]&0xf) - * r_addr is the offset value, already known positive + * r_addr is the offset value */ .globl sk_load_byte_msh sk_load_byte_msh: + cmpdi r_addr, 0 + blt bpf_slow_path_byte_msh_neg + .globl sk_load_byte_msh_positive_offset +sk_load_byte_msh_positive_offset: cmpd r_HL, r_addr ble bpf_slow_path_byte_msh lbzx r_X, r_D, r_addr rlwinm r_X, r_X, 2, 32-4-2, 31-2 blr -bpf_error: - /* Entered with cr0 = lt */ - li r3, 0 - /* Generated code will 'blt epilogue', returning 0. */ - blr - /* Call out to skb_copy_bits: * We'll need to back up our volatile regs first; we have * local variable space at r1+(BPF_PPC_STACK_BASIC). @@ -136,3 +137,84 @@ bpf_slow_path_byte_msh: lbz r_X, BPF_PPC_STACK_BASIC+(2*8)(r1) rlwinm r_X, r_X, 2, 32-4-2, 31-2 blr + +/* Call out to bpf_internal_load_pointer_neg_helper: + * We'll need to back up our volatile regs first; we have + * local variable space at r1+(BPF_PPC_STACK_BASIC). + * Allocate a new stack frame here to remain ABI-compliant in + * stashing LR. + */ +#define sk_negative_common(SIZE) \ + mflr r0; \ + std r0, 16(r1); \ + /* R3 goes in parameter space of caller's frame */ \ + std r_skb, (BPF_PPC_STACKFRAME+48)(r1); \ + std r_A, (BPF_PPC_STACK_BASIC+(0*8))(r1); \ + std r_X, (BPF_PPC_STACK_BASIC+(1*8))(r1); \ + stdu r1, -BPF_PPC_SLOWPATH_FRAME(r1); \ + /* R3 = r_skb, as passed */ \ + mr r4, r_addr; \ + li r5, SIZE; \ + bl bpf_internal_load_pointer_neg_helper; \ + /* R3 != 0 on success */ \ + addi r1, r1, BPF_PPC_SLOWPATH_FRAME; \ + ld r0, 16(r1); \ + ld r_A, (BPF_PPC_STACK_BASIC+(0*8))(r1); \ + ld r_X, (BPF_PPC_STACK_BASIC+(1*8))(r1); \ + mtlr r0; \ + cmpldi r3, 0; \ + beq bpf_error_slow; /* cr0 = EQ */ \ + mr r_addr, r3; \ + ld r_skb, (BPF_PPC_STACKFRAME+48)(r1); \ + /* Great success! */ + +bpf_slow_path_word_neg: + lis r_scratch1,-32 /* SKF_LL_OFF */ + cmpd r_addr, r_scratch1 /* addr < SKF_* */ + blt bpf_error /* cr0 = LT */ + .globl sk_load_word_negative_offset +sk_load_word_negative_offset: + sk_negative_common(4) + lwz r_A, 0(r_addr) + blr + +bpf_slow_path_half_neg: + lis r_scratch1,-32 /* SKF_LL_OFF */ + cmpd r_addr, r_scratch1 /* addr < SKF_* */ + blt bpf_error /* cr0 = LT */ + .globl sk_load_half_negative_offset +sk_load_half_negative_offset: + sk_negative_common(2) + lhz r_A, 0(r_addr) + blr + +bpf_slow_path_byte_neg: + lis r_scratch1,-32 /* SKF_LL_OFF */ + cmpd r_addr, r_scratch1 /* addr < SKF_* */ + blt bpf_error /* cr0 = LT */ + .globl sk_load_byte_negative_offset +sk_load_byte_negative_offset: + sk_negative_common(1) + lbz r_A, 0(r_addr) + blr + +bpf_slow_path_byte_msh_neg: + lis r_scratch1,-32 /* SKF_LL_OFF */ + cmpd r_addr, r_scratch1 /* addr < SKF_* */ + blt bpf_error /* cr0 = LT */ + .globl sk_load_byte_msh_negative_offset +sk_load_byte_msh_negative_offset: + sk_negative_common(1) + lbz r_X, 0(r_addr) + rlwinm r_X, r_X, 2, 32-4-2, 31-2 + blr + +bpf_error_slow: + /* fabricate a cr0 = lt */ + li r_scratch1, -1 + cmpdi r_scratch1, 0 +bpf_error: + /* Entered with cr0 = lt */ + li r3, 0 + /* Generated code will 'blt epilogue', returning 0. */ + blr diff --git a/arch/powerpc/net/bpf_jit_comp.c b/arch/powerpc/net/bpf_jit_comp.c index 73619d3aeb6c..2dc8b1484845 100644 --- a/arch/powerpc/net/bpf_jit_comp.c +++ b/arch/powerpc/net/bpf_jit_comp.c @@ -127,6 +127,9 @@ static void bpf_jit_build_epilogue(u32 *image, struct codegen_context *ctx) PPC_BLR(); } +#define CHOOSE_LOAD_FUNC(K, func) \ + ((int)K < 0 ? ((int)K >= SKF_LL_OFF ? func##_negative_offset : func) : func##_positive_offset) + /* Assemble the body code between the prologue & epilogue. */ static int bpf_jit_build_body(struct sk_filter *fp, u32 *image, struct codegen_context *ctx, @@ -391,21 +394,16 @@ static int bpf_jit_build_body(struct sk_filter *fp, u32 *image, /*** Absolute loads from packet header/data ***/ case BPF_S_LD_W_ABS: - func = sk_load_word; + func = CHOOSE_LOAD_FUNC(K, sk_load_word); goto common_load; case BPF_S_LD_H_ABS: - func = sk_load_half; + func = CHOOSE_LOAD_FUNC(K, sk_load_half); goto common_load; case BPF_S_LD_B_ABS: - func = sk_load_byte; + func = CHOOSE_LOAD_FUNC(K, sk_load_byte); common_load: - /* - * Load from [K]. Reference with the (negative) - * SKF_NET_OFF/SKF_LL_OFF offsets is unsupported. - */ + /* Load from [K]. */ ctx->seen |= SEEN_DATAREF; - if ((int)K < 0) - return -ENOTSUPP; PPC_LI64(r_scratch1, func); PPC_MTLR(r_scratch1); PPC_LI32(r_addr, K); @@ -429,7 +427,7 @@ static int bpf_jit_build_body(struct sk_filter *fp, u32 *image, common_load_ind: /* * Load from [X + K]. Negative offsets are tested for - * in the helper functions, and result in a 'ret 0'. + * in the helper functions. */ ctx->seen |= SEEN_DATAREF | SEEN_XREG; PPC_LI64(r_scratch1, func); @@ -443,13 +441,7 @@ static int bpf_jit_build_body(struct sk_filter *fp, u32 *image, break; case BPF_S_LDX_B_MSH: - /* - * x86 version drops packet (RET 0) when K<0, whereas - * interpreter does allow K<0 (__load_pointer, special - * ancillary data). common_load returns ENOTSUPP if K<0, - * so we fall back to interpreter & filter works. - */ - func = sk_load_byte_msh; + func = CHOOSE_LOAD_FUNC(K, sk_load_byte_msh); goto common_load; break; From 1cebce36d660c83bd1353e41f3e66abd4686f215 Mon Sep 17 00:00:00 2001 From: Yuchung Cheng Date: Mon, 30 Apr 2012 06:00:18 +0000 Subject: [PATCH 313/365] tcp: fix infinite cwnd in tcp_complete_cwr() When the cwnd reduction is done, ssthresh may be infinite if TCP enters CWR via ECN or F-RTO. If cwnd is not undone, i.e., undo_marker is set, tcp_complete_cwr() falsely set cwnd to the infinite ssthresh value. The correct operation is to keep cwnd intact because it has been updated in ECN or F-RTO. Signed-off-by: Yuchung Cheng Acked-by: Neal Cardwell Signed-off-by: David S. Miller --- net/ipv4/tcp_input.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 2a702e3a4ae6..d99efd7dfb6c 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -2868,11 +2868,14 @@ static inline void tcp_complete_cwr(struct sock *sk) /* Do not moderate cwnd if it's already undone in cwr or recovery. */ if (tp->undo_marker) { - if (inet_csk(sk)->icsk_ca_state == TCP_CA_CWR) + if (inet_csk(sk)->icsk_ca_state == TCP_CA_CWR) { tp->snd_cwnd = min(tp->snd_cwnd, tp->snd_ssthresh); - else /* PRR */ + tp->snd_cwnd_stamp = tcp_time_stamp; + } else if (tp->snd_ssthresh < TCP_INFINITE_SSTHRESH) { + /* PRR algorithm. */ tp->snd_cwnd = tp->snd_ssthresh; - tp->snd_cwnd_stamp = tcp_time_stamp; + tp->snd_cwnd_stamp = tcp_time_stamp; + } } tcp_ca_event(sk, CA_EVENT_COMPLETE_CWR); } From 66f2c99af3d6f2d0aa1120884cf1c60613ef61c0 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sun, 29 Apr 2012 15:44:16 +0200 Subject: [PATCH 314/365] mac80211: fix AP mode EAP tx for VLAN stations EAP frames for stations in an AP VLAN are sent on the main AP interface to avoid race conditions wrt. moving stations. For that to work properly, sta_info_get_bss must be used instead of sta_info_get when sending EAP packets. Previously this was only done for cooked monitor injected packets, so this patch adds a check for tx->skb->protocol to the same place. Signed-off-by: Felix Fietkau Cc: stable@vger.kernel.org Signed-off-by: John W. Linville --- net/mac80211/tx.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 782a60198df4..e76facc69e95 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -1158,7 +1158,8 @@ ieee80211_tx_prepare(struct ieee80211_sub_if_data *sdata, tx->sta = rcu_dereference(sdata->u.vlan.sta); if (!tx->sta && sdata->dev->ieee80211_ptr->use_4addr) return TX_DROP; - } else if (info->flags & IEEE80211_TX_CTL_INJECTED) { + } else if (info->flags & IEEE80211_TX_CTL_INJECTED || + tx->sdata->control_port_protocol == tx->skb->protocol) { tx->sta = sta_info_get_bss(sdata, hdr->addr1); } if (!tx->sta) From 8a7dc4b04b22be285ea5bef7d01a02f91e30d562 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 30 Apr 2012 12:25:31 -0700 Subject: [PATCH 315/365] nfsd: fix nfs4recover.c printk format warning Fix printk format warnings -- both items are size_t, so use %zu to print them. fs/nfsd/nfs4recover.c:580:3: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'size_t' fs/nfsd/nfs4recover.c:580:3: warning: format '%lu' expects type 'long unsigned int', but argument 4 has type 'unsigned int' Signed-off-by: Randy Dunlap Cc: "J. Bruce Fields" Cc: linux-nfs@vger.kernel.org Signed-off-by: Linus Torvalds --- fs/nfsd/nfs4recover.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/nfsd/nfs4recover.c b/fs/nfsd/nfs4recover.c index 4767429264a2..ed3f9206a0ee 100644 --- a/fs/nfsd/nfs4recover.c +++ b/fs/nfsd/nfs4recover.c @@ -577,7 +577,7 @@ cld_pipe_downcall(struct file *filp, const char __user *src, size_t mlen) struct cld_net *cn = nn->cld_net; if (mlen != sizeof(*cmsg)) { - dprintk("%s: got %lu bytes, expected %lu\n", __func__, mlen, + dprintk("%s: got %zu bytes, expected %zu\n", __func__, mlen, sizeof(*cmsg)); return -EINVAL; } From 41b3254c93acc56adc3c4477fef7c9512d47659e Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Mon, 30 Apr 2012 16:11:29 -0400 Subject: [PATCH 316/365] efi: Add new variable attributes More recent versions of the UEFI spec have added new attributes for variables. Add them. Signed-off-by: Matthew Garrett Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds --- include/linux/efi.h | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/include/linux/efi.h b/include/linux/efi.h index 88ec80670d5f..ec45ccd8708a 100644 --- a/include/linux/efi.h +++ b/include/linux/efi.h @@ -554,7 +554,18 @@ extern int __init efi_setup_pcdp_console(char *); #define EFI_VARIABLE_NON_VOLATILE 0x0000000000000001 #define EFI_VARIABLE_BOOTSERVICE_ACCESS 0x0000000000000002 #define EFI_VARIABLE_RUNTIME_ACCESS 0x0000000000000004 +#define EFI_VARIABLE_HARDWARE_ERROR_RECORD 0x0000000000000008 +#define EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS 0x0000000000000010 +#define EFI_VARIABLE_TIME_BASED_AUTHENTICATED_WRITE_ACCESS 0x0000000000000020 +#define EFI_VARIABLE_APPEND_WRITE 0x0000000000000040 +#define EFI_VARIABLE_MASK (EFI_VARIABLE_NON_VOLATILE | \ + EFI_VARIABLE_BOOTSERVICE_ACCESS | \ + EFI_VARIABLE_RUNTIME_ACCESS | \ + EFI_VARIABLE_HARDWARE_ERROR_RECORD | \ + EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS | \ + EFI_VARIABLE_TIME_BASED_AUTHENTICATED_WRITE_ACCESS | \ + EFI_VARIABLE_APPEND_WRITE) /* * The type of search to perform when calling boottime->locate_handle */ From fec6c20b570bcf541e581fc97f2e0cbdb9725b98 Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Mon, 30 Apr 2012 16:11:30 -0400 Subject: [PATCH 317/365] efi: Validate UEFI boot variables A common flaw in UEFI systems is a refusal to POST triggered by a malformed boot variable. Once in this state, machines may only be restored by reflashing their firmware with an external hardware device. While this is obviously a firmware bug, the serious nature of the outcome suggests that operating systems should filter their variable writes in order to prevent a malicious user from rendering the machine unusable. Signed-off-by: Matthew Garrett Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds --- drivers/firmware/efivars.c | 182 +++++++++++++++++++++++++++++++++++++ 1 file changed, 182 insertions(+) diff --git a/drivers/firmware/efivars.c b/drivers/firmware/efivars.c index d25599f2a3f8..891e4674d29b 100644 --- a/drivers/firmware/efivars.c +++ b/drivers/firmware/efivars.c @@ -191,6 +191,176 @@ utf16_strncmp(const efi_char16_t *a, const efi_char16_t *b, size_t len) } } +static bool +validate_device_path(struct efi_variable *var, int match, u8 *buffer, int len) +{ + struct efi_generic_dev_path *node; + int offset = 0; + + node = (struct efi_generic_dev_path *)buffer; + + while (offset < len) { + offset += node->length; + + if (offset > len) + return false; + + if ((node->type == EFI_DEV_END_PATH || + node->type == EFI_DEV_END_PATH2) && + node->sub_type == EFI_DEV_END_ENTIRE) + return true; + + node = (struct efi_generic_dev_path *)(buffer + offset); + } + + /* + * If we're here then either node->length pointed past the end + * of the buffer or we reached the end of the buffer without + * finding a device path end node. + */ + return false; +} + +static bool +validate_boot_order(struct efi_variable *var, int match, u8 *buffer, int len) +{ + /* An array of 16-bit integers */ + if ((len % 2) != 0) + return false; + + return true; +} + +static bool +validate_load_option(struct efi_variable *var, int match, u8 *buffer, int len) +{ + u16 filepathlength; + int i, desclength = 0; + + /* Either "Boot" or "Driver" followed by four digits of hex */ + for (i = match; i < match+4; i++) { + if (hex_to_bin(var->VariableName[i] & 0xff) < 0) + return true; + } + + /* A valid entry must be at least 6 bytes */ + if (len < 6) + return false; + + filepathlength = buffer[4] | buffer[5] << 8; + + /* + * There's no stored length for the description, so it has to be + * found by hand + */ + desclength = utf16_strsize((efi_char16_t *)(buffer + 6), len) + 2; + + /* Each boot entry must have a descriptor */ + if (!desclength) + return false; + + /* + * If the sum of the length of the description, the claimed filepath + * length and the original header are greater than the length of the + * variable, it's malformed + */ + if ((desclength + filepathlength + 6) > len) + return false; + + /* + * And, finally, check the filepath + */ + return validate_device_path(var, match, buffer + desclength + 6, + filepathlength); +} + +static bool +validate_uint16(struct efi_variable *var, int match, u8 *buffer, int len) +{ + /* A single 16-bit integer */ + if (len != 2) + return false; + + return true; +} + +static bool +validate_ascii_string(struct efi_variable *var, int match, u8 *buffer, int len) +{ + int i; + + for (i = 0; i < len; i++) { + if (buffer[i] > 127) + return false; + + if (buffer[i] == 0) + return true; + } + + return false; +} + +struct variable_validate { + char *name; + bool (*validate)(struct efi_variable *var, int match, u8 *data, + int len); +}; + +static const struct variable_validate variable_validate[] = { + { "BootNext", validate_uint16 }, + { "BootOrder", validate_boot_order }, + { "DriverOrder", validate_boot_order }, + { "Boot*", validate_load_option }, + { "Driver*", validate_load_option }, + { "ConIn", validate_device_path }, + { "ConInDev", validate_device_path }, + { "ConOut", validate_device_path }, + { "ConOutDev", validate_device_path }, + { "ErrOut", validate_device_path }, + { "ErrOutDev", validate_device_path }, + { "Timeout", validate_uint16 }, + { "Lang", validate_ascii_string }, + { "PlatformLang", validate_ascii_string }, + { "", NULL }, +}; + +static bool +validate_var(struct efi_variable *var, u8 *data, int len) +{ + int i; + u16 *unicode_name = var->VariableName; + + for (i = 0; variable_validate[i].validate != NULL; i++) { + const char *name = variable_validate[i].name; + int match; + + for (match = 0; ; match++) { + char c = name[match]; + u16 u = unicode_name[match]; + + /* All special variables are plain ascii */ + if (u > 127) + return true; + + /* Wildcard in the matching name means we've matched */ + if (c == '*') + return variable_validate[i].validate(var, + match, data, len); + + /* Case sensitive match */ + if (c != u) + break; + + /* Reached the end of the string while matching */ + if (!c) + return variable_validate[i].validate(var, + match, data, len); + } + } + + return true; +} + static efi_status_t get_var_data_locked(struct efivars *efivars, struct efi_variable *var) { @@ -324,6 +494,12 @@ efivar_store_raw(struct efivar_entry *entry, const char *buf, size_t count) return -EINVAL; } + if ((new_var->Attributes & ~EFI_VARIABLE_MASK) != 0 || + validate_var(new_var, new_var->Data, new_var->DataSize) == false) { + printk(KERN_ERR "efivars: Malformed variable content\n"); + return -EINVAL; + } + spin_lock(&efivars->lock); status = efivars->ops->set_variable(new_var->VariableName, &new_var->VendorGuid, @@ -626,6 +802,12 @@ static ssize_t efivar_create(struct file *filp, struct kobject *kobj, if (!capable(CAP_SYS_ADMIN)) return -EACCES; + if ((new_var->Attributes & ~EFI_VARIABLE_MASK) != 0 || + validate_var(new_var, new_var->Data, new_var->DataSize) == false) { + printk(KERN_ERR "efivars: Malformed variable content\n"); + return -EINVAL; + } + spin_lock(&efivars->lock); /* From 7bdd305e024d78cfb4f32a1badeb5562791ee5b8 Mon Sep 17 00:00:00 2001 From: Steve Glendinning Date: Mon, 30 Apr 2012 07:56:50 +0000 Subject: [PATCH 318/365] smsc75xx: mark link down on startup and let PHY interrupt deal with carrier changes This patch fixes the same issue as reported on smsc95xx, where the usb device is connected with no ethernet cable plugged-in. Without this patch sysfs reports the cable as present flag@flag-desktop:~$ cat /sys/class/net/eth0/carrier 1 while it's not: flag@flag-desktop:~$ sudo mii-tool eth0 eth0: no link Signed-off-by: Steve Glendinning Signed-off-by: David S. Miller --- drivers/net/usb/smsc75xx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c index a2349483cd2a..b1b4649802aa 100644 --- a/drivers/net/usb/smsc75xx.c +++ b/drivers/net/usb/smsc75xx.c @@ -1212,7 +1212,7 @@ static const struct driver_info smsc75xx_info = { .rx_fixup = smsc75xx_rx_fixup, .tx_fixup = smsc75xx_tx_fixup, .status = smsc75xx_status, - .flags = FLAG_ETHER | FLAG_SEND_ZLP, + .flags = FLAG_ETHER | FLAG_SEND_ZLP | FLAG_LINK_INTR, }; static const struct usb_device_id products[] = { From cb8722d30c20386e4d4b4bc3a2ceceacd35f818a Mon Sep 17 00:00:00 2001 From: Steve Glendinning Date: Mon, 30 Apr 2012 07:56:51 +0000 Subject: [PATCH 319/365] smsc75xx: fix mdio reads and writes smsc75xx needs MII_ACCESS_BUSY to be set to correctly trigger mdio I/O. Note smsc75xx is different from smsc95xx in this regard. Signed-off-by: Stephane Fillod Signed-off-by: Steve Glendinning Signed-off-by: David S. Miller --- drivers/net/usb/smsc75xx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c index b1b4649802aa..f97207a709d6 100644 --- a/drivers/net/usb/smsc75xx.c +++ b/drivers/net/usb/smsc75xx.c @@ -171,7 +171,7 @@ static int smsc75xx_mdio_read(struct net_device *netdev, int phy_id, int idx) idx &= dev->mii.reg_num_mask; addr = ((phy_id << MII_ACCESS_PHY_ADDR_SHIFT) & MII_ACCESS_PHY_ADDR) | ((idx << MII_ACCESS_REG_ADDR_SHIFT) & MII_ACCESS_REG_ADDR) - | MII_ACCESS_READ; + | MII_ACCESS_READ | MII_ACCESS_BUSY; ret = smsc75xx_write_reg(dev, MII_ACCESS, addr); check_warn_goto_done(ret, "Error writing MII_ACCESS"); @@ -210,7 +210,7 @@ static void smsc75xx_mdio_write(struct net_device *netdev, int phy_id, int idx, idx &= dev->mii.reg_num_mask; addr = ((phy_id << MII_ACCESS_PHY_ADDR_SHIFT) & MII_ACCESS_PHY_ADDR) | ((idx << MII_ACCESS_REG_ADDR_SHIFT) & MII_ACCESS_REG_ADDR) - | MII_ACCESS_WRITE; + | MII_ACCESS_WRITE | MII_ACCESS_BUSY; ret = smsc75xx_write_reg(dev, MII_ACCESS, addr); check_warn_goto_done(ret, "Error writing MII_ACCESS"); From 4f49add9ad297dab392c14dc60d490364080739b Mon Sep 17 00:00:00 2001 From: Steve Glendinning Date: Mon, 30 Apr 2012 07:56:52 +0000 Subject: [PATCH 320/365] smsc75xx: add more information to register io failure warnings Signed-off-by: Stephane Fillod Signed-off-by: Steve Glendinning Signed-off-by: David S. Miller --- drivers/net/usb/smsc75xx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c index f97207a709d6..1de778527813 100644 --- a/drivers/net/usb/smsc75xx.c +++ b/drivers/net/usb/smsc75xx.c @@ -98,7 +98,7 @@ static int __must_check smsc75xx_read_reg(struct usbnet *dev, u32 index, if (unlikely(ret < 0)) netdev_warn(dev->net, - "Failed to read register index 0x%08x", index); + "Failed to read reg index 0x%08x: %d", index, ret); le32_to_cpus(buf); *data = *buf; @@ -128,7 +128,7 @@ static int __must_check smsc75xx_write_reg(struct usbnet *dev, u32 index, if (unlikely(ret < 0)) netdev_warn(dev->net, - "Failed to write register index 0x%08x", index); + "Failed to write reg index 0x%08x: %d", index, ret); kfree(buf); From 8a1d59d79fffdad4bb1b3b5d069da4c6c52db2e6 Mon Sep 17 00:00:00 2001 From: Steve Glendinning Date: Mon, 30 Apr 2012 07:56:53 +0000 Subject: [PATCH 321/365] smsc75xx: fix phy init reset loop fix bug in phy_init loop that was ignoring BMCR reset bit, akin to smsc95xx's d946092000698fd204d82a9d239103c656fb63bf Signed-off-by: Stephane Fillod Signed-off-by: Steve Glendinning Signed-off-by: David S. Miller --- drivers/net/usb/smsc75xx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c index 1de778527813..cc23a589e40f 100644 --- a/drivers/net/usb/smsc75xx.c +++ b/drivers/net/usb/smsc75xx.c @@ -661,7 +661,7 @@ static int smsc75xx_phy_initialize(struct usbnet *dev) bmcr = smsc75xx_mdio_read(dev->net, dev->mii.phy_id, MII_BMCR); check_warn_return(bmcr, "Error reading MII_BMCR"); timeout++; - } while ((bmcr & MII_BMCR) && (timeout < 100)); + } while ((bmcr & BMCR_RESET) && (timeout < 100)); if (timeout >= 100) { netdev_warn(dev->net, "timeout on PHY Reset"); From b140504aa3903feaba6f6bc77a4478a944fc12d2 Mon Sep 17 00:00:00 2001 From: Steve Glendinning Date: Mon, 30 Apr 2012 07:56:54 +0000 Subject: [PATCH 322/365] smsc75xx: fix phy interrupt acknowledge smsc75xx phy interrupt acknowledge needs an mdio_write to clear PHY_INT_SRC instead of just a read like in smsc95xx. Signed-off-by: Stephane Fillod Signed-off-by: Steve Glendinning Signed-off-by: David S. Miller --- drivers/net/usb/smsc75xx.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c index cc23a589e40f..4941782358ef 100644 --- a/drivers/net/usb/smsc75xx.c +++ b/drivers/net/usb/smsc75xx.c @@ -508,9 +508,10 @@ static int smsc75xx_link_reset(struct usbnet *dev) u16 lcladv, rmtadv; int ret; - /* clear interrupt status */ + /* read and write to clear phy interrupt status */ ret = smsc75xx_mdio_read(dev->net, mii->phy_id, PHY_INT_SRC); check_warn_return(ret, "Error reading PHY_INT_SRC"); + smsc75xx_mdio_write(dev->net, mii->phy_id, PHY_INT_SRC, 0xffff); ret = smsc75xx_write_reg(dev, INT_STS, INT_STS_CLEAR_ALL); check_warn_return(ret, "Error writing INT_STS"); @@ -643,7 +644,7 @@ static int smsc75xx_set_mac_address(struct usbnet *dev) static int smsc75xx_phy_initialize(struct usbnet *dev) { - int bmcr, timeout = 0; + int bmcr, ret, timeout = 0; /* Initialize MII structure */ dev->mii.dev = dev->net; @@ -672,9 +673,10 @@ static int smsc75xx_phy_initialize(struct usbnet *dev) ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM); - /* read to clear */ - smsc75xx_mdio_read(dev->net, dev->mii.phy_id, PHY_INT_SRC); - check_warn_return(bmcr, "Error reading PHY_INT_SRC"); + /* read and write to clear phy interrupt status */ + ret = smsc75xx_mdio_read(dev->net, dev->mii.phy_id, PHY_INT_SRC); + check_warn_return(ret, "Error reading PHY_INT_SRC"); + smsc75xx_mdio_write(dev->net, dev->mii.phy_id, PHY_INT_SRC, 0xffff); smsc75xx_mdio_write(dev->net, dev->mii.phy_id, PHY_INT_MASK, PHY_INT_MASK_DEFAULT); From c0b92e4d44ecaab3cd3f09f9f905306a5989b0d4 Mon Sep 17 00:00:00 2001 From: Steve Glendinning Date: Mon, 30 Apr 2012 07:56:55 +0000 Subject: [PATCH 323/365] smsc75xx: declare smsc75xx's MII as GMII capable also explicitly set the phy to advertise 1000 speeds Signed-off-by: Stephane Fillod Signed-off-by: Steve Glendinning Signed-off-by: David S. Miller --- drivers/net/usb/smsc75xx.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c index 4941782358ef..ae23d85a973a 100644 --- a/drivers/net/usb/smsc75xx.c +++ b/drivers/net/usb/smsc75xx.c @@ -652,6 +652,7 @@ static int smsc75xx_phy_initialize(struct usbnet *dev) dev->mii.mdio_write = smsc75xx_mdio_write; dev->mii.phy_id_mask = 0x1f; dev->mii.reg_num_mask = 0x1f; + dev->mii.supports_gmii = 1; dev->mii.phy_id = SMSC75XX_INTERNAL_PHY_ID; /* reset phy and wait for reset to complete */ @@ -672,6 +673,8 @@ static int smsc75xx_phy_initialize(struct usbnet *dev) smsc75xx_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE, ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM); + smsc75xx_mdio_write(dev->net, dev->mii.phy_id, MII_CTRL1000, + ADVERTISE_1000FULL); /* read and write to clear phy interrupt status */ ret = smsc75xx_mdio_read(dev->net, dev->mii.phy_id, PHY_INT_SRC); From 2f3a081ea2f63cd5b3e549a0040c760d87483f99 Mon Sep 17 00:00:00 2001 From: Steve Glendinning Date: Mon, 30 Apr 2012 07:56:56 +0000 Subject: [PATCH 324/365] smsc75xx: enable mac to detect speed/duplex from phy This patch sets the automatic speed and duplex detection bits in MAC_CR to enable the mac to determine its speed automatically from the phy. Note this must be done BEFORE the receiver or transmitter is enabled. Signed-off-by: Stephane Fillod Signed-off-by: Steve Glendinning Signed-off-by: David S. Miller --- drivers/net/usb/smsc75xx.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/net/usb/smsc75xx.c b/drivers/net/usb/smsc75xx.c index ae23d85a973a..00103a8c5e04 100644 --- a/drivers/net/usb/smsc75xx.c +++ b/drivers/net/usb/smsc75xx.c @@ -951,6 +951,14 @@ static int smsc75xx_reset(struct usbnet *dev) ret = smsc75xx_write_reg(dev, INT_EP_CTL, buf); check_warn_return(ret, "Failed to write INT_EP_CTL: %d", ret); + /* allow mac to detect speed and duplex from phy */ + ret = smsc75xx_read_reg(dev, MAC_CR, &buf); + check_warn_return(ret, "Failed to read MAC_CR: %d", ret); + + buf |= (MAC_CR_ADD | MAC_CR_ASD); + ret = smsc75xx_write_reg(dev, MAC_CR, buf); + check_warn_return(ret, "Failed to write MAC_CR: %d", ret); + ret = smsc75xx_read_reg(dev, MAC_TX, &buf); check_warn_return(ret, "Failed to read MAC_TX: %d", ret); From 9bd1be457d2b9568c3c8f8f6b8e450a501bff402 Mon Sep 17 00:00:00 2001 From: Samuel Liao Date: Fri, 27 Apr 2012 17:09:27 +0000 Subject: [PATCH 325/365] igbvf: fix the bug when initializing the igbvf Maybe it's a typo, but it cause that igbvf can't be initialized successfully. Set perm_addr value using valid dev_addr, although which is equal to hw.mac.addr. Signed-off-by: Samuel Liao Signed-off-by: Shan Wei Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/igbvf/netdev.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/intel/igbvf/netdev.c b/drivers/net/ethernet/intel/igbvf/netdev.c index d61ca2a732f0..8ec74b07f940 100644 --- a/drivers/net/ethernet/intel/igbvf/netdev.c +++ b/drivers/net/ethernet/intel/igbvf/netdev.c @@ -2731,14 +2731,14 @@ static int __devinit igbvf_probe(struct pci_dev *pdev, netdev->addr_len); } - if (!is_valid_ether_addr(netdev->perm_addr)) { + if (!is_valid_ether_addr(netdev->dev_addr)) { dev_err(&pdev->dev, "Invalid MAC Address: %pM\n", netdev->dev_addr); err = -EIO; goto err_hw_init; } - memcpy(netdev->perm_addr, adapter->hw.mac.addr, netdev->addr_len); + memcpy(netdev->perm_addr, netdev->dev_addr, netdev->addr_len); setup_timer(&adapter->watchdog_timer, &igbvf_watchdog, (unsigned long) adapter); From 2b1588c3fafc3fd2b3bc49202a380eaecbbc2193 Mon Sep 17 00:00:00 2001 From: Alexander Duyck Date: Sat, 17 Mar 2012 02:39:16 +0000 Subject: [PATCH 326/365] ixgbe: Fix a memory leak in IEEE DCB The driver was freeing memory in shutdown instead of remove. As a result we were leaking memory if IEEE DCB was enabled and we loaded/unloaded the driver. This change moves the freeing of the memory into the remove routine where it belongs. Signed-off-by: Alexander Duyck Acked-by: John Fastabend Tested-by: Ross Brattain Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index a7f3cd872caf..88f6b2e9b72d 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -4873,10 +4873,6 @@ static int __ixgbe_shutdown(struct pci_dev *pdev, bool *enable_wake) } ixgbe_clear_interrupt_scheme(adapter); -#ifdef CONFIG_DCB - kfree(adapter->ixgbe_ieee_pfc); - kfree(adapter->ixgbe_ieee_ets); -#endif #ifdef CONFIG_PM retval = pci_save_state(pdev); @@ -7224,6 +7220,11 @@ static void __devexit ixgbe_remove(struct pci_dev *pdev) ixgbe_release_hw_control(adapter); +#ifdef CONFIG_DCB + kfree(adapter->ixgbe_ieee_pfc); + kfree(adapter->ixgbe_ieee_ets); + +#endif iounmap(adapter->hw.hw_addr); pci_release_selected_regions(pdev, pci_select_bars(pdev, IORESOURCE_MEM)); From 441e1719f21356ef84d2debc6ca3e6d07e6c8889 Mon Sep 17 00:00:00 2001 From: Yi Zou Date: Fri, 20 Apr 2012 05:48:08 +0000 Subject: [PATCH 327/365] ixgbe: fix calling skb_put on nonlinear skb assertion bug With the support to bounce buffer added, the skb is coming as nonlinear in the case of non-DDPed data frames for FCoE, which is mostly ok as the FCoE stack would take care of that. However, for target mode, we have to set the FC CRC and FC EOF field to allow the protocol stack to not drop the frame for the last data frame of that sequence. So fix this by linearizing the skb first before doing skb_put(). Signed-off-by: Yi Zou Tested-by: Marcus Dennis Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c index 77ea4b716535..bc07933d67da 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c @@ -437,6 +437,7 @@ int ixgbe_fcoe_ddp(struct ixgbe_adapter *adapter, */ if ((fh->fh_r_ctl == FC_RCTL_DD_SOL_DATA) && (fctl & FC_FC_END_SEQ)) { + skb_linearize(skb); crc = (struct fcoe_crc_eof *)skb_put(skb, sizeof(*crc)); crc->fcoe_eof = FC_EOF_T; } From 60158e64641fd8c780a6d14de2bf42aabc419916 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Mon, 30 Apr 2012 07:15:47 +0000 Subject: [PATCH 328/365] cxgb3: Don't call cxgb_vlan_mode until q locks are initialized The driver calls cxgb_vlan_mode() from init_one(). This calls into synchronize_rx(), which locks all the q locks, but the q locks are not initialized until cxgb_up() -> setup_sge_qsets(). So move the call to cxgb_vlan_mode() into cxgb_up(), after the call to setup_sge_qsets(). We also move the body of these functions up higher to avoid having to a forward declaration. This was found because of the lockdep warning: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. Pid: 323, comm: work_for_cpu Not tainted 3.4.0-rc5 #28 Call Trace: [] register_lock_class+0x108/0x2d0 [] __lock_acquire+0xd3/0xd06 [] lock_acquire+0xbf/0xfe [] _raw_spin_lock_irq+0x36/0x45 [] cxgb_vlan_mode+0x96/0xcb [cxgb3] [] init_one+0x8c4/0x980 [cxgb3] [] local_pci_probe+0x3f/0x70 [] do_work_for_cpu+0x10/0x22 [] kthread+0xa1/0xa9 [] kernel_thread_helper+0x4/0x10 Contrary to what lockdep says, the code is not fine: we are locking an uninitialized spinlock. Signed-off-by: Roland Dreier Signed-off-by: David S. Miller --- .../net/ethernet/chelsio/cxgb3/cxgb3_main.c | 92 +++++++++---------- 1 file changed, 46 insertions(+), 46 deletions(-) diff --git a/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c index 63bfdd10bd6d..abb6ce7c1b7e 100644 --- a/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c +++ b/drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c @@ -1149,6 +1149,48 @@ release_tpsram: return ret; } +/** + * t3_synchronize_rx - wait for current Rx processing on a port to complete + * @adap: the adapter + * @p: the port + * + * Ensures that current Rx processing on any of the queues associated with + * the given port completes before returning. We do this by acquiring and + * releasing the locks of the response queues associated with the port. + */ +static void t3_synchronize_rx(struct adapter *adap, const struct port_info *p) +{ + int i; + + for (i = p->first_qset; i < p->first_qset + p->nqsets; i++) { + struct sge_rspq *q = &adap->sge.qs[i].rspq; + + spin_lock_irq(&q->lock); + spin_unlock_irq(&q->lock); + } +} + +static void cxgb_vlan_mode(struct net_device *dev, netdev_features_t features) +{ + struct port_info *pi = netdev_priv(dev); + struct adapter *adapter = pi->adapter; + + if (adapter->params.rev > 0) { + t3_set_vlan_accel(adapter, 1 << pi->port_id, + features & NETIF_F_HW_VLAN_RX); + } else { + /* single control for all ports */ + unsigned int i, have_vlans = features & NETIF_F_HW_VLAN_RX; + + for_each_port(adapter, i) + have_vlans |= + adapter->port[i]->features & NETIF_F_HW_VLAN_RX; + + t3_set_vlan_accel(adapter, 1, have_vlans); + } + t3_synchronize_rx(adapter, pi); +} + /** * cxgb_up - enable the adapter * @adapter: adapter being enabled @@ -1161,7 +1203,7 @@ release_tpsram: */ static int cxgb_up(struct adapter *adap) { - int err; + int i, err; if (!(adap->flags & FULL_INIT_DONE)) { err = t3_check_fw_version(adap); @@ -1198,6 +1240,9 @@ static int cxgb_up(struct adapter *adap) if (err) goto out; + for_each_port(adap, i) + cxgb_vlan_mode(adap->port[i], adap->port[i]->features); + setup_rss(adap); if (!(adap->flags & NAPI_INIT)) init_napi(adap); @@ -2508,48 +2553,6 @@ static int cxgb_set_mac_addr(struct net_device *dev, void *p) return 0; } -/** - * t3_synchronize_rx - wait for current Rx processing on a port to complete - * @adap: the adapter - * @p: the port - * - * Ensures that current Rx processing on any of the queues associated with - * the given port completes before returning. We do this by acquiring and - * releasing the locks of the response queues associated with the port. - */ -static void t3_synchronize_rx(struct adapter *adap, const struct port_info *p) -{ - int i; - - for (i = p->first_qset; i < p->first_qset + p->nqsets; i++) { - struct sge_rspq *q = &adap->sge.qs[i].rspq; - - spin_lock_irq(&q->lock); - spin_unlock_irq(&q->lock); - } -} - -static void cxgb_vlan_mode(struct net_device *dev, netdev_features_t features) -{ - struct port_info *pi = netdev_priv(dev); - struct adapter *adapter = pi->adapter; - - if (adapter->params.rev > 0) { - t3_set_vlan_accel(adapter, 1 << pi->port_id, - features & NETIF_F_HW_VLAN_RX); - } else { - /* single control for all ports */ - unsigned int i, have_vlans = features & NETIF_F_HW_VLAN_RX; - - for_each_port(adapter, i) - have_vlans |= - adapter->port[i]->features & NETIF_F_HW_VLAN_RX; - - t3_set_vlan_accel(adapter, 1, have_vlans); - } - t3_synchronize_rx(adapter, pi); -} - static netdev_features_t cxgb_fix_features(struct net_device *dev, netdev_features_t features) { @@ -3353,9 +3356,6 @@ static int __devinit init_one(struct pci_dev *pdev, err = sysfs_create_group(&adapter->port[0]->dev.kobj, &cxgb3_attr_group); - for_each_port(adapter, i) - cxgb_vlan_mode(adapter->port[i], adapter->port[i]->features); - print_port_info(adapter, ai); return 0; From 13176a89e1c4a0011bd9f576730b0338ecb619ff Mon Sep 17 00:00:00 2001 From: Russ Dill Date: Sun, 22 Apr 2012 01:48:18 -0700 Subject: [PATCH 329/365] mfd: Fix build breakage in omap-usb-host.c 'ARM: OMAP3: USB: Fix the EHCI ULPI PHY reset issue' removes the include for linux/gpio.h from omap-usb-host.c. This include indirectly includes plat/cpu.h which is required by omap-usb-host.c. Fix the build breakage by including it directly. Acked-by: Keshava Munegowda Acked-by: Kevin Hilman Tested-by: Arend van Spriel Signed-off-by: Russ Dill Signed-off-by: Samuel Ortiz --- drivers/mfd/omap-usb-host.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c index c8aae6640e64..7e96bb229724 100644 --- a/drivers/mfd/omap-usb-host.c +++ b/drivers/mfd/omap-usb-host.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include From 5158ba3ea7fc8c3deafec769a32bc6eb869c3608 Mon Sep 17 00:00:00 2001 From: Russ Dill Date: Mon, 23 Apr 2012 19:43:00 -0700 Subject: [PATCH 330/365] ktest.pl: Fix combined usage of BISECT_REVERSE and BISECT_SKIP When BISECT_REVERSE and BISECT_SKIP are used together with boot or test testing, build failures are treated as boot or test failures and 'git bisect bad' is executed instead of 'git bisect skip'. This is because the $ret value of -1 is treated as a build failure, but the $reverse_bisect logic does not properly handle this. Simple fix, only invert it if it is positive. Link: http://lkml.kernel.org/r/1335235380-8509-1-git-send-email-Russ.Dill@ti.com Signed-off-by: Russ Dill Signed-off-by: Steven Rostedt --- tools/testing/ktest/ktest.pl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index 95d6a6f7c33a..d2ede59b9a3c 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -2192,7 +2192,7 @@ sub run_bisect { } # Are we looking for where it worked, not failed? - if ($reverse_bisect) { + if ($reverse_bisect && $ret >= 0) { $ret = !$ret; } From 759a3cc625e77161ae457459489178dd0921524e Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Tue, 1 May 2012 08:20:12 -0400 Subject: [PATCH 331/365] ktest: Fix reboot on success stopping all reboots The change to let individual tests decide to reboot the machine on success of the entire test also prevented errors from rebooting when an error was detected. The "no_reboot" variable was only cleared if the test had reboot_on_success set. But the no_reboot variable also prevents the test rebooting when an error was detected even when REBOOT_ON_ERROR was set. Add a new "reboot_success" variable that is used to determine if the test should reboot on success and not touch the no_reboot variable. Signed-off-by: Steven Rostedt --- tools/testing/ktest/ktest.pl | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/tools/testing/ktest/ktest.pl b/tools/testing/ktest/ktest.pl index d2ede59b9a3c..4915408f6a98 100755 --- a/tools/testing/ktest/ktest.pl +++ b/tools/testing/ktest/ktest.pl @@ -183,6 +183,9 @@ my %force_config; # do not force reboots on config problems my $no_reboot = 1; +# reboot on success +my $reboot_success = 0; + my %option_map = ( "MACHINE" => \$machine, "SSH_USER" => \$ssh_user, @@ -3469,6 +3472,7 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { # Do not reboot on failing test options $no_reboot = 1; + $reboot_success = 0; $iteration = $i; @@ -3554,9 +3558,11 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { die "failed to checkout $checkout"; } + $no_reboot = 0; + # A test may opt to not reboot the box if ($reboot_on_success) { - $no_reboot = 0; + $reboot_success = 1; } if ($test_type eq "bisect") { @@ -3600,7 +3606,7 @@ for (my $i = 1; $i <= $opt{"NUM_TESTS"}; $i++) { if ($opt{"POWEROFF_ON_SUCCESS"}) { halt; -} elsif ($opt{"REBOOT_ON_SUCCESS"} && !do_not_reboot) { +} elsif ($opt{"REBOOT_ON_SUCCESS"} && !do_not_reboot && $reboot_success) { reboot_to_good; } elsif (defined($switch_to_good)) { # still need to get to the good kernel From d961949660fa1c1b7eb0c3a3c157989c90f14e8e Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 30 Apr 2012 21:29:16 +0000 Subject: [PATCH 332/365] net: fix two typos in skbuff.h fix kernel doc typos in function names Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/linux/skbuff.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 775292a66fa4..111f26b6e28b 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -1020,7 +1020,7 @@ static inline void skb_queue_splice(const struct sk_buff_head *list, } /** - * skb_queue_splice - join two skb lists and reinitialise the emptied list + * skb_queue_splice_init - join two skb lists and reinitialise the emptied list * @list: the new list to add * @head: the place to add it in the first list * @@ -1051,7 +1051,7 @@ static inline void skb_queue_splice_tail(const struct sk_buff_head *list, } /** - * skb_queue_splice_tail - join two skb lists and reinitialise the emptied list + * skb_queue_splice_tail_init - join two skb lists and reinitialise the emptied list * @list: the new list to add * @head: the place to add it in the first list * From b704871124b477807966f06789c2b32f2de58bf7 Mon Sep 17 00:00:00 2001 From: "Kirill A. Shutemov" Date: Mon, 30 Apr 2012 09:18:01 -0400 Subject: [PATCH 333/365] hwmon: (coretemp) fix oops on cpu unplug coretemp tries to access core_data array beyond bounds on cpu unplug if core id of the cpu if more than NUM_REAL_CORES-1. BUG: unable to handle kernel NULL pointer dereference at 000000000000013c IP: [] coretemp_cpu_callback+0x93/0x1ba [coretemp] PGD 673e5a067 PUD 66e9b3067 PMD 0 Oops: 0000 [#1] SMP CPU 79 Modules linked in: sunrpc cpufreq_ondemand acpi_cpufreq freq_table mperf bnep bluetooth rfkill ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_filter nf_conntrack_ipv4 nf_defrag_ipv4 ip6_tables xt_state nf_conntrack coretemp crc32c_intel asix tpm_tis pcspkr usbnet iTCO_wdt i2c_i801 microcode mii joydev tpm i2c_core iTCO_vendor_support tpm_bios i7core_edac igb ioatdma edac_core dca megaraid_sas [last unloaded: oprofile] Pid: 3315, comm: set-cpus Tainted: G W 3.4.0-rc5+ #2 QCI QSSC-S4R/QSSC-S4R RIP: 0010:[] [] coretemp_cpu_callback+0x93/0x1ba [coretemp] RSP: 0018:ffff880472fb3d48 EFLAGS: 00010246 RAX: 0000000000000124 RBX: 0000000000000034 RCX: 00000000ffffffff RDX: 0000000000000000 RSI: 0000000000000046 RDI: 0000000000000246 RBP: ffff880472fb3d88 R08: ffff88077fcd36c0 R09: 0000000000000001 R10: ffffffff8184bc48 R11: 0000000000000000 R12: ffff880273095800 R13: 0000000000000013 R14: ffff8802730a1810 R15: 0000000000000000 FS: 00007f694a20f720(0000) GS:ffff88077fcc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 000000000000013c CR3: 000000067209b000 CR4: 00000000000007e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process set-cpus (pid: 3315, threadinfo ffff880472fb2000, task ffff880471fa0000) Stack: ffff880277b4c308 0000000000000003 ffff880472fb3d88 0000000000000005 0000000000000034 00000000ffffffd1 ffffffff81cadc70 ffff880472fb3e14 ffff880472fb3dc8 ffffffff8161f48d ffff880471fa0000 0000000000000034 Call Trace: [] notifier_call_chain+0x4d/0x70 [] __raw_notifier_call_chain+0xe/0x10 [] __cpu_notify+0x20/0x40 [] _cpu_down+0x81/0x270 [] cpu_down+0x37/0x50 [] store_online+0x63/0xc0 [] dev_attr_store+0x18/0x30 [] sysfs_write_file+0xef/0x170 [] vfs_write+0xb3/0x180 [] sys_write+0x4a/0x90 [] system_call_fastpath+0x16/0x1b Code: 48 c7 c7 94 60 01 a0 44 0f b7 ac 10 ac 00 00 00 31 c0 e8 41 b7 5f e1 41 83 c5 02 49 63 c5 49 8b 44 c4 10 48 85 c0 74 56 45 31 ff <39> 58 18 75 4e eb 1f 49 63 d7 4c 89 f7 48 89 45 c8 48 6b d2 28 RIP [] coretemp_cpu_callback+0x93/0x1ba [coretemp] RSP CR2: 000000000000013c Signed-off-by: Kirill A. Shutemov Cc: stable@vger.kernel.org # 3.0+ Signed-off-by: Guenter Roeck --- drivers/hwmon/coretemp.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c index 0d3141fbbc20..54a70fe12441 100644 --- a/drivers/hwmon/coretemp.c +++ b/drivers/hwmon/coretemp.c @@ -709,6 +709,10 @@ static void __cpuinit put_core_offline(unsigned int cpu) indx = TO_ATTR_NO(cpu); + /* The core id is too big, just return */ + if (indx > MAX_CORE_DATA - 1) + return; + if (pdata->core_data[indx] && pdata->core_data[indx]->cpu == cpu) coretemp_remove_core(pdata, &pdev->dev, indx); From bdc71c9a87b898e4c380c23b2e3e18071312ecde Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Tue, 1 May 2012 08:15:42 -0700 Subject: [PATCH 334/365] hwmon: (coretemp) Increase CPU core limit CPU core ID is used to index the core_data[] array. The core ID is, however, not sequential; 10-core CPUS can have a core ID as high as 25. Increase the limit to 32 to be able to deal with current CPUs. Signed-off-by: Guenter Roeck Cc: stable@vger.kernel.org # 3.0+ Acked-by: Jean Delvare Acked-by: Durgadoss R --- drivers/hwmon/coretemp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c index 54a70fe12441..b9d512331ed4 100644 --- a/drivers/hwmon/coretemp.c +++ b/drivers/hwmon/coretemp.c @@ -52,7 +52,7 @@ module_param_named(tjmax, force_tjmax, int, 0444); MODULE_PARM_DESC(tjmax, "TjMax value in degrees Celsius"); #define BASE_SYSFS_ATTR_NO 2 /* Sysfs Base attr no for coretemp */ -#define NUM_REAL_CORES 16 /* Number of Real cores per cpu */ +#define NUM_REAL_CORES 32 /* Number of Real cores per cpu */ #define CORETEMP_NAME_LENGTH 17 /* String Length of attrs */ #define MAX_CORE_ATTRS 4 /* Maximum no of basic attrs */ #define TOTAL_ATTRS (MAX_CORE_ATTRS + 1) From 3f42941b5d1d13542b1a755a9e4f633aa72e4d3e Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Mon, 30 Apr 2012 05:49:45 +0000 Subject: [PATCH 335/365] sky2: propogate rx hash when packet is copied When a small packet is received, the driver copies it to a new skb to allow reusing the full size Rx buffer. The copy was propogating the checksum offload but not the receive hash information. The bug is impact was mostly harmless and therefore not observed until reviewing this area of code. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/sky2.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/ethernet/marvell/sky2.c b/drivers/net/ethernet/marvell/sky2.c index c9b504e2dfc3..0ced3117abc6 100644 --- a/drivers/net/ethernet/marvell/sky2.c +++ b/drivers/net/ethernet/marvell/sky2.c @@ -2494,8 +2494,11 @@ static struct sk_buff *receive_copy(struct sky2_port *sky2, skb_copy_from_linear_data(re->skb, skb->data, length); skb->ip_summed = re->skb->ip_summed; skb->csum = re->skb->csum; + skb->rxhash = re->skb->rxhash; + pci_dma_sync_single_for_device(sky2->hw->pdev, re->data_addr, length, PCI_DMA_FROMDEVICE); + re->skb->rxhash = 0; re->skb->ip_summed = CHECKSUM_NONE; skb_put(skb, length); } From e072b3fad5f3915102c94628b4971f52ff99dd05 Mon Sep 17 00:00:00 2001 From: stephen hemminger Date: Mon, 30 Apr 2012 06:47:37 +0000 Subject: [PATCH 336/365] sky2: fix receive length error in mixed non-VLAN/VLAN traffic Bug: The VLAN bit of the MAC RX Status Word is unreliable in several older supported chips. Sometimes the VLAN bit is not set for valid VLAN packets and also sometimes the VLAN bit is set for non-VLAN packets that came after a VLAN packet. This results in a receive length error when VLAN hardware tagging is enabled. Fix: Variation on original fix proposed by Mirko. The VLAN information is decoded in the status loop, and can be applied to the received SKB there. This eliminates the need for the separate tag field in the interface data structure. The tag has to be copied and cleared if packet is copied. This version checked out with vlan and normal traffic. Note: vlan_tx_tag_present should be renamed vlan_tag_present, but that is outside scope of this. Reported-by: Mirko Lindner Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- drivers/net/ethernet/marvell/sky2.c | 28 +++++++++++++++++----------- drivers/net/ethernet/marvell/sky2.h | 1 - 2 files changed, 17 insertions(+), 12 deletions(-) diff --git a/drivers/net/ethernet/marvell/sky2.c b/drivers/net/ethernet/marvell/sky2.c index 0ced3117abc6..487a6c8bd4ec 100644 --- a/drivers/net/ethernet/marvell/sky2.c +++ b/drivers/net/ethernet/marvell/sky2.c @@ -2495,9 +2495,11 @@ static struct sk_buff *receive_copy(struct sky2_port *sky2, skb->ip_summed = re->skb->ip_summed; skb->csum = re->skb->csum; skb->rxhash = re->skb->rxhash; + skb->vlan_tci = re->skb->vlan_tci; pci_dma_sync_single_for_device(sky2->hw->pdev, re->data_addr, length, PCI_DMA_FROMDEVICE); + re->skb->vlan_tci = 0; re->skb->rxhash = 0; re->skb->ip_summed = CHECKSUM_NONE; skb_put(skb, length); @@ -2583,9 +2585,6 @@ static struct sk_buff *sky2_receive(struct net_device *dev, struct sk_buff *skb = NULL; u16 count = (status & GMR_FS_LEN) >> 16; - if (status & GMR_FS_VLAN) - count -= VLAN_HLEN; /* Account for vlan tag */ - netif_printk(sky2, rx_status, KERN_DEBUG, dev, "rx slot %u status 0x%x len %d\n", sky2->rx_next, status, length); @@ -2593,6 +2592,9 @@ static struct sk_buff *sky2_receive(struct net_device *dev, sky2->rx_next = (sky2->rx_next + 1) % sky2->rx_pending; prefetch(sky2->rx_ring + sky2->rx_next); + if (vlan_tx_tag_present(re->skb)) + count -= VLAN_HLEN; /* Account for vlan tag */ + /* This chip has hardware problems that generates bogus status. * So do only marginal checking and expect higher level protocols * to handle crap frames. @@ -2650,11 +2652,8 @@ static inline void sky2_tx_done(struct net_device *dev, u16 last) } static inline void sky2_skb_rx(const struct sky2_port *sky2, - u32 status, struct sk_buff *skb) + struct sk_buff *skb) { - if (status & GMR_FS_VLAN) - __vlan_hwaccel_put_tag(skb, be16_to_cpu(sky2->rx_tag)); - if (skb->ip_summed == CHECKSUM_NONE) netif_receive_skb(skb); else @@ -2708,6 +2707,14 @@ static void sky2_rx_checksum(struct sky2_port *sky2, u32 status) } } +static void sky2_rx_tag(struct sky2_port *sky2, u16 length) +{ + struct sk_buff *skb; + + skb = sky2->rx_ring[sky2->rx_next].skb; + __vlan_hwaccel_put_tag(skb, be16_to_cpu(length)); +} + static void sky2_rx_hash(struct sky2_port *sky2, u32 status) { struct sk_buff *skb; @@ -2766,8 +2773,7 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do, u16 idx) } skb->protocol = eth_type_trans(skb, dev); - - sky2_skb_rx(sky2, status, skb); + sky2_skb_rx(sky2, skb); /* Stop after net poll weight */ if (++work_done >= to_do) @@ -2775,11 +2781,11 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do, u16 idx) break; case OP_RXVLAN: - sky2->rx_tag = length; + sky2_rx_tag(sky2, length); break; case OP_RXCHKSVLAN: - sky2->rx_tag = length; + sky2_rx_tag(sky2, length); /* fall through */ case OP_RXCHKS: if (likely(dev->features & NETIF_F_RXCSUM)) diff --git a/drivers/net/ethernet/marvell/sky2.h b/drivers/net/ethernet/marvell/sky2.h index ff6f58bf822a..3c896ce80b71 100644 --- a/drivers/net/ethernet/marvell/sky2.h +++ b/drivers/net/ethernet/marvell/sky2.h @@ -2241,7 +2241,6 @@ struct sky2_port { u16 rx_pending; u16 rx_data_size; u16 rx_nfrags; - u16 rx_tag; struct { unsigned long last; From 116a0fc31c6c9b8fc821be5a96e5bf0b43260131 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sun, 29 Apr 2012 09:08:22 +0000 Subject: [PATCH 337/365] netem: fix possible skb leak skb_checksum_help(skb) can return an error, we must free skb in this case. qdisc_drop(skb, sch) can also be feeded with a NULL skb (if skb_unshare() failed), so lets use this generic helper. Signed-off-by: Eric Dumazet Cc: Stephen Hemminger Signed-off-by: David S. Miller --- net/sched/sch_netem.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/net/sched/sch_netem.c b/net/sched/sch_netem.c index 5da548fa7ae9..ebd22966f748 100644 --- a/net/sched/sch_netem.c +++ b/net/sched/sch_netem.c @@ -408,10 +408,8 @@ static int netem_enqueue(struct sk_buff *skb, struct Qdisc *sch) if (q->corrupt && q->corrupt >= get_crandom(&q->corrupt_cor)) { if (!(skb = skb_unshare(skb, GFP_ATOMIC)) || (skb->ip_summed == CHECKSUM_PARTIAL && - skb_checksum_help(skb))) { - sch->qstats.drops++; - return NET_XMIT_DROP; - } + skb_checksum_help(skb))) + return qdisc_drop(skb, sch); skb->data[net_random() % skb_headlen(skb)] ^= 1<<(net_random() % 8); } From 84f904ecd3aa2ccb5779b815b69c1cb592f07bb5 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 1 May 2012 16:12:19 +0100 Subject: [PATCH 338/365] vt: Fix deadlock on scroll-lock Fixing the locking accidentally replaced a race in the scroll lock handling with a deadlock. Turn it back into a race for now. The basic problem is that there are two paths into the tty stop/start helpers. One via the tty layer ^S/^Q handling where we need to take the kbd_event_lock and one via the special keyboard handler for fn_hold where we already hold it. Probably we need to split out into a separate LED lock but for now just go back to the race as it's a bit close to release. Reported-by: Clemens Ladisch Cc: Jiri Kosina Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/tty/vt/keyboard.c | 26 +++++++++++++++++++------- 1 file changed, 19 insertions(+), 7 deletions(-) diff --git a/drivers/tty/vt/keyboard.c b/drivers/tty/vt/keyboard.c index 86dd1e302bb3..29ca20dbd335 100644 --- a/drivers/tty/vt/keyboard.c +++ b/drivers/tty/vt/keyboard.c @@ -1085,15 +1085,21 @@ void vt_set_led_state(int console, int leds) * * Handle console start. This is a wrapper for the VT layer * so that we can keep kbd knowledge internal + * + * FIXME: We eventually need to hold the kbd lock here to protect + * the LED updating. We can't do it yet because fn_hold calls stop_tty + * and start_tty under the kbd_event_lock, while normal tty paths + * don't hold the lock. We probably need to split out an LED lock + * but not during an -rc release! */ void vt_kbd_con_start(int console) { struct kbd_struct * kbd = kbd_table + console; - unsigned long flags; - spin_lock_irqsave(&kbd_event_lock, flags); +/* unsigned long flags; */ +/* spin_lock_irqsave(&kbd_event_lock, flags); */ clr_vc_kbd_led(kbd, VC_SCROLLOCK); set_leds(); - spin_unlock_irqrestore(&kbd_event_lock, flags); +/* spin_unlock_irqrestore(&kbd_event_lock, flags); */ } /** @@ -1102,22 +1108,28 @@ void vt_kbd_con_start(int console) * * Handle console stop. This is a wrapper for the VT layer * so that we can keep kbd knowledge internal + * + * FIXME: We eventually need to hold the kbd lock here to protect + * the LED updating. We can't do it yet because fn_hold calls stop_tty + * and start_tty under the kbd_event_lock, while normal tty paths + * don't hold the lock. We probably need to split out an LED lock + * but not during an -rc release! */ void vt_kbd_con_stop(int console) { struct kbd_struct * kbd = kbd_table + console; - unsigned long flags; - spin_lock_irqsave(&kbd_event_lock, flags); +/* unsigned long flags; */ +/* spin_lock_irqsave(&kbd_event_lock, flags); */ set_vc_kbd_led(kbd, VC_SCROLLOCK); set_leds(); - spin_unlock_irqrestore(&kbd_event_lock, flags); +/* spin_unlock_irqrestore(&kbd_event_lock, flags); */ } /* * This is the tasklet that updates LED state on all keyboards * attached to the box. The reason we use tasklet is that we * need to handle the scenario when keyboard handler is not - * registered yet but we already getting updates form VT to + * registered yet but we already getting updates from the VT to * update led state. */ static void kbd_bh(unsigned long dummy) From ebf20de453042c066a289b90dd14d59de03dba2f Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 1 May 2012 11:28:49 -0400 Subject: [PATCH 339/365] EHCI: update PM methods in ehci-tegra.c This patch (as1547) rearranges the Power Management parts of the ehci-tegra driver to match the conventions used in other EHCI platform drivers. In particular, the controller should not be powered down by the root hub's suspend routine; the controller's power level should be managed by the controller's own PM methods. The end result of the patch is that the standard ehci_bus_suspend() and ehci_bus_resume() methods can be used instead of special-purpose routines. The driver now uses the standard dev_pm_ops methods instead of legacy power management. Since there is no supported wakeup mechanism for the controller, runtime suspend is forbidden by default (this can be overridden via sysfs, if desired). These adjustments are needed in order to make ehci-tegra compatible with recent changes to the USB core. The core now checks the root hub's status following bus suspend; if the controller is automatically powered down during bus suspend then the check will fail and the root hub will be resumed immediately. Doing the controller power-down in a separate method avoids this problem. Signed-off-by: Alan Stern Acked-by: Stephen Warren Tested-by: Stephen Warren Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-tegra.c | 375 ++++++++++++++++++---------------- 1 file changed, 195 insertions(+), 180 deletions(-) diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index 86183366647f..73f3525e6921 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include @@ -37,9 +38,7 @@ struct tegra_ehci_hcd { struct clk *emc_clk; struct usb_phy *transceiver; int host_resumed; - int bus_suspended; int port_resuming; - int power_down_on_bus_suspend; enum tegra_usb_phy_port_speed port_speed; }; @@ -273,120 +272,6 @@ static void tegra_ehci_restart(struct usb_hcd *hcd) up_write(&ehci_cf_port_reset_rwsem); } -static int tegra_usb_suspend(struct usb_hcd *hcd) -{ - struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller); - struct ehci_regs __iomem *hw = tegra->ehci->regs; - unsigned long flags; - - spin_lock_irqsave(&tegra->ehci->lock, flags); - - tegra->port_speed = (readl(&hw->port_status[0]) >> 26) & 0x3; - ehci_halt(tegra->ehci); - clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); - - spin_unlock_irqrestore(&tegra->ehci->lock, flags); - - tegra_ehci_power_down(hcd); - return 0; -} - -static int tegra_usb_resume(struct usb_hcd *hcd) -{ - struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller); - struct ehci_hcd *ehci = hcd_to_ehci(hcd); - struct ehci_regs __iomem *hw = ehci->regs; - unsigned long val; - - set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); - tegra_ehci_power_up(hcd); - - if (tegra->port_speed > TEGRA_USB_PHY_PORT_SPEED_HIGH) { - /* Wait for the phy to detect new devices - * before we restart the controller */ - msleep(10); - goto restart; - } - - /* Force the phy to keep data lines in suspend state */ - tegra_ehci_phy_restore_start(tegra->phy, tegra->port_speed); - - /* Enable host mode */ - tdi_reset(ehci); - - /* Enable Port Power */ - val = readl(&hw->port_status[0]); - val |= PORT_POWER; - writel(val, &hw->port_status[0]); - udelay(10); - - /* Check if the phy resume from LP0. When the phy resume from LP0 - * USB register will be reset. */ - if (!readl(&hw->async_next)) { - /* Program the field PTC based on the saved speed mode */ - val = readl(&hw->port_status[0]); - val &= ~PORT_TEST(~0); - if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_HIGH) - val |= PORT_TEST_FORCE; - else if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_FULL) - val |= PORT_TEST(6); - else if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_LOW) - val |= PORT_TEST(7); - writel(val, &hw->port_status[0]); - udelay(10); - - /* Disable test mode by setting PTC field to NORMAL_OP */ - val = readl(&hw->port_status[0]); - val &= ~PORT_TEST(~0); - writel(val, &hw->port_status[0]); - udelay(10); - } - - /* Poll until CCS is enabled */ - if (handshake(ehci, &hw->port_status[0], PORT_CONNECT, - PORT_CONNECT, 2000)) { - pr_err("%s: timeout waiting for PORT_CONNECT\n", __func__); - goto restart; - } - - /* Poll until PE is enabled */ - if (handshake(ehci, &hw->port_status[0], PORT_PE, - PORT_PE, 2000)) { - pr_err("%s: timeout waiting for USB_PORTSC1_PE\n", __func__); - goto restart; - } - - /* Clear the PCI status, to avoid an interrupt taken upon resume */ - val = readl(&hw->status); - val |= STS_PCD; - writel(val, &hw->status); - - /* Put controller in suspend mode by writing 1 to SUSP bit of PORTSC */ - val = readl(&hw->port_status[0]); - if ((val & PORT_POWER) && (val & PORT_PE)) { - val |= PORT_SUSPEND; - writel(val, &hw->port_status[0]); - - /* Wait until port suspend completes */ - if (handshake(ehci, &hw->port_status[0], PORT_SUSPEND, - PORT_SUSPEND, 1000)) { - pr_err("%s: timeout waiting for PORT_SUSPEND\n", - __func__); - goto restart; - } - } - - tegra_ehci_phy_restore_end(tegra->phy); - return 0; - -restart: - if (tegra->port_speed <= TEGRA_USB_PHY_PORT_SPEED_HIGH) - tegra_ehci_phy_restore_end(tegra->phy); - - tegra_ehci_restart(hcd); - return 0; -} - static void tegra_ehci_shutdown(struct usb_hcd *hcd) { struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller); @@ -434,36 +319,6 @@ static int tegra_ehci_setup(struct usb_hcd *hcd) return retval; } -#ifdef CONFIG_PM -static int tegra_ehci_bus_suspend(struct usb_hcd *hcd) -{ - struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller); - int error_status = 0; - - error_status = ehci_bus_suspend(hcd); - if (!error_status && tegra->power_down_on_bus_suspend) { - tegra_usb_suspend(hcd); - tegra->bus_suspended = 1; - } - - return error_status; -} - -static int tegra_ehci_bus_resume(struct usb_hcd *hcd) -{ - struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller); - - if (tegra->bus_suspended && tegra->power_down_on_bus_suspend) { - tegra_usb_resume(hcd); - tegra->bus_suspended = 0; - } - - tegra_usb_phy_preresume(tegra->phy); - tegra->port_resuming = 1; - return ehci_bus_resume(hcd); -} -#endif - struct temp_buffer { void *kmalloc_ptr; void *old_xfer_buffer; @@ -574,8 +429,8 @@ static const struct hc_driver tegra_ehci_hc_driver = { .hub_control = tegra_ehci_hub_control, .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, #ifdef CONFIG_PM - .bus_suspend = tegra_ehci_bus_suspend, - .bus_resume = tegra_ehci_bus_resume, + .bus_suspend = ehci_bus_suspend, + .bus_resume = ehci_bus_resume, #endif .relinquish_port = ehci_relinquish_port, .port_handed_over = ehci_port_handed_over, @@ -608,6 +463,183 @@ static int setup_vbus_gpio(struct platform_device *pdev) return err; } +#ifdef CONFIG_PM + +static int controller_suspend(struct device *dev) +{ + struct tegra_ehci_hcd *tegra = + platform_get_drvdata(to_platform_device(dev)); + struct ehci_hcd *ehci = tegra->ehci; + struct usb_hcd *hcd = ehci_to_hcd(ehci); + struct ehci_regs __iomem *hw = ehci->regs; + unsigned long flags; + + if (time_before(jiffies, ehci->next_statechange)) + msleep(10); + + spin_lock_irqsave(&ehci->lock, flags); + + tegra->port_speed = (readl(&hw->port_status[0]) >> 26) & 0x3; + ehci_halt(ehci); + clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); + + spin_unlock_irqrestore(&ehci->lock, flags); + + tegra_ehci_power_down(hcd); + return 0; +} + +static int controller_resume(struct device *dev) +{ + struct tegra_ehci_hcd *tegra = + platform_get_drvdata(to_platform_device(dev)); + struct ehci_hcd *ehci = tegra->ehci; + struct usb_hcd *hcd = ehci_to_hcd(ehci); + struct ehci_regs __iomem *hw = ehci->regs; + unsigned long val; + + set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); + tegra_ehci_power_up(hcd); + + if (tegra->port_speed > TEGRA_USB_PHY_PORT_SPEED_HIGH) { + /* Wait for the phy to detect new devices + * before we restart the controller */ + msleep(10); + goto restart; + } + + /* Force the phy to keep data lines in suspend state */ + tegra_ehci_phy_restore_start(tegra->phy, tegra->port_speed); + + /* Enable host mode */ + tdi_reset(ehci); + + /* Enable Port Power */ + val = readl(&hw->port_status[0]); + val |= PORT_POWER; + writel(val, &hw->port_status[0]); + udelay(10); + + /* Check if the phy resume from LP0. When the phy resume from LP0 + * USB register will be reset. */ + if (!readl(&hw->async_next)) { + /* Program the field PTC based on the saved speed mode */ + val = readl(&hw->port_status[0]); + val &= ~PORT_TEST(~0); + if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_HIGH) + val |= PORT_TEST_FORCE; + else if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_FULL) + val |= PORT_TEST(6); + else if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_LOW) + val |= PORT_TEST(7); + writel(val, &hw->port_status[0]); + udelay(10); + + /* Disable test mode by setting PTC field to NORMAL_OP */ + val = readl(&hw->port_status[0]); + val &= ~PORT_TEST(~0); + writel(val, &hw->port_status[0]); + udelay(10); + } + + /* Poll until CCS is enabled */ + if (handshake(ehci, &hw->port_status[0], PORT_CONNECT, + PORT_CONNECT, 2000)) { + pr_err("%s: timeout waiting for PORT_CONNECT\n", __func__); + goto restart; + } + + /* Poll until PE is enabled */ + if (handshake(ehci, &hw->port_status[0], PORT_PE, + PORT_PE, 2000)) { + pr_err("%s: timeout waiting for USB_PORTSC1_PE\n", __func__); + goto restart; + } + + /* Clear the PCI status, to avoid an interrupt taken upon resume */ + val = readl(&hw->status); + val |= STS_PCD; + writel(val, &hw->status); + + /* Put controller in suspend mode by writing 1 to SUSP bit of PORTSC */ + val = readl(&hw->port_status[0]); + if ((val & PORT_POWER) && (val & PORT_PE)) { + val |= PORT_SUSPEND; + writel(val, &hw->port_status[0]); + + /* Wait until port suspend completes */ + if (handshake(ehci, &hw->port_status[0], PORT_SUSPEND, + PORT_SUSPEND, 1000)) { + pr_err("%s: timeout waiting for PORT_SUSPEND\n", + __func__); + goto restart; + } + } + + tegra_ehci_phy_restore_end(tegra->phy); + goto done; + + restart: + if (tegra->port_speed <= TEGRA_USB_PHY_PORT_SPEED_HIGH) + tegra_ehci_phy_restore_end(tegra->phy); + + tegra_ehci_restart(hcd); + + done: + tegra_usb_phy_preresume(tegra->phy); + tegra->port_resuming = 1; + return 0; +} + +static int tegra_ehci_suspend(struct device *dev) +{ + struct tegra_ehci_hcd *tegra = + platform_get_drvdata(to_platform_device(dev)); + struct usb_hcd *hcd = ehci_to_hcd(tegra->ehci); + int rc = 0; + + /* + * When system sleep is supported and USB controller wakeup is + * implemented: If the controller is runtime-suspended and the + * wakeup setting needs to be changed, call pm_runtime_resume(). + */ + if (HCD_HW_ACCESSIBLE(hcd)) + rc = controller_suspend(dev); + return rc; +} + +static int tegra_ehci_resume(struct device *dev) +{ + int rc; + + rc = controller_resume(dev); + if (rc == 0) { + pm_runtime_disable(dev); + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + } + return rc; +} + +static int tegra_ehci_runtime_suspend(struct device *dev) +{ + return controller_suspend(dev); +} + +static int tegra_ehci_runtime_resume(struct device *dev) +{ + return controller_resume(dev); +} + +static const struct dev_pm_ops tegra_ehci_pm_ops = { + .suspend = tegra_ehci_suspend, + .resume = tegra_ehci_resume, + .runtime_suspend = tegra_ehci_runtime_suspend, + .runtime_resume = tegra_ehci_runtime_resume, +}; + +#endif + static u64 tegra_ehci_dma_mask = DMA_BIT_MASK(32); static int tegra_ehci_probe(struct platform_device *pdev) @@ -722,7 +754,6 @@ static int tegra_ehci_probe(struct platform_device *pdev) } tegra->host_resumed = 1; - tegra->power_down_on_bus_suspend = pdata->power_down_on_bus_suspend; tegra->ehci = hcd_to_ehci(hcd); irq = platform_get_irq(pdev, 0); @@ -746,6 +777,14 @@ static int tegra_ehci_probe(struct platform_device *pdev) goto fail; } + pm_runtime_set_active(&pdev->dev); + pm_runtime_get_noresume(&pdev->dev); + + /* Don't skip the pm_runtime_forbid call if wakeup isn't working */ + /* if (!pdata->power_down_on_bus_suspend) */ + pm_runtime_forbid(&pdev->dev); + pm_runtime_enable(&pdev->dev); + pm_runtime_put_sync(&pdev->dev); return err; fail: @@ -772,33 +811,6 @@ fail_hcd: return err; } -#ifdef CONFIG_PM -static int tegra_ehci_resume(struct platform_device *pdev) -{ - struct tegra_ehci_hcd *tegra = platform_get_drvdata(pdev); - struct usb_hcd *hcd = ehci_to_hcd(tegra->ehci); - - if (tegra->bus_suspended) - return 0; - - return tegra_usb_resume(hcd); -} - -static int tegra_ehci_suspend(struct platform_device *pdev, pm_message_t state) -{ - struct tegra_ehci_hcd *tegra = platform_get_drvdata(pdev); - struct usb_hcd *hcd = ehci_to_hcd(tegra->ehci); - - if (tegra->bus_suspended) - return 0; - - if (time_before(jiffies, tegra->ehci->next_statechange)) - msleep(10); - - return tegra_usb_suspend(hcd); -} -#endif - static int tegra_ehci_remove(struct platform_device *pdev) { struct tegra_ehci_hcd *tegra = platform_get_drvdata(pdev); @@ -807,6 +819,10 @@ static int tegra_ehci_remove(struct platform_device *pdev) if (tegra == NULL || hcd == NULL) return -EINVAL; + pm_runtime_get_sync(&pdev->dev); + pm_runtime_disable(&pdev->dev); + pm_runtime_put_noidle(&pdev->dev); + #ifdef CONFIG_USB_OTG_UTILS if (tegra->transceiver) { otg_set_host(tegra->transceiver->otg, NULL); @@ -847,13 +863,12 @@ static struct of_device_id tegra_ehci_of_match[] __devinitdata = { static struct platform_driver tegra_ehci_driver = { .probe = tegra_ehci_probe, .remove = tegra_ehci_remove, -#ifdef CONFIG_PM - .suspend = tegra_ehci_suspend, - .resume = tegra_ehci_resume, -#endif .shutdown = tegra_ehci_hcd_shutdown, .driver = { .name = "tegra-ehci", .of_match_table = tegra_ehci_of_match, +#ifdef CONFIG_PM + .pm = &tegra_ehci_pm_ops, +#endif } }; From 04c235c92ce8474e9f2b358bd97f013a500385f2 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Mon, 30 Apr 2012 17:24:10 -0600 Subject: [PATCH 340/365] USB: ehci-tegra: remove redundant gpio_set_value The immediately preceding gpio_direction_output() already set the value, so there's no need to repeat it. This also prevents gpio_set_value() from WARNing when the GPIO is sleepable (e.g. is on an I2C expander); the set direction API is always sleepable, but plain set_value isn't. Cc: # v3.3 Signed-off-by: Stephen Warren Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-tegra.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index 73f3525e6921..f214a80cdee2 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -458,7 +458,6 @@ static int setup_vbus_gpio(struct platform_device *pdev) dev_err(&pdev->dev, "can't enable vbus\n"); return err; } - gpio_set_value(gpio, 1); return err; } From cf04317227d0c53d931a0b963e7ac6f7f0125e8a Mon Sep 17 00:00:00 2001 From: Franky Lin Date: Mon, 30 Apr 2012 11:43:07 -0700 Subject: [PATCH 341/365] brcmfmac: fix a double spin_unlock_irqrestore issue in dpc dpc_tl_lock is not acquired in the error handle code for bus down. But it's unlocked using spin_unlock_irqrestore after finishing task list walk down. Grab the lock before breaking the loop to avoid a double unlock. Reported-by: Dan Carpenter Signed-off-by: Franky Lin Signed-off-by: John W. Linville --- drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c index eb3829b03cd3..e2b34e1563f4 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c @@ -2637,6 +2637,7 @@ static int brcmf_sdbrcm_dpc_thread(void *data) /* after stopping the bus, exit thread */ brcmf_sdbrcm_bus_stop(bus->sdiodev->dev); bus->dpc_tsk = NULL; + spin_lock_irqsave(&bus->dpc_tl_lock, flags); break; } From 9d1ceac5c6f7e77ea914de376ec17ced3eb22e5f Mon Sep 17 00:00:00 2001 From: Rajkumar Manoharan Date: Tue, 1 May 2012 09:12:24 +0530 Subject: [PATCH 342/365] Revert "ath9k_hw: Fix incorrect spur_freq_sd for AR9003" This reverts commit a844adfd7bee4edc66d337de6c33b348e83552a8. The commit a844adfd is degrading rx sensitivity of lower rate in HT40 mode and it is confirmed that reverting the change is improving rx sensitivity. spur_freq_sd (for self-corr in AGC) is defined with respect to the center of each 20MHz channel while spur_phase_delta (for self-corr in Rx and spur data filter) is defined with respect to the center of current RF channel. So in short, we need to subtract spur_freq_sd (for self-corr in AGC) by the offset between the center of primary20 and the center of RF channel in SW. This offset could be +/10 MHz for dynamic 40. Cc: Madhan Jaganathan Signed-off-by: Kai Shi Signed-off-by: Rajkumar Manoharan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9003_phy.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c index deb6cfb2959a..600aca9fe6b1 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c @@ -373,7 +373,7 @@ static void ar9003_hw_spur_ofdm_work(struct ath_hw *ah, else spur_subchannel_sd = 0; - spur_freq_sd = (freq_offset << 9) / 11; + spur_freq_sd = ((freq_offset + 10) << 9) / 11; } else { if (REG_READ_FIELD(ah, AR_PHY_GEN_CTRL, @@ -382,7 +382,7 @@ static void ar9003_hw_spur_ofdm_work(struct ath_hw *ah, else spur_subchannel_sd = 1; - spur_freq_sd = (freq_offset << 9) / 11; + spur_freq_sd = ((freq_offset - 10) << 9) / 11; } From 5bbdc057c270cc0d672ead03320ed8d7a11bac03 Mon Sep 17 00:00:00 2001 From: Joakim Tjernlund Date: Sun, 29 Apr 2012 22:36:54 +0000 Subject: [PATCH 343/365] net: ucc_geth, increase no. of HW RX descriptors In a busy network we see ucc_geth is dropping RX pkgs every now and then. Increase the RX queues HW descriptors from 16 to 32 to deal with this. Signed-off-by: Joakim Tjernlund Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/ucc_geth.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/freescale/ucc_geth.h b/drivers/net/ethernet/freescale/ucc_geth.h index 2e395a2566b8..f71b3e7b12de 100644 --- a/drivers/net/ethernet/freescale/ucc_geth.h +++ b/drivers/net/ethernet/freescale/ucc_geth.h @@ -877,7 +877,7 @@ struct ucc_geth_hardware_statistics { /* Driver definitions */ #define TX_BD_RING_LEN 0x10 -#define RX_BD_RING_LEN 0x10 +#define RX_BD_RING_LEN 0x20 #define TX_RING_MOD_MASK(size) (size-1) #define RX_RING_MOD_MASK(size) (size-1) From 70f8002d7813ffc5dd9ff3e9d01a17794fb4a4df Mon Sep 17 00:00:00 2001 From: Joakim Tjernlund Date: Sun, 29 Apr 2012 22:36:55 +0000 Subject: [PATCH 344/365] ucc_geth: Add 16 bytes to max TX frame for VLANs Creating a VLAN interface on top of ucc_geth adds 4 bytes to the frame and the HW controller is not prepared to TX a frame bigger than 1518 bytes which is 4 bytes too small for a full VLAN frame. Add 16 bytes which will handle the a simple VLAN and leaves 12 bytes for future expansion. Signed-off-by: Joakim Tjernlund Signed-off-by: David S. Miller --- drivers/net/ethernet/freescale/ucc_geth.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/freescale/ucc_geth.c b/drivers/net/ethernet/freescale/ucc_geth.c index 17a46e76123f..9ac14f804851 100644 --- a/drivers/net/ethernet/freescale/ucc_geth.c +++ b/drivers/net/ethernet/freescale/ucc_geth.c @@ -116,10 +116,10 @@ static struct ucc_geth_info ugeth_primary_info = { .maxGroupAddrInHash = 4, .maxIndAddrInHash = 4, .prel = 7, - .maxFrameLength = 1518, + .maxFrameLength = 1518+16, /* Add extra bytes for VLANs etc. */ .minFrameLength = 64, - .maxD1Length = 1520, - .maxD2Length = 1520, + .maxD1Length = 1520+16, /* Add extra bytes for VLANs etc. */ + .maxD2Length = 1520+16, /* Add extra bytes for VLANs etc. */ .vlantype = 0x8100, .ecamptr = ((uint32_t) NULL), .eventRegMask = UCCE_OTHER, From 720f3d7cb19eb27f85f72836c8f8004ccb257f39 Mon Sep 17 00:00:00 2001 From: "tom.leiming@gmail.com" Date: Sun, 29 Apr 2012 22:51:02 +0000 Subject: [PATCH 345/365] usbnet: fix leak of transfer buffer of dev->interrupt The transfer buffer of dev->interrupt is allocated in .probe path, but not freed in .disconnet path, so mark the interrupt URB as URB_FREE_BUFFER to free the buffer when the URB is destroyed. Signed-off-by: Ming Lei Acked-by: Oliver Neukum Signed-off-by: David S. Miller --- drivers/net/usb/usbnet.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index b7b3f5b0d406..ca6fd80c2b40 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -210,6 +210,7 @@ static int init_status (struct usbnet *dev, struct usb_interface *intf) } else { usb_fill_int_urb(dev->interrupt, dev->udev, pipe, buf, maxp, intr_complete, dev, period); + dev->interrupt->transfer_flags |= URB_FREE_BUFFER; dev_dbg(&intf->dev, "status ep%din, %d bytes period %d\n", usb_pipeendpoint(pipe), maxp, period); From a4723848d05dd31d298c551fb77ad28481309999 Mon Sep 17 00:00:00 2001 From: "tom.leiming@gmail.com" Date: Sun, 29 Apr 2012 22:51:03 +0000 Subject: [PATCH 346/365] usbnet: fix failure handling in usbnet_probe If register_netdev returns failure, the dev->interrupt and its transfer buffer should be released, so just fix it. Signed-off-by: Ming Lei Signed-off-by: David S. Miller --- drivers/net/usb/usbnet.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index ca6fd80c2b40..2d927fb4adf4 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -1444,7 +1444,7 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod) status = register_netdev (net); if (status) - goto out3; + goto out4; netif_info(dev, probe, dev->net, "register '%s' at usb-%s-%s, %s, %pM\n", udev->dev.driver->name, @@ -1462,6 +1462,8 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod) return 0; +out4: + usb_free_urb(dev->interrupt); out3: if (info->unbind) info->unbind (dev, udev); From 4fdcfa12843bca38d0c9deff70c8720e4e8f515f Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Tue, 1 May 2012 08:18:02 +0000 Subject: [PATCH 347/365] drop_monitor: prevent init path from scheduling on the wrong cpu I just noticed after some recent updates, that the init path for the drop monitor protocol has a minor error. drop monitor maintains a per cpu structure, that gets initalized from a single cpu. Normally this is fine, as the protocol isn't in use yet, but I recently made a change that causes a failed skb allocation to reschedule itself . Given the current code, the implication is that this workqueue reschedule will take place on the wrong cpu. If drop monitor is used early during the boot process, its possible that two cpus will access a single per-cpu structure in parallel, possibly leading to data corruption. This patch fixes the situation, by storing the cpu number that a given instance of this per-cpu data should be accessed from. In the case of a need for a reschedule, the cpu stored in the struct is assigned the rescheule, rather than the currently executing cpu Tested successfully by myself. Signed-off-by: Neil Horman CC: David Miller Signed-off-by: David S. Miller --- net/core/drop_monitor.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/net/core/drop_monitor.c b/net/core/drop_monitor.c index 7592943513e3..a7cad741df01 100644 --- a/net/core/drop_monitor.c +++ b/net/core/drop_monitor.c @@ -49,6 +49,7 @@ struct per_cpu_dm_data { struct sk_buff __rcu *skb; atomic_t dm_hit_count; struct timer_list send_timer; + int cpu; }; struct dm_hw_stat_delta { @@ -73,7 +74,6 @@ static int dm_hit_limit = 64; static int dm_delay = 1; static unsigned long dm_hw_check_delta = 2*HZ; static LIST_HEAD(hw_stats_list); -static int initialized = 0; static void reset_per_cpu_data(struct per_cpu_dm_data *data) { @@ -96,8 +96,8 @@ static void reset_per_cpu_data(struct per_cpu_dm_data *data) sizeof(struct net_dm_alert_msg)); msg = nla_data(nla); memset(msg, 0, al); - } else if (initialized) - schedule_work_on(smp_processor_id(), &data->dm_alert_work); + } else + schedule_work_on(data->cpu, &data->dm_alert_work); /* * Don't need to lock this, since we are guaranteed to only @@ -121,6 +121,8 @@ static void send_dm_alert(struct work_struct *unused) struct sk_buff *skb; struct per_cpu_dm_data *data = &get_cpu_var(dm_cpu_data); + WARN_ON_ONCE(data->cpu != smp_processor_id()); + /* * Grab the skb we're about to send */ @@ -404,14 +406,14 @@ static int __init init_net_drop_monitor(void) for_each_present_cpu(cpu) { data = &per_cpu(dm_cpu_data, cpu); - reset_per_cpu_data(data); + data->cpu = cpu; INIT_WORK(&data->dm_alert_work, send_dm_alert); init_timer(&data->send_timer); data->send_timer.data = cpu; data->send_timer.function = sched_send_work; + reset_per_cpu_data(data); } - initialized = 1; goto out; From 84768edbb2721637620b2d84501bb0d5aed603f1 Mon Sep 17 00:00:00 2001 From: Sasha Levin Date: Wed, 2 May 2012 03:58:43 +0000 Subject: [PATCH 348/365] net: l2tp: unlock socket lock before returning from l2tp_ip_sendmsg l2tp_ip_sendmsg could return without releasing socket lock, making it all the way to userspace, and generating the following warning: [ 130.891594] ================================================ [ 130.894569] [ BUG: lock held when returning to user space! ] [ 130.897257] 3.4.0-rc5-next-20120501-sasha #104 Tainted: G W [ 130.900336] ------------------------------------------------ [ 130.902996] trinity/8384 is leaving the kernel with locks still held! [ 130.906106] 1 lock held by trinity/8384: [ 130.907924] #0: (sk_lock-AF_INET){+.+.+.}, at: [] l2tp_ip_sendmsg+0x2f/0x550 Introduced by commit 2f16270 ("l2tp: Fix locking in l2tp_ip.c"). Signed-off-by: Sasha Levin Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- net/l2tp/l2tp_ip.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/l2tp/l2tp_ip.c b/net/l2tp/l2tp_ip.c index 585d93ecee2d..6274f0be82b0 100644 --- a/net/l2tp/l2tp_ip.c +++ b/net/l2tp/l2tp_ip.c @@ -442,8 +442,9 @@ static int l2tp_ip_sendmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *m daddr = lip->l2tp_addr.s_addr; } else { + rc = -EDESTADDRREQ; if (sk->sk_state != TCP_ESTABLISHED) - return -EDESTADDRREQ; + goto out; daddr = inet->inet_daddr; connected = 1; From b49960a05e32121d29316cfdf653894b88ac9190 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 2 May 2012 02:28:41 +0000 Subject: [PATCH 349/365] tcp: change tcp_adv_win_scale and tcp_rmem[2] tcp_adv_win_scale default value is 2, meaning we expect a good citizen skb to have skb->len / skb->truesize ratio of 75% (3/4) In 2.6 kernels we (mis)accounted for typical MSS=1460 frame : 1536 + 64 + 256 = 1856 'estimated truesize', and 1856 * 3/4 = 1392. So these skbs were considered as not bloated. With recent truesize fixes, a typical MSS=1460 frame truesize is now the more precise : 2048 + 256 = 2304. But 2304 * 3/4 = 1728. So these skb are not good citizen anymore, because 1460 < 1728 (GRO can escape this problem because it build skbs with a too low truesize.) This also means tcp advertises a too optimistic window for a given allocated rcvspace : When receiving frames, sk_rmem_alloc can hit sk_rcvbuf limit and we call tcp_prune_queue()/tcp_collapse() too often, especially when application is slow to drain its receive queue or in case of losses (netperf is fast, scp is slow). This is a major latency source. We should adjust the len/truesize ratio to 50% instead of 75% This patch : 1) changes tcp_adv_win_scale default to 1 instead of 2 2) increase tcp_rmem[2] limit from 4MB to 6MB to take into account better truesize tracking and to allow autotuning tcp receive window to reach same value than before. Note that same amount of kernel memory is consumed compared to 2.6 kernels. Signed-off-by: Eric Dumazet Cc: Neal Cardwell Cc: Tom Herbert Cc: Yuchung Cheng Acked-by: Neal Cardwell Signed-off-by: David S. Miller --- Documentation/networking/ip-sysctl.txt | 4 ++-- net/ipv4/tcp.c | 9 +++++---- net/ipv4/tcp_input.c | 2 +- 3 files changed, 8 insertions(+), 7 deletions(-) diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index bd80ba5847d2..1619a8c80873 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -147,7 +147,7 @@ tcp_adv_win_scale - INTEGER (if tcp_adv_win_scale > 0) or bytes-bytes/2^(-tcp_adv_win_scale), if it is <= 0. Possible values are [-31, 31], inclusive. - Default: 2 + Default: 1 tcp_allowed_congestion_control - STRING Show/set the congestion control choices available to non-privileged @@ -410,7 +410,7 @@ tcp_rmem - vector of 3 INTEGERs: min, default, max net.core.rmem_max. Calling setsockopt() with SO_RCVBUF disables automatic tuning of that socket's receive buffer size, in which case this value is ignored. - Default: between 87380B and 4MB, depending on RAM size. + Default: between 87380B and 6MB, depending on RAM size. tcp_sack - BOOLEAN Enable select acknowledgments (SACKS). diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index 8bb6adeb62c0..1272a88c2a63 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -3243,7 +3243,7 @@ void __init tcp_init(void) { struct sk_buff *skb = NULL; unsigned long limit; - int max_share, cnt; + int max_rshare, max_wshare, cnt; unsigned int i; unsigned long jiffy = jiffies; @@ -3303,15 +3303,16 @@ void __init tcp_init(void) tcp_init_mem(&init_net); /* Set per-socket limits to no more than 1/128 the pressure threshold */ limit = nr_free_buffer_pages() << (PAGE_SHIFT - 7); - max_share = min(4UL*1024*1024, limit); + max_wshare = min(4UL*1024*1024, limit); + max_rshare = min(6UL*1024*1024, limit); sysctl_tcp_wmem[0] = SK_MEM_QUANTUM; sysctl_tcp_wmem[1] = 16*1024; - sysctl_tcp_wmem[2] = max(64*1024, max_share); + sysctl_tcp_wmem[2] = max(64*1024, max_wshare); sysctl_tcp_rmem[0] = SK_MEM_QUANTUM; sysctl_tcp_rmem[1] = 87380; - sysctl_tcp_rmem[2] = max(87380, max_share); + sysctl_tcp_rmem[2] = max(87380, max_rshare); pr_info("Hash tables configured (established %u bind %u)\n", tcp_hashinfo.ehash_mask + 1, tcp_hashinfo.bhash_size); diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index d99efd7dfb6c..257b61789eeb 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -85,7 +85,7 @@ int sysctl_tcp_ecn __read_mostly = 2; EXPORT_SYMBOL(sysctl_tcp_ecn); int sysctl_tcp_dsack __read_mostly = 1; int sysctl_tcp_app_win __read_mostly = 31; -int sysctl_tcp_adv_win_scale __read_mostly = 2; +int sysctl_tcp_adv_win_scale __read_mostly = 1; EXPORT_SYMBOL(sysctl_tcp_adv_win_scale); int sysctl_tcp_stdurg __read_mostly; From 5a8887d39e1ba5ee2d4ccb94b14d6f2dce5ddfca Mon Sep 17 00:00:00 2001 From: Gerard Lledo Date: Sat, 28 Apr 2012 08:52:37 +0000 Subject: [PATCH 350/365] sungem: Fix WakeOnLan WakeOnLan was broken in this driver because gp->asleep_wol is a 1-bit bitfield and it was being assigned WAKE_MAGIC, which is (1 << 5). gp->asleep_wol remains 0 and the machine never wakes up. Fixed by casting gp->wake_on_lan to bool. Tested on an iBook G4. Signed-off-by: Gerard Lledo Signed-off-by: David S. Miller --- drivers/net/ethernet/sun/sungem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/sun/sungem.c b/drivers/net/ethernet/sun/sungem.c index 558409ff4058..4ba969096717 100644 --- a/drivers/net/ethernet/sun/sungem.c +++ b/drivers/net/ethernet/sun/sungem.c @@ -2339,7 +2339,7 @@ static int gem_suspend(struct pci_dev *pdev, pm_message_t state) netif_device_detach(dev); /* Switch off chip, remember WOL setting */ - gp->asleep_wol = gp->wake_on_lan; + gp->asleep_wol = !!gp->wake_on_lan; gem_do_stop(dev, gp->asleep_wol); /* Unlock the network stack */ From addde4ec31456c5f1e9b61aae3edcfeb0f338f87 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Wed, 2 May 2012 20:26:24 +0100 Subject: [PATCH 351/365] nouveau: initialise has_optimus variable. We should initialise this to 0 really to avoid getting false positives. Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie --- drivers/gpu/drm/nouveau/nouveau_acpi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/nouveau_acpi.c b/drivers/gpu/drm/nouveau/nouveau_acpi.c index 7814a760c164..284bd25d5d21 100644 --- a/drivers/gpu/drm/nouveau/nouveau_acpi.c +++ b/drivers/gpu/drm/nouveau/nouveau_acpi.c @@ -270,7 +270,7 @@ static bool nouveau_dsm_detect(void) struct acpi_buffer buffer = {sizeof(acpi_method_name), acpi_method_name}; struct pci_dev *pdev = NULL; int has_dsm = 0; - int has_optimus; + int has_optimus = 0; int vga_count = 0; bool guid_valid; int retval; From ab6039a70bb559b2fb5f363934da67d864ccda2a Mon Sep 17 00:00:00 2001 From: Don Skidmore Date: Sat, 17 Mar 2012 05:51:52 +0000 Subject: [PATCH 352/365] ixgbe: fix race condition with shutdown It was possible for shutdown to pull the rug out from other driver entry points. Now we just grab the rtnl lock before taking everything apart. Thanks to Hariharan for noticing this tight race condition. Signed-off-by: Don Skidmore Cc: Hariharan Nagarajan Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 88f6b2e9b72d..d9dbf871abb8 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -4866,10 +4866,12 @@ static int __ixgbe_shutdown(struct pci_dev *pdev, bool *enable_wake) netif_device_detach(netdev); if (netif_running(netdev)) { + rtnl_lock(); ixgbe_down(adapter); ixgbe_free_irq(adapter); ixgbe_free_all_tx_resources(adapter); ixgbe_free_all_rx_resources(adapter); + rtnl_unlock(); } ixgbe_clear_interrupt_scheme(adapter); From f525c6d29501eb483f2d6f742d2f1dc0452b924d Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Wed, 18 Apr 2012 22:42:27 +0000 Subject: [PATCH 353/365] ixgbe: dcb: BIT_APP_UPCHG not set by ixgbe_copy_dcb_cfg() After this commit: commit aacc1bea190d731755a65cb8ec31dd756f4e263e Author: Multanen, Eric W Date: Wed Mar 28 07:49:09 2012 +0000 ixgbe: driver fix for link flap The BIT_APP_UPCHG bit is no longer set when ixgbe_dcbnl_set_all() is called. This results in the FCoE app user priority never getting set and the driver will not configure the tx_rings correctly for FCoE packets which use the SAN MTU and FCoE offloads. We resolve this regression by fixing ixgbe_copy_dcb_cfg() to also check for FCoE application changes. Additionally, we can drop the IEEE variants of get_dcb_app() because this path is never called with the IEEE mode enabled. Signed-off-by: John Fastabend Tested-by: Ross Brattain Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/ixgbe/ixgbe.h | 3 -- .../net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c | 43 +++++++++---------- drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 4 +- 3 files changed, 22 insertions(+), 28 deletions(-) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe.h index 74e192107f9a..81b155589532 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe.h @@ -574,9 +574,6 @@ extern struct ixgbe_info ixgbe_82599_info; extern struct ixgbe_info ixgbe_X540_info; #ifdef CONFIG_IXGBE_DCB extern const struct dcbnl_rtnl_ops dcbnl_ops; -extern int ixgbe_copy_dcb_cfg(struct ixgbe_dcb_config *src_dcb_cfg, - struct ixgbe_dcb_config *dst_dcb_cfg, - int tc_max); #endif extern char ixgbe_driver_name[]; diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c index 652e4b09546d..32e5c02ff6d0 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c @@ -44,18 +44,26 @@ #define DCB_NO_HW_CHG 1 /* DCB configuration did not change */ #define DCB_HW_CHG 2 /* DCB configuration changed, no reset */ -int ixgbe_copy_dcb_cfg(struct ixgbe_dcb_config *scfg, - struct ixgbe_dcb_config *dcfg, int tc_max) +static int ixgbe_copy_dcb_cfg(struct ixgbe_adapter *adapter, int tc_max) { + struct ixgbe_dcb_config *scfg = &adapter->temp_dcb_cfg; + struct ixgbe_dcb_config *dcfg = &adapter->dcb_cfg; struct tc_configuration *src = NULL; struct tc_configuration *dst = NULL; int i, j; int tx = DCB_TX_CONFIG; int rx = DCB_RX_CONFIG; int changes = 0; +#ifdef IXGBE_FCOE + struct dcb_app app = { + .selector = DCB_APP_IDTYPE_ETHTYPE, + .protocol = ETH_P_FCOE, + }; + u8 up = dcb_getapp(adapter->netdev, &app); - if (!scfg || !dcfg) - return changes; + if (up && !(up & (1 << adapter->fcoe.up))) + changes |= BIT_APP_UPCHG; +#endif for (i = DCB_PG_ATTR_TC_0; i < tc_max + DCB_PG_ATTR_TC_0; i++) { src = &scfg->tc_config[i - DCB_PG_ATTR_TC_0]; @@ -332,28 +340,12 @@ static u8 ixgbe_dcbnl_set_all(struct net_device *netdev) struct ixgbe_adapter *adapter = netdev_priv(netdev); int ret = DCB_NO_HW_CHG; int i; -#ifdef IXGBE_FCOE - struct dcb_app app = { - .selector = DCB_APP_IDTYPE_ETHTYPE, - .protocol = ETH_P_FCOE, - }; - u8 up; - - /* In IEEE mode, use the IEEE Ethertype selector value */ - if (adapter->dcbx_cap & DCB_CAP_DCBX_VER_IEEE) { - app.selector = IEEE_8021QAZ_APP_SEL_ETHERTYPE; - up = dcb_ieee_getapp_mask(netdev, &app); - } else { - up = dcb_getapp(netdev, &app); - } -#endif /* Fail command if not in CEE mode */ if (!(adapter->dcbx_cap & DCB_CAP_DCBX_VER_CEE)) return ret; - adapter->dcb_set_bitmap |= ixgbe_copy_dcb_cfg(&adapter->temp_dcb_cfg, - &adapter->dcb_cfg, + adapter->dcb_set_bitmap |= ixgbe_copy_dcb_cfg(adapter, MAX_TRAFFIC_CLASS); if (!adapter->dcb_set_bitmap) return ret; @@ -440,8 +432,13 @@ static u8 ixgbe_dcbnl_set_all(struct net_device *netdev) * FCoE is using changes. This happens if the APP info * changes or the up2tc mapping is updated. */ - if ((up && !(up & (1 << adapter->fcoe.up))) || - (adapter->dcb_set_bitmap & BIT_APP_UPCHG)) { + if (adapter->dcb_set_bitmap & BIT_APP_UPCHG) { + struct dcb_app app = { + .selector = DCB_APP_IDTYPE_ETHTYPE, + .protocol = ETH_P_FCOE, + }; + u8 up = dcb_getapp(netdev, &app); + adapter->fcoe.up = ffs(up) - 1; ixgbe_dcbnl_devreset(netdev); ret = DCB_HW_CHG_RST; diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index d9dbf871abb8..50f0700d250d 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -4418,8 +4418,8 @@ static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter) adapter->dcb_cfg.pfc_mode_enable = false; adapter->dcb_set_bitmap = 0x00; adapter->dcbx_cap = DCB_CAP_DCBX_HOST | DCB_CAP_DCBX_VER_CEE; - ixgbe_copy_dcb_cfg(&adapter->dcb_cfg, &adapter->temp_dcb_cfg, - MAX_TRAFFIC_CLASS); + memcpy(&adapter->temp_dcb_cfg, &adapter->dcb_cfg, + sizeof(adapter->temp_dcb_cfg)); #endif From ed90542b0ce5415050c6fbfca324bccaafa69f2f Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sat, 24 Mar 2012 00:29:46 -0400 Subject: [PATCH 354/365] iwlwifi: fix skb truesize underestimation By default, iwlwifi uses order-1 pages (8 KB) to store incoming frames, but doesnt say so in skb->truesize. This makes very possible to exhaust kernel memory since these skb evade normal socket memory accounting. As struct ieee80211_hdr is going to be pulled before calling IP stack, there is no need to use dev_alloc_skb() to reserve NET_SKB_PAD bytes. alloc_skb() is ok in this driver, allowing more tailroom. Pull beginning of frame in skb header, in the hope we can reuse order-1 pages in the driver immediately for small frames and reduce their truesize to the minimum (linear skbs) Signed-off-by: Eric Dumazet Cc: Wey-Yi Guy Cc: "John W. Linville" Cc: Neal Cardwell Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-agn-rx.c | 21 ++++++++++++------- .../net/wireless/iwlwifi/iwl-trans-pcie-rx.c | 3 ++- drivers/net/wireless/iwlwifi/iwl-trans.h | 1 + 3 files changed, 17 insertions(+), 8 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rx.c b/drivers/net/wireless/iwlwifi/iwl-agn-rx.c index f4b84d1596e3..22474608a70b 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-rx.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-rx.c @@ -773,8 +773,7 @@ static void iwlagn_pass_packet_to_mac80211(struct iwl_priv *priv, struct sk_buff *skb; __le16 fc = hdr->frame_control; struct iwl_rxon_context *ctx; - struct page *p; - int offset; + unsigned int hdrlen, fraglen; /* We only process data packets if the interface is open */ if (unlikely(!priv->is_open)) { @@ -788,16 +787,24 @@ static void iwlagn_pass_packet_to_mac80211(struct iwl_priv *priv, iwlagn_set_decrypted_flag(priv, hdr, ampdu_status, stats)) return; - skb = dev_alloc_skb(128); + /* Dont use dev_alloc_skb(), we'll have enough headroom once + * ieee80211_hdr pulled. + */ + skb = alloc_skb(128, GFP_ATOMIC); if (!skb) { - IWL_ERR(priv, "dev_alloc_skb failed\n"); + IWL_ERR(priv, "alloc_skb failed\n"); return; } + hdrlen = min_t(unsigned int, len, skb_tailroom(skb)); + memcpy(skb_put(skb, hdrlen), hdr, hdrlen); + fraglen = len - hdrlen; - offset = (void *)hdr - rxb_addr(rxb); - p = rxb_steal_page(rxb); - skb_add_rx_frag(skb, 0, p, offset, len, len); + if (fraglen) { + int offset = (void *)hdr + hdrlen - rxb_addr(rxb); + skb_add_rx_frag(skb, 0, rxb_steal_page(rxb), offset, + fraglen, rxb->truesize); + } iwl_update_stats(priv, false, fc, len); /* diff --git a/drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c b/drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c index 8b1a7988e176..aa7aea168138 100644 --- a/drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c +++ b/drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c @@ -374,8 +374,9 @@ static void iwl_rx_handle_rxbuf(struct iwl_trans *trans, if (WARN_ON(!rxb)) return; + rxcb.truesize = PAGE_SIZE << hw_params(trans).rx_page_order; dma_unmap_page(trans->dev, rxb->page_dma, - PAGE_SIZE << hw_params(trans).rx_page_order, + rxcb.truesize, DMA_FROM_DEVICE); rxcb._page = rxb->page; diff --git a/drivers/net/wireless/iwlwifi/iwl-trans.h b/drivers/net/wireless/iwlwifi/iwl-trans.h index 0c81cbaa8088..fdf97886a5e4 100644 --- a/drivers/net/wireless/iwlwifi/iwl-trans.h +++ b/drivers/net/wireless/iwlwifi/iwl-trans.h @@ -260,6 +260,7 @@ static inline void iwl_free_resp(struct iwl_host_cmd *cmd) struct iwl_rx_cmd_buffer { struct page *_page; + unsigned int truesize; }; static inline void *rxb_addr(struct iwl_rx_cmd_buffer *r) From 6868225e3e92399068be9a5f1635752d91012ad5 Mon Sep 17 00:00:00 2001 From: Lin Ming Date: Thu, 3 May 2012 22:15:07 +0800 Subject: [PATCH 355/365] libata: skip old error history when counting probe trials Commit d902747("[libata] Add ATA transport class") introduced ATA_EFLAG_OLD_ER to mark entries in the error ring as cleared. But ata_count_probe_trials_cb() didn't check this flag and it still counts the old error history. So wrong probe trials count is returned and it causes problem, for example, SATA link speed is slowed down from 3.0Gbps to 1.5Gbps. Fix it by checking ATA_EFLAG_OLD_ER in ata_count_probe_trials_cb(). Cc: stable # 2.6.37+ Signed-off-by: Lin Ming Signed-off-by: Jeff Garzik --- drivers/ata/libata-eh.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index c61316e9d2f7..d1fbd59ead16 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -3501,7 +3501,8 @@ static int ata_count_probe_trials_cb(struct ata_ering_entry *ent, void *void_arg u64 now = get_jiffies_64(); int *trials = void_arg; - if (ent->timestamp < now - min(now, interval)) + if ((ent->eflags & ATA_EFLAG_OLD_ER) || + (ent->timestamp < now - min(now, interval))) return -1; (*trials)++; From 642d89252201c4155fc3946bf9cdea409e5d263e Mon Sep 17 00:00:00 2001 From: Matt Johnson Date: Fri, 27 Apr 2012 01:42:30 -0500 Subject: [PATCH 356/365] ahci: Detect Marvell 88SE9172 SATA controller The Marvell 88SE9172 SATA controller (PCI ID 1b4b 917a) already worked once it was detected, but was missing an ahci_pci_tbl entry. Boot tested on a Gigabyte Z68X-UD3H-B3 motherboard. Signed-off-by: Matt Johnson Signed-off-by: Jeff Garzik --- drivers/ata/ahci.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 79a1e9dd56d9..ebaf67e4b2bc 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -394,6 +394,8 @@ static const struct pci_device_id ahci_pci_tbl[] = { .driver_data = board_ahci_yes_fbs }, /* 88se9128 */ { PCI_DEVICE(0x1b4b, 0x9125), .driver_data = board_ahci_yes_fbs }, /* 88se9125 */ + { PCI_DEVICE(0x1b4b, 0x917a), + .driver_data = board_ahci_yes_fbs }, /* 88se9172 */ { PCI_DEVICE(0x1b4b, 0x91a3), .driver_data = board_ahci_yes_fbs }, From a78f57af610ea20559e6c63d90876bc262fdbf37 Mon Sep 17 00:00:00 2001 From: Tero Roponen Date: Sun, 22 Apr 2012 11:38:00 +0300 Subject: [PATCH 357/365] libata: init ata_print_id to 0 When comparing the dmesg between 3.4-rc3 and 3.4-rc4 I found the following differences: -ata1: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff100 irq 47 -ata2: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff180 irq 47 -ata3: DUMMY +ata2: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff100 irq 47 +ata3: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff180 irq 47 ata4: DUMMY ata5: DUMMY -ata6: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff380 irq 47 +ata6: DUMMY +ata7: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff380 irq 47 The change of numbering comes from commit 85d6725b7c0d7e3f ("libata: make ata_print_id atomic") that changed lines like ap->print_id = ata_print_id++; to ap->print_id = atomic_inc_return(&ata_print_id); As the latter behaves like ++ata_print_id, we must initialize it to zero to start the numbering from one. Signed-off-by: Tero Roponen Acked-by: Dan Williams Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 28db50b57b91..23763a1ec570 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -95,7 +95,7 @@ static unsigned int ata_dev_set_xfermode(struct ata_device *dev); static void ata_dev_xfermask(struct ata_device *dev); static unsigned long ata_dev_blacklisted(const struct ata_device *dev); -atomic_t ata_print_id = ATOMIC_INIT(1); +atomic_t ata_print_id = ATOMIC_INIT(0); struct ata_force_param { const char *name; From fb9751d471977be402efa1ee5885a17af78cbc55 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Sat, 21 Apr 2012 17:40:09 +0530 Subject: [PATCH 358/365] ata/pata_arasan_cf: Move arasan_cf_pm_ops out of #ifdef, #endif macros #ifdef, #endif is not required in definition/usage of arasan_cf_pm_ops. So, move this definition and its usage outside of them. Signed-off-by: Viresh Kumar Signed-off-by: Jeff Garzik --- drivers/ata/pata_arasan_cf.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/ata/pata_arasan_cf.c b/drivers/ata/pata_arasan_cf.c index fc2db2a89a6b..3239517f4d90 100644 --- a/drivers/ata/pata_arasan_cf.c +++ b/drivers/ata/pata_arasan_cf.c @@ -943,9 +943,9 @@ static int arasan_cf_resume(struct device *dev) return 0; } +#endif static SIMPLE_DEV_PM_OPS(arasan_cf_pm_ops, arasan_cf_suspend, arasan_cf_resume); -#endif static struct platform_driver arasan_cf_driver = { .probe = arasan_cf_probe, @@ -953,9 +953,7 @@ static struct platform_driver arasan_cf_driver = { .driver = { .name = DRIVER_NAME, .owner = THIS_MODULE, -#ifdef CONFIG_PM .pm = &arasan_cf_pm_ops, -#endif }, }; From 5f098a3ea72e73ad3733c3280fd5ee04816dc999 Mon Sep 17 00:00:00 2001 From: Viresh Kumar Date: Sat, 21 Apr 2012 17:40:12 +0530 Subject: [PATCH 359/365] ata: ahci_platform: Add synopsys ahci controller in DT's compatible list SPEAr13xx series of SoCs contain Synopsys AHCI SATA Controller which shares ahci_platform driver with other controller versions. This patch updates DT compatible list for ahci_platform. It also updates and renames binding documentation to more generic name. Signed-off-by: Viresh Kumar Cc: Rob Herring Signed-off-by: Jeff Garzik --- .../bindings/ata/{calxeda-sata.txt => ahci-platform.txt} | 5 ++--- drivers/ata/ahci_platform.c | 1 + 2 files changed, 3 insertions(+), 3 deletions(-) rename Documentation/devicetree/bindings/ata/{calxeda-sata.txt => ahci-platform.txt} (90%) diff --git a/Documentation/devicetree/bindings/ata/calxeda-sata.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt similarity index 90% rename from Documentation/devicetree/bindings/ata/calxeda-sata.txt rename to Documentation/devicetree/bindings/ata/ahci-platform.txt index 79caa5651f53..8bb8a76d42e8 100644 --- a/Documentation/devicetree/bindings/ata/calxeda-sata.txt +++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt @@ -1,10 +1,10 @@ -* Calxeda SATA Controller +* AHCI SATA Controller SATA nodes are defined to describe on-chip Serial ATA controllers. Each SATA controller should have its own node. Required properties: -- compatible : compatible list, contains "calxeda,hb-ahci" +- compatible : compatible list, contains "calxeda,hb-ahci" or "snps,spear-ahci" - interrupts : - reg : @@ -14,4 +14,3 @@ Example: reg = <0xffe08000 0x1000>; interrupts = <115>; }; - diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c index 0c86c77764bc..9e419e1c2006 100644 --- a/drivers/ata/ahci_platform.c +++ b/drivers/ata/ahci_platform.c @@ -280,6 +280,7 @@ static struct dev_pm_ops ahci_pm_ops = { static const struct of_device_id ahci_of_match[] = { { .compatible = "calxeda,hb-ahci", }, + { .compatible = "snps,spear-ahci", }, {}, }; MODULE_DEVICE_TABLE(of, ahci_of_match); From 54b3a4d311c98ad94b737802a8b5f2c8c6bfd627 Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Thu, 3 May 2012 16:50:46 -0400 Subject: [PATCH 360/365] efivars: Improve variable validation Ben Hutchings pointed out that the validation in efivars was inadequate - most obviously, an entry with size 0 would server as a DoS against the kernel. Improve this based on his suggestions. Signed-off-by: Matthew Garrett Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds --- drivers/firmware/efivars.c | 46 +++++++++++++++++++++++++------------- 1 file changed, 30 insertions(+), 16 deletions(-) diff --git a/drivers/firmware/efivars.c b/drivers/firmware/efivars.c index 891e4674d29b..47408e802ab6 100644 --- a/drivers/firmware/efivars.c +++ b/drivers/firmware/efivars.c @@ -192,18 +192,21 @@ utf16_strncmp(const efi_char16_t *a, const efi_char16_t *b, size_t len) } static bool -validate_device_path(struct efi_variable *var, int match, u8 *buffer, int len) +validate_device_path(struct efi_variable *var, int match, u8 *buffer, + unsigned long len) { struct efi_generic_dev_path *node; int offset = 0; node = (struct efi_generic_dev_path *)buffer; - while (offset < len) { - offset += node->length; + if (len < sizeof(*node)) + return false; - if (offset > len) - return false; + while (offset <= len - sizeof(*node) && + node->length >= sizeof(*node) && + node->length <= len - offset) { + offset += node->length; if ((node->type == EFI_DEV_END_PATH || node->type == EFI_DEV_END_PATH2) && @@ -222,7 +225,8 @@ validate_device_path(struct efi_variable *var, int match, u8 *buffer, int len) } static bool -validate_boot_order(struct efi_variable *var, int match, u8 *buffer, int len) +validate_boot_order(struct efi_variable *var, int match, u8 *buffer, + unsigned long len) { /* An array of 16-bit integers */ if ((len % 2) != 0) @@ -232,19 +236,27 @@ validate_boot_order(struct efi_variable *var, int match, u8 *buffer, int len) } static bool -validate_load_option(struct efi_variable *var, int match, u8 *buffer, int len) +validate_load_option(struct efi_variable *var, int match, u8 *buffer, + unsigned long len) { u16 filepathlength; - int i, desclength = 0; + int i, desclength = 0, namelen; + + namelen = utf16_strnlen(var->VariableName, sizeof(var->VariableName)); /* Either "Boot" or "Driver" followed by four digits of hex */ for (i = match; i < match+4; i++) { - if (hex_to_bin(var->VariableName[i] & 0xff) < 0) + if (var->VariableName[i] > 127 || + hex_to_bin(var->VariableName[i] & 0xff) < 0) return true; } - /* A valid entry must be at least 6 bytes */ - if (len < 6) + /* Reject it if there's 4 digits of hex and then further content */ + if (namelen > match + 4) + return false; + + /* A valid entry must be at least 8 bytes */ + if (len < 8) return false; filepathlength = buffer[4] | buffer[5] << 8; @@ -253,7 +265,7 @@ validate_load_option(struct efi_variable *var, int match, u8 *buffer, int len) * There's no stored length for the description, so it has to be * found by hand */ - desclength = utf16_strsize((efi_char16_t *)(buffer + 6), len) + 2; + desclength = utf16_strsize((efi_char16_t *)(buffer + 6), len - 6) + 2; /* Each boot entry must have a descriptor */ if (!desclength) @@ -275,7 +287,8 @@ validate_load_option(struct efi_variable *var, int match, u8 *buffer, int len) } static bool -validate_uint16(struct efi_variable *var, int match, u8 *buffer, int len) +validate_uint16(struct efi_variable *var, int match, u8 *buffer, + unsigned long len) { /* A single 16-bit integer */ if (len != 2) @@ -285,7 +298,8 @@ validate_uint16(struct efi_variable *var, int match, u8 *buffer, int len) } static bool -validate_ascii_string(struct efi_variable *var, int match, u8 *buffer, int len) +validate_ascii_string(struct efi_variable *var, int match, u8 *buffer, + unsigned long len) { int i; @@ -303,7 +317,7 @@ validate_ascii_string(struct efi_variable *var, int match, u8 *buffer, int len) struct variable_validate { char *name; bool (*validate)(struct efi_variable *var, int match, u8 *data, - int len); + unsigned long len); }; static const struct variable_validate variable_validate[] = { @@ -325,7 +339,7 @@ static const struct variable_validate variable_validate[] = { }; static bool -validate_var(struct efi_variable *var, u8 *data, int len) +validate_var(struct efi_variable *var, u8 *data, unsigned long len) { int i; u16 *unicode_name = var->VariableName; From dad8a3b3eaa0c2ca25368a0b9f65edca84e27a40 Mon Sep 17 00:00:00 2001 From: John Fastabend Date: Mon, 23 Apr 2012 12:22:39 +0000 Subject: [PATCH 361/365] igb, ixgbe: netdev_tx_reset_queue incorrectly called from tx init path igb and ixgbe incorrectly call netdev_tx_reset_queue() from i{gb|xgbe}_clean_tx_ring() this sort of works in most cases except when the number of real tx queues changes. When the number of real tx queues changes netdev_tx_reset_queue() only gets called on the new number of queues so when we reduce the number of queues we risk triggering the watchdog timer and repeated device resets. So this is not only a cosmetic issue but causes real bugs. For example enabling/disabling DCB or FCoE in ixgbe will trigger this. CC: Alexander Duyck Signed-off-by: John Fastabend Tested-by: John Bishop Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/igb/igb_main.c | 4 ++-- drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c | 2 ++ drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 4 ++-- 3 files changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index 5ec31598ee47..d22350055285 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -2771,8 +2771,6 @@ void igb_configure_tx_ring(struct igb_adapter *adapter, txdctl |= E1000_TXDCTL_QUEUE_ENABLE; wr32(E1000_TXDCTL(reg_idx), txdctl); - - netdev_tx_reset_queue(txring_txq(ring)); } /** @@ -3282,6 +3280,8 @@ static void igb_clean_tx_ring(struct igb_ring *tx_ring) igb_unmap_and_free_tx_resource(tx_ring, buffer_info); } + netdev_tx_reset_queue(txring_txq(tx_ring)); + size = sizeof(struct igb_tx_buffer) * tx_ring->count; memset(tx_ring->tx_buffer_info, 0, size); diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c index 31a2bf76a346..cfe7d269590c 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c @@ -1780,6 +1780,8 @@ static u16 ixgbe_clean_test_rings(struct ixgbe_ring *rx_ring, rx_desc = IXGBE_RX_DESC(rx_ring, rx_ntc); } + netdev_tx_reset_queue(txring_txq(tx_ring)); + /* re-map buffers to ring, store next to clean values */ ixgbe_alloc_rx_buffers(rx_ring, count); rx_ring->next_to_clean = rx_ntc; diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index 50f0700d250d..467948e9ecd9 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -2671,8 +2671,6 @@ void ixgbe_configure_tx_ring(struct ixgbe_adapter *adapter, /* enable queue */ IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(reg_idx), txdctl); - netdev_tx_reset_queue(txring_txq(ring)); - /* TXDCTL.EN will return 0 on 82598 if link is down, so skip it */ if (hw->mac.type == ixgbe_mac_82598EB && !(IXGBE_READ_REG(hw, IXGBE_LINKS) & IXGBE_LINKS_UP)) @@ -4167,6 +4165,8 @@ static void ixgbe_clean_tx_ring(struct ixgbe_ring *tx_ring) ixgbe_unmap_and_free_tx_resource(tx_ring, tx_buffer_info); } + netdev_tx_reset_queue(txring_txq(tx_ring)); + size = sizeof(struct ixgbe_tx_buffer) * tx_ring->count; memset(tx_ring->tx_buffer_info, 0, size); From dd7f5c9e5cb24f72140206d3e5961b4cc5a84034 Mon Sep 17 00:00:00 2001 From: Andrei Emeltchenko Date: Sun, 25 Mar 2012 17:49:25 +0000 Subject: [PATCH 362/365] e1000: Silence sparse warnings by correcting type Silence sparse warnings shown below: ... drivers/net/ethernet/intel/e1000/e1000_main.c:3435:17: warning: cast to restricted __le64 drivers/net/ethernet/intel/e1000/e1000_main.c:3435:17: warning: cast to restricted __le64 ... Signed-off-by: Andrei Emeltchenko Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000/e1000_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/intel/e1000/e1000_main.c b/drivers/net/ethernet/intel/e1000/e1000_main.c index 4348b6fd44fa..37caa8885c2a 100644 --- a/drivers/net/ethernet/intel/e1000/e1000_main.c +++ b/drivers/net/ethernet/intel/e1000/e1000_main.c @@ -3380,7 +3380,7 @@ static void e1000_dump(struct e1000_adapter *adapter) for (i = 0; tx_ring->desc && (i < tx_ring->count); i++) { struct e1000_tx_desc *tx_desc = E1000_TX_DESC(*tx_ring, i); struct e1000_buffer *buffer_info = &tx_ring->buffer_info[i]; - struct my_u { u64 a; u64 b; }; + struct my_u { __le64 a; __le64 b; }; struct my_u *u = (struct my_u *)tx_desc; const char *type; @@ -3424,7 +3424,7 @@ rx_ring_summary: for (i = 0; rx_ring->desc && (i < rx_ring->count); i++) { struct e1000_rx_desc *rx_desc = E1000_RX_DESC(*rx_ring, i); struct e1000_buffer *buffer_info = &rx_ring->buffer_info[i]; - struct my_u { u64 a; u64 b; }; + struct my_u { __le64 a; __le64 b; }; struct my_u *u = (struct my_u *)rx_desc; const char *type; From 24f06716cd5dbfc3d737ec2a24ac58ef76f68dc7 Mon Sep 17 00:00:00 2001 From: Ariel Elior Date: Sun, 6 May 2012 07:05:57 +0000 Subject: [PATCH 363/365] bnx2x: bug fix when loading after SAN boot This is a bug fix for an "interface fails to load" issue. The issue occurs when bnx2x driver loads after UNDI driver was previously loaded over the chip. In such a scenario the UNDI driver is loaded and operates in the pre-boot kernel, within its own specific host memory address range. When the pre-boot stage is complete, the real kernel is loaded, in a new and distinct host memory address range. The transition from pre-boot stage to boot is asynchronous from UNDI point of view. A race condition occurs when UNDI driver triggers a DMAE transaction to valid host addresses in the pre-boot stage, when control is diverted to the real kernel. This results in access to illegal addresses by our HW as the addresses which were valid in the preboot stage are no longer considered valid. Specifically, the 'was_error' bit in the pci glue of our device is set. This causes all following pci transactions from chip to host to timeout (in accordance to the pci spec). Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- .../net/ethernet/broadcom/bnx2x/bnx2x_main.c | 23 ++++++++++++++++++- 1 file changed, 22 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index e077d2508727..6af310195bae 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -9122,13 +9122,34 @@ static int __devinit bnx2x_prev_unload_common(struct bnx2x *bp) return bnx2x_prev_mcp_done(bp); } +/* previous driver DMAE transaction may have occurred when pre-boot stage ended + * and boot began, or when kdump kernel was loaded. Either case would invalidate + * the addresses of the transaction, resulting in was-error bit set in the pci + * causing all hw-to-host pcie transactions to timeout. If this happened we want + * to clear the interrupt which detected this from the pglueb and the was done + * bit + */ +static void __devinit bnx2x_prev_interrupted_dmae(struct bnx2x *bp) +{ + u32 val = REG_RD(bp, PGLUE_B_REG_PGLUE_B_INT_STS); + if (val & PGLUE_B_PGLUE_B_INT_STS_REG_WAS_ERROR_ATTN) { + BNX2X_ERR("was error bit was found to be set in pglueb upon startup. Clearing"); + REG_WR(bp, PGLUE_B_REG_WAS_ERROR_PF_7_0_CLR, 1 << BP_FUNC(bp)); + } +} + static int __devinit bnx2x_prev_unload(struct bnx2x *bp) { int time_counter = 10; u32 rc, fw, hw_lock_reg, hw_lock_val; BNX2X_DEV_INFO("Entering Previous Unload Flow\n"); - /* Release previously held locks */ + /* clear hw from errors which may have resulted from an interrupted + * dmae transaction. + */ + bnx2x_prev_interrupted_dmae(bp); + + /* Release previously held locks */ hw_lock_reg = (BP_FUNC(bp) <= 5) ? (MISC_REG_DRIVER_CONTROL_1 + BP_FUNC(bp) * 8) : (MISC_REG_DRIVER_CONTROL_7 + (BP_FUNC(bp) - 6) * 8); From 6eddcb4c82883451aec3be1240f17793370fa62f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Thu, 26 Apr 2012 02:35:10 +0000 Subject: [PATCH 364/365] cdc_ether: Ignore bogus union descriptor for RNDIS devices MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Some RNDIS devices include a bogus CDC Union descriptor pointing to non-existing interfaces. The RNDIS code is already prepared to handle devices without a CDC Union descriptor by hardwiring the driver to use interfaces 0 and 1, which is correct for the devices with the bogus descriptor as well. So we can reuse the existing workaround. Cc: Markus Kolb Cc: Iker Salmón San Millán Cc: Jonathan Nieder Cc: Oliver Neukum Cc: 655387@bugs.debian.org Cc: stable@vger.kernel.org Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller --- drivers/net/usb/cdc_ether.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c index 90a30026a931..00880edba048 100644 --- a/drivers/net/usb/cdc_ether.c +++ b/drivers/net/usb/cdc_ether.c @@ -83,6 +83,7 @@ int usbnet_generic_cdc_bind(struct usbnet *dev, struct usb_interface *intf) struct cdc_state *info = (void *) &dev->data; int status; int rndis; + bool android_rndis_quirk = false; struct usb_driver *driver = driver_of(intf); struct usb_cdc_mdlm_desc *desc = NULL; struct usb_cdc_mdlm_detail_desc *detail = NULL; @@ -195,6 +196,11 @@ int usbnet_generic_cdc_bind(struct usbnet *dev, struct usb_interface *intf) info->control, info->u->bSlaveInterface0, info->data); + /* fall back to hard-wiring for RNDIS */ + if (rndis) { + android_rndis_quirk = true; + goto next_desc; + } goto bad_desc; } if (info->control != intf) { @@ -271,11 +277,15 @@ next_desc: /* Microsoft ActiveSync based and some regular RNDIS devices lack the * CDC descriptors, so we'll hard-wire the interfaces and not check * for descriptors. + * + * Some Android RNDIS devices have a CDC Union descriptor pointing + * to non-existing interfaces. Ignore that and attempt the same + * hard-wired 0 and 1 interfaces. */ - if (rndis && !info->u) { + if (rndis && (!info->u || android_rndis_quirk)) { info->control = usb_ifnum_to_if(dev->udev, 0); info->data = usb_ifnum_to_if(dev->udev, 1); - if (!info->control || !info->data) { + if (!info->control || !info->data || info->control != intf) { dev_dbg(&intf->dev, "rndis: master #0/%p slave #1/%p\n", info->control, From 1c430a727fa512500a422ffe4712166c550ea06a Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 7 May 2012 15:39:06 +0200 Subject: [PATCH 365/365] net: compare_ether_addr[_64bits]() has no ordering Neither compare_ether_addr() nor compare_ether_addr_64bits() (as it can fall back to the former) have comparison semantics like memcmp() where the sign of the return value indicates sort order. We had a bug in the wireless code due to a blind memcmp replacement because of this. A cursory look suggests that the wireless bug was the only one due to this semantic difference. Signed-off-by: Johannes Berg Signed-off-by: David S. Miller --- include/linux/etherdevice.h | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/include/linux/etherdevice.h b/include/linux/etherdevice.h index 8a1835855faa..fe5136d81454 100644 --- a/include/linux/etherdevice.h +++ b/include/linux/etherdevice.h @@ -159,7 +159,8 @@ static inline void eth_hw_addr_random(struct net_device *dev) * @addr1: Pointer to a six-byte array containing the Ethernet address * @addr2: Pointer other six-byte array containing the Ethernet address * - * Compare two ethernet addresses, returns 0 if equal + * Compare two ethernet addresses, returns 0 if equal, non-zero otherwise. + * Unlike memcmp(), it doesn't return a value suitable for sorting. */ static inline unsigned compare_ether_addr(const u8 *addr1, const u8 *addr2) { @@ -184,10 +185,10 @@ static inline unsigned long zap_last_2bytes(unsigned long value) * @addr1: Pointer to an array of 8 bytes * @addr2: Pointer to an other array of 8 bytes * - * Compare two ethernet addresses, returns 0 if equal. - * Same result than "memcmp(addr1, addr2, ETH_ALEN)" but without conditional - * branches, and possibly long word memory accesses on CPU allowing cheap - * unaligned memory reads. + * Compare two ethernet addresses, returns 0 if equal, non-zero otherwise. + * Unlike memcmp(), it doesn't return a value suitable for sorting. + * The function doesn't need any conditional branches and possibly uses + * word memory accesses on CPU allowing cheap unaligned memory reads. * arrays = { byte1, byte2, byte3, byte4, byte6, byte7, pad1, pad2} * * Please note that alignment of addr1 & addr2 is only guaranted to be 16 bits.