diff --git a/Documentation/devicetree/bindings/iio/st-sensors.txt b/Documentation/devicetree/bindings/iio/st-sensors.txt
index 71b7bdff21cd..637e283f4a8b 100644
--- a/Documentation/devicetree/bindings/iio/st-sensors.txt
+++ b/Documentation/devicetree/bindings/iio/st-sensors.txt
@@ -16,6 +16,10 @@ Optional properties:
 - st,drdy-int-pin: the pin on the package that will be used to signal
   "data ready" (valid values: 1 or 2). This property is not configurable
   on all sensors.
+- drive-open-drain: the interrupt/data ready line will be configured
+  as open drain, which is useful if several sensors share the same
+  interrupt line. (This binding is taken from pinctrl/pinctrl-bindings.txt)
+  This is a boolean property.
 
 Sensors may also have applicable pin control settings, those use the
 standard bindings from pinctrl/pinctrl-bindings.txt.
diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
index 9fb6d35fce5b..dc73f2d85e6d 100644
--- a/drivers/iio/accel/st_accel_core.c
+++ b/drivers/iio/accel/st_accel_core.c
@@ -99,6 +99,8 @@
 #define ST_ACCEL_2_DRDY_IRQ_INT2_MASK		0x10
 #define ST_ACCEL_2_IHL_IRQ_ADDR			0x22
 #define ST_ACCEL_2_IHL_IRQ_MASK			0x80
+#define ST_ACCEL_2_OD_IRQ_ADDR			0x22
+#define ST_ACCEL_2_OD_IRQ_MASK			0x40
 #define ST_ACCEL_2_MULTIREAD_BIT		true
 
 /* CUSTOM VALUES FOR SENSOR 3 */
@@ -180,6 +182,8 @@
 #define ST_ACCEL_5_DRDY_IRQ_INT2_MASK		0x20
 #define ST_ACCEL_5_IHL_IRQ_ADDR			0x22
 #define ST_ACCEL_5_IHL_IRQ_MASK			0x80
+#define ST_ACCEL_5_OD_IRQ_ADDR			0x22
+#define ST_ACCEL_5_OD_IRQ_MASK			0x40
 #define ST_ACCEL_5_IG1_EN_ADDR			0x21
 #define ST_ACCEL_5_IG1_EN_MASK			0x08
 #define ST_ACCEL_5_MULTIREAD_BIT		false
@@ -398,6 +402,8 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
 			.mask_int2 = ST_ACCEL_2_DRDY_IRQ_INT2_MASK,
 			.addr_ihl = ST_ACCEL_2_IHL_IRQ_ADDR,
 			.mask_ihl = ST_ACCEL_2_IHL_IRQ_MASK,
+			.addr_od = ST_ACCEL_2_OD_IRQ_ADDR,
+			.mask_od = ST_ACCEL_2_OD_IRQ_MASK,
 			.addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
 		},
 		.multi_read_bit = ST_ACCEL_2_MULTIREAD_BIT,
@@ -587,6 +593,8 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
 			.mask_int2 = ST_ACCEL_5_DRDY_IRQ_INT2_MASK,
 			.addr_ihl = ST_ACCEL_5_IHL_IRQ_ADDR,
 			.mask_ihl = ST_ACCEL_5_IHL_IRQ_MASK,
+			.addr_od = ST_ACCEL_5_OD_IRQ_ADDR,
+			.mask_od = ST_ACCEL_5_OD_IRQ_MASK,
 			.addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
 		},
 		.multi_read_bit = ST_ACCEL_5_MULTIREAD_BIT,
diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c
index f5a2d445d0c0..dffe00692169 100644
--- a/drivers/iio/common/st_sensors/st_sensors_core.c
+++ b/drivers/iio/common/st_sensors/st_sensors_core.c
@@ -301,6 +301,14 @@ static int st_sensors_set_drdy_int_pin(struct iio_dev *indio_dev,
 		return -EINVAL;
 	}
 
+	if (pdata->open_drain) {
+		if (!sdata->sensor_settings->drdy_irq.addr_od)
+			dev_err(&indio_dev->dev,
+				"open drain requested but unsupported.\n");
+		else
+			sdata->int_pin_open_drain = true;
+	}
+
 	return 0;
 }
 
@@ -321,6 +329,8 @@ static struct st_sensors_platform_data *st_sensors_of_probe(struct device *dev,
 	else
 		pdata->drdy_int_pin = defdata ? defdata->drdy_int_pin : 0;
 
+	pdata->open_drain = of_property_read_bool(np, "drive-open-drain");
+
 	return pdata;
 }
 #else
@@ -374,6 +384,16 @@ int st_sensors_init_sensor(struct iio_dev *indio_dev,
 			return err;
 	}
 
+	if (sdata->int_pin_open_drain) {
+		dev_info(&indio_dev->dev,
+			 "set interrupt line to open drain mode\n");
+		err = st_sensors_write_data_with_mask(indio_dev,
+				sdata->sensor_settings->drdy_irq.addr_od,
+				sdata->sensor_settings->drdy_irq.mask_od, 1);
+		if (err < 0)
+			return err;
+	}
+
 	err = st_sensors_set_axis_enable(indio_dev, ST_SENSORS_ENABLE_ALL_AXIS);
 
 	return err;
diff --git a/drivers/iio/common/st_sensors/st_sensors_trigger.c b/drivers/iio/common/st_sensors/st_sensors_trigger.c
index 6a8c98327945..da72279fcf99 100644
--- a/drivers/iio/common/st_sensors/st_sensors_trigger.c
+++ b/drivers/iio/common/st_sensors/st_sensors_trigger.c
@@ -64,6 +64,19 @@ int st_sensors_allocate_trigger(struct iio_dev *indio_dev,
 			"rising edge\n", irq_trig);
 		irq_trig = IRQF_TRIGGER_RISING;
 	}
+
+	/*
+	 * If the interrupt pin is Open Drain, by definition this
+	 * means that the interrupt line may be shared with other
+	 * peripherals. But to do this we also need to have a status
+	 * register and mask to figure out if this sensor was firing
+	 * the IRQ or not, so we can tell the interrupt handle that
+	 * it was "our" interrupt.
+	 */
+	if (sdata->int_pin_open_drain &&
+	    sdata->sensor_settings->drdy_irq.addr_stat_drdy)
+		irq_trig |= IRQF_SHARED;
+
 	err = request_threaded_irq(irq,
 			iio_trigger_generic_data_rdy_poll,
 			NULL,
diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c
index 1cd37eaa4a57..9e9b72a8f18f 100644
--- a/drivers/iio/pressure/st_pressure_core.c
+++ b/drivers/iio/pressure/st_pressure_core.c
@@ -64,6 +64,8 @@
 #define ST_PRESS_LPS331AP_DRDY_IRQ_INT2_MASK	0x20
 #define ST_PRESS_LPS331AP_IHL_IRQ_ADDR		0x22
 #define ST_PRESS_LPS331AP_IHL_IRQ_MASK		0x80
+#define ST_PRESS_LPS331AP_OD_IRQ_ADDR		0x22
+#define ST_PRESS_LPS331AP_OD_IRQ_MASK		0x40
 #define ST_PRESS_LPS331AP_MULTIREAD_BIT		true
 #define ST_PRESS_LPS331AP_TEMP_OFFSET		42500
 
@@ -104,6 +106,8 @@
 #define ST_PRESS_LPS25H_DRDY_IRQ_INT2_MASK	0x10
 #define ST_PRESS_LPS25H_IHL_IRQ_ADDR		0x22
 #define ST_PRESS_LPS25H_IHL_IRQ_MASK		0x80
+#define ST_PRESS_LPS25H_OD_IRQ_ADDR		0x22
+#define ST_PRESS_LPS25H_OD_IRQ_MASK		0x40
 #define ST_PRESS_LPS25H_MULTIREAD_BIT		true
 #define ST_PRESS_LPS25H_TEMP_OFFSET		42500
 #define ST_PRESS_LPS25H_OUT_XL_ADDR		0x28
@@ -226,6 +230,8 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
 			.mask_int2 = ST_PRESS_LPS331AP_DRDY_IRQ_INT2_MASK,
 			.addr_ihl = ST_PRESS_LPS331AP_IHL_IRQ_ADDR,
 			.mask_ihl = ST_PRESS_LPS331AP_IHL_IRQ_MASK,
+			.addr_od = ST_PRESS_LPS331AP_OD_IRQ_ADDR,
+			.mask_od = ST_PRESS_LPS331AP_OD_IRQ_MASK,
 			.addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
 		},
 		.multi_read_bit = ST_PRESS_LPS331AP_MULTIREAD_BIT,
@@ -313,6 +319,8 @@ static const struct st_sensor_settings st_press_sensors_settings[] = {
 			.mask_int2 = ST_PRESS_LPS25H_DRDY_IRQ_INT2_MASK,
 			.addr_ihl = ST_PRESS_LPS25H_IHL_IRQ_ADDR,
 			.mask_ihl = ST_PRESS_LPS25H_IHL_IRQ_MASK,
+			.addr_od = ST_PRESS_LPS25H_OD_IRQ_ADDR,
+			.mask_od = ST_PRESS_LPS25H_OD_IRQ_MASK,
 			.addr_stat_drdy = ST_SENSORS_DEFAULT_STAT_ADDR,
 		},
 		.multi_read_bit = ST_PRESS_LPS25H_MULTIREAD_BIT,
diff --git a/include/linux/iio/common/st_sensors.h b/include/linux/iio/common/st_sensors.h
index d8da075bfda0..d029ffac0d69 100644
--- a/include/linux/iio/common/st_sensors.h
+++ b/include/linux/iio/common/st_sensors.h
@@ -122,6 +122,8 @@ struct st_sensor_bdu {
  * @mask_int2: mask to enable/disable IRQ on INT2 pin.
  * @addr_ihl: address to enable/disable active low on the INT lines.
  * @mask_ihl: mask to enable/disable active low on the INT lines.
+ * @addr_od: address to enable/disable Open Drain on the INT lines.
+ * @mask_od: mask to enable/disable Open Drain on the INT lines.
  * @addr_stat_drdy: address to read status of DRDY (data ready) interrupt
  * struct ig1 - represents the Interrupt Generator 1 of sensors.
  * @en_addr: address of the enable ig1 register.
@@ -133,6 +135,8 @@ struct st_sensor_data_ready_irq {
 	u8 mask_int2;
 	u8 addr_ihl;
 	u8 mask_ihl;
+	u8 addr_od;
+	u8 mask_od;
 	u8 addr_stat_drdy;
 	struct {
 		u8 en_addr;
@@ -215,6 +219,7 @@ struct st_sensor_settings {
  * @odr: Output data rate of the sensor [Hz].
  * num_data_channels: Number of data channels used in buffer.
  * @drdy_int_pin: Redirect DRDY on pin 1 (1) or pin 2 (2).
+ * @int_pin_open_drain: Set the interrupt/DRDY to open drain.
  * @get_irq_data_ready: Function to get the IRQ used for data ready signal.
  * @tf: Transfer function structure used by I/O operations.
  * @tb: Transfer buffers and mutex used by I/O operations.
@@ -236,6 +241,7 @@ struct st_sensor_data {
 	unsigned int num_data_channels;
 
 	u8 drdy_int_pin;
+	bool int_pin_open_drain;
 
 	unsigned int (*get_irq_data_ready) (struct iio_dev *indio_dev);
 
diff --git a/include/linux/platform_data/st_sensors_pdata.h b/include/linux/platform_data/st_sensors_pdata.h
index 753839187ba0..79b0e4cdb814 100644
--- a/include/linux/platform_data/st_sensors_pdata.h
+++ b/include/linux/platform_data/st_sensors_pdata.h
@@ -16,9 +16,11 @@
  * @drdy_int_pin: Redirect DRDY on pin 1 (1) or pin 2 (2).
  *	Available only for accelerometer and pressure sensors.
  *	Accelerometer DRDY on LSM330 available only on pin 1 (see datasheet).
+ * @open_drain: set the interrupt line to be open drain if possible.
  */
 struct st_sensors_platform_data {
 	u8 drdy_int_pin;
+	bool open_drain;
 };
 
 #endif /* ST_SENSORS_PDATA_H */